diff options
| author | Mathias Kresin <dev@kresin.me> | 2018-01-06 17:30:38 +0100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-01-10 08:08:53 +0100 |
| commit | d3fd38637febad007bcc692bd79d5af08a17689d (patch) | |
| tree | f6aa0b689a07605a4366057c6a3b44cbb4a115a6 /target/linux/lantiq/base-files | |
| parent | e4936a957d1af8b905107396b1a9057101e63abb (diff) | |
| download | upstream-d3fd38637febad007bcc692bd79d5af08a17689d.tar.gz upstream-d3fd38637febad007bcc692bd79d5af08a17689d.tar.bz2 upstream-d3fd38637febad007bcc692bd79d5af08a17689d.zip | |
lantiq: create ATM/PTM interfaces with dsl as netdev name
Renaming an atm etherbride using 'ip link' (via hotplug) is racy since the
original netdev might disappear before br2684ctl has finished appling it's
setting:
local2.notice br2684ctl[1667]: Interface "nas0" created sucessfully
local2.notice br2684ctl[1667]: Communicating over ATM 0.8.35, encapsulation: LLC
kern.info kernel: dsl0: renamed from nas0
kern.err kernel: br2684:br2684_regvcc: tried to attach to non-existent device
local2.err br2684ctl[1667]: Could not configure interface:No such device or address
By passing the final used netdev name to br2684ctl_wrap another race
condition workaround will be enabled again.
Change the lantiq ptm driver to create a netdev with the name dsl as well.
Albeit the rename via 'ip link' works fine so far, using a different
approach for ptm then atm could be confusing.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/lantiq/base-files')
| -rwxr-xr-x | target/linux/lantiq/base-files/etc/board.d/02_network | 2 | ||||
| -rw-r--r-- | target/linux/lantiq/base-files/etc/uci-defaults/02_migrate_xdsl_iface | 12 |
2 files changed, 13 insertions, 1 deletions
diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network index efe631c99e..ca974b071e 100755 --- a/target/linux/lantiq/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/base-files/etc/board.d/02_network @@ -229,7 +229,7 @@ buffalo,wbmr-300hpd) esac ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \ - ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" + ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl" if lantiq_is_vdsl_system; then ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode" diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_migrate_xdsl_iface b/target/linux/lantiq/base-files/etc/uci-defaults/02_migrate_xdsl_iface index 292d407c30..3b0313d1aa 100644 --- a/target/linux/lantiq/base-files/etc/uci-defaults/02_migrate_xdsl_iface +++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_migrate_xdsl_iface @@ -29,6 +29,17 @@ rename_xdsl_ifname() IFNAME_CHANGED=1 } +add_atm_bridge_nameprefix() +{ + local cfg="$1" + + config_get nameprefix "$cfg" nameprefix + [ -z "$nameprefix" ] || return + + uci set network.${cfg}.nameprefix="dsl" + IFNAME_CHANGED=1 +} + migrate_network_xdsl_ifname() { rename_xdsl_ifname network "$1" ifname @@ -42,6 +53,7 @@ migrate_led_xdsl_ifname() config_load network config_foreach migrate_network_xdsl_ifname +config_foreach add_atm_bridge_nameprefix atm-bridge [ "$IFNAME_CHANGED" = "1" ] && uci commit network |