kirkwood: copy files to kernel 5.10

Copy config and patches to kernel 5.10.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>

15 files changed, 1327 insertions, 0 deletions

diff --git a/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch b/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch
new file mode 100644
index 0000000000..52caee7b40
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch
@@ -0,0 +1,485 @@
+From efa968c18abab78c5e0c40a853caf286c3629a59 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Tue, 17 Mar 2020 21:28:01 +0100
+Subject: [PATCH v3] ARM: dts: kirkwood: Add Check Point L-50 board
+
+This patch adds dts for the Check Point L-50 from 600/1100 series
+routers.
+
+Specification:
+-CPU: Marvell Kirkwood 88F6821 1200MHz
+-RAM: 512MB
+-Flash: NAND 512MB
+-WiFi: mPCIe card based on Atheros AR9287 b/g/n
+-WAN: 1 Gigabit Port (Marvell 88E1116R PHY)
+-LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+3))
+-USB: 2x USB2.0
+-Express card slot
+-SD card slot
+-Serial console: RJ-45 115200 8n1
+-Unsupported DSL
+
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+Changes in v3:
+- fix typo and code style issues pointed by OpenWrt guys
+Changes in v2:
+- none
+
+ arch/arm/boot/dts/Makefile          |   1 +
+ arch/arm/boot/dts/kirkwood-l-50.dts | 438 ++++++++++++++++++++++++++++
+ 2 files changed, 439 insertions(+)
+ create mode 100644 arch/arm/boot/dts/kirkwood-l-50.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -270,6 +270,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-iomega_ix2_200.dtb \
+ 	kirkwood-is2.dtb \
+ 	kirkwood-km_kirkwood.dtb \
++	kirkwood-l-50.dtb \
+ 	kirkwood-laplug.dtb \
+ 	kirkwood-linkstation-lsqvl.dtb \
+ 	kirkwood-linkstation-lsvl.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-l-50.dts
+@@ -0,0 +1,438 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Check Point L-50 Board Description
++ * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++
++/ {
++	model = "Check Point L-50";
++	compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++	memory {
++		device_type = "memory";
++		reg = <0x00000000 0x20000000>;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,115200n8";
++		stdout-path = &uart0;
++	};
++
++	ocp@f1000000 {
++		pinctrl: pin-controller@10000 {
++			pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
++			pinctrl-names = "default";
++
++			pmx_sysrst: pmx-sysrst {
++				marvell,pins = "mpp6";
++				marvell,function = "sysrst";
++			};
++
++			pmx_button29: pmx_button29 {
++				marvell,pins = "mpp29";
++				marvell,function = "gpio";
++			};
++
++			pmx_led38: pmx_led38 {
++				marvell,pins = "mpp38";
++				marvell,function = "gpio";
++			};
++
++			pmx_sdio_cd: pmx-sdio-cd {
++				marvell,pins = "mpp46";
++				marvell,function = "gpio";
++			};
++		};
++
++		serial@12000 {
++			status = "okay";
++		};
++
++		mvsdio@90000 {
++			status = "okay";
++			cd-gpios = <&gpio1 14 9>;
++		};
++
++		i2c@11000 {
++			status = "okay";
++			clock-frequency = <400000>;
++
++			gpio2: gpio-expander@20{
++				#gpio-cells = <2>;
++				#interrupt-cells = <2>;
++				compatible = "semtech,sx1505q";
++				reg = <0x20>;
++
++				gpio-controller;
++			};
++
++			/* Three GPIOs from 0x21 exp. are undescribed in dts:
++			 * 1: DSL module reset (active low)
++			 * 5: mPCIE reset (active low)
++			 * 6: Express card reset (active low)
++			 */
++			gpio3: gpio-expander@21{
++				#gpio-cells = <2>;
++				#interrupt-cells = <2>;
++				compatible = "semtech,sx1505q";
++				reg = <0x21>;
++
++				gpio-controller;
++			};
++
++			rtc@30 {
++				compatible = "s35390a";
++				reg = <0x30>;
++			};
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		status_green {
++			label = "l-50:green:status";
++			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
++		};
++
++		status_red {
++			label = "l-50:red:status";
++			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
++		};
++
++		wifi {
++			label = "l-50:green:wifi";
++			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "phy0tpt";
