aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel/mac80211/patches
diff options
context:
space:
mode:
authorDaniel Golle <daniel@makrotopia.org>2022-07-28 13:40:12 +0200
committerDaniel Golle <daniel@makrotopia.org>2022-09-19 02:48:26 +0100
commit7c459ac1d5a9a5c507afd7a3205dccfad20883d1 (patch)
tree24dda31482c091b5583c1d414433b2c2b4407ea4 /package/kernel/mac80211/patches
parentd004110ef7b6a656b59ea7a5ca4a3deb4fc7ef99 (diff)
downloadupstream-7c459ac1d5a9a5c507afd7a3205dccfad20883d1.tar.gz
upstream-7c459ac1d5a9a5c507afd7a3205dccfad20883d1.tar.bz2
upstream-7c459ac1d5a9a5c507afd7a3205dccfad20883d1.zip
mac80211: rt2x00: experimental improvements for MT7620 wifi
Serge Vasilugin reports: To improve mt7620 built-in wifi performance some changes: 1. Correct BW20/BW40 switching (see comments with mark (1)) 2. Correct TX_SW_CFG1 MAC reg from v3 of vendor driver see https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 3. Set bbp66 for all chains. 4. US_CYC_CNT init based on Programming guide, default value was 33 (pci), set chipset bus clock with fallback to cpu clock/3. 5. Don't overwrite default values for mt7620. 6. Correct some typos. 7. Add support for external LNA: a) RF and BBP regs never be corrected for this mode b) eLNA is driven the same way as ePA with mt7620's pin PA but vendor driver explicitly pin PA to gpio mode (for forrect calibration?) so I'm not sure that request for pa_pin in dts-file will be enough First 5 changes (really 2) improve performance for boards w/o eLNA/ePA. Changes 7 add support for eLNA Configuration w/o eLAN/ePA and with eLNA show results tx/rx (from router point of view) for each stream: 35-40/30-35 Mbps for HT20 65-70/60-65 Mbps for HT40 Yes. Max results for 2T2R client is 140-145/135-140 with peaks 160/150, It correspond to mediatek driver results. Boards with ePA untested. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [directly include v3 of the patchset submitted upstream] (cherry picked from commit 31a6605de04218e1c04bd5c2436c24d7d1c07506) (cherry picked from commit e785ca05e9f0502894772f5df92192b816ba5d7c) (cherry picked from commit 412fcf3d4400f84551f3ead0514834c62d94a251)
Diffstat (limited to 'package/kernel/mac80211/patches')
-rw-r--r--package/kernel/mac80211/patches/rt2x00/001-rt2x00-define-RF5592-in-init_eeprom-routine.patch52
-rw-r--r--package/kernel/mac80211/patches/rt2x00/002-rt2x00-add-throughput-LED-trigger.patch76
-rw-r--r--package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch51
-rw-r--r--package/kernel/mac80211/patches/rt2x00/003-rt2x00-add-support-for-external-PA-on-MT7620.patch (renamed from package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch)72
-rw-r--r--package/kernel/mac80211/patches/rt2x00/004-rt2x00-move-up-and-reuse-busy-wait-functions.patch178
-rw-r--r--package/kernel/mac80211/patches/rt2x00/005-rt2x00-add-RF-self-TXDC-calibration-for-MT7620.patch (renamed from package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-RF-self-TXDC-calibration.patch)59
-rw-r--r--package/kernel/mac80211/patches/rt2x00/006-rt2x00-add-r-calibration-for-MT7620.patch (renamed from package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch)91
-rw-r--r--package/kernel/mac80211/patches/rt2x00/007-rt2x00-add-RXDCOC-calibration-for-MT7620.patch (renamed from package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-RXDCOC-calibration.patch)60
-rw-r--r--package/kernel/mac80211/patches/rt2x00/008-rt2x00-add-RXIQ-calibration-for-MT7620.patch (renamed from package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-RXIQ-calibration.patch)282
-rw-r--r--package/kernel/mac80211/patches/rt2x00/009-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch52
-rw-r--r--package/kernel/mac80211/patches/rt2x00/010-rt2x00-add-TX-LOFT-calibration-for-MT7620.patch (renamed from package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch)272
-rw-r--r--package/kernel/mac80211/patches/rt2x00/011-rt2x00-move-helper-functions-up-in-file.patch94
-rw-r--r--package/kernel/mac80211/patches/rt2x00/012-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch56
-rw-r--r--package/kernel/mac80211/patches/rt2x00/013-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT7620.patch52
-rw-r--r--package/kernel/mac80211/patches/rt2x00/014-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch50
-rw-r--r--package/kernel/mac80211/patches/rt2x00/015-rt2x00-set-SoC-wmac-clock-register.patch70
-rw-r--r--package/kernel/mac80211/patches/rt2x00/016-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch79
-rw-r--r--package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch8
-rw-r--r--package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch2
-rw-r--r--package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch2
-rw-r--r--package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch47
-rw-r--r--package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch161
-rw-r--r--package/kernel/mac80211/patches/rt2x00/995-rt2x00-mt7620-introduce-accessors-for-CHIP_VER-register.patch (renamed from package/kernel/mac80211/patches/rt2x00/990-rt2x00-mt7620-introduce-accessors-for-CHIP_VER-register.patch)0
-rw-r--r--package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch (renamed from package/kernel/mac80211/patches/rt2x00/991-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch)28
24 files changed, 1411 insertions, 483 deletions
diff --git a/package/kernel/mac80211/patches/rt2x00/001-rt2x00-define-RF5592-in-init_eeprom-routine.patch b/package/kernel/mac80211/patches/rt2x00/001-rt2x00-define-RF5592-in-init_eeprom-routine.patch
new file mode 100644
index 0000000000..351e24a4d5
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/001-rt2x00-define-RF5592-in-init_eeprom-routine.patch
@@ -0,0 +1,52 @@
+From patchwork Sat Sep 17 20:26:27 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 8bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979242
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:26:27 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 01/16] rt2x00: define RF5592 in init_eeprom routine
+Message-ID:
+ <d7eccb2c7b8ec4cd360fa2007796abffc35abb0d.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+From: Tomislav Požega <pozega.tomislav@gmail.com>
+
+Fix incorrect RF value encoded in EEPROM on devices with Ralink Rt5592
+PCIe radio (a single chip 2T2R 802.11abgn solution).
+
+Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -9435,6 +9435,8 @@ static int rt2800_init_eeprom(struct rt2
+ rf = RF3853;
+ else if (rt2x00_rt(rt2x00dev, RT5350))
+ rf = RF5350;
++ else if (rt2x00_rt(rt2x00dev, RT5592))
++ rf = RF5592;
+ else
+ rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
+
diff --git a/package/kernel/mac80211/patches/rt2x00/002-rt2x00-add-throughput-LED-trigger.patch b/package/kernel/mac80211/patches/rt2x00/002-rt2x00-add-throughput-LED-trigger.patch
new file mode 100644
index 0000000000..02d1f7a2e5
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/002-rt2x00-add-throughput-LED-trigger.patch
@@ -0,0 +1,76 @@
+From patchwork Sat Sep 17 20:26:40 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979243
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:26:40 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 02/16] rt2x00: add throughput LED trigger
+Message-ID:
+ <73f5ba4134e621462a26186449400cf0c1ac1730.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+From: David Bauer <mail@david-bauer.net>
+
+This adds a (currently missing) throughput LED trigger for the rt2x00
+driver. Previously, LED triggers had to be assigned to the netdev, which
+was limited to a single VAP.
+
+Tested-by: Christoph Krapp <achterin@googlemail.com>
+Signed-off-by: David Bauer <mail@david-bauer.net>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -1093,6 +1093,19 @@ static void rt2x00lib_remove_hw(struct r
+ kfree(rt2x00dev->spec.channels_info);
+ }
+
++static const struct ieee80211_tpt_blink rt2x00_tpt_blink[] = {
++ { .throughput = 0 * 1024, .blink_time = 334 },
++ { .throughput = 1 * 1024, .blink_time = 260 },
++ { .throughput = 2 * 1024, .blink_time = 220 },
++ { .throughput = 5 * 1024, .blink_time = 190 },
++ { .throughput = 10 * 1024, .blink_time = 170 },
++ { .throughput = 25 * 1024, .blink_time = 150 },
++ { .throughput = 54 * 1024, .blink_time = 130 },
++ { .throughput = 120 * 1024, .blink_time = 110 },
++ { .throughput = 265 * 1024, .blink_time = 80 },
++ { .throughput = 586 * 1024, .blink_time = 50 },
++};
++
+ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
+ {
+ struct hw_mode_spec *spec = &rt2x00dev->spec;
+@@ -1174,6 +1187,11 @@ static int rt2x00lib_probe_hw(struct rt2
+
+ #undef RT2X00_TASKLET_INIT
+
++ ieee80211_create_tpt_led_trigger(rt2x00dev->hw,
++ IEEE80211_TPT_LEDTRIG_FL_RADIO,
++ rt2x00_tpt_blink,
++ ARRAY_SIZE(rt2x00_tpt_blink));
++
+ /*
+ * Register HW.
+ */
diff --git a/package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch b/package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch
deleted file mode 100644
index 96eeb37dc6..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From patchwork Thu Dec 27 14:05:26 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: Tom Psyborg <pozega.tomislav@gmail.com>
-X-Patchwork-Id: 10743707
-X-Patchwork-Delegate: kvalo@adurom.com
-From: =?utf-8?q?Tomislav_Po=C5=BEega?= <pozega.tomislav@gmail.com>
-To: linux-wireless@vger.kernel.org
-Cc: kvalo@codeaurora.org, hauke@hauke-m.de, nbd@nbd.name,
- john@phrozen.org, sgruszka@redhat.com, daniel@makrotopia.org
-Subject: [PATCH 2/2] rt2x00: define RF5592 in init_eeprom routine
-Date: Thu, 27 Dec 2018 15:05:26 +0100
-Message-Id: <1545919526-4074-2-git-send-email-pozega.tomislav@gmail.com>
-X-Mailer: git-send-email 1.7.0.4
-In-Reply-To: <1545919526-4074-1-git-send-email-pozega.tomislav@gmail.com>
-References: <1545919526-4074-1-git-send-email-pozega.tomislav@gmail.com>
-MIME-Version: 1.0
-Sender: linux-wireless-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <linux-wireless.vger.kernel.org>
-X-Mailing-List: linux-wireless@vger.kernel.org
-X-Virus-Scanned: ClamAV using ClamSMTP
-
-This patch fixes following crash on Linksys EA2750 during 5GHz wifi
-init:
-
-[ 7.955153] rt2800pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
-[ 7.962259] rt2800pci 0000:01:00.0: loaded eeprom from mtd device "Factory"
-[ 7.969435] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
-[ 7.977348] ieee80211 phy0: rt2800_init_eeprom: Error - Invalid RF chipset 0x0000 detected
-[ 7.985793] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device
-[ 7.993569] CPU 0 Unable to handle kernel paging request at virtual address 00000024, epc == 800c8f54, ra == 80249ff8
-[ 8.004408] Oops[#1]:
-
-Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9435,6 +9435,8 @@ static int rt2800_init_eeprom(struct rt2
- rf = RF3853;
- else if (rt2x00_rt(rt2x00dev, RT5350))
- rf = RF5350;
-+ else if (rt2x00_rt(rt2x00dev, RT5592))
-+ rf = RF5592;
- else
- rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
-
diff --git a/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/003-rt2x00-add-support-for-external-PA-on-MT7620.patch
index 8814c02532..216f583063 100644
--- a/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch
+++ b/package/kernel/mac80211/patches/rt2x00/003-rt2x00-add-support-for-external-PA-on-MT7620.patch
@@ -1,22 +1,42 @@
-From 9782a7f7488443568fa4d6088b73c9aff7eb8510 Mon Sep 17 00:00:00 2001
+From patchwork Sat Sep 17 20:26:55 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 8bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979244
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:26:55 +0100
From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 19 Apr 2017 16:14:53 +0200
-Subject: [PATCH] rt2x00: add support for external PA on MT7620
-To: Stanislaw Gruszka <sgruszka@redhat.com>
-Cc: Helmut Schaa <helmut.schaa@googlemail.com>,
- linux-wireless@vger.kernel.org,
- Kalle Valo <kvalo@codeaurora.org>
-Content-Type: text/plain; charset="UTF-8"
-Content-Transfer-Encoding: quoted-printable
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 03/16] rt2x00: add support for external PA on MT7620
+Message-ID:
+ <af2c68ff831816a86fc39b0c10911c129a1f03dc.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
-[pozega.tomislav@gmail.com: use chanreg and dccal helpers.]
