oxnas: bring in new oxnas target

Reboot the oxnas target based on Linux 4.14 by rebasing our support on
top of the now-existing upstream kernel support.
This commit brings oxnas support to the level of v4.17 having upstream
drivers for Ethernet, Serial and NAND flash.
Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the
new platform code and device-tree.
Re-introduce base-files from old oxnas target which works for now but
needs further clean-up towards generic board support.

Functional issues:
 * PCIe won't come up (hence no USB3 on Shuttle KD20)
 * I2C bus of Akitio myCloud device is likely not to work (missing
   debounce support in new pinctrl driver)

Code-style issues:
 * plla/pllb needs further cleanup -- currently their users or writing
   into the syscon regmap after acquireling the clk instead of using
   defined clk_*_*() functions to setup multipliers and dividors.
 * PCIe phy needs its own little driver.
 * SATA driver is a monster and should be split into an mfd having
   a raidctrl regmap, sata controller, sata ports and sata phy.

Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

7 files changed, 205 insertions, 0 deletions

diff --git a/target/linux/oxnas/base-files/etc/board.d/01_leds b/target/linux/oxnas/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..5d665093f6
--- /dev/null
+++ b/target/linux/oxnas/base-files/etc/board.d/01_leds
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board=$(board_name)
+board_config_update
+
+case $board in
+	akitio)
+		ucidef_set_led_default "status" "status" "akitio:red:status" "0"
+		;;
+	stg212)
+		ucidef_set_led_default "power" "power" "zyxel:blue:status" "1"
+		ucidef_set_led_usbdev "usb" "USB" "zyxel:orange:copy" "1-1"
+		;;
+	kd20)
+		ucidef_set_led_default "power" "power" "kd20:blue:status" "1"
+		;;
+	pogoplug-pro | pogoplug-v3)
+		ucidef_set_led_default "power" "power" "pogoplug:blue:internal" "1"
+		;;
+
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/oxnas/base-files/etc/board.d/02_network b/target/linux/oxnas/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..7ecaed51bf
--- /dev/null
+++ b/target/linux/oxnas/base-files/etc/board.d/02_network
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+. /lib/oxnas.sh
+
+board_config_update
+
+lan_mac=""
+
+case "$(board_name)" in
+	kd20)
+		lan_mac="$(legacy_boot_mac_adr)"
+		;;
+esac
+
+ucidef_set_interface_lan "eth0" "dhcp"
+[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/oxnas/base-files/etc/diag.sh b/target/linux/oxnas/base-files/etc/diag.sh
new file mode 100644
index 0000000000..fd3bc3b336
--- /dev/null
+++ b/target/linux/oxnas/base-files/etc/diag.sh
@@ -0,0 +1,41 @@
+#!/bin/sh
+# Copyright (C) 2009-2013 OpenWrt.org
+
+. /lib/functions.sh
+. /lib/functions/leds.sh
+
+get_status_led() {
+	case $(board_name) in
+	akitio)
+		status_led="akitio:red:status"
+		;;
+	stg212)
+		status_led="zyxel:blue:status"
+		;;
+	kd20)
+		status_led="kd20:blue:status"
+		;;
+	pogoplug-pro | pogoplug-v3)
+		status_led="pogoplug:blue:internal"
+		;;
+	esac
+}
+
+set_state() {
+	get_status_led
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_blink_failsafe
+		;;
+	preinit_regular)
+		status_led_blink_preinit_regular
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}
diff --git a/target/linux/oxnas/base-files/init.d/set-irq-affinity b/target/linux/oxnas/base-files/init.d/set-irq-affinity
new file mode 100755
index 0000000000..8ab066ff4c
--- /dev/null
+++ b/target/linux/oxnas/base-files/init.d/set-irq-affinity
@@ -0,0 +1,22 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+get_irq() {
+	local name="$1"
+	grep -m 1 "$name" /proc/interrupts | cut -d: -f1 | sed 's, *,,'
+}
+
+set_irq_affinity() {
+	local name="$1"
+	local val="$2"
+	local irq="$(get_irq "$name")"
+	[ -n "$irq" ] || return
+	echo "$val" > "/proc/irq/$irq/smp_affinity"
+}
+
+start() {
+	set_irq_affinity ehci_hcd 2
+	set_irq_affinity xhci_hcd 2
+	set_irq_affinity sata 2
+}
diff --git a/target/linux/oxnas/base-files/lib/oxnas.sh b/target/linux/oxnas/base-files/lib/oxnas.sh
new file mode 100755
index 0000000000..671dd05fa2
--- /dev/null
+++ b/target/linux/oxnas/base-files/lib/oxnas.sh
@@ -0,0 +1,66 @@
+#!/bin/sh
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+
+OXNAS_BOARD_NAME=
+OXNAS_MODEL=
+
+bootloader_cmdline_var() {
+	local param
+	local pval
+	for arg in $(cat /proc/device-tree/chosen/bootloader-args); do
+		param="$(echo $arg | cut -d'=' -f 1)"
+		pval="$(echo $arg | cut -d'=' -f 2-)"
+
+		if [ "$param" = "$1" ]; then
+			echo "$pval"
+		fi
+	done
+}
+
+legacy_boot_mac_adr() {
+	local macstr
+	local oIFS
+	macstr="$(bootloader_cmdline_var mac_adr)"
+	oIFS="$IFS"
+	IFS=","
+	set -- $macstr
+	printf "%02x:%02x:%02x:%02x:%02x:%02x" $1 $2 $3 $4 $5 $6
+	IFS="$oIFS"
+}
+
+oxnas_board_detect() {
+	local machine
+	local name
+
+	machine=$(cat /proc/device-tree/model)
+
+	case "$machine" in
+	*"Akitio MyCloud mini"*)
+		name="akitio"
+		;;
+	*"MitraStar Technology Corp. STG-212"*)
+		name="stg212"
+		;;
+	*"Shuttle KD20"*)
+		name="kd20"
+		;;
+	*"Pogoplug Pro"*)
+		name="pogoplug-pro"
+		;;
+	*"Pogoplug V3"*)
+		name="pogoplug-v3"
+		;;
+	esac
+
+	[ -z "$name" ] && name="unknown"
+
+	[ -z "$OXNAS_BOARD_NAME" ] && OXNAS_BOARD_NAME="$name"
+	[ -z "$OXNAS_MODEL" ] && OXNAS_MODEL="$machine"
+
+	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
+
+	echo "$OXNAS_BOARD_NAME" > /tmp/sysinfo/board_name
+	echo "$OXNAS_MODEL" > /tmp/sysinfo/model
+}
diff --git a/target/linux/oxnas/base-files/lib/preinit/01_preinit_do_oxnas.sh b/target/linux/oxnas/base-files/lib/preinit/01_preinit_do_oxnas.sh
new file mode 100644
index 0000000000..ca7bce1054
--- /dev/null
+++ b/target/linux/oxnas/base-files/lib/preinit/01_preinit_do_oxnas.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+do_oxnas() {
+	. /lib/oxnas.sh
+
+	oxnas_board_detect
+}
+
+boot_hook_add preinit_main do_oxnas
diff --git a/target/linux/oxnas/base-files/lib/upgrade/platform.sh b/target/linux/oxnas/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000000..059d75f9a9
--- /dev/null
+++ b/target/linux/oxnas/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	local board=$(board_name)
+
+	[ "$ARGC" -gt 1 ] && return 1
+
+	nand_do_platform_check $board $1
+	return $?
+}
+
+platform_do_upgrade() {
+	nand_do_upgrade $1
+}