++		};
++
++		internet_green {
++			label = "l-50:green:internet";
++			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
++		};
++
++		internet_red {
++			label = "l-50:red:internet";
++			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
++		};
++
++		usb1_green {
++			label = "l-50:green:usb1";
++			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "usbport";
++			trigger-sources = <&hub_port3>;
++		};
++
++		usb1_red {
++			label = "l-50:red:usb1";
++			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
++		};
++
++		usb2_green {
++			label = "l-50:green:usb2";
++			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "usbport";
++			trigger-sources = <&hub_port1>;
++		};
++
++		usb2_red {
++			label = "l-50:red:usb2";
++			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	usb2_pwr {
++		compatible = "regulator-fixed";
++		regulator-name = "usb2_pwr";
++
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
++		regulator-always-on;
++	};
++
++	usb1_pwr {
++		compatible = "regulator-fixed";
++		regulator-name = "usb1_pwr";
++
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
++		regulator-always-on;
++	};
++
++	mpcie_pwr {
++		compatible = "regulator-fixed";
++		regulator-name = "mpcie_pwr";
++
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
++		enable-active-high;
++		regulator-always-on;
++	};
++
++	express_card_pwr {
++		compatible = "regulator-fixed";
++		regulator-name = "express_card_pwr";
++
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
++		enable-active-high;
++		regulator-always-on;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		factory_defaults {
++			label = "factory_defaults";
++			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++	};
++};
++
++&mdio {
++	status = "okay";
++
++	ethphy8: ethernet-phy@8 {
++		reg = <0x08>;
++	};
++
++	switch0: switch@10 {
++		compatible = "marvell,mv88e6085";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x10>;
++		dsa,member = <0 0>;
++
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			port@0 {
++				reg = <0>;
++				label = "lan5";
++			};
++
++			port@1 {
++			       reg = <1>;
++			       label = "lan1";
++			};
++
++			port@2 {
++			       reg = <2>;
++			       label = "lan6";
++			};
++
++			port@3 {
++			       reg = <3>;
++			       label = "lan2";
++			};
++
++			port@4 {
++				reg = <4>;
++				label = "lan7";
++			};
++
++			switch0port5: port@5 {
++				reg = <5>;
++				phy-mode = "rgmii-txid";
++				link = <&switch1port5>;
++				fixed-link {
++					speed = <1000>;
++					full-duplex;
++				};
++			};
++
++			port@6 {
++				reg = <6>;
++				label = "cpu";
++				phy-mode = "rgmii-id";
++				ethernet = <&eth1port>;
++				fixed-link {
++					speed = <1000>;
++					full-duplex;
++				};
++			};
++		};
++	};
++
++	switch@11 {
++		compatible = "marvell,mv88e6085";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x11>;
++		dsa,member = <0 1>;
++
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			port@0 {
++				reg = <0>;
++				label = "lan3";
++			};
++
++			port@1 {
++			       reg = <1>;
++			       label = "lan8";
++			};
++
++			port@2 {
++			       reg = <2>;
++			       label = "lan4";
++			};
++
++			port@3 {
++			       reg = <3>;
++			       label = "dmz";
++			};
++
++			switch1port5: port@5 {
++				reg = <5>;
++				phy-mode = "rgmii-txid";
++				link = <&switch0port5>;
++				fixed-link {
++					speed = <1000>;
++					full-duplex;
++				};
++			};
++
++			port@6 {
++				reg = <6>;
++				label = "dsl";
++				fixed-link {
++					speed = <100>;
++					full-duplex;
++				};
++			};
++		};
++	};
++};
++
++&eth0 {
++	status = "okay";
++	ethernet0-port@0 {
++		phy-handle = <&ethphy8>;
++	};
++};
++
++&eth1 {
++	status = "okay";
++	ethernet1-port@0 {
++		speed = <1000>;
++		duplex = <1>;
++	};
++};
++
++&nand {
++	status = "okay";
++	pinctrl-0 = <&pmx_nand>;
++	pinctrl-names = "default";
++
++	partition@0 {
++		label = "u-boot";
++		reg = <0x00000000 0x000c0000>;
++	};
++
++	partition@a0000 {
++		label = "bootldr-env";