+Implement support for external PA connected to MT7620A.
+Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+[pozega.tomislav@gmail.com: use chanreg and dccal helpers.]
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
- drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 +
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 70 +++++++++++++++++++++++++-
- 2 files changed, 70 insertions(+), 1 deletion(-)
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 +
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 52 ++++++++++++++++++-
+ 2 files changed, 52 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -24,21 +44,19 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f)
#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0)
#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600)
-+#define EEPROM_NIC_CONF2_EXTERNAL_PA FIELD16(0xc000)
++#define EEPROM_NIC_CONF2_EXTERNAL_PA FIELD16(0x8000)
/*
* EEPROM LNA
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4369,6 +4369,45 @@ static void rt2800_config_channel(struct
+@@ -4368,6 +4368,43 @@ static void rt2800_config_channel(struct
rt2800_iq_calibrate(rt2x00dev, rf->channel);
}
+ if (rt2x00_rt(rt2x00dev, RT6352)) {
+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0,
+ &rt2x00dev->cap_flags)) {
-+ rt2x00_warn(rt2x00dev, "Using incomplete support for " \
-+ "external PA\n");
+ reg = rt2800_register_read(rt2x00dev, RF_CONTROL3);
+ reg |= 0x00000101;
+ rt2800_register_write(rt2x00dev, RF_CONTROL3, reg);
@@ -76,7 +94,7 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
bbp = rt2800_bbp_read(rt2x00dev, 4);
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
rt2800_bbp_write(rt2x00dev, 4, bbp);
-@@ -9578,7 +9617,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9566,7 +9603,8 @@ static int rt2800_init_eeprom(struct rt2
*/
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
@@ -86,19 +104,19 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
if (rt2x00_get_field16(eeprom,
EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352))
__set_bit(CAPABILITY_EXTERNAL_PA_TX0,
-@@ -9589,6 +9629,18 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9577,6 +9615,18 @@ static int rt2800_init_eeprom(struct rt2
&rt2x00dev->cap_flags);
}
+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2);
+
+ if (rt2x00_rt(rt2x00dev, RT6352) && eeprom != 0 && eeprom != 0xffff) {
-+ if (rt2x00_get_field16(eeprom,
-+ EEPROM_NIC_CONF2_EXTERNAL_PA)) {
-+ __set_bit(CAPABILITY_EXTERNAL_PA_TX0,
-+ &rt2x00dev->cap_flags);
-+ __set_bit(CAPABILITY_EXTERNAL_PA_TX1,
-+ &rt2x00dev->cap_flags);
++ if (!rt2x00_get_field16(eeprom,
++ EEPROM_NIC_CONF2_EXTERNAL_PA)) {
++ __clear_bit(CAPABILITY_EXTERNAL_PA_TX0,
++ &rt2x00dev->cap_flags);
++ __clear_bit(CAPABILITY_EXTERNAL_PA_TX1,
++ &rt2x00dev->cap_flags);
+ }
+ }
+
diff --git a/package/kernel/mac80211/patches/rt2x00/004-rt2x00-move-up-and-reuse-busy-wait-functions.patch b/package/kernel/mac80211/patches/rt2x00/004-rt2x00-move-up-and-reuse-busy-wait-functions.patch
new file mode 100644
index 0000000000..da453074a1
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/004-rt2x00-move-up-and-reuse-busy-wait-functions.patch
@@ -0,0 +1,178 @@
+From patchwork Sat Sep 17 20:27:10 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979245
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:27:10 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 04/16] rt2x00: move up and reuse busy wait functions
+Message-ID:
+ <3fdb9dc15e76a9f9c1948b4a3a1308a7a5677bb8.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+Move bbp_ready and rf_ready busy wait functions up in the code so they
+can more easily be used. Allow specifying register mask in rf_ready
+function which is useful for calibration routines which will be added
+in follow-up commits.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 99 +++++++++----------
+ 1 file changed, 46 insertions(+), 53 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -2143,6 +2143,48 @@ void rt2800_config_erp(struct rt2x00_dev
+ }
+ EXPORT_SYMBOL_GPL(rt2800_config_erp);
+
++static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev,
++ const struct rt2x00_field32 mask)
++{
++ unsigned int i;
++ u32 reg;
++
++ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
++ reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
++ if (!rt2x00_get_field32(reg, mask))
++ return 0;
++
++ udelay(REGISTER_BUSY_DELAY);
++ }
++
++ rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n");
++ return -EACCES;
++}
++
++static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
++{
++ unsigned int i;
++ u8 value;
++
++ /*
++ * BBP was enabled after firmware was loaded,
++ * but we need to reactivate it now.
++ */
++ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
++ rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
++ msleep(1);
++
++ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
++ value = rt2800_bbp_read(rt2x00dev, 0);
++ if ((value != 0xff) && (value != 0x00))
++ return 0;
++ udelay(REGISTER_BUSY_DELAY);
++ }
++
++ rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n");
++ return -EACCES;
++}
++
+ static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev)
+ {
+ u32 reg;
+@@ -3799,10 +3841,9 @@ static void rt2800_config_alc(struct rt2
+ struct ieee80211_channel *chan,
+ int power_level) {
+ u16 eeprom, target_power, max_power;
+- u32 mac_sys_ctrl, mac_status;
++ u32 mac_sys_ctrl;
+ u32 reg;
+ u8 bbp;
+- int i;
+
+ /* hardware unit is 0.5dBm, limited to 23.5dBm */
+ power_level *= 2;
+@@ -3838,16 +3879,8 @@ static void rt2800_config_alc(struct rt2
+ /* Disable Tx/Rx */
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
+ /* Check MAC Tx/Rx idle */
+- for (i = 0; i < 10000; i++) {
+- mac_status = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+- if (mac_status & 0x3)
+- usleep_range(50, 200);
+- else
+- break;
+- }
+-
+- if (i == 10000)
+- rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n");
++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY)))
++ rt2x00_warn(rt2x00dev, "RF busy while configuring ALC\n");
+
+ if (chan->center_freq > 2457) {
+ bbp = rt2800_bbp_read(rt2x00dev, 30);
+@@ -6249,46 +6282,6 @@ static int rt2800_init_registers(struct
+ return 0;
+ }
+
+-static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
+-{
+- unsigned int i;
+- u32 reg;
+-
+- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+- reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+- if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
+- return 0;
+-
+- udelay(REGISTER_BUSY_DELAY);
+- }
+-
+- rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n");
+- return -EACCES;
+-}
+-
+-static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
+-{
+- unsigned int i;
+- u8 value;
+-
+- /*
+- * BBP was enabled after firmware was loaded,
+- * but we need to reactivate it now.
+- */
+- rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+- rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+- msleep(1);
+-
+- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+- value = rt2800_bbp_read(rt2x00dev, 0);
+- if ((value != 0xff) && (value != 0x00))
+- return 0;
+- udelay(REGISTER_BUSY_DELAY);
+- }
+-
+- rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n");
+- return -EACCES;
+-}
+
+ static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev)
+ {
+@@ -9110,7 +9103,7 @@ int rt2800_enable_radio(struct rt2x00_de
+ /*
+ * Wait BBP/RF to wake up.
+ */
+- if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev)))
++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY)))
+ return -EIO;
+
+ /*
diff --git a/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-RF-self-TXDC-calibration.patch b/package/kernel/mac80211/patches/rt2x00/005-rt2x00-add-RF-self-TXDC-calibration-for-MT7620.patch
index b74bea2020..4e98d6a375 100644
--- a/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-RF-self-TXDC-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/005-rt2x00-add-RF-self-TXDC-calibration-for-MT7620.patch
@@ -1,20 +1,48 @@
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav@gmail.com>
-Date: Mon, 8 Jan 2018 13:42:27 +0100
-Subject: [PATCH] rt2x00: add RF self TXDC calibration
+From patchwork Sat Sep 17 20:27:26 2022
+Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979246
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:27:26 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 05/16] rt2x00: add RF self TXDC calibration for MT7620
+Message-ID:
+ <dbb6e5a0c12d6101477bd09e83253091d21512c9.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+From: Tomislav Požega <pozega.tomislav@gmail.com>
Add TX self calibration based on mtk driver.
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 51 +++++++++++++++++++
- 1 file changed, 51 insertions(+)
+v2: use ++i instead of i = i + 1 in loops
+
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 48 +++++++++++++++++++
+ 1 file changed, 48 insertions(+)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8438,6 +8438,56 @@ static void rt2800_init_rfcsr_5592(struc
+@@ -8428,6 +8428,53 @@ static void rt2800_init_rfcsr_5592(struc
rt2800_led_open_drain_enable(rt2x00dev);
}
@@ -24,7 +52,6 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ u32 mac0518, mac051c, mac0528, mac052c;
+ u8 i;
+
-+ rt2x00_info(rt2x00dev, "RF Tx self calibration start\n");
+ mac0518 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
+ mac051c = rt2800_register_read(rt2x00dev, RF_BYPASS0);
+ mac0528 = rt2800_register_read(rt2x00dev, RF_CONTROL2);
@@ -41,19 +68,19 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rfb7r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1);
+
+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, 0x4);
-+ for (i = 0; i < 100; i = i + 1) {
-+ udelay(50);
++ for (i = 0; i < 100; ++i) {
++ usleep_range(50, 100);
+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
-+ if((rfvalue & 0x04) != 0x4)
++ if ((rfvalue & 0x04) != 0x4)
+ break;
+ }
+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rfb5r1_org);
+
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, 0x4);
-+ for (i = 0; i < 100; i = i + 1) {
-+ udelay(50);
++ for (i = 0; i < 100; ++i) {
++ usleep_range(50, 100);
+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1);
-+ if((rfvalue & 0x04) != 0x4)
++ if ((rfvalue & 0x04) != 0x4)
+ break;
+ }
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, rfb7r1_org);
@@ -64,14 +91,12 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_register_write(rt2x00dev, RF_BYPASS0, mac051c);
+ rt2800_register_write(rt2x00dev, RF_CONTROL2, mac0528);
+ rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c);
-+
-+ rt2x00_info(rt2x00dev, "RF Tx self calibration end\n");
+}
+
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9045,6 +9095,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9035,6 +9082,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
diff --git a/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch b/package/kernel/mac80211/patches/rt2x00/006-rt2x00-add-r-calibration-for-MT7620.patch
index 04ea802117..7c69970166 100644
--- a/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/006-rt2x00-add-r-calibration-for-MT7620.patch
@@ -1,28 +1,68 @@
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav@gmail.com>
-Date: Mon, 8 Jan 2018 13:42:58 +0100
-Subject: [PATCH] rt2x00: add r calibration
+From patchwork Sat Sep 17 20:27:41 2022
+Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979247
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:27:41 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 06/16] rt2x00: add r calibration for MT7620
+Message-ID:
+ <e0c34f233089bec4eb73826bc4f512166ee25934.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+From: Tomislav Požega <pozega.tomislav@gmail.com>
Add r calibration code as found in mtk driver.
