brcm2708: remove linux 4.4 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 42 deletions

diff --git a/target/linux/brcm2708/patches-4.4/0125-SDIO-overlay-add-bus_width-parameter.patch b/target/linux/brcm2708/patches-4.4/0125-SDIO-overlay-add-bus_width-parameter.patch
deleted file mode 100644
index 78bed04a49..0000000000
--- a/target/linux/brcm2708/patches-4.4/0125-SDIO-overlay-add-bus_width-parameter.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 597258492a6930e916cb16c09b3adf1508062a00 Mon Sep 17 00:00:00 2001
-From: Andrew Litt <ajlitt@splunge.net>
-Date: Mon, 11 Jan 2016 07:55:54 +0000
-Subject: [PATCH] SDIO-overlay: add bus_width parameter
-
-Allow setting of the SDIO bus width capability of the bcm2835-mmc
-host.  This is helpful when only a 1 bit wide bus is connected
-between host and device but both host and device advertise 4 bit
-mode.
----
- arch/arm/boot/dts/overlays/README           | 2 ++
- arch/arm/boot/dts/overlays/sdio-overlay.dts | 2 ++
- 2 files changed, 4 insertions(+)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -634,6 +634,8 @@ Params: overclock_50             Clock (
-         poll_once                Disable SDIO-device polling every second
-                                  (default on: polling once at boot-time)
- 
-+        bus_width                Set the SDIO host bus width (default 4 bits)
-+
- 
- Name:   sdtweak
- Info:   Tunes the bcm2835-sdhost SD/MMC driver
---- a/arch/arm/boot/dts/overlays/sdio-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts
-@@ -11,6 +11,7 @@
- 			pinctrl-names = "default";
- 			pinctrl-0 = <&sdio_pins>;
- 			non-removable;
-+			bus-width = <4>;
- 			status = "okay";
- 		};
- 	};
-@@ -28,5 +29,6 @@
- 
- 	__overrides__ {
- 		poll_once = <&sdio_mmc>,"non-removable?";
-+		bus_width = <&sdio_mmc>,"bus-width:0";
- 	};
- };