sunxi: use upstream patch for Orange Pi R1

Instead of using our own device tree definitions use the one provided in
the upstream kernel for 4.16.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

2 files changed, 105 insertions, 196 deletions

diff --git a/target/linux/sunxi/patches-4.14/060-ARM-dts-sun8i-add-support-for-Orange-Pi-R1.patch b/target/linux/sunxi/patches-4.14/060-ARM-dts-sun8i-add-support-for-Orange-Pi-R1.patch
new file mode 100644
index 0000000000..e9d448792c
--- /dev/null
+++ b/target/linux/sunxi/patches-4.14/060-ARM-dts-sun8i-add-support-for-Orange-Pi-R1.patch
@@ -0,0 +1,105 @@
+From 74942cd5dfe4ac4fd982fe58118bc69346a2bd18 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Sun, 12 Nov 2017 20:41:29 +0800
+Subject: [PATCH] ARM: dts: sun8i: add support for Orange Pi R1
+
+Orange Pi R1 is a board design based on Orange Pi Zero, with XR819 Wi-Fi
+chip replaced by RTL8189ETV Wi-Fi module and the USB Type-A jack
+replaced by an onboard USB RTL8152B USB-Ethernet adapter.
+
+Add support for it.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/Makefile                      |  1 +
+ arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 73 +++++++++++++++++++++++++
+ 2 files changed, 74 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -916,6 +916,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
+ 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+ 	sun8i-a83t-bananapi-m3.dtb \
+ 	sun8i-a83t-cubietruck-plus.dtb \
++	sun8i-h2-plus-orangepi-r1.dtb \
+ 	sun8i-h2-plus-orangepi-zero.dtb \
+ 	sun8i-h3-bananapi-m2-plus.dtb \
+ 	sun8i-h3-beelink-x2.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
+@@ -0,0 +1,73 @@
++/*
++ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This file is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/* Orange Pi R1 is based on Orange Pi Zero design */
++#include "sun8i-h2-plus-orangepi-zero.dts"
++
++/ {
++	model = "Xunlong Orange Pi R1";
++	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
++
++	/delete-node/ reg_vcc_wifi;
++
++	aliases {
++		ethernet1 = &rtl8189etv;
++	};
++};
++
++&ohci1 {
++	/*
++	 * RTL8152B USB-Ethernet adapter is connected to USB1,
++	 * and it's a USB 2.0 device. So the OHCI1 controller
++	 * can be left disabled.
++	 */
++	status = "disabled";
++};
++
++&mmc1 {
++	vmmc-supply = <&reg_vcc3v3>;
++	vqmmc-supply = <&reg_vcc3v3>;
++
++	rtl8189etv: sdio_wifi@1 {
++		reg = <1>;
++	};
++};
diff --git a/target/linux/sunxi/patches-4.14/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch b/target/linux/sunxi/patches-4.14/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch
deleted file mode 100644
index 8506d07344..0000000000
--- a/target/linux/sunxi/patches-4.14/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-From daf75255fb67bf44db178e4c95a803b7972ed670 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 26 Sep 2017 22:29:06 +0200
-Subject: ARM: dts: sunxi: add support for Orange Pi R1 board
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile                      |   1 +
- arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 171 ++++++++++++++++++++++++
- 2 files changed, 172 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -917,6 +917,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-a83t-bananapi-m3.dtb \
- 	sun8i-a83t-cubietruck-plus.dtb \
- 	sun8i-h2-plus-orangepi-zero.dtb \
-+	sun8i-h2-plus-orangepi-r1.dtb \
- 	sun8i-h3-bananapi-m2-plus.dtb \
- 	sun8i-h3-beelink-x2.dtb \
- 	sun8i-h3-nanopi-m1.dtb	\
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
-@@ -0,0 +1,171 @@
-+/*
-+ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Based on sun8i-h2-plus-orangepi-zero.dts, which is:
-+ *   Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
-+ *
-+ * Based on sun8i-h3-orangepi-one.dts, which is:
-+ *   Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun8i-h3.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+	model = "Xunlong Orange Pi R1";
-+	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
-+		ethernet0 = &emac;
-+		ethernet1 = &xr819;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		pwr_led {
-+			label = "orangepi:green:pwr";
-+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
-+		};
-+
-+		status_led {
-+			label = "orangepi:red:status";
-+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	reg_vcc_wifi: reg_vcc_wifi {
-+		compatible = "regulator-fixed";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-name = "vcc-wifi";
-+		enable-active-high;
-+		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
-+		post-power-on-delay-ms = <200>;
-+	};
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	phy-handle = <&int_mii_phy>;
-+	phy-mode = "mii";
-+	allwinner,leds-active-low;
-+	status = "okay";
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins_a>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-+	cd-inverted;
-+	status = "okay";
-+};
-+
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins_a>;
-+	vmmc-supply = <&reg_vcc_wifi>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	/*
-+	 * Explicitly define the sdio device, so that we can add an ethernet
-+	 * alias for it (which e.g. makes u-boot set a mac-address).
-+	 */
-+	xr819: sdio_wifi@1 {
-+		reg = <1>;
-+	};
-+};
-+
-+&mmc1_pins_a {
-+	bias-pull-up;
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins_a>;
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart1_pins>;
-+	status = "disabled";
-+};
-+
-+&uart2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart2_pins>;
-+	status = "disabled";
-+};
-+
-+&usbphy {
-+	/* USB VBUS is always on */
-+	status = "okay";
-+};