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 150 ++++++++++++++++++
- 1 file changed, 150 insertions(+)
+v2: use rt2800_wait_bbp_rf_ready()
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 2 +
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 133 ++++++++++++++++++
+ 2 files changed, 135 insertions(+)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
+@@ -1016,6 +1016,8 @@
+ */
+ #define MAC_STATUS_CFG 0x1200
+ #define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003)
++#define MAC_STATUS_CFG_BBP_RF_BUSY_TX FIELD32(0x00000001)
++#define MAC_STATUS_CFG_BBP_RF_BUSY_RX FIELD32(0x00000002)
+
+ /*
+ * PWR_PIN_CFG:
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8488,6 +8488,155 @@ static void rt2800_rf_self_txdc_cal(stru
- rt2x00_info(rt2x00dev, "RF Tx self calibration end\n");
+@@ -8475,6 +8475,138 @@ static void rt2800_rf_self_txdc_cal(stru
+ rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c);
}
+static int rt2800_calcrcalibrationcode(struct rt2x00_dev *rt2x00dev, int d1, int d2)
+{
-+ int calcode;
-+ calcode = ((d2 - d1) * 1000) / 43;
-+ if ((calcode%10) >= 5)
++ int calcode = ((d2 - d1) * 1000) / 43;
++
++ if ((calcode % 10) >= 5)
+ calcode += 10;
+ calcode = (calcode / 10);
+
@@ -42,8 +82,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ char d1 = 0, d2 = 0;
+ u8 rfvalue;
+ u32 MAC_RF_BYPASS0, MAC_RF_CONTROL0, MAC_PWR_PIN_CFG;
-+ u32 maccfg, macstatus;
-+ int i;
++ u32 maccfg;
+
+ saverfb0r1 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1);
+ saverfb0r34 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 34);
@@ -67,30 +106,14 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ maccfg &= (~0x04);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg);
+
-+ for (i = 0; i < 10000; i++) {
-+ macstatus = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
-+ if (macstatus & 0x1)
-+ udelay(50);
-+ else
-+ break;
-+ }
-+
-+ if (i == 10000)
++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX)))
+ rt2x00_warn(rt2x00dev, "Wait MAC Tx Status to MAX !!!\n");
+
+ maccfg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
+ maccfg &= (~0x04);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg);
+
-+ for (i = 0; i < 10000; i++) {
-+ macstatus = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
-+ if (macstatus & 0x2)
-+ udelay(50);
-+ else
-+ break;
-+ }
-+
-+ if (i == 10000)
++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX)))
+ rt2x00_warn(rt2x00dev, "Wait MAC Rx Status to MAX !!!\n");
+
+ rfvalue = (MAC_RF_BYPASS0 | 0x3004);
@@ -112,7 +135,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+
+ rt2800_bbp_write(rt2x00dev, 47, 0x04);
+ rt2800_bbp_write(rt2x00dev, 22, 0x80);
-+ udelay(100);
++ usleep_range(100, 200);
+ bytevalue = rt2800_bbp_read(rt2x00dev, 49);
+ if (bytevalue > 128)
+ d1 = bytevalue - 256;
@@ -122,7 +145,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x01);
+
+ rt2800_bbp_write(rt2x00dev, 22, 0x80);
-+ udelay(100);
++ usleep_range(100, 200);
+ bytevalue = rt2800_bbp_read(rt2x00dev, 49);
+ if (bytevalue > 128)
+ d2 = bytevalue - 256;
@@ -170,7 +193,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9095,6 +9244,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9082,6 +9214,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
diff --git a/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-RXDCOC-calibration.patch b/package/kernel/mac80211/patches/rt2x00/007-rt2x00-add-RXDCOC-calibration-for-MT7620.patch
index 821af87ec1..8da41e875a 100644
--- a/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-RXDCOC-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/007-rt2x00-add-RXDCOC-calibration-for-MT7620.patch
@@ -1,27 +1,54 @@
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav@gmail.com>
-Date: Mon, 8 Jan 2018 13:43:37 +0100
-Subject: [PATCH] rt2x00: add RXDCOC calibration
+From patchwork Sat Sep 17 20:27:56 2022
+Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979248
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:27:56 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 07/16] rt2x00: add RXDCOC calibration for MT7620
+Message-ID:
+ <850b30f652e88de30d79e968af4eb47aa5bc2511.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+From: Tomislav Požega <pozega.tomislav@gmail.com>
Add RXDCOC calibration code from mtk driver.
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+[fixed typo reported by Serge Vasilugin <vasilugin@yandex.ru>]
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 65 +++++++++++++++++++
- 1 file changed, 65 insertions(+)
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 60 +++++++++++++++++++
+ 1 file changed, 60 insertions(+)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8637,6 +8637,70 @@ static void rt2800_r_calibration(struct
+@@ -8607,6 +8607,65 @@ static void rt2800_r_calibration(struct
rt2800_register_write(rt2x00dev, PWR_PIN_CFG, MAC_PWR_PIN_CFG);
}
+static void rt2800_rxdcoc_calibration(struct rt2x00_dev *rt2x00dev)
+{
+ u8 bbpreg = 0;
-+ u32 macvalue = 0, macvalue1 = 0;
++ u32 macvalue = 0;
+ u8 saverfb0r2, saverfb5r4, saverfb7r4, rfvalue;
+ int i;
+
@@ -38,15 +65,10 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x8);
+
-+ for (i = 0; i < 10000; i++) {
-+ macvalue1 = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
-+ if (macvalue1 & 0x1)
-+ udelay(50);
-+ else
-+ break;
-+ }
++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX)))
++ rt2x00_warn(rt2x00dev, "RF TX busy in RX RXDCOC calibration\n");
+
-+ saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 0);
++ saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4);
+ saverfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4);
+ saverfb5r4 = saverfb5r4 & (~0x40);
+ saverfb7r4 = saverfb7r4 & (~0x40);
@@ -63,9 +85,9 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+
+ for (i = 0; i < 10000; i++) {
+ bbpreg = rt2800_bbp_read(rt2x00dev, 159);
-+ if ((bbpreg & 0x40)==0)
++ if ((bbpreg & 0x40) == 0)
+ break;
-+ udelay(50);
++ usleep_range(50, 100);
+ }
+
+ bbpreg = rt2800_bbp_read(rt2x00dev, 159);
@@ -85,7 +107,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9246,6 +9310,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9216,6 +9275,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_r_calibration(rt2x00dev);
rt2800_rf_self_txdc_cal(rt2x00dev);
diff --git a/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-RXIQ-calibration.patch b/package/kernel/mac80211/patches/rt2x00/008-rt2x00-add-RXIQ-calibration-for-MT7620.patch
index 1c07cc7520..dc516da43a 100644
--- a/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-RXIQ-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/008-rt2x00-add-RXIQ-calibration-for-MT7620.patch
@@ -1,32 +1,62 @@
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav@gmail.com>
-Date: Mon, 8 Jan 2018 13:43:56 +0100
-Subject: [PATCH] rt2x00: add RXIQ calibration
+From patchwork Sat Sep 17 20:28:10 2022
+Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979249
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:28:10 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 08/16] rt2x00: add RXIQ calibration for MT7620
+Message-ID:
+ <033a39a697d51f6df258acea4c33608e0944fe4c.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+From: Tomislav Požega <pozega.tomislav@gmail.com>
Add RXIQ calibration found in mtk driver. With old openwrt builds this
gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout).
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 379 ++++++++++++++++++
- 1 file changed, 379 insertions(+)
+v2: use rt2800_wait_bbp_rf_ready(), fix indentation
+
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 375 ++++++++++++++++++
+ 1 file changed, 375 insertions(+)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8701,6 +8701,384 @@ static void rt2800_rxdcoc_calibration(st
+@@ -8666,6 +8666,380 @@ static void rt2800_rxdcoc_calibration(st
rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, saverfb0r2);
}
-+static u32 rt2800_do_sqrt_accumulation(u32 si) {
++static u32 rt2800_do_sqrt_accumulation(u32 si)
++{
+ u32 root, root_pre, bit;
+ char i;
++
+ bit = 1 << 15;
+ root = 0;
+ for (i = 15; i >= 0; i = i - 1) {
+ root_pre = root + bit;
-+ if ((root_pre*root_pre) <= si)
++ if ((root_pre * root_pre) <= si)
+ root = root_pre;
+ bit = bit >> 1;
+ }
@@ -34,7 +64,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ return root;
+}
+
-+static void rt2800_rxiq_calibration(struct rt2x00_dev *rt2x00dev) {
++static void rt2800_rxiq_calibration(struct rt2x00_dev *rt2x00dev)
++{
+ u8 rfb0r1, rfb0r2, rfb0r42;
+ u8 rfb4r0, rfb4r19;
+ u8 rfb5r3, rfb5r4, rfb5r17, rfb5r18, rfb5r19, rfb5r20;
@@ -58,8 +89,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ u32 orig_RF_BYPASS1 = 0;
+ u32 orig_RF_CONTROL3 = 0;
+ u32 orig_RF_BYPASS3 = 0;
-+ u32 macstatus, bbpval1 = 0;
-+ u8 rf_vga_table[] = {0x20, 0x21, 0x22, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f};
++ u32 bbpval1 = 0;
++ static const u8 rf_vga_table[] = {0x20, 0x21, 0x22, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f};
+
+ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
+ orig_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
@@ -74,16 +105,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x0);
+
-+ for (i = 0; i < 10000; i++) {
-+ macstatus = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
-+ if (macstatus & 0x3)
-+ udelay(50);
-+ else
-+ break;
-+ }
-+
-+ if (i == 10000)
-+ rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n");
++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY)))
++ rt2x00_warn(rt2x00dev, "Timeout waiting for MAC status in RXIQ calibration\n");
+
+ bbpval = bbp4 & (~0x18);
+ bbpval = bbp4 | 0x00;
