bcm27xx: remove linux 5.10 compatibility

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 328 deletions

diff --git a/target/linux/bcm27xx/patches-5.10/950-0438-dt-Add-a-camera-regulator-node-to-all-downstream-Pi-.patch b/target/linux/bcm27xx/patches-5.10/950-0438-dt-Add-a-camera-regulator-node-to-all-downstream-Pi-.patch
deleted file mode 100644
index ee53d7acaf..0000000000
--- a/target/linux/bcm27xx/patches-5.10/950-0438-dt-Add-a-camera-regulator-node-to-all-downstream-Pi-.patch
+++ /dev/null
@@ -1,328 +0,0 @@
-From 7782ca4dcb10a244ae476126220890a0843c439e Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.com>
-Date: Wed, 6 Jan 2021 17:28:57 +0000
-Subject: [PATCH] dt: Add a camera regulator node to all downstream Pi
- platforms
-
-The current firmware fixup of camera sensor overlays is not
-particularly nice, and it stops you being able to load them
-dynamically.
-It's also incompatible with creating a simple DT that can be
-loaded for both CAM1 and CAM0 on a CM as they would both
-try to claim the one GPIO.
-
-Almost all sensors have a hook of some form for a regulator, so
-it's relatively straightforward to convert them all to use a
-fixed regulator with GPIO control.
-
-Add a fixed regulator node for each platform with the GPIO
-correctly configured for the camera shutdown line. (The LED line
-is ignored).
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
----
- arch/arm/boot/dts/bcm2708-rpi-b-plus.dts          |  5 +++++
- arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts          |  5 +++++
- arch/arm/boot/dts/bcm2708-rpi-b.dts               |  5 +++++
- arch/arm/boot/dts/bcm2708-rpi-cm.dts              | 15 +++++++++++++++
- arch/arm/boot/dts/bcm2708-rpi-zero-w.dts          |  5 +++++
- arch/arm/boot/dts/bcm2708-rpi-zero.dts            |  5 +++++
- arch/arm/boot/dts/bcm2709-rpi-2-b.dts             |  5 +++++
- arch/arm/boot/dts/bcm2710-rpi-2-b.dts             |  5 +++++
- arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts        |  5 +++++
- arch/arm/boot/dts/bcm2710-rpi-3-b.dts             |  5 +++++
- arch/arm/boot/dts/bcm2710-rpi-cm3.dts             | 15 +++++++++++++++
- arch/arm/boot/dts/bcm2711-rpi-4-b.dts             |  5 +++++
- arch/arm/boot/dts/bcm2711-rpi-cm4.dts             |  8 ++++++++
- arch/arm/boot/dts/bcm283x-rpi-cam1-regulator.dtsi | 10 ++++++++++
- 14 files changed, 98 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm283x-rpi-cam1-regulator.dtsi
-
---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-@@ -5,6 +5,7 @@
- #include "bcm283x-rpi-smsc9514.dtsi"
- #include "bcm283x-rpi-csi1-2lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_28.dtsi"
-+#include "bcm283x-rpi-cam1-regulator.dtsi"
- 
- / {
- 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
-@@ -111,6 +112,10 @@
- 	pinctrl-0 = <&audio_pins>;
- };
- 
-+&cam1_reg {
-+	gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
-+};
-+
- / {
- 	__overrides__ {
- 		act_led_gpio = <&act_led>,"gpios:4";
---- a/arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts
-@@ -4,6 +4,7 @@
- #include "bcm2708-rpi.dtsi"
- #include "bcm283x-rpi-smsc9512.dtsi"
- #include "bcm283x-rpi-csi1-2lane.dtsi"
-+#include "bcm283x-rpi-cam1-regulator.dtsi"
- 
- / {
- 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
-@@ -118,6 +119,10 @@ i2c_csi_dsi: &i2c1 {
- 	pinctrl-0 = <&audio_pins>;
- };
- 
-+&cam1_reg {
-+	gpio = <&gpio 27 GPIO_ACTIVE_HIGH>;
-+};
-+
- / {
- 	__overrides__ {
- 		act_led_gpio = <&act_led>,"gpios:4";
---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
-@@ -5,6 +5,7 @@
- #include "bcm283x-rpi-smsc9512.dtsi"
- #include "bcm283x-rpi-csi1-2lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_28.dtsi"
-+#include "bcm283x-rpi-cam1-regulator.dtsi"
- 
- / {
- 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
-@@ -105,6 +106,10 @@
- 	pinctrl-0 = <&audio_pins>;
- };
- 
-+&cam1_reg {
-+	gpio = <&gpio 21 GPIO_ACTIVE_HIGH>;
-+};
-+
- / {
- 	__overrides__ {
- 		act_led_gpio = <&act_led>,"gpios:4";
---- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
-@@ -8,6 +8,21 @@
- / {
- 	compatible = "raspberrypi,compute-module", "brcm,bcm2835";
- 	model = "Raspberry Pi Compute Module";
-+
-+	cam1_reg: cam1_reg {
-+		compatible = "regulator-fixed";
-+		regulator-name = "cam1-regulator";
-+		gpio = <&gpio 2 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+		status = "disabled";
-+	};
-+	cam0_reg: cam0_reg {
-+		compatible = "regulator-fixed";
-+		regulator-name = "cam0-regulator";
-+		gpio = <&gpio 30 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+		status = "disabled";
-+	};
- };
- 
- &uart0 {
---- a/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
-@@ -5,6 +5,7 @@
- #include "bcm283x-rpi-csi1-2lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_28.dtsi"
- #include "bcm2708-rpi-bt.dtsi"
