205 files changed, 64276 insertions, 4325 deletions

diff --git a/target/linux/ramips/Makefile b/target/linux/ramips/Makefile
index 1214a02ab3..2ddf37da80 100644
--- a/target/linux/ramips/Makefile
+++ b/target/linux/ramips/Makefile
@@ -9,11 +9,11 @@ include $(TOPDIR)/rules.mk
 ARCH:=mipsel
 BOARD:=ramips
 BOARDNAME:=Ralink RT288x/RT3xxx
-SUBTARGETS:=rt288x rt305x rt3883
+SUBTARGETS:=rt288x rt305x rt3883 mt7620a
 CFLAGS:=-Os -pipe -fno-caller-saves -mno-branch-likely
 FEATURES:=squashfs gpio
 
-LINUX_VERSION:=3.8.13
+LINUX_VERSION:=3.9.6
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES+=\
diff --git a/target/linux/ramips/dts/DIR-645.dts b/target/linux/ramips/dts/DIR-645.dts
index e0b3752006..960d2cb352 100644
--- a/target/linux/ramips/dts/DIR-645.dts
+++ b/target/linux/ramips/dts/DIR-645.dts
@@ -72,7 +72,10 @@
 		status = "okay";
 
 		mtd-mac-address = <&factory 0x28>;
-		ralink,fixed-link = <1000 1 1 1>;
+		port@0 {
+			ralink,fixed-link = <1000 1 1 0>;
+		};
+
 	};
 
 	wmac@10180000 {
@@ -125,14 +128,16 @@
 		};
 	};
 
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
+	usb0: gpio-regulator {
+		compatible = "regulator-gpio";
 
-		usb {
-			gpio-export,name = "usb";
-			gpio-export,output = <1>;
-			gpios = <&gpio1 6 0>;
-		};
+		regulator-type = "voltage";
+		regulator-name = "usb-power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+
+		enable-active-high;
+		enable-gpio = <&gpio1 6 0>;
 	};
 };
diff --git a/target/linux/ramips/dts/F5D8235_V1.dts b/target/linux/ramips/dts/F5D8235_V1.dts
index 41a7f122c8..52b789b76c 100644
--- a/target/linux/ramips/dts/F5D8235_V1.dts
+++ b/target/linux/ramips/dts/F5D8235_V1.dts
@@ -54,7 +54,9 @@
 	ethernet@400000 {
 		status = "okay";
 
-		ralink,fixed-link = <1000 1 1 1>;
+                port@0 {
+			ralink,fixed-link = <1000 1 1 1>;
+		};
 	};
 
 	wmac@480000 {
diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts
index a3cc8fc97d..442cd268dd 100644
--- a/target/linux/ramips/dts/FREESTATION5.dts
+++ b/target/linux/ramips/dts/FREESTATION5.dts
@@ -72,15 +72,16 @@
 		status = "okay";
 	};
 
-	gpio-export {
-		compatible = "gpio-export";
+	poe: gpio-regulator {
 		// Used to enable power-over-ethernet passthrough from port0 to port1.
 		// Disable passthrough by default to prevent accidental equipment damage.
-		poe {
-			gpio-export,name = "poe-passthrough";
-			gpio-export,output = <1>; // OUT_INIT_HIGH
-			gpios = <&gpio0 11 1>;    // GPIO 11, ACTIVE_LOW
-		};
+		compatible = "regulator-gpio";
+
+		regulator-name = "poe-power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		enable-gpio = <&gpio0 12 0>;
 	};
 
 	gpio-leds {
diff --git a/target/linux/ramips/dts/MPRA2.dts b/target/linux/ramips/dts/MPRA2.dts
index 8fb226b748..9f8edb6296 100644
--- a/target/linux/ramips/dts/MPRA2.dts
+++ b/target/linux/ramips/dts/MPRA2.dts
@@ -103,19 +103,27 @@
 		};
 	};
 
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
+	usb0: gpio-regulator {
+		compatible = "regulator-gpio";
 
-		usb {
-			gpio-export,name = "usb";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 7 0>;
-		};
-		root_hub {
-			gpio-export,name = "root_hub";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 12 0>;
-		};
+		regulator-name = "usb0-power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+
+		enable-active-high;
+		enable-gpio = <&gpio0 7 0>;
+	};
+
+	hub0: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "hub0-power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+
+		enable-active-high;
+		enable-gpio = <&gpio0 12 0>;
 	};
 };
diff --git a/target/linux/ramips/dts/MT7620a.dts b/target/linux/ramips/dts/MT7620a.dts
new file mode 100644
index 0000000000..773ac51fb6
--- /dev/null
+++ b/target/linux/ramips/dts/MT7620a.dts
@@ -0,0 +1,127 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
+	model = "Ralink MT7620a + MT7610e evaluation board";
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
+			ralink,gpiomux = "i2c", "jtag";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+		
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "en25q64";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "en25q64";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+		
+		port@4 {
+			compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
+			reg = <4>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+
+		port@5 {
+			compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
+			reg = <5>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+
+		mdio-bus {
+			status = "okay";
+
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+				phy-mode = "rgmii";
+			};
+
+			phy5: ethernet-phy@5 {
+				reg = <5>;
+				phy-mode = "rgmii";
+			};
+		};
+	};
+
+	gsw@10110000 {
+		status = "okay";
+		ralink,port4 = "gmac";
+	};
+
+	sdhci@10130000 {
+		status = "okay";
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		s2 {
+			label = "S2";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x100>;
+		};
+		s3 {
+			label = "S3";
+			gpios = <&gpio0 2 1>;
+			linux,code = <0x101>;
+		};
+	};
+};
diff --git a/target/linux/ramips/dts/OMNI-EMB-HPM.dts b/target/linux/ramips/dts/OMNI-EMB-HPM.dts
index 8148294893..875df14c66 100644
--- a/target/linux/ramips/dts/OMNI-EMB-HPM.dts
+++ b/target/linux/ramips/dts/OMNI-EMB-HPM.dts
@@ -131,19 +131,28 @@
 		};
 	};
 
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-		/* gpio 12 and 13 handle the OC input */
-		usb0 {
-			gpio-export,name = "usb0";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 2 0>;
-		};
-		usb1 {
-			gpio-export,name = "usb1";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 1 0>;
-		};
+	/* gpio 12 and 13 handle the OC input */
+	usb0: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "usb0-power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+
+		enable-active-high;
+		enable-gpio = <&gpio0 2 0>;
+	};
+
+	usb1: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "usb1-power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+
+		enable-active-high;
+		enable-gpio = <&gpio0 1 0>;
 	};
 };
diff --git a/target/linux/ramips/dts/RT-N15.dts b/target/linux/ramips/dts/RT-N15.dts
index 2ff266cfdd..8351449ea1 100644
--- a/target/linux/ramips/dts/RT-N15.dts
+++ b/target/linux/ramips/dts/RT-N15.dts
@@ -54,7 +54,9 @@
 	ethernet@400000 {
 		status = "okay";
 
-		ralink,fixed-link = <1000 1 1 1>;
+                port@0 {
+			ralink,fixed-link = <1000 1 1 1>;
+		};
 	};
 
 	wmac@480000 {
diff --git a/target/linux/ramips/dts/RTN56U.dts b/target/linux/ramips/dts/RTN56U.dts
index 0c09904f51..9c36af5721 100644
--- a/target/linux/ramips/dts/RTN56U.dts
+++ b/target/linux/ramips/dts/RTN56U.dts
@@ -31,7 +31,9 @@
 	ethernet@10100000 {
 		status = "okay";
 
-		ralink,fixed-link = <1000 1 1 1>;
+                port@0 {
+			ralink,fixed-link = <1000 1 1 1>;
+		};
 	};
 
 	pci@10140000 {
diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts
index eb2d4bc6af..002719583b 100644
--- a/target/linux/ramips/dts/TEW-691GR.dts
+++ b/target/linux/ramips/dts/TEW-691GR.dts
@@ -30,9 +30,10 @@
 
 	ethernet@10100000 {
 		status = "okay";
-		phy-handle = <&phy0>;
-		phy-mode = "rgmii";
-
+		port@0 {
+			phy-handle = <&phy0>;
+			phy-mode = "rgmii";
+		};
 		mdio-bus {
 			status = "okay";
 
diff --git a/target/linux/ramips/dts/TEW-692GR.dts b/target/linux/ramips/dts/TEW-692GR.dts
index f5d0d04845..eee4b2af2d 100644
--- a/target/linux/ramips/dts/TEW-692GR.dts
+++ b/target/linux/ramips/dts/TEW-692GR.dts
@@ -30,8 +30,17 @@
 
 	ethernet@10100000 {
 		status = "okay";
-		ralink,phy-mask = <0x1>;
-		phy-mode = "rgmii";
+		port@0 {
+			phy-handle = <&phy0>;
+			phy-mode = "rgmii";
+		};
+		mdio-bus {
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
 	};
 
 	pci@10140000 {
diff --git a/target/linux/ramips/dts/WLI-TX4-AG300N.dts b/target/linux/ramips/dts/WLI-TX4-AG300N.dts
index ff33a8a4dc..2296c3fc07 100644
--- a/target/linux/ramips/dts/WLI-TX4-AG300N.dts
+++ b/target/linux/ramips/dts/WLI-TX4-AG300N.dts
@@ -53,7 +53,9 @@
 	ethernet@400000 {
 		status = "okay";
 
-		ralink,fixed-link = <100 1 1 1>;
+                port@0 {
+			ralink,fixed-link = <1000 1 1 1>;
+		};
 	};
 
 	wmac@480000 {
diff --git a/target/linux/ramips/dts/WR6202.dts b/target/linux/ramips/dts/WR6202.dts
index a970849e31..1e41756d5a 100644
--- a/target/linux/ramips/dts/WR6202.dts
+++ b/target/linux/ramips/dts/WR6202.dts
@@ -102,14 +102,14 @@
 		status = "okay";
 	};
 
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
+	usb0: gpio-regulator {
+		compatible = "regulator-gpio";
 
-		usb {
-			gpio-export,name = "usb";
-			gpio-export,output = <0>;
-			gpios = <&gpio0 11 0>;
-		};
+		regulator-name = "usb0-power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+
+		enable-gpio = <&gpio0 11 0>;
 	};
 };
diff --git a/target/linux/ramips/dts/mt7620.dtsi b/target/linux/ramips/dts/mt7620.dtsi
deleted file mode 100644
index 9f913cd85a..0000000000
--- a/target/linux/ramips/dts/mt7620.dtsi
+++ /dev/null
@@ -1,140 +0,0 @@
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "ralink,mtk7620n-soc", "ralink,mt7620-soc";
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips24KEc";
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	cpuintc: cpuintc@0 {
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		compatible = "mti,cpu-interrupt-controller";
-	};
-
-	palmbus@10000000 {
-		compatible = "palmbus";
-		reg = <0x10000000 0x200000>;
-                ranges = <0x0 0x10000000 0x1FFFFF>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysc@0 {
-			compatible = "ralink,mt7620-sysc", "ralink,mt7620n-sysc";
-			reg = <0x0 0x100>;
-		};
-
-		timer@100 {
-			compatible = "ralink,mt7620-timer", "ralink,rt2880-timer";
-			reg = <0x100 0x20>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <1>;
-		};
-
-		watchdog@120 {
-			compatible = "ralink,mt7620-wdt", "ralink,rt2880-wdt";
-			reg = <0x120 0x10>;
-		};
-
-		intc: intc@200 {
-			compatible = "ralink,mt7620-intc", "ralink,rt2880-intc";
-			reg = <0x200 0x100>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>;
-		};
-
-		memc@300 {
-			compatible = "ralink,mt7620-memc", "ralink,rt3050-memc";
-			reg = <0x300 0x100>;
-		};
-
-		gpio0: gpio@600 {
-			compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
-			reg = <0x600 0x34>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			ralink,gpio-base = <0>;
-			ralink,num-gpios = <24>;
-			ralink,register-map = [ 00 04 08 0c
-						20 24 28 2c
-						30 34 ];
-		};
-
-		gpio1: gpio@638 {
-			compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
-			reg = <0x638 0x24>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			ralink,gpio-base = <24>;
-			ralink,num-gpios = <16>;
-			ralink,register-map = [ 00 04 08 0c
-						10 14 18 1c
-						20 24 ];
-		};
-
-		gpio2: gpio@660 {
-			compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
-			reg = <0x660 0x24>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			ralink,gpio-base = <40>;
-			ralink,num-gpios = <32>;
-			ralink,register-map = [ 00 04 08 0c
-						10 14 18 1c
-						20 24 ];
-		};
-
-		gpio3: gpio@688 {
-			compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
-			reg = <0x688 0x24>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			ralink,gpio-base = <72>;
-			ralink,num-gpios = <1>;
-			ralink,register-map = [ 00 04 08 0c
-						10 14 18 1c
-						20 24 ];
-		};
-
-		spi@b00 {
-			compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
-			reg = <0xb00 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			status = "disabled";
-		};
-
-		uartlite@c00 {
-			compatible = "ralink,mt7620-uart", "ralink,rt2880-uart", "ns16550a";
-			reg = <0xc00 0x100>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <12>;
-
-			reg-shift = <2>;
-		};
-	};
-};
diff --git a/target/linux/ramips/dts/mt7620a.dtsi b/target/linux/ramips/dts/mt7620a.dtsi
new file mode 100644
index 0000000000..104abfbfbf
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a.dtsi
@@ -0,0 +1,294 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,mtk7620a-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+		};
+	};
+
+	cpuintc: cpuintc@0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+                ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		timer@100 {
+			compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
+			reg = <0x100 0x20>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <1>;
+		};
+
+		watchdog@120 {
+			compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
+			reg = <0x120 0x10>;
+
+			resets = <&rstctrl 8>;
+			reset-names = "wdt";
+
+			interrupt-parent = <&intc>;
+			interrupts = <1>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			resets = <&rstctrl 19>;
+			reset-names = "intc";
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc@300 {
+			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+			reg = <0x300 0x100>;
+
+			resets = <&rstctrl 20>;
+			reset-names = "mc";
+
+			interrupt-parent = <&intc>;
+			interrupts = <3>;
+		};
+
+		uart@500 {
+			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0x500 0x100>;
+
+			resets = <&rstctrl 12>;
+			reset-names = "uart";
+
+			interrupt-parent = <&intc>;
+			interrupts = <5>;
+
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		gpio0: gpio@600 {
+			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+			reg = <0x600 0x34>;
+
+			resets = <&rstctrl 13>;
+			reset-names = "pio";
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ralink,gpio-base = <0>;
+			ralink,num-gpios = <24>;
+			ralink,register-map = [ 00 04 08 0c
+						20 24 28 2c
+						30 34 ];
+
+			status = "disabled";
+		};
+
+		gpio1: gpio@638 {
+			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+			reg = <0x638 0x24>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ralink,gpio-base = <24>;
+			ralink,num-gpios = <16>;
+			ralink,register-map = [ 00 04 08 0c
+						10 14 18 1c
+						20 24 ];
+
+			status = "disabled";
+		};
+
+		gpio2: gpio@660 {
+			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+			reg = <0x660 0x24>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ralink,gpio-base = <40>;
+			ralink,num-gpios = <32>;
+			ralink,register-map = [ 00 04 08 0c
+						10 14 18 1c
+						20 24 ];
+
+			status = "disabled";
+		};
+
+		i2c@900 {
+			compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
+			reg = <0x900 0x100>;
+
+			resets = <&rstctrl 16>;
+			reset-names = "i2c";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@b00 {
+			compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
+			reg = <0xb00 0x100>;
+
+			resets = <&rstctrl 18>;
+			reset-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+		};
+
+		uartlite@c00 {
+			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			resets = <&rstctrl 19>;
+			reset-names = "uartl";
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+
+			reg-shift = <2>;
+		};
+
+		systick@d00 {
+			compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
+			reg = <0xd00 0x10>;
+
+			resets = <&rstctrl 28>;
+			reset-names = "intc";
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <7>;
+		};
+
+		gdma@2800 {
+			compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
+			reg = <0x2800 0x800>;
+
+			resets = <&rstctrl 14>;
+			reset-names = "dma";
+
+			interrupt-parent = <&intc>;
+			interrupts = <7>;
+		};
+	};
+
+	rstctrl: rstctrl {
+		compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
+		#reset-cells = <1>;
+	};
+
+	ubsphy {
+		compatible = "ralink,mt7620a-usbphy";
+
+		resets = <&rstctrl 22 &rstctrl 25>;
+		reset-names = "host", "device";
+	};
+
+	ethernet@10100000 {
+		compatible = "ralink,mt7620a-eth";
+		reg = <0x10100000 10000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <5>;
+
+		status = "disabled";
+	
+		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+
+	gsw@10110000 {
+		compatible = "ralink,mt7620a-gsw";
+		reg = <0x10110000 8000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <17>;
+
+		status = "disabled";
+	};
+
+	sdhci@10130000 {
+		compatible = "ralink,mt7620a-sdhci";
+		reg = <0x10130000 4000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <14>;
+
+		status = "disabled";
+	};
+
+	ehci@101c0000 {
+		compatible = "ralink,rt3xxx-ehci";
+		reg = <0x101c0000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+
+	ohci@101c1000 {
+		compatible = "ralink,rt3xxx-ohci";
+		reg = <0x101c1000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+
+	pcie@10140000 {
+		compatible = "ralink,mt7620a-pci";
+		reg = <0x10140000 0x100
+			0x10142000 0x100>;
+
+		resets = <&rstctrl 26>;
+		reset-names = "pcie0";
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <4>;
+
+		status = "disabled";
+	};
+};
diff --git a/target/linux/ramips/dts/mt7620a_mt7610e_eval.dts b/target/linux/ramips/dts/mt7620a_mt7610e_eval.dts
new file mode 100644
index 0000000000..0d7755b324
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_mt7610e_eval.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
+	model = "Ralink MT7620A evaluation board";
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
+			ralink,gpiomux = "i2c", "jtag";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+		
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "en25q64";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "en25q64";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	gsw@10110000 {
+		status = "okay";
+		ralink,port4 = "ephy";
+	};
+
+	sdhci@10130000 {
+		status = "okay";
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		wps {
+			label = "wps";
+			gpios = <&gpio0 12 1>;
+			linux,code = <0x100>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 1>;
+			linux,code = <0x101>;
+		};
+	};
+};
diff --git a/target/linux/ramips/dts/rt2880.dtsi b/target/linux/ramips/dts/rt2880.dtsi
index 637409f355..b51314856d 100644
--- a/target/linux/ramips/dts/rt2880.dtsi
+++ b/target/linux/ramips/dts/rt2880.dtsi
@@ -13,10 +13,6 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	memorydetect {
-		ralink,memory = <0x8000000 0x200000 0x8000000>;
-	};
-
 	cpuintc: cpuintc@0 {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
diff --git a/target/linux/ramips/dts/rt3050.dtsi b/target/linux/ramips/dts/rt3050.dtsi
index 45d9238530..29cd536a51 100644
--- a/target/linux/ramips/dts/rt3050.dtsi
+++ b/target/linux/ramips/dts/rt3050.dtsi
@@ -13,10 +13,6 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x4000000>;
-	};
-
 	cpuintc: cpuintc@0 {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
@@ -48,12 +44,21 @@
 		watchdog@120 {
 			compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
 			reg = <0x120 0x10>;
+
+			resets = <&rstctrl 8>;
+			reset-names = "wdt";
+
+			interrupt-parent = <&intc>;
+			interrupts = <1>;
 		};
 
 		intc: intc@200 {
 			compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
 			reg = <0x200 0x100>;
 
+			resets = <&rstctrl 19>;
+			reset-names = "intc";
+
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
@@ -64,6 +69,27 @@
 		memc@300 {
 			compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
 			reg = <0x300 0x100>;
+
+			resets = <&rstctrl 20>;
+			reset-names = "mc";
+
+			interrupt-parent = <&intc>;
+			interrupts = <3>;
+		};
+
+		uart@500 {
+			compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0x500 0x100>;
+
+			resets = <&rstctrl 12>;
+			reset-names = "uart";
+
+			interrupt-parent = <&intc>;
+			interrupts = <5>;
+
+			reg-shift = <2>;
+
+			status = "disabled";
 		};
 
 		gpio0: gpio@600 {
@@ -79,6 +105,12 @@
 						20 24 28 2c
 						30 34 ];
 
+			resets = <&rstctrl 13>;
+			reset-names = "pio";
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
 			status = "disabled";
 		};
 
@@ -117,6 +149,10 @@
 		spi@b00 {
 			compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
 			reg = <0xb00 0x100>;
+			
+			resets = <&rstctrl 18>;
+			reset-names = "spi";
+
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -126,6 +162,9 @@
 		uartlite@c00 {
 			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
+ 
+			resets = <&rstctrl 19>;
+			reset-names = "uartl";
 
 			interrupt-parent = <&intc>;
 			interrupts = <12>;
@@ -135,6 +174,11 @@
 
 	};
 
+	rstctrl: rstctrl {
+		compatible = "ralink,rt3050-reset", "ralink,rt2880-reset";
+		#reset-cells = <1>;
+	};
+
 	ethernet@10100000 {
 		compatible = "ralink,rt3050-eth";
 		reg = <0x10100000 10000>;
diff --git a/target/linux/ramips/dts/rt3352.dtsi b/target/linux/ramips/dts/rt3352.dtsi
index 9c7c268b88..e4d35d87c2 100644
--- a/target/linux/ramips/dts/rt3352.dtsi
+++ b/target/linux/ramips/dts/rt3352.dtsi
@@ -13,10 +13,6 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x10000000>;
-	};
-
 	cpuintc: cpuintc@0 {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
@@ -48,6 +44,12 @@
 		watchdog@120 {
 			compatible = "ralink,rt3352-wdt", "ralink,rt2880-wdt";
 			reg = <0x120 0x10>;
+
+			resets = <&rstctrl 8>;
+			reset-names = "wdt";
+
+			interrupt-parent = <&intc>;
+			interrupts = <1>;
 		};
 
 		intc: intc@200 {
@@ -64,6 +66,27 @@
 		memc@300 {
 			compatible = "ralink,rt3352-memc", "ralink,rt3050-memc";
 			reg = <0x300 0x100>;
+
+			resets = <&rstctrl 20>;
+			reset-names = "mc";
+
+			interrupt-parent = <&intc>;
+			interrupts = <3>;
+		};
+
+		uart@500 {
+			compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0x500 0x100>;
+
+			resets = <&rstctrl 12>;
+			reset-names = "uart";
+
+			interrupt-parent = <&intc>;
+			interrupts = <5>;
+
+			reg-shift = <2>;
+
+			status = "disabled";
 		};
 
 		gpio0: gpio@600 {
@@ -78,6 +101,11 @@
 			ralink,register-map = [ 00 04 08 0c
 						20 24 28 2c
 						30 34 ];
+			resets = <&rstctrl 13>;
+			reset-names = "pio";
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
 
 			status = "disabled";
 		};
@@ -120,6 +148,9 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			resets = <&rstctrl 18>;
+			reset-names = "spi";
+	
 			status = "disabled";
 		};
 
@@ -127,6 +158,9 @@
 			compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
 
+			resets = <&rstctrl 19>;
+			reset-names = "uartl";
+
 			interrupt-parent = <&intc>;
 			interrupts = <12>;
 
@@ -134,6 +168,11 @@
 		};
 	};
 
+	rstctrl: rstctrl {
+		compatible = "ralink,rt3352-reset", "ralink,rt2880-reset";
+		#reset-cells = <1>;
+	};
+
 	ethernet@10100000 {
 		compatible = "ralink,rt3352-eth", "ralink,rt3050-eth";
 		reg = <0x10100000 10000>;
diff --git a/target/linux/ramips/dts/rt3883.dtsi b/target/linux/ramips/dts/rt3883.dtsi
index 6f824d5e86..046c9e9a92 100644
--- a/target/linux/ramips/dts/rt3883.dtsi
+++ b/target/linux/ramips/dts/rt3883.dtsi
@@ -17,10 +17,6 @@
 		spi0 = &spi0;
 	};
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x10000000>;
-	};
-
 	cpuintc: cpuintc@0 {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
@@ -52,12 +48,21 @@
 		watchdog@120 {
 			compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
 			reg = <0x120 0x10>;
+
+			resets = <&rstctrl 8>;
+			reset-names = "wdt";
+
+			interrupt-parent = <&intc>;
+			interrupts = <1>;
 		};
 
 		intc: intc@200 {
 			compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
 			reg = <0x200 0x100>;
 
+			resets = <&rstctrl 19>;
+			reset-names = "intc";
+
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
@@ -68,12 +73,39 @@
 		memc@300 {
 			compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
 			reg = <0x300 0x100>;
+
+			resets = <&rstctrl 20>;
+			reset-names = "mc";
+
+			interrupt-parent = <&intc>;
+			interrupts = <3>;
+		};
+
+		uart@500 {
+			compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0x500 0x100>;
+
+			resets = <&rstctrl 12>;
+			reset-names = "uart";
+
+			interrupt-parent = <&intc>;
+			interrupts = <5>;
+
+			reg-shift = <2>;
+
+			status = "disabled";
 		};
 
 		gpio0: gpio@600 {
 			compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
 			reg = <0x600 0x34>;
 
+			resets = <&rstctrl 13>;
+			reset-names = "pio";
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
 			gpio-controller;
 			#gpio-cells = <2>;
 
@@ -140,6 +172,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			resets = <&rstctrl 18>;
+			reset-names = "spi";
+
 			status = "disabled";
 		};
 
@@ -147,6 +182,9 @@
 			compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
 
+			resets = <&rstctrl 19>;
+			reset-names = "uartl";
+
 			interrupt-parent = <&intc>;
 			interrupts = <12>;
 
@@ -163,6 +201,11 @@
 
 		status = "disabled";
 
+		port@0 {
+			compatible = "lantiq,rt3883-port", "ralink,eth-port";
+			reg = <0>;
+		};
+
 		mdio-bus {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -171,6 +214,11 @@
 		};
 	};
 
+	rstctrl: rstctrl {
+		compatible = "ralink,rt3883-reset", "ralink,rt2880-reset";
+		#reset-cells = <1>;
+	};
+
 	pci@10140000 {
 		compatible = "ralink,rt3883-pci";
 		reg = <0x10140000 0x20000>;
@@ -257,6 +305,13 @@
 		};
 	};
 
+	ubsphy {
+		compatible = "ralink,rt3xxx-usbphy";
+
+		resets = <&rstctrl 22 &rstctrl 25>;
+		reset-names = "host", "device";
+	};
+
 	wmac@10180000 {
 		compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac";
 		reg = <0x10180000 40000>;
diff --git a/target/linux/ramips/dts/rt5350.dtsi b/target/linux/ramips/dts/rt5350.dtsi
index c48d7810f6..e132699da3 100644
--- a/target/linux/ramips/dts/rt5350.dtsi
+++ b/target/linux/ramips/dts/rt5350.dtsi
@@ -13,10 +13,6 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x4000000>;
-	};
-
 	cpuintc: cpuintc@0 {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
@@ -48,12 +44,21 @@
 		watchdog@120 {
 			compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
 			reg = <0x120 0x10>;
+
+			resets = <&rstctrl 8>;
+			reset-names = "wdt";
+
+			interrupt-parent = <&intc>;
+			interrupts = <1>;
 		};
 
 		intc: intc@200 {
 			compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
 			reg = <0x200 0x100>;
 
+			resets = <&rstctrl 19>;
+			reset-names = "intc";
+
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
@@ -64,12 +69,39 @@
 		memc@300 {
 			compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
 			reg = <0x300 0x100>;
+
+			resets = <&rstctrl 20>;
+			reset-names = "mc";
+
+			interrupt-parent = <&intc>;
+			interrupts = <3>;
+		};
+
+		uart@500 {
+			compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0x500 0x100>;
+
+			resets = <&rstctrl 12>;
+			reset-names = "uart";
+
+			interrupt-parent = <&intc>;
+			interrupts = <5>;
+
+			reg-shift = <2>;
+
+			status = "disabled";
 		};
 
 		gpio0: gpio@600 {
 			compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
 			reg = <0x600 0x34>;
 
+			resets = <&rstctrl 13>;
+			reset-names = "pio";
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
 			gpio-controller;
 			#gpio-cells = <2>;
 
@@ -86,6 +118,9 @@
 			compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
 			reg = <0x638 0x24>;
 
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
 			gpio-controller;
 			#gpio-cells = <2>;
 
@@ -102,6 +137,9 @@
 			compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
 			reg = <0x660 0x24>;
 
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+
 			gpio-controller;
 			#gpio-cells = <2>;
 
@@ -114,9 +152,26 @@
 			status = "disabled";
 		};
 
+		i2c@900 {
+			compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
+			reg = <0x900 0x100>;
+
+			resets = <&rstctrl 16>;
+			reset-names = "i2c";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		spi@b00 {
 			compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
 			reg = <0xb00 0x100>;
+
+			resets = <&rstctrl 18>;
+			reset-names = "spi";
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 
@@ -127,15 +182,38 @@
 			compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
 
+			resets = <&rstctrl 19>;
+			reset-names = "uartl";
+
 			interrupt-parent = <&intc>;
 			interrupts = <12>;
 
 			reg-shift = <2>;
 		};
+
+		systick@d00 {
+			compatible = "ralink,rt5350-systick", "ralink,cevt-systick";
+			reg = <0xd00 0x10>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <7>;
+		};
+	};
+
+	rstctrl: rstctrl {
+		compatible = "ralink,rt5350-reset", "ralink,rt2880-reset";
+		#reset-cells = <1>;
+	};
+
+	ubsphy {
+		compatible = "ralink,rt3xxx-usbphy";
+
+		resets = <&rstctrl 22 &rstctrl 25>;
+		reset-names = "host", "device";
 	};
 
 	ethernet@10100000 {
-		compatible = "ralink,rt5350-eth", "ralink,rt3050-eth";
+		compatible = "ralink,rt5350-eth";
 		reg = <0x10100000 10000>;
 
 		interrupt-parent = <&cpuintc>;
@@ -145,7 +223,7 @@
 	};
 
 	esw@10110000 {
-		compatible = "ralink,rt5350-esw", "ralink,rt3050-esw";
+		compatible = "ralink,rt3050-esw";
 		reg = <0x10110000 8000>;
 
 		interrupt-parent = <&intc>;
@@ -167,22 +245,18 @@
 	};
 
 	ehci@101c0000 {
-		compatible = "ralink,rt5350-ehci", "ehci-platform";
+		compatible = "ralink,rt3xxx-ehci", "ehci-platform";
 		reg = <0x101c0000 0x1000>;
 
 		interrupt-parent = <&intc>;
 		interrupts = <18>;
-
-		status = "disabled";
 	};
 
 	ohci@101c1000 {
-		compatible = "ralink,rt5350-ohci", "ohci-platform";
+		compatible = "ralink,rt3xxx-ohci", "ohci-platform";
 		reg = <0x101c1000 0x1000>;
 
 		interrupt-parent = <&intc>;
 		interrupts = <18>;
-
-		status = "disabled";
 	};
 };
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index f00eb6c1f4..5f2c3113d2 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -519,6 +519,18 @@ define Image/Build/Profile/Default
 endef
 endif
 
+#
+# MT7620A Profiles
+#
+
+Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
+
+ifeq ($(SUBTARGET),mt7620a)
+define Image/Build/Profile/Default
+	$(call Image/Build/Profile/MT7620a,$(1))
+endef
+endif
+
 
 #
 # Generic Targets
diff --git a/target/linux/ramips/image/lzma-loader/Makefile b/target/linux/ramips/image/lzma-loader/Makefile
new file mode 100644
index 0000000000..783301695f
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/Makefile
@@ -0,0 +1,65 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+LZMA_TEXT_START	:= 0x80a00000
+LOADER		:= loader.bin
+LOADER_NAME	:= $(basename $(notdir $(LOADER)))
+LOADER_DATA 	:=
+TARGET_DIR	:=
+FLASH_OFFS	:=
+FLASH_MAX	:=
+BOARD		:=
+
+ifeq ($(TARGET_DIR),)
+TARGET_DIR	:= $(KDIR)
+endif
+
+LOADER_BIN	:= $(TARGET_DIR)/$(LOADER_NAME).bin
+LOADER_GZ	:= $(TARGET_DIR)/$(LOADER_NAME).gz
+LOADER_ELF	:= $(TARGET_DIR)/$(LOADER_NAME).elf
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)
+
+.PHONY : loader-compile loader.bin loader.elf loader.gz
+
+$(PKG_BUILD_DIR)/.prepared:
+	mkdir $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+	touch $@
+
+loader-compile: $(PKG_BUILD_DIR)/.prepared
+	$(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \
+		LZMA_TEXT_START=$(LZMA_TEXT_START) \
+		LOADER_DATA=$(LOADER_DATA) \
+		FLASH_OFFS=$(FLASH_OFFS) \
+		FLASH_MAX=$(FLASH_MAX) \
+		BOARD="$(BOARD)" \
+		PLATFORM="ralink" \
+		clean all
+
+loader.gz: $(PKG_BUILD_DIR)/loader.bin
+	gzip -nc9 $< > $(LOADER_GZ)
+
+loader.elf: $(PKG_BUILD_DIR)/loader.elf
+	$(CP) $< $(LOADER_ELF)
+
+loader.bin: $(PKG_BUILD_DIR)/loader.bin
+	$(CP) $< $(LOADER_BIN)
+
+download:
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: loader-compile
+
+install:
+
+clean:
+	rm -rf $(PKG_BUILD_DIR)
+
diff --git a/target/linux/ramips/image/lzma-loader/src/LzmaDecode.c b/target/linux/ramips/image/lzma-loader/src/LzmaDecode.c
new file mode 100644
index 0000000000..cb8345377e
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/LzmaDecode.c
@@ -0,0 +1,584 @@
+/*
+  LzmaDecode.c
+  LZMA Decoder (optimized for Speed version)
+  
+  LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this Code, expressly permits you to 
+  statically or dynamically link your Code (or bind by name) to the 
+  interfaces of this file without subjecting your linked Code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_READ_BYTE (*Buffer++)
+
+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
+  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
+
+#ifdef _LZMA_IN_CB
+
+#define RC_TEST { if (Buffer == BufferLim) \
+  { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
+  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
+
+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
+
+#else
+
+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
+
+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
+ 
+#endif
+
+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
+
+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
+
+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
+  { UpdateBit0(p); mi <<= 1; A0; } else \
+  { UpdateBit1(p); mi = (mi + mi) + 1; A1; } 
+  
+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)               
+
+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
+  { int i = numLevels; res = 1; \
+  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
+  res -= (1 << numLevels); }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
+{
+  unsigned char prop0;
+  if (size < LZMA_PROPERTIES_SIZE)
+    return LZMA_RESULT_DATA_ERROR;
+  prop0 = propsData[0];
+  if (prop0 >= (9 * 5 * 5))
+    return LZMA_RESULT_DATA_ERROR;
+  {
+    for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
+    for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
+    propsRes->lc = prop0;
+    /*
+    unsigned char remainder = (unsigned char)(prop0 / 9);
+    propsRes->lc = prop0 % 9;
+    propsRes->pb = remainder / 5;
+    propsRes->lp = remainder % 5;
+    */
+  }
+
+  #ifdef _LZMA_OUT_READ
+  {
+    int i;
+    propsRes->DictionarySize = 0;
+    for (i = 0; i < 4; i++)
+      propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
+    if (propsRes->DictionarySize == 0)
+      propsRes->DictionarySize = 1;
+  }
+  #endif
+  return LZMA_RESULT_OK;
+}
+
+#define kLzmaStreamWasFinishedId (-1)
+
+int LzmaDecode(CLzmaDecoderState *vs,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *InCallback,
+    #else
+    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+    #endif
+    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
+{
+  CProb *p = vs->Probs;
+  SizeT nowPos = 0;
+  Byte previousByte = 0;
+  UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
+  UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
+  int lc = vs->Properties.lc;
+
+  #ifdef _LZMA_OUT_READ
+  
+  UInt32 Range = vs->Range;
+  UInt32 Code = vs->Code;
+  #ifdef _LZMA_IN_CB
+  const Byte *Buffer = vs->Buffer;
+  const Byte *BufferLim = vs->BufferLim;
+  #else
+  const Byte *Buffer = inStream;
+  const Byte *BufferLim = inStream + inSize;
+  #endif
+  int state = vs->State;
+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+  int len = vs->RemainLen;
+  UInt32 globalPos = vs->GlobalPos;
+  UInt32 distanceLimit = vs->DistanceLimit;
+
+  Byte *dictionary = vs->Dictionary;
+  UInt32 dictionarySize = vs->Properties.DictionarySize;
+  UInt32 dictionaryPos = vs->DictionaryPos;
+
+  Byte tempDictionary[4];
+
+  #ifndef _LZMA_IN_CB
+  *inSizeProcessed = 0;
+  #endif
+  *outSizeProcessed = 0;
+  if (len == kLzmaStreamWasFinishedId)
+    return LZMA_RESULT_OK;
+
+  if (dictionarySize == 0)
+  {
+    dictionary = tempDictionary;
+    dictionarySize = 1;
+    tempDictionary[0] = vs->TempDictionary[0];
+  }
+
+  if (len == kLzmaNeedInitId)
+  {
+    {
+      UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+      UInt32 i;
+      for (i = 0; i < numProbs; i++)
+        p[i] = kBitModelTotal >> 1; 
+      rep0 = rep1 = rep2 = rep3 = 1;
+      state = 0;
+      globalPos = 0;
+      distanceLimit = 0;
+      dictionaryPos = 0;
+      dictionary[dictionarySize - 1] = 0;
+      #ifdef _LZMA_IN_CB
+      RC_INIT;
+      #else
+      RC_INIT(inStream, inSize);
+      #endif
+    }
+    len = 0;
+  }
+  while(len != 0 && nowPos < outSize)
+  {
+    UInt32 pos = dictionaryPos - rep0;
+    if (pos >= dictionarySize)
+      pos += dictionarySize;
+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+    if (++dictionaryPos == dictionarySize)
+      dictionaryPos = 0;
+    len--;
+  }
+  if (dictionaryPos == 0)
+    previousByte = dictionary[dictionarySize - 1];
+  else
+    previousByte = dictionary[dictionaryPos - 1];
+
+  #else /* if !_LZMA_OUT_READ */
+
+  int state = 0;
+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+  int len = 0;
+  const Byte *Buffer;
+  const Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+
+  #ifndef _LZMA_IN_CB
+  *inSizeProcessed = 0;
+  #endif
+  *outSizeProcessed = 0;
+
+  {
+    UInt32 i;
+    UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+    for (i = 0; i < numProbs; i++)
+      p[i] = kBitModelTotal >> 1;
+  }
+  
+  #ifdef _LZMA_IN_CB
+  RC_INIT;
+  #else
+  RC_INIT(inStream, inSize);
+  #endif
+
+  #endif /* _LZMA_OUT_READ */
+
+  while(nowPos < outSize)
+  {
+    CProb *prob;
+    UInt32 bound;
+    int posState = (int)(
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & posStateMask);
+
+    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
+    IfBit0(prob)
+    {
+      int symbol = 1;
+      UpdateBit0(prob)
+      prob = p + Literal + (LZMA_LIT_SIZE * 
+        (((
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+      if (state >= kNumLitStates)
+      {
+        int matchByte;
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        matchByte = dictionary[pos];
+        #else
+        matchByte = outStream[nowPos - rep0];
+        #endif
+        do
+        {
+          int bit;
+          CProb *probLit;
+          matchByte <<= 1;
+          bit = (matchByte & 0x100);
+          probLit = prob + 0x100 + bit + symbol;
+          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
+        }
+        while (symbol < 0x100);
+      }
+      while (symbol < 0x100)
+      {
+        CProb *probLit = prob + symbol;
+        RC_GET_BIT(probLit, symbol)
+      }
+      previousByte = (Byte)symbol;
+
+      outStream[nowPos++] = previousByte;
+      #ifdef _LZMA_OUT_READ
+      if (distanceLimit < dictionarySize)
+        distanceLimit++;
+
+      dictionary[dictionaryPos] = previousByte;
+      if (++dictionaryPos == dictionarySize)
+        dictionaryPos = 0;
+      #endif
+      if (state < 4) state = 0;
+      else if (state < 10) state -= 3;
+      else state -= 6;
+    }
+    else             
+    {
+      UpdateBit1(prob);
+      prob = p + IsRep + state;
+      IfBit0(prob)
+      {
+        UpdateBit0(prob);
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        state = state < kNumLitStates ? 0 : 3;
+        prob = p + LenCoder;
+      }
+      else
+      {
+        UpdateBit1(prob);
+        prob = p + IsRepG0 + state;
+        IfBit0(prob)
+        {
+          UpdateBit0(prob);
+          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
+          IfBit0(prob)
+          {
+            #ifdef _LZMA_OUT_READ
+            UInt32 pos;
+            #endif
+            UpdateBit0(prob);
+            
+            #ifdef _LZMA_OUT_READ
+            if (distanceLimit == 0)
+            #else
+            if (nowPos == 0)
+            #endif
+              return LZMA_RESULT_DATA_ERROR;
+            
+            state = state < kNumLitStates ? 9 : 11;
+            #ifdef _LZMA_OUT_READ
+            pos = dictionaryPos - rep0;
+            if (pos >= dictionarySize)
+              pos += dictionarySize;
+            previousByte = dictionary[pos];
+            dictionary[dictionaryPos] = previousByte;
+            if (++dictionaryPos == dictionarySize)
+              dictionaryPos = 0;
+            #else
+            previousByte = outStream[nowPos - rep0];
+            #endif
+            outStream[nowPos++] = previousByte;
+            #ifdef _LZMA_OUT_READ
+            if (distanceLimit < dictionarySize)
+              distanceLimit++;
+            #endif
+
+            continue;
+          }
+          else
+          {
+            UpdateBit1(prob);
+          }
+        }
+        else
+        {
+          UInt32 distance;
+          UpdateBit1(prob);
+          prob = p + IsRepG1 + state;
+          IfBit0(prob)
+          {
+            UpdateBit0(prob);
+            distance = rep1;
+          }
+          else 
+          {
+            UpdateBit1(prob);
+            prob = p + IsRepG2 + state;
+            IfBit0(prob)
+            {
+              UpdateBit0(prob);
+              distance = rep2;
+            }
+            else
+            {
+              UpdateBit1(prob);
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        state = state < kNumLitStates ? 8 : 11;
+        prob = p + RepLenCoder;
+      }
+      {
+        int numBits, offset;
+        CProb *probLen = prob + LenChoice;
+        IfBit0(probLen)
+        {
+          UpdateBit0(probLen);
+          probLen = prob + LenLow + (posState << kLenNumLowBits);
+          offset = 0;
+          numBits = kLenNumLowBits;
+        }
+        else
+        {
+          UpdateBit1(probLen);
+          probLen = prob + LenChoice2;
+          IfBit0(probLen)
+          {
+            UpdateBit0(probLen);
+            probLen = prob + LenMid + (posState << kLenNumMidBits);
+            offset = kLenNumLowSymbols;
+            numBits = kLenNumMidBits;
+          }
+          else
+          {
+            UpdateBit1(probLen);
+            probLen = prob + LenHigh;
+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
+            numBits = kLenNumHighBits;
+          }
+        }
+        RangeDecoderBitTreeDecode(probLen, numBits, len);
+        len += offset;
+      }
+
+      if (state < 4)
+      {
+        int posSlot;
+        state += kNumLitStates;
+        prob = p + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
+            kNumPosSlotBits);
+        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+          rep0 = (2 | ((UInt32)posSlot & 1));
+          if (posSlot < kEndPosModelIndex)
+          {
+            rep0 <<= numDirectBits;
+            prob = p + SpecPos + rep0 - posSlot - 1;
+          }
+          else
+          {
+            numDirectBits -= kNumAlignBits;
+            do
+            {
+              RC_NORMALIZE
+              Range >>= 1;
+              rep0 <<= 1;
+              if (Code >= Range)
+              {
+                Code -= Range;
+                rep0 |= 1;
+              }
+            }
+            while (--numDirectBits != 0);
+            prob = p + Align;
+            rep0 <<= kNumAlignBits;
+            numDirectBits = kNumAlignBits;
+          }
+          {
+            int i = 1;
+            int mi = 1;
+            do
+            {
+              CProb *prob3 = prob + mi;
+              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
+              i <<= 1;
+            }
+            while(--numDirectBits != 0);
+          }
+        }
+        else
+          rep0 = posSlot;
+        if (++rep0 == (UInt32)(0))
+        {
+          /* it's for stream version */
+          len = kLzmaStreamWasFinishedId;
+          break;
+        }
+      }
+
+      len += kMatchMinLen;
+      #ifdef _LZMA_OUT_READ
+      if (rep0 > distanceLimit) 
+      #else
+      if (rep0 > nowPos)
+      #endif
+        return LZMA_RESULT_DATA_ERROR;
+
+      #ifdef _LZMA_OUT_READ
+      if (dictionarySize - distanceLimit > (UInt32)len)
+        distanceLimit += len;
+      else
+        distanceLimit = dictionarySize;
+      #endif
+
+      do
+      {
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        previousByte = dictionary[pos];
+        dictionary[dictionaryPos] = previousByte;
+        if (++dictionaryPos == dictionarySize)
+          dictionaryPos = 0;
+        #else
+        previousByte = outStream[nowPos - rep0];
+        #endif
+        len--;
+        outStream[nowPos++] = previousByte;
+      }
+      while(len != 0 && nowPos < outSize);
+    }
+  }
+  RC_NORMALIZE;
+
+  #ifdef _LZMA_OUT_READ
+  vs->Range = Range;
+  vs->Code = Code;
+  vs->DictionaryPos = dictionaryPos;
+  vs->GlobalPos = globalPos + (UInt32)nowPos;
+  vs->DistanceLimit = distanceLimit;
+  vs->Reps[0] = rep0;
+  vs->Reps[1] = rep1;
+  vs->Reps[2] = rep2;
+  vs->Reps[3] = rep3;
+  vs->State = state;
+  vs->RemainLen = len;
+  vs->TempDictionary[0] = tempDictionary[0];
+  #endif
+
+  #ifdef _LZMA_IN_CB
+  vs->Buffer = Buffer;
+  vs->BufferLim = BufferLim;
+  #else
+  *inSizeProcessed = (SizeT)(Buffer - inStream);
+  #endif
+  *outSizeProcessed = nowPos;
+  return LZMA_RESULT_OK;
+}
diff --git a/target/linux/ramips/image/lzma-loader/src/LzmaDecode.h b/target/linux/ramips/image/lzma-loader/src/LzmaDecode.h
new file mode 100644
index 0000000000..2870eeb9c9
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/LzmaDecode.h
@@ -0,0 +1,113 @@
+/* 
+  LzmaDecode.h
+  LZMA Decoder interface
+
+  LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+#include "LzmaTypes.h"
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs, 
+   but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb UInt16
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+  int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LZMA_PROPERTIES_SIZE 5
+
+typedef struct _CLzmaProperties
+{
+  int lc;
+  int lp;
+  int pb;
+  #ifdef _LZMA_OUT_READ
+  UInt32 DictionarySize;
+  #endif
+}CLzmaProperties;
+
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
+
+#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
+
+#define kLzmaNeedInitId (-2)
+
+typedef struct _CLzmaDecoderState
+{
+  CLzmaProperties Properties;
+  CProb *Probs;
+
+  #ifdef _LZMA_IN_CB
+  const unsigned char *Buffer;
+  const unsigned char *BufferLim;
+  #endif
+
+  #ifdef _LZMA_OUT_READ
+  unsigned char *Dictionary;
+  UInt32 Range;
+  UInt32 Code;
+  UInt32 DictionaryPos;
+  UInt32 GlobalPos;
+  UInt32 DistanceLimit;
+  UInt32 Reps[4];
+  int State;
+  int RemainLen;
+  unsigned char TempDictionary[4];
+  #endif
+} CLzmaDecoderState;
+
+#ifdef _LZMA_OUT_READ
+#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
+#endif
+
+int LzmaDecode(CLzmaDecoderState *vs,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+    #else
+    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+    #endif
+    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
+
+#endif
diff --git a/target/linux/ramips/image/lzma-loader/src/LzmaTypes.h b/target/linux/ramips/image/lzma-loader/src/LzmaTypes.h
new file mode 100644
index 0000000000..9c27290757
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/LzmaTypes.h
@@ -0,0 +1,45 @@
+/* 
+LzmaTypes.h 
+
+Types for LZMA Decoder
+
+This file written and distributed to public domain by Igor Pavlov.
+This file is part of LZMA SDK 4.40 (2006-05-01)
+*/
+
+#ifndef __LZMATYPES_H
+#define __LZMATYPES_H
+
+#ifndef _7ZIP_BYTE_DEFINED
+#define _7ZIP_BYTE_DEFINED
+typedef unsigned char Byte;
+#endif 
+
+#ifndef _7ZIP_UINT16_DEFINED
+#define _7ZIP_UINT16_DEFINED
+typedef unsigned short UInt16;
+#endif 
+
+#ifndef _7ZIP_UINT32_DEFINED
+#define _7ZIP_UINT32_DEFINED
+#ifdef _LZMA_UINT32_IS_ULONG
+typedef unsigned long UInt32;
+#else
+typedef unsigned int UInt32;
+#endif
+#endif 
+
+/* #define _LZMA_NO_SYSTEM_SIZE_T */
+/* You can use it, if you don't want <stddef.h> */
+
+#ifndef _7ZIP_SIZET_DEFINED
+#define _7ZIP_SIZET_DEFINED
+#ifdef _LZMA_NO_SYSTEM_SIZE_T
+typedef UInt32 SizeT;
+#else
+#include <stddef.h>
+typedef size_t SizeT;
+#endif
+#endif
+
+#endif
diff --git a/target/linux/ramips/image/lzma-loader/src/Makefile b/target/linux/ramips/image/lzma-loader/src/Makefile
new file mode 100644
index 0000000000..f861666e62
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/Makefile
@@ -0,0 +1,110 @@
+#
+# Makefile for the LZMA compressed kernel loader for
+# Atheros AR7XXX/AR9XXX based boards
+#
+# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+#
+# Some parts of this file was based on the OpenWrt specific lzma-loader
+# for the BCM47xx and ADM5120 based boards:
+#	Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
+#	Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
+#	Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+#
+
+LOADADDR	:=
+LZMA_TEXT_START	:= 0x80a00000
+LOADER_DATA	:=
+BOARD		:=
+FLASH_OFFS	:=
+FLASH_MAX	:=
+PLATFORM	:=
+
+CC		:= $(CROSS_COMPILE)gcc
+LD		:= $(CROSS_COMPILE)ld
+OBJCOPY		:= $(CROSS_COMPILE)objcopy
+OBJDUMP		:= $(CROSS_COMPILE)objdump
+
+BIN_FLAGS	:= -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS		= -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+		  -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \
+		  -mno-abicalls -fno-pic -ffunction-sections -pipe -mlong-calls \
+		  -fno-common -ffreestanding -fhonour-copts \
+		  -mabi=32 -march=mips32r2 \
+		  -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap
+CFLAGS		+= -D_LZMA_PROB32 -DARCH=$(PLATFORM)
+
+ASFLAGS		= $(CFLAGS) -D__ASSEMBLY__
+
+LDFLAGS		= -static --gc-sections -no-warn-mismatch
+LDFLAGS		+= -e startup -T loader.lds -Ttext $(LZMA_TEXT_START)
+
+O_FORMAT 	= $(shell $(OBJDUMP) -i | head -2 | grep elf32)
+
+OBJECTS		:= head.o loader.o cache.o board-$(PLATFORM).o printf.o LzmaDecode.o
+
+include $(PLATFORM).mk
+CFLAGS+=$(CACHE_FLAGS)
+ASFLAGS+=$(CACHE_FLAGS)
+
+ifneq ($(strip $(LOADER_DATA)),)
+OBJECTS		+= data.o
+CFLAGS		+= -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR)
+endif
+
+ifneq ($(strip $(KERNEL_CMDLINE)),)
+CFLAGS		+= -DCONFIG_KERNEL_CMDLINE='"$(KERNEL_CMDLINE)"'
+endif
+
+ifneq ($(strip $(FLASH_OFFS)),)
+CFLAGS		+= -DCONFIG_FLASH_OFFS=$(FLASH_OFFS)
+endif
+
+ifneq ($(strip $(FLASH_MAX)),)
+CFLAGS		+= -DCONFIG_FLASH_MAX=$(FLASH_MAX)
+endif
+
+BOARD_DEF := $(shell echo $(strip $(BOARD)) | tr a-z A-Z | tr - _)
+ifneq ($(BOARD_DEF),)
+CFLAGS		+= -DCONFIG_BOARD_$(BOARD_DEF)
+endif
+
+all: loader.elf
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c -o $@ $<
+
+%.o : %.S
+	$(CC) $(ASFLAGS) -c -o $@ $<
+
+data.o: $(LOADER_DATA)
+	$(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $<
+
+loader: $(OBJECTS)
+	$(LD) $(LDFLAGS) -o $@ $(OBJECTS)
+
+loader.bin: loader
+	$(OBJCOPY) $(BIN_FLAGS) $< $@
+
+loader2.o: loader.bin
+	$(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $<
+
+loader.elf: loader2.o
+	$(LD) -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $<
+
+mrproper: clean
+
+clean:
+	rm -f loader *.elf *.bin *.o
+
+
+
diff --git a/target/linux/ramips/image/lzma-loader/src/board-ralink.c b/target/linux/ramips/image/lzma-loader/src/board-ralink.c
new file mode 100644
index 0000000000..7c947ec6eb
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/board-ralink.c
@@ -0,0 +1,42 @@
+/*
+ * Arch specific code for Ralink based boards
+ *
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <stddef.h>
+#include "config.h"
+
+#define READREG(r)		*(volatile unsigned int *)(r)
+#define WRITEREG(r,v)		*(volatile unsigned int *)(r) = v
+
+#define KSEG1ADDR(_x)		(((_x) & 0x1fffffff) | 0xa0000000)
+
+#ifdef CONFIG_SOC_RT288X
+#define UART_BASE		0xb0300c00
+#else
+#define UART_BASE		0xb0000c00
+#endif
+
+#define UART_TX			1
+#define UART_LSR		7
+
+#define UART_LSR_THRE		0x20
+
+#define UART_READ(r)		READREG(UART_BASE + 4 * (r))
+#define UART_WRITE(r,v)		WRITEREG(UART_BASE + 4 * (r), (v))
+
+void board_putc(int ch)
+{
+	while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
+	UART_WRITE(UART_TX, ch);
+	while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
+}
+
+void board_init(void)
+{
+}
diff --git a/target/linux/ramips/image/lzma-loader/src/cache.c b/target/linux/ramips/image/lzma-loader/src/cache.c
new file mode 100644
index 0000000000..28cc848333
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/cache.c
@@ -0,0 +1,43 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * The cache manipulation routine has been taken from the U-Boot project.
+ *	(C) Copyright 2003
+ *	Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "cache.h"
+#include "cacheops.h"
+#include "config.h"
+
+#define cache_op(op,addr)						\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noreorder				\n"	\
+	"	.set	mips3\n\t				\n"	\
+	"	cache	%0, %1					\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "i" (op), "R" (*(unsigned char *)(addr)))
+
+void flush_cache(unsigned long start_addr, unsigned long size)
+{
+	unsigned long lsize = CONFIG_CACHELINE_SIZE;
+	unsigned long addr = start_addr & ~(lsize - 1);
+	unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
+
+	while (1) {
+		cache_op(Hit_Writeback_Inv_D, addr);
+		cache_op(Hit_Invalidate_I, addr);
+		if (addr == aend)
+			break;
+		addr += lsize;
+	}
+}
diff --git a/target/linux/ramips/image/lzma-loader/src/cache.h b/target/linux/ramips/image/lzma-loader/src/cache.h
new file mode 100644
index 0000000000..506a235884
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/cache.h
@@ -0,0 +1,17 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef __CACHE_H
+#define __CACHE_H
+
+void flush_cache(unsigned long start_addr, unsigned long size);
+
+#endif /* __CACHE_H */
diff --git a/target/linux/ramips/image/lzma-loader/src/cacheops.h b/target/linux/ramips/image/lzma-loader/src/cacheops.h
new file mode 100644
index 0000000000..70bcad7694
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/cacheops.h
@@ -0,0 +1,85 @@
+/*
+ * Cache operations for the cache instruction.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
+ * (C) Copyright 1999 Silicon Graphics, Inc.
+ */
+#ifndef	__ASM_CACHEOPS_H
+#define	__ASM_CACHEOPS_H
+
+/*
+ * Cache Operations available on all MIPS processors with R4000-style caches
+ */
+#define Index_Invalidate_I      0x00
+#define Index_Writeback_Inv_D   0x01
+#define Index_Load_Tag_I	0x04
+#define Index_Load_Tag_D	0x05
+#define Index_Store_Tag_I	0x08
+#define Index_Store_Tag_D	0x09
+#if defined(CONFIG_CPU_LOONGSON2)
+#define Hit_Invalidate_I	0x00
+#else
+#define Hit_Invalidate_I	0x10
+#endif
+#define Hit_Invalidate_D	0x11
+#define Hit_Writeback_Inv_D	0x15
+
+/*
+ * R4000-specific cacheops
+ */
+#define Create_Dirty_Excl_D	0x0d
+#define Fill			0x14
+#define Hit_Writeback_I		0x18
+#define Hit_Writeback_D		0x19
+
+/*
+ * R4000SC and R4400SC-specific cacheops
+ */
+#define Index_Invalidate_SI     0x02
+#define Index_Writeback_Inv_SD  0x03
+#define Index_Load_Tag_SI	0x06
+#define Index_Load_Tag_SD	0x07
+#define Index_Store_Tag_SI	0x0A
+#define Index_Store_Tag_SD	0x0B
+#define Create_Dirty_Excl_SD	0x0f
+#define Hit_Invalidate_SI	0x12
+#define Hit_Invalidate_SD	0x13
+#define Hit_Writeback_Inv_SD	0x17
+#define Hit_Writeback_SD	0x1b
+#define Hit_Set_Virtual_SI	0x1e
+#define Hit_Set_Virtual_SD	0x1f
+
+/*
+ * R5000-specific cacheops
+ */
+#define R5K_Page_Invalidate_S	0x17
+
+/*
+ * RM7000-specific cacheops
+ */
+#define Page_Invalidate_T	0x16
+
+/*
+ * R10000-specific cacheops
+ *
+ * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
+ * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
+ */
+#define Index_Writeback_Inv_S	0x03
+#define Index_Load_Tag_S	0x07
+#define Index_Store_Tag_S	0x0B
+#define Hit_Invalidate_S	0x13
+#define Cache_Barrier		0x14
+#define Hit_Writeback_Inv_S	0x17
+#define Index_Load_Data_I	0x18
+#define Index_Load_Data_D	0x19
+#define Index_Load_Data_S	0x1b
+#define Index_Store_Data_I	0x1c
+#define Index_Store_Data_D	0x1d
+#define Index_Store_Data_S	0x1f
+
+#endif	/* __ASM_CACHEOPS_H */
diff --git a/target/linux/ramips/image/lzma-loader/src/config.h b/target/linux/ramips/image/lzma-loader/src/config.h
new file mode 100644
index 0000000000..b7719e9ca8
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/config.h
@@ -0,0 +1,27 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _CONFIG_H_
+#define _CONFIG_H_
+
+#ifndef CONFIG_FLASH_OFFS
+#define CONFIG_FLASH_OFFS	0
+#endif
+
+#ifndef CONFIG_FLASH_MAX
+#define CONFIG_FLASH_MAX	0
+#endif
+
+#ifndef CONFIG_FLASH_STEP
+#define CONFIG_FLASH_STEP	0x1000
+#endif
+
+#endif /* _CONFIG_H_ */
diff --git a/target/linux/ramips/image/lzma-loader/src/cp0regdef.h b/target/linux/ramips/image/lzma-loader/src/cp0regdef.h
new file mode 100644
index 0000000000..c1188ad8c8
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/cp0regdef.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
+ *
+ * Copyright (C) 2001, Monta Vista Software
+ * Author: jsun@mvista.com or jsun@junsun.net
+ */
+#ifndef _cp0regdef_h_
+#define _cp0regdef_h_
+
+#define CP0_INDEX $0
+#define CP0_RANDOM $1
+#define CP0_ENTRYLO0 $2
+#define CP0_ENTRYLO1 $3
+#define CP0_CONTEXT $4
+#define CP0_PAGEMASK $5
+#define CP0_WIRED $6
+#define CP0_BADVADDR $8
+#define CP0_COUNT $9
+#define CP0_ENTRYHI $10
+#define CP0_COMPARE $11
+#define CP0_STATUS $12
+#define CP0_CAUSE $13
+#define CP0_EPC $14
+#define CP0_PRID $15
+#define CP0_CONFIG $16
+#define CP0_LLADDR $17
+#define CP0_WATCHLO $18
+#define CP0_WATCHHI $19
+#define CP0_XCONTEXT $20
+#define CP0_FRAMEMASK $21
+#define CP0_DIAGNOSTIC $22
+#define CP0_PERFORMANCE $25
+#define CP0_ECC $26
+#define CP0_CACHEERR $27
+#define CP0_TAGLO $28
+#define CP0_TAGHI $29
+#define CP0_ERROREPC $30
+
+#endif
diff --git a/target/linux/ramips/image/lzma-loader/src/head.S b/target/linux/ramips/image/lzma-loader/src/head.S
new file mode 100644
index 0000000000..543996a0da
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/head.S
@@ -0,0 +1,118 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Some parts of this code was based on the OpenWrt specific lzma-loader
+ * for the BCM47xx and ADM5120 based boards:
+ *	Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
+ *	Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include "cp0regdef.h"
+#include "cacheops.h"
+#include "config.h"
+
+#define KSEG0		0x80000000
+
+	.macro	ehb
+	sll     zero, 3
+	.endm
+
+	.text
+
+LEAF(startup)
+	.set noreorder
+	.set mips32
+
+	mtc0	zero, CP0_WATCHLO	# clear watch registers
+	mtc0	zero, CP0_WATCHHI
+	mtc0	zero, CP0_CAUSE		# clear before writing status register
+
+	mfc0	t0, CP0_STATUS
+	li	t1, 0x1000001f
+	or	t0, t1
+	xori	t0, 0x1f
+	mtc0	t0, CP0_STATUS
+	ehb
+
+	mtc0	zero, CP0_COUNT
+	mtc0	zero, CP0_COMPARE
+	ehb
+
+	la	t0, __reloc_label	# get linked address of label
+	bal	__reloc_label		# branch and link to label to
+	nop				# get actual address
+__reloc_label:
+	subu	t0, ra, t0		# get reloc_delta
+
+	beqz	t0, __reloc_done         # if delta is 0 we are in the right place
+	nop
+
+	/* Copy our code to the right place */
+	la	t1, _code_start		# get linked address of _code_start
+	la	t2, _code_end		# get linked address of _code_end
+	addu	t0, t0, t1		# calculate actual address of _code_start
+
+__reloc_copy:
+	lw	t3, 0(t0)
+	sw	t3, 0(t1)
+	add	t1, 4
+	blt	t1, t2, __reloc_copy
+	add	t0, 4
+
+	/* flush cache */
+	la	t0, _code_start
+	la	t1, _code_end
+
+	li	t2, ~(CONFIG_CACHELINE_SIZE - 1)
+	and	t0, t2
+	and	t1, t2
+	li	t2, CONFIG_CACHELINE_SIZE
+
+	b	__flush_check
+	nop
+
+__flush_line:
+	cache	Hit_Writeback_Inv_D, 0(t0)
+	cache	Hit_Invalidate_I, 0(t0)
+	add	t0, t2
+
+__flush_check:
+	bne	t0, t1, __flush_line
+	nop
+
+	sync
+
+__reloc_done:
+
+	/* clear bss */
+	la	t0, _bss_start
+	la	t1, _bss_end
+	b	__bss_check
+	nop
+
+__bss_fill:
+	sw	zero, 0(t0)
+	addi	t0, 4
+
+__bss_check:
+	bne	t0, t1, __bss_fill
+	nop
+
+	/* Setup new "C" stack */
+	la	sp, _stack
+
+	/* jump to the decompressor routine */
+	la	t0, loader_main
+	jr	t0
+	nop
+
+	.set reorder
+END(startup)
diff --git a/target/linux/ramips/image/lzma-loader/src/lantiq.mk b/target/linux/ramips/image/lzma-loader/src/lantiq.mk
new file mode 100644
index 0000000000..413764593b
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/lantiq.mk
@@ -0,0 +1 @@
+CACHE_FLAGS+=-DCONFIG_ICACHE_SIZE="(32 * 1024)" -DCONFIG_DCACHE_SIZE="(32 * 1024)" -DCONFIG_CACHELINE_SIZE=32
diff --git a/target/linux/ramips/image/lzma-loader/src/loader.c b/target/linux/ramips/image/lzma-loader/src/loader.c
new file mode 100644
index 0000000000..1d42bfa2f7
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/loader.c
@@ -0,0 +1,263 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Some parts of this code was based on the OpenWrt specific lzma-loader
+ * for the BCM47xx and ADM5120 based boards:
+ *	Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
+ *	Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
+ *	Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * The image_header structure has been taken from the U-Boot project.
+ *	(C) Copyright 2008 Semihalf
+ *	(C) Copyright 2000-2005
+ *	Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <stddef.h>
+#include <stdint.h>
+
+#include "config.h"
+#include "cache.h"
+#include "printf.h"
+#include "LzmaDecode.h"
+
+#define AR71XX_FLASH_START	0x1f000000
+#define AR71XX_FLASH_END	0x1fe00000
+
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+
+#define KSEG1ADDR(a)		((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#undef LZMA_DEBUG
+
+#ifdef LZMA_DEBUG
+#  define DBG(f, a...)	printf(f, ## a)
+#else
+#  define DBG(f, a...)	do {} while (0)
+#endif
+
+#define IH_MAGIC_OKLI		0x4f4b4c49	/* 'OKLI' */
+
+#define IH_NMLEN		32	/* Image Name Length		*/
+
+typedef struct image_header {
+	uint32_t	ih_magic;	/* Image Header Magic Number	*/
+	uint32_t	ih_hcrc;	/* Image Header CRC Checksum	*/
+	uint32_t	ih_time;	/* Image Creation Timestamp	*/
+	uint32_t	ih_size;	/* Image Data Size		*/
+	uint32_t	ih_load;	/* Data	 Load  Address		*/
+	uint32_t	ih_ep;		/* Entry Point Address		*/
+	uint32_t	ih_dcrc;	/* Image Data CRC Checksum	*/
+	uint8_t		ih_os;		/* Operating System		*/
+	uint8_t		ih_arch;	/* CPU architecture		*/
+	uint8_t		ih_type;	/* Image Type			*/
+	uint8_t		ih_comp;	/* Compression Type		*/
+	uint8_t		ih_name[IH_NMLEN];	/* Image Name		*/
+} image_header_t;
+
+/* beyond the image end, size not known in advance */
+extern unsigned char workspace[];
+extern void board_init(void);
+
+static CLzmaDecoderState lzma_state;
+static unsigned char *lzma_data;
+static unsigned long lzma_datasize;
+static unsigned long lzma_outsize;
+static unsigned long kernel_la;
+
+#ifdef CONFIG_KERNEL_CMDLINE
+#define kernel_argc	1
+static const char kernel_cmdline[] = CONFIG_KERNEL_CMDLINE;
+static const char *kernel_argv[] = {
+	kernel_cmdline,
+	NULL,
+};
+#endif /* CONFIG_KERNEL_CMDLINE */
+
+static void halt(void)
+{
+	printf("\nSystem halted!\n");
+	for(;;);
+}
+
+static __inline__ unsigned long get_be32(void *buf)
+{
+	unsigned char *p = buf;
+
+	return (((unsigned long) p[0] << 24) +
+	        ((unsigned long) p[1] << 16) +
+	        ((unsigned long) p[2] << 8) +
+	        (unsigned long) p[3]);
+}
+
+static __inline__ unsigned char lzma_get_byte(void)
+{
+	unsigned char c;
+
+	lzma_datasize--;
+	c = *lzma_data++;
+
+	return c;
+}
+
+static int lzma_init_props(void)
+{
+	unsigned char props[LZMA_PROPERTIES_SIZE];
+	int res;
+	int i;
+
+	/* read lzma properties */
+	for (i = 0; i < LZMA_PROPERTIES_SIZE; i++)
+		props[i] = lzma_get_byte();
+
+	/* read the lower half of uncompressed size in the header */
+	lzma_outsize = ((SizeT) lzma_get_byte()) +
+		       ((SizeT) lzma_get_byte() << 8) +
+		       ((SizeT) lzma_get_byte() << 16) +
+		       ((SizeT) lzma_get_byte() << 24);
+
+	/* skip rest of the header (upper half of uncompressed size) */
+	for (i = 0; i < 4; i++)
+		lzma_get_byte();
+
+	res = LzmaDecodeProperties(&lzma_state.Properties, props,
+					LZMA_PROPERTIES_SIZE);
+	return res;
+}
+
+static int lzma_decompress(unsigned char *outStream)
+{
+	SizeT ip, op;
+	int ret;
+
+	lzma_state.Probs = (CProb *) workspace;
+
+	ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream,
+			 lzma_outsize, &op);
+
+	if (ret != LZMA_RESULT_OK) {
+		int i;
+
+		DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n",
+		    ret, lzma_data + ip, lzma_outsize, ip, op);
+
+		for (i = 0; i < 16; i++)
+			DBG("%02x ", lzma_data[ip + i]);
+
+		DBG("\n");
+	}
+
+	return ret;
+}
+
+#if (LZMA_WRAPPER)
+static void lzma_init_data(void)
+{
+	extern unsigned char _lzma_data_start[];
+	extern unsigned char _lzma_data_end[];
+
+	kernel_la = LOADADDR;
+	lzma_data = _lzma_data_start;
+	lzma_datasize = _lzma_data_end - _lzma_data_start;
+}
+#else
+static void lzma_init_data(void)
+{
+	struct image_header *hdr = NULL;
+	unsigned char *flash_base;
+	unsigned long flash_ofs;
+	unsigned long kernel_ofs;
+	unsigned long kernel_size;
+
+	flash_base = (unsigned char *) KSEG1ADDR(AR71XX_FLASH_START);
+
+	printf("Looking for OpenWrt image... ");
+
+	for (flash_ofs = CONFIG_FLASH_OFFS;
+	     flash_ofs <= (CONFIG_FLASH_OFFS + CONFIG_FLASH_MAX);
+	     flash_ofs += CONFIG_FLASH_STEP) {
+		unsigned long magic;
+		unsigned char *p;
+
+		p = flash_base + flash_ofs;
+		magic = get_be32(p);
+		if (magic == IH_MAGIC_OKLI) {
+			hdr = (struct image_header *) p;
+			break;
+		}
+	}
+
+	if (hdr == NULL) {
+		printf("not found!\n");
+		halt();
+	}
+
+	printf("found at 0x%08x\n", flash_base + flash_ofs);
+
+	kernel_ofs = sizeof(struct image_header);
+	kernel_size = get_be32(&hdr->ih_size);
+	kernel_la = get_be32(&hdr->ih_load);
+
+	lzma_data = flash_base + flash_ofs + kernel_ofs;
+	lzma_datasize = kernel_size;
+}
+#endif /* (LZMA_WRAPPER) */
+
+void loader_main(unsigned long reg_a0, unsigned long reg_a1,
+		 unsigned long reg_a2, unsigned long reg_a3)
+{
+	void (*kernel_entry) (unsigned long, unsigned long, unsigned long,
+			      unsigned long);
+	int res;
+
+	board_init();
+
+	printf("\n\nOpenWrt kernel loader for MIPS based SoC\n");
+	printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n");
+
+	lzma_init_data();
+
+	res = lzma_init_props();
+	if (res != LZMA_RESULT_OK) {
+		printf("Incorrect LZMA stream properties!\n");
+		halt();
+	}
+
+	printf("Decompressing kernel... ");
+
+	res = lzma_decompress((unsigned char *) kernel_la);
+	if (res != LZMA_RESULT_OK) {
+		printf("failed, ");
+		switch (res) {
+		case LZMA_RESULT_DATA_ERROR:
+			printf("data error!\n");
+			break;
+		default:
+			printf("unknown error %d!\n", res);
+		}
+		halt();
+	} else {
+		printf("done!\n");
+	}
+
+	flush_cache(kernel_la, lzma_outsize);
+
+	printf("Starting kernel at %08x...\n\n", kernel_la);
+
+#ifdef CONFIG_KERNEL_CMDLINE
+	reg_a0 = kernel_argc;
+	reg_a1 = (unsigned long) kernel_argv;
+	reg_a2 = 0;
+	reg_a3 = 0;
+#endif
+
+	kernel_entry = (void *) kernel_la;
+	kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3);
+}
diff --git a/target/linux/ramips/image/lzma-loader/src/loader.lds b/target/linux/ramips/image/lzma-loader/src/loader.lds
new file mode 100644
index 0000000000..80cc7ca3ec
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/loader.lds
@@ -0,0 +1,35 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+	.text : {
+		_code_start = .;
+		*(.text)
+		*(.text.*)
+		*(.rodata)
+		*(.rodata.*)
+		*(.data.lzma)
+	}
+
+	. = ALIGN(32);
+	.data : {
+		*(.data)
+		*(.data.*)
+		. = . + 524288;		/* workaround for buggy bootloaders */
+	}
+
+	. = ALIGN(32);
+	_code_end = .;
+
+	_bss_start = .;
+	.bss : {
+		*(.bss)
+		*(.bss.*)
+	}
+
+	. = ALIGN(32);
+	_bss_end = .;
+
+	. = . + 8192;
+	_stack = .;
+
+	workspace = .;
+}
diff --git a/target/linux/ramips/image/lzma-loader/src/loader2.lds b/target/linux/ramips/image/lzma-loader/src/loader2.lds
new file mode 100644
index 0000000000..db0bb46424
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/loader2.lds
@@ -0,0 +1,10 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+	.text : {
+		startup = .;
+		*(.text)
+		*(.text.*)
+		*(.data)
+		*(.data.*)
+	}
+}
diff --git a/target/linux/ramips/image/lzma-loader/src/lzma-data.lds b/target/linux/ramips/image/lzma-loader/src/lzma-data.lds
new file mode 100644
index 0000000000..abf756ba13
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/lzma-data.lds
@@ -0,0 +1,8 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+	.data.lzma : {
+		_lzma_data_start = .;
+		*(.data)
+		_lzma_data_end = .;
+	}
+}
diff --git a/target/linux/ramips/image/lzma-loader/src/printf.c b/target/linux/ramips/image/lzma-loader/src/printf.c
new file mode 100644
index 0000000000..7bb5a86e18
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/printf.c
@@ -0,0 +1,350 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include	"printf.h"
+
+extern void board_putc(int ch);
+
+/* this is the maximum width for a variable */
+#define		LP_MAX_BUF	256
+
+/* macros */
+#define		IsDigit(x)	( ((x) >= '0') && ((x) <= '9') )
+#define		Ctod(x)		( (x) - '0')
+
+/* forward declaration */
+static int PrintChar(char *, char, int, int);
+static int PrintString(char *, char *, int, int);
+static int PrintNum(char *, unsigned long, int, int, int, int, char, int);
+
+/* private variable */
+static const char theFatalMsg[] = "fatal error in lp_Print!";
+
+/* -*-
+ * A low level printf() function.
+ */
+static void
+lp_Print(void (*output)(void *, char *, int),
+	 void * arg,
+	 char *fmt,
+	 va_list ap)
+{
+
+#define 	OUTPUT(arg, s, l)  \
+  { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
+       (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
+    } else { \
+      (*output)(arg, s, l); \
+    } \
+  }
+
+    char buf[LP_MAX_BUF];
+
+    char c;
+    char *s;
+    long int num;
+
+    int longFlag;
+    int negFlag;
+    int width;
+    int prec;
+    int ladjust;
+    char padc;
+
+    int length;
+
+    for(;;) {
+	{
+	    /* scan for the next '%' */
+	    char *fmtStart = fmt;
+	    while ( (*fmt != '\0') && (*fmt != '%')) {
+		fmt ++;
+	    }
+
+	    /* flush the string found so far */
+	    OUTPUT(arg, fmtStart, fmt-fmtStart);
+
+	    /* are we hitting the end? */
+	    if (*fmt == '\0') break;
+	}
+
+	/* we found a '%' */
+	fmt ++;
+
+	/* check for long */
+	if (*fmt == 'l') {
+	    longFlag = 1;
+	    fmt ++;
+	} else {
+	    longFlag = 0;
+	}
+
+	/* check for other prefixes */
+	width = 0;
+	prec = -1;
+	ladjust = 0;
+	padc = ' ';
+
+	if (*fmt == '-') {
+	    ladjust = 1;
+	    fmt ++;
+	}
+
+	if (*fmt == '0') {
+	    padc = '0';
+	    fmt++;
+	}
+
+	if (IsDigit(*fmt)) {
+	    while (IsDigit(*fmt)) {
+		width = 10 * width + Ctod(*fmt++);
+	    }
+	}
+
+	if (*fmt == '.') {
+	    fmt ++;
+	    if (IsDigit(*fmt)) {
+		prec = 0;
+		while (IsDigit(*fmt)) {
+		    prec = prec*10 + Ctod(*fmt++);
+		}
+	    }
+	}
+
+
+	/* check format flag */
+	negFlag = 0;
+	switch (*fmt) {
+	 case 'b':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'd':
+	 case 'D':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    if (num < 0) {
+		num = - num;
+		negFlag = 1;
+	    }
+	    length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'o':
+	 case 'O':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'u':
+	 case 'U':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'x':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'X':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'c':
+	    c = (char)va_arg(ap, int);
+	    length = PrintChar(buf, c, width, ladjust);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 's':
+	    s = (char*)va_arg(ap, char *);
+	    length = PrintString(buf, s, width, ladjust);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case '\0':
+	    fmt --;
+	    break;
+
+	 default:
+	    /* output this char as it is */
+	    OUTPUT(arg, fmt, 1);
+	}	/* switch (*fmt) */
+
+	fmt ++;
+    }		/* for(;;) */
+
+    /* special termination call */
+    OUTPUT(arg, "\0", 1);
+}
+
+
+/* --------------- local help functions --------------------- */
+static int
+PrintChar(char * buf, char c, int length, int ladjust)
+{
+    int i;
+
+    if (length < 1) length = 1;
+    if (ladjust) {
+	*buf = c;
+	for (i=1; i< length; i++) buf[i] = ' ';
+    } else {
+	for (i=0; i< length-1; i++) buf[i] = ' ';
+	buf[length - 1] = c;
+    }
+    return length;
+}
+
+static int
+PrintString(char * buf, char* s, int length, int ladjust)
+{
+    int i;
+    int len=0;
+    char* s1 = s;
+    while (*s1++) len++;
+    if (length < len) length = len;
+
+    if (ladjust) {
+	for (i=0; i< len; i++) buf[i] = s[i];
+	for (i=len; i< length; i++) buf[i] = ' ';
+    } else {
+	for (i=0; i< length-len; i++) buf[i] = ' ';
+	for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
+    }
+    return length;
+}
+
+static int
+PrintNum(char * buf, unsigned long u, int base, int negFlag,
+	 int length, int ladjust, char padc, int upcase)
+{
+    /* algorithm :
+     *  1. prints the number from left to right in reverse form.
+     *  2. fill the remaining spaces with padc if length is longer than
+     *     the actual length
+     *     TRICKY : if left adjusted, no "0" padding.
+     *		    if negtive, insert  "0" padding between "0" and number.
+     *  3. if (!ladjust) we reverse the whole string including paddings
+     *  4. otherwise we only reverse the actual string representing the num.
+     */
+
+    int actualLength =0;
+    char *p = buf;
+    int i;
+
+    do {
+	int tmp = u %base;
+	if (tmp <= 9) {
+	    *p++ = '0' + tmp;
+	} else if (upcase) {
+	    *p++ = 'A' + tmp - 10;
+	} else {
+	    *p++ = 'a' + tmp - 10;
+	}
+	u /= base;
+    } while (u != 0);
+
+    if (negFlag) {
+	*p++ = '-';
+    }
+
+    /* figure out actual length and adjust the maximum length */
+    actualLength = p - buf;
+    if (length < actualLength) length = actualLength;
+
+    /* add padding */
+    if (ladjust) {
+	padc = ' ';
+    }
+    if (negFlag && !ladjust && (padc == '0')) {
+	for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
+	buf[length -1] = '-';
+    } else {
+	for (i = actualLength; i< length; i++) buf[i] = padc;
+    }
+
+
+    /* prepare to reverse the string */
+    {
+	int begin = 0;
+	int end;
+	if (ladjust) {
+	    end = actualLength - 1;
+	} else {
+	    end = length -1;
+	}
+
+	while (end > begin) {
+	    char tmp = buf[begin];
+	    buf[begin] = buf[end];
+	    buf[end] = tmp;
+	    begin ++;
+	    end --;
+	}
+    }
+
+    /* adjust the string pointer */
+    return length;
+}
+
+static void printf_output(void *arg, char *s, int l)
+{
+    int i;
+
+    // special termination call
+    if ((l==1) && (s[0] == '\0')) return;
+
+    for (i=0; i< l; i++) {
+	board_putc(s[i]);
+	if (s[i] == '\n') board_putc('\r');
+    }
+}
+
+void printf(char *fmt, ...)
+{
+    va_list ap;
+    va_start(ap, fmt);
+    lp_Print(printf_output, 0, fmt, ap);
+    va_end(ap);
+}
diff --git a/target/linux/ramips/image/lzma-loader/src/printf.h b/target/linux/ramips/image/lzma-loader/src/printf.h
new file mode 100644
index 0000000000..9b1c1df232
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/printf.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _printf_h_
+#define _printf_h_
+
+#include <stdarg.h>
+void printf(char *fmt, ...);
+
+#endif /* _printf_h_ */
diff --git a/target/linux/ramips/image/lzma-loader/src/ralink.mk b/target/linux/ramips/image/lzma-loader/src/ralink.mk
new file mode 100644
index 0000000000..3ff5fddf98
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/ralink.mk
@@ -0,0 +1 @@
+CACHE_FLAGS+=-DCONFIG_ICACHE_SIZE="(32 * 1024)" -DCONFIG_DCACHE_SIZE="(16 * 1024)" -DCONFIG_CACHELINE_SIZE=32
diff --git a/target/linux/ramips/mt7620a/config-3.8 b/target/linux/ramips/mt7620a/config-3.8
new file mode 100644
index 0000000000..5eeb11e83d
--- /dev/null
+++ b/target/linux/ramips/mt7620a/config-3.8
@@ -0,0 +1,168 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_MT7620A_EVAL is not set
+# CONFIG_DTB_MT7620A_MT7610E_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MII is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_MT7620=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_GSW_MT7620=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+# CONFIG_PCIEAER is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERCPU_RWSEM=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_USBPHY=y
+CONFIG_RALINK_WDT=y
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_MT7620=y
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RALINK=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7620a/config-3.9 b/target/linux/ramips/mt7620a/config-3.9
new file mode 100644
index 0000000000..ea7d6bc11a
--- /dev/null
+++ b/target/linux/ramips/mt7620a/config-3.9
@@ -0,0 +1,172 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_MT7620A_EVAL is not set
+# CONFIG_DTB_MT7620A_MT7610E_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MII is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_MT7620=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_GSW_MT7620=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+# CONFIG_OF_DISPLAY_TIMING is not set
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+# CONFIG_OF_VIDEOMODE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_USBPHY=y
+CONFIG_RALINK_WDT=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_MT7620=y
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RALINK=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7620a/profiles/00-default.mk b/target/linux/ramips/mt7620a/profiles/00-default.mk
new file mode 100644
index 0000000000..55ac015bbe
--- /dev/null
+++ b/target/linux/ramips/mt7620a/profiles/00-default.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Default
+	NAME:=Default Profile
+	PACKAGES:=\
+		kmod-usb-core kmod-usb-rt305x-dwc_otg \
+		kmod-ledtrig-usbdev
+endef
+
+define Profile/Default/Description
+	Default package set compatible with most boards.
+endef
+$(eval $(call Profile,Default))
diff --git a/target/linux/ramips/mt7620a/target.mk b/target/linux/ramips/mt7620a/target.mk
new file mode 100644
index 0000000000..4d4dd28ae9
--- /dev/null
+++ b/target/linux/ramips/mt7620a/target.mk
@@ -0,0 +1,14 @@
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+
+SUBTARGET:=mt7620a
+BOARDNAME:=MT7620a based boards
+ARCH_PACKAGES:=ramips_24kec
+FEATURES+=usb
+CFLAGS+= -march=24kec -mdsp
+
+define Target/Description
+	Build firmware images for Ralink MT7620a based boards.
+endef
+
diff --git a/target/linux/ramips/patches-3.8/0001-MIPS-ralink-adds-include-files.patch b/target/linux/ramips/patches-3.8/0001-MIPS-ralink-adds-include-files.patch
index 3539ece0c7..cc32caa9c2 100644
--- a/target/linux/ramips/patches-3.8/0001-MIPS-ralink-adds-include-files.patch
+++ b/target/linux/ramips/patches-3.8/0001-MIPS-ralink-adds-include-files.patch
@@ -1,7 +1,7 @@
-From 8563991026ee98bb5e477167236972a45dfea0e3 Mon Sep 17 00:00:00 2001
+From 72bd3fcd16225f46ca318435a4d8f3f3f154b1bc Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Mon, 21 Jan 2013 18:25:59 +0100
-Subject: [PATCH 01/14] MIPS: ralink: adds include files
+Subject: [PATCH 01/79] MIPS: ralink: adds include files
 