@@ -180,7 +203,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006);
+ udelay(1);
+
-+ bbpval = bbp1 & (~ 0x18);
++ bbpval = bbp1 & (~0x18);
+ bbpval = bbpval | 0x00;
+ rt2800_bbp_write(rt2x00dev, 1, bbpval);
+
@@ -199,132 +222,133 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002006);
+ udelay(1);
+
-+ bbpval = bbp1 & (~ 0x18);
++ bbpval = bbp1 & (~0x18);
+ bbpval = bbpval | 0x08;
+ rt2800_bbp_write(rt2x00dev, 1, bbpval);
+
+ rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x01);
+ }
-+ udelay(500);
++ usleep_range(500, 1500);
+
+ vga_idx = 0;
-+ while (vga_idx < 11) {
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rf_vga_table[vga_idx]);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rf_vga_table[vga_idx]);
-+
-+ rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x93);
-+
-+ for (i = 0; i < 10000; i++) {
-+ bbpval = rt2800_bbp_read(rt2x00dev, 159);
-+ if ((bbpval & 0xff) == 0x93)
-+ udelay(50);
-+ else
-+ break;
-+ }
-+
-+ if ((bbpval & 0xff) == 0x93) {
-+ rt2x00_warn(rt2x00dev, "Fatal Error: Calibration doesn't finish");
-+ goto restore_value;
-+ }
++ while (vga_idx < 11) {
++ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rf_vga_table[vga_idx]);
++ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rf_vga_table[vga_idx]);
+
-+ for (i = 0; i < 5; i++) {
-+ u32 bbptemp = 0;
-+ u8 value = 0;
-+ int result = 0;
-+
-+ rt2800_bbp_write(rt2x00dev, 158, 0x1e);
-+ rt2800_bbp_write(rt2x00dev, 159, i);
-+ rt2800_bbp_write(rt2x00dev, 158, 0x22);
-+ value = rt2800_bbp_read(rt2x00dev, 159);
-+ bbptemp = bbptemp + (value << 24);
-+ rt2800_bbp_write(rt2x00dev, 158, 0x21);
-+ value = rt2800_bbp_read(rt2x00dev, 159);
-+ bbptemp = bbptemp + (value << 16);
-+ rt2800_bbp_write(rt2x00dev, 158, 0x20);
-+ value = rt2800_bbp_read(rt2x00dev, 159);
-+ bbptemp = bbptemp + (value << 8);
-+ rt2800_bbp_write(rt2x00dev, 158, 0x1f);
-+ value = rt2800_bbp_read(rt2x00dev, 159);
-+ bbptemp = bbptemp + value;
-+
-+ if ((i < 2) && (bbptemp & 0x800000))
-+ result = (bbptemp & 0xffffff) - 0x1000000;
-+ else if (i == 4)
-+ result = bbptemp;
-+ else
-+ result = bbptemp;
-+
-+ if (i == 0)
-+ mi = result/4096;
-+ else if (i == 1)
-+ mq = result/4096;
-+ else if (i == 2)
-+ si = bbptemp/4096;
-+ else if (i == 3)
-+ sq = bbptemp/4096;
-+ else
-+ riq = result/4096;
-+ }
++ rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x93);
+
-+ bbpval1 = si - mi*mi;
-+ rt2x00_dbg(rt2x00dev, "RXIQ si=%d, sq=%d, riq=%d, bbpval %d, vga_idx %d", si, sq, riq, bbpval1, vga_idx);
-+
-+ if (bbpval1 >= (100*100))
++ for (i = 0; i < 10000; i++) {
++ bbpval = rt2800_bbp_read(rt2x00dev, 159);
++ if ((bbpval & 0xff) == 0x93)
++ usleep_range(50, 100);
++ else
+ break;
++ }
+
-+ if (bbpval1 <= 100)
-+ vga_idx = vga_idx + 9;
-+ else if (bbpval1 <= 158)
-+ vga_idx = vga_idx + 8;
-+ else if (bbpval1 <= 251)
-+ vga_idx = vga_idx + 7;
-+ else if (bbpval1 <= 398)
-+ vga_idx = vga_idx + 6;
-+ else if (bbpval1 <= 630)
-+ vga_idx = vga_idx + 5;
-+ else if (bbpval1 <= 1000)
-+ vga_idx = vga_idx + 4;
-+ else if (bbpval1 <= 1584)
-+ vga_idx = vga_idx + 3;
-+ else if (bbpval1 <= 2511)
-+ vga_idx = vga_idx + 2;
++ if ((bbpval & 0xff) == 0x93) {
++ rt2x00_warn(rt2x00dev, "Fatal Error: Calibration doesn't finish");
++ goto restore_value;
++ }
++ for (i = 0; i < 5; i++) {
++ u32 bbptemp = 0;
++ u8 value = 0;
++ int result = 0;
++
++ rt2800_bbp_write(rt2x00dev, 158, 0x1e);
++ rt2800_bbp_write(rt2x00dev, 159, i);
++ rt2800_bbp_write(rt2x00dev, 158, 0x22);
++ value = rt2800_bbp_read(rt2x00dev, 159);
++ bbptemp = bbptemp + (value << 24);
++ rt2800_bbp_write(rt2x00dev, 158, 0x21);
++ value = rt2800_bbp_read(rt2x00dev, 159);
++ bbptemp = bbptemp + (value << 16);
++ rt2800_bbp_write(rt2x00dev, 158, 0x20);
++ value = rt2800_bbp_read(rt2x00dev, 159);
++ bbptemp = bbptemp + (value << 8);
++ rt2800_bbp_write(rt2x00dev, 158, 0x1f);
++ value = rt2800_bbp_read(rt2x00dev, 159);
++ bbptemp = bbptemp + value;
++
++ if (i < 2 && (bbptemp & 0x800000))
++ result = (bbptemp & 0xffffff) - 0x1000000;
++ else if (i == 4)
++ result = bbptemp;
++ else
++ result = bbptemp;
++
++ if (i == 0)
++ mi = result / 4096;
++ else if (i == 1)
++ mq = result / 4096;
++ else if (i == 2)
++ si = bbptemp / 4096;
++ else if (i == 3)
++ sq = bbptemp / 4096;
+ else
-+ vga_idx = vga_idx + 1;
++ riq = result / 4096;
+ }
+
-+ sigma_i = rt2800_do_sqrt_accumulation(100*(si - mi*mi));
-+ sigma_q = rt2800_do_sqrt_accumulation(100*(sq - mq*mq));
-+ r_iq = 10*(riq-(mi*mq));
++ bbpval1 = si - mi * mi;
++ rt2x00_dbg(rt2x00dev,
++ "RXIQ si=%d, sq=%d, riq=%d, bbpval %d, vga_idx %d",
++ si, sq, riq, bbpval1, vga_idx);
++
++ if (bbpval1 >= (100 * 100))
++ break;
++
++ if (bbpval1 <= 100)
++ vga_idx = vga_idx + 9;
++ else if (bbpval1 <= 158)
++ vga_idx = vga_idx + 8;
++ else if (bbpval1 <= 251)
++ vga_idx = vga_idx + 7;
++ else if (bbpval1 <= 398)
++ vga_idx = vga_idx + 6;
++ else if (bbpval1 <= 630)
++ vga_idx = vga_idx + 5;
++ else if (bbpval1 <= 1000)
++ vga_idx = vga_idx + 4;
++ else if (bbpval1 <= 1584)
++ vga_idx = vga_idx + 3;
++ else if (bbpval1 <= 2511)
++ vga_idx = vga_idx + 2;
++ else
++ vga_idx = vga_idx + 1;
++ }
++
++ sigma_i = rt2800_do_sqrt_accumulation(100 * (si - mi * mi));
++ sigma_q = rt2800_do_sqrt_accumulation(100 * (sq - mq * mq));
++ r_iq = 10 * (riq - (mi * mq));
+
+ rt2x00_dbg(rt2x00dev, "Sigma_i=%d, Sigma_q=%d, R_iq=%d", sigma_i, sigma_q, r_iq);
+
-+ if (((sigma_i <= 1400 ) && (sigma_i >= 1000))
-+ && ((sigma_i - sigma_q) <= 112)
-+ && ((sigma_i - sigma_q) >= -112)
-+ && ((mi <= 32) && (mi >= -32))
-+ && ((mq <= 32) && (mq >= -32))) {
-+ r_iq = 10*(riq-(mi*mq));
-+ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n", sigma_i, sigma_q, r_iq);
-+
-+ g_rx = (1000 * sigma_q) / sigma_i;
-+ g_imb = ((-2) * 128 * (1000 - g_rx)) / (1000 + g_rx);
-+ ph_rx = (r_iq * 2292) / (sigma_i * sigma_q);
-+ rt2x00_info(rt2x00dev, "RXIQ G_imb=%d, Ph_rx=%d\n", g_imb, ph_rx);
-+
-+ if ((ph_rx > 20) || (ph_rx < -20)) {
-+ ph_rx = 0;
-+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
-+ }
++ if (sigma_i <= 1400 && sigma_i >= 1000 &&
++ (sigma_i - sigma_q) <= 112 &&
++ (sigma_i - sigma_q) >= -112 &&
++ mi <= 32 && mi >= -32 &&
++ mq <= 32 && mq >= -32) {
++ r_iq = 10 * (riq - (mi * mq));
++ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n",
++ sigma_i, sigma_q, r_iq);
++
++ g_rx = (1000 * sigma_q) / sigma_i;
++ g_imb = ((-2) * 128 * (1000 - g_rx)) / (1000 + g_rx);
++ ph_rx = (r_iq * 2292) / (sigma_i * sigma_q);
++
++ if (ph_rx > 20 || ph_rx < -20) {
++ ph_rx = 0;
++ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
++ }
+
-+ if ((g_imb > 12) || (g_imb < -12)) {
-+ g_imb = 0;
-+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
-+ }
++ if (g_imb > 12 || g_imb < -12) {
++ g_imb = 0;
++ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
+ }
-+ else {
++ } else {
+ g_imb = 0;
+ ph_rx = 0;
-+ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n", sigma_i, sigma_q, r_iq);
++ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n",
++ sigma_i, sigma_q, r_iq);
+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL");
+ }
+
@@ -400,7 +424,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9313,6 +9691,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9278,6 +9652,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rxdcoc_calibration(rt2x00dev);
rt2800_bw_filter_calibration(rt2x00dev, true);
rt2800_bw_filter_calibration(rt2x00dev, false);
diff --git a/package/kernel/mac80211/patches/rt2x00/009-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/009-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch
new file mode 100644
index 0000000000..6b27f6a705
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/009-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch
@@ -0,0 +1,52 @@
+From patchwork Sat Sep 17 20:28:29 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979250
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:28:29 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 09/16] rt2x00: don't run Rt5592 IQ calibration on MT7620
+Message-ID:
+ <31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+The function rt2800_iq_calibrate is intended for Rt5592 only.
+Don't call it for MT7620 which has it's own calibration functions.
+
+Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+v2: test for RT5592 instead of !RT6352
+
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -4398,7 +4398,8 @@ static void rt2800_config_channel(struct
+ reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain;
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
+
+- rt2800_iq_calibrate(rt2x00dev, rf->channel);
++ if (rt2x00_rt(rt2x00dev, RT5592))
++ rt2800_iq_calibrate(rt2x00dev, rf->channel);
+ }
+
+ if (rt2x00_rt(rt2x00dev, RT6352)) {
diff --git a/package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch b/package/kernel/mac80211/patches/rt2x00/010-rt2x00-add-TX-LOFT-calibration-for-MT7620.patch
index a816aaf52a..bb01ff1dca 100644
--- a/package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/010-rt2x00-add-TX-LOFT-calibration-for-MT7620.patch
@@ -1,25 +1,56 @@
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav@gmail.com>
-Date: Thu, 11 Jan 2018 19:53:49 +0100
-Subject: [PATCH] rt2x00: add TX LOFT calibration
+From patchwork Sat Sep 17 20:28:43 2022
+Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979251
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:28:43 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 10/16] rt2x00: add TX LOFT calibration for MT7620
+Message-ID:
+ <d9295a9138a1f552b648aacb84e1419d38f5c896.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+From: Tomislav Požega <pozega.tomislav@gmail.com>
Add TX LOFT calibration from mtk driver.
