ramips: move partitions into partition table node

Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>

1 files changed, 37 insertions, 33 deletions

diff --git a/target/linux/ramips/dts/MR-102N.dts b/target/linux/ramips/dts/MR-102N.dts
index 66b0f4ee85..c278b9cb91 100644
--- a/target/linux/ramips/dts/MR-102N.dts
+++ b/target/linux/ramips/dts/MR-102N.dts
@@ -18,40 +18,44 @@
 		reg = <0x1f000000 0x800000>;
 		bank-width = <2>;
 		device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-
-		partition@50000 {
-			label = "firmware";
-			reg = <0x50000 0x790000>;
-		};
-
-		partition@7e0000 {
-			label = "nvram";
-			reg = <0x7e0000 0x10000>;
-		};
-
-		partition@7f0000 {
-			label = "nvram_backup";
-			reg = <0x7f0000 0x10000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "firmware";
+				reg = <0x50000 0x790000>;
+			};
+
+			partition@7e0000 {
+				label = "nvram";
+				reg = <0x7e0000 0x10000>;
+			};
+
+			partition@7f0000 {
+				label = "nvram_backup";
+				reg = <0x7f0000 0x10000>;
+			};
 		};
 	};