aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/sunxi/config-4.9574
-rw-r--r--target/linux/sunxi/patches-4.9/0002-clk-sunxi-ng-Rename-the-internal-structures.patch239
-rw-r--r--target/linux/sunxi/patches-4.9/0003-clk-sunxi-ng-Remove-the-use-of-rational-computations.patch239
-rw-r--r--target/linux/sunxi/patches-4.9/0004-clk-sunxi-ng-Finish-to-convert-to-structures-for-arg.patch182
-rw-r--r--target/linux/sunxi/patches-4.9/0005-clk-sunxi-ng-Add-minimums-for-all-the-relevant-struc.patch256
-rw-r--r--target/linux/sunxi/patches-4.9/0006-clk-sunxi-ng-Implement-minimum-for-multipliers.patch132
-rw-r--r--target/linux/sunxi/patches-4.9/0007-clk-sunxi-ng-Add-A64-clocks.patch1295
-rw-r--r--target/linux/sunxi/patches-4.9/0010-arm64-dts-add-Allwinner-A64-SoC-.dtsi.patch311
-rw-r--r--target/linux/sunxi/patches-4.9/0011-arm64-dts-add-Pine64-support.patch176
-rw-r--r--target/linux/sunxi/patches-4.9/0012-arm64-dts-fix-build-errors-from-missing-dependencies.patch134
-rw-r--r--target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch84
-rw-r--r--target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch40
-rw-r--r--target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch47
-rw-r--r--target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch42
-rw-r--r--target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch32
-rw-r--r--target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch31
-rw-r--r--target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch69
-rw-r--r--target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch50
-rw-r--r--target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch62
-rw-r--r--target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch35
-rw-r--r--target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch52
-rw-r--r--target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch35
-rw-r--r--target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch29
-rw-r--r--target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch32
-rw-r--r--target/linux/sunxi/patches-4.9/0030-pinctrl-sunxi-Rework-the-pin-config-building-code.patch251
-rw-r--r--target/linux/sunxi/patches-4.9/0031-pinctrl-sunxi-Use-macros-from-bindings-header-file-f.patch38
-rw-r--r--target/linux/sunxi/patches-4.9/0032-pinctrl-sunxi-Handle-bias-disable.patch42
-rw-r--r--target/linux/sunxi/patches-4.9/0033-pinctrl-sunxi-Support-generic-binding.patch106
-rw-r--r--target/linux/sunxi/patches-4.9/0034-pinctrl-sunxi-Deal-with-configless-pins.patch128
-rw-r--r--target/linux/sunxi/patches-4.9/0035-pinctrl-sunxi-make-bool-drivers-explicitly-non-modul.patch437
-rw-r--r--target/linux/sunxi/patches-4.9/0036-pinctrl-sunxi-Free-configs-in-pinctrl_map-only-if-it.patch51
-rw-r--r--target/linux/sunxi/patches-4.9/0037-pinctrl-sunxi-Fix-PIN_CONFIG_BIAS_PULL_-DOWN-UP-argu.patch40
-rw-r--r--target/linux/sunxi/patches-4.9/0038-pinctrl-sunxi-Add-support-for-fetching-pinconf-setti.patch158
-rw-r--r--target/linux/sunxi/patches-4.9/0039-pinctrl-sunxi-Make-sunxi_pconf_group_set-use-sunxi_p.patch122
-rw-r--r--target/linux/sunxi/patches-4.9/0040-pinctrl-sunxi-Add-support-for-interrupt-debouncing.patch171
-rw-r--r--target/linux/sunxi/patches-4.9/0041-pinctrl-sunxi-fix-theoretical-uninitialized-variable.patch40
-rw-r--r--target/linux/sunxi/patches-4.9/0042-pinctrl-sunxi-Testing-the-wrong-variable.patch35
-rw-r--r--target/linux/sunxi/patches-4.9/0043-pinctrl-sunxi-Don-t-enforce-bias-disable-for-now.patch42
-rw-r--r--target/linux/sunxi/patches-4.9/0045-arm-dts-sun8i-add-common-dtsi-file-for-nanopi-SBCs.patch160
-rw-r--r--target/linux/sunxi/patches-4.9/0050-stmmac-form-4-10.patch3497
-rw-r--r--target/linux/sunxi/patches-4.9/0051-stmmac-form-4-11.patch2296
-rw-r--r--target/linux/sunxi/patches-4.9/0052-stmmac-form-4-12.patch5904
-rw-r--r--target/linux/sunxi/patches-4.9/0053-stmmac-form-4-13.patch1923
-rw-r--r--target/linux/sunxi/patches-4.9/0054-crypto-sun4i-ss_support_the_Security_System_PRNG.patch206
-rw-r--r--target/linux/sunxi/patches-4.9/0060-arm64-allwinner-sun50i-a64-Add-dt-node-for-the-sysco.patch33
-rw-r--r--target/linux/sunxi/patches-4.9/0061-arm64-allwinner-sun50i-a64-add-dwmac-sun8i-Ethernet-.patch69
-rw-r--r--target/linux/sunxi/patches-4.9/0062-arm64-allwinner-pine64-Enable-dwmac-sun8i.patch46
-rw-r--r--target/linux/sunxi/patches-4.9/0063-arm64-allwinner-pine64-plus-Enable-dwmac-sun8i.patch38
-rw-r--r--target/linux/sunxi/patches-4.9/0064-arm64-allwinner-sun50i-a64-Correct-emac-register-siz.patch26
-rw-r--r--target/linux/sunxi/patches-4.9/0065-arm64-allwinner-a64-pine64-add-missing-ethernet0-ali.patch29
-rw-r--r--target/linux/sunxi/patches-4.9/0070-arm-sun8i-sunxi-h3-h5-Add-dt-node-for-the-syscon-con.patch32
-rw-r--r--target/linux/sunxi/patches-4.9/0071-arm-sun8i-sunxi-h3-h5-add-dwmac-sun8i-ethernet-drive.patch67
-rw-r--r--target/linux/sunxi/patches-4.9/0072-arm-sun8i-orangepi-2-Enable-dwmac-sun8i.patch40
-rw-r--r--target/linux/sunxi/patches-4.9/0073-ARM-sun8i-orangepi-plus-Enable-dwmac-sun8i.patch64
-rw-r--r--target/linux/sunxi/patches-4.9/0074-ARM-dts-sunxi-h3-h5-Correct-emac-register-size.patch26
-rw-r--r--target/linux/sunxi/patches-4.9/0080-ARM-dts-sunxi-nanopi-neo-Enable-dwmac-sun8i.patch24
-rw-r--r--target/linux/sunxi/patches-4.9/0081-ARM-dts-sun8i-nanopi-neo-enable-UART-USB-and-I2C-pin.patch80
-rw-r--r--target/linux/sunxi/patches-4.9/090-sunxi-mmc-from-4-13.patch288
-rw-r--r--target/linux/sunxi/patches-4.9/115-musb-ignore-vbus-errors.patch26
-rw-r--r--target/linux/sunxi/patches-4.9/131-reset-add-h3-resets.patch92
-rw-r--r--target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch196
-rw-r--r--target/linux/sunxi/patches-4.9/205-arm-dts-sun8i-add-support-for-nanopi-m1-plus-board.patch168
62 files changed, 0 insertions, 21169 deletions
diff --git a/target/linux/sunxi/config-4.9 b/target/linux/sunxi/config-4.9
deleted file mode 100644
index 4a74fd1f4f..0000000000
--- a/target/linux/sunxi/config-4.9
+++ /dev/null
@@ -1,574 +0,0 @@
-# CONFIG_AHCI_SUNXI is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_AXXIA is not set
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=416
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PMU=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-# CONFIG_ATA_SFF is not set
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_AXP20X_POWER=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BINFMT_MISC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BOUNCE=y
-# CONFIG_BPF_SYSCALL is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CAN=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPACTION=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONNECTOR=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_SUN4I_SS=y
-CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SUN4I=y
-CONFIG_DMA_SUN6I=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_DWMAC_DWC_QOS_ETH is not set
-CONFIG_DWMAC_GENERIC=y
-# CONFIG_DWMAC_SUN8I is not set
-CONFIG_DWMAC_SUNXI=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ELF_CORE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-# CONFIG_F2FS_CHECK_FS is not set
-CONFIG_F2FS_FS=y
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-CONFIG_F2FS_STAT_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_LITTLE_ENDIAN=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SIMPLE=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_AXP209=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SMCCC=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_RCU_GUP=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
-CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_IRQFD=y
-CONFIG_HAVE_KVM_IRQ_ROUTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_SUN6I_P2WI=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_AXP20X_PEK=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-# CONFIG_KERNEL_MODE_NEON is not set
-CONFIG_KEYBOARD_SUN4I_LRADC=y
-CONFIG_KSM=y
-CONFIG_KVM=y
-CONFIG_KVM_ARM_HOST=y
-CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_VFIO=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_MACH_SUN4I=y
-CONFIG_MACH_SUN5I=y
-CONFIG_MACH_SUN6I=y
-CONFIG_MACH_SUN7I=y
-CONFIG_MACH_SUN8I=y
-CONFIG_MACH_SUN9I=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_SUN4I=y
-CONFIG_MEDIA_SUPPORT=y
-# CONFIG_MFD_AC100 is not set
-CONFIG_MFD_AXP20X=y
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X_RSB=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SUN6I_PRCM=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_SUNXI=y
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD is not set
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=8
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SUNXI_SID=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PHY_SUN9I_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_GR8=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_SUN4I_A10=y
-CONFIG_PINCTRL_SUN5I_A10S=y
-CONFIG_PINCTRL_SUN5I_A13=y
-CONFIG_PINCTRL_SUN6I_A31=y
-CONFIG_PINCTRL_SUN6I_A31S=y
-CONFIG_PINCTRL_SUN6I_A31_R=y
-CONFIG_PINCTRL_SUN7I_A20=y
-CONFIG_PINCTRL_SUN8I_A23=y
-CONFIG_PINCTRL_SUN8I_A23_R=y
-CONFIG_PINCTRL_SUN8I_A33=y
-CONFIG_PINCTRL_SUN8I_A83T=y
-CONFIG_PINCTRL_SUN8I_H3=y
-CONFIG_PINCTRL_SUN8I_H3_R=y
-CONFIG_PINCTRL_SUN9I_A80=y
-CONFIG_PINCTRL_SUN9I_A80_R=y
-CONFIG_PINCTRL_SUNXI=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_SUN4I=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_BOOST is not set
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_SUNXI=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_PMP=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-CONFIG_SDIO_UART=y
-CONFIG_SECURITYFS=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SND=y
-CONFIG_SND_COMPRESS_OFFLOAD=y
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-CONFIG_SND_PCM=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SUN4I_I2S is not set
-# CONFIG_SND_SUN4I_SPDIF is not set
-CONFIG_SOUND=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_SUN4I=y
-CONFIG_SPI_SUN6I=y
-CONFIG_SRCU=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-CONFIG_STRICT_DEVMEM=y
-# CONFIG_SUN4I_EMAC is not set
-CONFIG_SUN4I_TIMER=y
-# CONFIG_SUN50I_A64_CCU is not set
-CONFIG_SUN5I_HSTIMER=y
-CONFIG_SUN6I_A31_CCU=y
-CONFIG_SUN8I_A23_CCU=y
-CONFIG_SUN8I_A33_CCU=y
-CONFIG_SUN8I_H3_CCU=y
-CONFIG_SUNXI_CCU=y
-CONFIG_SUNXI_CCU_DIV=y
-CONFIG_SUNXI_CCU_FRAC=y
-CONFIG_SUNXI_CCU_GATE=y
-CONFIG_SUNXI_CCU_MP=y
-CONFIG_SUNXI_CCU_MULT=y
-CONFIG_SUNXI_CCU_MUX=y
-CONFIG_SUNXI_CCU_NK=y
-CONFIG_SUNXI_CCU_NKM=y
-CONFIG_SUNXI_CCU_NKMP=y
-CONFIG_SUNXI_CCU_NM=y
-CONFIG_SUNXI_CCU_PHASE=y
-CONFIG_SUNXI_RSB=y
-CONFIG_SUNXI_SRAM=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TOUCHSCREEN_PROPERTIES=y
-CONFIG_TOUCHSCREEN_SUN4I=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USERIO=y
-CONFIG_USE_OF=y
-CONFIG_VDSO=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VHOST=y
-CONFIG_VHOST_NET=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
diff --git a/target/linux/sunxi/patches-4.9/0002-clk-sunxi-ng-Rename-the-internal-structures.patch b/target/linux/sunxi/patches-4.9/0002-clk-sunxi-ng-Rename-the-internal-structures.patch
deleted file mode 100644
index f3e485d88a..0000000000
--- a/target/linux/sunxi/patches-4.9/0002-clk-sunxi-ng-Rename-the-internal-structures.patch
+++ /dev/null
@@ -1,239 +0,0 @@
-From a501a14e38cc4d8e9c91bb508cdca7032d53f717 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Fri, 30 Sep 2016 10:05:32 +0200
-Subject: clk: sunxi-ng: Rename the internal structures
-
-Rename the structures meant to be embedded in other structures to make it
-consistent with the mux structure name
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
----
- drivers/clk/sunxi-ng/ccu_div.h | 6 +++---
- drivers/clk/sunxi-ng/ccu_frac.c | 12 ++++++------
- drivers/clk/sunxi-ng/ccu_frac.h | 14 +++++++-------
- drivers/clk/sunxi-ng/ccu_mp.h | 4 ++--
- drivers/clk/sunxi-ng/ccu_mult.h | 4 ++--
- drivers/clk/sunxi-ng/ccu_nk.h | 4 ++--
- drivers/clk/sunxi-ng/ccu_nkm.h | 6 +++---
- drivers/clk/sunxi-ng/ccu_nkmp.h | 8 ++++----
- drivers/clk/sunxi-ng/ccu_nm.h | 6 +++---
- 9 files changed, 32 insertions(+), 32 deletions(-)
-
---- a/drivers/clk/sunxi-ng/ccu_div.h
-+++ b/drivers/clk/sunxi-ng/ccu_div.h
-@@ -20,7 +20,7 @@
- #include "ccu_mux.h"
-
- /**
-- * struct _ccu_div - Internal divider description
-+ * struct ccu_div_internal - Internal divider description
- * @shift: Bit offset of the divider in its register
- * @width: Width of the divider field in its register
- * @max: Maximum value allowed for that divider. This is the
-@@ -36,7 +36,7 @@
- * It is basically a wrapper around the clk_divider functions
- * arguments.
- */
--struct _ccu_div {
-+struct ccu_div_internal {
- u8 shift;
- u8 width;
-
-@@ -78,7 +78,7 @@ struct _ccu_div {
- struct ccu_div {
- u32 enable;
-
-- struct _ccu_div div;
-+ struct ccu_div_internal div;
- struct ccu_mux_internal mux;
- struct ccu_common common;
- };
---- a/drivers/clk/sunxi-ng/ccu_frac.c
-+++ b/drivers/clk/sunxi-ng/ccu_frac.c
-@@ -14,7 +14,7 @@
- #include "ccu_frac.h"
-
- bool ccu_frac_helper_is_enabled(struct ccu_common *common,
-- struct _ccu_frac *cf)
-+ struct ccu_frac_internal *cf)
- {
- if (!(common->features & CCU_FEATURE_FRACTIONAL))
- return false;
-@@ -23,7 +23,7 @@ bool ccu_frac_helper_is_enabled(struct c
- }
-
- void ccu_frac_helper_enable(struct ccu_common *common,
-- struct _ccu_frac *cf)
-+ struct ccu_frac_internal *cf)
- {
- unsigned long flags;
- u32 reg;
-@@ -38,7 +38,7 @@ void ccu_frac_helper_enable(struct ccu_c
- }
-
- void ccu_frac_helper_disable(struct ccu_common *common,
-- struct _ccu_frac *cf)
-+ struct ccu_frac_internal *cf)
- {
- unsigned long flags;
- u32 reg;
-@@ -53,7 +53,7 @@ void ccu_frac_helper_disable(struct ccu_
- }
-
- bool ccu_frac_helper_has_rate(struct ccu_common *common,
-- struct _ccu_frac *cf,
-+ struct ccu_frac_internal *cf,
- unsigned long rate)
- {
- if (!(common->features & CCU_FEATURE_FRACTIONAL))
-@@ -63,7 +63,7 @@ bool ccu_frac_helper_has_rate(struct ccu
- }
-
- unsigned long ccu_frac_helper_read_rate(struct ccu_common *common,
-- struct _ccu_frac *cf)
-+ struct ccu_frac_internal *cf)
- {
- u32 reg;
-
-@@ -84,7 +84,7 @@ unsigned long ccu_frac_helper_read_rate(
- }
-
- int ccu_frac_helper_set_rate(struct ccu_common *common,
-- struct _ccu_frac *cf,
-+ struct ccu_frac_internal *cf,
- unsigned long rate)
- {
- unsigned long flags;
---- a/drivers/clk/sunxi-ng/ccu_frac.h
-+++ b/drivers/clk/sunxi-ng/ccu_frac.h
-@@ -18,7 +18,7 @@
-
- #include "ccu_common.h"
-
--struct _ccu_frac {
-+struct ccu_frac_internal {
- u32 enable;
- u32 select;
-
-@@ -33,21 +33,21 @@ struct _ccu_frac {
- }
-
- bool ccu_frac_helper_is_enabled(struct ccu_common *common,
-- struct _ccu_frac *cf);
-+ struct ccu_frac_internal *cf);
- void ccu_frac_helper_enable(struct ccu_common *common,
-- struct _ccu_frac *cf);
-+ struct ccu_frac_internal *cf);
- void ccu_frac_helper_disable(struct ccu_common *common,
-- struct _ccu_frac *cf);
-+ struct ccu_frac_internal *cf);
-
- bool ccu_frac_helper_has_rate(struct ccu_common *common,
-- struct _ccu_frac *cf,
-+ struct ccu_frac_internal *cf,
- unsigned long rate);
-
- unsigned long ccu_frac_helper_read_rate(struct ccu_common *common,
-- struct _ccu_frac *cf);
-+ struct ccu_frac_internal *cf);
-
- int ccu_frac_helper_set_rate(struct ccu_common *common,
-- struct _ccu_frac *cf,
-+ struct ccu_frac_internal *cf,
- unsigned long rate);
-
- #endif /* _CCU_FRAC_H_ */
---- a/drivers/clk/sunxi-ng/ccu_mp.h
-+++ b/drivers/clk/sunxi-ng/ccu_mp.h
-@@ -29,8 +29,8 @@
- struct ccu_mp {
- u32 enable;
-
-- struct _ccu_div m;
-- struct _ccu_div p;
-+ struct ccu_div_internal m;
-+ struct ccu_div_internal p;
- struct ccu_mux_internal mux;
- struct ccu_common common;
- };
---- a/drivers/clk/sunxi-ng/ccu_mult.h
-+++ b/drivers/clk/sunxi-ng/ccu_mult.h
-@@ -4,7 +4,7 @@
- #include "ccu_common.h"
- #include "ccu_mux.h"
-
--struct _ccu_mult {
-+struct ccu_mult_internal {
- u8 shift;
- u8 width;
- };
-@@ -18,7 +18,7 @@ struct _ccu_mult {
- struct ccu_mult {
- u32 enable;
-
-- struct _ccu_mult mult;
-+ struct ccu_mult_internal mult;
- struct ccu_mux_internal mux;
- struct ccu_common common;
- };
---- a/drivers/clk/sunxi-ng/ccu_nk.h
-+++ b/drivers/clk/sunxi-ng/ccu_nk.h
-@@ -30,8 +30,8 @@ struct ccu_nk {
- u32 enable;
- u32 lock;
-
-- struct _ccu_mult n;
-- struct _ccu_mult k;
-+ struct ccu_mult_internal n;
-+ struct ccu_mult_internal k;
-
- unsigned int fixed_post_div;
-
---- a/drivers/clk/sunxi-ng/ccu_nkm.h
-+++ b/drivers/clk/sunxi-ng/ccu_nkm.h
-@@ -29,9 +29,9 @@ struct ccu_nkm {
- u32 enable;
- u32 lock;
-
-- struct _ccu_mult n;
-- struct _ccu_mult k;
-- struct _ccu_div m;
-+ struct ccu_mult_internal n;
-+ struct ccu_mult_internal k;
-+ struct ccu_div_internal m;
- struct ccu_mux_internal mux;
-
- struct ccu_common common;
---- a/drivers/clk/sunxi-ng/ccu_nkmp.h
-+++ b/drivers/clk/sunxi-ng/ccu_nkmp.h
-@@ -29,10 +29,10 @@ struct ccu_nkmp {
- u32 enable;
- u32 lock;
-
-- struct _ccu_mult n;
-- struct _ccu_mult k;
-- struct _ccu_div m;
-- struct _ccu_div p;
-+ struct ccu_mult_internal n;
-+ struct ccu_mult_internal k;
-+ struct ccu_div_internal m;
-+ struct ccu_div_internal p;
-
- struct ccu_common common;
- };
---- a/drivers/clk/sunxi-ng/ccu_nm.h
-+++ b/drivers/clk/sunxi-ng/ccu_nm.h
-@@ -30,9 +30,9 @@ struct ccu_nm {
- u32 enable;
- u32 lock;
-
-- struct _ccu_mult n;
-- struct _ccu_div m;
-- struct _ccu_frac frac;
-+ struct ccu_mult_internal n;
-+ struct ccu_div_internal m;
-+ struct ccu_frac_internal frac;
-
- struct ccu_common common;
- };
diff --git a/target/linux/sunxi/patches-4.9/0003-clk-sunxi-ng-Remove-the-use-of-rational-computations.patch b/target/linux/sunxi/patches-4.9/0003-clk-sunxi-ng-Remove-the-use-of-rational-computations.patch
deleted file mode 100644
index 9146a2bb42..0000000000
--- a/target/linux/sunxi/patches-4.9/0003-clk-sunxi-ng-Remove-the-use-of-rational-computations.patch
+++ /dev/null
@@ -1,239 +0,0 @@
-From ee28648cb2b4d4ab5c2eb8199ea86675fe19016b Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 29 Sep 2016 22:53:12 +0200
-Subject: clk: sunxi-ng: Remove the use of rational computations
-
-While the rational library works great, it doesn't really allow us to add
-more constraints, like the minimum.
-
-Remove that in order to be able to deal with the constraints we'll need.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
----
- drivers/clk/sunxi-ng/Kconfig | 3 ---
- drivers/clk/sunxi-ng/ccu_nkm.c | 31 ++++++++++++-----------
- drivers/clk/sunxi-ng/ccu_nkmp.c | 37 ++++++++++++++--------------
- drivers/clk/sunxi-ng/ccu_nm.c | 54 +++++++++++++++++++++++++++++++----------
- 4 files changed, 74 insertions(+), 51 deletions(-)
-
---- a/drivers/clk/sunxi-ng/Kconfig
-+++ b/drivers/clk/sunxi-ng/Kconfig
-@@ -36,17 +36,14 @@ config SUNXI_CCU_NK
-
- config SUNXI_CCU_NKM
- bool
-- select RATIONAL
- select SUNXI_CCU_GATE
-
- config SUNXI_CCU_NKMP
- bool
-- select RATIONAL
- select SUNXI_CCU_GATE
-
- config SUNXI_CCU_NM
- bool
-- select RATIONAL
- select SUNXI_CCU_FRAC
- select SUNXI_CCU_GATE
-
---- a/drivers/clk/sunxi-ng/ccu_nkm.c
-+++ b/drivers/clk/sunxi-ng/ccu_nkm.c
-@@ -9,7 +9,6 @@
- */
-
- #include <linux/clk-provider.h>
--#include <linux/rational.h>
-
- #include "ccu_gate.h"
- #include "ccu_nkm.h"
-@@ -28,21 +27,21 @@ static void ccu_nkm_find_best(unsigned l
- unsigned long _n, _k, _m;
-
- for (_k = 1; _k <= nkm->max_k; _k++) {
-- unsigned long tmp_rate;
--
-- rational_best_approximation(rate / _k, parent,
-- nkm->max_n, nkm->max_m, &_n, &_m);
--
-- tmp_rate = parent * _n * _k / _m;
--
-- if (tmp_rate > rate)
-- continue;
--
-- if ((rate - tmp_rate) < (rate - best_rate)) {
-- best_rate = tmp_rate;
-- best_n = _n;
-- best_k = _k;
-- best_m = _m;
-+ for (_n = 1; _n <= nkm->max_n; _n++) {
-+ for (_m = 1; _n <= nkm->max_m; _m++) {
-+ unsigned long tmp_rate;
-+
-+ tmp_rate = parent * _n * _k / _m;
-+
-+ if (tmp_rate > rate)
-+ continue;
-+ if ((rate - tmp_rate) < (rate - best_rate)) {
-+ best_rate = tmp_rate;
-+ best_n = _n;
-+ best_k = _k;
-+ best_m = _m;
-+ }
-+ }
- }
- }
-
---- a/drivers/clk/sunxi-ng/ccu_nkmp.c
-+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
-@@ -9,7 +9,6 @@
- */
-
- #include <linux/clk-provider.h>
--#include <linux/rational.h>
-
- #include "ccu_gate.h"
- #include "ccu_nkmp.h"
-@@ -29,24 +28,24 @@ static void ccu_nkmp_find_best(unsigned
- unsigned long _n, _k, _m, _p;
-
- for (_k = 1; _k <= nkmp->max_k; _k++) {
-- for (_p = 1; _p <= nkmp->max_p; _p <<= 1) {
-- unsigned long tmp_rate;
--
-- rational_best_approximation(rate / _k, parent / _p,
-- nkmp->max_n, nkmp->max_m,
-- &_n, &_m);
--
-- tmp_rate = parent * _n * _k / (_m * _p);
--
-- if (tmp_rate > rate)
-- continue;
--
-- if ((rate - tmp_rate) < (rate - best_rate)) {
-- best_rate = tmp_rate;
-- best_n = _n;
-- best_k = _k;
-- best_m = _m;
-- best_p = _p;
-+ for (_n = 1; _n <= nkmp->max_n; _n++) {
-+ for (_m = 1; _n <= nkmp->max_m; _m++) {
-+ for (_p = 1; _p <= nkmp->max_p; _p <<= 1) {
-+ unsigned long tmp_rate;
-+
-+ tmp_rate = parent * _n * _k / (_m * _p);
-+
-+ if (tmp_rate > rate)
-+ continue;
-+
-+ if ((rate - tmp_rate) < (rate - best_rate)) {
-+ best_rate = tmp_rate;
-+ best_n = _n;
-+ best_k = _k;
-+ best_m = _m;
-+ best_p = _p;
-+ }
-+ }
- }
- }
- }
---- a/drivers/clk/sunxi-ng/ccu_nm.c
-+++ b/drivers/clk/sunxi-ng/ccu_nm.c
-@@ -9,12 +9,42 @@
- */
-
- #include <linux/clk-provider.h>
--#include <linux/rational.h>
-
- #include "ccu_frac.h"
- #include "ccu_gate.h"
- #include "ccu_nm.h"
-
-+struct _ccu_nm {
-+ unsigned long n, max_n;
-+ unsigned long m, max_m;
-+};
-+
-+static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
-+ struct _ccu_nm *nm)
-+{
-+ unsigned long best_rate = 0;
-+ unsigned long best_n = 0, best_m = 0;
-+ unsigned long _n, _m;
-+
-+ for (_n = 1; _n <= nm->max_n; _n++) {
-+ for (_m = 1; _n <= nm->max_m; _m++) {
-+ unsigned long tmp_rate = parent * _n / _m;
-+
-+ if (tmp_rate > rate)
-+ continue;
-+
-+ if ((rate - tmp_rate) < (rate - best_rate)) {
-+ best_rate = tmp_rate;
-+ best_n = _n;
-+ best_m = _m;
-+ }
-+ }
-+ }
-+
-+ nm->n = best_n;
-+ nm->m = best_m;
-+}
-+
- static void ccu_nm_disable(struct clk_hw *hw)
- {
- struct ccu_nm *nm = hw_to_ccu_nm(hw);
-@@ -61,24 +91,22 @@ static long ccu_nm_round_rate(struct clk
- unsigned long *parent_rate)
- {
- struct ccu_nm *nm = hw_to_ccu_nm(hw);
-- unsigned long max_n, max_m;
-- unsigned long n, m;
-+ struct _ccu_nm _nm;
-
-- max_n = 1 << nm->n.width;
-- max_m = nm->m.max ?: 1 << nm->m.width;
-+ _nm.max_n = 1 << nm->n.width;
-+ _nm.max_m = nm->m.max ?: 1 << nm->m.width;
-
-- rational_best_approximation(rate, *parent_rate, max_n, max_m, &n, &m);
-+ ccu_nm_find_best(*parent_rate, rate, &_nm);
-
-- return *parent_rate * n / m;
-+ return *parent_rate * _nm.n / _nm.m;
- }
-
- static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
- {
- struct ccu_nm *nm = hw_to_ccu_nm(hw);
-+ struct _ccu_nm _nm;
- unsigned long flags;
-- unsigned long max_n, max_m;
-- unsigned long n, m;
- u32 reg;
-
- if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate))
-@@ -86,10 +114,10 @@ static int ccu_nm_set_rate(struct clk_hw
- else
- ccu_frac_helper_disable(&nm->common, &nm->frac);
-
-- max_n = 1 << nm->n.width;
-- max_m = nm->m.max ?: 1 << nm->m.width;
-+ _nm.max_n = 1 << nm->n.width;
-+ _nm.max_m = nm->m.max ?: 1 << nm->m.width;
-
-- rational_best_approximation(rate, parent_rate, max_n, max_m, &n, &m);
-+ ccu_nm_find_best(parent_rate, rate, &_nm);
-
- spin_lock_irqsave(nm->common.lock, flags);
-
-@@ -97,7 +125,7 @@ static int ccu_nm_set_rate(struct clk_hw
- reg &= ~GENMASK(nm->n.width + nm->n.shift - 1, nm->n.shift);
- reg &= ~GENMASK(nm->m.width + nm->m.shift - 1, nm->m.shift);
-
-- writel(reg | ((m - 1) << nm->m.shift) | ((n - 1) << nm->n.shift),
-+ writel(reg | ((_nm.m - 1) << nm->m.shift) | ((_nm.n - 1) << nm->n.shift),
- nm->common.base + nm->common.reg);
-
- spin_unlock_irqrestore(nm->common.lock, flags);
diff --git a/target/linux/sunxi/patches-4.9/0004-clk-sunxi-ng-Finish-to-convert-to-structures-for-arg.patch b/target/linux/sunxi/patches-4.9/0004-clk-sunxi-ng-Finish-to-convert-to-structures-for-arg.patch
deleted file mode 100644
index 4b91892b81..0000000000
--- a/target/linux/sunxi/patches-4.9/0004-clk-sunxi-ng-Finish-to-convert-to-structures-for-arg.patch
+++ /dev/null
@@ -1,182 +0,0 @@
-From b8302c7267dedaeeb1bf38143f099defbf16dce8 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 29 Sep 2016 23:50:21 +0200
-Subject: clk: sunxi-ng: Finish to convert to structures for arguments
-
-Some clocks still use an explicit list of arguments, which make it a bit
-more tedious to add new parameters.
-
-Convert those over to a structure pointer argument to add as many
-arguments as possible without having to many noise in our patches, or a
-very long list of arguments.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
----
- drivers/clk/sunxi-ng/ccu_mult.c | 28 ++++++++++++++++++++--------
- drivers/clk/sunxi-ng/ccu_nk.c | 39 ++++++++++++++++++++++-----------------
- 2 files changed, 42 insertions(+), 25 deletions(-)
-
---- a/drivers/clk/sunxi-ng/ccu_mult.c
-+++ b/drivers/clk/sunxi-ng/ccu_mult.c
-@@ -13,10 +13,20 @@
- #include "ccu_gate.h"
- #include "ccu_mult.h"
-
-+struct _ccu_mult {
-+ unsigned long mult, max;
-+};
-+
- static void ccu_mult_find_best(unsigned long parent, unsigned long rate,
-- unsigned int max_n, unsigned int *n)
-+ struct _ccu_mult *mult)
- {
-- *n = rate / parent;
-+ int _mult;
-+
-+ _mult = rate / parent;
-+ if (_mult > mult->max)
-+ _mult = mult->max;
-+
-+ mult->mult = _mult;
- }
-
- static unsigned long ccu_mult_round_rate(struct ccu_mux_internal *mux,
-@@ -25,11 +35,12 @@ static unsigned long ccu_mult_round_rate
- void *data)
- {
- struct ccu_mult *cm = data;
-- unsigned int n;
-+ struct _ccu_mult _cm;
-
-- ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n);
-+ _cm.max = 1 << cm->mult.width;
-+ ccu_mult_find_best(parent_rate, rate, &_cm);
-
-- return parent_rate * n;
-+ return parent_rate * _cm.mult;
- }
-
- static void ccu_mult_disable(struct clk_hw *hw)
-@@ -83,21 +94,22 @@ static int ccu_mult_set_rate(struct clk_
- unsigned long parent_rate)
- {
- struct ccu_mult *cm = hw_to_ccu_mult(hw);
-+ struct _ccu_mult _cm;
- unsigned long flags;
-- unsigned int n;
- u32 reg;
-
- ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
- &parent_rate);
-
-- ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n);
-+ _cm.max = 1 << cm->mult.width;
-+ ccu_mult_find_best(parent_rate, rate, &_cm);
-
- spin_lock_irqsave(cm->common.lock, flags);
-
- reg = readl(cm->common.base + cm->common.reg);
- reg &= ~GENMASK(cm->mult.width + cm->mult.shift - 1, cm->mult.shift);
-
-- writel(reg | ((n - 1) << cm->mult.shift),
-+ writel(reg | ((_cm.mult - 1) << cm->mult.shift),
- cm->common.base + cm->common.reg);
-
- spin_unlock_irqrestore(cm->common.lock, flags);
---- a/drivers/clk/sunxi-ng/ccu_nk.c
-+++ b/drivers/clk/sunxi-ng/ccu_nk.c
-@@ -9,21 +9,24 @@
- */
-
- #include <linux/clk-provider.h>
--#include <linux/rational.h>
-
- #include "ccu_gate.h"
- #include "ccu_nk.h"
-
-+struct _ccu_nk {
-+ unsigned long n, max_n;
-+ unsigned long k, max_k;
-+};
-+
- static void ccu_nk_find_best(unsigned long parent, unsigned long rate,
-- unsigned int max_n, unsigned int max_k,
-- unsigned int *n, unsigned int *k)
-+ struct _ccu_nk *nk)
- {
- unsigned long best_rate = 0;
- unsigned int best_k = 0, best_n = 0;
- unsigned int _k, _n;
-
-- for (_k = 1; _k <= max_k; _k++) {
-- for (_n = 1; _n <= max_n; _n++) {
-+ for (_k = 1; _k <= nk->max_k; _k++) {
-+ for (_n = 1; _n <= nk->max_n; _n++) {
- unsigned long tmp_rate = parent * _n * _k;
-
- if (tmp_rate > rate)
-@@ -37,8 +40,8 @@ static void ccu_nk_find_best(unsigned lo
- }
- }
-
-- *k = best_k;
-- *n = best_n;
-+ nk->k = best_k;
-+ nk->n = best_n;
- }
-
- static void ccu_nk_disable(struct clk_hw *hw)
-@@ -89,16 +92,17 @@ static long ccu_nk_round_rate(struct clk
- unsigned long *parent_rate)
- {
- struct ccu_nk *nk = hw_to_ccu_nk(hw);
-- unsigned int n, k;
-+ struct _ccu_nk _nk;
-
- if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
- rate *= nk->fixed_post_div;
-
-- ccu_nk_find_best(*parent_rate, rate,
-- 1 << nk->n.width, 1 << nk->k.width,
-- &n, &k);
-+ _nk.max_n = 1 << nk->n.width;
-+ _nk.max_k = 1 << nk->k.width;
-+
-+ ccu_nk_find_best(*parent_rate, rate, &_nk);
-+ rate = *parent_rate * _nk.n * _nk.k;
-
-- rate = *parent_rate * n * k;
- if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
- rate = rate / nk->fixed_post_div;
-
-@@ -110,15 +114,16 @@ static int ccu_nk_set_rate(struct clk_hw
- {
- struct ccu_nk *nk = hw_to_ccu_nk(hw);
- unsigned long flags;
-- unsigned int n, k;
-+ struct _ccu_nk _nk;
- u32 reg;
-
- if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
- rate = rate * nk->fixed_post_div;
-
-- ccu_nk_find_best(parent_rate, rate,
-- 1 << nk->n.width, 1 << nk->k.width,
-- &n, &k);
-+ _nk.max_n = 1 << nk->n.width;
-+ _nk.max_k = 1 << nk->k.width;
-+
-+ ccu_nk_find_best(parent_rate, rate, &_nk);
-
- spin_lock_irqsave(nk->common.lock, flags);
-
-@@ -126,7 +131,7 @@ static int ccu_nk_set_rate(struct clk_hw
- reg &= ~GENMASK(nk->n.width + nk->n.shift - 1, nk->n.shift);
- reg &= ~GENMASK(nk->k.width + nk->k.shift - 1, nk->k.shift);
-
-- writel(reg | ((k - 1) << nk->k.shift) | ((n - 1) << nk->n.shift),
-+ writel(reg | ((_nk.k - 1) << nk->k.shift) | ((_nk.n - 1) << nk->n.shift),
- nk->common.base + nk->common.reg);
-
- spin_unlock_irqrestore(nk->common.lock, flags);
diff --git a/target/linux/sunxi/patches-4.9/0005-clk-sunxi-ng-Add-minimums-for-all-the-relevant-struc.patch b/target/linux/sunxi/patches-4.9/0005-clk-sunxi-ng-Add-minimums-for-all-the-relevant-struc.patch
deleted file mode 100644
index 0165ade138..0000000000
--- a/target/linux/sunxi/patches-4.9/0005-clk-sunxi-ng-Add-minimums-for-all-the-relevant-struc.patch
+++ /dev/null
@@ -1,256 +0,0 @@
-From 6e0d50daa97f4bf9706e343b4f71171e88921209 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 29 Sep 2016 22:57:26 +0200
-Subject: clk: sunxi-ng: Add minimums for all the relevant structures and
- clocks
-
-Modify the current clocks we have to be able to specify the minimum for
-each clocks we support, just like we support the max.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
----
- drivers/clk/sunxi-ng/ccu_mult.c | 7 ++++++-
- drivers/clk/sunxi-ng/ccu_nk.c | 12 ++++++++----
- drivers/clk/sunxi-ng/ccu_nkm.c | 18 ++++++++++++------
- drivers/clk/sunxi-ng/ccu_nkmp.c | 24 ++++++++++++++++--------
- drivers/clk/sunxi-ng/ccu_nm.c | 12 ++++++++----
- 5 files changed, 50 insertions(+), 23 deletions(-)
-
---- a/drivers/clk/sunxi-ng/ccu_mult.c
-+++ b/drivers/clk/sunxi-ng/ccu_mult.c
-@@ -14,7 +14,7 @@
- #include "ccu_mult.h"
-
- struct _ccu_mult {
-- unsigned long mult, max;
-+ unsigned long mult, min, max;
- };
-
- static void ccu_mult_find_best(unsigned long parent, unsigned long rate,
-@@ -23,6 +23,9 @@ static void ccu_mult_find_best(unsigned
- int _mult;
-
- _mult = rate / parent;
-+ if (_mult < mult->min)
-+ _mult = mult->min;
-+
- if (_mult > mult->max)
- _mult = mult->max;
-
-@@ -37,6 +40,7 @@ static unsigned long ccu_mult_round_rate
- struct ccu_mult *cm = data;
- struct _ccu_mult _cm;
-
-+ _cm.min = 1;
- _cm.max = 1 << cm->mult.width;
- ccu_mult_find_best(parent_rate, rate, &_cm);
-
-@@ -101,6 +105,7 @@ static int ccu_mult_set_rate(struct clk_
- ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
- &parent_rate);
-
-+ _cm.min = 1;
- _cm.max = 1 << cm->mult.width;
- ccu_mult_find_best(parent_rate, rate, &_cm);
-
---- a/drivers/clk/sunxi-ng/ccu_nk.c
-+++ b/drivers/clk/sunxi-ng/ccu_nk.c
-@@ -14,8 +14,8 @@
- #include "ccu_nk.h"
-
- struct _ccu_nk {
-- unsigned long n, max_n;
-- unsigned long k, max_k;
-+ unsigned long n, min_n, max_n;
-+ unsigned long k, min_k, max_k;
- };
-
- static void ccu_nk_find_best(unsigned long parent, unsigned long rate,
-@@ -25,8 +25,8 @@ static void ccu_nk_find_best(unsigned lo
- unsigned int best_k = 0, best_n = 0;
- unsigned int _k, _n;
-
-- for (_k = 1; _k <= nk->max_k; _k++) {
-- for (_n = 1; _n <= nk->max_n; _n++) {
-+ for (_k = nk->min_k; _k <= nk->max_k; _k++) {
-+ for (_n = nk->min_n; _n <= nk->max_n; _n++) {
- unsigned long tmp_rate = parent * _n * _k;
-
- if (tmp_rate > rate)
-@@ -97,7 +97,9 @@ static long ccu_nk_round_rate(struct clk
- if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
- rate *= nk->fixed_post_div;
-
-+ _nk.min_n = 1;
- _nk.max_n = 1 << nk->n.width;
-+ _nk.min_k = 1;
- _nk.max_k = 1 << nk->k.width;
-
- ccu_nk_find_best(*parent_rate, rate, &_nk);
-@@ -120,7 +122,9 @@ static int ccu_nk_set_rate(struct clk_hw
- if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
- rate = rate * nk->fixed_post_div;
-
-+ _nk.min_n = 1;
- _nk.max_n = 1 << nk->n.width;
-+ _nk.min_k = 1;
- _nk.max_k = 1 << nk->k.width;
-
- ccu_nk_find_best(parent_rate, rate, &_nk);
---- a/drivers/clk/sunxi-ng/ccu_nkm.c
-+++ b/drivers/clk/sunxi-ng/ccu_nkm.c
-@@ -14,9 +14,9 @@
- #include "ccu_nkm.h"
-
- struct _ccu_nkm {
-- unsigned long n, max_n;
-- unsigned long k, max_k;
-- unsigned long m, max_m;
-+ unsigned long n, min_n, max_n;
-+ unsigned long k, min_k, max_k;
-+ unsigned long m, min_m, max_m;
- };
-
- static void ccu_nkm_find_best(unsigned long parent, unsigned long rate,
-@@ -26,9 +26,9 @@ static void ccu_nkm_find_best(unsigned l
- unsigned long best_n = 0, best_k = 0, best_m = 0;
- unsigned long _n, _k, _m;
-
-- for (_k = 1; _k <= nkm->max_k; _k++) {
-- for (_n = 1; _n <= nkm->max_n; _n++) {
-- for (_m = 1; _n <= nkm->max_m; _m++) {
-+ for (_k = nkm->min_k; _k <= nkm->max_k; _k++) {
-+ for (_n = nkm->min_n; _n <= nkm->max_n; _n++) {
-+ for (_m = nkm->min_m; _m <= nkm->max_m; _m++) {
- unsigned long tmp_rate;
-
- tmp_rate = parent * _n * _k / _m;
-@@ -100,8 +100,11 @@ static unsigned long ccu_nkm_round_rate(
- struct ccu_nkm *nkm = data;
- struct _ccu_nkm _nkm;
-
-+ _nkm.min_n = 1;
- _nkm.max_n = 1 << nkm->n.width;
-+ _nkm.min_k = 1;
- _nkm.max_k = 1 << nkm->k.width;
-+ _nkm.min_m = 1;
- _nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
-
- ccu_nkm_find_best(parent_rate, rate, &_nkm);
-@@ -126,8 +129,11 @@ static int ccu_nkm_set_rate(struct clk_h
- unsigned long flags;
- u32 reg;
-
-+ _nkm.min_n = 1;
- _nkm.max_n = 1 << nkm->n.width;
-+ _nkm.min_k = 1;
- _nkm.max_k = 1 << nkm->k.width;
-+ _nkm.min_m = 1;
- _nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
-
- ccu_nkm_find_best(parent_rate, rate, &_nkm);
---- a/drivers/clk/sunxi-ng/ccu_nkmp.c
-+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
-@@ -14,10 +14,10 @@
- #include "ccu_nkmp.h"
-
- struct _ccu_nkmp {
-- unsigned long n, max_n;
-- unsigned long k, max_k;
-- unsigned long m, max_m;
-- unsigned long p, max_p;
-+ unsigned long n, min_n, max_n;
-+ unsigned long k, min_k, max_k;
-+ unsigned long m, min_m, max_m;
-+ unsigned long p, min_p, max_p;
- };
-
- static void ccu_nkmp_find_best(unsigned long parent, unsigned long rate,
-@@ -27,10 +27,10 @@ static void ccu_nkmp_find_best(unsigned
- unsigned long best_n = 0, best_k = 0, best_m = 0, best_p = 0;
- unsigned long _n, _k, _m, _p;
-
-- for (_k = 1; _k <= nkmp->max_k; _k++) {
-- for (_n = 1; _n <= nkmp->max_n; _n++) {
-- for (_m = 1; _n <= nkmp->max_m; _m++) {
-- for (_p = 1; _p <= nkmp->max_p; _p <<= 1) {
-+ for (_k = nkmp->min_k; _k <= nkmp->max_k; _k++) {
-+ for (_n = nkmp->min_n; _n <= nkmp->max_n; _n++) {
-+ for (_m = nkmp->min_m; _m <= nkmp->max_m; _m++) {
-+ for (_p = nkmp->min_p; _p <= nkmp->max_p; _p <<= 1) {
- unsigned long tmp_rate;
-
- tmp_rate = parent * _n * _k / (_m * _p);
-@@ -107,9 +107,13 @@ static long ccu_nkmp_round_rate(struct c
- struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
- struct _ccu_nkmp _nkmp;
-
-+ _nkmp.min_n = 1;
- _nkmp.max_n = 1 << nkmp->n.width;
-+ _nkmp.min_k = 1;
- _nkmp.max_k = 1 << nkmp->k.width;
-+ _nkmp.min_m = 1;
- _nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width;
-+ _nkmp.min_p = 1;
- _nkmp.max_p = nkmp->p.max ?: 1 << ((1 << nkmp->p.width) - 1);
-
- ccu_nkmp_find_best(*parent_rate, rate, &_nkmp);
-@@ -125,9 +129,13 @@ static int ccu_nkmp_set_rate(struct clk_
- unsigned long flags;
- u32 reg;
-
-+ _nkmp.min_n = 1;
- _nkmp.max_n = 1 << nkmp->n.width;
-+ _nkmp.min_k = 1;
- _nkmp.max_k = 1 << nkmp->k.width;
-+ _nkmp.min_m = 1;
- _nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width;
-+ _nkmp.min_p = 1;
- _nkmp.max_p = nkmp->p.max ?: 1 << ((1 << nkmp->p.width) - 1);
-
- ccu_nkmp_find_best(parent_rate, rate, &_nkmp);
---- a/drivers/clk/sunxi-ng/ccu_nm.c
-+++ b/drivers/clk/sunxi-ng/ccu_nm.c
-@@ -15,8 +15,8 @@
- #include "ccu_nm.h"
-
- struct _ccu_nm {
-- unsigned long n, max_n;
-- unsigned long m, max_m;
-+ unsigned long n, min_n, max_n;
-+ unsigned long m, min_m, max_m;
- };
-
- static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
-@@ -26,8 +26,8 @@ static void ccu_nm_find_best(unsigned lo
- unsigned long best_n = 0, best_m = 0;
- unsigned long _n, _m;
-
-- for (_n = 1; _n <= nm->max_n; _n++) {
-- for (_m = 1; _n <= nm->max_m; _m++) {
-+ for (_n = nm->min_n; _n <= nm->max_n; _n++) {
-+ for (_m = nm->min_m; _m <= nm->max_m; _m++) {
- unsigned long tmp_rate = parent * _n / _m;
-
- if (tmp_rate > rate)
-@@ -93,7 +93,9 @@ static long ccu_nm_round_rate(struct clk
- struct ccu_nm *nm = hw_to_ccu_nm(hw);
- struct _ccu_nm _nm;
-
-+ _nm.min_n = 1;
- _nm.max_n = 1 << nm->n.width;
-+ _nm.min_m = 1;
- _nm.max_m = nm->m.max ?: 1 << nm->m.width;
-
- ccu_nm_find_best(*parent_rate, rate, &_nm);
-@@ -114,7 +116,9 @@ static int ccu_nm_set_rate(struct clk_hw
- else
- ccu_frac_helper_disable(&nm->common, &nm->frac);
-
-+ _nm.min_n = 1;
- _nm.max_n = 1 << nm->n.width;
-+ _nm.min_m = 1;
- _nm.max_m = nm->m.max ?: 1 << nm->m.width;
-
- ccu_nm_find_best(parent_rate, rate, &_nm);
diff --git a/target/linux/sunxi/patches-4.9/0006-clk-sunxi-ng-Implement-minimum-for-multipliers.patch b/target/linux/sunxi/patches-4.9/0006-clk-sunxi-ng-Implement-minimum-for-multipliers.patch
deleted file mode 100644
index 668d596493..0000000000
--- a/target/linux/sunxi/patches-4.9/0006-clk-sunxi-ng-Implement-minimum-for-multipliers.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From 2beaa601c849e72683a2dd0fe6fd77763f19f051 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Fri, 30 Sep 2016 22:16:51 +0200
-Subject: clk: sunxi-ng: Implement minimum for multipliers
-
-Allow the CCU drivers to specify a multiplier for their clocks.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
----
- drivers/clk/sunxi-ng/ccu_mult.c | 2 +-
- drivers/clk/sunxi-ng/ccu_mult.h | 13 +++++++++----
- drivers/clk/sunxi-ng/ccu_nk.c | 8 ++++----
- drivers/clk/sunxi-ng/ccu_nkm.c | 8 ++++----
- drivers/clk/sunxi-ng/ccu_nkmp.c | 4 ++--
- drivers/clk/sunxi-ng/ccu_nm.c | 2 +-
- 6 files changed, 21 insertions(+), 16 deletions(-)
-
---- a/drivers/clk/sunxi-ng/ccu_mult.c
-+++ b/drivers/clk/sunxi-ng/ccu_mult.c
-@@ -105,7 +105,7 @@ static int ccu_mult_set_rate(struct clk_
- ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
- &parent_rate);
-
-- _cm.min = 1;
-+ _cm.min = cm->mult.min;
- _cm.max = 1 << cm->mult.width;
- ccu_mult_find_best(parent_rate, rate, &_cm);
-
---- a/drivers/clk/sunxi-ng/ccu_mult.h
-+++ b/drivers/clk/sunxi-ng/ccu_mult.h
-@@ -7,14 +7,19 @@
- struct ccu_mult_internal {
- u8 shift;
- u8 width;
-+ u8 min;
- };
-
--#define _SUNXI_CCU_MULT(_shift, _width) \
-- { \
-- .shift = _shift, \
-- .width = _width, \
-+#define _SUNXI_CCU_MULT_MIN(_shift, _width, _min) \
-+ { \
-+ .shift = _shift, \
-+ .width = _width, \
-+ .min = _min, \
- }
-
-+#define _SUNXI_CCU_MULT(_shift, _width) \
-+ _SUNXI_CCU_MULT_MIN(_shift, _width, 1)
-+
- struct ccu_mult {
- u32 enable;
-
---- a/drivers/clk/sunxi-ng/ccu_nk.c
-+++ b/drivers/clk/sunxi-ng/ccu_nk.c
-@@ -97,9 +97,9 @@ static long ccu_nk_round_rate(struct clk
- if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
- rate *= nk->fixed_post_div;
-
-- _nk.min_n = 1;
-+ _nk.min_n = nk->n.min;
- _nk.max_n = 1 << nk->n.width;
-- _nk.min_k = 1;
-+ _nk.min_k = nk->k.min;
- _nk.max_k = 1 << nk->k.width;
-
- ccu_nk_find_best(*parent_rate, rate, &_nk);
-@@ -122,9 +122,9 @@ static int ccu_nk_set_rate(struct clk_hw
- if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
- rate = rate * nk->fixed_post_div;
-
-- _nk.min_n = 1;
-+ _nk.min_n = nk->n.min;
- _nk.max_n = 1 << nk->n.width;
-- _nk.min_k = 1;
-+ _nk.min_k = nk->k.min;
- _nk.max_k = 1 << nk->k.width;
-
- ccu_nk_find_best(parent_rate, rate, &_nk);
---- a/drivers/clk/sunxi-ng/ccu_nkm.c
-+++ b/drivers/clk/sunxi-ng/ccu_nkm.c
-@@ -100,9 +100,9 @@ static unsigned long ccu_nkm_round_rate(
- struct ccu_nkm *nkm = data;
- struct _ccu_nkm _nkm;
-
-- _nkm.min_n = 1;
-+ _nkm.min_n = nkm->n.min;
- _nkm.max_n = 1 << nkm->n.width;
-- _nkm.min_k = 1;
-+ _nkm.min_k = nkm->k.min;
- _nkm.max_k = 1 << nkm->k.width;
- _nkm.min_m = 1;
- _nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
-@@ -129,9 +129,9 @@ static int ccu_nkm_set_rate(struct clk_h
- unsigned long flags;
- u32 reg;
-
-- _nkm.min_n = 1;
-+ _nkm.min_n = nkm->n.min;
- _nkm.max_n = 1 << nkm->n.width;
-- _nkm.min_k = 1;
-+ _nkm.min_k = nkm->k.min;
- _nkm.max_k = 1 << nkm->k.width;
- _nkm.min_m = 1;
- _nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
---- a/drivers/clk/sunxi-ng/ccu_nkmp.c
-+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
-@@ -107,9 +107,9 @@ static long ccu_nkmp_round_rate(struct c
- struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
- struct _ccu_nkmp _nkmp;
-
-- _nkmp.min_n = 1;
-+ _nkmp.min_n = nkmp->n.min;
- _nkmp.max_n = 1 << nkmp->n.width;
-- _nkmp.min_k = 1;
-+ _nkmp.min_k = nkmp->k.min;
- _nkmp.max_k = 1 << nkmp->k.width;
- _nkmp.min_m = 1;
- _nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width;
---- a/drivers/clk/sunxi-ng/ccu_nm.c
-+++ b/drivers/clk/sunxi-ng/ccu_nm.c
-@@ -93,7 +93,7 @@ static long ccu_nm_round_rate(struct clk
- struct ccu_nm *nm = hw_to_ccu_nm(hw);
- struct _ccu_nm _nm;
-
-- _nm.min_n = 1;
-+ _nm.min_n = nm->n.min;
- _nm.max_n = 1 << nm->n.width;
- _nm.min_m = 1;
- _nm.max_m = nm->m.max ?: 1 << nm->m.width;
diff --git a/target/linux/sunxi/patches-4.9/0007-clk-sunxi-ng-Add-A64-clocks.patch b/target/linux/sunxi/patches-4.9/0007-clk-sunxi-ng-Add-A64-clocks.patch
deleted file mode 100644
index 1039a83b41..0000000000
--- a/target/linux/sunxi/patches-4.9/0007-clk-sunxi-ng-Add-A64-clocks.patch
+++ /dev/null
@@ -1,1295 +0,0 @@
-From c6a0637460c29799f1e63a6a4a65bda22caf4a54 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Wed, 6 Jul 2016 08:31:34 +0200
-Subject: clk: sunxi-ng: Add A64 clocks
-
-Add the A64 CCU clocks set.
-
-Acked-by: Rob Herring <robh@kernel.org>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- .../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
- drivers/clk/sunxi-ng/Kconfig | 11 +
- drivers/clk/sunxi-ng/Makefile | 1 +
- drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 915 +++++++++++++++++++++
- drivers/clk/sunxi-ng/ccu-sun50i-a64.h | 72 ++
- include/dt-bindings/clock/sun50i-a64-ccu.h | 134 +++
- include/dt-bindings/reset/sun50i-a64-ccu.h | 98 +++
- 7 files changed, 1232 insertions(+)
- create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.c
- create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.h
- create mode 100644 include/dt-bindings/clock/sun50i-a64-ccu.h
- create mode 100644 include/dt-bindings/reset/sun50i-a64-ccu.h
-
---- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
-+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
-@@ -7,6 +7,7 @@ Required properties :
- - "allwinner,sun8i-a23-ccu"
- - "allwinner,sun8i-a33-ccu"
- - "allwinner,sun8i-h3-ccu"
-+ - "allwinner,sun50i-a64-ccu"
-
- - reg: Must contain the registers base address and length
- - clocks: phandle to the oscillators feeding the CCU. Two are needed:
---- a/drivers/clk/sunxi-ng/Kconfig
-+++ b/drivers/clk/sunxi-ng/Kconfig
-@@ -54,6 +54,17 @@ config SUNXI_CCU_MP
-
- # SoC Drivers
-
-+config SUN50I_A64_CCU
-+ bool "Support for the Allwinner A64 CCU"
-+ select SUNXI_CCU_DIV
-+ select SUNXI_CCU_NK
-+ select SUNXI_CCU_NKM
-+ select SUNXI_CCU_NKMP
-+ select SUNXI_CCU_NM
-+ select SUNXI_CCU_MP
-+ select SUNXI_CCU_PHASE
-+ default ARM64 && ARCH_SUNXI
-+
- config SUN6I_A31_CCU
- bool "Support for the Allwinner A31/A31s CCU"
- select SUNXI_CCU_DIV
---- a/drivers/clk/sunxi-ng/Makefile
-+++ b/drivers/clk/sunxi-ng/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_SUNXI_CCU_NM) += ccu_nm.o
- obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
-
- # SoC support
-+obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
- obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
- obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
- obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
---- /dev/null
-+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
-@@ -0,0 +1,915 @@
-+/*
-+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of_address.h>
-+#include <linux/platform_device.h>
-+
-+#include "ccu_common.h"
-+#include "ccu_reset.h"
-+
-+#include "ccu_div.h"
-+#include "ccu_gate.h"
-+#include "ccu_mp.h"
-+#include "ccu_mult.h"
-+#include "ccu_nk.h"
-+#include "ccu_nkm.h"
-+#include "ccu_nkmp.h"
-+#include "ccu_nm.h"
-+#include "ccu_phase.h"
-+
-+#include "ccu-sun50i-a64.h"
-+
-+static struct ccu_nkmp pll_cpux_clk = {
-+ .enable = BIT(31),
-+ .lock = BIT(28),
-+ .n = _SUNXI_CCU_MULT(8, 5),
-+ .k = _SUNXI_CCU_MULT(4, 2),
-+ .m = _SUNXI_CCU_DIV(0, 2),
-+ .p = _SUNXI_CCU_DIV_MAX(16, 2, 4),
-+ .common = {
-+ .reg = 0x000,
-+ .hw.init = CLK_HW_INIT("pll-cpux",
-+ "osc24M",
-+ &ccu_nkmp_ops,
-+ CLK_SET_RATE_UNGATE),
-+ },
-+};
-+
-+/*
-+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
-+ * the base (2x, 4x and 8x), and one variable divider (the one true
-+ * pll audio).
-+ *
-+ * We don't have any need for the variable divider for now, so we just
-+ * hardcode it to match with the clock names
-+ */
-+#define SUN50I_A64_PLL_AUDIO_REG 0x008
-+
-+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
-+ "osc24M", 0x008,
-+ 8, 7, /* N */
-+ 0, 5, /* M */
-+ BIT(31), /* gate */
-+ BIT(28), /* lock */
-+ CLK_SET_RATE_UNGATE);
-+
-+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
-+ "osc24M", 0x010,
-+ 8, 7, /* N */
-+ 0, 4, /* M */
-+ BIT(24), /* frac enable */
-+ BIT(25), /* frac select */
-+ 270000000, /* frac rate 0 */
-+ 297000000, /* frac rate 1 */
-+ BIT(31), /* gate */
-+ BIT(28), /* lock */
-+ CLK_SET_RATE_UNGATE);
-+
-+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
-+ "osc24M", 0x018,
-+ 8, 7, /* N */
-+ 0, 4, /* M */
-+ BIT(24), /* frac enable */
-+ BIT(25), /* frac select */
-+ 270000000, /* frac rate 0 */
-+ 297000000, /* frac rate 1 */
-+ BIT(31), /* gate */
-+ BIT(28), /* lock */
-+ CLK_SET_RATE_UNGATE);
-+
-+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
-+ "osc24M", 0x020,
-+ 8, 5, /* N */
-+ 4, 2, /* K */
-+ 0, 2, /* M */
-+ BIT(31), /* gate */
-+ BIT(28), /* lock */
-+ CLK_SET_RATE_UNGATE);
-+
-+static struct ccu_nk pll_periph0_clk = {
-+ .enable = BIT(31),
-+ .lock = BIT(28),
-+ .n = _SUNXI_CCU_MULT(8, 5),
-+ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
-+ .fixed_post_div = 2,
-+ .common = {
-+ .reg = 0x028,
-+ .features = CCU_FEATURE_FIXED_POSTDIV,
-+ .hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
-+ &ccu_nk_ops, CLK_SET_RATE_UNGATE),
-+ },
-+};
-+
-+static struct ccu_nk pll_periph1_clk = {
-+ .enable = BIT(31),
-+ .lock = BIT(28),
-+ .n = _SUNXI_CCU_MULT(8, 5),
-+ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
-+ .fixed_post_div = 2,
-+ .common = {
-+ .reg = 0x02c,
-+ .features = CCU_FEATURE_FIXED_POSTDIV,
-+ .hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
-+ &ccu_nk_ops, CLK_SET_RATE_UNGATE),
-+ },
-+};
-+
-+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
-+ "osc24M", 0x030,
-+ 8, 7, /* N */
-+ 0, 4, /* M */
-+ BIT(24), /* frac enable */
-+ BIT(25), /* frac select */
-+ 270000000, /* frac rate 0 */
-+ 297000000, /* frac rate 1 */
-+ BIT(31), /* gate */
-+ BIT(28), /* lock */
-+ CLK_SET_RATE_UNGATE);
-+
-+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
-+ "osc24M", 0x038,
-+ 8, 7, /* N */
-+ 0, 4, /* M */
-+ BIT(24), /* frac enable */
-+ BIT(25), /* frac select */
-+ 270000000, /* frac rate 0 */
-+ 297000000, /* frac rate 1 */
-+ BIT(31), /* gate */
-+ BIT(28), /* lock */
-+ CLK_SET_RATE_UNGATE);
-+
-+/*
-+ * The output function can be changed to something more complex that
-+ * we do not handle yet.
-+ *
-+ * Hardcode the mode so that we don't fall in that case.
-+ */
-+#define SUN50I_A64_PLL_MIPI_REG 0x040
-+
-+struct ccu_nkm pll_mipi_clk = {
-+ .enable = BIT(31),
-+ .lock = BIT(28),
-+ .n = _SUNXI_CCU_MULT(8, 4),
-+ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
-+ .m = _SUNXI_CCU_DIV(0, 4),
-+ .common = {
-+ .reg = 0x040,
-+ .hw.init = CLK_HW_INIT("pll-mipi", "pll-video0",
-+ &ccu_nkm_ops, CLK_SET_RATE_UNGATE),
-+ },
-+};
-+
-+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_hsic_clk, "pll-hsic",
-+ "osc24M", 0x044,
-+ 8, 7, /* N */
-+ 0, 4, /* M */
-+ BIT(24), /* frac enable */
-+ BIT(25), /* frac select */
-+ 270000000, /* frac rate 0 */
-+ 297000000, /* frac rate 1 */
-+ BIT(31), /* gate */
-+ BIT(28), /* lock */
-+ CLK_SET_RATE_UNGATE);
-+
-+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
-+ "osc24M", 0x048,
-+ 8, 7, /* N */
-+ 0, 4, /* M */
-+ BIT(24), /* frac enable */
-+ BIT(25), /* frac select */
-+ 270000000, /* frac rate 0 */
-+ 297000000, /* frac rate 1 */
-+ BIT(31), /* gate */
-+ BIT(28), /* lock */
-+ CLK_SET_RATE_UNGATE);
-+
-+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
-+ "osc24M", 0x04c,
-+ 8, 7, /* N */
-+ 0, 2, /* M */
-+ BIT(31), /* gate */
-+ BIT(28), /* lock */
-+ CLK_SET_RATE_UNGATE);
-+
-+static const char * const cpux_parents[] = { "osc32k", "osc24M",
-+ "pll-cpux" , "pll-cpux" };
-+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
-+ 0x050, 16, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
-+
-+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
-+
-+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
-+ "axi" , "pll-periph0" };
-+static struct ccu_div ahb1_clk = {
-+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
-+
-+ .mux = {
-+ .shift = 12,
-+ .width = 2,
-+
-+ .variable_prediv = {
-+ .index = 3,
-+ .shift = 6,
-+ .width = 2,
-+ },
-+ },
-+
-+ .common = {
-+ .reg = 0x054,
-+ .features = CCU_FEATURE_VARIABLE_PREDIV,
-+ .hw.init = CLK_HW_INIT_PARENTS("ahb1",
-+ ahb1_parents,
-+ &ccu_div_ops,
-+ 0),
-+ },
-+};
-+
-+static struct clk_div_table apb1_div_table[] = {
-+ { .val = 0, .div = 2 },
-+ { .val = 1, .div = 2 },
-+ { .val = 2, .div = 4 },
-+ { .val = 3, .div = 8 },
-+ { /* Sentinel */ },
-+};
-+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
-+ 0x054, 8, 2, apb1_div_table, 0);
-+
-+static const char * const apb2_parents[] = { "osc32k", "osc24M",
-+ "pll-periph0-2x" ,
-+ "pll-periph0-2x" };
-+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
-+ 0, 5, /* M */
-+ 16, 2, /* P */
-+ 24, 2, /* mux */
-+ 0);
-+
-+static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
-+static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
-+ { .index = 1, .div = 2 },
-+};
-+static struct ccu_mux ahb2_clk = {
-+ .mux = {
-+ .shift = 0,
-+ .width = 1,
-+ .fixed_predivs = ahb2_fixed_predivs,
-+ .n_predivs = ARRAY_SIZE(ahb2_fixed_predivs),
-+ },
-+
-+ .common = {
-+ .reg = 0x05c,
-+ .features = CCU_FEATURE_FIXED_PREDIV,
-+ .hw.init = CLK_HW_INIT_PARENTS("ahb2",
-+ ahb2_parents,
-+ &ccu_mux_ops,
-+ 0),
-+ },
-+};
-+
-+static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1",
-+ 0x060, BIT(1), 0);
-+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
-+ 0x060, BIT(5), 0);
-+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
-+ 0x060, BIT(6), 0);
-+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
-+ 0x060, BIT(8), 0);
-+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
-+ 0x060, BIT(9), 0);
-+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
-+ 0x060, BIT(10), 0);
-+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
-+ 0x060, BIT(13), 0);
-+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
-+ 0x060, BIT(14), 0);
-+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb2",
-+ 0x060, BIT(17), 0);
-+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
-+ 0x060, BIT(18), 0);
-+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
-+ 0x060, BIT(19), 0);
-+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
-+ 0x060, BIT(20), 0);
-+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
-+ 0x060, BIT(21), 0);
-+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
-+ 0x060, BIT(23), 0);
-+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
-+ 0x060, BIT(24), 0);
-+static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb2",
-+ 0x060, BIT(25), 0);
-+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
-+ 0x060, BIT(28), 0);
-+static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb2",
-+ 0x060, BIT(29), 0);
-+
-+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
-+ 0x064, BIT(0), 0);
-+static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
-+ 0x064, BIT(3), 0);
-+static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
-+ 0x064, BIT(4), 0);
-+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
-+ 0x064, BIT(5), 0);
-+static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1",
-+ 0x064, BIT(8), 0);
-+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
-+ 0x064, BIT(11), 0);
-+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
-+ 0x064, BIT(12), 0);
-+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
-+ 0x064, BIT(20), 0);
-+static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
-+ 0x064, BIT(21), 0);
-+static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
-+ 0x064, BIT(22), 0);
-+
-+static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
-+ 0x068, BIT(0), 0);
-+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
-+ 0x068, BIT(1), 0);
-+static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
-+ 0x068, BIT(5), 0);
-+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
-+ 0x068, BIT(8), 0);
-+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
-+ 0x068, BIT(12), 0);
-+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
-+ 0x068, BIT(13), 0);
-+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
-+ 0x068, BIT(14), 0);
-+
-+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
-+ 0x06c, BIT(0), 0);
-+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
-+ 0x06c, BIT(1), 0);
-+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
-+ 0x06c, BIT(2), 0);
-+static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
-+ 0x06c, BIT(5), 0);
-+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
-+ 0x06c, BIT(16), 0);
-+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
-+ 0x06c, BIT(17), 0);
-+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
-+ 0x06c, BIT(18), 0);
-+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
-+ 0x06c, BIT(19), 0);
-+static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2",
-+ 0x06c, BIT(20), 0);
-+
-+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
-+ 0x070, BIT(7), 0);
-+
-+static struct clk_div_table ths_div_table[] = {
-+ { .val = 0, .div = 1 },
-+ { .val = 1, .div = 2 },
-+ { .val = 2, .div = 4 },
-+ { .val = 3, .div = 6 },
-+};
-+static const char * const ths_parents[] = { "osc24M" };
-+static struct ccu_div ths_clk = {
-+ .enable = BIT(31),
-+ .div = _SUNXI_CCU_DIV_TABLE(0, 2, ths_div_table),
-+ .mux = _SUNXI_CCU_MUX(24, 2),
-+ .common = {
-+ .reg = 0x074,
-+ .hw.init = CLK_HW_INIT_PARENTS("ths",
-+ ths_parents,
-+ &ccu_div_ops,
-+ 0),
-+ },
-+};
-+
-+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
-+ "pll-periph1" };
-+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
-+ 0, 4, /* M */
-+ 16, 2, /* P */
-+ 24, 2, /* mux */
-+ BIT(31), /* gate */
-+ 0);
-+
-+static const char * const mmc_default_parents[] = { "osc24M", "pll-periph0-2x",
-+ "pll-periph1-2x" };
-+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc_default_parents, 0x088,
-+ 0, 4, /* M */
-+ 16, 2, /* P */
-+ 24, 2, /* mux */
-+ BIT(31), /* gate */
-+ 0);
-+
-+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc_default_parents, 0x08c,
-+ 0, 4, /* M */
-+ 16, 2, /* P */
-+ 24, 2, /* mux */
-+ BIT(31), /* gate */
-+ 0);
-+
-+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc_default_parents, 0x090,
-+ 0, 4, /* M */
-+ 16, 2, /* P */
-+ 24, 2, /* mux */
-+ BIT(31), /* gate */
-+ 0);
-+
-+static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
-+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
-+ 0, 4, /* M */
-+ 16, 2, /* P */
-+ 24, 4, /* mux */
-+ BIT(31), /* gate */
-+ 0);
-+
-+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", mmc_default_parents, 0x09c,
-+ 0, 4, /* M */
-+ 16, 2, /* P */
-+ 24, 2, /* mux */
-+ BIT(31), /* gate */
-+ 0);
-+
-+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
-+ 0, 4, /* M */
-+ 16, 2, /* P */
-+ 24, 2, /* mux */
-+ BIT(31), /* gate */
-+ 0);
-+
-+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
-+ 0, 4, /* M */
-+ 16, 2, /* P */
-+ 24, 2, /* mux */
-+ BIT(31), /* gate */
-+ 0);
-+
-+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
-+ "pll-audio-2x", "pll-audio" };
-+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
-+ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
-+
-+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
-+ 0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
-+
-+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
-+ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
-+
-+static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
-+ 0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
-+
-+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
-+ 0x0cc, BIT(8), 0);
-+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
-+ 0x0cc, BIT(9), 0);
-+static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic",
-+ 0x0cc, BIT(10), 0);
-+static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M",
-+ 0x0cc, BIT(11), 0);
-+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M",
-+ 0x0cc, BIT(16), 0);
-+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "usb-ohci0",
-+ 0x0cc, BIT(17), 0);
-+
-+static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
-+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
-+ 0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
-+
-+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
-+ 0x100, BIT(0), 0);
-+static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram",
-+ 0x100, BIT(1), 0);
-+static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
-+ 0x100, BIT(2), 0);
-+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
-+ 0x100, BIT(3), 0);
-+
-+static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
-+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
-+ 0x104, 0, 4, 24, 3, BIT(31), 0);
-+
-+static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" };
-+static const u8 tcon0_table[] = { 0, 2, };
-+static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
-+ tcon0_table, 0x118, 24, 3, BIT(31),
-+ CLK_SET_RATE_PARENT);
-+
-+static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
-+static const u8 tcon1_table[] = { 0, 2, };
-+struct ccu_div tcon1_clk = {
-+ .enable = BIT(31),
-+ .div = _SUNXI_CCU_DIV(0, 4),
-+ .mux = _SUNXI_CCU_MUX_TABLE(24, 2, tcon1_table),
-+ .common = {
-+ .reg = 0x11c,
-+ .hw.init = CLK_HW_INIT_PARENTS("tcon1",
-+ tcon1_parents,
-+ &ccu_div_ops,
-+ CLK_SET_RATE_PARENT),
-+ },
-+};
-+
-+static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
-+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
-+ 0x124, 0, 4, 24, 3, BIT(31), 0);
-+
-+static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M",
-+ 0x130, BIT(31), 0);
-+
-+static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
-+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
-+ 0x134, 16, 4, 24, 3, BIT(31), 0);
-+
-+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video1", "pll-periph1" };
-+static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk", csi_mclk_parents,
-+ 0x134, 0, 5, 8, 3, BIT(15), 0);
-+
-+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
-+ 0x13c, 16, 3, BIT(31), 0);
-+
-+static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio",
-+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
-+
-+static SUNXI_CCU_GATE(ac_dig_4x_clk, "ac-dig-4x", "pll-audio-4x",
-+ 0x140, BIT(30), CLK_SET_RATE_PARENT);
-+
-+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
-+ 0x144, BIT(31), 0);
-+
-+static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
-+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
-+ 0x150, 0, 4, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
-+
-+static SUNXI_CCU_GATE(hdmi_ddc_clk, "hdmi-ddc", "osc24M",
-+ 0x154, BIT(31), 0);
-+
-+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
-+ "pll-ddr0", "pll-ddr1" };
-+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
-+ 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
-+
-+static const char * const dsi_dphy_parents[] = { "pll-video0", "pll-periph0" };
-+static const u8 dsi_dphy_table[] = { 0, 2, };
-+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_dphy_clk, "dsi-dphy",
-+ dsi_dphy_parents, dsi_dphy_table,
-+ 0x168, 0, 4, 8, 2, BIT(31), CLK_SET_RATE_PARENT);
-+
-+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
-+ 0x1a0, 0, 3, BIT(31), CLK_SET_RATE_PARENT);
-+
-+/* Fixed Factor clocks */
-+static CLK_FIXED_FACTOR(osc12M_clk, "osc12M", "osc24M", 1, 2, 0);
-+
-+/* We hardcode the divider to 4 for now */
-+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
-+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
-+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
-+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
-+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
-+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
-+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
-+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
-+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
-+ "pll-periph0", 1, 2, 0);
-+static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
-+ "pll-periph1", 1, 2, 0);
-+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
-+ "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
-+
-+static struct ccu_common *sun50i_a64_ccu_clks[] = {
-+ &pll_cpux_clk.common,
-+ &pll_audio_base_clk.common,
-+ &pll_video0_clk.common,
-+ &pll_ve_clk.common,
-+ &pll_ddr0_clk.common,
-+ &pll_periph0_clk.common,
-+ &pll_periph1_clk.common,
-+ &pll_video1_clk.common,
-+ &pll_gpu_clk.common,
-+ &pll_mipi_clk.common,
-+ &pll_hsic_clk.common,
-+ &pll_de_clk.common,
-+ &pll_ddr1_clk.common,
-+ &cpux_clk.common,
-+ &axi_clk.common,
-+ &ahb1_clk.common,
-+ &apb1_clk.common,
-+ &apb2_clk.common,
-+ &ahb2_clk.common,
-+ &bus_mipi_dsi_clk.common,
-+ &bus_ce_clk.common,
-+ &bus_dma_clk.common,
-+ &bus_mmc0_clk.common,
-+ &bus_mmc1_clk.common,
-+ &bus_mmc2_clk.common,
-+ &bus_nand_clk.common,
-+ &bus_dram_clk.common,
-+ &bus_emac_clk.common,
-+ &bus_ts_clk.common,
-+ &bus_hstimer_clk.common,
-+ &bus_spi0_clk.common,
-+ &bus_spi1_clk.common,
-+ &bus_otg_clk.common,
-+ &bus_ehci0_clk.common,
-+ &bus_ehci1_clk.common,
-+ &bus_ohci0_clk.common,
-+ &bus_ohci1_clk.common,
-+ &bus_ve_clk.common,
-+ &bus_tcon0_clk.common,
-+ &bus_tcon1_clk.common,
-+ &bus_deinterlace_clk.common,
-+ &bus_csi_clk.common,
-+ &bus_hdmi_clk.common,
-+ &bus_de_clk.common,
-+ &bus_gpu_clk.common,
-+ &bus_msgbox_clk.common,
-+ &bus_spinlock_clk.common,
-+ &bus_codec_clk.common,
-+ &bus_spdif_clk.common,
-+ &bus_pio_clk.common,
-+ &bus_ths_clk.common,
-+ &bus_i2s0_clk.common,
-+ &bus_i2s1_clk.common,
-+ &bus_i2s2_clk.common,
-+ &bus_i2c0_clk.common,
-+ &bus_i2c1_clk.common,
-+ &bus_i2c2_clk.common,
-+ &bus_scr_clk.common,
-+ &bus_uart0_clk.common,
-+ &bus_uart1_clk.common,
-+ &bus_uart2_clk.common,
-+ &bus_uart3_clk.common,
-+ &bus_uart4_clk.common,
-+ &bus_dbg_clk.common,
-+ &ths_clk.common,
-+ &nand_clk.common,
-+ &mmc0_clk.common,
-+ &mmc1_clk.common,
-+ &mmc2_clk.common,
-+ &ts_clk.common,
-+ &ce_clk.common,
-+ &spi0_clk.common,
-+ &spi1_clk.common,
-+ &i2s0_clk.common,
-+ &i2s1_clk.common,
-+ &i2s2_clk.common,
-+ &spdif_clk.common,
-+ &usb_phy0_clk.common,
-+ &usb_phy1_clk.common,
-+ &usb_hsic_clk.common,
-+ &usb_hsic_12m_clk.common,
-+ &usb_ohci0_clk.common,
-+ &usb_ohci1_clk.common,
-+ &dram_clk.common,
-+ &dram_ve_clk.common,
-+ &dram_csi_clk.common,
-+ &dram_deinterlace_clk.common,
-+ &dram_ts_clk.common,
-+ &de_clk.common,
-+ &tcon0_clk.common,
-+ &tcon1_clk.common,
-+ &deinterlace_clk.common,
-+ &csi_misc_clk.common,
-+ &csi_sclk_clk.common,
-+ &csi_mclk_clk.common,
-+ &ve_clk.common,
-+ &ac_dig_clk.common,
-+ &ac_dig_4x_clk.common,
-+ &avs_clk.common,
-+ &hdmi_clk.common,
-+ &hdmi_ddc_clk.common,
-+ &mbus_clk.common,
-+ &dsi_dphy_clk.common,
-+ &gpu_clk.common,
-+};
-+
-+static struct clk_hw_onecell_data sun50i_a64_hw_clks = {
-+ .hws = {
-+ [CLK_OSC_12M] = &osc12M_clk.hw,
-+ [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
-+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
-+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
-+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
-+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
-+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
-+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
-+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
-+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
-+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
-+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
-+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
-+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
-+ [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
-+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
-+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
-+ [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
-+ [CLK_PLL_HSIC] = &pll_hsic_clk.common.hw,
-+ [CLK_PLL_DE] = &pll_de_clk.common.hw,
-+ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
-+ [CLK_CPUX] = &cpux_clk.common.hw,
-+ [CLK_AXI] = &axi_clk.common.hw,
-+ [CLK_AHB1] = &ahb1_clk.common.hw,
-+ [CLK_APB1] = &apb1_clk.common.hw,
-+ [CLK_APB2] = &apb2_clk.common.hw,
-+ [CLK_AHB2] = &ahb2_clk.common.hw,
-+ [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
-+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
-+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
-+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
-+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
-+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
-+ [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
-+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
-+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
-+ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
-+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
-+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
-+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
-+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
-+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
-+ [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
-+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
-+ [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
-+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
-+ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
-+ [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
-+ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
-+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
-+ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
-+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
-+ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
-+ [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
-+ [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
-+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
-+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
-+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
-+ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
-+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
-+ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
-+ [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
-+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
-+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
-+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
-+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
-+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
-+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
-+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
-+ [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
-+ [CLK_BUS_SCR] = &bus_scr_clk.common.hw,
-+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
-+ [CLK_THS] = &ths_clk.common.hw,
-+ [CLK_NAND] = &nand_clk.common.hw,
-+ [CLK_MMC0] = &mmc0_clk.common.hw,
-+ [CLK_MMC1] = &mmc1_clk.common.hw,
-+ [CLK_MMC2] = &mmc2_clk.common.hw,
-+ [CLK_TS] = &ts_clk.common.hw,
-+ [CLK_CE] = &ce_clk.common.hw,
-+ [CLK_SPI0] = &spi0_clk.common.hw,
-+ [CLK_SPI1] = &spi1_clk.common.hw,
-+ [CLK_I2S0] = &i2s0_clk.common.hw,
-+ [CLK_I2S1] = &i2s1_clk.common.hw,
-+ [CLK_I2S2] = &i2s2_clk.common.hw,
-+ [CLK_SPDIF] = &spdif_clk.common.hw,
-+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
-+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
-+ [CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
-+ [CLK_USB_HSIC_12M] = &usb_hsic_12m_clk.common.hw,
-+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
-+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
-+ [CLK_DRAM] = &dram_clk.common.hw,
-+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
-+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
-+ [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
-+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
-+ [CLK_DE] = &de_clk.common.hw,
-+ [CLK_TCON0] = &tcon0_clk.common.hw,
-+ [CLK_TCON1] = &tcon1_clk.common.hw,
-+ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
-+ [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
-+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
-+ [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
-+ [CLK_VE] = &ve_clk.common.hw,
-+ [CLK_AC_DIG] = &ac_dig_clk.common.hw,
-+ [CLK_AC_DIG_4X] = &ac_dig_4x_clk.common.hw,
-+ [CLK_AVS] = &avs_clk.common.hw,
-+ [CLK_HDMI] = &hdmi_clk.common.hw,
-+ [CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw,
-+ [CLK_MBUS] = &mbus_clk.common.hw,
-+ [CLK_DSI_DPHY] = &dsi_dphy_clk.common.hw,
-+ [CLK_GPU] = &gpu_clk.common.hw,
-+ },
-+ .num = CLK_NUMBER,
-+};
-+
-+static struct ccu_reset_map sun50i_a64_ccu_resets[] = {
-+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
-+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
-+ [RST_USB_HSIC] = { 0x0cc, BIT(2) },
-+
-+ [RST_DRAM] = { 0x0f4, BIT(31) },
-+ [RST_MBUS] = { 0x0fc, BIT(31) },
-+
-+ [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
-+ [RST_BUS_CE] = { 0x2c0, BIT(5) },
-+ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
-+ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
-+ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
-+ [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
-+ [RST_BUS_NAND] = { 0x2c0, BIT(13) },
-+ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
-+ [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
-+ [RST_BUS_TS] = { 0x2c0, BIT(18) },
-+ [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
-+ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
-+ [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
-+ [RST_BUS_OTG] = { 0x2c0, BIT(23) },
-+ [RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
-+ [RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
-+ [RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
-+ [RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
-+
-+ [RST_BUS_VE] = { 0x2c4, BIT(0) },
-+ [RST_BUS_TCON0] = { 0x2c4, BIT(3) },
-+ [RST_BUS_TCON1] = { 0x2c4, BIT(4) },
-+ [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
-+ [RST_BUS_CSI] = { 0x2c4, BIT(8) },
-+ [RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
-+ [RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
-+ [RST_BUS_DE] = { 0x2c4, BIT(12) },
-+ [RST_BUS_GPU] = { 0x2c4, BIT(20) },
-+ [RST_BUS_MSGBOX] = { 0x2c4, BIT(21) },
-+ [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
-+ [RST_BUS_DBG] = { 0x2c4, BIT(31) },
-+
-+ [RST_BUS_LVDS] = { 0x2c8, BIT(0) },
-+
-+ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
-+ [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
-+ [RST_BUS_THS] = { 0x2d0, BIT(8) },
-+ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
-+ [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
-+ [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
-+
-+ [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
-+ [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
-+ [RST_BUS_I2C2] = { 0x2d8, BIT(2) },
-+ [RST_BUS_SCR] = { 0x2d8, BIT(5) },
-+ [RST_BUS_UART0] = { 0x2d8, BIT(16) },
-+ [RST_BUS_UART1] = { 0x2d8, BIT(17) },
-+ [RST_BUS_UART2] = { 0x2d8, BIT(18) },
-+ [RST_BUS_UART3] = { 0x2d8, BIT(19) },
-+ [RST_BUS_UART4] = { 0x2d8, BIT(20) },
-+};
-+
-+static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = {
-+ .ccu_clks = sun50i_a64_ccu_clks,
-+ .num_ccu_clks = ARRAY_SIZE(sun50i_a64_ccu_clks),
-+
-+ .hw_clks = &sun50i_a64_hw_clks,
-+
-+ .resets = sun50i_a64_ccu_resets,
-+ .num_resets = ARRAY_SIZE(sun50i_a64_ccu_resets),
-+};
-+
-+static int sun50i_a64_ccu_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ void __iomem *reg;
-+ u32 val;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ reg = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(reg))
-+ return PTR_ERR(reg);
-+
-+ /* Force the PLL-Audio-1x divider to 4 */
-+ val = readl(reg + SUN50I_A64_PLL_AUDIO_REG);
-+ val &= ~GENMASK(19, 16);
-+ writel(val | (3 << 16), reg + SUN50I_A64_PLL_AUDIO_REG);
-+
-+ writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
-+
-+ return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
-+}
-+
-+static const struct of_device_id sun50i_a64_ccu_ids[] = {
-+ { .compatible = "allwinner,sun50i-a64-ccu" },
-+ { }
-+};
-+
-+static struct platform_driver sun50i_a64_ccu_driver = {
-+ .probe = sun50i_a64_ccu_probe,
-+ .driver = {
-+ .name = "sun50i-a64-ccu",
-+ .of_match_table = sun50i_a64_ccu_ids,
-+ },
-+};
-+builtin_platform_driver(sun50i_a64_ccu_driver);
---- /dev/null
-+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
-@@ -0,0 +1,72 @@
-+/*
-+ * Copyright 2016 Maxime Ripard
-+ *
-+ * Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _CCU_SUN50I_A64_H_
-+#define _CCU_SUN50I_A64_H_
-+
-+#include <dt-bindings/clock/sun50i-a64-ccu.h>
-+#include <dt-bindings/reset/sun50i-a64-ccu.h>
-+
-+#define CLK_OSC_12M 0
-+#define CLK_PLL_CPUX 1
-+#define CLK_PLL_AUDIO_BASE 2
-+#define CLK_PLL_AUDIO 3
-+#define CLK_PLL_AUDIO_2X 4
-+#define CLK_PLL_AUDIO_4X 5
-+#define CLK_PLL_AUDIO_8X 6
-+#define CLK_PLL_VIDEO0 7
-+#define CLK_PLL_VIDEO0_2X 8
-+#define CLK_PLL_VE 9
-+#define CLK_PLL_DDR0 10
-+#define CLK_PLL_PERIPH0 11
-+#define CLK_PLL_PERIPH0_2X 12
-+#define CLK_PLL_PERIPH1 13
-+#define CLK_PLL_PERIPH1_2X 14
-+#define CLK_PLL_VIDEO1 15
-+#define CLK_PLL_GPU 16
-+#define CLK_PLL_MIPI 17
-+#define CLK_PLL_HSIC 18
-+#define CLK_PLL_DE 19
-+#define CLK_PLL_DDR1 20
-+#define CLK_CPUX 21
-+#define CLK_AXI 22
-+#define CLK_APB 23
-+#define CLK_AHB1 24
-+#define CLK_APB1 25
-+#define CLK_APB2 26
-+#define CLK_AHB2 27
-+
-+/* All the bus gates are exported */
-+
-+/* The first bunch of module clocks are exported */
-+
-+#define CLK_USB_OHCI0_12M 90
-+
-+#define CLK_USB_OHCI1_12M 92
-+
-+#define CLK_DRAM 94
-+
-+/* All the DRAM gates are exported */
-+
-+/* Some more module clocks are exported */
-+
-+#define CLK_MBUS 112
-+
-+/* And the DSI and GPU module clock is exported */
-+
-+#define CLK_NUMBER (CLK_GPU + 1)
-+
-+#endif /* _CCU_SUN50I_A64_H_ */
---- /dev/null
-+++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
-@@ -0,0 +1,134 @@
-+/*
-+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_
-+#define _DT_BINDINGS_CLK_SUN50I_A64_H_
-+
-+#define CLK_BUS_MIPI_DSI 28
-+#define CLK_BUS_CE 29
-+#define CLK_BUS_DMA 30
-+#define CLK_BUS_MMC0 31
-+#define CLK_BUS_MMC1 32
-+#define CLK_BUS_MMC2 33
-+#define CLK_BUS_NAND 34
-+#define CLK_BUS_DRAM 35
-+#define CLK_BUS_EMAC 36
-+#define CLK_BUS_TS 37
-+#define CLK_BUS_HSTIMER 38
-+#define CLK_BUS_SPI0 39
-+#define CLK_BUS_SPI1 40
-+#define CLK_BUS_OTG 41
-+#define CLK_BUS_EHCI0 42
-+#define CLK_BUS_EHCI1 43
-+#define CLK_BUS_OHCI0 44
-+#define CLK_BUS_OHCI1 45
-+#define CLK_BUS_VE 46
-+#define CLK_BUS_TCON0 47
-+#define CLK_BUS_TCON1 48
-+#define CLK_BUS_DEINTERLACE 49
-+#define CLK_BUS_CSI 50
-+#define CLK_BUS_HDMI 51
-+#define CLK_BUS_DE 52
-+#define CLK_BUS_GPU 53
-+#define CLK_BUS_MSGBOX 54
-+#define CLK_BUS_SPINLOCK 55
-+#define CLK_BUS_CODEC 56
-+#define CLK_BUS_SPDIF 57
-+#define CLK_BUS_PIO 58
-+#define CLK_BUS_THS 59
-+#define CLK_BUS_I2S0 60
-+#define CLK_BUS_I2S1 61
-+#define CLK_BUS_I2S2 62
-+#define CLK_BUS_I2C0 63
-+#define CLK_BUS_I2C1 64
-+#define CLK_BUS_I2C2 65
-+#define CLK_BUS_SCR 66
-+#define CLK_BUS_UART0 67
-+#define CLK_BUS_UART1 68
-+#define CLK_BUS_UART2 69
-+#define CLK_BUS_UART3 70
-+#define CLK_BUS_UART4 71
-+#define CLK_BUS_DBG 72
-+#define CLK_THS 73
-+#define CLK_NAND 74
-+#define CLK_MMC0 75
-+#define CLK_MMC1 76
-+#define CLK_MMC2 77
-+#define CLK_TS 78
-+#define CLK_CE 79
-+#define CLK_SPI0 80
-+#define CLK_SPI1 81
-+#define CLK_I2S0 82
-+#define CLK_I2S1 83
-+#define CLK_I2S2 84
-+#define CLK_SPDIF 85
-+#define CLK_USB_PHY0 86
-+#define CLK_USB_PHY1 87
-+#define CLK_USB_HSIC 88
-+#define CLK_USB_HSIC_12M 89
-+
-+#define CLK_USB_OHCI0 91
-+
-+#define CLK_USB_OHCI1 93
-+
-+#define CLK_DRAM_VE 95
-+#define CLK_DRAM_CSI 96
-+#define CLK_DRAM_DEINTERLACE 97
-+#define CLK_DRAM_TS 98
-+#define CLK_DE 99
-+#define CLK_TCON0 100
-+#define CLK_TCON1 101
-+#define CLK_DEINTERLACE 102
-+#define CLK_CSI_MISC 103
-+#define CLK_CSI_SCLK 104
-+#define CLK_CSI_MCLK 105
-+#define CLK_VE 106
-+#define CLK_AC_DIG 107
-+#define CLK_AC_DIG_4X 108
-+#define CLK_AVS 109
-+#define CLK_HDMI 110
-+#define CLK_HDMI_DDC 111
-+
-+#define CLK_DSI_DPHY 113
-+#define CLK_GPU 114
-+
-+#endif /* _DT_BINDINGS_CLK_SUN50I_H_ */
---- /dev/null
-+++ b/include/dt-bindings/reset/sun50i-a64-ccu.h
-@@ -0,0 +1,98 @@
-+/*
-+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#ifndef _DT_BINDINGS_RST_SUN50I_A64_H_
-+#define _DT_BINDINGS_RST_SUN50I_A64_H_
-+
-+#define RST_USB_PHY0 0
-+#define RST_USB_PHY1 1
-+#define RST_USB_HSIC 2
-+#define RST_DRAM 3
-+#define RST_MBUS 4
-+#define RST_BUS_MIPI_DSI 5
-+#define RST_BUS_CE 6
-+#define RST_BUS_DMA 7
-+#define RST_BUS_MMC0 8
-+#define RST_BUS_MMC1 9
-+#define RST_BUS_MMC2 10
-+#define RST_BUS_NAND 11
-+#define RST_BUS_DRAM 12
-+#define RST_BUS_EMAC 13
-+#define RST_BUS_TS 14
-+#define RST_BUS_HSTIMER 15
-+#define RST_BUS_SPI0 16
-+#define RST_BUS_SPI1 17
-+#define RST_BUS_OTG 18
-+#define RST_BUS_EHCI0 19
-+#define RST_BUS_EHCI1 20
-+#define RST_BUS_OHCI0 21
-+#define RST_BUS_OHCI1 22
-+#define RST_BUS_VE 23
-+#define RST_BUS_TCON0 24
-+#define RST_BUS_TCON1 25
-+#define RST_BUS_DEINTERLACE 26
-+#define RST_BUS_CSI 27
-+#define RST_BUS_HDMI0 28
-+#define RST_BUS_HDMI1 29
-+#define RST_BUS_DE 30
-+#define RST_BUS_GPU 31
-+#define RST_BUS_MSGBOX 32
-+#define RST_BUS_SPINLOCK 33
-+#define RST_BUS_DBG 34
-+#define RST_BUS_LVDS 35
-+#define RST_BUS_CODEC 36
-+#define RST_BUS_SPDIF 37
-+#define RST_BUS_THS 38
-+#define RST_BUS_I2S0 39
-+#define RST_BUS_I2S1 40
-+#define RST_BUS_I2S2 41
-+#define RST_BUS_I2C0 42
-+#define RST_BUS_I2C1 43
-+#define RST_BUS_I2C2 44
-+#define RST_BUS_SCR 45
-+#define RST_BUS_UART0 46
-+#define RST_BUS_UART1 47
-+#define RST_BUS_UART2 48
-+#define RST_BUS_UART3 49
-+#define RST_BUS_UART4 50
-+
-+#endif /* _DT_BINDINGS_RST_SUN50I_A64_H_ */
diff --git a/target/linux/sunxi/patches-4.9/0010-arm64-dts-add-Allwinner-A64-SoC-.dtsi.patch b/target/linux/sunxi/patches-4.9/0010-arm64-dts-add-Allwinner-A64-SoC-.dtsi.patch
deleted file mode 100644
index eaaba96fc1..0000000000
--- a/target/linux/sunxi/patches-4.9/0010-arm64-dts-add-Allwinner-A64-SoC-.dtsi.patch
+++ /dev/null
@@ -1,311 +0,0 @@
-From 6bc37fac30cf01c39feb17834090089304bd1d31 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Mon, 18 Jan 2016 10:24:31 +0000
-Subject: arm64: dts: add Allwinner A64 SoC .dtsi
-
-The Allwinner A64 SoC is a low-cost chip with 4 ARM Cortex-A53 cores
-and the typical tablet / TV box peripherals.
-The SoC is based on the (32-bit) Allwinner H3 chip, sharing most of
-the peripherals and the memory map.
-Although the cores are proper 64-bit ones, the whole SoC is actually
-limited to 4GB (including all the supported DRAM), so we use 32-bit
-address and size cells. This has the nice feature of us being able to
-reuse the DT for 32-bit kernels as well.
-This .dtsi lists the hardware that we support so far.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-[Maxime: Convert to CCU binding, drop the MMC support for now]
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
- MAINTAINERS | 1 +
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 263 ++++++++++++++++++++++++
- 3 files changed, 265 insertions(+)
- create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-
---- a/Documentation/devicetree/bindings/arm/sunxi.txt
-+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
-@@ -14,4 +14,5 @@ using one of the following compatible st
- allwinner,sun8i-a83t
- allwinner,sun8i-h3
- allwinner,sun9i-a80
-+ allwinner,sun50i-a64
- nextthing,gr8
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -1026,6 +1026,7 @@ L: linux-arm-kernel@lists.infradead.org
- S: Maintained
- N: sun[x456789]i
- F: arch/arm/boot/dts/ntc-gr8*
-+F: arch/arm64/boot/dts/allwinner/
-
- ARM/Allwinner SoC Clock Support
- M: Emilio López <emilio@elopez.com.ar>
---- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -0,0 +1,263 @@
-+/*
-+ * Copyright (C) 2016 ARM Ltd.
