kernel-5.4: bump to 5.4.102 and refresh patches

5.4.102 backported a lot of stuff that our WireGuard backport already
did, in addition to other patches we had, so those patches were
removed from that part of the series. In the process other patches were
refreshed or reworked to account for upstream changes.

This commit involved `update_kernel.sh -v -u 5.4`.

Cc: John Audia <graysky@archlinux.us>
Cc: David Bauer <mail@david-bauer.net>
Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

4 files changed, 10 insertions, 10 deletions

diff --git a/target/linux/ipq806x/patches-5.4/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch b/target/linux/ipq806x/patches-5.4/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch
index 605eb7d07b..1bd44fd5a0 100644
--- a/target/linux/ipq806x/patches-5.4/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch
+++ b/target/linux/ipq806x/patches-5.4/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch
@@ -20,7 +20,7 @@ Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
 
 --- a/drivers/watchdog/qcom-wdt.c
 +++ b/drivers/watchdog/qcom-wdt.c
-@@ -40,6 +40,11 @@ static const u32 reg_offset_data_kpss[]
+@@ -39,6 +39,11 @@ static const u32 reg_offset_data_kpss[]
  	[WDT_BITE_TIME] = 0x14,
  };
  
@@ -32,7 +32,7 @@ Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
  struct qcom_wdt {
  	struct watchdog_device	wdd;
  	unsigned long		rate;
-@@ -179,19 +184,29 @@ static void qcom_clk_disable_unprepare(v
+@@ -168,19 +173,29 @@ static void qcom_clk_disable_unprepare(v
  	clk_disable_unprepare(data);
  }
  
@@ -65,7 +65,7 @@ Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
  		dev_err(dev, "Unsupported QCOM WDT module\n");
  		return -ENODEV;
  	}
-@@ -247,7 +262,7 @@ static int qcom_wdt_probe(struct platfor
+@@ -236,7 +251,7 @@ static int qcom_wdt_probe(struct platfor
  
  	/* check if there is pretimeout support */
  	irq = platform_get_irq_optional(pdev, 0);
@@ -74,7 +74,7 @@ Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
  		ret = devm_request_irq(dev, irq, qcom_wdt_isr,
  				       IRQF_TRIGGER_RISING,
  				       "wdt_bark", &wdt->wdd);
-@@ -267,7 +282,7 @@ static int qcom_wdt_probe(struct platfor
+@@ -256,7 +271,7 @@ static int qcom_wdt_probe(struct platfor
  	wdt->wdd.min_timeout = 1;
  	wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
  	wdt->wdd.parent = dev;
@@ -83,7 +83,7 @@ Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
  
  	if (readl(wdt_addr(wdt, WDT_STS)) & 1)
  		wdt->wdd.bootstatus = WDIOF_CARDRESET;
-@@ -311,9 +326,9 @@ static int __maybe_unused qcom_wdt_resum
+@@ -300,9 +315,9 @@ static int __maybe_unused qcom_wdt_resum
  static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume);
  
  static const struct of_device_id qcom_wdt_of_table[] = {
diff --git a/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch b/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
index 95531508b6..ecfcd74693 100644
--- a/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
+++ b/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
@@ -161,7 +161,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  
  	/* enable PCIe clocks and resets */
  	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
-@@ -406,36 +393,6 @@ static int qcom_pcie_init_2_1_0(struct q
+@@ -408,36 +395,6 @@ static int qcom_pcie_init_2_1_0(struct q
  	val |= PHY_REFCLK_SSP_EN;
  	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
  
@@ -198,7 +198,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  	/* wait for clock acquisition */
  	usleep_range(1000, 1500);
  
-@@ -448,15 +405,19 @@ static int qcom_pcie_init_2_1_0(struct q
+@@ -450,15 +407,19 @@ static int qcom_pcie_init_2_1_0(struct q
  
  	return 0;
  
diff --git a/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch b/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch
index c3d61f164c..be334d72e9 100644
--- a/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch
+++ b/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch
@@ -26,7 +26,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  		writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
  			       PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
  			       PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
-@@ -1328,6 +1329,7 @@ err_pm_runtime_put:
+@@ -1330,6 +1331,7 @@ err_pm_runtime_put:
  static const struct of_device_id qcom_pcie_match[] = {
  	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
  	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
diff --git a/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch b/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch
index 02ac7460e8..5440b2f7f8 100644
--- a/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch
+++ b/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch
@@ -49,7 +49,7 @@ Backported with light changes:
  };
  
  #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
-@@ -397,6 +401,11 @@ static int qcom_pcie_init_2_1_0(struct q
+@@ -399,6 +403,11 @@ static int qcom_pcie_init_2_1_0(struct q
  	/* wait for clock acquisition */
  	usleep_range(1000, 1500);
  
@@ -61,7 +61,7 @@ Backported with light changes:
  
  	/* Set the Max TLP size to 2K, instead of using default of 4K */
  	writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K,
-@@ -1261,6 +1270,10 @@ static int qcom_pcie_probe(struct platfo
+@@ -1263,6 +1272,10 @@ static int qcom_pcie_probe(struct platfo
  		goto err_pm_runtime_put;
  	}