ipq806x: add support for TP-Link Talon AD7200

Device hardware: https://deviwiki.com/wiki/TP-LINK_AD7200_(Talon)

The Talon AD7200 is basically an Archer C2600 with a third PCIe lane
and an 802.11ad radio. It looks like the Archers C2600/5400 but the
housing is slightly larger.

Specifications
--------------

  - IPQ8064 dual-core 1400MHz
  - QCA9988 2.4GHz WiFi
  - QCA9990 5GHz WiFi
  - QCA9500 60GHz WiFi
  - 32MB SPI Flash
  - 512MiB RAM
  - 5 GBit Ports (QCA8337)

Installation
------------

Installation is possible from the OEM web interface.
Sysupgrade is possible.
TFTP recovery is possible.
  - Image: AD7200_1.0_tp_recovery.bin

Notes
  - This will be the first 802.11ad device supported by mainline.

Signed-off-by: Gary Cooper <gaco@bitmessage.de>

4 files changed, 13 insertions, 0 deletions

diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index fed821663a..a03a056d83 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -39,6 +39,15 @@ netgear,r7800)
 	ucidef_set_led_switch "wan" "WAN" "white:wan" "switch0" "0x20"
 	ucidef_set_led_ide "esata" "eSATA" "white:esata"
 	;;
+tplink,ad7200)
+	ucidef_set_led_usbport "usb1" "USB 1" "blue:usb_1" "usb1-port1" "usb2-port1"
+	ucidef_set_led_usbport "usb2" "USB 2" "blue:usb_3" "usb3-port1" "usb4-port1"
+	ucidef_set_led_switch "wan" "wan" "blue:wan" "switch0" "0x02"
+	ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x3c"
+	ucidef_set_led_wlan "wlan2g" "wlan2g" "blue:wlan2g" "phy2tpt"
+	ucidef_set_led_wlan "wlan5g" "wlan5g" "blue:wlan5g" "phy1tpt"
+	ucidef_set_led_netdev "wlan60g" "wlan60g" "blue:wlan60g" "wlan0"
+	;;
 tplink,c2600)
 	ucidef_set_led_usbport "usb1" "USB 1" "white:usb_2" "usb1-port1" "usb2-port1"
 	ucidef_set_led_usbport "usb2" "USB 2" "white:usb_4" "usb3-port1" "usb4-port1"
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 10b2ec0148..fbf56c5e0c 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -51,6 +51,7 @@ nec,wg2600hp3)
 		"2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0"
 	;;
 netgear,r7800 |\
+tplink,ad7200 |\
 tplink,c2600)
 	ucidef_add_switch "switch0" \
 		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8788fc92f6..3befc40630 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -35,6 +35,7 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +1)
 		;;
+	tplink,ad7200 |\
 	tplink,c2600)
 		caldata_extract "radio" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1)
@@ -74,6 +75,7 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +2)
 		;;
+	tplink,ad7200 |\
 	tplink,c2600)
 		caldata_extract "radio" 0x5000 0x2f20
 		ath10k_patch_mac $(mtd_get_mac_binary default-mac 0x8)
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index f5d6c5d55d..4dc612492c 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -43,6 +43,7 @@ platform_do_upgrade() {
 	linksys,ea8500)
 		platform_do_upgrade_linksys "$1"
 		;;
+	tplink,ad7200 |\
 	tplink,c2600)
 		PART_NAME="os-image:rootfs"
 		MTD_CONFIG_ARGS="-s 0x200000"