-+#include "bcm283x-rpi-cam1-regulator.dtsi"
- 
- / {
- 	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
-@@ -155,6 +156,10 @@
- 	brcm,disable-headphones = <1>;
- };
- 
-+&cam1_reg {
-+	gpio = <&gpio 44 GPIO_ACTIVE_HIGH>;
-+};
-+
- / {
- 	__overrides__ {
- 		act_led_gpio = <&act_led>,"gpios:4";
---- a/arch/arm/boot/dts/bcm2708-rpi-zero.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts
-@@ -4,6 +4,7 @@
- #include "bcm2708-rpi.dtsi"
- #include "bcm283x-rpi-csi1-2lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_28.dtsi"
-+#include "bcm283x-rpi-cam1-regulator.dtsi"
- 
- / {
- 	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
-@@ -109,6 +110,10 @@
- 	brcm,disable-headphones = <1>;
- };
- 
-+&cam1_reg {
-+	gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
-+};
-+
- / {
- 	__overrides__ {
- 		act_led_gpio = <&act_led>,"gpios:4";
---- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-@@ -5,6 +5,7 @@
- #include "bcm283x-rpi-smsc9514.dtsi"
- #include "bcm283x-rpi-csi1-2lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_28.dtsi"
-+#include "bcm283x-rpi-cam1-regulator.dtsi"
- 
- / {
- 	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
-@@ -111,6 +112,10 @@
- 	pinctrl-0 = <&audio_pins>;
- };
- 
-+&cam1_reg {
-+	gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
-+};
-+
- / {
- 	__overrides__ {
- 		act_led_gpio = <&act_led>,"gpios:4";
---- a/arch/arm/boot/dts/bcm2710-rpi-2-b.dts
-+++ b/arch/arm/boot/dts/bcm2710-rpi-2-b.dts
-@@ -5,6 +5,7 @@
- #include "bcm283x-rpi-smsc9514.dtsi"
- #include "bcm283x-rpi-csi1-2lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_28.dtsi"
-+#include "bcm283x-rpi-cam1-regulator.dtsi"
- 
- / {
- 	compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837";
-@@ -111,6 +112,10 @@
- 	pinctrl-0 = <&audio_pins>;
- };
- 
-+&cam1_reg {
-+	gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
-+};
-+
- / {
- 	__overrides__ {
- 		act_led_gpio = <&act_led>,"gpios:4";
---- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
-@@ -6,6 +6,7 @@
- #include "bcm283x-rpi-csi1-2lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_44.dtsi"
- #include "bcm271x-rpi-bt.dtsi"
-+#include "bcm283x-rpi-cam1-regulator.dtsi"
- 
- / {
- 	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
-@@ -176,6 +177,10 @@
- 	microchip,downshift-after = <2>;
- };
- 
-+&cam1_reg {
-+	gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
-+};
-+
- / {
- 	__overrides__ {
- 		act_led_gpio = <&act_led>,"gpios:4";
---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-@@ -6,6 +6,7 @@
- #include "bcm283x-rpi-csi1-2lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_44.dtsi"
- #include "bcm271x-rpi-bt.dtsi"
-+#include "bcm283x-rpi-cam1-regulator.dtsi"
- 
- / {
- 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
-@@ -185,6 +186,10 @@
- 	pinctrl-0 = <&audio_pins>;
- };
- 
-+&cam1_reg {
-+	gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
-+};
-+
- / {
- 	__overrides__ {
- 		act_led_gpio = <&act_led>,"gpios:4";
---- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
-+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
-@@ -8,6 +8,21 @@
- / {
- 	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
- 	model = "Raspberry Pi Compute Module 3";
-+
-+	cam1_reg: cam1_reg {
-+		compatible = "regulator-fixed";
-+		regulator-name = "cam1-regulator";
-+		gpio = <&gpio 2 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+		status = "disabled";
-+	};
-+	cam0_reg: cam0_reg {
-+		compatible = "regulator-fixed";
-+		regulator-name = "cam0-regulator";
-+		gpio = <&gpio 30 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+		status = "disabled";
-+	};
- };
- 
- &uart0 {
---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
-@@ -320,6 +320,7 @@
- #include "bcm2711-rpi.dtsi"
- #include "bcm283x-rpi-csi1-2lane.dtsi"
- #include "bcm283x-rpi-i2c0mux_0_44.dtsi"
-+#include "bcm283x-rpi-cam1-regulator.dtsi"
- 
- / {
- 	chosen {
-@@ -586,6 +587,10 @@
- 	pinctrl-0 = <&audio_pins>;
- };
- 
-+&cam1_reg {
-+	gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
-+};
-+
- / {
- 	__overrides__ {
- 		act_led_gpio = <&act_led>,"gpios:4";
---- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
-+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
-@@ -327,6 +327,14 @@
- 	};
- 
- 	/delete-node/ wifi-pwrseq;
-+
-+	cam0_reg: cam1_reg: cam1_reg {
-+		compatible = "regulator-fixed";
-+		regulator-name = "cam1-reg";
-+		gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+		status = "disabled";
-+	};
- };
- 
- &mmcnr {
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm283x-rpi-cam1-regulator.dtsi
-@@ -0,0 +1,10 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+/ {
-+	cam1_reg: cam1_reg {
-+		compatible = "regulator-fixed";
-+		regulator-name = "cam1-reg";
-+		enable-active-high;
-+		status = "disabled";
-+	};
-+};