aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds6
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.41
-rw-r--r--target/linux/ar71xx/config-4.91
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt11
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c191
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/generic/config-default3
-rw-r--r--target/linux/ar71xx/image/generic.mk42
13 files changed, 267 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index f2d66b2986..02f3ad911a 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -595,6 +595,12 @@ re450)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
;;
+rut900)
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
+ ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
+ ;;
smart-300)
ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 461b72f4d7..675c1f7718 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -428,6 +428,11 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan"
;;
+ rut900)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+ ;;
tellstick-znet-lite)
ucidef_set_interface_wan "eth0"
ucidef_set_interface_raw "wlan" "wlan0" "dhcp"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 63a9ebc1ec..1dece96f84 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -40,6 +40,7 @@ get_status_led() {
db120|\
dr342|\
dr344|\
+ rut900|\
tew-632brp|\
tl-wr942n-v1|\
wpj344|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 1de9d02965..1419579d83 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -995,6 +995,9 @@ ar71xx_board_detect() {
*"RouterStation Pro")
name="routerstation-pro"
;;
+ *"RUT900")
+ name="rut900"
+ ;;
*"RW2458N")
name="rw2458n"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 3bfedf82da..86d0476790 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -387,6 +387,7 @@ platform_check_image() {
onion-omega|\
oolite|\
re450|\
+ rut900|\
smart-300|\
som9331|\
tellstick-znet-lite|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index c5bcc4061a..1dc7127bfb 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -165,6 +165,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_RBSPI is not set
# CONFIG_ATH79_MACH_RBSXTLITE is not set
# CONFIG_ATH79_MACH_RE450 is not set
+# CONFIG_ATH79_MACH_RUT9XX is not set
# CONFIG_ATH79_MACH_RW2458N is not set
# CONFIG_ATH79_MACH_SC1750 is not set
# CONFIG_ATH79_MACH_SC300M is not set
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index 8815edf343..78393b13f4 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -163,6 +163,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_RBSPI is not set
# CONFIG_ATH79_MACH_RBSXTLITE is not set
# CONFIG_ATH79_MACH_RE450 is not set
+# CONFIG_ATH79_MACH_RUT9XX is not set
# CONFIG_ATH79_MACH_RW2458N is not set
# CONFIG_ATH79_MACH_SC1750 is not set
# CONFIG_ATH79_MACH_SC300M is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 43096463c2..2b7e086e2c 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1281,6 +1281,17 @@ config ATH79_MACH_RE450
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_RUT9XX
+ bool "Teltonika RUT900 series support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select GPIO_PCA953X
+
config ATH79_MACH_RW2458N
bool "Redwave RW2458N board support"
select SOC_AR724X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 53edaac712..4f3bb97e33 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -174,6 +174,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
obj-$(CONFIG_ATH79_MACH_RBSPI) += mach-rbspi.o
obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o
+obj-$(CONFIG_ATH79_MACH_RUT9XX) += mach-rut9xx.o
obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
obj-$(CONFIG_ATH79_MACH_SC1750) += mach-sc1750.o
obj-$(CONFIG_ATH79_MACH_SC300M) += mach-sc300m.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c
new file mode 100644
index 0000000000..43a2a78c67
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c
@@ -0,0 +1,191 @@
+/*
+ * Teltonika RUT900 series boards support
+ *
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define RUT9XX_GPIO_LED_LAN1 14
+#define RUT9XX_GPIO_LED_LAN2 13
+#define RUT9XX_GPIO_LED_LAN3 22
+#define RUT9XX_GPIO_LED_WAN 1
+
+#define RUT9XX_PCA9539_GPIO_BASE 32
+#define RUT9XX_PCA9539_GPIO_SIGNAL1 (0 + RUT9XX_PCA9539_GPIO_BASE)
+#define RUT9XX_PCA9539_GPIO_SIGNAL2 (1 + RUT9XX_PCA9539_GPIO_BASE)
+#define RUT9XX_PCA9539_GPIO_SIGNAL3 (2 + RUT9XX_PCA9539_GPIO_BASE)
+#define RUT9XX_PCA9539_GPIO_SIGNAL4 (3 + RUT9XX_PCA9539_GPIO_BASE)
+#define RUT9XX_PCA9539_GPIO_SIGNAL5 (4 + RUT9XX_PCA9539_GPIO_BASE)
+#define RUT9XX_PCA9539_GPIO_STATUS_R (5 + RUT9XX_PCA9539_GPIO_BASE)
+#define RUT9XX_PCA9539_GPIO_STATUS_G (6 + RUT9XX_PCA9539_GPIO_BASE)
+
+#define RUT9XX_GPIO_BTN_RESET 15
+
+#define RUT9XX_GPIO_I2C_SCK 16
+#define RUT9XX_GPIO_I2C_SDA 17
+
+#define RUT9XX_GPIO_EXT_LNA0 2
+
+#define RUT9XX_WMAC_CALDATA_OFFSET 0x1000
+
+#define RUT9XX_KEYS_POLL_INTERVAL 20
+#define RUT9XX_KEYS_DEBOUNCE_INTERVAL (3 * RUT9XX_KEYS_POLL_INTERVAL)
+
+static struct gpio_led rut900_leds_gpio[] __initdata = {
+ {
+ .name = "rut900:green:lan1",
+ .gpio = RUT9XX_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "rut900:green:lan2",
+ .gpio = RUT9XX_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "rut900:green:lan3",
+ .gpio = RUT9XX_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "rut900:green:signal1",
+ .gpio = RUT9XX_PCA9539_GPIO_SIGNAL1,
+ .active_low = 0,
+ }, {
+ .name = "rut900:green:signal2",
+ .gpio = RUT9XX_PCA9539_GPIO_SIGNAL2,
+ .active_low = 0,
+ }, {
+ .name = "rut900:green:signal3",
+ .gpio = RUT9XX_PCA9539_GPIO_SIGNAL3,
+ .active_low = 0,
+ }, {
+ .name = "rut900:green:signal4",
+ .gpio = RUT9XX_PCA9539_GPIO_SIGNAL4,
+ .active_low = 0,
+ }, {
+ .name = "rut900:green:signal5",
+ .gpio = RUT9XX_PCA9539_GPIO_SIGNAL5,
+ .active_low = 0,
+ }, {
+ .name = "rut900:green:status",
+ .gpio = RUT9XX_PCA9539_GPIO_STATUS_G,
+ .active_low = 0,
+ }, {
+ .name = "rut900:green:wan",
+ .gpio = RUT9XX_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "rut900:red:status",
+ .gpio = RUT9XX_PCA9539_GPIO_STATUS_R,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button rut900_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RUT9XX_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RUT9XX_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static struct i2c_gpio_platform_data rut900_i2c_gpio_data = {
+ .sda_pin = RUT9XX_GPIO_I2C_SDA,
+ .scl_pin = RUT9XX_GPIO_I2C_SCK,
+ .udelay = 10,
+};
+
+static struct platform_device rut900_i2c_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &rut900_i2c_gpio_data,
+ },
+};
+
+static struct pca953x_platform_data rut9xx_pca9539_data = {
+ .gpio_base = RUT9XX_PCA9539_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct i2c_board_info rut900_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pca9539", 0x74),
+ .platform_data = &rut9xx_pca9539_data,
+ },
+};
+
+static void __init rut900_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1f030000);
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f020000);
+ u8 wlan_mac[ETH_ALEN];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = 0xf1;
+
+ /* LAN */
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ /* WAN */
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ platform_device_register(&rut900_i2c_device);
+ i2c_register_board_info(0, rut900_i2c_devs,
+ ARRAY_SIZE(rut900_i2c_devs));
+
+ /* Disable JTAG (enables GPIO0-3) */
+ ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rut900_leds_gpio),
+ rut900_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, RUT9XX_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rut900_gpio_keys),
+ rut900_gpio_keys);
+
+ ath79_wmac_set_ext_lna_gpio(0, RUT9XX_GPIO_EXT_LNA0);
+
+ ath79_init_mac(wlan_mac, mac, 2);
+ ath79_register_wmac(art + RUT9XX_WMAC_CALDATA_OFFSET, wlan_mac);
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RUT9XX, "RUT900", "Teltonika RUT900", rut900_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 06fa4768c1..40ac034388 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -202,6 +202,7 @@ enum ath79_mach_type {
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
ATH79_MACH_RE450, /* TP-LINK RE450 */
+ ATH79_MACH_RUT9XX, /* Teltonika RUT900 series */
ATH79_MACH_RW2458N, /* Redwave RW2458N */
ATH79_MACH_SC1750, /* Abicom SC1750 */
ATH79_MACH_SC300M, /* Abicom SC300M */
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index 5d236b2e69..15116f5500 100644
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -122,6 +122,7 @@ CONFIG_ATH79_MACH_PQI_AIR_PEN=y
CONFIG_ATH79_MACH_QIHOO_C301=y
CONFIG_ATH79_MACH_R602N=y
CONFIG_ATH79_MACH_RE450=y
+CONFIG_ATH79_MACH_RUT9XX=y
CONFIG_ATH79_MACH_RW2458N=y
CONFIG_ATH79_MACH_SC1750=y
CONFIG_ATH79_MACH_SC300M=y
@@ -183,6 +184,8 @@ CONFIG_ATH79_MACH_ZCN_1523H=y
CONFIG_ATH79_NVRAM=y
CONFIG_ATH79_PCI_ATH9K_FIXUP=y
CONFIG_BLK_MQ_PCI=y
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_HW_HAS_PCI=y
# CONFIG_LEDS_WNDR3700_USB is not set
CONFIG_MYLOADER=y
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index f1efebc523..3fbfca35e0 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -7,6 +7,15 @@ define Build/alfa-network-rootfs-header
@mv $@.new $@
endef
+define Build/append-md5sum-bin
+ $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\
+ xargs echo -ne >> $@
+endef
+
+define Build/append-string
+ echo -n $(1) >> $@
+endef
+
define Build/mkbuffaloimg
$(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
-R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
@@ -68,6 +77,17 @@ define Build/seama-seal
$(call Build/seama,-s $@.seama $(1))
endef
+define Build/teltonika-fw-fake-checksum
+ # Teltonika U-Boot web based firmware upgrade/recovery routine compares
+ # 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes
+ # from begin of the firmware file) with 16 bytes stored just before
+ # 0xdeadc0de marker. Values are only compared, MD5 sum is not verified.
+ let \
+ offs="$$(stat -c%s $@) - 20"; \
+ dd if=$@ bs=1 count=16 skip=76 |\
+ dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc
+endef
+
define Build/uImageHiWiFi
# Field ih_name needs to start with "tw150v1"
mkimage -A $(LINUX_KARCH) \
@@ -620,6 +640,28 @@ define Device/r602n
endef
TARGET_DEVICES += r602n
+define Device/rut900
+ DEVICE_TITLE := Teltonika RUT900
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -uboot-envtools
+ BOARDNAME := RUT900
+ SUPPORTED_DEVICES := rut900
+ IMAGE_SIZE := 15552k
+ MTDPARTS := spi0.0:128k(u-boot)ro,64k(config)ro,64k(art)ro,15552k(firmware),576k(event-log)ro
+ TPLINK_HWID := 0x35000001
+ TPLINK_HWREV := 0x1
+ TPLINK_HEADER_VERSION := 1
+ KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
+ KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\
+ pad-rootfs | teltonika-fw-fake-checksum | append-string master |\
+ append-md5sum-bin | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata |\
+ check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += rut900
+
define Device/mc-mac1200r
$(Device/tplink-8mlzma)
DEVICE_TITLE := Mercury MAC1200R
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 23:32:21 +0000