 Before we start adding the platform code we add the common include files.
 
@@ -17,6 +17,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4893/
  create mode 100644 arch/mips/include/asm/mach-ralink/war.h
  create mode 100644 arch/mips/ralink/common.h
 
+diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
+new file mode 100644
+index 0000000..5a508f9
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
 @@ -0,0 +1,39 @@
@@ -59,6 +62,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4893/
 +}
 +
 +#endif /* _RALINK_REGS_H_ */
+diff --git a/arch/mips/include/asm/mach-ralink/war.h b/arch/mips/include/asm/mach-ralink/war.h
+new file mode 100644
+index 0000000..a7b712c
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/war.h
 @@ -0,0 +1,25 @@
@@ -87,6 +93,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4893/
 +#define MIPS34K_MISSED_ITLB_WAR		0
 +
 +#endif /* __ASM_MACH_RALINK_WAR_H */
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+new file mode 100644
+index 0000000..3009903
 --- /dev/null
 +++ b/arch/mips/ralink/common.h
 @@ -0,0 +1,44 @@
@@ -134,3 +143,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4893/
 +__iomem void *plat_of_remap_node(const char *node);
 +
 +#endif /* _RALINK_COMMON_H__ */
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0002-MIPS-ralink-adds-irq-code.patch b/target/linux/ramips/patches-3.8/0002-MIPS-ralink-adds-irq-code.patch
index c559a8767d..01beef7730 100644
--- a/target/linux/ramips/patches-3.8/0002-MIPS-ralink-adds-irq-code.patch
+++ b/target/linux/ramips/patches-3.8/0002-MIPS-ralink-adds-irq-code.patch
@@ -1,7 +1,7 @@
-From 19d3814e7b325f8965fd71f329b3467a97f8d217 Mon Sep 17 00:00:00 2001
+From 833836f47b4191e93267b91fcab38dd15affcd28 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 20 Jan 2013 22:00:50 +0100
-Subject: [PATCH 02/14] MIPS: ralink: adds irq code
+Subject: [PATCH 02/79] MIPS: ralink: adds irq code
 
 All of the Ralink Wifi SoC currently supported by this series share the same
 interrupt controller (INTC).
@@ -14,6 +14,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4890/
  1 file changed, 176 insertions(+)
  create mode 100644 arch/mips/ralink/irq.c
 
+diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
+new file mode 100644
+index 0000000..e62c975
 --- /dev/null
 +++ b/arch/mips/ralink/irq.c
 @@ -0,0 +1,176 @@
@@ -193,3 +196,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4890/
 +	of_irq_init(of_irq_ids);
 +}
 +
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0003-MIPS-ralink-adds-reset-code.patch b/target/linux/ramips/patches-3.8/0003-MIPS-ralink-adds-reset-code.patch
index 57cad76b9e..ee9a509bb5 100644
--- a/target/linux/ramips/patches-3.8/0003-MIPS-ralink-adds-reset-code.patch
+++ b/target/linux/ramips/patches-3.8/0003-MIPS-ralink-adds-reset-code.patch
@@ -1,7 +1,7 @@
-From c06e836ada59fbc6d1109277e693e5b3e056ac12 Mon Sep 17 00:00:00 2001
+From 3cdf3d713c81ffd3032d7c664f0be89d1ddce3e3 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 20 Jan 2013 22:00:57 +0100
-Subject: [PATCH 03/14] MIPS: ralink: adds reset code
+Subject: [PATCH 03/79] MIPS: ralink: adds reset code
 
 Resetting these SoCs requires no real magic. The code is straight forward.
 
@@ -13,6 +13,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4891/
  1 file changed, 44 insertions(+)
  create mode 100644 arch/mips/ralink/reset.c
 
+diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
+new file mode 100644
+index 0000000..22120e5
 --- /dev/null
 +++ b/arch/mips/ralink/reset.c
 @@ -0,0 +1,44 @@
@@ -60,3 +63,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4891/
 +}
 +
 +arch_initcall(mips_reboot_setup);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0004-MIPS-ralink-adds-prom-and-cmdline-code.patch b/target/linux/ramips/patches-3.8/0004-MIPS-ralink-adds-prom-and-cmdline-code.patch
index da38629a75..8b8bb56b38 100644
--- a/target/linux/ramips/patches-3.8/0004-MIPS-ralink-adds-prom-and-cmdline-code.patch
+++ b/target/linux/ramips/patches-3.8/0004-MIPS-ralink-adds-prom-and-cmdline-code.patch
@@ -1,7 +1,7 @@
-From 7e47cefa69c8ed2c889522ce29fcce73ce8cf08e Mon Sep 17 00:00:00 2001
+From 36424b3f1f184c752562d19d0df1a427c8c584a2 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 20 Jan 2013 22:01:05 +0100
-Subject: [PATCH 04/14] MIPS: ralink: adds prom and cmdline code
+Subject: [PATCH 04/79] MIPS: ralink: adds prom and cmdline code
 
 Add minimal code to handle commandlines.
 
@@ -13,6 +13,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4892/
  1 file changed, 69 insertions(+)
  create mode 100644 arch/mips/ralink/prom.c
 
+diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
+new file mode 100644
+index 0000000..9c64f02
 --- /dev/null
 +++ b/arch/mips/ralink/prom.c
 @@ -0,0 +1,69 @@
@@ -85,3 +88,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4892/
 +void __init prom_free_prom_memory(void)
 +{
 +}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0005-MIPS-ralink-adds-clkdev-code.patch b/target/linux/ramips/patches-3.8/0005-MIPS-ralink-adds-clkdev-code.patch
index a8218d1c6d..1fd60578d0 100644
--- a/target/linux/ramips/patches-3.8/0005-MIPS-ralink-adds-clkdev-code.patch
+++ b/target/linux/ramips/patches-3.8/0005-MIPS-ralink-adds-clkdev-code.patch
@@ -1,7 +1,7 @@
-From 3f0a06b0368d25608841843e9d65a7289ad9f14a Mon Sep 17 00:00:00 2001
+From b99289db258ee8a84e1bd555b2897476acf390c1 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 20 Jan 2013 22:01:29 +0100
-Subject: [PATCH 05/14] MIPS: ralink: adds clkdev code
+Subject: [PATCH 05/79] MIPS: ralink: adds clkdev code
 
 These SoCs have a limited number of fixed rate clocks. Add support for the
 clk and clkdev api.
@@ -14,6 +14,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4894/
  1 file changed, 72 insertions(+)
  create mode 100644 arch/mips/ralink/clk.c
 
+diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
+new file mode 100644
+index 0000000..8dfa22f
 --- /dev/null
 +++ b/arch/mips/ralink/clk.c
 @@ -0,0 +1,72 @@
@@ -89,3 +92,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4894/
 +	mips_hpt_frequency = clk_get_rate(clk) / 2;
 +	clk_put(clk);
 +}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0006-MIPS-ralink-adds-OF-code.patch b/target/linux/ramips/patches-3.8/0006-MIPS-ralink-adds-OF-code.patch
index b6bd78b9ce..7747c819ca 100644
--- a/target/linux/ramips/patches-3.8/0006-MIPS-ralink-adds-OF-code.patch
+++ b/target/linux/ramips/patches-3.8/0006-MIPS-ralink-adds-OF-code.patch
@@ -1,7 +1,7 @@
-From 3a5bfe7bdbfd37c9206d7c6dfd7eb9664ccc5038 Mon Sep 17 00:00:00 2001
+From 4b2f9abbbaf3463a0fc1a65afeb0d12f890ada35 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 20 Jan 2013 22:02:01 +0100
-Subject: [PATCH 06/14] MIPS: ralink: adds OF code
+Subject: [PATCH 06/79] MIPS: ralink: adds OF code
 
 Until there is a generic MIPS way of handing the DTB over from bootloader to
 kernel we rely on a built in devicetrees. The OF code also remaps those register
@@ -15,6 +15,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4895/
  1 file changed, 107 insertions(+)
  create mode 100644 arch/mips/ralink/of.c
 
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+new file mode 100644
+index 0000000..4165e70
 --- /dev/null
 +++ b/arch/mips/ralink/of.c
 @@ -0,0 +1,107 @@
@@ -125,3 +128,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4895/
 +}
 +
 +arch_initcall(plat_of_setup);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0007-MIPS-ralink-adds-early_printk-support.patch b/target/linux/ramips/patches-3.8/0007-MIPS-ralink-adds-early_printk-support.patch
index 80a5b1ea34..e22bbbdf0f 100644
--- a/target/linux/ramips/patches-3.8/0007-MIPS-ralink-adds-early_printk-support.patch
+++ b/target/linux/ramips/patches-3.8/0007-MIPS-ralink-adds-early_printk-support.patch
@@ -1,7 +1,7 @@
-From 5fff610b7c60195de98e68bec00c357f393ce634 Mon Sep 17 00:00:00 2001
+From 4efba82d0e4059588f2b2fc0ac2576eaf37f1d22 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 20 Jan 2013 22:02:55 +0100
-Subject: [PATCH 07/14] MIPS: ralink: adds early_printk support
+Subject: [PATCH 07/79] MIPS: ralink: adds early_printk support
 
 Add the code needed to make early printk work.
 
@@ -13,6 +13,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4897/
  1 file changed, 44 insertions(+)
  create mode 100644 arch/mips/ralink/early_printk.c
 
+diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
+new file mode 100644
+index 0000000..c4ae47e
 --- /dev/null
 +++ b/arch/mips/ralink/early_printk.c
 @@ -0,0 +1,44 @@
@@ -60,3 +63,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4897/
 +	while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
 +		;
 +}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0008-MIPS-ralink-adds-support-for-RT305x-SoC-family.patch b/target/linux/ramips/patches-3.8/0008-MIPS-ralink-adds-support-for-RT305x-SoC-family.patch
index 083526b36d..01b0869ad1 100644
--- a/target/linux/ramips/patches-3.8/0008-MIPS-ralink-adds-support-for-RT305x-SoC-family.patch
+++ b/target/linux/ramips/patches-3.8/0008-MIPS-ralink-adds-support-for-RT305x-SoC-family.patch
@@ -1,7 +1,7 @@
-From 2809b31770d7fd934a748692e1922a5e613f06e5 Mon Sep 17 00:00:00 2001
+From 433f4f524aba81358353ca4ebc00c3e916521ec6 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 20 Jan 2013 22:03:46 +0100
-Subject: [PATCH 08/14] MIPS: ralink: adds support for RT305x SoC family
+Subject: [PATCH 08/79] MIPS: ralink: adds support for RT305x SoC family
 
 Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC.
 
@@ -17,6 +17,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4896/
  create mode 100644 arch/mips/include/asm/mach-ralink/rt305x.h
  create mode 100644 arch/mips/ralink/rt305x.c
 
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
+new file mode 100644
+index 0000000..7d344f2
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/rt305x.h
 @@ -0,0 +1,139 @@
@@ -159,6 +162,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4896/
 +#define RT305X_GPIO_MODE_RGMII		BIT(9)
 +
 +#endif
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+new file mode 100644
+index 0000000..0a4bbdc
 --- /dev/null
 +++ b/arch/mips/ralink/rt305x.c
 @@ -0,0 +1,242 @@
@@ -404,3 +410,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4896/
 +		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
 +		(id & CHIP_ID_REV_MASK));
 +}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0009-MIPS-ralink-adds-rt305x-devicetree.patch b/target/linux/ramips/patches-3.8/0009-MIPS-ralink-adds-rt305x-devicetree.patch
index 2c2bb14e16..81d9feac9e 100644
--- a/target/linux/ramips/patches-3.8/0009-MIPS-ralink-adds-rt305x-devicetree.patch
+++ b/target/linux/ramips/patches-3.8/0009-MIPS-ralink-adds-rt305x-devicetree.patch
@@ -1,7 +1,7 @@
-From 5644da4f635a30fc03b4f12d81b2197d716d9cef Mon Sep 17 00:00:00 2001
+From 8208a43c301d9164802dedeec7455dbdd70ca286 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Tue, 22 Jan 2013 20:19:33 +0100
-Subject: [PATCH 09/14] MIPS: ralink: adds rt305x devicetree
+Subject: [PATCH 09/79] MIPS: ralink: adds rt305x devicetree
 
 This adds the devicetree file that describes the rt305x evaluation kit.
 
@@ -15,6 +15,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4898/
  create mode 100644 arch/mips/ralink/dts/rt3050.dtsi
  create mode 100644 arch/mips/ralink/dts/rt3052_eval.dts
 
+diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
+new file mode 100644
+index 0000000..fd49daa
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt3050.dtsi
 @@ -0,0 +1,96 @@
@@ -114,6 +117,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4898/
 +		};
 +	};
 +};
+diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
+new file mode 100644
+index 0000000..dc56e58
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt3052_eval.dts
 @@ -0,0 +1,52 @@
@@ -169,3 +175,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4898/
 +		};
 +	};
 +};
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0010-MIPS-ralink-adds-Kbuild-files.patch b/target/linux/ramips/patches-3.8/0010-MIPS-ralink-adds-Kbuild-files.patch
index bccc3b87d9..88c018c719 100644
--- a/target/linux/ramips/patches-3.8/0010-MIPS-ralink-adds-Kbuild-files.patch
+++ b/target/linux/ramips/patches-3.8/0010-MIPS-ralink-adds-Kbuild-files.patch
@@ -1,7 +1,7 @@
-From ae2b5bb6570481b50a7175c64176b82da0a81836 Mon Sep 17 00:00:00 2001
+From 79e69b7a01246e945448039f7dce170eef0b6e3b Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 20 Jan 2013 22:05:30 +0100
-Subject: [PATCH 10/14] MIPS: ralink: adds Kbuild files
+Subject: [PATCH 10/79] MIPS: ralink: adds Kbuild files
 
 Add the Kbuild symbols and Makefiles needed to actually build the ralink code
 from this series
@@ -22,6 +22,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
  create mode 100644 arch/mips/ralink/Platform
  create mode 100644 arch/mips/ralink/dts/Makefile
 
+diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
+index 91b9d69..9a73ce6 100644
 --- a/arch/mips/Kbuild.platforms
 +++ b/arch/mips/Kbuild.platforms
 @@ -22,6 +22,7 @@ platforms += pmc-sierra
@@ -32,6 +34,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
  platforms += rb532
  platforms += sgi-ip22
  platforms += sgi-ip27
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 2ac626a..b5081b5 100644
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
 @@ -434,6 +434,22 @@ config POWERTV
@@ -65,6 +69,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
  source "arch/mips/sgi-ip27/Kconfig"
  source "arch/mips/sibyte/Kconfig"
  source "arch/mips/txx9/Kconfig"
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+new file mode 100644
+index 0000000..a0b0197
 --- /dev/null
 +++ b/arch/mips/ralink/Kconfig
 @@ -0,0 +1,32 @@
@@ -100,6 +107,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
 +endchoice
 +
 +endif
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+new file mode 100644
+index 0000000..939757f
 --- /dev/null
 +++ b/arch/mips/ralink/Makefile
 @@ -0,0 +1,15 @@
@@ -118,6 +128,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
 +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 +
 +obj-y += dts/
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+new file mode 100644
+index 0000000..6babd65
 --- /dev/null
 +++ b/arch/mips/ralink/Platform
 @@ -0,0 +1,10 @@
@@ -131,7 +144,13 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
 +# Ralink RT305x
 +#
 +load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+new file mode 100644
+index 0000000..1a69fb3
 --- /dev/null
 +++ b/arch/mips/ralink/dts/Makefile
 @@ -0,0 +1 @@
 +obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0011-MIPS-ralink-adds-default-config-file.patch b/target/linux/ramips/patches-3.8/0011-MIPS-ralink-adds-default-config-file.patch
index 5998b1130b..1f4a1e2b2c 100644
--- a/target/linux/ramips/patches-3.8/0011-MIPS-ralink-adds-default-config-file.patch
+++ b/target/linux/ramips/patches-3.8/0011-MIPS-ralink-adds-default-config-file.patch
@@ -1,7 +1,7 @@
-From 6d63d70f9fe4c1b3d293ac3b9d2fcaf937d95cea Mon Sep 17 00:00:00 2001
+From 428bb7af86ffb6171e11c36dfcdacd87ed5341e6 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 1 Feb 2013 12:50:49 +0100
-Subject: [PATCH 11/14] MIPS: ralink: adds default config file
+Subject: [PATCH 11/79] MIPS: ralink: adds default config file
 
 Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
@@ -9,6 +9,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  1 file changed, 167 insertions(+)
  create mode 100644 arch/mips/configs/rt305x_defconfig
 
+diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
+new file mode 100644
+index 0000000..d1741bc
 --- /dev/null
 +++ b/arch/mips/configs/rt305x_defconfig
 @@ -0,0 +1,167 @@
@@ -179,3 +182,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +# CONFIG_XZ_DEC_ARMTHUMB is not set
 +# CONFIG_XZ_DEC_SPARC is not set
 +CONFIG_AVERAGE=y
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0012-Document-devicetree-add-OF-documents-for-MIPS-interr.patch b/target/linux/ramips/patches-3.8/0012-Document-devicetree-add-OF-documents-for-MIPS-interr.patch
index 6a07d8de03..b7ce7c9427 100644
--- a/target/linux/ramips/patches-3.8/0012-Document-devicetree-add-OF-documents-for-MIPS-interr.patch
+++ b/target/linux/ramips/patches-3.8/0012-Document-devicetree-add-OF-documents-for-MIPS-interr.patch
@@ -1,7 +1,7 @@
-From dcc7310e144c3bf17a86d2f058d60fb525d4b34a Mon Sep 17 00:00:00 2001
+From dae867771332e7541783ebb6bacf33356ad449b3 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Thu, 31 Jan 2013 13:44:10 +0100
-Subject: [PATCH 12/14] Document: devicetree: add OF documents for MIPS
+Subject: [PATCH 12/79] Document: devicetree: add OF documents for MIPS
  interrupt controller
 
 Signed-off-by: John Crispin <blogic@openwrt.org>
@@ -12,6 +12,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4901/
  1 file changed, 47 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/mips/cpu_irq.txt
 
+diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
+new file mode 100644
+index 0000000..13aa4b6
 --- /dev/null
 +++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
 @@ -0,0 +1,47 @@
@@ -62,3 +65,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4901/
 +{
 +	of_irq_init(of_irq_ids);
 +}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0013-MIPS-add-irqdomain-support-for-the-CPU-IRQ-controlle.patch b/target/linux/ramips/patches-3.8/0013-MIPS-add-irqdomain-support-for-the-CPU-IRQ-controlle.patch
index 3139106763..e5387a2569 100644
--- a/target/linux/ramips/patches-3.8/0013-MIPS-add-irqdomain-support-for-the-CPU-IRQ-controlle.patch
+++ b/target/linux/ramips/patches-3.8/0013-MIPS-add-irqdomain-support-for-the-CPU-IRQ-controlle.patch
@@ -1,7 +1,7 @@
-From 0916b46962cbcac9465d253d0a398435b3965fd5 Mon Sep 17 00:00:00 2001
+From 65e39f763eeca6fb93f48ed5a9b296277a543429 Mon Sep 17 00:00:00 2001
 From: Gabor Juhos <juhosg@openwrt.org>
 Date: Thu, 31 Jan 2013 12:20:43 +0000
-Subject: [PATCH 13/14] MIPS: add irqdomain support for the CPU IRQ controller
+Subject: [PATCH 13/79] MIPS: add irqdomain support for the CPU IRQ controller
 
 Add code to load a irq_domain for the MIPS IRQ controller from a devicetree
 file.
@@ -15,6 +15,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/4902/
  arch/mips/kernel/irq_cpu.c      |   42 +++++++++++++++++++++++++++++++++++++++
  2 files changed, 48 insertions(+)
 
+diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h
+index ef6a07c..3f11fdb 100644
 --- a/arch/mips/include/asm/irq_cpu.h
 +++ b/arch/mips/include/asm/irq_cpu.h
 @@ -17,4 +17,10 @@ extern void mips_cpu_irq_init(void);
@@ -28,6 +30,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/4902/
 +#endif
 +
  #endif /* _ASM_IRQ_CPU_H */
+diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
+index 972263b..49bc9ca 100644
 --- a/arch/mips/kernel/irq_cpu.c
 +++ b/arch/mips/kernel/irq_cpu.c
 @@ -31,6 +31,7 @@
@@ -83,3 +87,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4902/
 +	return 0;
 +}
 +#endif /* CONFIG_IRQ_DOMAIN */
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0014-MIPS-ralink-add-CPU-interrupt-controller-to-of_irq_i.patch b/target/linux/ramips/patches-3.8/0014-MIPS-ralink-add-CPU-interrupt-controller-to-of_irq_i.patch
index e9e2f56d3a..e346131b0a 100644
--- a/target/linux/ramips/patches-3.8/0014-MIPS-ralink-add-CPU-interrupt-controller-to-of_irq_i.patch
+++ b/target/linux/ramips/patches-3.8/0014-MIPS-ralink-add-CPU-interrupt-controller-to-of_irq_i.patch
@@ -1,7 +1,7 @@
-From d3d2b4200b5a42851365e903d101f8f0882eb9eb Mon Sep 17 00:00:00 2001
+From 9afd2ba44145009578d9d445183480a698cc04f2 Mon Sep 17 00:00:00 2001
 From: Gabor Juhos <juhosg@openwrt.org>
 Date: Thu, 31 Jan 2013 20:43:30 +0100
-Subject: [PATCH 14/14] MIPS: ralink: add CPU interrupt controller to
+Subject: [PATCH 14/79] MIPS: ralink: add CPU interrupt controller to
  of_irq_ids
 
 Convert the ralink IRQ code to make use of the new MIPS IRQ controller OF
@@ -16,6 +16,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
  arch/mips/ralink/irq.c           |   10 +++++++---
  2 files changed, 17 insertions(+), 3 deletions(-)
 
+diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
+index fd49daa..069d066 100644
 --- a/arch/mips/ralink/dts/rt3050.dtsi
 +++ b/arch/mips/ralink/dts/rt3050.dtsi
 @@ -13,6 +13,13 @@
@@ -42,9 +44,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
  		};
  
  		memc@300 {
+diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
+index e62c975..6d054c5 100644
 --- a/arch/mips/ralink/irq.c
 +++ b/arch/mips/ralink/irq.c
-@@ -128,8 +128,11 @@ static int __init intc_of_init(struct de
+@@ -128,8 +128,11 @@ static int __init intc_of_init(struct device_node *node,
  {
  	struct resource res;
  	struct irq_domain *domain;
@@ -57,7 +61,7 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
  
  	if (of_address_to_resource(node, 0, &res))
  		panic("Failed to get intc memory range");
-@@ -156,8 +159,8 @@ static int __init intc_of_init(struct de
+@@ -156,8 +159,8 @@ static int __init intc_of_init(struct device_node *node,
  
  	rt_intc_w32(INTC_INT_GLOBAL, INTC_REG_ENABLE);
  
@@ -68,7 +72,7 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
  
  	cp0_perfcount_irq = irq_create_mapping(domain, 9);
  
-@@ -165,6 +168,7 @@ static int __init intc_of_init(struct de
+@@ -165,6 +168,7 @@ static int __init intc_of_init(struct device_node *node,
  }
  
  static struct of_device_id __initdata of_irq_ids[] = {
@@ -76,3 +80,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
  	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
  	{},
  };
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0015-serial-ralink-adds-support-for-the-serial-core-found.patch b/target/linux/ramips/patches-3.8/0015-serial-ralink-adds-support-for-the-serial-core-found.patch
index 38ef41abf7..b995422d13 100644
--- a/target/linux/ramips/patches-3.8/0015-serial-ralink-adds-support-for-the-serial-core-found.patch
+++ b/target/linux/ramips/patches-3.8/0015-serial-ralink-adds-support-for-the-serial-core-found.patch
@@ -1,8 +1,8 @@
-From c420811f117a59a4a7d4e34b362437b91c7fafa1 Mon Sep 17 00:00:00 2001
+From 219ec2244c2e9085e6900dc515a24f6655c79827 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 25 Jan 2013 19:39:51 +0100
-Subject: [PATCH] serial: ralink: adds support for the serial core found on
- ralink wisoc
+Subject: [PATCH 15/79] serial: ralink: adds support for the serial core found
+ on ralink wisoc
 
 The MIPS based Ralink WiSoC platform has 1 or more 8250 compatible serial cores.
 To make them work we require the same quirks that are used by AU1x00.
@@ -15,9 +15,11 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
  include/linux/serial_core.h     |    2 +-
  3 files changed, 12 insertions(+), 4 deletions(-)
 
+diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
+index f932043..f72eb7d 100644
 --- a/drivers/tty/serial/8250/8250.c
 +++ b/drivers/tty/serial/8250/8250.c
-@@ -345,9 +345,9 @@ static void default_serial_dl_write(stru
+@@ -324,9 +324,9 @@ static void default_serial_dl_write(struct uart_8250_port *up, int value)
  	serial_out(up, UART_DLM, value >> 8 & 0xff);
  }
  
@@ -29,7 +31,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
  static const u8 au_io_in_map[] = {
  	[UART_RX]  = 0,
  	[UART_IER] = 2,
-@@ -527,7 +527,7 @@ static void set_io_from_upio(struct uart
+@@ -506,7 +506,7 @@ static void set_io_from_upio(struct uart_port *p)
  		break;
  #endif
  
@@ -38,6 +40,8 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
  	case UPIO_AU:
  		p->serial_in = au_serial_in;
  		p->serial_out = au_serial_out;
+diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
+index c31133a..9e4febd 100644
 --- a/drivers/tty/serial/8250/Kconfig
 +++ b/drivers/tty/serial/8250/Kconfig
 @@ -277,3 +277,11 @@ config SERIAL_8250_EM
@@ -52,6 +56,8 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 +	  If you have a Ralink RT288x/RT305x SoC based board and want to use the
 +	  serial port, say Y to this option. The driver can handle up to 2 serial
 +	  ports. If unsure, say N.
+diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
+index c6690a2..0b428d6 100644
 --- a/include/linux/serial_core.h
 +++ b/include/linux/serial_core.h
 @@ -134,7 +134,7 @@ struct uart_port {
@@ -63,3 +69,6 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
  #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
  #define UPIO_RM9000		(6)			/* RM9000 type IO */
  
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0016-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch b/target/linux/ramips/patches-3.8/0016-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch
new file mode 100644
index 0000000000..8886cd791a
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0016-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch
@@ -0,0 +1,167 @@
+From 231e989ef4a11073ad6be8af797f96d51256d07a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 11 Apr 2013 05:34:59 +0000
+Subject: [PATCH 16/79] MIPS: move mips_{set,get}_machine_name() to a more
+ generic place
+
+Previously this functionality was only available to users of the mips_machine
+api. Moving the code to prom.c allows us to also add a OF wrapper.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5164/
+---
+ arch/mips/include/asm/mips_machine.h |    4 ----
+ arch/mips/include/asm/prom.h         |    3 +++
+ arch/mips/kernel/mips_machine.c      |   21 ---------------------
+ arch/mips/kernel/proc.c              |    2 +-
+ arch/mips/kernel/prom.c              |   31 +++++++++++++++++++++++++++++++
+ 5 files changed, 35 insertions(+), 26 deletions(-)
+
+diff --git a/arch/mips/include/asm/mips_machine.h b/arch/mips/include/asm/mips_machine.h
+index 363bb35..9d00aeb 100644
+--- a/arch/mips/include/asm/mips_machine.h
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -42,13 +42,9 @@ extern long __mips_machines_end;
+ #ifdef CONFIG_MIPS_MACHINE
+ int  mips_machtype_setup(char *id) __init;
+ void mips_machine_setup(void) __init;
+-void mips_set_machine_name(const char *name) __init;
+-char *mips_get_machine_name(void);
+ #else
+ static inline int mips_machtype_setup(char *id) { return 1; }
+ static inline void mips_machine_setup(void) { }
+-static inline void mips_set_machine_name(const char *name) { }
+-static inline char *mips_get_machine_name(void) { return NULL; }
+ #endif /* CONFIG_MIPS_MACHINE */
+ 
+ #endif /* __ASM_MIPS_MACHINE_H */
+diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
+index 8808bf5..1e7e096 100644
+--- a/arch/mips/include/asm/prom.h
++++ b/arch/mips/include/asm/prom.h
+@@ -48,4 +48,7 @@ extern void __dt_setup_arch(struct boot_param_header *bph);
+ static inline void device_tree_init(void) { }
+ #endif /* CONFIG_OF */
+ 
++extern char *mips_get_machine_name(void);
++extern void mips_set_machine_name(const char *name);
++
+ #endif /* __ASM_PROM_H */
+diff --git a/arch/mips/kernel/mips_machine.c b/arch/mips/kernel/mips_machine.c
+index 411a058..6dc5866 100644
+--- a/arch/mips/kernel/mips_machine.c
++++ b/arch/mips/kernel/mips_machine.c
+@@ -13,7 +13,6 @@
+ #include <asm/mips_machine.h>
+ 
+ static struct mips_machine *mips_machine __initdata;
+-static char *mips_machine_name = "Unknown";
+ 
+ #define for_each_machine(mach) \
+ 	for ((mach) = (struct mips_machine *)&__mips_machines_start; \
+@@ -21,25 +20,6 @@ static char *mips_machine_name = "Unknown";
+ 	     (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \
+ 	     (mach)++)
+ 
+-__init void mips_set_machine_name(const char *name)
+-{
+-	char *p;
+-
+-	if (name == NULL)
+-		return;
+-
+-	p = kstrdup(name, GFP_KERNEL);
+-	if (!p)
+-		pr_err("MIPS: no memory for machine_name\n");
+-
+-	mips_machine_name = p;
+-}
+-
+-char *mips_get_machine_name(void)
+-{
+-	return mips_machine_name;
+-}
+-
+ __init int mips_machtype_setup(char *id)
+ {
+ 	struct mips_machine *mach;
+@@ -79,7 +59,6 @@ __init void mips_machine_setup(void)
+ 		return;
+ 
+ 	mips_set_machine_name(mips_machine->mach_name);
+-	pr_info("MIPS: machine is %s\n", mips_machine_name);
+ 
+ 	if (mips_machine->mach_setup)
+ 		mips_machine->mach_setup();
+diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
+index 07dff54..8779237 100644
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -12,7 +12,7 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsregs.h>
+ #include <asm/processor.h>
+-#include <asm/mips_machine.h>
++#include <asm/prom.h>
+ 
+ unsigned int vced_count, vcei_count;
+ 
+diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
+index 028f6f8..b68e53b 100644
+--- a/arch/mips/kernel/prom.c
++++ b/arch/mips/kernel/prom.c
+@@ -23,6 +23,22 @@
+ #include <asm/page.h>
+ #include <asm/prom.h>
+ 
++static char mips_machine_name[64] = "Unknown";
++
++__init void mips_set_machine_name(const char *name)
++{
++	if (name == NULL)
++		return;
++
++	strncpy(mips_machine_name, name, sizeof(mips_machine_name));
++	pr_info("MIPS: machine is %s\n", mips_get_machine_name());
++}
++
++char *mips_get_machine_name(void)
++{
++	return mips_machine_name;
++}
++
+ int __init early_init_dt_scan_memory_arch(unsigned long node,
+ 					  const char *uname, int depth,
+ 					  void *data)
+@@ -50,6 +66,18 @@ void __init early_init_dt_setup_initrd_arch(unsigned long start,
+ }
+ #endif
+ 
++int __init early_init_dt_scan_model(unsigned long node,	const char *uname,
++				    int depth, void *data)
++{
++	if (!depth) {
++		char *model = of_get_flat_dt_prop(node, "model", NULL);
++
++		if (model)
++			mips_set_machine_name(model);
++	}
++	return 0;
++}
++
+ void __init early_init_devtree(void *params)
+ {
+ 	/* Setup flat device-tree pointer */
+@@ -65,6 +93,9 @@ void __init early_init_devtree(void *params)
+ 	/* Scan memory nodes */
+ 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
+ 	of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
++
++	/* try to load the mips machine name */
++	of_scan_flat_dt(early_init_dt_scan_model, NULL);
+ }
+ 
+ void __init __dt_setup_arch(struct boot_param_header *bph)
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0101-MIPS-ralink-add-PCI-IRQ-handling.patch b/target/linux/ramips/patches-3.8/0017-MIPS-ralink-add-PCI-IRQ-handling.patch
index bdb5cfc574..c18817e54d 100644
--- a/target/linux/ramips/patches-3.8/0101-MIPS-ralink-add-PCI-IRQ-handling.patch
+++ b/target/linux/ramips/patches-3.8/0017-MIPS-ralink-add-PCI-IRQ-handling.patch
@@ -1,7 +1,7 @@
-From 16d9eaf22f30ed0b0deddfe8e11426889ccdb556 Mon Sep 17 00:00:00 2001
+From 98ab228172e66e43766d9e2a0ddb73603c22dbd1 Mon Sep 17 00:00:00 2001
 From: Gabor Juhos <juhosg@openwrt.org>
 Date: Wed, 10 Apr 2013 09:07:27 +0200
-Subject: [PATCH 101/137] MIPS: ralink: add PCI IRQ handling
+Subject: [PATCH 17/79] MIPS: ralink: add PCI IRQ handling
 
 The Ralink IRQ code was not handling the PCI IRQ yet. Add this functionaility
 to make PCI work on rt3883.
@@ -13,6 +13,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5165/
  arch/mips/ralink/irq.c |    4 ++++
  1 file changed, 4 insertions(+)
 
+diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
+index 6d054c5..d9807d0 100644
 --- a/arch/mips/ralink/irq.c
 +++ b/arch/mips/ralink/irq.c
 @@ -31,6 +31,7 @@
@@ -33,3 +35,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5165/
  	else if (pending & STATUSF_IP2)
  		do_IRQ(RALINK_CPU_IRQ_INTC);
  
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0018-MIPS-ralink-add-RT3352-register-defines.patch b/target/linux/ramips/patches-3.8/0018-MIPS-ralink-add-RT3352-register-defines.patch
new file mode 100644
index 0000000000..1a8950fcd6
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0018-MIPS-ralink-add-RT3352-register-defines.patch
@@ -0,0 +1,40 @@
+From 8667d984d1b4f3be1c5da71788762b9945a25c90 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 21 Mar 2013 19:01:49 +0100
+Subject: [PATCH 18/79] MIPS: ralink: add RT3352 register defines
+
+Add a few missing defines that are needed to make USB and clock detection work
+on the RT3352.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5166/
+---
+ arch/mips/include/asm/mach-ralink/rt305x.h |   13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
+index 7d344f2..e36c3c5 100644
+--- a/arch/mips/include/asm/mach-ralink/rt305x.h
++++ b/arch/mips/include/asm/mach-ralink/rt305x.h
+@@ -136,4 +136,17 @@ static inline int soc_is_rt5350(void)
+ #define RT305X_GPIO_MODE_SDRAM		BIT(8)
+ #define RT305X_GPIO_MODE_RGMII		BIT(9)
+ 
++#define RT3352_SYSC_REG_SYSCFG0		0x010
++#define RT3352_SYSC_REG_SYSCFG1         0x014
++#define RT3352_SYSC_REG_CLKCFG1         0x030
++#define RT3352_SYSC_REG_RSTCTRL         0x034
++#define RT3352_SYSC_REG_USB_PS          0x05c
++
++#define RT3352_CLKCFG0_XTAL_SEL		BIT(20)
++#define RT3352_CLKCFG1_UPHY0_CLK_EN	BIT(18)
++#define RT3352_CLKCFG1_UPHY1_CLK_EN	BIT(20)
++#define RT3352_RSTCTRL_UHST		BIT(22)
++#define RT3352_RSTCTRL_UDEV		BIT(25)
++#define RT3352_SYSCFG1_USB0_HOST_MODE	BIT(10)
++
+ #endif
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0103-MIPS-ralink-fix-RT305x-clock-setup.patch b/target/linux/ramips/patches-3.8/0019-MIPS-ralink-fix-RT305x-clock-setup.patch
index 7d682e75bd..ebecdf2629 100644
--- a/target/linux/ramips/patches-3.8/0103-MIPS-ralink-fix-RT305x-clock-setup.patch
+++ b/target/linux/ramips/patches-3.8/0019-MIPS-ralink-fix-RT305x-clock-setup.patch
@@ -1,7 +1,7 @@
-From 845f786c561c0991d9b4088a2d77b8fd4831d487 Mon Sep 17 00:00:00 2001
+From 853823a469a8123657bf32bc5e1843c40529a20d Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 22 Mar 2013 19:25:59 +0100
-Subject: [PATCH 103/137] MIPS: ralink: fix RT305x clock setup
+Subject: [PATCH 19/79] MIPS: ralink: fix RT305x clock setup
 
 Add a few missing clocks.
 
@@ -12,6 +12,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5167/
  arch/mips/ralink/rt305x.c |   12 ++++++++++++
  1 file changed, 12 insertions(+)
 
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index 0a4bbdc..5d49a54 100644
 --- a/arch/mips/ralink/rt305x.c
 +++ b/arch/mips/ralink/rt305x.c
 @@ -124,6 +124,8 @@ struct ralink_pinmux gpio_pinmux = {
@@ -45,3 +47,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5167/
  }
  
