ramips: update device tree source files

Use the GPIO dt-bindings macros and add compatible strings in the
ramips device tree source files.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 140 deletions

diff --git a/target/linux/ramips/dts/HC5XXX.dtsi b/target/linux/ramips/dts/HC5XXX.dtsi
deleted file mode 100644
index 3bea77e233..0000000000
--- a/target/linux/ramips/dts/HC5XXX.dtsi
+++ /dev/null
@@ -1,140 +0,0 @@
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 12 1>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		usbpower {
-			gpio-export,name = "usbpower";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 13 0>;
-		};
-	};
-};
-
-&sysc {
-	ralink,gpiomux = "i2c", "jtag";
-	ralink,uartmux = "gpio";
-	ralink,wdtmux = <1>;
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-		};
-
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-		};
-
-		partition@50000 {
-			label = "firmware";
-			reg = <0x50000 0xf80000>;
-		};
-
-		partition@fd0000 {
-			label = "hwf_config";
-			reg = <0xfd0000 0x10000>;
-		};
-
-		bdinfo: partition@fe0000 {
-			label = "bdinfo";
-			reg = <0xfe0000 0x10000>;
-		};
-
-		partition@ff0000 {
-			label = "backup";
-			reg = <0xff0000 0x10000>;
-		};
-	};
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};
-
-&ethernet {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ephy_pins>;
-	mtd-mac-address = <&factory 0x4>;
-	mediatek,portmap = "wllll";
-};
-
-&sdhci {
-	status = "okay";
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "uartf", "wled", "nd_sd";
-			ralink,function = "gpio";
-		};
-
-		pa {
-			ralink,group = "pa";
-			ralink,function = "pa";
-		};
-	};
-};