-+ * based on the Allwinner H3 dtsi:
-+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include <dt-bindings/clock/sun50i-a64-ccu.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include <dt-bindings/reset/sun50i-a64-ccu.h>
-+
-+/ {
-+ interrupt-parent = <&gic>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu0: cpu@0 {
-+ compatible = "arm,cortex-a53", "arm,armv8";
-+ device_type = "cpu";
-+ reg = <0>;
-+ enable-method = "psci";
-+ };
-+
-+ cpu1: cpu@1 {
-+ compatible = "arm,cortex-a53", "arm,armv8";
-+ device_type = "cpu";
-+ reg = <1>;
-+ enable-method = "psci";
-+ };
-+
-+ cpu2: cpu@2 {
-+ compatible = "arm,cortex-a53", "arm,armv8";
-+ device_type = "cpu";
-+ reg = <2>;
-+ enable-method = "psci";
-+ };
-+
-+ cpu3: cpu@3 {
-+ compatible = "arm,cortex-a53", "arm,armv8";
-+ device_type = "cpu";
-+ reg = <3>;
-+ enable-method = "psci";
-+ };
-+ };
-+
-+ osc24M: osc24M_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <24000000>;
-+ clock-output-names = "osc24M";
-+ };
-+
-+ osc32k: osc32k_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <32768>;
-+ clock-output-names = "osc32k";
-+ };
-+
-+ psci {
-+ compatible = "arm,psci-0.2";
-+ method = "smc";
-+ };
-+
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <GIC_PPI 13
-+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-+ <GIC_PPI 14
-+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-+ <GIC_PPI 11
-+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-+ <GIC_PPI 10
-+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-+ };
-+
-+ soc {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ ccu: clock@01c20000 {
-+ compatible = "allwinner,sun50i-a64-ccu";
-+ reg = <0x01c20000 0x400>;
-+ clocks = <&osc24M>, <&osc32k>;
-+ clock-names = "hosc", "losc";
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
-+ pio: pinctrl@1c20800 {
-+ compatible = "allwinner,sun50i-a64-pinctrl";
-+ reg = <0x01c20800 0x400>;
-+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_PIO>;
-+ gpio-controller;
-+ #gpio-cells = <3>;
-+ interrupt-controller;
-+ #interrupt-cells = <3>;
-+
-+ i2c1_pins: i2c1_pins {
-+ pins = "PH2", "PH3";
-+ function = "i2c1";
-+ };
-+
-+ uart0_pins_a: uart0@0 {
-+ pins = "PB8", "PB9";
-+ function = "uart0";
-+ };
-+ };
-+
-+ uart0: serial@1c28000 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x01c28000 0x400>;
-+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ clocks = <&ccu CLK_BUS_UART0>;
-+ resets = <&ccu RST_BUS_UART0>;
-+ status = "disabled";
-+ };
-+
-+ uart1: serial@1c28400 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x01c28400 0x400>;
-+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ clocks = <&ccu CLK_BUS_UART1>;
-+ resets = <&ccu RST_BUS_UART1>;
-+ status = "disabled";
-+ };
-+
-+ uart2: serial@1c28800 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x01c28800 0x400>;
-+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ clocks = <&ccu CLK_BUS_UART2>;
-+ resets = <&ccu RST_BUS_UART2>;
-+ status = "disabled";
-+ };
-+
-+ uart3: serial@1c28c00 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x01c28c00 0x400>;
-+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ clocks = <&ccu CLK_BUS_UART3>;
-+ resets = <&ccu RST_BUS_UART3>;
-+ status = "disabled";
-+ };
-+
-+ uart4: serial@1c29000 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x01c29000 0x400>;
-+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ clocks = <&ccu CLK_BUS_UART4>;
-+ resets = <&ccu RST_BUS_UART4>;
-+ status = "disabled";
-+ };
-+
-+ i2c0: i2c@1c2ac00 {
-+ compatible = "allwinner,sun6i-a31-i2c";
-+ reg = <0x01c2ac00 0x400>;
-+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_I2C0>;
-+ resets = <&ccu RST_BUS_I2C0>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ i2c1: i2c@1c2b000 {
-+ compatible = "allwinner,sun6i-a31-i2c";
-+ reg = <0x01c2b000 0x400>;
-+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_I2C1>;
-+ resets = <&ccu RST_BUS_I2C1>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ i2c2: i2c@1c2b400 {
-+ compatible = "allwinner,sun6i-a31-i2c";
-+ reg = <0x01c2b400 0x400>;
-+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_I2C2>;
-+ resets = <&ccu RST_BUS_I2C2>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ gic: interrupt-controller@1c81000 {
-+ compatible = "arm,gic-400";
-+ reg = <0x01c81000 0x1000>,
-+ <0x01c82000 0x2000>,
-+ <0x01c84000 0x2000>,
-+ <0x01c86000 0x2000>;
-+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-+ interrupt-controller;
-+ #interrupt-cells = <3>;
-+ };
-+
-+ rtc: rtc@1f00000 {
-+ compatible = "allwinner,sun6i-a31-rtc";
-+ reg = <0x01f00000 0x54>;
-+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+ };
-+};
diff --git a/target/linux/sunxi/patches-4.9/0011-arm64-dts-add-Pine64-support.patch b/target/linux/sunxi/patches-4.9/0011-arm64-dts-add-Pine64-support.patch
deleted file mode 100644
index 9960588ab8..0000000000
--- a/target/linux/sunxi/patches-4.9/0011-arm64-dts-add-Pine64-support.patch
+++ /dev/null
@@ -1,176 +0,0 @@
-From 4e3886081848b7ea16452a92c4324acaab644d49 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Tue, 19 Jan 2016 10:36:39 +0000
-Subject: arm64: dts: add Pine64 support
-
-The Pine64 is a cost-efficient development board based on the
-Allwinner A64 SoC.
-There are three models: the basic version with Fast Ethernet and
-512 MB of DRAM (Pine64) and two Pine64+ versions, which both
-feature Gigabit Ethernet and additional connectors for touchscreens
-and a camera. Or as my son put it: "Those are smaller and these are
-missing." ;-)
-The two Pine64+ models just differ in the amount of DRAM
-(1GB vs. 2GB). Since U-Boot will figure out the right size for us and
-patches the DT accordingly we just need to provide one DT for the
-Pine64+.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-[Maxime: Removed the common DTSI and include directly the pine64 DTS]
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/Makefile | 1 +
- arch/arm64/boot/dts/allwinner/Makefile | 5 ++
- .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 50 +++++++++++++++
- .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 74 ++++++++++++++++++++++
- 4 files changed, 130 insertions(+)
- create mode 100644 arch/arm64/boot/dts/allwinner/Makefile
- create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
- create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-
---- a/arch/arm64/boot/dts/Makefile
-+++ b/arch/arm64/boot/dts/Makefile
-@@ -1,4 +1,5 @@
- dts-dirs += al
-+dts-dirs += allwinner
- dts-dirs += altera
- dts-dirs += amd
- dts-dirs += amlogic
---- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/Makefile
-@@ -0,0 +1,5 @@
-+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
-+
-+always := $(dtb-y)
-+subdir-y := $(dts-dirs)
-+clean-files := *.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
-@@ -0,0 +1,50 @@
-+/*
-+ * Copyright (c) 2016 ARM Ltd.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This library is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This library is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "sun50i-a64-pine64.dts"
-+
-+/ {
-+ model = "Pine64+";
-+ compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
-+
-+ /* TODO: Camera, Ethernet PHY, touchscreen, etc. */
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -0,0 +1,74 @@
-+/*
-+ * Copyright (c) 2016 ARM Ltd.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This library is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This library is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "sun50i-a64.dtsi"
-+
-+/ {
-+ model = "Pine64";
-+ compatible = "pine64,pine64", "allwinner,sun50i-a64";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins>;
-+ status = "okay";
-+};
-+
-+&i2c1_pins {
-+ bias-pull-up;
-+};
diff --git a/target/linux/sunxi/patches-4.9/0012-arm64-dts-fix-build-errors-from-missing-dependencies.patch b/target/linux/sunxi/patches-4.9/0012-arm64-dts-fix-build-errors-from-missing-dependencies.patch
deleted file mode 100644
index 1719b682b3..0000000000
--- a/target/linux/sunxi/patches-4.9/0012-arm64-dts-fix-build-errors-from-missing-dependencies.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From f98121f3ef3d36f4d040b11ab38f15387f6eefa2 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Wed, 30 Nov 2016 15:08:55 +0100
-Subject: arm64: dts: fix build errors from missing dependencies
-
-Two branches were incorrectly sent without having the necessary
-header file changes. Rather than back those out now, I'm replacing
-the symbolic names for the clks and resets with the numeric
-values to get 'make allmodconfig dtbs' back to work.
-
-After the header file changes are merged, we can revert this
-patch.
-
-Fixes: 6bc37fa ("arm64: dts: add Allwinner A64 SoC .dtsi")
-Fixes: 50784e6 ("dts: arm64: db820c: add pmic pins specific dts file")
-Acked-by: Andre Przywara <andre.przywara@arm.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 36 ++++++++++------------
- .../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 2 +-
- 2 files changed, 18 insertions(+), 20 deletions(-)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -42,10 +42,8 @@
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
--#include <dt-bindings/clock/sun50i-a64-ccu.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
--#include <dt-bindings/reset/sun50i-a64-ccu.h>
-
- / {
- interrupt-parent = <&gic>;
-@@ -137,7 +135,7 @@
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&ccu CLK_BUS_PIO>;
-+ clocks = <&ccu 58>;
- gpio-controller;
- #gpio-cells = <3>;
- interrupt-controller;
-@@ -160,8 +158,8 @@
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
-- clocks = <&ccu CLK_BUS_UART0>;
-- resets = <&ccu RST_BUS_UART0>;
-+ clocks = <&ccu 67>;
-+ resets = <&ccu 46>;
- status = "disabled";
- };
-
-@@ -171,8 +169,8 @@
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
-- clocks = <&ccu CLK_BUS_UART1>;
-- resets = <&ccu RST_BUS_UART1>;
-+ clocks = <&ccu 68>;
-+ resets = <&ccu 47>;
- status = "disabled";
- };
-
-@@ -182,8 +180,8 @@
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
-- clocks = <&ccu CLK_BUS_UART2>;
-- resets = <&ccu RST_BUS_UART2>;
-+ clocks = <&ccu 69>;
-+ resets = <&ccu 48>;
- status = "disabled";
- };
-
-@@ -193,8 +191,8 @@
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
-- clocks = <&ccu CLK_BUS_UART3>;
-- resets = <&ccu RST_BUS_UART3>;
-+ clocks = <&ccu 70>;
-+ resets = <&ccu 49>;
- status = "disabled";
- };
-
-@@ -204,8 +202,8 @@
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
-- clocks = <&ccu CLK_BUS_UART4>;
-- resets = <&ccu RST_BUS_UART4>;
-+ clocks = <&ccu 71>;
-+ resets = <&ccu 50>;
- status = "disabled";
- };
-
-@@ -213,8 +211,8 @@
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&ccu CLK_BUS_I2C0>;
-- resets = <&ccu RST_BUS_I2C0>;
-+ clocks = <&ccu 63>;
-+ resets = <&ccu 42>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
-@@ -224,8 +222,8 @@
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&ccu CLK_BUS_I2C1>;
-- resets = <&ccu RST_BUS_I2C1>;
-+ clocks = <&ccu 64>;
-+ resets = <&ccu 43>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
-@@ -235,8 +233,8 @@
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2b400 0x400>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&ccu CLK_BUS_I2C2>;
-- resets = <&ccu RST_BUS_I2C2>;
-+ clocks = <&ccu 65>;
-+ resets = <&ccu 44>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
diff --git a/target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch b/target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch
deleted file mode 100644
index f96570c858..0000000000
--- a/target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From a004ee350177ece3c059831ea49293d62aea7ca6 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.xyz>
-Date: Tue, 22 Nov 2016 23:58:29 +0800
-Subject: arm64: dts: allwinner: add USB1-related nodes of Allwinner A64
-
-Allwinner A64 have two HCI USB controllers, a OTG controller and a USB
-PHY device which have two ports. One of the port is wired to both a HCI
-USB controller and the OTG controller, which is currently not supported.
-The another one is only wired to a HCI controller, and the device node of
-OHCI/EHCI controller of the port can be added now.
-
-Also the A64 USB PHY device node is also added for the HCI controllers to
-work.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 46 +++++++++++++++++++++++++++
- 1 file changed, 46 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -42,8 +42,10 @@
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-+#include <dt-bindings/clock/sun50i-a64-ccu.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include <dt-bindings/reset/sun50i-a64-ccu.h>
-
- / {
- interrupt-parent = <&gic>;
-@@ -120,6 +122,50 @@
- #size-cells = <1>;
- ranges;
-
-+ usbphy: phy@01c19400 {
-+ compatible = "allwinner,sun50i-a64-usb-phy";
-+ reg = <0x01c19400 0x14>,
-+ <0x01c1b800 0x4>;
-+ reg-names = "phy_ctrl",
-+ "pmu1";
-+ clocks = <&ccu CLK_USB_PHY0>,
-+ <&ccu CLK_USB_PHY1>;
-+ clock-names = "usb0_phy",
-+ "usb1_phy";
-+ resets = <&ccu RST_USB_PHY0>,
-+ <&ccu RST_USB_PHY1>;
-+ reset-names = "usb0_reset",
-+ "usb1_reset";
-+ status = "disabled";
-+ #phy-cells = <1>;
-+ };
-+
-+ ehci1: usb@01c1b000 {
-+ compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
-+ reg = <0x01c1b000 0x100>;
-+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI1>,
-+ <&ccu CLK_BUS_EHCI1>,
-+ <&ccu CLK_USB_OHCI1>;
-+ resets = <&ccu RST_BUS_OHCI1>,
-+ <&ccu RST_BUS_EHCI1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci1: usb@01c1b400 {
-+ compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
-+ reg = <0x01c1b400 0x100>;
-+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI1>,
-+ <&ccu CLK_USB_OHCI1>;
-+ resets = <&ccu RST_BUS_OHCI1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
- ccu: clock@01c20000 {
- compatible = "allwinner,sun50i-a64-ccu";
- reg = <0x01c20000 0x400>;
diff --git a/target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch b/target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch
deleted file mode 100644
index 4c7d6dafe2..0000000000
--- a/target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From ac93c09cdbaf1229c21f67a5db1c3c6df7d503e5 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.xyz>
-Date: Tue, 22 Nov 2016 23:58:30 +0800
-Subject: arm64: dts: allwinner: sort the nodes in sun50i-a64-pine64.dts
-
-In this dts file, uart0 node is put before i2c1.
-
-Move the uart0 node to the end to satisfy alphebetical order.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -57,12 +57,6 @@
- };
- };
-
--&uart0 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-- status = "okay";
--};
--
- &i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-@@ -72,3 +66,9 @@
- &i2c1_pins {
- bias-pull-up;
- };
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
diff --git a/target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch b/target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch
deleted file mode 100644
index 451ec595c9..0000000000
--- a/target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From d49f9dbc8f0c4521fa56477d051a3bd1158f2595 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.xyz>
-Date: Tue, 22 Nov 2016 23:58:31 +0800
-Subject: arm64: dts: allwinner: enable EHCI1, OHCI1 and USB PHY nodes in
- Pine64
-
-Pine64 have two USB Type-A ports, which are wired to the two ports of
-A64 USB PHY, and the lower port is the EHCI/OHCI1 port.
-
-Enable the necessary nodes to enable the lower USB port to work.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -57,6 +57,10 @@
- };
- };
-
-+&ehci1 {
-+ status = "okay";
-+};
-+
- &i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-@@ -67,8 +71,16 @@
- bias-pull-up;
- };
-
-+&ohci1 {
-+ status = "okay";
-+};
-+
- &uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-+
-+&usbphy {
-+ status = "okay";
-+};
diff --git a/target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch b/target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch
deleted file mode 100644
index 804d00521b..0000000000
--- a/target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 972a3ecdf27f3ebdd1ce0dccd1b548ef3c04b8ed Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.xyz>
-Date: Wed, 23 Nov 2016 00:59:01 +0800
-Subject: arm64: dts: add MUSB node to Allwinner A64 dtsi
-
-Allwinner A64 SoC has a MUSB controller like the one in A33, so add
-a node for it, just use the compatible of A33 MUSB.
-
-Host mode is tested to work properly on Pine64 and will be added into
-the device tree of Pine64 in next patch.
-
-Peripheral mode is also tested on Pine64, by changing dr_mode property
-of usb_otg node and use a non-standard USB Type-A to Type-A cable.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -122,6 +122,19 @@
- #size-cells = <1>;
- ranges;
-
-+ usb_otg: usb@01c19000 {
-+ compatible = "allwinner,sun8i-a33-musb";
-+ reg = <0x01c19000 0x0400>;
-+ clocks = <&ccu CLK_BUS_OTG>;
-+ resets = <&ccu RST_BUS_OTG>;
-+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "mc";
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ extcon = <&usbphy 0>;
-+ status = "disabled";
-+ };
-+
- usbphy: phy@01c19400 {
- compatible = "allwinner,sun50i-a64-usb-phy";
- reg = <0x01c19400 0x14>,
diff --git a/target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch b/target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch
deleted file mode 100644
index 3992ab6510..0000000000
--- a/target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From f57e8384c5d2417fd8707c577d8e622fc1570b6c Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.xyz>
-Date: Wed, 23 Nov 2016 00:59:02 +0800
-Subject: arm64: dts: enable the MUSB controller of Pine64 in host-only mode
-
-A64 has a MUSB controller wired to the USB PHY 0, which is connected
-to the upper USB Type-A port of Pine64.
-
-As the port is a Type-A female port, enable it in host-only mode in the
-device tree, which makes devices with USB Type-A male port can work on
-this port (which is originally designed by Pine64 team).
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -81,6 +81,11 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
- &usbphy {
- status = "okay";
- };
diff --git a/target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch b/target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch
deleted file mode 100644
index d2d54e937f..0000000000
--- a/target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 4f9758302ccaf753cd4ba6a5eb740392a4d24773 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Tue, 24 Jan 2017 10:32:29 +0800
-Subject: arm64: dts: allwinner: Remove no longer used pinctrl/sun4i-a10.h
- header
-
-All dts files for the sunxi platform have been switched to the generic
-pinconf bindings. As a result, the sunxi specific pinctrl macros are
-no longer used.
-
-Remove the #include entry with the following command:
-
- sed -i -e '/pinctrl\/sun4i-a10.h/D' \
- arch/arm64/boot/dts/allwinner/*.dts?
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -44,7 +44,6 @@
-
- #include <dt-bindings/clock/sun50i-a64-ccu.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
--#include <dt-bindings/pinctrl/sun4i-a10.h>
- #include <dt-bindings/reset/sun50i-a64-ccu.h>
-
- / {
diff --git a/target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch b/target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch
deleted file mode 100644
index 1f91e9bead..0000000000
--- a/target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From f3dff3478a8a7b09f9a92023955a151584658893 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Thu, 6 Oct 2016 02:25:22 +0100
-Subject: arm64: allwinner: a64: Add MMC nodes
-
-The A64 has 3 MMC controllers, one of them being especially targeted to
-eMMC. Among other things, it has a data strobe signal and a 8 bits data
-width.
-
-The two other are more usual controllers that will have a 4 bits width at
-most and no data strobe signal, which limits it to more usual SD or MMC
-peripherals.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 39 +++++++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -121,6 +121,45 @@
- #size-cells = <1>;
- ranges;
-
-+ mmc0: mmc@1c0f000 {
-+ compatible = "allwinner,sun50i-a64-mmc";
-+ reg = <0x01c0f000 0x1000>;
-+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
-+ clock-names = "ahb", "mmc";
-+ resets = <&ccu RST_BUS_MMC0>;
-+ reset-names = "ahb";
-+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ mmc1: mmc@1c10000 {
-+ compatible = "allwinner,sun50i-a64-mmc";
-+ reg = <0x01c10000 0x1000>;
-+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
-+ clock-names = "ahb", "mmc";
-+ resets = <&ccu RST_BUS_MMC1>;
-+ reset-names = "ahb";
-+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ mmc2: mmc@1c11000 {
-+ compatible = "allwinner,sun50i-a64-emmc";
-+ reg = <0x01c11000 0x1000>;
-+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
-+ clock-names = "ahb", "mmc";
-+ resets = <&ccu RST_BUS_MMC2>;
-+ reset-names = "ahb";
-+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
- usb_otg: usb@01c19000 {
- compatible = "allwinner,sun8i-a33-musb";
- reg = <0x01c19000 0x0400>;
diff --git a/target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch b/target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch
deleted file mode 100644
index f5af0f819a..0000000000
--- a/target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From a3e8f4926248b3c12933aacec4432e9b6de004bb Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Mon, 9 Jan 2017 16:39:15 +0100
-Subject: arm64: allwinner: a64: Add MMC pinctrl nodes
-
-The A64 only has a single set of pins for each MMC controller. Since we
-already have boards that require all of them, let's add them to the DTSI.
-
-Reviewed-by: Andre Przywara <andre.przywara@arm.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -243,6 +243,31 @@
- function = "i2c1";
- };
-
-+ mmc0_pins: mmc0-pins {
-+ pins = "PF0", "PF1", "PF2", "PF3",
-+ "PF4", "PF5";
-+ function = "mmc0";
-+ drive-strength = <30>;
-+ bias-pull-up;
-+ };
-+
-+ mmc1_pins: mmc1-pins {
-+ pins = "PG0", "PG1", "PG2", "PG3",
-+ "PG4", "PG5";
-+ function = "mmc1";
-+ drive-strength = <30>;
-+ bias-pull-up;
-+ };
-+
-+ mmc2_pins: mmc2-pins {
-+ pins = "PC1", "PC5", "PC6", "PC8", "PC9",
-+ "PC10","PC11", "PC12", "PC13",
-+ "PC14", "PC15", "PC16";
-+ function = "mmc2";
-+ drive-strength = <30>;
-+ bias-pull-up;
-+ };
-+
- uart0_pins_a: uart0@0 {
- pins = "PB8", "PB9";
- function = "uart0";
diff --git a/target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch b/target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch
deleted file mode 100644
index c60e5104cf..0000000000
--- a/target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From ebe3ae29c6314217edf40d9ee23c36d610ff0fb8 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Tue, 10 Jan 2017 01:22:31 +0000
-Subject: arm64: allwinner: pine64: add MMC support
-
-All Pine64 boards connect an micro-SD card slot to the first MMC
-controller.
-Enable the respective DT node and specify the (always-on) regulator
-and card-detect pin.
-As a micro-SD slot does not feature a write-protect switch, we disable
-this feature.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -44,6 +44,8 @@
-
- #include "sun50i-a64.dtsi"
-
-+#include <dt-bindings/gpio/gpio.h>
-+
- / {
- model = "Pine64";
- compatible = "pine64,pine64", "allwinner,sun50i-a64";
-@@ -55,6 +57,13 @@
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ reg_vcc3v3: vcc3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
- };
-
- &ehci1 {
-@@ -71,6 +80,17 @@
- bias-pull-up;
- };
-
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins>;
-+ vmmc-supply = <&reg_vcc3v3>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
-+ cd-inverted;
-+ disable-wp;
-+ bus-width = <4>;
-+ status = "okay";
-+};
-+
- &ohci1 {
- status = "okay";
- };
diff --git a/target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch b/target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch
deleted file mode 100644
index 998d51435f..0000000000
--- a/target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From e7ba733d32cc9487b62b07219ad911c77764a681 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Tue, 10 Jan 2017 01:22:32 +0000
-Subject: arm64: allwinner: a64: add UART1 pin nodes
-
-On many boards UART1 connects to a Bluetooth chip, so add the pinctrl
-nodes for the only pins providing access to that UART. That includes
-those pins for hardware flow control (RTS/CTS).
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -272,6 +272,16 @@
- pins = "PB8", "PB9";
- function = "uart0";
- };
-+
-+ uart1_pins: uart1_pins {
-+ pins = "PG6", "PG7";
-+ function = "uart1";
-+ };
-+
-+ uart1_rts_cts_pins: uart1_rts_cts_pins {
-+ pins = "PG8", "PG9";
-+ function = "uart1";
-+ };
- };
-
- uart0: serial@1c28000 {
diff --git a/target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch b/target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch
deleted file mode 100644
index 19a3589708..0000000000
--- a/target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 791a9e001d3ba3b552888b0bf3c592a50b71f57e Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.xyz>
-Date: Tue, 4 Apr 2017 17:50:58 +0800
-Subject: arm64: allwinner: a64: add r_ccu node
-
-A64 SoC have a CCU (r_ccu) in PRCM block.
-
-Add the device node for it.
-
-The mux 3 of R_CCU is an internal oscillator, which is 16MHz according
-to the user manual, and has only 30% accuracy based on our experience
-on older SoCs. The real mesaured value of it on two Pine64 boards is
-around 11MHz, which is around 70% of 16MHz.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -98,6 +98,14 @@
- clock-output-names = "osc32k";
- };
-
-+ iosc: internal-osc-clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <16000000>;
-+ clock-accuracy = <300000000>;
-+ clock-output-names = "iosc";
-+ };
-+
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
-@@ -389,5 +397,14 @@
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- };
-+
-+ r_ccu: clock@1f01400 {
-+ compatible = "allwinner,sun50i-a64-r-ccu";
-+ reg = <0x01f01400 0x100>;
-+ clocks = <&osc24M>, <&osc32k>, <&iosc>;
-+ clock-names = "hosc", "losc", "iosc";
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
- };
- };
diff --git a/target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch b/target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch
deleted file mode 100644
index ff541ce63e..0000000000
--- a/target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From ec4279053a6434f685246e022be95d2a62f8c608 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.xyz>
-Date: Tue, 4 Apr 2017 17:51:00 +0800
-Subject: arm64: allwinner: a64: add R_PIO pinctrl node
-
-Allwinner A64 have a dedicated pin controller to manage the PL pin bank.
-As the driver and the required clock support are added, add the device
-node for it.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -406,5 +406,17 @@
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-+
-+ r_pio: pinctrl@01f02c00 {
-+ compatible = "allwinner,sun50i-a64-r-pinctrl";
-+ reg = <0x01f02c00 0x400>;
-+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
-+ clock-names = "apb", "hosc", "losc";
-+ gpio-controller;
-+ #gpio-cells = <3>;
-+ interrupt-controller;
-+ #interrupt-cells = <3>;
-+ };
- };
- };
diff --git a/target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch b/target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch
deleted file mode 100644
index 0d7803775e..0000000000
--- a/target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 0d98479738b950e30bb4f782d60099d44076ad67 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Wed, 5 Apr 2017 22:30:34 +0800
-Subject: arm64: allwinner: a64: add pmu0 regs for USB PHY
-
-The USB PHY in A64 has a "pmu0" region, which controls the EHCI/OHCI
-controller pair that can be connected to the PHY0.
-
-Add the MMIO region for PHY node.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -184,8 +184,10 @@
- usbphy: phy@01c19400 {
- compatible = "allwinner,sun50i-a64-usb-phy";
- reg = <0x01c19400 0x14>,
-+ <0x01c1a800 0x4>,
- <0x01c1b800 0x4>;
- reg-names = "phy_ctrl",
-+ "pmu0",
- "pmu1";
- clocks = <&ccu CLK_USB_PHY0>,
- <&ccu CLK_USB_PHY1>;
diff --git a/target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch b/target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch
deleted file mode 100644
index 319dba6591..0000000000
--- a/target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From f74994a94063bc85ac1d6ad677ed06b5279c101f Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Wed, 31 May 2017 15:58:24 +0800
-Subject: arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
-
-The AR100 clock within the R_CCU (PRCM) has the PLL_PERIPH0 as one of
-its parents.
-
-This adds the reference in the device tree describing this relationship.
-This patch uses a raw number for the clock index to ease merging by
-avoiding cross tree dependencies.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -403,8 +403,9 @@
- r_ccu: clock@1f01400 {
- compatible = "allwinner,sun50i-a64-r-ccu";
- reg = <0x01f01400 0x100>;
-- clocks = <&osc24M>, <&osc32k>, <&iosc>;
-- clock-names = "hosc", "losc", "iosc";
-+ clocks = <&osc24M>, <&osc32k>, <&iosc>,
-+ <&ccu 11>;
-+ clock-names = "hosc", "losc", "iosc", "pll-periph";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
diff --git a/target/linux/sunxi/patches-4.9/0030-pinctrl-sunxi-Rework-the-pin-config-building-code.patch b/target/linux/sunxi/patches-4.9/0030-pinctrl-sunxi-Rework-the-pin-config-building-code.patch
deleted file mode 100644
index 498581712d..0000000000
--- a/target/linux/sunxi/patches-4.9/0030-pinctrl-sunxi-Rework-the-pin-config-building-code.patch
+++ /dev/null
@@ -1,251 +0,0 @@
-From f233dbca6227703eaae2f67d6d9c79819773f16b Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 11 Oct 2016 17:45:59 +0200
-Subject: pinctrl: sunxi: Rework the pin config building code
-
-In order to support more easily the generic pinctrl properties, rework the
-pinctrl maps configuration and split it into several sub-functions.
-
-One of the side-effects from that rework is that we only parse the pin
-configuration once, since it's going to be common to every pin, instead of
-having to parsing once for each pin.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 178 +++++++++++++++++++++++++---------
- 1 file changed, 130 insertions(+), 48 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -145,6 +145,110 @@ static int sunxi_pctrl_get_group_pins(st
- return 0;
- }
-
-+static bool sunxi_pctrl_has_bias_prop(struct device_node *node)
-+{
-+ return of_find_property(node, "allwinner,pull", NULL);
-+}
-+
-+static bool sunxi_pctrl_has_drive_prop(struct device_node *node)
-+{
-+ return of_find_property(node, "allwinner,drive", NULL);
-+}
-+
-+static int sunxi_pctrl_parse_bias_prop(struct device_node *node)
-+{
-+ u32 val;
-+
-+ if (of_property_read_u32(node, "allwinner,pull", &val))
-+ return -EINVAL;
-+
-+ switch (val) {
-+ case 1:
-+ return PIN_CONFIG_BIAS_PULL_UP;
-+ case 2:
-+ return PIN_CONFIG_BIAS_PULL_DOWN;
-+ }
-+
-+ return -EINVAL;
-+}
-+
-+static int sunxi_pctrl_parse_drive_prop(struct device_node *node)
-+{
-+ u32 val;
-+
-+ if (of_property_read_u32(node, "allwinner,drive", &val))
-+ return -EINVAL;
-+
-+ return (val + 1) * 10;
-+}
-+
-+static const char *sunxi_pctrl_parse_function_prop(struct device_node *node)
-+{
-+ const char *function;
-+ int ret;
-+
-+ ret = of_property_read_string(node, "allwinner,function", &function);
-+ if (!ret)
-+ return function;
-+
-+ return NULL;
-+}
-+
-+static const char *sunxi_pctrl_find_pins_prop(struct device_node *node,
-+ int *npins)
-+{
-+ int count;
-+
-+ count = of_property_count_strings(node, "allwinner,pins");
-+ if (count > 0) {
-+ *npins = count;
-+ return "allwinner,pins";
-+ }
-+
-+ return NULL;
-+}
-+
-+static unsigned long *sunxi_pctrl_build_pin_config(struct device_node *node,
-+ unsigned int *len)
-+{
-+ unsigned long *pinconfig;
-+ unsigned int configlen = 0, idx = 0;
-+
-+ if (sunxi_pctrl_has_drive_prop(node))
-+ configlen++;
-+ if (sunxi_pctrl_has_bias_prop(node))
-+ configlen++;
-+
-+ pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL);
-+ if (!pinconfig)
-+ return NULL;
-+
-+ if (sunxi_pctrl_has_drive_prop(node)) {
-+ int drive = sunxi_pctrl_parse_drive_prop(node);
-+ if (drive < 0)
-+ goto err_free;
-+
-+ pinconfig[idx++] = pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH,
-+ drive);
-+ }
-+
-+ if (sunxi_pctrl_has_bias_prop(node)) {
-+ int pull = sunxi_pctrl_parse_bias_prop(node);
-+ if (pull < 0)
-+ goto err_free;
-+
-+ pinconfig[idx++] = pinconf_to_config_packed(pull, 0);
-+ }
-+
-+
-+ *len = configlen;
-+ return pinconfig;
-+
-+err_free:
-+ kfree(pinconfig);
-+ return NULL;
-+}
-+
- static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
- struct device_node *node,
- struct pinctrl_map **map,
-@@ -153,38 +257,45 @@ static int sunxi_pctrl_dt_node_to_map(st
- struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
- unsigned long *pinconfig;
- struct property *prop;
-- const char *function;
-+ const char *function, *pin_prop;
- const char *group;
-- int ret, nmaps, i = 0;
-- u32 val;
-+ int ret, npins, nmaps, configlen = 0, i = 0;
-
- *map = NULL;
- *num_maps = 0;
-
-- ret = of_property_read_string(node, "allwinner,function", &function);
-- if (ret) {
-- dev_err(pctl->dev,
-- "missing allwinner,function property in node %s\n",
-+ function = sunxi_pctrl_parse_function_prop(node);
-+ if (!function) {
-+ dev_err(pctl->dev, "missing function property in node %s\n",
- node->name);
- return -EINVAL;
- }
-
-- nmaps = of_property_count_strings(node, "allwinner,pins") * 2;
-- if (nmaps < 0) {
-- dev_err(pctl->dev,
-- "missing allwinner,pins property in node %s\n",
-+ pin_prop = sunxi_pctrl_find_pins_prop(node, &npins);
-+ if (!pin_prop) {
-+ dev_err(pctl->dev, "missing pins property in node %s\n",
- node->name);
- return -EINVAL;
- }
-
-+ /*
-+ * We have two maps for each pin: one for the function, one
-+ * for the configuration (bias, strength, etc)
-+ */
-+ nmaps = npins * 2;
- *map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL);
- if (!*map)
- return -ENOMEM;
-
-- of_property_for_each_string(node, "allwinner,pins", prop, group) {
-+ pinconfig = sunxi_pctrl_build_pin_config(node, &configlen);
-+ if (!pinconfig) {
-+ ret = -EINVAL;
-+ goto err_free_map;
-+ }
-+
-+ of_property_for_each_string(node, pin_prop, prop, group) {
- struct sunxi_pinctrl_group *grp =
- sunxi_pinctrl_find_group_by_name(pctl, group);
-- int j = 0, configlen = 0;
-
- if (!grp) {
- dev_err(pctl->dev, "unknown pin %s", group);
-@@ -207,34 +318,6 @@ static int sunxi_pctrl_dt_node_to_map(st
-
- (*map)[i].type = PIN_MAP_TYPE_CONFIGS_GROUP;
- (*map)[i].data.configs.group_or_pin = group;
--
-- if (of_find_property(node, "allwinner,drive", NULL))
-- configlen++;
-- if (of_find_property(node, "allwinner,pull", NULL))
-- configlen++;
--
-- pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL);
-- if (!pinconfig) {
-- kfree(*map);
-- return -ENOMEM;
-- }
--
-- if (!of_property_read_u32(node, "allwinner,drive", &val)) {
-- u16 strength = (val + 1) * 10;
-- pinconfig[j++] =
-- pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH,
-- strength);
-- }
--
-- if (!of_property_read_u32(node, "allwinner,pull", &val)) {
-- enum pin_config_param pull = PIN_CONFIG_END;
-- if (val == 1)
-- pull = PIN_CONFIG_BIAS_PULL_UP;
-- else if (val == 2)
-- pull = PIN_CONFIG_BIAS_PULL_DOWN;
-- pinconfig[j++] = pinconf_to_config_packed(pull, 0);
-- }
--
- (*map)[i].data.configs.configs = pinconfig;
- (*map)[i].data.configs.num_configs = configlen;
-
-@@ -244,19 +327,18 @@ static int sunxi_pctrl_dt_node_to_map(st
- *num_maps = nmaps;
-
- return 0;
-+
-+err_free_map:
-+ kfree(map);
-+ return ret;
- }
-
- static void sunxi_pctrl_dt_free_map(struct pinctrl_dev *pctldev,
- struct pinctrl_map *map,
- unsigned num_maps)
- {
-- int i;
--
-- for (i = 0; i < num_maps; i++) {
-- if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
-- kfree(map[i].data.configs.configs);
-- }
--
-+ /* All the maps have the same pin config, free only the first one */
-+ kfree(map[0].data.configs.configs);
- kfree(map);
- }
-
diff --git a/target/linux/sunxi/patches-4.9/0031-pinctrl-sunxi-Use-macros-from-bindings-header-file-f.patch b/target/linux/sunxi/patches-4.9/0031-pinctrl-sunxi-Use-macros-from-bindings-header-file-f.patch
deleted file mode 100644
index 39be965422..0000000000
--- a/target/linux/sunxi/patches-4.9/0031-pinctrl-sunxi-Use-macros-from-bindings-header-file-f.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 42676fa4aa87eda4fc762df495d4bde2ddc4bfce Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 11 Oct 2016 17:46:00 +0200
-Subject: pinctrl: sunxi: Use macros from bindings header file for DT parsing
-
-Since we have some bindings header for our hardcoded flags, let's use them
-when we can.
-
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -28,6 +28,8 @@
- #include <linux/platform_device.h>
- #include <linux/slab.h>
-
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
- #include "../core.h"
- #include "pinctrl-sunxi.h"
-
-@@ -163,9 +165,9 @@ static int sunxi_pctrl_parse_bias_prop(s
- return -EINVAL;
-
- switch (val) {
-- case 1:
-+ case SUN4I_PINCTRL_PULL_UP:
- return PIN_CONFIG_BIAS_PULL_UP;
-- case 2:
-+ case SUN4I_PINCTRL_PULL_DOWN:
- return PIN_CONFIG_BIAS_PULL_DOWN;
- }
-
diff --git a/target/linux/sunxi/patches-4.9/0032-pinctrl-sunxi-Handle-bias-disable.patch b/target/linux/sunxi/patches-4.9/0032-pinctrl-sunxi-Handle-bias-disable.patch
deleted file mode 100644
index 61d6102c92..0000000000
--- a/target/linux/sunxi/patches-4.9/0032-pinctrl-sunxi-Handle-bias-disable.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 07fe64ba213f36ca8f6ffd8c4d5893f022744fdb Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 11 Oct 2016 17:46:01 +0200
-Subject: pinctrl: sunxi: Handle bias disable
-
-So far, putting NO_PULL in allwinner,pull was ignored, behaving like if
-that property was not there at all.
-
-Obviously, this is not the right thing to do, and in that case, we really
-need to just disable the bias.
-
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -165,6 +165,8 @@ static int sunxi_pctrl_parse_bias_prop(s
- return -EINVAL;
-
- switch (val) {
-+ case SUN4I_PINCTRL_NO_PULL:
-+ return PIN_CONFIG_BIAS_DISABLE;
- case SUN4I_PINCTRL_PULL_UP:
- return PIN_CONFIG_BIAS_PULL_UP;
- case SUN4I_PINCTRL_PULL_DOWN:
-@@ -401,6 +403,12 @@ static int sunxi_pconf_group_set(struct
- | dlevel << sunxi_dlevel_offset(pin),
- pctl->membase + sunxi_dlevel_reg(pin));
- break;
-+ case PIN_CONFIG_BIAS_DISABLE:
-+ val = readl(pctl->membase + sunxi_pull_reg(pin));
-+ mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
-+ writel((val & ~mask),
-+ pctl->membase + sunxi_pull_reg(pin));
-+ break;
- case PIN_CONFIG_BIAS_PULL_UP:
- val = readl(pctl->membase + sunxi_pull_reg(pin));
- mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
diff --git a/target/linux/sunxi/patches-4.9/0033-pinctrl-sunxi-Support-generic-binding.patch b/target/linux/sunxi/patches-4.9/0033-pinctrl-sunxi-Support-generic-binding.patch
deleted file mode 100644
index 35c6876812..0000000000
--- a/target/linux/sunxi/patches-4.9/0033-pinctrl-sunxi-Support-generic-binding.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From cefbf1a1b29531a970bc2908a50a75d6474fcc38 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 20 Oct 2016 15:49:03 +0200
-Subject: pinctrl: sunxi: Support generic binding
-
-Our bindings are mostly irrelevant now that we have generic pinctrl
-bindings that cover exactly the same uses cases.
-
-Add support for the new ones, and obviously keep our old binding support in
-order to keep the ABI stable.
-
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 48 +++++++++++++++++++++++++++++++++--
- 1 file changed, 46 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -149,18 +149,33 @@ static int sunxi_pctrl_get_group_pins(st
-
- static bool sunxi_pctrl_has_bias_prop(struct device_node *node)
- {
-- return of_find_property(node, "allwinner,pull", NULL);
-+ return of_find_property(node, "bias-pull-up", NULL) ||
-+ of_find_property(node, "bias-pull-down", NULL) ||
-+ of_find_property(node, "bias-disable", NULL) ||
-+ of_find_property(node, "allwinner,pull", NULL);
- }
-
- static bool sunxi_pctrl_has_drive_prop(struct device_node *node)
- {
-- return of_find_property(node, "allwinner,drive", NULL);
-+ return of_find_property(node, "drive-strength", NULL) ||
-+ of_find_property(node, "allwinner,drive", NULL);
- }
-
- static int sunxi_pctrl_parse_bias_prop(struct device_node *node)
- {
- u32 val;
-
-+ /* Try the new style binding */
-+ if (of_find_property(node, "bias-pull-up", NULL))
-+ return PIN_CONFIG_BIAS_PULL_UP;
-+
-+ if (of_find_property(node, "bias-pull-down", NULL))
-+ return PIN_CONFIG_BIAS_PULL_DOWN;
-+
-+ if (of_find_property(node, "bias-disable", NULL))
-+ return PIN_CONFIG_BIAS_DISABLE;
-+
-+ /* And fall back to the old binding */
- if (of_property_read_u32(node, "allwinner,pull", &val))
- return -EINVAL;
-
-@@ -180,6 +195,21 @@ static int sunxi_pctrl_parse_drive_prop(
- {
- u32 val;
-
-+ /* Try the new style binding */
-+ if (!of_property_read_u32(node, "drive-strength", &val)) {
-+ /* We can't go below 10mA ... */
-+ if (val < 10)
-+ return -EINVAL;
-+
-+ /* ... and only up to 40 mA ... */
-+ if (val > 40)
-+ val = 40;
-+
-+ /* by steps of 10 mA */
-+ return rounddown(val, 10);
-+ }
-+
-+ /* And then fall back to the old binding */
- if (of_property_read_u32(node, "allwinner,drive", &val))
- return -EINVAL;
-
-@@ -191,6 +221,12 @@ static const char *sunxi_pctrl_parse_fun
- const char *function;
- int ret;
-
-+ /* Try the generic binding */
-+ ret = of_property_read_string(node, "function", &function);
-+ if (!ret)
-+ return function;
-+
-+ /* And fall back to our legacy one */
- ret = of_property_read_string(node, "allwinner,function", &function);
- if (!ret)
- return function;
-@@ -203,6 +239,14 @@ static const char *sunxi_pctrl_find_pins
- {
- int count;
-
-+ /* Try the generic binding */
-+ count = of_property_count_strings(node, "pins");
-+ if (count > 0) {
-+ *npins = count;
-+ return "pins";
-+ }
-+
-+ /* And fall back to our legacy one */
- count = of_property_count_strings(node, "allwinner,pins");
- if (count > 0) {
- *npins = count;
diff --git a/target/linux/sunxi/patches-4.9/0034-pinctrl-sunxi-Deal-with-configless-pins.patch b/target/linux/sunxi/patches-4.9/0034-pinctrl-sunxi-Deal-with-configless-pins.patch
deleted file mode 100644
index 119ab2b8f9..0000000000
--- a/target/linux/sunxi/patches-4.9/0034-pinctrl-sunxi-Deal-with-configless-pins.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From e11dee2e98f8abc99ad5336796576a827853ccfa Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 20 Oct 2016 15:49:02 +0200
-Subject: pinctrl: sunxi: Deal with configless pins
-
-Even though the our binding had the assumption that the allwinner,pull and
-allwinner,drive properties were optional, the code never took that into
-account.
-
-Fix that.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 51 +++++++++++++++++++++++++----------
- 1 file changed, 37 insertions(+), 14 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -261,20 +261,29 @@ static unsigned long *sunxi_pctrl_build_
- {
- unsigned long *pinconfig;
- unsigned int configlen = 0, idx = 0;
-+ int ret;
-
- if (sunxi_pctrl_has_drive_prop(node))
- configlen++;
- if (sunxi_pctrl_has_bias_prop(node))
- configlen++;
-
-+ /*
-+ * If we don't have any configuration, bail out
-+ */
-+ if (!configlen)
-+ return NULL;
-+
- pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL);
- if (!pinconfig)
-- return NULL;
-+ return ERR_PTR(-ENOMEM);
-
- if (sunxi_pctrl_has_drive_prop(node)) {
- int drive = sunxi_pctrl_parse_drive_prop(node);
-- if (drive < 0)
-+ if (drive < 0) {
-+ ret = drive;
- goto err_free;
-+ }
-
- pinconfig[idx++] = pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH,
- drive);
-@@ -282,8 +291,10 @@ static unsigned long *sunxi_pctrl_build_
-
- if (sunxi_pctrl_has_bias_prop(node)) {
- int pull = sunxi_pctrl_parse_bias_prop(node);
-- if (pull < 0)
-+ if (pull < 0) {
-+ ret = pull;
- goto err_free;
-+ }
-
- pinconfig[idx++] = pinconf_to_config_packed(pull, 0);
- }
-@@ -294,7 +305,7 @@ static unsigned long *sunxi_pctrl_build_
-
- err_free:
- kfree(pinconfig);
-- return NULL;
-+ return ERR_PTR(ret);
- }
-
- static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
-@@ -328,7 +339,10 @@ static int sunxi_pctrl_dt_node_to_map(st
-
- /*
- * We have two maps for each pin: one for the function, one
-- * for the configuration (bias, strength, etc)
-+ * for the configuration (bias, strength, etc).
-+ *
-+ * We might be slightly overshooting, since we might not have
-+ * any configuration.
- */
- nmaps = npins * 2;
- *map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL);
-@@ -336,8 +350,8 @@ static int sunxi_pctrl_dt_node_to_map(st
- return -ENOMEM;
-
- pinconfig = sunxi_pctrl_build_pin_config(node, &configlen);
-- if (!pinconfig) {
-- ret = -EINVAL;
-+ if (IS_ERR(pinconfig)) {
-+ ret = PTR_ERR(pinconfig);
- goto err_free_map;
- }
-
-@@ -364,15 +378,24 @@ static int sunxi_pctrl_dt_node_to_map(st
-
- i++;
-
-- (*map)[i].type = PIN_MAP_TYPE_CONFIGS_GROUP;
-- (*map)[i].data.configs.group_or_pin = group;
-- (*map)[i].data.configs.configs = pinconfig;
-- (*map)[i].data.configs.num_configs = configlen;
--
-- i++;
-+ if (pinconfig) {
-+ (*map)[i].type = PIN_MAP_TYPE_CONFIGS_GROUP;
-+ (*map)[i].data.configs.group_or_pin = group;
-+ (*map)[i].data.configs.configs = pinconfig;
-+ (*map)[i].data.configs.num_configs = configlen;
-+ i++;
-+ }
- }
-
-- *num_maps = nmaps;
-+ *num_maps = i;
-+
-+ /*
-+ * We know have the number of maps we need, we can resize our
-+ * map array
-+ */
-+ *map = krealloc(*map, i * sizeof(struct pinctrl_map), GFP_KERNEL);
-+ if (!map)
-+ return -ENOMEM;
-
- return 0;
-
diff --git a/target/linux/sunxi/patches-4.9/0035-pinctrl-sunxi-make-bool-drivers-explicitly-non-modul.patch b/target/linux/sunxi/patches-4.9/0035-pinctrl-sunxi-make-bool-drivers-explicitly-non-modul.patch
deleted file mode 100644
index 8ab535c30f..0000000000
--- a/target/linux/sunxi/patches-4.9/0035-pinctrl-sunxi-make-bool-drivers-explicitly-non-modul.patch
+++ /dev/null
@@ -1,437 +0,0 @@
-From 0c8c6ba00cbf2c0a6164aa41d43d017d65caf321 Mon Sep 17 00:00:00 2001
-From: Paul Gortmaker <paul.gortmaker@windriver.com>
-Date: Sat, 29 Oct 2016 20:00:30 -0400
-Subject: pinctrl: sunxi: make bool drivers explicitly non-modular
-
-None of the Kconfigs for any of these drivers are tristate,
-meaning that they currently are not being built as a module by anyone.
-
-Lets remove the modular code that is essentially orphaned, so that
-when reading the drivers there is no doubt they are builtin-only. All
-drivers get essentially the same change, so they are handled in batch.
-
-Changes are (1) use builtin_platform_driver, (2) use init.h header
-(3) delete module_exit related code, (4) delete MODULE_DEVICE_TABLE,
-and (5) delete MODULE_LICENCE/MODULE_AUTHOR and associated tags.
-
-Since module_platform_driver() uses the same init level priority as
-builtin_platform_driver() the init ordering remains unchanged with
-this commit.
-
-Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
-
-We do delete the MODULE_LICENSE etc. tags since all that information
-is already contained at the top of each file in the comments.
-
-Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
-Cc: Chen-Yu Tsai <wens@csie.org>
-Cc: Hans de Goede <hdegoede@redhat.com>
-Cc: Linus Walleij <linus.walleij@linaro.org>
-Cc: Patrice Chotard <patrice.chotard@st.com>
-Cc: Hongzhou Yang <hongzhou.yang@mediatek.com>
-Cc: Fabian Frederick <fabf@skynet.be>
-Cc: Maxime Coquelin <maxime.coquelin@st.com>
-Cc: Vishnu Patekar <vishnupatekar0510@gmail.com>
-Cc: Mylene Josserand <mylene.josserand@free-electrons.com>
-Cc: linux-gpio@vger.kernel.org
-Cc: linux-arm-kernel@lists.infradead.org
-Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-gr8.c | 9 ++-------
- drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c | 9 ++-------
- drivers/pinctrl/sunxi/pinctrl-sun5i-a10s.c | 9 ++-------
- drivers/pinctrl/sunxi/pinctrl-sun5i-a13.c | 9 ++-------
- drivers/pinctrl/sunxi/pinctrl-sun6i-a31-r.c | 10 ++--------
- drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c | 9 ++-------
- drivers/pinctrl/sunxi/pinctrl-sun6i-a31s.c | 9 ++-------
- drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c | 9 ++-------
- drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c | 11 ++---------
- drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c | 10 ++--------
- drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c | 9 ++-------
- drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c | 9 ++-------
- drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 9 ++-------
- 13 files changed, 26 insertions(+), 95 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-gr8.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-gr8.c
-@@ -12,7 +12,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -525,7 +525,6 @@ static const struct of_device_id sun5i_g
- { .compatible = "nextthing,gr8-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun5i_gr8_pinctrl_match);
-
- static struct platform_driver sun5i_gr8_pinctrl_driver = {
- .probe = sun5i_gr8_pinctrl_probe,
-@@ -534,8 +533,4 @@ static struct platform_driver sun5i_gr8_
- .of_match_table = sun5i_gr8_pinctrl_match,
- },
- };
--module_platform_driver(sun5i_gr8_pinctrl_driver);
--
--MODULE_AUTHOR("Mylene Josserand <mylene.josserand@free-electrons.com");
--MODULE_DESCRIPTION("NextThing GR8 pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun5i_gr8_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c
-@@ -10,7 +10,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -1036,7 +1036,6 @@ static const struct of_device_id sun4i_a
- { .compatible = "allwinner,sun4i-a10-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun4i_a10_pinctrl_match);
-
- static struct platform_driver sun4i_a10_pinctrl_driver = {
- .probe = sun4i_a10_pinctrl_probe,
-@@ -1045,8 +1044,4 @@ static struct platform_driver sun4i_a10_
- .of_match_table = sun4i_a10_pinctrl_match,
- },
- };
--module_platform_driver(sun4i_a10_pinctrl_driver);
--
--MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
--MODULE_DESCRIPTION("Allwinner A10 pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun4i_a10_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun5i-a10s.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun5i-a10s.c
-@@ -10,7 +10,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -674,7 +674,6 @@ static const struct of_device_id sun5i_a
- { .compatible = "allwinner,sun5i-a10s-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun5i_a10s_pinctrl_match);
-
- static struct platform_driver sun5i_a10s_pinctrl_driver = {
- .probe = sun5i_a10s_pinctrl_probe,
-@@ -683,8 +682,4 @@ static struct platform_driver sun5i_a10s
- .of_match_table = sun5i_a10s_pinctrl_match,
- },
- };
--module_platform_driver(sun5i_a10s_pinctrl_driver);
--
--MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
--MODULE_DESCRIPTION("Allwinner A10s pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun5i_a10s_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun5i-a13.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun5i-a13.c
-@@ -10,7 +10,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -392,7 +392,6 @@ static const struct of_device_id sun5i_a
- { .compatible = "allwinner,sun5i-a13-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun5i_a13_pinctrl_match);
-
- static struct platform_driver sun5i_a13_pinctrl_driver = {
- .probe = sun5i_a13_pinctrl_probe,
-@@ -401,8 +400,4 @@ static struct platform_driver sun5i_a13_
- .of_match_table = sun5i_a13_pinctrl_match,
- },
- };
--module_platform_driver(sun5i_a13_pinctrl_driver);
--
--MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
--MODULE_DESCRIPTION("Allwinner A13 pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun5i_a13_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun6i-a31-r.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun6i-a31-r.c
-@@ -12,7 +12,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -136,7 +136,6 @@ static const struct of_device_id sun6i_a
- { .compatible = "allwinner,sun6i-a31-r-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun6i_a31_r_pinctrl_match);
-
- static struct platform_driver sun6i_a31_r_pinctrl_driver = {
- .probe = sun6i_a31_r_pinctrl_probe,
-@@ -145,9 +144,4 @@ static struct platform_driver sun6i_a31_
- .of_match_table = sun6i_a31_r_pinctrl_match,
- },
- };
--module_platform_driver(sun6i_a31_r_pinctrl_driver);
--
--MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com");
--MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
--MODULE_DESCRIPTION("Allwinner A31 R_PIO pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun6i_a31_r_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c
-@@ -10,7 +10,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -934,7 +934,6 @@ static const struct of_device_id sun6i_a
- { .compatible = "allwinner,sun6i-a31-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun6i_a31_pinctrl_match);
-
- static struct platform_driver sun6i_a31_pinctrl_driver = {
- .probe = sun6i_a31_pinctrl_probe,
-@@ -943,8 +942,4 @@ static struct platform_driver sun6i_a31_
- .of_match_table = sun6i_a31_pinctrl_match,
- },
- };
--module_platform_driver(sun6i_a31_pinctrl_driver);
--
--MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
--MODULE_DESCRIPTION("Allwinner A31 pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun6i_a31_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun6i-a31s.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun6i-a31s.c
-@@ -11,7 +11,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -798,7 +798,6 @@ static const struct of_device_id sun6i_a
- { .compatible = "allwinner,sun6i-a31s-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun6i_a31s_pinctrl_match);
-
- static struct platform_driver sun6i_a31s_pinctrl_driver = {
- .probe = sun6i_a31s_pinctrl_probe,
-@@ -807,8 +806,4 @@ static struct platform_driver sun6i_a31s
- .of_match_table = sun6i_a31s_pinctrl_match,
- },
- };
--module_platform_driver(sun6i_a31s_pinctrl_driver);
--
--MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
--MODULE_DESCRIPTION("Allwinner A31s pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun6i_a31s_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
-@@ -10,7 +10,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -1045,7 +1045,6 @@ static const struct of_device_id sun7i_a
- { .compatible = "allwinner,sun7i-a20-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun7i_a20_pinctrl_match);
-
- static struct platform_driver sun7i_a20_pinctrl_driver = {
- .probe = sun7i_a20_pinctrl_probe,
-@@ -1054,8 +1053,4 @@ static struct platform_driver sun7i_a20_
- .of_match_table = sun7i_a20_pinctrl_match,
- },
- };
--module_platform_driver(sun7i_a20_pinctrl_driver);
--
--MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
--MODULE_DESCRIPTION("Allwinner A20 pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun7i_a20_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
-@@ -15,7 +15,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -123,7 +123,6 @@ static const struct of_device_id sun8i_a
- { .compatible = "allwinner,sun8i-a23-r-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun8i_a23_r_pinctrl_match);
-
- static struct platform_driver sun8i_a23_r_pinctrl_driver = {
- .probe = sun8i_a23_r_pinctrl_probe,
-@@ -132,10 +131,4 @@ static struct platform_driver sun8i_a23_
- .of_match_table = sun8i_a23_r_pinctrl_match,
- },
- };
--module_platform_driver(sun8i_a23_r_pinctrl_driver);
--
--MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
--MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com");
--MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
--MODULE_DESCRIPTION("Allwinner A23 R_PIO pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun8i_a23_r_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c
-@@ -14,7 +14,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -575,7 +575,6 @@ static const struct of_device_id sun8i_a
- { .compatible = "allwinner,sun8i-a23-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun8i_a23_pinctrl_match);
-
- static struct platform_driver sun8i_a23_pinctrl_driver = {
- .probe = sun8i_a23_pinctrl_probe,
-@@ -584,9 +583,4 @@ static struct platform_driver sun8i_a23_
- .of_match_table = sun8i_a23_pinctrl_match,
- },
- };
--module_platform_driver(sun8i_a23_pinctrl_driver);
--
--MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
--MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
--MODULE_DESCRIPTION("Allwinner A23 pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun8i_a23_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c
-@@ -12,7 +12,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -498,7 +498,6 @@ static const struct of_device_id sun8i_a
- { .compatible = "allwinner,sun8i-a33-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun8i_a33_pinctrl_match);
-
- static struct platform_driver sun8i_a33_pinctrl_driver = {
- .probe = sun8i_a33_pinctrl_probe,
-@@ -507,8 +506,4 @@ static struct platform_driver sun8i_a33_
- .of_match_table = sun8i_a33_pinctrl_match,
- },
- };
--module_platform_driver(sun8i_a33_pinctrl_driver);
--
--MODULE_AUTHOR("Vishnu Patekar <vishnupatekar0510@gmail.com>");
--MODULE_DESCRIPTION("Allwinner a33 pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun8i_a33_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c
-@@ -12,7 +12,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -587,7 +587,6 @@ static const struct of_device_id sun8i_a
- { .compatible = "allwinner,sun8i-a83t-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun8i_a83t_pinctrl_match);
-
- static struct platform_driver sun8i_a83t_pinctrl_driver = {
- .probe = sun8i_a83t_pinctrl_probe,
-@@ -596,8 +595,4 @@ static struct platform_driver sun8i_a83t
- .of_match_table = sun8i_a83t_pinctrl_match,
- },
- };
--module_platform_driver(sun8i_a83t_pinctrl_driver);
--
--MODULE_AUTHOR("Vishnu Patekar <vishnupatekar0510@gmail.com>");
--MODULE_DESCRIPTION("Allwinner a83t pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun8i_a83t_pinctrl_driver);
---- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
-@@ -10,7 +10,7 @@
- * warranty of any kind, whether express or implied.
- */
-
--#include <linux/module.h>
-+#include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -733,7 +733,6 @@ static const struct of_device_id sun9i_a
- { .compatible = "allwinner,sun9i-a80-pinctrl", },
- {}
- };
--MODULE_DEVICE_TABLE(of, sun9i_a80_pinctrl_match);
-
- static struct platform_driver sun9i_a80_pinctrl_driver = {
- .probe = sun9i_a80_pinctrl_probe,
-@@ -742,8 +741,4 @@ static struct platform_driver sun9i_a80_
- .of_match_table = sun9i_a80_pinctrl_match,
- },
- };
--module_platform_driver(sun9i_a80_pinctrl_driver);
--
--MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
--MODULE_DESCRIPTION("Allwinner A80 pinctrl driver");
--MODULE_LICENSE("GPL");
-+builtin_platform_driver(sun9i_a80_pinctrl_driver);
diff --git a/target/linux/sunxi/patches-4.9/0036-pinctrl-sunxi-Free-configs-in-pinctrl_map-only-if-it.patch b/target/linux/sunxi/patches-4.9/0036-pinctrl-sunxi-Free-configs-in-pinctrl_map-only-if-it.patch
deleted file mode 100644
index 02c5f568c8..0000000000
--- a/target/linux/sunxi/patches-4.9/0036-pinctrl-sunxi-Free-configs-in-pinctrl_map-only-if-it.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 88f01a1bd0e0dbd01b65907023dbe53cf524ea2a Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Fri, 11 Nov 2016 10:35:10 +0800
-Subject: pinctrl: sunxi: Free configs in pinctrl_map only if it is a config
- map
-
-In the recently refactored sunxi pinctrl library, we are only allocating
-one set of pin configs for each pinmux setting node. When the pinctrl_map
-structure is freed, the pin configs should also be freed. However the
-code assumed the first map would contain the configs, which actually
-never happens, as the mux function map gets added first.
-
-The proper way to do this is to look through all the maps and free the
-first one whose type is actually PIN_MAP_TYPE_CONFIGS_GROUP.
-
-Also slightly expand the comment explaining this.
-
-Fixes: f233dbca6227 ("pinctrl: sunxi: Rework the pin config building code")
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 17 +++++++++++++++--
- 1 file changed, 15 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -408,8 +408,21 @@ static void sunxi_pctrl_dt_free_map(stru
- struct pinctrl_map *map,
- unsigned num_maps)
- {
-- /* All the maps have the same pin config, free only the first one */
-- kfree(map[0].data.configs.configs);
-+ int i;
-+
-+ /* pin config is never in the first map */
-+ for (i = 1; i < num_maps; i++) {
-+ if (map[i].type != PIN_MAP_TYPE_CONFIGS_GROUP)
-+ continue;
-+
-+ /*
-+ * All the maps share the same pin config,
-+ * free only the first one we find.
-+ */
-+ kfree(map[i].data.configs.configs);
-+ break;
-+ }
-+
- kfree(map);
- }
-
diff --git a/target/linux/sunxi/patches-4.9/0037-pinctrl-sunxi-Fix-PIN_CONFIG_BIAS_PULL_-DOWN-UP-argu.patch b/target/linux/sunxi/patches-4.9/0037-pinctrl-sunxi-Fix-PIN_CONFIG_BIAS_PULL_-DOWN-UP-argu.patch
deleted file mode 100644
index 4921240f79..0000000000
--- a/target/linux/sunxi/patches-4.9/0037-pinctrl-sunxi-Fix-PIN_CONFIG_BIAS_PULL_-DOWN-UP-argu.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 223dba00b4072efc590c7d648f230db1b44186b9 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Fri, 11 Nov 2016 17:50:34 +0800
-Subject: pinctrl: sunxi: Fix PIN_CONFIG_BIAS_PULL_{DOWN,UP} argument
-
-According to pinconf-generic.h, the argument for
-PIN_CONFIG_BIAS_PULL_{DOWN,UP} is non-zero if the bias is enabled
-with a pull up/down resistor, zero if it is directly connected
-to VDD or ground.
-
-Since Allwinner hardware uses a weak pull resistor internally,
-the argument should be 1.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -291,12 +291,16 @@ static unsigned long *sunxi_pctrl_build_
-
- if (sunxi_pctrl_has_bias_prop(node)) {
- int pull = sunxi_pctrl_parse_bias_prop(node);
-+ int arg = 0;
- if (pull < 0) {
- ret = pull;
- goto err_free;
- }
-
-- pinconfig[idx++] = pinconf_to_config_packed(pull, 0);
-+ if (pull != PIN_CONFIG_BIAS_DISABLE)
-+ arg = 1; /* hardware uses weak pull resistors */
-+
-+ pinconfig[idx++] = pinconf_to_config_packed(pull, arg);
- }
-
-
diff --git a/target/linux/sunxi/patches-4.9/0038-pinctrl-sunxi-Add-support-for-fetching-pinconf-setti.patch b/target/linux/sunxi/patches-4.9/0038-pinctrl-sunxi-Add-support-for-fetching-pinconf-setti.patch
deleted file mode 100644
index d7972197ff..0000000000
--- a/target/linux/sunxi/patches-4.9/0038-pinctrl-sunxi-Add-support-for-fetching-pinconf-setti.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From c5fda170e87a4bdaeb278f7e50f7a1f654e94eb5 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Fri, 11 Nov 2016 17:50:35 +0800
-Subject: pinctrl: sunxi: Add support for fetching pinconf settings from
- hardware
-
-The sunxi pinctrl driver only caches whatever pinconf setting was last
-set on a given pingroup. This is not particularly helpful, nor is it
-correct.
-
-Fix this by actually reading the hardware registers and returning
-the correct results or error codes. Also filter out unsupported
-pinconf settings. Since this driver has a peculiar setup of 1 pin
-per group, we can support both pin and pingroup pinconf setting
-read back with the same code. The sunxi_pconf_reg helper and code
-structure is inspired by pinctrl-msm.
-
-With this done we can also claim to support generic pinconf, by
-setting .is_generic = true in pinconf_ops.
-
-Also remove the cached config value. The behavior of this was never
-correct, as it only cached 1 setting instead of all of them. Since
-we can now read back settings directly from the hardware, it is no
-longer required.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 86 +++++++++++++++++++++++++++++++++--
- drivers/pinctrl/sunxi/pinctrl-sunxi.h | 1 -
- 2 files changed, 81 insertions(+), 6 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -438,15 +438,91 @@ static const struct pinctrl_ops sunxi_pc
- .get_group_pins = sunxi_pctrl_get_group_pins,
- };
-
-+static int sunxi_pconf_reg(unsigned pin, enum pin_config_param param,
-+ u32 *offset, u32 *shift, u32 *mask)
-+{
-+ switch (param) {
-+ case PIN_CONFIG_DRIVE_STRENGTH:
-+ *offset = sunxi_dlevel_reg(pin);
-+ *shift = sunxi_dlevel_offset(pin);
-+ *mask = DLEVEL_PINS_MASK;
-+ break;
-+
-+ case PIN_CONFIG_BIAS_PULL_UP:
-+ case PIN_CONFIG_BIAS_PULL_DOWN:
-+ case PIN_CONFIG_BIAS_DISABLE:
-+ *offset = sunxi_pull_reg(pin);
-+ *shift = sunxi_pull_offset(pin);
-+ *mask = PULL_PINS_MASK;
-+ break;
-+
-+ default:
-+ return -ENOTSUPP;
-+ }
-+
-+ return 0;
-+}
-+
-+static int sunxi_pconf_get(struct pinctrl_dev *pctldev, unsigned pin,
-+ unsigned long *config)
-+{
-+ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+ enum pin_config_param param = pinconf_to_config_param(*config);
-+ u32 offset, shift, mask, val;
-+ u16 arg;
-+ int ret;
-+
-+ pin -= pctl->desc->pin_base;
-+
-+ ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask);
-+ if (ret < 0)
-+ return ret;
-+
-+ val = (readl(pctl->membase + offset) >> shift) & mask;
-+
-+ switch (pinconf_to_config_param(*config)) {
-+ case PIN_CONFIG_DRIVE_STRENGTH:
-+ arg = (val + 1) * 10;
-+ break;
-+
-+ case PIN_CONFIG_BIAS_PULL_UP:
-+ if (val != SUN4I_PINCTRL_PULL_UP)
-+ return -EINVAL;
-+ arg = 1; /* hardware is weak pull-up */
-+ break;
-+
-+ case PIN_CONFIG_BIAS_PULL_DOWN:
-+ if (val != SUN4I_PINCTRL_PULL_DOWN)
-+ return -EINVAL;
-+ arg = 1; /* hardware is weak pull-down */
-+ break;
-+
-+ case PIN_CONFIG_BIAS_DISABLE:
-+ if (val != SUN4I_PINCTRL_NO_PULL)
-+ return -EINVAL;
-+ arg = 0;
-+ break;
-+
-+ default:
-+ /* sunxi_pconf_reg should catch anything unsupported */
-+ WARN_ON(1);
-+ return -ENOTSUPP;
-+ }
-+
-+ *config = pinconf_to_config_packed(param, arg);
-+
-+ return 0;
-+}
-+
- static int sunxi_pconf_group_get(struct pinctrl_dev *pctldev,
- unsigned group,
- unsigned long *config)
- {
- struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+ struct sunxi_pinctrl_group *g = &pctl->groups[group];
-
-- *config = pctl->groups[group].config;
--
-- return 0;
-+ /* We only support 1 pin per group. Chain it to the pin callback */
-+ return sunxi_pconf_get(pctldev, g->pin, config);
- }
-
- static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,
-@@ -508,8 +584,6 @@ static int sunxi_pconf_group_set(struct
- default:
- break;
- }
-- /* cache the config value */
-- g->config = configs[i];
- } /* for each config */
-
- spin_unlock_irqrestore(&pctl->lock, flags);
-@@ -518,6 +592,8 @@ static int sunxi_pconf_group_set(struct
- }
-
- static const struct pinconf_ops sunxi_pconf_ops = {
-+ .is_generic = true,
-+ .pin_config_get = sunxi_pconf_get,
- .pin_config_group_get = sunxi_pconf_group_get,
- .pin_config_group_set = sunxi_pconf_group_set,
- };
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
-@@ -109,7 +109,6 @@ struct sunxi_pinctrl_function {
-
- struct sunxi_pinctrl_group {
- const char *name;
-- unsigned long config;
- unsigned pin;
- };
-
diff --git a/target/linux/sunxi/patches-4.9/0039-pinctrl-sunxi-Make-sunxi_pconf_group_set-use-sunxi_p.patch b/target/linux/sunxi/patches-4.9/0039-pinctrl-sunxi-Make-sunxi_pconf_group_set-use-sunxi_p.patch
deleted file mode 100644
index 7555933f63..0000000000
--- a/target/linux/sunxi/patches-4.9/0039-pinctrl-sunxi-Make-sunxi_pconf_group_set-use-sunxi_p.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 51814827190214986c452a166718bf12d32211c7 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Fri, 11 Nov 2016 17:50:36 +0800
-Subject: pinctrl: sunxi: Make sunxi_pconf_group_set use sunxi_pconf_reg helper
-
-The sunxi_pconf_reg helper introduced in the last patch gives us the
-chance to rework sunxi_pconf_group_set to have it match the structure
-of sunxi_pconf_(group_)get and make it easier to understand.
-
-For each config to set, it:
-
- 1. checks if the parameter is supported.
- 2. checks if the argument is within limits.
- 3. converts argument to the register value.
- 4. writes to the register with spinlock held.
-
-As a result the function now blocks unsupported config parameters,
-instead of silently ignoring them.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 64 +++++++++++++++++------------------
- 1 file changed, 32 insertions(+), 32 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -532,23 +532,27 @@ static int sunxi_pconf_group_set(struct
- {
- struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
- struct sunxi_pinctrl_group *g = &pctl->groups[group];
-- unsigned long flags;
- unsigned pin = g->pin - pctl->desc->pin_base;
-- u32 val, mask;
-- u16 strength;
-- u8 dlevel;
- int i;
-
-- spin_lock_irqsave(&pctl->lock, flags);
--
- for (i = 0; i < num_configs; i++) {
-- switch (pinconf_to_config_param(configs[i])) {
-+ enum pin_config_param param;
-+ unsigned long flags;
-+ u32 offset, shift, mask, reg;
-+ u16 arg, val;
-+ int ret;
-+
-+ param = pinconf_to_config_param(configs[i]);
-+ arg = pinconf_to_config_argument(configs[i]);
-+
-+ ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask);
-+ if (ret < 0)
-+ return ret;
-+
-+ switch (param) {
- case PIN_CONFIG_DRIVE_STRENGTH:
-- strength = pinconf_to_config_argument(configs[i]);
-- if (strength > 40) {
-- spin_unlock_irqrestore(&pctl->lock, flags);
-+ if (arg < 10 || arg > 40)
- return -EINVAL;
-- }
- /*
- * We convert from mA to what the register expects:
- * 0: 10mA
-@@ -556,37 +560,33 @@ static int sunxi_pconf_group_set(struct
- * 2: 30mA
- * 3: 40mA
- */
-- dlevel = strength / 10 - 1;
-- val = readl(pctl->membase + sunxi_dlevel_reg(pin));
-- mask = DLEVEL_PINS_MASK << sunxi_dlevel_offset(pin);
-- writel((val & ~mask)
-- | dlevel << sunxi_dlevel_offset(pin),
-- pctl->membase + sunxi_dlevel_reg(pin));
-+ val = arg / 10 - 1;
- break;
- case PIN_CONFIG_BIAS_DISABLE:
-- val = readl(pctl->membase + sunxi_pull_reg(pin));
-- mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
-- writel((val & ~mask),
-- pctl->membase + sunxi_pull_reg(pin));
-+ val = 0;
- break;
- case PIN_CONFIG_BIAS_PULL_UP:
-- val = readl(pctl->membase + sunxi_pull_reg(pin));
-- mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
-- writel((val & ~mask) | 1 << sunxi_pull_offset(pin),
-- pctl->membase + sunxi_pull_reg(pin));
-+ if (arg == 0)
-+ return -EINVAL;
-+ val = 1;
- break;
- case PIN_CONFIG_BIAS_PULL_DOWN:
-- val = readl(pctl->membase + sunxi_pull_reg(pin));
-- mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
-- writel((val & ~mask) | 2 << sunxi_pull_offset(pin),
-- pctl->membase + sunxi_pull_reg(pin));
-+ if (arg == 0)
-+ return -EINVAL;
-+ val = 2;
- break;
- default:
-- break;
-+ /* sunxi_pconf_reg should catch anything unsupported */
-+ WARN_ON(1);
-+ return -ENOTSUPP;
- }
-- } /* for each config */
-
-- spin_unlock_irqrestore(&pctl->lock, flags);
-+ spin_lock_irqsave(&pctl->lock, flags);
-+ reg = readl(pctl->membase + offset);
-+ reg &= ~(mask << shift);
-+ writel(reg | val << shift, pctl->membase + offset);
-+ spin_unlock_irqrestore(&pctl->lock, flags);
-+ } /* for each config */
-
- return 0;
- }
diff --git a/target/linux/sunxi/patches-4.9/0040-pinctrl-sunxi-Add-support-for-interrupt-debouncing.patch b/target/linux/sunxi/patches-4.9/0040-pinctrl-sunxi-Add-support-for-interrupt-debouncing.patch
deleted file mode 100644
index 01cbe31bef..0000000000
--- a/target/linux/sunxi/patches-4.9/0040-pinctrl-sunxi-Add-support-for-interrupt-debouncing.patch
+++ /dev/null
@@ -1,171 +0,0 @@
-From 7c926492d38a3feef4b4b29c91b7c03eb1b8b546 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Mon, 14 Nov 2016 21:53:03 +0100
-Subject: pinctrl: sunxi: Add support for interrupt debouncing
-
-The pin controller found in the Allwinner SoCs has support for interrupts
-debouncing.
-
-However, this is not done per-pin, preventing us from using the generic
-pinconf binding for that, but per irq bank, which, depending on the SoC,
-ranges from one to five.
-
-Introduce a device-wide property to deal with this using a microsecond
-resolution. We can re-use the per-pin input-debounce property for that, so
-let's do it!
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 14 ++++
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 84 ++++++++++++++++++++++
- drivers/pinctrl/sunxi/pinctrl-sunxi.h | 7 ++
- 3 files changed, 105 insertions(+)
-
---- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
-+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
-@@ -28,6 +28,20 @@ Required properties:
- - reg: Should contain the register physical address and length for the
- pin controller.
-
-+- clocks: phandle to the clocks feeding the pin controller:
-+ - "apb": the gated APB parent clock
-+ - "hosc": the high frequency oscillator in the system
-+ - "losc": the low frequency oscillator in the system
-+
-+Note: For backward compatibility reasons, the hosc and losc clocks are only
-+required if you need to use the optional input-debounce property. Any new
-+device tree should set them.
-+
-+Optional properties:
-+ - input-debounce: Array of debouncing periods in microseconds. One period per
-+ irq bank found in the controller. 0 if no setup required.
-+
-+
- Please refer to pinctrl-bindings.txt in this directory for details of the
- common pinctrl bindings used by client devices.
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -1122,6 +1122,88 @@ static int sunxi_pinctrl_build_state(str
- return 0;
- }
-
-+static int sunxi_pinctrl_get_debounce_div(struct clk *clk, int freq, int *diff)
-+{
-+ unsigned long clock = clk_get_rate(clk);
-+ unsigned int best_diff = ~0, best_div;
-+ int i;
-+
-+ for (i = 0; i < 8; i++) {
-+ int cur_diff = abs(freq - (clock >> i));
-+
-+ if (cur_diff < best_diff) {
-+ best_diff = cur_diff;
-+ best_div = i;
-+ }
-+ }
-+
-+ *diff = best_diff;
-+ return best_div;
-+}
-+
-+static int sunxi_pinctrl_setup_debounce(struct sunxi_pinctrl *pctl,
-+ struct device_node *node)
-+{
-+ unsigned int hosc_diff, losc_diff;
-+ unsigned int hosc_div, losc_div;
-+ struct clk *hosc, *losc;
-+ u8 div, src;
-+ int i, ret;
-+
-+ /* Deal with old DTs that didn't have the oscillators */
-+ if (of_count_phandle_with_args(node, "clocks", "#clock-cells") != 3)
-+ return 0;
-+
-+ /* If we don't have any setup, bail out */
-+ if (!of_find_property(node, "input-debounce", NULL))
-+ return 0;
-+
-+ losc = devm_clk_get(pctl->dev, "losc");
-+ if (IS_ERR(losc))
-+ return PTR_ERR(losc);
-+
-+ hosc = devm_clk_get(pctl->dev, "hosc");
-+ if (IS_ERR(hosc))
-+ return PTR_ERR(hosc);
-+
-+ for (i = 0; i < pctl->desc->irq_banks; i++) {
-+ unsigned long debounce_freq;
-+ u32 debounce;
-+
-+ ret = of_property_read_u32_index(node, "input-debounce",
-+ i, &debounce);
-+ if (ret)
-+ return ret;
-+
-+ if (!debounce)
-+ continue;
-+
-+ debounce_freq = DIV_ROUND_CLOSEST(USEC_PER_SEC, debounce);
-+ losc_div = sunxi_pinctrl_get_debounce_div(losc,
-+ debounce_freq,
-+ &losc_diff);
-+
-+ hosc_div = sunxi_pinctrl_get_debounce_div(hosc,
-+ debounce_freq,
-+ &hosc_diff);
-+
-+ if (hosc_diff < losc_diff) {
-+ div = hosc_div;
-+ src = 1;
-+ } else {
-+ div = losc_div;
-+ src = 0;
-+ }
-+
-+ writel(src | div << 4,
-+ pctl->membase +
-+ sunxi_irq_debounce_reg_from_bank(i,
-+ pctl->desc->irq_bank_base));
-+ }
-+
-+ return 0;
-+}
-+
- int sunxi_pinctrl_init(struct platform_device *pdev,
- const struct sunxi_pinctrl_desc *desc)
- {
-@@ -1284,6 +1366,8 @@ int sunxi_pinctrl_init(struct platform_d
- pctl);
- }
-
-+ sunxi_pinctrl_setup_debounce(pctl, node);
-+
- dev_info(&pdev->dev, "initialized sunXi PIO driver\n");
-
- return 0;
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
-@@ -69,6 +69,8 @@
- #define IRQ_STATUS_IRQ_BITS 1
- #define IRQ_STATUS_IRQ_MASK ((1 << IRQ_STATUS_IRQ_BITS) - 1)
-
-+#define IRQ_DEBOUNCE_REG 0x218
-+
- #define IRQ_MEM_SIZE 0x20
-
- #define IRQ_EDGE_RISING 0x00
-@@ -265,6 +267,11 @@ static inline u32 sunxi_irq_ctrl_offset(
- return irq_num * IRQ_CTRL_IRQ_BITS;
- }
-
-+static inline u32 sunxi_irq_debounce_reg_from_bank(u8 bank, unsigned bank_base)
-+{
-+ return IRQ_DEBOUNCE_REG + (bank_base + bank) * IRQ_MEM_SIZE;
-+}
-+
- static inline u32 sunxi_irq_status_reg_from_bank(u8 bank, unsigned bank_base)
- {
- return IRQ_STATUS_REG + (bank_base + bank) * IRQ_MEM_SIZE;
diff --git a/target/linux/sunxi/patches-4.9/0041-pinctrl-sunxi-fix-theoretical-uninitialized-variable.patch b/target/linux/sunxi/patches-4.9/0041-pinctrl-sunxi-fix-theoretical-uninitialized-variable.patch
deleted file mode 100644
index 69de015b67..0000000000
--- a/target/linux/sunxi/patches-4.9/0041-pinctrl-sunxi-fix-theoretical-uninitialized-variable.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From d8a22212737314cc02692cc90eda7d844fa20257 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Wed, 16 Nov 2016 15:18:18 +0100
-Subject: pinctrl: sunxi: fix theoretical uninitialized variable access
-
-gcc warns about a way that it could use an uninitialized variable:
-
-drivers/pinctrl/sunxi/pinctrl-sunxi.c: In function 'sunxi_pinctrl_init':
-drivers/pinctrl/sunxi/pinctrl-sunxi.c:1191:8: error: 'best_div' may be used uninitialized in this function [-Werror=maybe-uninitialized]
-
-This cannot really happen except if 'freq' is UINT_MAX and 'clock' is
-zero, and both of these are forbidden. To shut up the warning anyway,
-this changes the logic to initialize the return code to the first
-divider value before looking at the others.
-
-Fixes: 7c926492d38a ("pinctrl: sunxi: Add support for interrupt debouncing")
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -1125,10 +1125,13 @@ static int sunxi_pinctrl_build_state(str
- static int sunxi_pinctrl_get_debounce_div(struct clk *clk, int freq, int *diff)
- {
- unsigned long clock = clk_get_rate(clk);
-- unsigned int best_diff = ~0, best_div;
-+ unsigned int best_diff, best_div;
- int i;
-
-- for (i = 0; i < 8; i++) {
-+ best_diff = abs(freq - clock);
-+ best_div = 0;
-+
-+ for (i = 1; i < 8; i++) {
- int cur_diff = abs(freq - (clock >> i));
-
- if (cur_diff < best_diff) {
diff --git a/target/linux/sunxi/patches-4.9/0042-pinctrl-sunxi-Testing-the-wrong-variable.patch b/target/linux/sunxi/patches-4.9/0042-pinctrl-sunxi-Testing-the-wrong-variable.patch
deleted file mode 100644
index 8ed4f27b4c..0000000000
--- a/target/linux/sunxi/patches-4.9/0042-pinctrl-sunxi-Testing-the-wrong-variable.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From b3cde198b17f504643cc1eeffc4623f03326f436 Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Fri, 18 Nov 2016 14:35:57 +0300
-Subject: pinctrl: sunxi: Testing the wrong variable
-
-Smatch complains that we dereference "map" before testing it for NULL
-which is true. We should be testing "*map" instead. Also on the error
-path, we should free *map and set it to NULL.
-
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -398,13 +398,14 @@ static int sunxi_pctrl_dt_node_to_map(st
- * map array
- */
- *map = krealloc(*map, i * sizeof(struct pinctrl_map), GFP_KERNEL);
-- if (!map)
-+ if (!*map)
- return -ENOMEM;
-
- return 0;
-
- err_free_map:
-- kfree(map);
-+ kfree(*map);
-+ *map = NULL;
- return ret;
- }
-
diff --git a/target/linux/sunxi/patches-4.9/0043-pinctrl-sunxi-Don-t-enforce-bias-disable-for-now.patch b/target/linux/sunxi/patches-4.9/0043-pinctrl-sunxi-Don-t-enforce-bias-disable-for-now.patch
deleted file mode 100644
index d6e639af52..0000000000
--- a/target/linux/sunxi/patches-4.9/0043-pinctrl-sunxi-Don-t-enforce-bias-disable-for-now.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 2154d94b40ea2a5de05245521371d0461bb0d669 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Mon, 23 Jan 2017 09:21:30 +0100
-Subject: pinctrl: sunxi: Don't enforce bias disable (for now)
-
-Commit 07fe64ba213f ("pinctrl: sunxi: Handle bias disable") actually
-enforced enforced the disabling of the pull up/down resistors instead of
-ignoring it like it was done before.
-
-This was part of a wider rework to switch to the generic pinconf bindings,
-and was meant to be merged together with DT patches that were switching to
-it, and removing what was considered default values by both the binding and
-the boards. This included no bias on a pin.
-
-However, those DT patches were delayed to 4.11, which would be fine only
-for a significant number boards having the bias setup wrong, which in turns
-break the MMC on those boards (and possibly other devices too).
-
-In order to avoid conflicts as much as possible, bring back the old
-behaviour for 4.10, and we'll revert that commit once all the DT bits will
-have landed.
-
-Tested-by: Priit Laes <plaes@plaes.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
-@@ -564,8 +564,7 @@ static int sunxi_pconf_group_set(struct
- val = arg / 10 - 1;
- break;
- case PIN_CONFIG_BIAS_DISABLE:
-- val = 0;
-- break;
-+ continue;
- case PIN_CONFIG_BIAS_PULL_UP:
- if (arg == 0)
- return -EINVAL;
diff --git a/target/linux/sunxi/patches-4.9/0045-arm-dts-sun8i-add-common-dtsi-file-for-nanopi-SBCs.patch b/target/linux/sunxi/patches-4.9/0045-arm-dts-sun8i-add-common-dtsi-file-for-nanopi-SBCs.patch
deleted file mode 100644
index c304f7937f..0000000000
--- a/target/linux/sunxi/patches-4.9/0045-arm-dts-sun8i-add-common-dtsi-file-for-nanopi-SBCs.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From 49f01c9e14b3476cbdf9623c4812c43f6485830b Mon Sep 17 00:00:00 2001
-From: Milo Kim <woogyom.kim@gmail.com>
-Date: Fri, 28 Oct 2016 15:59:01 +0900
-Subject: ARM: dts: sun8i: Add common dtsi file for NanoPi SBCs
-
-(backported from kernel 4.13)
-
-This patch provides a common file for NanoPi M1 and Neo SBC.
-
-Those have common features below.
- * UART0
- * 2 LEDs
- * USB host (EHCI3, OHCI3) and PHY
- * MicroSD
- * GPIO key switch
-
-Cc: James Pettigrew <james@innovum.com.au>
-Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
-@@ -0,0 +1,137 @@
-+/*
-+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
-+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun8i-h3.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
-+
-+ status {
-+ label = "nanopi:blue:status";
-+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ pwr {
-+ label = "nanopi:green:pwr";
-+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ };
-+ };
-+
-+ r_gpio_keys {
-+ compatible = "gpio-keys";
-+ input-name = "k1";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sw_r_npi>;
-+
-+ k1@0 {
-+ label = "k1";
-+ linux,code = <KEY_POWER>;
-+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&ehci3 {
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ bus-width = <4>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
-+ cd-inverted;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-+ status = "okay";
-+ vmmc-supply = <&reg_vcc3v3>;
-+};
-+
-+&ohci3 {
-+ status = "okay";
-+};
-+
-+&pio {
-+ leds_npi: led_pins@0 {
-+ pins = "PA10";
-+ function = "gpio_out";
-+ };
-+};
-+
-+&r_pio {
-+ leds_r_npi: led_pins@0 {
-+ pins = "PL10";
-+ function = "gpio_out";
-+ };
-+
-+ sw_r_npi: key_pins@0 {
-+ pins = "PL3";
-+ function = "gpio_in";
-+ };
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ status = "okay";
-+};
diff --git a/target/linux/sunxi/patches-4.9/0050-stmmac-form-4-10.patch b/target/linux/sunxi/patches-4.9/0050-stmmac-form-4-10.patch
deleted file mode 100644
index 22d62f0960..0000000000
--- a/target/linux/sunxi/patches-4.9/0050-stmmac-form-4-10.patch
+++ /dev/null
@@ -1,3497 +0,0 @@
---- a/Documentation/devicetree/bindings/net/stmmac.txt
-+++ b/Documentation/devicetree/bindings/net/stmmac.txt
-@@ -1,7 +1,7 @@
- * STMicroelectronics 10/100/1000 Ethernet driver (GMAC)
-
- Required properties:
--- compatible: Should be "snps,dwmac-<ip_version>" "snps,dwmac"
-+- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac"
- For backwards compatibility: "st,spear600-gmac" is also supported.
- - reg: Address and length of the register set for the device
- - interrupt-parent: Should be the phandle for the interrupt controller
-@@ -34,7 +34,13 @@ Optional properties:
- platforms.
- - tx-fifo-depth: See ethernet.txt file in the same directory
- - rx-fifo-depth: See ethernet.txt file in the same directory
--- snps,pbl Programmable Burst Length
-+- snps,pbl Programmable Burst Length (tx and rx)
-+- snps,txpbl Tx Programmable Burst Length. Only for GMAC and newer.
-+ If set, DMA tx will use this value rather than snps,pbl.
-+- snps,rxpbl Rx Programmable Burst Length. Only for GMAC and newer.
-+ If set, DMA rx will use this value rather than snps,pbl.
-+- snps,no-pbl-x8 Don't multiply the pbl/txpbl/rxpbl values by 8.
-+ For core rev < 3.50, don't multiply the values by 4.
- - snps,aal Address-Aligned Beats
- - snps,fixed-burst Program the DMA to use the fixed burst mode
- - snps,mixed-burst Program the DMA to use the mixed burst mode
-@@ -50,6 +56,8 @@ Optional properties:
- - snps,ps-speed: port selection speed that can be passed to the core when
- PCS is supported. For example, this is used in case of SGMII
- and MAC2MAC connection.
-+- snps,tso: this enables the TSO feature otherwise it will be managed by
-+ MAC HW capability register. Only for GMAC4 and newer.
- - AXI BUS Mode parameters: below the list of all the parameters to program the
- AXI register inside the DMA module:
- - snps,lpi_en: enable Low Power Interface
-@@ -62,8 +70,6 @@ Optional properties:
- - snps,fb: fixed-burst
- - snps,mb: mixed-burst
- - snps,rb: rebuild INCRx Burst
-- - snps,tso: this enables the TSO feature otherwise it will be managed by
-- MAC HW capability register.
- - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
-
- Examples:
---- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
-+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
-@@ -69,6 +69,17 @@ config DWMAC_MESON
- the stmmac device driver. This driver is used for Meson6,
- Meson8, Meson8b and GXBB SoCs.
-
-+config DWMAC_OXNAS
-+ tristate "Oxford Semiconductor OXNAS dwmac support"
-+ default ARCH_OXNAS
-+ depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST)
-+ select MFD_SYSCON
-+ help
-+ Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs.
-+
-+ This selects the Oxford Semiconductor OXNASSoC glue layer support for
-+ the stmmac device driver. This driver is used for OX820.
-+
- config DWMAC_ROCKCHIP
- tristate "Rockchip dwmac support"
- default ARCH_ROCKCHIP
---- a/drivers/net/ethernet/stmicro/stmmac/Makefile
-+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-
- obj-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
- obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o
- obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o dwmac-meson8b.o
-+obj-$(CONFIG_DWMAC_OXNAS) += dwmac-oxnas.o
- obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
- obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o
- obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
---- a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
-@@ -34,7 +34,7 @@ static int stmmac_jumbo_frm(void *p, str
- unsigned int entry = priv->cur_tx;
- struct dma_desc *desc = priv->dma_tx + entry;
- unsigned int nopaged_len = skb_headlen(skb);
-- unsigned int bmax;
-+ unsigned int bmax, des2;
- unsigned int i = 1, len;
-
- if (priv->plat->enh_desc)
-@@ -44,11 +44,12 @@ static int stmmac_jumbo_frm(void *p, str
-
- len = nopaged_len - bmax;
-
-- desc->des2 = dma_map_single(priv->device, skb->data,
-- bmax, DMA_TO_DEVICE);
-- if (dma_mapping_error(priv->device, desc->des2))
-+ des2 = dma_map_single(priv->device, skb->data,
-+ bmax, DMA_TO_DEVICE);
-+ desc->des2 = cpu_to_le32(des2);
-+ if (dma_mapping_error(priv->device, des2))
- return -1;
-- priv->tx_skbuff_dma[entry].buf = desc->des2;
-+ priv->tx_skbuff_dma[entry].buf = des2;
- priv->tx_skbuff_dma[entry].len = bmax;
- /* do not close the descriptor and do not set own bit */
- priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum, STMMAC_CHAIN_MODE,
-@@ -60,12 +61,13 @@ static int stmmac_jumbo_frm(void *p, str
- desc = priv->dma_tx + entry;
-
- if (len > bmax) {
-- desc->des2 = dma_map_single(priv->device,
-- (skb->data + bmax * i),
-- bmax, DMA_TO_DEVICE);
-- if (dma_mapping_error(priv->device, desc->des2))
-+ des2 = dma_map_single(priv->device,
-+ (skb->data + bmax * i),
-+ bmax, DMA_TO_DEVICE);
-+ desc->des2 = cpu_to_le32(des2);
-+ if (dma_mapping_error(priv->device, des2))
- return -1;
-- priv->tx_skbuff_dma[entry].buf = desc->des2;
-+ priv->tx_skbuff_dma[entry].buf = des2;
- priv->tx_skbuff_dma[entry].len = bmax;
- priv->hw->desc->prepare_tx_desc(desc, 0, bmax, csum,
- STMMAC_CHAIN_MODE, 1,
-@@ -73,12 +75,13 @@ static int stmmac_jumbo_frm(void *p, str
- len -= bmax;
- i++;
- } else {
-- desc->des2 = dma_map_single(priv->device,
-- (skb->data + bmax * i), len,
-- DMA_TO_DEVICE);
-- if (dma_mapping_error(priv->device, desc->des2))
-+ des2 = dma_map_single(priv->device,
-+ (skb->data + bmax * i), len,
-+ DMA_TO_DEVICE);
-+ desc->des2 = cpu_to_le32(des2);
-+ if (dma_mapping_error(priv->device, des2))
- return -1;
-- priv->tx_skbuff_dma[entry].buf = desc->des2;
-+ priv->tx_skbuff_dma[entry].buf = des2;
- priv->tx_skbuff_dma[entry].len = len;
- /* last descriptor can be set now */
- priv->hw->desc->prepare_tx_desc(desc, 0, len, csum,
-@@ -119,19 +122,19 @@ static void stmmac_init_dma_chain(void *
- struct dma_extended_desc *p = (struct dma_extended_desc *)des;
- for (i = 0; i < (size - 1); i++) {
- dma_phy += sizeof(struct dma_extended_desc);
-- p->basic.des3 = (unsigned int)dma_phy;
-+ p->basic.des3 = cpu_to_le32((unsigned int)dma_phy);
- p++;
- }
-- p->basic.des3 = (unsigned int)phy_addr;
-+ p->basic.des3 = cpu_to_le32((unsigned int)phy_addr);
-
- } else {
- struct dma_desc *p = (struct dma_desc *)des;
- for (i = 0; i < (size - 1); i++) {
- dma_phy += sizeof(struct dma_desc);
-- p->des3 = (unsigned int)dma_phy;
-+ p->des3 = cpu_to_le32((unsigned int)dma_phy);
- p++;
- }
-- p->des3 = (unsigned int)phy_addr;
-+ p->des3 = cpu_to_le32((unsigned int)phy_addr);
- }
- }
-
-@@ -144,10 +147,10 @@ static void stmmac_refill_desc3(void *pr
- * 1588-2002 time stamping is enabled, hence reinitialize it
- * to keep explicit chaining in the descriptor.
- */
-- p->des3 = (unsigned int)(priv->dma_rx_phy +
-- (((priv->dirty_rx) + 1) %
-- DMA_RX_SIZE) *
-- sizeof(struct dma_desc));
-+ p->des3 = cpu_to_le32((unsigned int)(priv->dma_rx_phy +
-+ (((priv->dirty_rx) + 1) %
-+ DMA_RX_SIZE) *
-+ sizeof(struct dma_desc)));
- }
-
- static void stmmac_clean_desc3(void *priv_ptr, struct dma_desc *p)
-@@ -161,9 +164,9 @@ static void stmmac_clean_desc3(void *pri
- * 1588-2002 time stamping is enabled, hence reinitialize it
- * to keep explicit chaining in the descriptor.
