From 27ff621cd9a5347efda4be502abbef13a99146ce Mon Sep 17 00:00:00 2001 From: Maarten ter Huurne Date: Sun, 29 Aug 2010 08:11:00 +0200 Subject: [PATCH 11/21] MIPS: JZ4740: Added setting of PLL rate and main dividers. This functionality makes a cpufreq driver possible. Squashed version of the development done in the jz-2.6.39 branch. --- arch/mips/jz4740/clock.c | 230 ++++++++++++++++++++++++++++++++++++++++++++-- arch/mips/jz4740/clock.h | 4 + 2 files changed, 224 insertions(+), 10 deletions(-) diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c index 118a8a5..da423d1 100644 --- a/arch/mips/jz4740/clock.c +++ b/arch/mips/jz4740/clock.c @@ -1,5 +1,8 @@ /* + * Copyright (c) 2006-2007, Ingenic Semiconductor Inc. * Copyright (C) 2010, Lars-Peter Clausen + * Copyright (c) 2010, Ulrich Hecht + * Copyright (c) 2010, Maarten ter Huurne * JZ4740 SoC clock support * * This program is free software; you can redistribute it and/or modify it @@ -41,16 +44,20 @@ #define JZ_CLOCK_CTRL_I2S_SRC_PLL BIT(31) #define JZ_CLOCK_CTRL_KO_ENABLE BIT(30) #define JZ_CLOCK_CTRL_UDC_SRC_PLL BIT(29) -#define JZ_CLOCK_CTRL_UDIV_MASK 0x1f800000 #define JZ_CLOCK_CTRL_CHANGE_ENABLE BIT(22) #define JZ_CLOCK_CTRL_PLL_HALF BIT(21) -#define JZ_CLOCK_CTRL_LDIV_MASK 0x001f0000 #define JZ_CLOCK_CTRL_UDIV_OFFSET 23 #define JZ_CLOCK_CTRL_LDIV_OFFSET 16 #define JZ_CLOCK_CTRL_MDIV_OFFSET 12 #define JZ_CLOCK_CTRL_PDIV_OFFSET 8 #define JZ_CLOCK_CTRL_HDIV_OFFSET 4 #define JZ_CLOCK_CTRL_CDIV_OFFSET 0 +#define JZ_CLOCK_CTRL_UDIV_MASK (0x3f << JZ_CLOCK_CTRL_UDIV_OFFSET) +#define JZ_CLOCK_CTRL_LDIV_MASK (0x1f << JZ_CLOCK_CTRL_LDIV_OFFSET) +#define JZ_CLOCK_CTRL_MDIV_MASK (0x0f << JZ_CLOCK_CTRL_MDIV_OFFSET) +#define JZ_CLOCK_CTRL_PDIV_MASK (0x0f << JZ_CLOCK_CTRL_PDIV_OFFSET) +#define JZ_CLOCK_CTRL_HDIV_MASK (0x0f << JZ_CLOCK_CTRL_HDIV_OFFSET) +#define JZ_CLOCK_CTRL_CDIV_MASK (0x0f << JZ_CLOCK_CTRL_CDIV_OFFSET) #define JZ_CLOCK_GATE_UART0 BIT(0) #define JZ_CLOCK_GATE_TCU BIT(1) @@ -90,6 +97,7 @@ #define JZ_CLOCK_PLL_M_OFFSET 23 #define JZ_CLOCK_PLL_N_OFFSET 18 #define JZ_CLOCK_PLL_OD_OFFSET 16 +#define JZ_CLOCK_PLL_STABILIZE_OFFSET 0 #define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2) #define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0) @@ -97,10 +105,15 @@ #define JZ_CLOCK_SLEEP_CTRL_SUSPEND_UHC BIT(7) #define JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC BIT(6) +#define JZ_REG_EMC_RTCNT 0x88 +#define JZ_REG_EMC_RTCOR 0x8C + static void __iomem *jz_clock_base; static spinlock_t jz_clock_lock; static LIST_HEAD(jz_clocks); +static void __iomem *jz_emc_base; + struct main_clk { struct clk clk; uint32_t div_offset; @@ -204,25 +217,88 @@ static int jz_clk_ko_is_enabled(struct clk *clk) return !!(jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_KO_ENABLE); } +static struct static_clk jz_clk_ext; + +static unsigned long jz_clk_pll_calc_rate( + unsigned int in_div, unsigned int feedback, unsigned int out_div) +{ + return ((jz_clk_ext.rate / in_div) * feedback) / out_div; +} + +static void jz_clk_pll_calc_dividers(unsigned long rate, + unsigned int *in_div, unsigned int *feedback, unsigned int *out_div) +{ + unsigned int target; + + /* The frequency after the input divider must be between 1 and 15 MHz. + The highest divider yields the best resolution. */ + *in_div = jz_clk_ext.rate / 1000000; + if (*in_div >= 34) + *in_div = 33; + + /* The frequency before the output divider must be between 100 and + 500 MHz. The lowest target rate is more energy efficient. */ + if (rate < 25000000) { + *out_div = 4; + target = 25000000 * 4; + } else if (rate <= 50000000) { + *out_div = 4; + target = rate * 4; + } else if (rate <= 100000000) { + *out_div = 2; + target = rate * 2; + } else