diff options
| author | Andrey Bondar <a.bondar@8devices.com> | 2020-06-26 11:16:00 +0300 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-07-07 19:47:24 +0200 |
| commit | 326e488c7b02fb291e0b01970db3482284307c8d (patch) | |
| tree | 18291117b0b51bea45da76917c3ede3678c24a69 /target/linux/ath79/nand/base-files | |
| parent | 4e57fd5adaf0c937da1e947f32dfa9ae513637a5 (diff) | |
| download | upstream-326e488c7b02fb291e0b01970db3482284307c8d.tar.gz upstream-326e488c7b02fb291e0b01970db3482284307c8d.tar.bz2 upstream-326e488c7b02fb291e0b01970db3482284307c8d.zip | |
ath79: add support for 8devices Rambutan board
Rambutan is a Wifi module based on QCA9550/9557
http://www.8devices.com/products/rambutan
Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of DDR2 RAM
- 128 MB of NAND Flash
- 1x 100Mbps Ethernet
- 1x 1000Mbps Ethernet (PHY on dev-kit)
- 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz
- 2x U.FL connectors on module, chip antennas on dev-kit
- 1x miniPCIe slot
- 2x USB2.0 host
- 2x UART
- SPI, I2C, GPIO
Flash instructions:
Upgrade from ar71xx target:
sysupgrade -F /tmp/openwrt-ath79-nand-8dev_rambutan-squashfs-sysupgrade.tar
or upgrade from GUI (don't save config)
Use factory image to flash from U-Boot:
tftpboot 80060000 openwrt-ath79-nand-8dev_rambutan-squashfs-factory.ubi
nand erase.part ubi
nand write 80060000 ubi ${filesize}
Signed-off-by: Petr Štetiar <ynezz@true.cz> [copy&pasted missing commit description]
Signed-off-by: Andrey Bondar <a.bondar@8devices.com>
Diffstat (limited to 'target/linux/ath79/nand/base-files')
| -rw-r--r-- | target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 355be93ead..60defa5f8b 100644 --- a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -9,6 +9,9 @@ board=$(board_name) case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in + 8dev,rambutan) + caldata_extract "caldata" 0x1000 0x800 + ;; netgear,wndr3700-v4|\ netgear,wndr4300|\ netgear,wndr4300sw|\ |