- */
-- p->des3 = (unsigned int)((priv->dma_tx_phy +
-- ((priv->dirty_tx + 1) % DMA_TX_SIZE))
-- * sizeof(struct dma_desc));
-+ p->des3 = cpu_to_le32((unsigned int)((priv->dma_tx_phy +
-+ ((priv->dirty_tx + 1) % DMA_TX_SIZE))
-+ * sizeof(struct dma_desc)));
- }
-
- const struct stmmac_mode_ops chain_mode_ops = {
---- a/drivers/net/ethernet/stmicro/stmmac/common.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
-@@ -44,6 +44,7 @@
- #define DWMAC_CORE_4_00 0x40
- #define STMMAC_CHAN0 0 /* Always supported and default for all chips */
-
-+/* These need to be power of two, and >= 4 */
- #define DMA_TX_SIZE 512
- #define DMA_RX_SIZE 512
- #define STMMAC_GET_ENTRY(x, size) ((x + 1) & (size - 1))
-@@ -411,8 +412,8 @@ extern const struct stmmac_desc_ops ndes
- struct stmmac_dma_ops {
- /* DMA core initialization */
- int (*reset)(void __iomem *ioaddr);
-- void (*init)(void __iomem *ioaddr, int pbl, int fb, int mb,
-- int aal, u32 dma_tx, u32 dma_rx, int atds);
-+ void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_tx, u32 dma_rx, int atds);
- /* Configure the AXI Bus Mode Register */
- void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
- /* Dump DMA registers */
-@@ -506,6 +507,12 @@ struct mac_link {
- struct mii_regs {
- unsigned int addr; /* MII Address */
- unsigned int data; /* MII Data */
-+ unsigned int addr_shift; /* MII address shift */
-+ unsigned int reg_shift; /* MII reg shift */
-+ unsigned int addr_mask; /* MII address mask */
-+ unsigned int reg_mask; /* MII reg mask */
-+ unsigned int clk_csr_shift;
-+ unsigned int clk_csr_mask;
- };
-
- /* Helpers to manage the descriptors for chain and ring modes */
---- a/drivers/net/ethernet/stmicro/stmmac/descs.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/descs.h
-@@ -87,7 +87,7 @@
- #define TDES0_ERROR_SUMMARY BIT(15)
- #define TDES0_IP_HEADER_ERROR BIT(16)
- #define TDES0_TIME_STAMP_STATUS BIT(17)
--#define TDES0_OWN BIT(31)
-+#define TDES0_OWN ((u32)BIT(31)) /* silence sparse */
- /* TDES1 */
- #define TDES1_BUFFER1_SIZE_MASK GENMASK(10, 0)
- #define TDES1_BUFFER2_SIZE_MASK GENMASK(21, 11)
-@@ -130,7 +130,7 @@
- #define ETDES0_FIRST_SEGMENT BIT(28)
- #define ETDES0_LAST_SEGMENT BIT(29)
- #define ETDES0_INTERRUPT BIT(30)
--#define ETDES0_OWN BIT(31)
-+#define ETDES0_OWN ((u32)BIT(31)) /* silence sparse */
- /* TDES1 */
- #define ETDES1_BUFFER1_SIZE_MASK GENMASK(12, 0)
- #define ETDES1_BUFFER2_SIZE_MASK GENMASK(28, 16)
-@@ -170,19 +170,19 @@
-
- /* Basic descriptor structure for normal and alternate descriptors */
- struct dma_desc {
-- unsigned int des0;
-- unsigned int des1;
-- unsigned int des2;
-- unsigned int des3;
-+ __le32 des0;
-+ __le32 des1;
-+ __le32 des2;
-+ __le32 des3;
- };
-
- /* Extended descriptor structure (e.g. >= databook 3.50a) */
- struct dma_extended_desc {
- struct dma_desc basic; /* Basic descriptors */
-- unsigned int des4; /* Extended Status */
-- unsigned int des5; /* Reserved */
-- unsigned int des6; /* Tx/Rx Timestamp Low */
-- unsigned int des7; /* Tx/Rx Timestamp High */
-+ __le32 des4; /* Extended Status */
-+ __le32 des5; /* Reserved */
-+ __le32 des6; /* Tx/Rx Timestamp Low */
-+ __le32 des7; /* Tx/Rx Timestamp High */
- };
-
- /* Transmit checksum insertion control */
---- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
-@@ -35,47 +35,50 @@
- /* Enhanced descriptors */
- static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end)
- {
-- p->des1 |= ((BUF_SIZE_8KiB - 1) << ERDES1_BUFFER2_SIZE_SHIFT)
-- & ERDES1_BUFFER2_SIZE_MASK;
-+ p->des1 |= cpu_to_le32(((BUF_SIZE_8KiB - 1)
-+ << ERDES1_BUFFER2_SIZE_SHIFT)
-+ & ERDES1_BUFFER2_SIZE_MASK);
-
- if (end)
-- p->des1 |= ERDES1_END_RING;
-+ p->des1 |= cpu_to_le32(ERDES1_END_RING);
- }
-
- static inline void enh_desc_end_tx_desc_on_ring(struct dma_desc *p, int end)
- {
- if (end)
-- p->des0 |= ETDES0_END_RING;
-+ p->des0 |= cpu_to_le32(ETDES0_END_RING);
- else
-- p->des0 &= ~ETDES0_END_RING;
-+ p->des0 &= cpu_to_le32(~ETDES0_END_RING);
- }
-
- static inline void enh_set_tx_desc_len_on_ring(struct dma_desc *p, int len)
- {
- if (unlikely(len > BUF_SIZE_4KiB)) {
-- p->des1 |= (((len - BUF_SIZE_4KiB) << ETDES1_BUFFER2_SIZE_SHIFT)
-+ p->des1 |= cpu_to_le32((((len - BUF_SIZE_4KiB)
-+ << ETDES1_BUFFER2_SIZE_SHIFT)
- & ETDES1_BUFFER2_SIZE_MASK) | (BUF_SIZE_4KiB
-- & ETDES1_BUFFER1_SIZE_MASK);
-+ & ETDES1_BUFFER1_SIZE_MASK));
- } else
-- p->des1 |= (len & ETDES1_BUFFER1_SIZE_MASK);
-+ p->des1 |= cpu_to_le32((len & ETDES1_BUFFER1_SIZE_MASK));
- }
-
- /* Normal descriptors */
- static inline void ndesc_rx_set_on_ring(struct dma_desc *p, int end)
- {
-- p->des1 |= ((BUF_SIZE_2KiB - 1) << RDES1_BUFFER2_SIZE_SHIFT)
-- & RDES1_BUFFER2_SIZE_MASK;
-+ p->des1 |= cpu_to_le32(((BUF_SIZE_2KiB - 1)
-+ << RDES1_BUFFER2_SIZE_SHIFT)
-+ & RDES1_BUFFER2_SIZE_MASK);
-
- if (end)
-- p->des1 |= RDES1_END_RING;
-+ p->des1 |= cpu_to_le32(RDES1_END_RING);
- }
-
- static inline void ndesc_end_tx_desc_on_ring(struct dma_desc *p, int end)
- {
- if (end)
-- p->des1 |= TDES1_END_RING;
-+ p->des1 |= cpu_to_le32(TDES1_END_RING);
- else
-- p->des1 &= ~TDES1_END_RING;
-+ p->des1 &= cpu_to_le32(~TDES1_END_RING);
- }
-
- static inline void norm_set_tx_desc_len_on_ring(struct dma_desc *p, int len)
-@@ -83,10 +86,11 @@ static inline void norm_set_tx_desc_len_
- if (unlikely(len > BUF_SIZE_2KiB)) {
- unsigned int buffer1 = (BUF_SIZE_2KiB - 1)
- & TDES1_BUFFER1_SIZE_MASK;
-- p->des1 |= ((((len - buffer1) << TDES1_BUFFER2_SIZE_SHIFT)
-- & TDES1_BUFFER2_SIZE_MASK) | buffer1);
-+ p->des1 |= cpu_to_le32((((len - buffer1)
-+ << TDES1_BUFFER2_SIZE_SHIFT)
-+ & TDES1_BUFFER2_SIZE_MASK) | buffer1);
- } else
-- p->des1 |= (len & TDES1_BUFFER1_SIZE_MASK);
-+ p->des1 |= cpu_to_le32((len & TDES1_BUFFER1_SIZE_MASK));
- }
-
- /* Specific functions used for Chain mode */
-@@ -94,32 +98,32 @@ static inline void norm_set_tx_desc_len_
- /* Enhanced descriptors */
- static inline void ehn_desc_rx_set_on_chain(struct dma_desc *p)
- {
-- p->des1 |= ERDES1_SECOND_ADDRESS_CHAINED;
-+ p->des1 |= cpu_to_le32(ERDES1_SECOND_ADDRESS_CHAINED);
- }
-
- static inline void enh_desc_end_tx_desc_on_chain(struct dma_desc *p)
- {
-- p->des0 |= ETDES0_SECOND_ADDRESS_CHAINED;
-+ p->des0 |= cpu_to_le32(ETDES0_SECOND_ADDRESS_CHAINED);
- }
-
- static inline void enh_set_tx_desc_len_on_chain(struct dma_desc *p, int len)
- {
-- p->des1 |= (len & ETDES1_BUFFER1_SIZE_MASK);
-+ p->des1 |= cpu_to_le32(len & ETDES1_BUFFER1_SIZE_MASK);
- }
-
- /* Normal descriptors */
- static inline void ndesc_rx_set_on_chain(struct dma_desc *p, int end)
- {
-- p->des1 |= RDES1_SECOND_ADDRESS_CHAINED;
-+ p->des1 |= cpu_to_le32(RDES1_SECOND_ADDRESS_CHAINED);
- }
-
- static inline void ndesc_tx_set_on_chain(struct dma_desc *p)
- {
-- p->des1 |= TDES1_SECOND_ADDRESS_CHAINED;
-+ p->des1 |= cpu_to_le32(TDES1_SECOND_ADDRESS_CHAINED);
- }
-
- static inline void norm_set_tx_desc_len_on_chain(struct dma_desc *p, int len)
- {
-- p->des1 |= len & TDES1_BUFFER1_SIZE_MASK;
-+ p->des1 |= cpu_to_le32(len & TDES1_BUFFER1_SIZE_MASK);
- }
- #endif /* __DESC_COM_H__ */
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
-@@ -71,9 +71,12 @@ err_remove_config_dt:
-
- static const struct of_device_id dwmac_generic_match[] = {
- { .compatible = "st,spear600-gmac"},
-+ { .compatible = "snps,dwmac-3.50a"},
- { .compatible = "snps,dwmac-3.610"},
- { .compatible = "snps,dwmac-3.70a"},
- { .compatible = "snps,dwmac-3.710"},
-+ { .compatible = "snps,dwmac-4.00"},
-+ { .compatible = "snps,dwmac-4.10a"},
- { .compatible = "snps,dwmac"},
- { }
- };
---- /dev/null
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
-@@ -0,0 +1,194 @@
-+/*
-+ * Oxford Semiconductor OXNAS DWMAC glue layer
-+ *
-+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
-+ * Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org>
-+ * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/stmmac.h>
-+
-+#include "stmmac_platform.h"
-+
-+/* System Control regmap offsets */
-+#define OXNAS_DWMAC_CTRL_REGOFFSET 0x78
-+#define OXNAS_DWMAC_DELAY_REGOFFSET 0x100
-+
-+/* Control Register */
-+#define DWMAC_CKEN_RX_IN 14
-+#define DWMAC_CKEN_RXN_OUT 13
-+#define DWMAC_CKEN_RX_OUT 12
-+#define DWMAC_CKEN_TX_IN 10
-+#define DWMAC_CKEN_TXN_OUT 9
-+#define DWMAC_CKEN_TX_OUT 8
-+#define DWMAC_RX_SOURCE 7
-+#define DWMAC_TX_SOURCE 6
-+#define DWMAC_LOW_TX_SOURCE 4
-+#define DWMAC_AUTO_TX_SOURCE 3
-+#define DWMAC_RGMII 2
-+#define DWMAC_SIMPLE_MUX 1
-+#define DWMAC_CKEN_GTX 0
-+
-+/* Delay register */
-+#define DWMAC_TX_VARDELAY_SHIFT 0
-+#define DWMAC_TXN_VARDELAY_SHIFT 8
-+#define DWMAC_RX_VARDELAY_SHIFT 16
-+#define DWMAC_RXN_VARDELAY_SHIFT 24
-+#define DWMAC_TX_VARDELAY(d) ((d) << DWMAC_TX_VARDELAY_SHIFT)
-+#define DWMAC_TXN_VARDELAY(d) ((d) << DWMAC_TXN_VARDELAY_SHIFT)
-+#define DWMAC_RX_VARDELAY(d) ((d) << DWMAC_RX_VARDELAY_SHIFT)
-+#define DWMAC_RXN_VARDELAY(d) ((d) << DWMAC_RXN_VARDELAY_SHIFT)
-+
-+struct oxnas_dwmac {
-+ struct device *dev;
-+ struct clk *clk;
-+ struct regmap *regmap;
-+};
-+
-+static int oxnas_dwmac_init(struct platform_device *pdev, void *priv)
-+{
-+ struct oxnas_dwmac *dwmac = priv;
-+ unsigned int value;
-+ int ret;
-+
-+ /* Reset HW here before changing the glue configuration */
-+ ret = device_reset(dwmac->dev);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(dwmac->clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = regmap_read(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, &value);
-+ if (ret < 0) {
-+ clk_disable_unprepare(dwmac->clk);
-+ return ret;
-+ }
-+
-+ /* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */
-+ value |= BIT(DWMAC_CKEN_GTX) |
-+ /* Use simple mux for 25/125 Mhz clock switching */
-+ BIT(DWMAC_SIMPLE_MUX) |
-+ /* set auto switch tx clock source */
-+ BIT(DWMAC_AUTO_TX_SOURCE) |
-+ /* enable tx & rx vardelay */
-+ BIT(DWMAC_CKEN_TX_OUT) |
-+ BIT(DWMAC_CKEN_TXN_OUT) |
-+ BIT(DWMAC_CKEN_TX_IN) |
-+ BIT(DWMAC_CKEN_RX_OUT) |
-+ BIT(DWMAC_CKEN_RXN_OUT) |
-+ BIT(DWMAC_CKEN_RX_IN);
-+ regmap_write(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, value);
-+
-+ /* set tx & rx vardelay */
-+ value = DWMAC_TX_VARDELAY(4) |
-+ DWMAC_TXN_VARDELAY(2) |
-+ DWMAC_RX_VARDELAY(10) |
-+ DWMAC_RXN_VARDELAY(8);
-+ regmap_write(dwmac->regmap, OXNAS_DWMAC_DELAY_REGOFFSET, value);
-+
-+ return 0;
-+}
-+
-+static void oxnas_dwmac_exit(struct platform_device *pdev, void *priv)
-+{
-+ struct oxnas_dwmac *dwmac = priv;
-+
-+ clk_disable_unprepare(dwmac->clk);
-+}
-+
-+static int oxnas_dwmac_probe(struct platform_device *pdev)
-+{
-+ struct plat_stmmacenet_data *plat_dat;
-+ struct stmmac_resources stmmac_res;
-+ struct oxnas_dwmac *dwmac;
-+ int ret;
-+
-+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
-+ if (ret)
-+ return ret;
-+
-+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+ if (IS_ERR(plat_dat))
-+ return PTR_ERR(plat_dat);
-+
-+ dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
-+ if (!dwmac) {
-+ ret = -ENOMEM;
-+ goto err_remove_config_dt;
-+ }
-+
-+ dwmac->dev = &pdev->dev;
-+ plat_dat->bsp_priv = dwmac;
-+ plat_dat->init = oxnas_dwmac_init;
-+ plat_dat->exit = oxnas_dwmac_exit;
-+
-+ dwmac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+ "oxsemi,sys-ctrl");
-+ if (IS_ERR(dwmac->regmap)) {
-+ dev_err(&pdev->dev, "failed to have sysctrl regmap\n");
-+ ret = PTR_ERR(dwmac->regmap);
-+ goto err_remove_config_dt;
-+ }
-+
-+ dwmac->clk = devm_clk_get(&pdev->dev, "gmac");
-+ if (IS_ERR(dwmac->clk)) {
-+ ret = PTR_ERR(dwmac->clk);
-+ goto err_remove_config_dt;
-+ }
-+
-+ ret = oxnas_dwmac_init(pdev, plat_dat->bsp_priv);
-+ if (ret)
-+ goto err_remove_config_dt;
-+
-+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
-+ if (ret)
-+ goto err_dwmac_exit;
-+
-+
-+ return 0;
-+
-+err_dwmac_exit:
-+ oxnas_dwmac_exit(pdev, plat_dat->bsp_priv);
-+err_remove_config_dt:
-+ stmmac_remove_config_dt(pdev, plat_dat);
-+
-+ return ret;
-+}
-+
-+static const struct of_device_id oxnas_dwmac_match[] = {
-+ { .compatible = "oxsemi,ox820-dwmac" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, oxnas_dwmac_match);
-+
-+static struct platform_driver oxnas_dwmac_driver = {
-+ .probe = oxnas_dwmac_probe,
-+ .remove = stmmac_pltfr_remove,
-+ .driver = {
-+ .name = "oxnas-dwmac",
-+ .pm = &stmmac_pltfr_pm_ops,
-+ .of_match_table = oxnas_dwmac_match,
-+ },
-+};
-+module_platform_driver(oxnas_dwmac_driver);
-+
-+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-+MODULE_DESCRIPTION("Oxford Semiconductor OXNAS DWMAC glue layer");
-+MODULE_LICENSE("GPL v2");
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
-@@ -864,6 +864,10 @@ static int rk_gmac_powerup(struct rk_pri
- int ret;
- struct device *dev = &bsp_priv->pdev->dev;
-
-+ ret = gmac_clk_enable(bsp_priv, true);
-+ if (ret)
-+ return ret;
-+
- /*rmii or rgmii*/
- if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII) {
- dev_info(dev, "init for RGMII\n");
-@@ -880,10 +884,6 @@ static int rk_gmac_powerup(struct rk_pri
- if (ret)
- return ret;
-
-- ret = gmac_clk_enable(bsp_priv, true);
-- if (ret)
-- return ret;
--
- pm_runtime_enable(dev);
- pm_runtime_get_sync(dev);
-
-@@ -901,44 +901,6 @@ static void rk_gmac_powerdown(struct rk_
- gmac_clk_enable(gmac, false);
- }
-
--static int rk_gmac_init(struct platform_device *pdev, void *priv)
--{
-- struct rk_priv_data *bsp_priv = priv;
--
-- return rk_gmac_powerup(bsp_priv);
--}
--
--static void rk_gmac_exit(struct platform_device *pdev, void *priv)
--{
-- struct rk_priv_data *bsp_priv = priv;
--
-- rk_gmac_powerdown(bsp_priv);
--}
--
--static void rk_gmac_suspend(struct platform_device *pdev, void *priv)
--{
-- struct rk_priv_data *bsp_priv = priv;
--
-- /* Keep the PHY up if we use Wake-on-Lan. */
-- if (device_may_wakeup(&pdev->dev))
-- return;
--
-- rk_gmac_powerdown(bsp_priv);
-- bsp_priv->suspended = true;
--}
--
--static void rk_gmac_resume(struct platform_device *pdev, void *priv)
--{
-- struct rk_priv_data *bsp_priv = priv;
--
-- /* The PHY was up for Wake-on-Lan. */
-- if (!bsp_priv->suspended)
-- return;
--
-- rk_gmac_powerup(bsp_priv);
-- bsp_priv->suspended = false;
--}
--
- static void rk_fix_speed(void *priv, unsigned int speed)
- {
- struct rk_priv_data *bsp_priv = priv;
-@@ -974,11 +936,7 @@ static int rk_gmac_probe(struct platform
- return PTR_ERR(plat_dat);
-
- plat_dat->has_gmac = true;
-- plat_dat->init = rk_gmac_init;
-- plat_dat->exit = rk_gmac_exit;
- plat_dat->fix_mac_speed = rk_fix_speed;
-- plat_dat->suspend = rk_gmac_suspend;
-- plat_dat->resume = rk_gmac_resume;
-
- plat_dat->bsp_priv = rk_gmac_setup(pdev, data);
- if (IS_ERR(plat_dat->bsp_priv)) {
-@@ -986,24 +944,65 @@ static int rk_gmac_probe(struct platform
- goto err_remove_config_dt;
- }
-
-- ret = rk_gmac_init(pdev, plat_dat->bsp_priv);
-+ ret = rk_gmac_powerup(plat_dat->bsp_priv);
- if (ret)
- goto err_remove_config_dt;
-
- ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
- if (ret)
-- goto err_gmac_exit;
-+ goto err_gmac_powerdown;
-
- return 0;
-
--err_gmac_exit:
-- rk_gmac_exit(pdev, plat_dat->bsp_priv);
-+err_gmac_powerdown:
-+ rk_gmac_powerdown(plat_dat->bsp_priv);
- err_remove_config_dt:
- stmmac_remove_config_dt(pdev, plat_dat);
-
- return ret;
- }
-
-+static int rk_gmac_remove(struct platform_device *pdev)
-+{
-+ struct rk_priv_data *bsp_priv = get_stmmac_bsp_priv(&pdev->dev);
-+ int ret = stmmac_dvr_remove(&pdev->dev);
-+
-+ rk_gmac_powerdown(bsp_priv);
-+
-+ return ret;
-+}
-+
-+#ifdef CONFIG_PM_SLEEP
-+static int rk_gmac_suspend(struct device *dev)
-+{
-+ struct rk_priv_data *bsp_priv = get_stmmac_bsp_priv(dev);
-+ int ret = stmmac_suspend(dev);
-+
-+ /* Keep the PHY up if we use Wake-on-Lan. */
-+ if (!device_may_wakeup(dev)) {
-+ rk_gmac_powerdown(bsp_priv);
-+ bsp_priv->suspended = true;
-+ }
-+
-+ return ret;
-+}
-+
-+static int rk_gmac_resume(struct device *dev)
-+{
-+ struct rk_priv_data *bsp_priv = get_stmmac_bsp_priv(dev);
-+
-+ /* The PHY was up for Wake-on-Lan. */
-+ if (bsp_priv->suspended) {
-+ rk_gmac_powerup(bsp_priv);
-+ bsp_priv->suspended = false;
-+ }
-+
-+ return stmmac_resume(dev);
-+}
-+#endif /* CONFIG_PM_SLEEP */
-+
-+static SIMPLE_DEV_PM_OPS(rk_gmac_pm_ops, rk_gmac_suspend, rk_gmac_resume);
-+
- static const struct of_device_id rk_gmac_dwmac_match[] = {
- { .compatible = "rockchip,rk3228-gmac", .data = &rk3228_ops },
- { .compatible = "rockchip,rk3288-gmac", .data = &rk3288_ops },
-@@ -1016,10 +1015,10 @@ MODULE_DEVICE_TABLE(of, rk_gmac_dwmac_ma
-
- static struct platform_driver rk_gmac_dwmac_driver = {
- .probe = rk_gmac_probe,
-- .remove = stmmac_pltfr_remove,
-+ .remove = rk_gmac_remove,
- .driver = {
- .name = "rk_gmac-dwmac",
-- .pm = &stmmac_pltfr_pm_ops,
-+ .pm = &rk_gmac_pm_ops,
- .of_match_table = rk_gmac_dwmac_match,
- },
- };
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
-@@ -390,8 +390,8 @@ static int socfpga_dwmac_resume(struct d
- * control register 0, and can be modified by the phy driver
- * framework.
- */
-- if (priv->phydev)
-- phy_resume(priv->phydev);
-+ if (ndev->phydev)
-+ phy_resume(ndev->phydev);
-
- return stmmac_resume(dev);
- }
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
-@@ -126,8 +126,8 @@ struct sti_dwmac {
- struct clk *clk; /* PHY clock */
- u32 ctrl_reg; /* GMAC glue-logic control register */
- int clk_sel_reg; /* GMAC ext clk selection register */
-- struct device *dev;
- struct regmap *regmap;
-+ bool gmac_en;
- u32 speed;
- void (*fix_retime_src)(void *priv, unsigned int speed);
- };
-@@ -191,7 +191,7 @@ static void stih4xx_fix_retime_src(void
- }
- }
-
-- if (src == TX_RETIME_SRC_CLKGEN && dwmac->clk && freq)
-+ if (src == TX_RETIME_SRC_CLKGEN && freq)
- clk_set_rate(dwmac->clk, freq);
-
- regmap_update_bits(dwmac->regmap, reg, STIH4XX_RETIME_SRC_MASK,
-@@ -222,26 +222,20 @@ static void stid127_fix_retime_src(void
- freq = DWMAC_2_5MHZ;
- }
-
-- if (dwmac->clk && freq)
-+ if (freq)
- clk_set_rate(dwmac->clk, freq);
-
- regmap_update_bits(dwmac->regmap, reg, STID127_RETIME_SRC_MASK, val);
- }
-
--static int sti_dwmac_init(struct platform_device *pdev, void *priv)
-+static int sti_dwmac_set_mode(struct sti_dwmac *dwmac)
- {
-- struct sti_dwmac *dwmac = priv;
- struct regmap *regmap = dwmac->regmap;
- int iface = dwmac->interface;
-- struct device *dev = dwmac->dev;
-- struct device_node *np = dev->of_node;
- u32 reg = dwmac->ctrl_reg;
- u32 val;
-
-- if (dwmac->clk)
-- clk_prepare_enable(dwmac->clk);
--
-- if (of_property_read_bool(np, "st,gmac_en"))
-+ if (dwmac->gmac_en)
- regmap_update_bits(regmap, reg, EN_MASK, EN);
-
- regmap_update_bits(regmap, reg, MII_PHY_SEL_MASK, phy_intf_sels[iface]);
-@@ -249,18 +243,11 @@ static int sti_dwmac_init(struct platfor
- val = (iface == PHY_INTERFACE_MODE_REVMII) ? 0 : ENMII;
- regmap_update_bits(regmap, reg, ENMII_MASK, val);
-
-- dwmac->fix_retime_src(priv, dwmac->speed);
-+ dwmac->fix_retime_src(dwmac, dwmac->speed);
-
- return 0;
- }
-
--static void sti_dwmac_exit(struct platform_device *pdev, void *priv)
--{
-- struct sti_dwmac *dwmac = priv;
--
-- if (dwmac->clk)
-- clk_disable_unprepare(dwmac->clk);
--}
- static int sti_dwmac_parse_data(struct sti_dwmac *dwmac,
- struct platform_device *pdev)
- {
-@@ -270,9 +257,6 @@ static int sti_dwmac_parse_data(struct s
- struct regmap *regmap;
- int err;
-
-- if (!np)
-- return -EINVAL;
--
- /* clk selection from extra syscfg register */
- dwmac->clk_sel_reg = -ENXIO;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sti-clkconf");
-@@ -289,9 +273,9 @@ static int sti_dwmac_parse_data(struct s
- return err;
- }
-
-- dwmac->dev = dev;
- dwmac->interface = of_get_phy_mode(np);
- dwmac->regmap = regmap;
-+ dwmac->gmac_en = of_property_read_bool(np, "st,gmac_en");
- dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk");
- dwmac->tx_retime_src = TX_RETIME_SRC_NA;
- dwmac->speed = SPEED_100;
-@@ -359,28 +343,65 @@ static int sti_dwmac_probe(struct platfo
- dwmac->fix_retime_src = data->fix_retime_src;
-
- plat_dat->bsp_priv = dwmac;
-- plat_dat->init = sti_dwmac_init;
-- plat_dat->exit = sti_dwmac_exit;
- plat_dat->fix_mac_speed = data->fix_retime_src;
-
-- ret = sti_dwmac_init(pdev, plat_dat->bsp_priv);
-+ ret = clk_prepare_enable(dwmac->clk);
- if (ret)
- goto err_remove_config_dt;
-
-+ ret = sti_dwmac_set_mode(dwmac);
-+ if (ret)
-+ goto disable_clk;
-+
- ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
- if (ret)
-- goto err_dwmac_exit;
-+ goto disable_clk;
-
- return 0;
-
--err_dwmac_exit:
-- sti_dwmac_exit(pdev, plat_dat->bsp_priv);
-+disable_clk:
-+ clk_disable_unprepare(dwmac->clk);
- err_remove_config_dt:
- stmmac_remove_config_dt(pdev, plat_dat);
-
- return ret;
- }
-
-+static int sti_dwmac_remove(struct platform_device *pdev)
-+{
-+ struct sti_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);
-+ int ret = stmmac_dvr_remove(&pdev->dev);
-+
-+ clk_disable_unprepare(dwmac->clk);
-+
-+ return ret;
-+}
-+
-+#ifdef CONFIG_PM_SLEEP
-+static int sti_dwmac_suspend(struct device *dev)
-+{
-+ struct sti_dwmac *dwmac = get_stmmac_bsp_priv(dev);
-+ int ret = stmmac_suspend(dev);
-+
-+ clk_disable_unprepare(dwmac->clk);
-+
-+ return ret;
-+}
-+
-+static int sti_dwmac_resume(struct device *dev)
-+{
-+ struct sti_dwmac *dwmac = get_stmmac_bsp_priv(dev);
-+
-+ clk_prepare_enable(dwmac->clk);
-+ sti_dwmac_set_mode(dwmac);
-+
-+ return stmmac_resume(dev);
-+}
-+#endif /* CONFIG_PM_SLEEP */
-+
-+static SIMPLE_DEV_PM_OPS(sti_dwmac_pm_ops, sti_dwmac_suspend,
-+ sti_dwmac_resume);
-+
- static const struct sti_dwmac_of_data stih4xx_dwmac_data = {
- .fix_retime_src = stih4xx_fix_retime_src,
- };
-@@ -400,10 +421,10 @@ MODULE_DEVICE_TABLE(of, sti_dwmac_match)
-
- static struct platform_driver sti_dwmac_driver = {
- .probe = sti_dwmac_probe,
-- .remove = stmmac_pltfr_remove,
-+ .remove = sti_dwmac_remove,
- .driver = {
- .name = "sti-dwmac",
-- .pm = &stmmac_pltfr_pm_ops,
-+ .pm = &sti_dwmac_pm_ops,
- .of_match_table = sti_dwmac_match,
- },
- };
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
-@@ -225,7 +225,7 @@ enum rx_tx_priority_ratio {
-
- #define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */
- #define DMA_BUS_MODE_MB 0x04000000 /* Mixed burst */
--#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */
-+#define DMA_BUS_MODE_RPBL_MASK 0x007e0000 /* Rx-Programmable Burst Len */
- #define DMA_BUS_MODE_RPBL_SHIFT 17
- #define DMA_BUS_MODE_USP 0x00800000
- #define DMA_BUS_MODE_MAXPBL 0x01000000
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
-@@ -538,6 +538,12 @@ struct mac_device_info *dwmac1000_setup(
- mac->link.speed = GMAC_CONTROL_FES;
- mac->mii.addr = GMAC_MII_ADDR;
- mac->mii.data = GMAC_MII_DATA;
-+ mac->mii.addr_shift = 11;
-+ mac->mii.addr_mask = 0x0000F800;
-+ mac->mii.reg_shift = 6;
-+ mac->mii.reg_mask = 0x000007C0;
-+ mac->mii.clk_csr_shift = 2;
-+ mac->mii.clk_csr_mask = GENMASK(5, 2);
-
- /* Get and dump the chip ID */
- *synopsys_id = stmmac_get_synopsys_id(hwid);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
-@@ -84,37 +84,39 @@ static void dwmac1000_dma_axi(void __iom
- writel(value, ioaddr + DMA_AXI_BUS_MODE);
- }
-
--static void dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
-- int aal, u32 dma_tx, u32 dma_rx, int atds)
-+static void dwmac1000_dma_init(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_tx, u32 dma_rx, int atds)
- {
- u32 value = readl(ioaddr + DMA_BUS_MODE);
-+ int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
-+ int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
-
- /*
- * Set the DMA PBL (Programmable Burst Length) mode.
- *
- * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
- * post 3.5 mode bit acts as 8*PBL.
-- *
-- * This configuration doesn't take care about the Separate PBL
-- * so only the bits: 13-8 are programmed with the PBL passed from the
-- * platform.
- */
-- value |= DMA_BUS_MODE_MAXPBL;
-- value &= ~DMA_BUS_MODE_PBL_MASK;
-- value |= (pbl << DMA_BUS_MODE_PBL_SHIFT);
-+ if (dma_cfg->pblx8)
-+ value |= DMA_BUS_MODE_MAXPBL;
-+ value |= DMA_BUS_MODE_USP;
-+ value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
-+ value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
-+ value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
-
- /* Set the Fixed burst mode */
-- if (fb)
-+ if (dma_cfg->fixed_burst)
- value |= DMA_BUS_MODE_FB;
-
- /* Mixed Burst has no effect when fb is set */
-- if (mb)
-+ if (dma_cfg->mixed_burst)
- value |= DMA_BUS_MODE_MB;
-
- if (atds)
- value |= DMA_BUS_MODE_ATDS;
-
-- if (aal)
-+ if (dma_cfg->aal)
- value |= DMA_BUS_MODE_AAL;
-
- writel(value, ioaddr + DMA_BUS_MODE);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
-@@ -192,6 +192,13 @@ struct mac_device_info *dwmac100_setup(v
- mac->link.speed = 0;
- mac->mii.addr = MAC_MII_ADDR;
- mac->mii.data = MAC_MII_DATA;
-+ mac->mii.addr_shift = 11;
-+ mac->mii.addr_mask = 0x0000F800;
-+ mac->mii.reg_shift = 6;
-+ mac->mii.reg_mask = 0x000007C0;
-+ mac->mii.clk_csr_shift = 2;
-+ mac->mii.clk_csr_mask = GENMASK(5, 2);
-+
- /* Synopsys Id is not available on old chips */
- *synopsys_id = 0;
-
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
-@@ -32,11 +32,12 @@
- #include "dwmac100.h"
- #include "dwmac_dma.h"
-
--static void dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
-- int aal, u32 dma_tx, u32 dma_rx, int atds)
-+static void dwmac100_dma_init(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_tx, u32 dma_rx, int atds)
- {
- /* Enable Application Access by writing to DMA CSR0 */
-- writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT),
-+ writel(DMA_BUS_MODE_DEFAULT | (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT),
- ioaddr + DMA_BUS_MODE);
-
- /* Mask interrupts by writing to CSR7 */
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
-@@ -155,8 +155,11 @@ enum power_event {
- #define MTL_CHAN_RX_DEBUG(x) (MTL_CHANX_BASE_ADDR(x) + 0x38)
-
- #define MTL_OP_MODE_RSF BIT(5)
-+#define MTL_OP_MODE_TXQEN BIT(3)
- #define MTL_OP_MODE_TSF BIT(1)
-
-+#define MTL_OP_MODE_TQS_MASK GENMASK(24, 16)
-+
- #define MTL_OP_MODE_TTC_MASK 0x70
- #define MTL_OP_MODE_TTC_SHIFT 4
-
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
-@@ -430,6 +430,12 @@ struct mac_device_info *dwmac4_setup(voi
- mac->link.speed = GMAC_CONFIG_FES;
- mac->mii.addr = GMAC_MDIO_ADDR;
- mac->mii.data = GMAC_MDIO_DATA;
-+ mac->mii.addr_shift = 21;
-+ mac->mii.addr_mask = GENMASK(25, 21);
-+ mac->mii.reg_shift = 16;
-+ mac->mii.reg_mask = GENMASK(20, 16);
-+ mac->mii.clk_csr_shift = 8;
-+ mac->mii.clk_csr_mask = GENMASK(11, 8);
-
- /* Get and dump the chip ID */
- *synopsys_id = stmmac_get_synopsys_id(hwid);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
-@@ -23,7 +23,7 @@ static int dwmac4_wrback_get_tx_status(v
- unsigned int tdes3;
- int ret = tx_done;
-
-- tdes3 = p->des3;
-+ tdes3 = le32_to_cpu(p->des3);
-
- /* Get tx owner first */
- if (unlikely(tdes3 & TDES3_OWN))
-@@ -77,9 +77,9 @@ static int dwmac4_wrback_get_rx_status(v
- struct dma_desc *p)
- {
- struct net_device_stats *stats = (struct net_device_stats *)data;
-- unsigned int rdes1 = p->des1;
-- unsigned int rdes2 = p->des2;
-- unsigned int rdes3 = p->des3;
-+ unsigned int rdes1 = le32_to_cpu(p->des1);
-+ unsigned int rdes2 = le32_to_cpu(p->des2);
-+ unsigned int rdes3 = le32_to_cpu(p->des3);
- int message_type;
- int ret = good_frame;
-
-@@ -176,47 +176,48 @@ static int dwmac4_wrback_get_rx_status(v
-
- static int dwmac4_rd_get_tx_len(struct dma_desc *p)
- {
-- return (p->des2 & TDES2_BUFFER1_SIZE_MASK);
-+ return (le32_to_cpu(p->des2) & TDES2_BUFFER1_SIZE_MASK);
- }
-
- static int dwmac4_get_tx_owner(struct dma_desc *p)
- {
-- return (p->des3 & TDES3_OWN) >> TDES3_OWN_SHIFT;
-+ return (le32_to_cpu(p->des3) & TDES3_OWN) >> TDES3_OWN_SHIFT;
- }
-
- static void dwmac4_set_tx_owner(struct dma_desc *p)
- {
-- p->des3 |= TDES3_OWN;
-+ p->des3 |= cpu_to_le32(TDES3_OWN);
- }
-
- static void dwmac4_set_rx_owner(struct dma_desc *p)
- {
-- p->des3 |= RDES3_OWN;
-+ p->des3 |= cpu_to_le32(RDES3_OWN);
- }
-
- static int dwmac4_get_tx_ls(struct dma_desc *p)
- {
-- return (p->des3 & TDES3_LAST_DESCRIPTOR) >> TDES3_LAST_DESCRIPTOR_SHIFT;
-+ return (le32_to_cpu(p->des3) & TDES3_LAST_DESCRIPTOR)
-+ >> TDES3_LAST_DESCRIPTOR_SHIFT;
- }
-
- static int dwmac4_wrback_get_rx_frame_len(struct dma_desc *p, int rx_coe)
- {
-- return (p->des3 & RDES3_PACKET_SIZE_MASK);
-+ return (le32_to_cpu(p->des3) & RDES3_PACKET_SIZE_MASK);
- }
-
- static void dwmac4_rd_enable_tx_timestamp(struct dma_desc *p)
- {
-- p->des2 |= TDES2_TIMESTAMP_ENABLE;
-+ p->des2 |= cpu_to_le32(TDES2_TIMESTAMP_ENABLE);
- }
-
- static int dwmac4_wrback_get_tx_timestamp_status(struct dma_desc *p)
- {
- /* Context type from W/B descriptor must be zero */
-- if (p->des3 & TDES3_CONTEXT_TYPE)
-+ if (le32_to_cpu(p->des3) & TDES3_CONTEXT_TYPE)
- return -EINVAL;
-
- /* Tx Timestamp Status is 1 so des0 and des1'll have valid values */
-- if (p->des3 & TDES3_TIMESTAMP_STATUS)
-+ if (le32_to_cpu(p->des3) & TDES3_TIMESTAMP_STATUS)
- return 0;
-
- return 1;
-@@ -227,9 +228,9 @@ static inline u64 dwmac4_get_timestamp(v
- struct dma_desc *p = (struct dma_desc *)desc;
- u64 ns;
-
-- ns = p->des0;
-+ ns = le32_to_cpu(p->des0);
- /* convert high/sec time stamp value to nanosecond */
-- ns += p->des1 * 1000000000ULL;
-+ ns += le32_to_cpu(p->des1) * 1000000000ULL;
-
- return ns;
- }
-@@ -264,7 +265,7 @@ static int dwmac4_wrback_get_rx_timestam
-
- /* Get the status from normal w/b descriptor */
- if (likely(p->des3 & TDES3_RS1V)) {
-- if (likely(p->des1 & RDES1_TIMESTAMP_AVAILABLE)) {
-+ if (likely(le32_to_cpu(p->des1) & RDES1_TIMESTAMP_AVAILABLE)) {
- int i = 0;
-
- /* Check if timestamp is OK from context descriptor */
-@@ -287,10 +288,10 @@ exit:
- static void dwmac4_rd_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
- int mode, int end)
- {
-- p->des3 = RDES3_OWN | RDES3_BUFFER1_VALID_ADDR;
-+ p->des3 = cpu_to_le32(RDES3_OWN | RDES3_BUFFER1_VALID_ADDR);
-
- if (!disable_rx_ic)
-- p->des3 |= RDES3_INT_ON_COMPLETION_EN;
-+ p->des3 |= cpu_to_le32(RDES3_INT_ON_COMPLETION_EN);
- }
-
- static void dwmac4_rd_init_tx_desc(struct dma_desc *p, int mode, int end)
-@@ -305,9 +306,9 @@ static void dwmac4_rd_prepare_tx_desc(st
- bool csum_flag, int mode, bool tx_own,
- bool ls)
- {
-- unsigned int tdes3 = p->des3;
-+ unsigned int tdes3 = le32_to_cpu(p->des3);
-
-- p->des2 |= (len & TDES2_BUFFER1_SIZE_MASK);
-+ p->des2 |= cpu_to_le32(len & TDES2_BUFFER1_SIZE_MASK);
-
- if (is_fs)
- tdes3 |= TDES3_FIRST_DESCRIPTOR;
-@@ -333,9 +334,9 @@ static void dwmac4_rd_prepare_tx_desc(st
- * descriptors for the same frame has to be set before, to
- * avoid race condition.
- */
-- wmb();
-+ dma_wmb();
-
-- p->des3 = tdes3;
-+ p->des3 = cpu_to_le32(tdes3);
- }
-
- static void dwmac4_rd_prepare_tso_tx_desc(struct dma_desc *p, int is_fs,
-@@ -343,14 +344,14 @@ static void dwmac4_rd_prepare_tso_tx_des
- bool ls, unsigned int tcphdrlen,
- unsigned int tcppayloadlen)
- {
-- unsigned int tdes3 = p->des3;
-+ unsigned int tdes3 = le32_to_cpu(p->des3);
-
- if (len1)
-- p->des2 |= (len1 & TDES2_BUFFER1_SIZE_MASK);
-+ p->des2 |= cpu_to_le32((len1 & TDES2_BUFFER1_SIZE_MASK));
-
- if (len2)
-- p->des2 |= (len2 << TDES2_BUFFER2_SIZE_MASK_SHIFT)
-- & TDES2_BUFFER2_SIZE_MASK;
-+ p->des2 |= cpu_to_le32((len2 << TDES2_BUFFER2_SIZE_MASK_SHIFT)
-+ & TDES2_BUFFER2_SIZE_MASK);
-
- if (is_fs) {
- tdes3 |= TDES3_FIRST_DESCRIPTOR |
-@@ -376,9 +377,9 @@ static void dwmac4_rd_prepare_tso_tx_des
- * descriptors for the same frame has to be set before, to
- * avoid race condition.
- */
-- wmb();
-+ dma_wmb();
-
-- p->des3 = tdes3;
-+ p->des3 = cpu_to_le32(tdes3);
- }
-
- static void dwmac4_release_tx_desc(struct dma_desc *p, int mode)
-@@ -389,7 +390,7 @@ static void dwmac4_release_tx_desc(struc
-
- static void dwmac4_rd_set_tx_ic(struct dma_desc *p)
- {
-- p->des2 |= TDES2_INTERRUPT_ON_COMPLETION;
-+ p->des2 |= cpu_to_le32(TDES2_INTERRUPT_ON_COMPLETION);
- }
-
- static void dwmac4_display_ring(void *head, unsigned int size, bool rx)
-@@ -402,7 +403,8 @@ static void dwmac4_display_ring(void *he
- for (i = 0; i < size; i++) {
- pr_info("%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
- i, (unsigned int)virt_to_phys(p),
-- p->des0, p->des1, p->des2, p->des3);
-+ le32_to_cpu(p->des0), le32_to_cpu(p->des1),
-+ le32_to_cpu(p->des2), le32_to_cpu(p->des3));
- p++;
- }
- }
-@@ -411,8 +413,8 @@ static void dwmac4_set_mss_ctxt(struct d
- {
- p->des0 = 0;
- p->des1 = 0;
-- p->des2 = mss;
-- p->des3 = TDES3_CONTEXT_TYPE | TDES3_CTXT_TCMSSV;
-+ p->des2 = cpu_to_le32(mss);
-+ p->des3 = cpu_to_le32(TDES3_CONTEXT_TYPE | TDES3_CTXT_TCMSSV);
- }
-
- const struct stmmac_desc_ops dwmac4_desc_ops = {
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
-@@ -71,25 +71,29 @@ static void dwmac4_dma_axi(void __iomem
- writel(value, ioaddr + DMA_SYS_BUS_MODE);
- }
-
--static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl,
-+static void dwmac4_dma_init_channel(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
- u32 dma_tx_phy, u32 dma_rx_phy,
- u32 channel)
- {
- u32 value;
-+ int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
-+ int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
-
- /* set PBL for each channels. Currently we affect same configuration
- * on each channel
- */
- value = readl(ioaddr + DMA_CHAN_CONTROL(channel));
-- value = value | DMA_BUS_MODE_PBL;
-+ if (dma_cfg->pblx8)
-+ value = value | DMA_BUS_MODE_PBL;
- writel(value, ioaddr + DMA_CHAN_CONTROL(channel));
-
- value = readl(ioaddr + DMA_CHAN_TX_CONTROL(channel));
-- value = value | (pbl << DMA_BUS_MODE_PBL_SHIFT);
-+ value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT);
- writel(value, ioaddr + DMA_CHAN_TX_CONTROL(channel));
-
- value = readl(ioaddr + DMA_CHAN_RX_CONTROL(channel));
-- value = value | (pbl << DMA_BUS_MODE_RPBL_SHIFT);
-+ value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
- writel(value, ioaddr + DMA_CHAN_RX_CONTROL(channel));
-
- /* Mask interrupts by writing to CSR7 */
-@@ -99,27 +103,28 @@ static void dwmac4_dma_init_channel(void
- writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(channel));
- }
-
--static void dwmac4_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
-- int aal, u32 dma_tx, u32 dma_rx, int atds)
-+static void dwmac4_dma_init(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_tx, u32 dma_rx, int atds)
- {
- u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
- int i;
-
- /* Set the Fixed burst mode */
-- if (fb)
-+ if (dma_cfg->fixed_burst)
- value |= DMA_SYS_BUS_FB;
-
- /* Mixed Burst has no effect when fb is set */
-- if (mb)
-+ if (dma_cfg->mixed_burst)
- value |= DMA_SYS_BUS_MB;
-
-- if (aal)
-+ if (dma_cfg->aal)
- value |= DMA_SYS_BUS_AAL;
-
- writel(value, ioaddr + DMA_SYS_BUS_MODE);
-
- for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
-- dwmac4_dma_init_channel(ioaddr, pbl, dma_tx, dma_rx, i);
-+ dwmac4_dma_init_channel(ioaddr, dma_cfg, dma_tx, dma_rx, i);
- }
-
- static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel)
-@@ -215,7 +220,17 @@ static void dwmac4_dma_chan_op_mode(void
- else
- mtl_tx_op |= MTL_OP_MODE_TTC_512;
- }
--
-+ /* For an IP with DWC_EQOS_NUM_TXQ == 1, the fields TXQEN and TQS are RO
-+ * with reset values: TXQEN on, TQS == DWC_EQOS_TXFIFO_SIZE.
-+ * For an IP with DWC_EQOS_NUM_TXQ > 1, the fields TXQEN and TQS are R/W
-+ * with reset values: TXQEN off, TQS 256 bytes.
-+ *
-+ * Write the bits in both cases, since it will have no effect when RO.
-+ * For DWC_EQOS_NUM_TXQ > 1, the top bits in MTL_OP_MODE_TQS_MASK might
-+ * be RO, however, writing the whole TQS field will result in a value
-+ * equal to DWC_EQOS_TXFIFO_SIZE, just like for DWC_EQOS_NUM_TXQ == 1.
-+ */
-+ mtl_tx_op |= MTL_OP_MODE_TXQEN | MTL_OP_MODE_TQS_MASK;
- writel(mtl_tx_op, ioaddr + MTL_CHAN_TX_OP_MODE(channel));
-
- mtl_rx_op = readl(ioaddr + MTL_CHAN_RX_OP_MODE(channel));
---- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
-@@ -30,7 +30,7 @@ static int enh_desc_get_tx_status(void *
- struct dma_desc *p, void __iomem *ioaddr)
- {
- struct net_device_stats *stats = (struct net_device_stats *)data;
-- unsigned int tdes0 = p->des0;
-+ unsigned int tdes0 = le32_to_cpu(p->des0);
- int ret = tx_done;
-
- /* Get tx owner first */
-@@ -95,7 +95,7 @@ static int enh_desc_get_tx_status(void *
-
- static int enh_desc_get_tx_len(struct dma_desc *p)
- {
-- return (p->des1 & ETDES1_BUFFER1_SIZE_MASK);
-+ return (le32_to_cpu(p->des1) & ETDES1_BUFFER1_SIZE_MASK);
- }
-
- static int enh_desc_coe_rdes0(int ipc_err, int type, int payload_err)
-@@ -134,8 +134,8 @@ static int enh_desc_coe_rdes0(int ipc_er
- static void enh_desc_get_ext_status(void *data, struct stmmac_extra_stats *x,
- struct dma_extended_desc *p)
- {
-- unsigned int rdes0 = p->basic.des0;
-- unsigned int rdes4 = p->des4;
-+ unsigned int rdes0 = le32_to_cpu(p->basic.des0);
-+ unsigned int rdes4 = le32_to_cpu(p->des4);
-
- if (unlikely(rdes0 & ERDES0_RX_MAC_ADDR)) {
- int message_type = (rdes4 & ERDES4_MSG_TYPE_MASK) >> 8;
-@@ -199,7 +199,7 @@ static int enh_desc_get_rx_status(void *
- struct dma_desc *p)
- {
- struct net_device_stats *stats = (struct net_device_stats *)data;
-- unsigned int rdes0 = p->des0;
-+ unsigned int rdes0 = le32_to_cpu(p->des0);
- int ret = good_frame;
-
- if (unlikely(rdes0 & RDES0_OWN))
-@@ -265,8 +265,8 @@ static int enh_desc_get_rx_status(void *
- static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
- int mode, int end)
- {
-- p->des0 |= RDES0_OWN;
-- p->des1 |= ((BUF_SIZE_8KiB - 1) & ERDES1_BUFFER1_SIZE_MASK);
-+ p->des0 |= cpu_to_le32(RDES0_OWN);
-+ p->des1 |= cpu_to_le32((BUF_SIZE_8KiB - 1) & ERDES1_BUFFER1_SIZE_MASK);
-
- if (mode == STMMAC_CHAIN_MODE)
- ehn_desc_rx_set_on_chain(p);
-@@ -274,12 +274,12 @@ static void enh_desc_init_rx_desc(struct
- ehn_desc_rx_set_on_ring(p, end);
-
- if (disable_rx_ic)
-- p->des1 |= ERDES1_DISABLE_IC;
-+ p->des1 |= cpu_to_le32(ERDES1_DISABLE_IC);
- }
-
- static void enh_desc_init_tx_desc(struct dma_desc *p, int mode, int end)
- {
-- p->des0 &= ~ETDES0_OWN;
-+ p->des0 &= cpu_to_le32(~ETDES0_OWN);
- if (mode == STMMAC_CHAIN_MODE)
- enh_desc_end_tx_desc_on_chain(p);
- else
-@@ -288,27 +288,27 @@ static void enh_desc_init_tx_desc(struct
-
- static int enh_desc_get_tx_owner(struct dma_desc *p)
- {
-- return (p->des0 & ETDES0_OWN) >> 31;
-+ return (le32_to_cpu(p->des0) & ETDES0_OWN) >> 31;
- }
-
- static void enh_desc_set_tx_owner(struct dma_desc *p)
- {
-- p->des0 |= ETDES0_OWN;
-+ p->des0 |= cpu_to_le32(ETDES0_OWN);
- }
-
- static void enh_desc_set_rx_owner(struct dma_desc *p)
- {
-- p->des0 |= RDES0_OWN;
-+ p->des0 |= cpu_to_le32(RDES0_OWN);
- }
-
- static int enh_desc_get_tx_ls(struct dma_desc *p)
- {
-- return (p->des0 & ETDES0_LAST_SEGMENT) >> 29;
-+ return (le32_to_cpu(p->des0) & ETDES0_LAST_SEGMENT) >> 29;
- }
-
- static void enh_desc_release_tx_desc(struct dma_desc *p, int mode)
- {
-- int ter = (p->des0 & ETDES0_END_RING) >> 21;
-+ int ter = (le32_to_cpu(p->des0) & ETDES0_END_RING) >> 21;
-
- memset(p, 0, offsetof(struct dma_desc, des2));
- if (mode == STMMAC_CHAIN_MODE)
-@@ -321,7 +321,7 @@ static void enh_desc_prepare_tx_desc(str
- bool csum_flag, int mode, bool tx_own,
- bool ls)
- {
-- unsigned int tdes0 = p->des0;
-+ unsigned int tdes0 = le32_to_cpu(p->des0);
-
- if (mode == STMMAC_CHAIN_MODE)
- enh_set_tx_desc_len_on_chain(p, len);
-@@ -350,14 +350,14 @@ static void enh_desc_prepare_tx_desc(str
- * descriptors for the same frame has to be set before, to
- * avoid race condition.
- */
-- wmb();
-+ dma_wmb();
-
-- p->des0 = tdes0;
-+ p->des0 = cpu_to_le32(tdes0);
- }
-
- static void enh_desc_set_tx_ic(struct dma_desc *p)
- {
-- p->des0 |= ETDES0_INTERRUPT;
-+ p->des0 |= cpu_to_le32(ETDES0_INTERRUPT);
- }
-
- static int enh_desc_get_rx_frame_len(struct dma_desc *p, int rx_coe_type)
-@@ -372,18 +372,18 @@ static int enh_desc_get_rx_frame_len(str
- if (rx_coe_type == STMMAC_RX_COE_TYPE1)
- csum = 2;
-
-- return (((p->des0 & RDES0_FRAME_LEN_MASK) >> RDES0_FRAME_LEN_SHIFT) -
-- csum);
-+ return (((le32_to_cpu(p->des0) & RDES0_FRAME_LEN_MASK)
-+ >> RDES0_FRAME_LEN_SHIFT) - csum);
- }
-
- static void enh_desc_enable_tx_timestamp(struct dma_desc *p)
- {
-- p->des0 |= ETDES0_TIME_STAMP_ENABLE;
-+ p->des0 |= cpu_to_le32(ETDES0_TIME_STAMP_ENABLE);
- }
-
- static int enh_desc_get_tx_timestamp_status(struct dma_desc *p)
- {
-- return (p->des0 & ETDES0_TIME_STAMP_STATUS) >> 17;
-+ return (le32_to_cpu(p->des0) & ETDES0_TIME_STAMP_STATUS) >> 17;
- }
-
- static u64 enh_desc_get_timestamp(void *desc, u32 ats)
-@@ -392,13 +392,13 @@ static u64 enh_desc_get_timestamp(void *
-
- if (ats) {
- struct dma_extended_desc *p = (struct dma_extended_desc *)desc;
-- ns = p->des6;
-+ ns = le32_to_cpu(p->des6);
- /* convert high/sec time stamp value to nanosecond */
-- ns += p->des7 * 1000000000ULL;
-+ ns += le32_to_cpu(p->des7) * 1000000000ULL;
- } else {
- struct dma_desc *p = (struct dma_desc *)desc;
-- ns = p->des2;
-- ns += p->des3 * 1000000000ULL;
-+ ns = le32_to_cpu(p->des2);
-+ ns += le32_to_cpu(p->des3) * 1000000000ULL;
- }
-
- return ns;
-@@ -408,10 +408,11 @@ static int enh_desc_get_rx_timestamp_sta
- {
- if (ats) {
- struct dma_extended_desc *p = (struct dma_extended_desc *)desc;
-- return (p->basic.des0 & RDES0_IPC_CSUM_ERROR) >> 7;
-+ return (le32_to_cpu(p->basic.des0) & RDES0_IPC_CSUM_ERROR) >> 7;
- } else {
- struct dma_desc *p = (struct dma_desc *)desc;
-- if ((p->des2 == 0xffffffff) && (p->des3 == 0xffffffff))
-+ if ((le32_to_cpu(p->des2) == 0xffffffff) &&
-+ (le32_to_cpu(p->des3) == 0xffffffff))
- /* timestamp is corrupted, hence don't store it */
- return 0;
- else
---- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
-@@ -30,8 +30,8 @@ static int ndesc_get_tx_status(void *dat
- struct dma_desc *p, void __iomem *ioaddr)
- {
- struct net_device_stats *stats = (struct net_device_stats *)data;
-- unsigned int tdes0 = p->des0;
-- unsigned int tdes1 = p->des1;
-+ unsigned int tdes0 = le32_to_cpu(p->des0);
-+ unsigned int tdes1 = le32_to_cpu(p->des1);
- int ret = tx_done;
-
- /* Get tx owner first */
-@@ -77,7 +77,7 @@ static int ndesc_get_tx_status(void *dat
-
- static int ndesc_get_tx_len(struct dma_desc *p)
- {
-- return (p->des1 & RDES1_BUFFER1_SIZE_MASK);
-+ return (le32_to_cpu(p->des1) & RDES1_BUFFER1_SIZE_MASK);
- }
-
- /* This function verifies if each incoming frame has some errors
-@@ -88,7 +88,7 @@ static int ndesc_get_rx_status(void *dat
- struct dma_desc *p)
- {
- int ret = good_frame;
-- unsigned int rdes0 = p->des0;
-+ unsigned int rdes0 = le32_to_cpu(p->des0);
- struct net_device_stats *stats = (struct net_device_stats *)data;
-
- if (unlikely(rdes0 & RDES0_OWN))
-@@ -141,8 +141,8 @@ static int ndesc_get_rx_status(void *dat
- static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode,
- int end)
- {
-- p->des0 |= RDES0_OWN;
-- p->des1 |= (BUF_SIZE_2KiB - 1) & RDES1_BUFFER1_SIZE_MASK;
-+ p->des0 |= cpu_to_le32(RDES0_OWN);
-+ p->des1 |= cpu_to_le32((BUF_SIZE_2KiB - 1) & RDES1_BUFFER1_SIZE_MASK);
-
- if (mode == STMMAC_CHAIN_MODE)
- ndesc_rx_set_on_chain(p, end);
-@@ -150,12 +150,12 @@ static void ndesc_init_rx_desc(struct dm
- ndesc_rx_set_on_ring(p, end);
-
- if (disable_rx_ic)
-- p->des1 |= RDES1_DISABLE_IC;
-+ p->des1 |= cpu_to_le32(RDES1_DISABLE_IC);
- }
-
- static void ndesc_init_tx_desc(struct dma_desc *p, int mode, int end)
- {
-- p->des0 &= ~TDES0_OWN;
-+ p->des0 &= cpu_to_le32(~TDES0_OWN);
- if (mode == STMMAC_CHAIN_MODE)
- ndesc_tx_set_on_chain(p);
- else
-@@ -164,27 +164,27 @@ static void ndesc_init_tx_desc(struct dm
-
- static int ndesc_get_tx_owner(struct dma_desc *p)
- {
-- return (p->des0 & TDES0_OWN) >> 31;
-+ return (le32_to_cpu(p->des0) & TDES0_OWN) >> 31;
- }
-
- static void ndesc_set_tx_owner(struct dma_desc *p)
- {
-- p->des0 |= TDES0_OWN;
-+ p->des0 |= cpu_to_le32(TDES0_OWN);
- }
-
- static void ndesc_set_rx_owner(struct dma_desc *p)
- {
-- p->des0 |= RDES0_OWN;
-+ p->des0 |= cpu_to_le32(RDES0_OWN);
- }
-
- static int ndesc_get_tx_ls(struct dma_desc *p)
- {
-- return (p->des1 & TDES1_LAST_SEGMENT) >> 30;
-+ return (le32_to_cpu(p->des1) & TDES1_LAST_SEGMENT) >> 30;
- }
-
- static void ndesc_release_tx_desc(struct dma_desc *p, int mode)
- {
-- int ter = (p->des1 & TDES1_END_RING) >> 25;
-+ int ter = (le32_to_cpu(p->des1) & TDES1_END_RING) >> 25;
-
- memset(p, 0, offsetof(struct dma_desc, des2));
- if (mode == STMMAC_CHAIN_MODE)
-@@ -197,7 +197,7 @@ static void ndesc_prepare_tx_desc(struct
- bool csum_flag, int mode, bool tx_own,
- bool ls)
- {
-- unsigned int tdes1 = p->des1;
-+ unsigned int tdes1 = le32_to_cpu(p->des1);
-
- if (is_fs)
- tdes1 |= TDES1_FIRST_SEGMENT;
-@@ -212,7 +212,7 @@ static void ndesc_prepare_tx_desc(struct
- if (ls)
- tdes1 |= TDES1_LAST_SEGMENT;
-
-- p->des1 = tdes1;
-+ p->des1 = cpu_to_le32(tdes1);
-
- if (mode == STMMAC_CHAIN_MODE)
- norm_set_tx_desc_len_on_chain(p, len);
-@@ -220,12 +220,12 @@ static void ndesc_prepare_tx_desc(struct
- norm_set_tx_desc_len_on_ring(p, len);
-
- if (tx_own)
-- p->des0 |= TDES0_OWN;
-+ p->des0 |= cpu_to_le32(TDES0_OWN);
- }
-
- static void ndesc_set_tx_ic(struct dma_desc *p)
- {
-- p->des1 |= TDES1_INTERRUPT;
-+ p->des1 |= cpu_to_le32(TDES1_INTERRUPT);
- }
-
- static int ndesc_get_rx_frame_len(struct dma_desc *p, int rx_coe_type)
-@@ -241,19 +241,20 @@ static int ndesc_get_rx_frame_len(struct
- if (rx_coe_type == STMMAC_RX_COE_TYPE1)
- csum = 2;
-
-- return (((p->des0 & RDES0_FRAME_LEN_MASK) >> RDES0_FRAME_LEN_SHIFT) -
-+ return (((le32_to_cpu(p->des0) & RDES0_FRAME_LEN_MASK)
-+ >> RDES0_FRAME_LEN_SHIFT) -
- csum);
-
- }
-
- static void ndesc_enable_tx_timestamp(struct dma_desc *p)
- {
-- p->des1 |= TDES1_TIME_STAMP_ENABLE;
-+ p->des1 |= cpu_to_le32(TDES1_TIME_STAMP_ENABLE);
- }
-
- static int ndesc_get_tx_timestamp_status(struct dma_desc *p)
- {
-- return (p->des0 & TDES0_TIME_STAMP_STATUS) >> 17;
-+ return (le32_to_cpu(p->des0) & TDES0_TIME_STAMP_STATUS) >> 17;
- }
-
- static u64 ndesc_get_timestamp(void *desc, u32 ats)
-@@ -261,9 +262,9 @@ static u64 ndesc_get_timestamp(void *des
- struct dma_desc *p = (struct dma_desc *)desc;
- u64 ns;
-
-- ns = p->des2;
-+ ns = le32_to_cpu(p->des2);
- /* convert high/sec time stamp value to nanosecond */
-- ns += p->des3 * 1000000000ULL;
-+ ns += le32_to_cpu(p->des3) * 1000000000ULL;
-
- return ns;
- }
-@@ -272,7 +273,8 @@ static int ndesc_get_rx_timestamp_status
- {
- struct dma_desc *p = (struct dma_desc *)desc;
-
-- if ((p->des2 == 0xffffffff) && (p->des3 == 0xffffffff))
-+ if ((le32_to_cpu(p->des2) == 0xffffffff) &&
-+ (le32_to_cpu(p->des3) == 0xffffffff))
- /* timestamp is corrupted, hence don't store it */
- return 0;
- else
---- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
-@@ -34,7 +34,7 @@ static int stmmac_jumbo_frm(void *p, str
- unsigned int entry = priv->cur_tx;
- struct dma_desc *desc;
- unsigned int nopaged_len = skb_headlen(skb);
-- unsigned int bmax, len;
-+ unsigned int bmax, len, des2;
-
- if (priv->extend_desc)
- desc = (struct dma_desc *)(priv->dma_etx + entry);
-@@ -50,16 +50,17 @@ static int stmmac_jumbo_frm(void *p, str
-
- if (nopaged_len > BUF_SIZE_8KiB) {
-
-- desc->des2 = dma_map_single(priv->device, skb->data,
-- bmax, DMA_TO_DEVICE);
-- if (dma_mapping_error(priv->device, desc->des2))
-+ des2 = dma_map_single(priv->device, skb->data, bmax,
-+ DMA_TO_DEVICE);
-+ desc->des2 = cpu_to_le32(des2);
-+ if (dma_mapping_error(priv->device, des2))
- return -1;
-
-- priv->tx_skbuff_dma[entry].buf = desc->des2;
-+ priv->tx_skbuff_dma[entry].buf = des2;
- priv->tx_skbuff_dma[entry].len = bmax;
- priv->tx_skbuff_dma[entry].is_jumbo = true;
-
-- desc->des3 = desc->des2 + BUF_SIZE_4KiB;
-+ desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
- priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum,
- STMMAC_RING_MODE, 0, false);
- priv->tx_skbuff[entry] = NULL;
-@@ -70,26 +71,28 @@ static int stmmac_jumbo_frm(void *p, str
- else
- desc = priv->dma_tx + entry;
-
-- desc->des2 = dma_map_single(priv->device, skb->data + bmax,
-- len, DMA_TO_DEVICE);
-- if (dma_mapping_error(priv->device, desc->des2))
-+ des2 = dma_map_single(priv->device, skb->data + bmax, len,
-+ DMA_TO_DEVICE);
-+ desc->des2 = cpu_to_le32(des2);
-+ if (dma_mapping_error(priv->device, des2))
- return -1;
-- priv->tx_skbuff_dma[entry].buf = desc->des2;
-+ priv->tx_skbuff_dma[entry].buf = des2;
- priv->tx_skbuff_dma[entry].len = len;
- priv->tx_skbuff_dma[entry].is_jumbo = true;
-
-- desc->des3 = desc->des2 + BUF_SIZE_4KiB;
-+ desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
- priv->hw->desc->prepare_tx_desc(desc, 0, len, csum,
- STMMAC_RING_MODE, 1, true);
- } else {
-- desc->des2 = dma_map_single(priv->device, skb->data,
-- nopaged_len, DMA_TO_DEVICE);
-- if (dma_mapping_error(priv->device, desc->des2))
-+ des2 = dma_map_single(priv->device, skb->data,
-+ nopaged_len, DMA_TO_DEVICE);
-+ desc->des2 = cpu_to_le32(des2);
-+ if (dma_mapping_error(priv->device, des2))
- return -1;
-- priv->tx_skbuff_dma[entry].buf = desc->des2;
-+ priv->tx_skbuff_dma[entry].buf = des2;
- priv->tx_skbuff_dma[entry].len = nopaged_len;
- priv->tx_skbuff_dma[entry].is_jumbo = true;
-- desc->des3 = desc->des2 + BUF_SIZE_4KiB;
-+ desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
- priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len, csum,
- STMMAC_RING_MODE, 0, true);
- }
-@@ -115,13 +118,13 @@ static void stmmac_refill_desc3(void *pr
-
- /* Fill DES3 in case of RING mode */
- if (priv->dma_buf_sz >= BUF_SIZE_8KiB)
-- p->des3 = p->des2 + BUF_SIZE_8KiB;
-+ p->des3 = cpu_to_le32(le32_to_cpu(p->des2) + BUF_SIZE_8KiB);
- }
-
- /* In ring mode we need to fill the desc3 because it is used as buffer */
- static void stmmac_init_desc3(struct dma_desc *p)
- {
-- p->des3 = p->des2 + BUF_SIZE_8KiB;
-+ p->des3 = cpu_to_le32(le32_to_cpu(p->des2) + BUF_SIZE_8KiB);
- }
-
- static void stmmac_clean_desc3(void *priv_ptr, struct dma_desc *p)
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-@@ -64,7 +64,6 @@ struct stmmac_priv {
- dma_addr_t dma_tx_phy;
- int tx_coalesce;
- int hwts_tx_en;
-- spinlock_t tx_lock;
- bool tx_path_in_lpi_mode;
- struct timer_list txtimer;
- bool tso;
-@@ -90,7 +89,6 @@ struct stmmac_priv {
- struct mac_device_info *hw;
- spinlock_t lock;
-
-- struct phy_device *phydev ____cacheline_aligned_in_smp;
- int oldlink;
- int speed;
- int oldduplex;
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
-@@ -263,7 +263,7 @@ static void stmmac_ethtool_getdrvinfo(st
- {
- struct stmmac_priv *priv = netdev_priv(dev);
-
-- if (priv->plat->has_gmac)
-+ if (priv->plat->has_gmac || priv->plat->has_gmac4)
- strlcpy(info->driver, GMAC_ETHTOOL_NAME, sizeof(info->driver));
- else
- strlcpy(info->driver, MAC100_ETHTOOL_NAME,
-@@ -272,25 +272,26 @@ static void stmmac_ethtool_getdrvinfo(st
- strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version));
- }
-
--static int stmmac_ethtool_getsettings(struct net_device *dev,
-- struct ethtool_cmd *cmd)
-+static int stmmac_ethtool_get_link_ksettings(struct net_device *dev,
-+ struct ethtool_link_ksettings *cmd)
- {
- struct stmmac_priv *priv = netdev_priv(dev);
-- struct phy_device *phy = priv->phydev;
-+ struct phy_device *phy = dev->phydev;
- int rc;
-
- if (priv->hw->pcs & STMMAC_PCS_RGMII ||
- priv->hw->pcs & STMMAC_PCS_SGMII) {
- struct rgmii_adv adv;
-+ u32 supported, advertising, lp_advertising;
-
- if (!priv->xstats.pcs_link) {
-- ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
-- cmd->duplex = DUPLEX_UNKNOWN;
-+ cmd->base.speed = SPEED_UNKNOWN;
-+ cmd->base.duplex = DUPLEX_UNKNOWN;
- return 0;
- }
-- cmd->duplex = priv->xstats.pcs_duplex;
-+ cmd->base.duplex = priv->xstats.pcs_duplex;
-
-- ethtool_cmd_speed_set(cmd, priv->xstats.pcs_speed);
-+ cmd->base.speed = priv->xstats.pcs_speed;
-
- /* Get and convert ADV/LP_ADV from the HW AN registers */
- if (!priv->hw->mac->pcs_get_adv_lp)
-@@ -300,45 +301,59 @@ static int stmmac_ethtool_getsettings(st
-
- /* Encoding of PSE bits is defined in 802.3z, 37.2.1.4 */
-
-+ ethtool_convert_link_mode_to_legacy_u32(
-+ &supported, cmd->link_modes.supported);
-+ ethtool_convert_link_mode_to_legacy_u32(
-+ &advertising, cmd->link_modes.advertising);
-+ ethtool_convert_link_mode_to_legacy_u32(
-+ &lp_advertising, cmd->link_modes.lp_advertising);
-+
- if (adv.pause & STMMAC_PCS_PAUSE)
-- cmd->advertising |= ADVERTISED_Pause;
-+ advertising |= ADVERTISED_Pause;
- if (adv.pause & STMMAC_PCS_ASYM_PAUSE)
-- cmd->advertising |= ADVERTISED_Asym_Pause;
-+ advertising |= ADVERTISED_Asym_Pause;
- if (adv.lp_pause & STMMAC_PCS_PAUSE)
-- cmd->lp_advertising |= ADVERTISED_Pause;
-+ lp_advertising |= ADVERTISED_Pause;
- if (adv.lp_pause & STMMAC_PCS_ASYM_PAUSE)
-- cmd->lp_advertising |= ADVERTISED_Asym_Pause;
-+ lp_advertising |= ADVERTISED_Asym_Pause;
-
- /* Reg49[3] always set because ANE is always supported */
-- cmd->autoneg = ADVERTISED_Autoneg;
-- cmd->supported |= SUPPORTED_Autoneg;
-- cmd->advertising |= ADVERTISED_Autoneg;
-- cmd->lp_advertising |= ADVERTISED_Autoneg;
-+ cmd->base.autoneg = ADVERTISED_Autoneg;
-+ supported |= SUPPORTED_Autoneg;
-+ advertising |= ADVERTISED_Autoneg;
-+ lp_advertising |= ADVERTISED_Autoneg;
-
- if (adv.duplex) {
-- cmd->supported |= (SUPPORTED_1000baseT_Full |
-- SUPPORTED_100baseT_Full |
-- SUPPORTED_10baseT_Full);
-- cmd->advertising |= (ADVERTISED_1000baseT_Full |
-- ADVERTISED_100baseT_Full |
-- ADVERTISED_10baseT_Full);
-+ supported |= (SUPPORTED_1000baseT_Full |
-+ SUPPORTED_100baseT_Full |
-+ SUPPORTED_10baseT_Full);
-+ advertising |= (ADVERTISED_1000baseT_Full |
-+ ADVERTISED_100baseT_Full |
-+ ADVERTISED_10baseT_Full);
- } else {
-- cmd->supported |= (SUPPORTED_1000baseT_Half |
-- SUPPORTED_100baseT_Half |
-- SUPPORTED_10baseT_Half);
-- cmd->advertising |= (ADVERTISED_1000baseT_Half |
-- ADVERTISED_100baseT_Half |
-- ADVERTISED_10baseT_Half);
-+ supported |= (SUPPORTED_1000baseT_Half |
-+ SUPPORTED_100baseT_Half |
-+ SUPPORTED_10baseT_Half);
-+ advertising |= (ADVERTISED_1000baseT_Half |
-+ ADVERTISED_100baseT_Half |
-+ ADVERTISED_10baseT_Half);
- }
- if (adv.lp_duplex)
-- cmd->lp_advertising |= (ADVERTISED_1000baseT_Full |
-- ADVERTISED_100baseT_Full |
-- ADVERTISED_10baseT_Full);
-+ lp_advertising |= (ADVERTISED_1000baseT_Full |
-+ ADVERTISED_100baseT_Full |
-+ ADVERTISED_10baseT_Full);
- else
-- cmd->lp_advertising |= (ADVERTISED_1000baseT_Half |
-- ADVERTISED_100baseT_Half |
-- ADVERTISED_10baseT_Half);
-- cmd->port = PORT_OTHER;
-+ lp_advertising |= (ADVERTISED_1000baseT_Half |
-+ ADVERTISED_100baseT_Half |
-+ ADVERTISED_10baseT_Half);
-+ cmd->base.port = PORT_OTHER;
-+
-+ ethtool_convert_legacy_u32_to_link_mode(
-+ cmd->link_modes.supported, supported);
-+ ethtool_convert_legacy_u32_to_link_mode(
-+ cmd->link_modes.advertising, advertising);
-+ ethtool_convert_legacy_u32_to_link_mode(
-+ cmd->link_modes.lp_advertising, lp_advertising);
-
- return 0;
- }
-@@ -353,16 +368,16 @@ static int stmmac_ethtool_getsettings(st
- "link speed / duplex setting\n", dev->name);
- return -EBUSY;
- }
-- cmd->transceiver = XCVR_INTERNAL;
-- rc = phy_ethtool_gset(phy, cmd);
-+ rc = phy_ethtool_ksettings_get(phy, cmd);
- return rc;
- }
-
--static int stmmac_ethtool_setsettings(struct net_device *dev,
-- struct ethtool_cmd *cmd)
-+static int
-+stmmac_ethtool_set_link_ksettings(struct net_device *dev,
-+ const struct ethtool_link_ksettings *cmd)
- {
- struct stmmac_priv *priv = netdev_priv(dev);
-- struct phy_device *phy = priv->phydev;
-+ struct phy_device *phy = dev->phydev;
- int rc;
-
- if (priv->hw->pcs & STMMAC_PCS_RGMII ||
-@@ -370,7 +385,7 @@ static int stmmac_ethtool_setsettings(st
- u32 mask = ADVERTISED_Autoneg | ADVERTISED_Pause;
-
- /* Only support ANE */
-- if (cmd->autoneg != AUTONEG_ENABLE)
-+ if (cmd->base.autoneg != AUTONEG_ENABLE)
- return -EINVAL;
-
- mask &= (ADVERTISED_1000baseT_Half |
-@@ -391,9 +406,7 @@ static int stmmac_ethtool_setsettings(st
- return 0;
- }
-
-- spin_lock(&priv->lock);
-- rc = phy_ethtool_sset(phy, cmd);
-- spin_unlock(&priv->lock);
-+ rc = phy_ethtool_ksettings_set(phy, cmd);
-
- return rc;
- }
-@@ -433,7 +446,7 @@ static void stmmac_ethtool_gregs(struct
-
- memset(reg_space, 0x0, REG_SPACE_SIZE);
-
-- if (!priv->plat->has_gmac) {
-+ if (!(priv->plat->has_gmac || priv->plat->has_gmac4)) {
- /* MAC registers */
- for (i = 0; i < 12; i++)
- reg_space[i] = readl(priv->ioaddr + (i * 4));
-@@ -471,12 +484,12 @@ stmmac_get_pauseparam(struct net_device
- if (!adv_lp.pause)
- return;
- } else {
-- if (!(priv->phydev->supported & SUPPORTED_Pause) ||
-- !(priv->phydev->supported & SUPPORTED_Asym_Pause))
-+ if (!(netdev->phydev->supported & SUPPORTED_Pause) ||
-+ !(netdev->phydev->supported & SUPPORTED_Asym_Pause))
- return;
- }
-
-- pause->autoneg = priv->phydev->autoneg;
-+ pause->autoneg = netdev->phydev->autoneg;
-
- if (priv->flow_ctrl & FLOW_RX)
- pause->rx_pause = 1;
-@@ -490,7 +503,7 @@ stmmac_set_pauseparam(struct net_device
- struct ethtool_pauseparam *pause)
- {
- struct stmmac_priv *priv = netdev_priv(netdev);
-- struct phy_device *phy = priv->phydev;
-+ struct phy_device *phy = netdev->phydev;
- int new_pause = FLOW_OFF;
-
- if (priv->hw->pcs && priv->hw->mac->pcs_get_adv_lp) {
-@@ -550,7 +563,7 @@ static void stmmac_get_ethtool_stats(str
- }
- }
- if (priv->eee_enabled) {
-- int val = phy_get_eee_err(priv->phydev);
-+ int val = phy_get_eee_err(dev->phydev);
- if (val)
- priv->xstats.phy_eee_wakeup_error_n = val;
- }
-@@ -669,7 +682,7 @@ static int stmmac_ethtool_op_get_eee(str
- edata->eee_active = priv->eee_active;
- edata->tx_lpi_timer = priv->tx_lpi_timer;
-
-- return phy_ethtool_get_eee(priv->phydev, edata);
-+ return phy_ethtool_get_eee(dev->phydev, edata);
- }
-
- static int stmmac_ethtool_op_set_eee(struct net_device *dev,
-@@ -694,7 +707,7 @@ static int stmmac_ethtool_op_set_eee(str
- priv->tx_lpi_timer = edata->tx_lpi_timer;
- }
-
-- return phy_ethtool_set_eee(priv->phydev, edata);
-+ return phy_ethtool_set_eee(dev->phydev, edata);
- }
-
- static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv)
-@@ -853,8 +866,6 @@ static int stmmac_set_tunable(struct net
- static const struct ethtool_ops stmmac_ethtool_ops = {
- .begin = stmmac_check_if_running,
- .get_drvinfo = stmmac_ethtool_getdrvinfo,
-- .get_settings = stmmac_ethtool_getsettings,
-- .set_settings = stmmac_ethtool_setsettings,
- .get_msglevel = stmmac_ethtool_getmsglevel,
- .set_msglevel = stmmac_ethtool_setmsglevel,
- .get_regs = stmmac_ethtool_gregs,
-@@ -874,6 +885,8 @@ static const struct ethtool_ops stmmac_e
- .set_coalesce = stmmac_set_coalesce,
- .get_tunable = stmmac_get_tunable,
- .set_tunable = stmmac_set_tunable,
-+ .get_link_ksettings = stmmac_ethtool_get_link_ksettings,
-+ .set_link_ksettings = stmmac_ethtool_set_link_ksettings,
- };
-
- void stmmac_set_ethtool_ops(struct net_device *netdev)
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -105,8 +105,8 @@ module_param(eee_timer, int, S_IRUGO | S
- MODULE_PARM_DESC(eee_timer, "LPI tx expiration time in msec");
- #define STMMAC_LPI_T(x) (jiffies + msecs_to_jiffies(x))
-
--/* By default the driver will use the ring mode to manage tx and rx descriptors
-- * but passing this value so user can force to use the chain instead of the ring
-+/* By default the driver will use the ring mode to manage tx and rx descriptors,
-+ * but allow user to force to use the chain instead of the ring
- */
- static unsigned int chain_mode;
- module_param(chain_mode, int, S_IRUGO);
-@@ -221,7 +221,8 @@ static inline u32 stmmac_rx_dirty(struct
- */
- static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
- {
-- struct phy_device *phydev = priv->phydev;
-+ struct net_device *ndev = priv->dev;
-+ struct phy_device *phydev = ndev->phydev;
-
- if (likely(priv->plat->fix_mac_speed))
- priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
-@@ -279,6 +280,7 @@ static void stmmac_eee_ctrl_timer(unsign
- */
- bool stmmac_eee_init(struct stmmac_priv *priv)
- {
-+ struct net_device *ndev = priv->dev;
- unsigned long flags;
- int interface = priv->plat->interface;
- bool ret = false;
-@@ -301,7 +303,7 @@ bool stmmac_eee_init(struct stmmac_priv
- int tx_lpi_timer = priv->tx_lpi_timer;
-
- /* Check if the PHY supports EEE */
-- if (phy_init_eee(priv->phydev, 1)) {
-+ if (phy_init_eee(ndev->phydev, 1)) {
- /* To manage at run-time if the EEE cannot be supported
- * anymore (for example because the lp caps have been
- * changed).
-@@ -309,7 +311,7 @@ bool stmmac_eee_init(struct stmmac_priv
- */
- spin_lock_irqsave(&priv->lock, flags);
- if (priv->eee_active) {
-- pr_debug("stmmac: disable EEE\n");
-+ netdev_dbg(priv->dev, "disable EEE\n");
- del_timer_sync(&priv->eee_ctrl_timer);
- priv->hw->mac->set_eee_timer(priv->hw, 0,
- tx_lpi_timer);
-@@ -333,12 +335,12 @@ bool stmmac_eee_init(struct stmmac_priv
- tx_lpi_timer);
- }
- /* Set HW EEE according to the speed */
-- priv->hw->mac->set_eee_pls(priv->hw, priv->phydev->link);
-+ priv->hw->mac->set_eee_pls(priv->hw, ndev->phydev->link);
-
- ret = true;
- spin_unlock_irqrestore(&priv->lock, flags);
-
-- pr_debug("stmmac: Energy-Efficient Ethernet initialized\n");
-+ netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n");
- }
- out:
- return ret;
-@@ -456,8 +458,8 @@ static int stmmac_hwtstamp_ioctl(struct
- sizeof(struct hwtstamp_config)))
- return -EFAULT;
-
-- pr_debug("%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
-- __func__, config.flags, config.tx_type, config.rx_filter);
-+ netdev_dbg(priv->dev, "%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
-+ __func__, config.flags, config.tx_type, config.rx_filter);
-
- /* reserved for future extensions */
- if (config.flags)
-@@ -712,7 +714,7 @@ static void stmmac_release_ptp(struct st
- static void stmmac_adjust_link(struct net_device *dev)
- {
- struct stmmac_priv *priv = netdev_priv(dev);
-- struct phy_device *phydev = priv->phydev;
-+ struct phy_device *phydev = dev->phydev;
- unsigned long flags;
- int new_state = 0;
- unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
-@@ -765,9 +767,9 @@ static void stmmac_adjust_link(struct ne
- stmmac_hw_fix_mac_speed(priv);
- break;
- default:
-- if (netif_msg_link(priv))
-- pr_warn("%s: Speed (%d) not 10/100\n",
-- dev->name, phydev->speed);
-+ netif_warn(priv, link, priv->dev,
-+ "Speed (%d) not 10/100\n",
-+ phydev->speed);
- break;
- }
-
-@@ -820,10 +822,10 @@ static void stmmac_check_pcs_mode(struct
- (interface == PHY_INTERFACE_MODE_RGMII_ID) ||
- (interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
- (interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
-- pr_debug("STMMAC: PCS RGMII support enable\n");
-+ netdev_dbg(priv->dev, "PCS RGMII support enabled\n");
- priv->hw->pcs = STMMAC_PCS_RGMII;
- } else if (interface == PHY_INTERFACE_MODE_SGMII) {
-- pr_debug("STMMAC: PCS SGMII support enable\n");
-+ netdev_dbg(priv->dev, "PCS SGMII support enabled\n");
- priv->hw->pcs = STMMAC_PCS_SGMII;
- }
- }
-@@ -858,15 +860,15 @@ static int stmmac_init_phy(struct net_de
-
- snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
- priv->plat->phy_addr);
-- pr_debug("stmmac_init_phy: trying to attach to %s\n",
-- phy_id_fmt);
-+ netdev_dbg(priv->dev, "%s: trying to attach to %s\n", __func__,
-+ phy_id_fmt);
-
- phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
- interface);
- }
-
- if (IS_ERR_OR_NULL(phydev)) {
-- pr_err("%s: Could not attach to PHY\n", dev->name);
-+ netdev_err(priv->dev, "Could not attach to PHY\n");
- if (!phydev)
- return -ENODEV;
-
-@@ -899,10 +901,8 @@ static int stmmac_init_phy(struct net_de
- if (phydev->is_pseudo_fixed_link)
- phydev->irq = PHY_POLL;
-
-- pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)"
-- " Link = %d\n", dev->name, phydev->phy_id, phydev->link);
--
-- priv->phydev = phydev;
-+ netdev_dbg(priv->dev, "%s: attached to PHY (UID 0x%x) Link = %d\n",
-+ __func__, phydev->phy_id, phydev->link);
-
- return 0;
- }
-@@ -988,7 +988,8 @@ static int stmmac_init_rx_buffers(struct
-
- skb = __netdev_alloc_skb_ip_align(priv->dev, priv->dma_buf_sz, flags);
- if (!skb) {
-- pr_err("%s: Rx init fails; skb is NULL\n", __func__);
-+ netdev_err(priv->dev,
-+ "%s: Rx init fails; skb is NULL\n", __func__);
- return -ENOMEM;
- }
- priv->rx_skbuff[i] = skb;
-@@ -996,15 +997,15 @@ static int stmmac_init_rx_buffers(struct
- priv->dma_buf_sz,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(priv->device, priv->rx_skbuff_dma[i])) {
-- pr_err("%s: DMA mapping error\n", __func__);
-+ netdev_err(priv->dev, "%s: DMA mapping error\n", __func__);
- dev_kfree_skb_any(skb);
- return -EINVAL;
- }
-
- if (priv->synopsys_id >= DWMAC_CORE_4_00)
-- p->des0 = priv->rx_skbuff_dma[i];
-+ p->des0 = cpu_to_le32(priv->rx_skbuff_dma[i]);
- else
-- p->des2 = priv->rx_skbuff_dma[i];
-+ p->des2 = cpu_to_le32(priv->rx_skbuff_dma[i]);
-
- if ((priv->hw->mode->init_desc3) &&
- (priv->dma_buf_sz == BUF_SIZE_16KiB))
-@@ -1046,13 +1047,14 @@ static int init_dma_desc_rings(struct ne
-
- priv->dma_buf_sz = bfsize;
-
-- if (netif_msg_probe(priv)) {
-- pr_debug("(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n", __func__,
-- (u32) priv->dma_rx_phy, (u32) priv->dma_tx_phy);
-+ netif_dbg(priv, probe, priv->dev,
-+ "(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n",
-+ __func__, (u32)priv->dma_rx_phy, (u32)priv->dma_tx_phy);
-+
-+ /* RX INITIALIZATION */
-+ netif_dbg(priv, probe, priv->dev,
-+ "SKB addresses:\nskb\t\tskb data\tdma data\n");
-
-- /* RX INITIALIZATION */
-- pr_debug("\tSKB addresses:\nskb\t\tskb data\tdma data\n");
-- }
- for (i = 0; i < DMA_RX_SIZE; i++) {
- struct dma_desc *p;
- if (priv->extend_desc)
-@@ -1064,10 +1066,9 @@ static int init_dma_desc_rings(struct ne
- if (ret)
- goto err_init_rx_buffers;
-
-- if (netif_msg_probe(priv))
-- pr_debug("[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i],
-- priv->rx_skbuff[i]->data,
-- (unsigned int)priv->rx_skbuff_dma[i]);
-+ netif_dbg(priv, probe, priv->dev, "[%p]\t[%p]\t[%x]\n",
-+ priv->rx_skbuff[i], priv->rx_skbuff[i]->data,
-+ (unsigned int)priv->rx_skbuff_dma[i]);
- }
- priv->cur_rx = 0;
- priv->dirty_rx = (unsigned int)(i - DMA_RX_SIZE);
-@@ -1322,7 +1323,7 @@ static void stmmac_tx_clean(struct stmma
- unsigned int bytes_compl = 0, pkts_compl = 0;
- unsigned int entry = priv->dirty_tx;
-
-- spin_lock(&priv->tx_lock);
-+ netif_tx_lock(priv->dev);
-
- priv->xstats.tx_clean++;
-
-@@ -1398,22 +1399,17 @@ static void stmmac_tx_clean(struct stmma
- netdev_completed_queue(priv->dev, pkts_compl, bytes_compl);
-
- if (unlikely(netif_queue_stopped(priv->dev) &&
-- stmmac_tx_avail(priv) > STMMAC_TX_THRESH)) {
-- netif_tx_lock(priv->dev);
-- if (netif_queue_stopped(priv->dev) &&
-- stmmac_tx_avail(priv) > STMMAC_TX_THRESH) {
-- if (netif_msg_tx_done(priv))
-- pr_debug("%s: restart transmit\n", __func__);
-- netif_wake_queue(priv->dev);
-- }
-- netif_tx_unlock(priv->dev);
-+ stmmac_tx_avail(priv) > STMMAC_TX_THRESH)) {
-+ netif_dbg(priv, tx_done, priv->dev,
-+ "%s: restart transmit\n", __func__);
-+ netif_wake_queue(priv->dev);
- }
-
- if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) {
- stmmac_enable_eee_mode(priv);
- mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer));
- }
-- spin_unlock(&priv->tx_lock);
-+ netif_tx_unlock(priv->dev);
- }
-
- static inline void stmmac_enable_dma_irq(struct stmmac_priv *priv)
-@@ -1517,7 +1513,7 @@ static void stmmac_mmc_setup(struct stmm
- dwmac_mmc_ctrl(priv->mmcaddr, mode);
- memset(&priv->mmc, 0, sizeof(struct stmmac_counters));
- } else
-- pr_info(" No MAC Management Counters available\n");
-+ netdev_info(priv->dev, "No MAC Management Counters available\n");
- }
-
- /**
-@@ -1530,18 +1526,18 @@ static void stmmac_mmc_setup(struct stmm
- static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
- {
- if (priv->plat->enh_desc) {
-- pr_info(" Enhanced/Alternate descriptors\n");
-+ dev_info(priv->device, "Enhanced/Alternate descriptors\n");
-
- /* GMAC older than 3.50 has no extended descriptors */
- if (priv->synopsys_id >= DWMAC_CORE_3_50) {
-- pr_info("\tEnabled extended descriptors\n");
-+ dev_info(priv->device, "Enabled extended descriptors\n");
- priv->extend_desc = 1;
- } else
-- pr_warn("Extended descriptors not supported\n");
-+ dev_warn(priv->device, "Extended descriptors not supported\n");
-
- priv->hw->desc = &enh_desc_ops;
- } else {
-- pr_info(" Normal descriptors\n");
-+ dev_info(priv->device, "Normal descriptors\n");
- priv->hw->desc = &ndesc_ops;
- }
- }
-@@ -1582,8 +1578,8 @@ static void stmmac_check_ether_addr(stru
- priv->dev->dev_addr, 0);
- if (!is_valid_ether_addr(priv->dev->dev_addr))
- eth_hw_addr_random(priv->dev);
-- pr_info("%s: device MAC address %pM\n", priv->dev->name,
-- priv->dev->dev_addr);
-+ netdev_info(priv->dev, "device MAC address %pM\n",
-+ priv->dev->dev_addr);
- }
- }
-
-@@ -1597,16 +1593,12 @@ static void stmmac_check_ether_addr(stru
- */
- static int stmmac_init_dma_engine(struct stmmac_priv *priv)
- {
-- int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, aal = 0;
-- int mixed_burst = 0;
- int atds = 0;
- int ret = 0;
-
-- if (priv->plat->dma_cfg) {
-- pbl = priv->plat->dma_cfg->pbl;
-- fixed_burst = priv->plat->dma_cfg->fixed_burst;
-- mixed_burst = priv->plat->dma_cfg->mixed_burst;
-- aal = priv->plat->dma_cfg->aal;
-+ if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) {
-+ dev_err(priv->device, "Invalid DMA configuration\n");
-+ return -EINVAL;
- }
-
- if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE))
-@@ -1618,8 +1610,8 @@ static int stmmac_init_dma_engine(struct
- return ret;
- }
-
-- priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
-- aal, priv->dma_tx_phy, priv->dma_rx_phy, atds);
-+ priv->hw->dma->init(priv->ioaddr, priv->plat->dma_cfg,
-+ priv->dma_tx_phy, priv->dma_rx_phy, atds);
-
- if (priv->synopsys_id >= DWMAC_CORE_4_00) {
- priv->rx_tail_addr = priv->dma_rx_phy +
-@@ -1691,7 +1683,8 @@ static int stmmac_hw_setup(struct net_de
- /* DMA initialization and SW reset */
- ret = stmmac_init_dma_engine(priv);
- if (ret < 0) {
-- pr_err("%s: DMA engine initialization failed\n", __func__);
-+ netdev_err(priv->dev, "%s: DMA engine initialization failed\n",
-+ __func__);
- return ret;
- }
-
-@@ -1720,7 +1713,7 @@ static int stmmac_hw_setup(struct net_de
-
- ret = priv->hw->mac->rx_ipc(priv->hw);
- if (!ret) {
-- pr_warn(" RX IPC Checksum Offload disabled\n");
-+ netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
- priv->plat->rx_coe = STMMAC_RX_COE_NONE;
- priv->hw->rx_csum = 0;
- }
-@@ -1745,10 +1738,11 @@ static int stmmac_hw_setup(struct net_de
- #ifdef CONFIG_DEBUG_FS
- ret = stmmac_init_fs(dev);
- if (ret < 0)
-- pr_warn("%s: failed debugFS registration\n", __func__);
-+ netdev_warn(priv->dev, "%s: failed debugFS registration\n",
-+ __func__);
- #endif
- /* Start the ball rolling... */
-- pr_debug("%s: DMA RX/TX processes started...\n", dev->name);
-+ netdev_dbg(priv->dev, "DMA RX/TX processes started...\n");
- priv->hw->dma->start_tx(priv->ioaddr);
- priv->hw->dma->start_rx(priv->ioaddr);
-
-@@ -1803,8 +1797,9 @@ static int stmmac_open(struct net_device
- priv->hw->pcs != STMMAC_PCS_RTBI) {
- ret = stmmac_init_phy(dev);
- if (ret) {
-- pr_err("%s: Cannot attach to PHY (error: %d)\n",
-- __func__, ret);
-+ netdev_err(priv->dev,
-+ "%s: Cannot attach to PHY (error: %d)\n",
-+ __func__, ret);
- return ret;
- }
- }
-@@ -1819,33 +1814,36 @@ static int stmmac_open(struct net_device
-
- ret = alloc_dma_desc_resources(priv);
- if (ret < 0) {
-- pr_err("%s: DMA descriptors allocation failed\n", __func__);
-+ netdev_err(priv->dev, "%s: DMA descriptors allocation failed\n",
-+ __func__);
- goto dma_desc_error;
- }
-
- ret = init_dma_desc_rings(dev, GFP_KERNEL);
- if (ret < 0) {
-- pr_err("%s: DMA descriptors initialization failed\n", __func__);
-+ netdev_err(priv->dev, "%s: DMA descriptors initialization failed\n",
-+ __func__);
- goto init_error;
- }
-
- ret = stmmac_hw_setup(dev, true);
- if (ret < 0) {
-- pr_err("%s: Hw setup failed\n", __func__);
-+ netdev_err(priv->dev, "%s: Hw setup failed\n", __func__);
- goto init_error;
- }
-
- stmmac_init_tx_coalesce(priv);
-
-- if (priv->phydev)
-- phy_start(priv->phydev);
-+ if (dev->phydev)
-+ phy_start(dev->phydev);
-
- /* Request the IRQ lines */
- ret = request_irq(dev->irq, stmmac_interrupt,
- IRQF_SHARED, dev->name, dev);
- if (unlikely(ret < 0)) {
-- pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
-- __func__, dev->irq, ret);
-+ netdev_err(priv->dev,
-+ "%s: ERROR: allocating the IRQ %d (error: %d)\n",
-+ __func__, dev->irq, ret);
- goto init_error;
- }
-
-@@ -1854,8 +1852,9 @@ static int stmmac_open(struct net_device
- ret = request_irq(priv->wol_irq, stmmac_interrupt,
- IRQF_SHARED, dev->name, dev);
- if (unlikely(ret < 0)) {
-- pr_err("%s: ERROR: allocating the WoL IRQ %d (%d)\n",
-- __func__, priv->wol_irq, ret);
-+ netdev_err(priv->dev,
-+ "%s: ERROR: allocating the WoL IRQ %d (%d)\n",
-+ __func__, priv->wol_irq, ret);
- goto wolirq_error;
- }
- }
-@@ -1865,8 +1864,9 @@ static int stmmac_open(struct net_device
- ret = request_irq(priv->lpi_irq, stmmac_interrupt, IRQF_SHARED,
- dev->name, dev);
- if (unlikely(ret < 0)) {
-- pr_err("%s: ERROR: allocating the LPI IRQ %d (%d)\n",
-- __func__, priv->lpi_irq, ret);
-+ netdev_err(priv->dev,
-+ "%s: ERROR: allocating the LPI IRQ %d (%d)\n",
-+ __func__, priv->lpi_irq, ret);
- goto lpiirq_error;
- }
- }
-@@ -1885,8 +1885,8 @@ wolirq_error:
- init_error:
- free_dma_desc_resources(priv);
- dma_desc_error:
-- if (priv->phydev)
-- phy_disconnect(priv->phydev);
-+ if (dev->phydev)
-+ phy_disconnect(dev->phydev);
-
- return ret;
- }
-@@ -1905,10 +1905,9 @@ static int stmmac_release(struct net_dev
- del_timer_sync(&priv->eee_ctrl_timer);
-
- /* Stop and disconnect the PHY */
-- if (priv->phydev) {
-- phy_stop(priv->phydev);
-- phy_disconnect(priv->phydev);
-- priv->phydev = NULL;
-+ if (dev->phydev) {
-+ phy_stop(dev->phydev);
-+ phy_disconnect(dev->phydev);
- }
-
- netif_stop_queue(dev);
-@@ -1968,13 +1967,13 @@ static void stmmac_tso_allocator(struct
- priv->cur_tx = STMMAC_GET_ENTRY(priv->cur_tx, DMA_TX_SIZE);
- desc = priv->dma_tx + priv->cur_tx;
-
-- desc->des0 = des + (total_len - tmp_len);
-+ desc->des0 = cpu_to_le32(des + (total_len - tmp_len));
- buff_size = tmp_len >= TSO_MAX_BUFF_SIZE ?
