bcm27xx: update to latest patches from RPi foundation

Also removes random module and switches to new bcm2711 thermal driver.
Boot tested on RPi 4B v1.1 4G.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 58 deletions

diff --git a/target/linux/bcm27xx/patches-5.4/950-0352-clk-bcm2835-Disable-v3d-clock.patch b/target/linux/bcm27xx/patches-5.4/950-0352-clk-bcm2835-Disable-v3d-clock.patch
deleted file mode 100644
index 160b39b9cd..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0352-clk-bcm2835-Disable-v3d-clock.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 6c37f43308f29a59bc67d4ed010f8fbbf076ec79 Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Tue, 3 Sep 2019 20:28:00 +0100
-Subject: [PATCH] clk-bcm2835: Disable v3d clock
-
-This is controlled by firmware, see clk-raspberrypi.c
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
----
- drivers/clk/bcm/clk-bcm2835.c | 30 ++++++++++++------------------
- 1 file changed, 12 insertions(+), 18 deletions(-)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1716,16 +1716,12 @@ static const struct bcm2835_clk_desc clk
- 		.hold_mask = CM_PLLA_HOLDCORE,
- 		.fixed_divider = 1,
- 		.flags = CLK_SET_RATE_PARENT),
--	[BCM2835_PLLA_PER]	= REGISTER_PLL_DIV(
--		SOC_ALL,
--		.name = "plla_per",
--		.source_pll = "plla",
--		.cm_reg = CM_PLLA,
--		.a2w_reg = A2W_PLLA_PER,
--		.load_mask = CM_PLLA_LOADPER,
--		.hold_mask = CM_PLLA_HOLDPER,
--		.fixed_divider = 1,
--		.flags = CLK_SET_RATE_PARENT),
-+
-+	/*
-+	 * PLLA_PER is used for gpu clocks. Controlled by firmware, see
-+	 * clk-raspberrypi.c.
-+	 */
-+
- 	[BCM2835_PLLA_DSI0]	= REGISTER_PLL_DIV(
- 		SOC_ALL,
- 		.name = "plla_dsi0",
-@@ -2003,14 +1999,12 @@ static const struct bcm2835_clk_desc clk
- 		.int_bits = 6,
- 		.frac_bits = 0,
- 		.tcnt_mux = 3),
--	[BCM2835_CLOCK_V3D]	= REGISTER_VPU_CLK(
--		SOC_ALL,
--		.name = "v3d",
--		.ctl_reg = CM_V3DCTL,
--		.div_reg = CM_V3DDIV,
--		.int_bits = 4,
--		.frac_bits = 8,
--		.tcnt_mux = 4),
-+
-+	/*
-+	 * CLOCK_V3D is used for v3d clock. Controlled by firmware, see
-+	 * clk-raspberrypi.c.
-+	 */
-+
- 	/*
- 	 * VPU clock.  This doesn't have an enable bit, since it drives
- 	 * the bus for everything else, and is special so it doesn't need