++		reg = <0x000c0000 0x00040000>;
++	};
++
++	partition@100000 {
++		label = "kernel-1";
++		reg = <0x00100000 0x00800000>;
++	};
++
++	partition@900000 {
++		label = "rootfs-1";
++		reg = <0x00900000 0x07100000>;
++	};
++
++	partition@7a00000 {
++		label = "kernel-2";
++		reg = <0x07a00000 0x00800000>;
++	};
++
++	partition@8200000 {
++		label = "rootfs-2";
++		reg = <0x08200000 0x07100000>;
++	};
++
++	partition@f300000 {
++		label = "default_sw";
++		reg = <0x0f300000 0x07900000>;
++	};
++
++	partition@16c00000 {
++		label = "logs";
++		reg = <0x16c00000 0x01800000>;
++	};
++
++	partition@18400000 {
++		label = "preset_cfg";
++		reg = <0x18400000 0x00100000>;
++	};
++
++	partition@18500000 {
++		label = "adsl";
++		reg = <0x18500000 0x00100000>;
++	};
++
++	partition@18600000 {
++		label = "storage";
++		reg = <0x18600000 0x07a00000>;
++	};
++};
++
++&rtc {
++	status = "disabled";
++};
++
++&pciec {
++	status = "okay";
++};
++
++&pcie0 {
++	status = "okay";
++};
++
++&sata_phy0 {
++	status = "disabled";
++};
++
++&sata_phy1 {
++	status = "disabled";
++};
++
++&usb0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	status = "okay";
++
++	port@1 {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <1>;
++		#trigger-source-cells = <0>;
++
++		hub_port1: port@1 {
++			reg = <1>;
++			#trigger-source-cells = <0>;
++		};
++
++		hub_port3: port@3 {
++			reg = <3>;
++			#trigger-source-cells = <0>;
++		};
++	};
++};
diff --git a/target/linux/kirkwood/patches-5.10/100-ib62x0.patch b/target/linux/kirkwood/patches-5.10/100-ib62x0.patch
new file mode 100644
index 0000000000..0637c24b63
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/100-ib62x0.patch
@@ -0,0 +1,53 @@
+--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
++++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
+@@ -6,7 +6,14 @@
+ 
+ / {
+ 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
+-	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++	compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++	aliases {
++		led-boot = &led_green_os;
++		led-failsafe = &led_red_os;
++		led-running = &led_green_os;
++		led-upgrade = &led_red_os;
++	};
+ 
+ 	memory {
+ 		device_type = "memory";
+@@ -81,12 +88,12 @@
+ 			     &pmx_led_usb_transfer>;
+ 		pinctrl-names = "default";
+ 
+-		green-os {
++		led_green_os: green-os {
+ 			label = "ib62x0:green:os";
+ 			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+-			default-state = "keep";
++			default-state = "on";
+ 		};
+-		red-os {
++		led_red_os: red-os {
+ 			label = "ib62x0:red:os";
+ 			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ 		};
+@@ -118,13 +125,13 @@
+ 	};
+ 
+ 	partition@100000 {
+-		label = "uImage";
+-		reg = <0x0100000 0x600000>;
++		label = "second stage u-boot";
++		reg = <0x100000 0x200000>;
+ 	};
+ 
+-	partition@700000 {
+-		label = "root";
+-		reg = <0x0700000 0xf900000>;
++	partition@200000 {
++		label = "ubi";
++		reg = <0x200000 0xfe00000>;
+ 	};
+ 
+ };
diff --git a/target/linux/kirkwood/patches-5.10/101-iconnect.patch b/target/linux/kirkwood/patches-5.10/101-iconnect.patch
new file mode 100644
index 0000000000..935e2dfcf5
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/101-iconnect.patch
@@ -0,0 +1,80 @@
+--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
+@@ -8,6 +8,13 @@
+ 	model = "Iomega Iconnect";
+ 	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ 
++	aliases {
++		led-boot = &led_power_blue;
++		led-failsafe = &led_power_red;
++		led-running = &led_power_blue;
++		led-upgrade = &led_power_red;
++	};
++
+ 	memory {
+ 		device_type = "memory";
+ 		reg = <0x00000000 0x10000000>;
+@@ -16,8 +23,6 @@
+ 	chosen {
+ 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+ 		stdout-path = &uart0;
+-		linux,initrd-start = <0x4500040>;
+-		linux,initrd-end   = <0x4800000>;
+ 	};
+ 
+ 	ocp@f1000000 {
+@@ -89,12 +94,12 @@
+ 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ 			default-state = "on";
+ 		};
+-		power-blue {
++		led_power_blue: power-blue {
+ 			label = "power:blue";
