ramips: add support for ELECOM WRC-1900GST

ELECOM WRC-1900GST is a wireless router, based on Mediatek MT7621A.
This is almost same as WRC-2533GST except wireless specs.

Specifications:

  - SoC : MT7621A (four logical CPU cores)
  - RAM : 128MiB
  - ROM : 16MiB of SPI NOR-FLASH
  - wireless :
          5GHz : 3T3R up to 1300Mbps/11ac with MT7615
          2.4GHz : 3T3R up to 600Mbps/11n with MT7615
  - Ethernet : 5 ports, all ports is capable of 1000base-T
  - Ether switch : MT7530 (MT7621A built-in)
  - LEDs : 4 LEDs
  - buttons : 2 buttons and 1 slide-switch
  - UART : header is on PCB, 57600bps

Flash instruction using factory image:

 1. Connect the computer to the LAN port of WRC-1900GST
 2. Connect power cable to WRC-1900GST and turn on it
 3. Access to "https://192.168.2.1/" and open firmware update
    page ("ファームウェア更新")
 4. Select the OpenWrt factory image and click apply ("適用")
    button
 5. Wait ~150 seconds to complete flashing

Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>

1 files changed, 2 insertions, 172 deletions

diff --git a/target/linux/ramips/dts/WRC-2533GST.dts b/target/linux/ramips/dts/WRC-2533GST.dts
index d4d47aa9a8..7aecdccbf6 100644
--- a/target/linux/ramips/dts/WRC-2533GST.dts
+++ b/target/linux/ramips/dts/WRC-2533GST.dts
@@ -1,179 +1,9 @@
 /dts-v1/;
 
-#include "mt7621.dtsi"
+#include "elecom_wrc-gst.dtsi"
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
 
 / {
 	compatible = "elecom,wrc-2533gst", "mediatek,mt7621-soc";
 	model = "ELECOM WRC-2533GST";
-
-	aliases {
-		led-status = &led_power_green;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led_power_green: power_green {
-			label = "wrc-2533gst:green:power";
-			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_blue {
-			label = "wrc-2533gst:blue:power";
-			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "wrc-2533gst:red:wps";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_red {
-			label = "wrc-2533gst:red:power";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		client {
-			label = "client";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-		};
-
-		ap {
-			label = "ap";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-		};
-
-		extender {
-			label = "extender";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-		};
-
-		router {
-			label = "router";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-		};
-	};
-};
-
-&ethernet {
-	mtd-mac-address = <&factory 0xe000>;
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-		m25p,chunked-io = <32>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				label = "firmware";
-				reg = <0x50000 0xb00000>;
-			};
-
-			partition@b50000 {
-				label = "tm_pattern";
-				reg = <0xb50000 0x380000>;
-				read-only;
-			};
-
-			partition@ed0000 {
-				label = "tm_key";
-				reg = <0xed0000 0x80000>;
-				read-only;
-			};
-
-			partition@f50000 {
-				label = "art_block";
-				reg = <0xf50000 0x30000>;
-				read-only;
-			};
-
-			partition@f80000 {
-				label = "user_data";
-				reg = <0xf80000 0x80000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "uart3", "jtag", "wdt", "sdhci";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-	/* WRC-2533GST has MT7615 for 2.4/5 GHz wifi, but it's not supported */
-};
-
-&xhci {
-	status = "disabled";
-};
+  };