brcm2708: remove linux 4.1 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48766

1 files changed, 0 insertions, 134 deletions

diff --git a/target/linux/brcm2708/patches-4.1/0051-Added-support-to-reserve-enable-a-GPIO-pin-to-be-use.patch b/target/linux/brcm2708/patches-4.1/0051-Added-support-to-reserve-enable-a-GPIO-pin-to-be-use.patch
deleted file mode 100644
index e770e3ba8d..0000000000
--- a/target/linux/brcm2708/patches-4.1/0051-Added-support-to-reserve-enable-a-GPIO-pin-to-be-use.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From b7da35712d3642991ffa703e2082ce712ef38f29 Mon Sep 17 00:00:00 2001
-From: Timo Kokkonen <tjko@iki.fi>
-Date: Wed, 29 Oct 2014 23:30:30 -0700
-Subject: [PATCH 051/222] Added support to reserve/enable a GPIO pin to be used
- from pps-gpio module (LinuxPPS). Enable PPS modules in default config for
- RPi.
-
----
- arch/arm/mach-bcm2708/bcm2708.c | 27 +++++++++++++++++++++++++++
- arch/arm/mach-bcm2709/bcm2709.c | 27 +++++++++++++++++++++++++++
- 2 files changed, 54 insertions(+)
-
---- a/arch/arm/mach-bcm2708/bcm2708.c
-+++ b/arch/arm/mach-bcm2708/bcm2708.c
-@@ -37,6 +37,7 @@
- #include <linux/spi/spi.h>
- #include <linux/gpio/machine.h>
- #include <linux/w1-gpio.h>
-+#include <linux/pps-gpio.h>
- 
- #include <linux/version.h>
- #include <linux/clkdev.h>
-@@ -92,6 +93,7 @@ static unsigned reboot_part = 0;
- static unsigned w1_gpio_pin = W1_GPIO;
- static unsigned w1_gpio_pullup = W1_PULLUP;
- static bool vc_i2c_override = false;
-+static int pps_gpio_pin = -1;
- 
- static unsigned use_dt = 0;
- 
-@@ -325,6 +327,19 @@ static struct platform_device w1_device
- };
- #endif
- 
-+static struct pps_gpio_platform_data pps_gpio_info = {
-+	.assert_falling_edge = false,
-+	.capture_clear = false,
-+	.gpio_pin = -1,
-+	.gpio_label = "PPS",
-+};
-+
-+static struct platform_device pps_gpio_device = {
-+	.name = "pps-gpio",
-+	.id = PLATFORM_DEVID_NONE,
-+	.dev.platform_data = &pps_gpio_info,
-+};
-+
- static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
- 
- static struct platform_device bcm2708_fb_device = {
-@@ -860,6 +875,16 @@ void __init bcm2708_init(void)
- #ifdef CONFIG_BCM2708_GPIO
- 	bcm_register_device_dt(&bcm2708_gpio_device);
- #endif
-+
-+#if defined(CONFIG_PPS_CLIENT_GPIO) || defined(CONFIG_PPS_CLIENT_GPIO_MODULE)
-+	if (!use_dt && (pps_gpio_pin >= 0)) {
-+		pr_info("bcm2708: GPIO %d setup as pps-gpio device\n", pps_gpio_pin);
-+		pps_gpio_info.gpio_pin = pps_gpio_pin;
-+		pps_gpio_device.id = pps_gpio_pin;
-+		bcm_register_device(&pps_gpio_device);
-+	}
-+#endif
-+
- #if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
- 	w1_gpio_pdata.pin = w1_gpio_pin;
- 	w1_gpio_pdata.ext_pullup_enable_pin = w1_gpio_pullup;
-@@ -1116,3 +1141,5 @@ module_param(w1_gpio_pin, uint, 0644);
- module_param(w1_gpio_pullup, uint, 0644);
- module_param(vc_i2c_override, bool, 0644);
- MODULE_PARM_DESC(vc_i2c_override, "Allow the use of VC's I2C peripheral.");
-+module_param(pps_gpio_pin, int, 0644);
-+MODULE_PARM_DESC(pps_gpio_pin, "Set GPIO pin to reserve for PPS");
---- a/arch/arm/mach-bcm2709/bcm2709.c
-+++ b/arch/arm/mach-bcm2709/bcm2709.c
-@@ -37,6 +37,7 @@
- #include <linux/spi/spi.h>
- #include <linux/gpio/machine.h>
- #include <linux/w1-gpio.h>
-+#include <linux/pps-gpio.h>
- 
- #include <linux/version.h>
- #include <linux/clkdev.h>
-@@ -94,6 +95,7 @@ static unsigned reboot_part = 0;
- static unsigned w1_gpio_pin = W1_GPIO;
- static unsigned w1_gpio_pullup = W1_PULLUP;
- static bool vc_i2c_override = false;
-+static int pps_gpio_pin = -1;
- 
- static unsigned use_dt = 0;
- 
-@@ -335,6 +337,19 @@ static struct platform_device w1_device
- };
- #endif
- 
-+static struct pps_gpio_platform_data pps_gpio_info = {
-+	.assert_falling_edge = false,
-+	.capture_clear = false,
-+	.gpio_pin = -1,
-+	.gpio_label = "PPS",
-+};
-+
-+static struct platform_device pps_gpio_device = {
-+	.name = "pps-gpio",
-+	.id = PLATFORM_DEVID_NONE,
-+	.dev.platform_data = &pps_gpio_info,
-+};
-+
- static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
- 
- static struct platform_device bcm2708_fb_device = {
-@@ -880,6 +895,16 @@ void __init bcm2709_init(void)
- #ifdef CONFIG_BCM2708_GPIO
- 	bcm_register_device_dt(&bcm2708_gpio_device);
- #endif
-+
-+#if defined(CONFIG_PPS_CLIENT_GPIO) || defined(CONFIG_PPS_CLIENT_GPIO_MODULE)
-+	if (!use_dt && (pps_gpio_pin >= 0)) {
-+		pr_info("bcm2709: GPIO %d setup as pps-gpio device\n", pps_gpio_pin);
-+		pps_gpio_info.gpio_pin = pps_gpio_pin;
-+		pps_gpio_device.id = pps_gpio_pin;
-+		bcm_register_device(&pps_gpio_device);
-+	}
-+#endif
-+
- #if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
- 	w1_gpio_pdata.pin = w1_gpio_pin;
- 	w1_gpio_pdata.ext_pullup_enable_pin = w1_gpio_pullup;
-@@ -1284,3 +1309,5 @@ module_param(w1_gpio_pin, uint, 0644);
- module_param(w1_gpio_pullup, uint, 0644);
- module_param(vc_i2c_override, bool, 0644);
- MODULE_PARM_DESC(vc_i2c_override, "Allow the use of VC's I2C peripheral.");
-+module_param(pps_gpio_pin, int, 0644);
-+MODULE_PARM_DESC(pps_gpio_pin, "Set GPIO pin to reserve for PPS");