kernel: bump 4.14 to 4.14.149

Refreshed all patches.

Altered patches:
- 820-sec-support-layerscape.patch

Compile-tested on: ar71xx, brcm2708, cns3xxx, imx6, layerscape, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

1 files changed, 17 insertions, 17 deletions

diff --git a/target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape.patch b/target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape.patch
index db1a18fc18..60d0c889e5 100644
--- a/target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape.patch
+++ b/target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape.patch
@@ -131,7 +131,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  };
  
  /**
-@@ -495,13 +545,20 @@ static void esdhc_clock_enable(struct sd
+@@ -500,13 +550,20 @@ static void esdhc_clock_enable(struct sd
  	}
  }
  
@@ -152,7 +152,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	u32 temp;
  
  	host->mmc->actual_clock = 0;
-@@ -515,27 +572,14 @@ static void esdhc_of_set_clock(struct sd
+@@ -520,27 +577,14 @@ static void esdhc_of_set_clock(struct sd
  	if (esdhc->vendor_ver < VENDOR_V_23)
  		pre_div = 2;
  
@@ -187,7 +187,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  
  	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
  	temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
-@@ -548,9 +592,30 @@ static void esdhc_of_set_clock(struct sd
+@@ -553,9 +597,30 @@ static void esdhc_of_set_clock(struct sd
  	while (host->max_clk / pre_div / div > clock && div < 16)
  		div++;
  
@@ -218,7 +218,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	pre_div >>= 1;
  	div--;
  
-@@ -560,6 +625,29 @@ static void esdhc_of_set_clock(struct sd
+@@ -565,6 +630,29 @@ static void esdhc_of_set_clock(struct sd
  		| (pre_div << ESDHC_PREDIV_SHIFT));
  	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
  
@@ -248,7 +248,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	/* Wait max 20 ms */
  	timeout = ktime_add_ms(ktime_get(), 20);
  	while (1) {
-@@ -575,6 +663,7 @@ static void esdhc_of_set_clock(struct sd
+@@ -580,6 +668,7 @@ static void esdhc_of_set_clock(struct sd
  		udelay(10);
  	}
  
@@ -256,7 +256,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	temp |= ESDHC_CLOCK_SDCLKEN;
  	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
  }
-@@ -603,6 +692,8 @@ static void esdhc_pltfm_set_bus_width(st
+@@ -608,6 +697,8 @@ static void esdhc_pltfm_set_bus_width(st
  
  static void esdhc_reset(struct sdhci_host *host, u8 mask)
  {
@@ -265,7 +265,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	u32 val;
  
  	sdhci_reset(host, mask);
-@@ -617,6 +708,12 @@ static void esdhc_reset(struct sdhci_hos
+@@ -622,6 +713,12 @@ static void esdhc_reset(struct sdhci_hos
  		val = sdhci_readl(host, ESDHC_TBCTL);
  		val &= ~ESDHC_TB_EN;
  		sdhci_writel(host, val, ESDHC_TBCTL);
@@ -278,7 +278,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	}
  }
  
-@@ -628,6 +725,7 @@ static void esdhc_reset(struct sdhci_hos
+@@ -633,6 +730,7 @@ static void esdhc_reset(struct sdhci_hos
  static const struct of_device_id scfg_device_ids[] = {
  	{ .compatible = "fsl,t1040-scfg", },
  	{ .compatible = "fsl,ls1012a-scfg", },
@@ -286,7 +286,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	{ .compatible = "fsl,ls1046a-scfg", },
  	{}
  };
-@@ -690,23 +788,91 @@ static int esdhc_signal_voltage_switch(s
+@@ -695,23 +793,91 @@ static int esdhc_signal_voltage_switch(s
  	}
  }
  
@@ -383,7 +383,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  }
  
  #ifdef CONFIG_PM_SLEEP
-@@ -755,7 +921,7 @@ static const struct sdhci_ops sdhci_esdh
+@@ -760,7 +926,7 @@ static const struct sdhci_ops sdhci_esdh
  	.adma_workaround = esdhc_of_adma_workaround,
  	.set_bus_width = esdhc_pltfm_set_bus_width,
  	.reset = esdhc_reset,
@@ -392,7 +392,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  };
  
  static const struct sdhci_ops sdhci_esdhc_le_ops = {
-@@ -772,7 +938,7 @@ static const struct sdhci_ops sdhci_esdh
+@@ -777,7 +943,7 @@ static const struct sdhci_ops sdhci_esdh
  	.adma_workaround = esdhc_of_adma_workaround,
  	.set_bus_width = esdhc_pltfm_set_bus_width,
  	.reset = esdhc_reset,
@@ -401,7 +401,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  };
  
  static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
-@@ -798,8 +964,20 @@ static struct soc_device_attribute soc_i
+@@ -803,8 +969,20 @@ static struct soc_device_attribute soc_i
  	{ },
  };
  
@@ -422,7 +422,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	struct sdhci_pltfm_host *pltfm_host;
  	struct sdhci_esdhc *esdhc;
  	struct device_node *np;
-@@ -819,6 +997,24 @@ static void esdhc_init(struct platform_d
+@@ -824,6 +1002,24 @@ static void esdhc_init(struct platform_d
  	else
  		esdhc->quirk_incorrect_hostver = false;
  
@@ -447,7 +447,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	np = pdev->dev.of_node;
  	clk = of_clk_get(np, 0);
  	if (!IS_ERR(clk)) {
-@@ -846,6 +1042,12 @@ static void esdhc_init(struct platform_d
+@@ -851,6 +1047,12 @@ static void esdhc_init(struct platform_d
  	}
  }
  
@@ -460,7 +460,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  static int sdhci_esdhc_probe(struct platform_device *pdev)
  {
  	struct sdhci_host *host;
-@@ -869,6 +1071,7 @@ static int sdhci_esdhc_probe(struct plat
+@@ -874,6 +1076,7 @@ static int sdhci_esdhc_probe(struct plat
  	host->mmc_host_ops.start_signal_voltage_switch =
  		esdhc_signal_voltage_switch;
  	host->mmc_host_ops.execute_tuning = esdhc_execute_tuning;
@@ -468,7 +468,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	host->tuning_delay = 1;
  
  	esdhc_init(pdev, host);
-@@ -877,6 +1080,11 @@ static int sdhci_esdhc_probe(struct plat
+@@ -882,6 +1085,11 @@ static int sdhci_esdhc_probe(struct plat
  
  	pltfm_host = sdhci_priv(host);
  	esdhc = sdhci_pltfm_priv(pltfm_host);
@@ -480,7 +480,7 @@ Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
  	if (esdhc->vendor_ver == VENDOR_V_22)
  		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
  
-@@ -923,14 +1131,6 @@ static int sdhci_esdhc_probe(struct plat
+@@ -928,14 +1136,6 @@ static int sdhci_esdhc_probe(struct plat
  	return ret;
  }