- TSO_MAX_BUFF_SIZE : tmp_len;
-
- priv->hw->desc->prepare_tso_tx_desc(desc, 0, buff_size,
- 0, 1,
-- (last_segment) && (tmp_len <= TSO_MAX_BUFF_SIZE),
-+ (last_segment) && (buff_size < TSO_MAX_BUFF_SIZE),
- 0, 0);
-
- tmp_len -= TSO_MAX_BUFF_SIZE;
-@@ -2019,8 +2018,6 @@ static netdev_tx_t stmmac_tso_xmit(struc
- u8 proto_hdr_len;
- int i;
-
-- spin_lock(&priv->tx_lock);
--
- /* Compute header lengths */
- proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-
-@@ -2030,9 +2027,10 @@ static netdev_tx_t stmmac_tso_xmit(struc
- if (!netif_queue_stopped(dev)) {
- netif_stop_queue(dev);
- /* This is a hard error, log it. */
-- pr_err("%s: Tx Ring full when queue awake\n", __func__);
-+ netdev_err(priv->dev,
-+ "%s: Tx Ring full when queue awake\n",
-+ __func__);
- }
-- spin_unlock(&priv->tx_lock);
- return NETDEV_TX_BUSY;
- }
-
-@@ -2070,11 +2068,11 @@ static netdev_tx_t stmmac_tso_xmit(struc
- priv->tx_skbuff_dma[first_entry].len = skb_headlen(skb);
- priv->tx_skbuff[first_entry] = skb;
-
-- first->des0 = des;
-+ first->des0 = cpu_to_le32(des);
-
- /* Fill start of payload in buff2 of first descriptor */
- if (pay_len)
-- first->des1 = des + proto_hdr_len;
-+ first->des1 = cpu_to_le32(des + proto_hdr_len);
-
- /* If needed take extra descriptors to fill the remaining payload */
- tmp_pay_len = pay_len - TSO_MAX_BUFF_SIZE;
-@@ -2103,8 +2101,8 @@ static netdev_tx_t stmmac_tso_xmit(struc
- priv->cur_tx = STMMAC_GET_ENTRY(priv->cur_tx, DMA_TX_SIZE);
-
- if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
-- if (netif_msg_hw(priv))
-- pr_debug("%s: stop transmitted packets\n", __func__);
-+ netif_dbg(priv, hw, priv->dev, "%s: stop transmitted packets\n",
-+ __func__);
- netif_stop_queue(dev);
- }
-
-@@ -2155,7 +2153,7 @@ static netdev_tx_t stmmac_tso_xmit(struc
- * descriptor and then barrier is needed to make sure that
- * all is coherent before granting the DMA engine.
- */
-- smp_wmb();
-+ dma_wmb();
-
- if (netif_msg_pktdata(priv)) {
- pr_info("%s: curr=%d dirty=%d f=%d, e=%d, f_p=%p, nfrags %d\n",
-@@ -2174,11 +2172,9 @@ static netdev_tx_t stmmac_tso_xmit(struc
- priv->hw->dma->set_tx_tail_ptr(priv->ioaddr, priv->tx_tail_addr,
- STMMAC_CHAN0);
-
-- spin_unlock(&priv->tx_lock);
- return NETDEV_TX_OK;
-
- dma_map_err:
-- spin_unlock(&priv->tx_lock);
- dev_err(priv->device, "Tx dma map failed\n");
- dev_kfree_skb(skb);
- priv->dev->stats.tx_dropped++;
-@@ -2210,14 +2206,13 @@ static netdev_tx_t stmmac_xmit(struct sk
- return stmmac_tso_xmit(skb, dev);
- }
-
-- spin_lock(&priv->tx_lock);
--
- if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) {
-- spin_unlock(&priv->tx_lock);
- if (!netif_queue_stopped(dev)) {
- netif_stop_queue(dev);
- /* This is a hard error, log it. */
-- pr_err("%s: Tx Ring full when queue awake\n", __func__);
-+ netdev_err(priv->dev,
-+ "%s: Tx Ring full when queue awake\n",
-+ __func__);
- }
- return NETDEV_TX_BUSY;
- }
-@@ -2270,13 +2265,11 @@ static netdev_tx_t stmmac_xmit(struct sk
-
- priv->tx_skbuff[entry] = NULL;
-
-- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00)) {
-- desc->des0 = des;
-- priv->tx_skbuff_dma[entry].buf = desc->des0;
-- } else {
-- desc->des2 = des;
-- priv->tx_skbuff_dma[entry].buf = desc->des2;
-- }
-+ priv->tx_skbuff_dma[entry].buf = des;
-+ if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00))
-+ desc->des0 = cpu_to_le32(des);
-+ else
-+ desc->des2 = cpu_to_le32(des);
-
- priv->tx_skbuff_dma[entry].map_as_page = true;
- priv->tx_skbuff_dma[entry].len = len;
-@@ -2294,9 +2287,10 @@ static netdev_tx_t stmmac_xmit(struct sk
- if (netif_msg_pktdata(priv)) {
- void *tx_head;
-
-- pr_debug("%s: curr=%d dirty=%d f=%d, e=%d, first=%p, nfrags=%d",
-- __func__, priv->cur_tx, priv->dirty_tx, first_entry,
-- entry, first, nfrags);
-+ netdev_dbg(priv->dev,
-+ "%s: curr=%d dirty=%d f=%d, e=%d, first=%p, nfrags=%d",
-+ __func__, priv->cur_tx, priv->dirty_tx, first_entry,
-+ entry, first, nfrags);
-
- if (priv->extend_desc)
- tx_head = (void *)priv->dma_etx;
-@@ -2305,13 +2299,13 @@ static netdev_tx_t stmmac_xmit(struct sk
-
- priv->hw->desc->display_ring(tx_head, DMA_TX_SIZE, false);
-
-- pr_debug(">>> frame to be transmitted: ");
-+ netdev_dbg(priv->dev, ">>> frame to be transmitted: ");
- print_pkt(skb->data, skb->len);
- }
-
- if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
-- if (netif_msg_hw(priv))
-- pr_debug("%s: stop transmitted packets\n", __func__);
-+ netif_dbg(priv, hw, priv->dev, "%s: stop transmitted packets\n",
-+ __func__);
- netif_stop_queue(dev);
- }
-
-@@ -2347,13 +2341,11 @@ static netdev_tx_t stmmac_xmit(struct sk
- if (dma_mapping_error(priv->device, des))
- goto dma_map_err;
-
-- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00)) {
-- first->des0 = des;
-- priv->tx_skbuff_dma[first_entry].buf = first->des0;
-- } else {
-- first->des2 = des;
-- priv->tx_skbuff_dma[first_entry].buf = first->des2;
-- }
-+ priv->tx_skbuff_dma[first_entry].buf = des;
-+ if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00))
-+ first->des0 = cpu_to_le32(des);
-+ else
-+ first->des2 = cpu_to_le32(des);
-
- priv->tx_skbuff_dma[first_entry].len = nopaged_len;
- priv->tx_skbuff_dma[first_entry].last_segment = last_segment;
-@@ -2374,7 +2366,7 @@ static netdev_tx_t stmmac_xmit(struct sk
- * descriptor and then barrier is needed to make sure that
- * all is coherent before granting the DMA engine.
- */
-- smp_wmb();
-+ dma_wmb();
- }
-
- netdev_sent_queue(dev, skb->len);
-@@ -2385,12 +2377,10 @@ static netdev_tx_t stmmac_xmit(struct sk
- priv->hw->dma->set_tx_tail_ptr(priv->ioaddr, priv->tx_tail_addr,
- STMMAC_CHAN0);
-
-- spin_unlock(&priv->tx_lock);
- return NETDEV_TX_OK;
-
- dma_map_err:
-- spin_unlock(&priv->tx_lock);
-- dev_err(priv->device, "Tx dma map failed\n");
-+ netdev_err(priv->dev, "Tx DMA map failed\n");
- dev_kfree_skb(skb);
- priv->dev->stats.tx_dropped++;
- return NETDEV_TX_OK;
-@@ -2461,16 +2451,16 @@ static inline void stmmac_rx_refill(stru
- DMA_FROM_DEVICE);
- if (dma_mapping_error(priv->device,
- priv->rx_skbuff_dma[entry])) {
-- dev_err(priv->device, "Rx dma map failed\n");
-+ netdev_err(priv->dev, "Rx DMA map failed\n");
- dev_kfree_skb(skb);
- break;
- }
-
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00)) {
-- p->des0 = priv->rx_skbuff_dma[entry];
-+ p->des0 = cpu_to_le32(priv->rx_skbuff_dma[entry]);
- p->des1 = 0;
- } else {
-- p->des2 = priv->rx_skbuff_dma[entry];
-+ p->des2 = cpu_to_le32(priv->rx_skbuff_dma[entry]);
- }
- if (priv->hw->mode->refill_desc3)
- priv->hw->mode->refill_desc3(priv, p);
-@@ -2478,17 +2468,17 @@ static inline void stmmac_rx_refill(stru
- if (priv->rx_zeroc_thresh > 0)
- priv->rx_zeroc_thresh--;
-
-- if (netif_msg_rx_status(priv))
-- pr_debug("\trefill entry #%d\n", entry);
-+ netif_dbg(priv, rx_status, priv->dev,
-+ "refill entry #%d\n", entry);
- }
-- wmb();
-+ dma_wmb();
-
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00))
- priv->hw->desc->init_rx_desc(p, priv->use_riwt, 0, 0);
- else
- priv->hw->desc->set_rx_owner(p);
-
-- wmb();
-+ dma_wmb();
-
- entry = STMMAC_GET_ENTRY(entry, DMA_RX_SIZE);
- }
-@@ -2512,7 +2502,7 @@ static int stmmac_rx(struct stmmac_priv
- if (netif_msg_rx_status(priv)) {
- void *rx_head;
-
-- pr_info(">>>>>> %s: descriptor ring:\n", __func__);
-+ netdev_dbg(priv->dev, "%s: descriptor ring:\n", __func__);
- if (priv->extend_desc)
- rx_head = (void *)priv->dma_erx;
- else
-@@ -2574,9 +2564,9 @@ static int stmmac_rx(struct stmmac_priv
- unsigned int des;
-
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00))
-- des = p->des0;
-+ des = le32_to_cpu(p->des0);
- else
-- des = p->des2;
-+ des = le32_to_cpu(p->des2);
-
- frame_len = priv->hw->desc->get_rx_frame_len(p, coe);
-
-@@ -2585,9 +2575,9 @@ static int stmmac_rx(struct stmmac_priv
- * ignored
- */
- if (frame_len > priv->dma_buf_sz) {
-- pr_err("%s: len %d larger than size (%d)\n",
-- priv->dev->name, frame_len,
-- priv->dma_buf_sz);
-+ netdev_err(priv->dev,
-+ "len %d larger than size (%d)\n",
-+ frame_len, priv->dma_buf_sz);
- priv->dev->stats.rx_length_errors++;
- break;
- }
-@@ -2599,11 +2589,11 @@ static int stmmac_rx(struct stmmac_priv
- frame_len -= ETH_FCS_LEN;
-
- if (netif_msg_rx_status(priv)) {
-- pr_info("\tdesc: %p [entry %d] buff=0x%x\n",
-- p, entry, des);
-+ netdev_dbg(priv->dev, "\tdesc: %p [entry %d] buff=0x%x\n",
-+ p, entry, des);
- if (frame_len > ETH_FRAME_LEN)
-- pr_debug("\tframe size %d, COE: %d\n",
-- frame_len, status);
-+ netdev_dbg(priv->dev, "frame size %d, COE: %d\n",
-+ frame_len, status);
- }
-
- /* The zero-copy is always used for all the sizes
-@@ -2640,8 +2630,9 @@ static int stmmac_rx(struct stmmac_priv
- } else {
- skb = priv->rx_skbuff[entry];
- if (unlikely(!skb)) {
-- pr_err("%s: Inconsistent Rx chain\n",
-- priv->dev->name);
-+ netdev_err(priv->dev,
-+ "%s: Inconsistent Rx chain\n",
-+ priv->dev->name);
- priv->dev->stats.rx_dropped++;
- break;
- }
-@@ -2657,7 +2648,8 @@ static int stmmac_rx(struct stmmac_priv
- }
-
- if (netif_msg_pktdata(priv)) {
-- pr_debug("frame received (%dbytes)", frame_len);
-+ netdev_dbg(priv->dev, "frame received (%dbytes)",
-+ frame_len);
- print_pkt(skb->data, frame_len);
- }
-
-@@ -2760,7 +2752,7 @@ static int stmmac_change_mtu(struct net_
- int max_mtu;
-
- if (netif_running(dev)) {
-- pr_err("%s: must be stopped to change its MTU\n", dev->name);
-+ netdev_err(priv->dev, "must be stopped to change its MTU\n");
- return -EBUSY;
- }
-
-@@ -2852,7 +2844,7 @@ static irqreturn_t stmmac_interrupt(int
- pm_wakeup_event(priv->device, 0);
-
- if (unlikely(!dev)) {
-- pr_err("%s: invalid dev pointer\n", __func__);
-+ netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__);
- return IRQ_NONE;
- }
-
-@@ -2910,7 +2902,6 @@ static void stmmac_poll_controller(struc
- */
- static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
-- struct stmmac_priv *priv = netdev_priv(dev);
- int ret = -EOPNOTSUPP;
-
- if (!netif_running(dev))
-@@ -2920,9 +2911,9 @@ static int stmmac_ioctl(struct net_devic
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
-- if (!priv->phydev)
-+ if (!dev->phydev)
- return -EINVAL;
-- ret = phy_mii_ioctl(priv->phydev, rq, cmd);
-+ ret = phy_mii_ioctl(dev->phydev, rq, cmd);
- break;
- case SIOCSHWTSTAMP:
- ret = stmmac_hwtstamp_ioctl(dev, rq);
-@@ -2950,14 +2941,17 @@ static void sysfs_display_ring(void *hea
- x = *(u64 *) ep;
- seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
- i, (unsigned int)virt_to_phys(ep),
-- ep->basic.des0, ep->basic.des1,
-- ep->basic.des2, ep->basic.des3);
-+ le32_to_cpu(ep->basic.des0),
-+ le32_to_cpu(ep->basic.des1),
-+ le32_to_cpu(ep->basic.des2),
-+ le32_to_cpu(ep->basic.des3));
- ep++;
- } else {
- x = *(u64 *) p;
- seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
- i, (unsigned int)virt_to_phys(ep),
-- p->des0, p->des1, p->des2, p->des3);
-+ le32_to_cpu(p->des0), le32_to_cpu(p->des1),
-+ le32_to_cpu(p->des2), le32_to_cpu(p->des3));
- p++;
- }
- seq_printf(seq, "\n");
-@@ -2989,6 +2983,8 @@ static int stmmac_sysfs_ring_open(struct
- return single_open(file, stmmac_sysfs_ring_read, inode->i_private);
- }
-
-+/* Debugfs files, should appear in /sys/kernel/debug/stmmaceth/eth0 */
-+
- static const struct file_operations stmmac_rings_status_fops = {
- .owner = THIS_MODULE,
- .open = stmmac_sysfs_ring_open,
-@@ -3011,11 +3007,11 @@ static int stmmac_sysfs_dma_cap_read(str
- seq_printf(seq, "\tDMA HW features\n");
- seq_printf(seq, "==============================\n");
-
-- seq_printf(seq, "\t10/100 Mbps %s\n",
-+ seq_printf(seq, "\t10/100 Mbps: %s\n",
- (priv->dma_cap.mbps_10_100) ? "Y" : "N");
-- seq_printf(seq, "\t1000 Mbps %s\n",
-+ seq_printf(seq, "\t1000 Mbps: %s\n",
- (priv->dma_cap.mbps_1000) ? "Y" : "N");
-- seq_printf(seq, "\tHalf duple %s\n",
-+ seq_printf(seq, "\tHalf duplex: %s\n",
- (priv->dma_cap.half_duplex) ? "Y" : "N");
- seq_printf(seq, "\tHash Filter: %s\n",
- (priv->dma_cap.hash_filter) ? "Y" : "N");
-@@ -3033,9 +3029,9 @@ static int stmmac_sysfs_dma_cap_read(str
- (priv->dma_cap.rmon) ? "Y" : "N");
- seq_printf(seq, "\tIEEE 1588-2002 Time Stamp: %s\n",
- (priv->dma_cap.time_stamp) ? "Y" : "N");
-- seq_printf(seq, "\tIEEE 1588-2008 Advanced Time Stamp:%s\n",
-+ seq_printf(seq, "\tIEEE 1588-2008 Advanced Time Stamp: %s\n",
- (priv->dma_cap.atime_stamp) ? "Y" : "N");
-- seq_printf(seq, "\t802.3az - Energy-Efficient Ethernet (EEE) %s\n",
-+ seq_printf(seq, "\t802.3az - Energy-Efficient Ethernet (EEE): %s\n",
- (priv->dma_cap.eee) ? "Y" : "N");
- seq_printf(seq, "\tAV features: %s\n", (priv->dma_cap.av) ? "Y" : "N");
- seq_printf(seq, "\tChecksum Offload in TX: %s\n",
-@@ -3082,8 +3078,7 @@ static int stmmac_init_fs(struct net_dev
- priv->dbgfs_dir = debugfs_create_dir(dev->name, stmmac_fs_dir);
-
- if (!priv->dbgfs_dir || IS_ERR(priv->dbgfs_dir)) {
-- pr_err("ERROR %s/%s, debugfs create directory failed\n",
-- STMMAC_RESOURCE_NAME, dev->name);
-+ netdev_err(priv->dev, "ERROR failed to create debugfs directory\n");
-
- return -ENOMEM;
- }
-@@ -3095,7 +3090,7 @@ static int stmmac_init_fs(struct net_dev
- &stmmac_rings_status_fops);
-
- if (!priv->dbgfs_rings_status || IS_ERR(priv->dbgfs_rings_status)) {
-- pr_info("ERROR creating stmmac ring debugfs file\n");
-+ netdev_err(priv->dev, "ERROR creating stmmac ring debugfs file\n");
- debugfs_remove_recursive(priv->dbgfs_dir);
-
- return -ENOMEM;
-@@ -3107,7 +3102,7 @@ static int stmmac_init_fs(struct net_dev
- dev, &stmmac_dma_cap_fops);
-
- if (!priv->dbgfs_dma_cap || IS_ERR(priv->dbgfs_dma_cap)) {
-- pr_info("ERROR creating stmmac MMC debugfs file\n");
-+ netdev_err(priv->dev, "ERROR creating stmmac MMC debugfs file\n");
- debugfs_remove_recursive(priv->dbgfs_dir);
-
- return -ENOMEM;
-@@ -3179,11 +3174,11 @@ static int stmmac_hw_init(struct stmmac_
- } else {
- if (chain_mode) {
- priv->hw->mode = &chain_mode_ops;
-- pr_info(" Chain mode enabled\n");
-+ dev_info(priv->device, "Chain mode enabled\n");
- priv->mode = STMMAC_CHAIN_MODE;
- } else {
- priv->hw->mode = &ring_mode_ops;
-- pr_info(" Ring mode enabled\n");
-+ dev_info(priv->device, "Ring mode enabled\n");
- priv->mode = STMMAC_RING_MODE;
- }
- }
-@@ -3191,7 +3186,7 @@ static int stmmac_hw_init(struct stmmac_
- /* Get the HW capability (new GMAC newer than 3.50a) */
- priv->hw_cap_support = stmmac_get_hw_features(priv);
- if (priv->hw_cap_support) {
-- pr_info(" DMA HW capability register supported");
-+ dev_info(priv->device, "DMA HW capability register supported\n");
-
- /* We can override some gmac/dma configuration fields: e.g.
- * enh_desc, tx_coe (e.g. that are passed through the
-@@ -3216,8 +3211,9 @@ static int stmmac_hw_init(struct stmmac_
- else if (priv->dma_cap.rx_coe_type1)
- priv->plat->rx_coe = STMMAC_RX_COE_TYPE1;
-
-- } else
-- pr_info(" No HW DMA feature register supported");
-+ } else {
-+ dev_info(priv->device, "No HW DMA feature register supported\n");
-+ }
-
- /* To use alternate (extended), normal or GMAC4 descriptor structures */
- if (priv->synopsys_id >= DWMAC_CORE_4_00)
-@@ -3227,20 +3223,20 @@ static int stmmac_hw_init(struct stmmac_
-
- if (priv->plat->rx_coe) {
- priv->hw->rx_csum = priv->plat->rx_coe;
-- pr_info(" RX Checksum Offload Engine supported\n");
-+ dev_info(priv->device, "RX Checksum Offload Engine supported\n");
- if (priv->synopsys_id < DWMAC_CORE_4_00)
-- pr_info("\tCOE Type %d\n", priv->hw->rx_csum);
-+ dev_info(priv->device, "COE Type %d\n", priv->hw->rx_csum);
- }
- if (priv->plat->tx_coe)
-- pr_info(" TX Checksum insertion supported\n");
-+ dev_info(priv->device, "TX Checksum insertion supported\n");
-
- if (priv->plat->pmt) {
-- pr_info(" Wake-Up On Lan supported\n");
-+ dev_info(priv->device, "Wake-Up On Lan supported\n");
- device_set_wakeup_capable(priv->device, 1);
- }
-
- if (priv->dma_cap.tsoen)
-- pr_info(" TSO supported\n");
-+ dev_info(priv->device, "TSO supported\n");
-
- return 0;
- }
-@@ -3299,8 +3295,8 @@ int stmmac_dvr_probe(struct device *devi
-
- priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME);
- if (IS_ERR(priv->stmmac_clk)) {
-- dev_warn(priv->device, "%s: warning: cannot get CSR clock\n",
-- __func__);
-+ netdev_warn(priv->dev, "%s: warning: cannot get CSR clock\n",
-+ __func__);
- /* If failed to obtain stmmac_clk and specific clk_csr value
- * is NOT passed from the platform, probe fail.
- */
-@@ -3349,7 +3345,7 @@ int stmmac_dvr_probe(struct device *devi
- if ((priv->plat->tso_en) && (priv->dma_cap.tsoen)) {
- ndev->hw_features |= NETIF_F_TSO;
- priv->tso = true;
-- pr_info(" TSO feature enabled\n");
-+ dev_info(priv->device, "TSO feature enabled\n");
- }
- ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
- ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
-@@ -3369,13 +3365,13 @@ int stmmac_dvr_probe(struct device *devi
- */
- if ((priv->synopsys_id >= DWMAC_CORE_3_50) && (!priv->plat->riwt_off)) {
- priv->use_riwt = 1;
-- pr_info(" Enable RX Mitigation via HW Watchdog Timer\n");
-+ dev_info(priv->device,
-+ "Enable RX Mitigation via HW Watchdog Timer\n");
- }
-
- netif_napi_add(ndev, &priv->napi, stmmac_poll, 64);
-
- spin_lock_init(&priv->lock);
-- spin_lock_init(&priv->tx_lock);
-
- /* If a specific clk_csr value is passed from the platform
- * this means that the CSR Clock Range selection cannot be
-@@ -3396,15 +3392,17 @@ int stmmac_dvr_probe(struct device *devi
- /* MDIO bus Registration */
- ret = stmmac_mdio_register(ndev);
- if (ret < 0) {
-- pr_debug("%s: MDIO bus (id: %d) registration failed",
-- __func__, priv->plat->bus_id);
-- goto error_napi_register;
-+ dev_err(priv->device,
-+ "%s: MDIO bus (id: %d) registration failed",
-+ __func__, priv->plat->bus_id);
-+ goto error_mdio_register;
- }
- }
-
- ret = register_netdev(ndev);
- if (ret) {
-- pr_err("%s: ERROR %i registering the device\n", __func__, ret);
-+ dev_err(priv->device, "%s: ERROR %i registering the device\n",
-+ __func__, ret);
- goto error_netdev_register;
- }
-
-@@ -3415,7 +3413,7 @@ error_netdev_register:
- priv->hw->pcs != STMMAC_PCS_TBI &&
- priv->hw->pcs != STMMAC_PCS_RTBI)
- stmmac_mdio_unregister(ndev);
--error_napi_register:
-+error_mdio_register:
- netif_napi_del(&priv->napi);
- error_hw_init:
- clk_disable_unprepare(priv->pclk);
-@@ -3439,7 +3437,7 @@ int stmmac_dvr_remove(struct device *dev
- struct net_device *ndev = dev_get_drvdata(dev);
- struct stmmac_priv *priv = netdev_priv(ndev);
-
-- pr_info("%s:\n\tremoving driver", __func__);
-+ netdev_info(priv->dev, "%s: removing driver", __func__);
-
- priv->hw->dma->stop_rx(priv->ioaddr);
- priv->hw->dma->stop_tx(priv->ioaddr);
-@@ -3477,8 +3475,8 @@ int stmmac_suspend(struct device *dev)
- if (!ndev || !netif_running(ndev))
- return 0;
-
-- if (priv->phydev)
-- phy_stop(priv->phydev);
-+ if (ndev->phydev)
-+ phy_stop(ndev->phydev);
-
- spin_lock_irqsave(&priv->lock, flags);
-
-@@ -3572,8 +3570,8 @@ int stmmac_resume(struct device *dev)
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
-- if (priv->phydev)
-- phy_start(priv->phydev);
-+ if (ndev->phydev)
-+ phy_start(ndev->phydev);
-
- return 0;
- }
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
-@@ -42,13 +42,6 @@
- #define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
- #define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
-
--#define MII_PHY_ADDR_GMAC4_SHIFT 21
--#define MII_PHY_ADDR_GMAC4_MASK GENMASK(25, 21)
--#define MII_PHY_REG_GMAC4_SHIFT 16
--#define MII_PHY_REG_GMAC4_MASK GENMASK(20, 16)
--#define MII_CSR_CLK_GMAC4_SHIFT 8
--#define MII_CSR_CLK_GMAC4_MASK GENMASK(11, 8)
--
- static int stmmac_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_addr)
- {
- unsigned long curr;
-@@ -68,8 +61,8 @@ static int stmmac_mdio_busy_wait(void __
- /**
- * stmmac_mdio_read
- * @bus: points to the mii_bus structure
-- * @phyaddr: MII addr reg bits 15-11
-- * @phyreg: MII addr reg bits 10-6
-+ * @phyaddr: MII addr
-+ * @phyreg: MII reg
- * Description: it reads data from the MII register from within the phy device.
- * For the 7111 GMAC, we must set the bit 0 in the MII address register while
- * accessing the PHY registers.
-@@ -83,14 +76,20 @@ static int stmmac_mdio_read(struct mii_b
- unsigned int mii_data = priv->hw->mii.data;
-
- int data;
-- u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
-- ((phyreg << 6) & (0x000007C0)));
-- regValue |= MII_BUSY | ((priv->clk_csr & 0xF) << 2);
-+ u32 value = MII_BUSY;
-+
-+ value |= (phyaddr << priv->hw->mii.addr_shift)
-+ & priv->hw->mii.addr_mask;
-+ value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
-+ value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
-+ & priv->hw->mii.clk_csr_mask;
-+ if (priv->plat->has_gmac4)
-+ value |= MII_GMAC4_READ;
-
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
- return -EBUSY;
-
-- writel(regValue, priv->ioaddr + mii_address);
-+ writel(value, priv->ioaddr + mii_address);
-
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
- return -EBUSY;
-@@ -104,8 +103,8 @@ static int stmmac_mdio_read(struct mii_b
- /**
- * stmmac_mdio_write
- * @bus: points to the mii_bus structure
-- * @phyaddr: MII addr reg bits 15-11
-- * @phyreg: MII addr reg bits 10-6
-+ * @phyaddr: MII addr
-+ * @phyreg: MII reg
- * @phydata: phy data
- * Description: it writes the data into the MII register from within the device.
- */
-@@ -117,85 +116,18 @@ static int stmmac_mdio_write(struct mii_
- unsigned int mii_address = priv->hw->mii.addr;
- unsigned int mii_data = priv->hw->mii.data;
-
-- u16 value =
-- (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
-- | MII_WRITE;
--
-- value |= MII_BUSY | ((priv->clk_csr & 0xF) << 2);
--
-- /* Wait until any existing MII operation is complete */
-- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
-- return -EBUSY;
--
-- /* Set the MII address register to write */
-- writel(phydata, priv->ioaddr + mii_data);
-- writel(value, priv->ioaddr + mii_address);
--
-- /* Wait until any existing MII operation is complete */
-- return stmmac_mdio_busy_wait(priv->ioaddr, mii_address);
--}
--
--/**
-- * stmmac_mdio_read_gmac4
-- * @bus: points to the mii_bus structure
-- * @phyaddr: MII addr reg bits 25-21
-- * @phyreg: MII addr reg bits 20-16
-- * Description: it reads data from the MII register of GMAC4 from within
-- * the phy device.
-- */
--static int stmmac_mdio_read_gmac4(struct mii_bus *bus, int phyaddr, int phyreg)
--{
-- struct net_device *ndev = bus->priv;
-- struct stmmac_priv *priv = netdev_priv(ndev);
-- unsigned int mii_address = priv->hw->mii.addr;
-- unsigned int mii_data = priv->hw->mii.data;
-- int data;
-- u32 value = (((phyaddr << MII_PHY_ADDR_GMAC4_SHIFT) &
-- (MII_PHY_ADDR_GMAC4_MASK)) |
-- ((phyreg << MII_PHY_REG_GMAC4_SHIFT) &
-- (MII_PHY_REG_GMAC4_MASK))) | MII_GMAC4_READ;
--
-- value |= MII_BUSY | ((priv->clk_csr & MII_CSR_CLK_GMAC4_MASK)
-- << MII_CSR_CLK_GMAC4_SHIFT);
--
-- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
-- return -EBUSY;
--
-- writel(value, priv->ioaddr + mii_address);
--
-- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
-- return -EBUSY;
--
-- /* Read the data from the MII data register */
-- data = (int)readl(priv->ioaddr + mii_data);
--
-- return data;
--}
--
--/**
-- * stmmac_mdio_write_gmac4
-- * @bus: points to the mii_bus structure
-- * @phyaddr: MII addr reg bits 25-21
-- * @phyreg: MII addr reg bits 20-16
-- * @phydata: phy data
-- * Description: it writes the data into the MII register of GMAC4 from within
-- * the device.
-- */
--static int stmmac_mdio_write_gmac4(struct mii_bus *bus, int phyaddr, int phyreg,
-- u16 phydata)
--{
-- struct net_device *ndev = bus->priv;
-- struct stmmac_priv *priv = netdev_priv(ndev);
-- unsigned int mii_address = priv->hw->mii.addr;
-- unsigned int mii_data = priv->hw->mii.data;
--
-- u32 value = (((phyaddr << MII_PHY_ADDR_GMAC4_SHIFT) &
-- (MII_PHY_ADDR_GMAC4_MASK)) |
-- ((phyreg << MII_PHY_REG_GMAC4_SHIFT) &
-- (MII_PHY_REG_GMAC4_MASK))) | MII_GMAC4_WRITE;
-+ u32 value = MII_BUSY;
-
-- value |= MII_BUSY | ((priv->clk_csr & MII_CSR_CLK_GMAC4_MASK)
-- << MII_CSR_CLK_GMAC4_SHIFT);
-+ value |= (phyaddr << priv->hw->mii.addr_shift)
-+ & priv->hw->mii.addr_mask;
-+ value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
-+
-+ value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
-+ & priv->hw->mii.clk_csr_mask;
-+ if (priv->plat->has_gmac4)
-+ value |= MII_GMAC4_WRITE;
-+ else
-+ value |= MII_WRITE;
-
- /* Wait until any existing MII operation is complete */
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
-@@ -260,7 +192,7 @@ int stmmac_mdio_reset(struct mii_bus *bu
- #endif
-
- if (data->phy_reset) {
-- pr_debug("stmmac_mdio_reset: calling phy_reset\n");
-+ netdev_dbg(ndev, "stmmac_mdio_reset: calling phy_reset\n");
- data->phy_reset(priv->plat->bsp_priv);
- }
-
-@@ -305,13 +237,8 @@ int stmmac_mdio_register(struct net_devi
- #endif
-
- new_bus->name = "stmmac";
-- if (priv->plat->has_gmac4) {
-- new_bus->read = &stmmac_mdio_read_gmac4;
-- new_bus->write = &stmmac_mdio_write_gmac4;
-- } else {
-- new_bus->read = &stmmac_mdio_read;
-- new_bus->write = &stmmac_mdio_write;
-- }
-+ new_bus->read = &stmmac_mdio_read;
-+ new_bus->write = &stmmac_mdio_write;
-
- new_bus->reset = &stmmac_mdio_reset;
- snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x",
-@@ -325,7 +252,7 @@ int stmmac_mdio_register(struct net_devi
- else
- err = mdiobus_register(new_bus);
- if (err != 0) {
-- pr_err("%s: Cannot register as MDIO bus\n", new_bus->name);
-+ netdev_err(ndev, "Cannot register the MDIO bus\n");
- goto bus_register_fail;
- }
-
-@@ -372,16 +299,16 @@ int stmmac_mdio_register(struct net_devi
- irq_str = irq_num;
- break;
- }
-- pr_info("%s: PHY ID %08x at %d IRQ %s (%s)%s\n",
-- ndev->name, phydev->phy_id, addr,
-- irq_str, phydev_name(phydev),
-- act ? " active" : "");
-+ netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
-+ phydev->phy_id, addr,
-+ irq_str, phydev_name(phydev),
-+ act ? " active" : "");
- found = 1;
- }
- }
-
- if (!found && !mdio_node) {
-- pr_warn("%s: No PHY found\n", ndev->name);
-+ netdev_warn(ndev, "No PHY found\n");
- mdiobus_unregister(new_bus);
- mdiobus_free(new_bus);
- return -ENODEV;
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
-@@ -81,6 +81,7 @@ static void stmmac_default_data(struct p
- plat->mdio_bus_data->phy_mask = 0;
-
- plat->dma_cfg->pbl = 32;
-+ plat->dma_cfg->pblx8 = true;
- /* TODO: AXI */
-
- /* Set default value for multicast hash bins */
-@@ -88,6 +89,9 @@ static void stmmac_default_data(struct p
-
- /* Set default value for unicast filter entries */
- plat->unicast_filter_entries = 1;
-+
-+ /* Set the maxmtu to a default of JUMBO_LEN */
-+ plat->maxmtu = JUMBO_LEN;
- }
-
- static int quark_default_data(struct plat_stmmacenet_data *plat,
-@@ -115,6 +119,7 @@ static int quark_default_data(struct pla
- plat->mdio_bus_data->phy_mask = 0;
-
- plat->dma_cfg->pbl = 16;
-+ plat->dma_cfg->pblx8 = true;
- plat->dma_cfg->fixed_burst = 1;
- /* AXI (TODO) */
-
-@@ -124,6 +129,9 @@ static int quark_default_data(struct pla
- /* Set default value for unicast filter entries */
- plat->unicast_filter_entries = 1;
-
-+ /* Set the maxmtu to a default of JUMBO_LEN */
-+ plat->maxmtu = JUMBO_LEN;
-+
- return 0;
- }
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-@@ -292,6 +292,7 @@ stmmac_probe_config_dt(struct platform_d
- if (of_device_is_compatible(np, "snps,dwmac-4.00") ||
- of_device_is_compatible(np, "snps,dwmac-4.10a")) {
- plat->has_gmac4 = 1;
-+ plat->has_gmac = 0;
- plat->pmt = 1;
- plat->tso_en = of_property_read_bool(np, "snps,tso");
- }
-@@ -303,21 +304,25 @@ stmmac_probe_config_dt(struct platform_d
- plat->force_sf_dma_mode = 1;
- }
-
-- if (of_find_property(np, "snps,pbl", NULL)) {
-- dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
-- GFP_KERNEL);
-- if (!dma_cfg) {
-- stmmac_remove_config_dt(pdev, plat);
-- return ERR_PTR(-ENOMEM);
-- }
-- plat->dma_cfg = dma_cfg;
-- of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
-- dma_cfg->aal = of_property_read_bool(np, "snps,aal");
-- dma_cfg->fixed_burst =
-- of_property_read_bool(np, "snps,fixed-burst");
-- dma_cfg->mixed_burst =
-- of_property_read_bool(np, "snps,mixed-burst");
-- }
-+ dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
-+ GFP_KERNEL);
-+ if (!dma_cfg) {
-+ stmmac_remove_config_dt(pdev, plat);
-+ return ERR_PTR(-ENOMEM);
-+ }
-+ plat->dma_cfg = dma_cfg;
-+
-+ of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
-+ if (!dma_cfg->pbl)
-+ dma_cfg->pbl = DEFAULT_DMA_PBL;
-+ of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl);
-+ of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl);
-+ dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8");
-+
-+ dma_cfg->aal = of_property_read_bool(np, "snps,aal");
-+ dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
-+ dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
-+
- plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
- if (plat->force_thresh_dma_mode) {
- plat->force_sf_dma_mode = 0;
-@@ -445,9 +450,7 @@ static int stmmac_pltfr_suspend(struct d
- struct platform_device *pdev = to_platform_device(dev);
-
- ret = stmmac_suspend(dev);
-- if (priv->plat->suspend)
-- priv->plat->suspend(pdev, priv->plat->bsp_priv);
-- else if (priv->plat->exit)
-+ if (priv->plat->exit)
- priv->plat->exit(pdev, priv->plat->bsp_priv);
-
- return ret;
-@@ -466,9 +469,7 @@ static int stmmac_pltfr_resume(struct de
- struct stmmac_priv *priv = netdev_priv(ndev);
- struct platform_device *pdev = to_platform_device(dev);
-
-- if (priv->plat->resume)
-- priv->plat->resume(pdev, priv->plat->bsp_priv);
-- else if (priv->plat->init)
-+ if (priv->plat->init)
- priv->plat->init(pdev, priv->plat->bsp_priv);
-
- return stmmac_resume(dev);
---- a/include/linux/stmmac.h
-+++ b/include/linux/stmmac.h
-@@ -88,6 +88,9 @@ struct stmmac_mdio_bus_data {
-
- struct stmmac_dma_cfg {
- int pbl;
-+ int txpbl;
-+ int rxpbl;
-+ bool pblx8;
- int fixed_burst;
- int mixed_burst;
- bool aal;
-@@ -135,8 +138,6 @@ struct plat_stmmacenet_data {
- void (*bus_setup)(void __iomem *ioaddr);
- int (*init)(struct platform_device *pdev, void *priv);
- void (*exit)(struct platform_device *pdev, void *priv);
-- void (*suspend)(struct platform_device *pdev, void *priv);
-- void (*resume)(struct platform_device *pdev, void *priv);
- void *bsp_priv;
- struct stmmac_axi *axi;
- int has_gmac4;
diff --git a/target/linux/sunxi/patches-4.9/0051-stmmac-form-4-11.patch b/target/linux/sunxi/patches-4.9/0051-stmmac-form-4-11.patch
deleted file mode 100644
index 2ce23e2eb5..0000000000
--- a/target/linux/sunxi/patches-4.9/0051-stmmac-form-4-11.patch
+++ /dev/null
@@ -1,2296 +0,0 @@
---- a/Documentation/devicetree/bindings/net/stmmac.txt
-+++ b/Documentation/devicetree/bindings/net/stmmac.txt
-@@ -49,6 +49,8 @@ Optional properties:
- - snps,force_sf_dma_mode Force DMA to use the Store and Forward
- mode for both tx and rx. This flag is
- ignored if force_thresh_dma_mode is set.
-+- snps,en-tx-lpi-clockgating Enable gating of the MAC TX clock during
-+ TX low-power mode
- - snps,multicast-filter-bins: Number of multicast filter hash bins
- supported by this device instance
- - snps,perfect-filter-entries: Number of perfect filter entries supported
-@@ -65,7 +67,6 @@ Optional properties:
- - snps,wr_osr_lmt: max write outstanding req. limit
- - snps,rd_osr_lmt: max read outstanding req. limit
- - snps,kbbe: do not cross 1KiB boundary.
-- - snps,axi_all: align address
- - snps,blen: this is a vector of supported burst length.
- - snps,fb: fixed-burst
- - snps,mb: mixed-burst
---- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
-+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
-@@ -1,5 +1,5 @@
- config STMMAC_ETH
-- tristate "STMicroelectronics 10/100/1000 Ethernet driver"
-+ tristate "STMicroelectronics 10/100/1000/EQOS Ethernet driver"
- depends on HAS_IOMEM && HAS_DMA
- select MII
- select PHYLIB
-@@ -7,9 +7,8 @@ config STMMAC_ETH
- select PTP_1588_CLOCK
- select RESET_CONTROLLER
- ---help---
-- This is the driver for the Ethernet IPs are built around a
-- Synopsys IP Core and only tested on the STMicroelectronics
-- platforms.
-+ This is the driver for the Ethernet IPs built around a
-+ Synopsys IP Core.
-
- if STMMAC_ETH
-
-@@ -29,6 +28,15 @@ config STMMAC_PLATFORM
-
- if STMMAC_PLATFORM
-
-+config DWMAC_DWC_QOS_ETH
-+ tristate "Support for snps,dwc-qos-ethernet.txt DT binding."
-+ select PHYLIB
-+ select CRC32
-+ select MII
-+ depends on OF && HAS_DMA
-+ help
-+ Support for chips using the snps,dwc-qos-ethernet.txt DT binding.
-+
- config DWMAC_GENERIC
- tristate "Generic driver for DWMAC"
- default STMMAC_PLATFORM
-@@ -143,11 +151,11 @@ config STMMAC_PCI
- tristate "STMMAC PCI bus support"
- depends on STMMAC_ETH && PCI
- ---help---
-- This is to select the Synopsys DWMAC available on PCI devices,
-- if you have a controller with this interface, say Y or M here.
-+ This selects the platform specific bus support for the stmmac driver.
-+ This driver was tested on XLINX XC2V3000 FF1152AMT0221
-+ D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit.
-
-- This PCI support is tested on XLINX XC2V3000 FF1152AMT0221
-- D1215994A VIRTEX FPGA board.
-+ If you have a controller with this interface, say Y or M here.
-
- If unsure, say N.
- endif
---- a/drivers/net/ethernet/stmicro/stmmac/Makefile
-+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-alt
- obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
- obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o
- obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
-+obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o
- obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
- stmmac-platform-objs:= stmmac_platform.o
- dwmac-altr-socfpga-objs := altr_tse_pcs.o dwmac-socfpga.o
---- a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
-@@ -16,10 +16,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/common.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -71,7 +67,7 @@ struct stmmac_extra_stats {
- unsigned long overflow_error;
- unsigned long ipc_csum_error;
- unsigned long rx_collision;
-- unsigned long rx_crc;
-+ unsigned long rx_crc_errors;
- unsigned long dribbling_bit;
- unsigned long rx_length;
- unsigned long rx_mii;
-@@ -323,6 +319,9 @@ struct dma_features {
- /* TX and RX number of channels */
- unsigned int number_rx_channel;
- unsigned int number_tx_channel;
-+ /* TX and RX number of queues */
-+ unsigned int number_rx_queues;
-+ unsigned int number_tx_queues;
- /* Alternate (enhanced) DESC mode */
- unsigned int enh_desc;
- };
-@@ -340,7 +339,7 @@ struct dma_features {
- /* Common MAC defines */
- #define MAC_CTRL_REG 0x00000000 /* MAC Control */
- #define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
--#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */
-+#define MAC_ENABLE_RX 0x00000004 /* Receiver Enable */
-
- /* Default LPI timers */
- #define STMMAC_DEFAULT_LIT_LS 0x3E8
-@@ -417,7 +416,7 @@ struct stmmac_dma_ops {
- /* Configure the AXI Bus Mode Register */
- void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
- /* Dump DMA registers */
-- void (*dump_regs) (void __iomem *ioaddr);
-+ void (*dump_regs)(void __iomem *ioaddr, u32 *reg_space);
- /* Set tx/rx threshold in the csr6 register
- * An invalid value enables the store-and-forward mode */
- void (*dma_mode)(void __iomem *ioaddr, int txmode, int rxmode,
-@@ -454,8 +453,10 @@ struct stmmac_ops {
- void (*core_init)(struct mac_device_info *hw, int mtu);
- /* Enable and verify that the IPC module is supported */
- int (*rx_ipc)(struct mac_device_info *hw);
-+ /* Enable RX Queues */
-+ void (*rx_queue_enable)(struct mac_device_info *hw, u32 queue);
- /* Dump MAC registers */
-- void (*dump_regs)(struct mac_device_info *hw);
-+ void (*dump_regs)(struct mac_device_info *hw, u32 *reg_space);
- /* Handle extra events on specific interrupts hw dependent */
- int (*host_irq_status)(struct mac_device_info *hw,
- struct stmmac_extra_stats *x);
-@@ -471,7 +472,8 @@ struct stmmac_ops {
- unsigned int reg_n);
- void (*get_umac_addr)(struct mac_device_info *hw, unsigned char *addr,
- unsigned int reg_n);
-- void (*set_eee_mode)(struct mac_device_info *hw);
-+ void (*set_eee_mode)(struct mac_device_info *hw,
-+ bool en_tx_lpi_clockgating);
- void (*reset_eee_mode)(struct mac_device_info *hw);
- void (*set_eee_timer)(struct mac_device_info *hw, int ls, int tw);
- void (*set_eee_pls)(struct mac_device_info *hw, int link);
---- a/drivers/net/ethernet/stmicro/stmmac/descs.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/descs.h
-@@ -11,10 +11,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
-@@ -17,10 +17,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- /dev/null
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
-@@ -0,0 +1,202 @@
-+/*
-+ * Synopsys DWC Ethernet Quality-of-Service v4.10a linux driver
-+ *
-+ * Copyright (C) 2016 Joao Pinto <jpinto@synopsys.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/device.h>
-+#include <linux/ethtool.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/of_net.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/platform_device.h>
-+#include <linux/stmmac.h>
-+
-+#include "stmmac_platform.h"
-+
-+static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
-+ struct plat_stmmacenet_data *plat_dat)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ u32 burst_map = 0;
-+ u32 bit_index = 0;
-+ u32 a_index = 0;
-+
-+ if (!plat_dat->axi) {
-+ plat_dat->axi = kzalloc(sizeof(struct stmmac_axi), GFP_KERNEL);
-+
-+ if (!plat_dat->axi)
-+ return -ENOMEM;
-+ }
-+
-+ plat_dat->axi->axi_lpi_en = of_property_read_bool(np, "snps,en-lpi");
-+ if (of_property_read_u32(np, "snps,write-requests",
-+ &plat_dat->axi->axi_wr_osr_lmt)) {
-+ /**
-+ * Since the register has a reset value of 1, if property
-+ * is missing, default to 1.
-+ */
-+ plat_dat->axi->axi_wr_osr_lmt = 1;
-+ } else {
-+ /**
-+ * If property exists, to keep the behavior from dwc_eth_qos,
-+ * subtract one after parsing.
-+ */
-+ plat_dat->axi->axi_wr_osr_lmt--;
-+ }
-+
-+ if (of_property_read_u32(np, "read,read-requests",
-+ &plat_dat->axi->axi_rd_osr_lmt)) {
-+ /**
-+ * Since the register has a reset value of 1, if property
-+ * is missing, default to 1.
-+ */
-+ plat_dat->axi->axi_rd_osr_lmt = 1;
-+ } else {
-+ /**
-+ * If property exists, to keep the behavior from dwc_eth_qos,
-+ * subtract one after parsing.
-+ */
-+ plat_dat->axi->axi_rd_osr_lmt--;
-+ }
-+ of_property_read_u32(np, "snps,burst-map", &burst_map);
-+
-+ /* converts burst-map bitmask to burst array */
-+ for (bit_index = 0; bit_index < 7; bit_index++) {
-+ if (burst_map & (1 << bit_index)) {
-+ switch (bit_index) {
-+ case 0:
-+ plat_dat->axi->axi_blen[a_index] = 4; break;
-+ case 1:
-+ plat_dat->axi->axi_blen[a_index] = 8; break;
-+ case 2:
-+ plat_dat->axi->axi_blen[a_index] = 16; break;
-+ case 3:
-+ plat_dat->axi->axi_blen[a_index] = 32; break;
-+ case 4:
-+ plat_dat->axi->axi_blen[a_index] = 64; break;
-+ case 5:
-+ plat_dat->axi->axi_blen[a_index] = 128; break;
-+ case 6:
-+ plat_dat->axi->axi_blen[a_index] = 256; break;
-+ default:
-+ break;
-+ }
-+ a_index++;
-+ }
-+ }
-+
-+ /* dwc-qos needs GMAC4, AAL, TSO and PMT */
-+ plat_dat->has_gmac4 = 1;
-+ plat_dat->dma_cfg->aal = 1;
-+ plat_dat->tso_en = 1;
-+ plat_dat->pmt = 1;
-+
-+ return 0;
-+}
-+
-+static int dwc_eth_dwmac_probe(struct platform_device *pdev)
-+{
-+ struct plat_stmmacenet_data *plat_dat;
-+ struct stmmac_resources stmmac_res;
-+ struct resource *res;
-+ int ret;
-+
-+ memset(&stmmac_res, 0, sizeof(struct stmmac_resources));
-+
-+ /**
-+ * Since stmmac_platform supports name IRQ only, basic platform
-+ * resource initialization is done in the glue logic.
-+ */
-+ stmmac_res.irq = platform_get_irq(pdev, 0);
-+ if (stmmac_res.irq < 0) {
-+ if (stmmac_res.irq != -EPROBE_DEFER)
-+ dev_err(&pdev->dev,
-+ "IRQ configuration information not found\n");
-+
-+ return stmmac_res.irq;
-+ }
-+ stmmac_res.wol_irq = stmmac_res.irq;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ stmmac_res.addr = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(stmmac_res.addr))
-+ return PTR_ERR(stmmac_res.addr);
-+
-+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+ if (IS_ERR(plat_dat))
-+ return PTR_ERR(plat_dat);
-+
-+ plat_dat->stmmac_clk = devm_clk_get(&pdev->dev, "apb_pclk");
-+ if (IS_ERR(plat_dat->stmmac_clk)) {
-+ dev_err(&pdev->dev, "apb_pclk clock not found.\n");
-+ ret = PTR_ERR(plat_dat->stmmac_clk);
-+ plat_dat->stmmac_clk = NULL;
-+ goto err_remove_config_dt;
-+ }
-+ clk_prepare_enable(plat_dat->stmmac_clk);
-+
-+ plat_dat->pclk = devm_clk_get(&pdev->dev, "phy_ref_clk");
-+ if (IS_ERR(plat_dat->pclk)) {
-+ dev_err(&pdev->dev, "phy_ref_clk clock not found.\n");
-+ ret = PTR_ERR(plat_dat->pclk);
-+ plat_dat->pclk = NULL;
-+ goto err_out_clk_dis_phy;
-+ }
-+ clk_prepare_enable(plat_dat->pclk);
-+
-+ ret = dwc_eth_dwmac_config_dt(pdev, plat_dat);
-+ if (ret)
-+ goto err_out_clk_dis_aper;
-+
-+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
-+ if (ret)
-+ goto err_out_clk_dis_aper;
-+
-+ return 0;
-+
-+err_out_clk_dis_aper:
-+ clk_disable_unprepare(plat_dat->pclk);
-+err_out_clk_dis_phy:
-+ clk_disable_unprepare(plat_dat->stmmac_clk);
-+err_remove_config_dt:
-+ stmmac_remove_config_dt(pdev, plat_dat);
-+
-+ return ret;
-+}
-+
-+static int dwc_eth_dwmac_remove(struct platform_device *pdev)
-+{
-+ return stmmac_pltfr_remove(pdev);
-+}
-+
-+static const struct of_device_id dwc_eth_dwmac_match[] = {
-+ { .compatible = "snps,dwc-qos-ethernet-4.10", },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, dwc_eth_dwmac_match);
-+
-+static struct platform_driver dwc_eth_dwmac_driver = {
-+ .probe = dwc_eth_dwmac_probe,
-+ .remove = dwc_eth_dwmac_remove,
-+ .driver = {
-+ .name = "dwc-eth-dwmac",
-+ .of_match_table = dwc_eth_dwmac_match,
-+ },
-+};
-+module_platform_driver(dwc_eth_dwmac_driver);
-+
-+MODULE_AUTHOR("Joao Pinto <jpinto@synopsys.com>");
-+MODULE_DESCRIPTION("Synopsys DWC Ethernet Quality-of-Service v4.10a driver");
-+MODULE_LICENSE("GPL v2");
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
-@@ -35,10 +35,6 @@
-
- #define PRG_ETH0_TXDLY_SHIFT 5
- #define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)
--#define PRG_ETH0_TXDLY_OFF (0x0 << PRG_ETH0_TXDLY_SHIFT)
--#define PRG_ETH0_TXDLY_QUARTER (0x1 << PRG_ETH0_TXDLY_SHIFT)
--#define PRG_ETH0_TXDLY_HALF (0x2 << PRG_ETH0_TXDLY_SHIFT)
--#define PRG_ETH0_TXDLY_THREE_QUARTERS (0x3 << PRG_ETH0_TXDLY_SHIFT)
-
- /* divider for the result of m250_sel */
- #define PRG_ETH0_CLK_M250_DIV_SHIFT 7
-@@ -69,6 +65,8 @@ struct meson8b_dwmac {
-
- struct clk_divider m25_div;
- struct clk *m25_div_clk;
-+
-+ u32 tx_delay_ns;
- };
-
- static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
-@@ -181,11 +179,19 @@ static int meson8b_init_prg_eth(struct m
- {
- int ret;
- unsigned long clk_rate;
-+ u8 tx_dly_val = 0;
-
- switch (dwmac->phy_mode) {
- case PHY_INTERFACE_MODE_RGMII:
-- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
-+ /* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
-+ * 8ns are exactly one cycle of the 125MHz RGMII TX clock):
-+ * 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
-+ */
-+ tx_dly_val = dwmac->tx_delay_ns >> 1;
-+ /* fall through */
-+
-+ case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_TXID:
- /* Generate a 25MHz clock for the PHY */
- clk_rate = 25 * 1000 * 1000;
-@@ -198,9 +204,8 @@ static int meson8b_init_prg_eth(struct m
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
- PRG_ETH0_INVERTED_RMII_CLK, 0);
-
-- /* TX clock delay - all known boards use a 1/4 cycle delay */
- meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
-- PRG_ETH0_TXDLY_QUARTER);
-+ tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
- break;
-
- case PHY_INTERFACE_MODE_RMII:
-@@ -286,6 +291,11 @@ static int meson8b_dwmac_probe(struct pl
- goto err_remove_config_dt;
- }
-
-+ /* use 2ns as fallback since this value was previously hardcoded */
-+ if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
-+ &dwmac->tx_delay_ns))
-+ dwmac->tx_delay_ns = 2;
-+
- ret = meson8b_init_clk(dwmac);
- if (ret)
- goto err_remove_config_dt;
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
-@@ -302,6 +302,122 @@ static const struct rk_gmac_ops rk3288_o
- .set_rmii_speed = rk3288_set_rmii_speed,
- };
-
-+#define RK3328_GRF_MAC_CON0 0x0900
-+#define RK3328_GRF_MAC_CON1 0x0904
-+
-+/* RK3328_GRF_MAC_CON0 */
-+#define RK3328_GMAC_CLK_RX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 7)
-+#define RK3328_GMAC_CLK_TX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 0)
-+
-+/* RK3328_GRF_MAC_CON1 */
-+#define RK3328_GMAC_PHY_INTF_SEL_RGMII \
-+ (GRF_BIT(4) | GRF_CLR_BIT(5) | GRF_CLR_BIT(6))
-+#define RK3328_GMAC_PHY_INTF_SEL_RMII \
-+ (GRF_CLR_BIT(4) | GRF_CLR_BIT(5) | GRF_BIT(6))
-+#define RK3328_GMAC_FLOW_CTRL GRF_BIT(3)
-+#define RK3328_GMAC_FLOW_CTRL_CLR GRF_CLR_BIT(3)
-+#define RK3328_GMAC_SPEED_10M GRF_CLR_BIT(2)
-+#define RK3328_GMAC_SPEED_100M GRF_BIT(2)
-+#define RK3328_GMAC_RMII_CLK_25M GRF_BIT(7)
-+#define RK3328_GMAC_RMII_CLK_2_5M GRF_CLR_BIT(7)
-+#define RK3328_GMAC_CLK_125M (GRF_CLR_BIT(11) | GRF_CLR_BIT(12))
-+#define RK3328_GMAC_CLK_25M (GRF_BIT(11) | GRF_BIT(12))
-+#define RK3328_GMAC_CLK_2_5M (GRF_CLR_BIT(11) | GRF_BIT(12))
-+#define RK3328_GMAC_RMII_MODE GRF_BIT(9)
-+#define RK3328_GMAC_RMII_MODE_CLR GRF_CLR_BIT(9)
-+#define RK3328_GMAC_TXCLK_DLY_ENABLE GRF_BIT(0)
-+#define RK3328_GMAC_TXCLK_DLY_DISABLE GRF_CLR_BIT(0)
-+#define RK3328_GMAC_RXCLK_DLY_ENABLE GRF_BIT(1)
-+#define RK3328_GMAC_RXCLK_DLY_DISABLE GRF_CLR_BIT(0)
-+
-+static void rk3328_set_to_rgmii(struct rk_priv_data *bsp_priv,
-+ int tx_delay, int rx_delay)
-+{
-+ struct device *dev = &bsp_priv->pdev->dev;
-+
-+ if (IS_ERR(bsp_priv->grf)) {
-+ dev_err(dev, "Missing rockchip,grf property\n");
-+ return;
-+ }
-+
-+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
-+ RK3328_GMAC_PHY_INTF_SEL_RGMII |
-+ RK3328_GMAC_RMII_MODE_CLR |
-+ RK3328_GMAC_RXCLK_DLY_ENABLE |
-+ RK3328_GMAC_TXCLK_DLY_ENABLE);
-+
-+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON0,
-+ RK3328_GMAC_CLK_RX_DL_CFG(rx_delay) |
-+ RK3328_GMAC_CLK_TX_DL_CFG(tx_delay));
-+}
-+
-+static void rk3328_set_to_rmii(struct rk_priv_data *bsp_priv)
-+{
-+ struct device *dev = &bsp_priv->pdev->dev;
-+
-+ if (IS_ERR(bsp_priv->grf)) {
-+ dev_err(dev, "Missing rockchip,grf property\n");
-+ return;
-+ }
-+
-+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
-+ RK3328_GMAC_PHY_INTF_SEL_RMII |
-+ RK3328_GMAC_RMII_MODE);
-+
-+ /* set MAC to RMII mode */
-+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1, GRF_BIT(11));
-+}
-+
-+static void rk3328_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
-+{
-+ struct device *dev = &bsp_priv->pdev->dev;
-+
-+ if (IS_ERR(bsp_priv->grf)) {
-+ dev_err(dev, "Missing rockchip,grf property\n");
-+ return;
-+ }
-+
-+ if (speed == 10)
-+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
-+ RK3328_GMAC_CLK_2_5M);
-+ else if (speed == 100)
-+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
-+ RK3328_GMAC_CLK_25M);
-+ else if (speed == 1000)
-+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
-+ RK3328_GMAC_CLK_125M);
-+ else
-+ dev_err(dev, "unknown speed value for RGMII! speed=%d", speed);
-+}
-+
-+static void rk3328_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
-+{
-+ struct device *dev = &bsp_priv->pdev->dev;
-+
-+ if (IS_ERR(bsp_priv->grf)) {
-+ dev_err(dev, "Missing rockchip,grf property\n");
-+ return;
-+ }
-+
-+ if (speed == 10)
-+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
-+ RK3328_GMAC_RMII_CLK_2_5M |
-+ RK3328_GMAC_SPEED_10M);
-+ else if (speed == 100)
-+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
-+ RK3328_GMAC_RMII_CLK_25M |
-+ RK3328_GMAC_SPEED_100M);
-+ else
-+ dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
-+}
-+
-+static const struct rk_gmac_ops rk3328_ops = {
-+ .set_to_rgmii = rk3328_set_to_rgmii,
-+ .set_to_rmii = rk3328_set_to_rmii,
-+ .set_rgmii_speed = rk3328_set_rgmii_speed,
-+ .set_rmii_speed = rk3328_set_rmii_speed,
-+};
-+
- #define RK3366_GRF_SOC_CON6 0x0418
- #define RK3366_GRF_SOC_CON7 0x041c
-
-@@ -1006,6 +1122,7 @@ static SIMPLE_DEV_PM_OPS(rk_gmac_pm_ops,
- static const struct of_device_id rk_gmac_dwmac_match[] = {
- { .compatible = "rockchip,rk3228-gmac", .data = &rk3228_ops },
- { .compatible = "rockchip,rk3288-gmac", .data = &rk3288_ops },
-+ { .compatible = "rockchip,rk3328-gmac", .data = &rk3328_ops },
- { .compatible = "rockchip,rk3366-gmac", .data = &rk3366_ops },
- { .compatible = "rockchip,rk3368-gmac", .data = &rk3368_ops },
- { .compatible = "rockchip,rk3399-gmac", .data = &rk3399_ops },
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
-@@ -351,7 +351,7 @@ static int socfpga_dwmac_probe(struct pl
- * mode. Create a copy of the core reset handle so it can be used by
- * the driver later.
- */
-- dwmac->stmmac_rst = stpriv->stmmac_rst;
-+ dwmac->stmmac_rst = stpriv->plat->stmmac_rst;
-
- ret = socfpga_dwmac_set_phy_mode(dwmac);
- if (ret)
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
-@@ -10,10 +10,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
-@@ -16,10 +16,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -96,17 +92,13 @@ static int dwmac1000_rx_ipc_enable(struc
- return !!(value & GMAC_CONTROL_IPC);
- }
-
--static void dwmac1000_dump_regs(struct mac_device_info *hw)
-+static void dwmac1000_dump_regs(struct mac_device_info *hw, u32 *reg_space)
- {
- void __iomem *ioaddr = hw->pcsr;
- int i;
-- pr_info("\tDWMAC1000 regs (base addr = 0x%p)\n", ioaddr);
-
-- for (i = 0; i < 55; i++) {
-- int offset = i * 4;
-- pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i,
-- offset, readl(ioaddr + offset));
-- }
-+ for (i = 0; i < 55; i++)
-+ reg_space[i] = readl(ioaddr + i * 4);
- }
-
- static void dwmac1000_set_umac_addr(struct mac_device_info *hw,
-@@ -347,11 +339,14 @@ static int dwmac1000_irq_status(struct m
- return ret;
- }
-
--static void dwmac1000_set_eee_mode(struct mac_device_info *hw)
-+static void dwmac1000_set_eee_mode(struct mac_device_info *hw,
-+ bool en_tx_lpi_clockgating)
- {
- void __iomem *ioaddr = hw->pcsr;
- u32 value;
-
-+ /*TODO - en_tx_lpi_clockgating treatment */
-+
- /* Enable the link status receive on RGMII, SGMII ore SMII
- * receive path and instruct the transmit to enter in LPI
- * state.
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
-@@ -16,10 +16,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -205,18 +201,14 @@ static void dwmac1000_dma_operation_mode
- writel(csr6, ioaddr + DMA_CONTROL);
- }
-
--static void dwmac1000_dump_dma_regs(void __iomem *ioaddr)
-+static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
- {
- int i;
-- pr_info(" DMA registers\n");
-- for (i = 0; i < 22; i++) {
-- if ((i < 9) || (i > 17)) {
-- int offset = i * 4;
-- pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i,
-- (DMA_BUS_MODE + offset),
-- readl(ioaddr + DMA_BUS_MODE + offset));
-- }
-- }
-+
-+ for (i = 0; i < 22; i++)
-+ if ((i < 9) || (i > 17))
-+ reg_space[DMA_BUS_MODE / 4 + i] =
-+ readl(ioaddr + DMA_BUS_MODE + i * 4);
- }
-
- static void dwmac1000_get_hw_feature(void __iomem *ioaddr,
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
-@@ -18,10 +18,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -44,28 +40,18 @@ static void dwmac100_core_init(struct ma
- #endif
- }
-
--static void dwmac100_dump_mac_regs(struct mac_device_info *hw)
-+static void dwmac100_dump_mac_regs(struct mac_device_info *hw, u32 *reg_space)
- {
- void __iomem *ioaddr = hw->pcsr;
-- pr_info("\t----------------------------------------------\n"
-- "\t DWMAC 100 CSR (base addr = 0x%p)\n"
-- "\t----------------------------------------------\n", ioaddr);
-- pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL,
-- readl(ioaddr + MAC_CONTROL));
-- pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH,
-- readl(ioaddr + MAC_ADDR_HIGH));
-- pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW,
-- readl(ioaddr + MAC_ADDR_LOW));
-- pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n",
-- MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH));
-- pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n",
-- MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW));
-- pr_info("\tflow control (offset 0x%x): 0x%08x\n",
-- MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL));
-- pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1,
-- readl(ioaddr + MAC_VLAN1));
-- pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2,
-- readl(ioaddr + MAC_VLAN2));
-+
-+ reg_space[MAC_CONTROL / 4] = readl(ioaddr + MAC_CONTROL);
-+ reg_space[MAC_ADDR_HIGH / 4] = readl(ioaddr + MAC_ADDR_HIGH);
-+ reg_space[MAC_ADDR_LOW / 4] = readl(ioaddr + MAC_ADDR_LOW);
-+ reg_space[MAC_HASH_HIGH / 4] = readl(ioaddr + MAC_HASH_HIGH);
-+ reg_space[MAC_HASH_LOW / 4] = readl(ioaddr + MAC_HASH_LOW);
-+ reg_space[MAC_FLOW_CTRL / 4] = readl(ioaddr + MAC_FLOW_CTRL);
-+ reg_space[MAC_VLAN1 / 4] = readl(ioaddr + MAC_VLAN1);
-+ reg_space[MAC_VLAN2 / 4] = readl(ioaddr + MAC_VLAN2);
- }
-
- static int dwmac100_rx_ipc_enable(struct mac_device_info *hw)
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
-@@ -18,10 +18,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -70,19 +66,18 @@ static void dwmac100_dma_operation_mode(
- writel(csr6, ioaddr + DMA_CONTROL);
- }
-
--static void dwmac100_dump_dma_regs(void __iomem *ioaddr)
-+static void dwmac100_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
- {
- int i;
-
-- pr_debug("DWMAC 100 DMA CSR\n");
- for (i = 0; i < 9; i++)
-- pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i,
-- (DMA_BUS_MODE + i * 4),
-- readl(ioaddr + DMA_BUS_MODE + i * 4));
--
-- pr_debug("\tCSR20 (0x%x): 0x%08x, CSR21 (0x%x): 0x%08x\n",
-- DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR),
-- DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR));
-+ reg_space[DMA_BUS_MODE / 4 + i] =
-+ readl(ioaddr + DMA_BUS_MODE + i * 4);
-+
-+ reg_space[DMA_CUR_TX_BUF_ADDR / 4] =
-+ readl(ioaddr + DMA_CUR_TX_BUF_ADDR);
-+ reg_space[DMA_CUR_RX_BUF_ADDR / 4] =
-+ readl(ioaddr + DMA_CUR_RX_BUF_ADDR);
- }
-
- /* DMA controller has two counters to track the number of the missed frames. */
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
-@@ -22,6 +22,7 @@
- #define GMAC_HASH_TAB_32_63 0x00000014
- #define GMAC_RX_FLOW_CTRL 0x00000090
- #define GMAC_QX_TX_FLOW_CTRL(x) (0x70 + x * 4)
-+#define GMAC_RXQ_CTRL0 0x000000a0
- #define GMAC_INT_STATUS 0x000000b0
- #define GMAC_INT_EN 0x000000b4
- #define GMAC_PCS_BASE 0x000000e0
-@@ -44,6 +45,11 @@
-
- #define GMAC_MAX_PERFECT_ADDRESSES 128
-
-+/* MAC RX Queue Enable */
-+#define GMAC_RX_QUEUE_CLEAR(queue) ~(GENMASK(1, 0) << ((queue) * 2))
-+#define GMAC_RX_AV_QUEUE_ENABLE(queue) BIT((queue) * 2)
-+#define GMAC_RX_DCB_QUEUE_ENABLE(queue) BIT(((queue) * 2) + 1)
-+
- /* MAC Flow Control RX */
- #define GMAC_RX_FLOW_CTRL_RFE BIT(0)
-
-@@ -84,6 +90,19 @@ enum power_event {
- power_down = 0x00000001,
- };
-
-+/* Energy Efficient Ethernet (EEE) for GMAC4
-+ *
-+ * LPI status, timer and control register offset
-+ */
-+#define GMAC4_LPI_CTRL_STATUS 0xd0
-+#define GMAC4_LPI_TIMER_CTRL 0xd4
-+
-+/* LPI control and status defines */
-+#define GMAC4_LPI_CTRL_STATUS_LPITCSE BIT(21) /* LPI Tx Clock Stop Enable */
-+#define GMAC4_LPI_CTRL_STATUS_LPITXA BIT(19) /* Enable LPI TX Automate */
-+#define GMAC4_LPI_CTRL_STATUS_PLS BIT(17) /* PHY Link Status */
-+#define GMAC4_LPI_CTRL_STATUS_LPIEN BIT(16) /* LPI Enable */
-+
- /* MAC Debug bitmap */
- #define GMAC_DEBUG_TFCSTS_MASK GENMASK(18, 17)
- #define GMAC_DEBUG_TFCSTS_SHIFT 17
-@@ -133,6 +152,8 @@ enum power_event {
- /* MAC HW features2 bitmap */
- #define GMAC_HW_FEAT_TXCHCNT GENMASK(21, 18)
- #define GMAC_HW_FEAT_RXCHCNT GENMASK(15, 12)
-+#define GMAC_HW_FEAT_TXQCNT GENMASK(9, 6)
-+#define GMAC_HW_FEAT_RXQCNT GENMASK(3, 0)
-
- /* MAC HW ADDR regs */
- #define GMAC_HI_DCS GENMASK(18, 16)
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
-@@ -59,19 +59,24 @@ static void dwmac4_core_init(struct mac_
- writel(value, ioaddr + GMAC_INT_EN);
- }
-
--static void dwmac4_dump_regs(struct mac_device_info *hw)
-+static void dwmac4_rx_queue_enable(struct mac_device_info *hw, u32 queue)
- {
- void __iomem *ioaddr = hw->pcsr;
-- int i;
-+ u32 value = readl(ioaddr + GMAC_RXQ_CTRL0);
-
-- pr_debug("\tDWMAC4 regs (base addr = 0x%p)\n", ioaddr);
-+ value &= GMAC_RX_QUEUE_CLEAR(queue);
-+ value |= GMAC_RX_AV_QUEUE_ENABLE(queue);
-
-- for (i = 0; i < GMAC_REG_NUM; i++) {
-- int offset = i * 4;
-+ writel(value, ioaddr + GMAC_RXQ_CTRL0);
-+}
-
-- pr_debug("\tReg No. %d (offset 0x%x): 0x%08x\n", i,
-- offset, readl(ioaddr + offset));
-- }
-+static void dwmac4_dump_regs(struct mac_device_info *hw, u32 *reg_space)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ int i;
-+
-+ for (i = 0; i < GMAC_REG_NUM; i++)
-+ reg_space[i] = readl(ioaddr + i * 4);
- }
-
- static int dwmac4_rx_ipc_enable(struct mac_device_info *hw)
-@@ -126,6 +131,65 @@ static void dwmac4_get_umac_addr(struct
- GMAC_ADDR_LOW(reg_n));
- }
-
-+static void dwmac4_set_eee_mode(struct mac_device_info *hw,
-+ bool en_tx_lpi_clockgating)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 value;
-+
-+ /* Enable the link status receive on RGMII, SGMII ore SMII
-+ * receive path and instruct the transmit to enter in LPI
-+ * state.
-+ */
-+ value = readl(ioaddr + GMAC4_LPI_CTRL_STATUS);
-+ value |= GMAC4_LPI_CTRL_STATUS_LPIEN | GMAC4_LPI_CTRL_STATUS_LPITXA;
-+
-+ if (en_tx_lpi_clockgating)
-+ value |= GMAC4_LPI_CTRL_STATUS_LPITCSE;
-+
-+ writel(value, ioaddr + GMAC4_LPI_CTRL_STATUS);
-+}
-+
-+static void dwmac4_reset_eee_mode(struct mac_device_info *hw)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 value;
-+
-+ value = readl(ioaddr + GMAC4_LPI_CTRL_STATUS);
-+ value &= ~(GMAC4_LPI_CTRL_STATUS_LPIEN | GMAC4_LPI_CTRL_STATUS_LPITXA);
-+ writel(value, ioaddr + GMAC4_LPI_CTRL_STATUS);
-+}
-+
-+static void dwmac4_set_eee_pls(struct mac_device_info *hw, int link)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 value;
-+
-+ value = readl(ioaddr + GMAC4_LPI_CTRL_STATUS);
-+
-+ if (link)
-+ value |= GMAC4_LPI_CTRL_STATUS_PLS;
-+ else
-+ value &= ~GMAC4_LPI_CTRL_STATUS_PLS;
-+
-+ writel(value, ioaddr + GMAC4_LPI_CTRL_STATUS);
-+}
-+
-+static void dwmac4_set_eee_timer(struct mac_device_info *hw, int ls, int tw)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ int value = ((tw & 0xffff)) | ((ls & 0x3ff) << 16);
-+
-+ /* Program the timers in the LPI timer control register:
-+ * LS: minimum time (ms) for which the link
-+ * status from PHY should be ok before transmitting
-+ * the LPI pattern.
-+ * TW: minimum time (us) for which the core waits
-+ * after it has stopped transmitting the LPI pattern.
-+ */
-+ writel(value, ioaddr + GMAC4_LPI_TIMER_CTRL);
-+}
-+
- static void dwmac4_set_filter(struct mac_device_info *hw,
- struct net_device *dev)
- {
-@@ -392,12 +456,17 @@ static void dwmac4_debug(void __iomem *i
- static const struct stmmac_ops dwmac4_ops = {
- .core_init = dwmac4_core_init,
- .rx_ipc = dwmac4_rx_ipc_enable,
-+ .rx_queue_enable = dwmac4_rx_queue_enable,
- .dump_regs = dwmac4_dump_regs,
- .host_irq_status = dwmac4_irq_status,
- .flow_ctrl = dwmac4_flow_ctrl,
- .pmt = dwmac4_pmt,
- .set_umac_addr = dwmac4_set_umac_addr,
- .get_umac_addr = dwmac4_get_umac_addr,
-+ .set_eee_mode = dwmac4_set_eee_mode,
-+ .reset_eee_mode = dwmac4_reset_eee_mode,
-+ .set_eee_timer = dwmac4_set_eee_timer,
-+ .set_eee_pls = dwmac4_set_eee_pls,
- .pcs_ctrl_ane = dwmac4_ctrl_ane,
- .pcs_rane = dwmac4_rane,
- .pcs_get_adv_lp = dwmac4_get_adv_lp,
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
-@@ -103,7 +103,7 @@ static int dwmac4_wrback_get_rx_status(v
- x->rx_mii++;
-
- if (unlikely(rdes3 & RDES3_CRC_ERROR)) {
-- x->rx_crc++;
-+ x->rx_crc_errors++;
- stats->rx_crc_errors++;
- }
-
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
-@@ -127,53 +127,51 @@ static void dwmac4_dma_init(void __iomem
- dwmac4_dma_init_channel(ioaddr, dma_cfg, dma_tx, dma_rx, i);
- }
-
--static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel)
-+static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel,
-+ u32 *reg_space)
- {
-- pr_debug(" Channel %d\n", channel);
-- pr_debug("\tDMA_CHAN_CONTROL, offset: 0x%x, val: 0x%x\n", 0,
-- readl(ioaddr + DMA_CHAN_CONTROL(channel)));
-- pr_debug("\tDMA_CHAN_TX_CONTROL, offset: 0x%x, val: 0x%x\n", 0x4,
-- readl(ioaddr + DMA_CHAN_TX_CONTROL(channel)));
-- pr_debug("\tDMA_CHAN_RX_CONTROL, offset: 0x%x, val: 0x%x\n", 0x8,
-- readl(ioaddr + DMA_CHAN_RX_CONTROL(channel)));
-- pr_debug("\tDMA_CHAN_TX_BASE_ADDR, offset: 0x%x, val: 0x%x\n", 0x14,
-- readl(ioaddr + DMA_CHAN_TX_BASE_ADDR(channel)));
-- pr_debug("\tDMA_CHAN_RX_BASE_ADDR, offset: 0x%x, val: 0x%x\n", 0x1c,
-- readl(ioaddr + DMA_CHAN_RX_BASE_ADDR(channel)));
-- pr_debug("\tDMA_CHAN_TX_END_ADDR, offset: 0x%x, val: 0x%x\n", 0x20,
-- readl(ioaddr + DMA_CHAN_TX_END_ADDR(channel)));
-- pr_debug("\tDMA_CHAN_RX_END_ADDR, offset: 0x%x, val: 0x%x\n", 0x28,
-- readl(ioaddr + DMA_CHAN_RX_END_ADDR(channel)));
-- pr_debug("\tDMA_CHAN_TX_RING_LEN, offset: 0x%x, val: 0x%x\n", 0x2c,
-- readl(ioaddr + DMA_CHAN_TX_RING_LEN(channel)));
-- pr_debug("\tDMA_CHAN_RX_RING_LEN, offset: 0x%x, val: 0x%x\n", 0x30,
-- readl(ioaddr + DMA_CHAN_RX_RING_LEN(channel)));
-- pr_debug("\tDMA_CHAN_INTR_ENA, offset: 0x%x, val: 0x%x\n", 0x34,
-- readl(ioaddr + DMA_CHAN_INTR_ENA(channel)));
-- pr_debug("\tDMA_CHAN_RX_WATCHDOG, offset: 0x%x, val: 0x%x\n", 0x38,
-- readl(ioaddr + DMA_CHAN_RX_WATCHDOG(channel)));
-- pr_debug("\tDMA_CHAN_SLOT_CTRL_STATUS, offset: 0x%x, val: 0x%x\n", 0x3c,
-- readl(ioaddr + DMA_CHAN_SLOT_CTRL_STATUS(channel)));
-- pr_debug("\tDMA_CHAN_CUR_TX_DESC, offset: 0x%x, val: 0x%x\n", 0x44,
-- readl(ioaddr + DMA_CHAN_CUR_TX_DESC(channel)));
-- pr_debug("\tDMA_CHAN_CUR_RX_DESC, offset: 0x%x, val: 0x%x\n", 0x4c,
-- readl(ioaddr + DMA_CHAN_CUR_RX_DESC(channel)));
-- pr_debug("\tDMA_CHAN_CUR_TX_BUF_ADDR, offset: 0x%x, val: 0x%x\n", 0x54,
-- readl(ioaddr + DMA_CHAN_CUR_TX_BUF_ADDR(channel)));
-- pr_debug("\tDMA_CHAN_CUR_RX_BUF_ADDR, offset: 0x%x, val: 0x%x\n", 0x5c,
-- readl(ioaddr + DMA_CHAN_CUR_RX_BUF_ADDR(channel)));
-- pr_debug("\tDMA_CHAN_STATUS, offset: 0x%x, val: 0x%x\n", 0x60,
-- readl(ioaddr + DMA_CHAN_STATUS(channel)));
-+ reg_space[DMA_CHAN_CONTROL(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_CONTROL(channel));
-+ reg_space[DMA_CHAN_TX_CONTROL(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_TX_CONTROL(channel));
-+ reg_space[DMA_CHAN_RX_CONTROL(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_RX_CONTROL(channel));
-+ reg_space[DMA_CHAN_TX_BASE_ADDR(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_TX_BASE_ADDR(channel));
-+ reg_space[DMA_CHAN_RX_BASE_ADDR(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_RX_BASE_ADDR(channel));
-+ reg_space[DMA_CHAN_TX_END_ADDR(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_TX_END_ADDR(channel));
-+ reg_space[DMA_CHAN_RX_END_ADDR(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_RX_END_ADDR(channel));
-+ reg_space[DMA_CHAN_TX_RING_LEN(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_TX_RING_LEN(channel));
-+ reg_space[DMA_CHAN_RX_RING_LEN(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_RX_RING_LEN(channel));
-+ reg_space[DMA_CHAN_INTR_ENA(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_INTR_ENA(channel));
-+ reg_space[DMA_CHAN_RX_WATCHDOG(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_RX_WATCHDOG(channel));
-+ reg_space[DMA_CHAN_SLOT_CTRL_STATUS(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_SLOT_CTRL_STATUS(channel));
-+ reg_space[DMA_CHAN_CUR_TX_DESC(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_CUR_TX_DESC(channel));
-+ reg_space[DMA_CHAN_CUR_RX_DESC(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_CUR_RX_DESC(channel));
-+ reg_space[DMA_CHAN_CUR_TX_BUF_ADDR(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_CUR_TX_BUF_ADDR(channel));
-+ reg_space[DMA_CHAN_CUR_RX_BUF_ADDR(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_CUR_RX_BUF_ADDR(channel));
-+ reg_space[DMA_CHAN_STATUS(channel) / 4] =
-+ readl(ioaddr + DMA_CHAN_STATUS(channel));
- }
-
--static void dwmac4_dump_dma_regs(void __iomem *ioaddr)
-+static void dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
- {
- int i;
-
-- pr_debug(" GMAC4 DMA registers\n");
--
- for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
-- _dwmac4_dump_dma_regs(ioaddr, i);
-+ _dwmac4_dump_dma_regs(ioaddr, i, reg_space);
- }
-
- static void dwmac4_rx_watchdog(void __iomem *ioaddr, u32 riwt)
-@@ -303,6 +301,11 @@ static void dwmac4_get_hw_feature(void _
- ((hw_cap & GMAC_HW_FEAT_RXCHCNT) >> 12) + 1;
- dma_cap->number_tx_channel =
- ((hw_cap & GMAC_HW_FEAT_TXCHCNT) >> 18) + 1;
-+ /* TX and RX number of queues */
-+ dma_cap->number_rx_queues =
-+ ((hw_cap & GMAC_HW_FEAT_RXQCNT) >> 0) + 1;
-+ dma_cap->number_tx_queues =
-+ ((hw_cap & GMAC_HW_FEAT_TXQCNT) >> 6) + 1;
-
- /* IEEE 1588-2002 */
- dma_cap->time_stamp = 0;
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
-@@ -10,10 +10,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -21,6 +17,7 @@
- *******************************************************************************/
-
- #include <linux/io.h>
-+#include <linux/iopoll.h>
- #include "common.h"
- #include "dwmac_dma.h"
-
-@@ -29,19 +26,16 @@
- int dwmac_dma_reset(void __iomem *ioaddr)
- {
- u32 value = readl(ioaddr + DMA_BUS_MODE);
-- int limit;
-+ int err;
-
- /* DMA SW reset */
- value |= DMA_BUS_MODE_SFT_RESET;
- writel(value, ioaddr + DMA_BUS_MODE);
-- limit = 10;
-- while (limit--) {
-- if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
-- break;
-- mdelay(10);
-- }
-
-- if (limit < 0)
-+ err = readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
-+ !(value & DMA_BUS_MODE_SFT_RESET),
-+ 100000, 10000);
-+ if (err)
- return -EBUSY;
-
- return 0;
-@@ -102,7 +96,7 @@ static void show_tx_process_state(unsign
- pr_debug("- TX (Stopped): Reset or Stop command\n");
- break;
- case 1:
-- pr_debug("- TX (Running):Fetching the Tx desc\n");
-+ pr_debug("- TX (Running): Fetching the Tx desc\n");
- break;
- case 2:
- pr_debug("- TX (Running): Waiting for end of tx\n");
-@@ -136,7 +130,7 @@ static void show_rx_process_state(unsign
- pr_debug("- RX (Running): Fetching the Rx desc\n");
- break;
- case 2:
-- pr_debug("- RX (Running):Checking for end of pkt\n");
-+ pr_debug("- RX (Running): Checking for end of pkt\n");
- break;
- case 3:
- pr_debug("- RX (Running): Waiting for Rx pkt\n");
-@@ -246,7 +240,7 @@ void stmmac_set_mac_addr(void __iomem *i
- unsigned long data;
-
- data = (addr[5] << 8) | addr[4];
-- /* For MAC Addr registers se have to set the Address Enable (AE)
-+ /* For MAC Addr registers we have to set the Address Enable (AE)
- * bit that has no effect on the High Reg 0 where the bit 31 (MO)
- * is RO.
- */
-@@ -261,9 +255,9 @@ void stmmac_set_mac(void __iomem *ioaddr
- u32 value = readl(ioaddr + MAC_CTRL_REG);
-
- if (enable)
-- value |= MAC_RNABLE_RX | MAC_ENABLE_TX;
-+ value |= MAC_ENABLE_RX | MAC_ENABLE_TX;
- else
-- value &= ~(MAC_ENABLE_TX | MAC_RNABLE_RX);
-+ value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);
-
- writel(value, ioaddr + MAC_CTRL_REG);
- }
---- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -225,7 +221,7 @@ static int enh_desc_get_rx_status(void *
- x->rx_mii++;
-
- if (unlikely(rdes0 & RDES0_CRC_ERROR)) {
-- x->rx_crc++;
-+ x->rx_crc_errors++;
- stats->rx_crc_errors++;
- }
- ret = discard_frame;
---- a/drivers/net/ethernet/stmicro/stmmac/mmc.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/mmc.h
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -115,7 +111,7 @@ static int ndesc_get_rx_status(void *dat
- stats->collisions++;
- }
- if (unlikely(rdes0 & RDES0_CRC_ERROR)) {
-- x->rx_crc++;
-+ x->rx_crc_errors++;
- stats->rx_crc_errors++;
- }
- ret = discard_frame;
---- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
-@@ -16,10 +16,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-@@ -10,10 +10,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -106,9 +102,6 @@ struct stmmac_priv {
- u32 msg_enable;
- int wolopts;
- int wol_irq;
-- struct clk *stmmac_clk;
-- struct clk *pclk;
-- struct reset_control *stmmac_rst;
- int clk_csr;
- struct timer_list eee_ctrl_timer;
- int lpi_irq;
-@@ -120,8 +113,6 @@ struct stmmac_priv {
- struct ptp_clock *ptp_clock;
- struct ptp_clock_info ptp_clock_ops;
- unsigned int default_addend;
-- struct clk *clk_ptp_ref;
-- unsigned int clk_ptp_rate;
- u32 adv_ts;
- int use_riwt;
- int irq_wake;
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -65,7 +61,7 @@ static const struct stmmac_stats stmmac_
- STMMAC_STAT(overflow_error),
- STMMAC_STAT(ipc_csum_error),
- STMMAC_STAT(rx_collision),
-- STMMAC_STAT(rx_crc),
-+ STMMAC_STAT(rx_crc_errors),
- STMMAC_STAT(dribbling_bit),
- STMMAC_STAT(rx_length),
- STMMAC_STAT(rx_mii),
-@@ -439,32 +435,14 @@ static int stmmac_ethtool_get_regs_len(s
- static void stmmac_ethtool_gregs(struct net_device *dev,
- struct ethtool_regs *regs, void *space)
- {
-- int i;
- u32 *reg_space = (u32 *) space;
-
- struct stmmac_priv *priv = netdev_priv(dev);
-
- memset(reg_space, 0x0, REG_SPACE_SIZE);
-
-- if (!(priv->plat->has_gmac || priv->plat->has_gmac4)) {
-- /* MAC registers */
-- for (i = 0; i < 12; i++)
-- reg_space[i] = readl(priv->ioaddr + (i * 4));
-- /* DMA registers */
-- for (i = 0; i < 9; i++)
-- reg_space[i + 12] =
-- readl(priv->ioaddr + (DMA_BUS_MODE + (i * 4)));
-- reg_space[22] = readl(priv->ioaddr + DMA_CUR_TX_BUF_ADDR);
-- reg_space[23] = readl(priv->ioaddr + DMA_CUR_RX_BUF_ADDR);
-- } else {
-- /* MAC registers */
-- for (i = 0; i < 55; i++)
-- reg_space[i] = readl(priv->ioaddr + (i * 4));
-- /* DMA registers */
-- for (i = 0; i < 22; i++)
-- reg_space[i + 55] =
-- readl(priv->ioaddr + (DMA_BUS_MODE + (i * 4)));
-- }
-+ priv->hw->mac->dump_regs(priv->hw, reg_space);
-+ priv->hw->dma->dump_regs(priv->ioaddr, reg_space);
- }
-
- static void
-@@ -712,7 +690,7 @@ static int stmmac_ethtool_op_set_eee(str
-
- static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv)
- {
-- unsigned long clk = clk_get_rate(priv->stmmac_clk);
-+ unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);
-
- if (!clk)
- return 0;
-@@ -722,7 +700,7 @@ static u32 stmmac_usec2riwt(u32 usec, st
-
- static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv)
- {
-- unsigned long clk = clk_get_rate(priv->stmmac_clk);
-+ unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);
-
- if (!clk)
- return 0;
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -13,10 +13,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -158,7 +154,7 @@ static void stmmac_clk_csr_set(struct st
- {
- u32 clk_rate;
-
-- clk_rate = clk_get_rate(priv->stmmac_clk);
-+ clk_rate = clk_get_rate(priv->plat->stmmac_clk);
-
- /* Platform provided default clk_csr would be assumed valid
- * for all other cases except for the below mentioned ones.
-@@ -191,7 +187,7 @@ static void print_pkt(unsigned char *buf
-
- static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
- {
-- unsigned avail;
-+ u32 avail;
-
- if (priv->dirty_tx > priv->cur_tx)
- avail = priv->dirty_tx - priv->cur_tx - 1;
-@@ -203,7 +199,7 @@ static inline u32 stmmac_tx_avail(struct
-
- static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv)
- {
-- unsigned dirty;
-+ u32 dirty;
-
- if (priv->dirty_rx <= priv->cur_rx)
- dirty = priv->cur_rx - priv->dirty_rx;
-@@ -216,7 +212,7 @@ static inline u32 stmmac_rx_dirty(struct
- /**
- * stmmac_hw_fix_mac_speed - callback for speed selection
- * @priv: driver private structure
-- * Description: on some platforms (e.g. ST), some HW system configuraton
-+ * Description: on some platforms (e.g. ST), some HW system configuration
- * registers have to be set according to the link speed negotiated.
- */
- static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
-@@ -239,7 +235,8 @@ static void stmmac_enable_eee_mode(struc
- /* Check and enter in LPI mode */
- if ((priv->dirty_tx == priv->cur_tx) &&
- (priv->tx_path_in_lpi_mode == false))
-- priv->hw->mac->set_eee_mode(priv->hw);
-+ priv->hw->mac->set_eee_mode(priv->hw,
-+ priv->plat->en_tx_lpi_clockgating);
- }
-
- /**
-@@ -421,7 +418,7 @@ static void stmmac_get_rx_hwtstamp(struc
- /**
- * stmmac_hwtstamp_ioctl - control hardware timestamping.
- * @dev: device pointer.
-- * @ifr: An IOCTL specefic structure, that can contain a pointer to
-+ * @ifr: An IOCTL specific structure, that can contain a pointer to
- * a proprietary structure used to pass information to the driver.
- * Description:
- * This function configures the MAC to enable/disable both outgoing(TX)
-@@ -621,7 +618,7 @@ static int stmmac_hwtstamp_ioctl(struct
-
- /* program Sub Second Increment reg */
- sec_inc = priv->hw->ptp->config_sub_second_increment(
-- priv->ptpaddr, priv->clk_ptp_rate,
-+ priv->ptpaddr, priv->plat->clk_ptp_rate,
- priv->plat->has_gmac4);
- temp = div_u64(1000000000ULL, sec_inc);
-
-@@ -631,7 +628,7 @@ static int stmmac_hwtstamp_ioctl(struct
- * where, freq_div_ratio = 1e9ns/sec_inc
- */
- temp = (u64)(temp << 32);
-- priv->default_addend = div_u64(temp, priv->clk_ptp_rate);
-+ priv->default_addend = div_u64(temp, priv->plat->clk_ptp_rate);
- priv->hw->ptp->config_addend(priv->ptpaddr,
- priv->default_addend);
-
-@@ -659,18 +656,6 @@ static int stmmac_init_ptp(struct stmmac
- if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
- return -EOPNOTSUPP;
-
-- /* Fall-back to main clock in case of no PTP ref is passed */
-- priv->clk_ptp_ref = devm_clk_get(priv->device, "clk_ptp_ref");
-- if (IS_ERR(priv->clk_ptp_ref)) {
-- priv->clk_ptp_rate = clk_get_rate(priv->stmmac_clk);
-- priv->clk_ptp_ref = NULL;
-- netdev_dbg(priv->dev, "PTP uses main clock\n");
-- } else {
-- clk_prepare_enable(priv->clk_ptp_ref);
-- priv->clk_ptp_rate = clk_get_rate(priv->clk_ptp_ref);
-- netdev_dbg(priv->dev, "PTP rate %d\n", priv->clk_ptp_rate);
-- }
--
- priv->adv_ts = 0;
- /* Check if adv_ts can be enabled for dwmac 4.x core */
- if (priv->plat->has_gmac4 && priv->dma_cap.atime_stamp)
-@@ -697,8 +682,8 @@ static int stmmac_init_ptp(struct stmmac
-
- static void stmmac_release_ptp(struct stmmac_priv *priv)
- {
-- if (priv->clk_ptp_ref)
-- clk_disable_unprepare(priv->clk_ptp_ref);
-+ if (priv->plat->clk_ptp_ref)
-+ clk_disable_unprepare(priv->plat->clk_ptp_ref);
- stmmac_ptp_unregister(priv);
- }
-
-@@ -719,7 +704,7 @@ static void stmmac_adjust_link(struct ne
- int new_state = 0;
- unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
-
-- if (phydev == NULL)
-+ if (!phydev)
- return;
-
- spin_lock_irqsave(&priv->lock, flags);
-@@ -746,33 +731,36 @@ static void stmmac_adjust_link(struct ne
- new_state = 1;
- switch (phydev->speed) {
- case 1000:
-- if (likely((priv->plat->has_gmac) ||
-- (priv->plat->has_gmac4)))
-+ if (priv->plat->has_gmac ||
-+ priv->plat->has_gmac4)
- ctrl &= ~priv->hw->link.port;
-- stmmac_hw_fix_mac_speed(priv);
- break;
- case 100:
-+ if (priv->plat->has_gmac ||
-+ priv->plat->has_gmac4) {
-+ ctrl |= priv->hw->link.port;
-+ ctrl |= priv->hw->link.speed;
-+ } else {
-+ ctrl &= ~priv->hw->link.port;
-+ }
-+ break;
- case 10:
-- if (likely((priv->plat->has_gmac) ||
-- (priv->plat->has_gmac4))) {
-+ if (priv->plat->has_gmac ||
-+ priv->plat->has_gmac4) {
- ctrl |= priv->hw->link.port;
-- if (phydev->speed == SPEED_100) {
-- ctrl |= priv->hw->link.speed;
-- } else {
-- ctrl &= ~(priv->hw->link.speed);
-- }
-+ ctrl &= ~(priv->hw->link.speed);
- } else {
- ctrl &= ~priv->hw->link.port;
- }
-- stmmac_hw_fix_mac_speed(priv);
- break;
- default:
- netif_warn(priv, link, priv->dev,
-- "Speed (%d) not 10/100\n",
-- phydev->speed);
-+ "broken speed: %d\n", phydev->speed);
-+ phydev->speed = SPEED_UNKNOWN;
- break;
- }
--
-+ if (phydev->speed != SPEED_UNKNOWN)
-+ stmmac_hw_fix_mac_speed(priv);
- priv->speed = phydev->speed;
- }
-
-@@ -785,8 +773,8 @@ static void stmmac_adjust_link(struct ne
- } else if (priv->oldlink) {
- new_state = 1;
- priv->oldlink = 0;
-- priv->speed = 0;
-- priv->oldduplex = -1;
-+ priv->speed = SPEED_UNKNOWN;
-+ priv->oldduplex = DUPLEX_UNKNOWN;
- }
-
- if (new_state && netif_msg_link(priv))
-@@ -848,8 +836,8 @@ static int stmmac_init_phy(struct net_de
- int interface = priv->plat->interface;
- int max_speed = priv->plat->max_speed;
- priv->oldlink = 0;
-- priv->speed = 0;
-- priv->oldduplex = -1;
-+ priv->speed = SPEED_UNKNOWN;
-+ priv->oldduplex = DUPLEX_UNKNOWN;
-
- if (priv->plat->phy_node) {
- phydev = of_phy_connect(dev, priv->plat->phy_node,
-@@ -901,9 +889,7 @@ static int stmmac_init_phy(struct net_de
- if (phydev->is_pseudo_fixed_link)
- phydev->irq = PHY_POLL;
-
-- netdev_dbg(priv->dev, "%s: attached to PHY (UID 0x%x) Link = %d\n",
-- __func__, phydev->phy_id, phydev->link);
--
-+ phy_attached_info(phydev);
- return 0;
- }
-
-@@ -1029,7 +1015,7 @@ static void stmmac_free_rx_buffers(struc
- * @dev: net device structure
- * @flags: gfp flag.
- * Description: this function initializes the DMA RX/TX descriptors
-- * and allocates the socket buffers. It suppors the chained and ring
-+ * and allocates the socket buffers. It supports the chained and ring
- * modes.
- */
- static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
-@@ -1142,13 +1128,6 @@ static void dma_free_tx_skbufs(struct st
- int i;
-
- for (i = 0; i < DMA_TX_SIZE; i++) {
-- struct dma_desc *p;
--
-- if (priv->extend_desc)
-- p = &((priv->dma_etx + i)->basic);
-- else
-- p = priv->dma_tx + i;
--
- if (priv->tx_skbuff_dma[i].buf) {
- if (priv->tx_skbuff_dma[i].map_as_page)
- dma_unmap_page(priv->device,
-@@ -1162,7 +1141,7 @@ static void dma_free_tx_skbufs(struct st
- DMA_TO_DEVICE);
- }
-
-- if (priv->tx_skbuff[i] != NULL) {
-+ if (priv->tx_skbuff[i]) {
- dev_kfree_skb_any(priv->tx_skbuff[i]);
- priv->tx_skbuff[i] = NULL;
- priv->tx_skbuff_dma[i].buf = 0;
-@@ -1286,6 +1265,28 @@ static void free_dma_desc_resources(stru
- }
-
- /**
-+ * stmmac_mac_enable_rx_queues - Enable MAC rx queues
-+ * @priv: driver private structure
-+ * Description: It is used for enabling the rx queues in the MAC
-+ */
-+static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv)
-+{
-+ int rx_count = priv->dma_cap.number_rx_queues;
-+ int queue = 0;
-+
-+ /* If GMAC does not have multiple queues, then this is not necessary*/
-+ if (rx_count == 1)
-+ return;
-+
-+ /**
-+ * If the core is synthesized with multiple rx queues / multiple
-+ * dma channels, then rx queues will be disabled by default.