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 938 ++++++++++++++++++
+v2: use helper functions, make tables static const, remove useless
+ debug prints
+v3: don't export function not used anywhere else
+Reported-by: kernel test robot <lkp@intel.com>
+
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 902 ++++++++++++++++++
.../net/wireless/ralink/rt2x00/rt2800lib.h | 10 +
- 2 files changed, 948 insertions(+)
+ 2 files changed, 912 insertions(+)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9079,6 +9079,943 @@ restore_value:
+@@ -9041,6 +9041,907 @@ restore_value:
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl);
}
-+static void rt2800_rf_configstore(struct rt2x00_dev *rt2x00dev, rf_reg_pair rf_reg_record[][13], u8 chain)
++static void rt2800_rf_configstore(struct rt2x00_dev *rt2x00dev,
++ struct rf_reg_pair rf_reg_record[][13], u8 chain)
+{
+ u8 rfvalue = 0;
+
@@ -131,13 +162,11 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rf_reg_record[CHAIN_1][12].value = rfvalue;
+ } else {
+ rt2x00_warn(rt2x00dev, "Unknown chain = %u\n", chain);
-+ return;
+ }
-+
-+ return;
+}
+
-+static void rt2800_rf_configrecover(struct rt2x00_dev *rt2x00dev, rf_reg_pair rf_record[][13])
++static void rt2800_rf_configrecover(struct rt2x00_dev *rt2x00dev,
++ struct rf_reg_pair rf_record[][13])
+{
+ u8 chain_index = 0, record_index = 0;
+ u8 bank = 0, rf_register = 0, value = 0;
@@ -148,11 +177,10 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rf_register = rf_record[chain_index][record_index].reg;
+ value = rf_record[chain_index][record_index].value;
+ rt2800_rfcsr_write_bank(rt2x00dev, bank, rf_register, value);
-+ rt2x00_dbg(rt2x00dev, "bank: %d, rf_register: %d, value: %x\n", bank, rf_register, value);
++ rt2x00_dbg(rt2x00dev, "bank: %d, rf_register: %d, value: %x\n",
++ bank, rf_register, value);
+ }
+ }
-+
-+ return;
+}
+
+static void rt2800_setbbptonegenerator(struct rt2x00_dev *rt2x00dev)
@@ -170,15 +198,13 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_bbp_write(rt2x00dev, 159, 0x3F);
+
+ rt2800_bbp_write(rt2x00dev, 244, 0x40);
-+
-+ return;
+}
+
+static u32 rt2800_do_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx, u8 read_neg)
+{
+ u32 macvalue = 0;
+ int fftout_i = 0, fftout_q = 0;
-+ u32 ptmp=0, pint = 0;
++ u32 ptmp = 0, pint = 0;
+ u8 bbp = 0;
+ u8 tidxi;
+
@@ -188,7 +214,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ bbp = 0x9b;
+
+ while (bbp == 0x9b) {
-+ udelay(10);
++ usleep_range(10, 50);
+ bbp = rt2800_bbp_read(rt2x00dev, 159);
+ bbp = bbp & 0xff;
+ }
@@ -233,10 +259,11 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ return pint;
+}
+
-+static u32 rt2800_read_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx) {
++static u32 rt2800_read_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx)
++{
+ u32 macvalue = 0;
+ int fftout_i = 0, fftout_q = 0;
-+ u32 ptmp=0, pint = 0;
++ u32 ptmp = 0, pint = 0;
+
+ rt2800_bbp_write(rt2x00dev, 158, 0xBA);
+ rt2800_bbp_write(rt2x00dev, 159, tidx);
@@ -252,7 +279,6 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ ptmp = (fftout_i * fftout_i);
+ ptmp = ptmp + (fftout_q * fftout_q);
+ pint = ptmp;
-+ rt2x00_info(rt2x00dev, "I = %d, Q = %d, power = %x\n", fftout_i, fftout_q, pint);
+
+ return pint;
+}
@@ -266,18 +292,17 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_bbp_write(rt2x00dev, 159, bbp);
+
+ if (ch_idx == 0)
-+ bbp = (iorq == 0) ? 0xb1: 0xb2;
++ bbp = (iorq == 0) ? 0xb1 : 0xb2;
+ else
-+ bbp = (iorq == 0) ? 0xb8: 0xb9;
++ bbp = (iorq == 0) ? 0xb8 : 0xb9;
+
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ bbp = dc;
+ rt2800_bbp_write(rt2x00dev, 159, bbp);
-+
-+ return;
+}
+
-+static void rt2800_loft_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 alc_idx, u8 dc_result[][RF_ALC_NUM][2])
++static void rt2800_loft_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx,
++ u8 alc_idx, u8 dc_result[][RF_ALC_NUM][2])
+{
+ u32 p0 = 0, p1 = 0, pf = 0;
+ char idx0 = 0, idx1 = 0;
@@ -291,8 +316,6 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+
+ for (bidx = 5; bidx >= 0; bidx--) {
+ for (iorq = 0; iorq <= 1; iorq++) {
-+ rt2x00_dbg(rt2x00dev, "\n========================================================\n");
-+
+ if (idxf[iorq] == 0x20) {
+ idx0 = 0x20;
+ p0 = pf;
@@ -303,16 +326,17 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0);
+ }
+
-+ idx1 = idxf[iorq] + ((bidx == 5) ? 0 : ibit);
++ idx1 = idxf[iorq] + (bidx == 5 ? 0 : ibit);
+ idx1 = idx1 & 0x3F;
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idx1);
+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0);
+
-+ rt2x00_dbg(rt2x00dev, "alc=%u, IorQ=%u, idx_final=%2x\n", alc_idx, iorq, idxf[iorq]);
-+ rt2x00_dbg(rt2x00dev, "p0=%x, p1=%x, pf=%x, idx_0=%x, idx_1=%x, ibit=%x !\n", p0, p1, pf, idx0, idx1, ibit);
++ rt2x00_dbg(rt2x00dev, "alc=%u, IorQ=%u, idx_final=%2x\n",
++ alc_idx, iorq, idxf[iorq]);
++ rt2x00_dbg(rt2x00dev, "p0=%x, p1=%x, pf=%x, idx_0=%x, idx_1=%x, ibit=%x\n",
++ p0, p1, pf, idx0, idx1, ibit);
+
-+ if ((bidx != 5) && (pf <= p0) && (pf < p1)) {
-+ pf = pf;
++ if (bidx != 5 && pf <= p0 && pf < p1) {
+ idxf[iorq] = idxf[iorq];
+ } else if (p0 < p1) {
+ pf = p0;
@@ -321,17 +345,15 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ pf = p1;
+ idxf[iorq] = idx1 & 0x3F;
+ }
-+ rt2x00_dbg(rt2x00dev, "IorQ=%u, idx_final[%u]:%x, pf:%8x\n", iorq, iorq, idxf[iorq], pf);
++ rt2x00_dbg(rt2x00dev, "IorQ=%u, idx_final[%u]:%x, pf:%8x\n",
++ iorq, iorq, idxf[iorq], pf);
+
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idxf[iorq]);
-+
+ }
+ ibit = ibit >> 1;
+ }
+ dc_result[ch_idx][alc_idx][0] = idxf[0];
+ dc_result[ch_idx][alc_idx][1] = idxf[1];
-+
-+ return;
+}
+
+static void rt2800_iq_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 *ges, u8 *pes)
@@ -349,26 +371,25 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ u8 bbp = 0;
+ char bidx;
+
-+ rt2x00_info(rt2x00dev, "IQCalibration Start!\n");
+ for (bidx = 5; bidx >= 1; bidx--) {
+ for (gop = 0; gop < 2; gop++) {
-+ rt2x00_dbg(rt2x00dev, "\n========================================================\n");
-+
-+ if ((gop == 1) || (bidx < 4)) {
++ if (gop == 1 || bidx < 4) {
+ if (gop == 0)
+ iq_err = gerr;
+ else
+ iq_err = perr;
+
+ first_search = (gop == 0) ? (bidx == 3) : (bidx == 5);
-+ touch_neg_max = (gop) ? ((iq_err & 0x0F) == 0x08) : ((iq_err & 0x3F) == 0x20);
++ touch_neg_max = (gop) ? ((iq_err & 0x0F) == 0x08) :
++ ((iq_err & 0x3F) == 0x20);
+
+ if (touch_neg_max) {
+ p0 = pf;
+ idx0 = iq_err;
+ } else {
+ idx0 = iq_err - ibit;
-+ bbp = (ch_idx == 0) ? ((gop == 0) ? 0x28 : 0x29): ((gop == 0) ? 0x46 : 0x47);
++ bbp = (ch_idx == 0) ? ((gop == 0) ? 0x28 : 0x29) :
++ ((gop == 0) ? 0x46 : 0x47);
+
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ rt2800_bbp_write(rt2x00dev, 159, idx0);
@@ -379,26 +400,30 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ idx1 = iq_err + (first_search ? 0 : ibit);
+ idx1 = (gop == 0) ? (idx1 & 0x0F) : (idx1 & 0x3F);
+
-+ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 : (gop == 0) ? 0x46 : 0x47;
++ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 :
++ (gop == 0) ? 0x46 : 0x47;
+
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ rt2800_bbp_write(rt2x00dev, 159, idx1);
+
+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1);
+
-+ rt2x00_dbg(rt2x00dev, "p0=%x, p1=%x, pwer_final=%x, idx0=%x, idx1=%x, iq_err=%x, gop=%d, ibit=%x !\n", p0, p1, pf, idx0, idx1, iq_err, gop, ibit);
-+
-+ if ((!first_search) && (pf <= p0) && (pf < p1)) {
-+ pf = pf;
-+ } else if (p0 < p1) {
-+ pf = p0;
-+ iq_err = idx0;
-+ } else {
-+ pf = p1;
-+ iq_err = idx1;
++ rt2x00_dbg(rt2x00dev,
++ "p0=%x, p1=%x, pwer_final=%x, idx0=%x, idx1=%x, iq_err=%x, gop=%d, ibit=%x\n",
++ p0, p1, pf, idx0, idx1, iq_err, gop, ibit);
++
++ if (!(!first_search && pf <= p0 && pf < p1)) {
++ if (p0 < p1) {
++ pf = p0;
++ iq_err = idx0;
++ } else {
++ pf = p1;
++ iq_err = idx1;
++ }
+ }
+
-+ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 : (gop == 0) ? 0x46 : 0x47;
++ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 :
++ (gop == 0) ? 0x46 : 0x47;
+
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ rt2800_bbp_write(rt2x00dev, 159, iq_err);
@@ -408,8 +433,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ else
+ perr = iq_err;
+
-+ rt2x00_dbg(rt2x00dev, "IQCalibration pf=%8x (%2x, %2x) !\n", pf, gerr & 0x0F, perr & 0x3F);
-+
++ rt2x00_dbg(rt2x00dev, "IQCalibration pf=%8x (%2x, %2x) !\n",
++ pf, gerr & 0x0F, perr & 0x3F);
+ }
+ }
+
@@ -438,25 +463,21 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_bbp_write(rt2x00dev, 159, pef & 0x3F);
+
+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1);
-+ if ((gef == gsta) && (pef == psta)) {
++ if (gef == gsta && pef == psta) {
+ pf = p1;
+ gerr = gef;
+ perr = pef;
-+ }
-+ else if (pf > p1){
++ } else if (pf > p1) {
+ pf = p1;
+ gerr = gef;
+ perr = pef;
+ }
-+ rt2x00_dbg(rt2x00dev, "Fine IQCalibration p1=%8x pf=%8x (%2x, %2x) !\n", p1, pf, gef & 0x0F, pef & 0x3F);
++ rt2x00_dbg(rt2x00dev, "Fine IQCalibration p1=%8x pf=%8x (%2x, %2x) !\n",
++ p1, pf, gef & 0x0F, pef & 0x3F);
+ }
+
+ ges[ch_idx] = gerr & 0x0F;
+ pes[ch_idx] = perr & 0x3F;
-+
-+ rt2x00_info(rt2x00dev, "IQCalibration Done! CH = %u, (gain=%2x, phase=%2x)\n", ch_idx, gerr & 0x0F, perr & 0x3F);
-+
-+ return;
+}
+
+static void rt2800_rf_aux_tx0_loopback(struct rt2x00_dev *rt2x00dev)
@@ -493,9 +514,9 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 20, 0x20);
+}
+
-+void rt2800_loft_iq_calibration(struct rt2x00_dev *rt2x00dev)
++static void rt2800_loft_iq_calibration(struct rt2x00_dev *rt2x00dev)
+{
-+ rf_reg_pair rf_store[CHAIN_NUM][13];
++ struct rf_reg_pair rf_store[CHAIN_NUM][13];
+ u32 macorg1 = 0;
+ u32 macorg2 = 0;
+ u32 macorg3 = 0;
@@ -504,7 +525,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ u32 orig528 = 0;
+ u32 orig52c = 0;
+
-+ u32 savemacsysctrl = 0, mtxcycle = 0;
++ u32 savemacsysctrl = 0;
+ u32 macvalue = 0;
+ u32 mac13b8 = 0;
+ u32 p0 = 0, p1 = 0;
@@ -513,11 +534,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ u8 rfvalue;
+ u8 loft_dc_search_result[CHAIN_NUM][RF_ALC_NUM][2];
+ u8 ger[CHAIN_NUM], per[CHAIN_NUM];
-+ u8 rf_gain[] = {0x00, 0x01, 0x02, 0x04, 0x08, 0x0c};
-+ u8 rfvga_gain_table[] = {0x24, 0x25, 0x26, 0x27, 0x28, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, 0x31, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3F};
+
+ u8 vga_gain[] = {14, 14};
-+ u8 bbp_2324gain[] = {0x16, 0x14, 0x12, 0x10, 0x0c, 0x08};
+ u8 bbp = 0, ch_idx = 0, rf_alc_idx = 0, idx = 0;
+ u8 bbpr30, rfb0r39, rfb0r42;
+ u8 bbpr1;
@@ -525,6 +543,11 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ u8 bbpr241, bbpr242;
+ u8 count_step;
+
++ static const u8 rf_gain[] = {0x00, 0x01, 0x02, 0x04, 0x08, 0x0c};
++ static const u8 rfvga_gain_table[] = {0x24, 0x25, 0x26, 0x27, 0x28, 0x2c, 0x2d, 0x2e, 0x2f, 0x30,
++ 0x31, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3F};
++ static const u8 bbp_2324gain[] = {0x16, 0x14, 0x12, 0x10, 0x0c, 0x08};
++
+ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
+ macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
+ macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
@@ -539,29 +562,18 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ macvalue &= (~0x04);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue);
+
-+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) {
-+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
-+ if (macvalue & 0x01)
-+ udelay(50);
-+ else
-+ break;
-+ }
++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX)))
++ rt2x00_warn(rt2x00dev, "RF TX busy in LOFT IQ calibration\n");
+
+ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
+ macvalue &= (~0x08);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue);
+