+ 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+-			default-state = "keep";
++			default-state = "on";
+ 		};
+-		power-red {
++		led_power_red: power-red {
+ 			label = "power:red";
+ 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ 		};
+@@ -146,28 +151,23 @@
+ 	status = "okay";
+ 
+ 	partition@0 {
+-		label = "uboot";
+-		reg = <0x0000000 0xc0000>;
++		label = "u-boot";
++		reg = <0x0000000 0xe0000>;
+ 	};
+ 
+-	partition@a0000 {
+-		label = "env";
+-		reg = <0xa0000 0x20000>;
++	partition@e0000 {
++		label = "u-boot environment";
++		reg = <0xe0000 0x100000>;
+ 	};
+ 
+ 	partition@100000 {
+-		label = "zImage";
+-		reg = <0x100000 0x300000>;
+-	};
+-
+-	partition@540000 {
+-		label = "initrd";
+-		reg = <0x540000 0x300000>;
++		label = "second stage u-boot";
++		reg = <0x100000 0x200000>;
+ 	};
+ 
+-	partition@980000 {
+-		label = "boot";
+-		reg = <0x980000 0x1f400000>;
++	partition@200000 {
++		label = "ubi";
++		reg = <0x200000 0x1fe00000>;
+ 	};
+ };
+ 
diff --git a/target/linux/kirkwood/patches-5.10/102-dockstar.patch b/target/linux/kirkwood/patches-5.10/102-dockstar.patch
new file mode 100644
index 0000000000..127f84962c
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/102-dockstar.patch
@@ -0,0 +1,62 @@
+--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
++++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
+@@ -8,6 +8,13 @@
+ 	model = "Seagate FreeAgent Dockstar";
+ 	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ 
++	aliases {
++		led-boot = &led_health;
++		led-failsafe = &led_fault;
++		led-running = &led_health;
++		led-upgrade = &led_fault;
++	};
++
+ 	memory {
+ 		device_type = "memory";
+ 		reg = <0x00000000 0x8000000>;
+@@ -42,12 +49,12 @@
+ 		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+ 		pinctrl-names = "default";
+ 
+-		health {
++		led_health: health {
+ 			label = "status:green:health";
+ 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+-			default-state = "keep";
++			default-state = "on";
+ 		};
+-		fault {
++		led_fault: fault {
+ 			label = "status:orange:fault";
+ 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ 		};
+@@ -78,18 +85,22 @@
+ 
+ 	partition@0 {
+ 		label = "u-boot";
+-		reg = <0x0000000 0x100000>;
+-		read-only;
++		reg = <0x0000000 0xe0000>;
++	};
++
++	partition@e0000 {
++		label = "u-boot environment";
++		reg = <0xe0000 0x100000>;
+ 	};
+ 
+ 	partition@100000 {
+-		label = "uImage";
+-		reg = <0x0100000 0x400000>;
++		label = "second stage u-boot";
++		reg = <0x100000 0x200000>;
+ 	};
+ 
+-	partition@500000 {
+-		label = "data";
+-		reg = <0x0500000 0xfb00000>;
++	partition@200000 {
++		label = "ubi";
++		reg = <0x200000 0xfe00000>;
+ 	};
+ };
+ 
diff --git a/target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch
new file mode 100644
index 0000000000..9313b4bc3e
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch
@@ -0,0 +1,67 @@
+--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
++++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+@@ -8,6 +8,13 @@
+ 	model = "Iomega StorCenter ix2-200";
+ 	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ 
++	aliases {
++		led-boot = &led_power;
++		led-failsafe = &led_health;
++		led-running = &led_power;
++		led-upgrade = &led_health;
++	};
++
+ 	memory {
+ 		device_type = "memory";
+ 		reg = <0x00000000 0x10000000>;
+@@ -127,16 +134,16 @@
+ 			      &pmx_led_rebuild &pmx_led_health >;
+ 		pinctrl-names = "default";
+ 
+-		power_led {
++		led_power: power_led {
+ 			label = "status:white:power_led";
+ 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+-			default-state = "keep";
++			default-state = "on";
+ 		};
+ 		rebuild_led {
+ 			label = "status:white:rebuild_led";
+ 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ 		};
+-		health_led {
++		led_health: health_led {
+ 			label = "status:red:health_led";
+ 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ 		};
+@@ -186,18 +193,18 @@
+ 	};
+ 
+ 	partition@a0000 {
+-		label = "env";
++		label = "u-boot environment";