  void __init ralink_of_remap(void)
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0020-MIPS-ralink-add-missing-comment-in-irq-driver.patch b/target/linux/ramips/patches-3.8/0020-MIPS-ralink-add-missing-comment-in-irq-driver.patch
new file mode 100644
index 0000000000..51cfe0c4db
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0020-MIPS-ralink-add-missing-comment-in-irq-driver.patch
@@ -0,0 +1,29 @@
+From 7c268f1b47669be2efce1607ee02193cb49424cf Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 16 Mar 2013 16:28:54 +0100
+Subject: [PATCH 20/79] MIPS: ralink: add missing comment in irq driver
+
+Trivial patch that adds a comment that makes the code more readable.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5168/
+---
+ arch/mips/ralink/irq.c |    1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
+index d9807d0..320b1f1 100644
+--- a/arch/mips/ralink/irq.c
++++ b/arch/mips/ralink/irq.c
+@@ -166,6 +166,7 @@ static int __init intc_of_init(struct device_node *node,
+ 	irq_set_chained_handler(irq, ralink_intc_irq_handler);
+ 	irq_set_handler_data(irq, domain);
+ 
++	/* tell the kernel which irq is used for performance monitoring */
+ 	cp0_perfcount_irq = irq_create_mapping(domain, 9);
+ 
+ 	return 0;
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0021-MIPS-ralink-add-RT5350-sdram-register-defines.patch b/target/linux/ramips/patches-3.8/0021-MIPS-ralink-add-RT5350-sdram-register-defines.patch
new file mode 100644
index 0000000000..8ecaea20ab
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0021-MIPS-ralink-add-RT5350-sdram-register-defines.patch
@@ -0,0 +1,37 @@
+From 0df8c2fdd0fe1095b834fbf2b098d6f1b3e56608 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 25 Mar 2013 11:19:58 +0100
+Subject: [PATCH 21/79] MIPS: ralink: add RT5350 sdram register defines
+
+Add a few missing defines that are needed to make memory detection work on the
+RT5350.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5169/
+---
+ arch/mips/include/asm/mach-ralink/rt305x.h |    8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
+index e36c3c5..80cda8a 100644
+--- a/arch/mips/include/asm/mach-ralink/rt305x.h
++++ b/arch/mips/include/asm/mach-ralink/rt305x.h
+@@ -97,6 +97,14 @@ static inline int soc_is_rt5350(void)
+ #define RT5350_SYSCFG0_CPUCLK_320	0x2
+ #define RT5350_SYSCFG0_CPUCLK_300	0x3
+ 
++#define RT5350_SYSCFG0_DRAM_SIZE_SHIFT  12
++#define RT5350_SYSCFG0_DRAM_SIZE_MASK   7
++#define RT5350_SYSCFG0_DRAM_SIZE_2M     0
++#define RT5350_SYSCFG0_DRAM_SIZE_8M     1
++#define RT5350_SYSCFG0_DRAM_SIZE_16M    2
++#define RT5350_SYSCFG0_DRAM_SIZE_32M    3
++#define RT5350_SYSCFG0_DRAM_SIZE_64M    4
++
+ /* multi function gpio pins */
+ #define RT305X_GPIO_I2C_SD		1
+ #define RT305X_GPIO_I2C_SCLK		2
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0022-MIPS-ralink-make-early_printk-work-on-RT2880.patch b/target/linux/ramips/patches-3.8/0022-MIPS-ralink-make-early_printk-work-on-RT2880.patch
new file mode 100644
index 0000000000..27883978d9
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0022-MIPS-ralink-make-early_printk-work-on-RT2880.patch
@@ -0,0 +1,33 @@
+From 9ed190912864c8b96d888af2cb66efcf1dc5562a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 9 Apr 2013 18:31:15 +0200
+Subject: [PATCH 22/79] MIPS: ralink: make early_printk work on RT2880
+
+RT2880 has a different location for the early serial port.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5170/
+---
+ arch/mips/ralink/early_printk.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
+index c4ae47e..b46d041 100644
+--- a/arch/mips/ralink/early_printk.c
++++ b/arch/mips/ralink/early_printk.c
+@@ -11,7 +11,11 @@
+ 
+ #include <asm/addrspace.h>
+ 
++#ifdef CONFIG_SOC_RT288X
++#define EARLY_UART_BASE         0x300c00
++#else
+ #define EARLY_UART_BASE         0x10000c00
++#endif
+ 
+ #define UART_REG_RX             0x00
+ #define UART_REG_TX             0x04
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0023-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch b/target/linux/ramips/patches-3.8/0023-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch
new file mode 100644
index 0000000000..03d95dfb3d
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0023-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch
@@ -0,0 +1,43 @@
+From d5b75031f6ad0f9f82c3b8faeab3cda1cb4ebfe9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 12 Apr 2013 22:12:09 +0200
+Subject: [PATCH 23/79] MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmux
+
+Add proper namespacing to the variable.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5171/
+---
+ arch/mips/ralink/common.h |    2 +-
+ arch/mips/ralink/rt305x.c |    2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index 3009903..f4b19c6 100644
+--- a/arch/mips/ralink/common.h
++++ b/arch/mips/ralink/common.h
+@@ -24,7 +24,7 @@ struct ralink_pinmux {
+ 	int uart_shift;
+ 	void (*wdt_reset)(void);
+ };
+-extern struct ralink_pinmux gpio_pinmux;
++extern struct ralink_pinmux rt_gpio_pinmux;
+ 
+ struct ralink_soc_info {
+ 	unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index 5d49a54..f1a6c33 100644
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -114,7 +114,7 @@ void rt305x_wdt_reset(void)
+ 	rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
+ }
+ 
+-struct ralink_pinmux gpio_pinmux = {
++struct ralink_pinmux rt_gpio_pinmux = {
+ 	.mode = mode_mux,
+ 	.uart = uart_mux,
+ 	.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0024-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch b/target/linux/ramips/patches-3.8/0024-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch
new file mode 100644
index 0000000000..60a8a53a06
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0024-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch
@@ -0,0 +1,49 @@
+From 2793deaf4d3d364ba2ed075abf2b9022a152f253 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 12 Apr 2013 22:16:12 +0200
+Subject: [PATCH 24/79] MIPS: ralink: make the RT305x pinmuxing structure
+ static
+
+These structures are exported via struct ralink_pinmux rt_gpio_pinmux and can
+hence be static.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5172/
+---
+ arch/mips/ralink/rt305x.c |    6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index f1a6c33..5b42078 100644
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -22,7 +22,7 @@
+ 
+ enum rt305x_soc_type rt305x_soc;
+ 
+-struct ralink_pinmux_grp mode_mux[] = {
++static struct ralink_pinmux_grp mode_mux[] = {
+ 	{
+ 		.name = "i2c",
+ 		.mask = RT305X_GPIO_MODE_I2C,
+@@ -61,7 +61,7 @@ struct ralink_pinmux_grp mode_mux[] = {
+ 	}, {0}
+ };
+ 
+-struct ralink_pinmux_grp uart_mux[] = {
++static struct ralink_pinmux_grp uart_mux[] = {
+ 	{
+ 		.name = "uartf",
+ 		.mask = RT305X_GPIO_MODE_UARTF,
+@@ -103,7 +103,7 @@ struct ralink_pinmux_grp uart_mux[] = {
+ 	}, {0}
+ };
+ 
+-void rt305x_wdt_reset(void)
++static void rt305x_wdt_reset(void)
+ {
+ 	u32 t;
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0025-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch b/target/linux/ramips/patches-3.8/0025-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch
new file mode 100644
index 0000000000..368fcde680
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0025-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch
@@ -0,0 +1,31 @@
+From e859bf709e73acb5735cf1207422f53fc3202632 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Fri, 12 Apr 2013 12:40:23 +0200
+Subject: [PATCH 25/79] MIPS: ralink: add pci group to struct ralink_pinmux
+
+This will be used for RT3662/RT3883.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5173/
+---
+ arch/mips/ralink/common.h |    3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index f4b19c6..bebd149 100644
+--- a/arch/mips/ralink/common.h
++++ b/arch/mips/ralink/common.h
+@@ -23,6 +23,9 @@ struct ralink_pinmux {
+ 	struct ralink_pinmux_grp *uart;
+ 	int uart_shift;
+ 	void (*wdt_reset)(void);
++	struct ralink_pinmux_grp *pci;
++	int pci_shift;
++	u32 pci_mask;
+ };
+ extern struct ralink_pinmux rt_gpio_pinmux;
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0026-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch b/target/linux/ramips/patches-3.8/0026-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch
new file mode 100644
index 0000000000..1ee9fd4a5b
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0026-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch
@@ -0,0 +1,56 @@
+From 6e09e0465b342b52ecda583cbc41e6a31c363b3f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 12 Apr 2013 12:45:27 +0200
+Subject: [PATCH 26/79] MIPS: ralink: add uart mask to struct ralink_pinmux
+
+Add a field for the uart muxing mask and set it inside the rt305x setup code.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5744/
+---
+ arch/mips/ralink/common.h |    1 +
+ arch/mips/ralink/rt305x.c |    5 +++--
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index bebd149..299119b 100644
+--- a/arch/mips/ralink/common.h
++++ b/arch/mips/ralink/common.h
+@@ -22,6 +22,7 @@ struct ralink_pinmux {
+ 	struct ralink_pinmux_grp *mode;
+ 	struct ralink_pinmux_grp *uart;
+ 	int uart_shift;
++	u32 uart_mask;
+ 	void (*wdt_reset)(void);
+ 	struct ralink_pinmux_grp *pci;
+ 	int pci_shift;
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index 5b42078..6aa3cb1 100644
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -91,12 +91,12 @@ static struct ralink_pinmux_grp uart_mux[] = {
+ 		.name = "gpio uartf",
+ 		.mask = RT305X_GPIO_MODE_GPIO_UARTF,
+ 		.gpio_first = RT305X_GPIO_7,
+-		.gpio_last = RT305X_GPIO_14,
++		.gpio_last = RT305X_GPIO_10,
+ 	}, {
+ 		.name = "gpio i2s",
+ 		.mask = RT305X_GPIO_MODE_GPIO_I2S,
+ 		.gpio_first = RT305X_GPIO_7,
+-		.gpio_last = RT305X_GPIO_14,
++		.gpio_last = RT305X_GPIO_10,
+ 	}, {
+ 		.name = "gpio",
+ 		.mask = RT305X_GPIO_MODE_GPIO,
+@@ -118,6 +118,7 @@ struct ralink_pinmux rt_gpio_pinmux = {
+ 	.mode = mode_mux,
+ 	.uart = uart_mux,
+ 	.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
++	.uart_mask = RT305X_GPIO_MODE_UART0_MASK,
+ 	.wdt_reset = rt305x_wdt_reset,
+ };
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0027-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch b/target/linux/ramips/patches-3.8/0027-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch
new file mode 100644
index 0000000000..bd8ad22460
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0027-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch
@@ -0,0 +1,281 @@
+From 2a0d9878985bb3274bb61535f76ea293991635a9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jan 2013 09:17:20 +0100
+Subject: [PATCH 27/79] MIPS: ralink: adds support for RT2880 SoC family
+
+Add support code for rt2880 SOC.
+
+The code detects the SoC and registers the clk / pinmux settings.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5176/
+---
+ arch/mips/Kconfig                          |    2 +-
+ arch/mips/include/asm/mach-ralink/rt288x.h |   49 ++++++++++
+ arch/mips/ralink/Kconfig                   |    3 +
+ arch/mips/ralink/Makefile                  |    1 +
+ arch/mips/ralink/Platform                  |    5 +
+ arch/mips/ralink/rt288x.c                  |  139 ++++++++++++++++++++++++++++
+ 6 files changed, 198 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/include/asm/mach-ralink/rt288x.h
+ create mode 100644 arch/mips/ralink/rt288x.c
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index b5081b5..b5fd476 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1177,7 +1177,7 @@ config BOOT_ELF32
+ 
+ config MIPS_L1_CACHE_SHIFT
+ 	int
+-	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
++	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X
+ 	default "6" if MIPS_CPU_SCACHE
+ 	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
+ 	default "5"
+diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h
+new file mode 100644
+index 0000000..ad8b42d
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt288x.h
+@@ -0,0 +1,49 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Parts of this file are based on Ralink's 2.6.21 BSP
++ *
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RT288X_REGS_H_
++#define _RT288X_REGS_H_
++
++#define RT2880_SYSC_BASE		0x00300000
++
++#define SYSC_REG_CHIP_NAME0		0x00
++#define SYSC_REG_CHIP_NAME1		0x04
++#define SYSC_REG_CHIP_ID		0x0c
++#define SYSC_REG_SYSTEM_CONFIG		0x10
++#define SYSC_REG_CLKCFG			0x30
++
++#define RT2880_CHIP_NAME0		0x38325452
++#define RT2880_CHIP_NAME1		0x20203038
++
++#define CHIP_ID_ID_MASK			0xff
++#define CHIP_ID_ID_SHIFT		8
++#define CHIP_ID_REV_MASK		0xff
++
++#define SYSTEM_CONFIG_CPUCLK_SHIFT	20
++#define SYSTEM_CONFIG_CPUCLK_MASK	0x3
++#define SYSTEM_CONFIG_CPUCLK_250	0x0
++#define SYSTEM_CONFIG_CPUCLK_266	0x1
++#define SYSTEM_CONFIG_CPUCLK_280	0x2
++#define SYSTEM_CONFIG_CPUCLK_300	0x3
++
++#define RT2880_GPIO_MODE_I2C		BIT(0)
++#define RT2880_GPIO_MODE_UART0		BIT(1)
++#define RT2880_GPIO_MODE_SPI		BIT(2)
++#define RT2880_GPIO_MODE_UART1		BIT(3)
++#define RT2880_GPIO_MODE_JTAG		BIT(4)
++#define RT2880_GPIO_MODE_MDIO		BIT(5)
++#define RT2880_GPIO_MODE_SDRAM		BIT(6)
++#define RT2880_GPIO_MODE_PCI		BIT(7)
++
++#define CLKCFG_SRAM_CS_N_WDT		BIT(9)
++
++#endif
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index a0b0197..6723b94 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -6,6 +6,9 @@ choice
+ 	help
+ 	  Select Ralink MIPS SoC type.
+ 
++	config SOC_RT288X
++		bool "RT288x"
++
+ 	config SOC_RT305X
+ 		bool "RT305x"
+ 		select USB_ARCH_HAS_HCD
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 939757f..6d826f2 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -8,6 +8,7 @@
+ 
+ obj-y := prom.o of.o reset.o clk.o irq.o
+ 
++obj-$(CONFIG_SOC_RT288X) += rt288x.o
+ obj-$(CONFIG_SOC_RT305X) += rt305x.o
+ 
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+index 6babd65..3f49e51 100644
+--- a/arch/mips/ralink/Platform
++++ b/arch/mips/ralink/Platform
+@@ -5,6 +5,11 @@ core-$(CONFIG_RALINK)		+= arch/mips/ralink/
+ cflags-$(CONFIG_RALINK)		+= -I$(srctree)/arch/mips/include/asm/mach-ralink
+ 
+ #
++# Ralink RT288x
++#
++load-$(CONFIG_SOC_RT288X)	+= 0xffffffff88000000
++
++#
+ # Ralink RT305x
+ #
+ load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
+diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
+new file mode 100644
+index 0000000..1e0788e
+--- /dev/null
++++ b/arch/mips/ralink/rt288x.c
+@@ -0,0 +1,139 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Parts of this file are based on Ralink's 2.6.21 BSP
++ *
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++
++#include <asm/mipsregs.h>
++#include <asm/mach-ralink/ralink_regs.h>
++#include <asm/mach-ralink/rt288x.h>
++
++#include "common.h"
++
++static struct ralink_pinmux_grp mode_mux[] = {
++	{
++		.name = "i2c",
++		.mask = RT2880_GPIO_MODE_I2C,
++		.gpio_first = 1,
++		.gpio_last = 2,
++	}, {
++		.name = "spi",
++		.mask = RT2880_GPIO_MODE_SPI,
++		.gpio_first = 3,
++		.gpio_last = 6,
++	}, {
++		.name = "uartlite",
++		.mask = RT2880_GPIO_MODE_UART0,
++		.gpio_first = 7,
++		.gpio_last = 14,
++	}, {
++		.name = "jtag",
++		.mask = RT2880_GPIO_MODE_JTAG,
++		.gpio_first = 17,
++		.gpio_last = 21,
++	}, {
++		.name = "mdio",
++		.mask = RT2880_GPIO_MODE_MDIO,
++		.gpio_first = 22,
++		.gpio_last = 23,
++	}, {
++		.name = "sdram",
++		.mask = RT2880_GPIO_MODE_SDRAM,
++		.gpio_first = 24,
++		.gpio_last = 39,
++	}, {
++		.name = "pci",
++		.mask = RT2880_GPIO_MODE_PCI,
++		.gpio_first = 40,
++		.gpio_last = 71,
++	}, {0}
++};
++
++static void rt288x_wdt_reset(void)
++{
++	u32 t;
++
++	/* enable WDT reset output on pin SRAM_CS_N */
++	t = rt_sysc_r32(SYSC_REG_CLKCFG);
++	t |= CLKCFG_SRAM_CS_N_WDT;
++	rt_sysc_w32(t, SYSC_REG_CLKCFG);
++}
++
++struct ralink_pinmux rt_gpio_pinmux = {
++	.mode = mode_mux,
++	.wdt_reset = rt288x_wdt_reset,
++};
++
++void __init ralink_clk_init(void)
++{
++	unsigned long cpu_rate;
++	u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
++	t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
++
++	switch (t) {
++	case SYSTEM_CONFIG_CPUCLK_250:
++		cpu_rate = 250000000;
++		break;
++	case SYSTEM_CONFIG_CPUCLK_266:
++		cpu_rate = 266666667;
++		break;
++	case SYSTEM_CONFIG_CPUCLK_280:
++		cpu_rate = 280000000;
++		break;
++	case SYSTEM_CONFIG_CPUCLK_300:
++		cpu_rate = 300000000;
++		break;
++	}
++
++	ralink_clk_add("cpu", cpu_rate);
++	ralink_clk_add("300100.timer", cpu_rate / 2);
++	ralink_clk_add("300120.watchdog", cpu_rate / 2);
++	ralink_clk_add("300500.uart", cpu_rate / 2);
++	ralink_clk_add("300c00.uartlite", cpu_rate / 2);
++	ralink_clk_add("400000.ethernet", cpu_rate / 2);
++}
++
++void __init ralink_of_remap(void)
++{
++	rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
++	rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
++
++	if (!rt_sysc_membase || !rt_memc_membase)
++		panic("Failed to remap core resources");
++}
++
++void prom_soc_init(struct ralink_soc_info *soc_info)
++{
++	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
++	const char *name;
++	u32 n0;
++	u32 n1;
++	u32 id;
++
++	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
++	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
++	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
++
++	if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
++		soc_info->compatible = "ralink,r2880-soc";
++		name = "RT2880";
++	} else {
++		panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
++	}
++
++	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
++		"Ralink %s id:%u rev:%u",
++		name,
++		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
++		(id & CHIP_ID_REV_MASK));
++}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0028-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch b/target/linux/ramips/patches-3.8/0028-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch
new file mode 100644
index 0000000000..f124fecce8
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0028-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch
@@ -0,0 +1,567 @@
+From c75f4a5af758494595fded27efb95732365d10db Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jan 2013 09:39:02 +0100
+Subject: [PATCH 28/79] MIPS: ralink: adds support for RT3883 SoC family
+
+Add support code for rt3883 SOC.
+
+The code detects the SoC and registers the clk / pinmux settings.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5185/
+---
+ arch/mips/include/asm/mach-ralink/rt3883.h |  247 ++++++++++++++++++++++++++++
+ arch/mips/ralink/Kconfig                   |    5 +
+ arch/mips/ralink/Makefile                  |    1 +
+ arch/mips/ralink/Platform                  |    5 +
+ arch/mips/ralink/rt3883.c                  |  242 +++++++++++++++++++++++++++
+ 5 files changed, 500 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/rt3883.h
+ create mode 100644 arch/mips/ralink/rt3883.c
+
+diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
+new file mode 100644
+index 0000000..b91c6c1
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt3883.h
+@@ -0,0 +1,247 @@
++/*
++ * Ralink RT3662/RT3883 SoC register definitions
++ *
++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef _RT3883_REGS_H_
++#define _RT3883_REGS_H_
++
++#include <linux/bitops.h>
++
++#define RT3883_SDRAM_BASE	0x00000000
++#define RT3883_SYSC_BASE	0x10000000
++#define RT3883_TIMER_BASE	0x10000100
++#define RT3883_INTC_BASE	0x10000200
++#define RT3883_MEMC_BASE	0x10000300
++#define RT3883_UART0_BASE	0x10000500
++#define RT3883_PIO_BASE		0x10000600
++#define RT3883_FSCC_BASE	0x10000700
++#define RT3883_NANDC_BASE	0x10000810
++#define RT3883_I2C_BASE		0x10000900
++#define RT3883_I2S_BASE		0x10000a00
++#define RT3883_SPI_BASE		0x10000b00
++#define RT3883_UART1_BASE	0x10000c00
++#define RT3883_PCM_BASE		0x10002000
++#define RT3883_GDMA_BASE	0x10002800
++#define RT3883_CODEC1_BASE	0x10003000
++#define RT3883_CODEC2_BASE	0x10003800
++#define RT3883_FE_BASE		0x10100000
++#define RT3883_ROM_BASE		0x10118000
++#define RT3883_USBDEV_BASE	0x10112000
++#define RT3883_PCI_BASE		0x10140000
++#define RT3883_WLAN_BASE	0x10180000
++#define RT3883_USBHOST_BASE	0x101c0000
++#define RT3883_BOOT_BASE	0x1c000000
++#define RT3883_SRAM_BASE	0x1e000000
++#define RT3883_PCIMEM_BASE	0x20000000
++
++#define RT3883_EHCI_BASE	(RT3883_USBHOST_BASE)
++#define RT3883_OHCI_BASE	(RT3883_USBHOST_BASE + 0x1000)
++
++#define RT3883_SYSC_SIZE	0x100
++#define RT3883_TIMER_SIZE	0x100
++#define RT3883_INTC_SIZE	0x100
++#define RT3883_MEMC_SIZE	0x100
++#define RT3883_UART0_SIZE	0x100
++#define RT3883_UART1_SIZE	0x100
++#define RT3883_PIO_SIZE		0x100
++#define RT3883_FSCC_SIZE	0x100
++#define RT3883_NANDC_SIZE	0x0f0
++#define RT3883_I2C_SIZE		0x100
++#define RT3883_I2S_SIZE		0x100
++#define RT3883_SPI_SIZE		0x100
++#define RT3883_PCM_SIZE		0x800
++#define RT3883_GDMA_SIZE	0x800
++#define RT3883_CODEC1_SIZE	0x800
++#define RT3883_CODEC2_SIZE	0x800
++#define RT3883_FE_SIZE		0x10000
++#define RT3883_ROM_SIZE		0x4000
++#define RT3883_USBDEV_SIZE	0x4000
++#define RT3883_PCI_SIZE		0x40000
++#define RT3883_WLAN_SIZE	0x40000
++#define RT3883_USBHOST_SIZE	0x40000
++#define RT3883_BOOT_SIZE	(32 * 1024 * 1024)
++#define RT3883_SRAM_SIZE	(32 * 1024 * 1024)
++
++/* SYSC registers */
++#define RT3883_SYSC_REG_CHIPID0_3	0x00	/* Chip ID 0 */
++#define RT3883_SYSC_REG_CHIPID4_7	0x04	/* Chip ID 1 */
++#define RT3883_SYSC_REG_REVID		0x0c	/* Chip Revision Identification */
++#define RT3883_SYSC_REG_SYSCFG0		0x10	/* System Configuration 0 */
++#define RT3883_SYSC_REG_SYSCFG1		0x14	/* System Configuration 1 */
++#define RT3883_SYSC_REG_CLKCFG0		0x2c	/* Clock Configuration 0 */
++#define RT3883_SYSC_REG_CLKCFG1		0x30	/* Clock Configuration 1 */
++#define RT3883_SYSC_REG_RSTCTRL		0x34	/* Reset Control*/
++#define RT3883_SYSC_REG_RSTSTAT		0x38	/* Reset Status*/
++#define RT3883_SYSC_REG_USB_PS		0x5c	/* USB Power saving control */
++#define RT3883_SYSC_REG_GPIO_MODE	0x60	/* GPIO Purpose Select */
++#define RT3883_SYSC_REG_PCIE_CLK_GEN0	0x7c
++#define RT3883_SYSC_REG_PCIE_CLK_GEN1	0x80
++#define RT3883_SYSC_REG_PCIE_CLK_GEN2	0x84
++#define RT3883_SYSC_REG_PMU		0x88
++#define RT3883_SYSC_REG_PMU1		0x8c
++
++#define RT3883_CHIP_NAME0		0x38335452
++#define RT3883_CHIP_NAME1		0x20203338
++
++#define RT3883_REVID_VER_ID_MASK	0x0f
++#define RT3883_REVID_VER_ID_SHIFT	8
++#define RT3883_REVID_ECO_ID_MASK	0x0f
++
++#define RT3883_SYSCFG0_DRAM_TYPE_DDR2	BIT(17)
++#define RT3883_SYSCFG0_CPUCLK_SHIFT	8
++#define RT3883_SYSCFG0_CPUCLK_MASK	0x3
++#define RT3883_SYSCFG0_CPUCLK_250	0x0
++#define RT3883_SYSCFG0_CPUCLK_384	0x1
++#define RT3883_SYSCFG0_CPUCLK_480	0x2
++#define RT3883_SYSCFG0_CPUCLK_500	0x3
++
++#define RT3883_SYSCFG1_USB0_HOST_MODE	BIT(10)
++#define RT3883_SYSCFG1_PCIE_RC_MODE	BIT(8)
++#define RT3883_SYSCFG1_PCI_HOST_MODE	BIT(7)
++#define RT3883_SYSCFG1_PCI_66M_MODE	BIT(6)
++#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT	BIT(2)
++
++#define RT3883_CLKCFG1_PCIE_CLK_EN	BIT(21)
++#define RT3883_CLKCFG1_UPHY1_CLK_EN	BIT(20)
++#define RT3883_CLKCFG1_PCI_CLK_EN	BIT(19)
++#define RT3883_CLKCFG1_UPHY0_CLK_EN	BIT(18)
++
++#define RT3883_GPIO_MODE_I2C		BIT(0)
++#define RT3883_GPIO_MODE_SPI		BIT(1)
++#define RT3883_GPIO_MODE_UART0_SHIFT	2
++#define RT3883_GPIO_MODE_UART0_MASK	0x7
++#define RT3883_GPIO_MODE_UART0(x)	((x) << RT3883_GPIO_MODE_UART0_SHIFT)
++#define RT3883_GPIO_MODE_UARTF		0x0
++#define RT3883_GPIO_MODE_PCM_UARTF	0x1
++#define RT3883_GPIO_MODE_PCM_I2S	0x2
++#define RT3883_GPIO_MODE_I2S_UARTF	0x3
++#define RT3883_GPIO_MODE_PCM_GPIO	0x4
++#define RT3883_GPIO_MODE_GPIO_UARTF	0x5
++#define RT3883_GPIO_MODE_GPIO_I2S	0x6
++#define RT3883_GPIO_MODE_GPIO		0x7
++#define RT3883_GPIO_MODE_UART1		BIT(5)
++#define RT3883_GPIO_MODE_JTAG		BIT(6)
++#define RT3883_GPIO_MODE_MDIO		BIT(7)
++#define RT3883_GPIO_MODE_GE1		BIT(9)
++#define RT3883_GPIO_MODE_GE2		BIT(10)
++#define RT3883_GPIO_MODE_PCI_SHIFT	11
++#define RT3883_GPIO_MODE_PCI_MASK	0x7
++#define RT3883_GPIO_MODE_PCI		(RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
++#define RT3883_GPIO_MODE_LNA_A_SHIFT	16
++#define RT3883_GPIO_MODE_LNA_A_MASK	0x3
++#define _RT3883_GPIO_MODE_LNA_A(_x)	((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT)
++#define RT3883_GPIO_MODE_LNA_A_GPIO	0x3
++#define RT3883_GPIO_MODE_LNA_A		_RT3883_GPIO_MODE_LNA_A(RT3883_GPIO_MODE_LNA_A_MASK)
++#define RT3883_GPIO_MODE_LNA_G_SHIFT	18
++#define RT3883_GPIO_MODE_LNA_G_MASK	0x3
++#define _RT3883_GPIO_MODE_LNA_G(_x)	((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT)
++#define RT3883_GPIO_MODE_LNA_G_GPIO	0x3
++#define RT3883_GPIO_MODE_LNA_G		_RT3883_GPIO_MODE_LNA_G(RT3883_GPIO_MODE_LNA_G_MASK)
++
++#define RT3883_GPIO_I2C_SD		1
++#define RT3883_GPIO_I2C_SCLK		2
++#define RT3883_GPIO_SPI_CS0		3
++#define RT3883_GPIO_SPI_CLK		4
++#define RT3883_GPIO_SPI_MOSI		5
++#define RT3883_GPIO_SPI_MISO		6
++#define RT3883_GPIO_7			7
++#define RT3883_GPIO_10			10
++#define RT3883_GPIO_14			14
++#define RT3883_GPIO_UART1_TXD		15
++#define RT3883_GPIO_UART1_RXD		16
++#define RT3883_GPIO_JTAG_TDO		17
++#define RT3883_GPIO_JTAG_TDI		18
++#define RT3883_GPIO_JTAG_TMS		19
++#define RT3883_GPIO_JTAG_TCLK		20
++#define RT3883_GPIO_JTAG_TRST_N		21
++#define RT3883_GPIO_MDIO_MDC		22
++#define RT3883_GPIO_MDIO_MDIO		23
++#define RT3883_GPIO_LNA_PE_A0		32
++#define RT3883_GPIO_LNA_PE_A1		33
++#define RT3883_GPIO_LNA_PE_A2		34
++#define RT3883_GPIO_LNA_PE_G0		35
++#define RT3883_GPIO_LNA_PE_G1		36
++#define RT3883_GPIO_LNA_PE_G2		37
++#define RT3883_GPIO_PCI_AD0		40
++#define RT3883_GPIO_PCI_AD31		71
++#define RT3883_GPIO_GE2_TXD0		72
++#define RT3883_GPIO_GE2_TXD1		73
++#define RT3883_GPIO_GE2_TXD2		74
++#define RT3883_GPIO_GE2_TXD3		75
++#define RT3883_GPIO_GE2_TXEN		76
++#define RT3883_GPIO_GE2_TXCLK		77
++#define RT3883_GPIO_GE2_RXD0		78
++#define RT3883_GPIO_GE2_RXD1		79
++#define RT3883_GPIO_GE2_RXD2		80
++#define RT3883_GPIO_GE2_RXD3		81
++#define RT3883_GPIO_GE2_RXDV		82
++#define RT3883_GPIO_GE2_RXCLK		83
++#define RT3883_GPIO_GE1_TXD0		84
++#define RT3883_GPIO_GE1_TXD1		85
++#define RT3883_GPIO_GE1_TXD2		86
++#define RT3883_GPIO_GE1_TXD3		87
++#define RT3883_GPIO_GE1_TXEN		88
++#define RT3883_GPIO_GE1_TXCLK		89
++#define RT3883_GPIO_GE1_RXD0		90
++#define RT3883_GPIO_GE1_RXD1		91
++#define RT3883_GPIO_GE1_RXD2		92
++#define RT3883_GPIO_GE1_RXD3		93
++#define RT3883_GPIO_GE1_RXDV		94
++#define RT3883_GPIO_GE1_RXCLK	95
++
++#define RT3883_RSTCTRL_PCIE_PCI_PDM	BIT(27)
++#define RT3883_RSTCTRL_FLASH		BIT(26)
++#define RT3883_RSTCTRL_UDEV		BIT(25)
++#define RT3883_RSTCTRL_PCI		BIT(24)
++#define RT3883_RSTCTRL_PCIE		BIT(23)
++#define RT3883_RSTCTRL_UHST		BIT(22)
++#define RT3883_RSTCTRL_FE		BIT(21)
++#define RT3883_RSTCTRL_WLAN		BIT(20)
++#define RT3883_RSTCTRL_UART1		BIT(29)
++#define RT3883_RSTCTRL_SPI		BIT(18)
++#define RT3883_RSTCTRL_I2S		BIT(17)
++#define RT3883_RSTCTRL_I2C		BIT(16)
++#define RT3883_RSTCTRL_NAND		BIT(15)
++#define RT3883_RSTCTRL_DMA		BIT(14)
++#define RT3883_RSTCTRL_PIO		BIT(13)
++#define RT3883_RSTCTRL_UART		BIT(12)
++#define RT3883_RSTCTRL_PCM		BIT(11)
++#define RT3883_RSTCTRL_MC		BIT(10)
++#define RT3883_RSTCTRL_INTC		BIT(9)
++#define RT3883_RSTCTRL_TIMER		BIT(8)
++#define RT3883_RSTCTRL_SYS		BIT(0)
++
++#define RT3883_INTC_INT_SYSCTL	BIT(0)
++#define RT3883_INTC_INT_TIMER0	BIT(1)
++#define RT3883_INTC_INT_TIMER1	BIT(2)
++#define RT3883_INTC_INT_IA	BIT(3)
++#define RT3883_INTC_INT_PCM	BIT(4)
++#define RT3883_INTC_INT_UART0	BIT(5)
++#define RT3883_INTC_INT_PIO	BIT(6)
++#define RT3883_INTC_INT_DMA	BIT(7)
++#define RT3883_INTC_INT_NAND	BIT(8)
++#define RT3883_INTC_INT_PERFC	BIT(9)
++#define RT3883_INTC_INT_I2S	BIT(10)
++#define RT3883_INTC_INT_UART1	BIT(12)
++#define RT3883_INTC_INT_UHST	BIT(18)
++#define RT3883_INTC_INT_UDEV	BIT(19)
++
++/* FLASH/SRAM/Codec Controller registers */
++#define RT3883_FSCC_REG_FLASH_CFG0	0x00
++#define RT3883_FSCC_REG_FLASH_CFG1	0x04
++#define RT3883_FSCC_REG_CODEC_CFG0	0x40
++#define RT3883_FSCC_REG_CODEC_CFG1	0x44
++
++#define RT3883_FLASH_CFG_WIDTH_SHIFT	26
++#define RT3883_FLASH_CFG_WIDTH_MASK	0x3
++#define RT3883_FLASH_CFG_WIDTH_8BIT	0x0
++#define RT3883_FLASH_CFG_WIDTH_16BIT	0x1
++#define RT3883_FLASH_CFG_WIDTH_32BIT	0x2
++
++#endif /* _RT3883_REGS_H_ */
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 6723b94..ce57d3e 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -15,6 +15,11 @@ choice
+ 		select USB_ARCH_HAS_OHCI
+ 		select USB_ARCH_HAS_EHCI
+ 
++	config SOC_RT3883
++		bool "RT3883"
++		select USB_ARCH_HAS_OHCI
++		select USB_ARCH_HAS_EHCI
++
+ endchoice
+ 
+ choice
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 6d826f2..ba9669c 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -10,6 +10,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
+ 
+ obj-$(CONFIG_SOC_RT288X) += rt288x.o
+ obj-$(CONFIG_SOC_RT305X) += rt305x.o
++obj-$(CONFIG_SOC_RT3883) += rt3883.o
+ 
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+ 
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+index 3f49e51..f67c08d 100644
+--- a/arch/mips/ralink/Platform
++++ b/arch/mips/ralink/Platform
+@@ -13,3 +13,8 @@ load-$(CONFIG_SOC_RT288X)	+= 0xffffffff88000000
+ # Ralink RT305x
+ #
+ load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
++
++#
++# Ralink RT3883
++#
++load-$(CONFIG_SOC_RT3883)	+= 0xffffffff80000000
+diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
+new file mode 100644
+index 0000000..2d90aa9
+--- /dev/null
++++ b/arch/mips/ralink/rt3883.c
+@@ -0,0 +1,242 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Parts of this file are based on Ralink's 2.6.21 BSP
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++
++#include <asm/mipsregs.h>
++#include <asm/mach-ralink/ralink_regs.h>
++#include <asm/mach-ralink/rt3883.h>
++
++#include "common.h"
++
++static struct ralink_pinmux_grp mode_mux[] = {
++	{
++		.name = "i2c",
++		.mask = RT3883_GPIO_MODE_I2C,
++		.gpio_first = RT3883_GPIO_I2C_SD,
++		.gpio_last = RT3883_GPIO_I2C_SCLK,
++	}, {
++		.name = "spi",
++		.mask = RT3883_GPIO_MODE_SPI,
++		.gpio_first = RT3883_GPIO_SPI_CS0,
++		.gpio_last = RT3883_GPIO_SPI_MISO,
++	}, {
++		.name = "uartlite",
++		.mask = RT3883_GPIO_MODE_UART1,
++		.gpio_first = RT3883_GPIO_UART1_TXD,
++		.gpio_last = RT3883_GPIO_UART1_RXD,
++	}, {
++		.name = "jtag",
++		.mask = RT3883_GPIO_MODE_JTAG,
++		.gpio_first = RT3883_GPIO_JTAG_TDO,
++		.gpio_last = RT3883_GPIO_JTAG_TCLK,
++	}, {
++		.name = "mdio",
++		.mask = RT3883_GPIO_MODE_MDIO,
++		.gpio_first = RT3883_GPIO_MDIO_MDC,
++		.gpio_last = RT3883_GPIO_MDIO_MDIO,
++	}, {
++		.name = "ge1",
++		.mask = RT3883_GPIO_MODE_GE1,
++		.gpio_first = RT3883_GPIO_GE1_TXD0,
++		.gpio_last = RT3883_GPIO_GE1_RXCLK,
++	}, {
++		.name = "ge2",
++		.mask = RT3883_GPIO_MODE_GE2,
++		.gpio_first = RT3883_GPIO_GE2_TXD0,
++		.gpio_last = RT3883_GPIO_GE2_RXCLK,
++	}, {
++		.name = "pci",
++		.mask = RT3883_GPIO_MODE_PCI,
++		.gpio_first = RT3883_GPIO_PCI_AD0,
++		.gpio_last = RT3883_GPIO_PCI_AD31,
++	}, {
++		.name = "lna a",
++		.mask = RT3883_GPIO_MODE_LNA_A,
++		.gpio_first = RT3883_GPIO_LNA_PE_A0,
++		.gpio_last = RT3883_GPIO_LNA_PE_A2,
++	}, {
++		.name = "lna g",
++		.mask = RT3883_GPIO_MODE_LNA_G,
++		.gpio_first = RT3883_GPIO_LNA_PE_G0,
++		.gpio_last = RT3883_GPIO_LNA_PE_G2,
++	}, {0}
++};
++
++static struct ralink_pinmux_grp uart_mux[] = {
++	{
++		.name = "uartf",
++		.mask = RT3883_GPIO_MODE_UARTF,
++		.gpio_first = RT3883_GPIO_7,
++		.gpio_last = RT3883_GPIO_14,
++	}, {
++		.name = "pcm uartf",
++		.mask = RT3883_GPIO_MODE_PCM_UARTF,
++		.gpio_first = RT3883_GPIO_7,
++		.gpio_last = RT3883_GPIO_14,
++	}, {
++		.name = "pcm i2s",
++		.mask = RT3883_GPIO_MODE_PCM_I2S,
++		.gpio_first = RT3883_GPIO_7,
++		.gpio_last = RT3883_GPIO_14,
++	}, {
++		.name = "i2s uartf",
++		.mask = RT3883_GPIO_MODE_I2S_UARTF,
++		.gpio_first = RT3883_GPIO_7,
++		.gpio_last = RT3883_GPIO_14,
++	}, {
++		.name = "pcm gpio",
++		.mask = RT3883_GPIO_MODE_PCM_GPIO,
++		.gpio_first = RT3883_GPIO_11,
++		.gpio_last = RT3883_GPIO_14,
++	}, {
++		.name = "gpio uartf",
++		.mask = RT3883_GPIO_MODE_GPIO_UARTF,
++		.gpio_first = RT3883_GPIO_7,
++		.gpio_last = RT3883_GPIO_10,
++	}, {
++		.name = "gpio i2s",
++		.mask = RT3883_GPIO_MODE_GPIO_I2S,
++		.gpio_first = RT3883_GPIO_7,
++		.gpio_last = RT3883_GPIO_10,
++	}, {
++		.name = "gpio",
++		.mask = RT3883_GPIO_MODE_GPIO,
++	}, {0}
++};
++
++static struct ralink_pinmux_grp pci_mux[] = {
++	{
++		.name = "pci-dev",
++		.mask = 0,
++		.gpio_first = RT3883_GPIO_PCI_AD0,
++		.gpio_last = RT3883_GPIO_PCI_AD31,
++	}, {
++		.name = "pci-host2",
++		.mask = 1,
++		.gpio_first = RT3883_GPIO_PCI_AD0,
++		.gpio_last = RT3883_GPIO_PCI_AD31,
++	}, {
++		.name = "pci-host1",
++		.mask = 2,
++		.gpio_first = RT3883_GPIO_PCI_AD0,
++		.gpio_last = RT3883_GPIO_PCI_AD31,
++	}, {
++		.name = "pci-fnc",
++		.mask = 3,
++		.gpio_first = RT3883_GPIO_PCI_AD0,
++		.gpio_last = RT3883_GPIO_PCI_AD31,
++	}, {
++		.name = "pci-gpio",
++		.mask = 7,
++		.gpio_first = RT3883_GPIO_PCI_AD0,
++		.gpio_last = RT3883_GPIO_PCI_AD31,
++	}, {0}
++};
++
++static void rt3883_wdt_reset(void)
++{
++	u32 t;
++
++	/* enable WDT reset output on GPIO 2 */
++	t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
++	t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
++	rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
++}
++
++struct ralink_pinmux rt_gpio_pinmux = {
++	.mode = mode_mux,
++	.uart = uart_mux,
++	.uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
++	.uart_mask = RT3883_GPIO_MODE_GPIO,
++	.wdt_reset = rt3883_wdt_reset,
++	.pci = pci_mux,
++	.pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
++	.pci_mask = RT3883_GPIO_MODE_PCI_MASK,
++};
++
++void __init ralink_clk_init(void)
++{
++	unsigned long cpu_rate, sys_rate;
++	u32 syscfg0;
++	u32 clksel;
++	u32 ddr2;
++
++	syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0);
++	clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
++		RT3883_SYSCFG0_CPUCLK_MASK);
++	ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
++
++	switch (clksel) {
++	case RT3883_SYSCFG0_CPUCLK_250:
++		cpu_rate = 250000000;
++		sys_rate = (ddr2) ? 125000000 : 83000000;
++		break;
++	case RT3883_SYSCFG0_CPUCLK_384:
++		cpu_rate = 384000000;
++		sys_rate = (ddr2) ? 128000000 : 96000000;
++		break;
++	case RT3883_SYSCFG0_CPUCLK_480:
++		cpu_rate = 480000000;
++		sys_rate = (ddr2) ? 160000000 : 120000000;
++		break;
++	case RT3883_SYSCFG0_CPUCLK_500:
++		cpu_rate = 500000000;
++		sys_rate = (ddr2) ? 166000000 : 125000000;
++		break;
++	}
++
++	ralink_clk_add("cpu", cpu_rate);
++	ralink_clk_add("10000100.timer", sys_rate);
++	ralink_clk_add("10000120.watchdog", sys_rate);
++	ralink_clk_add("10000500.uart", 40000000);
++	ralink_clk_add("10000b00.spi", sys_rate);
++	ralink_clk_add("10000c00.uartlite", 40000000);
++	ralink_clk_add("10100000.ethernet", sys_rate);
++}
++
++void __init ralink_of_remap(void)
++{
++	rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc");
++	rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc");
++
++	if (!rt_sysc_membase || !rt_memc_membase)
++		panic("Failed to remap core resources");
++}
++
++void prom_soc_init(struct ralink_soc_info *soc_info)
++{
++	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
++	const char *name;
++	u32 n0;
++	u32 n1;
++	u32 id;
++
++	n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
++	n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
++	id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
++
++	if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
++		soc_info->compatible = "ralink,rt3883-soc";
++		name = "RT3883";
++	} else {
++		panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
++	}
++
++	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
++		"Ralink %s ver:%u eco:%u",
++		name,
++		(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
++		(id & RT3883_REVID_ECO_ID_MASK));
++}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0029-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch b/target/linux/ramips/patches-3.8/0029-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch
new file mode 100644
index 0000000000..f03c10f06c
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0029-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch
@@ -0,0 +1,366 @@
+From 41b7b06b494eef5a081363566314960306437d73 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 21 Mar 2013 17:49:02 +0100
+Subject: [PATCH 29/79] MIPS: ralink: adds support for MT7620 SoC family
+
+Add support code for mt7620 SOC.
+
+The code detects the SoC and registers the clk / pinmux settings.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5177/
+---
+ arch/mips/include/asm/mach-ralink/mt7620.h |   76 ++++++++++
+ arch/mips/ralink/Kconfig                   |    3 +
+ arch/mips/ralink/Makefile                  |    1 +
+ arch/mips/ralink/Platform                  |    5 +
+ arch/mips/ralink/mt7620.c                  |  214 ++++++++++++++++++++++++++++
+ 5 files changed, 299 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/mt7620.h
+ create mode 100644 arch/mips/ralink/mt7620.c
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+new file mode 100644
+index 0000000..b272649
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -0,0 +1,76 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Parts of this file are based on Ralink's 2.6.21 BSP
++ *
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _MT7620_REGS_H_
++#define _MT7620_REGS_H_
++
++#define MT7620_SYSC_BASE		0x10000000
++
++#define SYSC_REG_CHIP_NAME0		0x00
++#define SYSC_REG_CHIP_NAME1		0x04
++#define SYSC_REG_CHIP_REV		0x0c
++#define SYSC_REG_SYSTEM_CONFIG0		0x10
++#define SYSC_REG_SYSTEM_CONFIG1		0x14
++#define SYSC_REG_CPLL_CONFIG0		0x54
++#define SYSC_REG_CPLL_CONFIG1		0x58
++
++#define MT7620N_CHIP_NAME0		0x33365452
++#define MT7620N_CHIP_NAME1		0x20203235
++
++#define MT7620A_CHIP_NAME0		0x3637544d
++#define MT7620A_CHIP_NAME1		0x20203032
++
++#define CHIP_REV_PKG_MASK		0x1
++#define CHIP_REV_PKG_SHIFT		16
++#define CHIP_REV_VER_MASK		0xf
++#define CHIP_REV_VER_SHIFT		8
++#define CHIP_REV_ECO_MASK		0xf
++
++#define CPLL_SW_CONFIG_SHIFT		31
++#define CPLL_SW_CONFIG_MASK		0x1
++#define CPLL_CPU_CLK_SHIFT		24
++#define CPLL_CPU_CLK_MASK		0x1
++#define CPLL_MULT_RATIO_SHIFT           16
++#define CPLL_MULT_RATIO                 0x7
++#define CPLL_DIV_RATIO_SHIFT            10
++#define CPLL_DIV_RATIO                  0x3
++
++#define SYSCFG0_DRAM_TYPE_MASK		0x3
++#define SYSCFG0_DRAM_TYPE_SHIFT		4
++#define SYSCFG0_DRAM_TYPE_SDRAM		0
++#define SYSCFG0_DRAM_TYPE_DDR1		1
++#define SYSCFG0_DRAM_TYPE_DDR2		2
++
++#define MT7620_GPIO_MODE_I2C		BIT(0)
++#define MT7620_GPIO_MODE_UART0_SHIFT	2
++#define MT7620_GPIO_MODE_UART0_MASK	0x7
++#define MT7620_GPIO_MODE_UART0(x)	((x) << MT7620_GPIO_MODE_UART0_SHIFT)
++#define MT7620_GPIO_MODE_UARTF		0x0
++#define MT7620_GPIO_MODE_PCM_UARTF	0x1
++#define MT7620_GPIO_MODE_PCM_I2S	0x2
++#define MT7620_GPIO_MODE_I2S_UARTF	0x3
++#define MT7620_GPIO_MODE_PCM_GPIO	0x4
++#define MT7620_GPIO_MODE_GPIO_UARTF	0x5
++#define MT7620_GPIO_MODE_GPIO_I2S	0x6
++#define MT7620_GPIO_MODE_GPIO		0x7
++#define MT7620_GPIO_MODE_UART1		BIT(5)
++#define MT7620_GPIO_MODE_MDIO		BIT(8)
++#define MT7620_GPIO_MODE_RGMII1		BIT(9)
++#define MT7620_GPIO_MODE_RGMII2		BIT(10)
++#define MT7620_GPIO_MODE_SPI		BIT(11)
++#define MT7620_GPIO_MODE_SPI_REF_CLK	BIT(12)
++#define MT7620_GPIO_MODE_WLED		BIT(13)
++#define MT7620_GPIO_MODE_JTAG		BIT(15)
++#define MT7620_GPIO_MODE_EPHY		BIT(15)
++#define MT7620_GPIO_MODE_WDT		BIT(22)
++
++#endif
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index ce57d3e..86f6c77 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -20,6 +20,9 @@ choice
+ 		select USB_ARCH_HAS_OHCI
+ 		select USB_ARCH_HAS_EHCI
+ 
++	config SOC_MT7620
++		bool "MT7620"
++
+ endchoice
+ 
+ choice
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index ba9669c..38cf1a8 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -11,6 +11,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
+ obj-$(CONFIG_SOC_RT288X) += rt288x.o
+ obj-$(CONFIG_SOC_RT305X) += rt305x.o
+ obj-$(CONFIG_SOC_RT3883) += rt3883.o
++obj-$(CONFIG_SOC_MT7620) += mt7620.o
+ 
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+ 
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+index f67c08d..b2cbf16 100644
+--- a/arch/mips/ralink/Platform
++++ b/arch/mips/ralink/Platform
+@@ -18,3 +18,8 @@ load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
+ # Ralink RT3883
+ #
+ load-$(CONFIG_SOC_RT3883)	+= 0xffffffff80000000
++
++#
++# Ralink MT7620
++#
++load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+new file mode 100644
+index 0000000..eb00ab8
+--- /dev/null
++++ b/arch/mips/ralink/mt7620.c
+@@ -0,0 +1,214 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Parts of this file are based on Ralink's 2.6.21 BSP
++ *
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++
++#include <asm/mipsregs.h>
++#include <asm/mach-ralink/ralink_regs.h>
++#include <asm/mach-ralink/mt7620.h>
++
++#include "common.h"
++
++/* does the board have sdram or ddram */
++static int dram_type;
++
++/* the pll dividers */
++static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
++
++static struct ralink_pinmux_grp mode_mux[] = {
++	{
++		.name = "i2c",
++		.mask = MT7620_GPIO_MODE_I2C,
++		.gpio_first = 1,
++		.gpio_last = 2,
++	}, {
++		.name = "spi",
++		.mask = MT7620_GPIO_MODE_SPI,
++		.gpio_first = 3,
++		.gpio_last = 6,
++	}, {
++		.name = "uartlite",
++		.mask = MT7620_GPIO_MODE_UART1,
++		.gpio_first = 15,
++		.gpio_last = 16,
++	}, {
++		.name = "wdt",
++		.mask = MT7620_GPIO_MODE_WDT,
++		.gpio_first = 17,
++		.gpio_last = 17,
++	}, {
++		.name = "mdio",
++		.mask = MT7620_GPIO_MODE_MDIO,
++		.gpio_first = 22,
++		.gpio_last = 23,
++	}, {
++		.name = "rgmii1",
++		.mask = MT7620_GPIO_MODE_RGMII1,
++		.gpio_first = 24,
++		.gpio_last = 35,
++	}, {
++		.name = "spi refclk",
++		.mask = MT7620_GPIO_MODE_SPI_REF_CLK,
++		.gpio_first = 37,
++		.gpio_last = 39,
++	}, {
++		.name = "jtag",
++		.mask = MT7620_GPIO_MODE_JTAG,
++		.gpio_first = 40,
++		.gpio_last = 44,
++	}, {
++		/* shared lines with jtag */
++		.name = "ephy",
++		.mask = MT7620_GPIO_MODE_EPHY,
++		.gpio_first = 40,
++		.gpio_last = 44,
++	}, {
++		.name = "nand",
++		.mask = MT7620_GPIO_MODE_JTAG,
++		.gpio_first = 45,
++		.gpio_last = 59,
++	}, {
++		.name = "rgmii2",
++		.mask = MT7620_GPIO_MODE_RGMII2,
++		.gpio_first = 60,
++		.gpio_last = 71,
++	}, {
++		.name = "wled",
++		.mask = MT7620_GPIO_MODE_WLED,
++		.gpio_first = 72,
++		.gpio_last = 72,
++	}, {0}
++};
++
++static struct ralink_pinmux_grp uart_mux[] = {
++	{
++		.name = "uartf",
++		.mask = MT7620_GPIO_MODE_UARTF,
++		.gpio_first = 7,
++		.gpio_last = 14,
++	}, {
++		.name = "pcm uartf",
++		.mask = MT7620_GPIO_MODE_PCM_UARTF,
++		.gpio_first = 7,
++		.gpio_last = 14,
++	}, {
++		.name = "pcm i2s",
++		.mask = MT7620_GPIO_MODE_PCM_I2S,
++		.gpio_first = 7,
++		.gpio_last = 14,
++	}, {
++		.name = "i2s uartf",
++		.mask = MT7620_GPIO_MODE_I2S_UARTF,
++		.gpio_first = 7,
++		.gpio_last = 14,
++	}, {
++		.name = "pcm gpio",
++		.mask = MT7620_GPIO_MODE_PCM_GPIO,
++		.gpio_first = 11,
++		.gpio_last = 14,
++	}, {
++		.name = "gpio uartf",
++		.mask = MT7620_GPIO_MODE_GPIO_UARTF,
++		.gpio_first = 7,
++		.gpio_last = 10,
++	}, {
++		.name = "gpio i2s",
++		.mask = MT7620_GPIO_MODE_GPIO_I2S,
++		.gpio_first = 7,
++		.gpio_last = 10,
++	}, {
++		.name = "gpio",
++		.mask = MT7620_GPIO_MODE_GPIO,
++	}, {0}
++};
++
++struct ralink_pinmux rt_gpio_pinmux = {
++	.mode = mode_mux,
++	.uart = uart_mux,
++	.uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
++	.uart_mask = MT7620_GPIO_MODE_GPIO,
++};
++
++void __init ralink_clk_init(void)
++{
++	unsigned long cpu_rate, sys_rate;
++	u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
++	u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
++	u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
++	u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
++
++	if (cpu_clk) {
++		cpu_rate = 480000000;
++	} else if (!swconfig) {
++		cpu_rate = 600000000;
++	} else {
++		u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO;
++		u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO;
++
++		cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000;
++	}
++
++	if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
++		sys_rate = cpu_rate / 4;
++	else
++		sys_rate = cpu_rate / 3;
++
++	ralink_clk_add("cpu", cpu_rate);
++	ralink_clk_add("10000100.timer", 40000000);
++	ralink_clk_add("10000500.uart", 40000000);
++	ralink_clk_add("10000c00.uartlite", 40000000);
++}
++
++void __init ralink_of_remap(void)
++{
++	rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
++	rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
++
++	if (!rt_sysc_membase || !rt_memc_membase)
++		panic("Failed to remap core resources");
++}
++
++void prom_soc_init(struct ralink_soc_info *soc_info)
++{
++	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
++	unsigned char *name = NULL;
++	u32 n0;
++	u32 n1;
++	u32 rev;
++	u32 cfg0;
++
++	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
++	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
++
++	if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
++		name = "MT7620N";
++		soc_info->compatible = "ralink,mt7620n-soc";
++	} else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
++		name = "MT7620A";
++		soc_info->compatible = "ralink,mt7620a-soc";
++	} else {
++		panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
++	}
++
++	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
++
++	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
++		"Ralink %s ver:%u eco:%u",
++		name,
++		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
++		(rev & CHIP_REV_ECO_MASK));
++
++	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
++	dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
++}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0030-MIPS-ralink-add-cpu-feature-overrides.h.patch b/target/linux/ramips/patches-3.8/0030-MIPS-ralink-add-cpu-feature-overrides.h.patch
new file mode 100644
index 0000000000..21205a3892
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0030-MIPS-ralink-add-cpu-feature-overrides.h.patch
@@ -0,0 +1,232 @@
+From 8a7cac5e324f044f3970d686d79e3489260f6d21 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 10 Apr 2013 09:19:07 +0200
+Subject: [PATCH 30/79] MIPS: ralink: add cpu-feature-overrides.h
+
+Add cpu-feature-overrides.h for RT288x, RT305x and RT3883.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5175/
+---
+ .../asm/mach-ralink/rt288x/cpu-feature-overrides.h |   56 ++++++++++++++++++++
+ .../asm/mach-ralink/rt305x/cpu-feature-overrides.h |   56 ++++++++++++++++++++
+ .../asm/mach-ralink/rt3883/cpu-feature-overrides.h |   55 +++++++++++++++++++
+ arch/mips/ralink/Platform                          |    3 ++
+ 4 files changed, 170 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
+ create mode 100644 arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
+ create mode 100644 arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
+
+diff --git a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
+new file mode 100644
+index 0000000..72fc106
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
+@@ -0,0 +1,56 @@
++/*
++ * Ralink RT288x specific CPU feature overrides
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This file was derived from: include/asm-mips/cpu-features.h
++ *	Copyright (C) 2003, 2004 Ralf Baechle
++ *	Copyright (C) 2004 Maciej W. Rozycki
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++#ifndef _RT288X_CPU_FEATURE_OVERRIDES_H
++#define _RT288X_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_has_tlb		1
++#define cpu_has_4kex		1
++#define cpu_has_3k_cache	0
++#define cpu_has_4k_cache	1
++#define cpu_has_tx39_cache	0
++#define cpu_has_sb1_cache	0
++#define cpu_has_fpu		0
++#define cpu_has_32fpr		0
++#define cpu_has_counter		1
++#define cpu_has_watch		1
++#define cpu_has_divec		1
++
++#define cpu_has_prefetch	1
++#define cpu_has_ejtag		1
++#define cpu_has_llsc		1
++
++#define cpu_has_mips16		1
++#define cpu_has_mdmx		0
++#define cpu_has_mips3d		0
++#define cpu_has_smartmips	0
++
++#define cpu_has_mips32r1	1
++#define cpu_has_mips32r2	1
++#define cpu_has_mips64r1	0
++#define cpu_has_mips64r2	0
++
++#define cpu_has_dsp		0
++#define cpu_has_mipsmt		0
++
++#define cpu_has_64bits		0
++#define cpu_has_64bit_zero_reg	0
++#define cpu_has_64bit_gp_regs	0
++#define cpu_has_64bit_addresses	0
++
++#define cpu_dcache_line_size()	16
++#define cpu_icache_line_size()	16
++
++#endif /* _RT288X_CPU_FEATURE_OVERRIDES_H */
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
+new file mode 100644
+index 0000000..917c286
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
+@@ -0,0 +1,56 @@
++/*
++ * Ralink RT305x specific CPU feature overrides
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This file was derived from: include/asm-mips/cpu-features.h
++ *	Copyright (C) 2003, 2004 Ralf Baechle
++ *	Copyright (C) 2004 Maciej W. Rozycki
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++#ifndef _RT305X_CPU_FEATURE_OVERRIDES_H
++#define _RT305X_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_has_tlb		1
++#define cpu_has_4kex		1
++#define cpu_has_3k_cache	0
++#define cpu_has_4k_cache	1
++#define cpu_has_tx39_cache	0
++#define cpu_has_sb1_cache	0
++#define cpu_has_fpu		0
++#define cpu_has_32fpr		0
++#define cpu_has_counter		1
++#define cpu_has_watch		1
++#define cpu_has_divec		1
++
++#define cpu_has_prefetch	1
++#define cpu_has_ejtag		1
++#define cpu_has_llsc		1
++
++#define cpu_has_mips16		1
++#define cpu_has_mdmx		0
++#define cpu_has_mips3d		0
++#define cpu_has_smartmips	0
++
++#define cpu_has_mips32r1	1
++#define cpu_has_mips32r2	1
++#define cpu_has_mips64r1	0
++#define cpu_has_mips64r2	0
++
++#define cpu_has_dsp		1
++#define cpu_has_mipsmt		0
++
++#define cpu_has_64bits		0
++#define cpu_has_64bit_zero_reg	0
++#define cpu_has_64bit_gp_regs	0
++#define cpu_has_64bit_addresses	0
++
++#define cpu_dcache_line_size()	32
++#define cpu_icache_line_size()	32
++
++#endif /* _RT305X_CPU_FEATURE_OVERRIDES_H */
+diff --git a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
+new file mode 100644
+index 0000000..181fbf4
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
+@@ -0,0 +1,55 @@
++/*
++ * Ralink RT3662/RT3883 specific CPU feature overrides
++ *
++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was derived from: include/asm-mips/cpu-features.h
++ *	Copyright (C) 2003, 2004 Ralf Baechle
++ *	Copyright (C) 2004 Maciej W. Rozycki
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++#ifndef _RT3883_CPU_FEATURE_OVERRIDES_H
++#define _RT3883_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_has_tlb		1
++#define cpu_has_4kex		1
++#define cpu_has_3k_cache	0
++#define cpu_has_4k_cache	1
++#define cpu_has_tx39_cache	0
++#define cpu_has_sb1_cache	0
++#define cpu_has_fpu		0
++#define cpu_has_32fpr		0
++#define cpu_has_counter		1
++#define cpu_has_watch		1
++#define cpu_has_divec		1
++
++#define cpu_has_prefetch	1
++#define cpu_has_ejtag		1
++#define cpu_has_llsc		1
++
++#define cpu_has_mips16		1
++#define cpu_has_mdmx		0
++#define cpu_has_mips3d		0
++#define cpu_has_smartmips	0
++
++#define cpu_has_mips32r1	1
++#define cpu_has_mips32r2	1
++#define cpu_has_mips64r1	0
++#define cpu_has_mips64r2	0
++
++#define cpu_has_dsp		1
++#define cpu_has_mipsmt		0
++
++#define cpu_has_64bits		0
++#define cpu_has_64bit_zero_reg	0
++#define cpu_has_64bit_gp_regs	0
++#define cpu_has_64bit_addresses	0
++
++#define cpu_dcache_line_size()	32
++#define cpu_icache_line_size()	32
++
++#endif /* _RT3883_CPU_FEATURE_OVERRIDES_H */
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+index b2cbf16..cda4b66 100644
+--- a/arch/mips/ralink/Platform
++++ b/arch/mips/ralink/Platform
+@@ -8,16 +8,19 @@ cflags-$(CONFIG_RALINK)		+= -I$(srctree)/arch/mips/include/asm/mach-ralink
+ # Ralink RT288x
+ #
+ load-$(CONFIG_SOC_RT288X)	+= 0xffffffff88000000
++cflags-$(CONFIG_SOC_RT288X)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt288x
+ 
+ #
+ # Ralink RT305x
+ #
+ load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
++cflags-$(CONFIG_SOC_RT305X)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
+ 
+ #
+ # Ralink RT3883
+ #
+ load-$(CONFIG_SOC_RT3883)	+= 0xffffffff80000000
++cflags-$(CONFIG_SOC_RT3883)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883
+ 
+ #
+ # Ralink MT7620
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0115-DT-add-vendor-prefixes-for-Ralink.patch b/target/linux/ramips/patches-3.8/0031-DT-add-vendor-prefixes-for-Ralink.patch
index a9a99b4cae..7a81af6192 100644
--- a/target/linux/ramips/patches-3.8/0115-DT-add-vendor-prefixes-for-Ralink.patch
+++ b/target/linux/ramips/patches-3.8/0031-DT-add-vendor-prefixes-for-Ralink.patch
@@ -1,7 +1,7 @@
-From 9377ecb9f1fb5da25a0fbd324e7add7644b1d43d Mon Sep 17 00:00:00 2001
+From f13cb76f8ad8714eaf691ef24aebfb57f62dab66 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 13 Apr 2013 10:11:51 +0200
-Subject: [PATCH 115/137] DT: add vendor prefixes for Ralink
+Subject: [PATCH 31/79] DT: add vendor prefixes for Ralink
 
 Signed-off-by: John Crispin <blogic@openwrt.org>
 Acked-by: Grant Likely <grant.likely@secretlab.ca>
@@ -9,6 +9,8 @@ Acked-by: Grant Likely <grant.likely@secretlab.ca>
  Documentation/devicetree/bindings/vendor-prefixes.txt |    1 +
  1 file changed, 1 insertion(+)
 
+diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
+index 902b1b1..d1cc7bb 100644
 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
 +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
 @@ -40,6 +40,7 @@ onnn	ON Semiconductor Corp.
@@ -19,3 +21,6 @@ Acked-by: Grant Likely <grant.likely@secretlab.ca>
  ramtron	Ramtron International
  realtek Realtek Semiconductor Corp.
  samsung	Samsung Semiconductor
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0032-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch b/target/linux/ramips/patches-3.8/0032-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch
new file mode 100644
index 0000000000..1a66e63d86
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0032-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch
@@ -0,0 +1,44 @@
+From 441d0189a47391c6882bbc6a11494e7cd394f1fc Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 13 Apr 2013 09:02:40 +0200
+Subject: [PATCH 32/79] DT: add documentation for the Ralink MIPS SoCs
+
+This patch adds binding documentation for the
+compatible values of the Ralink MIPS SoCs.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Grant Likely <grant.likely@secretlab.ca>
+Patchwork: http://patchwork.linux-mips.org/patch/5187/
+---
+ Documentation/devicetree/bindings/mips/ralink.txt |   18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/mips/ralink.txt
+
+diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt
+new file mode 100644
+index 0000000..59b6a35
+--- /dev/null
++++ b/Documentation/devicetree/bindings/mips/ralink.txt
+@@ -0,0 +1,18 @@
++Ralink MIPS SoC device tree bindings
++
++1. SoCs
++
++Each device tree must specify a compatible value for the Ralink SoC
++it uses in the compatible property of the root node. The compatible
++value must be one of the following values:
++
++  ralink,rt2880-soc
++  ralink,rt3050-soc
++  ralink,rt3052-soc
++  ralink,rt3350-soc
++  ralink,rt3352-soc
++  ralink,rt3883-soc
++  ralink,rt5350-soc
++  ralink,mt7620a-soc
++  ralink,mt7620n-soc
++
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0033-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch b/target/linux/ramips/patches-3.8/0033-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch
new file mode 100644
index 0000000000..a3a674fd06
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0033-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch
@@ -0,0 +1,139 @@
+From 29d1bb6fc97d4391e4ecf96298b6ac42d0daefca Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 20 Jun 2013 18:44:43 +0200
+Subject: [PATCH 33/79] DT: MIPS: ralink: clean up RT3050 dtsi and dts file
+
+* remove nodes for cores whose drivers are not upstream yet
+* add compat string for an additional soc
+* fix a whitespace error
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Grant Likely <grant.likely@secretlab.ca>
+Patchwork: http://patchwork.linux-mips.org/patch/5186/
+---
+ arch/mips/ralink/dts/rt3050.dtsi     |   52 ++--------------------------------
+ arch/mips/ralink/dts/rt3052_eval.dts |   10 ++-----
+ 2 files changed, 4 insertions(+), 58 deletions(-)
+
+diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
+index 069d066..ef7da1e 100644
+--- a/arch/mips/ralink/dts/rt3050.dtsi
++++ b/arch/mips/ralink/dts/rt3050.dtsi
+@@ -1,7 +1,7 @@
+ / {
+ 	#address-cells = <1>;
+ 	#size-cells = <1>;
+-	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
++	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
+ 
+ 	cpus {
+ 		cpu@0 {
+@@ -9,10 +9,6 @@
+ 		};
+ 	};
+ 
+-	chosen {
+-		bootargs = "console=ttyS0,57600 init=/init";
+-	};
+-
+ 	cpuintc: cpuintc@0 {
+ 		#address-cells = <0>;
+ 		#interrupt-cells = <1>;
+@@ -23,7 +19,7 @@
+ 	palmbus@10000000 {
+ 		compatible = "palmbus";
+ 		reg = <0x10000000 0x200000>;
+-                ranges = <0x0 0x10000000 0x1FFFFF>;
++		ranges = <0x0 0x10000000 0x1FFFFF>;
+ 
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+@@ -33,11 +29,6 @@
+ 			reg = <0x0 0x100>;
+ 		};
+ 
+-		timer@100 {
+-			compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
+-			reg = <0x100 0x100>;
+-		};
+-
+ 		intc: intc@200 {
+ 			compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
+ 			reg = <0x200 0x100>;
+@@ -54,45 +45,6 @@
+ 			reg = <0x300 0x100>;
+ 		};
+ 
+-		gpio0: gpio@600 {
+-			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+-			reg = <0x600 0x34>;
+-
+-			gpio-controller;
+-			#gpio-cells = <2>;
+-
+-			ralink,ngpio = <24>;
+-			ralink,regs = [ 00 04 08 0c
+-					20 24 28 2c
+-					30 34 ];
+-		};
+-
+-		gpio1: gpio@638 {
+-			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+-			reg = <0x638 0x24>;
+-
+-			gpio-controller;
+-			#gpio-cells = <2>;
+-
+-			ralink,ngpio = <16>;
+-			ralink,regs = [ 00 04 08 0c
+-					10 14 18 1c
+-					20 24 ];
+-		};
+-
+-		gpio2: gpio@660 {
+-			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+-			reg = <0x660 0x24>;
+-
+-			gpio-controller;
+-			#gpio-cells = <2>;
+-
+-			ralink,ngpio = <12>;
+-			ralink,regs = [ 00 04 08 0c
+-					10 14 18 1c
+-					20 24 ];
+-		};
+-
+ 		uartlite@c00 {
+ 			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+ 			reg = <0xc00 0x100>;
+diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
+index dc56e58..df17f5f 100644
+--- a/arch/mips/ralink/dts/rt3052_eval.dts
++++ b/arch/mips/ralink/dts/rt3052_eval.dts
+@@ -3,8 +3,6 @@
+ /include/ "rt3050.dtsi"
+ 
+ / {
+-	#address-cells = <1>;
+-	#size-cells = <1>;
+ 	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
+ 	model = "Ralink RT3052 evaluation board";
+ 
+@@ -12,12 +10,8 @@
+ 		reg = <0x0 0x2000000>;
+ 	};
+ 
+-	palmbus@10000000 {
+-		sysc@0 {
+-			ralink,pinmux = "uartlite", "spi";
+-			ralink,uartmux = "gpio";
+-			ralink,wdtmux = <0>;
+-		};
++	chosen {
++		bootargs = "console=ttyS0,57600";
+ 	};
+ 
+ 	cfi@1f000000 {
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0118-DT-MIPS-ralink-add-RT2880-dts-files.patch b/target/linux/ramips/patches-3.8/0034-DT-MIPS-ralink-add-RT2880-dts-files.patch
index 8ad9b18eb8..affa7719b9 100644
--- a/target/linux/ramips/patches-3.8/0118-DT-MIPS-ralink-add-RT2880-dts-files.patch
+++ b/target/linux/ramips/patches-3.8/0034-DT-MIPS-ralink-add-RT2880-dts-files.patch
@@ -1,7 +1,7 @@
-From b39e659770cb71939765de8c9e73c0a0cfa832db Mon Sep 17 00:00:00 2001
+From b3cda181b5f9986b05bd95ee322504a8f2ed0b69 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 12 Apr 2013 06:27:37 +0000
-Subject: [PATCH 118/137] DT: MIPS: ralink: add RT2880 dts files
+Subject: [PATCH 34/79] DT: MIPS: ralink: add RT2880 dts files
 
 Add a dtsi file for RT2880 SoC and a sample dts file.
 
@@ -17,6 +17,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5188/
  create mode 100644 arch/mips/ralink/dts/rt2880.dtsi
  create mode 100644 arch/mips/ralink/dts/rt2880_eval.dts
 
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 86f6c77..2f6fbb8 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -34,6 +34,10 @@ choice
@@ -30,11 +32,16 @@ Patchwork: http://patchwork.linux-mips.org/patch/5188/
  	config DTB_RT305X_EVAL
  		bool "RT305x eval kit"
  		depends on SOC_RT305X
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+index 1a69fb3..f635a01 100644
 --- a/arch/mips/ralink/dts/Makefile
 +++ b/arch/mips/ralink/dts/Makefile
 @@ -1 +1,2 @@
 +obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
  obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
+diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
+new file mode 100644
+index 0000000..182afde
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt2880.dtsi
 @@ -0,0 +1,58 @@
@@ -96,6 +103,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5188/
 +		};
 +	};
 +};
+diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
+new file mode 100644
+index 0000000..322d700
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt2880_eval.dts
 @@ -0,0 +1,46 @@
@@ -145,3 +155,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5188/
 +		};
 +	};
 +};
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0119-DT-MIPS-ralink-add-RT3883-dts-files.patch b/target/linux/ramips/patches-3.8/0035-DT-MIPS-ralink-add-RT3883-dts-files.patch
index 90b50eda72..e416036391 100644
--- a/target/linux/ramips/patches-3.8/0119-DT-MIPS-ralink-add-RT3883-dts-files.patch
+++ b/target/linux/ramips/patches-3.8/0035-DT-MIPS-ralink-add-RT3883-dts-files.patch
@@ -1,7 +1,7 @@
-From 8b02459b5aa171dc8726698c4b19341a4e441bb8 Mon Sep 17 00:00:00 2001
+From d702c2e334db0a75298654b12755fd5879dd29df Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 12 Apr 2013 06:27:39 +0000
-Subject: [PATCH 119/137] DT: MIPS: ralink: add RT3883 dts files
+Subject: [PATCH 35/79] DT: MIPS: ralink: add RT3883 dts files
 
 Add a dtsi file for RT3883 SoC and a sample dts file.
 
@@ -17,6 +17,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5189/
  create mode 100644 arch/mips/ralink/dts/rt3883.dtsi
  create mode 100644 arch/mips/ralink/dts/rt3883_eval.dts
 
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 2f6fbb8..493411f 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -42,6 +42,10 @@ choice
@@ -30,12 +32,17 @@ Patchwork: http://patchwork.linux-mips.org/patch/5189/
  endchoice
  
  endif
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+index f635a01..040a986 100644
 --- a/arch/mips/ralink/dts/Makefile
 +++ b/arch/mips/ralink/dts/Makefile
 @@ -1,2 +1,3 @@
  obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
  obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
 +obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
+diff --git a/arch/mips/ralink/dts/rt3883.dtsi b/arch/mips/ralink/dts/rt3883.dtsi
+new file mode 100644
+index 0000000..3b131dd
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt3883.dtsi
 @@ -0,0 +1,58 @@
@@ -97,6 +104,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5189/
 +		};
 +	};
 +};
+diff --git a/arch/mips/ralink/dts/rt3883_eval.dts b/arch/mips/ralink/dts/rt3883_eval.dts
+new file mode 100644
+index 0000000..2fa6b33
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt3883_eval.dts
 @@ -0,0 +1,16 @@
@@ -116,3 +126,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5189/
 +		bootargs = "console=ttyS0,57600";
 +	};
 +};
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0120-DT-MIPS-ralink-add-MT7620A-dts-files.patch b/target/linux/ramips/patches-3.8/0036-DT-MIPS-ralink-add-MT7620A-dts-files.patch
index 82a3086c17..1013c1929b 100644
--- a/target/linux/ramips/patches-3.8/0120-DT-MIPS-ralink-add-MT7620A-dts-files.patch
+++ b/target/linux/ramips/patches-3.8/0036-DT-MIPS-ralink-add-MT7620A-dts-files.patch
@@ -1,7 +1,7 @@
-From 07741f61fc94fad3c3d21fa1a2ad6f01455cc1dd Mon Sep 17 00:00:00 2001
+From 0757f88781dca6b29de4e1578a4900715371a926 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 12 Apr 2013 06:27:41 +0000
-Subject: [PATCH 120/137] DT: MIPS: ralink: add MT7620A dts files
+Subject: [PATCH 36/79] DT: MIPS: ralink: add MT7620A dts files
 
 Add a dtsi file for MT7620A SoC and a sample dts file.
 