-+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) {
-+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
-+ if (macvalue & 0x02)
-+ udelay(50);
-+ else
-+ break;
-+ }
++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX)))
++ rt2x00_warn(rt2x00dev, "RF RX busy in LOFT IQ calibration\n");
+
-+ for (ch_idx = 0; ch_idx < 2; ch_idx++) {
++ for (ch_idx = 0; ch_idx < 2; ch_idx++)
+ rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx);
-+ }
+
+ bbpr30 = rt2800_bbp_read(rt2x00dev, 30);
+ rfb0r39 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 39);
@@ -576,7 +588,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+
+ rt2800_setbbptonegenerator(rt2x00dev);
+
-+ for (ch_idx = 0; ch_idx < 2; ch_idx ++) {
++ for (ch_idx = 0; ch_idx < 2; ch_idx++) {
+ rt2800_bbp_write(rt2x00dev, 23, 0x00);
+ rt2800_bbp_write(rt2x00dev, 24, 0x00);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00);
@@ -586,18 +598,17 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_register_write(rt2x00dev, 0x13b8, 0x10);
+ udelay(1);
+
-+ if (ch_idx == 0) {
++ if (ch_idx == 0)
+ rt2800_rf_aux_tx0_loopback(rt2x00dev);
-+ } else {
++ else
+ rt2800_rf_aux_tx1_loopback(rt2x00dev);
-+ }
++
+ udelay(1);
+
-+ if (ch_idx == 0) {
++ if (ch_idx == 0)
+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001004);
-+ } else {
++ else
+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002004);
-+ }
+
+ rt2800_bbp_write(rt2x00dev, 158, 0x05);
+ rt2800_bbp_write(rt2x00dev, 159, 0x00);
@@ -623,7 +634,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+
+ if (rf_alc_idx == 0) {
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x21);
-+ for (;vga_gain[ch_idx] > 0;vga_gain[ch_idx] = vga_gain[ch_idx] - 2) {
++ for (; vga_gain[ch_idx] > 0;
++ vga_gain[ch_idx] = vga_gain[ch_idx] - 2) {
+ rfvalue = rfvga_gain_table[vga_gain[ch_idx]];
+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue);
+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue);
@@ -633,15 +645,15 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x21);
+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0);
+ rt2x00_dbg(rt2x00dev, "LOFT AGC %d %d\n", p0, p1);
-+ if ((p0 < 7000*7000) && (p1 < (7000*7000))) {
++ if ((p0 < 7000 * 7000) && (p1 < (7000 * 7000)))
+ break;
-+ }
+ }
+
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x00);
+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x00);
+
-+ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n",vga_gain[ch_idx], rfvga_gain_table[vga_gain[ch_idx]]);
++ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx],
++ rfvga_gain_table[vga_gain[ch_idx]]);
+
+ if (vga_gain[ch_idx] < 0)
+ vga_gain[ch_idx] = 0;
@@ -659,7 +671,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) {
+ for (idx = 0; idx < 4; idx++) {
+ rt2800_bbp_write(rt2x00dev, 158, 0xB0);
-+ bbp = (idx<<2) + rf_alc_idx;
++ bbp = (idx << 2) + rf_alc_idx;
+ rt2800_bbp_write(rt2x00dev, 159, bbp);
+ rt2x00_dbg(rt2x00dev, " ALC %2x,", bbp);
+
@@ -720,8 +732,6 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_register_write(rt2x00dev, RF_BYPASS2, orig52c);
+ rt2800_register_write(rt2x00dev, 0x13b8, mac13b8);
+
-+ rt2x00_info(rt2x00dev, "LOFT Calibration Done!\n");
-+
+ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
+ macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
+ macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
@@ -738,24 +748,16 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
+ macvalue &= (~0x04);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue);
-+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) {
-+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
-+ if (macvalue & 0x01)
-+ udelay(50);
-+ else
-+ break;
-+ }
++
++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX)))
++ rt2x00_warn(rt2x00dev, "RF TX busy in LOFT IQ calibration\n");
+
+ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL);
+ macvalue &= (~0x08);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue);
-+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) {
-+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
-+ if (macvalue & 0x02)
-+ udelay(50);
-+ else
-+ break;
-+ }
++
++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX)))
++ rt2x00_warn(rt2x00dev, "RF RX busy in LOFT IQ calibration\n");
+
+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
+ rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x00000101);
@@ -791,9 +793,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+
+ rt2800_register_write(rt2x00dev, 0x13b8, 0x00000010);
+
-+ for (ch_idx = 0; ch_idx < 2; ch_idx++) {
++ for (ch_idx = 0; ch_idx < 2; ch_idx++)
+ rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx);
-+ }
+
+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x3B);
+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x3B);
@@ -803,7 +804,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_bbp_write(rt2x00dev, 158, 0xB0);
+ rt2800_bbp_write(rt2x00dev, 159, 0x80);
+
-+ for (ch_idx = 0; ch_idx < 2; ch_idx ++) {
++ for (ch_idx = 0; ch_idx < 2; ch_idx++) {
+ rt2800_bbp_write(rt2x00dev, 23, 0x00);
+ rt2800_bbp_write(rt2x00dev, 24, 0x00);
+
@@ -846,7 +847,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ count_step = 2;
+ }
+
-+ for (;vga_gain[ch_idx] < 19; vga_gain[ch_idx]=(vga_gain[ch_idx] + count_step)) {
++ for (; vga_gain[ch_idx] < 19; vga_gain[ch_idx] = (vga_gain[ch_idx] + count_step)) {
+ rfvalue = rfvga_gain_table[vga_gain[ch_idx]];
+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue);
+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue);
@@ -855,37 +856,35 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ rt2800_bbp_write(rt2x00dev, 159, 0x00);
+ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0);
-+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags))
+ p0_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A);
-+ }
+
+ bbp = (ch_idx == 0) ? 0x29 : 0x47;
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
+ rt2800_bbp_write(rt2x00dev, 159, 0x21);
+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0);
-+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags)) {
++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags))
+ p1_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A);
-+ }
+
+ rt2x00_dbg(rt2x00dev, "IQ AGC %d %d\n", p0, p1);
+
+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
+ rt2x00_dbg(rt2x00dev, "IQ AGC IDX 10 %d %d\n", p0_idx10, p1_idx10);
-+ if ((p0_idx10 > 7000*7000) || (p1_idx10 > 7000*7000)) {
-+ if (vga_gain[ch_idx]!=0)
-+ vga_gain[ch_idx] = vga_gain[ch_idx]-1;
++ if ((p0_idx10 > 7000 * 7000) || (p1_idx10 > 7000 * 7000)) {
++ if (vga_gain[ch_idx] != 0)
++ vga_gain[ch_idx] = vga_gain[ch_idx] - 1;
+ break;
+ }
+ }
+
-+ if ((p0 > 2500*2500) || (p1 > 2500*2500)) {
++ if ((p0 > 2500 * 2500) || (p1 > 2500 * 2500))
+ break;
-+ }
+ }
+
+ if (vga_gain[ch_idx] > 18)
+ vga_gain[ch_idx] = 18;
-+ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n",vga_gain[ch_idx], rfvga_gain_table[vga_gain[ch_idx]]);
++ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx],
++ rfvga_gain_table[vga_gain[ch_idx]]);
+
+ bbp = (ch_idx == 0) ? 0x29 : 0x47;
+ rt2800_bbp_write(rt2x00dev, 158, bbp);
@@ -930,9 +929,8 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 39, rfb0r39);
+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfb0r42);
+
-+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) {
++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags))
+ rt2800_bbp_write(rt2x00dev, 4, bbpr4);
-+ }
+
+ rt2800_bbp_write(rt2x00dev, 21, 0x01);
+ udelay(1);
@@ -950,16 +948,12 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+ rt2800_register_write(rt2x00dev, RF_BYPASS3, macorg5);
+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl);
+ rt2800_register_write(rt2x00dev, 0x13b8, mac13b8);
-+
-+ rt2x00_info(rt2x00dev, "TX IQ Calibration Done!\n");
-+
-+ return;
+}
+
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9691,6 +10628,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9653,6 +10554,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rxdcoc_calibration(rt2x00dev);
rt2800_bw_filter_calibration(rt2x00dev, true);
rt2800_bw_filter_calibration(rt2x00dev, false);
@@ -978,11 +972,11 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
+#define RF_ALC_NUM 6
+#define CHAIN_NUM 2
+
-+typedef struct rf_reg_pair {
++struct rf_reg_pair {
+ u8 bank;
+ u8 reg;
+ u8 value;
-+} rf_reg_pair;
++};
/* RT2800 driver data structure */
struct rt2800_drv_data {
diff --git a/package/kernel/mac80211/patches/rt2x00/011-rt2x00-move-helper-functions-up-in-file.patch b/package/kernel/mac80211/patches/rt2x00/011-rt2x00-move-helper-functions-up-in-file.patch
new file mode 100644
index 0000000000..07a32b17be
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/011-rt2x00-move-helper-functions-up-in-file.patch
@@ -0,0 +1,94 @@
+From patchwork Sat Sep 17 20:28:58 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979252
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:28:58 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 11/16] rt2x00: move helper functions up in file
+Message-ID:
+ <c27baa8efd5c29e2bcb2432925d9cdc5c913a125.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+Move register access helper functions up to the head of the file so
+they can be used in all functions.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 40 +++++++++----------
+ 1 file changed, 20 insertions(+), 20 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -198,6 +198,26 @@ static void rt2800_rfcsr_write_dccal(str
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, reg, value);
+ }
+
++static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev,
++ const u8 reg, const u8 value)
++{
++ rt2800_bbp_write(rt2x00dev, 158, reg);
++ rt2800_bbp_write(rt2x00dev, 159, value);
++}
++
++static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg)
++{
++ rt2800_bbp_write(rt2x00dev, 158, reg);
++ return rt2800_bbp_read(rt2x00dev, 159);
++}
++
++static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev,
++ const u8 reg, const u8 value)
++{
++ rt2800_bbp_write(rt2x00dev, 195, reg);
++ rt2800_bbp_write(rt2x00dev, 196, value);
++}
++
+ static u8 rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word)
+ {
+@@ -6947,26 +6967,6 @@ static void rt2800_init_bbp_5592(struct
+ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
+ }
+
+-static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev,
+- const u8 reg, const u8 value)
+-{
+- rt2800_bbp_write(rt2x00dev, 195, reg);
+- rt2800_bbp_write(rt2x00dev, 196, value);
+-}
+-
+-static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev,
+- const u8 reg, const u8 value)
+-{
+- rt2800_bbp_write(rt2x00dev, 158, reg);
+- rt2800_bbp_write(rt2x00dev, 159, value);
+-}
+-
+-static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg)
+-{
+- rt2800_bbp_write(rt2x00dev, 158, reg);
+- return rt2800_bbp_read(rt2x00dev, 159);
+-}
+-
+ static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev)
+ {
+ u8 bbp;
diff --git a/package/kernel/mac80211/patches/rt2x00/012-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/012-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch
new file mode 100644
index 0000000000..e989205ba2
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/012-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch
@@ -0,0 +1,56 @@
+From patchwork Sat Sep 17 20:29:13 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979253
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:29:13 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 12/16] rt2x00: fix HT20/HT40 bandwidth switch on MT7620
+Message-ID:
+ <1664d89ba149f7b0bcec18b2a2abaedf49654507.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+Add missing configuration of the channel bandwidth filter to the
+channel setup function for MT7620.