+ 		reg = <0xa0000 0x20000>;
+ 		read-only;
+ 	};
+ 
+ 	partition@100000 {
+-		label = "uImage";
++		label = "kernel";
+ 		reg = <0x100000 0x300000>;
+ 	};
+ 
+ 	partition@400000 {
+-		label = "rootfs";
++		label = "ubi";
+ 		reg = <0x400000 0x1C00000>;
+ 	};
+ };
+@@ -211,7 +218,7 @@
+ };
+ 
+ &eth0 {
+-	status = "okay";
++	status = "disabled";
+ 	ethernet0-port@0 {
+ 		speed = <1000>;
+ 		duplex = <1>;
diff --git a/target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch b/target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch
new file mode 100644
index 0000000000..0d97ad14a2
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch
@@ -0,0 +1,52 @@
+--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+@@ -24,6 +24,10 @@
+ 	};
+ 
+ 	aliases {
++		led-boot = &led_white_health;
++		led-failsafe = &led_white_health;
++		led-running = &led_white_health;
++		led-upgrade = &led_white_health;
+ 		serial0 = &uart0;
+ 	};
+ 
+@@ -56,9 +60,10 @@
+ 		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
+ 		pinctrl-names = "default";
+ 
+-		white-health {
++		led_white_health: white-health {
+ 			label = "viper:white:health";
+ 			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++			default-state = "on";
+ 		};
+ 
+ 		white-pulse {
+@@ -114,22 +119,22 @@
+ 		};
+ 
+ 		partition@200000 {
+-			label = "kernel";
++			label = "kernel1";
+ 			reg = <0x200000 0x2A0000>;
+ 		};
+ 
+ 		partition@4a0000 {
+-			label = "rootfs";
++			label = "rootfs1";
+ 			reg = <0x4A0000 0x1760000>;
+ 		};
+ 
+ 		partition@1c00000 {
+-			label = "alt_kernel";
++			label = "kernel2";
+ 			reg = <0x1C00000 0x2A0000>;
+ 		};
+ 
+ 		partition@1ea0000 {
+-			label = "alt_rootfs";
++			label = "rootfs2";
+ 			reg = <0x1EA0000 0x1760000>;
+ 		};
+ 
diff --git a/target/linux/kirkwood/patches-5.10/106-goflexnet.patch b/target/linux/kirkwood/patches-5.10/106-goflexnet.patch
new file mode 100644
index 0000000000..82cf90841e
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/106-goflexnet.patch
@@ -0,0 +1,53 @@
+--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
++++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
+@@ -8,6 +8,13 @@
+ 	model = "Seagate GoFlex Net";
+ 	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ 
++	aliases {
++		led-boot = &led_health;
++		led-failsafe = &led_fault;
++		led-running = &led_health;
++		led-upgrade = &led_fault;
++	};
++
+ 	memory {
+ 		device_type = "memory";
+ 		reg = <0x00000000 0x8000000>;
+@@ -85,12 +92,12 @@
+ 			    >;
+ 		pinctrl-names = "default";
+ 
+-		health {
++		led_health: health {
+ 			label = "status:green:health";
+ 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+-			default-state = "keep";
++			default-state = "on";
+ 		};
+-		fault {
++		led_fault: fault {
+ 			label = "status:orange:fault";
+ 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ 		};
+@@ -159,18 +166,8 @@
+ 	};
+ 
+ 	partition@100000 {
+-		label = "uImage";
+-		reg = <0x0100000 0x400000>;
+-	};
+-
+-	partition@500000 {
+-		label = "pogoplug";
+-		reg = <0x0500000 0x2000000>;
+-	};
+-
+-	partition@2500000 {
+-		label = "root";
+-		reg = <0x02500000 0xd800000>;
++		label = "ubi";
++		reg = <0x0100000 0x0ff00000>;
+ 	};
+ };
+ 
diff --git a/target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch
new file mode 100644
index 0000000000..df654033fd
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch
@@ -0,0 +1,48 @@
+--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
++++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+@@ -112,40 +112,16 @@
+ 
+ 	partition@0 {
+ 		label = "uboot";
+-		reg = <0x0000000 0x0100000>;
++		reg = <0x0000000 0x00c0000>;
+ 		read-only;
+ 	};
+ 	partition@100000 {
+ 		label = "uboot_env";
+-		reg = <0x0100000 0x0080000>;
++		reg = <0x00c0000 0x0080000>;
+ 	};
+-	partition@180000 {
+-		label = "key_store";
+-		reg = <0x0180000 0x0080000>;
+-	};
+-	partition@200000 {
+-		label = "info";
+-		reg = <0x0200000 0x0080000>;
+-	};
+-	partition@280000 {
+-		label = "etc";
+-		reg = <0x0280000 0x0a00000>;