@@ -17,6 +17,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5190/
  create mode 100644 arch/mips/ralink/dts/mt7620a.dtsi
  create mode 100644 arch/mips/ralink/dts/mt7620a_eval.dts
 
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 493411f..026e823 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -46,6 +46,10 @@ choice
@@ -30,6 +32,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5190/
  endchoice
  
  endif
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+index 040a986..18194fa 100644
 --- a/arch/mips/ralink/dts/Makefile
 +++ b/arch/mips/ralink/dts/Makefile
 @@ -1,3 +1,4 @@
@@ -37,6 +41,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5190/
  obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
  obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
 +obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
+diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi
+new file mode 100644
+index 0000000..08bf24f
 --- /dev/null
 +++ b/arch/mips/ralink/dts/mt7620a.dtsi
 @@ -0,0 +1,58 @@
@@ -98,6 +105,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5190/
 +		};
 +	};
 +};
+diff --git a/arch/mips/ralink/dts/mt7620a_eval.dts b/arch/mips/ralink/dts/mt7620a_eval.dts
+new file mode 100644
+index 0000000..35eb874
 --- /dev/null
 +++ b/arch/mips/ralink/dts/mt7620a_eval.dts
 @@ -0,0 +1,16 @@
@@ -117,3 +127,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5190/
 +		bootargs = "console=ttyS0,57600";
 +	};
 +};
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0121-MIPS-add-detect_memory_region.patch b/target/linux/ramips/patches-3.8/0037-MIPS-add-detect_memory_region.patch
index 8736e246b6..2f5626efd0 100644
--- a/target/linux/ramips/patches-3.8/0121-MIPS-add-detect_memory_region.patch
+++ b/target/linux/ramips/patches-3.8/0037-MIPS-add-detect_memory_region.patch
@@ -1,7 +1,7 @@
-From 9041c96ab5bd29d85ca95cffa44c755f68ae6bb1 Mon Sep 17 00:00:00 2001
+From 3350a0d29bc3f3d15b50835a20ffcc14a458e2d9 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 13 Apr 2013 13:15:47 +0200
-Subject: [PATCH 121/137] MIPS: add detect_memory_region()
+Subject: [PATCH 37/79] MIPS: add detect_memory_region()
 
 Add a generic way of detecting the available RAM. This function is based on the
 implementation already used by ath79.
@@ -13,6 +13,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5178/
  arch/mips/kernel/setup.c         |   20 ++++++++++++++++++++
  2 files changed, 21 insertions(+)
 
+diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
+index 7a51d87..6d6cfac 100644
 --- a/arch/mips/include/asm/bootinfo.h
 +++ b/arch/mips/include/asm/bootinfo.h
 @@ -104,6 +104,7 @@ struct boot_mem_map {
@@ -23,6 +25,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5178/
  
  extern void prom_init(void);
  extern void prom_free_prom_memory(void);
+diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
+index 8c41187..3937630 100644
 --- a/arch/mips/kernel/setup.c
 +++ b/arch/mips/kernel/setup.c
 @@ -23,6 +23,7 @@
@@ -33,7 +37,7 @@ Patchwork: http://patchwork.linux-mips.org/patch/5178/
  
  #include <asm/addrspace.h>
  #include <asm/bootinfo.h>
-@@ -122,6 +123,25 @@ void __init add_memory_region(phys_t sta
+@@ -122,6 +123,25 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
  	boot_mem_map.nr_map++;
  }
  
@@ -59,3 +63,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5178/
  static void __init print_memory_map(void)
  {
  	int i;
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0038-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch b/target/linux/ramips/patches-3.8/0038-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch
new file mode 100644
index 0000000000..36fc72a1b6
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0038-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch
@@ -0,0 +1,34 @@
+From cfad83f59816f2be69a22955a398906d749ab108 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 13 Apr 2013 15:10:14 +0200
+Subject: [PATCH 38/79] MIPS: ralink: add memory definition to struct
+ ralink_soc_info
+
+Depending on the actual SoC we have a different base address as well as minimum
+and maximum size for RAM. Add these fields to the per SoC structure.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5179/
+---
+ arch/mips/ralink/common.h |    5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index 299119b..83144c3 100644
+--- a/arch/mips/ralink/common.h
++++ b/arch/mips/ralink/common.h
+@@ -33,6 +33,11 @@ extern struct ralink_pinmux rt_gpio_pinmux;
+ struct ralink_soc_info {
+ 	unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
+ 	unsigned char *compatible;
++
++	unsigned long mem_base;
++	unsigned long mem_size;
++	unsigned long mem_size_min;
++	unsigned long mem_size_max;
+ };
+ extern struct ralink_soc_info soc_info;
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0039-MIPS-ralink-add-memory-definition-for-RT305x.patch b/target/linux/ramips/patches-3.8/0039-MIPS-ralink-add-memory-definition-for-RT305x.patch
new file mode 100644
index 0000000000..6738d9e623
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0039-MIPS-ralink-add-memory-definition-for-RT305x.patch
@@ -0,0 +1,96 @@
+From 7d0aa01494353532bbdc644469ef2a06ee089f3e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 13 Apr 2013 15:13:40 +0200
+Subject: [PATCH 39/79] MIPS: ralink: add memory definition for RT305x
+
+Populate struct soc_info with the data that describes our RAM window.
+
+As memory detection fails on RT5350 we read the amount of available memory
+from the system controller.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5180/
+---
+ arch/mips/include/asm/mach-ralink/rt305x.h |    6 ++++
+ arch/mips/ralink/rt305x.c                  |   45 ++++++++++++++++++++++++++++
+ 2 files changed, 51 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
+index 80cda8a..069bf37 100644
+--- a/arch/mips/include/asm/mach-ralink/rt305x.h
++++ b/arch/mips/include/asm/mach-ralink/rt305x.h
+@@ -157,4 +157,10 @@ static inline int soc_is_rt5350(void)
+ #define RT3352_RSTCTRL_UDEV		BIT(25)
+ #define RT3352_SYSCFG1_USB0_HOST_MODE	BIT(10)
+ 
++#define RT305X_SDRAM_BASE		0x00000000
++#define RT305X_MEM_SIZE_MIN		2
++#define RT305X_MEM_SIZE_MAX		64
++#define RT3352_MEM_SIZE_MIN		2
++#define RT3352_MEM_SIZE_MAX		256
++
+ #endif
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index 6aa3cb1..ca7ee3a 100644
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -122,6 +122,40 @@ struct ralink_pinmux rt_gpio_pinmux = {
+ 	.wdt_reset = rt305x_wdt_reset,
+ };
+ 
++static unsigned long rt5350_get_mem_size(void)
++{
++	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
++	unsigned long ret;
++	u32 t;
++
++	t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
++	t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
++		RT5350_SYSCFG0_DRAM_SIZE_MASK;
++
++	switch (t) {
++	case RT5350_SYSCFG0_DRAM_SIZE_2M:
++		ret = 2;
++		break;
++	case RT5350_SYSCFG0_DRAM_SIZE_8M:
++		ret = 8;
++		break;
++	case RT5350_SYSCFG0_DRAM_SIZE_16M:
++		ret = 16;
++		break;
++	case RT5350_SYSCFG0_DRAM_SIZE_32M:
++		ret = 32;
++		break;
++	case RT5350_SYSCFG0_DRAM_SIZE_64M:
++		ret = 64;
++		break;
++	default:
++		panic("rt5350: invalid DRAM size: %u", t);
++		break;
++	}
++
++	return ret;
++}
++
+ void __init ralink_clk_init(void)
+ {
+ 	unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
+@@ -252,4 +286,15 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ 		name,
+ 		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+ 		(id & CHIP_ID_REV_MASK));
++
++	soc_info->mem_base = RT305X_SDRAM_BASE;
++	if (soc_is_rt5350()) {
++		soc_info->mem_size = rt5350_get_mem_size();
++	} else if (soc_is_rt305x() || soc_is_rt3350()) {
++		soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
++		soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
++	} else if (soc_is_rt3352()) {
++		soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
++		soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
++	}
+ }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0040-MIPS-ralink-add-memory-definition-for-RT2880.patch b/target/linux/ramips/patches-3.8/0040-MIPS-ralink-add-memory-definition-for-RT2880.patch
new file mode 100644
index 0000000000..e09d5b713f
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0040-MIPS-ralink-add-memory-definition-for-RT2880.patch
@@ -0,0 +1,43 @@
+From 1ca89d8a262f27f4ecd45d40b6774c415842421a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 13 Apr 2013 15:37:37 +0200
+Subject: [PATCH 40/79] MIPS: ralink: add memory definition for RT2880
+
+Populate struct soc_info with the data that describes our RAM window.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5181/
+---
+ arch/mips/include/asm/mach-ralink/rt288x.h |    4 ++++
+ arch/mips/ralink/rt288x.c                  |    4 ++++
+ 2 files changed, 8 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h
+index ad8b42d..03ad716 100644
+--- a/arch/mips/include/asm/mach-ralink/rt288x.h
++++ b/arch/mips/include/asm/mach-ralink/rt288x.h
+@@ -46,4 +46,8 @@
+ 
+ #define CLKCFG_SRAM_CS_N_WDT		BIT(9)
+ 
++#define RT2880_SDRAM_BASE		0x08000000
++#define RT2880_MEM_SIZE_MIN		2
++#define RT2880_MEM_SIZE_MAX		128
++
+ #endif
+diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
+index 1e0788e..f87de1a 100644
+--- a/arch/mips/ralink/rt288x.c
++++ b/arch/mips/ralink/rt288x.c
+@@ -136,4 +136,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ 		name,
+ 		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+ 		(id & CHIP_ID_REV_MASK));
++
++	soc_info->mem_base = RT2880_SDRAM_BASE;
++	soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
++	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
+ }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0041-MIPS-ralink-add-memory-definition-for-RT3883.patch b/target/linux/ramips/patches-3.8/0041-MIPS-ralink-add-memory-definition-for-RT3883.patch
new file mode 100644
index 0000000000..1160906c9e
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0041-MIPS-ralink-add-memory-definition-for-RT3883.patch
@@ -0,0 +1,51 @@
+From 42a816a8312734e6b438e799378044365e229a07 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 13 Apr 2013 20:23:19 +0200
+Subject: [PATCH 41/79] MIPS: ralink: add memory definition for RT3883
+
+Populate struct soc_info with the data that describes our RAM window.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5182/
+---
+ arch/mips/include/asm/mach-ralink/rt3883.h |    5 +++++
+ arch/mips/ralink/rt3883.c                  |    4 ++++
+ 2 files changed, 9 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
+index b91c6c1..058382f 100644
+--- a/arch/mips/include/asm/mach-ralink/rt3883.h
++++ b/arch/mips/include/asm/mach-ralink/rt3883.h
+@@ -152,6 +152,7 @@
+ #define RT3883_GPIO_SPI_MISO		6
+ #define RT3883_GPIO_7			7
+ #define RT3883_GPIO_10			10
++#define RT3883_GPIO_11			11
+ #define RT3883_GPIO_14			14
+ #define RT3883_GPIO_UART1_TXD		15
+ #define RT3883_GPIO_UART1_RXD		16
+@@ -244,4 +245,8 @@
+ #define RT3883_FLASH_CFG_WIDTH_16BIT	0x1
+ #define RT3883_FLASH_CFG_WIDTH_32BIT	0x2
+ 
++#define RT3883_SDRAM_BASE		0x00000000
++#define RT3883_MEM_SIZE_MIN		2
++#define RT3883_MEM_SIZE_MAX		256
++
+ #endif /* _RT3883_REGS_H_ */
+diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
+index 2d90aa9..afbf2ce 100644
+--- a/arch/mips/ralink/rt3883.c
++++ b/arch/mips/ralink/rt3883.c
+@@ -239,4 +239,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ 		name,
+ 		(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
+ 		(id & RT3883_REVID_ECO_ID_MASK));
++
++	soc_info->mem_base = RT3883_SDRAM_BASE;
++	soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
++	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
+ }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0042-MIPS-ralink-add-memory-definition-for-MT7620.patch b/target/linux/ramips/patches-3.8/0042-MIPS-ralink-add-memory-definition-for-MT7620.patch
new file mode 100644
index 0000000000..da2610ce9c
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0042-MIPS-ralink-add-memory-definition-for-MT7620.patch
@@ -0,0 +1,65 @@
+From e7dfbb1eafed754442099a33492a9e90fa33d3fa Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 14 Apr 2013 09:55:29 +0200
+Subject: [PATCH 42/79] MIPS: ralink: add memory definition for MT7620
+
+Populate struct soc_info with the data that describes our RAM window.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5183/
+---
+ arch/mips/include/asm/mach-ralink/mt7620.h |    8 ++++++++
+ arch/mips/ralink/mt7620.c                  |   20 ++++++++++++++++++++
+ 2 files changed, 28 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index b272649..9809972 100644
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -50,6 +50,14 @@
+ #define SYSCFG0_DRAM_TYPE_DDR1		1
+ #define SYSCFG0_DRAM_TYPE_DDR2		2
+ 
++#define MT7620_DRAM_BASE		0x0
++#define MT7620_SDRAM_SIZE_MIN		2
++#define MT7620_SDRAM_SIZE_MAX		64
++#define MT7620_DDR1_SIZE_MIN		32
++#define MT7620_DDR1_SIZE_MAX		128
++#define MT7620_DDR2_SIZE_MIN		32
++#define MT7620_DDR2_SIZE_MAX		256
++
+ #define MT7620_GPIO_MODE_I2C		BIT(0)
+ #define MT7620_GPIO_MODE_UART0_SHIFT	2
+ #define MT7620_GPIO_MODE_UART0_MASK	0x7
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index eb00ab8..98ddb93 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -211,4 +211,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ 
+ 	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
+ 	dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
++
++	switch (dram_type) {
++	case SYSCFG0_DRAM_TYPE_SDRAM:
++		soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
++		soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
++		break;
++
++	case SYSCFG0_DRAM_TYPE_DDR1:
++		soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
++		soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
++		break;
++
++	case SYSCFG0_DRAM_TYPE_DDR2:
++		soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
++		soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
++		break;
++	default:
++		BUG();
++	}
++	soc_info->mem_base = MT7620_DRAM_BASE;
+ }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0043-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch b/target/linux/ramips/patches-3.8/0043-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch
new file mode 100644
index 0000000000..1b6acf0835
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0043-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch
@@ -0,0 +1,45 @@
+From 6142d0fa1c7ba6050664a27d7cca87043217b01f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 13 Apr 2013 15:15:51 +0200
+Subject: [PATCH 43/79] MIPS: ralink: make use of the new memory detection
+ code
+
+Call detect_memory_region() from plat_mem_setup() unless the size was already
+read from the system controller.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5184/
+---
+ arch/mips/ralink/of.c |    9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index 4165e70..fb15695 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -11,6 +11,7 @@
+ #include <linux/io.h>
+ #include <linux/clk.h>
+ #include <linux/init.h>
++#include <linux/sizes.h>
+ #include <linux/of_fdt.h>
+ #include <linux/kernel.h>
+ #include <linux/bootmem.h>
+@@ -85,6 +86,14 @@ void __init plat_mem_setup(void)
+ 	 * parsed resulting in our memory appearing
+ 	 */
+ 	__dt_setup_arch(&__dtb_start);
++
++	if (soc_info.mem_size)
++		add_memory_region(soc_info.mem_base, soc_info.mem_size,
++				  BOOT_MEM_RAM);
++	else
++		detect_memory_region(soc_info.mem_base,
++				     soc_info.mem_size_min * SZ_1M,
++				     soc_info.mem_size_max * SZ_1M);
+ }
+ 
+ static int __init plat_of_setup(void)
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0044-MIPS-ralink-upstream-v3.10.patch b/target/linux/ramips/patches-3.8/0044-MIPS-ralink-upstream-v3.10.patch
new file mode 100644
index 0000000000..0ebbfe5fdf
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0044-MIPS-ralink-upstream-v3.10.patch
@@ -0,0 +1,23 @@
+From b6038567015683bc9541e2bee1b9bc0db50589a3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 30 May 2013 16:16:13 +0200
+Subject: [PATCH 44/79] MIPS: ralink: upstream v3.10
+
+patches prior to this were sent upstream and accepted for v3.10
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ dummy |    1 +
+ 1 file changed, 1 insertion(+)
+ create mode 100644 dummy
+
+diff --git a/dummy b/dummy
+new file mode 100644
+index 0000000..421376d
+--- /dev/null
++++ b/dummy
+@@ -0,0 +1 @@
++dummy
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0128-MIPS-ralink-add-pinmux-driver.patch b/target/linux/ramips/patches-3.8/0045-MIPS-ralink-add-pinmux-driver.patch
index f28115cd18..546719df98 100644
--- a/target/linux/ramips/patches-3.8/0128-MIPS-ralink-add-pinmux-driver.patch
+++ b/target/linux/ramips/patches-3.8/0045-MIPS-ralink-add-pinmux-driver.patch
@@ -1,7 +1,7 @@
-From 5a2079532dfaf5762f658370ee7a0afb686f066e Mon Sep 17 00:00:00 2001
+From c7107291df4035794c67d7a904fe7419fedc5922 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Mon, 22 Apr 2013 23:11:42 +0200
-Subject: [PATCH 128/137] MIPS: ralink: add pinmux driver
+Subject: [PATCH 45/79] MIPS: ralink: add pinmux driver
 
 Add code to setup the pinmux on ralonk SoC. The SoC has a single 32 bit register
 for this functionality with simple on/off bits. Building a full featured pinctrl
@@ -12,10 +12,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/ralink/Makefile |    2 +-
  arch/mips/ralink/common.h |    2 ++
  arch/mips/ralink/of.c     |    2 ++
- arch/mips/ralink/pinmux.c |   76 +++++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 81 insertions(+), 1 deletion(-)
+ arch/mips/ralink/pinmux.c |   77 +++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 82 insertions(+), 1 deletion(-)
  create mode 100644 arch/mips/ralink/pinmux.c
 
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 38cf1a8..341b4de 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -6,7 +6,7 @@
@@ -27,15 +29,19 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  obj-$(CONFIG_SOC_RT288X) += rt288x.o
  obj-$(CONFIG_SOC_RT305X) += rt305x.o
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index 83144c3..f113fd6 100644
 --- a/arch/mips/ralink/common.h
 +++ b/arch/mips/ralink/common.h
-@@ -50,4 +50,6 @@ extern void prom_soc_init(struct ralink_
+@@ -50,4 +50,6 @@ extern void prom_soc_init(struct ralink_soc_info *soc_info);
  
  __iomem void *plat_of_remap_node(const char *node);
  
 +void ralink_pinmux(void);
 +
  #endif /* _RALINK_COMMON_H__ */
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index fb15695..f916774 100644
 --- a/arch/mips/ralink/of.c
 +++ b/arch/mips/ralink/of.c
 @@ -110,6 +110,8 @@ static int __init plat_of_setup(void)
@@ -47,6 +53,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	return 0;
  }
  
+diff --git a/arch/mips/ralink/pinmux.c b/arch/mips/ralink/pinmux.c
+new file mode 100644
+index 0000000..1720216
 --- /dev/null
 +++ b/arch/mips/ralink/pinmux.c
 @@ -0,0 +1,77 @@
@@ -127,3 +136,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +	rt_sysc_w32(mode, SYSC_REG_GPIO_MODE);
 +}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0046-MIPS-ralink-add-support-for-periodic-timer-irq.patch b/target/linux/ramips/patches-3.8/0046-MIPS-ralink-add-support-for-periodic-timer-irq.patch
new file mode 100644
index 0000000000..18e001cc06
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0046-MIPS-ralink-add-support-for-periodic-timer-irq.patch
@@ -0,0 +1,228 @@
+From f14edca84cd854dac7dd429b1fbeb80ac76fca16 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 23 Mar 2013 19:44:41 +0100
+Subject: [PATCH 46/79] MIPS: ralink: add support for periodic timer irq
+
+Adds a driver for the periodic timer found on Ralink SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Makefile |    2 +-
+ arch/mips/ralink/timer.c  |  192 +++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 193 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/ralink/timer.c
+
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 341b4de..cae7d88 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -6,7 +6,7 @@
+ # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+ # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ 
+-obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o
++obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o
+ 
+ obj-$(CONFIG_SOC_RT288X) += rt288x.o
+ obj-$(CONFIG_SOC_RT305X) += rt305x.o
+diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
+new file mode 100644
+index 0000000..0a6856c
+--- /dev/null
++++ b/arch/mips/ralink/timer.c
+@@ -0,0 +1,192 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++*/
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <linux/timer.h>
++#include <linux/of_gpio.h>
++#include <linux/clk.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define TIMER_REG_TMRSTAT		0x00
++#define TIMER_REG_TMR0LOAD		0x10
++#define TIMER_REG_TMR0CTL		0x18
++
++#define TMRSTAT_TMR0INT			BIT(0)
++
++#define TMR0CTL_ENABLE			BIT(7)
++#define TMR0CTL_MODE_PERIODIC		BIT(4)
++#define TMR0CTL_PRESCALER		1
++#define TMR0CTL_PRESCALE_VAL		(0xf - TMR0CTL_PRESCALER)
++#define TMR0CTL_PRESCALE_DIV		(65536 / BIT(TMR0CTL_PRESCALER))
++
++struct rt_timer {
++	struct device	*dev;
++	void __iomem	*membase;
++	int		irq;
++	unsigned long	timer_freq;
++	unsigned long	timer_div;
++};
++
++static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
++{
++	__raw_writel(val, rt->membase + reg);
++}
++
++static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
++{
++	return __raw_readl(rt->membase + reg);
++}
++
++static irqreturn_t rt_timer_irq(int irq, void *_rt)
++{
++	struct rt_timer *rt =  (struct rt_timer *) _rt;
++
++	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
++	rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
++
++	return IRQ_HANDLED;
++}
++
++
++static int rt_timer_request(struct rt_timer *rt)
++{
++	int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED,
++						dev_name(rt->dev), rt);
++	if (err) {
++		dev_err(rt->dev, "failed to request irq\n");
++	} else {
++		u32 t = TMR0CTL_MODE_PERIODIC | TMR0CTL_PRESCALE_VAL;
++		rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
++	}
++	return err;
++}
++
++static void rt_timer_free(struct rt_timer *rt)
++{
++	free_irq(rt->irq, rt);
++}
++
++static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
++{
++	if (rt->timer_freq < divisor)
++		rt->timer_div = rt->timer_freq;
++	else
++		rt->timer_div = divisor;
++
++	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
++
++	return 0;
++}
++
++static int rt_timer_enable(struct rt_timer *rt)
++{
++	u32 t;
++
++	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
++
++	t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
++	t |= TMR0CTL_ENABLE;
++	rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
++
++	return 0;
++}
++
++static void rt_timer_disable(struct rt_timer *rt)
++{
++	u32 t;
++
++	t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
++	t &= ~TMR0CTL_ENABLE;
++	rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
++}
++
++static int rt_timer_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	struct rt_timer *rt;
++	struct clk *clk;
++
++	if (!res) {
++		dev_err(&pdev->dev, "no memory resource found\n");
++		return -EINVAL;
++	}
++
++	rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
++	if (!rt) {
++		dev_err(&pdev->dev, "failed to allocate memory\n");
++		return -ENOMEM;
++	}
++
++	rt->irq = platform_get_irq(pdev, 0);
++	if (!rt->irq) {
++		dev_err(&pdev->dev, "failed to load irq\n");
++		return -ENOENT;
++	}
++
++	rt->membase = devm_request_and_ioremap(&pdev->dev, res);
++	if (!rt->membase) {
++		dev_err(&pdev->dev, "failed to ioremap\n");
++		return -ENOMEM;
++	}
++
++	clk = devm_clk_get(&pdev->dev, NULL);
++	if (IS_ERR(clk)) {
++		dev_err(&pdev->dev, "failed get clock rate\n");
++		return PTR_ERR(clk);
++	}
++
++	rt->timer_freq = clk_get_rate(clk) / TMR0CTL_PRESCALE_DIV;
++	if (!rt->timer_freq)
++		return -EINVAL;
++
++	rt->dev = &pdev->dev;
++	platform_set_drvdata(pdev, rt);
++
++	rt_timer_request(rt);
++	rt_timer_config(rt, 2);
++	rt_timer_enable(rt);
++
++	dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
++
++	return 0;
++}
++
++static int rt_timer_remove(struct platform_device *pdev)
++{
++	struct rt_timer *rt = platform_get_drvdata(pdev);
++
++	rt_timer_disable(rt);
++	rt_timer_free(rt);
++
++	return 0;
++}
++
++static const struct of_device_id rt_timer_match[] = {
++	{ .compatible = "ralink,rt2880-timer" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, rt_timer_match);
++
++static struct platform_driver rt_timer_driver = {
++	.probe = rt_timer_probe,
++	.remove = rt_timer_remove,
++	.driver = {
++		.name		= "rt-timer",
++		.owner          = THIS_MODULE,
++		.of_match_table	= rt_timer_match
++	},
++};
++
++module_platform_driver(rt_timer_driver);
++
++MODULE_DESCRIPTION("Ralink RT2880 timer");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
++MODULE_LICENSE("GPL");
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0047-MIPS-ralink-add-rt_sysc_m32-helper.patch b/target/linux/ramips/patches-3.8/0047-MIPS-ralink-add-rt_sysc_m32-helper.patch
new file mode 100644
index 0000000000..6afdb5a2d3
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0047-MIPS-ralink-add-rt_sysc_m32-helper.patch
@@ -0,0 +1,31 @@
+From f7a5af8f5a3a4bc80a0c297c16c661d72ae356b4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 19 May 2013 00:42:23 +0200
+Subject: [PATCH 47/79] MIPS: ralink: add rt_sysc_m32 helper
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/ralink_regs.h |    7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
+index 5a508f9..bd93014 100644
+--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
++++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
+@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned reg)
+ 	return __raw_readl(rt_sysc_membase + reg);
+ }
+ 
++static inline void rt_sysc_m32(u32 clr, u32 set, unsigned reg)
++{
++	u32 val = rt_sysc_r32(reg) & ~clr;
++
++	__raw_writel(val | set, rt_sysc_membase + reg);
++}
++
+ static inline void rt_memc_w32(u32 val, unsigned reg)
+ {
+ 	__raw_writel(val, rt_memc_membase + reg);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0048-MIPS-ralink-make-mt7620-ram-detect-verbose.patch b/target/linux/ramips/patches-3.8/0048-MIPS-ralink-make-mt7620-ram-detect-verbose.patch
new file mode 100644
index 0000000000..d17c227649
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0048-MIPS-ralink-make-mt7620-ram-detect-verbose.patch
@@ -0,0 +1,39 @@
+From 8c2015a6eed656d8578a78e392625869ba8f9bb4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 20 May 2013 20:30:11 +0200
+Subject: [PATCH 48/79] MIPS: ralink: make mt7620 ram detect verbose
+
+Make the code print which of SDRAM, DDR1 or DDR2 was detected.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c |    3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 98ddb93..28350d0 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -214,16 +214,19 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ 
+ 	switch (dram_type) {
+ 	case SYSCFG0_DRAM_TYPE_SDRAM:
++		pr_info("Board has SDRAM\n");
+ 		soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
+ 		soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
+ 		break;
+ 
+ 	case SYSCFG0_DRAM_TYPE_DDR1:
++		pr_info("Board has DDR1\n");
+ 		soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+ 		soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+ 		break;
+ 
+ 	case SYSCFG0_DRAM_TYPE_DDR2:
++		pr_info("Board has DDR2\n");
+ 		soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+ 		soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+ 		break;
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0049-MIPS-ralink-add-verbose-pmu-info.patch b/target/linux/ramips/patches-3.8/0049-MIPS-ralink-add-verbose-pmu-info.patch
new file mode 100644
index 0000000000..206e9d8473
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0049-MIPS-ralink-add-verbose-pmu-info.patch
@@ -0,0 +1,64 @@
+From 1652cf71db797b249c0d384e6c3d31b312b7012e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 20 May 2013 20:57:09 +0200
+Subject: [PATCH 49/79] MIPS: ralink: add verbose pmu info
+
+Print the PMU and LDO settings on boot.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c |   26 ++++++++++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 28350d0..69729a5 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -20,6 +20,22 @@
+ 
+ #include "common.h"
+ 
++/* analog */
++#define PMU0_CFG		0x88
++#define PMU_SW_SET		BIT(28)
++#define A_DCDC_EN		BIT(24)
++#define A_SSC_PERI		BIT(19)
++#define A_SSC_GEN		BIT(18)
++#define A_SSC_M			0x3
++#define A_SSC_S			16
++#define A_DLY_M			0x7
++#define A_DLY_S			8
++#define A_VTUNE_M		0xff
++
++/* digital */
++#define PMU1_CFG		0x8C
++#define DIG_SW_SEL		BIT(25)
++
+ /* does the board have sdram or ddram */
+ static int dram_type;
+ 
+@@ -187,6 +203,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ 	u32 n1;
+ 	u32 rev;
+ 	u32 cfg0;
++	u32 pmu0;
++	u32 pmu1;
+ 
+ 	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ 	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+@@ -234,4 +252,12 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ 		BUG();
+ 	}
+ 	soc_info->mem_base = MT7620_DRAM_BASE;
++
++	pmu0 = __raw_readl(sysc + PMU0_CFG);
++	pmu1 = __raw_readl(sysc + PMU1_CFG);
++
++	pr_info("Analog PMU set to %s control\n",
++		(pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
++	pr_info("Digital PMU set to %s control\n",
++		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+ }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0050-MIPS-ralink-adds-a-bootrom-dumper-module.patch b/target/linux/ramips/patches-3.8/0050-MIPS-ralink-adds-a-bootrom-dumper-module.patch
new file mode 100644
index 0000000000..893a4083ed
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0050-MIPS-ralink-adds-a-bootrom-dumper-module.patch
@@ -0,0 +1,83 @@
+From d0d5dff525d921a7200d4919ea46c51fce27b7fb Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 May 2013 15:50:31 +0200
+Subject: [PATCH 50/79] MIPS: ralink: adds a bootrom dumper module
+
+This patch adds a trivial driver that allows userland to extract the bootrom of
+a SoC via debugfs.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Makefile  |    2 ++
+ arch/mips/ralink/bootrom.c |   48 ++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 50 insertions(+)
+ create mode 100644 arch/mips/ralink/bootrom.c
+
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index cae7d88..5fa6129 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -15,4 +15,6 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o
+ 
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+ 
++obj-$(CONFIG_DEBUG_FS) += bootrom.o
++
+ obj-y += dts/
+diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c
+new file mode 100644
+index 0000000..f926f6f
+--- /dev/null
++++ b/arch/mips/ralink/bootrom.c
+@@ -0,0 +1,48 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/debugfs.h>
++#include <linux/seq_file.h>
++
++#define BOOTROM_OFFSET	0x10118000
++#define BOOTROM_SIZE	0x8000
++
++static void __iomem *membase = (void __iomem*) KSEG1ADDR(BOOTROM_OFFSET);
++
++static int bootrom_show(struct seq_file *s, void *unused)
++{
++	seq_write(s, membase, BOOTROM_SIZE);
++
++	return 0;
++}
++
++static int bootrom_open(struct inode *inode, struct file *file)
++{
++	return single_open(file, bootrom_show, NULL);
++}
++
++static const struct file_operations bootrom_file_ops = {
++	.open		= bootrom_open,
++	.read		= seq_read,
++	.llseek		= seq_lseek,
++	.release	= single_release,
++};
++
++static int bootrom_setup(void)
++{
++	if (!debugfs_create_file("bootrom", 0444,
++			NULL, NULL, &bootrom_file_ops)) {
++		pr_err("Failed to create bootrom debugfs file\n");
++
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++postcore_initcall(bootrom_setup);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0051-MIPS-ralink-add-missing-SZ_1M-multiplier.patch b/target/linux/ramips/patches-3.8/0051-MIPS-ralink-add-missing-SZ_1M-multiplier.patch
new file mode 100644
index 0000000000..161674ed23
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0051-MIPS-ralink-add-missing-SZ_1M-multiplier.patch
@@ -0,0 +1,29 @@
+From 1996ffa03b1c6e0ab7db35dfd910923f4ab54b26 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 May 2013 17:15:54 +0200
+Subject: [PATCH 51/79] MIPS: ralink: add missing SZ_1M multiplier
+
+On RT5350 the memory size is set to Bytes and not MegaBytes due to a missing
+multiplier.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index f916774..b25c1f2 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -88,7 +88,7 @@ void __init plat_mem_setup(void)
+ 	__dt_setup_arch(&__dtb_start);
+ 
+ 	if (soc_info.mem_size)
+-		add_memory_region(soc_info.mem_base, soc_info.mem_size,
++		add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
+ 				  BOOT_MEM_RAM);
+ 	else
+ 		detect_memory_region(soc_info.mem_base,
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0052-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-3.8/0052-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
new file mode 100644
index 0000000000..0a6ecc4134
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0052-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
@@ -0,0 +1,78 @@
+From b9afea3f5cf6c2da3b88f2902c4377e9c5b22a6d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 3 May 2013 00:04:58 +0200
+Subject: [PATCH 52/79] MIPS: use set_mode() to enable/disable the cevt-r4k
+ irq
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/kernel/cevt-r4k.c |   39 ++++++++++++++++++++++++++-------------
+ 1 file changed, 26 insertions(+), 13 deletions(-)
+
+diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
+index 7532392..afc08e4 100644
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -39,12 +39,6 @@ static int mips_next_event(unsigned long delta,
+ 
+ #endif /* CONFIG_MIPS_MT_SMTC */
+ 
+-void mips_set_clock_mode(enum clock_event_mode mode,
+-				struct clock_event_device *evt)
+-{
+-	/* Nothing to do ...  */
+-}
+-
+ DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+ int cp0_timer_irq_installed;
+ 
+@@ -89,6 +83,32 @@ struct irqaction c0_compare_irqaction = {
+ 	.name = "timer",
+ };
+ 
++void mips_set_clock_mode(enum clock_event_mode mode,
++				struct clock_event_device *evt)
++{
++	switch (mode) {
++	case CLOCK_EVT_MODE_ONESHOT:
++		if (cp0_timer_irq_installed)
++			break;
++
++		cp0_timer_irq_installed = 1;
++
++		setup_irq(evt->irq, &c0_compare_irqaction);
++		break;
++
++	case CLOCK_EVT_MODE_SHUTDOWN:
++		if (!cp0_timer_irq_installed)
++			break;
++
++		cp0_timer_irq_installed = 0;
++		free_irq(evt->irq, &c0_compare_irqaction);
++		break;
++
++	default:
++		pr_err("Unhandeled mips clock_mode\n");
++		break;
++	}
++}
+ 
+ void mips_event_handler(struct clock_event_device *dev)
+ {
+@@ -208,13 +228,6 @@ int __cpuinit r4k_clockevent_init(void)
+ 
+ 	clockevents_register_device(cd);
+ 
+-	if (cp0_timer_irq_installed)
+-		return 0;
+-
+-	cp0_timer_irq_installed = 1;
+-
+-	setup_irq(irq, &c0_compare_irqaction);
+-
+ 	return 0;
+ }
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0053-MIPS-ralink-add-illegal-access-driver.patch b/target/linux/ramips/patches-3.8/0053-MIPS-ralink-add-illegal-access-driver.patch
new file mode 100644
index 0000000000..ef2fdb9377
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0053-MIPS-ralink-add-illegal-access-driver.patch
@@ -0,0 +1,121 @@
+From 69a5834d0a90588578df9689530fc8f3ab8ef59a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 16 May 2013 23:28:23 +0200
+Subject: [PATCH 53/79] MIPS: ralink: add illegal access driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Makefile  |    2 +-
+ arch/mips/ralink/ill_acc.c |   87 ++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 88 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/ralink/ill_acc.c
+
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 5fa6129..55a5bfc 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -6,7 +6,7 @@
+ # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+ # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ 
+-obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o
++obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o ill_acc.o
+ 
+ obj-$(CONFIG_SOC_RT288X) += rt288x.o
+ obj-$(CONFIG_SOC_RT305X) += rt305x.o
+diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
+new file mode 100644
+index 0000000..4a3f696
+--- /dev/null
++++ b/arch/mips/ralink/ill_acc.c
+@@ -0,0 +1,87 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/interrupt.h>
++#include <linux/of_platform.h>
++#include <linux/of_irq.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define REG_ILL_ACC_ADDR	0x10
++#define REG_ILL_ACC_TYPE	0x14
++
++#define ILL_INT_STATUS		BIT(31)
++#define ILL_ACC_WRITE		BIT(30)
++#define ILL_ACC_LEN_M		0xff
++#define ILL_ACC_OFF_M		0xf
++#define ILL_ACC_OFF_S		16
++#define ILL_ACC_ID_M		0x7
++#define ILL_ACC_ID_S		8
++
++#define	DRV_NAME		"ill_acc"
++
++static const char *ill_acc_ids[] = {
++	"cpu", "dma", "ppe", "pdma rx","pdma tx", "pci/e", "wmac", "usb",
++};
++
++static irqreturn_t ill_acc_irq_handler(int irq, void *_priv)
++{
++	struct device *dev = (struct device *) _priv;
++	u32 addr = rt_memc_r32(REG_ILL_ACC_ADDR);
++	u32 type = rt_memc_r32(REG_ILL_ACC_TYPE);
++
++	dev_err(dev, "illegal %s access from %s - addr:0x%08x offset:%d len:%d\n",
++		(type & ILL_ACC_WRITE) ? ("write") : ("read"),
++		ill_acc_ids[(type >> ILL_ACC_ID_S) & ILL_ACC_ID_M],
++		addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
++		type & ILL_ACC_LEN_M);
++
++	rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
++
++	return IRQ_HANDLED;
++}
++
++static int __init ill_acc_of_setup(void)
++{
++	struct platform_device *pdev;
++	struct device_node *np;
++	int irq;
++
++	/* somehow this driver breaks on RT5350 */
++	if (of_machine_is_compatible("ralink,rt5350-soc"))
++		return -EINVAL;
++
++	np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-memc");
++	if (!np)
++		return -EINVAL;
++
++	pdev = of_find_device_by_node(np);
++	if (!pdev) {
++		pr_err("%s: failed to lookup pdev\n", np->name);
++		return -EINVAL;
++	}
++
++	irq = irq_of_parse_and_map(np, 0);
++        if (!irq) {
++		dev_err(&pdev->dev, "failed to get irq\n");
++		return -EINVAL;
++	}
++
++	if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
++		dev_err(&pdev->dev, "failed to request irq\n");
++		return -EINVAL;
++	}
++
++	rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
++
++	dev_info(&pdev->dev, "irq registered\n");
++
++	return 0;
++}
++
++arch_initcall(ill_acc_of_setup);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0054-MIPS-ralink-workaround-DTB-memory-issue.patch b/target/linux/ramips/patches-3.8/0054-MIPS-ralink-workaround-DTB-memory-issue.patch
new file mode 100644
index 0000000000..1a550ab89b
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0054-MIPS-ralink-workaround-DTB-memory-issue.patch
@@ -0,0 +1,29 @@
+From 9b6da5fa57a40647f6d69ee1fcdabc5e5f7010dc Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 23 May 2013 18:50:56 +0200
+Subject: [PATCH 54/79] MIPS: ralink: workaround DTB memory issue
+
+If the DTB is too big a bug happens on boot when init ram is freed.
+This is a temporary fix until the real cause is found.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index b25c1f2..8efb02b 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -74,7 +74,7 @@ void __init device_tree_init(void)
+ 	unflatten_device_tree();
+ 
+ 	/* free the space reserved for the dt blob */
+-	free_bootmem(base, size);
++	//free_bootmem(base, size);
+ }
+ 
+ void __init plat_mem_setup(void)
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0055-MIPS-ralink-add-spi-clock-definition-to-mt7620a.patch b/target/linux/ramips/patches-3.8/0055-MIPS-ralink-add-spi-clock-definition-to-mt7620a.patch
new file mode 100644
index 0000000000..b6d91eb66f
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0055-MIPS-ralink-add-spi-clock-definition-to-mt7620a.patch
@@ -0,0 +1,25 @@
+From 148d428995c21cc95350937d42ffd3b13e36daa5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 23 May 2013 18:46:25 +0200
+Subject: [PATCH 55/79] MIPS: ralink: add spi clock definition to mt7620a
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c |    1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 69729a5..08c96db6 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -183,6 +183,7 @@ void __init ralink_clk_init(void)
+ 	ralink_clk_add("cpu", cpu_rate);
+ 	ralink_clk_add("10000100.timer", 40000000);
+ 	ralink_clk_add("10000500.uart", 40000000);
++	ralink_clk_add("10000b00.spi", 40000000);
+ 	ralink_clk_add("10000c00.uartlite", 40000000);
+ }
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0056-MIPS-ralink-DTS-file-updates.patch b/target/linux/ramips/patches-3.8/0056-MIPS-ralink-DTS-file-updates.patch
new file mode 100644
index 0000000000..70816224bc
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0056-MIPS-ralink-DTS-file-updates.patch
@@ -0,0 +1,1006 @@
+From 4f3d8fafc176d5d95957a4267c253d0c6ea5182d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 30 Apr 2013 17:27:46 +0200
+Subject: [PATCH 56/79] MIPS: ralink DTS file updates
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig                      |    8 +
+ arch/mips/ralink/dts/Makefile                 |    2 +
+ arch/mips/ralink/dts/mt7620a.dtsi             |  238 ++++++++++++++++++++++++-
+ arch/mips/ralink/dts/mt7620a_eval.dts         |  111 ++++++++++++
+ arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts |   99 ++++++++++
+ arch/mips/ralink/dts/rt2880.dtsi              |   17 ++
+ arch/mips/ralink/dts/rt2880_eval.dts          |    6 +
+ arch/mips/ralink/dts/rt3050.dtsi              |   31 +++-
+ arch/mips/ralink/dts/rt3052_eval.dts          |   19 +-
+ arch/mips/ralink/dts/rt5350.dtsi              |  227 +++++++++++++++++++++++
+ arch/mips/ralink/dts/rt5350_eval.dts          |   69 +++++++
+ 11 files changed, 824 insertions(+), 3 deletions(-)
+ create mode 100644 arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
+ create mode 100644 arch/mips/ralink/dts/rt5350.dtsi
+ create mode 100644 arch/mips/ralink/dts/rt5350_eval.dts
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 026e823..38540a4 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -42,6 +42,10 @@ choice
+ 		bool "RT305x eval kit"
+ 		depends on SOC_RT305X
+ 
++	config DTB_RT5350_EVAL
++		bool "RT5350 eval kit"
++		depends on SOC_RT305X
++
+ 	config DTB_RT3883_EVAL
+ 		bool "RT3883 eval kit"
+ 		depends on SOC_RT3883
+@@ -50,6 +54,10 @@ choice
+ 		bool "MT7620A eval kit"
+ 		depends on SOC_MT7620
+ 
++	config DTB_MT7620A_MT7610E_EVAL
++		bool "MT7620A + MT7610E eval kit"
++		depends on SOC_MT7620
++
+ endchoice
+ 
+ endif
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+index 18194fa..0bd12b5 100644
+--- a/arch/mips/ralink/dts/Makefile
++++ b/arch/mips/ralink/dts/Makefile
+@@ -1,4 +1,6 @@
+ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
+ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
++obj-$(CONFIG_DTB_RT5350_EVAL) := rt5350_eval.dtb.o
+ obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
+ obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
++obj-$(CONFIG_DTB_MT7620A_MT7610E_EVAL) := mt7620a_mt7610e_eval.dtb.o
+diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi
+index 08bf24f..104abfb 100644
+--- a/arch/mips/ralink/dts/mt7620a.dtsi
++++ b/arch/mips/ralink/dts/mt7620a.dtsi
+@@ -25,14 +25,36 @@
+ 		#size-cells = <1>;
+ 
+ 		sysc@0 {
+-			compatible = "ralink,mt7620a-sysc";
++			compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
+ 			reg = <0x0 0x100>;
+ 		};
+ 
++		timer@100 {
++			compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
++			reg = <0x100 0x20>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <1>;
++		};
++
++		watchdog@120 {
++			compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
++			reg = <0x120 0x10>;
++
++			resets = <&rstctrl 8>;
++			reset-names = "wdt";
++
++			interrupt-parent = <&intc>;
++			interrupts = <1>;
++		};
++
+ 		intc: intc@200 {
+ 			compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
+ 			reg = <0x200 0x100>;
+ 
++			resets = <&rstctrl 19>;
++			reset-names = "intc";
++
+ 			interrupt-controller;
+ 			#interrupt-cells = <1>;
+ 
+@@ -43,16 +65,230 @@
+ 		memc@300 {
+ 			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+ 			reg = <0x300 0x100>;
++
++			resets = <&rstctrl 20>;
++			reset-names = "mc";
++
++			interrupt-parent = <&intc>;
++			interrupts = <3>;
++		};
++
++		uart@500 {
++			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
++			reg = <0x500 0x100>;
++
++			resets = <&rstctrl 12>;
++			reset-names = "uart";
++
++			interrupt-parent = <&intc>;
++			interrupts = <5>;
++
++			reg-shift = <2>;
++
++			status = "disabled";
++		};
++
++		gpio0: gpio@600 {
++			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
++			reg = <0x600 0x34>;
++
++			resets = <&rstctrl 13>;
++			reset-names = "pio";
++
++			interrupt-parent = <&intc>;
++			interrupts = <6>;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			ralink,gpio-base = <0>;
++			ralink,num-gpios = <24>;
++			ralink,register-map = [ 00 04 08 0c
++						20 24 28 2c
++						30 34 ];
++
++			status = "disabled";
++		};
++
++		gpio1: gpio@638 {
++			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
++			reg = <0x638 0x24>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <6>;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			ralink,gpio-base = <24>;
++			ralink,num-gpios = <16>;
++			ralink,register-map = [ 00 04 08 0c
++						10 14 18 1c
++						20 24 ];
++
++			status = "disabled";
++		};
++
++		gpio2: gpio@660 {
++			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
++			reg = <0x660 0x24>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <6>;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			ralink,gpio-base = <40>;
++			ralink,num-gpios = <32>;
++			ralink,register-map = [ 00 04 08 0c
++						10 14 18 1c
++						20 24 ];
++
++			status = "disabled";
++		};
++
++		i2c@900 {
++			compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
++			reg = <0x900 0x100>;
++
++			resets = <&rstctrl 16>;
++			reset-names = "i2c";
++
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "disabled";
++		};
++
++		spi@b00 {
++			compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
++			reg = <0xb00 0x100>;
++
++			resets = <&rstctrl 18>;
++			reset-names = "spi";
++
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			status = "disabled";
+ 		};
+ 
+ 		uartlite@c00 {
+ 			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ 			reg = <0xc00 0x100>;
+ 
++			resets = <&rstctrl 19>;
++			reset-names = "uartl";
++
+ 			interrupt-parent = <&intc>;
+ 			interrupts = <12>;
+ 
+ 			reg-shift = <2>;
+ 		};
++
++		systick@d00 {
++			compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
++			reg = <0xd00 0x10>;
++
++			resets = <&rstctrl 28>;
++			reset-names = "intc";
++
++			interrupt-parent = <&cpuintc>;
++			interrupts = <7>;
++		};
++
++		gdma@2800 {
++			compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
++			reg = <0x2800 0x800>;
++
++			resets = <&rstctrl 14>;
++			reset-names = "dma";
++
++			interrupt-parent = <&intc>;
++			interrupts = <7>;
++		};
++	};
++
++	rstctrl: rstctrl {
++		compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
++		#reset-cells = <1>;
++	};
++
++	ubsphy {
++		compatible = "ralink,mt7620a-usbphy";
++
++		resets = <&rstctrl 22 &rstctrl 25>;
++		reset-names = "host", "device";
++	};
++
++	ethernet@10100000 {
++		compatible = "ralink,mt7620a-eth";
++		reg = <0x10100000 10000>;
++
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		interrupt-parent = <&cpuintc>;
++		interrupts = <5>;
++
++		status = "disabled";
++	
++		mdio-bus {
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "disabled";
++		};
++	};
++
++	gsw@10110000 {
++		compatible = "ralink,mt7620a-gsw";
++		reg = <0x10110000 8000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <17>;
++
++		status = "disabled";
++	};
++
++	sdhci@10130000 {
++		compatible = "ralink,mt7620a-sdhci";
++		reg = <0x10130000 4000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <14>;
++
++		status = "disabled";
++	};
++
++	ehci@101c0000 {
++		compatible = "ralink,rt3xxx-ehci";
++		reg = <0x101c0000 0x1000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <18>;
++	};
++
++	ohci@101c1000 {
++		compatible = "ralink,rt3xxx-ohci";
++		reg = <0x101c1000 0x1000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <18>;
++	};
++
++	pcie@10140000 {
++		compatible = "ralink,mt7620a-pci";
++		reg = <0x10140000 0x100
++			0x10142000 0x100>;
++
++		resets = <&rstctrl 26>;
++		reset-names = "pcie0";
++
++		interrupt-parent = <&cpuintc>;
++		interrupts = <4>;
++
++		status = "disabled";
+ 	};
+ };
+diff --git a/arch/mips/ralink/dts/mt7620a_eval.dts b/arch/mips/ralink/dts/mt7620a_eval.dts
+index 35eb874..b56f449 100644
+--- a/arch/mips/ralink/dts/mt7620a_eval.dts
++++ b/arch/mips/ralink/dts/mt7620a_eval.dts
+@@ -13,4 +13,115 @@
+ 	chosen {
+ 		bootargs = "console=ttyS0,57600";
+ 	};
++
++	palmbus@10000000 {
++		sysc@0 {
++			ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
++			ralink,gpiomux = "i2c", "jtag";
++			ralink,uartmux = "gpio";
++			ralink,wdtmux = <1>;
++		};
++
++		gpio0: gpio@600 {
++			status = "okay";
++		};
++
++		spi@b00 {
++			status = "okay";
++		
++			m25p80@0 {
++				#address-cells = <1>;
++				#size-cells = <1>;
++				compatible = "en25q64";
++				reg = <0 0>;
++				linux,modalias = "m25p80", "en25q64";
++				spi-max-frequency = <10000000>;
++
++				partition@0 {
++					label = "u-boot";
++					reg = <0x0 0x30000>;
++					read-only;
++				};
++
++				partition@30000 {
++					label = "u-boot-env";
++					reg = <0x30000 0x10000>;
++					read-only;
++				};
++
++				factory: partition@40000 {
++					label = "factory";
++					reg = <0x40000 0x10000>;
++					read-only;
++				};
++
++				partition@50000 {
++					label = "firmware";
++					reg = <0x50000 0x7b0000>;
++				};
++			};
++		};
++	};
++
++	ethernet@10100000 {
++		status = "okay";
++		
++		port@4 {
++			compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
++			reg = <4>;
++			phy-mode = "rgmii";
++			phy-handle = <&phy4>;
++		};
++
++		port@5 {
++			compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
++			reg = <5>;
++			phy-mode = "rgmii";
++			phy-handle = <&phy5>;
++		};
++
++		mdio-bus {
++			status = "okay";
++
++			phy4: ethernet-phy@4 {
++				reg = <4>;
++				phy-mode = "rgmii";
++			};
++
++			phy5: ethernet-phy@5 {
++				reg = <5>;
++				phy-mode = "rgmii";
++			};
++		};
++	};
++
++	gsw@10110000 {
++		status = "okay";
++		ralink,port4 = "gmac";
++	};
++
++	sdhci@10130000 {
++		status = "okay";
++	};
++
++	pcie@10140000 {
++		status = "okay";
++	};
++
++	gpio-keys-polled {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		poll-interval = <20>;
++		s2 {
++			label = "S2";
++			gpios = <&gpio0 1 1>;
++			linux,code = <0x100>;
++		};
++		s3 {
++			label = "S3";
++			gpios = <&gpio0 2 1>;
++			linux,code = <0x101>;
++		};
++	};
+ };
+diff --git a/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts b/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
+new file mode 100644
+index 0000000..0d7755b
+--- /dev/null
++++ b/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
+@@ -0,0 +1,99 @@
++/dts-v1/;
++
++/include/ "mt7620a.dtsi"
++
++/ {
++	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
++	model = "Ralink MT7620A evaluation board";
++
++	memory@0 {
++		reg = <0x0 0x2000000>;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,57600";
++	};
++
++	palmbus@10000000 {
++		sysc@0 {
++			ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
++			ralink,gpiomux = "i2c", "jtag";
++			ralink,uartmux = "gpio";
++			ralink,wdtmux = <1>;
++		};
++
++		gpio0: gpio@600 {
++			status = "okay";
++		};
++
++		spi@b00 {
++			status = "okay";
++		
++			m25p80@0 {
++				#address-cells = <1>;
++				#size-cells = <1>;
++				compatible = "en25q64";
++				reg = <0 0>;
++				linux,modalias = "m25p80", "en25q64";
++				spi-max-frequency = <10000000>;
++
++				partition@0 {
++					label = "u-boot";
++					reg = <0x0 0x30000>;
++					read-only;
++				};
++
++				partition@30000 {
++					label = "u-boot-env";
++					reg = <0x30000 0x10000>;
++					read-only;
++				};
++
++				factory: partition@40000 {
++					label = "factory";
++					reg = <0x40000 0x10000>;
++					read-only;
++				};
++
++				partition@50000 {
++					label = "firmware";
++					reg = <0x50000 0x7b0000>;
++				};
++			};
++		};
++	};
++
++	ethernet@10100000 {
++		status = "okay";
++	};
++
++	gsw@10110000 {
++		status = "okay";
++		ralink,port4 = "ephy";
++	};
++
++	sdhci@10130000 {
++		status = "okay";
++	};
++
++	pcie@10140000 {
++		status = "okay";
++	};
++
++	gpio-keys-polled {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		poll-interval = <20>;
++		wps {
++			label = "wps";
++			gpios = <&gpio0 12 1>;
++			linux,code = <0x100>;
++		};
++		reset {
++			label = "reset";
++			gpios = <&gpio0 13 1>;
++			linux,code = <0x101>;
++		};
++	};
++};
+diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
+index 182afde..2a34b8d 100644
+--- a/arch/mips/ralink/dts/rt2880.dtsi
++++ b/arch/mips/ralink/dts/rt2880.dtsi
+@@ -55,4 +55,21 @@
+ 			reg-shift = <2>;
+ 		};
+ 	};
++
++	ethernet@400000 {
++		compatible = "ralink,rt2880-eth";
++		reg = <0x00400000 10000>;
++
++		interrupt-parent = <&cpuintc>;
++		interrupts = <5>;
++
++		status = "disabled";
++
++		mdio-bus {
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "disabled";
++		};
++	};
+ };
+diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
+index 322d700..58a1edf 100644
+--- a/arch/mips/ralink/dts/rt2880_eval.dts
++++ b/arch/mips/ralink/dts/rt2880_eval.dts
+@@ -43,4 +43,10 @@
+ 			reg = <0x50000 0x3b0000>;
+ 		};
+ 	};
++
++	ethernet@400000 {
++		status = "okay";
++
++		ralink,fixed-link = <1000 1 1 1>;
++	};
+ };
+diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
+index ef7da1e..b1ac940 100644
+--- a/arch/mips/ralink/dts/rt3050.dtsi
++++ b/arch/mips/ralink/dts/rt3050.dtsi
+@@ -1,7 +1,7 @@
+ / {
+ 	#address-cells = <1>;
+ 	#size-cells = <1>;
+-	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
++	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
+ 
+ 	cpus {
+ 		cpu@0 {
+@@ -45,6 +45,15 @@
+ 			reg = <0x300 0x100>;
+ 		};
+ 
++		i2c@900 {
++			compatible = "link,rt3052-i2c", "ralink,rt2880-i2c";
++			reg = <0x900 0x100>;
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "disabled";
++		};
++
+ 		uartlite@c00 {
+ 			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+ 			reg = <0xc00 0x100>;
+@@ -55,4 +64,24 @@
+ 			reg-shift = <2>;
+ 		};
+ 	};
++
++	ethernet@10100000 {
++		compatible = "ralink,rt3050-eth";
++		reg = <0x10100000 10000>;
++
++		interrupt-parent = <&cpuintc>;
++		interrupts = <5>;
++
++		status = "disabled";
++	};
++
++	esw@10110000 {
++		compatible = "ralink,rt3050-esw";
++		reg = <0x10110000 8000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <17>;
++
++		status = "disabled";
++	};
+ };
+diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
+index df17f5f..df02957 100644
+--- a/arch/mips/ralink/dts/rt3052_eval.dts
++++ b/arch/mips/ralink/dts/rt3052_eval.dts
+@@ -3,7 +3,7 @@
+ /include/ "rt3050.dtsi"
+ 
+ / {
+-	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
++	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc", "ralink,rt5350-soc";
+ 	model = "Ralink RT3052 evaluation board";
+ 
+ 	memory@0 {
+@@ -14,6 +14,14 @@
+ 		bootargs = "console=ttyS0,57600";
+ 	};
+ 
++	palmbus@10000000 {
++		sysc@0 {
++			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
++			ralink,uartmux = "gpio";
++			ralink,wdtmux = <1>;
++		};
++	};
++
+ 	cfi@1f000000 {
+ 		compatible = "cfi-flash";
+ 		reg = <0x1f000000 0x800000>;
+@@ -43,4 +51,13 @@
+ 			reg = <0x50000 0x7b0000>;
+ 		};
+ 	};
++
++	ethernet@10100000 {
++		status = "okay";
++	};
++
++	esw@10110000 {
++		status = "okay";
++		ralink,portmap = <0x2f>;
++	};
+ };
+diff --git a/arch/mips/ralink/dts/rt5350.dtsi b/arch/mips/ralink/dts/rt5350.dtsi
+new file mode 100644
+index 0000000..3d6b3bc
+--- /dev/null
++++ b/arch/mips/ralink/dts/rt5350.dtsi
+@@ -0,0 +1,227 @@
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	compatible = "ralink,rt5350-soc";
++
++	cpus {
++		cpu@0 {
++			compatible = "mips,mips24KEc";
++		};
++	};
++
++	cpuintc: cpuintc@0 {
++		#address-cells = <0>;
++		#interrupt-cells = <1>;
++		interrupt-controller;
++		compatible = "mti,cpu-interrupt-controller";
++	};
++
++	palmbus@10000000 {
++		compatible = "palmbus";
++		reg = <0x10000000 0x200000>;
++		ranges = <0x0 0x10000000 0x1FFFFF>;
++
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		sysc@0 {
++			compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
++			reg = <0x0 0x100>;
++		};
++
++		timer@100 {
++			compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
++			reg = <0x100 0x20>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <1>;
++		};
++
++		watchdog@120 {
++			compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
++			reg = <0x120 0x10>;
++
++			resets = <&rstctrl 8>;
++			reset-names = "wdt";
++
++			interrupt-parent = <&intc>;
++			interrupts = <1>;
++		};
++
++		intc: intc@200 {
++			compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
++			reg = <0x200 0x100>;
++
++			resets = <&rstctrl 19>;
++			reset-names = "intc";
++
++			interrupt-controller;
++			#interrupt-cells = <1>;
++
++			interrupt-parent = <&cpuintc>;
++			interrupts = <2>;
++		};
++
++		memc@300 {
++			compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
++			reg = <0x300 0x100>;
++
++			resets = <&rstctrl 20>;
++			reset-names = "mc";
++
++			interrupt-parent = <&intc>;
++			interrupts = <3>;
++		};
++
++		uart@500 {
++			compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
++			reg = <0x500 0x100>;
++
++			resets = <&rstctrl 12>;
++			reset-names = "uart";
++
++			interrupt-parent = <&intc>;
++			interrupts = <5>;
++
++			reg-shift = <2>;
++
++			status = "disabled";
++		};
++
++		gpio0: gpio@600 {
++			compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
++			reg = <0x600 0x34>;
++
++			resets = <&rstctrl 13>;
++			reset-names = "pio";
++
++			interrupt-parent = <&intc>;
++			interrupts = <6>;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			ralink,gpio-base = <0>;
++			ralink,num-gpios = <24>;
++			ralink,register-map = [ 00 04 08 0c
++						20 24 28 2c
++						30 34 ];
++
++			status = "disabled";
++		};
++
++		gpio1: gpio@638 {
++			compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
++			reg = <0x638 0x24>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <6>;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			ralink,gpio-base = <24>;
++			ralink,num-gpios = <16>;
++			ralink,register-map = [ 00 04 08 0c
++						10 14 18 1c
++						20 24 ];
++
++			status = "disabled";
++		};
++
++		i2c@900 {
++			compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
++			reg = <0x900 0x100>;
++
++			resets = <&rstctrl 16>;
++			reset-names = "i2c";
++
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "disabled";
++		};
++
++		spi@b00 {
++			compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
++			reg = <0xb00 0x100>;
++
++			resets = <&rstctrl 18>;
++			reset-names = "spi";
++
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			status = "disabled";
++		};
++
++		uartlite@c00 {
++			compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
++			reg = <0xc00 0x100>;
++
++			resets = <&rstctrl 19>;
++			reset-names = "uartl";
++
++			interrupt-parent = <&intc>;
++			interrupts = <12>;
++
++			reg-shift = <2>;
++		};
++
++		systick@d00 {
++			compatible = "ralink,rt5350-systick", "ralink,cevt-systick";
++			reg = <0xd00 0x10>;
++
++			interrupt-parent = <&cpuintc>;
++			interrupts = <7>;
++		};
++	};
++
++	rstctrl: rstctrl {
++		compatible = "ralink,rt5350-reset", "ralink,rt2880-reset";
++		#reset-cells = <1>;
++	};
++
++	ubsphy {
++		compatible = "ralink,rt3xxx-usbphy";
++
++		resets = <&rstctrl 22 &rstctrl 25>;
++		reset-names = "host", "device";
++	};
++
++	ethernet@10100000 {
++		compatible = "ralink,rt5350-eth";
++		reg = <0x10100000 10000>;
++
++		interrupt-parent = <&cpuintc>;
++		interrupts = <5>;
++
++		status = "disabled";
++	};
++
++	esw@10110000 {
++		compatible = "ralink,rt3050-esw";
++		reg = <0x10110000 8000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <17>;
++
++		status = "disabled";
++	};
++
++	ehci@101c0000 {
++		compatible = "ralink,rt3xxx-ehci";
++		reg = <0x101c0000 0x1000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <18>;
++	};
++
++	ohci@101c1000 {
++		compatible = "ralink,rt3xxx-ohci";
++		reg = <0x101c1000 0x1000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <18>;
++	};
++};
+diff --git a/arch/mips/ralink/dts/rt5350_eval.dts b/arch/mips/ralink/dts/rt5350_eval.dts
+new file mode 100644
+index 0000000..ab92043
+--- /dev/null
++++ b/arch/mips/ralink/dts/rt5350_eval.dts
+@@ -0,0 +1,69 @@
++/dts-v1/;
++
++/include/ "rt5350.dtsi"
++
++/ {
++	compatible = "ralink,rt5350-eval-board", "ralink,rt5350-soc";
++	model = "Ralink RT5350 evaluation board";
++
++	chosen {
++		bootargs = "console=ttyS0,57600";
++	};
++
++	palmbus@10000000 {
++		sysc@0 {
++			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
++			ralink,uartmux = "gpio";
++			ralink,wdtmux = <1>;
++		};
++
++		gpio0: gpio@600 {
++			status = "okay";
++		};
++
++		spi@b00 {
++			status = "okay";
++		
++			m25p80@0 {
++				#address-cells = <1>;
++				#size-cells = <1>;
++				compatible = "en25q64";
++				reg = <0 0>;
++				linux,modalias = "m25p80", "mx25l3205d";
++				spi-max-frequency = <10000000>;
++
++				partition@0 {
++					label = "u-boot";
++					reg = <0x0 0x30000>;
++					read-only;
++				};
++
++				partition@30000 {
++					label = "u-boot-env";
++					reg = <0x30000 0x10000>;
++					read-only;
++				};
++
++				factory: partition@40000 {
++					label = "factory";
++					reg = <0x40000 0x10000>;
++					read-only;
++				};
++
++				partition@50000 {
++					label = "firmware";
++					reg = <0x50000 0x3b0000>;
++				};
++			};
++		};
++	};
++
++	ethernet@10100000 {
++		status = "okay";
++	};
++
++	esw@10110000 {
++		status = "okay";
++		ralink,portmap = <0x2f>;
++	};
++};
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0130-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch b/target/linux/ramips/patches-3.8/0057-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch
index cdff4312dd..3149ac2731 100644
--- a/target/linux/ramips/patches-3.8/0130-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch
+++ b/target/linux/ramips/patches-3.8/0057-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch
@@ -1,7 +1,7 @@
-From 007ab7fe49bfcaa220372260eedeb4eed51f1631 Mon Sep 17 00:00:00 2001
+From de5e1cd11d62d2e1a00210b757dad35e1372963b Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Tue, 22 Jan 2013 18:24:34 +0100
-Subject: [PATCH 130/137] GPIO: MIPS: ralink: adds ralink gpio support
+Subject: [PATCH 57/79] GPIO: MIPS: ralink: adds ralink gpio support
 
 Add gpio driver for Ralink SoC. This driver makes the gpio core on
 RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
@@ -9,14 +9,16 @@ RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
 Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
  arch/mips/Kconfig                        |    1 +
- arch/mips/include/asm/mach-ralink/gpio.h |   24 ++++
+ arch/mips/include/asm/mach-ralink/gpio.h |   24 +++
  drivers/gpio/Kconfig                     |    6 +
  drivers/gpio/Makefile                    |    1 +
- drivers/gpio/gpio-ralink.c               |  176 ++++++++++++++++++++++++++++++
- 5 files changed, 208 insertions(+)
+ drivers/gpio/gpio-ralink.c               |  326 ++++++++++++++++++++++++++++++
+ 5 files changed, 358 insertions(+)
  create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
  create mode 100644 drivers/gpio/gpio-ralink.c
 
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index b5fd476..2498972 100644
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
 @@ -449,6 +449,7 @@ config RALINK
@@ -27,6 +29,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  config SGI_IP22
  	bool "SGI IP22 (Indy/Indigo2)"
+diff --git a/arch/mips/include/asm/mach-ralink/gpio.h b/arch/mips/include/asm/mach-ralink/gpio.h
+new file mode 100644
+index 0000000..f68ee16
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/gpio.h
 @@ -0,0 +1,24 @@
@@ -54,6 +59,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#define gpio_to_irq	__gpio_to_irq
 +
 +#endif /* __ASM_MACH_RALINK_GPIO_H */
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index 682de75..2e6e81c 100644
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
 @@ -201,6 +201,12 @@ config GPIO_PXA
@@ -69,9 +76,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  config GPIO_SPEAR_SPICS
  	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
  	depends on PLAT_SPEAR
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index c5aebd0..a00adfc 100644
 --- a/drivers/gpio/Makefile
 +++ b/drivers/gpio/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf85
+@@ -54,6 +54,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
  obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
  obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
  obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
@@ -79,9 +88,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_GPIO_RC5T583)	+= gpio-rc5t583.o
  obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
  obj-$(CONFIG_PLAT_SAMSUNG)	+= gpio-samsung.o
+diff --git a/drivers/gpio/gpio-ralink.c b/drivers/gpio/gpio-ralink.c
+new file mode 100644
+index 0000000..12984f1
 --- /dev/null
 +++ b/drivers/gpio/gpio-ralink.c
-@@ -0,0 +1,182 @@
+@@ -0,0 +1,326 @@
 +/*
 + * This program is free software; you can redistribute it and/or modify it
 + * under the terms of the GNU General Public License version 2 as published
@@ -96,6 +108,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#include <linux/gpio.h>
 +#include <linux/spinlock.h>
 +#include <linux/platform_device.h>
++#include <linux/of_irq.h>
++#include <linux/irqdomain.h>
++#include <linux/interrupt.h>
 +
 +enum ralink_gpio_reg {
 +	GPIO_REG_INT = 0,
@@ -117,13 +132,24 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +	spinlock_t lock;
 +	void __iomem *membase;
++	struct irq_domain *domain;
++	int irq;
++
++	u32 rising;
++	u32 falling;
 +};
 +
++#define MAP_MAX	4
++static struct irq_domain *irq_map[MAP_MAX];
++static int irq_map_count;
++static atomic_t irq_refcount = ATOMIC_INIT(0);
++
 +static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
 +{
 +	struct ralink_gpio_chip *rg;
 +
 +	rg = container_of(chip, struct ralink_gpio_chip, chip);
++
 +	return rg;
 +}
 +
@@ -183,32 +209,158 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	return 0;
 +}
 +
++static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
++{
++	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++	if (rg->irq < 1)
++		return -1;
++
++	ralink_gpio_direction_input(chip, pin);
++
++	return irq_create_mapping(rg->domain, pin);
++}
++
++static void ralink_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++	int i;
++
++	for (i = 0; i < irq_map_count; i++) {
++		struct irq_domain *domain = irq_map[i];
++		struct ralink_gpio_chip *rg = (struct ralink_gpio_chip *) domain->host_data;
++		unsigned long pending = rt_gpio_r32(rg, GPIO_REG_INT);
++		int bit;
++
++		for_each_set_bit(bit, &pending, rg->chip.ngpio) {
++			u32 map = irq_find_mapping(domain, bit);
++			generic_handle_irq(map);
++			rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
++		}
++	}
++}
++
++static void ralink_gpio_irq_unmask(struct irq_data *d)
++{
++	struct ralink_gpio_chip *rg = (struct ralink_gpio_chip *) d->domain->host_data;
++	u32 val = rt_gpio_r32(rg, GPIO_REG_RENA);
++	unsigned long flags;
++
++	spin_lock_irqsave(&rg->lock, flags);
++	rt_gpio_w32(rg, GPIO_REG_RENA, val | (BIT(d->hwirq) & rg->rising));
++	rt_gpio_w32(rg, GPIO_REG_FENA, val | (BIT(d->hwirq) & rg->falling));
++	spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static void ralink_gpio_irq_mask(struct irq_data *d)
++{
++	struct ralink_gpio_chip *rg = (struct ralink_gpio_chip *) d->domain->host_data;
++	u32 val = rt_gpio_r32(rg, GPIO_REG_RENA);
++	unsigned long flags;
++
++	spin_lock_irqsave(&rg->lock, flags);
++	rt_gpio_w32(rg, GPIO_REG_FENA, val & ~BIT(d->hwirq));
++	rt_gpio_w32(rg, GPIO_REG_RENA, val & ~BIT(d->hwirq));
++	spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
++{
++	struct ralink_gpio_chip *rg = (struct ralink_gpio_chip *) d->domain->host_data;
++	u32 mask = BIT(d->hwirq);
++
++	if (type == IRQ_TYPE_PROBE) {
++		if ((rg->rising | rg->falling) & mask)
++			return 0;
++
++		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_RISING;
++	}
++
++	if (type & IRQ_TYPE_EDGE_RISING)
++		rg->rising |= mask;
++	else
++		rg->rising &= mask;
++
++	if (type & IRQ_TYPE_EDGE_RISING)
++		rg->falling |= mask;
++	else
++		rg->falling &= mask;
++
++	return 0;
++}
++
++static struct irq_chip ralink_gpio_irq_chip = {
++	.name		= "GPIO",
++	.irq_unmask	= ralink_gpio_irq_unmask,
++	.irq_mask	= ralink_gpio_irq_mask,
++	.irq_mask_ack	= ralink_gpio_irq_mask,
++	.irq_set_type	= ralink_gpio_irq_type,
++};
++
++static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
++{
++	irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
++	irq_set_handler_data(irq, d);
++
++	return 0;
++}
++
++static const struct irq_domain_ops irq_domain_ops = {
++	.xlate = irq_domain_xlate_onecell,
++	.map = gpio_map,
++};
++
++static void ralink_gpio_irq_init(struct device_node *np, struct ralink_gpio_chip *rg)
++{
++	if (irq_map_count >= MAP_MAX)
++		return;
++
++	rg->irq = irq_of_parse_and_map(np, 0);
++	if (!rg->irq)
++		return;
++
++	rg->domain = irq_domain_add_linear(np, rg->chip.ngpio, &irq_domain_ops, rg);
++	if (!rg->domain) {
++		dev_err(rg->chip.dev, "irq_domain_add_linear failed\n");
++		return;
++	}
++
++	irq_map[irq_map_count++] = rg->domain;
++
++	rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
++	rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
++
++	if (!atomic_read(&irq_refcount))
++		irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
++	atomic_inc(&irq_refcount);
++
++	dev_info(rg->chip.dev, "registering %d irq handlers\n", rg->chip.ngpio);
++}
++
 +static int ralink_gpio_probe(struct platform_device *pdev)
 +{
 +	struct device_node *np = pdev->dev.of_node;
 +	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	struct ralink_gpio_chip *gc;
-+	const __be32 *ngpio;
-+	const __be32 *gpiobase;
++	struct ralink_gpio_chip *rg;
++	const __be32 *ngpio, *gpiobase;
 +
 +	if (!res) {
 +		dev_err(&pdev->dev, "failed to find resource\n");
 +		return -ENOMEM;
 +	}
 +
-+	gc = devm_kzalloc(&pdev->dev,
-+				sizeof(struct ralink_gpio_chip), GFP_KERNEL);
-+	if (!gc)
++	rg = devm_kzalloc(&pdev->dev,
++			sizeof(struct ralink_gpio_chip), GFP_KERNEL);
++	if (!rg)
 +		return -ENOMEM;
 +
-+	gc->membase = devm_request_and_ioremap(&pdev->dev, res);
-+	if (!gc->membase) {
++	rg->membase = devm_request_and_ioremap(&pdev->dev, res);
++	if (!rg->membase) {
 +		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
 +		return -ENOMEM;
 +	}
 +
 +	if (of_property_read_u8_array(np, "ralink,register-map",
-+			gc->regs, GPIO_REG_MAX)) {
++			rg->regs, GPIO_REG_MAX)) {
 +		dev_err(&pdev->dev, "failed to read register definition\n");
 +		return -EINVAL;
 +	}
@@ -221,26 +373,30 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +	gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
 +	if (gpiobase)
-+		gc->chip.base = be32_to_cpu(*gpiobase);
++		rg->chip.base = be32_to_cpu(*gpiobase);
 +	else
-+		gc->chip.base = -1;
++		rg->chip.base = -1;
 +
-+	gc->chip.label = dev_name(&pdev->dev);
-+	gc->chip.of_node = np;
-+	gc->chip.ngpio = be32_to_cpu(*ngpio);
-+	gc->chip.direction_input = ralink_gpio_direction_input;
-+	gc->chip.direction_output = ralink_gpio_direction_output;
-+	gc->chip.get = ralink_gpio_get;
-+	gc->chip.set = ralink_gpio_set;
++	spin_lock_init(&rg->lock);
 +
-+	spin_lock_init(&gc->lock);
++	rg->chip.dev = &pdev->dev;
++	rg->chip.label = dev_name(&pdev->dev);
++	rg->chip.of_node = np;
++	rg->chip.ngpio = be32_to_cpu(*ngpio);
++	rg->chip.direction_input = ralink_gpio_direction_input;
++	rg->chip.direction_output = ralink_gpio_direction_output;
++	rg->chip.get = ralink_gpio_get;
++	rg->chip.set = ralink_gpio_set;
++	rg->chip.to_irq = ralink_gpio_to_irq;
 +
 +	/* set polarity to low for all lines */
-+	rt_gpio_w32(gc, GPIO_REG_POL, 0);
++	rt_gpio_w32(rg, GPIO_REG_POL, 0);
++
++	dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
 +
-+	dev_info(&pdev->dev, "registering %d gpios\n", gc->chip.ngpio);
++	ralink_gpio_irq_init(np, rg);
 +
-+	return gpiochip_add(&gc->chip);
++	return gpiochip_add(&rg->chip);
 +}
 +
 +static const struct of_device_id ralink_gpio_match[] = {
@@ -264,3 +420,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +}
 +
 +subsys_initcall(ralink_gpio_init);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0131-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-3.8/0058-SPI-ralink-add-Ralink-SoC-spi-driver.patch
index 8217b48318..f1706f5742 100644
--- a/target/linux/ramips/patches-3.8/0131-SPI-ralink-add-Ralink-SoC-spi-driver.patch
+++ b/target/linux/ramips/patches-3.8/0058-SPI-ralink-add-Ralink-SoC-spi-driver.patch
@@ -1,7 +1,7 @@
-From 32c1cff4c75925a0bbd305e85ed4adb30140cd42 Mon Sep 17 00:00:00 2001
+From cfb23fbd5be0276507a8af15be0738a7834555b5 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Mon, 22 Apr 2013 23:16:18 +0200
-Subject: [PATCH 131/137] SPI: ralink: add Ralink SoC spi driver
+Subject: [PATCH 58/79] SPI: ralink: add Ralink SoC spi driver
 
 Add the driver needed to make SPI work on Ralink SoC.
 
@@ -9,28 +9,32 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
  drivers/spi/Kconfig      |    6 +
  drivers/spi/Makefile     |    1 +
- drivers/spi/spi-ralink.c |  472 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 479 insertions(+)
+ drivers/spi/spi-ralink.c |  475 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 482 insertions(+)
  create mode 100644 drivers/spi/spi-ralink.c
 
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 2e188e1..76c489a 100644
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -324,6 +324,12 @@ config SPI_RSPI
+@@ -315,6 +315,12 @@ config SPI_RSPI
  	help
  	  SPI driver for Renesas RSPI blocks.
  
 +config SPI_RALINK
 +	tristate "Ralink RT288x/RT305x/RT3662 SPI Controller"
-+	depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
++	depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620)
 +	help
 +	  This selects a driver for the Ralink RT288x/RT305x SPI Controller.
 +
  config SPI_S3C24XX
  	tristate "Samsung S3C24XX series SPI"
  	depends on ARCH_S3C24XX && EXPERIMENTAL
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 64e970b..5b73cf8 100644
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -51,6 +51,7 @@ obj-$(CONFIG_SPI_PPC4xx)		+= spi-ppc4xx.
+@@ -50,6 +50,7 @@ obj-$(CONFIG_SPI_PPC4xx)		+= spi-ppc4xx.o
  obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx.o
  obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
  obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
@@ -38,9 +42,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
  spi-s3c24xx-hw-y			:= spi-s3c24xx.o
  spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
+diff --git a/drivers/spi/spi-ralink.c b/drivers/spi/spi-ralink.c
+new file mode 100644
+index 0000000..b07cbaa
 --- /dev/null
 +++ b/drivers/spi/spi-ralink.c
-@@ -0,0 +1,472 @@
+@@ -0,0 +1,475 @@
 +/*
 + * spi-ralink.c -- Ralink RT288x/RT305x SPI controller driver
 + *
@@ -61,9 +68,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#include <linux/clk.h>
 +#include <linux/err.h>
 +#include <linux/delay.h>
-+#include <linux/platform_device.h>
 +#include <linux/io.h>
++#include <linux/reset.h>
 +#include <linux/spi/spi.h>
++#include <linux/platform_device.h>
 +
 +#define DRIVER_NAME			"spi-ralink"
 +#define RALINK_NUM_CHIPSELECTS		1 /* only one slave is supported*/
@@ -457,6 +465,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +		goto out_disable_clk;
 +	}
 +
++	device_reset(&pdev->dev);
++
 +	ralink_spi_reset(rs);
 +
 +	status = spi_register_master(master);
@@ -513,3 +523,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
 +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
 +MODULE_LICENSE("GPL");
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0059-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch b/target/linux/ramips/patches-3.8/0059-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
new file mode 100644
index 0000000000..16a82cae4e
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0059-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
@@ -0,0 +1,32 @@
+From 15a3839fa080feec3b4ce6d92b08893bf1eefe56 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 22 Jan 2013 16:01:07 +0100
+Subject: [PATCH 59/79] serial: of: allow au1x00 and rt288x to load from OF
+
+In order to make serial_8250 loadable via OF on Au1x00 and Ralink WiSoC we need
+to default the iotype to UPIO_AU.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/tty/serial/of_serial.c |    5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
+index e7cae1c..026e5d6 100644
+--- a/drivers/tty/serial/of_serial.c
++++ b/drivers/tty/serial/of_serial.c
+@@ -97,7 +97,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
+ 		port->regshift = prop;
+ 
+ 	port->irq = irq_of_parse_and_map(np, 0);
+-	port->iotype = UPIO_MEM;
++	if (of_device_is_compatible(np, "ralink,rt2880-uart"))
++		port->iotype = UPIO_AU;
++	else
++		port->iotype = UPIO_MEM;
+ 	if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+ 		switch (prop) {
+ 		case 1:
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0133-serial-ralink-adds-mt7620-serial.patch b/target/linux/ramips/patches-3.8/0060-serial-ralink-adds-mt7620-serial.patch
index 1fce223ddb..c935a5a6a4 100644
--- a/target/linux/ramips/patches-3.8/0133-serial-ralink-adds-mt7620-serial.patch
+++ b/target/linux/ramips/patches-3.8/0060-serial-ralink-adds-mt7620-serial.patch
@@ -1,7 +1,7 @@
-From 6471ee7bbf3f8b70267ba1dc93f067e18803c246 Mon Sep 17 00:00:00 2001
+From d76f99c928f0cd6e6cd3d99c916d890ae9a1e073 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 15 Mar 2013 18:16:01 +0100
-Subject: [PATCH 133/137] serial: ralink: adds mt7620 serial
+Subject: [PATCH 60/79] serial: ralink: adds mt7620 serial
 
 Add the config symbol for Mediatek7620 SoC to SERIAL_8250_RT288X
 
@@ -10,6 +10,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  drivers/tty/serial/8250/Kconfig |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
+diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
+index 9e4febd..d1ec3a1 100644
 --- a/drivers/tty/serial/8250/Kconfig
 +++ b/drivers/tty/serial/8250/Kconfig
 @@ -280,7 +280,7 @@ config SERIAL_8250_EM
@@ -21,3 +23,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	help
  	  If you have a Ralink RT288x/RT305x SoC based board and want to use the
  	  serial port, say Y to this option. The driver can handle up to 2 serial
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0061-DMA-MIPS-ralink-add-dmaengine-driver.patch b/target/linux/ramips/patches-3.8/0061-DMA-MIPS-ralink-add-dmaengine-driver.patch
new file mode 100644
index 0000000000..a2f8f09ac1
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0061-DMA-MIPS-ralink-add-dmaengine-driver.patch
@@ -0,0 +1,341 @@
+From 1db0d19afe5830f7d020c7c5386be8cc20cf0f15 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 23 May 2013 18:45:29 +0200
+Subject: [PATCH 61/79] DMA: MIPS: ralink: add dmaengine driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/dma/Kconfig       |    7 ++
+ drivers/dma/Makefile      |    1 +
+ drivers/dma/ralink_gdma.c |  229 +++++++++++++++++++++++++++++++++++++++++++++
+ drivers/dma/ralink_gdma.h |   55 +++++++++++
+ 4 files changed, 292 insertions(+)
+ create mode 100644 drivers/dma/ralink_gdma.c
+ create mode 100644 drivers/dma/ralink_gdma.h
+
+diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
+index d4c1218..323f684 100644
+--- a/drivers/dma/Kconfig
++++ b/drivers/dma/Kconfig
+@@ -320,6 +320,13 @@ config MMP_PDMA
+ 	help
+ 	  Support the MMP PDMA engine for PXA and MMP platfrom.
+ 
++config RALINK_GDMA
++	bool "Ralink Generic DMA support"
++	depends on RALINK
++	select DMA_ENGINE
++	help
++	  Support the GDMA engine for MIPS based Ralink SoC.
++
+ config DMA_ENGINE
+ 	bool
+ 
+diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
+index 7428fea..a981e2c 100644
+--- a/drivers/dma/Makefile
++++ b/drivers/dma/Makefile
+@@ -34,3 +34,4 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
+ obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
+ obj-$(CONFIG_DMA_OMAP) += omap-dma.o
+ obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
++obj-$(CONFIG_RALINK_GDMA) += ralink_gdma.o
+diff --git a/drivers/dma/ralink_gdma.c b/drivers/dma/ralink_gdma.c
+new file mode 100644
+index 0000000..be7c317
+--- /dev/null
++++ b/drivers/dma/ralink_gdma.c
+@@ -0,0 +1,229 @@
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/of_platform.h>
++#include <linux/memory.h>
++
++#include "ralink_gdma.h"
++
++#define SURFBOARDINT_DMA	10
++#define MEMCPY_DMA_CH	8
++#define to_rt2880_dma_chan(chan)            \
++	container_of(chan, struct rt2880_dma_chan, common)
++
++static dma_cookie_t rt2880_dma_tx_submit(struct dma_async_tx_descriptor *tx)
++{
++	dma_cookie_t cookie;
++
++	cookie = tx->chan->cookie;
++
++	return cookie;
++}
++
++#define MIN_RTDMA_PKT_LEN	128
++static struct dma_async_tx_descriptor *
++rt2880_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
++		size_t len, unsigned long flags)
++{
++	struct rt2880_dma_chan *rt_chan = to_rt2880_dma_chan(chan);
++	unsigned long mid_offset;
++
++	spin_lock_bh(&rt_chan->lock);
++
++	if(len < MIN_RTDMA_PKT_LEN) {
++		memcpy(phys_to_virt(dest), phys_to_virt(src), len);
++	} else {
++		mid_offset = len/2;
++
++		/* Lower parts are transferred  by GDMA.
++		 * Upper parts are transferred by CPU.
++		 */
++		RT_DMA_WRITE_REG(RT_DMA_SRC_REG(MEMCPY_DMA_CH), src);
++		RT_DMA_WRITE_REG(RT_DMA_DST_REG(MEMCPY_DMA_CH), dest);
++		RT_DMA_WRITE_REG(RT_DMA_CTRL_REG(MEMCPY_DMA_CH), (mid_offset << 16) | (3 << 3) | (3 << 0));
++
++		memcpy(phys_to_virt(dest)+mid_offset, phys_to_virt(src)+mid_offset, len-mid_offset);
++
++		dma_async_tx_descriptor_init(&rt_chan->txd, chan);
++
++		while((RT_DMA_READ_REG(RT_DMA_DONEINT) & (0x1<<MEMCPY_DMA_CH))==0);
++		RT_DMA_WRITE_REG(RT_DMA_DONEINT, (1<<MEMCPY_DMA_CH));
++	}
++
++	spin_unlock_bh(&rt_chan->lock);
++
++	return &rt_chan->txd;
++}
++
++/**
++ * rt2880_dma_status - poll the status of an XOR transaction
++ * @chan: XOR channel handle
++ * @cookie: XOR transaction identifier
++ * @txstate: XOR transactions state holder (or NULL)
++ */
++static enum dma_status rt2880_dma_status(struct dma_chan *chan,
++					  dma_cookie_t cookie,
++					  struct dma_tx_state *txstate)
++{
++	return 0;
++}
++
++static irqreturn_t rt2880_dma_interrupt_handler(int irq, void *data)
++{
++
++	printk("%s\n",__FUNCTION__);
++
++	return IRQ_HANDLED;
++}
++
++static void rt2880_dma_issue_pending(struct dma_chan *chan)
++{
++}
++
++static int rt2880_dma_alloc_chan_resources(struct dma_chan *chan)
++{
++//	printk("%s\n",__FUNCTION__);
++
++	return 0;
++}
++
++static void rt2880_dma_free_chan_resources(struct dma_chan *chan)
++{
++//	printk("%s\n",__FUNCTION__);
++
++}
++
++static int rt2880_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
++{
++	switch (cmd) {
++	case DMA_TERMINATE_ALL:
++		printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++		break;
++	case DMA_SLAVE_CONFIG:
++		printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++		break;
++	default:
++		return -ENXIO;
++	}
++
++	return 0;
++}
++
++static int rt2880_dma_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	__iomem void *membase;
++	struct dma_device *dma_dev;
++	struct rt2880_dma_chan *rt_chan;
++	int err;
++	int ret;
++	int reg;
++	int irq;
++
++	membase = devm_request_and_ioremap(&pdev->dev, res);
++	if (IS_ERR(membase))
++		return PTR_ERR(membase);
++
++	dma_dev = devm_kzalloc(&pdev->dev, sizeof(*dma_dev), GFP_KERNEL);
++	if (!dma_dev)
++		return -ENOMEM;
++
++	irq = platform_get_irq(pdev, 0);
++	if (!irq) {
++		dev_err(&pdev->dev, "failed to load irq\n");
++		return -ENOENT;
++	}
++
++
++	INIT_LIST_HEAD(&dma_dev->channels);
++	dma_cap_zero(dma_dev->cap_mask);
++	dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
++	dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
++	dma_dev->device_alloc_chan_resources = rt2880_dma_alloc_chan_resources;
++	dma_dev->device_free_chan_resources = rt2880_dma_free_chan_resources;
++	dma_dev->device_tx_status = rt2880_dma_status;
++	dma_dev->device_issue_pending = rt2880_dma_issue_pending;
++	dma_dev->device_prep_dma_memcpy = rt2880_dma_prep_dma_memcpy;
++	dma_dev->device_control = rt2880_dma_control;
++	dma_dev->dev = &pdev->dev;
++
++	rt_chan = devm_kzalloc(&pdev->dev, sizeof(*rt_chan), GFP_KERNEL);
++        if (!rt_chan) {
++		return -ENOMEM;
++	}
++
++	spin_lock_init(&rt_chan->lock);
++        INIT_LIST_HEAD(&rt_chan->chain);
++	INIT_LIST_HEAD(&rt_chan->completed_slots);
++	INIT_LIST_HEAD(&rt_chan->all_slots);
++	rt_chan->common.device = dma_dev;
++	rt_chan->txd.tx_submit = rt2880_dma_tx_submit;
++
++	list_add_tail(&rt_chan->common.device_node, &dma_dev->channels);
++
++	err = dma_async_device_register(dma_dev);
++	if (0 != err) {
++		pr_err("ERR_MDMA:device_register failed: %d\n", err);
++		return 1;
++	}
++
++	ret = request_irq(irq, rt2880_dma_interrupt_handler, 0, dev_name(&pdev->dev), NULL);
++	if(ret){
++		pr_err("IRQ %d is not free.\n", SURFBOARDINT_DMA);
++		return 1;
++	}
++
++	//set GDMA register in advance.
++	reg = (32 << 16) | (32 << 8) | (MEMCPY_DMA_CH << 3);
++	RT_DMA_WRITE_REG(RT_DMA_CTRL_REG1(MEMCPY_DMA_CH), reg);
++
++	dev_info(&pdev->dev, "running\n");
++
++	return 0;
++}
++
++static int rt2880_dma_remove(struct platform_device *dev)
++{
++	struct dma_device *dma_dev = platform_get_drvdata(dev);
++
++	printk("%s\n",__FUNCTION__);
++
++	dma_async_device_unregister(dma_dev);
++
++	return 0;
++}
++
++static const struct of_device_id rt2880_dma_match[] = {
++	{ .compatible = "ralink,rt2880-gdma" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, rt2880_wdt_match);
++
++static struct platform_driver rt2880_dma_driver = {
++	.probe		= rt2880_dma_probe,
++	.remove		= rt2880_dma_remove,
++	.driver		= {
++		.owner	= THIS_MODULE,
++		.name	= RT_DMA_NAME,
++		.of_match_table = rt2880_dma_match,
++	},
++};
++
++static int __init rt2880_dma_init(void)
++{
++	int rc;
++
++	rc = platform_driver_register(&rt2880_dma_driver);
++	return rc;
++}
++module_init(rt2880_dma_init);
++
++MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("DMA engine driver for Ralink DMA engine");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/dma/ralink_gdma.h b/drivers/dma/ralink_gdma.h
+new file mode 100644
+index 0000000..73e1948
+--- /dev/null
++++ b/drivers/dma/ralink_gdma.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2007, 2008, Marvell International Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms and conditions of the GNU General Public License,
++ * version 2, as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++
++#ifndef RT_DMA_H
++#define RT_DMA_H
++
++#include <linux/types.h>
++#include <linux/io.h>
++#include <linux/dmaengine.h>
++#include <linux/interrupt.h>
++
++#define RT_DMA_NAME		"rt2880_dma"
++
++#define RALINK_GDMA_BASE	0xB0002800
++
++struct rt2880_dma_chan {
++        int                     pending;
++        dma_cookie_t            completed_cookie;
++        spinlock_t              lock; /* protects the descriptor slot pool */
++        void __iomem            *mmr_base;
++        unsigned int            idx;
++        enum dma_transaction_type       current_type;
++	struct dma_async_tx_descriptor txd;
++        struct list_head        chain;
++        struct list_head        completed_slots;
++        struct dma_chan         common;
++        struct list_head        all_slots;
++        int                     slots_allocated;
++        struct tasklet_struct   irq_tasklet;
++};
++
++#define RT_DMA_READ_REG(addr)             le32_to_cpu(*(volatile u32 *)(addr))
++#define RT_DMA_WRITE_REG(addr, val)       *((volatile uint32_t *)(addr)) = cpu_to_le32(val)
++
++#define RT_DMA_SRC_REG(ch)                (RALINK_GDMA_BASE + ch*16)
++#define RT_DMA_DST_REG(ch)                (RT_DMA_SRC_REG(ch) + 4)
++#define RT_DMA_CTRL_REG(ch)               (RT_DMA_DST_REG(ch) + 4)
++#define RT_DMA_CTRL_REG1(ch)              (RT_DMA_CTRL_REG(ch) + 4)
++#define RT_DMA_DONEINT			  (RALINK_GDMA_BASE + 0x204)
++
++#endif
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0134-PCI-MIPS-adds-rt2880-pci-support.patch b/target/linux/ramips/patches-3.8/0062-PCI-MIPS-adds-rt2880-pci-support.patch
index 70758f1422..108455d1c2 100644
--- a/target/linux/ramips/patches-3.8/0134-PCI-MIPS-adds-rt2880-pci-support.patch
+++ b/target/linux/ramips/patches-3.8/0062-PCI-MIPS-adds-rt2880-pci-support.patch
@@ -1,7 +1,7 @@
-From 55e9ae6a23cb799b7c1d402e1cfda11a6bd1e86e Mon Sep 17 00:00:00 2001
+From ac237657b04e464f28e8fe428d032386ca8b0b31 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Thu, 21 Mar 2013 18:27:29 +0100
-Subject: [PATCH 134/137] PCI: MIPS: adds rt2880 pci support
+Subject: [PATCH 62/79] PCI: MIPS: adds rt2880 pci support
 
 Add support for the pci found on the rt2880 SoC.
 
@@ -13,9 +13,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  3 files changed, 283 insertions(+)
  create mode 100644 arch/mips/pci/pci-rt2880.c
 
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index ce995d3..c7c18ce 100644
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1
+@@ -42,6 +42,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
  obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
  obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
  obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
@@ -23,6 +25,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
  obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
  obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
+diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
+new file mode 100644
+index 0000000..e2c4730
 --- /dev/null
 +++ b/arch/mips/pci/pci-rt2880.c
 @@ -0,0 +1,281 @@
@@ -307,6 +312,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +}
 +
 +arch_initcall(pcibios_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 38540a4..2d39329 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -8,6 +8,7 @@ choice
@@ -317,3 +324,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	config SOC_RT305X
  		bool "RT305x"
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0135-PCI-MIPS-adds-rt3883-pci-support.patch b/target/linux/ramips/patches-3.8/0063-PCI-MIPS-adds-rt3883-pci-support.patch
index 9c4ca82404..c1c8f75f6e 100644
--- a/target/linux/ramips/patches-3.8/0135-PCI-MIPS-adds-rt3883-pci-support.patch
+++ b/target/linux/ramips/patches-3.8/0063-PCI-MIPS-adds-rt3883-pci-support.patch
@@ -1,7 +1,7 @@
-From 2a5dccdb00d85a6ad6111d7a2b13f9f4fae35838 Mon Sep 17 00:00:00 2001
+From 5b942b64c01b57cbde0dff2185728d5a8facea76 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Thu, 21 Mar 2013 17:34:08 +0100
-Subject: [PATCH 135/137] PCI: MIPS: adds rt3883 pci support
+Subject: [PATCH 63/79] PCI: MIPS: adds rt3883 pci support
 
 Add support for the pcie found on the rt3883 SoC.
 
@@ -13,9 +13,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  3 files changed, 642 insertions(+)
  create mode 100644 arch/mips/pci/pci-rt3883.c
 
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index c7c18ce..a238158 100644
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops
+@@ -43,6 +43,7 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
  obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
  obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
  obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
@@ -23,6 +25,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
  obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
  obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
+diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
+new file mode 100644
+index 0000000..212c90b
 --- /dev/null
 +++ b/arch/mips/pci/pci-rt3883.c
 @@ -0,0 +1,640 @@
@@ -666,6 +671,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +}
 +
 +postcore_initcall(rt3883_pci_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 2d39329..f2f20ec 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -20,6 +20,7 @@ choice
@@ -676,3 +683,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	config SOC_MT7620
  		bool "MT7620"
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0064-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-3.8/0064-PCI-MIPS-adds-mt7620a-pcie-driver.patch
new file mode 100644
index 0000000000..b3b0ad4310
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0064-PCI-MIPS-adds-mt7620a-pcie-driver.patch
@@ -0,0 +1,409 @@
+From 44712deb87f994f837796a55f670bf4c0d0d5b51 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 20 Jun 2013 18:48:58 +0200
+Subject: [PATCH 64/79] PCI: MIPS: adds mt7620a pcie driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/pci/Makefile      |    1 +
+ arch/mips/pci/pci-mt7620a.c |  363 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/Kconfig    |    1 +
+ 3 files changed, 365 insertions(+)
+ create mode 100644 arch/mips/pci/pci-mt7620a.c
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index a238158..168d477 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -44,6 +44,7 @@ obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
+ obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
++obj-$(CONFIG_SOC_MT7620)	+= pci-mt7620a.o
+ obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
+diff --git a/arch/mips/pci/pci-mt7620a.c b/arch/mips/pci/pci-mt7620a.c
+new file mode 100644
+index 0000000..271763c
+--- /dev/null
++++ b/arch/mips/pci/pci-mt7620a.c
+@@ -0,0 +1,363 @@
++/*
++ *  Ralink MT7620A SoC PCI support
++ *
++ *  Copyright (C) 2007-2013 Bruce Chang
++ *  Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++#include <linux/reset.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RALINK_PCI_MM_MAP_BASE		0x20000000
++#define RALINK_PCI_IO_MAP_BASE		0x10160000
++
++#define RALINK_INT_PCIE0		4
++#define RALINK_SYSTEM_CONTROL_BASE	0xb0000000
++#define RALINK_SYSCFG1			0x14
++#define RALINK_CLKCFG1			0x30
++#define RALINK_GPIOMODE			0x60
++#define RALINK_PCIE_CLK_GEN		0x7c
++#define RALINK_PCIE_CLK_GEN1		0x80
++#define PCIEPHY0_CFG			0x90
++#define PPLL_CFG1			0x9c
++#define PPLL_DRV			0xa0
++#define RALINK_PCI_HOST_MODE_EN		(1<<7)
++#define RALINK_PCIE_RC_MODE_EN		(1<<8)
++#define RALINK_PCIE_RST			(1<<23)
++#define RALINK_PCI_RST			(1<<24)
++#define RALINK_PCI_CLK_EN		(1<<19)
++#define RALINK_PCIE_CLK_EN		(1<<21)
++#define PCI_SLOTx2			(1<<11)
++#define PCI_SLOTx1			(2<<11)
++#define PDRV_SW_SET			(1<<31)
++#define LC_CKDRVPD_			(1<<19)
++
++#define RALINK_PCI_CONFIG_ADDR		0x20
++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG	0x24
++#define MEMORY_BASE			0x0
++#define RALINK_PCIE0_RST		(1<<26)
++#define RALINK_PCI_BASE			0xB0140000
++#define RALINK_PCI_MEMBASE		0x28
++#define RALINK_PCI_IOBASE		0x2C
++
++#define RT6855_PCIE0_OFFSET		0x2000
++
++#define RALINK_PCI_PCICFG_ADDR		0x00
++#define RALINK_PCI0_BAR0SETUP_ADDR	0x10
++#define RALINK_PCI0_IMBASEBAR0_ADDR	0x18
++#define RALINK_PCI0_ID			0x30
++#define RALINK_PCI0_CLASS		0x34
++#define RALINK_PCI0_SUBID		0x38
++#define RALINK_PCI0_STATUS		0x50
++#define RALINK_PCI_PCIMSK_ADDR		0x0C
++
++#define RALINK_PCIE0_CLK_EN		(1 << 26)
++
++#define BUSY				0x80000000
++#define WAITRETRY_MAX			10
++#define WRITE_MODE			(1UL << 23)
++#define DATA_SHIFT			0
++#define ADDR_SHIFT			8
++
++
++static void __iomem *bridge_base;
++static void __iomem *pcie_base;
++
++static struct reset_control *rstpcie0;
++
++static inline void bridge_w32(u32 val, unsigned reg)
++{
++	iowrite32(val, bridge_base + reg);
++}
++
++static inline u32 bridge_r32(unsigned reg)
++{
++	return ioread32(bridge_base + reg);
++}
++
++static inline void pcie_w32(u32 val, unsigned reg)
++{
++	iowrite32(val, pcie_base + reg);
++}
++
++static inline u32 pcie_r32(unsigned reg)
++{
++	return ioread32(pcie_base + reg);
++}
++
++static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
++{
++	u32 val = pcie_r32(reg);
++	val &= ~clr;
++	val |= set;
++	pcie_w32(val, reg);
++}
++
++int wait_pciephy_busy(void)
++{
++	unsigned long reg_value = 0x0, retry = 0;
++
++	while (1) {
++		//reg_value = rareg(READMODE, PCIEPHY0_CFG, 0);
++		reg_value = pcie_r32(PCIEPHY0_CFG);
++
++		if (reg_value & BUSY)
++			mdelay(100);
++		else
++			break;
++		if (retry++ > WAITRETRY_MAX){
++			printk("PCIE-PHY retry failed.\n");
++			return -1;
++		}
++	}
++	return 0;
++}
++
++static void pcie_phy(unsigned long addr, unsigned long val)
++{
++	wait_pciephy_busy();
++	pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG);
++	mdelay(1);
++	wait_pciephy_busy();
++}
++
++static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
++{
++	unsigned int slot = PCI_SLOT(devfn);
++	u8 func = PCI_FUNC(devfn);
++	u32 address;
++	u32 data;
++
++	address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++	bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
++	data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++	switch (size) {
++	case 1:
++		*val = (data >> ((where & 3) << 3)) & 0xff;
++		break;
++	case 2:
++		*val = (data >> ((where & 3) << 3)) & 0xffff;
++		break;
++	case 4:
++		*val = data;
++		break;
++	}
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
++{
++	unsigned int slot = PCI_SLOT(devfn);
++	u8 func = PCI_FUNC(devfn);
++	u32 address;
++	u32 data;
++
++	address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++	bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
++	data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++	switch (size) {
++	case 1:
++		data = (data & ~(0xff << ((where & 3) << 3))) |
++			(val << ((where & 3) << 3));
++		break;
++	case 2:
++		data = (data & ~(0xffff << ((where & 3) << 3))) |
++			(val << ((where & 3) << 3));
++		break;
++	case 4:
++		data = val;
++		break;
++	}
++
++	bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++struct pci_ops mt7620a_pci_ops= {
++	.read	= pci_config_read,
++	.write	= pci_config_write,
++};
++
++static struct resource mt7620a_res_pci_mem1 = {
++	.name	= "pci memory",
++	.start	= RALINK_PCI_MM_MAP_BASE,
++	.end	= (u32) ((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
++	.flags	= IORESOURCE_MEM,
++};
++static struct resource mt7620a_res_pci_io1 = {
++	.name	= "pci io",
++	.start	= RALINK_PCI_IO_MAP_BASE,
++	.end	= (u32) ((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
++	.flags	= IORESOURCE_IO,
++};
++
++struct pci_controller mt7620a_controller = {
++	.pci_ops	= &mt7620a_pci_ops,
++	.mem_resource	= &mt7620a_res_pci_mem1,
++	.io_resource	= &mt7620a_res_pci_io1,
++	.mem_offset	= 0x00000000UL,
++	.io_offset	= 0x00000000UL,
++	.io_map_base	= 0xa0000000,
++};
++
++static int mt7620a_pci_probe(struct platform_device *pdev)
++{
++	struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++	rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
++	if (IS_ERR(rstpcie0))
++		return PTR_ERR(rstpcie0);
++
++	bridge_base = devm_request_and_ioremap(&pdev->dev, bridge_res);
++        if (!bridge_base)
++		return -ENOMEM;
++
++	pcie_base = devm_request_and_ioremap(&pdev->dev, pcie_res);
++        if (!pcie_base)
++		return -ENOMEM;
++
++	iomem_resource.start = 0;
++	iomem_resource.end= ~0;
++	ioport_resource.start= 0;
++	ioport_resource.end = ~0;
++
++	/* PCIE: bypass PCIe DLL */
++	pcie_phy(0x0, 0x80);
++	pcie_phy(0x1, 0x04);
++	/* PCIE: Elastic buffer control */
++	pcie_phy(0x68, 0xB4);
++
++	reset_control_assert(rstpcie0);
++	rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++	rt_sysc_m32(1<<19, 1<<31, PPLL_DRV);
++	rt_sysc_m32(0x3 << 16, 0, RALINK_GPIOMODE);
++
++	reset_control_deassert(rstpcie0);
++	rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
++
++	mdelay(100);
++
++	if (!(rt_sysc_r32(PPLL_CFG1) & 1<<23)) {
++		printk("MT7620 PPLL unlock\n");
++		reset_control_assert(rstpcie0);
++		rt_sysc_m32(BIT(26), 0, RALINK_CLKCFG1);
++		return 0;
++	}
++	rt_sysc_m32((0x1<<18) | (0x1<<17), (0x1 << 19) | (0x1 << 31), PPLL_DRV);
++
++	mdelay(100);
++	reset_control_assert(rstpcie0);
++	rt_sysc_m32(0x30, 2 << 4, RALINK_SYSCFG1);
++
++	rt_sysc_m32(~0x7fffffff, 0x80000000, RALINK_PCIE_CLK_GEN);
++	rt_sysc_m32(~0x80ffffff, 0xa << 24, RALINK_PCIE_CLK_GEN1);
++
++	mdelay(50);
++	reset_control_deassert(rstpcie0);
++	pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR);
++	mdelay(100);
++
++	if (( pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) {
++		reset_control_assert(rstpcie0);
++		rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++		rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV);
++		printk("PCIE0 no card, disable it(RST&CLK)\n");
++	}
++
++	bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
++	bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
++
++	pcie_w32(0x7FFF0000, RALINK_PCI0_BAR0SETUP_ADDR);
++	pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
++	pcie_w32(0x08021814, RALINK_PCI0_ID);
++	pcie_w32(0x06040001, RALINK_PCI0_CLASS);
++	pcie_w32(0x28801814, RALINK_PCI0_SUBID);
++	pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR);
++
++	register_pci_controller(&mt7620a_controller);
++
++	return 0;
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	const struct resource *res;
++	u16 cmd;
++	u32 val;
++	int i, irq = 0;
++
++	if ((dev->bus->number == 0) && (slot == 0)) {
++		pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE
++		pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE);
++		pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
++	} else if ((dev->bus->number == 1) && (slot == 0x0)) {
++		irq = RALINK_INT_PCIE0;
++	} else {
++		printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
++		return 0;
++	}
++
++	for (i = 0; i < 6; i++) {
++		res = &dev->resource[i];
++	}
++
++	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);  //configure cache line size 0x14
++	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF);  //configure latency timer 0x10
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++
++	// FIXME
++	cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
++	pci_write_config_word(dev, PCI_COMMAND, cmd);
++	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
++	//pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq);
++
++	return irq;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++	return 0;
++}
++
++static const struct of_device_id mt7620a_pci_ids[] = {
++	{ .compatible = "ralink,mt7620a-pci" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, mt7620a_pci_ids);
++
++static struct platform_driver mt7620a_pci_driver = {
++	.probe = mt7620a_pci_probe,
++	.driver = {
++		.name = "mt7620a-pci",
++		.owner = THIS_MODULE,
++		.of_match_table = of_match_ptr(mt7620a_pci_ids),
++	},
++};
++
++static int __init mt7620a_pci_init(void)
++{
++	return platform_driver_register(&mt7620a_pci_driver);
++}
++
++arch_initcall(mt7620a_pci_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index f2f20ec..f89fdf8 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -24,6 +24,7 @@ choice
+ 
+ 	config SOC_MT7620
+ 		bool "MT7620"
++		select HW_HAS_PCI
+ 
+ endchoice
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0065-watchdog-adds-ralink-wdt.patch b/target/linux/ramips/patches-3.8/0065-watchdog-adds-ralink-wdt.patch
new file mode 100644
index 0000000000..5d446eea9b
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0065-watchdog-adds-ralink-wdt.patch
@@ -0,0 +1,275 @@
+From 8eaa4bef40d38a4954389a2552504ea2d1c4a68a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Apr 2013 23:23:07 +0200
+Subject: [PATCH 65/79] watchdog: adds ralink wdt
+
+Adds the watchdog driver for ralink SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c     |    1 +
+ drivers/watchdog/Kconfig      |    7 ++
+ drivers/watchdog/Makefile     |    1 +
+ drivers/watchdog/rt2880_wdt.c |  208 +++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 217 insertions(+)
+ create mode 100644 drivers/watchdog/rt2880_wdt.c
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 08c96db6..4956d96 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -182,6 +182,7 @@ void __init ralink_clk_init(void)
+ 
+ 	ralink_clk_add("cpu", cpu_rate);
+ 	ralink_clk_add("10000100.timer", 40000000);
++	ralink_clk_add("10000120.watchdog", 40000000);
+ 	ralink_clk_add("10000500.uart", 40000000);
+ 	ralink_clk_add("10000b00.spi", 40000000);
+ 	ralink_clk_add("10000c00.uartlite", 40000000);
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index 7f809fd..c8c7454 100644
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1076,6 +1076,13 @@ config LANTIQ_WDT
+ 	help
+ 	  Hardware driver for the Lantiq SoC Watchdog Timer.
+ 
++config RALINK_WDT
++	tristate "Ralink SoC watchdog"
++	select WATCHDOG_CORE
++	depends on RALINK
++	help
++	  Hardware driver for the Ralink SoC Watchdog Timer.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
+index 97bbdb3a..0203784 100644
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+ obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
++obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
+ 
+ # PARISC Architecture
+ 
+diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c
+new file mode 100644
+index 0000000..3df65a4
+--- /dev/null
++++ b/drivers/watchdog/rt2880_wdt.c
+@@ -0,0 +1,208 @@
++/*
++ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
++ *
++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ * This driver was based on: drivers/watchdog/softdog.c
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/clk.h>
++#include <linux/reset.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/watchdog.h>
++#include <linux/miscdevice.h>
++#include <linux/moduleparam.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define SYSC_RSTSTAT			0x38
++#define WDT_RST_CAUSE			BIT(1)
++
++#define RALINK_WDT_TIMEOUT		30
++#define RALINK_WDT_PRESCALE		65536
++
++#define TIMER_REG_TMR1LOAD		0x00
++#define TIMER_REG_TMR1CTL		0x08
++
++#define TMRSTAT_TMR1RST			BIT(5)
++
++#define TMR1CTL_ENABLE			BIT(7)
++#define TMR1CTL_MODE_SHIFT		4
++#define TMR1CTL_MODE_MASK		0x3
++#define TMR1CTL_MODE_FREE_RUNNING	0x0
++#define TMR1CTL_MODE_PERIODIC		0x1
++#define TMR1CTL_MODE_TIMEOUT		0x2
++#define TMR1CTL_MODE_WDT		0x3
++#define TMR1CTL_PRESCALE_MASK		0xf
++#define TMR1CTL_PRESCALE_65536		0xf
++
++static struct clk *rt288x_wdt_clk;
++static unsigned long rt288x_wdt_freq;
++static void __iomem *rt288x_wdt_base;
++
++static bool nowayout = WATCHDOG_NOWAYOUT;
++module_param(nowayout, bool, 0);
++MODULE_PARM_DESC(nowayout,
++		"Watchdog cannot be stopped once started (default="
++		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
++
++static inline void rt_wdt_w32(unsigned reg, u32 val)
++{
++	iowrite32(val, rt288x_wdt_base + reg);
++}
++
++static inline u32 rt_wdt_r32(unsigned reg)
++{
++	return ioread32(rt288x_wdt_base + reg);
++}
++
++static int rt288x_wdt_ping(struct watchdog_device *w)
++{
++        rt_wdt_w32(TIMER_REG_TMR1LOAD, w->timeout * rt288x_wdt_freq);
++
++	return 0;
++}
++
++static int rt288x_wdt_start(struct watchdog_device *w)
++{
++	u32 t;
++
++	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++	t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT |
++		TMR1CTL_PRESCALE_MASK);
++	t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT |
++		TMR1CTL_PRESCALE_65536);
++	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++
++	rt288x_wdt_ping(w);
++
++	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++	t |= TMR1CTL_ENABLE;
++	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++
++	return 0;
++}
++
++static int rt288x_wdt_stop(struct watchdog_device *w)
++{
++	u32 t;
++
++	rt288x_wdt_ping(w);
++
++	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++	t &= ~TMR1CTL_ENABLE;
++	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++
++	return 0;
++}
++
++static int rt288x_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
++{
++	w->timeout = t;
++	rt288x_wdt_ping(w);
++
++	return 0;
++}
++
++static int rt288x_wdt_bootcause(void)
++{
++	if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
++		return WDIOF_CARDRESET;
++
++	return 0;
++}
++
++static struct watchdog_info rt288x_wdt_info = {
++	.identity = "Ralink Watchdog",
++	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
++};
++
++static struct watchdog_ops rt288x_wdt_ops = {
++	.owner = THIS_MODULE,
++	.start = rt288x_wdt_start,
++	.stop = rt288x_wdt_stop,
++	.ping = rt288x_wdt_ping,
++	.set_timeout = rt288x_wdt_set_timeout,
++};
++
++static struct watchdog_device rt288x_wdt_dev = {
++	.info = &rt288x_wdt_info,
++	.ops = &rt288x_wdt_ops,
++	.min_timeout = 1,
++};
++
++static int rt288x_wdt_probe(struct platform_device *pdev)
++{
++	struct resource *res;
++	int ret;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++        rt288x_wdt_base = devm_request_and_ioremap(&pdev->dev, res);
++	if (IS_ERR(rt288x_wdt_base))
++		return PTR_ERR(rt288x_wdt_base);
++
++	rt288x_wdt_clk = devm_clk_get(&pdev->dev, NULL);
++	if (IS_ERR(rt288x_wdt_clk))
++		return PTR_ERR(rt288x_wdt_clk);
++
++	device_reset(&pdev->dev);
++
++	rt288x_wdt_freq = clk_get_rate(rt288x_wdt_clk) / RALINK_WDT_PRESCALE;
++
++	rt288x_wdt_dev.dev = &pdev->dev;
++	rt288x_wdt_dev.bootstatus = rt288x_wdt_bootcause();
++
++	rt288x_wdt_dev.timeout = RALINK_WDT_TIMEOUT;
++	rt288x_wdt_dev.max_timeout = (0xfffful / rt288x_wdt_freq);
++
++	watchdog_set_nowayout(&rt288x_wdt_dev, nowayout);
++
++	ret = watchdog_register_device(&rt288x_wdt_dev);
++	if (!ret)
++		dev_info(&pdev->dev, "Initialized\n");
++
++	return 0;
++}
++
++static int rt288x_wdt_remove(struct platform_device *pdev)
++{
++	watchdog_unregister_device(&rt288x_wdt_dev);
++
++	return 0;
++}
++
++static void rt288x_wdt_shutdown(struct platform_device *pdev)
++{
++	rt288x_wdt_stop(&rt288x_wdt_dev);
++}
++
++static const struct of_device_id rt288x_wdt_match[] = {
++	{ .compatible = "ralink,rt2880-wdt" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
++
++static struct platform_driver rt288x_wdt_driver = {
++	.probe		= rt288x_wdt_probe,
++	.remove		= rt288x_wdt_remove,
++	.shutdown	= rt288x_wdt_shutdown,
++	.driver		= {
++		.name		= KBUILD_MODNAME,
++		.owner		= THIS_MODULE,
++		.of_match_table	= rt288x_wdt_match,
++	},
++};
++
++module_platform_driver(rt288x_wdt_driver);
++
++MODULE_DESCRIPTION("MediaTek/Ralink RT288x/RT3xxx hardware watchdog driver");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0066-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-3.8/0066-i2c-MIPS-adds-ralink-I2C-driver.patch
new file mode 100644
index 0000000000..286020a148
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0066-i2c-MIPS-adds-ralink-I2C-driver.patch
@@ -0,0 +1,358 @@
+From 68fc18202484e98861ef7eed2a78b64b16c73db9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 29 Apr 2013 14:40:43 +0200
+Subject: [PATCH 66/79] i2c: MIPS: adds ralink I2C driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../devicetree/bindings/i2c/i2c-ralink.txt         |   27 ++
+ drivers/i2c/busses/Kconfig                         |    4 +
+ drivers/i2c/busses/Makefile                        |    1 +
+ drivers/i2c/busses/i2c-ralink.c                    |  274 ++++++++++++++++++++
+ 4 files changed, 306 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+ create mode 100644 drivers/i2c/busses/i2c-ralink.c
+
+diff --git a/Documentation/devicetree/bindings/i2c/i2c-ralink.txt b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+new file mode 100644
+index 0000000..8fa8ac3
+--- /dev/null
++++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+@@ -0,0 +1,27 @@
++I2C for Ralink platforms
++
++Required properties :
++- compatible : Must be "link,rt3052-i2c"
++- reg: physical base address of the controller and length of memory mapped
++     region.
++- #address-cells = <1>;
++- #size-cells = <0>;
++
++Optional properties:
++- Child nodes conforming to i2c bus binding
++
++Example :
++
++palmbus@10000000 {
++	i2c@900 {
++		compatible = "link,rt3052-i2c";
++		reg = <0x900 0x100>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		hwmon@4b {
++			compatible = "national,lm92";
++			reg = <0x4b>;
++		};
++	};
++};
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index bdca511..19b1105 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -604,6 +604,10 @@ config I2C_PXA_SLAVE
+ 	  is necessary for systems where the PXA may be a target on the
+ 	  I2C bus.
+ 
++config I2C_RALINK
++	tristate "Ralink I2C Controller"
++	select OF_I2C
++
+ config HAVE_S3C2410_I2C
+ 	bool
+ 	help
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 6181f3f..4cf4a88 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -60,6 +60,7 @@ obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
+ obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
+ obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
+ obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
++obj-$(CONFIG_I2C_RALINK)	+= i2c-ralink.o
+ obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
+ obj-$(CONFIG_I2C_S6000)		+= i2c-s6000.o
+ obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
+diff --git a/drivers/i2c/busses/i2c-ralink.c b/drivers/i2c/busses/i2c-ralink.c
+new file mode 100644
+index 0000000..b5abf0f
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-ralink.c
+@@ -0,0 +1,274 @@
++/*
++ * drivers/i2c/busses/i2c-ralink.c
++ *
++ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <linux/io.h>
++#include <linux/of_i2c.h>
++#include <linux/err.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define REG_CONFIG_REG		0x00
++#define REG_CLKDIV_REG		0x04
++#define REG_DEVADDR_REG		0x08
++#define REG_ADDR_REG		0x0C
++#define REG_DATAOUT_REG		0x10
++#define REG_DATAIN_REG		0x14
++#define REG_STATUS_REG		0x18
++#define REG_STARTXFR_REG	0x1C
++#define REG_BYTECNT_REG		0x20
++
++#define I2C_STARTERR		BIT(4)
++#define I2C_ACKERR		BIT(3)
++#define I2C_DATARDY		BIT(2)
++#define I2C_SDOEMPTY		BIT(1)
++#define I2C_BUSY		BIT(0)
++
++#define I2C_DEVADLEN_7		(6 << 2)
++#define I2C_ADDRDIS		BIT(1)
++
++#define I2C_RETRY		0x400
++
++#define CLKDIV_VALUE		600
++
++#define READ_CMD		0x01
++#define WRITE_CMD		0x00
++#define READ_BLOCK              64
++
++static void __iomem *membase;
++static struct i2c_adapter *adapter;
++
++static void rt_i2c_w32(u32 val, unsigned reg)
++{
++	iowrite32(val, membase + reg);
++}
++
++static u32 rt_i2c_r32(unsigned reg)
++{
++	return ioread32(membase + reg);
++}
++
++static inline int rt_i2c_wait_rx_done(void)
++{
++	int retries = I2C_RETRY;
++
++	do {
++		if (!retries--)
++			break;
++	} while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY));
++
++	return (retries < 0);
++}
++
++static inline int rt_i2c_wait_idle(void)
++{
++	int retries = I2C_RETRY;
++
++	do {
++		if (!retries--)
++			break;
++	} while(rt_i2c_r32(REG_STATUS_REG) & I2C_BUSY);
++
++	return (retries < 0);
++}
++
++static inline int rt_i2c_wait_tx_done(void)
++{
++	int retries = I2C_RETRY;
++
++	do {
++		if (!retries--)
++			break;
++	} while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY));
++
++	return (retries < 0);
++}
++
++static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg)
++{
++	int i = 0, j = 0, pos = 0;
++	int nblock = msg->len / READ_BLOCK;
++        int rem = msg->len % READ_BLOCK;
++
++	if (msg->flags & I2C_M_TEN) {
++		printk("10 bits addr not supported\n");
++		return -EINVAL;
++	}
++
++	if (msg->flags & I2C_M_RD) {
++		for (i = 0; i < nblock; i++) {
++			rt_i2c_wait_idle();
++			rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG);
++			rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
++			for (j = 0; j < READ_BLOCK; j++) {
++				if (rt_i2c_wait_rx_done())
++					return -1;
++				msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
++			}
++		}
++
++		rt_i2c_wait_idle();
++		rt_i2c_w32(rem - 1, REG_BYTECNT_REG);
++		rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
++		for (i = 0; i < rem; i++) {
++			if (rt_i2c_wait_rx_done())
++				return -1;
++			msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
++		}
++	} else {
++		rt_i2c_wait_idle();
++		rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG);
++		rt_i2c_w32(msg->buf[0], REG_DATAOUT_REG);
++		rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG);
++		for (i = 1; i < msg->len; i++) {
++			rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG);
++			if (rt_i2c_wait_tx_done())
++				return -1;
++		}
++	}
++
++	return msg->len;
++}
++
++static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n)
++{
++	int i = 0;
++	int ret = 0;
++
++	if (rt_i2c_wait_idle()) {
++		printk("i2c transfer failed\n");
++		return 0;
++	}
++
++	device_reset(a->dev.parent);
++
++	rt_i2c_w32(m->addr, REG_DEVADDR_REG);
++	rt_i2c_w32(I2C_DEVADLEN_7 | I2C_ADDRDIS, REG_CONFIG_REG);
++	rt_i2c_w32(CLKDIV_VALUE, REG_CLKDIV_REG);
++
++	for (i = 0; i < n && !ret; i++)
++		ret = rt_i2c_handle_msg(a, &m[i]);
++
++	if (ret) {
++		printk("i2c transfer failed\n");
++		return 0;
++	}
++
++	return n;
++}
++
++static u32 rt_i2c_func(struct i2c_adapter *a)
++{
++	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++static const struct i2c_algorithm rt_i2c_algo = {
++	.master_xfer	= rt_i2c_master_xfer,
++	.functionality	= rt_i2c_func,
++};
++
++static int rt_i2c_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	int ret;
++
++	if (!res) {
++		dev_err(&pdev->dev, "no memory resource found\n");
++		return -ENODEV;
++	}
++
++	adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
++	if (!adapter) {
++		dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
++		return -ENOMEM;
++	}
++
++	membase = devm_request_and_ioremap(&pdev->dev, res);
++	if (IS_ERR(membase))
++		return PTR_ERR(membase);
++
++	strlcpy(adapter->name, dev_name(&pdev->dev), sizeof(adapter->name));
++	adapter->owner = THIS_MODULE;
++	adapter->nr = pdev->id;
++	adapter->timeout = HZ;
++	adapter->algo = &rt_i2c_algo;
++	adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++	adapter->dev.parent = &pdev->dev;
++	adapter->dev.of_node = pdev->dev.of_node;
++
++	ret = i2c_add_numbered_adapter(adapter);
++	if (ret)
++		return ret;
++
++	of_i2c_register_devices(adapter);
++
++	platform_set_drvdata(pdev, adapter);
++
++	dev_info(&pdev->dev, "loaded\n");
++
++	return 0;
++}
++
++static int rt_i2c_remove(struct platform_device *pdev)
++{
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static const struct of_device_id i2c_rt_dt_ids[] = {
++	{ .compatible = "ralink,rt2880-i2c", },
++	{ /* sentinel */ }
++};
++
++MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
++
++static struct platform_driver rt_i2c_driver = {
++	.probe		= rt_i2c_probe,
++	.remove		= rt_i2c_remove,
++	.driver		= {
++		.owner	= THIS_MODULE,
++		.name	= "i2c-ralink",
++		.of_match_table = i2c_rt_dt_ids,
++	},
++};
++
++static int __init i2c_rt_init (void)
++{
++	return platform_driver_register(&rt_i2c_driver);
++}
++subsys_initcall(i2c_rt_init);
++
++static void __exit i2c_rt_exit (void)
++{
++	platform_driver_unregister(&rt_i2c_driver);
++}
++
++module_exit (i2c_rt_exit);
++
++MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
++MODULE_DESCRIPTION("Ralink I2c host driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:Ralink-I2C");
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0067-reset-Add-reset-controller-API.patch b/target/linux/ramips/patches-3.8/0067-reset-Add-reset-controller-API.patch
new file mode 100644
index 0000000000..55bbb56d00
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0067-reset-Add-reset-controller-API.patch
@@ -0,0 +1,554 @@
+From 8951e08252c6c254d68c350468c40f88a12bcc1d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 20 May 2013 15:42:01 +0200
+Subject: [PATCH 67/79] reset: Add reset controller API
+
+backport from v3.10-rc1
+61fc41317666be400802ac793f47de816ef7bd57
+6034bb22d8387708075c083385e5d2e1072a4f33
+4e11f848c65b1c87782cb232a6e3b47a9d4c1f98
+
+This adds a simple API for devices to request being reset
+by separate reset controller hardware and implements the
+reset signal device tree binding.
+
+Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
+Reviewed-by: Stephen Warren <swarren@nvidia.com>
+Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
+Reviewed-by: Marek Vasut <marex@denx.de>
+Reviewed-by: Pavel Machek <pavel@ucw.cz>
+---
+ Documentation/devicetree/bindings/reset/reset.txt |   75 ++++++
+ drivers/Kconfig                                   |    2 +
+ drivers/Makefile                                  |    3 +
+ drivers/reset/Kconfig                             |   13 +
+ drivers/reset/Makefile                            |    1 +
+ drivers/reset/core.c                              |  297 +++++++++++++++++++++
+ include/linux/reset-controller.h                  |   51 ++++
+ include/linux/reset.h                             |   17 ++
+ 8 files changed, 459 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/reset/reset.txt
+ create mode 100644 drivers/reset/Kconfig
+ create mode 100644 drivers/reset/Makefile
+ create mode 100644 drivers/reset/core.c
+ create mode 100644 include/linux/reset-controller.h
+ create mode 100644 include/linux/reset.h
+
+diff --git a/Documentation/devicetree/bindings/reset/reset.txt b/Documentation/devicetree/bindings/reset/reset.txt
+new file mode 100644
+index 0000000..31db6ff
+--- /dev/null
++++ b/Documentation/devicetree/bindings/reset/reset.txt
+@@ -0,0 +1,75 @@
++= Reset Signal Device Tree Bindings =
++
++This binding is intended to represent the hardware reset signals present
++internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole
++standalone chips are most likely better represented as GPIOs, although there
++are likely to be exceptions to this rule.
++
++Hardware blocks typically receive a reset signal. This signal is generated by
++a reset provider (e.g. power management or clock module) and received by a
++reset consumer (the module being reset, or a module managing when a sub-
++ordinate module is reset). This binding exists to represent the provider and
++consumer, and provide a way to couple the two together.
++
++A reset signal is represented by the phandle of the provider, plus a reset
++specifier - a list of DT cells that represents the reset signal within the
++provider. The length (number of cells) and semantics of the reset specifier
++are dictated by the binding of the reset provider, although common schemes
++are described below.
++
++A word on where to place reset signal consumers in device tree: It is possible
++in hardware for a reset signal to affect multiple logically separate HW blocks
++at once. In this case, it would be unwise to represent this reset signal in
++the DT node of each affected HW block, since if activated, an unrelated block
++may be reset. Instead, reset signals should be represented in the DT node
++where it makes most sense to control it; this may be a bus node if all
++children of the bus are affected by the reset signal, or an individual HW
++block node for dedicated reset signals. The intent of this binding is to give
++appropriate software access to the reset signals in order to manage the HW,
++rather than to slavishly enumerate the reset signal that affects each HW
++block.
++
++= Reset providers =
++
++Required properties:
++#reset-cells:	Number of cells in a reset specifier; Typically 0 for nodes
++		with a single reset output and 1 for nodes with multiple
++		reset outputs.
++
++For example:
++
++	rst: reset-controller {
++		#reset-cells = <1>;
++	};
++
++= Reset consumers =
++
++Required properties:
++resets:		List of phandle and reset specifier pairs, one pair
++		for each reset signal that affects the device, or that the
++		device manages. Note: if the reset provider specifies '0' for
++		#reset-cells, then only the phandle portion of the pair will
++		appear.
++
++Optional properties:
++reset-names:	List of reset signal name strings sorted in the same order as
++		the resets property. Consumers drivers will use reset-names to
++		match reset signal names with reset specifiers.
++
++For example:
++
++	device {
++		resets = <&rst 20>;
++		reset-names = "reset";
++	};
++
++This represents a device with a single reset signal named "reset".
++
++	bus {
++		resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>;
++		reset-names = "i2s1", "i2s2", "dma", "mixer";
++	};
++
++This represents a bus that controls the reset signal of each of four sub-
++ordinate devices. Consider for example a bus that fails to operate unless no
++child device has reset asserted.
+diff --git a/drivers/Kconfig b/drivers/Kconfig
+index f5fb072..51f73ae 100644
+--- a/drivers/Kconfig
++++ b/drivers/Kconfig
+@@ -158,4 +158,6 @@ source "drivers/irqchip/Kconfig"
+ 
+ source "drivers/ipack/Kconfig"
+ 
++source "drivers/reset/Kconfig"
++
+ endmenu
+diff --git a/drivers/Makefile b/drivers/Makefile
+index 7863b9f..2819ac0 100644
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -37,6 +37,9 @@ obj-$(CONFIG_XEN)		+= xen/
+ # regulators early, since some subsystems rely on them to initialize
+ obj-$(CONFIG_REGULATOR)		+= regulator/
+ 
++# reset controllers early, since gpu drivers might rely on them to initialize
++obj-$(CONFIG_RESET_CONTROLLER)	+= reset/
++
+ # tty/ comes before char/ so that the VT console is the boot-time
+ # default.
+ obj-y				+= tty/
+diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
+new file mode 100644
+index 0000000..c9d04f7
+--- /dev/null
++++ b/drivers/reset/Kconfig
+@@ -0,0 +1,13 @@
++config ARCH_HAS_RESET_CONTROLLER
++	bool
++
++menuconfig RESET_CONTROLLER
++	bool "Reset Controller Support"
++	default y if ARCH_HAS_RESET_CONTROLLER
++	help
++	  Generic Reset Controller support.
++
++	  This framework is designed to abstract reset handling of devices
++	  via GPIOs or SoC-internal reset controller modules.
++
++	  If unsure, say no.
+diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
+new file mode 100644
+index 0000000..1e2d83f
+--- /dev/null
++++ b/drivers/reset/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_RESET_CONTROLLER) += core.o
+diff --git a/drivers/reset/core.c b/drivers/reset/core.c
+new file mode 100644
+index 0000000..d1b6089
+--- /dev/null
++++ b/drivers/reset/core.c
+@@ -0,0 +1,297 @@
++/*
++ * Reset Controller framework
++ *
++ * Copyright 2013 Philipp Zabel, Pengutronix
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#include <linux/device.h>
++#include <linux/err.h>
++#include <linux/export.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/reset.h>
++#include <linux/reset-controller.h>
++#include <linux/slab.h>
++
++static DEFINE_MUTEX(reset_controller_list_mutex);
++static LIST_HEAD(reset_controller_list);
++
++/**
++ * struct reset_control - a reset control
++ * @rcdev: a pointer to the reset controller device
++ *         this reset control belongs to
++ * @id: ID of the reset controller in the reset
++ *      controller device
++ */
++struct reset_control {
++	struct reset_controller_dev *rcdev;
++	struct device *dev;
++	unsigned int id;
++};
++
++/**
++ * of_reset_simple_xlate - translate reset_spec to the reset line number
++ * @rcdev: a pointer to the reset controller device
++ * @reset_spec: reset line specifier as found in the device tree
++ * @flags: a flags pointer to fill in (optional)
++ *
++ * This simple translation function should be used for reset controllers
++ * with 1:1 mapping, where reset lines can be indexed by number without gaps.
++ */
++int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
++			  const struct of_phandle_args *reset_spec)
++{
++	if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
++		return -EINVAL;
++
++	if (reset_spec->args[0] >= rcdev->nr_resets)
++		return -EINVAL;
++
++	return reset_spec->args[0];
++}
++EXPORT_SYMBOL_GPL(of_reset_simple_xlate);
++
++/**
++ * reset_controller_register - register a reset controller device
++ * @rcdev: a pointer to the initialized reset controller device
++ */
++int reset_controller_register(struct reset_controller_dev *rcdev)
++{
++	if (!rcdev->of_xlate) {
++		rcdev->of_reset_n_cells = 1;
++		rcdev->of_xlate = of_reset_simple_xlate;
++	}
++
++	mutex_lock(&reset_controller_list_mutex);
++	list_add(&rcdev->list, &reset_controller_list);
++	mutex_unlock(&reset_controller_list_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(reset_controller_register);
++
++/**
++ * reset_controller_unregister - unregister a reset controller device
++ * @rcdev: a pointer to the reset controller device
++ */
++void reset_controller_unregister(struct reset_controller_dev *rcdev)
++{
++	mutex_lock(&reset_controller_list_mutex);
++	list_del(&rcdev->list);
++	mutex_unlock(&reset_controller_list_mutex);
++}
++EXPORT_SYMBOL_GPL(reset_controller_unregister);
++
++/**
++ * reset_control_reset - reset the controlled device
++ * @rstc: reset controller
++ */
++int reset_control_reset(struct reset_control *rstc)
++{
++	if (rstc->rcdev->ops->reset)
++		return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id);
++
++	return -ENOSYS;
++}
++EXPORT_SYMBOL_GPL(reset_control_reset);
++
++/**
++ * reset_control_assert - asserts the reset line
++ * @rstc: reset controller
++ */
++int reset_control_assert(struct reset_control *rstc)
++{
++	if (rstc->rcdev->ops->assert)
++		return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id);
++
++	return -ENOSYS;
++}
++EXPORT_SYMBOL_GPL(reset_control_assert);
++
++/**
++ * reset_control_deassert - deasserts the reset line
++ * @rstc: reset controller
++ */
++int reset_control_deassert(struct reset_control *rstc)
++{
++	if (rstc->rcdev->ops->deassert)
++		return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id);
++
++	return -ENOSYS;
++}
++EXPORT_SYMBOL_GPL(reset_control_deassert);
++
++/**
++ * reset_control_get - Lookup and obtain a reference to a reset controller.
++ * @dev: device to be reset by the controller
++ * @id: reset line name
++ *
++ * Returns a struct reset_control or IS_ERR() condition containing errno.
++ *
++ * Use of id names is optional.
++ */
++struct reset_control *reset_control_get(struct device *dev, const char *id)
++{
++	struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
++	struct reset_controller_dev *r, *rcdev;
++	struct of_phandle_args args;
++	int index = 0;
++	int rstc_id;
++	int ret;
++
++	if (!dev)
++		return ERR_PTR(-EINVAL);
++
++	if (id)
++		index = of_property_match_string(dev->of_node,
++						 "reset-names", id);
++	ret = of_parse_phandle_with_args(dev->of_node, "resets", "#reset-cells",
++					 index, &args);
++	if (ret)
++		return ERR_PTR(ret);
++
++	mutex_lock(&reset_controller_list_mutex);
++	rcdev = NULL;
++	list_for_each_entry(r, &reset_controller_list, list) {
++		if (args.np == r->of_node) {
++			rcdev = r;
++			break;
++		}
++	}
++	of_node_put(args.np);
++
++	if (!rcdev) {
++		mutex_unlock(&reset_controller_list_mutex);
++		return ERR_PTR(-ENODEV);
++	}
++
++	rstc_id = rcdev->of_xlate(rcdev, &args);
++	if (rstc_id < 0) {
++		mutex_unlock(&reset_controller_list_mutex);
++		return ERR_PTR(rstc_id);
++	}
++
++	try_module_get(rcdev->owner);
++	mutex_unlock(&reset_controller_list_mutex);
++
++	rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
++	if (!rstc) {
++		module_put(rcdev->owner);
++		return ERR_PTR(-ENOMEM);
++	}
++
++	rstc->dev = dev;
++	rstc->rcdev = rcdev;
++	rstc->id = rstc_id;
++
++	return rstc;
++}
++EXPORT_SYMBOL_GPL(reset_control_get);
++
++/**
++ * reset_control_put - free the reset controller
++ * @rstc: reset controller
++ */
++
++void reset_control_put(struct reset_control *rstc)
++{
++	if (IS_ERR(rstc))
++		return;
++
++	module_put(rstc->rcdev->owner);
++	kfree(rstc);
++}
++EXPORT_SYMBOL_GPL(reset_control_put);
++
++static void devm_reset_control_release(struct device *dev, void *res)
++{
++	reset_control_put(*(struct reset_control **)res);
++}
++
++/**
++ * devm_reset_control_get - resource managed reset_control_get()
++ * @dev: device to be reset by the controller
++ * @id: reset line name
++ *
++ * Managed reset_control_get(). For reset controllers returned from this
++ * function, reset_control_put() is called automatically on driver detach.
++ * See reset_control_get() for more information.
++ */
++struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
++{
++	struct reset_control **ptr, *rstc;
++
++	ptr = devres_alloc(devm_reset_control_release, sizeof(*ptr),
++			   GFP_KERNEL);
++	if (!ptr)
++		return ERR_PTR(-ENOMEM);
++
++	rstc = reset_control_get(dev, id);
++	if (!IS_ERR(rstc)) {
++		*ptr = rstc;
++		devres_add(dev, ptr);
++	} else {
++		devres_free(ptr);
++	}
++
++	return rstc;
++}
++EXPORT_SYMBOL_GPL(devm_reset_control_get);
++
++static int devm_reset_control_match(struct device *dev, void *res, void *data)
++{
++	struct reset_control **rstc = res;
++	if (WARN_ON(!rstc || !*rstc))
++		return 0;
++	return *rstc == data;
++}
++
++/**
++ * devm_reset_control_put - resource managed reset_control_put()
++ * @rstc: reset controller to free
++ *
++ * Deallocate a reset control allocated withd devm_reset_control_get().
++ * This function will not need to be called normally, as devres will take
++ * care of freeing the resource.
++ */
++void devm_reset_control_put(struct reset_control *rstc)
++{
++	int ret;
++
++	ret = devres_release(rstc->dev, devm_reset_control_release,
++			     devm_reset_control_match, rstc);
++	if (ret)
++		WARN_ON(ret);
++}
++EXPORT_SYMBOL_GPL(devm_reset_control_put);
++
++/**
++ * device_reset - find reset controller associated with the device
++ *                and perform reset
++ * @dev: device to be reset by the controller
++ *
++ * Convenience wrapper for reset_control_get() and reset_control_reset().
++ * This is useful for the common case of devices with single, dedicated reset
++ * lines.
++ */
++int device_reset(struct device *dev)
++{
++	struct reset_control *rstc;
++	int ret;
++
++	rstc = reset_control_get(dev, NULL);
++	if (IS_ERR(rstc))
++		return PTR_ERR(rstc);
++
++	ret = reset_control_reset(rstc);
++
++	reset_control_put(rstc);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(device_reset);
+diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
+new file mode 100644
+index 0000000..2f61311
+--- /dev/null
++++ b/include/linux/reset-controller.h
+@@ -0,0 +1,51 @@
++#ifndef _LINUX_RESET_CONTROLLER_H_
++#define _LINUX_RESET_CONTROLLER_H_
++
++#include <linux/list.h>
++
++struct reset_controller_dev;
++
++/**
++ * struct reset_control_ops
++ *
++ * @reset: for self-deasserting resets, does all necessary
++ *         things to reset the device
++ * @assert: manually assert the reset line, if supported
++ * @deassert: manually deassert the reset line, if supported
++ */
++struct reset_control_ops {
++	int (*reset)(struct reset_controller_dev *rcdev, unsigned long id);
++	int (*assert)(struct reset_controller_dev *rcdev, unsigned long id);
++	int (*deassert)(struct reset_controller_dev *rcdev, unsigned long id);
++};
++
++struct module;
++struct device_node;
++
++/**
++ * struct reset_controller_dev - reset controller entity that might
++ *                               provide multiple reset controls
++ * @ops: a pointer to device specific struct reset_control_ops
++ * @owner: kernel module of the reset controller driver
++ * @list: internal list of reset controller devices
++ * @of_node: corresponding device tree node as phandle target
++ * @of_reset_n_cells: number of cells in reset line specifiers
++ * @of_xlate: translation function to translate from specifier as found in the
++ *            device tree to id as given to the reset control ops
++ * @nr_resets: number of reset controls in this reset controller device
++ */
++struct reset_controller_dev {
++	struct reset_control_ops *ops;
++	struct module *owner;
++	struct list_head list;
++	struct device_node *of_node;
++	int of_reset_n_cells;
++	int (*of_xlate)(struct reset_controller_dev *rcdev,
++			const struct of_phandle_args *reset_spec);
++	unsigned int nr_resets;
++};
++
++int reset_controller_register(struct reset_controller_dev *rcdev);
++void reset_controller_unregister(struct reset_controller_dev *rcdev);
++
++#endif
+diff --git a/include/linux/reset.h b/include/linux/reset.h
+new file mode 100644
+index 0000000..6082247
+--- /dev/null
++++ b/include/linux/reset.h
+@@ -0,0 +1,17 @@
++#ifndef _LINUX_RESET_H_
++#define _LINUX_RESET_H_
++
++struct device;
++struct reset_control;
++
++int reset_control_reset(struct reset_control *rstc);
++int reset_control_assert(struct reset_control *rstc);
++int reset_control_deassert(struct reset_control *rstc);
++
++struct reset_control *reset_control_get(struct device *dev, const char *id);
++void reset_control_put(struct reset_control *rstc);
++struct reset_control *devm_reset_control_get(struct device *dev, const char *id);
++
++int device_reset(struct device *dev);
++
++#endif
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0068-reset-MIPS-ralink-add-core-device-reset-wrapper.patch b/target/linux/ramips/patches-3.8/0068-reset-MIPS-ralink-add-core-device-reset-wrapper.patch
new file mode 100644
index 0000000000..29a0991595
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0068-reset-MIPS-ralink-add-core-device-reset-wrapper.patch
@@ -0,0 +1,135 @@
+From 42c26796ae7bcfe0b33a4145de5a392e32bc9bac Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 8 May 2013 22:08:39 +0200
+Subject: [PATCH 68/79] reset: MIPS: ralink: add core/device reset wrapper
+
+Add a helper for reseting different devices ont he SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/Kconfig        |    1 +
+ arch/mips/ralink/of.c    |   59 ++++++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/reset.c |    1 +
+ 3 files changed, 61 insertions(+)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 2498972..ef5272f 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -450,6 +450,7 @@ config RALINK
+ 	select HAVE_MACH_CLKDEV
+ 	select CLKDEV_LOOKUP
+ 	select ARCH_REQUIRE_GPIOLIB
++	select ARCH_HAS_RESET_CONTROLLER
+ 
+ config SGI_IP22
+ 	bool "SGI IP22 (Indy/Indigo2)"
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index 8efb02b..2faf478 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -14,16 +14,22 @@
+ #include <linux/sizes.h>
+ #include <linux/of_fdt.h>
+ #include <linux/kernel.h>
++#include <linux/module.h>
+ #include <linux/bootmem.h>
+ #include <linux/of_platform.h>
+ #include <linux/of_address.h>
++#include <linux/reset-controller.h>
+ 
+ #include <asm/reboot.h>
+ #include <asm/bootinfo.h>
+ #include <asm/addrspace.h>
+ 
++#include <asm/mach-ralink/ralink_regs.h>
++
+ #include "common.h"
+ 
++#define SYSC_REG_RESET_CTRL     0x034
++
+ __iomem void *rt_sysc_membase;
+ __iomem void *rt_memc_membase;
+ 
+@@ -96,6 +102,53 @@ void __init plat_mem_setup(void)
+ 				     soc_info.mem_size_max * SZ_1M);
+ }
+ 
++static int ralink_assert_device(struct reset_controller_dev *rcdev, unsigned long id)
++{
++	u32 val;
++
++	if (id < 8)
++		return -1;
++
++	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
++	val |= BIT(id);
++	rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
++
++	return 0;
++}
++
++static int ralink_deassert_device(struct reset_controller_dev *rcdev, unsigned long id)
++{
++	u32 val;
++
++	if (id < 8)
++		return -1;
++
++	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
++	val &= ~BIT(id);
++	rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
++
++	return 0;
++}
++
++static int ralink_reset_device(struct reset_controller_dev *rcdev, unsigned long id)
++{
++	ralink_assert_device(rcdev, id);
++	return ralink_deassert_device(rcdev, id);
++}
++
++static struct reset_control_ops reset_ops = {
++	.reset = ralink_reset_device,
++	.assert = ralink_assert_device,
++	.deassert = ralink_deassert_device,
++};
++
++static struct reset_controller_dev reset_dev = {
++	.ops			= &reset_ops,
++	.owner			= THIS_MODULE,
++	.nr_resets		= 32,
++	.of_reset_n_cells	= 1,
++};
++
+ static int __init plat_of_setup(void)
+ {
+ 	static struct of_device_id of_ids[3];
+@@ -110,6 +163,12 @@ static int __init plat_of_setup(void)
+ 	if (of_platform_populate(NULL, of_ids, NULL, NULL))
+ 		panic("failed to populate DT\n");
+ 
++	reset_dev.of_node = of_find_compatible_node(NULL, NULL, "ralink,rt2880-reset");
++	if (!reset_dev.of_node)
++		panic("Failed to find reset controller node");
++
++	reset_controller_register(&reset_dev);
++
+ 	ralink_pinmux();
+ 
+ 	return 0;
+diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
+index 22120e5..6c15f4f 100644
+--- a/arch/mips/ralink/reset.c
++++ b/arch/mips/ralink/reset.c
+@@ -10,6 +10,7 @@
+ 
+ #include <linux/pm.h>
+ #include <linux/io.h>
++#include <linux/module.h>
+ 
+ #include <asm/reboot.h>
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0201-owrt-OF-NET-add-of_get_mac_address_mtd.patch b/target/linux/ramips/patches-3.8/0069-NET-add-of_get_mac_address_mtd.patch
index b7c79abebf..6efccf0bb0 100644
--- a/target/linux/ramips/patches-3.8/0201-owrt-OF-NET-add-of_get_mac_address_mtd.patch
+++ b/target/linux/ramips/patches-3.8/0069-NET-add-of_get_mac_address_mtd.patch
@@ -1,7 +1,7 @@
-From 1809af0f73208ec67363347ddf5370e1f08222e8 Mon Sep 17 00:00:00 2001
+From d30d4c01d2b97eed1fc109819b9c8747343ff4d7 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 17 Mar 2013 09:29:15 +0100
-Subject: [PATCH 201/208] owrt: OF: NET: add of_get_mac_address_mtd()
+Subject: [PATCH 69/79] NET: add of_get_mac_address_mtd()
 
 Many embedded devices have information such as mac addresses stored inside mtd
 devices. This patch allows us to add a property inside a node describing a
@@ -14,6 +14,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  include/linux/of_net.h |    1 +
  2 files changed, 38 insertions(+)
 
+diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
+index ffab033..15f4a71 100644
 --- a/drivers/of/of_net.c
 +++ b/drivers/of/of_net.c
 @@ -10,6 +10,7 @@
@@ -24,7 +26,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  /**
   * It maps 'enum phy_interface_t' found in include/linux/phy.h
-@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct de
+@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct device_node *np)
  	return NULL;
  }
  EXPORT_SYMBOL(of_get_mac_address);
@@ -64,6 +66,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	return ret;
 +}
 +EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
+diff --git a/include/linux/of_net.h b/include/linux/of_net.h
+index f474641..9d3304f 100644
 --- a/include/linux/of_net.h
 +++ b/include/linux/of_net.h
 @@ -11,6 +11,7 @@
@@ -74,3 +78,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  #endif
  
  #endif /* __LINUX_OF_NET_H */
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0070-NET-multi-phy-support.patch b/target/linux/ramips/patches-3.8/0070-NET-multi-phy-support.patch
new file mode 100644
index 0000000000..4e8fbdad28
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0070-NET-multi-phy-support.patch
@@ -0,0 +1,61 @@
+From c00adb2a1ac75eaef1e71cd9819636b86eabebd9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 11 May 2013 23:40:19 +0200
+Subject: [PATCH 70/79] NET: multi phy support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/phy/phy.c |    9 ++++++---
+ include/linux/phy.h   |    2 +-
+ 2 files changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
+index ef9ea92..27f9b45 100644
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -800,7 +800,8 @@ void phy_state_machine(struct work_struct *work)
+ 			 * negotiation for now */
+ 			if (!phydev->link) {
+ 				phydev->state = PHY_NOLINK;
+-				netif_carrier_off(phydev->attached_dev);
++				if (!phydev->no_auto_carrier_off)
++					netif_carrier_off(phydev->attached_dev);
+ 				phydev->adjust_link(phydev->attached_dev);
+ 				break;
+ 			}
+@@ -891,7 +892,8 @@ void phy_state_machine(struct work_struct *work)
+ 				netif_carrier_on(phydev->attached_dev);
+ 			} else {
+ 				phydev->state = PHY_NOLINK;
+-				netif_carrier_off(phydev->attached_dev);
++				if (!phydev->no_auto_carrier_off)
++					netif_carrier_off(phydev->attached_dev);
+ 			}
+ 
+ 			phydev->adjust_link(phydev->attached_dev);
+@@ -903,7 +905,8 @@ void phy_state_machine(struct work_struct *work)
+ 		case PHY_HALTED:
+ 			if (phydev->link) {
+ 				phydev->link = 0;
+-				netif_carrier_off(phydev->attached_dev);
++				if (!phydev->no_auto_carrier_off)
++					netif_carrier_off(phydev->attached_dev);
+ 				phydev->adjust_link(phydev->attached_dev);
+ 			}
+ 			break;
+diff --git a/include/linux/phy.h b/include/linux/phy.h
+index 93b3cf7..c09b4ad 100644
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -298,7 +298,7 @@ struct phy_device {
+ 
+ 	struct phy_c45_device_ids c45_ids;
+ 	bool is_c45;
+-
++	bool no_auto_carrier_off;
+ 	enum phy_state state;
+ 
+ 	u32 dev_flags;
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0072-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-3.8/0072-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
new file mode 100644
index 0000000000..5e35b5be40
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0072-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
@@ -0,0 +1,4732 @@
+From 34564578e57bd2bffddbd5f463c55db4a220f2a0 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 20 Jun 2013 18:52:00 +0200
+Subject: [PATCH 72/79] NET: MIPS: add ralink SoC ethernet driver
+
+Add support for Ralink FE and ESW.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../include/asm/mach-ralink/rt305x_esw_platform.h  |   27 +
+ arch/mips/ralink/rt305x.c                          |    1 +
+ drivers/net/ethernet/Kconfig                       |    1 +
+ drivers/net/ethernet/Makefile                      |    1 +
+ drivers/net/ethernet/ralink/Kconfig                |   31 +
+ drivers/net/ethernet/ralink/Makefile               |   18 +
+ drivers/net/ethernet/ralink/esw_rt3052.c           | 1463 ++++++++++++++++++++
+ drivers/net/ethernet/ralink/esw_rt3052.h           |   32 +
+ drivers/net/ethernet/ralink/gsw_mt7620a.c          | 1027 ++++++++++++++
+ drivers/net/ethernet/ralink/gsw_mt7620a.h          |   29 +
+ drivers/net/ethernet/ralink/mdio.c                 |  245 ++++
+ drivers/net/ethernet/ralink/mdio.h                 |   29 +
+ drivers/net/ethernet/ralink/mdio_rt2880.c          |  163 +++
+ drivers/net/ethernet/ralink/mdio_rt2880.h          |   25 +
+ drivers/net/ethernet/ralink/ralink_soc_eth.c       |  759 ++++++++++
+ drivers/net/ethernet/ralink/ralink_soc_eth.h       |  372 +++++
+ drivers/net/ethernet/ralink/soc_mt7620.c           |  111 ++
+ drivers/net/ethernet/ralink/soc_rt2880.c           |   51 +
+ drivers/net/ethernet/ralink/soc_rt305x.c           |  102 ++
+ drivers/net/ethernet/ralink/soc_rt3883.c           |   59 +
+ 20 files changed, 4546 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+ create mode 100644 drivers/net/ethernet/ralink/Kconfig
+ create mode 100644 drivers/net/ethernet/ralink/Makefile
+ create mode 100644 drivers/net/ethernet/ralink/esw_rt3052.c
+ create mode 100644 drivers/net/ethernet/ralink/esw_rt3052.h
+ create mode 100644 drivers/net/ethernet/ralink/gsw_mt7620a.c
+ create mode 100644 drivers/net/ethernet/ralink/gsw_mt7620a.h
+ create mode 100644 drivers/net/ethernet/ralink/mdio.c
+ create mode 100644 drivers/net/ethernet/ralink/mdio.h
+ create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.c
+ create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.h
+ create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.c
+ create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.h
+ create mode 100644 drivers/net/ethernet/ralink/soc_mt7620.c
+ create mode 100644 drivers/net/ethernet/ralink/soc_rt2880.c
+ create mode 100644 drivers/net/ethernet/ralink/soc_rt305x.c
+ create mode 100644 drivers/net/ethernet/ralink/soc_rt3883.c
+
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+new file mode 100644
+index 0000000..2098c5c
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+@@ -0,0 +1,27 @@
++/*
++ *  Ralink RT305x SoC platform device registration
++ *
++ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef _RT305X_ESW_PLATFORM_H
++#define _RT305X_ESW_PLATFORM_H
++
++enum {
++	RT305X_ESW_VLAN_CONFIG_NONE = 0,
++	RT305X_ESW_VLAN_CONFIG_LLLLW,
++	RT305X_ESW_VLAN_CONFIG_WLLLL,
++};
++
++struct rt305x_esw_platform_data
++{
++	u8 vlan_config;
++	u32 reg_initval_fct2;
++	u32 reg_initval_fpa2;
++};
++
++#endif /* _RT305X_ESW_PLATFORM_H */
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index ca7ee3a..1a6b458 100644
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -221,6 +221,7 @@ void __init ralink_clk_init(void)
+ 	}
+ 
+ 	ralink_clk_add("cpu", cpu_rate);
++	ralink_clk_add("sys", sys_rate);
+ 	ralink_clk_add("10000b00.spi", sys_rate);
+ 	ralink_clk_add("10000100.timer", wdt_rate);
+ 	ralink_clk_add("10000120.watchdog", wdt_rate);
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index e4ff389..08c3c93 100644
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -137,6 +137,7 @@ source "drivers/net/ethernet/pasemi/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
+ source "drivers/net/ethernet/racal/Kconfig"
+ source "drivers/net/ethernet/realtek/Kconfig"
++source "drivers/net/ethernet/ralink/Kconfig"
+ source "drivers/net/ethernet/renesas/Kconfig"
+ source "drivers/net/ethernet/rdc/Kconfig"
+ 
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index d447307..f6bffb1 100644
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -55,6 +55,7 @@ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
++obj-$(CONFIG_NET_RALINK) += ralink/
+ obj-$(CONFIG_SH_ETH) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
+ obj-$(CONFIG_S6GMAC) += s6gmac.o
+diff --git a/drivers/net/ethernet/ralink/Kconfig b/drivers/net/ethernet/ralink/Kconfig
+new file mode 100644
+index 0000000..ca2c9ad
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/Kconfig
+@@ -0,0 +1,31 @@
++config NET_RALINK
++	tristate "Ralink RT288X/RT3X5X/RT3662/RT3883/MT7620 ethernet driver"
++	depends on RALINK
++	help
++	  This driver supports the ethernet mac inside the ralink wisocs
++
++if NET_RALINK
++
++config NET_RALINK_MDIO
++	def_bool NET_RALINK
++	depends on (SOC_RT288X || SOC_RT3883 || SOC_MT7620)
++	select PHYLIB
++
++config NET_RALINK_MDIO_RT2880
++	def_bool NET_RALINK
++	depends on (SOC_RT288X || SOC_RT3883)
++	select NET_RALINK_MDIO
++
++config NET_RALINK_ESW_RT3052
++	def_bool NET_RALINK
++	depends on SOC_RT305X
++	select PHYLIB
++	select SWCONFIG
++
++config NET_RALINK_GSW_MT7620
++	def_bool NET_RALINK
++	depends on SOC_MT7620
++	select NET_RALINK_MDIO
++	select PHYLIB
++	select SWCONFIG
++endif
+diff --git a/drivers/net/ethernet/ralink/Makefile b/drivers/net/ethernet/ralink/Makefile
+new file mode 100644
+index 0000000..a38fa21
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/Makefile
+@@ -0,0 +1,18 @@
++#
++# Makefile for the Ralink SoCs built-in ethernet macs
++#
++
++ralink-eth-y					+= ralink_soc_eth.o
++
++ralink-eth-$(CONFIG_NET_RALINK_MDIO)		+= mdio.o
++ralink-eth-$(CONFIG_NET_RALINK_MDIO_RT2880)	+= mdio_rt2880.o
++
++ralink-eth-$(CONFIG_NET_RALINK_ESW_RT3052)	+= esw_rt3052.o
++ralink-eth-$(CONFIG_NET_RALINK_GSW_MT7620)	+= gsw_mt7620a.o
++
++ralink-eth-$(CONFIG_SOC_RT288X)			+= soc_rt2880.o
++ralink-eth-$(CONFIG_SOC_RT305X)			+= soc_rt305x.o
++ralink-eth-$(CONFIG_SOC_RT3883)			+= soc_rt3883.o
++ralink-eth-$(CONFIG_SOC_MT7620)			+= soc_mt7620.o
++
++obj-$(CONFIG_NET_RALINK)			+= ralink-eth.o
+diff --git a/drivers/net/ethernet/ralink/esw_rt3052.c b/drivers/net/ethernet/ralink/esw_rt3052.c
+new file mode 100644
+index 0000000..b937062
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/esw_rt3052.c
+@@ -0,0 +1,1463 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++
++#include <linux/ioport.h>
++#include <linux/switch.h>
++#include <linux/mii.h>
++
++#include <ralink_regs.h>
++#include <asm/mach-ralink/rt305x.h>
++#include <asm/mach-ralink/rt305x_esw_platform.h>
++
++/*
++ * HW limitations for this switch:
++ * - No large frame support (PKT_MAX_LEN at most 1536)
++ * - Can't have untagged vlan and tagged vlan on one port at the same time,
++ *   though this might be possible using the undocumented PPE.
++ */
++
++#define RT305X_ESW_REG_ISR		0x00
++#define RT305X_ESW_REG_IMR		0x04
++#define RT305X_ESW_REG_FCT0		0x08
++#define RT305X_ESW_REG_PFC1		0x14
++#define RT305X_ESW_REG_ATS		0x24
++#define RT305X_ESW_REG_ATS0		0x28
++#define RT305X_ESW_REG_ATS1		0x2c
++#define RT305X_ESW_REG_ATS2		0x30
++#define RT305X_ESW_REG_PVIDC(_n)	(0x40 + 4 * (_n))
++#define RT305X_ESW_REG_VLANI(_n)	(0x50 + 4 * (_n))
++#define RT305X_ESW_REG_VMSC(_n)		(0x70 + 4 * (_n))
++#define RT305X_ESW_REG_POA		0x80
++#define RT305X_ESW_REG_FPA		0x84
++#define RT305X_ESW_REG_SOCPC		0x8c
++#define RT305X_ESW_REG_POC0		0x90
++#define RT305X_ESW_REG_POC1		0x94
++#define RT305X_ESW_REG_POC2		0x98
++#define RT305X_ESW_REG_SGC		0x9c
++#define RT305X_ESW_REG_STRT		0xa0
++#define RT305X_ESW_REG_PCR0		0xc0
++#define RT305X_ESW_REG_PCR1		0xc4
++#define RT305X_ESW_REG_FPA2		0xc8
++#define RT305X_ESW_REG_FCT2		0xcc
++#define RT305X_ESW_REG_SGC2		0xe4
++#define RT305X_ESW_REG_P0LED		0xa4
++#define RT305X_ESW_REG_P1LED		0xa8
++#define RT305X_ESW_REG_P2LED		0xac
++#define RT305X_ESW_REG_P3LED		0xb0
++#define RT305X_ESW_REG_P4LED		0xb4
++#define RT305X_ESW_REG_PXPC(_x)		(0xe8 + (4 * _x))
++#define RT305X_ESW_REG_P1PC		0xec
++#define RT305X_ESW_REG_P2PC		0xf0
++#define RT305X_ESW_REG_P3PC		0xf4
++#define RT305X_ESW_REG_P4PC		0xf8
++#define RT305X_ESW_REG_P5PC		0xfc
++
++#define RT305X_ESW_LED_LINK		0
++#define RT305X_ESW_LED_100M		1
++#define RT305X_ESW_LED_DUPLEX		2
++#define RT305X_ESW_LED_ACTIVITY		3
++#define RT305X_ESW_LED_COLLISION	4
++#define RT305X_ESW_LED_LINKACT		5
++#define RT305X_ESW_LED_DUPLCOLL		6
++#define RT305X_ESW_LED_10MACT		7
++#define RT305X_ESW_LED_100MACT		8
++/* Additional led states not in datasheet: */
++#define RT305X_ESW_LED_BLINK		10
++#define RT305X_ESW_LED_ON		12
++
++#define RT305X_ESW_LINK_S		25
++#define RT305X_ESW_DUPLEX_S		9
++#define RT305X_ESW_SPD_S		0
++
++#define RT305X_ESW_PCR0_WT_NWAY_DATA_S	16
++#define RT305X_ESW_PCR0_WT_PHY_CMD	BIT(13)
++#define RT305X_ESW_PCR0_CPU_PHY_REG_S	8
++
++#define RT305X_ESW_PCR1_WT_DONE		BIT(0)
++
++#define RT305X_ESW_ATS_TIMEOUT		(5 * HZ)
++#define RT305X_ESW_PHY_TIMEOUT		(5 * HZ)
++
++#define RT305X_ESW_PVIDC_PVID_M		0xfff
++#define RT305X_ESW_PVIDC_PVID_S		12
++
++#define RT305X_ESW_VLANI_VID_M		0xfff
++#define RT305X_ESW_VLANI_VID_S		12
++
++#define RT305X_ESW_VMSC_MSC_M		0xff
++#define RT305X_ESW_VMSC_MSC_S		8
++
++#define RT305X_ESW_SOCPC_DISUN2CPU_S	0
++#define RT305X_ESW_SOCPC_DISMC2CPU_S	8
++#define RT305X_ESW_SOCPC_DISBC2CPU_S	16
++#define RT305X_ESW_SOCPC_CRC_PADDING	BIT(25)
++
++#define RT305X_ESW_POC0_EN_BP_S		0
++#define RT305X_ESW_POC0_EN_FC_S		8
++#define RT305X_ESW_POC0_DIS_RMC2CPU_S	16
++#define RT305X_ESW_POC0_DIS_PORT_M	0x7f
++#define RT305X_ESW_POC0_DIS_PORT_S	23
++
++#define RT305X_ESW_POC2_UNTAG_EN_M	0xff
++#define RT305X_ESW_POC2_UNTAG_EN_S	0
++#define RT305X_ESW_POC2_ENAGING_S	8
++#define RT305X_ESW_POC2_DIS_UC_PAUSE_S	16
++
++#define RT305X_ESW_SGC2_DOUBLE_TAG_M	0x7f
++#define RT305X_ESW_SGC2_DOUBLE_TAG_S	0
++#define RT305X_ESW_SGC2_LAN_PMAP_M	0x3f
++#define RT305X_ESW_SGC2_LAN_PMAP_S	24
++
++#define RT305X_ESW_PFC1_EN_VLAN_M	0xff
++#define RT305X_ESW_PFC1_EN_VLAN_S	16
++#define RT305X_ESW_PFC1_EN_TOS_S	24
++
++#define RT305X_ESW_VLAN_NONE		0xfff
++
++#define RT305X_ESW_GSC_BC_STROM_MASK	0x3
++#define RT305X_ESW_GSC_BC_STROM_SHIFT	4
++
++#define RT305X_ESW_GSC_LED_FREQ_MASK	0x3
++#define RT305X_ESW_GSC_LED_FREQ_SHIFT	23
++
++#define RT305X_ESW_POA_LINK_MASK	0x1f
++#define RT305X_ESW_POA_LINK_SHIFT	25
++
++#define RT305X_ESW_PORT_ST_CHG		BIT(26)
++#define RT305X_ESW_PORT0		0
++#define RT305X_ESW_PORT1		1
++#define RT305X_ESW_PORT2		2
++#define RT305X_ESW_PORT3		3
++#define RT305X_ESW_PORT4		4
++#define RT305X_ESW_PORT5		5
++#define RT305X_ESW_PORT6		6
++
++#define RT305X_ESW_PORTS_NONE		0
++
++#define RT305X_ESW_PMAP_LLLLLL		0x3f
++#define RT305X_ESW_PMAP_LLLLWL		0x2f
++#define RT305X_ESW_PMAP_WLLLLL		0x3e
++
++#define RT305X_ESW_PORTS_INTERNAL					\
++		(BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) |	\
++		 BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) |	\
++		 BIT(RT305X_ESW_PORT4))
++
++#define RT305X_ESW_PORTS_NOCPU						\
++		(RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
++
++#define RT305X_ESW_PORTS_CPU	BIT(RT305X_ESW_PORT6)
++
++#define RT305X_ESW_PORTS_ALL						\
++		(RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
++
++#define RT305X_ESW_NUM_VLANS		16
++#define RT305X_ESW_NUM_VIDS		4096
++#define RT305X_ESW_NUM_PORTS		7
++#define RT305X_ESW_NUM_LANWAN		6
++#define RT305X_ESW_NUM_LEDS		5
++
++#define RT5350_ESW_REG_PXTPC(_x)	(0x150 + (4 * _x))
++#define RT5350_EWS_REG_LED_POLARITY	0x168
++#define RT5350_RESET_EPHY		BIT(24)
++#define SYSC_REG_RESET_CTRL		0x34
++
++enum {
++	/* Global attributes. */
++	RT305X_ESW_ATTR_ENABLE_VLAN,
++	RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
++	RT305X_ESW_ATTR_BC_STATUS,
++	RT305X_ESW_ATTR_LED_FREQ,
++	/* Port attributes. */
++	RT305X_ESW_ATTR_PORT_DISABLE,
++	RT305X_ESW_ATTR_PORT_DOUBLETAG,
++	RT305X_ESW_ATTR_PORT_UNTAG,
++	RT305X_ESW_ATTR_PORT_LED,
++	RT305X_ESW_ATTR_PORT_LAN,
++	RT305X_ESW_ATTR_PORT_RECV_BAD,
++	RT305X_ESW_ATTR_PORT_RECV_GOOD,
++	RT5350_ESW_ATTR_PORT_TR_BAD,
++	RT5350_ESW_ATTR_PORT_TR_GOOD,
++};
++
++struct esw_port {
++	bool	disable;
++	bool	doubletag;
++	bool	untag;
++	u8	led;
++	u16	pvid;
++};
++
++struct esw_vlan {
++	u8	ports;
++	u16	vid;
++};
++
++struct rt305x_esw {
++	struct device		*dev;
++	void __iomem		*base;
++	int			irq;
++	const struct rt305x_esw_platform_data *pdata;
++	/* Protects against concurrent register rmw operations. */
++	spinlock_t		reg_rw_lock;
++
++	unsigned char		port_map;
++	unsigned int		reg_initval_fct2;
++	unsigned int		reg_initval_fpa2;
++	unsigned int		reg_led_polarity;
++
++
++	struct switch_dev	swdev;
++	bool			global_vlan_enable;
++	bool			alt_vlan_disable;
++	int			bc_storm_protect;
++	int			led_frequency;
++	struct esw_vlan vlans[RT305X_ESW_NUM_VLANS];
++	struct esw_port ports[RT305X_ESW_NUM_PORTS];
++
++};
++
++static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg)
++{
++	__raw_writel(val, esw->base + reg);
++}
++
++static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg)
++{
++	return __raw_readl(esw->base + reg);
++}
++
++static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
++		   unsigned long val)
++{
++	unsigned long t;
++
++	t = __raw_readl(esw->base + reg) & ~mask;
++	__raw_writel(t | val, esw->base + reg);
++}
++
++static void esw_rmw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
++	       unsigned long val)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&esw->reg_rw_lock, flags);
++	esw_rmw_raw(esw, reg, mask, val);
++	spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
++}
++
++static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr, u32 phy_register,
++		 u32 write_data)
++{
++	unsigned long t_start = jiffies;
++	int ret = 0;
++
++	while (1) {
++		if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) &
++		      RT305X_ESW_PCR1_WT_DONE))
++			break;
++		if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
++			ret = 1;
++			goto out;
++		}
++	}
++
++	write_data &= 0xffff;
++	esw_w32(esw,
++		      (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
++		      (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
++		      (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
++		      RT305X_ESW_REG_PCR0);
++
++	t_start = jiffies;
++	while (1) {
++		if (esw_r32(esw, RT305X_ESW_REG_PCR1) &
++		    RT305X_ESW_PCR1_WT_DONE)
++			break;
++
++		if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
++			ret = 1;
++			break;
++		}
++	}
++out:
++	if (ret)
++		printk(KERN_ERR "ramips_eth: MDIO timeout\n");
++	return ret;
++}
++
++static unsigned esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan)
++{
++	unsigned s;
++	unsigned val;
++
++	s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
++	val = esw_r32(esw, RT305X_ESW_REG_VLANI(vlan / 2));
++	val = (val >> s) & RT305X_ESW_VLANI_VID_M;
++
++	return val;
++}
++
++static void esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid)
++{
++	unsigned s;
++
++	s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
++	esw_rmw(esw,
++		       RT305X_ESW_REG_VLANI(vlan / 2),
++		       RT305X_ESW_VLANI_VID_M << s,
++		       (vid & RT305X_ESW_VLANI_VID_M) << s);
++}
++
++static unsigned esw_get_pvid(struct rt305x_esw *esw, unsigned port)
++{
++	unsigned s, val;
++
++	s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
++	val = esw_r32(esw, RT305X_ESW_REG_PVIDC(port / 2));
++	return (val >> s) & RT305X_ESW_PVIDC_PVID_M;
++}
++
++static void esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid)
++{
++	unsigned s;
++
++	s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
++	esw_rmw(esw,
++		       RT305X_ESW_REG_PVIDC(port / 2),
++		       RT305X_ESW_PVIDC_PVID_M << s,
++		       (pvid & RT305X_ESW_PVIDC_PVID_M) << s);
++}
++
++static unsigned esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan)
++{
++	unsigned s, val;
++
++	s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
++	val = esw_r32(esw, RT305X_ESW_REG_VMSC(vlan / 4));
++	val = (val >> s) & RT305X_ESW_VMSC_MSC_M;
++
++	return val;
++}
++
++static void esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc)
++{
++	unsigned s;
++
++	s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
++	esw_rmw(esw,
++		       RT305X_ESW_REG_VMSC(vlan / 4),
++		       RT305X_ESW_VMSC_MSC_M << s,
++		       (msc & RT305X_ESW_VMSC_MSC_M) << s);
++}
++
++static unsigned esw_get_port_disable(struct rt305x_esw *esw)
++{
++	unsigned reg;
++	reg = esw_r32(esw, RT305X_ESW_REG_POC0);
++	return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
++	       RT305X_ESW_POC0_DIS_PORT_M;
++}
++
++static void esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask)
++{
++	unsigned old_mask;
++	unsigned enable_mask;
++	unsigned changed;
++	int i;
++
++	old_mask = esw_get_port_disable(esw);
++	changed = old_mask ^ disable_mask;
++	enable_mask = old_mask & disable_mask;
++
++	/* enable before writing to MII */
++	esw_rmw(esw, RT305X_ESW_REG_POC0,
++		       (RT305X_ESW_POC0_DIS_PORT_M <<
++			RT305X_ESW_POC0_DIS_PORT_S),
++		       enable_mask << RT305X_ESW_POC0_DIS_PORT_S);
++
++	for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) {
++		if (!(changed & (1 << i)))
++			continue;
++		if (disable_mask & (1 << i)) {
++			/* disable */
++			rt305x_mii_write(esw, i, MII_BMCR,
++					 BMCR_PDOWN);
++		} else {
++			/* enable */
++			rt305x_mii_write(esw, i, MII_BMCR,
++					 BMCR_FULLDPLX |
++					 BMCR_ANENABLE |
++					 BMCR_ANRESTART |
++					 BMCR_SPEED100);
++		}
++	}
++
++	/* disable after writing to MII */
++	esw_rmw(esw, RT305X_ESW_REG_POC0,
++		       (RT305X_ESW_POC0_DIS_PORT_M <<
++			RT305X_ESW_POC0_DIS_PORT_S),
++		       disable_mask << RT305X_ESW_POC0_DIS_PORT_S);
++}
++
++static void esw_set_gsc(struct rt305x_esw *esw)
++{
++	esw_rmw(esw, RT305X_ESW_REG_SGC,
++		RT305X_ESW_GSC_BC_STROM_MASK << RT305X_ESW_GSC_BC_STROM_SHIFT,
++		esw->bc_storm_protect << RT305X_ESW_GSC_BC_STROM_SHIFT);
++	esw_rmw(esw, RT305X_ESW_REG_SGC,
++		RT305X_ESW_GSC_LED_FREQ_MASK << RT305X_ESW_GSC_LED_FREQ_SHIFT,
++		esw->led_frequency << RT305X_ESW_GSC_LED_FREQ_SHIFT);
++}
++
++static int esw_apply_config(struct switch_dev *dev);
++
++static void esw_hw_init(struct rt305x_esw *esw)
++{
++	int i;
++	u8 port_disable = 0;
++	u8 port_map = RT305X_ESW_PMAP_LLLLLL;
++
++	/* vodoo from original driver */
++	esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
++	esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);
++	/* Port priority 1 for all ports, vlan enabled. */
++	esw_w32(esw, 0x00005555 |
++		      (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
++		      RT305X_ESW_REG_PFC1);
++
++	/* Enable Back Pressure, and Flow Control */
++	esw_w32(esw,
++		      ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
++		       (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
++		      RT305X_ESW_REG_POC0);
++
++	/* Enable Aging, and VLAN TAG removal */
++	esw_w32(esw,
++		      ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
++		       (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
++		      RT305X_ESW_REG_POC2);
++
++	if (esw->reg_initval_fct2)
++		esw_w32(esw, esw->reg_initval_fct2, RT305X_ESW_REG_FCT2);
++	else
++		esw_w32(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2);
++
++	/*
++	 * 300s aging timer, max packet len 1536, broadcast storm prevention
++	 * disabled, disable collision abort, mac xor48 hash, 10 packet back
++	 * pressure jam, GMII disable was_transmit, back pressure disabled,
++	 * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
++	 * ports.
++	 */
++	esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC);
++
++	/* Setup SoC Port control register */
++	esw_w32(esw,
++		      (RT305X_ESW_SOCPC_CRC_PADDING |
++		       (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
++		       (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
++		       (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
++		      RT305X_ESW_REG_SOCPC);
++
++	if (esw->reg_initval_fpa2)
++		esw_w32(esw, esw->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
++	else
++		esw_w32(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
++	esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA);
++
++	/* Force Link/Activity on ports */
++	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED);
++	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED);
++	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED);
++	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
++	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
++
++	/* Copy disabled port configuration from bootloader setup */
++	port_disable = esw_get_port_disable(esw);
++	for (i = 0; i < 6; i++)
++		esw->ports[i].disable = (port_disable & (1 << i)) != 0;
++
++	if (soc_is_rt3352()) {
++		/* reset EPHY */
++		u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
++		rt_sysc_w32(val | RT5350_RESET_EPHY, SYSC_REG_RESET_CTRL);
++		rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
++
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++		for (i = 0; i < 5; i++) {
++			if (esw->ports[i].disable) {
++				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++			} else {
++				rt305x_mii_write(esw, i, MII_BMCR,
++					 BMCR_FULLDPLX |
++					 BMCR_ANENABLE |
++					 BMCR_SPEED100);
++			}
++			/* TX10 waveform coefficient LSB=0 disable PHY */
++			rt305x_mii_write(esw, i, 26, 0x1601);
++			/* TX100/TX10 AD/DA current bias */
++			rt305x_mii_write(esw, i, 29, 0x7016);
++			/* TX100 slew rate control */
++			rt305x_mii_write(esw, i, 30, 0x0038);
++		}
++
++		/* select global register */
++		rt305x_mii_write(esw, 0, 31, 0x0);
++		/* enlarge agcsel threshold 3 and threshold 2 */
++		rt305x_mii_write(esw, 0, 1, 0x4a40);
++		/* enlarge agcsel threshold 5 and threshold 4 */
++		rt305x_mii_write(esw, 0, 2, 0x6254);
++		/* enlarge agcsel threshold  */
++		rt305x_mii_write(esw, 0, 3, 0xa17f);
++		rt305x_mii_write(esw, 0,12, 0x7eaa);
++		/* longer TP_IDL tail length */
++		rt305x_mii_write(esw, 0, 14, 0x65);
++		/* increased squelch pulse count threshold. */
++		rt305x_mii_write(esw, 0, 16, 0x0684);
++		/* set TX10 signal amplitude threshold to minimum */
++		rt305x_mii_write(esw, 0, 17, 0x0fe0);
++		/* set squelch amplitude to higher threshold */
++		rt305x_mii_write(esw, 0, 18, 0x40ba);
++		/* tune TP_IDL tail and head waveform, enable power down slew rate control */
++		rt305x_mii_write(esw, 0, 22, 0x253f);
++		/* set PLL/Receive bias current are calibrated */
++		rt305x_mii_write(esw, 0, 27, 0x2fda);
++		/* change PLL/Receive bias current to internal(RT3350) */
++		rt305x_mii_write(esw, 0, 28, 0xc410);
++		/* change PLL bias current to internal(RT3052_MP3) */
++		rt305x_mii_write(esw, 0, 29, 0x598b);
++		/* select local register */
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++	} else if (soc_is_rt5350()) {
++		/* reset EPHY */
++		u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
++		rt_sysc_w32(val | RT5350_RESET_EPHY, SYSC_REG_RESET_CTRL);
++		rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
++
++		/* set the led polarity */
++		esw_w32(esw, esw->reg_led_polarity & 0x1F, RT5350_EWS_REG_LED_POLARITY);
++
++		/* local registers */
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++		for (i = 0; i < 5; i++) {
++			if (esw->ports[i].disable) {
++				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++			} else {
++				rt305x_mii_write(esw, i, MII_BMCR,
++					 BMCR_FULLDPLX |
++					 BMCR_ANENABLE |
++					 BMCR_SPEED100);
++			}
++			/* TX10 waveform coefficient LSB=0 disable PHY */
++			rt305x_mii_write(esw, i, 26, 0x1601);
++			/* TX100/TX10 AD/DA current bias */
++			rt305x_mii_write(esw, i, 29, 0x7015);
++			/* TX100 slew rate control */
++			rt305x_mii_write(esw, i, 30, 0x0038);
++		}
++
++		/* global registers */
++		rt305x_mii_write(esw, 0, 31, 0x0);
++		/* enlarge agcsel threshold 3 and threshold 2 */
++		rt305x_mii_write(esw, 0, 1, 0x4a40);
++		/* enlarge agcsel threshold 5 and threshold 4 */
++		rt305x_mii_write(esw, 0, 2, 0x6254);
++		/* enlarge agcsel threshold 6 */
++		rt305x_mii_write(esw, 0, 3, 0xa17f);
++		rt305x_mii_write(esw, 0, 12, 0x7eaa);
++		/* longer TP_IDL tail length */
++		rt305x_mii_write(esw, 0, 14, 0x65);
++		/* increased squelch pulse count threshold. */
++		rt305x_mii_write(esw, 0, 16, 0x0684);
++		/* set TX10 signal amplitude threshold to minimum */
++		rt305x_mii_write(esw, 0, 17, 0x0fe0);
++		/* set squelch amplitude to higher threshold */
++		rt305x_mii_write(esw, 0, 18, 0x40ba);
++		/* tune TP_IDL tail and head waveform, enable power down slew rate control */
++		rt305x_mii_write(esw, 0, 22, 0x253f);
++		/* set PLL/Receive bias current are calibrated */
++		rt305x_mii_write(esw, 0, 27, 0x2fda);
++		/* change PLL/Receive bias current to internal(RT3350) */
++		rt305x_mii_write(esw, 0, 28, 0xc410);
++		/* change PLL bias current to internal(RT3052_MP3) */
++		rt305x_mii_write(esw, 0, 29, 0x598b);
++		/* select local register */
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++	} else {
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++		for (i = 0; i < 5; i++) {
++			if (esw->ports[i].disable) {
++				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++			} else {
++				rt305x_mii_write(esw, i, MII_BMCR,
++					 BMCR_FULLDPLX |
++					 BMCR_ANENABLE |
++					 BMCR_SPEED100);
++			}
++			/* TX10 waveform coefficient */
++			rt305x_mii_write(esw, i, 26, 0x1601);
++			/* TX100/TX10 AD/DA current bias */
++			rt305x_mii_write(esw, i, 29, 0x7058);
++			/* TX100 slew rate control */
++			rt305x_mii_write(esw, i, 30, 0x0018);
++		}
++
++		/* PHY IOT */
++		/* select global register */
++		rt305x_mii_write(esw, 0, 31, 0x0);
++		/* tune TP_IDL tail and head waveform */
++		rt305x_mii_write(esw, 0, 22, 0x052f);
++		/* set TX10 signal amplitude threshold to minimum */
++		rt305x_mii_write(esw, 0, 17, 0x0fe0);
++		/* set squelch amplitude to higher threshold */
++		rt305x_mii_write(esw, 0, 18, 0x40ba);
++		/* longer TP_IDL tail length */
++		rt305x_mii_write(esw, 0, 14, 0x65);
++		/* select local register */
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++	}
++
++	if (esw->port_map)
++		port_map = esw->port_map;
++	else
++		port_map = RT305X_ESW_PMAP_LLLLLL;
++
++	/*
++	 * Unused HW feature, but still nice to be consistent here...
++	 * This is also exported to userspace ('lan' attribute) so it's
++	 * conveniently usable to decide which ports go into the wan vlan by
++	 * default.
++	 */
++	esw_rmw(esw, RT305X_ESW_REG_SGC2,
++		       RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
++		       port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
++
++	/* make the switch leds blink */
++	for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
++		esw->ports[i].led = 0x05;
++
++	/* Apply the empty config. */
++	esw_apply_config(&esw->swdev);
++
++	/* Only unmask the port change interrupt */
++	esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
++}
++
++static irqreturn_t esw_interrupt(int irq, void *_esw)
++{
++	struct rt305x_esw *esw = (struct rt305x_esw *) _esw;
++	u32 status;
++
++	status = esw_r32(esw, RT305X_ESW_REG_ISR);
++	if (status & RT305X_ESW_PORT_ST_CHG) {
++		u32 link = esw_r32(esw, RT305X_ESW_REG_POA);
++		link >>= RT305X_ESW_POA_LINK_SHIFT;
++		link &= RT305X_ESW_POA_LINK_MASK;
++		dev_info(esw->dev, "link changed 0x%02X\n", link);
++	}
++	esw_w32(esw, status, RT305X_ESW_REG_ISR);
++
++	return IRQ_HANDLED;
++}
++
++static int esw_apply_config(struct switch_dev *dev)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int i;
++	u8 disable = 0;
++	u8 doubletag = 0;
++	u8 en_vlan = 0;
++	u8 untag = 0;
++
++	for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++		u32 vid, vmsc;
++		if (esw->global_vlan_enable) {
++			vid = esw->vlans[i].vid;
++			vmsc = esw->vlans[i].ports;
++		} else {
++			vid = RT305X_ESW_VLAN_NONE;
++			vmsc = RT305X_ESW_PORTS_NONE;
++		}
++		esw_set_vlan_id(esw, i, vid);
++		esw_set_vmsc(esw, i, vmsc);
++	}
++
++	for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
++		u32 pvid;
++		disable |= esw->ports[i].disable << i;
++		if (esw->global_vlan_enable) {
++			doubletag |= esw->ports[i].doubletag << i;
++			en_vlan   |= 1                       << i;
++			untag     |= esw->ports[i].untag     << i;
++			pvid       = esw->ports[i].pvid;
++		} else {
++			int x = esw->alt_vlan_disable ? 0 : 1;
++			doubletag |= x << i;
++			en_vlan   |= x << i;
++			untag     |= x << i;
++			pvid       = 0;
++		}
++		esw_set_pvid(esw, i, pvid);
++		if (i < RT305X_ESW_NUM_LEDS)
++			esw_w32(esw, esw->ports[i].led,
++				      RT305X_ESW_REG_P0LED + 4*i);
++	}
++
++	esw_set_gsc(esw);
++	esw_set_port_disable(esw, disable);
++	esw_rmw(esw, RT305X_ESW_REG_SGC2,
++		       (RT305X_ESW_SGC2_DOUBLE_TAG_M <<
++			RT305X_ESW_SGC2_DOUBLE_TAG_S),
++		       doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S);
++	esw_rmw(esw, RT305X_ESW_REG_PFC1,
++		       RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S,
++		       en_vlan << RT305X_ESW_PFC1_EN_VLAN_S);
++	esw_rmw(esw, RT305X_ESW_REG_POC2,
++		       RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S,
++		       untag << RT305X_ESW_POC2_UNTAG_EN_S);
++
++	if (!esw->global_vlan_enable) {
++		/*
++		 * Still need to put all ports into vlan 0 or they'll be
++		 * isolated.
++		 * NOTE: vlan 0 is special, no vlan tag is prepended
++		 */
++		esw_set_vlan_id(esw, 0, 0);
++		esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL);
++	}
++
++	return 0;
++}
++
++static int esw_reset_switch(struct switch_dev *dev)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	esw->global_vlan_enable = 0;
++	memset(esw->ports, 0, sizeof(esw->ports));
++	memset(esw->vlans, 0, sizeof(esw->vlans));
++	esw_hw_init(esw);
++
++	return 0;
++}
++
++static int esw_get_vlan_enable(struct switch_dev *dev,
++			   const struct switch_attr *attr,
++			   struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	val->value.i = esw->global_vlan_enable;
++
++	return 0;
++}
++
++static int esw_set_vlan_enable(struct switch_dev *dev,
++			   const struct switch_attr *attr,
++			   struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	esw->global_vlan_enable = val->value.i != 0;
++
++	return 0;
++}
++
++static int esw_get_alt_vlan_disable(struct switch_dev *dev,
++				const struct switch_attr *attr,
++				struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	val->value.i = esw->alt_vlan_disable;
++
++	return 0;
++}
++
++static int esw_set_alt_vlan_disable(struct switch_dev *dev,
++				const struct switch_attr *attr,
++				struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	esw->alt_vlan_disable = val->value.i != 0;
++
++	return 0;
++}
++
++static int
++rt305x_esw_set_bc_status(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	esw->bc_storm_protect = val->value.i & RT305X_ESW_GSC_BC_STROM_MASK;
++
++	return 0;
++}
++
++static int
++rt305x_esw_get_bc_status(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	val->value.i = esw->bc_storm_protect;
++
++	return 0;
++}
++
++static int
++rt305x_esw_set_led_freq(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	esw->led_frequency = val->value.i & RT305X_ESW_GSC_LED_FREQ_MASK;
++
++	return 0;
++}
++
++static int
++rt305x_esw_get_led_freq(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	val->value.i = esw->led_frequency;
++
++	return 0;
++}
++
++static int esw_get_port_link(struct switch_dev *dev,
++			 int port,
++			 struct switch_port_link *link)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	u32 speed, poa;
++
++	if (port < 0 || port >= RT305X_ESW_NUM_PORTS)
++		return -EINVAL;
++
++	poa = esw_r32(esw, RT305X_ESW_REG_POA) >> port;
++
++	link->link = (poa >> RT305X_ESW_LINK_S) & 1;
++	link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1;
++	if (port < RT305X_ESW_NUM_LEDS) {
++		speed = (poa >> RT305X_ESW_SPD_S) & 1;
++	} else {
++		if (port == RT305X_ESW_NUM_PORTS - 1)
++			poa >>= 1;
++		speed = (poa >> RT305X_ESW_SPD_S) & 3;
++	}
++	switch (speed) {
++	case 0:
++		link->speed = SWITCH_PORT_SPEED_10;
++		break;
++	case 1:
++		link->speed = SWITCH_PORT_SPEED_100;
++		break;
++	case 2:
++	case 3: /* forced gige speed can be 2 or 3 */
++		link->speed = SWITCH_PORT_SPEED_1000;
++		break;
++	default:
++		link->speed = SWITCH_PORT_SPEED_UNKNOWN;
++		break;
++	}
++
++	return 0;
++}
++
++static int esw_get_port_bool(struct switch_dev *dev,
++			 const struct switch_attr *attr,
++			 struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int idx = val->port_vlan;
++	u32 x, reg, shift;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS)
++		return -EINVAL;
++
++	switch (attr->id) {
++	case RT305X_ESW_ATTR_PORT_DISABLE:
++		reg = RT305X_ESW_REG_POC0;
++		shift = RT305X_ESW_POC0_DIS_PORT_S;
++		break;
++	case RT305X_ESW_ATTR_PORT_DOUBLETAG:
++		reg = RT305X_ESW_REG_SGC2;
++		shift = RT305X_ESW_SGC2_DOUBLE_TAG_S;
++		break;
++	case RT305X_ESW_ATTR_PORT_UNTAG:
++		reg = RT305X_ESW_REG_POC2;
++		shift = RT305X_ESW_POC2_UNTAG_EN_S;
++		break;
++	case RT305X_ESW_ATTR_PORT_LAN:
++		reg = RT305X_ESW_REG_SGC2;
++		shift = RT305X_ESW_SGC2_LAN_PMAP_S;
++		if (idx >= RT305X_ESW_NUM_LANWAN)
++			return -EINVAL;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	x = esw_r32(esw, reg);
++	val->value.i = (x >> (idx + shift)) & 1;
++
++	return 0;
++}
++
++static int esw_set_port_bool(struct switch_dev *dev,
++			 const struct switch_attr *attr,
++			 struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int idx = val->port_vlan;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
++	    val->value.i < 0 || val->value.i > 1)
++		return -EINVAL;
++
++	switch (attr->id) {
++	case RT305X_ESW_ATTR_PORT_DISABLE:
++		esw->ports[idx].disable = val->value.i;
++		break;
++	case RT305X_ESW_ATTR_PORT_DOUBLETAG:
++		esw->ports[idx].doubletag = val->value.i;
++		break;
++	case RT305X_ESW_ATTR_PORT_UNTAG:
++		esw->ports[idx].untag = val->value.i;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int esw_get_port_recv_badgood(struct switch_dev *dev,
++				 const struct switch_attr *attr,
++				 struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int idx = val->port_vlan;
++	int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16;
++	u32 reg;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
++		return -EINVAL;
++	reg = esw_r32(esw, RT305X_ESW_REG_PXPC(idx));
++	val->value.i = (reg >> shift) & 0xffff;
++
++	return 0;
++}
++
++static int
++esw_get_port_tr_badgood(struct switch_dev *dev,
++				 const struct switch_attr *attr,
++				 struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	int idx = val->port_vlan;
++	int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16;
++	u32 reg;
++
++	if (!soc_is_rt5350())
++		return -EINVAL;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
++		return -EINVAL;
++
++	reg = esw_r32(esw, RT5350_ESW_REG_PXTPC(idx));
++	val->value.i = (reg >> shift) & 0xffff;
++
++	return 0;
++}
++
++static int esw_get_port_led(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int idx = val->port_vlan;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
++	    idx >= RT305X_ESW_NUM_LEDS)
++		return -EINVAL;
++
++	val->value.i = esw_r32(esw, RT305X_ESW_REG_P0LED + 4*idx);
++
++	return 0;
++}
++
++static int esw_set_port_led(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int idx = val->port_vlan;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS)
++		return -EINVAL;
++
++	esw->ports[idx].led = val->value.i;
++
++	return 0;
++}
++
++static int esw_get_port_pvid(struct switch_dev *dev, int port, int *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	if (port >= RT305X_ESW_NUM_PORTS)
++		return -EINVAL;
++
++	*val = esw_get_pvid(esw, port);
++
++	return 0;
++}
++
++static int esw_set_port_pvid(struct switch_dev *dev, int port, int val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	if (port >= RT305X_ESW_NUM_PORTS)
++		return -EINVAL;
++
++	esw->ports[port].pvid = val;
++
++	return 0;
++}
++
++static int esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	u32 vmsc, poc2;
++	int vlan_idx = -1;
++	int i;
++
++	val->len = 0;
++
++	if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS)
++		return -EINVAL;
++
++	/* valid vlan? */
++	for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++		if (esw_get_vlan_id(esw, i) == val->port_vlan &&
++		    esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) {
++			vlan_idx = i;
++			break;
++		}
++	}
++
++	if (vlan_idx == -1)
++		return -EINVAL;
++
++	vmsc = esw_get_vmsc(esw, vlan_idx);
++	poc2 = esw_r32(esw, RT305X_ESW_REG_POC2);
++
++	for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
++		struct switch_port *p;
++		int port_mask = 1 << i;
++
++		if (!(vmsc & port_mask))
++			continue;
++
++		p = &val->value.ports[val->len++];
++		p->id = i;
++		if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S))
++			p->flags = 0;
++		else
++			p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
++	}
++
++	return 0;
++}
++
++static int esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int ports;
++	int vlan_idx = -1;
++	int i;
++
++	if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS ||
++	    val->len > RT305X_ESW_NUM_PORTS)
++		return -EINVAL;
++
++	/* one of the already defined vlans? */
++	for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++		if (esw->vlans[i].vid == val->port_vlan &&
++		    esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) {
++			vlan_idx = i;
++			break;
++		}
++	}
++
++	/* select a free slot */
++	for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) {
++		if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE)
++			vlan_idx = i;
++	}
++
++	/* bail if all slots are in use */
++	if (vlan_idx == -1)
++		return -EINVAL;
++
++	ports = RT305X_ESW_PORTS_NONE;
++	for (i = 0; i < val->len; i++) {
++		struct switch_port *p = &val->value.ports[i];
++		int port_mask = 1 << p->id;
++		bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
++
++		if (p->id >= RT305X_ESW_NUM_PORTS)
++			return -EINVAL;
++
++		ports |= port_mask;
++		esw->ports[p->id].untag = untagged;
++	}
++	esw->vlans[vlan_idx].ports = ports;
++	if (ports == RT305X_ESW_PORTS_NONE)
++		esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE;
++	else
++		esw->vlans[vlan_idx].vid = val->port_vlan;
++
++	return 0;
++}
++
++static const struct switch_attr esw_global[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "enable_vlan",
++		.description = "VLAN mode (1:enabled)",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_ENABLE_VLAN,
++		.get = esw_get_vlan_enable,
++		.set = esw_set_vlan_enable,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "alternate_vlan_disable",
++		.description = "Use en_vlan instead of doubletag to disable"
++				" VLAN mode",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
++		.get = esw_get_alt_vlan_disable,
++		.set = esw_set_alt_vlan_disable,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "bc_storm_protect",
++		.description = "Global broadcast storm protection (0:Disable, 1:64 blocks, 2:96 blocks, 3:128 blocks)",
++		.max = 3,
++		.id = RT305X_ESW_ATTR_BC_STATUS,
++		.get = rt305x_esw_get_bc_status,
++		.set = rt305x_esw_set_bc_status,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "led_frequency",
++		.description = "LED Flash frequency (0:30mS, 1:60mS, 2:240mS, 3:480mS)",
++		.max = 3,
++		.id = RT305X_ESW_ATTR_LED_FREQ,
++		.get = rt305x_esw_get_led_freq,
++		.set = rt305x_esw_set_led_freq,
++	}
++};
++
++static const struct switch_attr esw_port[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "disable",
++		.description = "Port state (1:disabled)",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_PORT_DISABLE,
++		.get = esw_get_port_bool,
++		.set = esw_set_port_bool,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "doubletag",
++		.description = "Double tagging for incoming vlan packets "
++				"(1:enabled)",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_PORT_DOUBLETAG,
++		.get = esw_get_port_bool,
++		.set = esw_set_port_bool,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "untag",
++		.description = "Untag (1:strip outgoing vlan tag)",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_PORT_UNTAG,
++		.get = esw_get_port_bool,
++		.set = esw_set_port_bool,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "led",
++		.description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity,"
++				" 4:collision, 5:linkact, 6:duplcoll, 7:10mact,"
++				" 8:100mact, 10:blink, 11:off, 12:on)",
++		.max = 15,
++		.id = RT305X_ESW_ATTR_PORT_LED,
++		.get = esw_get_port_led,
++		.set = esw_set_port_led,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "lan",
++		.description = "HW port group (0:wan, 1:lan)",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_PORT_LAN,
++		.get = esw_get_port_bool,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "recv_bad",
++		.description = "Receive bad packet counter",
++		.id = RT305X_ESW_ATTR_PORT_RECV_BAD,
++		.get = esw_get_port_recv_badgood,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "recv_good",
++		.description = "Receive good packet counter",
++		.id = RT305X_ESW_ATTR_PORT_RECV_GOOD,
++		.get = esw_get_port_recv_badgood,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "tr_bad",
++
++		.description = "Transmit bad packet counter. rt5350 only",
++		.id = RT5350_ESW_ATTR_PORT_TR_BAD,
++		.get = esw_get_port_tr_badgood,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "tr_good",
++
++		.description = "Transmit good packet counter. rt5350 only",
++		.id = RT5350_ESW_ATTR_PORT_TR_GOOD,
++		.get = esw_get_port_tr_badgood,
++	},
++};
++
++static const struct switch_attr esw_vlan[] = {
++};
++
++static const struct switch_dev_ops esw_ops = {
++	.attr_global = {
++		.attr = esw_global,
++		.n_attr = ARRAY_SIZE(esw_global),
++	},
++	.attr_port = {
++		.attr = esw_port,
++		.n_attr = ARRAY_SIZE(esw_port),
++	},
++	.attr_vlan = {
++		.attr = esw_vlan,
++		.n_attr = ARRAY_SIZE(esw_vlan),
++	},
++	.get_vlan_ports = esw_get_vlan_ports,
++	.set_vlan_ports = esw_set_vlan_ports,
++	.get_port_pvid = esw_get_port_pvid,
++	.set_port_pvid = esw_set_port_pvid,
++	.get_port_link = esw_get_port_link,
++	.apply_config = esw_apply_config,
++	.reset_switch = esw_reset_switch,
++};
++
++static struct rt305x_esw_platform_data rt3050_esw_data = {
++	/* All ports are LAN ports. */
++	.vlan_config            = RT305X_ESW_VLAN_CONFIG_NONE,
++	.reg_initval_fct2       = 0x00d6500c,
++	/*
++	 * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
++	 * turbo mii off, rgmi 3.3v off
++	 * port5: disabled
++	 * port6: enabled, gige, full-duplex, rx/tx-flow-control
++	 */
++	.reg_initval_fpa2       = 0x3f502b28,
++};
++
++static const struct of_device_id ralink_esw_match[] = {
++	{ .compatible = "ralink,rt3050-esw", .data = &rt3050_esw_data },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ralink_esw_match);
++
++static int esw_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	const struct rt305x_esw_platform_data *pdata;
++	const __be32 *port_map, *reg_init;
++	struct rt305x_esw *esw;
++	struct switch_dev *swdev;
++	struct resource *res, *irq;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata) {
++		const struct of_device_id *match;
++		match = of_match_device(ralink_esw_match, &pdev->dev);
++		if (match)
++			pdata = (struct rt305x_esw_platform_data *) match->data;
++	}
++	if (!pdata)
++		return -EINVAL;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(&pdev->dev, "no memory resource found\n");
++		return -ENOMEM;
++	}
++
++	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (!irq) {
++		dev_err(&pdev->dev, "no irq resource found\n");
++		return -ENOMEM;
++	}
++
++	esw = kzalloc(sizeof(struct rt305x_esw), GFP_KERNEL);
++	if (!esw) {
++		dev_err(&pdev->dev, "no memory for private data\n");
++		return -ENOMEM;
++	}
++
++	esw->dev = &pdev->dev;
++	esw->irq = irq->start;
++	esw->base = ioremap(res->start, resource_size(res));
++	if (!esw->base) {
++		dev_err(&pdev->dev, "ioremap failed\n");
++		err = -ENOMEM;
++		goto free_esw;
++	}
++
++	port_map = of_get_property(np, "ralink,portmap", NULL);
++        if (port_map)
++		esw->port_map = be32_to_cpu(*port_map);
++
++	reg_init = of_get_property(np, "ralink,fct2", NULL);
++        if (reg_init)
++		esw->reg_initval_fct2 = be32_to_cpu(*reg_init);
++
++	reg_init = of_get_property(np, "ralink,fpa2", NULL);
++        if (reg_init)
++		esw->reg_initval_fpa2 = be32_to_cpu(*reg_init);
++
++	reg_init = of_get_property(np, "ralink,led_polarity", NULL);
++        if (reg_init)
++		esw->reg_led_polarity = be32_to_cpu(*reg_init);
++
++	swdev = &esw->swdev;
++	swdev->of_node = pdev->dev.of_node;
++	swdev->name = "rt305x-esw";
++	swdev->alias = "rt305x";
++	swdev->cpu_port = RT305X_ESW_PORT6;
++	swdev->ports = RT305X_ESW_NUM_PORTS;
++	swdev->vlans = RT305X_ESW_NUM_VIDS;
++	swdev->ops = &esw_ops;
++
++	err = register_switch(swdev, NULL);
++	if (err < 0) {
++		dev_err(&pdev->dev, "register_switch failed\n");
++		goto unmap_base;
++	}
++
++	platform_set_drvdata(pdev, esw);
++
++	esw->pdata = pdata;
++	spin_lock_init(&esw->reg_rw_lock);
++
++	esw_hw_init(esw);
++
++	esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
++	esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
++	request_irq(esw->irq, esw_interrupt, 0, "esw", esw);
++
++	return 0;
++
++unmap_base:
++	iounmap(esw->base);
++free_esw:
++	kfree(esw);
++	return err;
++}
++
++static int esw_remove(struct platform_device *pdev)
++{
++	struct rt305x_esw *esw;
++
++	esw = platform_get_drvdata(pdev);
++	if (esw) {
++		unregister_switch(&esw->swdev);
++		platform_set_drvdata(pdev, NULL);
++		iounmap(esw->base);