+
+Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3855,6 +3855,14 @@ static void rt2800_config_channel_rf7620
+ rfcsr |= tx_agc_fc;
+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr);
+ }
++
++ if (conf_is_ht40(conf)) {
++ rt2800_bbp_glrt_write(rt2x00dev, 141, 0x10);
++ rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2f);
++ } else {
++ rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1a);
++ rt2800_bbp_glrt_write(rt2x00dev, 157, 0x40);
++ }
+ }
+
+ static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev,
diff --git a/package/kernel/mac80211/patches/rt2x00/013-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/013-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT7620.patch
new file mode 100644
index 0000000000..3d7af17b16
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/013-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT7620.patch
@@ -0,0 +1,52 @@
+From patchwork Sat Sep 17 20:29:26 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979254
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:29:26 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 13/16] rt2x00: set correct TX_SW_CFG1 MAC register for
+ MT7620
+Message-ID:
+ <4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the
+vendor driver[1].
+
+[1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531
+Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -5966,7 +5966,7 @@ static int rt2800_init_registers(struct
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
+ } else if (rt2x00_rt(rt2x00dev, RT6352)) {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
+- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
++ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+ rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
+ rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
diff --git a/package/kernel/mac80211/patches/rt2x00/014-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/014-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch
new file mode 100644
index 0000000000..27b8d92cd2
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/014-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch
@@ -0,0 +1,50 @@
+From patchwork Sat Sep 17 20:29:40 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979255
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:29:40 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 14/16] rt2x00: set VGC gain for both chains of MT7620
+Message-ID:
+ <29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+Set bbp66 for all chains of the MT7620.
+
+Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -5743,7 +5743,8 @@ static inline void rt2800_set_vgc(struct
+ if (qual->vgc_level != vgc_level) {
+ if (rt2x00_rt(rt2x00dev, RT3572) ||
+ rt2x00_rt(rt2x00dev, RT3593) ||
+- rt2x00_rt(rt2x00dev, RT3883)) {
++ rt2x00_rt(rt2x00dev, RT3883) ||
++ rt2x00_rt(rt2x00dev, RT6352)) {
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
+ vgc_level);
+ } else if (rt2x00_rt(rt2x00dev, RT5592)) {
diff --git a/package/kernel/mac80211/patches/rt2x00/015-rt2x00-set-SoC-wmac-clock-register.patch b/package/kernel/mac80211/patches/rt2x00/015-rt2x00-set-SoC-wmac-clock-register.patch
new file mode 100644
index 0000000000..3cadc91da6
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/015-rt2x00-set-SoC-wmac-clock-register.patch
@@ -0,0 +1,70 @@
+From patchwork Sat Sep 17 20:29:55 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979256
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+Date: Sat, 17 Sep 2022 21:29:55 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 15/16] rt2x00: set SoC wmac clock register
+Message-ID:
+ <3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+Instead of using the default value 33 (pci), set US_CYC_CNT init based
+on Programming guide:
+If available, set chipset bus clock with fallback to cpu clock/3.
+
+Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 21 +++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -6229,6 +6229,27 @@ static int rt2800_init_registers(struct
+ reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
+ rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 125);
+ rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
++ } else if (rt2x00_is_soc(rt2x00dev)) {
++ struct clk *clk = clk_get_sys("bus", NULL);
++ int rate;
++
++ if (IS_ERR(clk)) {
++ clk = clk_get_sys("cpu", NULL);
++
++ if (IS_ERR(clk)) {
++ rate = 125;
++ } else {
++ rate = clk_get_rate(clk) / 3000000;
++ clk_put(clk);
++ }
++ } else {
++ rate = clk_get_rate(clk) / 1000000;
++ clk_put(clk);
++ }
++
++ reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
++ rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, rate);
++ rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
+ }
+
+ reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0);
diff --git a/package/kernel/mac80211/patches/rt2x00/016-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/016-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch
new file mode 100644
index 0000000000..5ddbbf1dd6
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/016-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch
@@ -0,0 +1,79 @@
+From patchwork Sat Sep 17 20:30:09 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 12979257
+X-Patchwork-Delegate: kvalo@adurom.com
+Return-Path: <linux-wireless-owner@kernel.org>
+X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
+ aws-us-west-2-korg-lkml-1.web.codeaurora.org
+Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
+ by smtp.lore.kernel.org (Postfix) with ESMTP id E9118ECAAA1
+ for <linux-wireless@archiver.kernel.org>;
+ Sat, 17 Sep 2022 20:30:22 +0000 (UTC)
+Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
+ id S229639AbiIQUaV (ORCPT
+ <rfc822;linux-wireless@archiver.kernel.org>);
+ Sat, 17 Sep 2022 16:30:21 -0400
+Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53912 "EHLO
+ lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
+ with ESMTP id S229628AbiIQUaT (ORCPT
+ <rfc822;linux-wireless@vger.kernel.org>);
+ Sat, 17 Sep 2022 16:30:19 -0400
+Received: from fudo.makrotopia.org (fudo.makrotopia.org
+ [IPv6:2a07:2ec0:3002::71])
+ by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1AEA822B27
+ for <linux-wireless@vger.kernel.org>;
+ Sat, 17 Sep 2022 13:30:16 -0700 (PDT)
+Received: from local
+ by fudo.makrotopia.org with esmtpsa
+ (TLS1.3:TLS_AES_256_GCM_SHA384:256)
+ (Exim 4.96)
+ (envelope-from <daniel@makrotopia.org>)
+ id 1oZeS7-0003ra-0k;
+ Sat, 17 Sep 2022 22:30:15 +0200
+Date: Sat, 17 Sep 2022 21:30:09 +0100
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ "David S. Miller" <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+Subject: [PATCH v3 16/16] rt2x00: correctly set BBP register 86 for MT7620
+Message-ID:
+ <257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org>
+References: <cover.1663445157.git.daniel@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
+Precedence: bulk
+List-ID: <linux-wireless.vger.kernel.org>
+X-Mailing-List: linux-wireless@vger.kernel.org
+
+Instead of 0 set the correct value for BBP register 86 for MT7620.
+
+Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -4225,7 +4225,10 @@ static void rt2800_config_channel(struct
+ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+- rt2800_bbp_write(rt2x00dev, 86, 0);
++ if (rt2x00_rt(rt2x00dev, RT6352))
++ rt2800_bbp_write(rt2x00dev, 86, 0x38);
++ else
++ rt2800_bbp_write(rt2x00dev, 86, 0);
+ }
+
+ if (rf->channel <= 14) {
diff --git a/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch b/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch
index 21ed9882b0..ba16e85510 100644
--- a/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch
+++ b/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch
@@ -48,7 +48,7 @@
obj-$(CPTCFG_RT2X00_LIB_MMIO) += rt2x00mmio.o
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -37,6 +37,8 @@ struct rt2800_drv_data {
+@@ -47,6 +47,8 @@ struct rt2800_drv_data {
struct ieee80211_sta *wcid_to_sta[STA_IDS_SIZE];
};
@@ -57,7 +57,7 @@
struct rt2800_ops {
u32 (*register_read)(struct rt2x00_dev *rt2x00dev,
const unsigned int offset);
-@@ -135,6 +137,15 @@ static inline int rt2800_read_eeprom(str
+@@ -145,6 +147,15 @@ static inline int rt2800_read_eeprom(str
{
const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
@@ -127,7 +127,7 @@
DECLARE_KFIFO_PTR(txstatus_fifo, u32);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1401,6 +1401,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de
+@@ -1419,6 +1419,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de
INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
@@ -138,7 +138,7 @@
/*
* Let the driver probe the device to detect the capabilities.
*/
-@@ -1541,6 +1545,11 @@ void rt2x00lib_remove_dev(struct rt2x00_
+@@ -1559,6 +1563,11 @@ void rt2x00lib_remove_dev(struct rt2x00_
* Free the driver data.
*/
kfree(rt2x00dev->drv_data);
diff --git a/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch b/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch
index d78b76d7f5..acc8a8edb8 100644
--- a/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch
+++ b/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch
@@ -8,7 +8,7 @@
#include "rt2x00.h"
#include "rt2800lib.h"
-@@ -9549,6 +9550,17 @@ static int rt2800_init_eeprom(struct rt2
+@@ -11131,6 +11132,17 @@ static int rt2800_init_eeprom(struct rt2
rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
diff --git a/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch b/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch
index 0da9356e0c..5ef5fc8def 100644
--- a/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch
+++ b/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1340,7 +1340,7 @@ static inline void rt2x00lib_set_if_comb
+@@ -1358,7 +1358,7 @@ static inline void rt2x00lib_set_if_comb
*/
if_limit = &rt2x00dev->if_limits_ap;
if_limit->max = rt2x00dev->ops->max_ap_intf;
diff --git a/package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch b/package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch
deleted file mode 100644
index f27873acc0..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: David Bauer <mail@david-bauer.net>
-Date: Mon, 16 Dec 2019 20:47:06 +0100
-Subject: [PATCH] rt2x00: add throughput LED trigger
-
-This adds a (currently missing) throughput LED trigger for the rt2x00
-driver. Previously, LED triggers had to be assigned to the netdev, which
-was limited to a single VAP.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-Tested-by: Christoph Krapp <achterin@googlemail.com>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1125,6 +1125,19 @@ static void rt2x00lib_remove_hw(struct r
- kfree(rt2x00dev->spec.channels_info);
- }
-
-+static const struct ieee80211_tpt_blink rt2x00_tpt_blink[] = {
-+ { .throughput = 0 * 1024, .blink_time = 334 },
-+ { .throughput = 1 * 1024, .blink_time = 260 },
-+ { .throughput = 2 * 1024, .blink_time = 220 },
-+ { .throughput = 5 * 1024, .blink_time = 190 },
-+ { .throughput = 10 * 1024, .blink_time = 170 },
-+ { .throughput = 25 * 1024, .blink_time = 150 },
-+ { .throughput = 54 * 1024, .blink_time = 130 },
-+ { .throughput = 120 * 1024, .blink_time = 110 },
-+ { .throughput = 265 * 1024, .blink_time = 80 },
-+ { .throughput = 586 * 1024, .blink_time = 50 },
-+};
-+
- static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
- {
- struct hw_mode_spec *spec = &rt2x00dev->spec;
-@@ -1206,6 +1219,10 @@ static int rt2x00lib_probe_hw(struct rt2
-
- #undef RT2X00_TASKLET_INIT
-
-+ ieee80211_create_tpt_led_trigger(rt2x00dev->hw,
-+ IEEE80211_TPT_LEDTRIG_FL_RADIO, rt2x00_tpt_blink,
-+ ARRAY_SIZE(rt2x00_tpt_blink));
-+
- /*
- * Register HW.