+-	};
+-	partition@c80000 {
+-		label = "kernel_1";
+-		reg = <0x0c80000 0x0a00000>;
+-	};
+-	partition@1680000 {
+-		label = "rootfs1";
+-		reg = <0x1680000 0x2fc0000>;
+-	};
+-	partition@4640000 {
+-		label = "kernel_2";
+-		reg = <0x4640000 0x0a00000>;
+-	};
+-	partition@5040000 {
+-		label = "rootfs2";
+-		reg = <0x5040000 0x2fc0000>;
++	partition@140000 {
++		label = "ubi";
++		reg = <0x0140000 0x7ec0000>;
+ 	};
+ };
+ 
diff --git a/target/linux/kirkwood/patches-5.10/107-03-nsa325.patch b/target/linux/kirkwood/patches-5.10/107-03-nsa325.patch
new file mode 100644
index 0000000000..374c0895a9
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/107-03-nsa325.patch
@@ -0,0 +1,54 @@
+--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
++++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
+@@ -15,6 +15,13 @@
+ 	model = "ZyXEL NSA325";
+ 	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+ 
++	aliases {
++		led-boot = &led_green_sys;
++		led-failsafe = &led_orange_sys;
++		led-running = &led_green_sys;
++		led-upgrade = &led_orange_sys;
++	};
++
+ 	memory {
+ 		device_type = "memory";
+ 		reg = <0x00000000 0x20000000>;
+@@ -162,17 +169,19 @@
+ 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+ 		pinctrl-names = "default";
+ 
+-		green-sys {
++		led_green_sys: green-sys {
+ 			label = "nsa325:green:sys";
+ 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++			default-state = "on";
+ 		};
+-		orange-sys {
++		led_orange_sys: orange-sys {
+ 			label = "nsa325:orange:sys";
+ 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ 		};
+ 		green-hdd1 {
+ 			label = "nsa325:green:hdd1";
+ 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "ata1";
+ 		};
+ 		red-hdd1 {
+ 			label = "nsa325:red:hdd1";
+@@ -181,6 +190,7 @@
+ 		green-hdd2 {
+ 			label = "nsa325:green:hdd2";
+ 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "ata2";
+ 		};
+ 		red-hdd2 {
+ 			label = "nsa325:red:hdd2";
+@@ -189,6 +199,7 @@
+ 		green-usb {
+ 			label = "nsa325:green:usb";
+ 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "usb-host";
+ 		};
+ 		green-copy {
+ 			label = "nsa325:green:copy";
diff --git a/target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch
new file mode 100644
index 0000000000..4273eb9af1
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch
@@ -0,0 +1,87 @@
+--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
++++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+@@ -18,12 +18,20 @@
+ 	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+ 		     "marvell,kirkwood";
+ 
++	aliases {
++		led-boot = &led_health;
++		led-failsafe = &led_fault;
++		led-running = &led_health;
++		led-upgrade = &led_fault;
++	};
++
+ 	memory {
+ 		device_type = "memory";
+ 		reg = <0x00000000 0x08000000>;
+ 	};
+ 
+ 	chosen {
++		bootargs = "console=ttyS0,115200";
+ 		stdout-path = "uart0:115200n8";
+ 	};
+ 
+@@ -37,8 +45,8 @@
+ 		eject {
+ 			debounce-interval = <50>;
+ 			wakeup-source;
+-			linux,code = <KEY_EJECTCD>;
+-			label = "Eject Button";
++			linux,code = <KEY_RESTART>;
++			label = "Reset";
+ 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ 		};
+ 	};
+@@ -48,12 +56,12 @@
+ 		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+ 		pinctrl-names = "default";
+ 
+-		health {
++		led_health: health {
+ 			label = "pogoplugv4:green:health";
+ 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ 			default-state = "on";
+ 		};
+-		fault {
++		led_fault: fault {
+ 			label = "pogoplugv4:red:fault";
+ 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ 		};
+@@ -137,29 +145,19 @@
+ 		#size-cells = <1>;
+ 
+ 		partition@0 {
+-			label = "u-boot";
+-			reg = <0x00000000 0x200000>;
++			label = "uboot";
++			reg = <0x00000000 0x1c0000>;
+ 			read-only;
+ 		};
+ 
+-		partition@200000 {
+-			label = "uImage";
+-			reg = <0x00200000 0x300000>;
+-		};
+-
+-		partition@500000 {
+-			label = "uImage2";
+-			reg = <0x00500000 0x300000>;
+-		};
+-
+-		partition@800000 {
+-			label = "failsafe";
+-			reg = <0x00800000 0x800000>;