if (rate <= 500000000) { + *out_div = 1; + target = rate; + } else { + *out_div = 1; + target = 500000000; + } + + /* Compute the feedback divider. + Since the divided input is at least 1 MHz and the target frequency + at most 500 MHz, the feedback will be at most 500 and will therefore + always fit in the 9-bit register. + Similarly, the divided input is at most 15 MHz and the target + frequency at least 100 MHz, so the feedback will be at least 6 + where the minimum supported value is 2. */ + *feedback = ((target / 1000) * *in_div) / (jz_clk_ext.rate / 1000); +} + +static unsigned long jz_clk_pll_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned int in_div, feedback, out_div; + /* The PLL frequency must be a multiple of 24 MHz, since the LCD pixel + * clock must be exactly 12 MHz for the TV-out to work. + * TODO: A multiple of 12 MHz for the PLL would work if the PLL would + * not be divided by 2 before being passed to the set of derived + * clocks that includes the LCD pixel clock. + * TODO: Systemwide decisions like this should be made by the board + * support code, so add some kind of hook for that. + */ + unsigned long rate24 = (rate / 24000000) * 24000000; + + jz_clk_pll_calc_dividers(rate24, &in_div, &feedback, &out_div); + return jz_clk_pll_calc_rate(in_div, feedback, out_div); +} + static const int pllno[] = {1, 2, 2, 4}; static unsigned long jz_clk_pll_get_rate(struct clk *clk) { uint32_t val; - int m; - int n; - int od; + unsigned int in_div, feedback, out_div; val = jz_clk_reg_read(JZ_REG_CLOCK_PLL); if (val & JZ_CLOCK_PLL_BYPASS) return clk_get_rate(clk->parent); - m = ((val >> 23) & 0x1ff) + 2; - n = ((val >> 18) & 0x1f) + 2; - od = (val >> 16) & 0x3; + feedback = ((val >> 23) & 0x1ff) + 2; + in_div = ((val >> 18) & 0x1f) + 2; + out_div = pllno[(val >> 16) & 0x3]; - return ((clk_get_rate(clk->parent) / n) * m) / pllno[od]; + return jz_clk_pll_calc_rate(in_div, feedback, out_div); } static unsigned long jz_clk_pll_half_get_rate(struct clk *clk) @@ -235,7 +311,77 @@ static unsigned long jz_clk_pll_half_get_rate(struct clk *clk) return jz_clk_pll_get_rate(clk->parent) >> 1; } -static const int jz_clk_main_divs[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32}; +#define SDRAM_TREF 15625 /* Refresh period: 4096 refresh cycles/64ms */ + +static void sdram_set_pll(unsigned int pllin) +{ + unsigned int ns, sdramclock; + + ns = 1000000000 / pllin; + sdramclock = (SDRAM_TREF / ns) / 64 + 1; + if (sdramclock > 0xff) sdramclock = 0xff; + /* Set refresh registers */ + writew(sdramclock, jz_emc_base + JZ_REG_EMC_RTCOR); + writew(sdramclock, jz_emc_base + JZ_REG_EMC_RTCNT); +} + +static int jz_clk_pll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int ctrl, plcr1; + unsigned int feedback, in_div, out_div, pllout, pllout2; + + jz_clk_pll_calc_dividers(rate, &in_div, &feedback, &out_div); + + ctrl = jz_clk_reg_read(JZ_REG_CLOCK_CTRL); + pllout = jz_clk_pll_calc_rate(in_div, feedback, out_div); + pllout2 = (ctrl & JZ_CLOCK_CTRL_PLL_HALF) ? pllout : (pllout / 2); + + /* Init UHC clock */ + writel(pllout2 / 48000000 - 1, jz_clock_base + JZ_REG_CLOCK_UHC); + + plcr1 = ((feedback - 2) << JZ_CLOCK_PLL_M_OFFSET) | + ((in_div - 2) << JZ_CLOCK_PLL_N_OFFSET) | + ((out_div - 1) << JZ_CLOCK_PLL_OD_OFFSET) | + (0x20 << JZ_CLOCK_PLL_STABILIZE_OFFSET) | + JZ_CLOCK_PLL_ENABLED; + + sdram_set_pll(pllout); + + /* LCD pixclock */ + writel(pllout2 / 12000000 - 1, jz_clock_base + JZ_REG_CLOCK_LCD); + + /* configure PLL */ + __asm__ __volatile__( + ".set noreorder\n\t" + ".align 5\n" + "sw %1,0(%0)\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + ".set reorder\n\t" + : + : "r" (jz_clock_base + JZ_REG_CLOCK_PLL), "r" (plcr1)); + + /* MtH: For some reason