-+ * For now only rx queue 0 is enabled.
-+ */
-+ priv->hw->mac->rx_queue_enable(priv->hw, queue);
-+}
-+
-+/**
- * stmmac_dma_operation_mode - HW DMA operation mode
- * @priv: driver private structure
- * Description: it is used for configuring the DMA operation mode register in
-@@ -1691,10 +1692,6 @@ static int stmmac_hw_setup(struct net_de
- /* Copy the MAC addr into the HW */
- priv->hw->mac->set_umac_addr(priv->hw, dev->dev_addr, 0);
-
-- /* If required, perform hw setup of the bus. */
-- if (priv->plat->bus_setup)
-- priv->plat->bus_setup(priv->ioaddr);
--
- /* PS and related bits will be programmed according to the speed */
- if (priv->hw->pcs) {
- int speed = priv->plat->mac_port_sel_speed;
-@@ -1711,6 +1708,10 @@ static int stmmac_hw_setup(struct net_de
- /* Initialize the MAC Core */
- priv->hw->mac->core_init(priv->hw, dev->mtu);
-
-+ /* Initialize MAC RX Queues */
-+ if (priv->hw->mac->rx_queue_enable)
-+ stmmac_mac_enable_rx_queues(priv);
-+
- ret = priv->hw->mac->rx_ipc(priv->hw);
- if (!ret) {
- netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
-@@ -1731,8 +1732,10 @@ static int stmmac_hw_setup(struct net_de
-
- if (init_ptp) {
- ret = stmmac_init_ptp(priv);
-- if (ret)
-- netdev_warn(priv->dev, "fail to init PTP.\n");
-+ if (ret == -EOPNOTSUPP)
-+ netdev_warn(priv->dev, "PTP not supported by HW\n");
-+ else if (ret)
-+ netdev_warn(priv->dev, "PTP init failed\n");
- }
-
- #ifdef CONFIG_DEBUG_FS
-@@ -1746,11 +1749,6 @@ static int stmmac_hw_setup(struct net_de
- priv->hw->dma->start_tx(priv->ioaddr);
- priv->hw->dma->start_rx(priv->ioaddr);
-
-- /* Dump DMA/MAC registers */
-- if (netif_msg_hw(priv)) {
-- priv->hw->mac->dump_regs(priv->hw);
-- priv->hw->dma->dump_regs(priv->ioaddr);
-- }
- priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
-
- if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
-@@ -2547,7 +2545,7 @@ static int stmmac_rx(struct stmmac_priv
- if (unlikely(status == discard_frame)) {
- priv->dev->stats.rx_errors++;
- if (priv->hwts_rx_en && !priv->extend_desc) {
-- /* DESC2 & DESC3 will be overwitten by device
-+ /* DESC2 & DESC3 will be overwritten by device
- * with timestamp value, hence reinitialize
- * them in stmmac_rx_refill() function so that
- * device can reuse it.
-@@ -2570,7 +2568,7 @@ static int stmmac_rx(struct stmmac_priv
-
- frame_len = priv->hw->desc->get_rx_frame_len(p, coe);
-
-- /* If frame length is greather than skb buffer size
-+ /* If frame length is greater than skb buffer size
- * (preallocated during init) then the packet is
- * ignored
- */
-@@ -2790,7 +2788,7 @@ static netdev_features_t stmmac_fix_feat
- /* Some GMAC devices have a bugged Jumbo frame support that
- * needs to have the Tx COE disabled for oversized frames
- * (due to limited buffer sizes). In this case we disable
-- * the TX csum insertionin the TDES and not use SF.
-+ * the TX csum insertion in the TDES and not use SF.
- */
- if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN))
- features &= ~NETIF_F_CSUM_MASK;
-@@ -2936,9 +2934,7 @@ static void sysfs_display_ring(void *hea
- struct dma_desc *p = (struct dma_desc *)head;
-
- for (i = 0; i < size; i++) {
-- u64 x;
- if (extend_desc) {
-- x = *(u64 *) ep;
- seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
- i, (unsigned int)virt_to_phys(ep),
- le32_to_cpu(ep->basic.des0),
-@@ -2947,7 +2943,6 @@ static void sysfs_display_ring(void *hea
- le32_to_cpu(ep->basic.des3));
- ep++;
- } else {
-- x = *(u64 *) p;
- seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
- i, (unsigned int)virt_to_phys(ep),
- le32_to_cpu(p->des0), le32_to_cpu(p->des1),
-@@ -3017,7 +3012,7 @@ static int stmmac_sysfs_dma_cap_read(str
- (priv->dma_cap.hash_filter) ? "Y" : "N");
- seq_printf(seq, "\tMultiple MAC address registers: %s\n",
- (priv->dma_cap.multi_addr) ? "Y" : "N");
-- seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfatces): %s\n",
-+ seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfaces): %s\n",
- (priv->dma_cap.pcs) ? "Y" : "N");
- seq_printf(seq, "\tSMA (MDIO) Interface: %s\n",
- (priv->dma_cap.sma_mdio) ? "Y" : "N");
-@@ -3293,44 +3288,8 @@ int stmmac_dvr_probe(struct device *devi
- if ((phyaddr >= 0) && (phyaddr <= 31))
- priv->plat->phy_addr = phyaddr;
-
-- priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME);
-- if (IS_ERR(priv->stmmac_clk)) {
-- netdev_warn(priv->dev, "%s: warning: cannot get CSR clock\n",
-- __func__);
-- /* If failed to obtain stmmac_clk and specific clk_csr value
-- * is NOT passed from the platform, probe fail.
-- */
-- if (!priv->plat->clk_csr) {
-- ret = PTR_ERR(priv->stmmac_clk);
-- goto error_clk_get;
-- } else {
-- priv->stmmac_clk = NULL;
-- }
-- }
-- clk_prepare_enable(priv->stmmac_clk);
--
-- priv->pclk = devm_clk_get(priv->device, "pclk");
-- if (IS_ERR(priv->pclk)) {
-- if (PTR_ERR(priv->pclk) == -EPROBE_DEFER) {
-- ret = -EPROBE_DEFER;
-- goto error_pclk_get;
-- }
-- priv->pclk = NULL;
-- }
-- clk_prepare_enable(priv->pclk);
--
-- priv->stmmac_rst = devm_reset_control_get(priv->device,
-- STMMAC_RESOURCE_NAME);
-- if (IS_ERR(priv->stmmac_rst)) {
-- if (PTR_ERR(priv->stmmac_rst) == -EPROBE_DEFER) {
-- ret = -EPROBE_DEFER;
-- goto error_hw_init;
-- }
-- dev_info(priv->device, "no reset control found\n");
-- priv->stmmac_rst = NULL;
-- }
-- if (priv->stmmac_rst)
-- reset_control_deassert(priv->stmmac_rst);
-+ if (priv->plat->stmmac_rst)
-+ reset_control_deassert(priv->plat->stmmac_rst);
-
- /* Init MAC and get the capabilities */
- ret = stmmac_hw_init(priv);
-@@ -3416,10 +3375,6 @@ error_netdev_register:
- error_mdio_register:
- netif_napi_del(&priv->napi);
- error_hw_init:
-- clk_disable_unprepare(priv->pclk);
--error_pclk_get:
-- clk_disable_unprepare(priv->stmmac_clk);
--error_clk_get:
- free_netdev(ndev);
-
- return ret;
-@@ -3445,10 +3400,10 @@ int stmmac_dvr_remove(struct device *dev
- stmmac_set_mac(priv->ioaddr, false);
- netif_carrier_off(ndev);
- unregister_netdev(ndev);
-- if (priv->stmmac_rst)
-- reset_control_assert(priv->stmmac_rst);
-- clk_disable_unprepare(priv->pclk);
-- clk_disable_unprepare(priv->stmmac_clk);
-+ if (priv->plat->stmmac_rst)
-+ reset_control_assert(priv->plat->stmmac_rst);
-+ clk_disable_unprepare(priv->plat->pclk);
-+ clk_disable_unprepare(priv->plat->stmmac_clk);
- if (priv->hw->pcs != STMMAC_PCS_RGMII &&
- priv->hw->pcs != STMMAC_PCS_TBI &&
- priv->hw->pcs != STMMAC_PCS_RTBI)
-@@ -3497,14 +3452,14 @@ int stmmac_suspend(struct device *dev)
- stmmac_set_mac(priv->ioaddr, false);
- pinctrl_pm_select_sleep_state(priv->device);
- /* Disable clock in case of PWM is off */
-- clk_disable(priv->pclk);
-- clk_disable(priv->stmmac_clk);
-+ clk_disable(priv->plat->pclk);
-+ clk_disable(priv->plat->stmmac_clk);
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
- priv->oldlink = 0;
-- priv->speed = 0;
-- priv->oldduplex = -1;
-+ priv->speed = SPEED_UNKNOWN;
-+ priv->oldduplex = DUPLEX_UNKNOWN;
- return 0;
- }
- EXPORT_SYMBOL_GPL(stmmac_suspend);
-@@ -3537,9 +3492,9 @@ int stmmac_resume(struct device *dev)
- priv->irq_wake = 0;
- } else {
- pinctrl_pm_select_default_state(priv->device);
-- /* enable the clk prevously disabled */
-- clk_enable(priv->stmmac_clk);
-- clk_enable(priv->pclk);
-+ /* enable the clk previously disabled */
-+ clk_enable(priv->plat->stmmac_clk);
-+ clk_enable(priv->plat->pclk);
- /* reset the phy so that it's ready */
- if (priv->mii)
- stmmac_mdio_reset(priv->mii);
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
-@@ -13,10 +13,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -24,13 +20,14 @@
- Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- *******************************************************************************/
-
-+#include <linux/io.h>
-+#include <linux/iopoll.h>
- #include <linux/mii.h>
--#include <linux/phy.h>
--#include <linux/slab.h>
- #include <linux/of.h>
- #include <linux/of_gpio.h>
- #include <linux/of_mdio.h>
--#include <asm/io.h>
-+#include <linux/phy.h>
-+#include <linux/slab.h>
-
- #include "stmmac.h"
-
-@@ -42,22 +39,6 @@
- #define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
- #define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
-
--static int stmmac_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_addr)
--{
-- unsigned long curr;
-- unsigned long finish = jiffies + 3 * HZ;
--
-- do {
-- curr = jiffies;
-- if (readl(ioaddr + mii_addr) & MII_BUSY)
-- cpu_relax();
-- else
-- return 0;
-- } while (!time_after_eq(curr, finish));
--
-- return -EBUSY;
--}
--
- /**
- * stmmac_mdio_read
- * @bus: points to the mii_bus structure
-@@ -74,7 +55,7 @@ static int stmmac_mdio_read(struct mii_b
- struct stmmac_priv *priv = netdev_priv(ndev);
- unsigned int mii_address = priv->hw->mii.addr;
- unsigned int mii_data = priv->hw->mii.data;
--
-+ u32 v;
- int data;
- u32 value = MII_BUSY;
-
-@@ -86,12 +67,14 @@ static int stmmac_mdio_read(struct mii_b
- if (priv->plat->has_gmac4)
- value |= MII_GMAC4_READ;
-
-- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
-+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
-+ 100, 10000))
- return -EBUSY;
-
- writel(value, priv->ioaddr + mii_address);
-
-- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
-+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
-+ 100, 10000))
- return -EBUSY;
-
- /* Read the data from the MII data register */
-@@ -115,7 +98,7 @@ static int stmmac_mdio_write(struct mii_
- struct stmmac_priv *priv = netdev_priv(ndev);
- unsigned int mii_address = priv->hw->mii.addr;
- unsigned int mii_data = priv->hw->mii.data;
--
-+ u32 v;
- u32 value = MII_BUSY;
-
- value |= (phyaddr << priv->hw->mii.addr_shift)
-@@ -130,7 +113,8 @@ static int stmmac_mdio_write(struct mii_
- value |= MII_WRITE;
-
- /* Wait until any existing MII operation is complete */
-- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
-+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
-+ 100, 10000))
- return -EBUSY;
-
- /* Set the MII address register to write */
-@@ -138,7 +122,8 @@ static int stmmac_mdio_write(struct mii_
- writel(value, priv->ioaddr + mii_address);
-
- /* Wait until any existing MII operation is complete */
-- return stmmac_mdio_busy_wait(priv->ioaddr, mii_address);
-+ return readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
-+ 100, 10000);
- }
-
- /**
-@@ -156,9 +141,9 @@ int stmmac_mdio_reset(struct mii_bus *bu
-
- #ifdef CONFIG_OF
- if (priv->device->of_node) {
--
- if (data->reset_gpio < 0) {
- struct device_node *np = priv->device->of_node;
-+
- if (!np)
- return 0;
-
-@@ -198,7 +183,7 @@ int stmmac_mdio_reset(struct mii_bus *bu
-
- /* This is a workaround for problems with the STE101P PHY.
- * It doesn't complete its reset until at least one clock cycle
-- * on MDC, so perform a dummy mdio read. To be upadted for GMAC4
-+ * on MDC, so perform a dummy mdio read. To be updated for GMAC4
- * if needed.
- */
- if (!priv->plat->has_gmac4)
-@@ -225,7 +210,7 @@ int stmmac_mdio_register(struct net_devi
- return 0;
-
- new_bus = mdiobus_alloc();
-- if (new_bus == NULL)
-+ if (!new_bus)
- return -ENOMEM;
-
- if (mdio_bus_data->irqs)
-@@ -262,49 +247,48 @@ int stmmac_mdio_register(struct net_devi
- found = 0;
- for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
- struct phy_device *phydev = mdiobus_get_phy(new_bus, addr);
-- if (phydev) {
-- int act = 0;
-- char irq_num[4];
-- char *irq_str;
--
-- /*
-- * If an IRQ was provided to be assigned after
-- * the bus probe, do it here.
-- */
-- if ((mdio_bus_data->irqs == NULL) &&
-- (mdio_bus_data->probed_phy_irq > 0)) {
-- new_bus->irq[addr] =
-- mdio_bus_data->probed_phy_irq;
-- phydev->irq = mdio_bus_data->probed_phy_irq;
-- }
--
-- /*
-- * If we're going to bind the MAC to this PHY bus,
-- * and no PHY number was provided to the MAC,
-- * use the one probed here.
-- */
-- if (priv->plat->phy_addr == -1)
-- priv->plat->phy_addr = addr;
--
-- act = (priv->plat->phy_addr == addr);
-- switch (phydev->irq) {
-- case PHY_POLL:
-- irq_str = "POLL";
-- break;
-- case PHY_IGNORE_INTERRUPT:
-- irq_str = "IGNORE";
-- break;
-- default:
-- sprintf(irq_num, "%d", phydev->irq);
-- irq_str = irq_num;
-- break;
-- }
-- netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
-- phydev->phy_id, addr,
-- irq_str, phydev_name(phydev),
-- act ? " active" : "");
-- found = 1;
-+ int act = 0;
-+ char irq_num[4];
-+ char *irq_str;
-+
-+ if (!phydev)
-+ continue;
-+
-+ /*
-+ * If an IRQ was provided to be assigned after
-+ * the bus probe, do it here.
-+ */
-+ if (!mdio_bus_data->irqs &&
-+ (mdio_bus_data->probed_phy_irq > 0)) {
-+ new_bus->irq[addr] = mdio_bus_data->probed_phy_irq;
-+ phydev->irq = mdio_bus_data->probed_phy_irq;
-+ }
-+
-+ /*
-+ * If we're going to bind the MAC to this PHY bus,
-+ * and no PHY number was provided to the MAC,
-+ * use the one probed here.
-+ */
-+ if (priv->plat->phy_addr == -1)
-+ priv->plat->phy_addr = addr;
-+
-+ act = (priv->plat->phy_addr == addr);
-+ switch (phydev->irq) {
-+ case PHY_POLL:
-+ irq_str = "POLL";
-+ break;
-+ case PHY_IGNORE_INTERRUPT:
-+ irq_str = "IGNORE";
-+ break;
-+ default:
-+ sprintf(irq_num, "%d", phydev->irq);
-+ irq_str = irq_num;
-+ break;
- }
-+ netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
-+ phydev->phy_id, addr, irq_str, phydev_name(phydev),
-+ act ? " active" : "");
-+ found = 1;
- }
-
- if (!found && !mdio_node) {
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
-@@ -121,7 +117,6 @@ static struct stmmac_axi *stmmac_axi_set
- axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en");
- axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm");
- axi->axi_kbbe = of_property_read_bool(np, "snps,axi_kbbe");
-- axi->axi_axi_all = of_property_read_bool(np, "snps,axi_all");
- axi->axi_fb = of_property_read_bool(np, "snps,axi_fb");
- axi->axi_mb = of_property_read_bool(np, "snps,axi_mb");
- axi->axi_rb = of_property_read_bool(np, "snps,axi_rb");
-@@ -181,10 +176,19 @@ static int stmmac_dt_phy(struct plat_stm
- mdio = false;
- }
-
-- /* If snps,dwmac-mdio is passed from DT, always register the MDIO */
-- for_each_child_of_node(np, plat->mdio_node) {
-- if (of_device_is_compatible(plat->mdio_node, "snps,dwmac-mdio"))
-- break;
-+ /* exception for dwmac-dwc-qos-eth glue logic */
-+ if (of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
-+ plat->mdio_node = of_get_child_by_name(np, "mdio");
-+ } else {
-+ /**
-+ * If snps,dwmac-mdio is passed from DT, always register
-+ * the MDIO
-+ */
-+ for_each_child_of_node(np, plat->mdio_node) {
-+ if (of_device_is_compatible(plat->mdio_node,
-+ "snps,dwmac-mdio"))
-+ break;
-+ }
- }
-
- if (plat->mdio_node) {
-@@ -249,6 +253,9 @@ stmmac_probe_config_dt(struct platform_d
- plat->force_sf_dma_mode =
- of_property_read_bool(np, "snps,force_sf_dma_mode");
-
-+ plat->en_tx_lpi_clockgating =
-+ of_property_read_bool(np, "snps,en-tx-lpi-clockgating");
-+
- /* Set the maxmtu to a default of JUMBO_LEN in case the
- * parameter is not present in the device tree.
- */
-@@ -333,7 +340,54 @@ stmmac_probe_config_dt(struct platform_d
-
- plat->axi = stmmac_axi_setup(pdev);
-
-+ /* clock setup */
-+ plat->stmmac_clk = devm_clk_get(&pdev->dev,
-+ STMMAC_RESOURCE_NAME);
-+ if (IS_ERR(plat->stmmac_clk)) {
-+ dev_warn(&pdev->dev, "Cannot get CSR clock\n");
-+ plat->stmmac_clk = NULL;
-+ }
-+ clk_prepare_enable(plat->stmmac_clk);
-+
-+ plat->pclk = devm_clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(plat->pclk)) {
-+ if (PTR_ERR(plat->pclk) == -EPROBE_DEFER)
-+ goto error_pclk_get;
-+
-+ plat->pclk = NULL;
-+ }
-+ clk_prepare_enable(plat->pclk);
-+
-+ /* Fall-back to main clock in case of no PTP ref is passed */
-+ plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "clk_ptp_ref");
-+ if (IS_ERR(plat->clk_ptp_ref)) {
-+ plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk);
-+ plat->clk_ptp_ref = NULL;
-+ dev_warn(&pdev->dev, "PTP uses main clock\n");
-+ } else {
-+ clk_prepare_enable(plat->clk_ptp_ref);
-+ plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref);
-+ dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate);
-+ }
-+
-+ plat->stmmac_rst = devm_reset_control_get(&pdev->dev,
-+ STMMAC_RESOURCE_NAME);
-+ if (IS_ERR(plat->stmmac_rst)) {
-+ if (PTR_ERR(plat->stmmac_rst) == -EPROBE_DEFER)
-+ goto error_hw_init;
-+
-+ dev_info(&pdev->dev, "no reset control found\n");
-+ plat->stmmac_rst = NULL;
-+ }
-+
- return plat;
-+
-+error_hw_init:
-+ clk_disable_unprepare(plat->pclk);
-+error_pclk_get:
-+ clk_disable_unprepare(plat->stmmac_clk);
-+
-+ return ERR_PTR(-EPROBE_DEFER);
- }
-
- /**
-@@ -357,7 +411,7 @@ void stmmac_remove_config_dt(struct plat
- struct plat_stmmacenet_data *
- stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
- {
-- return ERR_PTR(-ENOSYS);
-+ return ERR_PTR(-EINVAL);
- }
-
- void stmmac_remove_config_dt(struct platform_device *pdev,
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h
-@@ -12,10 +12,6 @@
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
-- You should have received a copy of the GNU General Public License along with
-- this program; if not, write to the Free Software Foundation, Inc.,
-- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
--
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
---- a/include/linux/stmmac.h
-+++ b/include/linux/stmmac.h
-@@ -103,7 +103,6 @@ struct stmmac_axi {
- u32 axi_wr_osr_lmt;
- u32 axi_rd_osr_lmt;
- bool axi_kbbe;
-- bool axi_axi_all;
- u32 axi_blen[AXI_BLEN];
- bool axi_fb;
- bool axi_mb;
-@@ -135,13 +134,18 @@ struct plat_stmmacenet_data {
- int tx_fifo_size;
- int rx_fifo_size;
- void (*fix_mac_speed)(void *priv, unsigned int speed);
-- void (*bus_setup)(void __iomem *ioaddr);
- int (*init)(struct platform_device *pdev, void *priv);
- void (*exit)(struct platform_device *pdev, void *priv);
- void *bsp_priv;
-+ struct clk *stmmac_clk;
-+ struct clk *pclk;
-+ struct clk *clk_ptp_ref;
-+ unsigned int clk_ptp_rate;
-+ struct reset_control *stmmac_rst;
- struct stmmac_axi *axi;
- int has_gmac4;
- bool tso_en;
- int mac_port_sel_speed;
-+ bool en_tx_lpi_clockgating;
- };
- #endif
diff --git a/target/linux/sunxi/patches-4.9/0052-stmmac-form-4-12.patch b/target/linux/sunxi/patches-4.9/0052-stmmac-form-4-12.patch
deleted file mode 100644
index a1b018186f..0000000000
--- a/target/linux/sunxi/patches-4.9/0052-stmmac-form-4-12.patch
+++ /dev/null
@@ -1,5904 +0,0 @@
---- a/Documentation/devicetree/bindings/net/stmmac.txt
-+++ b/Documentation/devicetree/bindings/net/stmmac.txt
-@@ -7,9 +7,12 @@ Required properties:
- - interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- - interrupts: Should contain the STMMAC interrupts
--- interrupt-names: Should contain the interrupt names "macirq"
-- "eth_wake_irq" if this interrupt is supported in the "interrupts"
-- property
-+- interrupt-names: Should contain a list of interrupt names corresponding to
-+ the interrupts in the interrupts property, if available.
-+ Valid interrupt names are:
-+ - "macirq" (combined signal for various interrupt events)
-+ - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection)
-+ - "eth_lpi" (the interrupt that occurs when Tx or Rx enters/exits LPI state)
- - phy-mode: See ethernet.txt file in the same directory.
- - snps,reset-gpio gpio number for phy reset.
- - snps,reset-active-low boolean flag to indicate if phy reset is active low.
-@@ -28,9 +31,9 @@ Optional properties:
- clocks may be specified in derived bindings.
- - clock-names: One name for each entry in the clocks property, the
- first one should be "stmmaceth" and the second one should be "pclk".
--- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
-- available this clock is used for programming the Timestamp Addend Register.
-- If not passed then the system clock will be used and this is fine on some
-+- ptp_ref: this is the PTP reference clock; in case of the PTP is available
-+ this clock is used for programming the Timestamp Addend Register. If not
-+ passed then the system clock will be used and this is fine on some
- platforms.
- - tx-fifo-depth: See ethernet.txt file in the same directory
- - rx-fifo-depth: See ethernet.txt file in the same directory
-@@ -72,7 +75,45 @@ Optional properties:
- - snps,mb: mixed-burst
- - snps,rb: rebuild INCRx Burst
- - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
--
-+- Multiple RX Queues parameters: below the list of all the parameters to
-+ configure the multiple RX queues:
-+ - snps,rx-queues-to-use: number of RX queues to be used in the driver
-+ - Choose one of these RX scheduling algorithms:
-+ - snps,rx-sched-sp: Strict priority
-+ - snps,rx-sched-wsp: Weighted Strict priority
-+ - For each RX queue
-+ - Choose one of these modes:
-+ - snps,dcb-algorithm: Queue to be enabled as DCB
-+ - snps,avb-algorithm: Queue to be enabled as AVB
-+ - snps,map-to-dma-channel: Channel to map
-+ - Specifiy specific packet routing:
-+ - snps,route-avcp: AV Untagged Control packets
-+ - snps,route-ptp: PTP Packets
-+ - snps,route-dcbcp: DCB Control Packets
-+ - snps,route-up: Untagged Packets
-+ - snps,route-multi-broad: Multicast & Broadcast Packets
-+ - snps,priority: RX queue priority (Range: 0x0 to 0xF)
-+- Multiple TX Queues parameters: below the list of all the parameters to
-+ configure the multiple TX queues:
-+ - snps,tx-queues-to-use: number of TX queues to be used in the driver
-+ - Choose one of these TX scheduling algorithms:
-+ - snps,tx-sched-wrr: Weighted Round Robin
-+ - snps,tx-sched-wfq: Weighted Fair Queuing
-+ - snps,tx-sched-dwrr: Deficit Weighted Round Robin
-+ - snps,tx-sched-sp: Strict priority
-+ - For each TX queue
-+ - snps,weight: TX queue weight (if using a DCB weight algorithm)
-+ - Choose one of these modes:
-+ - snps,dcb-algorithm: TX queue will be working in DCB
-+ - snps,avb-algorithm: TX queue will be working in AVB
-+ [Attention] Queue 0 is reserved for legacy traffic
-+ and so no AVB is available in this queue.
-+ - Configure Credit Base Shaper (if AVB Mode selected):
-+ - snps,send_slope: enable Low Power Interface
-+ - snps,idle_slope: unlock on WoL
-+ - snps,high_credit: max write outstanding req. limit
-+ - snps,low_credit: max read outstanding req. limit
-+ - snps,priority: TX queue priority (Range: 0x0 to 0xF)
- Examples:
-
- stmmac_axi_setup: stmmac-axi-config {
-@@ -81,12 +122,41 @@ Examples:
- snps,blen = <256 128 64 32 0 0 0>;
- };
-
-+ mtl_rx_setup: rx-queues-config {
-+ snps,rx-queues-to-use = <1>;
-+ snps,rx-sched-sp;
-+ queue0 {
-+ snps,dcb-algorithm;
-+ snps,map-to-dma-channel = <0x0>;
-+ snps,priority = <0x0>;
-+ };
-+ };
-+
-+ mtl_tx_setup: tx-queues-config {
-+ snps,tx-queues-to-use = <2>;
-+ snps,tx-sched-wrr;
-+ queue0 {
-+ snps,weight = <0x10>;
-+ snps,dcb-algorithm;
-+ snps,priority = <0x0>;
-+ };
-+
-+ queue1 {
-+ snps,avb-algorithm;
-+ snps,send_slope = <0x1000>;
-+ snps,idle_slope = <0x1000>;
-+ snps,high_credit = <0x3E800>;
-+ snps,low_credit = <0xFFC18000>;
-+ snps,priority = <0x1>;
-+ };
-+ };
-+
- gmac0: ethernet@e0800000 {
- compatible = "st,spear600-gmac";
- reg = <0xe0800000 0x8000>;
- interrupt-parent = <&vic1>;
-- interrupts = <24 23>;
-- interrupt-names = "macirq", "eth_wake_irq";
-+ interrupts = <24 23 22>;
-+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
- mac-address = [000000000000]; /* Filled in by U-Boot */
- max-frame-size = <3800>;
- phy-mode = "gmii";
-@@ -104,4 +174,6 @@ Examples:
- phy1: ethernet-phy@0 {
- };
- };
-+ snps,mtl-rx-config = <&mtl_rx_setup>;
-+ snps,mtl-tx-config = <&mtl_tx_setup>;
- };
---- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
-@@ -37,6 +37,7 @@
- #define TSE_PCS_CONTROL_AN_EN_MASK BIT(12)
- #define TSE_PCS_CONTROL_REG 0x00
- #define TSE_PCS_CONTROL_RESTART_AN_MASK BIT(9)
-+#define TSE_PCS_CTRL_AUTONEG_SGMII 0x1140
- #define TSE_PCS_IF_MODE_REG 0x28
- #define TSE_PCS_LINK_TIMER_0_REG 0x24
- #define TSE_PCS_LINK_TIMER_1_REG 0x26
-@@ -65,6 +66,7 @@
- #define TSE_PCS_SW_RESET_TIMEOUT 100
- #define TSE_PCS_USE_SGMII_AN_MASK BIT(1)
- #define TSE_PCS_USE_SGMII_ENA BIT(0)
-+#define TSE_PCS_IF_USE_SGMII 0x03
-
- #define SGMII_ADAPTER_CTRL_REG 0x00
- #define SGMII_ADAPTER_DISABLE 0x0001
-@@ -101,7 +103,9 @@ int tse_pcs_init(void __iomem *base, str
- {
- int ret = 0;
-
-- writew(TSE_PCS_USE_SGMII_ENA, base + TSE_PCS_IF_MODE_REG);
-+ writew(TSE_PCS_IF_USE_SGMII, base + TSE_PCS_IF_MODE_REG);
-+
-+ writew(TSE_PCS_CTRL_AUTONEG_SGMII, base + TSE_PCS_CONTROL_REG);
-
- writew(TSE_PCS_SGMII_LINK_TIMER_0, base + TSE_PCS_LINK_TIMER_0_REG);
- writew(TSE_PCS_SGMII_LINK_TIMER_1, base + TSE_PCS_LINK_TIMER_1_REG);
---- a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
-@@ -26,12 +26,15 @@
-
- static int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum)
- {
-- struct stmmac_priv *priv = (struct stmmac_priv *)p;
-- unsigned int entry = priv->cur_tx;
-- struct dma_desc *desc = priv->dma_tx + entry;
-+ struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)p;
- unsigned int nopaged_len = skb_headlen(skb);
-+ struct stmmac_priv *priv = tx_q->priv_data;
-+ unsigned int entry = tx_q->cur_tx;
- unsigned int bmax, des2;
- unsigned int i = 1, len;
-+ struct dma_desc *desc;
-+
-+ desc = tx_q->dma_tx + entry;
-
- if (priv->plat->enh_desc)
- bmax = BUF_SIZE_8KiB;
-@@ -45,16 +48,16 @@ static int stmmac_jumbo_frm(void *p, str
- desc->des2 = cpu_to_le32(des2);
- if (dma_mapping_error(priv->device, des2))
- return -1;
-- priv->tx_skbuff_dma[entry].buf = des2;
-- priv->tx_skbuff_dma[entry].len = bmax;
-+ tx_q->tx_skbuff_dma[entry].buf = des2;
-+ tx_q->tx_skbuff_dma[entry].len = bmax;
- /* do not close the descriptor and do not set own bit */
- priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum, STMMAC_CHAIN_MODE,
-- 0, false);
-+ 0, false, skb->len);
-
- while (len != 0) {
-- priv->tx_skbuff[entry] = NULL;
-+ tx_q->tx_skbuff[entry] = NULL;
- entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
-- desc = priv->dma_tx + entry;
-+ desc = tx_q->dma_tx + entry;
-
- if (len > bmax) {
- des2 = dma_map_single(priv->device,
-@@ -63,11 +66,11 @@ static int stmmac_jumbo_frm(void *p, str
- desc->des2 = cpu_to_le32(des2);
- if (dma_mapping_error(priv->device, des2))
- return -1;
-- priv->tx_skbuff_dma[entry].buf = des2;
-- priv->tx_skbuff_dma[entry].len = bmax;
-+ tx_q->tx_skbuff_dma[entry].buf = des2;
-+ tx_q->tx_skbuff_dma[entry].len = bmax;
- priv->hw->desc->prepare_tx_desc(desc, 0, bmax, csum,
- STMMAC_CHAIN_MODE, 1,
-- false);
-+ false, skb->len);
- len -= bmax;
- i++;
- } else {
-@@ -77,17 +80,17 @@ static int stmmac_jumbo_frm(void *p, str
- desc->des2 = cpu_to_le32(des2);
- if (dma_mapping_error(priv->device, des2))
- return -1;
-- priv->tx_skbuff_dma[entry].buf = des2;
-- priv->tx_skbuff_dma[entry].len = len;
-+ tx_q->tx_skbuff_dma[entry].buf = des2;
-+ tx_q->tx_skbuff_dma[entry].len = len;
- /* last descriptor can be set now */
- priv->hw->desc->prepare_tx_desc(desc, 0, len, csum,
- STMMAC_CHAIN_MODE, 1,
-- true);
-+ true, skb->len);
- len = 0;
- }
- }
-
-- priv->cur_tx = entry;
-+ tx_q->cur_tx = entry;
-
- return entry;
- }
-@@ -136,32 +139,34 @@ static void stmmac_init_dma_chain(void *
-
- static void stmmac_refill_desc3(void *priv_ptr, struct dma_desc *p)
- {
-- struct stmmac_priv *priv = (struct stmmac_priv *)priv_ptr;
-+ struct stmmac_rx_queue *rx_q = (struct stmmac_rx_queue *)priv_ptr;
-+ struct stmmac_priv *priv = rx_q->priv_data;
-
- if (priv->hwts_rx_en && !priv->extend_desc)
- /* NOTE: Device will overwrite des3 with timestamp value if
- * 1588-2002 time stamping is enabled, hence reinitialize it
- * to keep explicit chaining in the descriptor.
- */
-- p->des3 = cpu_to_le32((unsigned int)(priv->dma_rx_phy +
-- (((priv->dirty_rx) + 1) %
-+ p->des3 = cpu_to_le32((unsigned int)(rx_q->dma_rx_phy +
-+ (((rx_q->dirty_rx) + 1) %
- DMA_RX_SIZE) *
- sizeof(struct dma_desc)));
- }
-
- static void stmmac_clean_desc3(void *priv_ptr, struct dma_desc *p)
- {
-- struct stmmac_priv *priv = (struct stmmac_priv *)priv_ptr;
-- unsigned int entry = priv->dirty_tx;
-+ struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)priv_ptr;
-+ struct stmmac_priv *priv = tx_q->priv_data;
-+ unsigned int entry = tx_q->dirty_tx;
-
-- if (priv->tx_skbuff_dma[entry].last_segment && !priv->extend_desc &&
-+ if (tx_q->tx_skbuff_dma[entry].last_segment && !priv->extend_desc &&
- priv->hwts_tx_en)
- /* NOTE: Device will overwrite des3 with timestamp value if
- * 1588-2002 time stamping is enabled, hence reinitialize it
- * to keep explicit chaining in the descriptor.
- */
-- p->des3 = cpu_to_le32((unsigned int)((priv->dma_tx_phy +
-- ((priv->dirty_tx + 1) % DMA_TX_SIZE))
-+ p->des3 = cpu_to_le32((unsigned int)((tx_q->dma_tx_phy +
-+ ((tx_q->dirty_tx + 1) % DMA_TX_SIZE))
- * sizeof(struct dma_desc)));
- }
-
---- a/drivers/net/ethernet/stmicro/stmmac/common.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
-@@ -246,6 +246,15 @@ struct stmmac_extra_stats {
- #define STMMAC_TX_MAX_FRAMES 256
- #define STMMAC_TX_FRAMES 64
-
-+/* Packets types */
-+enum packets_types {
-+ PACKET_AVCPQ = 0x1, /* AV Untagged Control packets */
-+ PACKET_PTPQ = 0x2, /* PTP Packets */
-+ PACKET_DCBCPQ = 0x3, /* DCB Control Packets */
-+ PACKET_UPQ = 0x4, /* Untagged Packets */
-+ PACKET_MCBCQ = 0x5, /* Multicast & Broadcast Packets */
-+};
-+
- /* Rx IPC status */
- enum rx_frame_status {
- good_frame = 0x0,
-@@ -324,6 +333,9 @@ struct dma_features {
- unsigned int number_tx_queues;
- /* Alternate (enhanced) DESC mode */
- unsigned int enh_desc;
-+ /* TX and RX FIFO sizes */
-+ unsigned int tx_fifo_size;
-+ unsigned int rx_fifo_size;
- };
-
- /* GMAC TX FIFO is 8K, Rx FIFO is 16K */
-@@ -361,7 +373,7 @@ struct stmmac_desc_ops {
- /* Invoked by the xmit function to prepare the tx descriptor */
- void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len,
- bool csum_flag, int mode, bool tx_own,
-- bool ls);
-+ bool ls, unsigned int tot_pkt_len);
- void (*prepare_tso_tx_desc)(struct dma_desc *p, int is_fs, int len1,
- int len2, bool tx_own, bool ls,
- unsigned int tcphdrlen,
-@@ -413,6 +425,14 @@ struct stmmac_dma_ops {
- int (*reset)(void __iomem *ioaddr);
- void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg,
- u32 dma_tx, u32 dma_rx, int atds);
-+ void (*init_chan)(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg, u32 chan);
-+ void (*init_rx_chan)(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_rx_phy, u32 chan);
-+ void (*init_tx_chan)(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_tx_phy, u32 chan);
- /* Configure the AXI Bus Mode Register */
- void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
- /* Dump DMA registers */
-@@ -421,25 +441,28 @@ struct stmmac_dma_ops {
- * An invalid value enables the store-and-forward mode */
- void (*dma_mode)(void __iomem *ioaddr, int txmode, int rxmode,
- int rxfifosz);
-+ void (*dma_rx_mode)(void __iomem *ioaddr, int mode, u32 channel,
-+ int fifosz);
-+ void (*dma_tx_mode)(void __iomem *ioaddr, int mode, u32 channel);
- /* To track extra statistic (if supported) */
- void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x,
- void __iomem *ioaddr);
- void (*enable_dma_transmission) (void __iomem *ioaddr);
-- void (*enable_dma_irq) (void __iomem *ioaddr);
-- void (*disable_dma_irq) (void __iomem *ioaddr);
-- void (*start_tx) (void __iomem *ioaddr);
-- void (*stop_tx) (void __iomem *ioaddr);
-- void (*start_rx) (void __iomem *ioaddr);
-- void (*stop_rx) (void __iomem *ioaddr);
-+ void (*enable_dma_irq)(void __iomem *ioaddr, u32 chan);
-+ void (*disable_dma_irq)(void __iomem *ioaddr, u32 chan);
-+ void (*start_tx)(void __iomem *ioaddr, u32 chan);
-+ void (*stop_tx)(void __iomem *ioaddr, u32 chan);
-+ void (*start_rx)(void __iomem *ioaddr, u32 chan);
-+ void (*stop_rx)(void __iomem *ioaddr, u32 chan);
- int (*dma_interrupt) (void __iomem *ioaddr,
-- struct stmmac_extra_stats *x);
-+ struct stmmac_extra_stats *x, u32 chan);
- /* If supported then get the optional core features */
- void (*get_hw_feature)(void __iomem *ioaddr,
- struct dma_features *dma_cap);
- /* Program the HW RX Watchdog */
-- void (*rx_watchdog) (void __iomem *ioaddr, u32 riwt);
-- void (*set_tx_ring_len)(void __iomem *ioaddr, u32 len);
-- void (*set_rx_ring_len)(void __iomem *ioaddr, u32 len);
-+ void (*rx_watchdog)(void __iomem *ioaddr, u32 riwt, u32 number_chan);
-+ void (*set_tx_ring_len)(void __iomem *ioaddr, u32 len, u32 chan);
-+ void (*set_rx_ring_len)(void __iomem *ioaddr, u32 len, u32 chan);
- void (*set_rx_tail_ptr)(void __iomem *ioaddr, u32 tail_ptr, u32 chan);
- void (*set_tx_tail_ptr)(void __iomem *ioaddr, u32 tail_ptr, u32 chan);
- void (*enable_tso)(void __iomem *ioaddr, bool en, u32 chan);
-@@ -451,20 +474,44 @@ struct mac_device_info;
- struct stmmac_ops {
- /* MAC core initialization */
- void (*core_init)(struct mac_device_info *hw, int mtu);
-+ /* Enable the MAC RX/TX */
-+ void (*set_mac)(void __iomem *ioaddr, bool enable);
- /* Enable and verify that the IPC module is supported */
- int (*rx_ipc)(struct mac_device_info *hw);
- /* Enable RX Queues */
-- void (*rx_queue_enable)(struct mac_device_info *hw, u32 queue);
-+ void (*rx_queue_enable)(struct mac_device_info *hw, u8 mode, u32 queue);
-+ /* RX Queues Priority */
-+ void (*rx_queue_prio)(struct mac_device_info *hw, u32 prio, u32 queue);
-+ /* TX Queues Priority */
-+ void (*tx_queue_prio)(struct mac_device_info *hw, u32 prio, u32 queue);
-+ /* RX Queues Routing */
-+ void (*rx_queue_routing)(struct mac_device_info *hw, u8 packet,
-+ u32 queue);
-+ /* Program RX Algorithms */
-+ void (*prog_mtl_rx_algorithms)(struct mac_device_info *hw, u32 rx_alg);
-+ /* Program TX Algorithms */
-+ void (*prog_mtl_tx_algorithms)(struct mac_device_info *hw, u32 tx_alg);
-+ /* Set MTL TX queues weight */
-+ void (*set_mtl_tx_queue_weight)(struct mac_device_info *hw,
-+ u32 weight, u32 queue);
-+ /* RX MTL queue to RX dma mapping */
-+ void (*map_mtl_to_dma)(struct mac_device_info *hw, u32 queue, u32 chan);
-+ /* Configure AV Algorithm */
-+ void (*config_cbs)(struct mac_device_info *hw, u32 send_slope,
-+ u32 idle_slope, u32 high_credit, u32 low_credit,
-+ u32 queue);
- /* Dump MAC registers */
- void (*dump_regs)(struct mac_device_info *hw, u32 *reg_space);
- /* Handle extra events on specific interrupts hw dependent */
- int (*host_irq_status)(struct mac_device_info *hw,
- struct stmmac_extra_stats *x);
-+ /* Handle MTL interrupts */
-+ int (*host_mtl_irq_status)(struct mac_device_info *hw, u32 chan);
- /* Multicast filter setting */
- void (*set_filter)(struct mac_device_info *hw, struct net_device *dev);
- /* Flow control setting */
- void (*flow_ctrl)(struct mac_device_info *hw, unsigned int duplex,
-- unsigned int fc, unsigned int pause_time);
-+ unsigned int fc, unsigned int pause_time, u32 tx_cnt);
- /* Set power management mode (e.g. magic frame) */
- void (*pmt)(struct mac_device_info *hw, unsigned long mode);
- /* Set/Get Unicast MAC addresses */
-@@ -477,7 +524,8 @@ struct stmmac_ops {
- void (*reset_eee_mode)(struct mac_device_info *hw);
- void (*set_eee_timer)(struct mac_device_info *hw, int ls, int tw);
- void (*set_eee_pls)(struct mac_device_info *hw, int link);
-- void (*debug)(void __iomem *ioaddr, struct stmmac_extra_stats *x);
-+ void (*debug)(void __iomem *ioaddr, struct stmmac_extra_stats *x,
-+ u32 rx_queues, u32 tx_queues);
- /* PCS calls */
- void (*pcs_ctrl_ane)(void __iomem *ioaddr, bool ane, bool srgmi_ral,
- bool loopback);
-@@ -547,6 +595,11 @@ struct mac_device_info {
- unsigned int ps;
- };
-
-+struct stmmac_rx_routing {
-+ u32 reg_mask;
-+ u32 reg_shift;
-+};
-+
- struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr, int mcbins,
- int perfect_uc_entries,
- int *synopsys_id);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
-@@ -14,16 +14,34 @@
- #include <linux/clk.h>
- #include <linux/clk-provider.h>
- #include <linux/device.h>
-+#include <linux/gpio/consumer.h>
- #include <linux/ethtool.h>
- #include <linux/io.h>
-+#include <linux/iopoll.h>
- #include <linux/ioport.h>
- #include <linux/module.h>
-+#include <linux/of_device.h>
- #include <linux/of_net.h>
- #include <linux/mfd/syscon.h>
- #include <linux/platform_device.h>
-+#include <linux/reset.h>
- #include <linux/stmmac.h>
-
- #include "stmmac_platform.h"
-+#include "dwmac4.h"
-+
-+struct tegra_eqos {
-+ struct device *dev;
-+ void __iomem *regs;
-+
-+ struct reset_control *rst;
-+ struct clk *clk_master;
-+ struct clk *clk_slave;
-+ struct clk *clk_tx;
-+ struct clk *clk_rx;
-+
-+ struct gpio_desc *reset;
-+};
-
- static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
- struct plat_stmmacenet_data *plat_dat)
-@@ -106,13 +124,309 @@ static int dwc_eth_dwmac_config_dt(struc
- return 0;
- }
-
-+static void *dwc_qos_probe(struct platform_device *pdev,
-+ struct plat_stmmacenet_data *plat_dat,
-+ struct stmmac_resources *stmmac_res)
-+{
-+ int err;
-+
-+ plat_dat->stmmac_clk = devm_clk_get(&pdev->dev, "apb_pclk");
-+ if (IS_ERR(plat_dat->stmmac_clk)) {
-+ dev_err(&pdev->dev, "apb_pclk clock not found.\n");
-+ return ERR_CAST(plat_dat->stmmac_clk);
-+ }
-+
-+ err = clk_prepare_enable(plat_dat->stmmac_clk);
-+ if (err < 0) {
-+ dev_err(&pdev->dev, "failed to enable apb_pclk clock: %d\n",
-+ err);
-+ return ERR_PTR(err);
-+ }
-+
-+ plat_dat->pclk = devm_clk_get(&pdev->dev, "phy_ref_clk");
-+ if (IS_ERR(plat_dat->pclk)) {
-+ dev_err(&pdev->dev, "phy_ref_clk clock not found.\n");
-+ err = PTR_ERR(plat_dat->pclk);
-+ goto disable;
-+ }
-+
-+ err = clk_prepare_enable(plat_dat->pclk);
-+ if (err < 0) {
-+ dev_err(&pdev->dev, "failed to enable phy_ref clock: %d\n",
-+ err);
-+ goto disable;
-+ }
-+
-+ return NULL;
-+
-+disable:
-+ clk_disable_unprepare(plat_dat->stmmac_clk);
-+ return ERR_PTR(err);
-+}
-+
-+static int dwc_qos_remove(struct platform_device *pdev)
-+{
-+ struct net_device *ndev = platform_get_drvdata(pdev);
-+ struct stmmac_priv *priv = netdev_priv(ndev);
-+
-+ clk_disable_unprepare(priv->plat->pclk);
-+ clk_disable_unprepare(priv->plat->stmmac_clk);
-+
-+ return 0;
-+}
-+
-+#define SDMEMCOMPPADCTRL 0x8800
-+#define SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD BIT(31)
-+
-+#define AUTO_CAL_CONFIG 0x8804
-+#define AUTO_CAL_CONFIG_START BIT(31)
-+#define AUTO_CAL_CONFIG_ENABLE BIT(29)
-+
-+#define AUTO_CAL_STATUS 0x880c
-+#define AUTO_CAL_STATUS_ACTIVE BIT(31)
-+
-+static void tegra_eqos_fix_speed(void *priv, unsigned int speed)
-+{
-+ struct tegra_eqos *eqos = priv;
-+ unsigned long rate = 125000000;
-+ bool needs_calibration = false;
-+ u32 value;
-+ int err;
-+
-+ switch (speed) {
-+ case SPEED_1000:
-+ needs_calibration = true;
-+ rate = 125000000;
-+ break;
-+
-+ case SPEED_100:
-+ needs_calibration = true;
-+ rate = 25000000;
-+ break;
-+
-+ case SPEED_10:
-+ rate = 2500000;
-+ break;
-+
-+ default:
-+ dev_err(eqos->dev, "invalid speed %u\n", speed);
-+ break;
-+ }
-+
-+ if (needs_calibration) {
-+ /* calibrate */
-+ value = readl(eqos->regs + SDMEMCOMPPADCTRL);
-+ value |= SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD;
-+ writel(value, eqos->regs + SDMEMCOMPPADCTRL);
-+
-+ udelay(1);
-+
-+ value = readl(eqos->regs + AUTO_CAL_CONFIG);
-+ value |= AUTO_CAL_CONFIG_START | AUTO_CAL_CONFIG_ENABLE;
-+ writel(value, eqos->regs + AUTO_CAL_CONFIG);
-+
-+ err = readl_poll_timeout_atomic(eqos->regs + AUTO_CAL_STATUS,
-+ value,
-+ value & AUTO_CAL_STATUS_ACTIVE,
-+ 1, 10);
-+ if (err < 0) {
-+ dev_err(eqos->dev, "calibration did not start\n");
-+ goto failed;
-+ }
-+
-+ err = readl_poll_timeout_atomic(eqos->regs + AUTO_CAL_STATUS,
-+ value,
-+ (value & AUTO_CAL_STATUS_ACTIVE) == 0,
-+ 20, 200);
-+ if (err < 0) {
-+ dev_err(eqos->dev, "calibration didn't finish\n");
-+ goto failed;
-+ }
-+
-+ failed:
-+ value = readl(eqos->regs + SDMEMCOMPPADCTRL);
-+ value &= ~SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD;
-+ writel(value, eqos->regs + SDMEMCOMPPADCTRL);
-+ } else {
-+ value = readl(eqos->regs + AUTO_CAL_CONFIG);
-+ value &= ~AUTO_CAL_CONFIG_ENABLE;
-+ writel(value, eqos->regs + AUTO_CAL_CONFIG);
-+ }
-+
-+ err = clk_set_rate(eqos->clk_tx, rate);
-+ if (err < 0)
-+ dev_err(eqos->dev, "failed to set TX rate: %d\n", err);
-+}
-+
-+static int tegra_eqos_init(struct platform_device *pdev, void *priv)
-+{
-+ struct tegra_eqos *eqos = priv;
-+ unsigned long rate;
-+ u32 value;
-+
-+ rate = clk_get_rate(eqos->clk_slave);
-+
-+ value = (rate / 1000000) - 1;
-+ writel(value, eqos->regs + GMAC_1US_TIC_COUNTER);
-+
-+ return 0;
-+}
-+
-+static void *tegra_eqos_probe(struct platform_device *pdev,
-+ struct plat_stmmacenet_data *data,
-+ struct stmmac_resources *res)
-+{
-+ struct tegra_eqos *eqos;
-+ int err;
-+
-+ eqos = devm_kzalloc(&pdev->dev, sizeof(*eqos), GFP_KERNEL);
-+ if (!eqos) {
-+ err = -ENOMEM;
-+ goto error;
-+ }
-+
-+ eqos->dev = &pdev->dev;
-+ eqos->regs = res->addr;
-+
-+ eqos->clk_master = devm_clk_get(&pdev->dev, "master_bus");
-+ if (IS_ERR(eqos->clk_master)) {
-+ err = PTR_ERR(eqos->clk_master);
-+ goto error;
-+ }
-+
-+ err = clk_prepare_enable(eqos->clk_master);
-+ if (err < 0)
-+ goto error;
-+
-+ eqos->clk_slave = devm_clk_get(&pdev->dev, "slave_bus");
-+ if (IS_ERR(eqos->clk_slave)) {
-+ err = PTR_ERR(eqos->clk_slave);
-+ goto disable_master;
-+ }
-+
-+ data->stmmac_clk = eqos->clk_slave;
-+
-+ err = clk_prepare_enable(eqos->clk_slave);
-+ if (err < 0)
-+ goto disable_master;
-+
-+ eqos->clk_rx = devm_clk_get(&pdev->dev, "rx");
-+ if (IS_ERR(eqos->clk_rx)) {
-+ err = PTR_ERR(eqos->clk_rx);
-+ goto disable_slave;
-+ }
-+
-+ err = clk_prepare_enable(eqos->clk_rx);
-+ if (err < 0)
-+ goto disable_slave;
-+
-+ eqos->clk_tx = devm_clk_get(&pdev->dev, "tx");
-+ if (IS_ERR(eqos->clk_tx)) {
-+ err = PTR_ERR(eqos->clk_tx);
-+ goto disable_rx;
-+ }
-+
-+ err = clk_prepare_enable(eqos->clk_tx);
-+ if (err < 0)
-+ goto disable_rx;
-+
-+ eqos->reset = devm_gpiod_get(&pdev->dev, "phy-reset", GPIOD_OUT_HIGH);
-+ if (IS_ERR(eqos->reset)) {
-+ err = PTR_ERR(eqos->reset);
-+ goto disable_tx;
-+ }
-+
-+ usleep_range(2000, 4000);
-+ gpiod_set_value(eqos->reset, 0);
-+
-+ eqos->rst = devm_reset_control_get(&pdev->dev, "eqos");
-+ if (IS_ERR(eqos->rst)) {
-+ err = PTR_ERR(eqos->rst);
-+ goto reset_phy;
-+ }
-+
-+ err = reset_control_assert(eqos->rst);
-+ if (err < 0)
-+ goto reset_phy;
-+
-+ usleep_range(2000, 4000);
-+
-+ err = reset_control_deassert(eqos->rst);
-+ if (err < 0)
-+ goto reset_phy;
-+
-+ usleep_range(2000, 4000);
-+
-+ data->fix_mac_speed = tegra_eqos_fix_speed;
-+ data->init = tegra_eqos_init;
-+ data->bsp_priv = eqos;
-+
-+ err = tegra_eqos_init(pdev, eqos);
-+ if (err < 0)
-+ goto reset;
-+
-+out:
-+ return eqos;
-+
-+reset:
-+ reset_control_assert(eqos->rst);
-+reset_phy:
-+ gpiod_set_value(eqos->reset, 1);
-+disable_tx:
-+ clk_disable_unprepare(eqos->clk_tx);
-+disable_rx:
-+ clk_disable_unprepare(eqos->clk_rx);
-+disable_slave:
-+ clk_disable_unprepare(eqos->clk_slave);
-+disable_master:
-+ clk_disable_unprepare(eqos->clk_master);
-+error:
-+ eqos = ERR_PTR(err);
-+ goto out;
-+}
-+
-+static int tegra_eqos_remove(struct platform_device *pdev)
-+{
-+ struct tegra_eqos *eqos = get_stmmac_bsp_priv(&pdev->dev);
-+
-+ reset_control_assert(eqos->rst);
-+ gpiod_set_value(eqos->reset, 1);
-+ clk_disable_unprepare(eqos->clk_tx);
-+ clk_disable_unprepare(eqos->clk_rx);
-+ clk_disable_unprepare(eqos->clk_slave);
-+ clk_disable_unprepare(eqos->clk_master);
-+
-+ return 0;
-+}
-+
-+struct dwc_eth_dwmac_data {
-+ void *(*probe)(struct platform_device *pdev,
-+ struct plat_stmmacenet_data *data,
-+ struct stmmac_resources *res);
-+ int (*remove)(struct platform_device *pdev);
-+};
-+
-+static const struct dwc_eth_dwmac_data dwc_qos_data = {
-+ .probe = dwc_qos_probe,
-+ .remove = dwc_qos_remove,
-+};
-+
-+static const struct dwc_eth_dwmac_data tegra_eqos_data = {
-+ .probe = tegra_eqos_probe,
-+ .remove = tegra_eqos_remove,
-+};
-+
- static int dwc_eth_dwmac_probe(struct platform_device *pdev)
- {
-+ const struct dwc_eth_dwmac_data *data;
- struct plat_stmmacenet_data *plat_dat;
- struct stmmac_resources stmmac_res;
- struct resource *res;
-+ void *priv;
- int ret;
-
-+ data = of_device_get_match_data(&pdev->dev);
-+
- memset(&stmmac_res, 0, sizeof(struct stmmac_resources));
-
- /**
-@@ -138,39 +452,26 @@ static int dwc_eth_dwmac_probe(struct pl
- if (IS_ERR(plat_dat))
- return PTR_ERR(plat_dat);
-
-- plat_dat->stmmac_clk = devm_clk_get(&pdev->dev, "apb_pclk");
-- if (IS_ERR(plat_dat->stmmac_clk)) {
-- dev_err(&pdev->dev, "apb_pclk clock not found.\n");
-- ret = PTR_ERR(plat_dat->stmmac_clk);
-- plat_dat->stmmac_clk = NULL;
-- goto err_remove_config_dt;
-+ priv = data->probe(pdev, plat_dat, &stmmac_res);
-+ if (IS_ERR(priv)) {
-+ ret = PTR_ERR(priv);
-+ dev_err(&pdev->dev, "failed to probe subdriver: %d\n", ret);
-+ goto remove_config;
- }
-- clk_prepare_enable(plat_dat->stmmac_clk);
--
-- plat_dat->pclk = devm_clk_get(&pdev->dev, "phy_ref_clk");
-- if (IS_ERR(plat_dat->pclk)) {
-- dev_err(&pdev->dev, "phy_ref_clk clock not found.\n");
-- ret = PTR_ERR(plat_dat->pclk);
-- plat_dat->pclk = NULL;
-- goto err_out_clk_dis_phy;
-- }
-- clk_prepare_enable(plat_dat->pclk);
-
- ret = dwc_eth_dwmac_config_dt(pdev, plat_dat);
- if (ret)
-- goto err_out_clk_dis_aper;
-+ goto remove;
-
- ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
- if (ret)
-- goto err_out_clk_dis_aper;
-+ goto remove;
-
-- return 0;
-+ return ret;
-
--err_out_clk_dis_aper:
-- clk_disable_unprepare(plat_dat->pclk);
--err_out_clk_dis_phy:
-- clk_disable_unprepare(plat_dat->stmmac_clk);
--err_remove_config_dt:
-+remove:
-+ data->remove(pdev);
-+remove_config:
- stmmac_remove_config_dt(pdev, plat_dat);
-
- return ret;
-@@ -178,11 +479,29 @@ err_remove_config_dt:
-
- static int dwc_eth_dwmac_remove(struct platform_device *pdev)
- {
-- return stmmac_pltfr_remove(pdev);
-+ struct net_device *ndev = platform_get_drvdata(pdev);
-+ struct stmmac_priv *priv = netdev_priv(ndev);
-+ const struct dwc_eth_dwmac_data *data;
-+ int err;
-+
-+ data = of_device_get_match_data(&pdev->dev);
-+
-+ err = stmmac_dvr_remove(&pdev->dev);
-+ if (err < 0)
-+ dev_err(&pdev->dev, "failed to remove platform: %d\n", err);
-+
-+ err = data->remove(pdev);
-+ if (err < 0)
-+ dev_err(&pdev->dev, "failed to remove subdriver: %d\n", err);
-+
-+ stmmac_remove_config_dt(pdev, priv->plat);
-+
-+ return err;
- }
-
- static const struct of_device_id dwc_eth_dwmac_match[] = {
-- { .compatible = "snps,dwc-qos-ethernet-4.10", },
-+ { .compatible = "snps,dwc-qos-ethernet-4.10", .data = &dwc_qos_data },
-+ { .compatible = "nvidia,tegra186-eqos", .data = &tegra_eqos_data },
- { }
- };
- MODULE_DEVICE_TABLE(of, dwc_eth_dwmac_match);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
-@@ -74,6 +74,10 @@ struct rk_priv_data {
- #define GRF_BIT(nr) (BIT(nr) | BIT(nr+16))
- #define GRF_CLR_BIT(nr) (BIT(nr+16))
-
-+#define DELAY_ENABLE(soc, tx, rx) \
-+ (((tx) ? soc##_GMAC_TXCLK_DLY_ENABLE : soc##_GMAC_TXCLK_DLY_DISABLE) | \
-+ ((rx) ? soc##_GMAC_RXCLK_DLY_ENABLE : soc##_GMAC_RXCLK_DLY_DISABLE))
-+
- #define RK3228_GRF_MAC_CON0 0x0900
- #define RK3228_GRF_MAC_CON1 0x0904
-
-@@ -115,8 +119,7 @@ static void rk3228_set_to_rgmii(struct r
- regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON1,
- RK3228_GMAC_PHY_INTF_SEL_RGMII |
- RK3228_GMAC_RMII_MODE_CLR |
-- RK3228_GMAC_RXCLK_DLY_ENABLE |
-- RK3228_GMAC_TXCLK_DLY_ENABLE);
-+ DELAY_ENABLE(RK3228, tx_delay, rx_delay));
-
- regmap_write(bsp_priv->grf, RK3228_GRF_MAC_CON0,
- RK3228_GMAC_CLK_RX_DL_CFG(rx_delay) |
-@@ -232,8 +235,7 @@ static void rk3288_set_to_rgmii(struct r
- RK3288_GMAC_PHY_INTF_SEL_RGMII |
- RK3288_GMAC_RMII_MODE_CLR);
- regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON3,
-- RK3288_GMAC_RXCLK_DLY_ENABLE |
-- RK3288_GMAC_TXCLK_DLY_ENABLE |
-+ DELAY_ENABLE(RK3288, tx_delay, rx_delay) |
- RK3288_GMAC_CLK_RX_DL_CFG(rx_delay) |
- RK3288_GMAC_CLK_TX_DL_CFG(tx_delay));
- }
-@@ -460,8 +462,7 @@ static void rk3366_set_to_rgmii(struct r
- RK3366_GMAC_PHY_INTF_SEL_RGMII |
- RK3366_GMAC_RMII_MODE_CLR);
- regmap_write(bsp_priv->grf, RK3366_GRF_SOC_CON7,
-- RK3366_GMAC_RXCLK_DLY_ENABLE |
-- RK3366_GMAC_TXCLK_DLY_ENABLE |
-+ DELAY_ENABLE(RK3366, tx_delay, rx_delay) |
- RK3366_GMAC_CLK_RX_DL_CFG(rx_delay) |
- RK3366_GMAC_CLK_TX_DL_CFG(tx_delay));
- }
-@@ -572,8 +573,7 @@ static void rk3368_set_to_rgmii(struct r
- RK3368_GMAC_PHY_INTF_SEL_RGMII |
- RK3368_GMAC_RMII_MODE_CLR);
- regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON16,
-- RK3368_GMAC_RXCLK_DLY_ENABLE |
-- RK3368_GMAC_TXCLK_DLY_ENABLE |
-+ DELAY_ENABLE(RK3368, tx_delay, rx_delay) |
- RK3368_GMAC_CLK_RX_DL_CFG(rx_delay) |
- RK3368_GMAC_CLK_TX_DL_CFG(tx_delay));
- }
-@@ -684,8 +684,7 @@ static void rk3399_set_to_rgmii(struct r
- RK3399_GMAC_PHY_INTF_SEL_RGMII |
- RK3399_GMAC_RMII_MODE_CLR);
- regmap_write(bsp_priv->grf, RK3399_GRF_SOC_CON6,
-- RK3399_GMAC_RXCLK_DLY_ENABLE |
-- RK3399_GMAC_TXCLK_DLY_ENABLE |
-+ DELAY_ENABLE(RK3399, tx_delay, rx_delay) |
- RK3399_GMAC_CLK_RX_DL_CFG(rx_delay) |
- RK3399_GMAC_CLK_TX_DL_CFG(tx_delay));
- }
-@@ -985,14 +984,29 @@ static int rk_gmac_powerup(struct rk_pri
- return ret;
-
- /*rmii or rgmii*/
-- if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII) {
-+ switch (bsp_priv->phy_iface) {
-+ case PHY_INTERFACE_MODE_RGMII:
- dev_info(dev, "init for RGMII\n");
- bsp_priv->ops->set_to_rgmii(bsp_priv, bsp_priv->tx_delay,
- bsp_priv->rx_delay);
-- } else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII) {
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII_ID:
-+ dev_info(dev, "init for RGMII_ID\n");
-+ bsp_priv->ops->set_to_rgmii(bsp_priv, 0, 0);
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII_RXID:
-+ dev_info(dev, "init for RGMII_RXID\n");
-+ bsp_priv->ops->set_to_rgmii(bsp_priv, bsp_priv->tx_delay, 0);
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII_TXID:
-+ dev_info(dev, "init for RGMII_TXID\n");
-+ bsp_priv->ops->set_to_rgmii(bsp_priv, 0, bsp_priv->rx_delay);
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
- dev_info(dev, "init for RMII\n");
- bsp_priv->ops->set_to_rmii(bsp_priv);
-- } else {
-+ break;
-+ default:
- dev_err(dev, "NO interface defined!\n");
- }
-
-@@ -1022,12 +1036,19 @@ static void rk_fix_speed(void *priv, uns
- struct rk_priv_data *bsp_priv = priv;
- struct device *dev = &bsp_priv->pdev->dev;
-
-- if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII)
-+ switch (bsp_priv->phy_iface) {
-+ case PHY_INTERFACE_MODE_RGMII:
-+ case PHY_INTERFACE_MODE_RGMII_ID:
-+ case PHY_INTERFACE_MODE_RGMII_RXID:
-+ case PHY_INTERFACE_MODE_RGMII_TXID:
- bsp_priv->ops->set_rgmii_speed(bsp_priv, speed);
-- else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
- bsp_priv->ops->set_rmii_speed(bsp_priv, speed);
-- else
-+ break;
-+ default:
- dev_err(dev, "unsupported interface %d", bsp_priv->phy_iface);
-+ }
- }
-
- static int rk_gmac_probe(struct platform_device *pdev)
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
-@@ -216,7 +216,8 @@ static void dwmac1000_set_filter(struct
-
-
- static void dwmac1000_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
-- unsigned int fc, unsigned int pause_time)
-+ unsigned int fc, unsigned int pause_time,
-+ u32 tx_cnt)
- {
- void __iomem *ioaddr = hw->pcsr;
- /* Set flow such that DZPQ in Mac Register 6 is 0,
-@@ -412,7 +413,8 @@ static void dwmac1000_get_adv_lp(void __
- dwmac_get_adv_lp(ioaddr, GMAC_PCS_BASE, adv);
- }
-
--static void dwmac1000_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x)
-+static void dwmac1000_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x,
-+ u32 rx_queues, u32 tx_queues)
- {
- u32 value = readl(ioaddr + GMAC_DEBUG);
-
-@@ -488,6 +490,7 @@ static void dwmac1000_debug(void __iomem
-
- static const struct stmmac_ops dwmac1000_ops = {
- .core_init = dwmac1000_core_init,
-+ .set_mac = stmmac_set_mac,
- .rx_ipc = dwmac1000_rx_ipc_enable,
- .dump_regs = dwmac1000_dump_regs,
- .host_irq_status = dwmac1000_irq_status,
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
-@@ -247,7 +247,8 @@ static void dwmac1000_get_hw_feature(voi
- dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
- }
-
--static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt)
-+static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
-+ u32 number_chan)
- {
- writel(riwt, ioaddr + DMA_RX_WATCHDOG);
- }
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
-@@ -131,7 +131,8 @@ static void dwmac100_set_filter(struct m
- }
-
- static void dwmac100_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
-- unsigned int fc, unsigned int pause_time)
-+ unsigned int fc, unsigned int pause_time,
-+ u32 tx_cnt)
- {
- void __iomem *ioaddr = hw->pcsr;
- unsigned int flow = MAC_FLOW_CTRL_ENABLE;
-@@ -149,6 +150,7 @@ static void dwmac100_pmt(struct mac_devi
-
- static const struct stmmac_ops dwmac100_ops = {
- .core_init = dwmac100_core_init,
-+ .set_mac = stmmac_set_mac,
- .rx_ipc = dwmac100_rx_ipc_enable,
- .dump_regs = dwmac100_dump_mac_regs,
- .host_irq_status = dwmac100_irq_status,
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
-@@ -22,9 +22,15 @@
- #define GMAC_HASH_TAB_32_63 0x00000014
- #define GMAC_RX_FLOW_CTRL 0x00000090
- #define GMAC_QX_TX_FLOW_CTRL(x) (0x70 + x * 4)
-+#define GMAC_TXQ_PRTY_MAP0 0x98
-+#define GMAC_TXQ_PRTY_MAP1 0x9C
- #define GMAC_RXQ_CTRL0 0x000000a0
-+#define GMAC_RXQ_CTRL1 0x000000a4
-+#define GMAC_RXQ_CTRL2 0x000000a8
-+#define GMAC_RXQ_CTRL3 0x000000ac
- #define GMAC_INT_STATUS 0x000000b0
- #define GMAC_INT_EN 0x000000b4
-+#define GMAC_1US_TIC_COUNTER 0x000000dc
- #define GMAC_PCS_BASE 0x000000e0
- #define GMAC_PHYIF_CONTROL_STATUS 0x000000f8
- #define GMAC_PMT 0x000000c0
-@@ -38,6 +44,22 @@
- #define GMAC_ADDR_HIGH(reg) (0x300 + reg * 8)
- #define GMAC_ADDR_LOW(reg) (0x304 + reg * 8)
-
-+/* RX Queues Routing */
-+#define GMAC_RXQCTRL_AVCPQ_MASK GENMASK(2, 0)
-+#define GMAC_RXQCTRL_AVCPQ_SHIFT 0
-+#define GMAC_RXQCTRL_PTPQ_MASK GENMASK(6, 4)
-+#define GMAC_RXQCTRL_PTPQ_SHIFT 4
-+#define GMAC_RXQCTRL_DCBCPQ_MASK GENMASK(10, 8)
-+#define GMAC_RXQCTRL_DCBCPQ_SHIFT 8
-+#define GMAC_RXQCTRL_UPQ_MASK GENMASK(14, 12)
-+#define GMAC_RXQCTRL_UPQ_SHIFT 12
-+#define GMAC_RXQCTRL_MCBCQ_MASK GENMASK(18, 16)
-+#define GMAC_RXQCTRL_MCBCQ_SHIFT 16
-+#define GMAC_RXQCTRL_MCBCQEN BIT(20)
-+#define GMAC_RXQCTRL_MCBCQEN_SHIFT 20
-+#define GMAC_RXQCTRL_TACPQE BIT(21)
-+#define GMAC_RXQCTRL_TACPQE_SHIFT 21
-+
- /* MAC Packet Filtering */
- #define GMAC_PACKET_FILTER_PR BIT(0)
- #define GMAC_PACKET_FILTER_HMC BIT(2)
-@@ -53,6 +75,14 @@
- /* MAC Flow Control RX */
- #define GMAC_RX_FLOW_CTRL_RFE BIT(0)
-
-+/* RX Queues Priorities */
-+#define GMAC_RXQCTRL_PSRQX_MASK(x) GENMASK(7 + ((x) * 8), 0 + ((x) * 8))
-+#define GMAC_RXQCTRL_PSRQX_SHIFT(x) ((x) * 8)
-+
-+/* TX Queues Priorities */
-+#define GMAC_TXQCTRL_PSTQX_MASK(x) GENMASK(7 + ((x) * 8), 0 + ((x) * 8))
-+#define GMAC_TXQCTRL_PSTQX_SHIFT(x) ((x) * 8)
-+
- /* MAC Flow Control TX */
- #define GMAC_TX_FLOW_CTRL_TFE BIT(1)
- #define GMAC_TX_FLOW_CTRL_PT_SHIFT 16
-@@ -148,6 +178,8 @@ enum power_event {
- /* MAC HW features1 bitmap */
- #define GMAC_HW_FEAT_AVSEL BIT(20)
- #define GMAC_HW_TSOEN BIT(18)
-+#define GMAC_HW_TXFIFOSIZE GENMASK(10, 6)
-+#define GMAC_HW_RXFIFOSIZE GENMASK(4, 0)
-
- /* MAC HW features2 bitmap */
- #define GMAC_HW_FEAT_TXCHCNT GENMASK(21, 18)
-@@ -161,8 +193,25 @@ enum power_event {
- #define GMAC_HI_REG_AE BIT(31)
-
- /* MTL registers */
-+#define MTL_OPERATION_MODE 0x00000c00
-+#define MTL_OPERATION_SCHALG_MASK GENMASK(6, 5)
-+#define MTL_OPERATION_SCHALG_WRR (0x0 << 5)
-+#define MTL_OPERATION_SCHALG_WFQ (0x1 << 5)
-+#define MTL_OPERATION_SCHALG_DWRR (0x2 << 5)
-+#define MTL_OPERATION_SCHALG_SP (0x3 << 5)
-+#define MTL_OPERATION_RAA BIT(2)
-+#define MTL_OPERATION_RAA_SP (0x0 << 2)
-+#define MTL_OPERATION_RAA_WSP (0x1 << 2)
-+
- #define MTL_INT_STATUS 0x00000c20
--#define MTL_INT_Q0 BIT(0)
-+#define MTL_INT_QX(x) BIT(x)
-+
-+#define MTL_RXQ_DMA_MAP0 0x00000c30 /* queue 0 to 3 */
-+#define MTL_RXQ_DMA_MAP1 0x00000c34 /* queue 4 to 7 */
-+#define MTL_RXQ_DMA_Q04MDMACH_MASK GENMASK(3, 0)
-+#define MTL_RXQ_DMA_Q04MDMACH(x) ((x) << 0)
-+#define MTL_RXQ_DMA_QXMDMACH_MASK(x) GENMASK(11 + (8 * ((x) - 1)), 8 * (x))
-+#define MTL_RXQ_DMA_QXMDMACH(chan, q) ((chan) << (8 * (q)))
-
- #define MTL_CHAN_BASE_ADDR 0x00000d00
- #define MTL_CHAN_BASE_OFFSET 0x40
-@@ -180,6 +229,7 @@ enum power_event {
- #define MTL_OP_MODE_TSF BIT(1)
-
- #define MTL_OP_MODE_TQS_MASK GENMASK(24, 16)
-+#define MTL_OP_MODE_TQS_SHIFT 16
-
- #define MTL_OP_MODE_TTC_MASK 0x70
- #define MTL_OP_MODE_TTC_SHIFT 4
-@@ -193,6 +243,17 @@ enum power_event {
- #define MTL_OP_MODE_TTC_384 (6 << MTL_OP_MODE_TTC_SHIFT)
- #define MTL_OP_MODE_TTC_512 (7 << MTL_OP_MODE_TTC_SHIFT)
-
-+#define MTL_OP_MODE_RQS_MASK GENMASK(29, 20)
-+#define MTL_OP_MODE_RQS_SHIFT 20
-+
-+#define MTL_OP_MODE_RFD_MASK GENMASK(19, 14)
-+#define MTL_OP_MODE_RFD_SHIFT 14
-+
-+#define MTL_OP_MODE_RFA_MASK GENMASK(13, 8)
-+#define MTL_OP_MODE_RFA_SHIFT 8
-+
-+#define MTL_OP_MODE_EHFC BIT(7)
-+
- #define MTL_OP_MODE_RTC_MASK 0x18
- #define MTL_OP_MODE_RTC_SHIFT 3
-
-@@ -201,6 +262,46 @@ enum power_event {
- #define MTL_OP_MODE_RTC_96 (2 << MTL_OP_MODE_RTC_SHIFT)
- #define MTL_OP_MODE_RTC_128 (3 << MTL_OP_MODE_RTC_SHIFT)
-
-+/* MTL ETS Control register */
-+#define MTL_ETS_CTRL_BASE_ADDR 0x00000d10
-+#define MTL_ETS_CTRL_BASE_OFFSET 0x40
-+#define MTL_ETSX_CTRL_BASE_ADDR(x) (MTL_ETS_CTRL_BASE_ADDR + \
-+ ((x) * MTL_ETS_CTRL_BASE_OFFSET))
-+
-+#define MTL_ETS_CTRL_CC BIT(3)
-+#define MTL_ETS_CTRL_AVALG BIT(2)
-+
-+/* MTL Queue Quantum Weight */
-+#define MTL_TXQ_WEIGHT_BASE_ADDR 0x00000d18
-+#define MTL_TXQ_WEIGHT_BASE_OFFSET 0x40
-+#define MTL_TXQX_WEIGHT_BASE_ADDR(x) (MTL_TXQ_WEIGHT_BASE_ADDR + \
-+ ((x) * MTL_TXQ_WEIGHT_BASE_OFFSET))
-+#define MTL_TXQ_WEIGHT_ISCQW_MASK GENMASK(20, 0)
-+
-+/* MTL sendSlopeCredit register */
-+#define MTL_SEND_SLP_CRED_BASE_ADDR 0x00000d1c
-+#define MTL_SEND_SLP_CRED_OFFSET 0x40
-+#define MTL_SEND_SLP_CREDX_BASE_ADDR(x) (MTL_SEND_SLP_CRED_BASE_ADDR + \
-+ ((x) * MTL_SEND_SLP_CRED_OFFSET))
-+
-+#define MTL_SEND_SLP_CRED_SSC_MASK GENMASK(13, 0)
-+
-+/* MTL hiCredit register */
-+#define MTL_HIGH_CRED_BASE_ADDR 0x00000d20
-+#define MTL_HIGH_CRED_OFFSET 0x40
-+#define MTL_HIGH_CREDX_BASE_ADDR(x) (MTL_HIGH_CRED_BASE_ADDR + \
-+ ((x) * MTL_HIGH_CRED_OFFSET))
-+
-+#define MTL_HIGH_CRED_HC_MASK GENMASK(28, 0)
-+
-+/* MTL loCredit register */
-+#define MTL_LOW_CRED_BASE_ADDR 0x00000d24
-+#define MTL_LOW_CRED_OFFSET 0x40
-+#define MTL_LOW_CREDX_BASE_ADDR(x) (MTL_LOW_CRED_BASE_ADDR + \
-+ ((x) * MTL_LOW_CRED_OFFSET))
-+
-+#define MTL_HIGH_CRED_LC_MASK GENMASK(28, 0)
-+
- /* MTL debug */
- #define MTL_DEBUG_TXSTSFSTS BIT(5)
- #define MTL_DEBUG_TXFSTS BIT(4)
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
-@@ -59,17 +59,211 @@ static void dwmac4_core_init(struct mac_
- writel(value, ioaddr + GMAC_INT_EN);
- }
-
--static void dwmac4_rx_queue_enable(struct mac_device_info *hw, u32 queue)
-+static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
-+ u8 mode, u32 queue)
- {
- void __iomem *ioaddr = hw->pcsr;
- u32 value = readl(ioaddr + GMAC_RXQ_CTRL0);
-
- value &= GMAC_RX_QUEUE_CLEAR(queue);
-- value |= GMAC_RX_AV_QUEUE_ENABLE(queue);
-+ if (mode == MTL_QUEUE_AVB)
-+ value |= GMAC_RX_AV_QUEUE_ENABLE(queue);
-+ else if (mode == MTL_QUEUE_DCB)
-+ value |= GMAC_RX_DCB_QUEUE_ENABLE(queue);
-
- writel(value, ioaddr + GMAC_RXQ_CTRL0);
- }
-
-+static void dwmac4_rx_queue_priority(struct mac_device_info *hw,
-+ u32 prio, u32 queue)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 base_register;
-+ u32 value;
-+
-+ base_register = (queue < 4) ? GMAC_RXQ_CTRL2 : GMAC_RXQ_CTRL3;
-+
-+ value = readl(ioaddr + base_register);
-+
-+ value &= ~GMAC_RXQCTRL_PSRQX_MASK(queue);
-+ value |= (prio << GMAC_RXQCTRL_PSRQX_SHIFT(queue)) &
-+ GMAC_RXQCTRL_PSRQX_MASK(queue);
-+ writel(value, ioaddr + base_register);
-+}
-+
-+static void dwmac4_tx_queue_priority(struct mac_device_info *hw,
-+ u32 prio, u32 queue)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 base_register;
-+ u32 value;
-+
-+ base_register = (queue < 4) ? GMAC_TXQ_PRTY_MAP0 : GMAC_TXQ_PRTY_MAP1;
-+
-+ value = readl(ioaddr + base_register);
-+
-+ value &= ~GMAC_TXQCTRL_PSTQX_MASK(queue);
-+ value |= (prio << GMAC_TXQCTRL_PSTQX_SHIFT(queue)) &
-+ GMAC_TXQCTRL_PSTQX_MASK(queue);
-+
-+ writel(value, ioaddr + base_register);
-+}
-+
-+static void dwmac4_tx_queue_routing(struct mac_device_info *hw,
-+ u8 packet, u32 queue)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 value;
-+
-+ const struct stmmac_rx_routing route_possibilities[] = {
-+ { GMAC_RXQCTRL_AVCPQ_MASK, GMAC_RXQCTRL_AVCPQ_SHIFT },
-+ { GMAC_RXQCTRL_PTPQ_MASK, GMAC_RXQCTRL_PTPQ_SHIFT },
-+ { GMAC_RXQCTRL_DCBCPQ_MASK, GMAC_RXQCTRL_DCBCPQ_SHIFT },
-+ { GMAC_RXQCTRL_UPQ_MASK, GMAC_RXQCTRL_UPQ_SHIFT },
-+ { GMAC_RXQCTRL_MCBCQ_MASK, GMAC_RXQCTRL_MCBCQ_SHIFT },
-+ };
-+
-+ value = readl(ioaddr + GMAC_RXQ_CTRL1);
-+
-+ /* routing configuration */
-+ value &= ~route_possibilities[packet - 1].reg_mask;
-+ value |= (queue << route_possibilities[packet-1].reg_shift) &
-+ route_possibilities[packet - 1].reg_mask;
-+
-+ /* some packets require extra ops */
-+ if (packet == PACKET_AVCPQ) {
-+ value &= ~GMAC_RXQCTRL_TACPQE;
-+ value |= 0x1 << GMAC_RXQCTRL_TACPQE_SHIFT;
-+ } else if (packet == PACKET_MCBCQ) {
-+ value &= ~GMAC_RXQCTRL_MCBCQEN;
-+ value |= 0x1 << GMAC_RXQCTRL_MCBCQEN_SHIFT;
-+ }
-+
-+ writel(value, ioaddr + GMAC_RXQ_CTRL1);
-+}
-+
-+static void dwmac4_prog_mtl_rx_algorithms(struct mac_device_info *hw,
-+ u32 rx_alg)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 value = readl(ioaddr + MTL_OPERATION_MODE);
-+
-+ value &= ~MTL_OPERATION_RAA;
-+ switch (rx_alg) {
-+ case MTL_RX_ALGORITHM_SP:
-+ value |= MTL_OPERATION_RAA_SP;
-+ break;
-+ case MTL_RX_ALGORITHM_WSP:
-+ value |= MTL_OPERATION_RAA_WSP;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ writel(value, ioaddr + MTL_OPERATION_MODE);
-+}
-+
-+static void dwmac4_prog_mtl_tx_algorithms(struct mac_device_info *hw,
-+ u32 tx_alg)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 value = readl(ioaddr + MTL_OPERATION_MODE);
-+
-+ value &= ~MTL_OPERATION_SCHALG_MASK;
-+ switch (tx_alg) {
-+ case MTL_TX_ALGORITHM_WRR:
-+ value |= MTL_OPERATION_SCHALG_WRR;
-+ break;
-+ case MTL_TX_ALGORITHM_WFQ:
-+ value |= MTL_OPERATION_SCHALG_WFQ;
-+ break;
-+ case MTL_TX_ALGORITHM_DWRR:
-+ value |= MTL_OPERATION_SCHALG_DWRR;
-+ break;
-+ case MTL_TX_ALGORITHM_SP:
-+ value |= MTL_OPERATION_SCHALG_SP;
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+static void dwmac4_set_mtl_tx_queue_weight(struct mac_device_info *hw,
-+ u32 weight, u32 queue)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 value = readl(ioaddr + MTL_TXQX_WEIGHT_BASE_ADDR(queue));
-+
-+ value &= ~MTL_TXQ_WEIGHT_ISCQW_MASK;
-+ value |= weight & MTL_TXQ_WEIGHT_ISCQW_MASK;
-+ writel(value, ioaddr + MTL_TXQX_WEIGHT_BASE_ADDR(queue));
-+}
-+
-+static void dwmac4_map_mtl_dma(struct mac_device_info *hw, u32 queue, u32 chan)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 value;
-+
-+ if (queue < 4)
-+ value = readl(ioaddr + MTL_RXQ_DMA_MAP0);
-+ else
-+ value = readl(ioaddr + MTL_RXQ_DMA_MAP1);
-+
-+ if (queue == 0 || queue == 4) {
-+ value &= ~MTL_RXQ_DMA_Q04MDMACH_MASK;
-+ value |= MTL_RXQ_DMA_Q04MDMACH(chan);
-+ } else {
-+ value &= ~MTL_RXQ_DMA_QXMDMACH_MASK(queue);
-+ value |= MTL_RXQ_DMA_QXMDMACH(chan, queue);
-+ }
-+
-+ if (queue < 4)
-+ writel(value, ioaddr + MTL_RXQ_DMA_MAP0);
-+ else
-+ writel(value, ioaddr + MTL_RXQ_DMA_MAP1);
-+}
-+
-+static void dwmac4_config_cbs(struct mac_device_info *hw,
-+ u32 send_slope, u32 idle_slope,
-+ u32 high_credit, u32 low_credit, u32 queue)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 value;
-+
-+ pr_debug("Queue %d configured as AVB. Parameters:\n", queue);
-+ pr_debug("\tsend_slope: 0x%08x\n", send_slope);
-+ pr_debug("\tidle_slope: 0x%08x\n", idle_slope);
-+ pr_debug("\thigh_credit: 0x%08x\n", high_credit);
-+ pr_debug("\tlow_credit: 0x%08x\n", low_credit);
-+
-+ /* enable AV algorithm */
-+ value = readl(ioaddr + MTL_ETSX_CTRL_BASE_ADDR(queue));
-+ value |= MTL_ETS_CTRL_AVALG;
-+ value |= MTL_ETS_CTRL_CC;
-+ writel(value, ioaddr + MTL_ETSX_CTRL_BASE_ADDR(queue));
-+
-+ /* configure send slope */
-+ value = readl(ioaddr + MTL_SEND_SLP_CREDX_BASE_ADDR(queue));
-+ value &= ~MTL_SEND_SLP_CRED_SSC_MASK;
-+ value |= send_slope & MTL_SEND_SLP_CRED_SSC_MASK;
-+ writel(value, ioaddr + MTL_SEND_SLP_CREDX_BASE_ADDR(queue));
-+
-+ /* configure idle slope (same register as tx weight) */
-+ dwmac4_set_mtl_tx_queue_weight(hw, idle_slope, queue);
-+
-+ /* configure high credit */
-+ value = readl(ioaddr + MTL_HIGH_CREDX_BASE_ADDR(queue));
-+ value &= ~MTL_HIGH_CRED_HC_MASK;
-+ value |= high_credit & MTL_HIGH_CRED_HC_MASK;
-+ writel(value, ioaddr + MTL_HIGH_CREDX_BASE_ADDR(queue));
-+
-+ /* configure high credit */
-+ value = readl(ioaddr + MTL_LOW_CREDX_BASE_ADDR(queue));
-+ value &= ~MTL_HIGH_CRED_LC_MASK;
-+ value |= low_credit & MTL_HIGH_CRED_LC_MASK;
-+ writel(value, ioaddr + MTL_LOW_CREDX_BASE_ADDR(queue));
-+}
-+
- static void dwmac4_dump_regs(struct mac_device_info *hw, u32 *reg_space)
- {
- void __iomem *ioaddr = hw->pcsr;
-@@ -251,11 +445,12 @@ static void dwmac4_set_filter(struct mac
- }
-
- static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
-- unsigned int fc, unsigned int pause_time)
-+ unsigned int fc, unsigned int pause_time,
-+ u32 tx_cnt)
- {
- void __iomem *ioaddr = hw->pcsr;
-- u32 channel = STMMAC_CHAN0; /* FIXME */
- unsigned int flow = 0;
-+ u32 queue = 0;
-
- pr_debug("GMAC Flow-Control:\n");
- if (fc & FLOW_RX) {
-@@ -265,13 +460,18 @@ static void dwmac4_flow_ctrl(struct mac_
- }
- if (fc & FLOW_TX) {
- pr_debug("\tTransmit Flow-Control ON\n");
-- flow |= GMAC_TX_FLOW_CTRL_TFE;
-- writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(channel));
-
-- if (duplex) {
-+ if (duplex)
- pr_debug("\tduplex mode: PAUSE %d\n", pause_time);
-- flow |= (pause_time << GMAC_TX_FLOW_CTRL_PT_SHIFT);
-- writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(channel));
-+
-+ for (queue = 0; queue < tx_cnt; queue++) {
-+ flow |= GMAC_TX_FLOW_CTRL_TFE;
-+
-+ if (duplex)
-+ flow |=
-+ (pause_time << GMAC_TX_FLOW_CTRL_PT_SHIFT);
-+
-+ writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(queue));
- }
- }
- }
-@@ -325,11 +525,34 @@ static void dwmac4_phystatus(void __iome
- }
- }
-
-+static int dwmac4_irq_mtl_status(struct mac_device_info *hw, u32 chan)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 mtl_int_qx_status;
-+ int ret = 0;
-+
-+ mtl_int_qx_status = readl(ioaddr + MTL_INT_STATUS);
-+
-+ /* Check MTL Interrupt */
-+ if (mtl_int_qx_status & MTL_INT_QX(chan)) {
-+ /* read Queue x Interrupt status */
-+ u32 status = readl(ioaddr + MTL_CHAN_INT_CTRL(chan));
-+
-+ if (status & MTL_RX_OVERFLOW_INT) {
-+ /* clear Interrupt */
-+ writel(status | MTL_RX_OVERFLOW_INT,
-+ ioaddr + MTL_CHAN_INT_CTRL(chan));
-+ ret = CORE_IRQ_MTL_RX_OVERFLOW;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
- static int dwmac4_irq_status(struct mac_device_info *hw,
- struct stmmac_extra_stats *x)
- {
- void __iomem *ioaddr = hw->pcsr;
-- u32 mtl_int_qx_status;
- u32 intr_status;
- int ret = 0;
-
-@@ -348,20 +571,6 @@ static int dwmac4_irq_status(struct mac_
- x->irq_receive_pmt_irq_n++;
- }
-
-- mtl_int_qx_status = readl(ioaddr + MTL_INT_STATUS);
-- /* Check MTL Interrupt: Currently only one queue is used: Q0. */
-- if (mtl_int_qx_status & MTL_INT_Q0) {
-- /* read Queue 0 Interrupt status */
-- u32 status = readl(ioaddr + MTL_CHAN_INT_CTRL(STMMAC_CHAN0));
--
-- if (status & MTL_RX_OVERFLOW_INT) {
-- /* clear Interrupt */
-- writel(status | MTL_RX_OVERFLOW_INT,
-- ioaddr + MTL_CHAN_INT_CTRL(STMMAC_CHAN0));
-- ret = CORE_IRQ_MTL_RX_OVERFLOW;
-- }
-- }
--
- dwmac_pcs_isr(ioaddr, GMAC_PCS_BASE, intr_status, x);
- if (intr_status & PCS_RGSMIIIS_IRQ)
- dwmac4_phystatus(ioaddr, x);
-@@ -369,64 +578,69 @@ static int dwmac4_irq_status(struct mac_
- return ret;
- }
-
--static void dwmac4_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x)
-+static void dwmac4_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x,
-+ u32 rx_queues, u32 tx_queues)
- {
- u32 value;
-+ u32 queue;
-
-- /* Currently only channel 0 is supported */
-- value = readl(ioaddr + MTL_CHAN_TX_DEBUG(STMMAC_CHAN0));
-+ for (queue = 0; queue < tx_queues; queue++) {
-+ value = readl(ioaddr + MTL_CHAN_TX_DEBUG(queue));
-
-- if (value & MTL_DEBUG_TXSTSFSTS)
-- x->mtl_tx_status_fifo_full++;
-- if (value & MTL_DEBUG_TXFSTS)
-- x->mtl_tx_fifo_not_empty++;
-- if (value & MTL_DEBUG_TWCSTS)
-- x->mmtl_fifo_ctrl++;
-- if (value & MTL_DEBUG_TRCSTS_MASK) {
-- u32 trcsts = (value & MTL_DEBUG_TRCSTS_MASK)
-- >> MTL_DEBUG_TRCSTS_SHIFT;
-- if (trcsts == MTL_DEBUG_TRCSTS_WRITE)
-- x->mtl_tx_fifo_read_ctrl_write++;
-- else if (trcsts == MTL_DEBUG_TRCSTS_TXW)
-- x->mtl_tx_fifo_read_ctrl_wait++;
-- else if (trcsts == MTL_DEBUG_TRCSTS_READ)
-- x->mtl_tx_fifo_read_ctrl_read++;
-- else
-- x->mtl_tx_fifo_read_ctrl_idle++;
-+ if (value & MTL_DEBUG_TXSTSFSTS)
-+ x->mtl_tx_status_fifo_full++;
-+ if (value & MTL_DEBUG_TXFSTS)
-+ x->mtl_tx_fifo_not_empty++;
-+ if (value & MTL_DEBUG_TWCSTS)
-+ x->mmtl_fifo_ctrl++;
-+ if (value & MTL_DEBUG_TRCSTS_MASK) {
-+ u32 trcsts = (value & MTL_DEBUG_TRCSTS_MASK)
-+ >> MTL_DEBUG_TRCSTS_SHIFT;
-+ if (trcsts == MTL_DEBUG_TRCSTS_WRITE)
-+ x->mtl_tx_fifo_read_ctrl_write++;
-+ else if (trcsts == MTL_DEBUG_TRCSTS_TXW)
-+ x->mtl_tx_fifo_read_ctrl_wait++;
-+ else if (trcsts == MTL_DEBUG_TRCSTS_READ)
-+ x->mtl_tx_fifo_read_ctrl_read++;
-+ else
-+ x->mtl_tx_fifo_read_ctrl_idle++;
-+ }
-+ if (value & MTL_DEBUG_TXPAUSED)
-+ x->mac_tx_in_pause++;
- }
-- if (value & MTL_DEBUG_TXPAUSED)
-- x->mac_tx_in_pause++;
-
-- value = readl(ioaddr + MTL_CHAN_RX_DEBUG(STMMAC_CHAN0));
-+ for (queue = 0; queue < rx_queues; queue++) {
-+ value = readl(ioaddr + MTL_CHAN_RX_DEBUG(queue));
-
-- if (value & MTL_DEBUG_RXFSTS_MASK) {
-- u32 rxfsts = (value & MTL_DEBUG_RXFSTS_MASK)
-- >> MTL_DEBUG_RRCSTS_SHIFT;
--
-- if (rxfsts == MTL_DEBUG_RXFSTS_FULL)
-- x->mtl_rx_fifo_fill_level_full++;
-- else if (rxfsts == MTL_DEBUG_RXFSTS_AT)
-- x->mtl_rx_fifo_fill_above_thresh++;
-- else if (rxfsts == MTL_DEBUG_RXFSTS_BT)
-- x->mtl_rx_fifo_fill_below_thresh++;
-- else
-- x->mtl_rx_fifo_fill_level_empty++;
-- }
-- if (value & MTL_DEBUG_RRCSTS_MASK) {
-- u32 rrcsts = (value & MTL_DEBUG_RRCSTS_MASK) >>
-- MTL_DEBUG_RRCSTS_SHIFT;
--
-- if (rrcsts == MTL_DEBUG_RRCSTS_FLUSH)
-- x->mtl_rx_fifo_read_ctrl_flush++;
-- else if (rrcsts == MTL_DEBUG_RRCSTS_RSTAT)
-- x->mtl_rx_fifo_read_ctrl_read_data++;
-- else if (rrcsts == MTL_DEBUG_RRCSTS_RDATA)
-- x->mtl_rx_fifo_read_ctrl_status++;
-- else
-- x->mtl_rx_fifo_read_ctrl_idle++;
-+ if (value & MTL_DEBUG_RXFSTS_MASK) {
-+ u32 rxfsts = (value & MTL_DEBUG_RXFSTS_MASK)
-+ >> MTL_DEBUG_RRCSTS_SHIFT;
-+
-+ if (rxfsts == MTL_DEBUG_RXFSTS_FULL)
-+ x->mtl_rx_fifo_fill_level_full++;
-+ else if (rxfsts == MTL_DEBUG_RXFSTS_AT)
-+ x->mtl_rx_fifo_fill_above_thresh++;
-+ else if (rxfsts == MTL_DEBUG_RXFSTS_BT)
-+ x->mtl_rx_fifo_fill_below_thresh++;
-+ else
-+ x->mtl_rx_fifo_fill_level_empty++;
-+ }
-+ if (value & MTL_DEBUG_RRCSTS_MASK) {
-+ u32 rrcsts = (value & MTL_DEBUG_RRCSTS_MASK) >>
-+ MTL_DEBUG_RRCSTS_SHIFT;
-+
-+ if (rrcsts == MTL_DEBUG_RRCSTS_FLUSH)
-+ x->mtl_rx_fifo_read_ctrl_flush++;
-+ else if (rrcsts == MTL_DEBUG_RRCSTS_RSTAT)
-+ x->mtl_rx_fifo_read_ctrl_read_data++;
-+ else if (rrcsts == MTL_DEBUG_RRCSTS_RDATA)
-+ x->mtl_rx_fifo_read_ctrl_status++;
-+ else
-+ x->mtl_rx_fifo_read_ctrl_idle++;
-+ }
-+ if (value & MTL_DEBUG_RWCSTS)
-+ x->mtl_rx_fifo_ctrl_active++;
- }
-- if (value & MTL_DEBUG_RWCSTS)
-- x->mtl_rx_fifo_ctrl_active++;
-
- /* GMAC debug */
- value = readl(ioaddr + GMAC_DEBUG);
-@@ -455,10 +669,51 @@ static void dwmac4_debug(void __iomem *i
-
- static const struct stmmac_ops dwmac4_ops = {
- .core_init = dwmac4_core_init,
-+ .set_mac = stmmac_set_mac,
- .rx_ipc = dwmac4_rx_ipc_enable,
- .rx_queue_enable = dwmac4_rx_queue_enable,
-+ .rx_queue_prio = dwmac4_rx_queue_priority,
-+ .tx_queue_prio = dwmac4_tx_queue_priority,
-+ .rx_queue_routing = dwmac4_tx_queue_routing,
-+ .prog_mtl_rx_algorithms = dwmac4_prog_mtl_rx_algorithms,
-+ .prog_mtl_tx_algorithms = dwmac4_prog_mtl_tx_algorithms,
-+ .set_mtl_tx_queue_weight = dwmac4_set_mtl_tx_queue_weight,
-+ .map_mtl_to_dma = dwmac4_map_mtl_dma,
-+ .config_cbs = dwmac4_config_cbs,
- .dump_regs = dwmac4_dump_regs,
- .host_irq_status = dwmac4_irq_status,
-+ .host_mtl_irq_status = dwmac4_irq_mtl_status,
-+ .flow_ctrl = dwmac4_flow_ctrl,
-+ .pmt = dwmac4_pmt,
-+ .set_umac_addr = dwmac4_set_umac_addr,
-+ .get_umac_addr = dwmac4_get_umac_addr,
-+ .set_eee_mode = dwmac4_set_eee_mode,
-+ .reset_eee_mode = dwmac4_reset_eee_mode,
-+ .set_eee_timer = dwmac4_set_eee_timer,
-+ .set_eee_pls = dwmac4_set_eee_pls,
-+ .pcs_ctrl_ane = dwmac4_ctrl_ane,
-+ .pcs_rane = dwmac4_rane,
-+ .pcs_get_adv_lp = dwmac4_get_adv_lp,
-+ .debug = dwmac4_debug,
-+ .set_filter = dwmac4_set_filter,
-+};
-+
-+static const struct stmmac_ops dwmac410_ops = {
-+ .core_init = dwmac4_core_init,
-+ .set_mac = stmmac_dwmac4_set_mac,
-+ .rx_ipc = dwmac4_rx_ipc_enable,
-+ .rx_queue_enable = dwmac4_rx_queue_enable,
-+ .rx_queue_prio = dwmac4_rx_queue_priority,
-+ .tx_queue_prio = dwmac4_tx_queue_priority,
-+ .rx_queue_routing = dwmac4_tx_queue_routing,
-+ .prog_mtl_rx_algorithms = dwmac4_prog_mtl_rx_algorithms,
-+ .prog_mtl_tx_algorithms = dwmac4_prog_mtl_tx_algorithms,
-+ .set_mtl_tx_queue_weight = dwmac4_set_mtl_tx_queue_weight,
-+ .map_mtl_to_dma = dwmac4_map_mtl_dma,
-+ .config_cbs = dwmac4_config_cbs,
-+ .dump_regs = dwmac4_dump_regs,
-+ .host_irq_status = dwmac4_irq_status,
-+ .host_mtl_irq_status = dwmac4_irq_mtl_status,
- .flow_ctrl = dwmac4_flow_ctrl,
- .pmt = dwmac4_pmt,
- .set_umac_addr = dwmac4_set_umac_addr,
-@@ -492,8 +747,6 @@ struct mac_device_info *dwmac4_setup(voi
- if (mac->multicast_filter_bins)
- mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
-
-- mac->mac = &dwmac4_ops;
--
- mac->link.port = GMAC_CONFIG_PS;
- mac->link.duplex = GMAC_CONFIG_DM;
- mac->link.speed = GMAC_CONFIG_FES;
-@@ -514,5 +767,10 @@ struct mac_device_info *dwmac4_setup(voi
- else
- mac->dma = &dwmac4_dma_ops;
-
-+ if (*synopsys_id >= DWMAC_CORE_4_00)
-+ mac->mac = &dwmac410_ops;
-+ else
-+ mac->mac = &dwmac4_ops;
-+
- return mac;
- }
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
-@@ -214,13 +214,13 @@ static int dwmac4_wrback_get_tx_timestam
- {
- /* Context type from W/B descriptor must be zero */
- if (le32_to_cpu(p->des3) & TDES3_CONTEXT_TYPE)
-- return -EINVAL;
-+ return 0;
-
- /* Tx Timestamp Status is 1 so des0 and des1'll have valid values */
- if (le32_to_cpu(p->des3) & TDES3_TIMESTAMP_STATUS)
-- return 0;
-+ return 1;
-
-- return 1;
-+ return 0;
- }
-
- static inline u64 dwmac4_get_timestamp(void *desc, u32 ats)
-@@ -282,7 +282,10 @@ static int dwmac4_wrback_get_rx_timestam
- }
- }
- exit:
-- return ret;
-+ if (likely(ret == 0))
-+ return 1;
-+
-+ return 0;
- }
-
- static void dwmac4_rd_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
-@@ -304,12 +307,13 @@ static void dwmac4_rd_init_tx_desc(struc
-
- static void dwmac4_rd_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
- bool csum_flag, int mode, bool tx_own,
-- bool ls)
-+ bool ls, unsigned int tot_pkt_len)
- {
- unsigned int tdes3 = le32_to_cpu(p->des3);
-
- p->des2 |= cpu_to_le32(len & TDES2_BUFFER1_SIZE_MASK);
-
-+ tdes3 |= tot_pkt_len & TDES3_PACKET_SIZE_MASK;
- if (is_fs)
- tdes3 |= TDES3_FIRST_DESCRIPTOR;
- else
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
-@@ -71,36 +71,48 @@ static void dwmac4_dma_axi(void __iomem
- writel(value, ioaddr + DMA_SYS_BUS_MODE);
- }
-
--static void dwmac4_dma_init_channel(void __iomem *ioaddr,
-- struct stmmac_dma_cfg *dma_cfg,
-- u32 dma_tx_phy, u32 dma_rx_phy,
-- u32 channel)
-+void dwmac4_dma_init_rx_chan(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_rx_phy, u32 chan)
- {
- u32 value;
-- int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
-- int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
-+ u32 rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
-
-- /* set PBL for each channels. Currently we affect same configuration
-- * on each channel
-- */
-- value = readl(ioaddr + DMA_CHAN_CONTROL(channel));
-- if (dma_cfg->pblx8)
-- value = value | DMA_BUS_MODE_PBL;
-- writel(value, ioaddr + DMA_CHAN_CONTROL(channel));
-+ value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan));
-+ value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
-+ writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
-+
-+ writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(chan));
-+}
-
-- value = readl(ioaddr + DMA_CHAN_TX_CONTROL(channel));
-+void dwmac4_dma_init_tx_chan(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_tx_phy, u32 chan)
-+{
-+ u32 value;
-+ u32 txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
-+
-+ value = readl(ioaddr + DMA_CHAN_TX_CONTROL(chan));
- value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT);
-- writel(value, ioaddr + DMA_CHAN_TX_CONTROL(channel));
-+ writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
-
-- value = readl(ioaddr + DMA_CHAN_RX_CONTROL(channel));
-- value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
-- writel(value, ioaddr + DMA_CHAN_RX_CONTROL(channel));
-+ writel(dma_tx_phy, ioaddr + DMA_CHAN_TX_BASE_ADDR(chan));
-+}
-
-- /* Mask interrupts by writing to CSR7 */
-- writel(DMA_CHAN_INTR_DEFAULT_MASK, ioaddr + DMA_CHAN_INTR_ENA(channel));
-+void dwmac4_dma_init_channel(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg, u32 chan)
-+{
-+ u32 value;
-+
-+ /* common channel control register config */
-+ value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
-+ if (dma_cfg->pblx8)
-+ value = value | DMA_BUS_MODE_PBL;
-+ writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
-
-- writel(dma_tx_phy, ioaddr + DMA_CHAN_TX_BASE_ADDR(channel));
-- writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(channel));
-+ /* Mask interrupts by writing to CSR7 */
-+ writel(DMA_CHAN_INTR_DEFAULT_MASK,
-+ ioaddr + DMA_CHAN_INTR_ENA(chan));
- }
-
- static void dwmac4_dma_init(void __iomem *ioaddr,
-@@ -108,7 +120,6 @@ static void dwmac4_dma_init(void __iomem
- u32 dma_tx, u32 dma_rx, int atds)
- {
- u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
-- int i;
-
- /* Set the Fixed burst mode */
- if (dma_cfg->fixed_burst)
-@@ -122,9 +133,6 @@ static void dwmac4_dma_init(void __iomem
- value |= DMA_SYS_BUS_AAL;
-
- writel(value, ioaddr + DMA_SYS_BUS_MODE);
--
-- for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
-- dwmac4_dma_init_channel(ioaddr, dma_cfg, dma_tx, dma_rx, i);
- }
-
- static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel,
-@@ -174,46 +182,121 @@ static void dwmac4_dump_dma_regs(void __
- _dwmac4_dump_dma_regs(ioaddr, i, reg_space);
- }
-
--static void dwmac4_rx_watchdog(void __iomem *ioaddr, u32 riwt)
-+static void dwmac4_rx_watchdog(void __iomem *ioaddr, u32 riwt, u32 number_chan)
- {
-- int i;
-+ u32 chan;
-
-- for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
-- writel(riwt, ioaddr + DMA_CHAN_RX_WATCHDOG(i));
-+ for (chan = 0; chan < number_chan; chan++)
-+ writel(riwt, ioaddr + DMA_CHAN_RX_WATCHDOG(chan));
- }
-
--static void dwmac4_dma_chan_op_mode(void __iomem *ioaddr, int txmode,
-- int rxmode, u32 channel)
-+static void dwmac4_dma_rx_chan_op_mode(void __iomem *ioaddr, int mode,
-+ u32 channel, int fifosz)
- {
-- u32 mtl_tx_op, mtl_rx_op, mtl_rx_int;
-+ unsigned int rqs = fifosz / 256 - 1;
-+ u32 mtl_rx_op, mtl_rx_int;
-
-- /* Following code only done for channel 0, other channels not yet
-- * supported.
-- */
-- mtl_tx_op = readl(ioaddr + MTL_CHAN_TX_OP_MODE(channel));
-+ mtl_rx_op = readl(ioaddr + MTL_CHAN_RX_OP_MODE(channel));
-+
-+ if (mode == SF_DMA_MODE) {
-+ pr_debug("GMAC: enable RX store and forward mode\n");
-+ mtl_rx_op |= MTL_OP_MODE_RSF;
-+ } else {
-+ pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode);
-+ mtl_rx_op &= ~MTL_OP_MODE_RSF;
-+ mtl_rx_op &= MTL_OP_MODE_RTC_MASK;
-+ if (mode <= 32)
-+ mtl_rx_op |= MTL_OP_MODE_RTC_32;
-+ else if (mode <= 64)
-+ mtl_rx_op |= MTL_OP_MODE_RTC_64;
-+ else if (mode <= 96)
-+ mtl_rx_op |= MTL_OP_MODE_RTC_96;
-+ else
-+ mtl_rx_op |= MTL_OP_MODE_RTC_128;
-+ }
-+
-+ mtl_rx_op &= ~MTL_OP_MODE_RQS_MASK;
-+ mtl_rx_op |= rqs << MTL_OP_MODE_RQS_SHIFT;
-+
-+ /* enable flow control only if each channel gets 4 KiB or more FIFO */
-+ if (fifosz >= 4096) {
-+ unsigned int rfd, rfa;
-+
-+ mtl_rx_op |= MTL_OP_MODE_EHFC;
-+
-+ /* Set Threshold for Activating Flow Control to min 2 frames,
-+ * i.e. 1500 * 2 = 3000 bytes.
-+ *
-+ * Set Threshold for Deactivating Flow Control to min 1 frame,
-+ * i.e. 1500 bytes.
-+ */
-+ switch (fifosz) {
-+ case 4096:
-+ /* This violates the above formula because of FIFO size
-+ * limit therefore overflow may occur in spite of this.
-+ */
-+ rfd = 0x03; /* Full-2.5K */
-+ rfa = 0x01; /* Full-1.5K */
-+ break;
-+
-+ case 8192:
-+ rfd = 0x06; /* Full-4K */
-+ rfa = 0x0a; /* Full-6K */
-+ break;
-+
-+ case 16384:
-+ rfd = 0x06; /* Full-4K */
-+ rfa = 0x12; /* Full-10K */
-+ break;
-+
-+ default:
-+ rfd = 0x06; /* Full-4K */
-+ rfa = 0x1e; /* Full-16K */
-+ break;
-+ }
-
-- if (txmode == SF_DMA_MODE) {
-+ mtl_rx_op &= ~MTL_OP_MODE_RFD_MASK;
-+ mtl_rx_op |= rfd << MTL_OP_MODE_RFD_SHIFT;
-+
-+ mtl_rx_op &= ~MTL_OP_MODE_RFA_MASK;
-+ mtl_rx_op |= rfa << MTL_OP_MODE_RFA_SHIFT;
-+ }
-+
-+ writel(mtl_rx_op, ioaddr + MTL_CHAN_RX_OP_MODE(channel));
-+
-+ /* Enable MTL RX overflow */
-+ mtl_rx_int = readl(ioaddr + MTL_CHAN_INT_CTRL(channel));
-+ writel(mtl_rx_int | MTL_RX_OVERFLOW_INT_EN,
-+ ioaddr + MTL_CHAN_INT_CTRL(channel));
-+}
-+
-+static void dwmac4_dma_tx_chan_op_mode(void __iomem *ioaddr, int mode,
-+ u32 channel)
-+{
-+ u32 mtl_tx_op = readl(ioaddr + MTL_CHAN_TX_OP_MODE(channel));
-+
-+ if (mode == SF_DMA_MODE) {
- pr_debug("GMAC: enable TX store and forward mode\n");
- /* Transmit COE type 2 cannot be done in cut-through mode. */
- mtl_tx_op |= MTL_OP_MODE_TSF;
- } else {
-- pr_debug("GMAC: disabling TX SF (threshold %d)\n", txmode);
-+ pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode);
- mtl_tx_op &= ~MTL_OP_MODE_TSF;
- mtl_tx_op &= MTL_OP_MODE_TTC_MASK;
- /* Set the transmit threshold */
-- if (txmode <= 32)
-+ if (mode <= 32)
- mtl_tx_op |= MTL_OP_MODE_TTC_32;
-- else if (txmode <= 64)
-+ else if (mode <= 64)
- mtl_tx_op |= MTL_OP_MODE_TTC_64;
-- else if (txmode <= 96)
-+ else if (mode <= 96)
- mtl_tx_op |= MTL_OP_MODE_TTC_96;
-- else if (txmode <= 128)
-+ else if (mode <= 128)
- mtl_tx_op |= MTL_OP_MODE_TTC_128;
-- else if (txmode <= 192)
-+ else if (mode <= 192)
- mtl_tx_op |= MTL_OP_MODE_TTC_192;
-- else if (txmode <= 256)
-+ else if (mode <= 256)
- mtl_tx_op |= MTL_OP_MODE_TTC_256;
-- else if (txmode <= 384)
-+ else if (mode <= 384)
- mtl_tx_op |= MTL_OP_MODE_TTC_384;
- else
- mtl_tx_op |= MTL_OP_MODE_TTC_512;
-@@ -230,39 +313,6 @@ static void dwmac4_dma_chan_op_mode(void
- */
- mtl_tx_op |= MTL_OP_MODE_TXQEN | MTL_OP_MODE_TQS_MASK;
- writel(mtl_tx_op, ioaddr + MTL_CHAN_TX_OP_MODE(channel));
--
-- mtl_rx_op = readl(ioaddr + MTL_CHAN_RX_OP_MODE(channel));
--
-- if (rxmode == SF_DMA_MODE) {
-- pr_debug("GMAC: enable RX store and forward mode\n");
-- mtl_rx_op |= MTL_OP_MODE_RSF;
-- } else {
-- pr_debug("GMAC: disable RX SF mode (threshold %d)\n", rxmode);
-- mtl_rx_op &= ~MTL_OP_MODE_RSF;
-- mtl_rx_op &= MTL_OP_MODE_RTC_MASK;
-- if (rxmode <= 32)
-- mtl_rx_op |= MTL_OP_MODE_RTC_32;
-- else if (rxmode <= 64)
-- mtl_rx_op |= MTL_OP_MODE_RTC_64;
-- else if (rxmode <= 96)
-- mtl_rx_op |= MTL_OP_MODE_RTC_96;
-- else
-- mtl_rx_op |= MTL_OP_MODE_RTC_128;
-- }
--
-- writel(mtl_rx_op, ioaddr + MTL_CHAN_RX_OP_MODE(channel));
--
-- /* Enable MTL RX overflow */
-- mtl_rx_int = readl(ioaddr + MTL_CHAN_INT_CTRL(channel));
-- writel(mtl_rx_int | MTL_RX_OVERFLOW_INT_EN,
-- ioaddr + MTL_CHAN_INT_CTRL(channel));
--}
--
--static void dwmac4_dma_operation_mode(void __iomem *ioaddr, int txmode,
-- int rxmode, int rxfifosz)
--{
-- /* Only Channel 0 is actually configured and used */
-- dwmac4_dma_chan_op_mode(ioaddr, txmode, rxmode, 0);
- }
-
- static void dwmac4_get_hw_feature(void __iomem *ioaddr,
-@@ -294,6 +344,11 @@ static void dwmac4_get_hw_feature(void _
- hw_cap = readl(ioaddr + GMAC_HW_FEATURE1);
- dma_cap->av = (hw_cap & GMAC_HW_FEAT_AVSEL) >> 20;
- dma_cap->tsoen = (hw_cap & GMAC_HW_TSOEN) >> 18;
-+ /* RX and TX FIFO sizes are encoded as log2(n / 128). Undo that by
-+ * shifting and store the sizes in bytes.
-+ */
-+ dma_cap->tx_fifo_size = 128 << ((hw_cap & GMAC_HW_TXFIFOSIZE) >> 6);
-+ dma_cap->rx_fifo_size = 128 << ((hw_cap & GMAC_HW_RXFIFOSIZE) >> 0);
- /* MAC HW feature2 */
- hw_cap = readl(ioaddr + GMAC_HW_FEATURE2);
- /* TX and RX number of channels */
-@@ -332,9 +387,13 @@ static void dwmac4_enable_tso(void __iom
- const struct stmmac_dma_ops dwmac4_dma_ops = {
- .reset = dwmac4_dma_reset,
- .init = dwmac4_dma_init,
-+ .init_chan = dwmac4_dma_init_channel,
-+ .init_rx_chan = dwmac4_dma_init_rx_chan,
-+ .init_tx_chan = dwmac4_dma_init_tx_chan,
- .axi = dwmac4_dma_axi,
- .dump_regs = dwmac4_dump_dma_regs,
-- .dma_mode = dwmac4_dma_operation_mode,
-+ .dma_rx_mode = dwmac4_dma_rx_chan_op_mode,
-+ .dma_tx_mode = dwmac4_dma_tx_chan_op_mode,
- .enable_dma_irq = dwmac4_enable_dma_irq,
- .disable_dma_irq = dwmac4_disable_dma_irq,
- .start_tx = dwmac4_dma_start_tx,
-@@ -354,9 +413,13 @@ const struct stmmac_dma_ops dwmac4_dma_o
- const struct stmmac_dma_ops dwmac410_dma_ops = {
- .reset = dwmac4_dma_reset,
- .init = dwmac4_dma_init,
-+ .init_chan = dwmac4_dma_init_channel,
-+ .init_rx_chan = dwmac4_dma_init_rx_chan,
-+ .init_tx_chan = dwmac4_dma_init_tx_chan,
- .axi = dwmac4_dma_axi,
- .dump_regs = dwmac4_dump_dma_regs,
-- .dma_mode = dwmac4_dma_operation_mode,
-+ .dma_rx_mode = dwmac4_dma_rx_chan_op_mode,
-+ .dma_tx_mode = dwmac4_dma_tx_chan_op_mode,
- .enable_dma_irq = dwmac410_enable_dma_irq,
- .disable_dma_irq = dwmac4_disable_dma_irq,
- .start_tx = dwmac4_dma_start_tx,
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
-@@ -185,17 +185,17 @@
-
- int dwmac4_dma_reset(void __iomem *ioaddr);
- void dwmac4_enable_dma_transmission(void __iomem *ioaddr, u32 tail_ptr);
--void dwmac4_enable_dma_irq(void __iomem *ioaddr);
--void dwmac410_enable_dma_irq(void __iomem *ioaddr);
--void dwmac4_disable_dma_irq(void __iomem *ioaddr);
--void dwmac4_dma_start_tx(void __iomem *ioaddr);
--void dwmac4_dma_stop_tx(void __iomem *ioaddr);
--void dwmac4_dma_start_rx(void __iomem *ioaddr);
--void dwmac4_dma_stop_rx(void __iomem *ioaddr);
-+void dwmac4_enable_dma_irq(void __iomem *ioaddr, u32 chan);
-+void dwmac410_enable_dma_irq(void __iomem *ioaddr, u32 chan);
-+void dwmac4_disable_dma_irq(void __iomem *ioaddr, u32 chan);
-+void dwmac4_dma_start_tx(void __iomem *ioaddr, u32 chan);
-+void dwmac4_dma_stop_tx(void __iomem *ioaddr, u32 chan);
-+void dwmac4_dma_start_rx(void __iomem *ioaddr, u32 chan);
-+void dwmac4_dma_stop_rx(void __iomem *ioaddr, u32 chan);
- int dwmac4_dma_interrupt(void __iomem *ioaddr,
-- struct stmmac_extra_stats *x);
--void dwmac4_set_rx_ring_len(void __iomem *ioaddr, u32 len);
--void dwmac4_set_tx_ring_len(void __iomem *ioaddr, u32 len);
-+ struct stmmac_extra_stats *x, u32 chan);
-+void dwmac4_set_rx_ring_len(void __iomem *ioaddr, u32 len, u32 chan);
-+void dwmac4_set_tx_ring_len(void __iomem *ioaddr, u32 len, u32 chan);
- void dwmac4_set_rx_tail_ptr(void __iomem *ioaddr, u32 tail_ptr, u32 chan);
- void dwmac4_set_tx_tail_ptr(void __iomem *ioaddr, u32 tail_ptr, u32 chan);
-
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
-@@ -37,96 +37,96 @@ int dwmac4_dma_reset(void __iomem *ioadd
-
- void dwmac4_set_rx_tail_ptr(void __iomem *ioaddr, u32 tail_ptr, u32 chan)
- {
-- writel(tail_ptr, ioaddr + DMA_CHAN_RX_END_ADDR(0));
-+ writel(tail_ptr, ioaddr + DMA_CHAN_RX_END_ADDR(chan));
- }
-
- void dwmac4_set_tx_tail_ptr(void __iomem *ioaddr, u32 tail_ptr, u32 chan)
- {
-- writel(tail_ptr, ioaddr + DMA_CHAN_TX_END_ADDR(0));
-+ writel(tail_ptr, ioaddr + DMA_CHAN_TX_END_ADDR(chan));
- }
-
--void dwmac4_dma_start_tx(void __iomem *ioaddr)
-+void dwmac4_dma_start_tx(void __iomem *ioaddr, u32 chan)
- {
-- u32 value = readl(ioaddr + DMA_CHAN_TX_CONTROL(STMMAC_CHAN0));
-+ u32 value = readl(ioaddr + DMA_CHAN_TX_CONTROL(chan));
-
- value |= DMA_CONTROL_ST;
-- writel(value, ioaddr + DMA_CHAN_TX_CONTROL(STMMAC_CHAN0));
-+ writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
-
- value = readl(ioaddr + GMAC_CONFIG);
- value |= GMAC_CONFIG_TE;
- writel(value, ioaddr + GMAC_CONFIG);
- }
-
--void dwmac4_dma_stop_tx(void __iomem *ioaddr)
-+void dwmac4_dma_stop_tx(void __iomem *ioaddr, u32 chan)
- {
-- u32 value = readl(ioaddr + DMA_CHAN_TX_CONTROL(STMMAC_CHAN0));
-+ u32 value = readl(ioaddr + DMA_CHAN_TX_CONTROL(chan));
-
- value &= ~DMA_CONTROL_ST;
-- writel(value, ioaddr + DMA_CHAN_TX_CONTROL(STMMAC_CHAN0));
-+ writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
-
- value = readl(ioaddr + GMAC_CONFIG);
- value &= ~GMAC_CONFIG_TE;
- writel(value, ioaddr + GMAC_CONFIG);
- }
-
--void dwmac4_dma_start_rx(void __iomem *ioaddr)
-+void dwmac4_dma_start_rx(void __iomem *ioaddr, u32 chan)
- {
-- u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(STMMAC_CHAN0));
-+ u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan));
-
- value |= DMA_CONTROL_SR;
-
-- writel(value, ioaddr + DMA_CHAN_RX_CONTROL(STMMAC_CHAN0));
-+ writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
-
- value = readl(ioaddr + GMAC_CONFIG);
- value |= GMAC_CONFIG_RE;
- writel(value, ioaddr + GMAC_CONFIG);
- }
-
--void dwmac4_dma_stop_rx(void __iomem *ioaddr)
-+void dwmac4_dma_stop_rx(void __iomem *ioaddr, u32 chan)
- {
-- u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(STMMAC_CHAN0));
-+ u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan));
-
- value &= ~DMA_CONTROL_SR;
-- writel(value, ioaddr + DMA_CHAN_RX_CONTROL(STMMAC_CHAN0));
-+ writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
-
- value = readl(ioaddr + GMAC_CONFIG);
- value &= ~GMAC_CONFIG_RE;
- writel(value, ioaddr + GMAC_CONFIG);
- }
-
--void dwmac4_set_tx_ring_len(void __iomem *ioaddr, u32 len)
-+void dwmac4_set_tx_ring_len(void __iomem *ioaddr, u32 len, u32 chan)
- {
-- writel(len, ioaddr + DMA_CHAN_TX_RING_LEN(STMMAC_CHAN0));
-+ writel(len, ioaddr + DMA_CHAN_TX_RING_LEN(chan));
- }
-
--void dwmac4_set_rx_ring_len(void __iomem *ioaddr, u32 len)
-+void dwmac4_set_rx_ring_len(void __iomem *ioaddr, u32 len, u32 chan)
- {
-- writel(len, ioaddr + DMA_CHAN_RX_RING_LEN(STMMAC_CHAN0));
-+ writel(len, ioaddr + DMA_CHAN_RX_RING_LEN(chan));
- }
-
--void dwmac4_enable_dma_irq(void __iomem *ioaddr)
-+void dwmac4_enable_dma_irq(void __iomem *ioaddr, u32 chan)
- {
- writel(DMA_CHAN_INTR_DEFAULT_MASK, ioaddr +
-- DMA_CHAN_INTR_ENA(STMMAC_CHAN0));
-+ DMA_CHAN_INTR_ENA(chan));
- }
-
--void dwmac410_enable_dma_irq(void __iomem *ioaddr)
-+void dwmac410_enable_dma_irq(void __iomem *ioaddr, u32 chan)
- {
- writel(DMA_CHAN_INTR_DEFAULT_MASK_4_10,
-- ioaddr + DMA_CHAN_INTR_ENA(STMMAC_CHAN0));
-+ ioaddr + DMA_CHAN_INTR_ENA(chan));
- }
-
--void dwmac4_disable_dma_irq(void __iomem *ioaddr)
-+void dwmac4_disable_dma_irq(void __iomem *ioaddr, u32 chan)
- {
-- writel(0, ioaddr + DMA_CHAN_INTR_ENA(STMMAC_CHAN0));
-+ writel(0, ioaddr + DMA_CHAN_INTR_ENA(chan));
- }
-
- int dwmac4_dma_interrupt(void __iomem *ioaddr,
-- struct stmmac_extra_stats *x)
-+ struct stmmac_extra_stats *x, u32 chan)
- {
- int ret = 0;
-
-- u32 intr_status = readl(ioaddr + DMA_CHAN_STATUS(0));
-+ u32 intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan));
-
- /* ABNORMAL interrupts */
- if (unlikely(intr_status & DMA_CHAN_STATUS_AIS)) {
-@@ -153,7 +153,7 @@ int dwmac4_dma_interrupt(void __iomem *i
- if (likely(intr_status & DMA_CHAN_STATUS_RI)) {
- u32 value;
-
-- value = readl(ioaddr + DMA_CHAN_INTR_ENA(STMMAC_CHAN0));
-+ value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
- /* to schedule NAPI on real RIE event. */
- if (likely(value & DMA_CHAN_INTR_ENA_RIE)) {
- x->rx_normal_irq_n++;
-@@ -172,7 +172,7 @@ int dwmac4_dma_interrupt(void __iomem *i
- * status [21-0] expect reserved bits [5-3]
- */
- writel((intr_status & 0x3fffc7),
-- ioaddr + DMA_CHAN_STATUS(STMMAC_CHAN0));
-+ ioaddr + DMA_CHAN_STATUS(chan));
-
- return ret;
- }
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
-@@ -137,13 +137,14 @@
- #define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */
-
- void dwmac_enable_dma_transmission(void __iomem *ioaddr);
--void dwmac_enable_dma_irq(void __iomem *ioaddr);
--void dwmac_disable_dma_irq(void __iomem *ioaddr);
--void dwmac_dma_start_tx(void __iomem *ioaddr);
--void dwmac_dma_stop_tx(void __iomem *ioaddr);
--void dwmac_dma_start_rx(void __iomem *ioaddr);
--void dwmac_dma_stop_rx(void __iomem *ioaddr);
--int dwmac_dma_interrupt(void __iomem *ioaddr, struct stmmac_extra_stats *x);
-+void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan);
-+void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan);
-+void dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan);
-+void dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan);
-+void dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan);
-+void dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan);
-+int dwmac_dma_interrupt(void __iomem *ioaddr, struct stmmac_extra_stats *x,
-+ u32 chan);
- int dwmac_dma_reset(void __iomem *ioaddr);
-
- #endif /* __DWMAC_DMA_H__ */
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
-@@ -47,38 +47,38 @@ void dwmac_enable_dma_transmission(void
- writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
- }
-
--void dwmac_enable_dma_irq(void __iomem *ioaddr)
-+void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan)
- {
- writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
- }
-
--void dwmac_disable_dma_irq(void __iomem *ioaddr)
-+void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan)
- {
- writel(0, ioaddr + DMA_INTR_ENA);
- }
-
--void dwmac_dma_start_tx(void __iomem *ioaddr)
-+void dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan)
- {
- u32 value = readl(ioaddr + DMA_CONTROL);
- value |= DMA_CONTROL_ST;
- writel(value, ioaddr + DMA_CONTROL);
- }
-
--void dwmac_dma_stop_tx(void __iomem *ioaddr)
-+void dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan)
- {
- u32 value = readl(ioaddr + DMA_CONTROL);
- value &= ~DMA_CONTROL_ST;
- writel(value, ioaddr + DMA_CONTROL);
- }
-
--void dwmac_dma_start_rx(void __iomem *ioaddr)
-+void dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan)
- {
- u32 value = readl(ioaddr + DMA_CONTROL);
- value |= DMA_CONTROL_SR;
- writel(value, ioaddr + DMA_CONTROL);
- }
-
--void dwmac_dma_stop_rx(void __iomem *ioaddr)
-+void dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan)
- {
- u32 value = readl(ioaddr + DMA_CONTROL);
- value &= ~DMA_CONTROL_SR;
-@@ -156,7 +156,7 @@ static void show_rx_process_state(unsign
- #endif
-
- int dwmac_dma_interrupt(void __iomem *ioaddr,
-- struct stmmac_extra_stats *x)
-+ struct stmmac_extra_stats *x, u32 chan)
- {
- int ret = 0;
- /* read the status register (CSR5) */
---- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
-@@ -315,7 +315,7 @@ static void enh_desc_release_tx_desc(str
-
- static void enh_desc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
- bool csum_flag, int mode, bool tx_own,
-- bool ls)
-+ bool ls, unsigned int tot_pkt_len)
- {
- unsigned int tdes0 = le32_to_cpu(p->des0);
-
---- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
-@@ -191,7 +191,7 @@ static void ndesc_release_tx_desc(struct
-
- static void ndesc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
- bool csum_flag, int mode, bool tx_own,
-- bool ls)
-+ bool ls, unsigned int tot_pkt_len)
- {
- unsigned int tdes1 = le32_to_cpu(p->des1);
-
---- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
-@@ -26,16 +26,17 @@
-
- static int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum)
- {
-- struct stmmac_priv *priv = (struct stmmac_priv *)p;
-- unsigned int entry = priv->cur_tx;
-- struct dma_desc *desc;
-+ struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)p;
- unsigned int nopaged_len = skb_headlen(skb);
-+ struct stmmac_priv *priv = tx_q->priv_data;
-+ unsigned int entry = tx_q->cur_tx;
- unsigned int bmax, len, des2;
-+ struct dma_desc *desc;
-
- if (priv->extend_desc)
-- desc = (struct dma_desc *)(priv->dma_etx + entry);
-+ desc = (struct dma_desc *)(tx_q->dma_etx + entry);
- else
-- desc = priv->dma_tx + entry;
-+ desc = tx_q->dma_tx + entry;
-
- if (priv->plat->enh_desc)
- bmax = BUF_SIZE_8KiB;
-@@ -52,48 +53,51 @@ static int stmmac_jumbo_frm(void *p, str
- if (dma_mapping_error(priv->device, des2))
- return -1;
-
-- priv->tx_skbuff_dma[entry].buf = des2;
-- priv->tx_skbuff_dma[entry].len = bmax;
-- priv->tx_skbuff_dma[entry].is_jumbo = true;
-+ tx_q->tx_skbuff_dma[entry].buf = des2;
-+ tx_q->tx_skbuff_dma[entry].len = bmax;
-+ tx_q->tx_skbuff_dma[entry].is_jumbo = true;
-
- desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
- priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum,
-- STMMAC_RING_MODE, 0, false);
-- priv->tx_skbuff[entry] = NULL;
-+ STMMAC_RING_MODE, 0,
-+ false, skb->len);
-+ tx_q->tx_skbuff[entry] = NULL;
- entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
-
- if (priv->extend_desc)
-- desc = (struct dma_desc *)(priv->dma_etx + entry);
-+ desc = (struct dma_desc *)(tx_q->dma_etx + entry);
- else
-- desc = priv->dma_tx + entry;
-+ desc = tx_q->dma_tx + entry;
-
- des2 = dma_map_single(priv->device, skb->data + bmax, len,
- DMA_TO_DEVICE);
- desc->des2 = cpu_to_le32(des2);
- if (dma_mapping_error(priv->device, des2))
- return -1;
-- priv->tx_skbuff_dma[entry].buf = des2;
-- priv->tx_skbuff_dma[entry].len = len;
-- priv->tx_skbuff_dma[entry].is_jumbo = true;
-+ tx_q->tx_skbuff_dma[entry].buf = des2;
-+ tx_q->tx_skbuff_dma[entry].len = len;
-+ tx_q->tx_skbuff_dma[entry].is_jumbo = true;
-
- desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
- priv->hw->desc->prepare_tx_desc(desc, 0, len, csum,
-- STMMAC_RING_MODE, 1, true);
-+ STMMAC_RING_MODE, 1,
-+ true, skb->len);
- } else {
- des2 = dma_map_single(priv->device, skb->data,
- nopaged_len, DMA_TO_DEVICE);
- desc->des2 = cpu_to_le32(des2);
- if (dma_mapping_error(priv->device, des2))
- return -1;
-- priv->tx_skbuff_dma[entry].buf = des2;
-- priv->tx_skbuff_dma[entry].len = nopaged_len;
-- priv->tx_skbuff_dma[entry].is_jumbo = true;
-+ tx_q->tx_skbuff_dma[entry].buf = des2;
-+ tx_q->tx_skbuff_dma[entry].len = nopaged_len;
-+ tx_q->tx_skbuff_dma[entry].is_jumbo = true;
- desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
- priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len, csum,
-- STMMAC_RING_MODE, 0, true);
-+ STMMAC_RING_MODE, 0,
-+ true, skb->len);
- }
-
-- priv->cur_tx = entry;
-+ tx_q->cur_tx = entry;
-
- return entry;
- }
-@@ -125,12 +129,13 @@ static void stmmac_init_desc3(struct dma
-
- static void stmmac_clean_desc3(void *priv_ptr, struct dma_desc *p)
- {
-- struct stmmac_priv *priv = (struct stmmac_priv *)priv_ptr;
-- unsigned int entry = priv->dirty_tx;
-+ struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)priv_ptr;
-+ struct stmmac_priv *priv = tx_q->priv_data;
-+ unsigned int entry = tx_q->dirty_tx;
-
- /* des3 is only used for jumbo frames tx or time stamping */
-- if (unlikely(priv->tx_skbuff_dma[entry].is_jumbo ||
-- (priv->tx_skbuff_dma[entry].last_segment &&
-+ if (unlikely(tx_q->tx_skbuff_dma[entry].is_jumbo ||
-+ (tx_q->tx_skbuff_dma[entry].last_segment &&
- !priv->extend_desc && priv->hwts_tx_en)))
- p->des3 = 0;
- }
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-@@ -46,38 +46,51 @@ struct stmmac_tx_info {
- bool is_jumbo;
- };
-
--struct stmmac_priv {
-- /* Frequently used values are kept adjacent for cache effect */
-+/* Frequently used values are kept adjacent for cache effect */
-+struct stmmac_tx_queue {
-+ u32 queue_index;
-+ struct stmmac_priv *priv_data;
- struct dma_extended_desc *dma_etx ____cacheline_aligned_in_smp;
- struct dma_desc *dma_tx;
- struct sk_buff **tx_skbuff;
-+ struct stmmac_tx_info *tx_skbuff_dma;
- unsigned int cur_tx;
- unsigned int dirty_tx;
-+ dma_addr_t dma_tx_phy;
-+ u32 tx_tail_addr;
-+};
-+
-+struct stmmac_rx_queue {
-+ u32 queue_index;
-+ struct stmmac_priv *priv_data;
-+ struct dma_extended_desc *dma_erx;
-+ struct dma_desc *dma_rx ____cacheline_aligned_in_smp;
-+ struct sk_buff **rx_skbuff;
-+ dma_addr_t *rx_skbuff_dma;
-+ unsigned int cur_rx;
-+ unsigned int dirty_rx;
-+ u32 rx_zeroc_thresh;
-+ dma_addr_t dma_rx_phy;
-+ u32 rx_tail_addr;
-+ struct napi_struct napi ____cacheline_aligned_in_smp;
-+};
-+
-+struct stmmac_priv {
-+ /* Frequently used values are kept adjacent for cache effect */
- u32 tx_count_frames;
- u32 tx_coal_frames;
- u32 tx_coal_timer;
-- struct stmmac_tx_info *tx_skbuff_dma;
-- dma_addr_t dma_tx_phy;
-+
- int tx_coalesce;
- int hwts_tx_en;
- bool tx_path_in_lpi_mode;
- struct timer_list txtimer;
- bool tso;
-
-- struct dma_desc *dma_rx ____cacheline_aligned_in_smp;
-- struct dma_extended_desc *dma_erx;
-- struct sk_buff **rx_skbuff;
-- unsigned int cur_rx;
-- unsigned int dirty_rx;
- unsigned int dma_buf_sz;
- unsigned int rx_copybreak;
-- unsigned int rx_zeroc_thresh;
- u32 rx_riwt;
- int hwts_rx_en;
-- dma_addr_t *rx_skbuff_dma;
-- dma_addr_t dma_rx_phy;
--
-- struct napi_struct napi ____cacheline_aligned_in_smp;
-
- void __iomem *ioaddr;
- struct net_device *dev;
-@@ -85,6 +98,12 @@ struct stmmac_priv {
- struct mac_device_info *hw;
- spinlock_t lock;
-
-+ /* RX Queue */
-+ struct stmmac_rx_queue rx_queue[MTL_MAX_RX_QUEUES];
-+
-+ /* TX Queue */
-+ struct stmmac_tx_queue tx_queue[MTL_MAX_TX_QUEUES];
-+
- int oldlink;
- int speed;
- int oldduplex;
-@@ -119,8 +138,6 @@ struct stmmac_priv {
- spinlock_t ptp_lock;
- void __iomem *mmcaddr;
- void __iomem *ptpaddr;
-- u32 rx_tail_addr;
-- u32 tx_tail_addr;
- u32 mss;
-
- #ifdef CONFIG_DEBUG_FS
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
-@@ -481,6 +481,7 @@ stmmac_set_pauseparam(struct net_device
- struct ethtool_pauseparam *pause)
- {
- struct stmmac_priv *priv = netdev_priv(netdev);
-+ u32 tx_cnt = priv->plat->tx_queues_to_use;
- struct phy_device *phy = netdev->phydev;
- int new_pause = FLOW_OFF;
-
-@@ -511,7 +512,7 @@ stmmac_set_pauseparam(struct net_device
- }
-
- priv->hw->mac->flow_ctrl(priv->hw, phy->duplex, priv->flow_ctrl,
-- priv->pause);
-+ priv->pause, tx_cnt);
- return 0;
- }
-
-@@ -519,6 +520,8 @@ static void stmmac_get_ethtool_stats(str
- struct ethtool_stats *dummy, u64 *data)
- {
- struct stmmac_priv *priv = netdev_priv(dev);
-+ u32 rx_queues_count = priv->plat->rx_queues_to_use;
-+ u32 tx_queues_count = priv->plat->tx_queues_to_use;
- int i, j = 0;
-
- /* Update the DMA HW counters for dwmac10/100 */
-@@ -549,7 +552,8 @@ static void stmmac_get_ethtool_stats(str
- if ((priv->hw->mac->debug) &&
- (priv->synopsys_id >= DWMAC_CORE_3_50))
- priv->hw->mac->debug(priv->ioaddr,
-- (void *)&priv->xstats);
-+ (void *)&priv->xstats,
-+ rx_queues_count, tx_queues_count);
- }
- for (i = 0; i < STMMAC_STATS_LEN; i++) {
- char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset;
-@@ -726,6 +730,7 @@ static int stmmac_set_coalesce(struct ne
- struct ethtool_coalesce *ec)
- {
- struct stmmac_priv *priv = netdev_priv(dev);
-+ u32 rx_cnt = priv->plat->rx_queues_to_use;
- unsigned int rx_riwt;
-
- /* Check not supported parameters */
-@@ -764,7 +769,7 @@ static int stmmac_set_coalesce(struct ne
- priv->tx_coal_frames = ec->tx_max_coalesced_frames;
- priv->tx_coal_timer = ec->tx_coalesce_usecs;
- priv->rx_riwt = rx_riwt;
-- priv->hw->dma->rx_watchdog(priv->ioaddr, priv->rx_riwt);
-+ priv->hw->dma->rx_watchdog(priv->ioaddr, priv->rx_riwt, rx_cnt);
-
- return 0;
- }
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -139,6 +139,64 @@ static void stmmac_verify_args(void)
- }
-
- /**
-+ * stmmac_disable_all_queues - Disable all queues
-+ * @priv: driver private structure
-+ */
-+static void stmmac_disable_all_queues(struct stmmac_priv *priv)
-+{
-+ u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
-+ u32 queue;
-+
-+ for (queue = 0; queue < rx_queues_cnt; queue++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+
-+ napi_disable(&rx_q->napi);
-+ }
-+}
-+
-+/**
-+ * stmmac_enable_all_queues - Enable all queues
-+ * @priv: driver private structure
-+ */
-+static void stmmac_enable_all_queues(struct stmmac_priv *priv)
-+{
-+ u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
-+ u32 queue;
-+
-+ for (queue = 0; queue < rx_queues_cnt; queue++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+
-+ napi_enable(&rx_q->napi);
-+ }
-+}
-+
-+/**
-+ * stmmac_stop_all_queues - Stop all queues
-+ * @priv: driver private structure
-+ */
-+static void stmmac_stop_all_queues(struct stmmac_priv *priv)
-+{
-+ u32 tx_queues_cnt = priv->plat->tx_queues_to_use;
-+ u32 queue;
-+
-+ for (queue = 0; queue < tx_queues_cnt; queue++)
-+ netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, queue));
-+}
-+
-+/**
-+ * stmmac_start_all_queues - Start all queues
-+ * @priv: driver private structure
-+ */
-+static void stmmac_start_all_queues(struct stmmac_priv *priv)
-+{
-+ u32 tx_queues_cnt = priv->plat->tx_queues_to_use;
-+ u32 queue;
-+
-+ for (queue = 0; queue < tx_queues_cnt; queue++)
-+ netif_tx_start_queue(netdev_get_tx_queue(priv->dev, queue));
-+}
-+
-+/**
- * stmmac_clk_csr_set - dynamically set the MDC clock
- * @priv: driver private structure
- * Description: this is to dynamically set the MDC clock according to the csr
-@@ -185,26 +243,33 @@ static void print_pkt(unsigned char *buf
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
- }
-
--static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
-+static inline u32 stmmac_tx_avail(struct stmmac_priv *priv, u32 queue)
- {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
- u32 avail;
-
-- if (priv->dirty_tx > priv->cur_tx)
-- avail = priv->dirty_tx - priv->cur_tx - 1;
-+ if (tx_q->dirty_tx > tx_q->cur_tx)
-+ avail = tx_q->dirty_tx - tx_q->cur_tx - 1;
- else
-- avail = DMA_TX_SIZE - priv->cur_tx + priv->dirty_tx - 1;
-+ avail = DMA_TX_SIZE - tx_q->cur_tx + tx_q->dirty_tx - 1;
-
- return avail;
- }
-
--static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv)
-+/**
-+ * stmmac_rx_dirty - Get RX queue dirty
-+ * @priv: driver private structure
-+ * @queue: RX queue index
-+ */
-+static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv, u32 queue)
- {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
- u32 dirty;
-
-- if (priv->dirty_rx <= priv->cur_rx)
-- dirty = priv->cur_rx - priv->dirty_rx;
-+ if (rx_q->dirty_rx <= rx_q->cur_rx)
-+ dirty = rx_q->cur_rx - rx_q->dirty_rx;
- else
-- dirty = DMA_RX_SIZE - priv->dirty_rx + priv->cur_rx;
-+ dirty = DMA_RX_SIZE - rx_q->dirty_rx + rx_q->cur_rx;
-
- return dirty;
- }
-@@ -232,9 +297,19 @@ static inline void stmmac_hw_fix_mac_spe
- */
- static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
- {
-+ u32 tx_cnt = priv->plat->tx_queues_to_use;
-+ u32 queue;
-+
-+ /* check if all TX queues have the work finished */
-+ for (queue = 0; queue < tx_cnt; queue++) {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
-+
-+ if (tx_q->dirty_tx != tx_q->cur_tx)
-+ return; /* still unfinished work */
-+ }
-+
- /* Check and enter in LPI mode */
-- if ((priv->dirty_tx == priv->cur_tx) &&
-- (priv->tx_path_in_lpi_mode == false))
-+ if (!priv->tx_path_in_lpi_mode)
- priv->hw->mac->set_eee_mode(priv->hw,
- priv->plat->en_tx_lpi_clockgating);
- }
-@@ -365,14 +440,14 @@ static void stmmac_get_tx_hwtstamp(struc
- return;
-
- /* check tx tstamp status */
-- if (!priv->hw->desc->get_tx_timestamp_status(p)) {
-+ if (priv->hw->desc->get_tx_timestamp_status(p)) {
- /* get the valid tstamp */
- ns = priv->hw->desc->get_timestamp(p, priv->adv_ts);
-
- memset(&shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps));
- shhwtstamp.hwtstamp = ns_to_ktime(ns);
-
-- netdev_info(priv->dev, "get valid TX hw timestamp %llu\n", ns);
-+ netdev_dbg(priv->dev, "get valid TX hw timestamp %llu\n", ns);
- /* pass tstamp to stack */
- skb_tstamp_tx(skb, &shhwtstamp);
- }
-@@ -399,19 +474,19 @@ static void stmmac_get_rx_hwtstamp(struc
- return;
-
- /* Check if timestamp is available */
-- if (!priv->hw->desc->get_rx_timestamp_status(p, priv->adv_ts)) {
-+ if (priv->hw->desc->get_rx_timestamp_status(p, priv->adv_ts)) {
- /* For GMAC4, the valid timestamp is from CTX next desc. */
- if (priv->plat->has_gmac4)
- ns = priv->hw->desc->get_timestamp(np, priv->adv_ts);
- else
- ns = priv->hw->desc->get_timestamp(p, priv->adv_ts);
-
-- netdev_info(priv->dev, "get valid RX hw timestamp %llu\n", ns);
-+ netdev_dbg(priv->dev, "get valid RX hw timestamp %llu\n", ns);
- shhwtstamp = skb_hwtstamps(skb);
- memset(shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps));
- shhwtstamp->hwtstamp = ns_to_ktime(ns);
- } else {
-- netdev_err(priv->dev, "cannot get RX hw timestamp\n");
-+ netdev_dbg(priv->dev, "cannot get RX hw timestamp\n");
- }
- }
-
-@@ -688,6 +763,19 @@ static void stmmac_release_ptp(struct st
- }
-
- /**
-+ * stmmac_mac_flow_ctrl - Configure flow control in all queues
-+ * @priv: driver private structure
-+ * Description: It is used for configuring the flow control in all queues
-+ */
-+static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
-+{
-+ u32 tx_cnt = priv->plat->tx_queues_to_use;
-+
-+ priv->hw->mac->flow_ctrl(priv->hw, duplex, priv->flow_ctrl,
-+ priv->pause, tx_cnt);
-+}
-+
-+/**
- * stmmac_adjust_link - adjusts the link parameters
- * @dev: net device structure
- * Description: this is the helper called by the physical abstraction layer
-@@ -702,7 +790,6 @@ static void stmmac_adjust_link(struct ne
- struct phy_device *phydev = dev->phydev;
- unsigned long flags;
- int new_state = 0;
-- unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
-
- if (!phydev)
- return;
-@@ -724,8 +811,7 @@ static void stmmac_adjust_link(struct ne
- }
- /* Flow Control operation */
- if (phydev->pause)
-- priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex,
-- fc, pause_time);
-+ stmmac_mac_flow_ctrl(priv, phydev->duplex);
-
- if (phydev->speed != priv->speed) {
- new_state = 1;
-@@ -893,22 +979,56 @@ static int stmmac_init_phy(struct net_de
- return 0;
- }
-
--static void stmmac_display_rings(struct stmmac_priv *priv)
-+static void stmmac_display_rx_rings(struct stmmac_priv *priv)
- {
-- void *head_rx, *head_tx;
-+ u32 rx_cnt = priv->plat->rx_queues_to_use;
-+ void *head_rx;
-+ u32 queue;
-
-- if (priv->extend_desc) {
-- head_rx = (void *)priv->dma_erx;
-- head_tx = (void *)priv->dma_etx;
-- } else {
-- head_rx = (void *)priv->dma_rx;
-- head_tx = (void *)priv->dma_tx;
-+ /* Display RX rings */
-+ for (queue = 0; queue < rx_cnt; queue++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+
-+ pr_info("\tRX Queue %u rings\n", queue);
-+
-+ if (priv->extend_desc)
-+ head_rx = (void *)rx_q->dma_erx;
-+ else
-+ head_rx = (void *)rx_q->dma_rx;
-+
-+ /* Display RX ring */
-+ priv->hw->desc->display_ring(head_rx, DMA_RX_SIZE, true);
-+ }
-+}
-+
-+static void stmmac_display_tx_rings(struct stmmac_priv *priv)
-+{
-+ u32 tx_cnt = priv->plat->tx_queues_to_use;
-+ void *head_tx;
-+ u32 queue;
-+
-+ /* Display TX rings */
-+ for (queue = 0; queue < tx_cnt; queue++) {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
-+
-+ pr_info("\tTX Queue %d rings\n", queue);
-+
-+ if (priv->extend_desc)
-+ head_tx = (void *)tx_q->dma_etx;
-+ else
-+ head_tx = (void *)tx_q->dma_tx;
-+
-+ priv->hw->desc->display_ring(head_tx, DMA_TX_SIZE, false);
- }
-+}
-+
-+static void stmmac_display_rings(struct stmmac_priv *priv)
-+{
-+ /* Display RX ring */
-+ stmmac_display_rx_rings(priv);
-
-- /* Display Rx ring */
-- priv->hw->desc->display_ring(head_rx, DMA_RX_SIZE, true);
-- /* Display Tx ring */
-- priv->hw->desc->display_ring(head_tx, DMA_TX_SIZE, false);
-+ /* Display TX ring */
-+ stmmac_display_tx_rings(priv);
- }
-
- static int stmmac_set_bfsize(int mtu, int bufsize)
-@@ -928,48 +1048,88 @@ static int stmmac_set_bfsize(int mtu, in
- }
-
- /**
-- * stmmac_clear_descriptors - clear descriptors
-+ * stmmac_clear_rx_descriptors - clear RX descriptors
- * @priv: driver private structure
-- * Description: this function is called to clear the tx and rx descriptors
-+ * @queue: RX queue index
-+ * Description: this function is called to clear the RX descriptors
- * in case of both basic and extended descriptors are used.
- */
--static void stmmac_clear_descriptors(struct stmmac_priv *priv)
-+static void stmmac_clear_rx_descriptors(struct stmmac_priv *priv, u32 queue)
- {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
- int i;
-
-- /* Clear the Rx/Tx descriptors */
-+ /* Clear the RX descriptors */
- for (i = 0; i < DMA_RX_SIZE; i++)
- if (priv->extend_desc)
-- priv->hw->desc->init_rx_desc(&priv->dma_erx[i].basic,
-+ priv->hw->desc->init_rx_desc(&rx_q->dma_erx[i].basic,
- priv->use_riwt, priv->mode,
- (i == DMA_RX_SIZE - 1));
- else
-- priv->hw->desc->init_rx_desc(&priv->dma_rx[i],
-+ priv->hw->desc->init_rx_desc(&rx_q->dma_rx[i],
- priv->use_riwt, priv->mode,
- (i == DMA_RX_SIZE - 1));
-+}
-+
-+/**
-+ * stmmac_clear_tx_descriptors - clear tx descriptors
-+ * @priv: driver private structure
-+ * @queue: TX queue index.
-+ * Description: this function is called to clear the TX descriptors
-+ * in case of both basic and extended descriptors are used.
-+ */
-+static void stmmac_clear_tx_descriptors(struct stmmac_priv *priv, u32 queue)
-+{
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
-+ int i;
-+
-+ /* Clear the TX descriptors */
- for (i = 0; i < DMA_TX_SIZE; i++)
- if (priv->extend_desc)
-- priv->hw->desc->init_tx_desc(&priv->dma_etx[i].basic,
-+ priv->hw->desc->init_tx_desc(&tx_q->dma_etx[i].basic,
- priv->mode,
- (i == DMA_TX_SIZE - 1));
- else
-- priv->hw->desc->init_tx_desc(&priv->dma_tx[i],
-+ priv->hw->desc->init_tx_desc(&tx_q->dma_tx[i],
- priv->mode,
- (i == DMA_TX_SIZE - 1));
- }
-
- /**
-+ * stmmac_clear_descriptors - clear descriptors
-+ * @priv: driver private structure
-+ * Description: this function is called to clear the TX and RX descriptors
-+ * in case of both basic and extended descriptors are used.
-+ */
-+static void stmmac_clear_descriptors(struct stmmac_priv *priv)
-+{
-+ u32 rx_queue_cnt = priv->plat->rx_queues_to_use;
-+ u32 tx_queue_cnt = priv->plat->tx_queues_to_use;
-+ u32 queue;
-+
-+ /* Clear the RX descriptors */
-+ for (queue = 0; queue < rx_queue_cnt; queue++)
-+ stmmac_clear_rx_descriptors(priv, queue);
-+
-+ /* Clear the TX descriptors */
-+ for (queue = 0; queue < tx_queue_cnt; queue++)
-+ stmmac_clear_tx_descriptors(priv, queue);
-+}
-+
-+/**
- * stmmac_init_rx_buffers - init the RX descriptor buffer.
- * @priv: driver private structure
- * @p: descriptor pointer
- * @i: descriptor index
-- * @flags: gfp flag.
-+ * @flags: gfp flag
-+ * @queue: RX queue index
- * Description: this function is called to allocate a receive buffer, perform
- * the DMA mapping and init the descriptor.
- */
- static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
-- int i, gfp_t flags)
-+ int i, gfp_t flags, u32 queue)
- {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
- struct sk_buff *skb;
-
- skb = __netdev_alloc_skb_ip_align(priv->dev, priv->dma_buf_sz, flags);
-@@ -978,20 +1138,20 @@ static int stmmac_init_rx_buffers(struct
- "%s: Rx init fails; skb is NULL\n", __func__);
- return -ENOMEM;
- }
-- priv->rx_skbuff[i] = skb;
-- priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
-+ rx_q->rx_skbuff[i] = skb;
-+ rx_q->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
- priv->dma_buf_sz,
- DMA_FROM_DEVICE);
-- if (dma_mapping_error(priv->device, priv->rx_skbuff_dma[i])) {
-+ if (dma_mapping_error(priv->device, rx_q->rx_skbuff_dma[i])) {
- netdev_err(priv->dev, "%s: DMA mapping error\n", __func__);
- dev_kfree_skb_any(skb);
- return -EINVAL;
- }
-
- if (priv->synopsys_id >= DWMAC_CORE_4_00)
-- p->des0 = cpu_to_le32(priv->rx_skbuff_dma[i]);
-+ p->des0 = cpu_to_le32(rx_q->rx_skbuff_dma[i]);
- else
-- p->des2 = cpu_to_le32(priv->rx_skbuff_dma[i]);
-+ p->des2 = cpu_to_le32(rx_q->rx_skbuff_dma[i]);
-
- if ((priv->hw->mode->init_desc3) &&
- (priv->dma_buf_sz == BUF_SIZE_16KiB))
-@@ -1000,30 +1160,71 @@ static int stmmac_init_rx_buffers(struct
- return 0;
- }
-
--static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i)
-+/**
-+ * stmmac_free_rx_buffer - free RX dma buffers
-+ * @priv: private structure
-+ * @queue: RX queue index
-+ * @i: buffer index.
-+ */
-+static void stmmac_free_rx_buffer(struct stmmac_priv *priv, u32 queue, int i)
- {
-- if (priv->rx_skbuff[i]) {
-- dma_unmap_single(priv->device, priv->rx_skbuff_dma[i],
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+
-+ if (rx_q->rx_skbuff[i]) {
-+ dma_unmap_single(priv->device, rx_q->rx_skbuff_dma[i],
- priv->dma_buf_sz, DMA_FROM_DEVICE);
-- dev_kfree_skb_any(priv->rx_skbuff[i]);
-+ dev_kfree_skb_any(rx_q->rx_skbuff[i]);
- }
-- priv->rx_skbuff[i] = NULL;
-+ rx_q->rx_skbuff[i] = NULL;
- }
-
- /**
-- * init_dma_desc_rings - init the RX/TX descriptor rings
-+ * stmmac_free_tx_buffer - free RX dma buffers
-+ * @priv: private structure
-+ * @queue: RX queue index
-+ * @i: buffer index.
-+ */
-+static void stmmac_free_tx_buffer(struct stmmac_priv *priv, u32 queue, int i)
-+{
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
-+
-+ if (tx_q->tx_skbuff_dma[i].buf) {
-+ if (tx_q->tx_skbuff_dma[i].map_as_page)
-+ dma_unmap_page(priv->device,
-+ tx_q->tx_skbuff_dma[i].buf,
-+ tx_q->tx_skbuff_dma[i].len,
-+ DMA_TO_DEVICE);
-+ else
-+ dma_unmap_single(priv->device,
-+ tx_q->tx_skbuff_dma[i].buf,
-+ tx_q->tx_skbuff_dma[i].len,
-+ DMA_TO_DEVICE);
-+ }
-+
-+ if (tx_q->tx_skbuff[i]) {
-+ dev_kfree_skb_any(tx_q->tx_skbuff[i]);
-+ tx_q->tx_skbuff[i] = NULL;
-+ tx_q->tx_skbuff_dma[i].buf = 0;
-+ tx_q->tx_skbuff_dma[i].map_as_page = false;
-+ }
-+}
-+
-+/**
-+ * init_dma_rx_desc_rings - init the RX descriptor rings
- * @dev: net device structure
- * @flags: gfp flag.
-- * Description: this function initializes the DMA RX/TX descriptors
-+ * Description: this function initializes the DMA RX descriptors
- * and allocates the socket buffers. It supports the chained and ring
- * modes.
- */
--static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
-+static int init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags)
- {
-- int i;
- struct stmmac_priv *priv = netdev_priv(dev);
-+ u32 rx_count = priv->plat->rx_queues_to_use;
- unsigned int bfsize = 0;
- int ret = -ENOMEM;
-+ int queue;
-+ int i;
-
- if (priv->hw->mode->set_16kib_bfsize)
- bfsize = priv->hw->mode->set_16kib_bfsize(dev->mtu);
-@@ -1033,235 +1234,409 @@ static int init_dma_desc_rings(struct ne
-
- priv->dma_buf_sz = bfsize;
-
-- netif_dbg(priv, probe, priv->dev,
-- "(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n",
-- __func__, (u32)priv->dma_rx_phy, (u32)priv->dma_tx_phy);
--
- /* RX INITIALIZATION */
- netif_dbg(priv, probe, priv->dev,
- "SKB addresses:\nskb\t\tskb data\tdma data\n");
-
-- for (i = 0; i < DMA_RX_SIZE; i++) {
-- struct dma_desc *p;
-- if (priv->extend_desc)
-- p = &((priv->dma_erx + i)->basic);
-- else
-- p = priv->dma_rx + i;
-+ for (queue = 0; queue < rx_count; queue++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-
-- ret = stmmac_init_rx_buffers(priv, p, i, flags);
-- if (ret)
-- goto err_init_rx_buffers;
-+ netif_dbg(priv, probe, priv->dev,
-+ "(%s) dma_rx_phy=0x%08x\n", __func__,
-+ (u32)rx_q->dma_rx_phy);
-
-- netif_dbg(priv, probe, priv->dev, "[%p]\t[%p]\t[%x]\n",
-- priv->rx_skbuff[i], priv->rx_skbuff[i]->data,
-- (unsigned int)priv->rx_skbuff_dma[i]);
-+ for (i = 0; i < DMA_RX_SIZE; i++) {
-+ struct dma_desc *p;
-+
-+ if (priv->extend_desc)
-+ p = &((rx_q->dma_erx + i)->basic);
-+ else
-+ p = rx_q->dma_rx + i;
-+
-+ ret = stmmac_init_rx_buffers(priv, p, i, flags,
-+ queue);
-+ if (ret)
-+ goto err_init_rx_buffers;
-+
-+ netif_dbg(priv, probe, priv->dev, "[%p]\t[%p]\t[%x]\n",
-+ rx_q->rx_skbuff[i], rx_q->rx_skbuff[i]->data,
-+ (unsigned int)rx_q->rx_skbuff_dma[i]);
-+ }
-+
-+ rx_q->cur_rx = 0;
-+ rx_q->dirty_rx = (unsigned int)(i - DMA_RX_SIZE);
-+
-+ stmmac_clear_rx_descriptors(priv, queue);
-+
-+ /* Setup the chained descriptor addresses */
-+ if (priv->mode == STMMAC_CHAIN_MODE) {
-+ if (priv->extend_desc)
-+ priv->hw->mode->init(rx_q->dma_erx,
-+ rx_q->dma_rx_phy,
-+ DMA_RX_SIZE, 1);
-+ else
-+ priv->hw->mode->init(rx_q->dma_rx,
-+ rx_q->dma_rx_phy,
-+ DMA_RX_SIZE, 0);
-+ }
- }
-- priv->cur_rx = 0;
-- priv->dirty_rx = (unsigned int)(i - DMA_RX_SIZE);
-+
- buf_sz = bfsize;
-
-- /* Setup the chained descriptor addresses */
-- if (priv->mode == STMMAC_CHAIN_MODE) {
-- if (priv->extend_desc) {
-- priv->hw->mode->init(priv->dma_erx, priv->dma_rx_phy,
-- DMA_RX_SIZE, 1);
-- priv->hw->mode->init(priv->dma_etx, priv->dma_tx_phy,
-- DMA_TX_SIZE, 1);
-- } else {
-- priv->hw->mode->init(priv->dma_rx, priv->dma_rx_phy,
-- DMA_RX_SIZE, 0);
-- priv->hw->mode->init(priv->dma_tx, priv->dma_tx_phy,
-- DMA_TX_SIZE, 0);
-- }
-+ return 0;
-+
-+err_init_rx_buffers:
-+ while (queue >= 0) {
-+ while (--i >= 0)
-+ stmmac_free_rx_buffer(priv, queue, i);
-+
-+ if (queue == 0)
-+ break;
-+
-+ i = DMA_RX_SIZE;
-+ queue--;
- }
-
-- /* TX INITIALIZATION */
-- for (i = 0; i < DMA_TX_SIZE; i++) {
-- struct dma_desc *p;
-- if (priv->extend_desc)
-- p = &((priv->dma_etx + i)->basic);
-- else
-- p = priv->dma_tx + i;
-+ return ret;
-+}
-
-- if (priv->synopsys_id >= DWMAC_CORE_4_00) {
-- p->des0 = 0;
-- p->des1 = 0;
-- p->des2 = 0;
-- p->des3 = 0;
-- } else {
-- p->des2 = 0;
-+/**
-+ * init_dma_tx_desc_rings - init the TX descriptor rings
-+ * @dev: net device structure.
-+ * Description: this function initializes the DMA TX descriptors
-+ * and allocates the socket buffers. It supports the chained and ring
-+ * modes.
-+ */
-+static int init_dma_tx_desc_rings(struct net_device *dev)
-+{
-+ struct stmmac_priv *priv = netdev_priv(dev);
-+ u32 tx_queue_cnt = priv->plat->tx_queues_to_use;
-+ u32 queue;
-+ int i;
-+
-+ for (queue = 0; queue < tx_queue_cnt; queue++) {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
-+
-+ netif_dbg(priv, probe, priv->dev,
-+ "(%s) dma_tx_phy=0x%08x\n", __func__,
-+ (u32)tx_q->dma_tx_phy);
-+
-+ /* Setup the chained descriptor addresses */
-+ if (priv->mode == STMMAC_CHAIN_MODE) {
-+ if (priv->extend_desc)
-+ priv->hw->mode->init(tx_q->dma_etx,
-+ tx_q->dma_tx_phy,
-+ DMA_TX_SIZE, 1);
-+ else
-+ priv->hw->mode->init(tx_q->dma_tx,
-+ tx_q->dma_tx_phy,
-+ DMA_TX_SIZE, 0);
-+ }
-+
-+ for (i = 0; i < DMA_TX_SIZE; i++) {
-+ struct dma_desc *p;
-+ if (priv->extend_desc)
-+ p = &((tx_q->dma_etx + i)->basic);
-+ else
-+ p = tx_q->dma_tx + i;
-+
-+ if (priv->synopsys_id >= DWMAC_CORE_4_00) {
-+ p->des0 = 0;
-+ p->des1 = 0;
-+ p->des2 = 0;
-+ p->des3 = 0;
-+ } else {
-+ p->des2 = 0;
-+ }
-+
-+ tx_q->tx_skbuff_dma[i].buf = 0;
-+ tx_q->tx_skbuff_dma[i].map_as_page = false;
-+ tx_q->tx_skbuff_dma[i].len = 0;
-+ tx_q->tx_skbuff_dma[i].last_segment = false;
-+ tx_q->tx_skbuff[i] = NULL;
- }
-
-- priv->tx_skbuff_dma[i].buf = 0;
-- priv->tx_skbuff_dma[i].map_as_page = false;
-- priv->tx_skbuff_dma[i].len = 0;
-- priv->tx_skbuff_dma[i].last_segment = false;
-- priv->tx_skbuff[i] = NULL;
-+ tx_q->dirty_tx = 0;
-+ tx_q->cur_tx = 0;
-+
-+ netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, queue));
- }
-
-- priv->dirty_tx = 0;
-- priv->cur_tx = 0;
-- netdev_reset_queue(priv->dev);
-+ return 0;
-+}
-+
-+/**
-+ * init_dma_desc_rings - init the RX/TX descriptor rings
-+ * @dev: net device structure
-+ * @flags: gfp flag.
-+ * Description: this function initializes the DMA RX/TX descriptors
-+ * and allocates the socket buffers. It supports the chained and ring
-+ * modes.
-+ */
-+static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
-+{
-+ struct stmmac_priv *priv = netdev_priv(dev);
-+ int ret;
-+
-+ ret = init_dma_rx_desc_rings(dev, flags);
-+ if (ret)
-+ return ret;
-+
-+ ret = init_dma_tx_desc_rings(dev);
-
- stmmac_clear_descriptors(priv);
-
- if (netif_msg_hw(priv))
- stmmac_display_rings(priv);
-
-- return 0;
--err_init_rx_buffers:
-- while (--i >= 0)
-- stmmac_free_rx_buffers(priv, i);
- return ret;
- }
-
--static void dma_free_rx_skbufs(struct stmmac_priv *priv)
-+/**
-+ * dma_free_rx_skbufs - free RX dma buffers
-+ * @priv: private structure
-+ * @queue: RX queue index
-+ */
-+static void dma_free_rx_skbufs(struct stmmac_priv *priv, u32 queue)
- {
- int i;
-
- for (i = 0; i < DMA_RX_SIZE; i++)
-- stmmac_free_rx_buffers(priv, i);
-+ stmmac_free_rx_buffer(priv, queue, i);
- }
-
--static void dma_free_tx_skbufs(struct stmmac_priv *priv)
-+/**
-+ * dma_free_tx_skbufs - free TX dma buffers
-+ * @priv: private structure
-+ * @queue: TX queue index
-+ */
-+static void dma_free_tx_skbufs(struct stmmac_priv *priv, u32 queue)
- {
- int i;
-
-- for (i = 0; i < DMA_TX_SIZE; i++) {
-- if (priv->tx_skbuff_dma[i].buf) {
-- if (priv->tx_skbuff_dma[i].map_as_page)
-- dma_unmap_page(priv->device,
-- priv->tx_skbuff_dma[i].buf,
-- priv->tx_skbuff_dma[i].len,
-- DMA_TO_DEVICE);
-- else
-- dma_unmap_single(priv->device,
-- priv->tx_skbuff_dma[i].buf,
-- priv->tx_skbuff_dma[i].len,
-- DMA_TO_DEVICE);
-- }
-+ for (i = 0; i < DMA_TX_SIZE; i++)
-+ stmmac_free_tx_buffer(priv, queue, i);
-+}
-
-- if (priv->tx_skbuff[i]) {
-- dev_kfree_skb_any(priv->tx_skbuff[i]);
-- priv->tx_skbuff[i] = NULL;
-- priv->tx_skbuff_dma[i].buf = 0;
-- priv->tx_skbuff_dma[i].map_as_page = false;
-- }
-+/**
-+ * free_dma_rx_desc_resources - free RX dma desc resources
-+ * @priv: private structure
-+ */
-+static void free_dma_rx_desc_resources(struct stmmac_priv *priv)
-+{
-+ u32 rx_count = priv->plat->rx_queues_to_use;
-+ u32 queue;
-+
-+ /* Free RX queue resources */
-+ for (queue = 0; queue < rx_count; queue++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+
-+ /* Release the DMA RX socket buffers */
-+ dma_free_rx_skbufs(priv, queue);
-+
-+ /* Free DMA regions of consistent memory previously allocated */
-+ if (!priv->extend_desc)
-+ dma_free_coherent(priv->device,
-+ DMA_RX_SIZE * sizeof(struct dma_desc),
-+ rx_q->dma_rx, rx_q->dma_rx_phy);
-+ else
-+ dma_free_coherent(priv->device, DMA_RX_SIZE *
-+ sizeof(struct dma_extended_desc),
-+ rx_q->dma_erx, rx_q->dma_rx_phy);
-+
-+ kfree(rx_q->rx_skbuff_dma);
-+ kfree(rx_q->rx_skbuff);
- }
- }
-
- /**
-- * alloc_dma_desc_resources - alloc TX/RX resources.
-+ * free_dma_tx_desc_resources - free TX dma desc resources
-+ * @priv: private structure
-+ */
-+static void free_dma_tx_desc_resources(struct stmmac_priv *priv)
-+{
-+ u32 tx_count = priv->plat->tx_queues_to_use;
-+ u32 queue = 0;
-+
-+ /* Free TX queue resources */
-+ for (queue = 0; queue < tx_count; queue++) {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
-+
-+ /* Release the DMA TX socket buffers */
-+ dma_free_tx_skbufs(priv, queue);
-+
-+ /* Free DMA regions of consistent memory previously allocated */
-+ if (!priv->extend_desc)
-+ dma_free_coherent(priv->device,
-+ DMA_TX_SIZE * sizeof(struct dma_desc),
-+ tx_q->dma_tx, tx_q->dma_tx_phy);
-+ else
-+ dma_free_coherent(priv->device, DMA_TX_SIZE *
-+ sizeof(struct dma_extended_desc),
-+ tx_q->dma_etx, tx_q->dma_tx_phy);
-+
-+ kfree(tx_q->tx_skbuff_dma);
-+ kfree(tx_q->tx_skbuff);
-+ }
-+}
-+
-+/**
-+ * alloc_dma_rx_desc_resources - alloc RX resources.
- * @priv: private structure
- * Description: according to which descriptor can be used (extend or basic)
- * this function allocates the resources for TX and RX paths. In case of
- * reception, for example, it pre-allocated the RX socket buffer in order to
- * allow zero-copy mechanism.
- */
--static int alloc_dma_desc_resources(struct stmmac_priv *priv)
-+static int alloc_dma_rx_desc_resources(struct stmmac_priv *priv)
- {
-+ u32 rx_count = priv->plat->rx_queues_to_use;
- int ret = -ENOMEM;
-+ u32 queue;
-
-- priv->rx_skbuff_dma = kmalloc_array(DMA_RX_SIZE, sizeof(dma_addr_t),
-- GFP_KERNEL);
-- if (!priv->rx_skbuff_dma)
-- return -ENOMEM;
-+ /* RX queues buffers and DMA */
-+ for (queue = 0; queue < rx_count; queue++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-
-- priv->rx_skbuff = kmalloc_array(DMA_RX_SIZE, sizeof(struct sk_buff *),
-- GFP_KERNEL);
-- if (!priv->rx_skbuff)
-- goto err_rx_skbuff;
--
-- priv->tx_skbuff_dma = kmalloc_array(DMA_TX_SIZE,
-- sizeof(*priv->tx_skbuff_dma),
-- GFP_KERNEL);
-- if (!priv->tx_skbuff_dma)
-- goto err_tx_skbuff_dma;
--
-- priv->tx_skbuff = kmalloc_array(DMA_TX_SIZE, sizeof(struct sk_buff *),
-- GFP_KERNEL);
-- if (!priv->tx_skbuff)
-- goto err_tx_skbuff;
--
-- if (priv->extend_desc) {
-- priv->dma_erx = dma_zalloc_coherent(priv->device, DMA_RX_SIZE *
-- sizeof(struct
-- dma_extended_desc),
-- &priv->dma_rx_phy,
-- GFP_KERNEL);
-- if (!priv->dma_erx)
-- goto err_dma;
-+ rx_q->queue_index = queue;
-+ rx_q->priv_data = priv;
-
-- priv->dma_etx = dma_zalloc_coherent(priv->device, DMA_TX_SIZE *
-- sizeof(struct
-- dma_extended_desc),
-- &priv->dma_tx_phy,
-+ rx_q->rx_skbuff_dma = kmalloc_array(DMA_RX_SIZE,
-+ sizeof(dma_addr_t),
- GFP_KERNEL);
-- if (!priv->dma_etx) {
-- dma_free_coherent(priv->device, DMA_RX_SIZE *
-- sizeof(struct dma_extended_desc),
-- priv->dma_erx, priv->dma_rx_phy);
-- goto err_dma;
-- }
-- } else {
-- priv->dma_rx = dma_zalloc_coherent(priv->device, DMA_RX_SIZE *
-- sizeof(struct dma_desc),
-- &priv->dma_rx_phy,
-- GFP_KERNEL);
-- if (!priv->dma_rx)
-- goto err_dma;
-+ if (!rx_q->rx_skbuff_dma)
-+ return -ENOMEM;
-
-- priv->dma_tx = dma_zalloc_coherent(priv->device, DMA_TX_SIZE *
-- sizeof(struct dma_desc),
-- &priv->dma_tx_phy,
-- GFP_KERNEL);
-- if (!priv->dma_tx) {
-- dma_free_coherent(priv->device, DMA_RX_SIZE *
-- sizeof(struct dma_desc),
-- priv->dma_rx, priv->dma_rx_phy);
-+ rx_q->rx_skbuff = kmalloc_array(DMA_RX_SIZE,
-+ sizeof(struct sk_buff *),
-+ GFP_KERNEL);
-+ if (!rx_q->rx_skbuff)
- goto err_dma;
-+
-+ if (priv->extend_desc) {
-+ rx_q->dma_erx = dma_zalloc_coherent(priv->device,
-+ DMA_RX_SIZE *
-+ sizeof(struct
-+ dma_extended_desc),
-+ &rx_q->dma_rx_phy,
-+ GFP_KERNEL);
-+ if (!rx_q->dma_erx)
-+ goto err_dma;
-+
-+ } else {
-+ rx_q->dma_rx = dma_zalloc_coherent(priv->device,
-+ DMA_RX_SIZE *
-+ sizeof(struct
-+ dma_desc),
-+ &rx_q->dma_rx_phy,
-+ GFP_KERNEL);
-+ if (!rx_q->dma_rx)
-+ goto err_dma;
- }
- }
-
- return 0;
-
- err_dma:
-- kfree(priv->tx_skbuff);
--err_tx_skbuff:
-- kfree(priv->tx_skbuff_dma);
--err_tx_skbuff_dma:
-- kfree(priv->rx_skbuff);
--err_rx_skbuff:
-- kfree(priv->rx_skbuff_dma);
-+ free_dma_rx_desc_resources(priv);
-+
-+ return ret;
-+}
-+
-+/**
-+ * alloc_dma_tx_desc_resources - alloc TX resources.
-+ * @priv: private structure
-+ * Description: according to which descriptor can be used (extend or basic)
-+ * this function allocates the resources for TX and RX paths. In case of
-+ * reception, for example, it pre-allocated the RX socket buffer in order to
-+ * allow zero-copy mechanism.
-+ */
-+static int alloc_dma_tx_desc_resources(struct stmmac_priv *priv)
-+{
-+ u32 tx_count = priv->plat->tx_queues_to_use;
-+ int ret = -ENOMEM;
-+ u32 queue;
-+
-+ /* TX queues buffers and DMA */
-+ for (queue = 0; queue < tx_count; queue++) {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
-+
-+ tx_q->queue_index = queue;
-+ tx_q->priv_data = priv;
-+
-+ tx_q->tx_skbuff_dma = kmalloc_array(DMA_TX_SIZE,
-+ sizeof(*tx_q->tx_skbuff_dma),
-+ GFP_KERNEL);
-+ if (!tx_q->tx_skbuff_dma)
-+ return -ENOMEM;
-+
-+ tx_q->tx_skbuff = kmalloc_array(DMA_TX_SIZE,
-+ sizeof(struct sk_buff *),
-+ GFP_KERNEL);
-+ if (!tx_q->tx_skbuff)
-+ goto err_dma_buffers;
-+
-+ if (priv->extend_desc) {
-+ tx_q->dma_etx = dma_zalloc_coherent(priv->device,
-+ DMA_TX_SIZE *
-+ sizeof(struct
-+ dma_extended_desc),
-+ &tx_q->dma_tx_phy,
-+ GFP_KERNEL);
-+ if (!tx_q->dma_etx)
-+ goto err_dma_buffers;
-+ } else {
-+ tx_q->dma_tx = dma_zalloc_coherent(priv->device,
-+ DMA_TX_SIZE *
-+ sizeof(struct
-+ dma_desc),
-+ &tx_q->dma_tx_phy,
-+ GFP_KERNEL);
-+ if (!tx_q->dma_tx)
-+ goto err_dma_buffers;
-+ }
-+ }
-+
-+ return 0;
-+
-+err_dma_buffers:
-+ free_dma_tx_desc_resources(priv);
-+
-+ return ret;
-+}
-+
-+/**
-+ * alloc_dma_desc_resources - alloc TX/RX resources.
-+ * @priv: private structure
-+ * Description: according to which descriptor can be used (extend or basic)
-+ * this function allocates the resources for TX and RX paths. In case of
-+ * reception, for example, it pre-allocated the RX socket buffer in order to
-+ * allow zero-copy mechanism.
-+ */
-+static int alloc_dma_desc_resources(struct stmmac_priv *priv)
-+{
-+ /* RX Allocation */
-+ int ret = alloc_dma_rx_desc_resources(priv);
-+
-+ if (ret)
-+ return ret;
-+
-+ ret = alloc_dma_tx_desc_resources(priv);
-+
- return ret;
- }
-
-+/**
-+ * free_dma_desc_resources - free dma desc resources
-+ * @priv: private structure
-+ */
- static void free_dma_desc_resources(struct stmmac_priv *priv)
- {
-- /* Release the DMA TX/RX socket buffers */
-- dma_free_rx_skbufs(priv);
-- dma_free_tx_skbufs(priv);
--
-- /* Free DMA regions of consistent memory previously allocated */
-- if (!priv->extend_desc) {
-- dma_free_coherent(priv->device,
-- DMA_TX_SIZE * sizeof(struct dma_desc),
-- priv->dma_tx, priv->dma_tx_phy);
-- dma_free_coherent(priv->device,
-- DMA_RX_SIZE * sizeof(struct dma_desc),
-- priv->dma_rx, priv->dma_rx_phy);
-- } else {
-- dma_free_coherent(priv->device, DMA_TX_SIZE *
-- sizeof(struct dma_extended_desc),
-- priv->dma_etx, priv->dma_tx_phy);
-- dma_free_coherent(priv->device, DMA_RX_SIZE *
-- sizeof(struct dma_extended_desc),
-- priv->dma_erx, priv->dma_rx_phy);
-- }
-- kfree(priv->rx_skbuff_dma);
-- kfree(priv->rx_skbuff);
-- kfree(priv->tx_skbuff_dma);
-- kfree(priv->tx_skbuff);
-+ /* Release the DMA RX socket buffers */
-+ free_dma_rx_desc_resources(priv);
-+
-+ /* Release the DMA TX socket buffers */
-+ free_dma_tx_desc_resources(priv);
- }
-
- /**
-@@ -1271,19 +1646,104 @@ static void free_dma_desc_resources(stru
- */
- static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv)
- {
-- int rx_count = priv->dma_cap.number_rx_queues;
-- int queue = 0;
-+ u32 rx_queues_count = priv->plat->rx_queues_to_use;
-+ int queue;
-+ u8 mode;
-
-- /* If GMAC does not have multiple queues, then this is not necessary*/
-- if (rx_count == 1)
-- return;
-+ for (queue = 0; queue < rx_queues_count; queue++) {
-+ mode = priv->plat->rx_queues_cfg[queue].mode_to_use;
-+ priv->hw->mac->rx_queue_enable(priv->hw, mode, queue);
-+ }
-+}
-
-- /**
-- * If the core is synthesized with multiple rx queues / multiple
-- * dma channels, then rx queues will be disabled by default.
-- * For now only rx queue 0 is enabled.
-- */
-- priv->hw->mac->rx_queue_enable(priv->hw, queue);
-+/**
-+ * stmmac_start_rx_dma - start RX DMA channel
-+ * @priv: driver private structure
-+ * @chan: RX channel index
-+ * Description:
-+ * This starts a RX DMA channel
-+ */
-+static void stmmac_start_rx_dma(struct stmmac_priv *priv, u32 chan)
-+{
-+ netdev_dbg(priv->dev, "DMA RX processes started in channel %d\n", chan);
-+ priv->hw->dma->start_rx(priv->ioaddr, chan);
-+}
-+
-+/**
-+ * stmmac_start_tx_dma - start TX DMA channel
-+ * @priv: driver private structure
-+ * @chan: TX channel index
-+ * Description:
-+ * This starts a TX DMA channel
-+ */
-+static void stmmac_start_tx_dma(struct stmmac_priv *priv, u32 chan)
-+{
-+ netdev_dbg(priv->dev, "DMA TX processes started in channel %d\n", chan);
-+ priv->hw->dma->start_tx(priv->ioaddr, chan);
-+}
-+
-+/**
-+ * stmmac_stop_rx_dma - stop RX DMA channel
-+ * @priv: driver private structure
-+ * @chan: RX channel index
-+ * Description:
-+ * This stops a RX DMA channel
-+ */
-+static void stmmac_stop_rx_dma(struct stmmac_priv *priv, u32 chan)
-+{
-+ netdev_dbg(priv->dev, "DMA RX processes stopped in channel %d\n", chan);
-+ priv->hw->dma->stop_rx(priv->ioaddr, chan);
-+}
-+
-+/**
-+ * stmmac_stop_tx_dma - stop TX DMA channel
-+ * @priv: driver private structure
-+ * @chan: TX channel index
-+ * Description:
-+ * This stops a TX DMA channel
-+ */
-+static void stmmac_stop_tx_dma(struct stmmac_priv *priv, u32 chan)
-+{
-+ netdev_dbg(priv->dev, "DMA TX processes stopped in channel %d\n", chan);
-+ priv->hw->dma->stop_tx(priv->ioaddr, chan);
-+}
-+
-+/**
-+ * stmmac_start_all_dma - start all RX and TX DMA channels
-+ * @priv: driver private structure
-+ * Description:
-+ * This starts all the RX and TX DMA channels
-+ */
-+static void stmmac_start_all_dma(struct stmmac_priv *priv)
-+{
-+ u32 rx_channels_count = priv->plat->rx_queues_to_use;
-+ u32 tx_channels_count = priv->plat->tx_queues_to_use;
-+ u32 chan = 0;
-+
-+ for (chan = 0; chan < rx_channels_count; chan++)
-+ stmmac_start_rx_dma(priv, chan);
-+
-+ for (chan = 0; chan < tx_channels_count; chan++)
-+ stmmac_start_tx_dma(priv, chan);
-+}
-+
-+/**
-+ * stmmac_stop_all_dma - stop all RX and TX DMA channels
-+ * @priv: driver private structure
-+ * Description:
-+ * This stops the RX and TX DMA channels
-+ */
-+static void stmmac_stop_all_dma(struct stmmac_priv *priv)
-+{
-+ u32 rx_channels_count = priv->plat->rx_queues_to_use;
-+ u32 tx_channels_count = priv->plat->tx_queues_to_use;
-+ u32 chan = 0;
-+
-+ for (chan = 0; chan < rx_channels_count; chan++)
-+ stmmac_stop_rx_dma(priv, chan);
-+
-+ for (chan = 0; chan < tx_channels_count; chan++)
-+ stmmac_stop_tx_dma(priv, chan);
- }
-
- /**
-@@ -1294,11 +1754,20 @@ static void stmmac_mac_enable_rx_queues(
- */
- static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
- {
-+ u32 rx_channels_count = priv->plat->rx_queues_to_use;
-+ u32 tx_channels_count = priv->plat->tx_queues_to_use;
- int rxfifosz = priv->plat->rx_fifo_size;
--
-- if (priv->plat->force_thresh_dma_mode)
-- priv->hw->dma->dma_mode(priv->ioaddr, tc, tc, rxfifosz);
-- else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
-+ u32 txmode = 0;
-+ u32 rxmode = 0;
-+ u32 chan = 0;
-+
-+ if (rxfifosz == 0)
-+ rxfifosz = priv->dma_cap.rx_fifo_size;
-+
-+ if (priv->plat->force_thresh_dma_mode) {
-+ txmode = tc;
-+ rxmode = tc;
-+ } else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
- /*
- * In case of GMAC, SF mode can be enabled
- * to perform the TX COE in HW. This depends on:
-@@ -1306,37 +1775,53 @@ static void stmmac_dma_operation_mode(st
- * 2) There is no bugged Jumbo frame support
- * that needs to not insert csum in the TDES.
- */
-- priv->hw->dma->dma_mode(priv->ioaddr, SF_DMA_MODE, SF_DMA_MODE,
-- rxfifosz);
-+ txmode = SF_DMA_MODE;
-+ rxmode = SF_DMA_MODE;
- priv->xstats.threshold = SF_DMA_MODE;
-- } else
-- priv->hw->dma->dma_mode(priv->ioaddr, tc, SF_DMA_MODE,
-+ } else {
-+ txmode = tc;
-+ rxmode = SF_DMA_MODE;
-+ }
-+
-+ /* configure all channels */
-+ if (priv->synopsys_id >= DWMAC_CORE_4_00) {
-+ for (chan = 0; chan < rx_channels_count; chan++)
-+ priv->hw->dma->dma_rx_mode(priv->ioaddr, rxmode, chan,
-+ rxfifosz);
-+
-+ for (chan = 0; chan < tx_channels_count; chan++)
-+ priv->hw->dma->dma_tx_mode(priv->ioaddr, txmode, chan);
-+ } else {
-+ priv->hw->dma->dma_mode(priv->ioaddr, txmode, rxmode,
- rxfifosz);
-+ }
- }
-
- /**
- * stmmac_tx_clean - to manage the transmission completion
- * @priv: driver private structure
-+ * @queue: TX queue index
- * Description: it reclaims the transmit resources after transmission completes.
- */
--static void stmmac_tx_clean(struct stmmac_priv *priv)
-+static void stmmac_tx_clean(struct stmmac_priv *priv, u32 queue)
- {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
- unsigned int bytes_compl = 0, pkts_compl = 0;
-- unsigned int entry = priv->dirty_tx;
-+ unsigned int entry = tx_q->dirty_tx;
-
- netif_tx_lock(priv->dev);
-
- priv->xstats.tx_clean++;
-
-- while (entry != priv->cur_tx) {
-- struct sk_buff *skb = priv->tx_skbuff[entry];
-+ while (entry != tx_q->cur_tx) {
-+ struct sk_buff *skb = tx_q->tx_skbuff[entry];
- struct dma_desc *p;
- int status;
-
- if (priv->extend_desc)
-- p = (struct dma_desc *)(priv->dma_etx + entry);
-+ p = (struct dma_desc *)(tx_q->dma_etx + entry);
- else
-- p = priv->dma_tx + entry;
-+ p = tx_q->dma_tx + entry;
-
- status = priv->hw->desc->tx_status(&priv->dev->stats,
- &priv->xstats, p,
-@@ -1362,48 +1847,51 @@ static void stmmac_tx_clean(struct stmma
- stmmac_get_tx_hwtstamp(priv, p, skb);
- }
-
-- if (likely(priv->tx_skbuff_dma[entry].buf)) {
-- if (priv->tx_skbuff_dma[entry].map_as_page)
-+ if (likely(tx_q->tx_skbuff_dma[entry].buf)) {
-+ if (tx_q->tx_skbuff_dma[entry].map_as_page)
- dma_unmap_page(priv->device,
-- priv->tx_skbuff_dma[entry].buf,
-- priv->tx_skbuff_dma[entry].len,
-+ tx_q->tx_skbuff_dma[entry].buf,
-+ tx_q->tx_skbuff_dma[entry].len,
- DMA_TO_DEVICE);
- else
- dma_unmap_single(priv->device,
-- priv->tx_skbuff_dma[entry].buf,
-- priv->tx_skbuff_dma[entry].len,
-+ tx_q->tx_skbuff_dma[entry].buf,
-+ tx_q->tx_skbuff_dma[entry].len,
- DMA_TO_DEVICE);
-- priv->tx_skbuff_dma[entry].buf = 0;
-- priv->tx_skbuff_dma[entry].len = 0;
-- priv->tx_skbuff_dma[entry].map_as_page = false;
-+ tx_q->tx_skbuff_dma[entry].buf = 0;
-+ tx_q->tx_skbuff_dma[entry].len = 0;
-+ tx_q->tx_skbuff_dma[entry].map_as_page = false;
- }
-
- if (priv->hw->mode->clean_desc3)
-- priv->hw->mode->clean_desc3(priv, p);
-+ priv->hw->mode->clean_desc3(tx_q, p);
-
-- priv->tx_skbuff_dma[entry].last_segment = false;
-- priv->tx_skbuff_dma[entry].is_jumbo = false;
-+ tx_q->tx_skbuff_dma[entry].last_segment = false;
-+ tx_q->tx_skbuff_dma[entry].is_jumbo = false;
-
- if (likely(skb != NULL)) {
- pkts_compl++;
- bytes_compl += skb->len;
- dev_consume_skb_any(skb);
-- priv->tx_skbuff[entry] = NULL;
-+ tx_q->tx_skbuff[entry] = NULL;
- }
-
- priv->hw->desc->release_tx_desc(p, priv->mode);
-
- entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
- }
-- priv->dirty_tx = entry;
-+ tx_q->dirty_tx = entry;
-+
-+ netdev_tx_completed_queue(netdev_get_tx_queue(priv->dev, queue),
-+ pkts_compl, bytes_compl);
-
-- netdev_completed_queue(priv->dev, pkts_compl, bytes_compl);
-+ if (unlikely(netif_tx_queue_stopped(netdev_get_tx_queue(priv->dev,
-+ queue))) &&
-+ stmmac_tx_avail(priv, queue) > STMMAC_TX_THRESH) {
-
-- if (unlikely(netif_queue_stopped(priv->dev) &&
-- stmmac_tx_avail(priv) > STMMAC_TX_THRESH)) {
- netif_dbg(priv, tx_done, priv->dev,
- "%s: restart transmit\n", __func__);
-- netif_wake_queue(priv->dev);
-+ netif_tx_wake_queue(netdev_get_tx_queue(priv->dev, queue));
- }
-
- if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) {
-@@ -1413,45 +1901,76 @@ static void stmmac_tx_clean(struct stmma
- netif_tx_unlock(priv->dev);
- }
-
--static inline void stmmac_enable_dma_irq(struct stmmac_priv *priv)
-+static inline void stmmac_enable_dma_irq(struct stmmac_priv *priv, u32 chan)
- {
-- priv->hw->dma->enable_dma_irq(priv->ioaddr);
-+ priv->hw->dma->enable_dma_irq(priv->ioaddr, chan);
- }
-
--static inline void stmmac_disable_dma_irq(struct stmmac_priv *priv)
-+static inline void stmmac_disable_dma_irq(struct stmmac_priv *priv, u32 chan)
- {
-- priv->hw->dma->disable_dma_irq(priv->ioaddr);
-+ priv->hw->dma->disable_dma_irq(priv->ioaddr, chan);
- }
-
- /**
- * stmmac_tx_err - to manage the tx error
- * @priv: driver private structure
-+ * @chan: channel index
- * Description: it cleans the descriptors and restarts the transmission
- * in case of transmission errors.
- */
--static void stmmac_tx_err(struct stmmac_priv *priv)
-+static void stmmac_tx_err(struct stmmac_priv *priv, u32 chan)
- {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
- int i;
-- netif_stop_queue(priv->dev);
-
-- priv->hw->dma->stop_tx(priv->ioaddr);
-- dma_free_tx_skbufs(priv);
-+ netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, chan));
-+
-+ stmmac_stop_tx_dma(priv, chan);
-+ dma_free_tx_skbufs(priv, chan);
- for (i = 0; i < DMA_TX_SIZE; i++)
- if (priv->extend_desc)
-- priv->hw->desc->init_tx_desc(&priv->dma_etx[i].basic,
-+ priv->hw->desc->init_tx_desc(&tx_q->dma_etx[i].basic,
- priv->mode,
- (i == DMA_TX_SIZE - 1));
- else
-- priv->hw->desc->init_tx_desc(&priv->dma_tx[i],
-+ priv->hw->desc->init_tx_desc(&tx_q->dma_tx[i],
- priv->mode,
- (i == DMA_TX_SIZE - 1));
-- priv->dirty_tx = 0;
-- priv->cur_tx = 0;
-- netdev_reset_queue(priv->dev);
-- priv->hw->dma->start_tx(priv->ioaddr);
-+ tx_q->dirty_tx = 0;
-+ tx_q->cur_tx = 0;
-+ netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, chan));
-+ stmmac_start_tx_dma(priv, chan);
-
- priv->dev->stats.tx_errors++;
-- netif_wake_queue(priv->dev);
-+ netif_tx_wake_queue(netdev_get_tx_queue(priv->dev, chan));
-+}
-+
-+/**
-+ * stmmac_set_dma_operation_mode - Set DMA operation mode by channel
-+ * @priv: driver private structure
-+ * @txmode: TX operating mode
-+ * @rxmode: RX operating mode
-+ * @chan: channel index
-+ * Description: it is used for configuring of the DMA operation mode in
-+ * runtime in order to program the tx/rx DMA thresholds or Store-And-Forward
-+ * mode.
