bcm27xx: remove obsolete kernel 5.4

With the upgrade to kernel 5.10 per default the old version is no
longer required to be in tree.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 102 deletions

diff --git a/target/linux/bcm27xx/patches-5.4/950-0503-dtoverlays-Add-overlay-to-enable-the-HEVC-V4L2-drive.patch b/target/linux/bcm27xx/patches-5.4/950-0503-dtoverlays-Add-overlay-to-enable-the-HEVC-V4L2-drive.patch
deleted file mode 100644
index ee92ada02f..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0503-dtoverlays-Add-overlay-to-enable-the-HEVC-V4L2-drive.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From b1d6499e00b6061ecc7061335199acf86f54d31a Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.com>
-Date: Fri, 13 Mar 2020 16:52:55 +0000
-Subject: [PATCH] dtoverlays: Add overlay to enable the HEVC V4L2
- driver
-
-This replaces the rpivid_mem register mapping driver.
-When the driver is complete, these DT changes should be
-merged into the base DT instead of being an overlay.
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
----
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             |  7 +++
- .../boot/dts/overlays/rpivid-v4l2-overlay.dts | 55 +++++++++++++++++++
- 4 files changed, 63 insertions(+), 2 deletions(-)
- create mode 100644 arch/arm/boot/dts/overlays/rpivid-v4l2-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -140,6 +140,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- 	rpi-proto.dtbo \
- 	rpi-sense.dtbo \
- 	rpi-tv.dtbo \
-+	rpivid-v4l2.dtbo \
- 	rra-digidac1-wm8741-audio.dtbo \
- 	sc16is750-i2c.dtbo \
- 	sc16is752-i2c.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -2064,6 +2064,13 @@ Load:   dtoverlay=rpi-tv
- Params: <None>
- 
- 
-+Name:   rpivid-v4l2
-+Info:   Load the V4L2 stateless video decoder driver for the HEVC block,
-+        disabling the memory mapped devices in the process.
-+Load:   dtoverlay=rpivid-v4l2
-+Params: <None>
-+
-+
- Name:   rra-digidac1-wm8741-audio
- Info:   Configures the Red Rocks Audio DigiDAC1 soundcard
- Load:   dtoverlay=rra-digidac1-wm8741-audio
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/rpivid-v4l2-overlay.dts
-@@ -0,0 +1,55 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+// Definitions for Raspberry Pi video decode engine
-+/dts-v1/;
-+/plugin/;
-+
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/{
-+	compatible = "brcm,bcm2711";
-+
-+	fragment@0 {
-+		target = <&scb>;
-+		__overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <2>;
-+			#size-cells = <1>;
-+			codec@7eb10000 {
-+				compatible = "raspberrypi,rpivid-vid-decoder";
-+				reg = <0x0 0x7eb10000 0x1000>,	/* INTC */
-+				      <0x0 0x7eb00000 0x10000>; /* HEVC */
-+				reg-names = "intc",
-+					    "hevc";
-+
-+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-+
-+				clocks = <&hevc_clk>;
-+				clock-names = "hevc";
-+
-+				hevc_clk: hevc_clk {
-+					compatible = "fixed-clock";
-+					#clock-cells = <0>;
-+					clock-frequency = <500000000>;
-+				};
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&scb>;
-+		__overlay__ {
-+			hevc-decoder@7eb00000 {
-+				status = "disabled";
-+			};
-+			rpivid-local-intc@7eb10000 {
-+				status = "disabled";
-+			};
-+			h264-decoder@7eb20000 {
-+				status = "disabled";
-+			};
-+			vp9-decoder@7eb30000 {
-+				status = "disabled";
-+			};
-+		};
-+	};
-+};