aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/02_network1
-rw-r--r--target/linux/ramips/base-files/lib/preinit/06_set_iface_mac1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/IP2202.dts97
-rw-r--r--target/linux/ramips/image/Makefile3
-rw-r--r--target/linux/ramips/rt305x/profiles/poray.mk12
8 files changed, 121 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 689fee7104..6ecb13352c 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -45,6 +45,9 @@ get_status_led() {
fonera20n)
status_led="fonera20n:green:power"
;;
+ ip2202)
+ status_led="ip2202:green:run"
+ ;;
rt-n13u)
status_led="rt-n13u:power"
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 2df7b0842b..ef13e364a5 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -173,6 +173,7 @@ ramips_setup_macs()
broadway | \
dir-620-d1 | \
f5d8235-v1 | \
+ ip2202 | \
mpr-a1 | \
mpr-a2 | \
mzk-w300nh2 | \
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 6712154dc4..a0d9b6123b 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -60,6 +60,7 @@ preinit_set_mac_address() {
carambola |\
dir-615-h1 |\
fonera20n |\
+ ip2202 |\
rt-n13u |\
hw550-3g |\
nbg-419n |\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 6960c6d401..858a8092e7 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -148,6 +148,9 @@ ramips_board_detect() {
*"Planex MZK-W300NH2"*)
name="mzk-w300nh2"
;;
+ *"Poray IP2202")
+ name="ip2202"
+ ;;
*"Poray M3")
name="m3"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index df3b32479d..e85beada39 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -44,6 +44,7 @@ platform_check_image() {
freestation5 | \
hw550-3g | \
hg255d | \
+ ip2202 | \
m3 | \
m4 | \
mofi3500-3gn | \
diff --git a/target/linux/ramips/dts/IP2202.dts b/target/linux/ramips/dts/IP2202.dts
new file mode 100644
index 0000000000..ea9f1702e6
--- /dev/null
+++ b/target/linux/ramips/dts/IP2202.dts
@@ -0,0 +1,97 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+ compatible = "IP2202", "ralink,rt3052-soc";
+ model = "Poray IP2202";
+
+ palmbus@10000000 {
+ sysc@0 {
+ ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
+ ralink,gpiomux = "mdio";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+
+ ethernet@10100000 {
+ status = "okay";
+ };
+
+ esw@10110000 {
+ status = "okay";
+ ralink,portmap = <0x2f>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ run {
+ label = "ip2202:green:run";
+ gpios = <&gpio0 9 1>;
+ };
+ net {
+ label = "ip2202:amber:net";
+ gpios = <&gpio0 13 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ wmac@10180000 {
+ status = "okay";
+ ralink,led-polarity = <0>;
+ };
+
+ otg@101c0000 {
+ status = "okay";
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 4bfcced46f..88954f13aa 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -374,6 +374,8 @@ Image/Build/Profile/RT-N13U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n13u,RT-
Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freestation5,FREESTATION5)
+Image/Build/Profile/IP2202=$(call BuildFirmware/Default8M/$(1),$(1),ip2202,IP2202)
+
Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
@@ -516,6 +518,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/FREESTATION5,$(1))
# $(call Image/Build/Profile/HG255D,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
+ $(call Image/Build/Profile/IP2202,$(1))
$(call Image/Build/Profile/M3,$(1))
$(call Image/Build/Profile/M4,$(1))
$(call Image/Build/Profile/MOFI3500-3GN,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/poray.mk b/target/linux/ramips/rt305x/profiles/poray.mk
index 8c1ed6194f..ed017b7d84 100644
--- a/target/linux/ramips/rt305x/profiles/poray.mk
+++ b/target/linux/ramips/rt305x/profiles/poray.mk
@@ -5,6 +5,18 @@
# See /LICENSE for more information.
#
+define Profile/IP2202
+ NAME:=Poray IP2202
+ PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb-rt305x-dwc_otg \
+ kmod-ledtrig-netdev kmod-ledtrig-timer restorefactory
+endef
+
+define Profile/IP2202/Description
+ Package set for Poray IP2202 board
+endef
+
+$(eval $(call Profile,IP2202))
+
define Profile/M3
NAME:=Poray M3
PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer