diff options
24 files changed, 338 insertions, 91 deletions
diff --git a/target/linux/generic/files/drivers/net/phy/psb6970.c b/target/linux/generic/files/drivers/net/phy/psb6970.c index 6cee75734b..fb6ed0e204 100644 --- a/target/linux/generic/files/drivers/net/phy/psb6970.c +++ b/target/linux/generic/files/drivers/net/phy/psb6970.c @@ -355,8 +355,6 @@ static int psb6970_config_init(struct phy_device *pdev) goto done; } - dev->phy_ptr = priv; - done: return ret; } diff --git a/target/linux/lantiq/Makefile b/target/linux/lantiq/Makefile index fc8aad4265..611a09256f 100644 --- a/target/linux/lantiq/Makefile +++ b/target/linux/lantiq/Makefile @@ -10,6 +10,7 @@ FEATURES:=squashfs SUBTARGETS:=xrx200 xway xway_legacy falcon ase KERNEL_PATCHVER:=5.4 +KERNEL_TESTING_PATCHVER:=5.10 define Target/Description Build firmware images for Lantiq SoC diff --git a/target/linux/lantiq/ase/config-5.10 b/target/linux/lantiq/ase/config-5.10 new file mode 100644 index 0000000000..7007016dde --- /dev/null +++ b/target/linux/lantiq/ase/config-5.10 @@ -0,0 +1,24 @@ +CONFIG_ADM6996_PHY=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +CONFIG_CPU_MIPSR1=y +CONFIG_CRC16=y +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_FIRMWARE_MEMMAP=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_HW_RANDOM=y +# CONFIG_ISDN is not set +CONFIG_LANTIQ_ETOP=y +CONFIG_NLS=y +CONFIG_SGL_ALLOC=y +CONFIG_SOC_AMAZON_SE=y +CONFIG_SOC_TYPE_XWAY=y +CONFIG_TARGET_ISA_REV=1 +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_SUPPORT=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/lantiq/config-5.10 b/target/linux/lantiq/config-5.10 index a8975864c8..b6cec7deb4 100644 --- a/target/linux/lantiq/config-5.10 +++ b/target/linux/lantiq/config-5.10 @@ -39,6 +39,7 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_CPU_SUPPORTS_MSA=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 CONFIG_CRYPTO_RNG2=y CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y @@ -61,7 +62,6 @@ CONFIG_GENERIC_GETTIMEOFDAY=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_IPI=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_LIB_ASHLDI3=y CONFIG_GENERIC_LIB_ASHRDI3=y @@ -116,7 +116,6 @@ CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HW_RANDOM=y CONFIG_HZ=250 CONFIG_HZ_250=y CONFIG_HZ_PERIODIC=y @@ -135,9 +134,11 @@ CONFIG_LANTIQ_WDT=y # CONFIG_LANTIQ_XRX200_LEGACY is not set CONFIG_LEDS_GPIO=y CONFIG_LIBFDT=y +CONFIG_LLD_VERSION=0 CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_MDIO_BUS=y CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_DEVRES=y CONFIG_MEMFD_CREATE=y CONFIG_MFD_CORE=y CONFIG_MFD_SYSCON=y @@ -145,12 +146,14 @@ CONFIG_MIGRATION=y CONFIG_MIPS=y CONFIG_MIPS_ASID_BITS=8 CONFIG_MIPS_ASID_SHIFT=0 +CONFIG_MIPS_CBPF_JIT=y CONFIG_MIPS_CLOCK_VSYSCALL=y # CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set # CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set CONFIG_MIPS_CMDLINE_FROM_DTB=y # CONFIG_MIPS_ELF_APPENDED_DTB is not set CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_LD_CAN_LINK_VDSO=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_NO_APPENDED_DTB is not set CONFIG_MIPS_RAW_APPENDED_DTB=y @@ -181,6 +184,7 @@ CONFIG_OF_IRQ=y CONFIG_OF_KOBJ=y CONFIG_OF_MDIO=y CONFIG_OF_NET=y +# CONFIG_PCIE_LANTIQ is not set CONFIG_PCI_DRIVERS_LEGACY=y CONFIG_PERF_USE_VMALLOC=y CONFIG_PGTABLE_LEVELS=2 @@ -199,10 +203,10 @@ CONFIG_RESET_CONTROLLER=y CONFIG_RESET_LANTIQ=y # CONFIG_SERIAL_8250 is not set CONFIG_SERIAL_LANTIQ=y +CONFIG_SERIAL_LANTIQ_CONSOLE=y # CONFIG_SOC_AMAZON_SE is not set # CONFIG_SOC_FALCON is not set -CONFIG_SOC_TYPE_XWAY=y -CONFIG_SOC_XWAY=y +# CONFIG_SOC_XWAY is not set CONFIG_SPI=y CONFIG_SPI_LANTIQ_SSC=y CONFIG_SPI_MASTER=y diff --git a/target/linux/lantiq/falcon/config-5.10 b/target/linux/lantiq/falcon/config-5.10 new file mode 100644 index 0000000000..3041c65dbd --- /dev/null +++ b/target/linux/lantiq/falcon/config-5.10 @@ -0,0 +1,9 @@ +CONFIG_CPU_HAS_DIEI=y +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux" +CONFIG_PINCTRL_FALCON=y +CONFIG_SOC_FALCON=y +CONFIG_SPI_FALCON=y diff --git a/target/linux/lantiq/patches-5.10/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-5.10/0001-MIPS-lantiq-add-pcie-driver.patch index cb482bc522..2408978a27 100644 --- a/target/linux/lantiq/patches-5.10/0001-MIPS-lantiq-add-pcie-driver.patch +++ b/target/linux/lantiq/patches-5.10/0001-MIPS-lantiq-add-pcie-driver.patch @@ -65,7 +65,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> endif --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile -@@ -51,6 +51,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o +@@ -43,6 +43,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o @@ -153,10 +153,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + ifx_pcie_rc_class_early_fixup); --- a/arch/mips/pci/fixup-lantiq.c +++ b/arch/mips/pci/fixup-lantiq.c -@@ -6,12 +6,18 @@ +@@ -6,12 +6,19 @@ #include <linux/of_irq.h> #include <linux/of_pci.h> ++#include <linux/pci.h> +#include "ifxmips_pci_common.h" int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL; @@ -172,7 +173,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (ltq_pci_plat_arch_init) return ltq_pci_plat_arch_init(dev); -@@ -23,5 +29,10 @@ int pcibios_plat_dev_init(struct pci_dev +@@ -23,5 +30,10 @@ int pcibios_plat_dev_init(struct pci_dev int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { @@ -5470,7 +5471,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig -@@ -52,6 +52,7 @@ config PCIEAER_INJECT +@@ -51,6 +51,7 @@ config PCIEAER_INJECT config PCIE_ECRC bool "PCI Express ECRC settings control" depends on PCIEAER @@ -5480,7 +5481,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> (transaction layer end-to-end CRC checking). --- a/include/linux/pci.h +++ b/include/linux/pci.h -@@ -1390,6 +1390,8 @@ void pci_walk_bus(struct pci_bus *top, i +@@ -1416,6 +1416,8 @@ void pci_walk_bus(struct pci_bus *top, i void *userdata); int pci_cfg_space_size(struct pci_dev *dev); unsigned char pci_bus_max_busnr(struct pci_bus *bus); diff --git a/target/linux/lantiq/patches-5.10/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-5.10/0004-MIPS-lantiq-add-atm-hack.patch index 2cbcf06a01..e215df60ee 100644 --- a/target/linux/lantiq/patches-5.10/0004-MIPS-lantiq-add-atm-hack.patch +++ b/target/linux/lantiq/patches-5.10/0004-MIPS-lantiq-add-atm-hack.patch @@ -441,7 +441,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> { --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c -@@ -62,6 +62,10 @@ void (*_dma_cache_wback_inv)(unsigned lo +@@ -61,6 +61,10 @@ void (*_dma_cache_wback_inv)(unsigned lo void (*_dma_cache_wback)(unsigned long start, unsigned long size); void (*_dma_cache_inv)(unsigned long start, unsigned long size); diff --git a/target/linux/lantiq/patches-5.10/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-5.10/0018-MTD-nand-lots-of-xrx200-fixes.patch index d68466c368..d8393f352a 100644 --- a/target/linux/lantiq/patches-5.10/0018-MTD-nand-lots-of-xrx200-fixes.patch +++ b/target/linux/lantiq/patches-5.10/0018-MTD-nand-lots-of-xrx200-fixes.patch @@ -33,9 +33,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +static __be32 req_mask = 0; + struct xway_nand_data { + struct nand_controller controller; struct nand_chip chip; - unsigned long csflags; -@@ -91,10 +109,22 @@ static void xway_select_chip(struct nand +@@ -92,10 +110,22 @@ static void xway_select_chip(struct nand case -1: ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON); ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON); @@ -58,7 +58,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON); ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON); break; -@@ -107,6 +137,11 @@ static void xway_cmd_ctrl(struct nand_ch +@@ -108,6 +138,11 @@ static void xway_cmd_ctrl(struct nand_ch { struct mtd_info *mtd = nand_to_mtd(chip); @@ -70,7 +70,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (cmd == NAND_CMD_NONE) return; -@@ -117,6 +152,24 @@ static void xway_cmd_ctrl(struct nand_ch +@@ -118,6 +153,24 @@ static void xway_cmd_ctrl(struct nand_ch while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) ; @@ -95,7 +95,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> } static int xway_dev_ready(struct nand_chip *chip) -@@ -156,6 +209,7 @@ static int xway_nand_probe(struct platfo +@@ -171,6 +224,7 @@ static int xway_nand_probe(struct platfo int err; u32 cs; u32 cs_flag = 0; @@ -103,7 +103,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* Allocate memory for the device structure (and zero it) */ data = devm_kzalloc(&pdev->dev, sizeof(struct xway_nand_data), -@@ -191,6 +245,15 @@ static int xway_nand_probe(struct platfo +@@ -207,6 +261,15 @@ static int xway_nand_probe(struct platfo if (!err && cs == 1) cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1; diff --git a/target/linux/lantiq/patches-5.10/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch b/target/linux/lantiq/patches-5.10/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch index 9b326c50d1..4265eeca57 100644 --- a/target/linux/lantiq/patches-5.10/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch +++ b/target/linux/lantiq/patches-5.10/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch @@ -8,12 +8,34 @@ happy. Signed-off-by: Mathias Kresin <dev@kresin.me> --- - arch/mips/lantiq/xway/sysctrl.c | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) + arch/mips/lantiq/xway/sysctrl.c | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c +@@ -469,9 +469,9 @@ void __init ltq_soc_init(void) + + if (of_machine_is_compatible("lantiq,grx390") || + of_machine_is_compatible("lantiq,ar10")) { +- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY0); +- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY1); +- clkdev_add_pmu("1e108000.switch", "gphy2", 0, 0, PMU_GPHY2); ++ clkdev_add_pmu("1f203020.gphy", NULL, 1, 0, PMU_GPHY0); ++ clkdev_add_pmu("1f203068.gphy", NULL, 1, 0, PMU_GPHY1); ++ clkdev_add_pmu("1f2030ac.gphy", NULL, 1, 0, PMU_GPHY2); + clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB0_P); + clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB1_P); + /* rc 0 */ @@ -503,7 +503,7 @@ void __init ltq_soc_init(void) + } else if (of_machine_is_compatible("lantiq,grx390")) { + clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(), + ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz()); +- clkdev_add_pmu("1e108000.switch", "gphy3", 0, 0, PMU_GPHY3); ++ clkdev_add_pmu("1f203264.gphy", NULL, 1, 0, PMU_GPHY3); + clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); + clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1); + /* rc 2 */ +@@ -511,7 +511,7 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI); clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL); @@ -22,7 +44,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me> clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); } else if (of_machine_is_compatible("lantiq,ar10")) { -@@ -511,11 +511,11 @@ void __init ltq_soc_init(void) +@@ -519,7 +519,7 @@ void __init ltq_soc_init(void) ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz()); clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1); @@ -30,14 +52,8 @@ Signed-off-by: Mathias Kresin <dev@kresin.me> + clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP | PMU_PPE_TC); clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); -- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY); -- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY); -+ clkdev_add_pmu("1f203020.gphy", NULL, 1, 0, PMU_GPHY); -+ clkdev_add_pmu("1f203068.gphy", NULL, 1, 0, PMU_GPHY); clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); - clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE); - clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); -@@ -534,12 +534,12 @@ void __init ltq_soc_init(void) +@@ -540,12 +540,12 @@ void __init ltq_soc_init(void) clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS); clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); diff --git a/target/linux/lantiq/patches-5.10/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch b/target/linux/lantiq/patches-5.10/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch index 6a2143e17e..d95e36caad 100644 --- a/target/linux/lantiq/patches-5.10/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch +++ b/target/linux/lantiq/patches-5.10/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch @@ -16,24 +16,24 @@ Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig -@@ -108,7 +108,13 @@ config LANTIQ_ETOP +@@ -107,7 +107,13 @@ config LANTIQ_ETOP tristate "Lantiq SoC ETOP driver" depends on SOC_TYPE_XWAY - ---help--- + help - Support for the MII0 inside the Lantiq SoC + Support for the MII0 inside the Lantiq ADSL SoC + +config LANTIQ_XRX200_LEGACY + tristate "Lantiq SoC XRX200 driver" + depends on SOC_TYPE_XWAY -+ ---help--- ++ help + Support for the MII0 inside the Lantiq VDSL SoC config LANTIQ_XRX200 tristate "Lantiq / Intel xRX200 PMAC network driver" --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile -@@ -51,6 +51,7 @@ obj-$(CONFIG_JME) += jme.o +@@ -50,6 +50,7 @@ obj-$(CONFIG_JME) += jme.o obj-$(CONFIG_KORINA) += korina.o obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o @@ -209,7 +209,7 @@ Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver +}; --- /dev/null +++ b/drivers/net/ethernet/lantiq_xrx200_legacy.c -@@ -0,0 +1,1927 @@ +@@ -0,0 +1,1930 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -1281,7 +1281,7 @@ Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver + return &priv->stats; +} + -+static void xrx200_tx_timeout(struct net_device *dev) ++static void xrx200_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct xrx200_priv *priv = netdev_priv(dev); + @@ -1570,16 +1570,14 @@ Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver + return 0; +} + -+static void xrx200_phy_link_change(struct phy_device *phydev, bool up, bool do_carrier) ++static void xrx200_phy_link_change(struct phy_device *phydev, bool up) +{ + struct net_device *netdev = phydev->attached_dev; + -+ if (do_carrier) { -+ if (up) -+ netif_carrier_on(netdev); -+ else if (!xrx200_phy_has_link(netdev)) -+ netif_carrier_off(netdev); -+ } ++ if (up) ++ netif_carrier_on(netdev); ++ else if (!xrx200_phy_has_link(netdev)) ++ netif_carrier_off(netdev); + + phydev->adjust_link(netdev); +} @@ -1897,6 +1895,7 @@ Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver +{ + const __be32 *addr, *id = of_get_property(port, "reg", NULL); + struct xrx200_port *p = &priv->port[priv->num_port]; ++ int ret; + + if (!id) + return; @@ -1909,7 +1908,11 @@ Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver + + p->num = *id; + p->phy_addr = *addr; -+ p->phy_if = of_get_phy_mode(port); ++ ++ ret = of_get_phy_mode(port, &p->phy_if); ++ if (ret) ++ pr_err("Can't find phy-mode for port\n"); ++ + if (p->phy_addr > 0x10) + p->flags = XRX200_PORT_TYPE_MAC; + else diff --git a/target/linux/lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch index 094496a16d..441aaed05b 100644 --- a/target/linux/lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch +++ b/target/linux/lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch @@ -171,7 +171,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + int rx_irq; + + unsigned char mac[6]; -+ int mii_mode; ++ phy_interface_t mii_mode; + + spinlock_t lock; + @@ -330,7 +330,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> { struct ltq_etop_priv *priv = netdev_priv(dev); - int i; -+ int mii_mode = priv->mii_mode; ++ phy_interface_t mii_mode = priv->mii_mode; - ltq_pmu_enable(PMU_PPE); + clk_enable(priv->clk_ppe); @@ -687,7 +687,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> spin_unlock_irqrestore(&priv->lock, flags); return 0; -@@ -563,6 +760,9 @@ ltq_etop_init(struct net_device *dev) +@@ -556,6 +753,9 @@ ltq_etop_init(struct net_device *dev) if (err) goto err_hw; ltq_etop_change_mtu(dev, 1500); @@ -697,7 +697,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); if (!is_valid_ether_addr(mac.sa_data)) { -@@ -580,9 +780,10 @@ ltq_etop_init(struct net_device *dev) +@@ -573,9 +773,10 @@ ltq_etop_init(struct net_device *dev) dev->addr_assign_type = NET_ADDR_RANDOM; ltq_etop_set_multicast_list(dev); @@ -711,7 +711,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> return 0; err_netdev: -@@ -602,6 +803,9 @@ ltq_etop_tx_timeout(struct net_device *d +@@ -595,6 +796,9 @@ ltq_etop_tx_timeout(struct net_device *d err = ltq_etop_hw_init(dev); if (err) goto err_hw; @@ -721,7 +721,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> netif_trans_update(dev); netif_wake_queue(dev); return; -@@ -625,14 +829,19 @@ static const struct net_device_ops ltq_e +@@ -618,14 +822,19 @@ static const struct net_device_ops ltq_e .ndo_tx_timeout = ltq_etop_tx_timeout, }; @@ -745,7 +745,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { -@@ -658,31 +867,62 @@ ltq_etop_probe(struct platform_device *p +@@ -651,31 +860,64 @@ ltq_etop_probe(struct platform_device *p goto err_out; } @@ -760,7 +760,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + err = -ENOENT; + goto err_out; + } -+ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev, ++ ltq_gbit_membase = devm_ioremap(&pdev->dev, + gbit_res->start, resource_size(gbit_res)); + if (!ltq_gbit_membase) { + dev_err(&pdev->dev, "failed to remap gigabit switch %d\n", @@ -781,7 +781,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> priv->netdev = dev; + priv->tx_irq = irqres[0].start; + priv->rx_irq = irqres[1].start; -+ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node); ++ err = of_get_phy_mode(pdev->dev.of_node, &priv->mii_mode); ++ if (err) ++ pr_err("Can't find phy-mode for port\n"); + + mac = of_get_mac_address(pdev->dev.of_node); + if (mac) @@ -823,7 +825,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> err = register_netdev(dev); if (err) -@@ -711,31 +951,22 @@ ltq_etop_remove(struct platform_device * +@@ -704,31 +946,22 @@ ltq_etop_remove(struct platform_device * return 0; } diff --git a/target/linux/lantiq/patches-5.10/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-5.10/0030-GPIO-add-named-gpio-exports.patch index 419516978c..209548bccd 100644 --- a/target/linux/lantiq/patches-5.10/0030-GPIO-add-named-gpio-exports.patch +++ b/target/linux/lantiq/patches-5.10/0030-GPIO-add-named-gpio-exports.patch @@ -22,7 +22,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> #include "gpiolib.h" #include "gpiolib-of.h" -@@ -915,3 +917,72 @@ void of_gpiochip_remove(struct gpio_chip +@@ -1039,3 +1041,72 @@ void of_gpiochip_remove(struct gpio_chip { of_node_put(chip->of_node); } @@ -97,7 +97,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#endif --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h -@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g +@@ -125,6 +125,12 @@ static inline int gpio_export(unsigned g return gpiod_export(gpio_to_desc(gpio), direction_may_change); } @@ -112,7 +112,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> { --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h -@@ -668,6 +668,7 @@ static inline void devm_acpi_dev_remove_ +@@ -715,6 +715,7 @@ static inline void devm_acpi_dev_remove_ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) @@ -120,7 +120,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> int gpiod_export(struct gpio_desc *desc, bool direction_may_change); int gpiod_export_link(struct device *dev, const char *name, struct gpio_desc *desc); -@@ -675,6 +676,13 @@ void gpiod_unexport(struct gpio_desc *de +@@ -722,6 +723,13 @@ void gpiod_unexport(struct gpio_desc *de #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ @@ -136,7 +136,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> { --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c -@@ -563,7 +563,7 @@ static struct class gpio_class = { +@@ -564,7 +564,7 @@ static struct class gpio_class = { * * Returns zero on success, else an error. */ @@ -145,7 +145,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> { struct gpio_chip *chip; struct gpio_device *gdev; -@@ -625,6 +625,8 @@ int gpiod_export(struct gpio_desc *desc, +@@ -626,6 +626,8 @@ int gpiod_export(struct gpio_desc *desc, offset = gpio_chip_hwgpio(desc); if (chip->names && chip->names[offset]) ioname = chip->names[offset]; @@ -154,7 +154,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> dev = device_create_with_groups(&gpio_class, &gdev->dev, MKDEV(0, 0), data, gpio_groups, -@@ -646,6 +648,12 @@ err_unlock: +@@ -647,6 +649,12 @@ err_unlock: gpiod_dbg(desc, "%s: status %d\n", __func__, status); return status; } diff --git a/target/linux/lantiq/patches-5.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-5.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch index 2493da32ec..154cf226c1 100644 --- a/target/linux/lantiq/patches-5.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch +++ b/target/linux/lantiq/patches-5.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch @@ -18,7 +18,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -729,6 +729,16 @@ config I2C_MESON +@@ -753,6 +753,16 @@ config I2C_MESON If you say yes to this option, support will be included for the I2C interface on the Amlogic Meson family of SoCs. @@ -37,7 +37,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> depends on PPC --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile -@@ -73,6 +73,7 @@ obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-l +@@ -72,6 +72,7 @@ obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-l obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o diff --git a/target/linux/lantiq/patches-5.10/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-5.10/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch index 82567be690..c80045e878 100644 --- a/target/linux/lantiq/patches-5.10/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch +++ b/target/linux/lantiq/patches-5.10/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch @@ -203,7 +203,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +early_param("ethaddr", setup_ethaddr); --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c -@@ -764,7 +764,11 @@ ltq_etop_init(struct net_device *dev) +@@ -757,7 +757,11 @@ ltq_etop_init(struct net_device *dev) if (err) goto err_hw; diff --git a/target/linux/lantiq/patches-5.10/0042-arch-mips-increase-io_space_limit.patch b/target/linux/lantiq/patches-5.10/0042-arch-mips-increase-io_space_limit.patch index 7c0d10ed10..c81222af57 100644 --- a/target/linux/lantiq/patches-5.10/0042-arch-mips-increase-io_space_limit.patch +++ b/target/linux/lantiq/patches-5.10/0042-arch-mips-increase-io_space_limit.patch @@ -7,17 +7,18 @@ this value comes from x86 and breaks some pci devices Signed-off-by: John Crispin <john@phrozen.org> --- - arch/mips/include/asm/io.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) + arch/mips/include/asm/mach-lantiq/spaces.h | 8 ++++++++ + 1 file changed, 8 insertions(+) + create mode 100644 arch/mips/include/asm/mach-lantiq/spaces.h ---- a/arch/mips/include/asm/io.h -+++ b/arch/mips/include/asm/io.h -@@ -53,7 +53,7 @@ - - /* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ - --#define IO_SPACE_LIMIT 0xffff -+#define IO_SPACE_LIMIT 0xffffffff - - /* - * On MIPS I/O ports are memory mapped, so we access them using normal +--- /dev/null ++++ b/arch/mips/include/asm/mach-lantiq/spaces.h +@@ -0,0 +1,8 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++#ifndef __ASM_MACH_LANTIQ_SPACES_H_ ++#define __ASM_MACH_LANTIQ_SPACES_H_ ++ ++#define IO_SPACE_LIMIT 0xffffffff ++ ++#include <asm/mach-generic/spaces.h> ++#endif diff --git a/target/linux/lantiq/patches-5.10/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-5.10/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch index d63d48ad1f..333a2e6377 100644 --- a/target/linux/lantiq/patches-5.10/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch +++ b/target/linux/lantiq/patches-5.10/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch @@ -24,7 +24,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -92,7 +92,14 @@ static void dwc2_set_rk_params(struct dw - p->power_down = 0; + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; } -static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg) @@ -62,7 +62,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg) { struct dwc2_core_params *p = &hsotg->params; -@@ -167,8 +182,11 @@ const struct of_device_id dwc2_of_match_ +@@ -196,8 +211,11 @@ const struct of_device_id dwc2_of_match_ { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params }, { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params }, { .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params }, diff --git a/target/linux/lantiq/patches-5.10/0051-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-5.10/0051-MIPS-lantiq-improve-USB-initialization.patch index 3f276e1158..17e07cd63a 100644 --- a/target/linux/lantiq/patches-5.10/0051-MIPS-lantiq-improve-USB-initialization.patch +++ b/target/linux/lantiq/patches-5.10/0051-MIPS-lantiq-improve-USB-initialization.patch @@ -15,7 +15,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -244,6 +244,25 @@ static void pmu_disable(struct clk *clk) +@@ -248,6 +248,25 @@ static void pmu_disable(struct clk *clk) pr_warn("deactivating PMU module failed!"); } @@ -41,7 +41,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> /* the pci enable helper */ static int pci_enable(struct clk *clk) { -@@ -565,4 +584,5 @@ void __init ltq_soc_init(void) +@@ -571,4 +590,5 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); } diff --git a/target/linux/lantiq/patches-5.10/0101-find_active_root.patch b/target/linux/lantiq/patches-5.10/0101-find_active_root.patch index d541cc247c..14c33e31a6 100644 --- a/target/linux/lantiq/patches-5.10/0101-find_active_root.patch +++ b/target/linux/lantiq/patches-5.10/0101-find_active_root.