- */
diff --git a/package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch
new file mode 100644
index 0000000000..deaa03be6c
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch
@@ -0,0 +1,161 @@
+From 0fce1109f894ec7fcd72cb098843a1eff786716a Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel@makrotopia.org>
+Date: Fri, 16 Sep 2022 20:49:42 +0100
+Subject: [PATCH 16/16] rt2x00: import support for external LNA on MT7620
+To: linux-wireless@vger.kernel.org,
+ Stanislaw Gruszka <stf_xl@wp.pl>,
+ Helmut Schaa <helmut.schaa@googlemail.com>
+Cc: Kalle Valo <kvalo@kernel.org>,
+ David S. Miller <davem@davemloft.net>,
+ Eric Dumazet <edumazet@google.com>,
+ Jakub Kicinski <kuba@kernel.org>,
+ Paolo Abeni <pabeni@redhat.com>,
+ Johannes Berg <johannes.berg@intel.com>
+
+In order to carry out calibration on boards with ePA or eLNA the PA pin
+needs to be switch to GPIO mode on MT7620. Implement that by selecting
+pinctrl state "pa_gpio" which should be defined for MT7620 boards with
+eLNA or ePA beside the "default" state.
+
+Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 58 +++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2x00.h | 5 ++
+ .../net/wireless/ralink/rt2x00/rt2x00soc.c | 15 +++++
+ 3 files changed, 78 insertions(+)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -304,6 +304,24 @@ static void rt2800_rf_write(struct rt2x0
+ mutex_unlock(&rt2x00dev->csr_mutex);
+ }
+
++void rt6352_enable_pa_pin(struct rt2x00_dev *rt2x00dev, int enable)
++{
++ if (!rt2x00dev->pinctrl)
++ return;
++
++ if (enable) {
++ if (!rt2x00dev->pins_default)
++ return;
++
++ pinctrl_select_state(rt2x00dev->pinctrl, rt2x00dev->pins_default);
++ } else {
++ if (!rt2x00dev->pins_pa_gpio)
++ return;
++
++ pinctrl_select_state(rt2x00dev->pinctrl, rt2x00dev->pins_pa_gpio);
++ }
++}
++
+ static const unsigned int rt2800_eeprom_map[EEPROM_WORD_COUNT] = {
+ [EEPROM_CHIP_ID] = 0x0000,
+ [EEPROM_VERSION] = 0x0001,
+@@ -4469,6 +4487,29 @@ static void rt2800_config_channel(struct
+ rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN,
+ 0x6C6C6B6C);
+ }
++
++ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
++ reg = rt2800_register_read(rt2x00dev, RF_CONTROL3);
++ reg |= 0x00000101;
++ rt2800_register_write(rt2x00dev, RF_CONTROL3, reg);
++
++ reg = rt2800_register_read(rt2x00dev, RF_BYPASS3);
++ reg |= 0x00000101;
++ rt2800_register_write(rt2x00dev, RF_BYPASS3, reg);
++
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x66);
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x20);
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x42);
++ rt2800_bbp_write(rt2x00dev, 75, 0x68);
++ rt2800_bbp_write(rt2x00dev, 76, 0x4C);
++ rt2800_bbp_write(rt2x00dev, 79, 0x1C);
++ rt2800_bbp_write(rt2x00dev, 80, 0x0C);
++ rt2800_bbp_write(rt2x00dev, 82, 0xB6);
++ /* bank 0 RF reg 42 and glrt BBP reg 141 will be set in
++ * config channel function in dependence of channel and
++ * HT20/HT40 so don't touch it
++ */
++ }
+ }
+
+ bbp = rt2800_bbp_read(rt2x00dev, 4);
+@@ -10583,6 +10624,7 @@ static void rt2800_init_rfcsr_6352(struc
+ rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
+ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
+
++ rt6352_enable_pa_pin(rt2x00dev, 0);
+ rt2800_r_calibration(rt2x00dev);
+ rt2800_rf_self_txdc_cal(rt2x00dev);
+ rt2800_rxdcoc_calibration(rt2x00dev);
+@@ -10590,6 +10632,22 @@ static void rt2800_init_rfcsr_6352(struc
+ rt2800_bw_filter_calibration(rt2x00dev, false);
+ rt2800_loft_iq_calibration(rt2x00dev);
+ rt2800_rxiq_calibration(rt2x00dev);
++ rt6352_enable_pa_pin(rt2x00dev, 1);
++
++ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x66);
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x20);
++ rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x42);
++ rt2800_bbp_write(rt2x00dev, 75, 0x68);
++ rt2800_bbp_write(rt2x00dev, 76, 0x4C);
++ rt2800_bbp_write(rt2x00dev, 79, 0x1C);
++ rt2800_bbp_write(rt2x00dev, 80, 0x0C);
++ rt2800_bbp_write(rt2x00dev, 82, 0xB6);
++ /* bank 0 RF reg 42 and glrt BBP reg 141 will be set in config
++ * channel function in dependence of channel and HT20/HT40,
++ * so don't touch them here.
++ */
++ }
+ }
+
+ static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -28,6 +28,7 @@
+ #include <linux/average.h>
+ #include <linux/usb.h>
+ #include <linux/clk.h>
++#include <linux/pinctrl/consumer.h>
+ #include <linux/rt2x00_platform.h>
+
+ #include <net/mac80211.h>
+@@ -1029,6 +1030,11 @@ struct rt2x00_dev {
+
+ /* Clock for System On Chip devices. */
+ struct clk *clk;
++
++ /* pinctrl and states for System On Chip devices with PA/LNA. */
++ struct pinctrl *pinctrl;
++ struct pinctrl_state *pins_default;
++ struct pinctrl_state *pins_pa_gpio;
+ };
+
+ struct rt2x00_bar_list_entry {
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
+@@ -97,6 +97,21 @@ int rt2x00soc_probe(struct platform_devi
+ if (retval)
+ goto exit_free_reg;
+
++ rt2x00dev->pinctrl = devm_pinctrl_get(&pdev->dev);
++ if (IS_ERR(rt2x00dev->pinctrl)) {
++ rt2x00dev->pinctrl = NULL;
++ rt2x00dev->pins_default = NULL;
++ rt2x00dev->pins_pa_gpio = NULL;
++ } else {
++ rt2x00dev->pins_default = pinctrl_lookup_state(rt2x00dev->pinctrl, "default");
++ if (IS_ERR(rt2x00dev->pins_default))
++ rt2x00dev->pins_default = NULL;
++
++ rt2x00dev->pins_pa_gpio = pinctrl_lookup_state(rt2x00dev->pinctrl, "pa_gpio");
++ if (IS_ERR(rt2x00dev->pins_pa_gpio))
++ rt2x00dev->pins_pa_gpio = NULL;
++ }
++
+ return 0;
+
+ exit_free_reg:
diff --git a/package/kernel/mac80211/patches/rt2x00/990-rt2x00-mt7620-introduce-accessors-for-CHIP_VER-register.patch b/package/kernel/mac80211/patches/rt2x00/995-rt2x00-mt7620-introduce-accessors-for-CHIP_VER-register.patch
index 76114fe9ae..76114fe9ae 100644
--- a/package/kernel/mac80211/patches/rt2x00/990-rt2x00-mt7620-introduce-accessors-for-CHIP_VER-register.patch
+++ b/package/kernel/mac80211/patches/rt2x00/995-rt2x00-mt7620-introduce-accessors-for-CHIP_VER-register.patch
diff --git a/package/kernel/mac80211/patches/rt2x00/991-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch b/package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch
index 40b20ec594..dab6e05ffd 100644
--- a/package/kernel/mac80211/patches/rt2x00/991-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch
+++ b/package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -1042,6 +1042,11 @@
+@@ -1044,6 +1044,11 @@
#define MIMO_PS_CFG_RX_STBY_POL FIELD32(0x00000010)
#define MIMO_PS_CFG_RX_RX_STBY0 FIELD32(0x00000020)
@@ -14,7 +14,7 @@
*/
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3698,14 +3698,16 @@ static void rt2800_config_channel_rf7620
+@@ -3778,14 +3778,16 @@ static void rt2800_config_channel_rf7620
rt2x00_set_field8(&rfcsr, RFCSR19_K, rf->rf4);
rt2800_rfcsr_write(rt2x00dev, 19, rfcsr);
@@ -39,7 +39,7 @@
rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_EN_MT7620,
-@@ -3739,18 +3741,23 @@ static void rt2800_config_channel_rf7620
+@@ -3819,18 +3821,23 @@ static void rt2800_config_channel_rf7620
rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x20);
}
@@ -73,9 +73,9 @@
if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) {
if (conf_is_ht40(conf)) {
-@@ -3850,25 +3857,29 @@ static void rt2800_config_alc(struct rt2
- if (i == 10000)
- rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n");
+@@ -3929,25 +3936,29 @@ static void rt2800_config_alc(struct rt2
+ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY)))
+ rt2x00_warn(rt2x00dev, "RF busy while configuring ALC\n");
- if (chan->center_freq > 2457) {
- bbp = rt2800_bbp_read(rt2x00dev, 30);
@@ -121,12 +121,12 @@
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl);
rt2800_vco_calibration(rt2x00dev);
-@@ -5906,18 +5917,33 @@ static int rt2800_init_registers(struct
+@@ -6011,18 +6022,33 @@ static int rt2800_init_registers(struct
} else if (rt2x00_rt(rt2x00dev, RT5350)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
} else if (rt2x00_rt(rt2x00dev, RT6352)) {
- rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
-- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
+- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
- rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
- rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
@@ -150,7 +150,7 @@
+ 0x00550055);
+ } else {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
++ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+ rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
+ rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
@@ -167,7 +167,7 @@
reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1);
rt2x00_set_field32(&reg, TX_ALC_CFG_1_ROS_BUSY_EN, 0);
rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
-@@ -7061,14 +7087,16 @@ static void rt2800_init_bbp_6352(struct
+@@ -7127,14 +7153,16 @@ static void rt2800_init_bbp_6352(struct
rt2800_bbp_write(rt2x00dev, 188, 0x00);
rt2800_bbp_write(rt2x00dev, 189, 0x00);
@@ -192,7 +192,7 @@
/* BBP for G band GLRT function (BBP_128 ~ BBP_221) */
rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00);
-@@ -10407,31 +10435,36 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -10408,31 +10436,36 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write(rt2x00dev, 42, 0x5B);
rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
@@ -254,7 +254,7 @@
/* Initialize RF channel register to default value */
rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03);
-@@ -10497,63 +10530,71 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -10498,63 +10531,71 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write_bank(rt2x00dev, 6, 45, 0xC5);
@@ -383,7 +383,7 @@
/* Initialize RF DC calibration register to default value */
rt2800_rfcsr_write_dccal(rt2x00dev, 0, 0x47);
-@@ -10616,12 +10657,17 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -10617,12 +10658,17 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write_dccal(rt2x00dev, 62, 0x00);
rt2800_rfcsr_write_dccal(rt2x00dev, 63, 0x00);
@@ -404,5 +404,5 @@
+ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
+ }
+ rt6352_enable_pa_pin(rt2x00dev, 0);
rt2800_r_calibration(rt2x00dev);
- rt2800_rf_self_txdc_cal(rt2x00dev);