++		partition@1c0000 {
++			label = "uboot_env";
++			reg = <0x001c0000 0x40000>;
+ 		};
+ 
+-		partition@1000000 {
+-			label = "root";
+-			reg = <0x01000000 0x7000000>;
++		partition@200000 {
++			label = "ubi";
++			reg = <0x00200000 0x7e00000>;
+ 		};
+ 	};
+ };
diff --git a/target/linux/kirkwood/patches-5.10/110-pogo_e02.patch b/target/linux/kirkwood/patches-5.10/110-pogo_e02.patch
new file mode 100644
index 0000000000..fc384d3521
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/110-pogo_e02.patch
@@ -0,0 +1,68 @@
+--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+@@ -20,6 +20,13 @@
+ 	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+ 		     "marvell,kirkwood";
+ 
++	aliases {
++		led-boot = &led_health;
++		led-failsafe = &led_fault;
++		led-running = &led_health;
++		led-upgrade = &led_fault;
++	};
++
+ 	memory {
+ 		device_type = "memory";
+ 		reg = <0x00000000 0x10000000>;
+@@ -33,12 +40,12 @@
+ 	gpio-leds {
+ 		compatible = "gpio-leds";
+ 
+-		health {
++		led_health: health {
+ 			label = "pogo_e02:green:health";
+ 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+-			default-state = "keep";
++			default-state = "on";
+ 		};
+-		fault {
++		led_fault: fault {
+ 			label = "pogo_e02:orange:fault";
+ 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ 		};
+@@ -95,24 +102,24 @@
+ 	status = "okay";
+ 
+ 	partition@0 {
+-		label = "u-boot";
+-		reg = <0x0000000 0x100000>;
++		label = "uboot";
++		reg = <0x0 0xe0000>;
+ 		read-only;
+ 	};
+ 
+-	partition@100000 {
+-		label = "uImage";
+-		reg = <0x0100000 0x400000>;
++	partition@e0000 {
++		label = "uboot_env";
++		reg = <0xe0000 0x20000>;
+ 	};
+ 
+-	partition@500000 {
+-		label = "pogoplug";
+-		reg = <0x0500000 0x2000000>;
++	partition@100000 {
++		label = "second_stage_uboot";
++		reg = <0x100000 0x100000>;
+ 	};
+ 
+-	partition@2500000 {
+-		label = "root";
+-		reg = <0x02500000 0x5b00000>;
++	partition@200000 {
++		label = "ubi";
++		reg = <0x200000 0x7e00000>;
+ 	};
+ };
+ 
diff --git a/target/linux/kirkwood/patches-5.10/111-l-50.patch b/target/linux/kirkwood/patches-5.10/111-l-50.patch
new file mode 100644
index 0000000000..bc933cb610
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/111-l-50.patch
@@ -0,0 +1,47 @@
+--- a/arch/arm/boot/dts/kirkwood-l-50.dts
++++ b/arch/arm/boot/dts/kirkwood-l-50.dts
+@@ -18,6 +18,13 @@
+ 		reg = <0x00000000 0x20000000>;
+ 	};
+ 
++	aliases {
++		led-boot = &led_status_green;
++		led-failsafe = &led_status_red;
++		led-running = &led_status_green;
++		led-upgrade = &led_status_red;
++	};
++
+ 	chosen {
+ 		bootargs = "console=ttyS0,115200n8";
+ 		stdout-path = &uart0;
+@@ -95,12 +102,12 @@
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+-		status_green {
++		led_status_green: status_green {
+ 			label = "l-50:green:status";
+ 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ 		};
+ 
+-		status_red {
++		led_status_red: status_red {
+ 			label = "l-50:red:status";
+ 			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ 		};
+@@ -349,13 +356,8 @@
+ 	};
+ 
+ 	partition@100000 {
+-		label = "kernel-1";
+-		reg = <0x00100000 0x00800000>;
+-	};
+-
+-	partition@900000 {
+-		label = "rootfs-1";
+-		reg = <0x00900000 0x07100000>;
++		label = "ubi";
++		reg = <0x00100000 0x07900000>;
+ 	};
+ 
+ 	partition@7a00000 {
diff --git a/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch
new file mode 100644
index 0000000000..c1645367a4
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/mach-mvebu/Kconfig
++++ b/arch/arm/mach-mvebu/Kconfig
+@@ -119,6 +119,7 @@ config MACH_DOVE
+ config MACH_KIRKWOOD
+ 	bool "Marvell Kirkwood boards"
+ 	depends on ARCH_MULTI_V5
++	select ARCH_WANT_LIBATA_LEDS
+ 	select CPU_FEROCEON
+ 	select GPIOLIB
+ 	select KIRKWOOD_CLK
diff --git a/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch
new file mode 100644
index 0000000000..b7e7f50271
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch
@@ -0,0 +1,62 @@
+The WRT1900AC among other Linksys routers uses a dual-firmware layout.