-+ */
-+static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
-+ u32 rxmode, u32 chan)
-+{
-+ int rxfifosz = priv->plat->rx_fifo_size;
-+
-+ if (rxfifosz == 0)
-+ rxfifosz = priv->dma_cap.rx_fifo_size;
-+
-+ if (priv->synopsys_id >= DWMAC_CORE_4_00) {
-+ priv->hw->dma->dma_rx_mode(priv->ioaddr, rxmode, chan,
-+ rxfifosz);
-+ priv->hw->dma->dma_tx_mode(priv->ioaddr, txmode, chan);
-+ } else {
-+ priv->hw->dma->dma_mode(priv->ioaddr, txmode, rxmode,
-+ rxfifosz);
-+ }
- }
-
- /**
-@@ -1463,31 +1982,43 @@ static void stmmac_tx_err(struct stmmac_
- */
- static void stmmac_dma_interrupt(struct stmmac_priv *priv)
- {
-+ u32 tx_channel_count = priv->plat->tx_queues_to_use;
- int status;
-- int rxfifosz = priv->plat->rx_fifo_size;
-+ u32 chan;
-+
-+ for (chan = 0; chan < tx_channel_count; chan++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[chan];
-
-- status = priv->hw->dma->dma_interrupt(priv->ioaddr, &priv->xstats);
-- if (likely((status & handle_rx)) || (status & handle_tx)) {
-- if (likely(napi_schedule_prep(&priv->napi))) {
-- stmmac_disable_dma_irq(priv);
-- __napi_schedule(&priv->napi);
-+ status = priv->hw->dma->dma_interrupt(priv->ioaddr,
-+ &priv->xstats, chan);
-+ if (likely((status & handle_rx)) || (status & handle_tx)) {
-+ if (likely(napi_schedule_prep(&rx_q->napi))) {
-+ stmmac_disable_dma_irq(priv, chan);
-+ __napi_schedule(&rx_q->napi);
-+ }
- }
-- }
-- if (unlikely(status & tx_hard_error_bump_tc)) {
-- /* Try to bump up the dma threshold on this failure */
-- if (unlikely(priv->xstats.threshold != SF_DMA_MODE) &&
-- (tc <= 256)) {
-- tc += 64;
-- if (priv->plat->force_thresh_dma_mode)
-- priv->hw->dma->dma_mode(priv->ioaddr, tc, tc,
-- rxfifosz);
-- else
-- priv->hw->dma->dma_mode(priv->ioaddr, tc,
-- SF_DMA_MODE, rxfifosz);
-- priv->xstats.threshold = tc;
-+
-+ if (unlikely(status & tx_hard_error_bump_tc)) {
-+ /* Try to bump up the dma threshold on this failure */
-+ if (unlikely(priv->xstats.threshold != SF_DMA_MODE) &&
-+ (tc <= 256)) {
-+ tc += 64;
-+ if (priv->plat->force_thresh_dma_mode)
-+ stmmac_set_dma_operation_mode(priv,
-+ tc,
-+ tc,
-+ chan);
-+ else
-+ stmmac_set_dma_operation_mode(priv,
-+ tc,
-+ SF_DMA_MODE,
-+ chan);
-+ priv->xstats.threshold = tc;
-+ }
-+ } else if (unlikely(status == tx_hard_error)) {
-+ stmmac_tx_err(priv, chan);
- }
-- } else if (unlikely(status == tx_hard_error))
-- stmmac_tx_err(priv);
-+ }
- }
-
- /**
-@@ -1594,6 +2125,13 @@ static void stmmac_check_ether_addr(stru
- */
- static int stmmac_init_dma_engine(struct stmmac_priv *priv)
- {
-+ u32 rx_channels_count = priv->plat->rx_queues_to_use;
-+ u32 tx_channels_count = priv->plat->tx_queues_to_use;
-+ struct stmmac_rx_queue *rx_q;
-+ struct stmmac_tx_queue *tx_q;
-+ u32 dummy_dma_rx_phy = 0;
-+ u32 dummy_dma_tx_phy = 0;
-+ u32 chan = 0;
- int atds = 0;
- int ret = 0;
-
-@@ -1611,19 +2149,49 @@ static int stmmac_init_dma_engine(struct
- return ret;
- }
-
-- priv->hw->dma->init(priv->ioaddr, priv->plat->dma_cfg,
-- priv->dma_tx_phy, priv->dma_rx_phy, atds);
--
- if (priv->synopsys_id >= DWMAC_CORE_4_00) {
-- priv->rx_tail_addr = priv->dma_rx_phy +
-- (DMA_RX_SIZE * sizeof(struct dma_desc));
-- priv->hw->dma->set_rx_tail_ptr(priv->ioaddr, priv->rx_tail_addr,
-- STMMAC_CHAN0);
--
-- priv->tx_tail_addr = priv->dma_tx_phy +
-- (DMA_TX_SIZE * sizeof(struct dma_desc));
-- priv->hw->dma->set_tx_tail_ptr(priv->ioaddr, priv->tx_tail_addr,
-- STMMAC_CHAN0);
-+ /* DMA Configuration */
-+ priv->hw->dma->init(priv->ioaddr, priv->plat->dma_cfg,
-+ dummy_dma_tx_phy, dummy_dma_rx_phy, atds);
-+
-+ /* DMA RX Channel Configuration */
-+ for (chan = 0; chan < rx_channels_count; chan++) {
-+ rx_q = &priv->rx_queue[chan];
-+
-+ priv->hw->dma->init_rx_chan(priv->ioaddr,
-+ priv->plat->dma_cfg,
-+ rx_q->dma_rx_phy, chan);
-+
-+ rx_q->rx_tail_addr = rx_q->dma_rx_phy +
-+ (DMA_RX_SIZE * sizeof(struct dma_desc));
-+ priv->hw->dma->set_rx_tail_ptr(priv->ioaddr,
-+ rx_q->rx_tail_addr,
-+ chan);
-+ }
-+
-+ /* DMA TX Channel Configuration */
-+ for (chan = 0; chan < tx_channels_count; chan++) {
-+ tx_q = &priv->tx_queue[chan];
-+
-+ priv->hw->dma->init_chan(priv->ioaddr,
-+ priv->plat->dma_cfg,
-+ chan);
-+
-+ priv->hw->dma->init_tx_chan(priv->ioaddr,
-+ priv->plat->dma_cfg,
-+ tx_q->dma_tx_phy, chan);
-+
-+ tx_q->tx_tail_addr = tx_q->dma_tx_phy +
-+ (DMA_TX_SIZE * sizeof(struct dma_desc));
-+ priv->hw->dma->set_tx_tail_ptr(priv->ioaddr,
-+ tx_q->tx_tail_addr,
-+ chan);
-+ }
-+ } else {
-+ rx_q = &priv->rx_queue[chan];
-+ tx_q = &priv->tx_queue[chan];
-+ priv->hw->dma->init(priv->ioaddr, priv->plat->dma_cfg,
-+ tx_q->dma_tx_phy, rx_q->dma_rx_phy, atds);
- }
-
- if (priv->plat->axi && priv->hw->dma->axi)
-@@ -1641,8 +2209,12 @@ static int stmmac_init_dma_engine(struct
- static void stmmac_tx_timer(unsigned long data)
- {
- struct stmmac_priv *priv = (struct stmmac_priv *)data;
-+ u32 tx_queues_count = priv->plat->tx_queues_to_use;
-+ u32 queue;
-
-- stmmac_tx_clean(priv);
-+ /* let's scan all the tx queues */
-+ for (queue = 0; queue < tx_queues_count; queue++)
-+ stmmac_tx_clean(priv, queue);
- }
-
- /**
-@@ -1664,6 +2236,196 @@ static void stmmac_init_tx_coalesce(stru
- add_timer(&priv->txtimer);
- }
-
-+static void stmmac_set_rings_length(struct stmmac_priv *priv)
-+{
-+ u32 rx_channels_count = priv->plat->rx_queues_to_use;
-+ u32 tx_channels_count = priv->plat->tx_queues_to_use;
-+ u32 chan;
-+
-+ /* set TX ring length */
-+ if (priv->hw->dma->set_tx_ring_len) {
-+ for (chan = 0; chan < tx_channels_count; chan++)
-+ priv->hw->dma->set_tx_ring_len(priv->ioaddr,
-+ (DMA_TX_SIZE - 1), chan);
-+ }
-+
-+ /* set RX ring length */
-+ if (priv->hw->dma->set_rx_ring_len) {
-+ for (chan = 0; chan < rx_channels_count; chan++)
-+ priv->hw->dma->set_rx_ring_len(priv->ioaddr,
-+ (DMA_RX_SIZE - 1), chan);
-+ }
-+}
-+
-+/**
-+ * stmmac_set_tx_queue_weight - Set TX queue weight
-+ * @priv: driver private structure
-+ * Description: It is used for setting TX queues weight
-+ */
-+static void stmmac_set_tx_queue_weight(struct stmmac_priv *priv)
-+{
-+ u32 tx_queues_count = priv->plat->tx_queues_to_use;
-+ u32 weight;
-+ u32 queue;
-+
-+ for (queue = 0; queue < tx_queues_count; queue++) {
-+ weight = priv->plat->tx_queues_cfg[queue].weight;
-+ priv->hw->mac->set_mtl_tx_queue_weight(priv->hw, weight, queue);
-+ }
-+}
-+
-+/**
-+ * stmmac_configure_cbs - Configure CBS in TX queue
-+ * @priv: driver private structure
-+ * Description: It is used for configuring CBS in AVB TX queues
-+ */
-+static void stmmac_configure_cbs(struct stmmac_priv *priv)
-+{
-+ u32 tx_queues_count = priv->plat->tx_queues_to_use;
-+ u32 mode_to_use;
-+ u32 queue;
-+
-+ /* queue 0 is reserved for legacy traffic */
-+ for (queue = 1; queue < tx_queues_count; queue++) {
-+ mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use;
-+ if (mode_to_use == MTL_QUEUE_DCB)
-+ continue;
-+
-+ priv->hw->mac->config_cbs(priv->hw,
-+ priv->plat->tx_queues_cfg[queue].send_slope,
-+ priv->plat->tx_queues_cfg[queue].idle_slope,
-+ priv->plat->tx_queues_cfg[queue].high_credit,
-+ priv->plat->tx_queues_cfg[queue].low_credit,
-+ queue);
-+ }
-+}
-+
-+/**
-+ * stmmac_rx_queue_dma_chan_map - Map RX queue to RX dma channel
-+ * @priv: driver private structure
-+ * Description: It is used for mapping RX queues to RX dma channels
-+ */
-+static void stmmac_rx_queue_dma_chan_map(struct stmmac_priv *priv)
-+{
-+ u32 rx_queues_count = priv->plat->rx_queues_to_use;
-+ u32 queue;
-+ u32 chan;
-+
-+ for (queue = 0; queue < rx_queues_count; queue++) {
-+ chan = priv->plat->rx_queues_cfg[queue].chan;
-+ priv->hw->mac->map_mtl_to_dma(priv->hw, queue, chan);
-+ }
-+}
-+
-+/**
-+ * stmmac_mac_config_rx_queues_prio - Configure RX Queue priority
-+ * @priv: driver private structure
-+ * Description: It is used for configuring the RX Queue Priority
-+ */
-+static void stmmac_mac_config_rx_queues_prio(struct stmmac_priv *priv)
-+{
-+ u32 rx_queues_count = priv->plat->rx_queues_to_use;
-+ u32 queue;
-+ u32 prio;
-+
-+ for (queue = 0; queue < rx_queues_count; queue++) {
-+ if (!priv->plat->rx_queues_cfg[queue].use_prio)
-+ continue;
-+
-+ prio = priv->plat->rx_queues_cfg[queue].prio;
-+ priv->hw->mac->rx_queue_prio(priv->hw, prio, queue);
-+ }
-+}
-+
-+/**
-+ * stmmac_mac_config_tx_queues_prio - Configure TX Queue priority
-+ * @priv: driver private structure
-+ * Description: It is used for configuring the TX Queue Priority
-+ */
-+static void stmmac_mac_config_tx_queues_prio(struct stmmac_priv *priv)
-+{
-+ u32 tx_queues_count = priv->plat->tx_queues_to_use;
-+ u32 queue;
-+ u32 prio;
-+
-+ for (queue = 0; queue < tx_queues_count; queue++) {
-+ if (!priv->plat->tx_queues_cfg[queue].use_prio)
-+ continue;
-+
-+ prio = priv->plat->tx_queues_cfg[queue].prio;
-+ priv->hw->mac->tx_queue_prio(priv->hw, prio, queue);
-+ }
-+}
-+
-+/**
-+ * stmmac_mac_config_rx_queues_routing - Configure RX Queue Routing
-+ * @priv: driver private structure
-+ * Description: It is used for configuring the RX queue routing
-+ */
-+static void stmmac_mac_config_rx_queues_routing(struct stmmac_priv *priv)
-+{
-+ u32 rx_queues_count = priv->plat->rx_queues_to_use;
-+ u32 queue;
-+ u8 packet;
-+
-+ for (queue = 0; queue < rx_queues_count; queue++) {
-+ /* no specific packet type routing specified for the queue */
-+ if (priv->plat->rx_queues_cfg[queue].pkt_route == 0x0)
-+ continue;
-+
-+ packet = priv->plat->rx_queues_cfg[queue].pkt_route;
-+ priv->hw->mac->rx_queue_prio(priv->hw, packet, queue);
-+ }
-+}
-+
-+/**
-+ * stmmac_mtl_configuration - Configure MTL
-+ * @priv: driver private structure
-+ * Description: It is used for configurring MTL
-+ */
-+static void stmmac_mtl_configuration(struct stmmac_priv *priv)
-+{
-+ u32 rx_queues_count = priv->plat->rx_queues_to_use;
-+ u32 tx_queues_count = priv->plat->tx_queues_to_use;
-+
-+ if (tx_queues_count > 1 && priv->hw->mac->set_mtl_tx_queue_weight)
-+ stmmac_set_tx_queue_weight(priv);
-+
-+ /* Configure MTL RX algorithms */
-+ if (rx_queues_count > 1 && priv->hw->mac->prog_mtl_rx_algorithms)
-+ priv->hw->mac->prog_mtl_rx_algorithms(priv->hw,
-+ priv->plat->rx_sched_algorithm);
-+
-+ /* Configure MTL TX algorithms */
-+ if (tx_queues_count > 1 && priv->hw->mac->prog_mtl_tx_algorithms)
-+ priv->hw->mac->prog_mtl_tx_algorithms(priv->hw,
-+ priv->plat->tx_sched_algorithm);
-+
-+ /* Configure CBS in AVB TX queues */
-+ if (tx_queues_count > 1 && priv->hw->mac->config_cbs)
-+ stmmac_configure_cbs(priv);
-+
-+ /* Map RX MTL to DMA channels */
-+ if (priv->hw->mac->map_mtl_to_dma)
-+ stmmac_rx_queue_dma_chan_map(priv);
-+
-+ /* Enable MAC RX Queues */
-+ if (priv->hw->mac->rx_queue_enable)
-+ stmmac_mac_enable_rx_queues(priv);
-+
-+ /* Set RX priorities */
-+ if (rx_queues_count > 1 && priv->hw->mac->rx_queue_prio)
-+ stmmac_mac_config_rx_queues_prio(priv);
-+
-+ /* Set TX priorities */
-+ if (tx_queues_count > 1 && priv->hw->mac->tx_queue_prio)
-+ stmmac_mac_config_tx_queues_prio(priv);
-+
-+ /* Set RX routing */
-+ if (rx_queues_count > 1 && priv->hw->mac->rx_queue_routing)
-+ stmmac_mac_config_rx_queues_routing(priv);
-+}
-+
- /**
- * stmmac_hw_setup - setup mac in a usable state.
- * @dev : pointer to the device structure.
-@@ -1679,6 +2441,9 @@ static void stmmac_init_tx_coalesce(stru
- static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
- {
- struct stmmac_priv *priv = netdev_priv(dev);
-+ u32 rx_cnt = priv->plat->rx_queues_to_use;
-+ u32 tx_cnt = priv->plat->tx_queues_to_use;
-+ u32 chan;
- int ret;
-
- /* DMA initialization and SW reset */
-@@ -1708,9 +2473,9 @@ static int stmmac_hw_setup(struct net_de
- /* Initialize the MAC Core */
- priv->hw->mac->core_init(priv->hw, dev->mtu);
-
-- /* Initialize MAC RX Queues */
-- if (priv->hw->mac->rx_queue_enable)
-- stmmac_mac_enable_rx_queues(priv);
-+ /* Initialize MTL*/
-+ if (priv->synopsys_id >= DWMAC_CORE_4_00)
-+ stmmac_mtl_configuration(priv);
-
- ret = priv->hw->mac->rx_ipc(priv->hw);
- if (!ret) {
-@@ -1720,10 +2485,7 @@ static int stmmac_hw_setup(struct net_de
- }
-
- /* Enable the MAC Rx/Tx */
-- if (priv->synopsys_id >= DWMAC_CORE_4_00)
-- stmmac_dwmac4_set_mac(priv->ioaddr, true);
-- else
-- stmmac_set_mac(priv->ioaddr, true);
-+ priv->hw->mac->set_mac(priv->ioaddr, true);
-
- /* Set the HW DMA mode and the COE */
- stmmac_dma_operation_mode(priv);
-@@ -1731,6 +2493,10 @@ static int stmmac_hw_setup(struct net_de
- stmmac_mmc_setup(priv);
-
- if (init_ptp) {
-+ ret = clk_prepare_enable(priv->plat->clk_ptp_ref);
-+ if (ret < 0)
-+ netdev_warn(priv->dev, "failed to enable PTP reference clock: %d\n", ret);
-+
- ret = stmmac_init_ptp(priv);
- if (ret == -EOPNOTSUPP)
- netdev_warn(priv->dev, "PTP not supported by HW\n");
-@@ -1745,35 +2511,37 @@ static int stmmac_hw_setup(struct net_de
- __func__);
- #endif
- /* Start the ball rolling... */
-- netdev_dbg(priv->dev, "DMA RX/TX processes started...\n");
-- priv->hw->dma->start_tx(priv->ioaddr);
-- priv->hw->dma->start_rx(priv->ioaddr);
-+ stmmac_start_all_dma(priv);
-
- priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
-
- if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
- priv->rx_riwt = MAX_DMA_RIWT;
-- priv->hw->dma->rx_watchdog(priv->ioaddr, MAX_DMA_RIWT);
-+ priv->hw->dma->rx_watchdog(priv->ioaddr, MAX_DMA_RIWT, rx_cnt);
- }
-
- if (priv->hw->pcs && priv->hw->mac->pcs_ctrl_ane)
- priv->hw->mac->pcs_ctrl_ane(priv->hw, 1, priv->hw->ps, 0);
-
-- /* set TX ring length */
-- if (priv->hw->dma->set_tx_ring_len)
-- priv->hw->dma->set_tx_ring_len(priv->ioaddr,
-- (DMA_TX_SIZE - 1));
-- /* set RX ring length */
-- if (priv->hw->dma->set_rx_ring_len)
-- priv->hw->dma->set_rx_ring_len(priv->ioaddr,
-- (DMA_RX_SIZE - 1));
-+ /* set TX and RX rings length */
-+ stmmac_set_rings_length(priv);
-+
- /* Enable TSO */
-- if (priv->tso)
-- priv->hw->dma->enable_tso(priv->ioaddr, 1, STMMAC_CHAN0);
-+ if (priv->tso) {
-+ for (chan = 0; chan < tx_cnt; chan++)
-+ priv->hw->dma->enable_tso(priv->ioaddr, 1, chan);
-+ }
-
- return 0;
- }
-
-+static void stmmac_hw_teardown(struct net_device *dev)
-+{
-+ struct stmmac_priv *priv = netdev_priv(dev);
-+
-+ clk_disable_unprepare(priv->plat->clk_ptp_ref);
-+}
-+
- /**
- * stmmac_open - open entry point of the driver
- * @dev : pointer to the device structure.
-@@ -1842,7 +2610,7 @@ static int stmmac_open(struct net_device
- netdev_err(priv->dev,
- "%s: ERROR: allocating the IRQ %d (error: %d)\n",
- __func__, dev->irq, ret);
-- goto init_error;
-+ goto irq_error;
- }
-
- /* Request the Wake IRQ in case of another line is used for WoL */
-@@ -1869,8 +2637,8 @@ static int stmmac_open(struct net_device
- }
- }
-
-- napi_enable(&priv->napi);
-- netif_start_queue(dev);
-+ stmmac_enable_all_queues(priv);
-+ stmmac_start_all_queues(priv);
-
- return 0;
-
-@@ -1879,7 +2647,12 @@ lpiirq_error:
- free_irq(priv->wol_irq, dev);
- wolirq_error:
- free_irq(dev->irq, dev);
-+irq_error:
-+ if (dev->phydev)
-+ phy_stop(dev->phydev);
-
-+ del_timer_sync(&priv->txtimer);
-+ stmmac_hw_teardown(dev);
- init_error:
- free_dma_desc_resources(priv);
- dma_desc_error:
-@@ -1908,9 +2681,9 @@ static int stmmac_release(struct net_dev
- phy_disconnect(dev->phydev);
- }
-
-- netif_stop_queue(dev);
-+ stmmac_stop_all_queues(priv);
-
-- napi_disable(&priv->napi);
-+ stmmac_disable_all_queues(priv);
-
- del_timer_sync(&priv->txtimer);
-
-@@ -1922,14 +2695,13 @@ static int stmmac_release(struct net_dev
- free_irq(priv->lpi_irq, dev);
-
- /* Stop TX/RX DMA and clear the descriptors */
-- priv->hw->dma->stop_tx(priv->ioaddr);
-- priv->hw->dma->stop_rx(priv->ioaddr);
-+ stmmac_stop_all_dma(priv);
-
- /* Release and free the Rx/Tx resources */
- free_dma_desc_resources(priv);
-
- /* Disable the MAC Rx/Tx */
-- stmmac_set_mac(priv->ioaddr, false);
-+ priv->hw->mac->set_mac(priv->ioaddr, false);
-
- netif_carrier_off(dev);
-
-@@ -1948,22 +2720,24 @@ static int stmmac_release(struct net_dev
- * @des: buffer start address
- * @total_len: total length to fill in descriptors
- * @last_segmant: condition for the last descriptor
-+ * @queue: TX queue index
- * Description:
- * This function fills descriptor and request new descriptors according to
- * buffer length to fill
- */
- static void stmmac_tso_allocator(struct stmmac_priv *priv, unsigned int des,
-- int total_len, bool last_segment)
-+ int total_len, bool last_segment, u32 queue)
- {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
- struct dma_desc *desc;
-- int tmp_len;
- u32 buff_size;
-+ int tmp_len;
-
- tmp_len = total_len;
-
- while (tmp_len > 0) {
-- priv->cur_tx = STMMAC_GET_ENTRY(priv->cur_tx, DMA_TX_SIZE);
-- desc = priv->dma_tx + priv->cur_tx;
-+ tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, DMA_TX_SIZE);
-+ desc = tx_q->dma_tx + tx_q->cur_tx;
-
- desc->des0 = cpu_to_le32(des + (total_len - tmp_len));
- buff_size = tmp_len >= TSO_MAX_BUFF_SIZE ?
-@@ -1971,7 +2745,7 @@ static void stmmac_tso_allocator(struct
-
- priv->hw->desc->prepare_tso_tx_desc(desc, 0, buff_size,
- 0, 1,
-- (last_segment) && (buff_size < TSO_MAX_BUFF_SIZE),
-+ (last_segment) && (tmp_len <= TSO_MAX_BUFF_SIZE),
- 0, 0);
-
- tmp_len -= TSO_MAX_BUFF_SIZE;
-@@ -2007,23 +2781,28 @@ static void stmmac_tso_allocator(struct
- */
- static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
- {
-- u32 pay_len, mss;
-- int tmp_pay_len = 0;
-+ struct dma_desc *desc, *first, *mss_desc = NULL;
- struct stmmac_priv *priv = netdev_priv(dev);
- int nfrags = skb_shinfo(skb)->nr_frags;
-+ u32 queue = skb_get_queue_mapping(skb);
- unsigned int first_entry, des;
-- struct dma_desc *desc, *first, *mss_desc = NULL;
-+ struct stmmac_tx_queue *tx_q;
-+ int tmp_pay_len = 0;
-+ u32 pay_len, mss;
- u8 proto_hdr_len;
- int i;
-
-+ tx_q = &priv->tx_queue[queue];
-+
- /* Compute header lengths */
- proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-
- /* Desc availability based on threshold should be enough safe */
-- if (unlikely(stmmac_tx_avail(priv) <
-+ if (unlikely(stmmac_tx_avail(priv, queue) <
- (((skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1)))) {
-- if (!netif_queue_stopped(dev)) {
-- netif_stop_queue(dev);
-+ if (!netif_tx_queue_stopped(netdev_get_tx_queue(dev, queue))) {
-+ netif_tx_stop_queue(netdev_get_tx_queue(priv->dev,
-+ queue));
- /* This is a hard error, log it. */
- netdev_err(priv->dev,
- "%s: Tx Ring full when queue awake\n",
-@@ -2038,10 +2817,10 @@ static netdev_tx_t stmmac_tso_xmit(struc
-
- /* set new MSS value if needed */
- if (mss != priv->mss) {
-- mss_desc = priv->dma_tx + priv->cur_tx;
-+ mss_desc = tx_q->dma_tx + tx_q->cur_tx;
- priv->hw->desc->set_mss(mss_desc, mss);
- priv->mss = mss;
-- priv->cur_tx = STMMAC_GET_ENTRY(priv->cur_tx, DMA_TX_SIZE);
-+ tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, DMA_TX_SIZE);
- }
-
- if (netif_msg_tx_queued(priv)) {
-@@ -2051,9 +2830,9 @@ static netdev_tx_t stmmac_tso_xmit(struc
- skb->data_len);
- }
-
-- first_entry = priv->cur_tx;
-+ first_entry = tx_q->cur_tx;
-
-- desc = priv->dma_tx + first_entry;
-+ desc = tx_q->dma_tx + first_entry;
- first = desc;
-
- /* first descriptor: fill Headers on Buf1 */
-@@ -2062,9 +2841,8 @@ static netdev_tx_t stmmac_tso_xmit(struc
- if (dma_mapping_error(priv->device, des))
- goto dma_map_err;
-
-- priv->tx_skbuff_dma[first_entry].buf = des;
-- priv->tx_skbuff_dma[first_entry].len = skb_headlen(skb);
-- priv->tx_skbuff[first_entry] = skb;
-+ tx_q->tx_skbuff_dma[first_entry].buf = des;
-+ tx_q->tx_skbuff_dma[first_entry].len = skb_headlen(skb);
-
- first->des0 = cpu_to_le32(des);
-
-@@ -2075,7 +2853,7 @@ static netdev_tx_t stmmac_tso_xmit(struc
- /* If needed take extra descriptors to fill the remaining payload */
- tmp_pay_len = pay_len - TSO_MAX_BUFF_SIZE;
-
-- stmmac_tso_allocator(priv, des, tmp_pay_len, (nfrags == 0));
-+ stmmac_tso_allocator(priv, des, tmp_pay_len, (nfrags == 0), queue);
-
- /* Prepare fragments */
- for (i = 0; i < nfrags; i++) {
-@@ -2084,24 +2862,34 @@ static netdev_tx_t stmmac_tso_xmit(struc
- des = skb_frag_dma_map(priv->device, frag, 0,
- skb_frag_size(frag),
- DMA_TO_DEVICE);
-+ if (dma_mapping_error(priv->device, des))
-+ goto dma_map_err;
-
- stmmac_tso_allocator(priv, des, skb_frag_size(frag),
-- (i == nfrags - 1));
-+ (i == nfrags - 1), queue);
-
-- priv->tx_skbuff_dma[priv->cur_tx].buf = des;
-- priv->tx_skbuff_dma[priv->cur_tx].len = skb_frag_size(frag);
-- priv->tx_skbuff[priv->cur_tx] = NULL;
-- priv->tx_skbuff_dma[priv->cur_tx].map_as_page = true;
-+ tx_q->tx_skbuff_dma[tx_q->cur_tx].buf = des;
-+ tx_q->tx_skbuff_dma[tx_q->cur_tx].len = skb_frag_size(frag);
-+ tx_q->tx_skbuff[tx_q->cur_tx] = NULL;
-+ tx_q->tx_skbuff_dma[tx_q->cur_tx].map_as_page = true;
- }
-
-- priv->tx_skbuff_dma[priv->cur_tx].last_segment = true;
-+ tx_q->tx_skbuff_dma[tx_q->cur_tx].last_segment = true;
-+
-+ /* Only the last descriptor gets to point to the skb. */
-+ tx_q->tx_skbuff[tx_q->cur_tx] = skb;
-
-- priv->cur_tx = STMMAC_GET_ENTRY(priv->cur_tx, DMA_TX_SIZE);
-+ /* We've used all descriptors we need for this skb, however,
-+ * advance cur_tx so that it references a fresh descriptor.
-+ * ndo_start_xmit will fill this descriptor the next time it's
-+ * called and stmmac_tx_clean may clean up to this descriptor.
-+ */
-+ tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, DMA_TX_SIZE);
-
-- if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
-+ if (unlikely(stmmac_tx_avail(priv, queue) <= (MAX_SKB_FRAGS + 1))) {
- netif_dbg(priv, hw, priv->dev, "%s: stop transmitted packets\n",
- __func__);
-- netif_stop_queue(dev);
-+ netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, queue));
- }
-
- dev->stats.tx_bytes += skb->len;
-@@ -2133,7 +2921,7 @@ static netdev_tx_t stmmac_tso_xmit(struc
- priv->hw->desc->prepare_tso_tx_desc(first, 1,
- proto_hdr_len,
- pay_len,
-- 1, priv->tx_skbuff_dma[first_entry].last_segment,
-+ 1, tx_q->tx_skbuff_dma[first_entry].last_segment,
- tcp_hdrlen(skb) / 4, (skb->len - proto_hdr_len));
-
- /* If context desc is used to change MSS */
-@@ -2155,20 +2943,20 @@ static netdev_tx_t stmmac_tso_xmit(struc
-
- if (netif_msg_pktdata(priv)) {
- pr_info("%s: curr=%d dirty=%d f=%d, e=%d, f_p=%p, nfrags %d\n",
-- __func__, priv->cur_tx, priv->dirty_tx, first_entry,
-- priv->cur_tx, first, nfrags);
-+ __func__, tx_q->cur_tx, tx_q->dirty_tx, first_entry,
-+ tx_q->cur_tx, first, nfrags);
-
-- priv->hw->desc->display_ring((void *)priv->dma_tx, DMA_TX_SIZE,
-+ priv->hw->desc->display_ring((void *)tx_q->dma_tx, DMA_TX_SIZE,
- 0);
-
- pr_info(">>> frame to be transmitted: ");
- print_pkt(skb->data, skb_headlen(skb));
- }
-
-- netdev_sent_queue(dev, skb->len);
-+ netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
-
-- priv->hw->dma->set_tx_tail_ptr(priv->ioaddr, priv->tx_tail_addr,
-- STMMAC_CHAN0);
-+ priv->hw->dma->set_tx_tail_ptr(priv->ioaddr, tx_q->tx_tail_addr,
-+ queue);
-
- return NETDEV_TX_OK;
-
-@@ -2192,21 +2980,27 @@ static netdev_tx_t stmmac_xmit(struct sk
- struct stmmac_priv *priv = netdev_priv(dev);
- unsigned int nopaged_len = skb_headlen(skb);
- int i, csum_insertion = 0, is_jumbo = 0;
-+ u32 queue = skb_get_queue_mapping(skb);
- int nfrags = skb_shinfo(skb)->nr_frags;
-- unsigned int entry, first_entry;
-+ int entry;
-+ unsigned int first_entry;
- struct dma_desc *desc, *first;
-+ struct stmmac_tx_queue *tx_q;
- unsigned int enh_desc;
- unsigned int des;
-
-+ tx_q = &priv->tx_queue[queue];
-+
- /* Manage oversized TCP frames for GMAC4 device */
- if (skb_is_gso(skb) && priv->tso) {
- if (ip_hdr(skb)->protocol == IPPROTO_TCP)
- return stmmac_tso_xmit(skb, dev);
- }
-
-- if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) {
-- if (!netif_queue_stopped(dev)) {
-- netif_stop_queue(dev);
-+ if (unlikely(stmmac_tx_avail(priv, queue) < nfrags + 1)) {
-+ if (!netif_tx_queue_stopped(netdev_get_tx_queue(dev, queue))) {
-+ netif_tx_stop_queue(netdev_get_tx_queue(priv->dev,
-+ queue));
- /* This is a hard error, log it. */
- netdev_err(priv->dev,
- "%s: Tx Ring full when queue awake\n",
-@@ -2218,20 +3012,18 @@ static netdev_tx_t stmmac_xmit(struct sk
- if (priv->tx_path_in_lpi_mode)
- stmmac_disable_eee_mode(priv);
-
-- entry = priv->cur_tx;
-+ entry = tx_q->cur_tx;
- first_entry = entry;
-
- csum_insertion = (skb->ip_summed == CHECKSUM_PARTIAL);
-
- if (likely(priv->extend_desc))
-- desc = (struct dma_desc *)(priv->dma_etx + entry);
-+ desc = (struct dma_desc *)(tx_q->dma_etx + entry);
- else
-- desc = priv->dma_tx + entry;
-+ desc = tx_q->dma_tx + entry;
-
- first = desc;
-
-- priv->tx_skbuff[first_entry] = skb;
--
- enh_desc = priv->plat->enh_desc;
- /* To program the descriptors according to the size of the frame */
- if (enh_desc)
-@@ -2239,7 +3031,7 @@ static netdev_tx_t stmmac_xmit(struct sk
-
- if (unlikely(is_jumbo) && likely(priv->synopsys_id <
- DWMAC_CORE_4_00)) {
-- entry = priv->hw->mode->jumbo_frm(priv, skb, csum_insertion);
-+ entry = priv->hw->mode->jumbo_frm(tx_q, skb, csum_insertion);
- if (unlikely(entry < 0))
- goto dma_map_err;
- }
-@@ -2252,48 +3044,56 @@ static netdev_tx_t stmmac_xmit(struct sk
- entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
-
- if (likely(priv->extend_desc))
-- desc = (struct dma_desc *)(priv->dma_etx + entry);
-+ desc = (struct dma_desc *)(tx_q->dma_etx + entry);
- else
-- desc = priv->dma_tx + entry;
-+ desc = tx_q->dma_tx + entry;
-
- des = skb_frag_dma_map(priv->device, frag, 0, len,
- DMA_TO_DEVICE);
- if (dma_mapping_error(priv->device, des))
- goto dma_map_err; /* should reuse desc w/o issues */
-
-- priv->tx_skbuff[entry] = NULL;
-+ tx_q->tx_skbuff[entry] = NULL;
-
-- priv->tx_skbuff_dma[entry].buf = des;
-+ tx_q->tx_skbuff_dma[entry].buf = des;
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00))
- desc->des0 = cpu_to_le32(des);
- else
- desc->des2 = cpu_to_le32(des);
-
-- priv->tx_skbuff_dma[entry].map_as_page = true;
-- priv->tx_skbuff_dma[entry].len = len;
-- priv->tx_skbuff_dma[entry].last_segment = last_segment;
-+ tx_q->tx_skbuff_dma[entry].map_as_page = true;
-+ tx_q->tx_skbuff_dma[entry].len = len;
-+ tx_q->tx_skbuff_dma[entry].last_segment = last_segment;
-
- /* Prepare the descriptor and set the own bit too */
- priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion,
-- priv->mode, 1, last_segment);
-+ priv->mode, 1, last_segment,
-+ skb->len);
- }
-
-- entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
-+ /* Only the last descriptor gets to point to the skb. */
-+ tx_q->tx_skbuff[entry] = skb;
-
-- priv->cur_tx = entry;
-+ /* We've used all descriptors we need for this skb, however,
-+ * advance cur_tx so that it references a fresh descriptor.
-+ * ndo_start_xmit will fill this descriptor the next time it's
-+ * called and stmmac_tx_clean may clean up to this descriptor.
-+ */
-+ entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
-+ tx_q->cur_tx = entry;
-
- if (netif_msg_pktdata(priv)) {
- void *tx_head;
-
- netdev_dbg(priv->dev,
- "%s: curr=%d dirty=%d f=%d, e=%d, first=%p, nfrags=%d",
-- __func__, priv->cur_tx, priv->dirty_tx, first_entry,
-+ __func__, tx_q->cur_tx, tx_q->dirty_tx, first_entry,
- entry, first, nfrags);
-
- if (priv->extend_desc)
-- tx_head = (void *)priv->dma_etx;
-+ tx_head = (void *)tx_q->dma_etx;
- else
-- tx_head = (void *)priv->dma_tx;
-+ tx_head = (void *)tx_q->dma_tx;
-
- priv->hw->desc->display_ring(tx_head, DMA_TX_SIZE, false);
-
-@@ -2301,10 +3101,10 @@ static netdev_tx_t stmmac_xmit(struct sk
- print_pkt(skb->data, skb->len);
- }
-
-- if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
-+ if (unlikely(stmmac_tx_avail(priv, queue) <= (MAX_SKB_FRAGS + 1))) {
- netif_dbg(priv, hw, priv->dev, "%s: stop transmitted packets\n",
- __func__);
-- netif_stop_queue(dev);
-+ netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, queue));
- }
-
- dev->stats.tx_bytes += skb->len;
-@@ -2339,14 +3139,14 @@ static netdev_tx_t stmmac_xmit(struct sk
- if (dma_mapping_error(priv->device, des))
- goto dma_map_err;
-
-- priv->tx_skbuff_dma[first_entry].buf = des;
-+ tx_q->tx_skbuff_dma[first_entry].buf = des;
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00))
- first->des0 = cpu_to_le32(des);
- else
- first->des2 = cpu_to_le32(des);
-
-- priv->tx_skbuff_dma[first_entry].len = nopaged_len;
-- priv->tx_skbuff_dma[first_entry].last_segment = last_segment;
-+ tx_q->tx_skbuff_dma[first_entry].len = nopaged_len;
-+ tx_q->tx_skbuff_dma[first_entry].last_segment = last_segment;
-
- if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
- priv->hwts_tx_en)) {
-@@ -2358,7 +3158,7 @@ static netdev_tx_t stmmac_xmit(struct sk
- /* Prepare the first descriptor setting the OWN bit too */
- priv->hw->desc->prepare_tx_desc(first, 1, nopaged_len,
- csum_insertion, priv->mode, 1,
-- last_segment);
-+ last_segment, skb->len);
-
- /* The own bit must be the latest setting done when prepare the
- * descriptor and then barrier is needed to make sure that
-@@ -2367,13 +3167,13 @@ static netdev_tx_t stmmac_xmit(struct sk
- dma_wmb();
- }
-
-- netdev_sent_queue(dev, skb->len);
-+ netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
-
- if (priv->synopsys_id < DWMAC_CORE_4_00)
- priv->hw->dma->enable_dma_transmission(priv->ioaddr);
- else
-- priv->hw->dma->set_tx_tail_ptr(priv->ioaddr, priv->tx_tail_addr,
-- STMMAC_CHAN0);
-+ priv->hw->dma->set_tx_tail_ptr(priv->ioaddr, tx_q->tx_tail_addr,
-+ queue);
-
- return NETDEV_TX_OK;
-
-@@ -2401,9 +3201,9 @@ static void stmmac_rx_vlan(struct net_de
- }
-
-
--static inline int stmmac_rx_threshold_count(struct stmmac_priv *priv)
-+static inline int stmmac_rx_threshold_count(struct stmmac_rx_queue *rx_q)
- {
-- if (priv->rx_zeroc_thresh < STMMAC_RX_THRESH)
-+ if (rx_q->rx_zeroc_thresh < STMMAC_RX_THRESH)
- return 0;
-
- return 1;
-@@ -2412,30 +3212,33 @@ static inline int stmmac_rx_threshold_co
- /**
- * stmmac_rx_refill - refill used skb preallocated buffers
- * @priv: driver private structure
-+ * @queue: RX queue index
- * Description : this is to reallocate the skb for the reception process
- * that is based on zero-copy.
- */
--static inline void stmmac_rx_refill(struct stmmac_priv *priv)
-+static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
- {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+ int dirty = stmmac_rx_dirty(priv, queue);
-+ unsigned int entry = rx_q->dirty_rx;
-+
- int bfsize = priv->dma_buf_sz;
-- unsigned int entry = priv->dirty_rx;
-- int dirty = stmmac_rx_dirty(priv);
-
- while (dirty-- > 0) {
- struct dma_desc *p;
-
- if (priv->extend_desc)
-- p = (struct dma_desc *)(priv->dma_erx + entry);
-+ p = (struct dma_desc *)(rx_q->dma_erx + entry);
- else
-- p = priv->dma_rx + entry;
-+ p = rx_q->dma_rx + entry;
-
-- if (likely(priv->rx_skbuff[entry] == NULL)) {
-+ if (likely(!rx_q->rx_skbuff[entry])) {
- struct sk_buff *skb;
-
- skb = netdev_alloc_skb_ip_align(priv->dev, bfsize);
- if (unlikely(!skb)) {
- /* so for a while no zero-copy! */
-- priv->rx_zeroc_thresh = STMMAC_RX_THRESH;
-+ rx_q->rx_zeroc_thresh = STMMAC_RX_THRESH;
- if (unlikely(net_ratelimit()))
- dev_err(priv->device,
- "fail to alloc skb entry %d\n",
-@@ -2443,28 +3246,28 @@ static inline void stmmac_rx_refill(stru
- break;
- }
-
-- priv->rx_skbuff[entry] = skb;
-- priv->rx_skbuff_dma[entry] =
-+ rx_q->rx_skbuff[entry] = skb;
-+ rx_q->rx_skbuff_dma[entry] =
- dma_map_single(priv->device, skb->data, bfsize,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(priv->device,
-- priv->rx_skbuff_dma[entry])) {
-+ rx_q->rx_skbuff_dma[entry])) {
- netdev_err(priv->dev, "Rx DMA map failed\n");
- dev_kfree_skb(skb);
- break;
- }
-
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00)) {
-- p->des0 = cpu_to_le32(priv->rx_skbuff_dma[entry]);
-+ p->des0 = cpu_to_le32(rx_q->rx_skbuff_dma[entry]);
- p->des1 = 0;
- } else {
-- p->des2 = cpu_to_le32(priv->rx_skbuff_dma[entry]);
-+ p->des2 = cpu_to_le32(rx_q->rx_skbuff_dma[entry]);
- }
- if (priv->hw->mode->refill_desc3)
-- priv->hw->mode->refill_desc3(priv, p);
-+ priv->hw->mode->refill_desc3(rx_q, p);
-
-- if (priv->rx_zeroc_thresh > 0)
-- priv->rx_zeroc_thresh--;
-+ if (rx_q->rx_zeroc_thresh > 0)
-+ rx_q->rx_zeroc_thresh--;
-
- netif_dbg(priv, rx_status, priv->dev,
- "refill entry #%d\n", entry);
-@@ -2480,31 +3283,33 @@ static inline void stmmac_rx_refill(stru
-
- entry = STMMAC_GET_ENTRY(entry, DMA_RX_SIZE);
- }
-- priv->dirty_rx = entry;
-+ rx_q->dirty_rx = entry;
- }
-
- /**
- * stmmac_rx - manage the receive process
- * @priv: driver private structure
-- * @limit: napi bugget.
-+ * @limit: napi bugget
-+ * @queue: RX queue index.
- * Description : this the function called by the napi poll method.
- * It gets all the frames inside the ring.
- */
--static int stmmac_rx(struct stmmac_priv *priv, int limit)
-+static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
- {
-- unsigned int entry = priv->cur_rx;
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+ unsigned int entry = rx_q->cur_rx;
-+ int coe = priv->hw->rx_csum;
- unsigned int next_entry;
- unsigned int count = 0;
-- int coe = priv->hw->rx_csum;
-
- if (netif_msg_rx_status(priv)) {
- void *rx_head;
-
- netdev_dbg(priv->dev, "%s: descriptor ring:\n", __func__);
- if (priv->extend_desc)
-- rx_head = (void *)priv->dma_erx;
-+ rx_head = (void *)rx_q->dma_erx;
- else
-- rx_head = (void *)priv->dma_rx;
-+ rx_head = (void *)rx_q->dma_rx;
-
- priv->hw->desc->display_ring(rx_head, DMA_RX_SIZE, true);
- }
-@@ -2514,9 +3319,9 @@ static int stmmac_rx(struct stmmac_priv
- struct dma_desc *np;
-
- if (priv->extend_desc)
-- p = (struct dma_desc *)(priv->dma_erx + entry);
-+ p = (struct dma_desc *)(rx_q->dma_erx + entry);
- else
-- p = priv->dma_rx + entry;
-+ p = rx_q->dma_rx + entry;
-
- /* read the status of the incoming frame */
- status = priv->hw->desc->rx_status(&priv->dev->stats,
-@@ -2527,20 +3332,20 @@ static int stmmac_rx(struct stmmac_priv
-
- count++;
-
-- priv->cur_rx = STMMAC_GET_ENTRY(priv->cur_rx, DMA_RX_SIZE);
-- next_entry = priv->cur_rx;
-+ rx_q->cur_rx = STMMAC_GET_ENTRY(rx_q->cur_rx, DMA_RX_SIZE);
-+ next_entry = rx_q->cur_rx;
-
- if (priv->extend_desc)
-- np = (struct dma_desc *)(priv->dma_erx + next_entry);
-+ np = (struct dma_desc *)(rx_q->dma_erx + next_entry);
- else
-- np = priv->dma_rx + next_entry;
-+ np = rx_q->dma_rx + next_entry;
-
- prefetch(np);
-
- if ((priv->extend_desc) && (priv->hw->desc->rx_extended_status))
- priv->hw->desc->rx_extended_status(&priv->dev->stats,
- &priv->xstats,
-- priv->dma_erx +
-+ rx_q->dma_erx +
- entry);
- if (unlikely(status == discard_frame)) {
- priv->dev->stats.rx_errors++;
-@@ -2550,9 +3355,9 @@ static int stmmac_rx(struct stmmac_priv
- * them in stmmac_rx_refill() function so that
- * device can reuse it.
- */
-- priv->rx_skbuff[entry] = NULL;
-+ rx_q->rx_skbuff[entry] = NULL;
- dma_unmap_single(priv->device,
-- priv->rx_skbuff_dma[entry],
-+ rx_q->rx_skbuff_dma[entry],
- priv->dma_buf_sz,
- DMA_FROM_DEVICE);
- }
-@@ -2600,7 +3405,7 @@ static int stmmac_rx(struct stmmac_priv
- */
- if (unlikely(!priv->plat->has_gmac4 &&
- ((frame_len < priv->rx_copybreak) ||
-- stmmac_rx_threshold_count(priv)))) {
-+ stmmac_rx_threshold_count(rx_q)))) {
- skb = netdev_alloc_skb_ip_align(priv->dev,
- frame_len);
- if (unlikely(!skb)) {
-@@ -2612,21 +3417,21 @@ static int stmmac_rx(struct stmmac_priv
- }
-
- dma_sync_single_for_cpu(priv->device,
-- priv->rx_skbuff_dma
-+ rx_q->rx_skbuff_dma
- [entry], frame_len,
- DMA_FROM_DEVICE);
- skb_copy_to_linear_data(skb,
-- priv->
-+ rx_q->
- rx_skbuff[entry]->data,
- frame_len);
-
- skb_put(skb, frame_len);
- dma_sync_single_for_device(priv->device,
-- priv->rx_skbuff_dma
-+ rx_q->rx_skbuff_dma
- [entry], frame_len,
- DMA_FROM_DEVICE);
- } else {
-- skb = priv->rx_skbuff[entry];
-+ skb = rx_q->rx_skbuff[entry];
- if (unlikely(!skb)) {
- netdev_err(priv->dev,
- "%s: Inconsistent Rx chain\n",
-@@ -2635,12 +3440,12 @@ static int stmmac_rx(struct stmmac_priv
- break;
- }
- prefetch(skb->data - NET_IP_ALIGN);
-- priv->rx_skbuff[entry] = NULL;
-- priv->rx_zeroc_thresh++;
-+ rx_q->rx_skbuff[entry] = NULL;
-+ rx_q->rx_zeroc_thresh++;
-
- skb_put(skb, frame_len);
- dma_unmap_single(priv->device,
-- priv->rx_skbuff_dma[entry],
-+ rx_q->rx_skbuff_dma[entry],
- priv->dma_buf_sz,
- DMA_FROM_DEVICE);
- }
-@@ -2662,7 +3467,7 @@ static int stmmac_rx(struct stmmac_priv
- else
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-- napi_gro_receive(&priv->napi, skb);
-+ napi_gro_receive(&rx_q->napi, skb);
-
- priv->dev->stats.rx_packets++;
- priv->dev->stats.rx_bytes += frame_len;
-@@ -2670,7 +3475,7 @@ static int stmmac_rx(struct stmmac_priv
- entry = next_entry;
- }
-
-- stmmac_rx_refill(priv);
-+ stmmac_rx_refill(priv, queue);
-
- priv->xstats.rx_pkt_n += count;
-
-@@ -2687,16 +3492,24 @@ static int stmmac_rx(struct stmmac_priv
- */
- static int stmmac_poll(struct napi_struct *napi, int budget)
- {
-- struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi);
-+ struct stmmac_rx_queue *rx_q =
-+ container_of(napi, struct stmmac_rx_queue, napi);
-+ struct stmmac_priv *priv = rx_q->priv_data;
-+ u32 tx_count = priv->plat->tx_queues_to_use;
-+ u32 chan = rx_q->queue_index;
- int work_done = 0;
-+ u32 queue;
-
- priv->xstats.napi_poll++;
-- stmmac_tx_clean(priv);
-
-- work_done = stmmac_rx(priv, budget);
-+ /* check all the queues */
-+ for (queue = 0; queue < tx_count; queue++)
-+ stmmac_tx_clean(priv, queue);
-+
-+ work_done = stmmac_rx(priv, budget, rx_q->queue_index);
- if (work_done < budget) {
- napi_complete_done(napi, work_done);
-- stmmac_enable_dma_irq(priv);
-+ stmmac_enable_dma_irq(priv, chan);
- }
- return work_done;
- }
-@@ -2712,9 +3525,12 @@ static int stmmac_poll(struct napi_struc
- static void stmmac_tx_timeout(struct net_device *dev)
- {
- struct stmmac_priv *priv = netdev_priv(dev);
-+ u32 tx_count = priv->plat->tx_queues_to_use;
-+ u32 chan;
-
- /* Clear Tx resources and restart transmitting again */
-- stmmac_tx_err(priv);
-+ for (chan = 0; chan < tx_count; chan++)
-+ stmmac_tx_err(priv, chan);
- }
-
- /**
-@@ -2837,6 +3653,12 @@ static irqreturn_t stmmac_interrupt(int
- {
- struct net_device *dev = (struct net_device *)dev_id;
- struct stmmac_priv *priv = netdev_priv(dev);
-+ u32 rx_cnt = priv->plat->rx_queues_to_use;
-+ u32 tx_cnt = priv->plat->tx_queues_to_use;
-+ u32 queues_count;
-+ u32 queue;
-+
-+ queues_count = (rx_cnt > tx_cnt) ? rx_cnt : tx_cnt;
-
- if (priv->irq_wake)
- pm_wakeup_event(priv->device, 0);
-@@ -2850,16 +3672,30 @@ static irqreturn_t stmmac_interrupt(int
- if ((priv->plat->has_gmac) || (priv->plat->has_gmac4)) {
- int status = priv->hw->mac->host_irq_status(priv->hw,
- &priv->xstats);
-+
- if (unlikely(status)) {
- /* For LPI we need to save the tx status */
- if (status & CORE_IRQ_TX_PATH_IN_LPI_MODE)
- priv->tx_path_in_lpi_mode = true;
- if (status & CORE_IRQ_TX_PATH_EXIT_LPI_MODE)
- priv->tx_path_in_lpi_mode = false;
-- if (status & CORE_IRQ_MTL_RX_OVERFLOW && priv->hw->dma->set_rx_tail_ptr)
-- priv->hw->dma->set_rx_tail_ptr(priv->ioaddr,
-- priv->rx_tail_addr,
-- STMMAC_CHAN0);
-+ }
-+
-+ if (priv->synopsys_id >= DWMAC_CORE_4_00) {
-+ for (queue = 0; queue < queues_count; queue++) {
-+ struct stmmac_rx_queue *rx_q =
-+ &priv->rx_queue[queue];
-+
-+ status |=
-+ priv->hw->mac->host_mtl_irq_status(priv->hw,
-+ queue);
-+
-+ if (status & CORE_IRQ_MTL_RX_OVERFLOW &&
-+ priv->hw->dma->set_rx_tail_ptr)
-+ priv->hw->dma->set_rx_tail_ptr(priv->ioaddr,
-+ rx_q->rx_tail_addr,
-+ queue);
-+ }
- }
-
- /* PCS link status */
-@@ -2944,7 +3780,7 @@ static void sysfs_display_ring(void *hea
- ep++;
- } else {
- seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
-- i, (unsigned int)virt_to_phys(ep),
-+ i, (unsigned int)virt_to_phys(p),
- le32_to_cpu(p->des0), le32_to_cpu(p->des1),
- le32_to_cpu(p->des2), le32_to_cpu(p->des3));
- p++;
-@@ -2957,17 +3793,40 @@ static int stmmac_sysfs_ring_read(struct
- {
- struct net_device *dev = seq->private;
- struct stmmac_priv *priv = netdev_priv(dev);
-+ u32 rx_count = priv->plat->rx_queues_to_use;
-+ u32 tx_count = priv->plat->tx_queues_to_use;
-+ u32 queue;
-
-- if (priv->extend_desc) {
-- seq_printf(seq, "Extended RX descriptor ring:\n");
-- sysfs_display_ring((void *)priv->dma_erx, DMA_RX_SIZE, 1, seq);
-- seq_printf(seq, "Extended TX descriptor ring:\n");
-- sysfs_display_ring((void *)priv->dma_etx, DMA_TX_SIZE, 1, seq);
-- } else {
-- seq_printf(seq, "RX descriptor ring:\n");
-- sysfs_display_ring((void *)priv->dma_rx, DMA_RX_SIZE, 0, seq);
-- seq_printf(seq, "TX descriptor ring:\n");
-- sysfs_display_ring((void *)priv->dma_tx, DMA_TX_SIZE, 0, seq);
-+ for (queue = 0; queue < rx_count; queue++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+
-+ seq_printf(seq, "RX Queue %d:\n", queue);
-+
-+ if (priv->extend_desc) {
-+ seq_printf(seq, "Extended descriptor ring:\n");
-+ sysfs_display_ring((void *)rx_q->dma_erx,
-+ DMA_RX_SIZE, 1, seq);
-+ } else {
-+ seq_printf(seq, "Descriptor ring:\n");
-+ sysfs_display_ring((void *)rx_q->dma_rx,
-+ DMA_RX_SIZE, 0, seq);
-+ }
-+ }
-+
-+ for (queue = 0; queue < tx_count; queue++) {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
-+
-+ seq_printf(seq, "TX Queue %d:\n", queue);
-+
-+ if (priv->extend_desc) {
-+ seq_printf(seq, "Extended descriptor ring:\n");
-+ sysfs_display_ring((void *)tx_q->dma_etx,
-+ DMA_TX_SIZE, 1, seq);
-+ } else {
-+ seq_printf(seq, "Descriptor ring:\n");
-+ sysfs_display_ring((void *)tx_q->dma_tx,
-+ DMA_TX_SIZE, 0, seq);
-+ }
- }
-
- return 0;
-@@ -3250,11 +4109,14 @@ int stmmac_dvr_probe(struct device *devi
- struct plat_stmmacenet_data *plat_dat,
- struct stmmac_resources *res)
- {
-- int ret = 0;
- struct net_device *ndev = NULL;
- struct stmmac_priv *priv;
-+ int ret = 0;
-+ u32 queue;
-
-- ndev = alloc_etherdev(sizeof(struct stmmac_priv));
-+ ndev = alloc_etherdev_mqs(sizeof(struct stmmac_priv),
-+ MTL_MAX_TX_QUEUES,
-+ MTL_MAX_RX_QUEUES);
- if (!ndev)
- return -ENOMEM;
-
-@@ -3296,6 +4158,10 @@ int stmmac_dvr_probe(struct device *devi
- if (ret)
- goto error_hw_init;
-
-+ /* Configure real RX and TX queues */
-+ netif_set_real_num_rx_queues(ndev, priv->plat->rx_queues_to_use);
-+ netif_set_real_num_tx_queues(ndev, priv->plat->tx_queues_to_use);
-+
- ndev->netdev_ops = &stmmac_netdev_ops;
-
- ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
-@@ -3328,7 +4194,12 @@ int stmmac_dvr_probe(struct device *devi
- "Enable RX Mitigation via HW Watchdog Timer\n");
- }
-
-- netif_napi_add(ndev, &priv->napi, stmmac_poll, 64);
-+ for (queue = 0; queue < priv->plat->rx_queues_to_use; queue++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+
-+ netif_napi_add(ndev, &rx_q->napi, stmmac_poll,
-+ (8 * priv->plat->rx_queues_to_use));
-+ }
-
- spin_lock_init(&priv->lock);
-
-@@ -3373,7 +4244,11 @@ error_netdev_register:
- priv->hw->pcs != STMMAC_PCS_RTBI)
- stmmac_mdio_unregister(ndev);
- error_mdio_register:
-- netif_napi_del(&priv->napi);
-+ for (queue = 0; queue < priv->plat->rx_queues_to_use; queue++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+
-+ netif_napi_del(&rx_q->napi);
-+ }
- error_hw_init:
- free_netdev(ndev);
-
-@@ -3394,10 +4269,9 @@ int stmmac_dvr_remove(struct device *dev
-
- netdev_info(priv->dev, "%s: removing driver", __func__);
-
-- priv->hw->dma->stop_rx(priv->ioaddr);
-- priv->hw->dma->stop_tx(priv->ioaddr);
-+ stmmac_stop_all_dma(priv);
-
-- stmmac_set_mac(priv->ioaddr, false);
-+ priv->hw->mac->set_mac(priv->ioaddr, false);
- netif_carrier_off(ndev);
- unregister_netdev(ndev);
- if (priv->plat->stmmac_rst)
-@@ -3436,20 +4310,19 @@ int stmmac_suspend(struct device *dev)
- spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_detach(ndev);
-- netif_stop_queue(ndev);
-+ stmmac_stop_all_queues(priv);
-
-- napi_disable(&priv->napi);
-+ stmmac_disable_all_queues(priv);
-
- /* Stop TX/RX DMA */
-- priv->hw->dma->stop_tx(priv->ioaddr);
-- priv->hw->dma->stop_rx(priv->ioaddr);
-+ stmmac_stop_all_dma(priv);
-
- /* Enable Power down mode by programming the PMT regs */
- if (device_may_wakeup(priv->device)) {
- priv->hw->mac->pmt(priv->hw, priv->wolopts);
- priv->irq_wake = 1;
- } else {
-- stmmac_set_mac(priv->ioaddr, false);
-+ priv->hw->mac->set_mac(priv->ioaddr, false);
- pinctrl_pm_select_sleep_state(priv->device);
- /* Disable clock in case of PWM is off */
- clk_disable(priv->plat->pclk);
-@@ -3465,6 +4338,31 @@ int stmmac_suspend(struct device *dev)
- EXPORT_SYMBOL_GPL(stmmac_suspend);
-
- /**
-+ * stmmac_reset_queues_param - reset queue parameters
-+ * @dev: device pointer
-+ */
-+static void stmmac_reset_queues_param(struct stmmac_priv *priv)
-+{
-+ u32 rx_cnt = priv->plat->rx_queues_to_use;
-+ u32 tx_cnt = priv->plat->tx_queues_to_use;
-+ u32 queue;
-+
-+ for (queue = 0; queue < rx_cnt; queue++) {
-+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-+
-+ rx_q->cur_rx = 0;
-+ rx_q->dirty_rx = 0;
-+ }
-+
-+ for (queue = 0; queue < tx_cnt; queue++) {
-+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
-+
-+ tx_q->cur_tx = 0;
-+ tx_q->dirty_tx = 0;
-+ }
-+}
-+
-+/**
- * stmmac_resume - resume callback
- * @dev: device pointer
- * Description: when resume this function is invoked to setup the DMA and CORE
-@@ -3504,10 +4402,8 @@ int stmmac_resume(struct device *dev)
-
- spin_lock_irqsave(&priv->lock, flags);
-
-- priv->cur_rx = 0;
-- priv->dirty_rx = 0;
-- priv->dirty_tx = 0;
-- priv->cur_tx = 0;
-+ stmmac_reset_queues_param(priv);
-+
- /* reset private mss value to force mss context settings at
- * next tso xmit (only used for gmac4).
- */
-@@ -3519,9 +4415,9 @@ int stmmac_resume(struct device *dev)
- stmmac_init_tx_coalesce(priv);
- stmmac_set_rx_mode(ndev);
-
-- napi_enable(&priv->napi);
-+ stmmac_enable_all_queues(priv);
-
-- netif_start_queue(ndev);
-+ stmmac_start_all_queues(priv);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
-@@ -32,6 +32,7 @@
- */
- struct stmmac_pci_dmi_data {
- const char *name;
-+ const char *asset_tag;
- unsigned int func;
- int phy_addr;
- };
-@@ -46,6 +47,7 @@ struct stmmac_pci_info {
- static int stmmac_pci_find_phy_addr(struct stmmac_pci_info *info)
- {
- const char *name = dmi_get_system_info(DMI_BOARD_NAME);
-+ const char *asset_tag = dmi_get_system_info(DMI_BOARD_ASSET_TAG);
- unsigned int func = PCI_FUNC(info->pdev->devfn);
- struct stmmac_pci_dmi_data *dmi;
-
-@@ -57,18 +59,19 @@ static int stmmac_pci_find_phy_addr(stru
- return 1;
-
- for (dmi = info->dmi; dmi->name && *dmi->name; dmi++) {
-- if (!strcmp(dmi->name, name) && dmi->func == func)
-+ if (!strcmp(dmi->name, name) && dmi->func == func) {
-+ /* If asset tag is provided, match on it as well. */
-+ if (dmi->asset_tag && strcmp(dmi->asset_tag, asset_tag))
-+ continue;
- return dmi->phy_addr;
-+ }
- }
-
- return -ENODEV;
- }
-
--static void stmmac_default_data(struct plat_stmmacenet_data *plat)
-+static void common_default_data(struct plat_stmmacenet_data *plat)
- {
-- plat->bus_id = 1;
-- plat->phy_addr = 0;
-- plat->interface = PHY_INTERFACE_MODE_GMII;
- plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
- plat->has_gmac = 1;
- plat->force_sf_dma_mode = 1;
-@@ -76,10 +79,6 @@ static void stmmac_default_data(struct p
- plat->mdio_bus_data->phy_reset = NULL;
- plat->mdio_bus_data->phy_mask = 0;
-
-- plat->dma_cfg->pbl = 32;
-- plat->dma_cfg->pblx8 = true;
-- /* TODO: AXI */
--
- /* Set default value for multicast hash bins */
- plat->multicast_filter_bins = HASH_TABLE_SIZE;
-
-@@ -88,6 +87,31 @@ static void stmmac_default_data(struct p
-
- /* Set the maxmtu to a default of JUMBO_LEN */
- plat->maxmtu = JUMBO_LEN;
-+
-+ /* Set default number of RX and TX queues to use */
-+ plat->tx_queues_to_use = 1;
-+ plat->rx_queues_to_use = 1;
-+
-+ /* Disable Priority config by default */
-+ plat->tx_queues_cfg[0].use_prio = false;
-+ plat->rx_queues_cfg[0].use_prio = false;
-+
-+ /* Disable RX queues routing by default */
-+ plat->rx_queues_cfg[0].pkt_route = 0x0;
-+}
-+
-+static void stmmac_default_data(struct plat_stmmacenet_data *plat)
-+{
-+ /* Set common default data first */
-+ common_default_data(plat);
-+
-+ plat->bus_id = 1;
-+ plat->phy_addr = 0;
-+ plat->interface = PHY_INTERFACE_MODE_GMII;
-+
-+ plat->dma_cfg->pbl = 32;
-+ plat->dma_cfg->pblx8 = true;
-+ /* TODO: AXI */
- }
-
- static int quark_default_data(struct plat_stmmacenet_data *plat,
-@@ -96,6 +120,9 @@ static int quark_default_data(struct pla
- struct pci_dev *pdev = info->pdev;
- int ret;
-
-+ /* Set common default data first */
-+ common_default_data(plat);
-+
- /*
- * Refuse to load the driver and register net device if MAC controller
- * does not connect to any PHY interface.
-@@ -107,27 +134,12 @@ static int quark_default_data(struct pla
- plat->bus_id = PCI_DEVID(pdev->bus->number, pdev->devfn);
- plat->phy_addr = ret;
- plat->interface = PHY_INTERFACE_MODE_RMII;
-- plat->clk_csr = 2;
-- plat->has_gmac = 1;
-- plat->force_sf_dma_mode = 1;
--
-- plat->mdio_bus_data->phy_reset = NULL;
-- plat->mdio_bus_data->phy_mask = 0;
-
- plat->dma_cfg->pbl = 16;
- plat->dma_cfg->pblx8 = true;
- plat->dma_cfg->fixed_burst = 1;
- /* AXI (TODO) */
-
-- /* Set default value for multicast hash bins */
-- plat->multicast_filter_bins = HASH_TABLE_SIZE;
--
-- /* Set default value for unicast filter entries */
-- plat->unicast_filter_entries = 1;
--
-- /* Set the maxmtu to a default of JUMBO_LEN */
-- plat->maxmtu = JUMBO_LEN;
--
- return 0;
- }
-
-@@ -142,6 +154,24 @@ static struct stmmac_pci_dmi_data quark_
- .func = 6,
- .phy_addr = 1,
- },
-+ {
-+ .name = "SIMATIC IOT2000",
-+ .asset_tag = "6ES7647-0AA00-0YA2",
-+ .func = 6,
-+ .phy_addr = 1,
-+ },
-+ {
-+ .name = "SIMATIC IOT2000",
-+ .asset_tag = "6ES7647-0AA00-1YA2",
-+ .func = 6,
-+ .phy_addr = 1,
-+ },
-+ {
-+ .name = "SIMATIC IOT2000",
-+ .asset_tag = "6ES7647-0AA00-1YA2",
-+ .func = 7,
-+ .phy_addr = 1,
-+ },
- {}
- };
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-@@ -108,7 +108,7 @@ static struct stmmac_axi *stmmac_axi_set
- if (!np)
- return NULL;
-
-- axi = kzalloc(sizeof(*axi), GFP_KERNEL);
-+ axi = devm_kzalloc(&pdev->dev, sizeof(*axi), GFP_KERNEL);
- if (!axi) {
- of_node_put(np);
- return ERR_PTR(-ENOMEM);
-@@ -132,6 +132,155 @@ static struct stmmac_axi *stmmac_axi_set
- }
-
- /**
-+ * stmmac_mtl_setup - parse DT parameters for multiple queues configuration
-+ * @pdev: platform device
-+ */
-+static void stmmac_mtl_setup(struct platform_device *pdev,
-+ struct plat_stmmacenet_data *plat)
-+{
-+ struct device_node *q_node;
-+ struct device_node *rx_node;
-+ struct device_node *tx_node;
-+ u8 queue = 0;
-+
-+ /* For backwards-compatibility with device trees that don't have any
-+ * snps,mtl-rx-config or snps,mtl-tx-config properties, we fall back
-+ * to one RX and TX queues each.
-+ */
-+ plat->rx_queues_to_use = 1;
-+ plat->tx_queues_to_use = 1;
-+
-+ rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0);
-+ if (!rx_node)
-+ return;
-+
-+ tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0);
-+ if (!tx_node) {
-+ of_node_put(rx_node);
-+ return;
-+ }
-+
-+ /* Processing RX queues common config */
-+ if (of_property_read_u8(rx_node, "snps,rx-queues-to-use",
-+ &plat->rx_queues_to_use))
-+ plat->rx_queues_to_use = 1;
-+
-+ if (of_property_read_bool(rx_node, "snps,rx-sched-sp"))
-+ plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
-+ else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp"))
-+ plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP;
-+ else
-+ plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
-+
-+ /* Processing individual RX queue config */
-+ for_each_child_of_node(rx_node, q_node) {
-+ if (queue >= plat->rx_queues_to_use)
-+ break;
-+
-+ if (of_property_read_bool(q_node, "snps,dcb-algorithm"))
-+ plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
-+ else if (of_property_read_bool(q_node, "snps,avb-algorithm"))
-+ plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
-+ else
-+ plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
-+
-+ if (of_property_read_u8(q_node, "snps,map-to-dma-channel",
-+ &plat->rx_queues_cfg[queue].chan))
-+ plat->rx_queues_cfg[queue].chan = queue;
-+ /* TODO: Dynamic mapping to be included in the future */
-+
-+ if (of_property_read_u32(q_node, "snps,priority",
-+ &plat->rx_queues_cfg[queue].prio)) {
-+ plat->rx_queues_cfg[queue].prio = 0;
-+ plat->rx_queues_cfg[queue].use_prio = false;
-+ } else {
-+ plat->rx_queues_cfg[queue].use_prio = true;
-+ }
-+
-+ /* RX queue specific packet type routing */
-+ if (of_property_read_bool(q_node, "snps,route-avcp"))
-+ plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ;
-+ else if (of_property_read_bool(q_node, "snps,route-ptp"))
-+ plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ;
-+ else if (of_property_read_bool(q_node, "snps,route-dcbcp"))
-+ plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ;
-+ else if (of_property_read_bool(q_node, "snps,route-up"))
-+ plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ;
-+ else if (of_property_read_bool(q_node, "snps,route-multi-broad"))
-+ plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ;
-+ else
-+ plat->rx_queues_cfg[queue].pkt_route = 0x0;
-+
-+ queue++;
-+ }
-+
-+ /* Processing TX queues common config */
-+ if (of_property_read_u8(tx_node, "snps,tx-queues-to-use",
-+ &plat->tx_queues_to_use))
-+ plat->tx_queues_to_use = 1;
-+
-+ if (of_property_read_bool(tx_node, "snps,tx-sched-wrr"))
-+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
-+ else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq"))
-+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ;
-+ else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr"))
-+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR;
-+ else if (of_property_read_bool(tx_node, "snps,tx-sched-sp"))
-+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP;
-+ else
-+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP;
-+
-+ queue = 0;
-+
-+ /* Processing individual TX queue config */
-+ for_each_child_of_node(tx_node, q_node) {
-+ if (queue >= plat->tx_queues_to_use)
-+ break;
-+
-+ if (of_property_read_u8(q_node, "snps,weight",
-+ &plat->tx_queues_cfg[queue].weight))
-+ plat->tx_queues_cfg[queue].weight = 0x10 + queue;
-+
-+ if (of_property_read_bool(q_node, "snps,dcb-algorithm")) {
-+ plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
-+ } else if (of_property_read_bool(q_node,
-+ "snps,avb-algorithm")) {
-+ plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
-+
-+ /* Credit Base Shaper parameters used by AVB */
-+ if (of_property_read_u32(q_node, "snps,send_slope",
-+ &plat->tx_queues_cfg[queue].send_slope))
-+ plat->tx_queues_cfg[queue].send_slope = 0x0;
-+ if (of_property_read_u32(q_node, "snps,idle_slope",
-+ &plat->tx_queues_cfg[queue].idle_slope))
-+ plat->tx_queues_cfg[queue].idle_slope = 0x0;
-+ if (of_property_read_u32(q_node, "snps,high_credit",
-+ &plat->tx_queues_cfg[queue].high_credit))
-+ plat->tx_queues_cfg[queue].high_credit = 0x0;
-+ if (of_property_read_u32(q_node, "snps,low_credit",
-+ &plat->tx_queues_cfg[queue].low_credit))
-+ plat->tx_queues_cfg[queue].low_credit = 0x0;
-+ } else {
-+ plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
-+ }
-+
-+ if (of_property_read_u32(q_node, "snps,priority",
-+ &plat->tx_queues_cfg[queue].prio)) {
-+ plat->tx_queues_cfg[queue].prio = 0;
-+ plat->tx_queues_cfg[queue].use_prio = false;
-+ } else {
-+ plat->tx_queues_cfg[queue].use_prio = true;
-+ }
-+
-+ queue++;
-+ }
-+
-+ of_node_put(rx_node);
-+ of_node_put(tx_node);
-+ of_node_put(q_node);
-+}
-+
-+/**
- * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources
- * @plat: driver data platform structure
- * @np: device tree node
-@@ -340,6 +489,8 @@ stmmac_probe_config_dt(struct platform_d
-
- plat->axi = stmmac_axi_setup(pdev);
-
-+ stmmac_mtl_setup(pdev, plat);
-+
- /* clock setup */
- plat->stmmac_clk = devm_clk_get(&pdev->dev,
- STMMAC_RESOURCE_NAME);
-@@ -359,13 +510,12 @@ stmmac_probe_config_dt(struct platform_d
- clk_prepare_enable(plat->pclk);
-
- /* Fall-back to main clock in case of no PTP ref is passed */
-- plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "clk_ptp_ref");
-+ plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref");
- if (IS_ERR(plat->clk_ptp_ref)) {
- plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk);
- plat->clk_ptp_ref = NULL;
- dev_warn(&pdev->dev, "PTP uses main clock\n");
- } else {
-- clk_prepare_enable(plat->clk_ptp_ref);
- plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref);
- dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate);
- }
---- a/include/linux/stmmac.h
-+++ b/include/linux/stmmac.h
-@@ -28,6 +28,9 @@
-
- #include <linux/platform_device.h>
-
-+#define MTL_MAX_RX_QUEUES 8
-+#define MTL_MAX_TX_QUEUES 8
-+
- #define STMMAC_RX_COE_NONE 0
- #define STMMAC_RX_COE_TYPE1 1
- #define STMMAC_RX_COE_TYPE2 2
-@@ -44,6 +47,18 @@
- #define STMMAC_CSR_150_250M 0x4 /* MDC = clk_scr_i/102 */
- #define STMMAC_CSR_250_300M 0x5 /* MDC = clk_scr_i/122 */
-
-+/* MTL algorithms identifiers */
-+#define MTL_TX_ALGORITHM_WRR 0x0
-+#define MTL_TX_ALGORITHM_WFQ 0x1
-+#define MTL_TX_ALGORITHM_DWRR 0x2
-+#define MTL_TX_ALGORITHM_SP 0x3
-+#define MTL_RX_ALGORITHM_SP 0x4
-+#define MTL_RX_ALGORITHM_WSP 0x5
-+
-+/* RX/TX Queue Mode */
-+#define MTL_QUEUE_AVB 0x0
-+#define MTL_QUEUE_DCB 0x1
-+
- /* The MDC clock could be set higher than the IEEE 802.3
- * specified frequency limit 0f 2.5 MHz, by programming a clock divider
- * of value different than the above defined values. The resultant MDIO
-@@ -109,6 +124,26 @@ struct stmmac_axi {
- bool axi_rb;
- };
-
-+struct stmmac_rxq_cfg {
-+ u8 mode_to_use;
-+ u8 chan;
-+ u8 pkt_route;
-+ bool use_prio;
-+ u32 prio;
-+};
-+
-+struct stmmac_txq_cfg {
-+ u8 weight;
-+ u8 mode_to_use;
-+ /* Credit Base Shaper parameters */
-+ u32 send_slope;
-+ u32 idle_slope;
-+ u32 high_credit;
-+ u32 low_credit;
-+ bool use_prio;
-+ u32 prio;
-+};
-+
- struct plat_stmmacenet_data {
- int bus_id;
- int phy_addr;
-@@ -133,6 +168,12 @@ struct plat_stmmacenet_data {
- int unicast_filter_entries;
- int tx_fifo_size;
- int rx_fifo_size;
-+ u8 rx_queues_to_use;
-+ u8 tx_queues_to_use;
-+ u8 rx_sched_algorithm;
-+ u8 tx_sched_algorithm;
-+ struct stmmac_rxq_cfg rx_queues_cfg[MTL_MAX_RX_QUEUES];
-+ struct stmmac_txq_cfg tx_queues_cfg[MTL_MAX_TX_QUEUES];
- void (*fix_mac_speed)(void *priv, unsigned int speed);
- int (*init)(struct platform_device *pdev, void *priv);
- void (*exit)(struct platform_device *pdev, void *priv);
diff --git a/target/linux/sunxi/patches-4.9/0053-stmmac-form-4-13.patch b/target/linux/sunxi/patches-4.9/0053-stmmac-form-4-13.patch
deleted file mode 100644
index abdc618e6b..0000000000
--- a/target/linux/sunxi/patches-4.9/0053-stmmac-form-4-13.patch
+++ /dev/null
@@ -1,1923 +0,0 @@
---- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
-+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
-@@ -145,6 +145,17 @@ config DWMAC_SUNXI
- This selects Allwinner SoC glue layer support for the
- stmmac device driver. This driver is used for A20/A31
- GMAC ethernet controller.
-+
-+config DWMAC_SUN8I
-+ tristate "Allwinner sun8i GMAC support"
-+ default ARCH_SUNXI
-+ depends on OF && (ARCH_SUNXI || COMPILE_TEST)
-+ ---help---
-+ Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
-+
-+ This selects Allwinner SoC glue layer support for the
-+ stmmac device driver. This driver is used for H3/A83T/A64
-+ EMAC ethernet controller.
- endif
-
- config STMMAC_PCI
---- a/drivers/net/ethernet/stmicro/stmmac/Makefile
-+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-alt
- obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
- obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o
- obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
-+obj-$(CONFIG_DWMAC_SUN8I) += dwmac-sun8i.o
- obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o
- obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
- stmmac-platform-objs:= stmmac_platform.o
---- a/drivers/net/ethernet/stmicro/stmmac/common.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
-@@ -549,9 +549,11 @@ extern const struct stmmac_hwtimestamp s
- extern const struct stmmac_mode_ops dwmac4_ring_mode_ops;
-
- struct mac_link {
-- int port;
-- int duplex;
-- int speed;
-+ u32 speed_mask;
-+ u32 speed10;
-+ u32 speed100;
-+ u32 speed1000;
-+ u32 duplex;
- };
-
- struct mii_regs {
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
-@@ -270,7 +270,10 @@ static int socfpga_dwmac_set_phy_mode(st
- ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
- ctrl |= val << reg_shift;
-
-- if (dwmac->f2h_ptp_ref_clk) {
-+ if (dwmac->f2h_ptp_ref_clk ||
-+ phymode == PHY_INTERFACE_MODE_MII ||
-+ phymode == PHY_INTERFACE_MODE_GMII ||
-+ phymode == PHY_INTERFACE_MODE_SGMII) {
- ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
- regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
- &module);
---- /dev/null
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
-@@ -0,0 +1,1007 @@
-+/*
-+ * dwmac-sun8i.c - Allwinner sun8i DWMAC specific glue layer
-+ *
-+ * Copyright (C) 2017 Corentin Labbe <clabbe.montjoie@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/io.h>
-+#include <linux/iopoll.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_net.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/regmap.h>
-+#include <linux/stmmac.h>
-+
-+#include "stmmac.h"
-+#include "stmmac_platform.h"
-+
-+/* General notes on dwmac-sun8i:
-+ * Locking: no locking is necessary in this file because all necessary locking
-+ * is done in the "stmmac files"
-+ */
-+
-+/* struct emac_variant - Descrive dwmac-sun8i hardware variant
-+ * @default_syscon_value: The default value of the EMAC register in syscon
-+ * This value is used for disabling properly EMAC
-+ * and used as a good starting value in case of the
-+ * boot process(uboot) leave some stuff.
-+ * @internal_phy: Does the MAC embed an internal PHY
-+ * @support_mii: Does the MAC handle MII
-+ * @support_rmii: Does the MAC handle RMII
-+ * @support_rgmii: Does the MAC handle RGMII
-+ */
-+struct emac_variant {
-+ u32 default_syscon_value;
-+ int internal_phy;
-+ bool support_mii;
-+ bool support_rmii;
-+ bool support_rgmii;
-+};
-+
-+/* struct sunxi_priv_data - hold all sunxi private data
-+ * @tx_clk: reference to MAC TX clock
-+ * @ephy_clk: reference to the optional EPHY clock for the internal PHY
-+ * @regulator: reference to the optional regulator
-+ * @rst_ephy: reference to the optional EPHY reset for the internal PHY
-+ * @variant: reference to the current board variant
-+ * @regmap: regmap for using the syscon
-+ * @use_internal_phy: Does the current PHY choice imply using the internal PHY
-+ */
-+struct sunxi_priv_data {
-+ struct clk *tx_clk;
-+ struct clk *ephy_clk;
-+ struct regulator *regulator;
-+ struct reset_control *rst_ephy;
-+ const struct emac_variant *variant;
-+ struct regmap *regmap;
-+ bool use_internal_phy;
-+};
-+
-+static const struct emac_variant emac_variant_h3 = {
-+ .default_syscon_value = 0x58000,
-+ .internal_phy = PHY_INTERFACE_MODE_MII,
-+ .support_mii = true,
-+ .support_rmii = true,
-+ .support_rgmii = true
-+};
-+
-+static const struct emac_variant emac_variant_v3s = {
-+ .default_syscon_value = 0x38000,
-+ .internal_phy = PHY_INTERFACE_MODE_MII,
-+ .support_mii = true
-+};
-+
-+static const struct emac_variant emac_variant_a83t = {
-+ .default_syscon_value = 0,
-+ .internal_phy = 0,
-+ .support_mii = true,
-+ .support_rgmii = true
-+};
-+
-+static const struct emac_variant emac_variant_a64 = {
-+ .default_syscon_value = 0,
-+ .internal_phy = 0,
-+ .support_mii = true,
-+ .support_rmii = true,
-+ .support_rgmii = true
-+};
-+
-+#define EMAC_BASIC_CTL0 0x00
-+#define EMAC_BASIC_CTL1 0x04
-+#define EMAC_INT_STA 0x08
-+#define EMAC_INT_EN 0x0C
-+#define EMAC_TX_CTL0 0x10
-+#define EMAC_TX_CTL1 0x14
-+#define EMAC_TX_FLOW_CTL 0x1C
-+#define EMAC_TX_DESC_LIST 0x20
-+#define EMAC_RX_CTL0 0x24
-+#define EMAC_RX_CTL1 0x28
-+#define EMAC_RX_DESC_LIST 0x34
-+#define EMAC_RX_FRM_FLT 0x38
-+#define EMAC_MDIO_CMD 0x48
-+#define EMAC_MDIO_DATA 0x4C
-+#define EMAC_MACADDR_HI(reg) (0x50 + (reg) * 8)
-+#define EMAC_MACADDR_LO(reg) (0x54 + (reg) * 8)
-+#define EMAC_TX_DMA_STA 0xB0
-+#define EMAC_TX_CUR_DESC 0xB4
-+#define EMAC_TX_CUR_BUF 0xB8
-+#define EMAC_RX_DMA_STA 0xC0
-+#define EMAC_RX_CUR_DESC 0xC4
-+#define EMAC_RX_CUR_BUF 0xC8
-+
-+/* Use in EMAC_BASIC_CTL0 */
-+#define EMAC_DUPLEX_FULL BIT(0)
-+#define EMAC_LOOPBACK BIT(1)
-+#define EMAC_SPEED_1000 0
-+#define EMAC_SPEED_100 (0x03 << 2)
-+#define EMAC_SPEED_10 (0x02 << 2)
-+
-+/* Use in EMAC_BASIC_CTL1 */
-+#define EMAC_BURSTLEN_SHIFT 24
-+
-+/* Used in EMAC_RX_FRM_FLT */
-+#define EMAC_FRM_FLT_RXALL BIT(0)
-+#define EMAC_FRM_FLT_CTL BIT(13)
-+#define EMAC_FRM_FLT_MULTICAST BIT(16)
-+
-+/* Used in RX_CTL1*/
-+#define EMAC_RX_MD BIT(1)
-+#define EMAC_RX_TH_MASK GENMASK(4, 5)
-+#define EMAC_RX_TH_32 0
-+#define EMAC_RX_TH_64 (0x1 << 4)
-+#define EMAC_RX_TH_96 (0x2 << 4)
-+#define EMAC_RX_TH_128 (0x3 << 4)
-+#define EMAC_RX_DMA_EN BIT(30)
-+#define EMAC_RX_DMA_START BIT(31)
-+
-+/* Used in TX_CTL1*/
-+#define EMAC_TX_MD BIT(1)
-+#define EMAC_TX_NEXT_FRM BIT(2)
-+#define EMAC_TX_TH_MASK GENMASK(8, 10)
-+#define EMAC_TX_TH_64 0
-+#define EMAC_TX_TH_128 (0x1 << 8)
-+#define EMAC_TX_TH_192 (0x2 << 8)
-+#define EMAC_TX_TH_256 (0x3 << 8)
-+#define EMAC_TX_DMA_EN BIT(30)
-+#define EMAC_TX_DMA_START BIT(31)
-+
-+/* Used in RX_CTL0 */
-+#define EMAC_RX_RECEIVER_EN BIT(31)
-+#define EMAC_RX_DO_CRC BIT(27)
-+#define EMAC_RX_FLOW_CTL_EN BIT(16)
-+
-+/* Used in TX_CTL0 */
-+#define EMAC_TX_TRANSMITTER_EN BIT(31)
-+
-+/* Used in EMAC_TX_FLOW_CTL */
-+#define EMAC_TX_FLOW_CTL_EN BIT(0)
-+
-+/* Used in EMAC_INT_STA */
-+#define EMAC_TX_INT BIT(0)
-+#define EMAC_TX_DMA_STOP_INT BIT(1)
-+#define EMAC_TX_BUF_UA_INT BIT(2)
-+#define EMAC_TX_TIMEOUT_INT BIT(3)
-+#define EMAC_TX_UNDERFLOW_INT BIT(4)
-+#define EMAC_TX_EARLY_INT BIT(5)
-+#define EMAC_RX_INT BIT(8)
-+#define EMAC_RX_BUF_UA_INT BIT(9)
-+#define EMAC_RX_DMA_STOP_INT BIT(10)
-+#define EMAC_RX_TIMEOUT_INT BIT(11)
-+#define EMAC_RX_OVERFLOW_INT BIT(12)
-+#define EMAC_RX_EARLY_INT BIT(13)
-+#define EMAC_RGMII_STA_INT BIT(16)
-+
-+#define MAC_ADDR_TYPE_DST BIT(31)
-+
-+/* H3 specific bits for EPHY */
-+#define H3_EPHY_ADDR_SHIFT 20
-+#define H3_EPHY_CLK_SEL BIT(18) /* 1: 24MHz, 0: 25MHz */
-+#define H3_EPHY_LED_POL BIT(17) /* 1: active low, 0: active high */
-+#define H3_EPHY_SHUTDOWN BIT(16) /* 1: shutdown, 0: power up */
-+#define H3_EPHY_SELECT BIT(15) /* 1: internal PHY, 0: external PHY */
-+
-+/* H3/A64 specific bits */
-+#define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */
-+
-+/* Generic system control EMAC_CLK bits */
-+#define SYSCON_ETXDC_MASK GENMASK(2, 0)
-+#define SYSCON_ETXDC_SHIFT 10
-+#define SYSCON_ERXDC_MASK GENMASK(4, 0)
-+#define SYSCON_ERXDC_SHIFT 5
-+/* EMAC PHY Interface Type */
-+#define SYSCON_EPIT BIT(2) /* 1: RGMII, 0: MII */
-+#define SYSCON_ETCS_MASK GENMASK(1, 0)
-+#define SYSCON_ETCS_MII 0x0
-+#define SYSCON_ETCS_EXT_GMII 0x1
-+#define SYSCON_ETCS_INT_GMII 0x2
-+#define SYSCON_EMAC_REG 0x30
-+
-+/* sun8i_dwmac_dma_reset() - reset the EMAC
-+ * Called from stmmac via stmmac_dma_ops->reset
-+ */
-+static int sun8i_dwmac_dma_reset(void __iomem *ioaddr)
-+{
-+ writel(0, ioaddr + EMAC_RX_CTL1);
-+ writel(0, ioaddr + EMAC_TX_CTL1);
-+ writel(0, ioaddr + EMAC_RX_FRM_FLT);
-+ writel(0, ioaddr + EMAC_RX_DESC_LIST);
-+ writel(0, ioaddr + EMAC_TX_DESC_LIST);
-+ writel(0, ioaddr + EMAC_INT_EN);
-+ writel(0x1FFFFFF, ioaddr + EMAC_INT_STA);
-+ return 0;
-+}
-+
-+/* sun8i_dwmac_dma_init() - initialize the EMAC
-+ * Called from stmmac via stmmac_dma_ops->init
-+ */
-+static void sun8i_dwmac_dma_init(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_tx, u32 dma_rx, int atds)
-+{
-+ /* Write TX and RX descriptors address */
-+ writel(dma_rx, ioaddr + EMAC_RX_DESC_LIST);
-+ writel(dma_tx, ioaddr + EMAC_TX_DESC_LIST);
-+
-+ writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN);
-+ writel(0x1FFFFFF, ioaddr + EMAC_INT_STA);
-+}
-+
-+/* sun8i_dwmac_dump_regs() - Dump EMAC address space
-+ * Called from stmmac_dma_ops->dump_regs
-+ * Used for ethtool
-+ */
-+static void sun8i_dwmac_dump_regs(void __iomem *ioaddr, u32 *reg_space)
-+{
-+ int i;
-+
-+ for (i = 0; i < 0xC8; i += 4) {
-+ if (i == 0x32 || i == 0x3C)
-+ continue;
-+ reg_space[i / 4] = readl(ioaddr + i);
-+ }
-+}
-+
-+/* sun8i_dwmac_dump_mac_regs() - Dump EMAC address space
-+ * Called from stmmac_ops->dump_regs
-+ * Used for ethtool
-+ */
-+static void sun8i_dwmac_dump_mac_regs(struct mac_device_info *hw,
-+ u32 *reg_space)
-+{
-+ int i;
-+ void __iomem *ioaddr = hw->pcsr;
-+
-+ for (i = 0; i < 0xC8; i += 4) {
-+ if (i == 0x32 || i == 0x3C)
-+ continue;
-+ reg_space[i / 4] = readl(ioaddr + i);
-+ }
-+}
-+
-+static void sun8i_dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan)
-+{
-+ writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN);
-+}
-+
-+static void sun8i_dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan)
-+{
-+ writel(0, ioaddr + EMAC_INT_EN);
-+}
-+
-+static void sun8i_dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan)
-+{
-+ u32 v;
-+
-+ v = readl(ioaddr + EMAC_TX_CTL1);
-+ v |= EMAC_TX_DMA_START;
-+ v |= EMAC_TX_DMA_EN;
-+ writel(v, ioaddr + EMAC_TX_CTL1);
-+}
-+
-+static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr)
-+{
-+ u32 v;
-+
-+ v = readl(ioaddr + EMAC_TX_CTL1);
-+ v |= EMAC_TX_DMA_START;
-+ v |= EMAC_TX_DMA_EN;
-+ writel(v, ioaddr + EMAC_TX_CTL1);
-+}
-+
-+static void sun8i_dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan)
-+{
-+ u32 v;
-+
-+ v = readl(ioaddr + EMAC_TX_CTL1);
-+ v &= ~EMAC_TX_DMA_EN;
-+ writel(v, ioaddr + EMAC_TX_CTL1);
-+}
-+
-+static void sun8i_dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan)
-+{
-+ u32 v;
-+
-+ v = readl(ioaddr + EMAC_RX_CTL1);
-+ v |= EMAC_RX_DMA_START;
-+ v |= EMAC_RX_DMA_EN;
-+ writel(v, ioaddr + EMAC_RX_CTL1);
-+}
-+
-+static void sun8i_dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan)
-+{
-+ u32 v;
-+
-+ v = readl(ioaddr + EMAC_RX_CTL1);
-+ v &= ~EMAC_RX_DMA_EN;
-+ writel(v, ioaddr + EMAC_RX_CTL1);
-+}
-+
-+static int sun8i_dwmac_dma_interrupt(void __iomem *ioaddr,
-+ struct stmmac_extra_stats *x, u32 chan)
-+{
-+ u32 v;
-+ int ret = 0;
-+
-+ v = readl(ioaddr + EMAC_INT_STA);
-+
-+ if (v & EMAC_TX_INT) {
-+ ret |= handle_tx;
-+ x->tx_normal_irq_n++;
-+ }
-+
-+ if (v & EMAC_TX_DMA_STOP_INT)
-+ x->tx_process_stopped_irq++;
-+
-+ if (v & EMAC_TX_BUF_UA_INT)
-+ x->tx_process_stopped_irq++;
-+
-+ if (v & EMAC_TX_TIMEOUT_INT)
-+ ret |= tx_hard_error;
-+
-+ if (v & EMAC_TX_UNDERFLOW_INT) {
-+ ret |= tx_hard_error;
-+ x->tx_undeflow_irq++;
-+ }
-+
-+ if (v & EMAC_TX_EARLY_INT)
-+ x->tx_early_irq++;
-+
-+ if (v & EMAC_RX_INT) {
-+ ret |= handle_rx;
-+ x->rx_normal_irq_n++;
-+ }
-+
-+ if (v & EMAC_RX_BUF_UA_INT)
-+ x->rx_buf_unav_irq++;
-+
-+ if (v & EMAC_RX_DMA_STOP_INT)
-+ x->rx_process_stopped_irq++;
-+
-+ if (v & EMAC_RX_TIMEOUT_INT)
-+ ret |= tx_hard_error;
-+
-+ if (v & EMAC_RX_OVERFLOW_INT) {
-+ ret |= tx_hard_error;
-+ x->rx_overflow_irq++;
-+ }
-+
-+ if (v & EMAC_RX_EARLY_INT)
-+ x->rx_early_irq++;
-+
-+ if (v & EMAC_RGMII_STA_INT)
-+ x->irq_rgmii_n++;
-+
-+ writel(v, ioaddr + EMAC_INT_STA);
-+
-+ return ret;
-+}
-+
-+static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode,
-+ int rxmode, int rxfifosz)
-+{
-+ u32 v;
-+
-+ v = readl(ioaddr + EMAC_TX_CTL1);
-+ if (txmode == SF_DMA_MODE) {
-+ v |= EMAC_TX_MD;
-+ /* Undocumented bit (called TX_NEXT_FRM in BSP), the original
-+ * comment is
-+ * "Operating on second frame increase the performance
-+ * especially when transmit store-and-forward is used."
