aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-03-25 18:46:26 +0100
committerPetr Štetiar <ynezz@true.cz>2019-04-02 02:10:59 +0200
commit141698ce8fbc52d253c9207ef46b3630a0870567 (patch)
tree8226c8567b438f718199ed4c416d06945b8fd672 /target/linux/ath79/base-files/etc
parent5ec205d7ac00de89510a6e71055d45aa57b705e1 (diff)
downloadupstream-141698ce8fbc52d253c9207ef46b3630a0870567.tar.gz
upstream-141698ce8fbc52d253c9207ef46b3630a0870567.tar.bz2
upstream-141698ce8fbc52d253c9207ef46b3630a0870567.zip
ath79: Add support for TP-Link CPE210 v2
This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 This is based on the support patch for the identical CPE210 v3 by Mario Schroen <m.schroen@web.de>. Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [renamed dtsi filename] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ath79/base-files/etc')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
2 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 47fac18281..af26425da2 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -123,6 +123,7 @@ tplink,archer-c6-v2)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C"
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
;;
+tplink,cpe210-v2|\
tplink,cpe210-v3)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 1041af561e..fbf15e4ed8 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -19,6 +19,7 @@ ath79_setup_interfaces()
pcs,cap324|\
pisen,wmm003n|\
pqi,air-pen|\
+ tplink,cpe210-v2|\
tplink,cpe210-v3|\
tplink,re350k-v1|\
tplink,re450-v2|\