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/parsers/ofpart_core.c +++ b/drivers/mtd/parsers/ofpart_core.c -@@ -33,6 +33,38 @@ static bool node_has_compatible(struct d +@@ -38,6 +38,38 @@ static bool node_has_compatible(struct d return of_get_property(pp, "compatible", NULL); } @@ -39,7 +39,7 @@ static int parse_fixed_partitions(struct mtd_info *master, const struct mtd_partition **pparts, struct mtd_part_parser_data *data) -@@ -46,6 +78,8 @@ static int parse_fixed_partitions(struct +@@ -51,6 +83,8 @@ static int parse_fixed_partitions(struct struct device_node *pp; int nr_parts, i, ret = 0; bool dedicated = true; @@ -48,7 +48,7 @@ /* Pull of_node from the master device node */ mtd_node = mtd_get_of_node(master); -@@ -86,7 +120,9 @@ static int parse_fixed_partitions(struct +@@ -93,7 +127,9 @@ static int parse_fixed_partitions(struct return 0; parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL); @@ -59,9 +59,9 @@ return -ENOMEM; i = 0; -@@ -135,6 +171,11 @@ static int parse_fixed_partitions(struct - if (of_get_property(pp, "lock", &len)) - parts[i].mask_flags |= MTD_POWERUP_LOCK; +@@ -145,6 +181,11 @@ static int parse_fixed_partitions(struct + if (of_property_read_bool(pp, "slc-mode")) + parts[i].add_flags |= MTD_SLC_ON_MLC_EMULATION; + if (!proot_id && of_device_is_compatible(pp, "brnboot,root-selector")) + proot_id = brnboot_get_selected_root_part(master, parts[i].offset); @@ -71,7 +71,7 @@ i++; } -@@ -144,6 +185,11 @@ static int parse_fixed_partitions(struct +@@ -154,6 +195,11 @@ static int parse_fixed_partitions(struct if (quirks && quirks->post_parse) quirks->post_parse(master, parts, nr_parts); @@ -83,7 +83,7 @@ *pparts = parts; return nr_parts; -@@ -154,6 +200,7 @@ ofpart_fail: +@@ -164,6 +210,7 @@ ofpart_fail: ofpart_none: of_node_put(pp); kfree(parts); diff --git a/target/linux/lantiq/patches-5.10/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-5.10/0151-lantiq-ifxmips_pcie-use-of.patch index bc02a58b1c..10633199e6 100644 --- a/target/linux/lantiq/patches-5.10/0151-lantiq-ifxmips_pcie-use-of.patch +++ b/target/linux/lantiq/patches-5.10/0151-lantiq-ifxmips_pcie-use-of.patch @@ -376,7 +376,7 @@ struct clk *clk; --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile -@@ -51,7 +51,7 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o +@@ -43,7 +43,7 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o diff --git a/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch index 822d905246..6b41f017aa 100644 --- a/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch +++ b/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch @@ -1,6 +1,6 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -2377,6 +2377,12 @@ config MIPS_VPE_LOADER +@@ -2425,6 +2425,12 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. diff --git a/target/linux/lantiq/patches-5.10/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch b/target/linux/lantiq/patches-5.10/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch index 1beef0e1fe..01b87b9d5c 100644 --- a/target/linux/lantiq/patches-5.10/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch +++ b/target/linux/lantiq/patches-5.10/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch @@ -1,6 +1,6 @@ --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -422,6 +422,20 @@ static void clkdev_add_clkout(void) +@@ -426,6 +426,20 @@ static void clkdev_add_clkout(void) } } @@ -21,7 +21,7 @@ /* bring up all register ranges that we need for basic system control */ void __init ltq_soc_init(void) { -@@ -585,4 +599,6 @@ void __init ltq_soc_init(void) +@@ -591,4 +605,6 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); } usb_set_clock(); diff --git a/target/linux/lantiq/xrx200/config-5.10 