-+ */
-+ v |= EMAC_TX_NEXT_FRM;
-+ } else {
-+ v &= ~EMAC_TX_MD;
-+ v &= ~EMAC_TX_TH_MASK;
-+ if (txmode < 64)
-+ v |= EMAC_TX_TH_64;
-+ else if (txmode < 128)
-+ v |= EMAC_TX_TH_128;
-+ else if (txmode < 192)
-+ v |= EMAC_TX_TH_192;
-+ else if (txmode < 256)
-+ v |= EMAC_TX_TH_256;
-+ }
-+ writel(v, ioaddr + EMAC_TX_CTL1);
-+
-+ v = readl(ioaddr + EMAC_RX_CTL1);
-+ if (rxmode == SF_DMA_MODE) {
-+ v |= EMAC_RX_MD;
-+ } else {
-+ v &= ~EMAC_RX_MD;
-+ v &= ~EMAC_RX_TH_MASK;
-+ if (rxmode < 32)
-+ v |= EMAC_RX_TH_32;
-+ else if (rxmode < 64)
-+ v |= EMAC_RX_TH_64;
-+ else if (rxmode < 96)
-+ v |= EMAC_RX_TH_96;
-+ else if (rxmode < 128)
-+ v |= EMAC_RX_TH_128;
-+ }
-+ writel(v, ioaddr + EMAC_RX_CTL1);
-+}
-+
-+static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = {
-+ .reset = sun8i_dwmac_dma_reset,
-+ .init = sun8i_dwmac_dma_init,
-+ .dump_regs = sun8i_dwmac_dump_regs,
-+ .dma_mode = sun8i_dwmac_dma_operation_mode,
-+ .enable_dma_transmission = sun8i_dwmac_enable_dma_transmission,
-+ .enable_dma_irq = sun8i_dwmac_enable_dma_irq,
-+ .disable_dma_irq = sun8i_dwmac_disable_dma_irq,
-+ .start_tx = sun8i_dwmac_dma_start_tx,
-+ .stop_tx = sun8i_dwmac_dma_stop_tx,
-+ .start_rx = sun8i_dwmac_dma_start_rx,
-+ .stop_rx = sun8i_dwmac_dma_stop_rx,
-+ .dma_interrupt = sun8i_dwmac_dma_interrupt,
-+};
-+
-+static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
-+{
-+ struct sunxi_priv_data *gmac = priv;
-+ int ret;
-+
-+ if (gmac->regulator) {
-+ ret = regulator_enable(gmac->regulator);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Fail to enable regulator\n");
-+ return ret;
-+ }
-+ }
-+
-+ ret = clk_prepare_enable(gmac->tx_clk);
-+ if (ret) {
-+ if (gmac->regulator)
-+ regulator_disable(gmac->regulator);
-+ dev_err(&pdev->dev, "Could not enable AHB clock\n");
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static void sun8i_dwmac_core_init(struct mac_device_info *hw, int mtu)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 v;
-+
-+ v = (8 << EMAC_BURSTLEN_SHIFT); /* burst len */
-+ writel(v, ioaddr + EMAC_BASIC_CTL1);
-+}
-+
-+static void sun8i_dwmac_set_mac(void __iomem *ioaddr, bool enable)
-+{
-+ u32 t, r;
-+
-+ t = readl(ioaddr + EMAC_TX_CTL0);
-+ r = readl(ioaddr + EMAC_RX_CTL0);
-+ if (enable) {
-+ t |= EMAC_TX_TRANSMITTER_EN;
-+ r |= EMAC_RX_RECEIVER_EN;
-+ } else {
-+ t &= ~EMAC_TX_TRANSMITTER_EN;
-+ r &= ~EMAC_RX_RECEIVER_EN;
-+ }
-+ writel(t, ioaddr + EMAC_TX_CTL0);
-+ writel(r, ioaddr + EMAC_RX_CTL0);
-+}
-+
-+/* Set MAC address at slot reg_n
-+ * All slot > 0 need to be enabled with MAC_ADDR_TYPE_DST
-+ * If addr is NULL, clear the slot
-+ */
-+static void sun8i_dwmac_set_umac_addr(struct mac_device_info *hw,
-+ unsigned char *addr,
-+ unsigned int reg_n)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 v;
-+
-+ if (!addr) {
-+ writel(0, ioaddr + EMAC_MACADDR_HI(reg_n));
-+ return;
-+ }
-+
-+ stmmac_set_mac_addr(ioaddr, addr, EMAC_MACADDR_HI(reg_n),
-+ EMAC_MACADDR_LO(reg_n));
-+ if (reg_n > 0) {
-+ v = readl(ioaddr + EMAC_MACADDR_HI(reg_n));
-+ v |= MAC_ADDR_TYPE_DST;
-+ writel(v, ioaddr + EMAC_MACADDR_HI(reg_n));
-+ }
-+}
-+
-+static void sun8i_dwmac_get_umac_addr(struct mac_device_info *hw,
-+ unsigned char *addr,
-+ unsigned int reg_n)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+
-+ stmmac_get_mac_addr(ioaddr, addr, EMAC_MACADDR_HI(reg_n),
-+ EMAC_MACADDR_LO(reg_n));
-+}
-+
-+/* caution this function must return non 0 to work */
-+static int sun8i_dwmac_rx_ipc_enable(struct mac_device_info *hw)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 v;
-+
-+ v = readl(ioaddr + EMAC_RX_CTL0);
-+ v |= EMAC_RX_DO_CRC;
-+ writel(v, ioaddr + EMAC_RX_CTL0);
-+
-+ return 1;
-+}
-+
-+static void sun8i_dwmac_set_filter(struct mac_device_info *hw,
-+ struct net_device *dev)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 v;
-+ int i = 1;
-+ struct netdev_hw_addr *ha;
-+ int macaddrs = netdev_uc_count(dev) + netdev_mc_count(dev) + 1;
-+
-+ v = EMAC_FRM_FLT_CTL;
-+
-+ if (dev->flags & IFF_PROMISC) {
-+ v = EMAC_FRM_FLT_RXALL;
-+ } else if (dev->flags & IFF_ALLMULTI) {
-+ v |= EMAC_FRM_FLT_MULTICAST;
-+ } else if (macaddrs <= hw->unicast_filter_entries) {
-+ if (!netdev_mc_empty(dev)) {
-+ netdev_for_each_mc_addr(ha, dev) {
-+ sun8i_dwmac_set_umac_addr(hw, ha->addr, i);
-+ i++;
-+ }
-+ }
-+ if (!netdev_uc_empty(dev)) {
-+ netdev_for_each_uc_addr(ha, dev) {
-+ sun8i_dwmac_set_umac_addr(hw, ha->addr, i);
-+ i++;
-+ }
-+ }
-+ } else {
-+ netdev_info(dev, "Too many address, switching to promiscuous\n");
-+ v = EMAC_FRM_FLT_RXALL;
-+ }
-+
-+ /* Disable unused address filter slots */
-+ while (i < hw->unicast_filter_entries)
-+ sun8i_dwmac_set_umac_addr(hw, NULL, i++);
-+
-+ writel(v, ioaddr + EMAC_RX_FRM_FLT);
-+}
-+
-+static void sun8i_dwmac_flow_ctrl(struct mac_device_info *hw,
-+ unsigned int duplex, unsigned int fc,
-+ unsigned int pause_time, u32 tx_cnt)
-+{
-+ void __iomem *ioaddr = hw->pcsr;
-+ u32 v;
-+
-+ v = readl(ioaddr + EMAC_RX_CTL0);
-+ if (fc == FLOW_AUTO)
-+ v |= EMAC_RX_FLOW_CTL_EN;
-+ else
-+ v &= ~EMAC_RX_FLOW_CTL_EN;
-+ writel(v, ioaddr + EMAC_RX_CTL0);
-+
-+ v = readl(ioaddr + EMAC_TX_FLOW_CTL);
-+ if (fc == FLOW_AUTO)
-+ v |= EMAC_TX_FLOW_CTL_EN;
-+ else
-+ v &= ~EMAC_TX_FLOW_CTL_EN;
-+ writel(v, ioaddr + EMAC_TX_FLOW_CTL);
-+}
-+
-+static int sun8i_dwmac_reset(struct stmmac_priv *priv)
-+{
-+ u32 v;
-+ int err;
-+
-+ v = readl(priv->ioaddr + EMAC_BASIC_CTL1);
-+ writel(v | 0x01, priv->ioaddr + EMAC_BASIC_CTL1);
-+
-+ /* The timeout was previoulsy set to 10ms, but some board (OrangePI0)
-+ * need more if no cable plugged. 100ms seems OK
-+ */
-+ err = readl_poll_timeout(priv->ioaddr + EMAC_BASIC_CTL1, v,
-+ !(v & 0x01), 100, 100000);
-+
-+ if (err) {
-+ dev_err(priv->device, "EMAC reset timeout\n");
-+ return -EFAULT;
-+ }
-+ return 0;
-+}
-+
-+static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
-+{
-+ struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
-+ struct device_node *node = priv->device->of_node;
-+ int ret;
-+ u32 reg, val;
-+
-+ regmap_read(gmac->regmap, SYSCON_EMAC_REG, &val);
-+ reg = gmac->variant->default_syscon_value;
-+ if (reg != val)
-+ dev_warn(priv->device,
-+ "Current syscon value is not the default %x (expect %x)\n",
-+ val, reg);
-+
-+ if (gmac->variant->internal_phy) {
-+ if (!gmac->use_internal_phy) {
-+ /* switch to external PHY interface */
-+ reg &= ~H3_EPHY_SELECT;
-+ } else {
-+ reg |= H3_EPHY_SELECT;
-+ reg &= ~H3_EPHY_SHUTDOWN;
-+ dev_dbg(priv->device, "Select internal_phy %x\n", reg);
-+
-+ if (of_property_read_bool(priv->plat->phy_node,
-+ "allwinner,leds-active-low"))
-+ reg |= H3_EPHY_LED_POL;
-+ else
-+ reg &= ~H3_EPHY_LED_POL;
-+
-+ /* Force EPHY xtal frequency to 24MHz. */
-+ reg |= H3_EPHY_CLK_SEL;
-+
-+ ret = of_mdio_parse_addr(priv->device,
-+ priv->plat->phy_node);
-+ if (ret < 0) {
-+ dev_err(priv->device, "Could not parse MDIO addr\n");
-+ return ret;
-+ }
-+ /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY
-+ * address. No need to mask it again.
-+ */
-+ reg |= ret << H3_EPHY_ADDR_SHIFT;
-+ }
-+ }
-+
-+ if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) {
-+ if (val % 100) {
-+ dev_err(priv->device, "tx-delay must be a multiple of 100\n");
-+ return -EINVAL;
-+ }
-+ val /= 100;
-+ dev_dbg(priv->device, "set tx-delay to %x\n", val);
-+ if (val <= SYSCON_ETXDC_MASK) {
-+ reg &= ~(SYSCON_ETXDC_MASK << SYSCON_ETXDC_SHIFT);
-+ reg |= (val << SYSCON_ETXDC_SHIFT);
-+ } else {
-+ dev_err(priv->device, "Invalid TX clock delay: %d\n",
-+ val);
-+ return -EINVAL;
-+ }
-+ }
-+
-+ if (!of_property_read_u32(node, "allwinner,rx-delay-ps", &val)) {
-+ if (val % 100) {
-+ dev_err(priv->device, "rx-delay must be a multiple of 100\n");
-+ return -EINVAL;
-+ }
-+ val /= 100;
-+ dev_dbg(priv->device, "set rx-delay to %x\n", val);
-+ if (val <= SYSCON_ERXDC_MASK) {
-+ reg &= ~(SYSCON_ERXDC_MASK << SYSCON_ERXDC_SHIFT);
-+ reg |= (val << SYSCON_ERXDC_SHIFT);
-+ } else {
-+ dev_err(priv->device, "Invalid RX clock delay: %d\n",
-+ val);
-+ return -EINVAL;
-+ }
-+ }
-+
-+ /* Clear interface mode bits */
-+ reg &= ~(SYSCON_ETCS_MASK | SYSCON_EPIT);
-+ if (gmac->variant->support_rmii)
-+ reg &= ~SYSCON_RMII_EN;
-+
-+ switch (priv->plat->interface) {
-+ case PHY_INTERFACE_MODE_MII:
-+ /* default */
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ reg |= SYSCON_EPIT | SYSCON_ETCS_INT_GMII;
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ reg |= SYSCON_RMII_EN | SYSCON_ETCS_EXT_GMII;
-+ break;
-+ default:
-+ dev_err(priv->device, "Unsupported interface mode: %s",
-+ phy_modes(priv->plat->interface));
-+ return -EINVAL;
-+ }
-+
-+ regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
-+
-+ return 0;
-+}
-+
-+static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac)
-+{
-+ u32 reg = gmac->variant->default_syscon_value;
-+
-+ regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
-+}
-+
-+static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv)
-+{
-+ struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
-+ int ret;
-+
-+ if (!gmac->use_internal_phy)
-+ return 0;
-+
-+ ret = clk_prepare_enable(gmac->ephy_clk);
-+ if (ret) {
-+ dev_err(priv->device, "Cannot enable ephy\n");
-+ return ret;
-+ }
-+
-+ /* Make sure the EPHY is properly reseted, as U-Boot may leave
-+ * it at deasserted state, and thus it may fail to reset EMAC.
-+ */
-+ reset_control_assert(gmac->rst_ephy);
-+
-+ ret = reset_control_deassert(gmac->rst_ephy);
-+ if (ret) {
-+ dev_err(priv->device, "Cannot deassert ephy\n");
-+ clk_disable_unprepare(gmac->ephy_clk);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
-+{
-+ if (!gmac->use_internal_phy)
-+ return 0;
-+
-+ clk_disable_unprepare(gmac->ephy_clk);
-+ reset_control_assert(gmac->rst_ephy);
-+ return 0;
-+}
-+
-+/* sun8i_power_phy() - Activate the PHY:
-+ * In case of error, no need to call sun8i_unpower_phy(),
-+ * it will be called anyway by sun8i_dwmac_exit()
-+ */
-+static int sun8i_power_phy(struct stmmac_priv *priv)
-+{
-+ int ret;
-+
-+ ret = sun8i_dwmac_power_internal_phy(priv);
-+ if (ret)
-+ return ret;
-+
-+ ret = sun8i_dwmac_set_syscon(priv);
-+ if (ret)
-+ return ret;
-+
-+ /* After changing syscon value, the MAC need reset or it will use
-+ * the last value (and so the last PHY set.
-+ */
-+ ret = sun8i_dwmac_reset(priv);
-+ if (ret)
-+ return ret;
-+ return 0;
-+}
-+
-+static void sun8i_unpower_phy(struct sunxi_priv_data *gmac)
-+{
-+ sun8i_dwmac_unset_syscon(gmac);
-+ sun8i_dwmac_unpower_internal_phy(gmac);
-+}
-+
-+static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
-+{
-+ struct sunxi_priv_data *gmac = priv;
-+
-+ sun8i_unpower_phy(gmac);
-+
-+ clk_disable_unprepare(gmac->tx_clk);
-+
-+ if (gmac->regulator)
-+ regulator_disable(gmac->regulator);
-+}
-+
-+static const struct stmmac_ops sun8i_dwmac_ops = {
-+ .core_init = sun8i_dwmac_core_init,
-+ .set_mac = sun8i_dwmac_set_mac,
-+ .dump_regs = sun8i_dwmac_dump_mac_regs,
-+ .rx_ipc = sun8i_dwmac_rx_ipc_enable,
-+ .set_filter = sun8i_dwmac_set_filter,
-+ .flow_ctrl = sun8i_dwmac_flow_ctrl,
-+ .set_umac_addr = sun8i_dwmac_set_umac_addr,
-+ .get_umac_addr = sun8i_dwmac_get_umac_addr,
-+};
-+
-+static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
-+{
-+ struct mac_device_info *mac;
-+ struct stmmac_priv *priv = ppriv;
-+ int ret;
-+
-+ mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL);
-+ if (!mac)
-+ return NULL;
-+
-+ ret = sun8i_power_phy(priv);
-+ if (ret)
-+ return NULL;
-+
-+ mac->pcsr = priv->ioaddr;
-+ mac->mac = &sun8i_dwmac_ops;
-+ mac->dma = &sun8i_dwmac_dma_ops;
-+
-+ /* The loopback bit seems to be re-set when link change
-+ * Simply mask it each time
-+ * Speed 10/100/1000 are set in BIT(2)/BIT(3)
-+ */
-+ mac->link.speed_mask = GENMASK(3, 2) | EMAC_LOOPBACK;
-+ mac->link.speed10 = EMAC_SPEED_10;
-+ mac->link.speed100 = EMAC_SPEED_100;
-+ mac->link.speed1000 = EMAC_SPEED_1000;
-+ mac->link.duplex = EMAC_DUPLEX_FULL;
-+ mac->mii.addr = EMAC_MDIO_CMD;
-+ mac->mii.data = EMAC_MDIO_DATA;
-+ mac->mii.reg_shift = 4;
-+ mac->mii.reg_mask = GENMASK(8, 4);
-+ mac->mii.addr_shift = 12;
-+ mac->mii.addr_mask = GENMASK(16, 12);
-+ mac->mii.clk_csr_shift = 20;
-+ mac->mii.clk_csr_mask = GENMASK(22, 20);
-+ mac->unicast_filter_entries = 8;
-+
-+ /* Synopsys Id is not available */
-+ priv->synopsys_id = 0;
-+
-+ return mac;
-+}
-+
-+static int sun8i_dwmac_probe(struct platform_device *pdev)
-+{
-+ struct plat_stmmacenet_data *plat_dat;
-+ struct stmmac_resources stmmac_res;
-+ struct sunxi_priv_data *gmac;
-+ struct device *dev = &pdev->dev;
-+ int ret;
-+
-+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
-+ if (ret)
-+ return ret;
-+
-+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-+ if (IS_ERR(plat_dat))
-+ return PTR_ERR(plat_dat);
-+
-+ gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
-+ if (!gmac)
-+ return -ENOMEM;
-+
-+ gmac->variant = of_device_get_match_data(&pdev->dev);
-+ if (!gmac->variant) {
-+ dev_err(&pdev->dev, "Missing dwmac-sun8i variant\n");
-+ return -EINVAL;
-+ }
-+
-+ gmac->tx_clk = devm_clk_get(dev, "stmmaceth");
-+ if (IS_ERR(gmac->tx_clk)) {
-+ dev_err(dev, "Could not get TX clock\n");
-+ return PTR_ERR(gmac->tx_clk);
-+ }
-+
-+ /* Optional regulator for PHY */
-+ gmac->regulator = devm_regulator_get_optional(dev, "phy");
-+ if (IS_ERR(gmac->regulator)) {
-+ if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
-+ return -EPROBE_DEFER;
-+ dev_info(dev, "No regulator found\n");
-+ gmac->regulator = NULL;
-+ }
-+
-+ gmac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+ "syscon");
-+ if (IS_ERR(gmac->regmap)) {
-+ ret = PTR_ERR(gmac->regmap);
-+ dev_err(&pdev->dev, "Unable to map syscon: %d\n", ret);
-+ return ret;
-+ }
-+
-+ plat_dat->interface = of_get_phy_mode(dev->of_node);
-+ if (plat_dat->interface == gmac->variant->internal_phy) {
-+ dev_info(&pdev->dev, "Will use internal PHY\n");
-+ gmac->use_internal_phy = true;
-+ gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0);
-+ if (IS_ERR(gmac->ephy_clk)) {
-+ ret = PTR_ERR(gmac->ephy_clk);
-+ dev_err(&pdev->dev, "Cannot get EPHY clock: %d\n", ret);
-+ return -EINVAL;
-+ }
-+
-+ gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
-+ if (IS_ERR(gmac->rst_ephy)) {
-+ ret = PTR_ERR(gmac->rst_ephy);
-+ if (ret == -EPROBE_DEFER)
-+ return ret;
-+ dev_err(&pdev->dev, "No EPHY reset control found %d\n",
-+ ret);
-+ return -EINVAL;
-+ }
-+ } else {
-+ dev_info(&pdev->dev, "Will use external PHY\n");
-+ gmac->use_internal_phy = false;
-+ }
-+
-+ /* platform data specifying hardware features and callbacks.
-+ * hardware features were copied from Allwinner drivers.
-+ */
-+ plat_dat->rx_coe = STMMAC_RX_COE_TYPE2;
-+ plat_dat->tx_coe = 1;
-+ plat_dat->has_sun8i = true;
-+ plat_dat->bsp_priv = gmac;
-+ plat_dat->init = sun8i_dwmac_init;
-+ plat_dat->exit = sun8i_dwmac_exit;
-+ plat_dat->setup = sun8i_dwmac_setup;
-+
-+ ret = sun8i_dwmac_init(pdev, plat_dat->bsp_priv);
-+ if (ret)
-+ return ret;
-+
-+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
-+ if (ret)
-+ sun8i_dwmac_exit(pdev, plat_dat->bsp_priv);
-+
-+ return ret;
-+}
-+
-+static const struct of_device_id sun8i_dwmac_match[] = {
-+ { .compatible = "allwinner,sun8i-h3-emac",
-+ .data = &emac_variant_h3 },
-+ { .compatible = "allwinner,sun8i-v3s-emac",
-+ .data = &emac_variant_v3s },
-+ { .compatible = "allwinner,sun8i-a83t-emac",
-+ .data = &emac_variant_a83t },
-+ { .compatible = "allwinner,sun50i-a64-emac",
-+ .data = &emac_variant_a64 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, sun8i_dwmac_match);
-+
-+static struct platform_driver sun8i_dwmac_driver = {
-+ .probe = sun8i_dwmac_probe,
-+ .remove = stmmac_pltfr_remove,
-+ .driver = {
-+ .name = "dwmac-sun8i",
-+ .pm = &stmmac_pltfr_pm_ops,
-+ .of_match_table = sun8i_dwmac_match,
-+ },
-+};
-+module_platform_driver(sun8i_dwmac_driver);
-+
-+MODULE_AUTHOR("Corentin Labbe <clabbe.montjoie@gmail.com>");
-+MODULE_DESCRIPTION("Allwinner sun8i DWMAC specific glue layer");
-+MODULE_LICENSE("GPL");
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
-@@ -45,15 +45,17 @@ static void dwmac1000_core_init(struct m
- if (hw->ps) {
- value |= GMAC_CONTROL_TE;
-
-- if (hw->ps == SPEED_1000) {
-- value &= ~GMAC_CONTROL_PS;
-- } else {
-- value |= GMAC_CONTROL_PS;
--
-- if (hw->ps == SPEED_10)
-- value &= ~GMAC_CONTROL_FES;
-- else
-- value |= GMAC_CONTROL_FES;
-+ value &= ~hw->link.speed_mask;
-+ switch (hw->ps) {
-+ case SPEED_1000:
-+ value |= hw->link.speed1000;
-+ break;
-+ case SPEED_100:
-+ value |= hw->link.speed100;
-+ break;
-+ case SPEED_10:
-+ value |= hw->link.speed10;
-+ break;
- }
- }
-
-@@ -531,9 +533,11 @@ struct mac_device_info *dwmac1000_setup(
- mac->mac = &dwmac1000_ops;
- mac->dma = &dwmac1000_dma_ops;
-
-- mac->link.port = GMAC_CONTROL_PS;
- mac->link.duplex = GMAC_CONTROL_DM;
-- mac->link.speed = GMAC_CONTROL_FES;
-+ mac->link.speed10 = GMAC_CONTROL_PS;
-+ mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
-+ mac->link.speed1000 = 0;
-+ mac->link.speed_mask = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
- mac->mii.addr = GMAC_MII_ADDR;
- mac->mii.data = GMAC_MII_DATA;
- mac->mii.addr_shift = 11;
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
-@@ -205,8 +205,8 @@ static void dwmac1000_dump_dma_regs(void
- {
- int i;
-
-- for (i = 0; i < 22; i++)
-- if ((i < 9) || (i > 17))
-+ for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++)
-+ if ((i < 12) || (i > 17))
- reg_space[DMA_BUS_MODE / 4 + i] =
- readl(ioaddr + DMA_BUS_MODE + i * 4);
- }
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
-@@ -175,9 +175,11 @@ struct mac_device_info *dwmac100_setup(v
- mac->mac = &dwmac100_ops;
- mac->dma = &dwmac100_dma_ops;
-
-- mac->link.port = MAC_CONTROL_PS;
- mac->link.duplex = MAC_CONTROL_F;
-- mac->link.speed = 0;
-+ mac->link.speed10 = 0;
-+ mac->link.speed100 = 0;
-+ mac->link.speed1000 = 0;
-+ mac->link.speed_mask = MAC_CONTROL_PS;
- mac->mii.addr = MAC_MII_ADDR;
- mac->mii.data = MAC_MII_DATA;
- mac->mii.addr_shift = 11;
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
-@@ -70,7 +70,7 @@ static void dwmac100_dump_dma_regs(void
- {
- int i;
-
-- for (i = 0; i < 9; i++)
-+ for (i = 0; i < NUM_DWMAC100_DMA_REGS; i++)
- reg_space[DMA_BUS_MODE / 4 + i] =
- readl(ioaddr + DMA_BUS_MODE + i * 4);
-
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
-@@ -35,15 +35,17 @@ static void dwmac4_core_init(struct mac_
- if (hw->ps) {
- value |= GMAC_CONFIG_TE;
-
-- if (hw->ps == SPEED_1000) {
-- value &= ~GMAC_CONFIG_PS;
-- } else {
-- value |= GMAC_CONFIG_PS;
--
-- if (hw->ps == SPEED_10)
-- value &= ~GMAC_CONFIG_FES;
-- else
-- value |= GMAC_CONFIG_FES;
-+ value &= hw->link.speed_mask;
-+ switch (hw->ps) {
-+ case SPEED_1000:
-+ value |= hw->link.speed1000;
-+ break;
-+ case SPEED_100:
-+ value |= hw->link.speed100;
-+ break;
-+ case SPEED_10:
-+ value |= hw->link.speed10;
-+ break;
- }
- }
-
-@@ -115,7 +117,7 @@ static void dwmac4_tx_queue_routing(stru
- void __iomem *ioaddr = hw->pcsr;
- u32 value;
-
-- const struct stmmac_rx_routing route_possibilities[] = {
-+ static const struct stmmac_rx_routing route_possibilities[] = {
- { GMAC_RXQCTRL_AVCPQ_MASK, GMAC_RXQCTRL_AVCPQ_SHIFT },
- { GMAC_RXQCTRL_PTPQ_MASK, GMAC_RXQCTRL_PTPQ_SHIFT },
- { GMAC_RXQCTRL_DCBCPQ_MASK, GMAC_RXQCTRL_DCBCPQ_SHIFT },
-@@ -747,9 +749,11 @@ struct mac_device_info *dwmac4_setup(voi
- if (mac->multicast_filter_bins)
- mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
-
-- mac->link.port = GMAC_CONFIG_PS;
- mac->link.duplex = GMAC_CONFIG_DM;
-- mac->link.speed = GMAC_CONFIG_FES;
-+ mac->link.speed10 = GMAC_CONFIG_PS;
-+ mac->link.speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS;
-+ mac->link.speed1000 = 0;
-+ mac->link.speed_mask = GMAC_CONFIG_FES | GMAC_CONFIG_PS;
- mac->mii.addr = GMAC_MDIO_ADDR;
- mac->mii.data = GMAC_MDIO_DATA;
- mac->mii.addr_shift = 21;
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
-@@ -71,9 +71,9 @@ static void dwmac4_dma_axi(void __iomem
- writel(value, ioaddr + DMA_SYS_BUS_MODE);
- }
-
--void dwmac4_dma_init_rx_chan(void __iomem *ioaddr,
-- struct stmmac_dma_cfg *dma_cfg,
-- u32 dma_rx_phy, u32 chan)
-+static void dwmac4_dma_init_rx_chan(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_rx_phy, u32 chan)
- {
- u32 value;
- u32 rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
-@@ -85,9 +85,9 @@ void dwmac4_dma_init_rx_chan(void __iome
- writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(chan));
- }
-
--void dwmac4_dma_init_tx_chan(void __iomem *ioaddr,
-- struct stmmac_dma_cfg *dma_cfg,
-- u32 dma_tx_phy, u32 chan)
-+static void dwmac4_dma_init_tx_chan(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg,
-+ u32 dma_tx_phy, u32 chan)
- {
- u32 value;
- u32 txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
-@@ -99,8 +99,8 @@ void dwmac4_dma_init_tx_chan(void __iome
- writel(dma_tx_phy, ioaddr + DMA_CHAN_TX_BASE_ADDR(chan));
- }
-
--void dwmac4_dma_init_channel(void __iomem *ioaddr,
-- struct stmmac_dma_cfg *dma_cfg, u32 chan)
-+static void dwmac4_dma_init_channel(void __iomem *ioaddr,
-+ struct stmmac_dma_cfg *dma_cfg, u32 chan)
- {
- u32 value;
-
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
-@@ -136,6 +136,9 @@
- #define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */
- #define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */
-
-+#define NUM_DWMAC100_DMA_REGS 9
-+#define NUM_DWMAC1000_DMA_REGS 23
-+
- void dwmac_enable_dma_transmission(void __iomem *ioaddr);
- void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan);
- void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan);
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
-@@ -248,6 +248,7 @@ void stmmac_set_mac_addr(void __iomem *i
- data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
- writel(data, ioaddr + low);
- }
-+EXPORT_SYMBOL_GPL(stmmac_set_mac_addr);
-
- /* Enable disable MAC RX/TX */
- void stmmac_set_mac(void __iomem *ioaddr, bool enable)
-@@ -279,4 +280,4 @@ void stmmac_get_mac_addr(void __iomem *i
- addr[4] = hi_addr & 0xff;
- addr[5] = (hi_addr >> 8) & 0xff;
- }
--
-+EXPORT_SYMBOL_GPL(stmmac_get_mac_addr);
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-@@ -104,7 +104,7 @@ struct stmmac_priv {
- /* TX Queue */
- struct stmmac_tx_queue tx_queue[MTL_MAX_TX_QUEUES];
-
-- int oldlink;
-+ bool oldlink;
- int speed;
- int oldduplex;
- unsigned int flow_ctrl;
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
-@@ -29,10 +29,12 @@
- #include "stmmac.h"
- #include "dwmac_dma.h"
-
--#define REG_SPACE_SIZE 0x1054
-+#define REG_SPACE_SIZE 0x1060
- #define MAC100_ETHTOOL_NAME "st_mac100"
- #define GMAC_ETHTOOL_NAME "st_gmac"
-
-+#define ETHTOOL_DMA_OFFSET 55
-+
- struct stmmac_stats {
- char stat_string[ETH_GSTRING_LEN];
- int sizeof_stat;
-@@ -273,7 +275,6 @@ static int stmmac_ethtool_get_link_ksett
- {
- struct stmmac_priv *priv = netdev_priv(dev);
- struct phy_device *phy = dev->phydev;
-- int rc;
-
- if (priv->hw->pcs & STMMAC_PCS_RGMII ||
- priv->hw->pcs & STMMAC_PCS_SGMII) {
-@@ -364,8 +365,8 @@ static int stmmac_ethtool_get_link_ksett
- "link speed / duplex setting\n", dev->name);
- return -EBUSY;
- }
-- rc = phy_ethtool_ksettings_get(phy, cmd);
-- return rc;
-+ phy_ethtool_ksettings_get(phy, cmd);
-+ return 0;
- }
-
- static int
-@@ -443,6 +444,9 @@ static void stmmac_ethtool_gregs(struct
-
- priv->hw->mac->dump_regs(priv->hw, reg_space);
- priv->hw->dma->dump_regs(priv->ioaddr, reg_space);
-+ /* Copy DMA registers to where ethtool expects them */
-+ memcpy(&reg_space[ETHTOOL_DMA_OFFSET], &reg_space[DMA_BUS_MODE / 4],
-+ NUM_DWMAC1000_DMA_REGS * 4);
- }
-
- static void
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -235,6 +235,17 @@ static void stmmac_clk_csr_set(struct st
- else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M))
- priv->clk_csr = STMMAC_CSR_250_300M;
- }
-+
-+ if (priv->plat->has_sun8i) {
-+ if (clk_rate > 160000000)
-+ priv->clk_csr = 0x03;
-+ else if (clk_rate > 80000000)
-+ priv->clk_csr = 0x02;
-+ else if (clk_rate > 40000000)
-+ priv->clk_csr = 0x01;
-+ else
-+ priv->clk_csr = 0;
-+ }
- }
-
- static void print_pkt(unsigned char *buf, int len)
-@@ -789,7 +800,7 @@ static void stmmac_adjust_link(struct ne
- struct stmmac_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = dev->phydev;
- unsigned long flags;
-- int new_state = 0;
-+ bool new_state = false;
-
- if (!phydev)
- return;
-@@ -802,8 +813,8 @@ static void stmmac_adjust_link(struct ne
- /* Now we make sure that we can be in full duplex mode.
- * If not, we operate in half-duplex mode. */
- if (phydev->duplex != priv->oldduplex) {
-- new_state = 1;
-- if (!(phydev->duplex))
-+ new_state = true;
-+ if (!phydev->duplex)
- ctrl &= ~priv->hw->link.duplex;
- else
- ctrl |= priv->hw->link.duplex;
-@@ -814,30 +825,17 @@ static void stmmac_adjust_link(struct ne
- stmmac_mac_flow_ctrl(priv, phydev->duplex);
-
- if (phydev->speed != priv->speed) {
-- new_state = 1;
-+ new_state = true;
-+ ctrl &= ~priv->hw->link.speed_mask;
- switch (phydev->speed) {
-- case 1000:
-- if (priv->plat->has_gmac ||
-- priv->plat->has_gmac4)
-- ctrl &= ~priv->hw->link.port;
-+ case SPEED_1000:
-+ ctrl |= priv->hw->link.speed1000;
- break;
-- case 100:
-- if (priv->plat->has_gmac ||
-- priv->plat->has_gmac4) {
-- ctrl |= priv->hw->link.port;
-- ctrl |= priv->hw->link.speed;
-- } else {
-- ctrl &= ~priv->hw->link.port;
-- }
-+ case SPEED_100:
-+ ctrl |= priv->hw->link.speed100;
- break;
-- case 10:
-- if (priv->plat->has_gmac ||
-- priv->plat->has_gmac4) {
-- ctrl |= priv->hw->link.port;
-- ctrl &= ~(priv->hw->link.speed);
-- } else {
-- ctrl &= ~priv->hw->link.port;
-- }
-+ case SPEED_10:
-+ ctrl |= priv->hw->link.speed10;
- break;
- default:
- netif_warn(priv, link, priv->dev,
-@@ -853,12 +851,12 @@ static void stmmac_adjust_link(struct ne
- writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
-
- if (!priv->oldlink) {
-- new_state = 1;
-- priv->oldlink = 1;
-+ new_state = true;
-+ priv->oldlink = true;
- }
- } else if (priv->oldlink) {
-- new_state = 1;
-- priv->oldlink = 0;
-+ new_state = true;
-+ priv->oldlink = false;
- priv->speed = SPEED_UNKNOWN;
- priv->oldduplex = DUPLEX_UNKNOWN;
- }
-@@ -921,7 +919,7 @@ static int stmmac_init_phy(struct net_de
- char bus_id[MII_BUS_ID_SIZE];
- int interface = priv->plat->interface;
- int max_speed = priv->plat->max_speed;
-- priv->oldlink = 0;
-+ priv->oldlink = false;
- priv->speed = SPEED_UNKNOWN;
- priv->oldduplex = DUPLEX_UNKNOWN;
-
-@@ -1456,7 +1454,7 @@ static void free_dma_rx_desc_resources(s
- static void free_dma_tx_desc_resources(struct stmmac_priv *priv)
- {
- u32 tx_count = priv->plat->tx_queues_to_use;
-- u32 queue = 0;
-+ u32 queue;
-
- /* Free TX queue resources */
- for (queue = 0; queue < tx_count; queue++) {
-@@ -1505,7 +1503,7 @@ static int alloc_dma_rx_desc_resources(s
- sizeof(dma_addr_t),
- GFP_KERNEL);
- if (!rx_q->rx_skbuff_dma)
-- return -ENOMEM;
-+ goto err_dma;
-
- rx_q->rx_skbuff = kmalloc_array(DMA_RX_SIZE,
- sizeof(struct sk_buff *),
-@@ -1568,13 +1566,13 @@ static int alloc_dma_tx_desc_resources(s
- sizeof(*tx_q->tx_skbuff_dma),
- GFP_KERNEL);
- if (!tx_q->tx_skbuff_dma)
-- return -ENOMEM;
-+ goto err_dma;
-
- tx_q->tx_skbuff = kmalloc_array(DMA_TX_SIZE,
- sizeof(struct sk_buff *),
- GFP_KERNEL);
- if (!tx_q->tx_skbuff)
-- goto err_dma_buffers;
-+ goto err_dma;
-
- if (priv->extend_desc) {
- tx_q->dma_etx = dma_zalloc_coherent(priv->device,
-@@ -1584,7 +1582,7 @@ static int alloc_dma_tx_desc_resources(s
- &tx_q->dma_tx_phy,
- GFP_KERNEL);
- if (!tx_q->dma_etx)
-- goto err_dma_buffers;
-+ goto err_dma;
- } else {
- tx_q->dma_tx = dma_zalloc_coherent(priv->device,
- DMA_TX_SIZE *
-@@ -1593,13 +1591,13 @@ static int alloc_dma_tx_desc_resources(s
- &tx_q->dma_tx_phy,
- GFP_KERNEL);
- if (!tx_q->dma_tx)
-- goto err_dma_buffers;
-+ goto err_dma;
- }
- }
-
- return 0;
-
--err_dma_buffers:
-+err_dma:
- free_dma_tx_desc_resources(priv);
-
- return ret;
-@@ -2907,8 +2905,7 @@ static netdev_tx_t stmmac_tso_xmit(struc
- priv->xstats.tx_set_ic_bit++;
- }
-
-- if (!priv->hwts_tx_en)
-- skb_tx_timestamp(skb);
-+ skb_tx_timestamp(skb);
-
- if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
- priv->hwts_tx_en)) {
-@@ -2993,7 +2990,7 @@ static netdev_tx_t stmmac_xmit(struct sk
-
- /* Manage oversized TCP frames for GMAC4 device */
- if (skb_is_gso(skb) && priv->tso) {
-- if (ip_hdr(skb)->protocol == IPPROTO_TCP)
-+ if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))
- return stmmac_tso_xmit(skb, dev);
- }
-
-@@ -3124,8 +3121,7 @@ static netdev_tx_t stmmac_xmit(struct sk
- priv->xstats.tx_set_ic_bit++;
- }
-
-- if (!priv->hwts_tx_en)
-- skb_tx_timestamp(skb);
-+ skb_tx_timestamp(skb);
-
- /* Ready to fill the first descriptor and set the OWN bit w/o any
- * problems because all the descriptors are actually ready to be
-@@ -4002,7 +3998,9 @@ static int stmmac_hw_init(struct stmmac_
- struct mac_device_info *mac;
-
- /* Identify the MAC HW device */
-- if (priv->plat->has_gmac) {
-+ if (priv->plat->setup) {
-+ mac = priv->plat->setup(priv);
-+ } else if (priv->plat->has_gmac) {
- priv->dev->priv_flags |= IFF_UNICAST_FLT;
- mac = dwmac1000_setup(priv->ioaddr,
- priv->plat->multicast_filter_bins,
-@@ -4022,6 +4020,10 @@ static int stmmac_hw_init(struct stmmac_
-
- priv->hw = mac;
-
-+ /* dwmac-sun8i only work in chain mode */
-+ if (priv->plat->has_sun8i)
-+ chain_mode = 1;
-+
- /* To use the chained or ring mode */
- if (priv->synopsys_id >= DWMAC_CORE_4_00) {
- priv->hw->mode = &dwmac4_ring_mode_ops;
-@@ -4150,8 +4152,15 @@ int stmmac_dvr_probe(struct device *devi
- if ((phyaddr >= 0) && (phyaddr <= 31))
- priv->plat->phy_addr = phyaddr;
-
-- if (priv->plat->stmmac_rst)
-+ if (priv->plat->stmmac_rst) {
-+ ret = reset_control_assert(priv->plat->stmmac_rst);
- reset_control_deassert(priv->plat->stmmac_rst);
-+ /* Some reset controllers have only reset callback instead of
-+ * assert + deassert callbacks pair.
-+ */
-+ if (ret == -ENOTSUPP)
-+ reset_control_reset(priv->plat->stmmac_rst);
-+ }
-
- /* Init MAC and get the capabilities */
- ret = stmmac_hw_init(priv);
-@@ -4168,7 +4177,7 @@ int stmmac_dvr_probe(struct device *devi
- NETIF_F_RXCSUM;
-
- if ((priv->plat->tso_en) && (priv->dma_cap.tsoen)) {
-- ndev->hw_features |= NETIF_F_TSO;
-+ ndev->hw_features |= NETIF_F_TSO | NETIF_F_TSO6;
- priv->tso = true;
- dev_info(priv->device, "TSO feature enabled\n");
- }
-@@ -4330,7 +4339,7 @@ int stmmac_suspend(struct device *dev)
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
-- priv->oldlink = 0;
-+ priv->oldlink = false;
- priv->speed = SPEED_UNKNOWN;
- priv->oldduplex = DUPLEX_UNKNOWN;
- return 0;
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
-@@ -204,6 +204,7 @@ int stmmac_mdio_register(struct net_devi
- struct stmmac_priv *priv = netdev_priv(ndev);
- struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
- struct device_node *mdio_node = priv->plat->mdio_node;
-+ struct device *dev = ndev->dev.parent;
- int addr, found;
-
- if (!mdio_bus_data)
-@@ -237,7 +238,7 @@ int stmmac_mdio_register(struct net_devi
- else
- err = mdiobus_register(new_bus);
- if (err != 0) {
-- netdev_err(ndev, "Cannot register the MDIO bus\n");
-+ dev_err(dev, "Cannot register the MDIO bus\n");
- goto bus_register_fail;
- }
-
-@@ -292,7 +293,7 @@ int stmmac_mdio_register(struct net_devi
- }
-
- if (!found && !mdio_node) {
-- netdev_warn(ndev, "No PHY found\n");
-+ dev_warn(dev, "No PHY found\n");
- mdiobus_unregister(new_bus);
- mdiobus_free(new_bus);
- return -ENODEV;
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
-@@ -30,42 +30,39 @@
- * negative value of the address means that MAC controller is not connected
- * with PHY.
- */
--struct stmmac_pci_dmi_data {
-- const char *name;
-- const char *asset_tag;
-+struct stmmac_pci_func_data {
- unsigned int func;
- int phy_addr;
- };
-
-+struct stmmac_pci_dmi_data {
-+ const struct stmmac_pci_func_data *func;
-+ size_t nfuncs;
-+};
-+
- struct stmmac_pci_info {
-- struct pci_dev *pdev;
-- int (*setup)(struct plat_stmmacenet_data *plat,
-- struct stmmac_pci_info *info);
-- struct stmmac_pci_dmi_data *dmi;
-+ int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
- };
-
--static int stmmac_pci_find_phy_addr(struct stmmac_pci_info *info)
-+static int stmmac_pci_find_phy_addr(struct pci_dev *pdev,
-+ const struct dmi_system_id *dmi_list)
- {
-- const char *name = dmi_get_system_info(DMI_BOARD_NAME);
-- const char *asset_tag = dmi_get_system_info(DMI_BOARD_ASSET_TAG);
-- unsigned int func = PCI_FUNC(info->pdev->devfn);
-- struct stmmac_pci_dmi_data *dmi;
--
-- /*
-- * Galileo boards with old firmware don't support DMI. We always return
-- * 1 here, so at least first found MAC controller would be probed.
-- */
-- if (!name)
-- return 1;
--
-- for (dmi = info->dmi; dmi->name && *dmi->name; dmi++) {
-- if (!strcmp(dmi->name, name) && dmi->func == func) {
-- /* If asset tag is provided, match on it as well. */
-- if (dmi->asset_tag && strcmp(dmi->asset_tag, asset_tag))
-- continue;
-- return dmi->phy_addr;
-- }
-- }
-+ const struct stmmac_pci_func_data *func_data;
-+ const struct stmmac_pci_dmi_data *dmi_data;
-+ const struct dmi_system_id *dmi_id;
-+ int func = PCI_FUNC(pdev->devfn);
-+ size_t n;
-+
-+ dmi_id = dmi_first_match(dmi_list);
-+ if (!dmi_id)
-+ return -ENODEV;
-+
-+ dmi_data = dmi_id->driver_data;
-+ func_data = dmi_data->func;
-+
-+ for (n = 0; n < dmi_data->nfuncs; n++, func_data++)
-+ if (func_data->func == func)
-+ return func_data->phy_addr;
-
- return -ENODEV;
- }
-@@ -100,7 +97,8 @@ static void common_default_data(struct p
- plat->rx_queues_cfg[0].pkt_route = 0x0;
- }
-
--static void stmmac_default_data(struct plat_stmmacenet_data *plat)
-+static int stmmac_default_data(struct pci_dev *pdev,
-+ struct plat_stmmacenet_data *plat)
- {
- /* Set common default data first */
- common_default_data(plat);
-@@ -112,12 +110,77 @@ static void stmmac_default_data(struct p
- plat->dma_cfg->pbl = 32;
- plat->dma_cfg->pblx8 = true;
- /* TODO: AXI */
-+
-+ return 0;
- }
-
--static int quark_default_data(struct plat_stmmacenet_data *plat,
-- struct stmmac_pci_info *info)
-+static const struct stmmac_pci_info stmmac_pci_info = {
-+ .setup = stmmac_default_data,
-+};
-+
-+static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
-+ {
-+ .func = 6,
-+ .phy_addr = 1,
-+ },
-+};
-+
-+static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = {
-+ .func = galileo_stmmac_func_data,
-+ .nfuncs = ARRAY_SIZE(galileo_stmmac_func_data),
-+};
-+
-+static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = {
-+ {
-+ .func = 6,
-+ .phy_addr = 1,
-+ },
-+ {
-+ .func = 7,
-+ .phy_addr = 1,
-+ },
-+};
-+
-+static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = {
-+ .func = iot2040_stmmac_func_data,
-+ .nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data),
-+};
-+
-+static const struct dmi_system_id quark_pci_dmi[] = {
-+ {
-+ .matches = {
-+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"),
-+ },
-+ .driver_data = (void *)&galileo_stmmac_dmi_data,
-+ },
-+ {
-+ .matches = {
-+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
-+ },
-+ .driver_data = (void *)&galileo_stmmac_dmi_data,
-+ },
-+ {
-+ .matches = {
-+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
-+ DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
-+ "6ES7647-0AA00-0YA2"),
-+ },
-+ .driver_data = (void *)&galileo_stmmac_dmi_data,
-+ },
-+ {
-+ .matches = {
-+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
-+ DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
-+ "6ES7647-0AA00-1YA2"),
-+ },
-+ .driver_data = (void *)&iot2040_stmmac_dmi_data,
-+ },
-+ {}
-+};
-+
-+static int quark_default_data(struct pci_dev *pdev,
-+ struct plat_stmmacenet_data *plat)
- {
-- struct pci_dev *pdev = info->pdev;
- int ret;
-
- /* Set common default data first */
-@@ -127,9 +190,19 @@ static int quark_default_data(struct pla
- * Refuse to load the driver and register net device if MAC controller
- * does not connect to any PHY interface.
- */
-- ret = stmmac_pci_find_phy_addr(info);
-- if (ret < 0)
-- return ret;
-+ ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi);
-+ if (ret < 0) {
-+ /* Return error to the caller on DMI enabled boards. */
-+ if (dmi_get_system_info(DMI_BOARD_NAME))
-+ return ret;
-+
-+ /*
-+ * Galileo boards with old firmware don't support DMI. We always
-+ * use 1 here as PHY address, so at least the first found MAC
-+ * controller would be probed.
-+ */
-+ ret = 1;
-+ }
-
- plat->bus_id = PCI_DEVID(pdev->bus->number, pdev->devfn);
- plat->phy_addr = ret;
-@@ -143,41 +216,8 @@ static int quark_default_data(struct pla
- return 0;
- }
-
--static struct stmmac_pci_dmi_data quark_pci_dmi_data[] = {
-- {
-- .name = "Galileo",
-- .func = 6,
-- .phy_addr = 1,
-- },
-- {
-- .name = "GalileoGen2",
-- .func = 6,
-- .phy_addr = 1,
-- },
-- {
-- .name = "SIMATIC IOT2000",
-- .asset_tag = "6ES7647-0AA00-0YA2",
-- .func = 6,
-- .phy_addr = 1,
-- },
-- {
-- .name = "SIMATIC IOT2000",
-- .asset_tag = "6ES7647-0AA00-1YA2",
-- .func = 6,
-- .phy_addr = 1,
-- },
-- {
-- .name = "SIMATIC IOT2000",
-- .asset_tag = "6ES7647-0AA00-1YA2",
-- .func = 7,
-- .phy_addr = 1,
-- },
-- {}
--};
--
--static struct stmmac_pci_info quark_pci_info = {
-+static const struct stmmac_pci_info quark_pci_info = {
- .setup = quark_default_data,
-- .dmi = quark_pci_dmi_data,
- };
-
- /**
-@@ -236,15 +276,9 @@ static int stmmac_pci_probe(struct pci_d
-
- pci_set_master(pdev);
-
-- if (info) {
-- info->pdev = pdev;
-- if (info->setup) {
-- ret = info->setup(plat, info);
-- if (ret)
-- return ret;
-- }
-- } else
-- stmmac_default_data(plat);
-+ ret = info->setup(pdev, plat);
-+ if (ret)
-+ return ret;
-
- pci_enable_msi(pdev);
-
-@@ -306,14 +340,21 @@ static int stmmac_pci_resume(struct devi
-
- static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume);
-
--#define STMMAC_VENDOR_ID 0x700
-+/* synthetic ID, no official vendor */
-+#define PCI_VENDOR_ID_STMMAC 0x700
-+
- #define STMMAC_QUARK_ID 0x0937
- #define STMMAC_DEVICE_ID 0x1108
-
-+#define STMMAC_DEVICE(vendor_id, dev_id, info) { \
-+ PCI_VDEVICE(vendor_id, dev_id), \
-+ .driver_data = (kernel_ulong_t)&info \
-+ }
-+
- static const struct pci_device_id stmmac_id_table[] = {
-- {PCI_DEVICE(STMMAC_VENDOR_ID, STMMAC_DEVICE_ID)},
-- {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_MAC)},
-- {PCI_VDEVICE(INTEL, STMMAC_QUARK_ID), (kernel_ulong_t)&quark_pci_info},
-+ STMMAC_DEVICE(STMMAC, STMMAC_DEVICE_ID, stmmac_pci_info),
-+ STMMAC_DEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_MAC, stmmac_pci_info),
-+ STMMAC_DEVICE(INTEL, STMMAC_QUARK_ID, quark_pci_info),
- {}
- };
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-@@ -309,6 +309,13 @@ static int stmmac_dt_phy(struct plat_stm
- struct device_node *np, struct device *dev)
- {
- bool mdio = true;
-+ static const struct of_device_id need_mdio_ids[] = {
-+ { .compatible = "snps,dwc-qos-ethernet-4.10" },
-+ { .compatible = "allwinner,sun8i-a83t-emac" },
-+ { .compatible = "allwinner,sun8i-h3-emac" },
-+ { .compatible = "allwinner,sun8i-v3s-emac" },
-+ { .compatible = "allwinner,sun50i-a64-emac" },
-+ };
-
- /* If phy-handle property is passed from DT, use it as the PHY */
- plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
-@@ -325,8 +332,7 @@ static int stmmac_dt_phy(struct plat_stm
- mdio = false;
- }
-
-- /* exception for dwmac-dwc-qos-eth glue logic */
-- if (of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
-+ if (of_match_node(need_mdio_ids, np)) {
- plat->mdio_node = of_get_child_by_name(np, "mdio");
- } else {
- /**
---- a/include/linux/stmmac.h
-+++ b/include/linux/stmmac.h
-@@ -177,6 +177,7 @@ struct plat_stmmacenet_data {
- void (*fix_mac_speed)(void *priv, unsigned int speed);
- int (*init)(struct platform_device *pdev, void *priv);
- void (*exit)(struct platform_device *pdev, void *priv);
-+ struct mac_device_info *(*setup)(void *priv);
- void *bsp_priv;
- struct clk *stmmac_clk;
- struct clk *pclk;
-@@ -185,6 +186,7 @@ struct plat_stmmacenet_data {
- struct reset_control *stmmac_rst;
- struct stmmac_axi *axi;
- int has_gmac4;
-+ bool has_sun8i;
- bool tso_en;
- int mac_port_sel_speed;
- bool en_tx_lpi_clockgating;
diff --git a/target/linux/sunxi/patches-4.9/0054-crypto-sun4i-ss_support_the_Security_System_PRNG.patch b/target/linux/sunxi/patches-4.9/0054-crypto-sun4i-ss_support_the_Security_System_PRNG.patch
deleted file mode 100644
index f2bac1fde0..0000000000
--- a/target/linux/sunxi/patches-4.9/0054-crypto-sun4i-ss_support_the_Security_System_PRNG.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From b8ae5c7387ad075ee61e8c8774ce2bca46bc9236 Mon Sep 17 00:00:00 2001
-From: Corentin LABBE <clabbe.montjoie@gmail.com>
-Date: Mon, 3 Jul 2017 20:48:48 +0200
-Subject: crypto: sun4i-ss - support the Security System PRNG
-
-The Security System has a PRNG, this patch adds support for it via
-crypto_rng.
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/Kconfig | 8 +++++
- drivers/crypto/sunxi-ss/Makefile | 1 +
- drivers/crypto/sunxi-ss/sun4i-ss-core.c | 30 ++++++++++++++++++
- drivers/crypto/sunxi-ss/sun4i-ss-prng.c | 56 +++++++++++++++++++++++++++++++++
- drivers/crypto/sunxi-ss/sun4i-ss.h | 11 +++++++
- 5 files changed, 106 insertions(+)
- create mode 100644 drivers/crypto/sunxi-ss/sun4i-ss-prng.c
-
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -538,6 +538,14 @@ config CRYPTO_DEV_SUN4I_SS
- To compile this driver as a module, choose M here: the module
- will be called sun4i-ss.
-
-+config CRYPTO_DEV_SUN4I_SS_PRNG
-+ bool "Support for Allwinner Security System PRNG"
-+ depends on CRYPTO_DEV_SUN4I_SS
-+ select CRYPTO_RNG
-+ help
-+ Select this option if you want to provide kernel-side support for
-+ the Pseudo-Random Number Generator found in the Security System.
-+
- config CRYPTO_DEV_ROCKCHIP
- tristate "Rockchip's Cryptographic Engine driver"
- depends on OF && ARCH_ROCKCHIP
---- a/drivers/crypto/sunxi-ss/Makefile
-+++ b/drivers/crypto/sunxi-ss/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sun4i-ss.o
- sun4i-ss-y += sun4i-ss-core.o sun4i-ss-hash.o sun4i-ss-cipher.o
-+sun4i-ss-$(CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG) += sun4i-ss-prng.o
---- a/drivers/crypto/sunxi-ss/sun4i-ss-core.c
-+++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
-@@ -214,6 +214,23 @@ static struct sun4i_ss_alg_template ss_a
- }
- }
- },
-+#ifdef CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG
-+{
-+ .type = CRYPTO_ALG_TYPE_RNG,
-+ .alg.rng = {
-+ .base = {
-+ .cra_name = "stdrng",
-+ .cra_driver_name = "sun4i_ss_rng",
-+ .cra_priority = 300,
-+ .cra_ctxsize = 0,
-+ .cra_module = THIS_MODULE,
-+ },
-+ .generate = sun4i_ss_prng_generate,
-+ .seed = sun4i_ss_prng_seed,
-+ .seedsize = SS_SEED_LEN / BITS_PER_BYTE,
-+ }
-+},
-+#endif
- };
-
- static int sun4i_ss_probe(struct platform_device *pdev)
-@@ -356,6 +373,13 @@ static int sun4i_ss_probe(struct platfor
- goto error_alg;
- }
- break;
-+ case CRYPTO_ALG_TYPE_RNG:
-+ err = crypto_register_rng(&ss_algs[i].alg.rng);
-+ if (err) {
-+ dev_err(ss->dev, "Fail to register %s\n",
-+ ss_algs[i].alg.rng.base.cra_name);
-+ }
-+ break;
- }
- }
- platform_set_drvdata(pdev, ss);
-@@ -370,6 +394,9 @@ error_alg:
- case CRYPTO_ALG_TYPE_AHASH:
- crypto_unregister_ahash(&ss_algs[i].alg.hash);
- break;
-+ case CRYPTO_ALG_TYPE_RNG:
-+ crypto_unregister_rng(&ss_algs[i].alg.rng);
-+ break;
- }
- }
- if (ss->reset)
-@@ -394,6 +421,9 @@ static int sun4i_ss_remove(struct platfo
- case CRYPTO_ALG_TYPE_AHASH:
- crypto_unregister_ahash(&ss_algs[i].alg.hash);
- break;
-+ case CRYPTO_ALG_TYPE_RNG:
-+ crypto_unregister_rng(&ss_algs[i].alg.rng);
-+ break;
- }
- }
-
---- /dev/null
-+++ b/drivers/crypto/sunxi-ss/sun4i-ss-prng.c
-@@ -0,0 +1,56 @@
-+#include "sun4i-ss.h"
-+
-+int sun4i_ss_prng_seed(struct crypto_rng *tfm, const u8 *seed,
-+ unsigned int slen)
-+{
-+ struct sun4i_ss_alg_template *algt;
-+ struct rng_alg *alg = crypto_rng_alg(tfm);
-+
-+ algt = container_of(alg, struct sun4i_ss_alg_template, alg.rng);
-+ memcpy(algt->ss->seed, seed, slen);
-+
-+ return 0;
-+}
-+
-+int sun4i_ss_prng_generate(struct crypto_rng *tfm, const u8 *src,
-+ unsigned int slen, u8 *dst, unsigned int dlen)
-+{
-+ struct sun4i_ss_alg_template *algt;
-+ struct rng_alg *alg = crypto_rng_alg(tfm);
-+ int i;
-+ u32 v;
-+ u32 *data = (u32 *)dst;
-+ const u32 mode = SS_OP_PRNG | SS_PRNG_CONTINUE | SS_ENABLED;
-+ size_t len;
-+ struct sun4i_ss_ctx *ss;
-+ unsigned int todo = (dlen / 4) * 4;
-+
-+ algt = container_of(alg, struct sun4i_ss_alg_template, alg.rng);
-+ ss = algt->ss;
-+
-+ spin_lock(&ss->slock);
-+
-+ writel(mode, ss->base + SS_CTL);
-+
-+ while (todo > 0) {
-+ /* write the seed */
-+ for (i = 0; i < SS_SEED_LEN / BITS_PER_LONG; i++)
-+ writel(ss->seed[i], ss->base + SS_KEY0 + i * 4);
-+
-+ /* Read the random data */
-+ len = min_t(size_t, SS_DATA_LEN / BITS_PER_BYTE, todo);
-+ readsl(ss->base + SS_TXFIFO, data, len / 4);
-+ data += len / 4;
-+ todo -= len;
-+
-+ /* Update the seed */
-+ for (i = 0; i < SS_SEED_LEN / BITS_PER_LONG; i++) {
-+ v = readl(ss->base + SS_KEY0 + i * 4);
-+ ss->seed[i] = v;
-+ }
-+ }
-+
-+ writel(0, ss->base + SS_CTL);
-+ spin_unlock(&ss->slock);
-+ return dlen;
-+}
---- a/drivers/crypto/sunxi-ss/sun4i-ss.h
-+++ b/drivers/crypto/sunxi-ss/sun4i-ss.h
-@@ -30,6 +30,7 @@
- #include <crypto/aes.h>
- #include <crypto/des.h>
- #include <crypto/internal/rng.h>
-+#include <crypto/rng.h>
-
- #define SS_CTL 0x00
- #define SS_KEY0 0x04
-@@ -125,6 +126,9 @@
- #define SS_RXFIFO_EMP_INT_ENABLE (1 << 2)
- #define SS_TXFIFO_AVA_INT_ENABLE (1 << 0)
-
-+#define SS_SEED_LEN 192
-+#define SS_DATA_LEN 160
-+
- struct sun4i_ss_ctx {
- void __iomem *base;
- int irq;
-@@ -134,6 +138,9 @@ struct sun4i_ss_ctx {
- struct device *dev;
- struct resource *res;
- spinlock_t slock; /* control the use of the device */
-+#ifdef CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG
-+ u32 seed[SS_SEED_LEN / BITS_PER_LONG];
-+#endif
- };
-
- struct sun4i_ss_alg_template {
-@@ -142,6 +149,7 @@ struct sun4i_ss_alg_template {
- union {
- struct crypto_alg crypto;
- struct ahash_alg hash;
-+ struct rng_alg rng;
- } alg;
- struct sun4i_ss_ctx *ss;
- };
-@@ -199,3 +207,6 @@ int sun4i_ss_des_setkey(struct crypto_ab
- unsigned int keylen);
- int sun4i_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
- unsigned int keylen);
-+int sun4i_ss_prng_generate(struct crypto_rng *tfm, const u8 *src,
-+ unsigned int slen, u8 *dst, unsigned int dlen);
-+int sun4i_ss_prng_seed(struct crypto_rng *tfm, const u8 *seed, unsigned int slen);
diff --git a/target/linux/sunxi/patches-4.9/0060-arm64-allwinner-sun50i-a64-Add-dt-node-for-the-sysco.patch b/target/linux/sunxi/patches-4.9/0060-arm64-allwinner-sun50i-a64-Add-dt-node-for-the-sysco.patch
deleted file mode 100644
index 911ea49967..0000000000
--- a/target/linux/sunxi/patches-4.9/0060-arm64-allwinner-sun50i-a64-Add-dt-node-for-the-sysco.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 79b953605ded6a9a995040a1c8cc665127a6411a Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe.montjoie@gmail.com>
-Date: Wed, 31 May 2017 09:18:45 +0200
-Subject: arm64: allwinner: sun50i-a64: Add dt node for the syscon control
- module
-
-This patch add the dt node for the syscon register present on the
-Allwinner A64.
-
-Only two register are present in this syscon and the only one useful is
-the one dedicated to EMAC clock.
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -129,6 +129,12 @@
- #size-cells = <1>;
- ranges;
-
-+ syscon: syscon@1c00000 {
-+ compatible = "allwinner,sun50i-a64-system-controller",
-+ "syscon";
-+ reg = <0x01c00000 0x1000>;
-+ };
-+
- mmc0: mmc@1c0f000 {
- compatible = "allwinner,sun50i-a64-mmc";
- reg = <0x01c0f000 0x1000>;
diff --git a/target/linux/sunxi/patches-4.9/0061-arm64-allwinner-sun50i-a64-add-dwmac-sun8i-Ethernet-.patch b/target/linux/sunxi/patches-4.9/0061-arm64-allwinner-sun50i-a64-add-dwmac-sun8i-Ethernet-.patch
deleted file mode 100644
index e59c3e8735..0000000000
--- a/target/linux/sunxi/patches-4.9/0061-arm64-allwinner-sun50i-a64-add-dwmac-sun8i-Ethernet-.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From e53f67e981bcc5547857475241b3a4a066955f8c Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe.montjoie@gmail.com>
-Date: Wed, 31 May 2017 09:18:46 +0200
-Subject: arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
-
-The dwmac-sun8i is an Ethernet MAC that supports 10/100/1000 Mbit
-connections. It is very similar to the device found in the Allwinner
-H3, but lacks the internal 100 Mbit PHY and its associated control
-bits.
-This adds the necessary bits to the Allwinner A64 SoC .dtsi, but keeps
-it disabled at this level.
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 35 +++++++++++++++++++++++++++
- 1 file changed, 35 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -284,6 +284,21 @@
- bias-pull-up;
- };
-
-+ rmii_pins: rmii_pins {
-+ pins = "PD10", "PD11", "PD13", "PD14", "PD17",
-+ "PD18", "PD19", "PD20", "PD22", "PD23";
-+ function = "emac";
-+ drive-strength = <40>;
-+ };
-+
-+ rgmii_pins: rgmii_pins {
-+ pins = "PD8", "PD9", "PD10", "PD11", "PD12",
-+ "PD13", "PD15", "PD16", "PD17", "PD18",
-+ "PD19", "PD20", "PD21", "PD22", "PD23";
-+ function = "emac";
-+ drive-strength = <40>;
-+ };
-+
- uart0_pins_a: uart0@0 {
- pins = "PB8", "PB9";
- function = "uart0";
-@@ -388,6 +403,26 @@
- #size-cells = <0>;
- };
-
-+ emac: ethernet@1c30000 {
-+ compatible = "allwinner,sun50i-a64-emac";
-+ syscon = <&syscon>;
-+ reg = <0x01c30000 0x100>;
-+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+ resets = <&ccu RST_BUS_EMAC>;
-+ reset-names = "stmmaceth";
-+ clocks = <&ccu CLK_BUS_EMAC>;
-+ clock-names = "stmmaceth";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ mdio: mdio {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+ };
-+
- gic: interrupt-controller@1c81000 {
- compatible = "arm,gic-400";
- reg = <0x01c81000 0x1000>,
diff --git a/target/linux/sunxi/patches-4.9/0062-arm64-allwinner-pine64-Enable-dwmac-sun8i.patch b/target/linux/sunxi/patches-4.9/0062-arm64-allwinner-pine64-Enable-dwmac-sun8i.patch
deleted file mode 100644
index d9a825490d..0000000000
--- a/target/linux/sunxi/patches-4.9/0062-arm64-allwinner-pine64-Enable-dwmac-sun8i.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 97023943749367111b9a88e09d1b9bd157dd3326 Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe.montjoie@gmail.com>
-Date: Wed, 31 May 2017 09:18:47 +0200
-Subject: arm64: allwinner: pine64: Enable dwmac-sun8i
-
-The dwmac-sun8i hardware is present on the pine64
-It uses an external PHY via RMII.
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -70,6 +70,15 @@
- status = "okay";
- };
-
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rmii_pins>;
-+ phy-mode = "rmii";
-+ phy-handle = <&ext_rmii_phy1>;
-+ status = "okay";
-+
-+};
-+
- &i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-@@ -80,6 +89,13 @@
- bias-pull-up;
- };
-
-+&mdio {
-+ ext_rmii_phy1: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ };
-+};
-+
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
diff --git a/target/linux/sunxi/patches-4.9/0063-arm64-allwinner-pine64-plus-Enable-dwmac-sun8i.patch b/target/linux/sunxi/patches-4.9/0063-arm64-allwinner-pine64-plus-Enable-dwmac-sun8i.patch
deleted file mode 100644
index f89b842790..0000000000
--- a/target/linux/sunxi/patches-4.9/0063-arm64-allwinner-pine64-plus-Enable-dwmac-sun8i.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 94dcfdc77fc55ed1956011ceea341911c6e760a0 Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe.montjoie@gmail.com>
-Date: Wed, 31 May 2017 09:18:48 +0200
-Subject: arm64: allwinner: pine64-plus: Enable dwmac-sun8i
-
-The dwmac-sun8i hardware is present on the pine64 plus.
-It uses an external PHY rtl8211e via RGMII.
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- .../arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 17 ++++++++++++++++-
- 1 file changed, 16 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
-@@ -46,5 +46,20 @@
- model = "Pine64+";
- compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
-
-- /* TODO: Camera, Ethernet PHY, touchscreen, etc. */
-+ /* TODO: Camera, touchscreen, etc. */
-+};
-+
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rgmii_pins>;
-+ phy-mode = "rgmii";
-+ phy-handle = <&ext_rgmii_phy>;
-+ status = "okay";
-+};
-+
-+&mdio {
-+ ext_rgmii_phy: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ };
- };
diff --git a/target/linux/sunxi/patches-4.9/0064-arm64-allwinner-sun50i-a64-Correct-emac-register-siz.patch b/target/linux/sunxi/patches-4.9/0064-arm64-allwinner-sun50i-a64-Correct-emac-register-siz.patch
deleted file mode 100644
index 924c875288..0000000000
--- a/target/linux/sunxi/patches-4.9/0064-arm64-allwinner-sun50i-a64-Correct-emac-register-siz.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 3a4bae5fd44aa1cf49780dd25b3a89e6a39e8560 Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe.montjoie@gmail.com>
-Date: Mon, 10 Jul 2017 20:44:40 +0200
-Subject: arm64: allwinner: sun50i-a64: Correct emac register size
-
-The datasheet said that emac register size is 0x10000 not 0x100
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-[wens@csie.org: Fixed commit subject prefix]
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -406,7 +406,7 @@
- emac: ethernet@1c30000 {
- compatible = "allwinner,sun50i-a64-emac";
- syscon = <&syscon>;
-- reg = <0x01c30000 0x100>;
-+ reg = <0x01c30000 0x10000>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
diff --git a/target/linux/sunxi/patches-4.9/0065-arm64-allwinner-a64-pine64-add-missing-ethernet0-ali.patch b/target/linux/sunxi/patches-4.9/0065-arm64-allwinner-a64-pine64-add-missing-ethernet0-ali.patch
deleted file mode 100644
index f892219fa3..0000000000
--- a/target/linux/sunxi/patches-4.9/0065-arm64-allwinner-a64-pine64-add-missing-ethernet0-ali.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From dff751c68904cf587d918cfb6b2f5b0112f73bc9 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Sat, 22 Jul 2017 10:28:51 +0800
-Subject: arm64: allwinner: a64: pine64: add missing ethernet0 alias
-
-The EMAC Ethernet controller was enabled, but an accompanying alias
-was not added. This results in unstable numbering if other Ethernet
-devices, such as a USB dongle, are present. Also, the bootloader uses
-the alias to assign a generated stable MAC address to the device node.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Fixes: 970239437493 ("arm64: allwinner: pine64: Enable dwmac-sun8i")
-[wens@csie.org: Rewrite commit log as fixing a previous patch with Fixes]
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -51,6 +51,7 @@
- compatible = "pine64,pine64", "allwinner,sun50i-a64";
-
- aliases {
-+ ethernet0 = &emac;
- serial0 = &uart0;
- };
-
diff --git a/target/linux/sunxi/patches-4.9/0070-arm-sun8i-sunxi-h3-h5-Add-dt-node-for-the-syscon-con.patch b/target/linux/sunxi/patches-4.9/0070-arm-sun8i-sunxi-h3-h5-Add-dt-node-for-the-syscon-con.patch
deleted file mode 100644
index 88d431d319..0000000000
--- a/target/linux/sunxi/patches-4.9/0070-arm-sun8i-sunxi-h3-h5-Add-dt-node-for-the-syscon-con.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From d91d3daf5de90e0118227d8ddcb7bb4ff40c1b91 Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe.montjoie@gmail.com>
-Date: Wed, 31 May 2017 09:18:37 +0200
-Subject: arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
-
-This patch add the dt node for the syscon register present on the
-Allwinner H3/H5
-
-Only two register are present in this syscon and the only one useful is
-the one dedicated to EMAC clock..
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/sun8i-h3.dtsi
-+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
-@@ -140,6 +140,12 @@
- #size-cells = <1>;
- ranges;
-
-+ syscon: syscon@1c00000 {
-+ compatible = "allwinner,sun8i-h3-system-controller",
-+ "syscon";
-+ reg = <0x01c00000 0x1000>;
-+ };
-+
- dma: dma-controller@01c02000 {
- compatible = "allwinner,sun8i-h3-dma";
- reg = <0x01c02000 0x1000>;
diff --git a/target/linux/sunxi/patches-4.9/0071-arm-sun8i-sunxi-h3-h5-add-dwmac-sun8i-ethernet-drive.patch b/target/linux/sunxi/patches-4.9/0071-arm-sun8i-sunxi-h3-h5-add-dwmac-sun8i-ethernet-drive.patch
deleted file mode 100644
index 7054e3dc0f..0000000000
--- a/target/linux/sunxi/patches-4.9/0071-arm-sun8i-sunxi-h3-h5-add-dwmac-sun8i-ethernet-drive.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 0eba511a3cac29d6338b22b5b727f40cf8d163df Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe.montjoie@gmail.com>
-Date: Wed, 31 May 2017 09:18:38 +0200
-Subject: arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
-
-The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000
-speed.
-
-This patch enable the dwmac-sun8i on Allwinner H3/H5 SoC Device-tree.
-SoC H3/H5 have an internal PHY, so optionals syscon and ephy are set.
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 34 ++++++++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/arm/boot/dts/sun8i-h3.dtsi
-+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
-@@ -333,6 +333,14 @@
- interrupt-controller;
- #interrupt-cells = <3>;
-
-+ emac_rgmii_pins: emac0 {
-+ pins = "PD0", "PD1", "PD2", "PD3", "PD4",
-+ "PD5", "PD7", "PD8", "PD9", "PD10",
-+ "PD12", "PD13", "PD15", "PD16", "PD17";
-+ function = "emac";
-+ drive-strength = <40>;
-+ };
-+
- i2c0_pins: i2c0 {
- allwinner,pins = "PA11", "PA12";
- allwinner,function = "i2c0";
-@@ -431,6 +439,32 @@
- clocks = <&osc24M>;
- };
-
-+ emac: ethernet@1c30000 {
-+ compatible = "allwinner,sun8i-h3-emac";
-+ syscon = <&syscon>;
-+ reg = <0x01c30000 0x104>;
-+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+ resets = <&ccu RST_BUS_EMAC>;
-+ reset-names = "stmmaceth";
-+ clocks = <&ccu CLK_BUS_EMAC>;
-+ clock-names = "stmmaceth";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+
-+ mdio: mdio {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ int_mii_phy: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ clocks = <&ccu CLK_BUS_EPHY>;
-+ resets = <&ccu RST_BUS_EPHY>;
-+ };
-+ };
-+ };
-+
- wdt0: watchdog@01c20ca0 {
- compatible = "allwinner,sun6i-a31-wdt";
- reg = <0x01c20ca0 0x20>;
diff --git a/target/linux/sunxi/patches-4.9/0072-arm-sun8i-orangepi-2-Enable-dwmac-sun8i.patch b/target/linux/sunxi/patches-4.9/0072-arm-sun8i-orangepi-2-Enable-dwmac-sun8i.patch
deleted file mode 100644
index 450d5bc2be..0000000000
--- a/target/linux/sunxi/patches-4.9/0072-arm-sun8i-orangepi-2-Enable-dwmac-sun8i.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From a9992f2dd1890112643a93d621ff5a4c97c55d53 Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe.montjoie@gmail.com>
-Date: Wed, 31 May 2017 09:18:42 +0200
-Subject: arm: sun8i: orangepi-2: Enable dwmac-sun8i
-
-The dwmac-sun8i hardware is present on the Orange PI 2.
-It uses the internal PHY.
-
-This patch create the needed emac node.
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
-@@ -55,6 +55,7 @@
- aliases {
- serial0 = &uart0;
- /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
-+ ethernet0 = &emac;
- ethernet1 = &rtl8189;
- };
-
-@@ -109,6 +110,13 @@
- status = "okay";
- };
-
-+&emac {
-+ phy-handle = <&int_mii_phy>;
-+ phy-mode = "mii";
-+ allwinner,leds-active-low;
-+ status = "okay";
-+};
-+
- &ir {
- pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
diff --git a/target/linux/sunxi/patches-4.9/0073-ARM-sun8i-orangepi-plus-Enable-dwmac-sun8i.patch b/target/linux/sunxi/patches-4.9/0073-ARM-sun8i-orangepi-plus-Enable-dwmac-sun8i.patch
deleted file mode 100644
index 375d119d55..0000000000
--- a/target/linux/sunxi/patches-4.9/0073-ARM-sun8i-orangepi-plus-Enable-dwmac-sun8i.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 1dcd0095019aca7533eaeed9475d995a4eb30137 Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe.montjoie@gmail.com>
-Date: Mon, 5 Jun 2017 21:21:26 +0200
-Subject: ARM: sun8i: orangepi-plus: Enable dwmac-sun8i
-
-The dwmac-sun8i hardware is present on the Orange PI plus.
-It uses an external PHY rtl8211e via RGMII.
-
-This patch create the needed regulator, emac and phy nodes.
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 32 ++++++++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
-
---- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
-@@ -47,6 +47,20 @@
- model = "Xunlong Orange Pi Plus / Plus 2";
- compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
-
-+ aliases {
-+ ethernet0 = &emac;
-+ };
-+
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <100000>;
-+ enable-active-high;
-+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+ };
-+
- reg_usb3_vbus: usb3-vbus {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
-@@ -64,6 +78,24 @@
- status = "okay";
- };
-
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emac_rgmii_pins>;
-+ phy-supply = <&reg_gmac_3v3>;
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-mode = "rgmii";
-+
-+ allwinner,leds-active-low;
-+ status = "okay";
-+};
-+
-+&mdio {
-+ ext_rgmii_phy: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <0>;
-+ };
-+};
-+
- &mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_pins>;
diff --git a/target/linux/sunxi/patches-4.9/0074-ARM-dts-sunxi-h3-h5-Correct-emac-register-size.patch b/target/linux/sunxi/patches-4.9/0074-ARM-dts-sunxi-h3-h5-Correct-emac-register-size.patch
deleted file mode 100644
index 50877a5301..0000000000
--- a/target/linux/sunxi/patches-4.9/0074-ARM-dts-sunxi-h3-h5-Correct-emac-register-size.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 072b6e3692532b6281bf781ded1c7a986ac17471 Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe.montjoie@gmail.com>
-Date: Thu, 6 Jul 2017 10:53:34 +0200
-Subject: ARM: dts: sunxi: h3/h5: Correct emac register size
-
-The datasheet said that emac register size is 0x10000 not 0x104
-
-Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-[wens@csie.org: Fixed commit subject prefix]
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/sun8i-h3.dtsi
-+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
-@@ -442,7 +442,7 @@
- emac: ethernet@1c30000 {
- compatible = "allwinner,sun8i-h3-emac";
- syscon = <&syscon>;
-- reg = <0x01c30000 0x104>;
-+ reg = <0x01c30000 0x10000>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
diff --git a/target/linux/sunxi/patches-4.9/0080-ARM-dts-sunxi-nanopi-neo-Enable-dwmac-sun8i.patch b/target/linux/sunxi/patches-4.9/0080-ARM-dts-sunxi-nanopi-neo-Enable-dwmac-sun8i.patch
deleted file mode 100644
index 4de2fd2e85..0000000000
--- a/target/linux/sunxi/patches-4.9/0080-ARM-dts-sunxi-nanopi-neo-Enable-dwmac-sun8i.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
-@@ -53,6 +53,7 @@
-
- aliases {
- serial0 = &uart0;
-+ ethernet0 = &emac;
- };
-
- chosen {
-@@ -81,6 +82,13 @@
- status = "okay";
- };
-
-+&emac {
-+ phy-handle = <&int_mii_phy>;
-+ phy-mode = "mii";
-+ allwinner,leds-active-low;
-+ status = "okay";
-+};
-+
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/target/linux/sunxi/patches-4.9/0081-ARM-dts-sun8i-nanopi-neo-enable-UART-USB-and-I2C-pin.patch b/target/linux/sunxi/patches-4.9/0081-ARM-dts-sun8i-nanopi-neo-enable-UART-USB-and-I2C-pin.patch
deleted file mode 100644
index b815f7263b..0000000000
--- a/target/linux/sunxi/patches-4.9/0081-ARM-dts-sun8i-nanopi-neo-enable-UART-USB-and-I2C-pin.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From e036def69972b9db9d2695f45cbf4e84c707b3c5 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 23 Dec 2016 07:28:51 +0100
-Subject: [PATCH] ARM: dts: sun8i: nanopi-neo: enable UART, USB and I2C pins
-
----
- arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 43 ++++++++++++++++++++++++++++---
- 1 file changed, 40 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
-@@ -78,10 +78,30 @@
- };
- };
-
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&ehci2 {
-+ status = "okay";
-+};
-+
-+&ohci2 {
-+ status = "okay";
-+};
-+
- &ehci3 {
- status = "okay";
- };
-
-+&ohci3 {
-+ status = "okay";
-+};
-+
- &emac {
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
-@@ -99,9 +119,6 @@
- status = "okay";
- };
-
--&ohci3 {
-- status = "okay";
--};
-
- &pio {
- leds_opc: led-pins {
-@@ -127,7 +144,27 @@
- status = "okay";
- };
-
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_pins>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins>;
-+ status = "okay";
-+};
-+
- &usbphy {
- /* USB VBUS is always on */
- status = "okay";
- };
-+
-+&i2c0 {
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ status = "okay";
-+};
diff --git a/target/linux/sunxi/patches-4.9/090-sunxi-mmc-from-4-13.patch b/target/linux/sunxi/patches-4.9/090-sunxi-mmc-from-4-13.patch
deleted file mode 100644
index e64581ff83..0000000000
--- a/target/linux/sunxi/patches-4.9/090-sunxi-mmc-from-4-13.patch
+++ /dev/null
@@ -1,288 +0,0 @@
---- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
-+++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
-@@ -13,6 +13,7 @@ Required properties:
- * "allwinner,sun5i-a13-mmc"
- * "allwinner,sun7i-a20-mmc"
- * "allwinner,sun9i-a80-mmc"
-+ * "allwinner,sun50i-a64-emmc"
- * "allwinner,sun50i-a64-mmc"
- - reg : mmc controller base registers
- - clocks : a list with 4 phandle + clock specifier pairs
---- a/drivers/mmc/host/sunxi-mmc.c
-+++ b/drivers/mmc/host/sunxi-mmc.c
-@@ -5,6 +5,7 @@
- * (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch>
- * (C) Copyright 2013-2014 David Lanzend�rfer <david.lanzendoerfer@o2s.ch>
- * (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com>
-+ * (C) Copyright 2017 Sootech SA
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
-@@ -101,6 +102,7 @@
- (SDXC_SOFT_RESET | SDXC_FIFO_RESET | SDXC_DMA_RESET)
-
- /* clock control bits */
-+#define SDXC_MASK_DATA0 BIT(31)
- #define SDXC_CARD_CLOCK_ON BIT(16)
- #define SDXC_LOW_POWER_ON BIT(17)
-
-@@ -253,6 +255,11 @@ struct sunxi_mmc_cfg {
-
- /* does the IP block support autocalibration? */
- bool can_calibrate;
-+
-+ /* Does DATA0 needs to be masked while the clock is updated */
-+ bool mask_data0;
-+
-+ bool needs_new_timings;
- };
-
- struct sunxi_mmc_host {
-@@ -482,7 +489,7 @@ static void sunxi_mmc_dump_errinfo(struc
- cmd->opcode == SD_IO_RW_DIRECT))
- return;
-
-- dev_err(mmc_dev(host->mmc),
-+ dev_dbg(mmc_dev(host->mmc),
- "smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n",
- host->mmc->index, cmd->opcode,
- data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "",
-@@ -654,11 +661,16 @@ static int sunxi_mmc_oclk_onoff(struct s
- unsigned long expire = jiffies + msecs_to_jiffies(750);
- u32 rval;
-
-+ dev_dbg(mmc_dev(host->mmc), "%sabling the clock\n",
-+ oclk_en ? "en" : "dis");
-+
- rval = mmc_readl(host, REG_CLKCR);
-- rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON);
-+ rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON | SDXC_MASK_DATA0);
-
- if (oclk_en)
- rval |= SDXC_CARD_CLOCK_ON;
-+ if (host->cfg->mask_data0)
-+ rval |= SDXC_MASK_DATA0;
-
- mmc_writel(host, REG_CLKCR, rval);
-
-@@ -678,46 +690,29 @@ static int sunxi_mmc_oclk_onoff(struct s
- return -EIO;
- }
-
-+ if (host->cfg->mask_data0) {
-+ rval = mmc_readl(host, REG_CLKCR);
-+ mmc_writel(host, REG_CLKCR, rval & ~SDXC_MASK_DATA0);
-+ }
-+
- return 0;
- }
-
- static int sunxi_mmc_calibrate(struct sunxi_mmc_host *host, int reg_off)
- {
-- u32 reg = readl(host->reg_base + reg_off);
-- u32 delay;
-- unsigned long timeout;
--
- if (!host->cfg->can_calibrate)
- return 0;
-
-- reg &= ~(SDXC_CAL_DL_MASK << SDXC_CAL_DL_SW_SHIFT);
-- reg &= ~SDXC_CAL_DL_SW_EN;
--
-- writel(reg | SDXC_CAL_START, host->reg_base + reg_off);
--
-- dev_dbg(mmc_dev(host->mmc), "calibration started\n");
--
-- timeout = jiffies + HZ * SDXC_CAL_TIMEOUT;
--
-- while (!((reg = readl(host->reg_base + reg_off)) & SDXC_CAL_DONE)) {
-- if (time_before(jiffies, timeout))
-- cpu_relax();
-- else {
-- reg &= ~SDXC_CAL_START;
-- writel(reg, host->reg_base + reg_off);
--
-- return -ETIMEDOUT;
-- }
-- }
--
-- delay = (reg >> SDXC_CAL_DL_SHIFT) & SDXC_CAL_DL_MASK;
--
-- reg &= ~SDXC_CAL_START;
-- reg |= (delay << SDXC_CAL_DL_SW_SHIFT) | SDXC_CAL_DL_SW_EN;
--
-- writel(reg, host->reg_base + reg_off);
--
-- dev_dbg(mmc_dev(host->mmc), "calibration ended, reg is 0x%x\n", reg);
-+ /*
-+ * FIXME:
-+ * This is not clear how the calibration is supposed to work
-+ * yet. The best rate have been obtained by simply setting the
-+ * delay to 0, as Allwinner does in its BSP.
-+ *
-+ * The only mode that doesn't have such a delay is HS400, that
-+ * is in itself a TODO.
-+ */
-+ writel(SDXC_CAL_DL_SW_EN, host->reg_base + reg_off);
-
- return 0;
- }
-@@ -745,6 +740,7 @@ static int sunxi_mmc_clk_set_phase(struc
- index = SDXC_CLK_50M_DDR;
- }
- } else {
-+ dev_dbg(mmc_dev(host->mmc), "Invalid clock... returning\n");
- return -EINVAL;
- }
-
-@@ -757,10 +753,21 @@ static int sunxi_mmc_clk_set_phase(struc
- static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
- struct mmc_ios *ios)
- {
-+ struct mmc_host *mmc = host->mmc;
- long rate;
- u32 rval, clock = ios->clock;
- int ret;
-
-+ ret = sunxi_mmc_oclk_onoff(host, 0);
-+ if (ret)
-+ return ret;
-+
-+ /* Our clock is gated now */
-+ mmc->actual_clock = 0;
-+
-+ if (!ios->clock)
-+ return 0;
-+
- /* 8 bit DDR requires a higher module clock */
- if (ios->timing == MMC_TIMING_MMC_DDR52 &&
- ios->bus_width == MMC_BUS_WIDTH_8)
-@@ -768,25 +775,21 @@ static int sunxi_mmc_clk_set_rate(struct
-
- rate = clk_round_rate(host->clk_mmc, clock);
- if (rate < 0) {
-- dev_err(mmc_dev(host->mmc), "error rounding clk to %d: %ld\n",
-+ dev_err(mmc_dev(mmc), "error rounding clk to %d: %ld\n",
- clock, rate);
- return rate;
- }
-- dev_dbg(mmc_dev(host->mmc), "setting clk to %d, rounded %ld\n",
-+ dev_dbg(mmc_dev(mmc), "setting clk to %d, rounded %ld\n",
- clock, rate);
-
- /* setting clock rate */
- ret = clk_set_rate(host->clk_mmc, rate);
- if (ret) {
-- dev_err(mmc_dev(host->mmc), "error setting clk to %ld: %d\n",
-+ dev_err(mmc_dev(mmc), "error setting clk to %ld: %d\n",
- rate, ret);
- return ret;
- }
-
-- ret = sunxi_mmc_oclk_onoff(host, 0);
-- if (ret)
-- return ret;
--
- /* clear internal divider */
- rval = mmc_readl(host, REG_CLKCR);
- rval &= ~0xff;
-@@ -798,6 +801,13 @@ static int sunxi_mmc_clk_set_rate(struct
- }
- mmc_writel(host, REG_CLKCR, rval);
-
-+ if (host->cfg->needs_new_timings) {
-+ /* Don't touch the delay bits */
-+ rval = mmc_readl(host, REG_SD_NTSR);
-+ rval |= SDXC_2X_TIMING_MODE;
-+ mmc_writel(host, REG_SD_NTSR, rval);
-+ }
-+
- ret = sunxi_mmc_clk_set_phase(host, ios, rate);
- if (ret)
- return ret;
-@@ -806,9 +816,22 @@ static int sunxi_mmc_clk_set_rate(struct
- if (ret)
- return ret;
-
-- /* TODO: enable calibrate on sdc2 SDXC_REG_DS_DL_REG of A64 */
-+ /*
-+ * FIXME:
-+ *
-+ * In HS400 we'll also need to calibrate the data strobe
-+ * signal. This should only happen on the MMC2 controller (at
-+ * least on the A64).
-+ */
-+
-+ ret = sunxi_mmc_oclk_onoff(host, 1);
-+ if (ret)
-+ return ret;
-
-- return sunxi_mmc_oclk_onoff(host, 1);
-+ /* And we just enabled our clock back */
-+ mmc->actual_clock = rate;
-+
-+ return 0;
- }
-
- static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-@@ -822,10 +845,13 @@ static void sunxi_mmc_set_ios(struct mmc
- break;
-
- case MMC_POWER_UP:
-- host->ferror = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
-- ios->vdd);
-- if (host->ferror)
-- return;
-+ if (!IS_ERR(mmc->supply.vmmc)) {
-+ host->ferror = mmc_regulator_set_ocr(mmc,
-+ mmc->supply.vmmc,
-+ ios->vdd);
-+ if (host->ferror)
-+ return;
-+ }
-
- if (!IS_ERR(mmc->supply.vqmmc)) {
- host->ferror = regulator_enable(mmc->supply.vqmmc);
-@@ -847,7 +873,9 @@ static void sunxi_mmc_set_ios(struct mmc
- case MMC_POWER_OFF:
- dev_dbg(mmc_dev(mmc), "power off!\n");
- sunxi_mmc_reset_host(host);
-- mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
-+ if (!IS_ERR(mmc->supply.vmmc))
-+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
-+
- if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled)
- regulator_disable(mmc->supply.vqmmc);
- host->vqmmc_enabled = false;
-@@ -877,7 +905,7 @@ static void sunxi_mmc_set_ios(struct mmc
- mmc_writel(host, REG_GCTRL, rval);
-
- /* set up clock */
-- if (ios->clock && ios->power_mode) {
-+ if (ios->power_mode) {
- host->ferror = sunxi_mmc_clk_set_rate(host, ios);
- /* Android code had a usleep_range(50000, 55000); here */
- }
-@@ -1084,6 +1112,14 @@ static const struct sunxi_mmc_cfg sun50i
- .idma_des_size_bits = 16,
- .clk_delays = NULL,
- .can_calibrate = true,
-+ .mask_data0 = true,
-+ .needs_new_timings = true,
-+};
-+
-+static const struct sunxi_mmc_cfg sun50i_a64_emmc_cfg = {
-+ .idma_des_size_bits = 13,
-+ .clk_delays = NULL,
-+ .can_calibrate = true,
- };
-
- static const struct of_device_id sunxi_mmc_of_match[] = {
-@@ -1092,6 +1128,7 @@ static const struct of_device_id sunxi_m
- { .compatible = "allwinner,sun7i-a20-mmc", .data = &sun7i_a20_cfg },
- { .compatible = "allwinner,sun9i-a80-mmc", .data = &sun9i_a80_cfg },
- { .compatible = "allwinner,sun50i-a64-mmc", .data = &sun50i_a64_cfg },
-+ { .compatible = "allwinner,sun50i-a64-emmc", .data = &sun50i_a64_emmc_cfg },
- { /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);
diff --git a/target/linux/sunxi/patches-4.9/115-musb-ignore-vbus-errors.patch b/target/linux/sunxi/patches-4.9/115-musb-ignore-vbus-errors.patch
deleted file mode 100644
index 460aec078c..0000000000
--- a/target/linux/sunxi/patches-4.9/115-musb-ignore-vbus-errors.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From fce20ac5d8c98f1a8ea5298051d9fa669e455f04 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 4 Aug 2015 23:22:45 +0200
-Subject: [PATCH] musb: sunxi: Ignore VBus errors in host-only mode
-
-For some unclear reason sometimes we get VBus errors in host-only mode,
-even though we do not have any vbus-detection then. Ignore these.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/usb/musb/sunxi.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/usb/musb/sunxi.c
-+++ b/drivers/usb/musb/sunxi.c
-@@ -202,6 +202,10 @@ static irqreturn_t sunxi_musb_interrupt(
- musb_writeb(musb->mregs, MUSB_FADDR, 0);
- }
-
-+ /* Ignore Vbus errors when in host only mode */
-+ if (musb->port_mode == MUSB_PORT_MODE_HOST)
-+ musb->int_usb &= ~MUSB_INTR_VBUSERROR;
-+
- musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX);
- if (musb->int_tx)
- writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX);
diff --git a/target/linux/sunxi/patches-4.9/131-reset-add-h3-resets.patch b/target/linux/sunxi/patches-4.9/131-reset-add-h3-resets.patch
deleted file mode 100644
index dee01dc020..0000000000
--- a/target/linux/sunxi/patches-4.9/131-reset-add-h3-resets.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 5f0bb9d0bc545ef53a83f7bd176fdc0736eed8e5 Mon Sep 17 00:00:00 2001
-From: Jens Kuske <jenskuske@gmail.com>
-Date: Tue, 27 Oct 2015 17:50:24 +0100
-Subject: [PATCH] reset: sunxi: Add Allwinner H3 bus resets
-
-The H3 bus resets have some holes between the registers, so we add
-an of_xlate() function to skip them according to the datasheet.
-
-Signed-off-by: Jens Kuske <jenskuske@gmail.com>
----
- .../bindings/reset/allwinner,sunxi-clock-reset.txt | 1 +
- drivers/reset/reset-sunxi.c | 30 +++++++++++++++++++---
- 2 files changed, 28 insertions(+), 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
-+++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
-@@ -8,6 +8,7 @@ Required properties:
- - compatible: Should be one of the following:
- "allwinner,sun6i-a31-ahb1-reset"
- "allwinner,sun6i-a31-clock-reset"
-+ "allwinner,sun8i-h3-bus-reset"
- - reg: should be register base and length as documented in the
- datasheet
- - #reset-cells: 1, see below
---- a/drivers/reset/reset-sunxi.c
-+++ b/drivers/reset/reset-sunxi.c
-@@ -75,7 +75,9 @@ static const struct reset_control_ops su
- .deassert = sunxi_reset_deassert,
- };
-
--static int sunxi_reset_init(struct device_node *np)
-+static int sunxi_reset_init(struct device_node *np,
-+ int (*of_xlate)(struct reset_controller_dev *rcdev,
-+ const struct of_phandle_args *reset_spec))
- {
- struct sunxi_reset_data *data;
- struct resource res;
-@@ -108,6 +110,7 @@ static int sunxi_reset_init(struct devic
- data->rcdev.nr_resets = size * 32;
- data->rcdev.ops = &sunxi_reset_ops;
- data->rcdev.of_node = np;
-+ data->rcdev.of_xlate = of_xlate;
-
- return reset_controller_register(&data->rcdev);
-
-@@ -116,6 +119,21 @@ err_alloc:
- return ret;
- };
-
-+static int sun8i_h3_bus_reset_xlate(struct reset_controller_dev *rcdev,
-+ const struct of_phandle_args *reset_spec)
-+{
-+ unsigned int index = reset_spec->args[0];
-+
-+ if (index < 96)
-+ return index;
-+ else if (index < 128)
-+ return index + 32;
-+ else if (index < 160)
-+ return index + 64;
-+ else
-+ return -EINVAL;
-+}
-+
- /*
- * These are the reset controller we need to initialize early on in
- * our system, before we can even think of using a regular device
-@@ -123,15 +141,21 @@ err_alloc:
- */
- static const struct of_device_id sunxi_early_reset_dt_ids[] __initconst = {
- { .compatible = "allwinner,sun6i-a31-ahb1-reset", },
-+ { .compatible = "allwinner,sun8i-h3-bus-reset", .data = sun8i_h3_bus_reset_xlate, },
- { /* sentinel */ },
- };
-
- void __init sun6i_reset_init(void)
- {
- struct device_node *np;
--
-- for_each_matching_node(np, sunxi_early_reset_dt_ids)
-- sunxi_reset_init(np);
-+ const struct of_device_id *match;
-+ int (*of_xlate)(struct reset_controller_dev *rcdev,
-+ const struct of_phandle_args *reset_spec);
-+
-+ for_each_matching_node_and_match(np, sunxi_early_reset_dt_ids, &match) {
-+ of_xlate = match->data;
-+ sunxi_reset_init(np, of_xlate);
-+ }
- }
-
- /*
diff --git a/target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch b/target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch
deleted file mode 100644
index 7e92a565fa..0000000000
--- a/target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-From daf75255fb67bf44db178e4c95a803b7972ed670 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 26 Sep 2017 22:29:06 +0200
-Subject: ARM: dts: sunxi: add support for Orange Pi R1 board
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 171 ++++++++++++++++++++++++
- 2 files changed, 172 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -819,6 +819,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- sun8i-a33-sinlinx-sina33.dtb \
- sun8i-a83t-allwinner-h8homlet-v2.dtb \
- sun8i-a83t-cubietruck-plus.dtb \
-+ sun8i-h2-plus-orangepi-r1.dtb \
- sun8i-h3-bananapi-m2-plus.dtb \
- sun8i-h3-nanopi-neo.dtb \
- sun8i-h3-orangepi-2.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
-@@ -0,0 +1,171 @@
-+/*
-+ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Based on sun8i-h2-plus-orangepi-zero.dts, which is:
-+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
-+ *
-+ * Based on sun8i-h3-orangepi-one.dts, which is:
-+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun8i-h3.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ model = "Xunlong Orange Pi R1";
-+ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
-+ ethernet0 = &emac;
-+ ethernet1 = &xr819;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ pwr_led {
-+ label = "orangepi:green:pwr";
-+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ };
-+
-+ status_led {
-+ label = "orangepi:red:status";
-+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ reg_vcc_wifi: reg_vcc_wifi {
-+ compatible = "regulator-fixed";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-wifi";
-+ enable-active-high;
-+ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wifi_pwrseq: wifi_pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
-+ post-power-on-delay-ms = <200>;
-+ };
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&emac {
-+ phy-handle = <&int_mii_phy>;
-+ phy-mode = "mii";
-+ allwinner,leds-active-low;
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ vmmc-supply = <&reg_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&mmc1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc1_pins_a>;
-+ vmmc-supply = <&reg_vcc_wifi>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+
-+ /*
-+ * Explicitly define the sdio device, so that we can add an ethernet
-+ * alias for it (which e.g. makes u-boot set a mac-address).
-+ */
-+ xr819: sdio_wifi@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&mmc1_pins_a {
-+ bias-pull-up;
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_pins>;
-+ status = "disabled";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins>;
-+ status = "disabled";
-+};
-+
-+&usbphy {
-+ /* USB VBUS is always on */
-+ status = "okay";
-+};
diff --git a/target/linux/sunxi/patches-4.9/205-arm-dts-sun8i-add-support-for-nanopi-m1-plus-board.patch b/target/linux/sunxi/patches-4.9/205-arm-dts-sun8i-add-support-for-nanopi-m1-plus-board.patch
deleted file mode 100644
index d0ee8edd14..0000000000
--- a/target/linux/sunxi/patches-4.9/205-arm-dts-sun8i-add-support-for-nanopi-m1-plus-board.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From 2ed2388bc0c5b7d04c7b079d673ce61a0333c818 Mon Sep 17 00:00:00 2001
-From: Jagan Teki <jagan@amarulasolutions.com>
-Date: Tue, 30 May 2017 17:42:50 +0000
-Subject: ARM: dts: sun8i: h3: Add initial NanoPi M1 Plus support
-
-Backported support from kernel 4.13 with the following changes:
-- Added WiFi node
-- Added Ethernet node
-- Added eMMC node
-
-Original commit message:
-NanoPi M1 Plus is designed and developed by FriendlyElec
-for professionals, enterprise users, makers and hobbyists
-using the Allwinner H3 SOC.
-
-NanoPi M1 Plus key features
-- Allwinner H3, Quad-core Cortex-A7@1.2GHz
-- 1GB DDR3 RAM
-- 8GB eMMC
-- microSD slot
-- 10/100/1000M Ethernet
-- Serial Debug Port
-- 5V 2A DC power-supply
-
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -821,6 +821,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- sun8i-a83t-cubietruck-plus.dtb \
- sun8i-h2-plus-orangepi-r1.dtb \
- sun8i-h3-bananapi-m2-plus.dtb \
-+ sun8i-h3-nanopi-m1-plus.dtb \
- sun8i-h3-nanopi-neo.dtb \
- sun8i-h3-orangepi-2.dtb \
- sun8i-h3-orangepi-lite.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
-@@ -0,0 +1,129 @@
-+/*
-+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+ model = "FriendlyArm NanoPi M1 Plus";
-+ compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
-+
-+ aliases {
-+ ethernet0 = &emac;
-+ };
-+
-+ pwrseq_wifi: pwrseq0 {
-+ compatible = "mmc-pwrseq-simple";
-+ pinctrl-names = "default";
-+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-+ };
-+
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <100000>;
-+ enable-active-high;
-+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
-+ };
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&ehci2 {
-+ status = "okay";
-+};
-+
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emac_rgmii_pins>;
-+ phy-supply = <&reg_gmac_3v3>;
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-mode = "rgmii";
-+ status = "okay";
-+};
-+
-+&mdio {
-+ ext_rgmii_phy: ethernet-phy@7 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <7>;
-+ };
-+};
-+
-+&mmc1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc1_pins_a>;
-+ vmmc-supply = <&reg_vcc3v3>;
-+ vqmmc-supply = <&reg_vcc3v3>;
-+ mmc-pwrseq = <&pwrseq_wifi>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+
-+ brcmf: wifi@1 {
-+ reg = <1>;
-+ compatible = "brcm,bcm4329-fmac";
-+ interrupt-parent = <&pio>;
-+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-+ interrupt-names = "host-wake";
-+ };
-+};
-+
-+&mmc2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc2_8bit_pins>;
-+ vmmc-supply = <&reg_vcc3v3>;
-+ vqmmc-supply = <&reg_vcc3v3>;
-+ bus-width = <8>;
-+ non-removable;
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&ohci2 {
-+ status = "okay";
-+};