the MSC will have problems if this flag is not + restored, even though the MSC is supposedly the only divider + that is not affected by this flag. */ + jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_CHANGE_ENABLE); + + return 0; +} + +static const unsigned int jz_clk_main_divs[] = { + 1, 2, 3, 4, 6, 8, 12, 16, 24, 32 +}; +static const unsigned int jz_clk_main_divs_inv[] = { + -1, 0, 1, 2, 3, -1, 4, -1, 5, -1, -1, -1, 6, -1, -1, -1, + 7, -1, -1, -1, -1, -1, -1, -1, 8, -1, -1, -1, -1, -1, -1, -1, + 9 +}; static unsigned long jz_clk_main_round_rate(struct clk *clk, unsigned long rate) { @@ -290,6 +436,64 @@ static int jz_clk_main_set_rate(struct clk *clk, unsigned long rate) return 0; } +static struct main_clk jz_clk_cpu; + +int clk_main_set_dividers(bool immediate, unsigned int cdiv, unsigned int hdiv, + unsigned int mdiv, unsigned int pdiv) +{ + unsigned int cdiv_enc, hdiv_enc, mdiv_enc, pdiv_enc; + unsigned int ctrl; + unsigned int tmp, wait; + + if (cdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) || + hdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) || + mdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) || + pdiv >= ARRAY_SIZE(jz_clk_main_divs_inv)) + return -EINVAL; + cdiv_enc = jz_clk_main_divs_inv[cdiv]; + hdiv_enc = jz_clk_main_divs_inv[hdiv]; + mdiv_enc = jz_clk_main_divs_inv[mdiv]; + pdiv_enc = jz_clk_main_divs_inv[pdiv]; + if (cdiv_enc == (unsigned int)-1 || + hdiv_enc == (unsigned int)-1 || + mdiv_enc == (unsigned int)-1 || + pdiv_enc == (unsigned int)-1) + return -EINVAL; + + ctrl = jz_clk_reg_read(JZ_REG_CLOCK_CTRL); + ctrl &= ~(JZ_CLOCK_CTRL_CHANGE_ENABLE | + JZ_CLOCK_CTRL_CDIV_MASK | JZ_CLOCK_CTRL_HDIV_MASK | + JZ_CLOCK_CTRL_MDIV_MASK | JZ_CLOCK_CTRL_PDIV_MASK); + if (immediate) ctrl |= JZ_CLOCK_CTRL_CHANGE_ENABLE; + ctrl |= (cdiv_enc << JZ_CLOCK_CTRL_CDIV_OFFSET) | + (hdiv_enc << JZ_CLOCK_CTRL_HDIV_OFFSET) | + (mdiv_enc << JZ_CLOCK_CTRL_MDIV_OFFSET) | + (pdiv_enc << JZ_CLOCK_CTRL_PDIV_OFFSET); + + /* set dividers */ + /* delay loops lifted from the old Ingenic cpufreq driver */ + wait = ((clk_get_rate(&jz_clk_cpu.clk) / 1000000) * 500) / 1000; + __asm__ __volatile__( + ".set noreorder\n\t" + ".align 5\n" + "sw %2,0(%1)\n\t" + "li %0,0\n\t" + "1:\n\t" + "bne %0,%3,1b\n\t" + "addi %0, 1\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + ".set reorder\n\t" + : "=r" (tmp) + : "r" (jz_clock_base + JZ_REG_CLOCK_CTRL), "r" (ctrl), + "r" (wait)); + + return 0; +} +EXPORT_SYMBOL_GPL(clk_main_set_dividers); + static struct clk_ops jz_clk_static_ops = { .get_rate = jz_clk_static_get_rate, .enable = jz_clk_enable_gating, @@ -307,6 +511,8 @@ static struct static_clk jz_clk_ext = { static struct clk_ops jz_clk_pll_ops = { .get_rate = jz_clk_pll_get_rate, + .set_rate = jz_clk_pll_set_rate, + .round_rate = jz_clk_pll_round_rate, }; static struct clk jz_clk_pll = { @@ -897,6 +1103,10 @@ static int jz4740_clock_init(void) if (!jz_clock_base) return -EBUSY; + jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100); + if (!jz_emc_base) + return -EBUSY; + spin_lock_init(&jz_clock_lock); jz_clk_ext.rate = jz4740_clock_bdata.ext_rate; diff --git a/arch/mips/jz4740/clock.h b/arch/mips/jz4740/clock.h index 5d07499..cc8d1db 100644 --- a/arch/mips/jz4740/clock.h +++ b/arch/mips/jz4740/clock.h @@ -17,6 +17,7 @@ #define __MIPS_JZ4740_CLOCK_H__ #include +#include struct jz4740_clock_board_data { unsigned long ext_rate; @@ -63,6 +64,9 @@ struct clk { int clk_is_enabled(struct clk *clk); +int clk_main_set_dividers(bool immediate, unsigned int cdiv, unsigned int hdiv, + unsigned int mdiv, unsigned int pdiv); + #ifdef CONFIG_DEBUG_FS void jz4740_clock_debugfs_init(void); void jz4740_clock_debugfs_add_clk(struct clk *clk); -- 1.7.5.4