brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 118 deletions

diff --git a/target/linux/brcm63xx/dts/bcm6318-comtrend-ar-5315u.dts b/target/linux/brcm63xx/dts/bcm6318-comtrend-ar-5315u.dts
deleted file mode 100644
index d1085e7eed..0000000000
--- a/target/linux/brcm63xx/dts/bcm6318-comtrend-ar-5315u.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-/dts-v1/;
-
-#include "bcm6318.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Comtrend AR-5315u";
-	compatible = "comtrend,ar-5315u", "brcm,bcm6318";
-
-	chosen {
-		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-		stdout-path = "serial0:115200n8";
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		wps {
-			label = "wps";
-			gpios = <&pinctrl 3 1>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&pinctrl 33 1>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wps_green {
-			label = "AR-5315u:green:wps";
-			gpios = <&pinctrl 0 1>;
-		};
-		power_green {
-			label = "AR-5315u:green:power";
-			gpios = <&pinctrl 1 1>;
-			default-state = "on";
-		};
-		usb_green {
-			label = "AR-5315u:green:usb";
-			gpios = <&pinctrl 2 1>;
-		};
-		inet_green {
-			label = "AR-5315u:green:inet";
-			gpios = <&pinctrl 8 1>;
-		};
-		inet_red {
-			label = "AR-5315u:red:inet";
-			gpios = <&pinctrl 9 1>;
-		};
-		dsl_green {
-			label = "AR-5315u:green:dsl";
-			gpios = <&pinctrl 10 1>;
-		};
-		power_red {
-			label = "AR-5315u:red:power";
-			gpios = <&pinctrl 11 1>;
-		};
-	};
-};
-
-&hsspi {
-	status = "ok";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <62500000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-		reg = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			cfe@0 {
-				reg = <0x000000 0x010000>;
-				label = "cfe";
-				read-only;
-			};
-
-			linux@10000 {
-				reg = <0x010000 0xfe0000>;
-				label = "linux";
-				compatible = "brcm,bcm963xx-imagetag";
-			};
-
-			nvram@ff0000 {
-				reg = <0xff0000 0x010000>;
-				label = "nvram";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
-		     &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
-};
-
-&uart0 {
-	status = "ok";
-};