++		kfree(esw);
++	}
++
++	return 0;
++}
++
++static struct platform_driver esw_driver = {
++	.probe = esw_probe,
++	.remove = esw_remove,
++	.driver = {
++		.name = "rt305x-esw",
++		.owner = THIS_MODULE,
++		.of_match_table = ralink_esw_match,
++	},
++};
++
++int __init rtesw_init(void)
++{
++	return platform_driver_register(&esw_driver);
++}
++
++void rtesw_exit(void)
++{
++	platform_driver_unregister(&esw_driver);
++}
+diff --git a/drivers/net/ethernet/ralink/esw_rt3052.h b/drivers/net/ethernet/ralink/esw_rt3052.h
+new file mode 100644
+index 0000000..2ced3dff
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/esw_rt3052.h
+@@ -0,0 +1,32 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_ESW_RT3052_H__
++#define _RALINK_ESW_RT3052_H__
++
++#ifdef CONFIG_NET_RALINK_ESW_RT3052
++
++int __init rtesw_init(void);
++void rtesw_exit(void);
++
++#else
++
++static inline int __init rtesw_init(void) { return 0; }
++static inline void rtesw_exit(void) { }
++
++#endif
++#endif
+diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.c b/drivers/net/ethernet/ralink/gsw_mt7620a.c
+new file mode 100644
+index 0000000..9fa6a54
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.c
+@@ -0,0 +1,1027 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++#include <linux/of_irq.h>
++#include <linux/of_address.h>
++#include <linux/switch.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++
++#include <linux/ioport.h>
++#include <linux/switch.h>
++#include <linux/mii.h>
++
++#include <ralink_regs.h>
++#include <asm/mach-ralink/mt7620.h>
++
++#include "ralink_soc_eth.h"
++#include "gsw_mt7620a.h"
++#include "mdio.h"
++
++#define GSW_REG_PHY_TIMEOUT	(5 * HZ)
++
++#define MT7620A_GSW_REG_PIAC	0x7004
++
++#define GSW_NUM_VLANS		16
++#define GSW_NUM_VIDS		4096
++#define GSW_NUM_PORTS		7
++#define GSW_PORT6		6
++
++#define GSW_MDIO_ACCESS		BIT(31)
++#define GSW_MDIO_READ		BIT(19)
++#define GSW_MDIO_WRITE		BIT(18)
++#define GSW_MDIO_START		BIT(16)
++#define GSW_MDIO_ADDR_SHIFT	20
++#define GSW_MDIO_REG_SHIFT	25
++
++#define GSW_REG_PORT_PMCR(x)	(0x3000 + (x * 0x100))
++#define GSW_REG_PORT_STATUS(x)	(0x3008 + (x * 0x100))
++#define GSW_REG_SMACCR0		0x3fE4
++#define GSW_REG_SMACCR1		0x3fE8
++#define GSW_REG_CKGCR		0x3ff0
++
++#define GSW_REG_IMR		0x7008
++#define GSW_REG_ISR		0x700c
++
++#define SYSC_REG_CFG1		0x14
++
++#define PORT_IRQ_ST_CHG		0x7f
++
++#define GSW_VLAN_VTCR		0x90
++#define GSW_VLAN_VTCR_VID_M	0xfff
++#define GSW_VLAN_ID(_x)		(0x100 + (4 * (_x)))
++#define GSW_VLAN_ID_VID_S	12
++#define GSW_VLAN_ID_VID_M	0xfff
++
++#define GSW_VAWD1		0x94
++#define GSW_VAWD1_VTAG_EN	BIT(28)
++#define GSW_VAWD1_PORTM_S	16
++#define GSW_VAWD1_PORTM_M	0xff
++
++#define GSW_VAWD2		0x98
++#define GSW_VAWD2_PORTT_S	16
++#define GSW_VAWD2_PORTT_M	0xff
++
++#define GSW_VTIM(_x)		(0x100 + (4 * (_x)))
++#define GSW_VTIM_M		0xfff
++#define GSW_VTIM_S		12
++
++#define GSW_REG_PCR(x)		(0x2004 + (x * 0x100))
++#define GSW_REG_PCR_EG_TAG_S	28
++#define GSW_REG_PCR_EG_TAG_M	0x3
++
++#define SYSCFG1			0x14
++
++#define ESW_PHY_POLLING		0x7000
++
++#define	PMCR_IPG		BIT(18)
++#define	PMCR_MAC_MODE		BIT(16)
++#define	PMCR_FORCE		BIT(15)
++#define	PMCR_TX_EN		BIT(14)
++#define	PMCR_RX_EN		BIT(13)
++#define	PMCR_BACKOFF		BIT(9)
++#define	PMCR_BACKPRES		BIT(8)
++#define	PMCR_RX_FC		BIT(5)
++#define	PMCR_TX_FC		BIT(4)
++#define	PMCR_SPEED(_x)		(_x << 2)
++#define	PMCR_DUPLEX		BIT(1)
++#define	PMCR_LINK		BIT(0)
++
++#define PHY_AN_EN		BIT(31)
++#define PHY_PRE_EN		BIT(30)
++#define PMY_MDC_CONF(_x)	((_x & 0x3f) << 24)
++
++enum {
++	/* Global attributes. */
++	GSW_ATTR_ENABLE_VLAN,
++	/* Port attributes. */
++	GSW_ATTR_PORT_UNTAG,
++};
++
++enum {
++	PORT4_EPHY = 0,
++	PORT4_EXT,
++};
++
++struct gsw_port {
++	bool	disable;
++	bool	untag;
++	u16	pvid;
++};
++
++struct gsw_vlan {
++	u8	ports;
++	u16	vid;
++};
++
++struct mt7620_gsw {
++	struct device		*dev;
++	void __iomem		*base;
++	int			irq;
++
++	struct switch_dev	swdev;
++	bool			global_vlan_enable;
++	struct gsw_vlan		vlans[GSW_NUM_VLANS];
++	struct gsw_port		ports[GSW_NUM_PORTS];
++	long unsigned int	autopoll;
++	int			port4;
++};
++
++static inline void gsw_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
++{
++	iowrite32(val, gsw->base + reg);
++}
++
++static inline u32 gsw_r32(struct mt7620_gsw *gsw, unsigned reg)
++{
++	return ioread32(gsw->base + reg);
++}
++
++static int mt7620_mii_busy_wait(struct mt7620_gsw *gsw)
++{
++	unsigned long t_start = jiffies;
++
++	while (1) {
++		if (!(gsw_r32(gsw, MT7620A_GSW_REG_PIAC) & GSW_MDIO_ACCESS))
++			return 0;
++		if (time_after(jiffies, t_start + GSW_REG_PHY_TIMEOUT)) {
++			break;
++		}
++	}
++
++	printk(KERN_ERR "mdio: MDIO timeout\n");
++	return -1;
++}
++
++static u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr, u32 phy_register,
++				u32 write_data)
++{
++	if (mt7620_mii_busy_wait(gsw))
++		return -1;
++
++	write_data &= 0xffff;
++
++	gsw_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_WRITE |
++		(phy_register << GSW_MDIO_REG_SHIFT) |
++		(phy_addr << GSW_MDIO_ADDR_SHIFT) | write_data,
++		MT7620A_GSW_REG_PIAC);
++
++	if (mt7620_mii_busy_wait(gsw))
++		return -1;
++
++	return 0;
++}
++
++int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
++{
++	struct fe_priv *priv = bus->priv;
++	struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++
++	return _mt7620_mii_write(gsw, phy_addr, phy_reg, val);
++}
++
++int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++	struct fe_priv *priv = bus->priv;
++	struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++	u32 d;
++
++	if (mt7620_mii_busy_wait(gsw))
++		return 0xffff;
++
++	gsw_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_READ |
++		(phy_reg << GSW_MDIO_REG_SHIFT) |
++		(phy_addr << GSW_MDIO_ADDR_SHIFT),
++		MT7620A_GSW_REG_PIAC);
++
++	if (mt7620_mii_busy_wait(gsw))
++		return 0xffff;
++
++	d = gsw_r32(gsw, MT7620A_GSW_REG_PIAC) & 0xffff;
++
++	return d;
++}
++
++static unsigned char *fe_speed_str(int speed)
++{
++	switch (speed) {
++	case 2:
++	case SPEED_1000:
++		return "1000";
++	case 1:
++	case SPEED_100:
++		return "100";
++	case 0:
++	case SPEED_10:
++		return "10";
++	}
++
++	return "? ";
++}
++
++int mt7620a_has_carrier(struct fe_priv *priv)
++{
++        struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++	int i;
++
++	for (i = 0; i < GSW_PORT6; i++)
++		if (gsw_r32(gsw, GSW_REG_PORT_STATUS(i)) & 0x1)
++			return 1;
++	return 0;
++}
++
++static void mt7620a_handle_carrier(struct fe_priv *priv)
++{
++	if (!priv->phy)
++		return;
++
++	if (mt7620a_has_carrier(priv))
++		netif_carrier_on(priv->netdev);
++	else
++		netif_carrier_off(priv->netdev);
++}
++
++void mt7620_mdio_link_adjust(struct fe_priv *priv, int port)
++{
++	if (priv->link[port])
++		netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
++			port, fe_speed_str(priv->phy->speed[port]),
++			(DUPLEX_FULL == priv->phy->duplex[port]) ? "Full" : "Half");
++	else
++		netdev_info(priv->netdev, "port %d link down\n", port);
++	mt7620a_handle_carrier(priv);
++}
++
++static irqreturn_t gsw_interrupt(int irq, void *_priv)
++{
++	struct fe_priv *priv = (struct fe_priv *) _priv;
++	struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++	u32 status;
++	int i, max = (gsw->port4 == PORT4_EPHY) ? (4) : (3);
++
++	status = gsw_r32(gsw, GSW_REG_ISR);
++	if (status & PORT_IRQ_ST_CHG)
++		for (i = 0; i <= max; i++) {
++			u32 status = gsw_r32(gsw, GSW_REG_PORT_STATUS(i));
++			int link = status & 0x1;
++
++			if (link != priv->link[i]) {
++				if (link)
++					netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
++							i, fe_speed_str((status >> 2) & 3),
++							(status & 0x2) ? "Full" : "Half");
++				else
++					netdev_info(priv->netdev, "port %d link down\n", i);
++			}
++
++			priv->link[i] = link;
++		}
++	mt7620a_handle_carrier(priv);
++
++	gsw_w32(gsw, status, GSW_REG_ISR);
++
++	return IRQ_HANDLED;
++}
++
++static int mt7620_is_bga(void)
++{
++	u32 bga = rt_sysc_r32(0x0c);
++
++	return (bga >> 16) & 1;
++}
++
++static void gsw_auto_poll(struct mt7620_gsw *gsw)
++{
++	int phy;
++	int lsb = -1, msb = 0;
++
++	for_each_set_bit(phy, &gsw->autopoll, 32) {
++		if (lsb < 0)
++			lsb = phy;
++		msb = phy;
++	}
++
++	gsw_w32(gsw, PHY_AN_EN | PHY_PRE_EN | PMY_MDC_CONF(5) | (msb << 8) | lsb, ESW_PHY_POLLING);
++}
++
++void mt7620_port_init(struct fe_priv *priv, struct device_node *np)
++{
++	struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++	const __be32 *_id = of_get_property(np, "reg", NULL);
++	int phy_mode, size, id;
++	int shift = 12;
++	u32 val, mask = 0;
++	int min = (gsw->port4 == PORT4_EPHY) ? (5) : (4);
++
++	if (!_id || (be32_to_cpu(*_id) < min) || (be32_to_cpu(*_id) > 5)) {
++		if (_id)
++			pr_err("%s: invalid port id %d\n", np->name, be32_to_cpu(*_id));
++		else
++			pr_err("%s: invalid port id\n", np->name);
++		return;
++	}
++
++	id = be32_to_cpu(*_id);
++
++	if (id == 4)
++		shift = 14;
++
++	priv->phy->phy_fixed[id] = of_get_property(np, "ralink,fixed-link", &size);
++	if (priv->phy->phy_fixed[id] && (size != (4 * sizeof(*priv->phy->phy_fixed[id])))) {
++		pr_err("%s: invalid fixed link property\n", np->name);
++		priv->phy->phy_fixed[id] = NULL;
++		return;
++	}
++
++	phy_mode = of_get_phy_mode(np);
++	switch (phy_mode) {
++	case PHY_INTERFACE_MODE_RGMII:
++		mask = 0;
++		break;
++	case PHY_INTERFACE_MODE_MII:
++		mask = 1;
++		break;
++	case PHY_INTERFACE_MODE_RMII:
++		mask = 2;
++		break;
++	default:
++		dev_err(priv->device, "port %d - invalid phy mode\n", priv->phy->speed[id]);
++		return;
++	}
++
++	priv->phy->phy_node[id] = of_parse_phandle(np, "phy-handle", 0);
++	if (!priv->phy->phy_node[id] && !priv->phy->phy_fixed[id])
++		return;
++
++	val = rt_sysc_r32(SYSCFG1);
++	val &= ~(3 << shift);
++	val |= mask << shift;
++	rt_sysc_w32(val, SYSCFG1);
++
++	if (priv->phy->phy_fixed[id]) {
++		const __be32 *link = priv->phy->phy_fixed[id];
++		int tx_fc = be32_to_cpup(link++);
++		int rx_fc = be32_to_cpup(link++);
++		u32 val = 0;
++
++		priv->phy->speed[id] = be32_to_cpup(link++);
++		priv->phy->duplex[id] = be32_to_cpup(link++);
++		priv->link[id] = 1;
++
++		switch (priv->phy->speed[id]) {
++		case SPEED_10:
++			val = 0;
++			break;
++		case SPEED_100:
++			val = 1;
++			break;
++		case SPEED_1000:
++			val = 2;
++			break;
++		default:
++			dev_err(priv->device, "invalid link speed: %d\n", priv->phy->speed[id]);
++			priv->phy->phy_fixed[id] = 0;
++			return;
++		}
++		val = PMCR_SPEED(val);
++		val |= PMCR_LINK | PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
++			PMCR_TX_EN | PMCR_FORCE | PMCR_MAC_MODE | PMCR_IPG;
++		if (tx_fc)
++			val |= PMCR_TX_FC;
++		if (rx_fc)
++			val |= PMCR_RX_FC;
++		if (priv->phy->duplex[id])
++			val |= PMCR_DUPLEX;
++		gsw_w32(gsw, val, GSW_REG_PORT_PMCR(id));
++		dev_info(priv->device, "using fixed link parameters\n");
++		return;
++	}
++
++	if (priv->phy->phy_node[id] && priv->mii_bus->phy_map[id]) {
++		u32 val = PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
++			PMCR_TX_EN |  PMCR_MAC_MODE | PMCR_IPG;
++
++		gsw_w32(gsw, val, GSW_REG_PORT_PMCR(id));
++		fe_connect_phy_node(priv, priv->phy->phy_node[id]);
++		gsw->autopoll |= BIT(id);
++		gsw_auto_poll(gsw);
++		return;
++	}
++}
++
++static void gsw_hw_init(struct mt7620_gsw *gsw)
++{
++	u32 is_BGA = mt7620_is_bga();
++
++	rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | BIT(8), SYSC_REG_CFG1);
++	gsw_w32(gsw, gsw_r32(gsw, GSW_REG_CKGCR) & ~(0x3 << 4), GSW_REG_CKGCR);
++
++	/*correct  PHY  setting L3.0 BGA*/
++	_mt7620_mii_write(gsw, 1, 31, 0x4000); //global, page 4
++
++	_mt7620_mii_write(gsw, 1, 17, 0x7444);
++	if (is_BGA)
++		_mt7620_mii_write(gsw, 1, 19, 0x0114);
++	else
++		_mt7620_mii_write(gsw, 1, 19, 0x0117);
++
++	_mt7620_mii_write(gsw, 1, 22, 0x10cf);
++	_mt7620_mii_write(gsw, 1, 25, 0x6212);
++	_mt7620_mii_write(gsw, 1, 26, 0x0777);
++	_mt7620_mii_write(gsw, 1, 29, 0x4000);
++	_mt7620_mii_write(gsw, 1, 28, 0xc077);
++	_mt7620_mii_write(gsw, 1, 24, 0x0000);
++
++	_mt7620_mii_write(gsw, 1, 31, 0x3000); //global, page 3
++	_mt7620_mii_write(gsw, 1, 17, 0x4838);
++
++	_mt7620_mii_write(gsw, 1, 31, 0x2000); //global, page 2
++	if (is_BGA) {
++		_mt7620_mii_write(gsw, 1, 21, 0x0515);
++		_mt7620_mii_write(gsw, 1, 22, 0x0053);
++		_mt7620_mii_write(gsw, 1, 23, 0x00bf);
++		_mt7620_mii_write(gsw, 1, 24, 0x0aaf);
++		_mt7620_mii_write(gsw, 1, 25, 0x0fad);
++		_mt7620_mii_write(gsw, 1, 26, 0x0fc1);
++	} else {
++		_mt7620_mii_write(gsw, 1, 21, 0x0517);
++		_mt7620_mii_write(gsw, 1, 22, 0x0fd2);
++		_mt7620_mii_write(gsw, 1, 23, 0x00bf);
++		_mt7620_mii_write(gsw, 1, 24, 0x0aab);
++		_mt7620_mii_write(gsw, 1, 25, 0x00ae);
++		_mt7620_mii_write(gsw, 1, 26, 0x0fff);
++	}
++	_mt7620_mii_write(gsw, 1, 31, 0x1000); //global, page 1
++	_mt7620_mii_write(gsw, 1, 17, 0xe7f8);
++
++	_mt7620_mii_write(gsw, 1, 31, 0x8000); //local, page 0
++	_mt7620_mii_write(gsw, 0, 30, 0xa000);
++	_mt7620_mii_write(gsw, 1, 30, 0xa000);
++	_mt7620_mii_write(gsw, 2, 30, 0xa000);
++	_mt7620_mii_write(gsw, 3, 30, 0xa000);
++
++	_mt7620_mii_write(gsw, 0, 4, 0x05e1);
++	_mt7620_mii_write(gsw, 1, 4, 0x05e1);
++	_mt7620_mii_write(gsw, 2, 4, 0x05e1);
++	_mt7620_mii_write(gsw, 3, 4, 0x05e1);
++	_mt7620_mii_write(gsw, 1, 31, 0xa000); //local, page 2
++	_mt7620_mii_write(gsw, 0, 16, 0x1111);
++	_mt7620_mii_write(gsw, 1, 16, 0x1010);
++	_mt7620_mii_write(gsw, 2, 16, 0x1515);
++	_mt7620_mii_write(gsw, 3, 16, 0x0f0f);
++
++	/* CPU Port6 Force Link 1G, FC ON */
++	gsw_w32(gsw, 0x5e33b, GSW_REG_PORT_PMCR(6));
++	/* Set Port6 CPU Port */
++	gsw_w32(gsw, 0x7f7f7fe0, 0x0010);
++
++//	GSW_VAWD2
++
++	/* setup port 4 */
++	if (gsw->port4 == PORT4_EPHY) {
++		u32 val = rt_sysc_r32(SYSCFG1);
++		val |= 3 << 14;
++		rt_sysc_w32(val, SYSCFG1);
++		_mt7620_mii_write(gsw, 4, 30, 0xa000);
++		_mt7620_mii_write(gsw, 4, 4, 0x05e1);
++		_mt7620_mii_write(gsw, 4, 16, 0x1313);
++		pr_info("gsw: setting port4 to ephy mode\n");
++	}
++}
++
++static int gsw_reset_switch(struct switch_dev *dev)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++
++	gsw->global_vlan_enable = 0;
++	memset(gsw->ports, 0, sizeof(gsw->ports));
++	memset(gsw->vlans, 0, sizeof(gsw->vlans));
++	gsw_hw_init(gsw);
++
++	return 0;
++}
++
++static int gsw_get_vlan_enable(struct switch_dev *dev,
++			   const struct switch_attr *attr,
++			   struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++
++	val->value.i = gsw->global_vlan_enable;
++
++	return 0;
++}
++
++static int gsw_set_vlan_enable(struct switch_dev *dev,
++			   const struct switch_attr *attr,
++			   struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++
++	gsw->global_vlan_enable = val->value.i != 0;
++
++	return 0;
++}
++
++static unsigned gsw_get_pvid(struct mt7620_gsw *gsw, unsigned port)
++{
++	unsigned s, val;
++
++	s = GSW_VTIM_S * (port % 2);
++	val = gsw_r32(gsw, GSW_VTIM(port / 2));
++
++	return (val >> s) & GSW_VTIM_M;
++}
++
++static void gsw_set_pvid(struct mt7620_gsw *gsw, unsigned port, unsigned pvid)
++{
++	unsigned s, val;
++
++	s = GSW_VTIM_S * (port % 2);
++	val = gsw_r32(gsw, GSW_VTIM(port / 2));
++	val &= ~(GSW_VTIM_M << s);
++	val |= (pvid && GSW_VTIM_M) << s;
++	gsw_w32(gsw, val, GSW_VTIM(port / 2));
++}
++
++static int gsw_get_port_bool(struct switch_dev *dev,
++			 const struct switch_attr *attr,
++			 struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int idx = val->port_vlan;
++
++	if (idx < 0 || idx >= GSW_NUM_PORTS)
++		return -EINVAL;
++
++	switch (attr->id) {
++	case GSW_ATTR_PORT_UNTAG:
++		return gsw->ports[idx].untag;
++	}
++
++	return -EINVAL;
++}
++
++static int gsw_get_port_pvid(struct switch_dev *dev, int port, int *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++
++	if (port >= GSW_NUM_PORTS)
++		return -EINVAL;
++
++	*val = gsw_get_pvid(gsw, port);
++
++	return 0;
++}
++
++static int gsw_set_port_pvid(struct switch_dev *dev, int port, int val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++
++	if (port >= GSW_NUM_PORTS)
++		return -EINVAL;
++
++	gsw->ports[port].pvid = val;
++
++	return 0;
++}
++
++static void gsw_set_vtcr(struct switch_dev *dev, u32 vid)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int retry = 1000;
++
++	gsw_w32(gsw, 0x80000000 | (BIT(vid) & GSW_VLAN_VTCR_VID_M), GSW_VLAN_VTCR);
++	while (retry-- && (gsw_r32(gsw, GSW_VLAN_VTCR) & 0x80000000))
++		;
++}
++
++static void gsw_apply_vtcr(struct switch_dev *dev, u32 vid)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int retry = 1000;
++
++	gsw_w32(gsw, 0x80001000 | (BIT(vid) & GSW_VLAN_VTCR_VID_M), GSW_VLAN_VTCR);
++	while (retry-- && (gsw_r32(gsw, GSW_VLAN_VTCR) & 0x80000000))
++		;
++}
++
++static unsigned gsw_get_vlan_id(struct mt7620_gsw *gsw, unsigned vlan)
++{
++	unsigned s;
++	unsigned val;
++
++	s = GSW_VLAN_ID_VID_S * (vlan % 2);
++	val = gsw_r32(gsw, GSW_VLAN_ID(vlan / 2));
++	val = (val >> s) & GSW_VLAN_ID_VID_M;
++
++	return val;
++}
++
++static void gsw_set_vlan_id(struct mt7620_gsw *gsw, unsigned vlan, unsigned vid)
++{
++	unsigned s;
++	unsigned val;
++
++	s = GSW_VLAN_ID_VID_S * (vlan % 2);
++	val = gsw_r32(gsw, GSW_VLAN_ID(vlan / 2));
++	val &= ~(GSW_VLAN_ID_VID_M << s);
++	val |= (vid << s);
++	gsw_w32(gsw, val, GSW_VLAN_ID(vlan / 2));
++}
++
++static void gsw_vlan_tagging_enable(struct mt7620_gsw *gsw, unsigned vlan, unsigned enable)
++{
++	unsigned val;
++
++	val = gsw_r32(gsw, GSW_VAWD1);
++	if (enable)
++		val |= GSW_VAWD1_VTAG_EN;
++	else
++		val &= ~GSW_VAWD1_VTAG_EN;
++	gsw_w32(gsw, val, GSW_VAWD1);
++}
++
++static unsigned gsw_get_port_member(struct mt7620_gsw *gsw, unsigned vlan)
++{
++	unsigned val;
++
++	gsw_set_vtcr(&gsw->swdev, vlan);
++
++	val = gsw_r32(gsw, GSW_VAWD1);
++	val = (val >> GSW_VAWD1_PORTM_S) & GSW_VAWD1_PORTM_M;
++
++	return val;
++}
++
++static void gsw_set_port_member(struct mt7620_gsw *gsw, unsigned vlan, unsigned member)
++{
++	unsigned val;
++
++	val = gsw_r32(gsw, GSW_VAWD1);
++	val = ~(GSW_VAWD1_PORTM_M << GSW_VAWD1_PORTM_S);
++	val |= (member & GSW_VAWD1_PORTM_M) << GSW_VAWD1_PORTM_S;
++        gsw_w32(gsw, val, GSW_VAWD1);
++}
++
++static unsigned gsw_get_port_tag(struct mt7620_gsw *gsw, unsigned port)
++{
++	unsigned val;
++
++	val = gsw_r32(gsw, GSW_REG_PCR(port));
++	val >>= GSW_REG_PCR_EG_TAG_S;
++	val &= GSW_REG_PCR_EG_TAG_M;
++
++	return !!val;
++}
++
++static void gsw_set_port_untag(struct mt7620_gsw *gsw, unsigned port, unsigned untag)
++{
++	unsigned val;
++
++	val = gsw_r32(gsw, GSW_REG_PCR(port));
++	if (!untag)
++		untag = 0x2;
++	else
++		untag = 0;
++	val &= ~(GSW_REG_PCR_EG_TAG_M << GSW_REG_PCR_EG_TAG_S);
++	val |= (untag & GSW_REG_PCR_EG_TAG_M) << GSW_REG_PCR_EG_TAG_S;
++	gsw_w32(gsw, val, GSW_REG_PCR(port));
++}
++
++static int gsw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int vlan_idx = -1;
++	u32 member;
++	int i;
++
++	val->len = 0;
++
++	if (val->port_vlan < 0 || val->port_vlan >= GSW_NUM_VIDS)
++		return -EINVAL;
++
++	/* valid vlan? */
++	for (i = 0; i < GSW_NUM_VLANS; i++) {
++		if (gsw_get_vlan_id(gsw, i) != val->port_vlan)
++			continue;
++		member = gsw_get_port_member(gsw, i);
++		vlan_idx = i;
++		break;
++	}
++
++	if (vlan_idx == -1)
++		return -EINVAL;
++
++	for (i = 0; i < GSW_NUM_PORTS; i++) {
++		struct switch_port *p;
++		int port_mask = 1 << i;
++
++		if (!(member & port_mask))
++			continue;
++
++		p = &val->value.ports[val->len++];
++		p->id = i;
++		if (gsw_get_port_tag(gsw, i))
++			p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
++		else
++			p->flags = 0;
++	}
++
++	return 0;
++}
++
++static int gsw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int ports;
++	int vlan_idx = -1;
++	int i;
++
++	if (val->port_vlan < 0 || val->port_vlan >= GSW_NUM_VIDS ||
++			val->len > GSW_NUM_PORTS)
++		return -EINVAL;
++
++	/* one of the already defined vlans? */
++	for (i = 0; i < GSW_NUM_VLANS; i++) {
++		if (gsw->vlans[i].vid == val->port_vlan &&
++		    gsw->vlans[i].ports) {
++			vlan_idx = i;
++			break;
++		}
++	}
++
++	/* select a free slot */
++	for (i = 0; vlan_idx == -1 && i < GSW_NUM_VLANS; i++) {
++		if (!gsw->vlans[i].ports)
++			vlan_idx = i;
++	}
++
++	/* bail if all slots are in use */
++	if (vlan_idx == -1)
++		return -EINVAL;
++
++	ports = 0;
++	for (i = 0; i < val->len; i++) {
++		struct switch_port *p = &val->value.ports[i];
++		int port_mask = 1 << p->id;
++		bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
++
++		if (p->id >= GSW_NUM_PORTS)
++			return -EINVAL;
++
++		ports |= port_mask;
++		gsw->ports[p->id].untag = untagged;
++	}
++	gsw->vlans[vlan_idx].ports = ports;
++	if (!ports)
++		gsw->vlans[vlan_idx].vid = 0xfff;
++	else
++		gsw->vlans[vlan_idx].vid = val->port_vlan;
++
++	return 0;
++}
++
++static int gsw_apply_config(struct switch_dev *dev)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int i;
++
++	for (i = 0; i < GSW_NUM_VLANS; i++) {
++		gsw_set_vtcr(&gsw->swdev, i);
++		if (gsw->global_vlan_enable) {
++			gsw_set_vlan_id(gsw, i, gsw->vlans[i].vid);
++			gsw_set_port_member(gsw, i, gsw->vlans[i].ports);
++			gsw_vlan_tagging_enable(gsw, i, 1);
++		} else {
++			gsw_set_vlan_id(gsw, i, 0xfff);
++			gsw_set_port_member(gsw, i, 0);
++			gsw_vlan_tagging_enable(gsw, i, 0);
++		}
++		gsw_apply_vtcr(&gsw->swdev, i);
++	}
++
++	for (i = 0; i < GSW_NUM_PORTS; i++) {
++		if (gsw->global_vlan_enable) {
++			gsw_set_port_untag(gsw, i, !gsw->ports[i].untag);
++			gsw_set_pvid(gsw, i, gsw->ports[i].pvid);
++		} else {
++			gsw_set_port_untag(gsw, i, 0);
++			gsw_set_pvid(gsw, i, 0);
++		}
++	}
++
++	if (!gsw->global_vlan_enable)
++		gsw_set_vlan_id(gsw, 0, 0);
++
++	return 0;
++}
++
++static int gsw_get_port_link(struct switch_dev *dev,
++			 int port,
++			 struct switch_port_link *link)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	u32 status;
++
++	if (port < 0 || port >= GSW_NUM_PORTS)
++		return -EINVAL;
++
++	status = gsw_r32(gsw, GSW_REG_PORT_STATUS(port));
++	link->link = status & 0x1;
++	link->duplex = (status >> 1) & 1;
++
++	switch ((status >> 2) & 0x3) {
++	case 0:
++		link->speed = SWITCH_PORT_SPEED_10;
++		break;
++	case 1:
++		link->speed = SWITCH_PORT_SPEED_100;
++		break;
++	case 2:
++	case 3: // forced gige speed can be 2 or 3
++		link->speed = SWITCH_PORT_SPEED_1000;
++		break;
++	}
++
++	return 0;
++}
++
++static int gsw_set_port_bool(struct switch_dev *dev,
++			 const struct switch_attr *attr,
++			 struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int idx = val->port_vlan;
++
++	if (idx < 0 || idx >= GSW_NUM_PORTS ||
++	    val->value.i < 0 || val->value.i > 1)
++		return -EINVAL;
++
++	switch (attr->id) {
++	case GSW_ATTR_PORT_UNTAG:
++		gsw->ports[idx].untag = val->value.i;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static const struct switch_attr gsw_global[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "enable_vlan",
++		.description = "VLAN mode (1:enabled)",
++		.max = 1,
++		.id = GSW_ATTR_ENABLE_VLAN,
++		.get = gsw_get_vlan_enable,
++		.set = gsw_set_vlan_enable,
++	},
++};
++
++static const struct switch_attr gsw_port[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "untag",
++		.description = "Untag (1:strip outgoing vlan tag)",
++		.max = 1,
++		.id = GSW_ATTR_PORT_UNTAG,
++		.get = gsw_get_port_bool,
++		.set = gsw_set_port_bool,
++	},
++};
++
++static const struct switch_attr gsw_vlan[] = {
++};
++
++static const struct switch_dev_ops gsw_ops = {
++	.attr_global = {
++		.attr = gsw_global,
++		.n_attr = ARRAY_SIZE(gsw_global),
++	},
++	.attr_port = {
++		.attr = gsw_port,
++		.n_attr = ARRAY_SIZE(gsw_port),
++	},
++	.attr_vlan = {
++		.attr = gsw_vlan,
++		.n_attr = ARRAY_SIZE(gsw_vlan),
++	},
++	.get_vlan_ports = gsw_get_vlan_ports,
++	.set_vlan_ports = gsw_set_vlan_ports,
++	.get_port_pvid = gsw_get_port_pvid,
++	.set_port_pvid = gsw_set_port_pvid,
++	.get_port_link = gsw_get_port_link,
++	.apply_config = gsw_apply_config,
++	.reset_switch = gsw_reset_switch,
++};
++
++void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac)
++{
++	struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++	unsigned long flags;
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	gsw_w32(gsw, (mac[0] << 8) | mac[1], GSW_REG_SMACCR1);
++	gsw_w32(gsw, (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++		GSW_REG_SMACCR0);
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static struct of_device_id gsw_match[] = {
++	{ .compatible = "ralink,mt7620a-gsw" },
++	{}
++};
++
++int mt7620_gsw_probe(struct fe_priv *priv)
++{
++	struct mt7620_gsw *gsw;
++	struct device_node *np;
++	struct switch_dev *swdev;
++	const char *port4 = NULL;
++
++	np = of_find_matching_node(NULL, gsw_match);
++	if (!np) {
++		dev_err(priv->device, "no gsw node found\n");
++		return -EINVAL;
++	}
++	np = of_node_get(np);
++
++	gsw = devm_kzalloc(priv->device, sizeof(struct mt7620_gsw), GFP_KERNEL);
++	if (!gsw) {
++		dev_err(priv->device, "no gsw memory for private data\n");
++		return -ENOMEM;
++	}
++
++	gsw->irq = irq_of_parse_and_map(np, 0);
++	if (!gsw->irq) {
++		dev_err(priv->device, "no gsw irq resource found\n");
++		return -ENOMEM;
++	}
++
++	gsw->base = of_iomap(np, 0);
++	if (!gsw->base) {
++		dev_err(priv->device, "gsw ioremap failed\n");
++	}
++
++	gsw->dev = priv->device;
++	priv->soc->swpriv = gsw;
++
++	swdev = &gsw->swdev;
++	swdev->of_node = np;
++	swdev->name = "mt7620a-gsw";
++	swdev->alias = "mt7620x";
++	swdev->cpu_port = GSW_PORT6;
++	swdev->ports = GSW_NUM_PORTS;
++	swdev->vlans = GSW_NUM_VLANS;
++	swdev->ops = &gsw_ops;
++
++	if (register_switch(swdev, NULL))
++		dev_err(priv->device, "register_switch failed\n");
++
++	of_property_read_string(np, "ralink,port4", &port4);
++	if (port4 && !strcmp(port4, "ephy"))
++		gsw->port4 = PORT4_EPHY;
++	else if (port4 && !strcmp(port4, "gmac"))
++		gsw->port4 = PORT4_EXT;
++	else
++		WARN_ON(port4);
++
++	gsw_hw_init(gsw);
++
++	gsw_w32(gsw, ~PORT_IRQ_ST_CHG, GSW_REG_IMR);
++	request_irq(gsw->irq, gsw_interrupt, 0, "gsw", priv);
++
++	return 0;
++}
+diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.h b/drivers/net/ethernet/ralink/gsw_mt7620a.h
+new file mode 100644
+index 0000000..fd4add5
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.h
+@@ -0,0 +1,29 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_GSW_MT7620_H__
++#define _RALINK_GSW_MT7620_H__
++
++extern int mt7620_gsw_probe(struct fe_priv *priv);
++extern void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac);
++extern int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++extern int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
++extern void mt7620_mdio_link_adjust(struct fe_priv *priv, int port);
++extern void mt7620_port_init(struct fe_priv *priv, struct device_node *np);
++extern int mt7620a_has_carrier(struct fe_priv *priv);
++
++#endif
+diff --git a/drivers/net/ethernet/ralink/mdio.c b/drivers/net/ethernet/ralink/mdio.c
+new file mode 100644
+index 0000000..b265c75
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio.c
+@@ -0,0 +1,245 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/phy.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio.h"
++
++static int fe_mdio_reset(struct mii_bus *bus)
++{
++	/* TODO */
++	return 0;
++}
++
++static void fe_phy_link_adjust(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	unsigned long flags;
++	int i;
++
++	spin_lock_irqsave(&priv->phy->lock, flags);
++	for (i = 0; i < 8; i++) {
++		if (priv->phy->phy_node[i]) {
++			struct phy_device *phydev = priv->phy->phy[i];
++			int status_change = 0;
++
++			if (phydev->link)
++				if (priv->phy->duplex[i] != phydev->duplex ||
++						priv->phy->speed[i] != phydev->speed)
++					status_change = 1;
++
++			if (phydev->link != priv->link[i])
++				status_change = 1;
++
++			switch (phydev->speed) {
++			case SPEED_1000:
++			case SPEED_100:
++			case SPEED_10:
++				priv->link[i] = phydev->link;
++				priv->phy->duplex[i] = phydev->duplex;
++				priv->phy->speed[i] = phydev->speed;
++
++				if (status_change && priv->soc->mdio_adjust_link)
++					priv->soc->mdio_adjust_link(priv, i);
++				break;
++			}
++		}
++	}
++	spin_unlock_irqrestore(&priv->phy->lock, flags);
++}
++
++int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node)
++{
++	const __be32 *_port = NULL;
++	struct phy_device *phydev;
++	int phy_mode, port;
++
++	_port = of_get_property(phy_node, "reg", NULL);
++
++	if (!_port || (be32_to_cpu(*_port) >= 8)) {
++		pr_err("%s: invalid port id\n", phy_node->name);
++		return -EINVAL;
++	}
++	port = be32_to_cpu(*_port);
++	phy_mode = of_get_phy_mode(phy_node);
++	if (phy_mode < 0) {
++		dev_err(priv->device, "incorrect phy-mode %d\n", phy_mode);
++		priv->phy->phy_node[port] = NULL;
++		return -EINVAL;
++	}
++
++	phydev = of_phy_connect(priv->netdev, phy_node, fe_phy_link_adjust,
++				0, phy_mode);
++	if (IS_ERR(phydev)) {
++		dev_err(priv->device, "could not connect to PHY\n");
++		priv->phy->phy_node[port] = NULL;
++		return PTR_ERR(phydev);
++	}
++
++	phydev->supported &= PHY_GBIT_FEATURES;
++	phydev->advertising = phydev->supported;
++	phydev->no_auto_carrier_off = 1;
++
++	dev_info(priv->device,
++		 "connected port %d to PHY at %s [uid=%08x, driver=%s]\n",
++		 port, dev_name(&phydev->dev), phydev->phy_id,
++		 phydev->drv->name);
++
++	priv->phy->phy[port] = phydev;
++	priv->link[port] = 0;
++
++	return 0;
++}
++
++static int fe_phy_connect(struct fe_priv *priv)
++{
++	return 0;
++}
++
++static void fe_phy_disconnect(struct fe_priv *priv)
++{
++	unsigned long flags;
++	int i;
++
++	for (i = 0; i < 8; i++)
++		if (priv->phy->phy_fixed[i]) {
++			spin_lock_irqsave(&priv->phy->lock, flags);
++			priv->link[i] = 0;
++			if (priv->soc->mdio_adjust_link)
++				priv->soc->mdio_adjust_link(priv, i);
++			spin_unlock_irqrestore(&priv->phy->lock, flags);
++		} else if (priv->phy->phy[i]) {
++			phy_disconnect(priv->phy->phy[i]);
++		}
++}
++
++static void fe_phy_start(struct fe_priv *priv)
++{
++	unsigned long flags;
++	int i;
++
++	for (i = 0; i < 8; i++) {
++		if (priv->phy->phy_fixed[i]) {
++			spin_lock_irqsave(&priv->phy->lock, flags);
++			priv->link[i] = 1;
++			if (priv->soc->mdio_adjust_link)
++				priv->soc->mdio_adjust_link(priv, i);
++			spin_unlock_irqrestore(&priv->phy->lock, flags);
++		} else if (priv->phy->phy[i]) {
++			phy_start(priv->phy->phy[i]);
++		}
++	}
++}
++
++static void fe_phy_stop(struct fe_priv *priv)
++{
++	unsigned long flags;
++	int i;
++
++	for (i = 0; i < 8; i++)
++		if (priv->phy->phy_fixed[i]) {
++			spin_lock_irqsave(&priv->phy->lock, flags);
++			priv->link[i] = 0;
++			if (priv->soc->mdio_adjust_link)
++				priv->soc->mdio_adjust_link(priv, i);
++			spin_unlock_irqrestore(&priv->phy->lock, flags);
++		} else if (priv->phy->phy[i]) {
++			phy_stop(priv->phy->phy[i]);
++		}
++}
++
++static struct fe_phy phy_ralink = {
++	.connect = fe_phy_connect,
++	.disconnect = fe_phy_disconnect,
++	.start = fe_phy_start,
++	.stop = fe_phy_stop,
++};
++
++int fe_mdio_init(struct fe_priv *priv)
++{
++	struct device_node *mii_np;
++	int err;
++
++	if (!priv->soc->mdio_read || !priv->soc->mdio_write)
++		return 0;
++
++	spin_lock_init(&phy_ralink.lock);
++	priv->phy = &phy_ralink;
++
++	mii_np = of_get_child_by_name(priv->device->of_node, "mdio-bus");
++	if (!mii_np) {
++		dev_err(priv->device, "no %s child node found", "mdio-bus");
++		return -ENODEV;
++	}
++
++	if (!of_device_is_available(mii_np)) {
++		err = 0;
++		goto err_put_node;
++	}
++
++	priv->mii_bus = mdiobus_alloc();
++	if (priv->mii_bus == NULL) {
++		err = -ENOMEM;
++		goto err_put_node;
++	}
++
++	priv->mii_bus->name = "mdio";
++	priv->mii_bus->read = priv->soc->mdio_read;
++	priv->mii_bus->write = priv->soc->mdio_write;
++	priv->mii_bus->reset = fe_mdio_reset;
++	priv->mii_bus->irq = priv->mii_irq;
++	priv->mii_bus->priv = priv;
++	priv->mii_bus->parent = priv->device;
++
++	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name);
++	err = of_mdiobus_register(priv->mii_bus, mii_np);
++	if (err)
++		goto err_free_bus;
++
++	return 0;
++
++err_free_bus:
++	kfree(priv->mii_bus);
++err_put_node:
++	of_node_put(mii_np);
++	priv->mii_bus = NULL;
++	return err;
++}
++
++void fe_mdio_cleanup(struct fe_priv *priv)
++{
++	if (!priv->mii_bus)
++		return;
++
++	mdiobus_unregister(priv->mii_bus);
++	of_node_put(priv->mii_bus->dev.of_node);
++	kfree(priv->mii_bus);
++}
+diff --git a/drivers/net/ethernet/ralink/mdio.h b/drivers/net/ethernet/ralink/mdio.h
+new file mode 100644
+index 0000000..c3910a0
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio.h
+@@ -0,0 +1,29 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_MDIO_H__
++#define _RALINK_MDIO_H__
++
++#ifdef CONFIG_NET_RALINK_MDIO
++extern int fe_mdio_init(struct fe_priv *priv);
++extern void fe_mdio_cleanup(struct fe_priv *priv);
++extern int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node);
++#else
++static inline int fe_mdio_init(struct fe_priv *priv) { return 0; }
++static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
++#endif
++#endif
+diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.c b/drivers/net/ethernet/ralink/mdio_rt2880.c
+new file mode 100644
+index 0000000..54dbc53
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio_rt2880.c
+@@ -0,0 +1,163 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/phy.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio_rt2880.h"
++
++#define FE_MDIO_RETRY	1000
++
++static unsigned char *rt2880_speed_str(struct fe_priv *priv)
++{
++	switch (priv->phy->speed[0]) {
++	case SPEED_1000:
++		return "1000";
++	case SPEED_100:
++		return "100";
++	case SPEED_10:
++		return "10";
++	}
++
++	return "?";
++}
++
++void rt2880_mdio_link_adjust(struct fe_priv *priv)
++{
++	u32 mdio_cfg;
++
++	if (!priv->link[0]) {
++		netif_carrier_off(priv->netdev);
++		netdev_info(priv->netdev, "link down\n");
++		return;
++	}
++
++	mdio_cfg = FE_MDIO_CFG_TX_CLK_SKEW_200 |
++		   FE_MDIO_CFG_RX_CLK_SKEW_200 |
++		   FE_MDIO_CFG_GP1_FRC_EN;
++
++	if (priv->phy->duplex[0] == DUPLEX_FULL)
++		mdio_cfg |= FE_MDIO_CFG_GP1_DUPLEX;
++
++	if (priv->phy->tx_fc)
++		mdio_cfg |= FE_MDIO_CFG_GP1_FC_TX;
++
++	if (priv->phy->rx_fc)
++		mdio_cfg |= FE_MDIO_CFG_GP1_FC_RX;
++
++	switch (priv->phy->speed[0]) {
++	case SPEED_10:
++		mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_10;
++		break;
++	case SPEED_100:
++		mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_100;
++		break;
++	case SPEED_1000:
++		mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_1000;
++		break;
++	default:
++		BUG();
++	}
++
++	fe_w32(mdio_cfg, FE_MDIO_CFG);
++
++	netif_carrier_on(priv->netdev);
++	netdev_info(priv->netdev, "link up (%sMbps/%s duplex)\n",
++		    rt2880_speed_str(priv),
++		    (DUPLEX_FULL == priv->phy->duplex[0]) ? "Full" : "Half");
++}
++
++static int rt2880_mdio_wait_ready(struct fe_priv *priv)
++{
++	int retries;
++
++	retries = FE_MDIO_RETRY;
++	while (1) {
++		u32 t;
++
++		t = fe_r32(FE_MDIO_ACCESS);
++		if ((t & (0x1 << 31)) == 0)
++			return 0;
++
++		if (retries-- == 0)
++			break;
++
++		udelay(1);
++	}
++
++	dev_err(priv->device, "MDIO operation timed out\n");
++	return -ETIMEDOUT;
++}
++
++int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++	struct fe_priv *priv = bus->priv;
++	int err;
++	u32 t;
++
++	err = rt2880_mdio_wait_ready(priv);
++	if (err)
++		return 0xffff;
++
++	t = (phy_addr << 24) | (phy_reg << 16);
++	fe_w32(t, FE_MDIO_ACCESS);
++	t |= (1 << 31);
++	fe_w32(t, FE_MDIO_ACCESS);
++
++	err = rt2880_mdio_wait_ready(priv);
++	if (err)
++		return 0xffff;
++
++	pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
++		phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
++
++	return fe_r32(FE_MDIO_ACCESS) & 0xffff;
++}
++
++int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
++{
++	struct fe_priv *priv = bus->priv;
++	int err;
++	u32 t;
++
++	pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
++		phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
++
++	err = rt2880_mdio_wait_ready(priv);
++	if (err)
++		return err;
++
++	t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val;
++	fe_w32(t, FE_MDIO_ACCESS);
++	t |= (1 << 31);
++	fe_w32(t, FE_MDIO_ACCESS);
++
++	return rt2880_mdio_wait_ready(priv);
++}
+diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.h b/drivers/net/ethernet/ralink/mdio_rt2880.h
+new file mode 100644
+index 0000000..c9ac0fe
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio_rt2880.h
+@@ -0,0 +1,25 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_MDIO_RT2880_H__
++#define _RALINK_MDIO_RT2880_H__
++
++void rt2880_mdio_link_adjust(struct fe_priv *priv);
++int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
++int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++
++#endif
+diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.c b/drivers/net/ethernet/ralink/ralink_soc_eth.c
+new file mode 100644
+index 0000000..04e82eb
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
+@@ -0,0 +1,759 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++#include <linux/if_vlan.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "esw_rt3052.h"
++#include "mdio.h"
++
++#define TX_TIMEOUT		(20 * HZ / 100)
++#define	MAX_RX_LENGTH		1536
++
++static const u32 fe_reg_table_default[FE_REG_COUNT] = {
++	[FE_REG_PDMA_GLO_CFG] = FE_PDMA_GLO_CFG,
++	[FE_REG_PDMA_RST_CFG] = FE_PDMA_RST_CFG,
++	[FE_REG_DLY_INT_CFG] = FE_DLY_INT_CFG,
++	[FE_REG_TX_BASE_PTR0] = FE_TX_BASE_PTR0,
++	[FE_REG_TX_MAX_CNT0] = FE_TX_MAX_CNT0,
++	[FE_REG_TX_CTX_IDX0] = FE_TX_CTX_IDX0,
++	[FE_REG_RX_BASE_PTR0] = FE_RX_BASE_PTR0,
++	[FE_REG_RX_MAX_CNT0] = FE_RX_MAX_CNT0,
++	[FE_REG_RX_CALC_IDX0] = FE_RX_CALC_IDX0,
++	[FE_REG_FE_INT_ENABLE] = FE_FE_INT_ENABLE,
++	[FE_REG_FE_INT_STATUS] = FE_FE_INT_STATUS,
++	[FE_REG_FE_DMA_VID_BASE] = FE_DMA_VID0,
++};
++
++static const u32 *fe_reg_table = fe_reg_table_default;
++
++static void __iomem *fe_base = 0;
++
++void fe_w32(u32 val, unsigned reg)
++{
++	__raw_writel(val, fe_base + reg);
++}
++
++u32 fe_r32(unsigned reg)
++{
++	return __raw_readl(fe_base + reg);
++}
++
++static inline void fe_reg_w32(u32 val, enum fe_reg reg)
++{
++	fe_w32(val, fe_reg_table[reg]);
++}
++
++static inline u32 fe_reg_r32(enum fe_reg reg)
++{
++	return fe_r32(fe_reg_table[reg]);
++}
++
++static inline void fe_int_disable(u32 mask)
++{
++	fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) & ~mask,
++		     FE_REG_FE_INT_ENABLE);
++	/* flush write */
++	fe_reg_r32(FE_REG_FE_INT_ENABLE);
++}
++
++static inline void fe_int_enable(u32 mask)
++{
++	fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) | mask,
++		     FE_REG_FE_INT_ENABLE);
++	/* flush write */
++	fe_reg_r32(FE_REG_FE_INT_ENABLE);
++}
++
++static inline void fe_hw_set_macaddr(struct fe_priv *priv, unsigned char *mac)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	fe_w32((mac[0] << 8) | mac[1], FE_GDMA1_MAC_ADRH);
++	fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++		     FE_GDMA1_MAC_ADRL);
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static int fe_set_mac_address(struct net_device *dev, void *p)
++{
++	int ret = eth_mac_addr(dev, p);
++
++	if (!ret) {
++		struct fe_priv *priv = netdev_priv(dev);
++
++		if (priv->soc->set_mac)
++			priv->soc->set_mac(priv, dev->dev_addr);
++		else
++			fe_hw_set_macaddr(priv, p);
++	}
++
++	return ret;
++}
++
++static struct sk_buff* fe_alloc_skb(struct fe_priv *priv)
++{
++	struct sk_buff *skb;
++
++	skb = netdev_alloc_skb(priv->netdev, MAX_RX_LENGTH + NET_IP_ALIGN);
++	if (!skb)
++		return NULL;
++
++	skb_reserve(skb, NET_IP_ALIGN);
++
++	return skb;
++}
++
++static int fe_alloc_rx(struct fe_priv *priv)
++{
++	int size = NUM_DMA_DESC * sizeof(struct fe_rx_dma);
++	int i;
++
++	priv->rx_dma = dma_alloc_coherent(&priv->netdev->dev, size,
++					&priv->rx_phys, GFP_ATOMIC);
++	if (!priv->rx_dma)
++		return -ENOMEM;
++
++	memset(priv->rx_dma, 0, size);
++
++	for (i = 0; i < NUM_DMA_DESC; i++) {
++		priv->rx_skb[i] = fe_alloc_skb(priv);
++		if (!priv->rx_skb[i])
++			return -ENOMEM;
++	}
++
++	for (i = 0; i < NUM_DMA_DESC; i++) {
++		dma_addr_t dma_addr = dma_map_single(&priv->netdev->dev,
++						priv->rx_skb[i]->data,
++						MAX_RX_LENGTH,
++						DMA_FROM_DEVICE);
++		priv->rx_dma[i].rxd1 = (unsigned int) dma_addr;
++
++		if (priv->soc->rx_dma)
++			priv->soc->rx_dma(priv, i, MAX_RX_LENGTH);
++		else
++			priv->rx_dma[i].rxd2 = RX_DMA_LSO;
++	}
++	wmb();
++
++	fe_reg_w32(priv->rx_phys, FE_REG_RX_BASE_PTR0);
++	fe_reg_w32(NUM_DMA_DESC, FE_REG_RX_MAX_CNT0);
++	fe_reg_w32((NUM_DMA_DESC - 1), FE_REG_RX_CALC_IDX0);
++	fe_reg_w32(FE_PST_DRX_IDX0, FE_REG_PDMA_RST_CFG);
++
++	return 0;
++}
++
++static int fe_alloc_tx(struct fe_priv *priv)
++{
++	int size = NUM_DMA_DESC * sizeof(struct fe_tx_dma);
++	int i;
++
++	priv->tx_free_idx = 0;
++
++	priv->tx_dma = dma_alloc_coherent(&priv->netdev->dev, size,
++					&priv->tx_phys, GFP_ATOMIC);
++	if (!priv->tx_dma)
++		return -ENOMEM;
++
++	memset(priv->tx_dma, 0, size);
++
++	for (i = 0; i < NUM_DMA_DESC; i++) {
++		if (priv->soc->tx_dma) {
++			priv->soc->tx_dma(priv, i, 0);
++			continue;
++		}
++
++		priv->tx_dma[i].txd2 = TX_DMA_LSO | TX_DMA_DONE;
++		priv->tx_dma[i].txd4 = TX_DMA_QN(3) | TX_DMA_PN(1);
++	}
++
++	fe_reg_w32(priv->tx_phys, FE_REG_TX_BASE_PTR0);
++	fe_reg_w32(NUM_DMA_DESC, FE_REG_TX_MAX_CNT0);
++	fe_reg_w32(0, FE_REG_TX_CTX_IDX0);
++	fe_reg_w32(FE_PST_DTX_IDX0, FE_REG_PDMA_RST_CFG);
++
++	return 0;
++}
++
++static void fe_free_dma(struct fe_priv *priv)
++{
++	int i;
++
++	for (i = 0; i < NUM_DMA_DESC; i++) {
++		if (priv->rx_skb[i]) {
++			dma_unmap_single(&priv->netdev->dev, priv->rx_dma[i].rxd1,
++						MAX_RX_LENGTH, DMA_FROM_DEVICE);
++			dev_kfree_skb_any(priv->rx_skb[i]);
++			priv->rx_skb[i] = NULL;
++		}
++
++		if (priv->tx_skb[i]) {
++			dev_kfree_skb_any(priv->tx_skb[i]);
++			priv->tx_skb[i] = NULL;
++		}
++	}
++
++	if (priv->rx_dma) {
++		int size = NUM_DMA_DESC * sizeof(struct fe_rx_dma);
++		dma_free_coherent(&priv->netdev->dev, size, priv->rx_dma,
++					priv->rx_phys);
++	}
++
++	if (priv->tx_dma) {
++		int size = NUM_DMA_DESC * sizeof(struct fe_tx_dma);
++		dma_free_coherent(&priv->netdev->dev, size, priv->tx_dma,
++					priv->tx_phys);
++	}
++
++	netdev_reset_queue(priv->netdev);
++}
++
++static int fe_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	dma_addr_t mapped_addr;
++	u32 tx_next;
++	u32 tx;
++
++	if (priv->soc->min_pkt_len) {
++		if (skb->len < priv->soc->min_pkt_len) {
++			if (skb_padto(skb, priv->soc->min_pkt_len)) {
++				printk(KERN_ERR
++				       "fe_eth: skb_padto failed\n");
++				kfree_skb(skb);
++				return 0;
++			}
++			skb_put(skb, priv->soc->min_pkt_len - skb->len);
++		}
++	}
++
++	dev->trans_start = jiffies;
++	mapped_addr = dma_map_single(&priv->netdev->dev, skb->data,
++				skb->len, DMA_TO_DEVICE);
++
++	spin_lock(&priv->page_lock);
++
++	tx = fe_reg_r32(FE_REG_TX_CTX_IDX0);
++	tx_next = (tx + 1) % NUM_DMA_DESC;
++
++	if ((priv->tx_skb[tx]) || (priv->tx_skb[tx_next]) ||
++			!(priv->tx_dma[tx].txd2 & TX_DMA_DONE) ||
++			!(priv->tx_dma[tx_next].txd2 & TX_DMA_DONE))
++	{
++		spin_unlock(&priv->page_lock);
++		dev->stats.tx_dropped++;
++		kfree_skb(skb);
++
++		return NETDEV_TX_OK;
++	}
++
++	priv->tx_skb[tx] = skb;
++	priv->tx_dma[tx].txd1 = (unsigned int) mapped_addr;
++	wmb();
++	if (priv->soc->tx_dma)
++		priv->soc->tx_dma(priv, tx, skb->len);
++	else
++		priv->tx_dma[tx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(skb->len);
++
++	if (skb->ip_summed == CHECKSUM_PARTIAL)
++		priv->tx_dma[tx].txd4 |= TX_DMA_CHKSUM;
++	else
++		priv->tx_dma[tx].txd4 &= ~TX_DMA_CHKSUM;
++
++        if (fe_reg_table[FE_REG_FE_DMA_VID_BASE] && vlan_tx_tag_present(skb))
++		priv->tx_dma[tx].txd4 |= 0x80 | (vlan_tx_tag_get(skb) >> 13) << 4 | (vlan_tx_tag_get(skb) & 0xF);
++	else
++		priv->tx_dma[tx].txd4 &= ~0x80;
++
++	dev->stats.tx_packets++;
++	dev->stats.tx_bytes += skb->len;
++
++	fe_reg_w32(tx_next, FE_REG_TX_CTX_IDX0);
++	netdev_sent_queue(dev, skb->len);
++
++	spin_unlock(&priv->page_lock);
++
++	return NETDEV_TX_OK;
++}
++
++static int fe_poll_rx(struct napi_struct *napi, int budget)
++{
++	struct fe_priv *priv = container_of(napi, struct fe_priv, rx_napi);
++	int idx = fe_reg_r32(FE_REG_RX_CALC_IDX0);
++	unsigned long flags;
++	int complete = 0;
++	int rx = 0;
++
++	while ((rx < budget) && !complete) {
++
++		idx = (idx + 1) % NUM_DMA_DESC;
++
++		if (priv->rx_dma[idx].rxd2 & RX_DMA_DONE) {
++			struct sk_buff *new_skb = fe_alloc_skb(priv);
++
++			if (new_skb) {
++				int pktlen = RX_DMA_PLEN0(priv->rx_dma[idx].rxd2);
++				dma_addr_t dma_addr;
++
++				dma_unmap_single(&priv->netdev->dev, priv->rx_dma[idx].rxd1,
++						MAX_RX_LENGTH, DMA_FROM_DEVICE);
++
++				skb_put(priv->rx_skb[idx], pktlen);
++				priv->rx_skb[idx]->dev = priv->netdev;
++				priv->rx_skb[idx]->protocol = eth_type_trans(priv->rx_skb[idx], priv->netdev);
++				if (priv->rx_dma[idx].rxd4 & priv->soc->checksum_bit)
++					priv->rx_skb[idx]->ip_summed = CHECKSUM_UNNECESSARY;
++				else
++					priv->rx_skb[idx]->ip_summed = CHECKSUM_NONE;
++				priv->netdev->stats.rx_packets++;
++				priv->netdev->stats.rx_bytes += pktlen;
++				netif_rx(priv->rx_skb[idx]);
++
++				priv->rx_skb[idx] = new_skb;
++
++				dma_addr = dma_map_single(&priv->netdev->dev,
++						  new_skb->data,
++						  MAX_RX_LENGTH,
++						  DMA_FROM_DEVICE);
++				priv->rx_dma[idx].rxd1 = (unsigned int) dma_addr;
++				wmb();
++			} else {
++				priv->netdev->stats.rx_dropped++;
++			}
++
++			if (priv->soc->rx_dma)
++				priv->soc->rx_dma(priv, idx, MAX_RX_LENGTH);
++			else
++				priv->rx_dma[idx].rxd2 = RX_DMA_LSO;
++			fe_reg_w32(idx, FE_REG_RX_CALC_IDX0);
++			rx++;
++		} else {
++			complete = 1;
++		}
++	}
++
++	if (complete || !rx) {
++		napi_complete(&priv->rx_napi);
++		spin_lock_irqsave(&priv->page_lock, flags);
++		fe_int_enable(priv->soc->rx_dly_int);
++		spin_unlock_irqrestore(&priv->page_lock, flags);
++	}
++
++	return rx;
++}
++
++static int fe_poll_tx(struct napi_struct *napi, int budget)
++{
++	struct fe_priv *priv = container_of(napi, struct fe_priv, tx_napi);
++	unsigned int bytes_compl = 0;
++	unsigned int pkts_compl = 0;
++	struct netdev_queue *txq;
++	unsigned long flags;
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	while (pkts_compl < budget) {
++		struct fe_tx_dma *txd;
++
++		txd = &priv->tx_dma[priv->tx_free_idx];
++
++		if (!(txd->txd2 & TX_DMA_DONE) || !(priv->tx_skb[priv->tx_free_idx]))
++			break;
++
++		bytes_compl += priv->tx_skb[priv->tx_free_idx]->len;
++		pkts_compl++;
++
++		dev_kfree_skb_irq(priv->tx_skb[priv->tx_free_idx]);
++		priv->tx_skb[priv->tx_free_idx] = NULL;
++		priv->tx_free_idx++;
++		if (priv->tx_free_idx >= NUM_DMA_DESC)
++			priv->tx_free_idx = 0;
++	}
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++
++	txq = netdev_get_tx_queue(priv->netdev, 0);
++	if (netif_tx_queue_stopped(txq))
++		netif_tx_start_queue(txq);
++
++	napi_complete(napi);
++	netdev_completed_queue(priv->netdev, pkts_compl, bytes_compl);
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	fe_int_enable(priv->soc->tx_dly_int);
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++
++	return pkts_compl;
++}
++
++static void fe_tx_timeout(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++
++	priv->netdev->stats.tx_errors++;
++	netdev_err(dev, "transmit timed out, waking up the queue\n");
++	netif_wake_queue(dev);
++}
++
++static irqreturn_t fe_handle_irq(int irq, void *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	unsigned int status;
++	unsigned int mask;
++
++	status = fe_reg_r32(FE_REG_FE_INT_STATUS);
++	mask = fe_reg_r32(FE_REG_FE_INT_ENABLE);
++
++	if (!(status & mask))
++		return IRQ_NONE;
++
++	if (status & priv->soc->rx_dly_int) {
++		fe_int_disable(priv->soc->rx_dly_int);
++		napi_schedule(&priv->rx_napi);
++	}
++
++	if (status & priv->soc->tx_dly_int) {
++		fe_int_disable(priv->soc->tx_dly_int);
++		napi_schedule(&priv->tx_napi);
++	}
++
++	fe_reg_w32(status, FE_REG_FE_INT_STATUS);
++
++	return IRQ_HANDLED;
++}
++
++static int fe_hw_init(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	int err, i;
++
++	err = devm_request_irq(priv->device, dev->irq, fe_handle_irq, 0,
++				dev_name(priv->device), dev);
++	if (err)
++		return err;
++
++	err = fe_alloc_rx(priv);
++	if (!err)
++		err = fe_alloc_tx(priv);
++	if (err)
++		return err;
++
++	if (priv->soc->set_mac)
++		priv->soc->set_mac(priv, dev->dev_addr);
++	else
++		fe_hw_set_macaddr(priv, dev->dev_addr);
++
++	fe_reg_w32(FE_DELAY_INIT, FE_REG_DLY_INT_CFG);
++
++	fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
++
++
++	if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
++		for (i = 0; i < 16; i += 2)
++			fe_w32((i + 1) << 16 | i, fe_reg_table[FE_REG_FE_DMA_VID_BASE] + (i * 4));
++
++	if (priv->soc->fwd_config) {
++		priv->soc->fwd_config(priv);
++	} else {
++		unsigned long sysclk = priv->sysclk;
++
++		if (!sysclk) {
++			netdev_err(dev, "unable to get clock\n");
++			return -EINVAL;
++		}
++
++		sysclk /= FE_US_CYC_CNT_DIVISOR;
++		sysclk <<= FE_US_CYC_CNT_SHIFT;
++
++		fe_w32((fe_r32(FE_FE_GLO_CFG) &
++			~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) | priv->sysclk,
++			FE_FE_GLO_CFG);
++
++		fe_w32(fe_r32(FE_GDMA1_FWD_CFG) & ~0xffff, FE_GDMA1_FWD_CFG);
++		fe_w32(fe_r32(FE_GDMA1_FWD_CFG) | (FE_GDM1_ICS_EN | FE_GDM1_TCS_EN | FE_GDM1_UCS_EN),
++			FE_GDMA1_FWD_CFG);
++		fe_w32(fe_r32(FE_CDMA_CSG_CFG) | (FE_ICS_GEN_EN | FE_TCS_GEN_EN | FE_UCS_GEN_EN),
++			FE_CDMA_CSG_CFG);
++		fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
++	}
++
++	fe_w32(1, FE_FE_RST_GL);
