diff options
| author | Mathias Kresin <dev@kresin.me> | 2016-08-19 20:46:50 +0200 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2016-08-20 11:47:25 +0200 |
| commit | bcd2113a32d80c0dc2c4140f76e96b28c3f70a27 (patch) | |
| tree | cf337fad1a46fb6c631cc706c1adc432777698e5 /target | |
| parent | a7c6cf5182a3b20afb1c98d0d79247d6a9bc104b (diff) | |
| download | upstream-bcd2113a32d80c0dc2c4140f76e96b28c3f70a27.tar.gz upstream-bcd2113a32d80c0dc2c4140f76e96b28c3f70a27.tar.bz2 upstream-bcd2113a32d80c0dc2c4140f76e96b28c3f70a27.zip | |
ramips: TEW-691GR: fix switch and wireless
Due to the missing phy-mode setting, the switch wasn't initialised.
The wireless requires an eeprom to work. Use the same mac addresses as
the stock firmware.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 3 | ||||
| -rw-r--r-- | target/linux/ramips/dts/TEW-691GR.dts | 5 |
2 files changed, 5 insertions, 3 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 73404d91b0..32bfa77f70 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -333,8 +333,7 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_binary factory 57350) ;; tew-691gr) - lan_mac=$(cat /sys/class/net/eth0/address) - wan_mac=$(macaddr_add "$lan_mac" 3) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3) ;; tew-692gr) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 1) diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts index 750c24fbe9..b1f7320851 100644 --- a/target/linux/ramips/dts/TEW-691GR.dts +++ b/target/linux/ramips/dts/TEW-691GR.dts @@ -86,7 +86,7 @@ }; ðernet { - mtd-mac-address = <&factory 0x28>; + mtd-mac-address = <&factory 0x4>; port@0 { phy-handle = <&phy0>; @@ -98,10 +98,13 @@ phy0: ethernet-phy@0 { reg = <0>; + phy-mode = "rgmii"; }; }; }; &wmac { + status = "okay"; + ralink,mtd-eeprom = <&factory 0x0>; ralink,5ghz = <0>; }; |