diff options
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/ramips/dts/EX6150.dts | 247 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 11 |
3 files changed, 259 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index f9f1e208f6..2df9259021 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -366,6 +366,7 @@ ramips_setup_interfaces() "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0" ;; dlink,dir-510l|\ + netgear,ex6150|\ re350-v1) ucidef_add_switch "switch0" \ "0:lan" "6@eth0" diff --git a/target/linux/ramips/dts/EX6150.dts b/target/linux/ramips/dts/EX6150.dts new file mode 100644 index 0000000000..729173bdd6 --- /dev/null +++ b/target/linux/ramips/dts/EX6150.dts @@ -0,0 +1,247 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "netgear,ex6150", "mediatek,mt7621-soc"; + model = "Netgear EX6150"; + + aliases { + led-boot = &power_green; + led-failsafe = &power_amber; + led-running = &power_green; + led-upgrade = &power_amber; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + leds { + compatible = "gpio-leds"; + + power_amber: power_amber { + label = "ex6150:amber:power"; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + power_green: power_green { + label = "ex6150:green:power"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "ex6150:green:wps"; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + rightarrow { + label = "ex6150:blue:rightarrow"; + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; + }; + + leftarrow { + label = "ex6150:blue:leftarrow"; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + }; + + router_green { + label = "ex6150:green:router"; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + router_red { + label = "ex6150:red:router"; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + }; + + client_green { + label = "ex6150:green:client"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + client_red { + label = "ex6150:red:client"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + reset { + label = "reset"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + toggle { + label = "AP/Extender toggle"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + /* Active when switch is set to "Access Point" */ + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xe80000>; + }; + + partition@ed0000 { + label = "ML1"; + reg = <0xed0000 0x10000>; + read-only; + }; + + partition@ef0000 { + label = "ML2"; + reg = <0xef0000 0x20000>; + read-only; + }; + + partition@f10000 { + label = "ML3"; + reg = <0xf10000 0x20000>; + read-only; + }; + + partition@f30000 { + label = "ML4"; + reg = <0xf30000 0x20000>; + read-only; + }; + + partition@f50000 { + label = "ML5"; + reg = <0xf50000 0x20000>; + read-only; + }; + + partition@f70000 { + label = "ML6"; + reg = <0xf70000 0x20000>; + read-only; + }; + + partition@f90000 { + label = "ML7"; + reg = <0xf90000 0x20000>; + read-only; + }; + + partition@fb0000 { + label = "T_Meter1"; + reg = <0xfb0000 0x10000>; + read-only; + }; + + partition@fc0000 { + label = "T_Meter2"; + reg = <0xfc0000 0x10000>; + read-only; + }; + + partition@fd0000 { + label = "POT"; + reg = <0xfd0000 0x10000>; + read-only; + }; + + partition@fe0000 { + label = "board_data"; + reg = <0xfe0000 0x10000>; + read-only; + }; + + partition@ff0000 { + label = "nvram"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&pcie1 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x00000004>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "sdhci", "rgmii2", "jtag"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 1f514a6d04..b15dfacaf6 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -324,6 +324,17 @@ define Device/r6220 endef TARGET_DEVICES += r6220 +define Device/netgear_ex6150 + DTS := EX6150 + DEVICE_TITLE := Netgear EX6150 + DEVICE_PACKAGES := kmod-mt76x2 wpad-basic + NETGEAR_BOARD_ID := U12H318T00_NETGEAR + IMAGE_SIZE := 14848k + IMAGES += factory.chk + IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk +endef +TARGET_DEVICES += netgear_ex6150 + define Device/netgear_r6350 DTS := R6350 BLOCKSIZE := 128k |