base-files: generate network config with "device" options

Replace "ifname" with "device" as netifd has been recently patches to
used the later one. It's more clear and accurate.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 13 insertions, 13 deletions

diff --git a/package/base-files/files/bin/config_generate b/package/base-files/files/bin/config_generate
index be688a4ba3..d895090309 100755
--- a/package/base-files/files/bin/config_generate
+++ b/package/base-files/files/bin/config_generate
@@ -40,7 +40,7 @@ generate_static_network() {
 	uci -q batch <<-EOF
 		delete network.loopback
 		set network.loopback='interface'
-		set network.loopback.ifname='lo'
+		set network.loopback.device='lo'
 		set network.loopback.proto='static'
 		set network.loopback.ipaddr='127.0.0.1'
 		set network.loopback.netmask='255.0.0.0'
@@ -91,22 +91,22 @@ generate_static_network() {
 
 addr_offset=2
 generate_network() {
-	local ports ifname macaddr protocol type ipaddr netmask vlan
+	local ports device macaddr protocol type ipaddr netmask vlan
 	local bridge=$2
 
 	json_select network
 		json_select "$1"
+			json_get_vars device macaddr protocol ipaddr netmask vlan
 			json_get_values ports ports
-			json_get_vars ifname macaddr protocol ipaddr netmask vlan
 		json_select ..
 	json_select ..
 
-	[ -n "$ifname" -o -n "$ports" ] || return
+	[ -n "$device" -o -n "$ports" ] || return
 
 	# Force bridge for "lan" as it may have other devices (e.g. wireless)
 	# bridged
 	[ "$1" = "lan" -a -z "$ports" ] && {
-		ports="$ifname"
+		ports="$device"
 	}
 
 	[ -n "$ports" -a -z "$bridge" ] && {
@@ -117,19 +117,19 @@ generate_network() {
 			set network.@device[-1].macaddr='$macaddr'
 		EOF
 		for port in $ports; do uci add_list network.@device[-1].ports="$port"; done
-		ifname=br-$1
+		device=br-$1
 		type=
 		macaddr=""
 	}
 
 	[ -n "$bridge" ] && {
-		[ -z "$ports" ] && ports="$ifname"
+		[ -z "$ports" ] && ports="$device"
 		if [ -z "$vlan" ]; then
 			bridge_vlan_id=$((bridge_vlan_id + 1))
 			vlan=$bridge_vlan_id
 		fi
 		generate_bridge_vlan $1 $bridge "$ports" $vlan
-		ifname=$bridge.$vlan
+		device=$bridge.$vlan
 		type=""
 	}
 
@@ -137,12 +137,12 @@ generate_network() {
 		delete network.$1
 		set network.$1='interface'
 		set network.$1.type='$type'
-		set network.$1.ifname='$ifname'
+		set network.$1.device='$device'
 		set network.$1.proto='none'
 	EOF
 
 	if [ -n "$macaddr" ]; then
-		for name in $ifname; do
+		for name in $device; do
 			uci -q batch <<-EOF
 				delete network.$1_${name/./_}_dev
 				set network.$1_${name/./_}_dev='device'
@@ -172,14 +172,14 @@ generate_network() {
 
 		dhcp)
 			# fixup IPv6 slave interface if parent is a bridge
-			[ "$type" = "bridge" ] && ifname="br-$1"
+			[ "$type" = "bridge" ] && device="br-$1"
 
 			uci set network.$1.proto='dhcp'
 			[ -e /proc/sys/net/ipv6 ] && {
 				uci -q batch <<-EOF
 					delete network.${1}6
 					set network.${1}6='interface'
-					set network.${1}6.ifname='$ifname'
+					set network.${1}6.device='$device'
 					set network.${1}6.proto='dhcpv6'
 				EOF
 			}
@@ -196,7 +196,7 @@ generate_network() {
 					set network.$1.ipv6='1'
 					delete network.${1}6
 					set network.${1}6='interface'
-					set network.${1}6.ifname='@${1}'
+					set network.${1}6.device='@${1}'
 					set network.${1}6.proto='dhcpv6'
 				EOF
 			}