diff options
| author | Rafał Miłecki <rafal@milecki.pl> | 2017-03-22 21:09:00 +0100 |
|---|---|---|
| committer | Rafał Miłecki <rafal@milecki.pl> | 2017-03-24 08:06:35 +0100 |
| commit | fce21ae4ccfcee0c28fb18f5507e145fb0b02dec (patch) | |
| tree | 6c29b7c1f65945991d0cae13af012e6c14adc713 /target/linux/brcm2708/patches-4.9/0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch | |
| parent | 46e390322a58bdc632ee43fdf9d14115dac26e7a (diff) | |
| download | upstream-fce21ae4ccfcee0c28fb18f5507e145fb0b02dec.tar.gz upstream-fce21ae4ccfcee0c28fb18f5507e145fb0b02dec.tar.bz2 upstream-fce21ae4ccfcee0c28fb18f5507e145fb0b02dec.zip | |
brcm2708: rename all patches from raspberrypi git tree to use 950 prefix
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support
Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
Diffstat (limited to 'target/linux/brcm2708/patches-4.9/0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.9/0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch | 33 |
1 files changed, 0 insertions, 33 deletions
diff --git a/target/linux/brcm2708/patches-4.9/0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch b/target/linux/brcm2708/patches-4.9/0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch deleted file mode 100644 index 062e6e0256..0000000000 --- a/target/linux/brcm2708/patches-4.9/0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 3e2cb84235e904f0c127d34705852ba7893ec9ae Mon Sep 17 00:00:00 2001 -From: Matthias Reichl <hias@horus.com> -Date: Sun, 22 Jan 2017 12:49:36 +0100 -Subject: [PATCH] BCM270x DT: expose 3.3V and 5V system rails - -Signed-off-by: Matthias Reichl <hias@horus.com> ---- - arch/arm/boot/dts/bcm270x.dtsi | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -138,4 +138,20 @@ - status = "disabled"; - }; - }; -+ -+ vdd_5v0_reg: fixedregulator_5v0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "5v0"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+ -+ vdd_3v3_reg: fixedregulator_3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; - }; |