+Dynamically rename the active partition to "ubi".
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+--- a/drivers/mtd/parsers/ofpart.c
++++ b/drivers/mtd/parsers/ofpart.c
+@@ -21,6 +21,8 @@ static bool node_has_compatible(struct d
+ 	return of_get_property(pp, "compatible", NULL);
+ }
+ 
++static int mangled_rootblock;
++
+ static int parse_fixed_partitions(struct mtd_info *master,
+ 				  const struct mtd_partition **pparts,
+ 				  struct mtd_part_parser_data *data)
+@@ -28,6 +30,7 @@ static int parse_fixed_partitions(struct
+ 	struct mtd_partition *parts;
+ 	struct device_node *mtd_node;
+ 	struct device_node *ofpart_node;
++	const char *owrtpart = "ubi";
+ 	const char *partname;
+ 	struct device_node *pp;
+ 	int nr_parts, i, ret = 0;
+@@ -106,9 +109,15 @@ static int parse_fixed_partitions(struct
+ 		parts[i].size = of_read_number(reg + a_cells, s_cells);
+ 		parts[i].of_node = pp;
+ 
+-		partname = of_get_property(pp, "label", &len);
+-		if (!partname)
+-			partname = of_get_property(pp, "name", &len);
++		if (mangled_rootblock && (i == mangled_rootblock)) {
++			partname = owrtpart;
++		} else {
++			partname = of_get_property(pp, "label", &len);
++
++			if (!partname)
++				partname = of_get_property(pp, "name", &len);
++		}
++
+ 		parts[i].name = partname;
+ 
+ 		if (of_get_property(pp, "read-only", &len))
+@@ -215,6 +224,18 @@ static int __init ofpart_parser_init(voi
+ 	return 0;
+ }
+ 
++static int __init active_root(char *str)
++{
++	get_option(&str, &mangled_rootblock);
++
++	if (!mangled_rootblock)
++		return 1;
++
++	return 1;
++}
++
++__setup("mangled_rootblock=", active_root);
++
+ static void __exit ofpart_parser_exit(void)
+ {
+ 	deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch b/target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch
new file mode 100644
index 0000000000..e04a28206a
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch
@@ -0,0 +1,99 @@
+--- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
++++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
+@@ -17,6 +17,13 @@
+ 	compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
+ 		     "marvell,kirkwood";
+ 
++	aliases {
++		led-boot = &led_status_amber;
++		led-failsafe = &led_status_amber;
++		led-running = &led_status_blue;
++		led-upgrade = &led_status_amber;
++	};
++
+ 	memory { /* 128 MB */
+ 		device_type = "memory";
+ 		reg = <0x00000000 0x8000000>;
+@@ -36,14 +43,14 @@
+ 		compatible = "gpio-keys";
+ 
+ 		reset {
+-			label = "Reset";
+-			linux,code = <KEY_POWER>;
++			label = "Reset Button";
++			linux,code = <KEY_RESTART>;
+ 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ 		};
+ 
+-		button {
+-			label = "Power";
+-			linux,code = <KEY_SLEEP>;
++		power {
++			label = "Power Button";
++			linux,code = <KEY_POWER>;
+ 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ 		};
+ 	};
+@@ -51,11 +58,27 @@
+ 	gpio-leds {
+ 		compatible = "gpio-leds";
+ 
+-		blue-power {
++		led_power_blue: power_blue {
+ 			label = "nas220:blue:power";
+ 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ 			linux,default-trigger = "default-on";
+ 		};
++
++		disk_blue {
++			label = "nas220:blue:disk";
++			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "disk-activity";
++		};
++
++		led_status_blue: status_blue {
++			label = "nas220:blue:status";
++			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
++		};
++
++		led_status_amber: status_amber {
++			label = "nas220:amber:status";
++			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
++		};
+ 	};
+ 
+ 	regulators {
+@@ -153,6 +176,33 @@
+ 
+ &nand {
+ 	status = "okay";
++
++	partitions {
++		compatible = "fixed-partitions";
++
++		partition@0 {
++			label = "uboot";
++			reg = <0x0 0xa0000>;
++			read-only;
++		};
++
++		partition@a0000 {
++			label = "uboot-env";
++			reg = <0xa0000 0x10000>;
++			read-only;
++		};
++
++		partition@b0000 {
++			label = "reserved";
++			reg = <0xb0000 0x10000>;
++			read-only;
++		};
++
++		partition@c0000 {
++			label = "ubi";
++			reg = <0xc0000 0x1e80000>;
++		};
++	};
+ };
+ 
+ &mdio {