b/target/linux/lantiq/xrx200/config-5.10 new file mode 100644 index 0000000000..7f3048135a --- /dev/null +++ b/target/linux/lantiq/xrx200/config-5.10 @@ -0,0 +1,100 @@ +CONFIG_AT803X_PHY=y +CONFIG_BLK_MQ_PCI=y +CONFIG_CPU_HAS_DIEI=y +CONFIG_CPU_MIPSR2_IRQ_EI=y +CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_RMAP=y +CONFIG_CRC16=y +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_ZSTD=y +CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin" +CONFIG_EXTRA_FIRMWARE_DIR="firmware" +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_HWMON=y +CONFIG_HW_RANDOM=y +CONFIG_ICPLUS_PHY=y +CONFIG_IFX_VPE_EXT=y +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_POLLDEV=y +CONFIG_INTEL_XWAY_PHY=y +# CONFIG_ISDN is not set +CONFIG_LANTIQ_XRX200_LEGACY=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MIPS_MT=y +# CONFIG_MIPS_MT_FPAFF is not set +CONFIG_MIPS_MT_SMP=y +CONFIG_MIPS_NR_CPU_NR_MAP=2 +CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y +CONFIG_MIPS_VPE_APSP_API=y +CONFIG_MIPS_VPE_APSP_API_MT=y +CONFIG_MIPS_VPE_LOADER=y +CONFIG_MIPS_VPE_LOADER_MT=y +CONFIG_MIPS_VPE_LOADER_TOM=y +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_NAND_XWAY=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NLS=y +CONFIG_NR_CPUS=2 +CONFIG_PADATA=y +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_LANTIQ=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LANTIQ=y +CONFIG_PHY_LANTIQ_VRX200_PCIE=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_SUPPLY_HWMON=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_SENSORS_LTQ_CPUTEMP=y +CONFIG_SGL_ALLOC=y +CONFIG_SMP=y +CONFIG_SMP_UP=y +CONFIG_SOC_TYPE_XWAY=y +CONFIG_SOC_XWAY=y +CONFIG_SWCONFIG_LEDS=y +CONFIG_SYNC_R4K=y +CONFIG_SYS_SUPPORTS_SCHED_SMT=y +CONFIG_SYS_SUPPORTS_SMP=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UBIFS_FS_ZSTD=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_SUPPORT=y +CONFIG_XPS=y +CONFIG_XRX200_PHY_FW=y +CONFIG_XXHASH=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZSTD_COMPRESS=y +CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/lantiq/xway/config-5.10 b/target/linux/lantiq/xway/config-5.10 new file mode 100644 index 0000000000..cfd03acc7e --- /dev/null +++ b/target/linux/lantiq/xway/config-5.10 @@ -0,0 +1,49 @@ +CONFIG_ADM6996_PHY=y +CONFIG_AR8216_PHY=y +CONFIG_AT803X_PHY=y +CONFIG_BLK_MQ_PCI=y +CONFIG_CPU_HAS_DIEI=y +CONFIG_CRC16=y +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_LZO=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_HW_RANDOM=y +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_POLLDEV=y +# CONFIG_ISDN is not set +CONFIG_LANTIQ_ETOP=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_NAND_XWAY=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_NLS=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LANTIQ=y +CONFIG_PSB6970_PHY=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_RTL8306_PHY=y +CONFIG_RTL8366RB_PHY=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8366_SMI=y +CONFIG_RTL8367B_PHY=y +CONFIG_RTL8367_PHY=y +CONFIG_SGL_ALLOC=y +CONFIG_SOC_TYPE_XWAY=y +CONFIG_SOC_XWAY=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_SUPPORT=y diff --git a/target/linux/lantiq/xway_legacy/config-5.10 b/target/linux/lantiq/xway_legacy/config-5.10 new file mode 100644 index 0000000000..0bc9bda1b8 --- /dev/null +++ b/target/linux/lantiq/xway_legacy/config-5.10 @@ -0,0 +1,39 @@ +CONFIG_ADM6996_PHY=y +CONFIG_AR8216_PHY=y +CONFIG_BLK_MQ_PCI=y +CONFIG_CPU_HAS_DIEI=y +CONFIG_CRC16=y +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_GENERIC_ALLOCATOR=y +# CONFIG_GPIO_SYSFS is not set +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_POLLDEV=y +# CONFIG_ISDN is not set +CONFIG_LANTIQ_ETOP=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_NLS=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LANTIQ=y +CONFIG_PSB6970_PHY=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_RTL8306_PHY=y +CONFIG_RTL8366RB_PHY=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8366_SMI=y +CONFIG_RTL8367B_PHY=y +CONFIG_RTL8367_PHY=y +CONFIG_SGL_ALLOC=y +CONFIG_SOC_TYPE_XWAY=y +CONFIG_SOC_XWAY=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_SUPPORT=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y |