++	fe_w32(0, FE_FE_RST_GL);
++
++	return 0;
++}
++
++static int fe_open(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	unsigned long flags;
++	u32 val;
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	napi_enable(&priv->rx_napi);
++	napi_enable(&priv->tx_napi);
++
++	val = FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN;
++	val |= priv->soc->pdma_glo_cfg;
++	fe_reg_w32(val, FE_REG_PDMA_GLO_CFG);
++
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++
++	if (priv->phy)
++		priv->phy->start(priv);
++
++	if (priv->soc->has_carrier && priv->soc->has_carrier(priv))
++		netif_carrier_on(dev);
++
++	netif_start_queue(dev);
++	fe_int_enable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
++
++	return 0;
++}
++
++static int fe_stop(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	unsigned long flags;
++
++	fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
++
++	netif_stop_queue(dev);
++
++	if (priv->phy)
++		priv->phy->stop(priv);
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	napi_disable(&priv->rx_napi);
++	napi_disable(&priv->tx_napi);
++
++	fe_reg_w32(fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
++		     ~(FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN),
++		     FE_REG_PDMA_GLO_CFG);
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++
++	return 0;
++}
++
++static int __init fe_init(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	struct device_node *port;
++	int err;
++
++	BUG_ON(!priv->soc->reset_fe);
++	priv->soc->reset_fe();
++
++	if (priv->soc->switch_init)
++		priv->soc->switch_init(priv);
++
++	net_srandom(jiffies);
++	memcpy(dev->dev_addr, priv->soc->mac, ETH_ALEN);
++	of_get_mac_address_mtd(priv->device->of_node, dev->dev_addr);
++
++	err = fe_mdio_init(priv);
++	if (err)
++		return err;
++
++	if (priv->phy) {
++		err = priv->phy->connect(priv);
++		if (err)
++			goto err_mdio_cleanup;
++	}
++
++	if (priv->soc->port_init)
++		for_each_child_of_node(priv->device->of_node, port)
++			if (of_device_is_compatible(port, "ralink,eth-port"))
++				priv->soc->port_init(priv, port);
++
++	err = fe_hw_init(dev);
++	if (err)
++		goto err_phy_disconnect;
++
++	return 0;
++
++err_phy_disconnect:
++	if (priv->phy)
++		priv->phy->disconnect(priv);
++err_mdio_cleanup:
++	fe_mdio_cleanup(priv);
++
++	return err;
++}
++
++static void fe_uninit(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++
++	if (priv->phy)
++		priv->phy->disconnect(priv);
++	fe_mdio_cleanup(priv);
++
++	fe_reg_w32(0, FE_REG_FE_INT_ENABLE);
++	free_irq(dev->irq, dev);
++
++	fe_free_dma(priv);
++}
++
++static const struct net_device_ops fe_netdev_ops = {
++	.ndo_init		= fe_init,
++	.ndo_uninit		= fe_uninit,
++	.ndo_open		= fe_open,
++	.ndo_stop		= fe_stop,
++	.ndo_start_xmit		= fe_start_xmit,
++	.ndo_tx_timeout		= fe_tx_timeout,
++	.ndo_set_mac_address	= fe_set_mac_address,
++	.ndo_change_mtu		= eth_change_mtu,
++	.ndo_validate_addr	= eth_validate_addr,
++};
++
++static int fe_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	const struct of_device_id *match;
++	struct fe_soc_data *soc = NULL;
++	struct net_device *netdev;
++	struct fe_priv *priv;
++	struct clk *sysclk;
++	int err;
++
++	match = of_match_device(of_fe_match, &pdev->dev);
++	soc = (struct fe_soc_data *) match->data;
++	if (soc->reg_table)
++		fe_reg_table = soc->reg_table;
++
++	fe_base = devm_request_and_ioremap(&pdev->dev, res);
++	if (!fe_base)
++		return -ENOMEM;
++
++	netdev = alloc_etherdev(sizeof(struct fe_priv));
++	if (!netdev) {
++		dev_err(&pdev->dev, "alloc_etherdev failed\n");
++		return -ENOMEM;
++	}
++
++	strcpy(netdev->name, "eth%d");
++	netdev->netdev_ops = &fe_netdev_ops;
++	netdev->base_addr = (unsigned long) fe_base;
++	netdev->watchdog_timeo = TX_TIMEOUT;
++	netdev->features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
++	if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
++		netdev->features |= NETIF_F_HW_VLAN_TX;
++
++	netdev->irq = platform_get_irq(pdev, 0);
++	if (netdev->irq < 0) {
++		dev_err(&pdev->dev, "no IRQ resource found\n");
++		kfree(netdev);
++		return -ENXIO;
++	}
++
++	priv = netdev_priv(netdev);
++	memset(priv, 0, sizeof(struct fe_priv));
++	spin_lock_init(&priv->page_lock);
++
++	sysclk = devm_clk_get(&pdev->dev, NULL);
++	if (!IS_ERR(sysclk))
++		priv->sysclk = clk_get_rate(sysclk);
++
++	priv->netdev = netdev;
++	priv->device = &pdev->dev;
++	priv->soc = soc;
++
++	err = register_netdev(netdev);
++	if (err) {
++		dev_err(&pdev->dev, "error bringing up device\n");
++		kfree(netdev);
++		return err;
++	}
++
++	netif_napi_add(netdev, &priv->rx_napi, fe_poll_rx, 32);
++	netif_napi_add(netdev, &priv->tx_napi, fe_poll_tx, 8);
++
++        platform_set_drvdata(pdev, netdev);
++
++	netdev_info(netdev, "done loading\n");
++
++	return 0;
++}
++
++static int fe_remove(struct platform_device *pdev)
++{
++        struct net_device *dev = platform_get_drvdata(pdev);
++	struct fe_priv *priv = netdev_priv(dev);
++
++	netif_stop_queue(dev);
++	netif_napi_del(&priv->rx_napi);
++	netif_napi_del(&priv->tx_napi);
++
++	unregister_netdev(dev);
++	free_netdev(dev);
++
++	return 0;
++}
++
++static struct platform_driver fe_driver = {
++	.probe = fe_probe,
++	.remove = fe_remove,
++	.driver = {
++		.name = "ralink_soc_eth",
++		.owner = THIS_MODULE,
++		.of_match_table = of_fe_match,
++	},
++};
++
++static int __init init_rtfe(void)
++{
++	int ret;
++
++	ret = rtesw_init();
++	if (ret)
++		return ret;
++
++	ret = platform_driver_register(&fe_driver);
++	if (ret)
++		rtesw_exit();
++
++	return ret;
++}
++
++static void __exit exit_rtfe(void)
++{
++	platform_driver_unregister(&fe_driver);
++	rtesw_exit();
++}
++
++module_init(init_rtfe);
++module_exit(exit_rtfe);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
+diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.h b/drivers/net/ethernet/ralink/ralink_soc_eth.h
+new file mode 100644
+index 0000000..0c769ef
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.h
+@@ -0,0 +1,372 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   based on Ralink SDK3.3
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef FE_ETH_H
++#define FE_ETH_H
++
++#include <linux/mii.h>
++#include <linux/interrupt.h>
++#include <linux/netdevice.h>
++#include <linux/dma-mapping.h>
++#include <linux/phy.h>
++
++
++enum fe_reg {
++	FE_REG_PDMA_GLO_CFG = 0,
++	FE_REG_PDMA_RST_CFG,
++	FE_REG_DLY_INT_CFG,
++	FE_REG_TX_BASE_PTR0,
++	FE_REG_TX_MAX_CNT0,
++	FE_REG_TX_CTX_IDX0,
++	FE_REG_RX_BASE_PTR0,
++	FE_REG_RX_MAX_CNT0,
++	FE_REG_RX_CALC_IDX0,
++	FE_REG_FE_INT_ENABLE,
++	FE_REG_FE_INT_STATUS,
++	FE_REG_FE_DMA_VID_BASE,
++	FE_REG_COUNT
++};
++
++#define NUM_DMA_DESC		0x100
++
++#define FE_DELAY_EN_INT		0x80
++#define FE_DELAY_MAX_INT	0x04
++#define FE_DELAY_MAX_TOUT	0x04
++#define FE_DELAY_CHAN		(((FE_DELAY_EN_INT | FE_DELAY_MAX_INT) << 8) | FE_DELAY_MAX_TOUT)
++#define FE_DELAY_INIT		((FE_DELAY_CHAN << 16) | FE_DELAY_CHAN)
++#define FE_PSE_FQFC_CFG_INIT	0x80504000
++
++/* interrupt bits */
++#define FE_CNT_PPE_AF		BIT(31)
++#define FE_CNT_GDM_AF		BIT(29)
++#define FE_PSE_P2_FC		BIT(26)
++#define FE_PSE_BUF_DROP		BIT(24)
++#define FE_GDM_OTHER_DROP	BIT(23)
++#define FE_PSE_P1_FC		BIT(22)
++#define FE_PSE_P0_FC		BIT(21)
++#define FE_PSE_FQ_EMPTY		BIT(20)
++#define FE_GE1_STA_CHG		BIT(18)
++#define FE_TX_COHERENT		BIT(17)
++#define FE_RX_COHERENT		BIT(16)
++#define FE_TX_DONE_INT3		BIT(11)
++#define FE_TX_DONE_INT2		BIT(10)
++#define FE_TX_DONE_INT1		BIT(9)
++#define FE_TX_DONE_INT0		BIT(8)
++#define FE_RX_DONE_INT0		BIT(2)
++#define FE_TX_DLY_INT		BIT(1)
++#define FE_RX_DLY_INT		BIT(0)
++
++#define RT5350_RX_DLY_INT	BIT(30)
++#define RT5350_TX_DLY_INT	BIT(28)
++
++/* registers */
++#define FE_FE_OFFSET		0x0000
++#define FE_GDMA_OFFSET		0x0020
++#define FE_PSE_OFFSET		0x0040
++#define FE_GDMA2_OFFSET		0x0060
++#define FE_CDMA_OFFSET		0x0080
++#define FE_DMA_VID0		0x00a8
++#define FE_PDMA_OFFSET		0x0100
++#define FE_PPE_OFFSET		0x0200
++#define FE_CMTABLE_OFFSET	0x0400
++#define FE_POLICYTABLE_OFFSET	0x1000
++
++#define RT5350_PDMA_OFFSET	0x0800
++#define RT5350_SDM_OFFSET	0x0c00
++
++#define FE_MDIO_ACCESS		(FE_FE_OFFSET + 0x00)
++#define FE_MDIO_CFG		(FE_FE_OFFSET + 0x04)
++#define FE_FE_GLO_CFG		(FE_FE_OFFSET + 0x08)
++#define FE_FE_RST_GL		(FE_FE_OFFSET + 0x0C)
++#define FE_FE_INT_STATUS	(FE_FE_OFFSET + 0x10)
++#define FE_FE_INT_ENABLE	(FE_FE_OFFSET + 0x14)
++#define FE_MDIO_CFG2		(FE_FE_OFFSET + 0x18)
++#define FE_FOC_TS_T		(FE_FE_OFFSET + 0x1C)
++
++#define	FE_GDMA1_FWD_CFG	(FE_GDMA_OFFSET + 0x00)
++#define FE_GDMA1_SCH_CFG	(FE_GDMA_OFFSET + 0x04)
++#define FE_GDMA1_SHPR_CFG	(FE_GDMA_OFFSET + 0x08)
++#define FE_GDMA1_MAC_ADRL	(FE_GDMA_OFFSET + 0x0C)
++#define FE_GDMA1_MAC_ADRH	(FE_GDMA_OFFSET + 0x10)
++
++#define	FE_GDMA2_FWD_CFG	(FE_GDMA2_OFFSET + 0x00)
++#define FE_GDMA2_SCH_CFG	(FE_GDMA2_OFFSET + 0x04)
++#define FE_GDMA2_SHPR_CFG	(FE_GDMA2_OFFSET + 0x08)
++#define FE_GDMA2_MAC_ADRL	(FE_GDMA2_OFFSET + 0x0C)
++#define FE_GDMA2_MAC_ADRH	(FE_GDMA2_OFFSET + 0x10)
++
++#define FE_PSE_FQ_CFG		(FE_PSE_OFFSET + 0x00)
++#define FE_CDMA_FC_CFG		(FE_PSE_OFFSET + 0x04)
++#define FE_GDMA1_FC_CFG		(FE_PSE_OFFSET + 0x08)
++#define FE_GDMA2_FC_CFG		(FE_PSE_OFFSET + 0x0C)
++
++#define FE_CDMA_CSG_CFG		(FE_CDMA_OFFSET + 0x00)
++#define FE_CDMA_SCH_CFG		(FE_CDMA_OFFSET + 0x04)
++
++#define MT7620A_GDMA_OFFSET		0x0600
++#define	MT7620A_GDMA1_FWD_CFG		(MT7620A_GDMA_OFFSET + 0x00)
++#define MT7620A_FE_GDMA1_SCH_CFG	(MT7620A_GDMA_OFFSET + 0x04)
++#define MT7620A_FE_GDMA1_SHPR_CFG	(MT7620A_GDMA_OFFSET + 0x08)
++#define MT7620A_FE_GDMA1_MAC_ADRL	(MT7620A_GDMA_OFFSET + 0x0C)
++#define MT7620A_FE_GDMA1_MAC_ADRH	(MT7620A_GDMA_OFFSET + 0x10)
++
++#define RT5350_TX_BASE_PTR0	(RT5350_PDMA_OFFSET + 0x00)
++#define RT5350_TX_MAX_CNT0	(RT5350_PDMA_OFFSET + 0x04)
++#define RT5350_TX_CTX_IDX0	(RT5350_PDMA_OFFSET + 0x08)
++#define RT5350_TX_DTX_IDX0	(RT5350_PDMA_OFFSET + 0x0C)
++#define RT5350_TX_BASE_PTR1	(RT5350_PDMA_OFFSET + 0x10)
++#define RT5350_TX_MAX_CNT1	(RT5350_PDMA_OFFSET + 0x14)
++#define RT5350_TX_CTX_IDX1	(RT5350_PDMA_OFFSET + 0x18)
++#define RT5350_TX_DTX_IDX1	(RT5350_PDMA_OFFSET + 0x1C)
++#define RT5350_TX_BASE_PTR2	(RT5350_PDMA_OFFSET + 0x20)
++#define RT5350_TX_MAX_CNT2	(RT5350_PDMA_OFFSET + 0x24)
++#define RT5350_TX_CTX_IDX2	(RT5350_PDMA_OFFSET + 0x28)
++#define RT5350_TX_DTX_IDX2	(RT5350_PDMA_OFFSET + 0x2C)
++#define RT5350_TX_BASE_PTR3	(RT5350_PDMA_OFFSET + 0x30)
++#define RT5350_TX_MAX_CNT3	(RT5350_PDMA_OFFSET + 0x34)
++#define RT5350_TX_CTX_IDX3	(RT5350_PDMA_OFFSET + 0x38)
++#define RT5350_TX_DTX_IDX3	(RT5350_PDMA_OFFSET + 0x3C)
++#define RT5350_RX_BASE_PTR0	(RT5350_PDMA_OFFSET + 0x100)
++#define RT5350_RX_MAX_CNT0	(RT5350_PDMA_OFFSET + 0x104)
++#define RT5350_RX_CALC_IDX0	(RT5350_PDMA_OFFSET + 0x108)
++#define RT5350_RX_DRX_IDX0	(RT5350_PDMA_OFFSET + 0x10C)
++#define RT5350_RX_BASE_PTR1	(RT5350_PDMA_OFFSET + 0x110)
++#define RT5350_RX_MAX_CNT1	(RT5350_PDMA_OFFSET + 0x114)
++#define RT5350_RX_CALC_IDX1	(RT5350_PDMA_OFFSET + 0x118)
++#define RT5350_RX_DRX_IDX1	(RT5350_PDMA_OFFSET + 0x11C)
++#define RT5350_PDMA_GLO_CFG	(RT5350_PDMA_OFFSET + 0x204)
++#define RT5350_PDMA_RST_CFG	(RT5350_PDMA_OFFSET + 0x208)
++#define RT5350_DLY_INT_CFG	(RT5350_PDMA_OFFSET + 0x20c)
++#define RT5350_FE_INT_STATUS	(RT5350_PDMA_OFFSET + 0x220)
++#define RT5350_FE_INT_ENABLE	(RT5350_PDMA_OFFSET + 0x228)
++#define RT5350_PDMA_SCH_CFG	(RT5350_PDMA_OFFSET + 0x280)
++
++#define FE_PDMA_GLO_CFG		(FE_PDMA_OFFSET + 0x00)
++#define FE_PDMA_RST_CFG		(FE_PDMA_OFFSET + 0x04)
++#define FE_PDMA_SCH_CFG		(FE_PDMA_OFFSET + 0x08)
++#define FE_DLY_INT_CFG		(FE_PDMA_OFFSET + 0x0C)
++#define FE_TX_BASE_PTR0		(FE_PDMA_OFFSET + 0x10)
++#define FE_TX_MAX_CNT0		(FE_PDMA_OFFSET + 0x14)
++#define FE_TX_CTX_IDX0		(FE_PDMA_OFFSET + 0x18)
++#define FE_TX_DTX_IDX0		(FE_PDMA_OFFSET + 0x1C)
++#define FE_TX_BASE_PTR1		(FE_PDMA_OFFSET + 0x20)
++#define FE_TX_MAX_CNT1		(FE_PDMA_OFFSET + 0x24)
++#define FE_TX_CTX_IDX1		(FE_PDMA_OFFSET + 0x28)
++#define FE_TX_DTX_IDX1		(FE_PDMA_OFFSET + 0x2C)
++#define FE_RX_BASE_PTR0		(FE_PDMA_OFFSET + 0x30)
++#define FE_RX_MAX_CNT0		(FE_PDMA_OFFSET + 0x34)
++#define FE_RX_CALC_IDX0		(FE_PDMA_OFFSET + 0x38)
++#define FE_RX_DRX_IDX0		(FE_PDMA_OFFSET + 0x3C)
++#define FE_TX_BASE_PTR2		(FE_PDMA_OFFSET + 0x40)
++#define FE_TX_MAX_CNT2		(FE_PDMA_OFFSET + 0x44)
++#define FE_TX_CTX_IDX2		(FE_PDMA_OFFSET + 0x48)
++#define FE_TX_DTX_IDX2		(FE_PDMA_OFFSET + 0x4C)
++#define FE_TX_BASE_PTR3		(FE_PDMA_OFFSET + 0x50)
++#define FE_TX_MAX_CNT3		(FE_PDMA_OFFSET + 0x54)
++#define FE_TX_CTX_IDX3		(FE_PDMA_OFFSET + 0x58)
++#define FE_TX_DTX_IDX3		(FE_PDMA_OFFSET + 0x5C)
++#define FE_RX_BASE_PTR1		(FE_PDMA_OFFSET + 0x60)
++#define FE_RX_MAX_CNT1		(FE_PDMA_OFFSET + 0x64)
++#define FE_RX_CALC_IDX1		(FE_PDMA_OFFSET + 0x68)
++#define FE_RX_DRX_IDX1		(FE_PDMA_OFFSET + 0x6C)
++
++#define RT5350_SDM_CFG		(RT5350_SDM_OFFSET + 0x00)  //Switch DMA configuration
++#define RT5350_SDM_RRING	(RT5350_SDM_OFFSET + 0x04)  //Switch DMA Rx Ring
++#define RT5350_SDM_TRING	(RT5350_SDM_OFFSET + 0x08)  //Switch DMA Tx Ring
++#define RT5350_SDM_MAC_ADRL	(RT5350_SDM_OFFSET + 0x0C)  //Switch MAC address LSB
++#define RT5350_SDM_MAC_ADRH	(RT5350_SDM_OFFSET + 0x10)  //Switch MAC Address MSB
++#define RT5350_SDM_TPCNT	(RT5350_SDM_OFFSET + 0x100) //Switch DMA Tx packet count
++#define RT5350_SDM_TBCNT	(RT5350_SDM_OFFSET + 0x104) //Switch DMA Tx byte count
++#define RT5350_SDM_RPCNT	(RT5350_SDM_OFFSET + 0x108) //Switch DMA rx packet count
++#define RT5350_SDM_RBCNT	(RT5350_SDM_OFFSET + 0x10C) //Switch DMA rx byte count
++#define RT5350_SDM_CS_ERR	(RT5350_SDM_OFFSET + 0x110) //Switch DMA rx checksum error count
++
++#define RT5350_SDM_ICS_EN	BIT(16)
++#define RT5350_SDM_TCS_EN	BIT(17)
++#define RT5350_SDM_UCS_EN	BIT(18)
++
++
++/* MDIO_CFG register bits */
++#define FE_MDIO_CFG_AUTO_POLL_EN	BIT(29)
++#define FE_MDIO_CFG_GP1_BP_EN		BIT(16)
++#define FE_MDIO_CFG_GP1_FRC_EN		BIT(15)
++#define FE_MDIO_CFG_GP1_SPEED_10	(0 << 13)
++#define FE_MDIO_CFG_GP1_SPEED_100	(1 << 13)
++#define FE_MDIO_CFG_GP1_SPEED_1000	(2 << 13)
++#define FE_MDIO_CFG_GP1_DUPLEX		BIT(12)
++#define FE_MDIO_CFG_GP1_FC_TX		BIT(11)
++#define FE_MDIO_CFG_GP1_FC_RX		BIT(10)
++#define FE_MDIO_CFG_GP1_LNK_DWN		BIT(9)
++#define FE_MDIO_CFG_GP1_AN_FAIL		BIT(8)
++#define FE_MDIO_CFG_MDC_CLK_DIV_1	(0 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_2	(1 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_4	(2 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_8	(3 << 6)
++#define FE_MDIO_CFG_TURBO_MII_FREQ	BIT(5)
++#define FE_MDIO_CFG_TURBO_MII_MODE	BIT(4)
++#define FE_MDIO_CFG_RX_CLK_SKEW_0	(0 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_200	(1 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_400	(2 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_INV	(3 << 2)
++#define FE_MDIO_CFG_TX_CLK_SKEW_0	0
++#define FE_MDIO_CFG_TX_CLK_SKEW_200	1
++#define FE_MDIO_CFG_TX_CLK_SKEW_400	2
++#define FE_MDIO_CFG_TX_CLK_SKEW_INV	3
++
++/* uni-cast port */
++#define FE_GDM1_ICS_EN		BIT(22)
++#define FE_GDM1_TCS_EN		BIT(21)
++#define FE_GDM1_UCS_EN		BIT(20)
++#define FE_GDM1_JMB_EN		BIT(19)
++#define FE_GDM1_STRPCRC		BIT(16)
++#define FE_GDM1_UFRC_P_CPU	(0 << 12)
++#define FE_GDM1_UFRC_P_GDMA1	(1 << 12)
++#define FE_GDM1_UFRC_P_PPE	(6 << 12)
++
++/* checksums */
++#define FE_ICS_GEN_EN		BIT(2)
++#define FE_UCS_GEN_EN		BIT(1)
++#define FE_TCS_GEN_EN		BIT(0)
++
++/* dma ring */
++#define FE_PST_DRX_IDX0		BIT(16)
++#define FE_PST_DTX_IDX3		BIT(3)
++#define FE_PST_DTX_IDX2		BIT(2)
++#define FE_PST_DTX_IDX1		BIT(1)
++#define FE_PST_DTX_IDX0		BIT(0)
++
++#define FE_TX_WB_DDONE		BIT(6)
++#define FE_RX_DMA_BUSY		BIT(3)
++#define FE_TX_DMA_BUSY		BIT(1)
++#define FE_RX_DMA_EN		BIT(2)
++#define FE_TX_DMA_EN		BIT(0)
++
++#define FE_PDMA_SIZE_4DWORDS	(0 << 4)
++#define FE_PDMA_SIZE_8DWORDS	(1 << 4)
++#define FE_PDMA_SIZE_16DWORDS	(2 << 4)
++
++#define FE_US_CYC_CNT_MASK	0xff
++#define FE_US_CYC_CNT_SHIFT	0x8
++#define FE_US_CYC_CNT_DIVISOR	1000000
++
++#define RX_DMA_PLEN0(_x)	(((_x) >> 16) & 0x3fff)
++#define RX_DMA_LSO		BIT(30)
++#define RX_DMA_DONE		BIT(31)
++#define RX_DMA_L4VALID		BIT(30)
++
++struct fe_rx_dma {
++	unsigned int rxd1;
++	unsigned int rxd2;
++	unsigned int rxd3;
++	unsigned int rxd4;
++} __packed __aligned(4);
++
++#define TX_DMA_PLEN0_MASK	((0x3fff) << 16)
++#define TX_DMA_PLEN0(_x)	(((_x) & 0x3fff) << 16)
++#define TX_DMA_LSO		BIT(30)
++#define TX_DMA_DONE		BIT(31)
++#define TX_DMA_QN(_x)		((_x) << 16)
++#define TX_DMA_PN(_x)		((_x) << 24)
++#define TX_DMA_QN_MASK		TX_DMA_QN(0x7)
++#define TX_DMA_PN_MASK		TX_DMA_PN(0x7)
++#define TX_DMA_CHKSUM		(0x7 << 29)
++
++struct fe_tx_dma {
++	unsigned int txd1;
++	unsigned int txd2;
++	unsigned int txd3;
++	unsigned int txd4;
++} __packed __aligned(4);
++
++struct fe_priv;
++
++struct fe_phy {
++	struct phy_device	*phy[8];
++	struct device_node	*phy_node[8];
++	const __be32		*phy_fixed[8];
++	int			duplex[8];
++	int			speed[8];
++	spinlock_t		lock;
++
++	int (*connect)(struct fe_priv *priv);
++	void (*disconnect)(struct fe_priv *priv);
++	void (*start)(struct fe_priv *priv);
++	void (*stop)(struct fe_priv *priv);
++};
++
++struct fe_soc_data
++{
++	unsigned char mac[6];
++	const u32 *reg_table;
++
++	void (*reset_fe)(void);
++	void (*set_mac)(struct fe_priv *priv, unsigned char *mac);
++	void (*fwd_config)(struct fe_priv *priv);
++	void (*tx_dma)(struct fe_priv *priv, int idx, int len);
++	void (*rx_dma)(struct fe_priv *priv, int idx, int len);
++	int (*switch_init)(struct fe_priv *priv);
++	void (*port_init)(struct fe_priv *priv, struct device_node *port);
++	int (*has_carrier)(struct fe_priv *priv);
++	int (*mdio_init)(struct fe_priv *priv);
++	void (*mdio_cleanup)(struct fe_priv *priv);
++	int (*mdio_write)(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++	int (*mdio_read)(struct mii_bus *bus, int phy_addr, int phy_reg);
++	void (*mdio_adjust_link)(struct fe_priv *priv, int port);
++
++	void *swpriv;
++	u32 pdma_glo_cfg;
++	u32 rx_dly_int;
++	u32 tx_dly_int;
++	u32 checksum_bit;
++
++	int min_pkt_len;
++};
++
++struct fe_priv
++{
++	spinlock_t			page_lock;
++
++	struct fe_soc_data		*soc;
++	struct net_device		*netdev;
++	struct device			*device;
++	unsigned long			sysclk;
++
++	struct fe_rx_dma		*rx_dma;
++	struct sk_buff			*rx_skb[NUM_DMA_DESC];
++        struct napi_struct		rx_napi;
++	dma_addr_t			rx_phys;
++
++	struct fe_tx_dma		*tx_dma;
++	struct sk_buff			*tx_skb[NUM_DMA_DESC];
++        struct napi_struct		tx_napi;
++	dma_addr_t			tx_phys;
++	unsigned int			tx_free_idx;
++
++	struct fe_phy			*phy;
++	struct mii_bus			*mii_bus;
++	int				mii_irq[PHY_MAX_ADDR];
++
++	int				link[8];
++};
++
++extern const struct of_device_id of_fe_match[];
++
++void fe_w32(u32 val, unsigned reg);
++u32 fe_r32(unsigned reg);
++
++#endif /* FE_ETH_H */
+diff --git a/drivers/net/ethernet/ralink/soc_mt7620.c b/drivers/net/ethernet/ralink/soc_mt7620.c
+new file mode 100644
+index 0000000..55e303f
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_mt7620.c
+@@ -0,0 +1,111 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "gsw_mt7620a.h"
++
++#define MT7620A_CDMA_CSG_CFG	0x400
++#define MT7620_DMA_VID		(MT7620A_CDMA_CSG_CFG | 0x30)
++#define MT7620A_DMA_2B_OFFSET	BIT(31)
++#define MT7620A_RESET_FE	BIT(21)
++#define MT7620A_RESET_ESW	BIT(23)
++#define MT7620_L4_VALID		BIT(23)
++
++#define SYSC_REG_RESET_CTRL     0x34
++#define MAX_RX_LENGTH           1536
++
++#define CDMA_ICS_EN		BIT(2)
++#define CDMA_UCS_EN		BIT(1)
++#define CDMA_TCS_EN		BIT(0)
++
++#define GDMA_ICS_EN		BIT(22)
++#define GDMA_TCS_EN		BIT(21)
++#define GDMA_UCS_EN		BIT(20)
++
++static const u32 rt5350_reg_table[FE_REG_COUNT] = {
++	[FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
++	[FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
++	[FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
++	[FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
++	[FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
++	[FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
++	[FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
++	[FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
++	[FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
++	[FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
++	[FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
++	[FE_REG_FE_DMA_VID_BASE] = MT7620_DMA_VID,
++};
++
++static void mt7620_fe_reset(void)
++{
++	rt_sysc_w32(MT7620A_RESET_FE | MT7620A_RESET_ESW, SYSC_REG_RESET_CTRL);
++	rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
++}
++
++static void mt7620_fwd_config(struct fe_priv *priv)
++{
++	fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~7, MT7620A_GDMA1_FWD_CFG);
++	fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN | GDMA_TCS_EN | GDMA_UCS_EN), MT7620A_GDMA1_FWD_CFG);
++	fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) | (CDMA_ICS_EN | CDMA_UCS_EN | CDMA_TCS_EN), MT7620A_CDMA_CSG_CFG);
++}
++
++static void mt7620_tx_dma(struct fe_priv *priv, int idx, int len)
++{
++	if (len)
++		priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(len);
++	else
++		priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_DONE;
++}
++
++static void mt7620_rx_dma(struct fe_priv *priv, int idx, int len)
++{
++	priv->rx_dma[idx].rxd2 = RX_DMA_PLEN0(len);
++}
++
++static struct fe_soc_data mt7620_data = {
++	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++	.reset_fe = mt7620_fe_reset,
++	.set_mac = mt7620_set_mac,
++	.fwd_config = mt7620_fwd_config,
++	.tx_dma = mt7620_tx_dma,
++	.rx_dma = mt7620_rx_dma,
++	.switch_init = mt7620_gsw_probe,
++	.port_init = mt7620_port_init,
++	.min_pkt_len = 0,
++	.reg_table = rt5350_reg_table,
++	.pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS | MT7620A_DMA_2B_OFFSET,
++	.rx_dly_int = RT5350_RX_DLY_INT,
++	.tx_dly_int = RT5350_TX_DLY_INT,
++	.checksum_bit = MT7620_L4_VALID,
++	.has_carrier = mt7620a_has_carrier,
++	.mdio_read = mt7620_mdio_read,
++	.mdio_write = mt7620_mdio_write,
++	.mdio_adjust_link = mt7620_mdio_link_adjust,
++};
++
++const struct of_device_id of_fe_match[] = {
++	{ .compatible = "ralink,mt7620a-eth", .data = &mt7620_data },
++	{},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+diff --git a/drivers/net/ethernet/ralink/soc_rt2880.c b/drivers/net/ethernet/ralink/soc_rt2880.c
+new file mode 100644
+index 0000000..fdbd118
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt2880.c
+@@ -0,0 +1,51 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio_rt2880.h"
++
++#define SYSC_REG_RESET_CTRL		0x034
++#define RT2880_RESET_FE			BIT(18)
++
++void rt2880_fe_reset(void)
++{
++	rt_sysc_w32(RT2880_RESET_FE, SYSC_REG_RESET_CTRL);
++}
++
++struct fe_soc_data rt2880_data = {
++	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++	.reset_fe = rt2880_fe_reset,
++	.min_pkt_len = 64,
++        .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++	.checksum_bit = RX_DMA_L4VALID,
++	.rx_dly_int = FE_RX_DLY_INT,
++	.tx_dly_int = FE_TX_DLY_INT,
++	.mdio_read = rt2880_mdio_read,
++	.mdio_write = rt2880_mdio_write,
++	.mdio_link_adjust = rt2880_mdio_link_adjust,
++};
++
++const struct of_device_id of_fe_match[] = {
++	{ .compatible = "ralink,rt2880-eth", .data = &rt2880_data },
++	{},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+diff --git a/drivers/net/ethernet/ralink/soc_rt305x.c b/drivers/net/ethernet/ralink/soc_rt305x.c
+new file mode 100644
+index 0000000..c43d3f9
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt305x.c
+@@ -0,0 +1,102 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++
++#define RT305X_RESET_FE         BIT(21)
++#define RT305X_RESET_ESW        BIT(23)
++#define SYSC_REG_RESET_CTRL     0x034
++
++static const u32 rt5350_reg_table[FE_REG_COUNT] = {
++	[FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
++	[FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
++	[FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
++	[FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
++	[FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
++	[FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
++	[FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
++	[FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
++	[FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
++	[FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
++	[FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
++	[FE_REG_FE_DMA_VID_BASE] = 0,
++};
++
++static void rt305x_fe_reset(void)
++{
++	rt_sysc_w32(RT305X_RESET_FE, SYSC_REG_RESET_CTRL);
++	rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
++}
++
++static void rt5350_set_mac(struct fe_priv *priv, unsigned char *mac)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	fe_w32((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH);
++	fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++		RT5350_SDM_MAC_ADRL);
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static void rt5350_fwd_config(struct fe_priv *priv)
++{
++	fe_w32(fe_r32(RT5350_SDM_CFG) & ~0xffff, RT5350_SDM_CFG);
++	fe_w32(fe_r32(RT5350_SDM_CFG) | RT5350_SDM_ICS_EN | RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN,
++		RT5350_SDM_CFG);
++}
++
++static void rt5350_fe_reset(void)
++{
++	rt_sysc_w32(RT305X_RESET_FE | RT305X_RESET_ESW, SYSC_REG_RESET_CTRL);
++	rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
++}
++
++static struct fe_soc_data rt3050_data = {
++	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++	.reset_fe = rt305x_fe_reset,
++	.min_pkt_len = 64,
++        .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++	.checksum_bit = RX_DMA_L4VALID,
++	.rx_dly_int = FE_RX_DLY_INT,
++	.tx_dly_int = FE_TX_DLY_INT,
++};
++
++static struct fe_soc_data rt5350_data = {
++	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++	.reg_table = rt5350_reg_table,
++	.reset_fe = rt5350_fe_reset,
++	.set_mac = rt5350_set_mac,
++	.fwd_config = rt5350_fwd_config,
++	.min_pkt_len = 64,
++        .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++	.checksum_bit = RX_DMA_L4VALID,
++	.rx_dly_int = RT5350_RX_DLY_INT,
++	.tx_dly_int = RT5350_TX_DLY_INT,
++};
++
++const struct of_device_id of_fe_match[] = {
++	{ .compatible = "ralink,rt3050-eth", .data = &rt3050_data },
++	{ .compatible = "ralink,rt5350-eth", .data = &rt5350_data },
++	{},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+diff --git a/drivers/net/ethernet/ralink/soc_rt3883.c b/drivers/net/ethernet/ralink/soc_rt3883.c
+new file mode 100644
+index 0000000..3886be1
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt3883.c
+@@ -0,0 +1,59 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio_rt2880.h"
++
++#define RT3883_SYSC_REG_RSTCTRL		0x34
++#define RT3883_RSTCTRL_FE		BIT(21)
++
++static void rt3883_fe_reset(void)
++{
++	u32 t;
++
++	t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
++	t |= RT3883_RSTCTRL_FE;
++	rt_sysc_w32(t , RT3883_SYSC_REG_RSTCTRL);
++
++	t &= ~RT3883_RSTCTRL_FE;
++	rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
++}
++
++static struct fe_soc_data rt3883_data = {
++	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++	.reset_fe = rt3883_fe_reset,
++	.min_pkt_len = 64,
++        .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++	.rx_dly_int = FE_RX_DLY_INT,
++	.tx_dly_int = FE_TX_DLY_INT,
++	.checksum_bit = RX_DMA_L4VALID,
++	.mdio_read = rt2880_mdio_read,
++	.mdio_write = rt2880_mdio_write,
++	.mdio_link_adjust = rt2880_mdio_link_adjust,
++};
++
++const struct of_device_id of_fe_match[] = {
++	{ .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
++	{},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
++
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0073-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-3.8/0073-USB-phy-add-ralink-SoC-driver.patch
new file mode 100644
index 0000000000..e6a63bd249
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0073-USB-phy-add-ralink-SoC-driver.patch
@@ -0,0 +1,238 @@
+From 277c29fcf17b9e3ada6ddc3bda0f7780bb8a222a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 20 Jun 2013 19:06:09 +0200
+Subject: [PATCH 73/79] USB: phy: add ralink SoC driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/phy/Kconfig      |    8 ++
+ drivers/usb/phy/Makefile     |    1 +
+ drivers/usb/phy/ralink-phy.c |  191 ++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 200 insertions(+)
+ create mode 100644 drivers/usb/phy/ralink-phy.c
+
+diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
+index 5de6e7f..9b899b0 100644
+--- a/drivers/usb/phy/Kconfig
++++ b/drivers/usb/phy/Kconfig
+@@ -45,3 +45,11 @@ config USB_RCAR_PHY
+ 
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called rcar-phy.
++
++config RALINK_USBPHY
++	bool "Ralink USB PHY controller Driver"
++	depends on MIPS && RALINK
++	select USB_OTG_UTILS
++	help
++	  Enable this to support ralink USB phy controller for ralink
++	  SoCs.
+diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
+index 1a579a8..52ba41a 100644
+--- a/drivers/usb/phy/Makefile
++++ b/drivers/usb/phy/Makefile
+@@ -9,3 +9,4 @@ obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
+ obj-$(CONFIG_MV_U3D_PHY)		+= mv_u3d_phy.o
+ obj-$(CONFIG_USB_EHCI_TEGRA)	+= tegra_usb_phy.o
+ obj-$(CONFIG_USB_RCAR_PHY)		+= rcar-phy.o
++obj-$(CONFIG_RALINK_USBPHY)		+= ralink-phy.o
+diff --git a/drivers/usb/phy/ralink-phy.c b/drivers/usb/phy/ralink-phy.c
+new file mode 100644
+index 0000000..3fbabea
+--- /dev/null
++++ b/drivers/usb/phy/ralink-phy.c
+@@ -0,0 +1,191 @@
++/*
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ * based on: Renesas R-Car USB phy driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/usb/otg.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RT_SYSC_REG_SYSCFG1		0x014
++#define RT_SYSC_REG_CLKCFG1		0x030
++#define RT_SYSC_REG_USB_PHY_CFG	0x05c
++
++#define RT_RSTCTRL_UDEV		BIT(25)
++#define RT_RSTCTRL_UHST		BIT(22)
++#define RT_SYSCFG1_USB0_HOST_MODE	BIT(10)
++
++#define MT7620_CLKCFG1_UPHY0_CLK_EN	BIT(25)
++#define RT_CLKCFG1_UPHY1_CLK_EN	BIT(20)
++#define RT_CLKCFG1_UPHY0_CLK_EN	BIT(18)
++
++#define USB_PHY_UTMI_8B60M		BIT(1)
++#define UDEV_WAKEUP			BIT(0)
++
++static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
++static struct reset_control *rstdev;
++static struct reset_control *rsthost;
++static u32 phy_clk;
++
++static void usb_phy_enable(int state)
++{
++	if (state)
++		rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
++	else
++		rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
++	mdelay(100);
++}
++
++static int usb_power_on(struct usb_phy *phy)
++{
++	if (atomic_inc_return(&usb_pwr_ref) == 1) {
++		u32 t;
++
++		usb_phy_enable(1);
++
++		reset_control_assert(rstdev);
++		reset_control_assert(rsthost);
++
++		if (OTG_STATE_B_HOST) {
++			rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
++			reset_control_deassert(rsthost);
++		} else {
++			rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
++			reset_control_deassert(rstdev);
++		}
++		mdelay(100);
++
++		t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
++		dev_info(phy->dev, "remote usb device wakeup %s\n",
++				(t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
++		if (t & USB_PHY_UTMI_8B60M)
++			dev_info(phy->dev, "UTMI 8bit 60MHz\n");
++		else
++			dev_info(phy->dev, "UTMI 16bit 30MHz\n");
++	}
++
++	return 0;
++}
++
++static void usb_power_off(struct usb_phy *phy)
++{
++	if (atomic_dec_return(&usb_pwr_ref) == 0) {
++		usb_phy_enable(0);
++		reset_control_assert(rstdev);
++		reset_control_assert(rsthost);
++	}
++}
++
++static int usb_set_host(struct usb_otg *otg, struct usb_bus *host)
++{
++	otg->gadget = NULL;
++	otg->host = host;
++
++	return 0;
++}
++
++static int usb_set_peripheral(struct usb_otg *otg,
++		struct usb_gadget *gadget)
++{
++	otg->host = NULL;
++	otg->gadget = gadget;
++
++	return 0;
++}
++
++static const struct of_device_id ralink_usbphy_dt_match[] = {
++	{ .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
++	{ .compatible = "ralink,mt7620a-usbphy", .data = (void *) MT7620_CLKCFG1_UPHY0_CLK_EN },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match);
++
++static int usb_phy_probe(struct platform_device *pdev)
++{
++	const struct of_device_id *match;
++	struct device *dev = &pdev->dev;
++	struct usb_otg *otg;
++	struct usb_phy *phy;
++	int ret;
++
++	match = of_match_device(ralink_usbphy_dt_match, &pdev->dev);
++	phy_clk = (int) match->data;
++
++	rsthost = devm_reset_control_get(&pdev->dev, "host");
++	if (IS_ERR(rsthost))
++		return PTR_ERR(rsthost);
++
++	rstdev = devm_reset_control_get(&pdev->dev, "device");
++	if (IS_ERR(rstdev))
++		return PTR_ERR(rstdev);
++
++	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
++	if (!phy) {
++		dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n");
++		return -ENOMEM;
++	}
++
++	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
++	if (!otg) {
++		dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
++		return -ENOMEM;
++	}
++
++	phy->dev = dev;
++	phy->label = dev_name(dev);
++	phy->init = usb_power_on;
++	phy->shutdown = usb_power_off;
++	otg->set_host = usb_set_host;
++	otg->set_peripheral = usb_set_peripheral;
++	otg->phy = phy;
++	phy->otg = otg;
++	ret = usb_add_phy(phy, USB_PHY_TYPE_USB2);
++
++	if (ret < 0) {
++		dev_err(dev, "usb phy addition error\n");
++		return ret;
++	}
++
++	platform_set_drvdata(pdev, phy);
++
++	dev_info(&pdev->dev, "loaded\n");
++
++	return ret;
++}
++
++static int usb_phy_remove(struct platform_device *pdev)
++{
++	struct usb_phy *phy = platform_get_drvdata(pdev);
++
++	usb_remove_phy(phy);
++
++	return 0;
++}
++
++static struct platform_driver usb_phy_driver = {
++	.driver		= {
++		.owner	= THIS_MODULE,
++		.name	= "rt3xxx-usbphy",
++		.of_match_table = of_match_ptr(ralink_usbphy_dt_match),
++	},
++	.probe		= usb_phy_probe,
++	.remove		= usb_phy_remove,
++};
++
++module_platform_driver(usb_phy_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("Ralink USB phy");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0074-USB-MIPS-ralink-fix-usb-issue-on-mt7620.patch b/target/linux/ramips/patches-3.8/0074-USB-MIPS-ralink-fix-usb-issue-on-mt7620.patch
new file mode 100644
index 0000000000..ad8269cb23
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0074-USB-MIPS-ralink-fix-usb-issue-on-mt7620.patch
@@ -0,0 +1,48 @@
+From 93bb6d731e96dc373b88a910ca9db66c560c8f4e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 24 May 2013 21:28:08 +0200
+Subject: [PATCH 74/79] USB: MIPS: ralink: fix usb issue on mt7620
+
+USB fails when frequency scaling is enabled. Increase the idle cpu speed when
+scaled.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/mt7620.h |    1 +
+ arch/mips/ralink/mt7620.c                  |    8 ++++++++
+ 2 files changed, 9 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index 9809972..d469c69 100644
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -20,6 +20,7 @@
+ #define SYSC_REG_CHIP_REV		0x0c
+ #define SYSC_REG_SYSTEM_CONFIG0		0x10
+ #define SYSC_REG_SYSTEM_CONFIG1		0x14
++#define SYSC_REG_CPU_SYS_CLKCFG		0x3c
+ #define SYSC_REG_CPLL_CONFIG0		0x54
+ #define SYSC_REG_CPLL_CONFIG1		0x58
+ 
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 4956d96..d76eb85 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -186,6 +186,14 @@ void __init ralink_clk_init(void)
+ 	ralink_clk_add("10000500.uart", 40000000);
+ 	ralink_clk_add("10000b00.spi", 40000000);
+ 	ralink_clk_add("10000c00.uartlite", 40000000);
++
++#ifdef CONFIG_USB
++	/*
++	 * When the CPU goes into sleep mode, the BUS clock will be too low for
++	 * USB to function properly
++	 */
++	rt_sysc_m32(0x1f1f, 0x303, SYSC_REG_CPU_SYS_CLKCFG);
++#endif
+ }
+ 
+ void __init ralink_of_remap(void)
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0075-Kbuild-add-missing-space.patch b/target/linux/ramips/patches-3.8/0075-Kbuild-add-missing-space.patch
new file mode 100644
index 0000000000..b66bd85696
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0075-Kbuild-add-missing-space.patch
@@ -0,0 +1,38 @@
+From 5d5c270635a50b82931bb32f6fe28b84d45bdb59 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 17 May 2013 01:03:45 +0200
+Subject: [PATCH 75/79] Kbuild: add missing space
+
+Currently the output looks like this:
+DTC     arch/mips/ralink/dts/mt7620a_eval.dtb
+DTB    arch/mips/ralink/dts/mt7620a_eval.dtb.S
+AS      arch/mips/ralink/dts/mt7620a_eval.dtb.o
+
+Whitespace error was introduced by initial commit
+commit aab94339cd85d726abeae78fc02351fc1910e6a4
+Author: Dirk Brandewie <dirk.brandewie@gmail.com>
+Date:   Wed Dec 22 11:57:26 2010 -0800
+
+of: Add support for linking device tree blobs into vmlinux
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ scripts/Makefile.lib |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
+index bdf42fd..21c1359 100644
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -246,7 +246,7 @@ cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
+ # ---------------------------------------------------------------------------
+ 
+ # Generate an assembly file to wrap the output of the device tree compiler
+-quiet_cmd_dt_S_dtb= DTB    $@
++quiet_cmd_dt_S_dtb= DTB     $@
+ cmd_dt_S_dtb=						\
+ (							\
+ 	echo '\#include <asm-generic/vmlinux.lds.h>'; 	\
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0076-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-3.8/0076-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
new file mode 100644
index 0000000000..c1fe6ad2a0
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0076-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
@@ -0,0 +1,3446 @@
+From 3bebf4a4400ab70ccef98c069d240dbd17dd718f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 20 Jun 2013 19:13:25 +0200
+Subject: [PATCH 76/79] mmc: MIPS: ralink: add sdhci for mt7620a SoC
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mmc/host/Kconfig        |   11 +
+ drivers/mmc/host/Makefile       |    1 +
+ drivers/mmc/host/mt6575_sd.h    | 1068 ++++++++++++++++++
+ drivers/mmc/host/sdhci-mt7620.c | 2314 +++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 3394 insertions(+)
+ create mode 100644 drivers/mmc/host/mt6575_sd.h
+ create mode 100644 drivers/mmc/host/sdhci-mt7620.c
+
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index 8d13c65..04085b3 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -241,6 +241,17 @@ config MMC_SDHCI_S3C_DMA
+ 
+ 	  YMMV.
+ 
++config MMC_SDHCI_MT7620
++	tristate "SDHCI platform support for the MT7620 SD/MMC Controller"
++	depends on SOC_MT7620
++	depends on MMC_SDHCI_PLTFM
++	select MMC_SDHCI_IO_ACCESSORS
++	help
++	  This selects the BCM2835 SD/MMC controller. If you have a BCM2835
++	  platform with SD or MMC devices, say Y or M here.
++
++	  If unsure, say N.
++
+ config MMC_OMAP
+ 	tristate "TI OMAP Multimedia Card Interface support"
+ 	depends on ARCH_OMAP
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index e4e218c..be79804 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -58,6 +58,7 @@ obj-$(CONFIG_MMC_SDHCI_DOVE)		+= sdhci-dove.o
+ obj-$(CONFIG_MMC_SDHCI_TEGRA)		+= sdhci-tegra.o
+ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
+ obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
++obj-$(CONFIG_MMC_SDHCI_MT7620)		+= sdhci-mt7620.o
+ 
+ ifeq ($(CONFIG_CB710_DEBUG),y)
+ 	CFLAGS-cb710-mmc	+= -DDEBUG
+diff --git a/drivers/mmc/host/mt6575_sd.h b/drivers/mmc/host/mt6575_sd.h
+new file mode 100644
+index 0000000..406382c
+--- /dev/null
++++ b/drivers/mmc/host/mt6575_sd.h
+@@ -0,0 +1,1068 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ */
++/* MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#ifndef MT6575_SD_H
++#define MT6575_SD_H
++
++#include <linux/bitops.h>
++#include <linux/mmc/host.h>
++
++// #include <mach/mt6575_reg_base.h> /* --- by chhung */
++
++typedef void (*sdio_irq_handler_t)(void*);  /* external irq handler */
++typedef void (*pm_callback_t)(pm_message_t state, void *data);
++
++#define MSDC_CD_PIN_EN      (1 << 0)  /* card detection pin is wired   */
++#define MSDC_WP_PIN_EN      (1 << 1)  /* write protection pin is wired */
++#define MSDC_RST_PIN_EN     (1 << 2)  /* emmc reset pin is wired       */
++#define MSDC_SDIO_IRQ       (1 << 3)  /* use internal sdio irq (bus)   */
++#define MSDC_EXT_SDIO_IRQ   (1 << 4)  /* use external sdio irq         */
++#define MSDC_REMOVABLE      (1 << 5)  /* removable slot                */
++#define MSDC_SYS_SUSPEND    (1 << 6)  /* suspended by system           */
++#define MSDC_HIGHSPEED      (1 << 7)  /* high-speed mode support       */
++#define MSDC_UHS1           (1 << 8)  /* uhs-1 mode support            */
++#define MSDC_DDR            (1 << 9)  /* ddr mode support              */
++#define MSDC_SPE            (1 << 10)  /* special support              */
++#define MSDC_INTERNAL_CLK   (1 << 11)  /* Force Internal clock */
++#define MSDC_TABDRV	(1 << 12)  /* TABLET */
++
++
++#define MSDC_SMPL_RISING    (0)
++#define MSDC_SMPL_FALLING   (1)
++
++#define MSDC_CMD_PIN        (0)
++#define MSDC_DAT_PIN        (1)
++#define MSDC_CD_PIN         (2)
++#define MSDC_WP_PIN         (3)
++#define MSDC_RST_PIN        (4)
++
++enum {
++    MSDC_CLKSRC_26MHZ = 0,
++    MSDC_CLKSRC_197MHZ = 1,
++    MSDC_CLKSRC_208MHZ = 2
++};
++
++struct msdc_hw {
++	unsigned char  clk_src;          /* host clock source */
++	unsigned char  cmd_edge;         /* command latch edge */
++	unsigned char  data_edge;        /* data latch edge */
++	unsigned char  clk_drv;          /* clock pad driving */
++	unsigned char  cmd_drv;          /* command pad driving */
++	unsigned char  dat_drv;          /* data pad driving */
++	unsigned long  flags;            /* hardware capability flags */
++	unsigned long  data_pins;        /* data pins */
++	unsigned long  data_offset;      /* data address offset */
++
++	/* config gpio pull mode */
++	void (*config_gpio_pin)(int type, int pull);
++
++	/* external power control for card */
++	void (*ext_power_on)(void);
++	void (*ext_power_off)(void);
++
++	/* external sdio irq operations */
++	void (*request_sdio_eirq)(sdio_irq_handler_t sdio_irq_handler, void *data);
++	void (*enable_sdio_eirq)(void);
++	void (*disable_sdio_eirq)(void);
++
++	/* external cd irq operations */
++	void (*request_cd_eirq)(sdio_irq_handler_t cd_irq_handler, void *data);
++	void (*enable_cd_eirq)(void);
++	void (*disable_cd_eirq)(void);
++	int  (*get_cd_status)(void);
++
++	/* power management callback for external module */
++	void (*register_pm)(pm_callback_t pm_cb, void *data);
++};
++
++extern struct msdc_hw msdc0_hw;
++extern struct msdc_hw msdc1_hw;
++extern struct msdc_hw msdc2_hw;
++extern struct msdc_hw msdc3_hw;
++
++    
++/*--------------------------------------------------------------------------*/
++/* Common Macro                                                             */
++/*--------------------------------------------------------------------------*/
++#define REG_ADDR(x)                 ((volatile u32*)(base + OFFSET_##x))
++
++/*--------------------------------------------------------------------------*/
++/* Common Definition                                                        */
++/*--------------------------------------------------------------------------*/
++#define MSDC_FIFO_SZ            (128)
++#define MSDC_FIFO_THD           (64)  // (128)
++#define MSDC_NUM                (4)
++
++#define MSDC_MS                 (0)
++#define MSDC_SDMMC              (1)
++
++#define MSDC_MODE_UNKNOWN       (0)
++#define MSDC_MODE_PIO           (1)
++#define MSDC_MODE_DMA_BASIC     (2)
++#define MSDC_MODE_DMA_DESC      (3)
++#define MSDC_MODE_DMA_ENHANCED  (4)
++#define MSDC_MODE_MMC_STREAM    (5)
++
++#define MSDC_BUS_1BITS          (0)
++#define MSDC_BUS_4BITS          (1)
++#define MSDC_BUS_8BITS          (2)
++
++#define MSDC_BRUST_8B           (3)
++#define MSDC_BRUST_16B          (4)
++#define MSDC_BRUST_32B          (5)
++#define MSDC_BRUST_64B          (6)
++
++#define MSDC_PIN_PULL_NONE      (0)
++#define MSDC_PIN_PULL_DOWN      (1)
++#define MSDC_PIN_PULL_UP        (2)
++#define MSDC_PIN_KEEP           (3)
++
++#define MSDC_MAX_SCLK           (48000000) /* +/- by chhung */
++#define MSDC_MIN_SCLK           (260000)
++
++#define MSDC_AUTOCMD12          (0x0001)
++#define MSDC_AUTOCMD23          (0x0002)
++#define MSDC_AUTOCMD19          (0x0003)
++
++#define MSDC_EMMC_BOOTMODE0     (0)     /* Pull low CMD mode */
++#define MSDC_EMMC_BOOTMODE1     (1)     /* Reset CMD mode */
++
++enum {
++    RESP_NONE = 0,
++    RESP_R1,
++    RESP_R2,
++    RESP_R3,
++    RESP_R4,
++    RESP_R5,
++    RESP_R6,
++    RESP_R7,
++    RESP_R1B
++};
++
++/*--------------------------------------------------------------------------*/
++/* Register Offset                                                          */
++/*--------------------------------------------------------------------------*/
++#define OFFSET_MSDC_CFG         (0x0)
++#define OFFSET_MSDC_IOCON       (0x04)
++#define OFFSET_MSDC_PS          (0x08)
++#define OFFSET_MSDC_INT         (0x0c)
++#define OFFSET_MSDC_INTEN       (0x10)
++#define OFFSET_MSDC_FIFOCS      (0x14)
++#define OFFSET_MSDC_TXDATA      (0x18)
++#define OFFSET_MSDC_RXDATA      (0x1c)
++#define OFFSET_SDC_CFG          (0x30)
++#define OFFSET_SDC_CMD          (0x34)
++#define OFFSET_SDC_ARG          (0x38)
++#define OFFSET_SDC_STS          (0x3c)
++#define OFFSET_SDC_RESP0        (0x40)
++#define OFFSET_SDC_RESP1        (0x44)
++#define OFFSET_SDC_RESP2        (0x48)
++#define OFFSET_SDC_RESP3        (0x4c)
++#define OFFSET_SDC_BLK_NUM      (0x50)
++#define OFFSET_SDC_CSTS         (0x58)
++#define OFFSET_SDC_CSTS_EN      (0x5c)
++#define OFFSET_SDC_DCRC_STS     (0x60)
++#define OFFSET_EMMC_CFG0        (0x70)
++#define OFFSET_EMMC_CFG1        (0x74)
++#define OFFSET_EMMC_STS         (0x78)
++#define OFFSET_EMMC_IOCON       (0x7c)
++#define OFFSET_SDC_ACMD_RESP    (0x80)
++#define OFFSET_SDC_ACMD19_TRG   (0x84)
++#define OFFSET_SDC_ACMD19_STS   (0x88)
++#define OFFSET_MSDC_DMA_SA      (0x90)
++#define OFFSET_MSDC_DMA_CA      (0x94)
++#define OFFSET_MSDC_DMA_CTRL    (0x98)
++#define OFFSET_MSDC_DMA_CFG     (0x9c)
++#define OFFSET_MSDC_DBG_SEL     (0xa0)
++#define OFFSET_MSDC_DBG_OUT     (0xa4)
++#define OFFSET_MSDC_PATCH_BIT   (0xb0)
++#define OFFSET_MSDC_PATCH_BIT1  (0xb4)
++#define OFFSET_MSDC_PAD_CTL0    (0xe0)
++#define OFFSET_MSDC_PAD_CTL1    (0xe4)
++#define OFFSET_MSDC_PAD_CTL2    (0xe8)
++#define OFFSET_MSDC_PAD_TUNE    (0xec)
++#define OFFSET_MSDC_DAT_RDDLY0  (0xf0)
++#define OFFSET_MSDC_DAT_RDDLY1  (0xf4)
++#define OFFSET_MSDC_HW_DBG      (0xf8)
++#define OFFSET_MSDC_VERSION     (0x100)
++#define OFFSET_MSDC_ECO_VER     (0x104)
++
++/*--------------------------------------------------------------------------*/
++/* Register Address                                                         */
++/*--------------------------------------------------------------------------*/
++
++/* common register */
++#define MSDC_CFG                REG_ADDR(MSDC_CFG)
++#define MSDC_IOCON              REG_ADDR(MSDC_IOCON)
++#define MSDC_PS                 REG_ADDR(MSDC_PS)
++#define MSDC_INT                REG_ADDR(MSDC_INT)
++#define MSDC_INTEN              REG_ADDR(MSDC_INTEN)
++#define MSDC_FIFOCS             REG_ADDR(MSDC_FIFOCS)
++#define MSDC_TXDATA             REG_ADDR(MSDC_TXDATA)
++#define MSDC_RXDATA             REG_ADDR(MSDC_RXDATA)
++#define MSDC_PATCH_BIT0         REG_ADDR(MSDC_PATCH_BIT)
++
++/* sdmmc register */
++#define SDC_CFG                 REG_ADDR(SDC_CFG)
++#define SDC_CMD                 REG_ADDR(SDC_CMD)
++#define SDC_ARG                 REG_ADDR(SDC_ARG)
++#define SDC_STS                 REG_ADDR(SDC_STS)
++#define SDC_RESP0               REG_ADDR(SDC_RESP0)
++#define SDC_RESP1               REG_ADDR(SDC_RESP1)
++#define SDC_RESP2               REG_ADDR(SDC_RESP2)
++#define SDC_RESP3               REG_ADDR(SDC_RESP3)
++#define SDC_BLK_NUM             REG_ADDR(SDC_BLK_NUM)
++#define SDC_CSTS                REG_ADDR(SDC_CSTS)
++#define SDC_CSTS_EN             REG_ADDR(SDC_CSTS_EN)
++#define SDC_DCRC_STS            REG_ADDR(SDC_DCRC_STS)
++
++/* emmc register*/
++#define EMMC_CFG0               REG_ADDR(EMMC_CFG0)
++#define EMMC_CFG1               REG_ADDR(EMMC_CFG1)
++#define EMMC_STS                REG_ADDR(EMMC_STS)
++#define EMMC_IOCON              REG_ADDR(EMMC_IOCON)
++
++/* auto command register */
++#define SDC_ACMD_RESP           REG_ADDR(SDC_ACMD_RESP)
++#define SDC_ACMD19_TRG          REG_ADDR(SDC_ACMD19_TRG)
++#define SDC_ACMD19_STS          REG_ADDR(SDC_ACMD19_STS)
++
++/* dma register */
++#define MSDC_DMA_SA             REG_ADDR(MSDC_DMA_SA)
++#define MSDC_DMA_CA             REG_ADDR(MSDC_DMA_CA)
++#define MSDC_DMA_CTRL           REG_ADDR(MSDC_DMA_CTRL)
++#define MSDC_DMA_CFG            REG_ADDR(MSDC_DMA_CFG)
++
++/* pad ctrl register */
++#define MSDC_PAD_CTL0           REG_ADDR(MSDC_PAD_CTL0)
++#define MSDC_PAD_CTL1           REG_ADDR(MSDC_PAD_CTL1)
++#define MSDC_PAD_CTL2           REG_ADDR(MSDC_PAD_CTL2)
++
++/* data read delay */
++#define MSDC_DAT_RDDLY0         REG_ADDR(MSDC_DAT_RDDLY0)
++#define MSDC_DAT_RDDLY1         REG_ADDR(MSDC_DAT_RDDLY1)
++
++/* debug register */
++#define MSDC_DBG_SEL            REG_ADDR(MSDC_DBG_SEL)
++#define MSDC_DBG_OUT            REG_ADDR(MSDC_DBG_OUT)
++
++/* misc register */
++#define MSDC_PATCH_BIT          REG_ADDR(MSDC_PATCH_BIT)
++#define MSDC_PATCH_BIT1         REG_ADDR(MSDC_PATCH_BIT1)
++#define MSDC_PAD_TUNE           REG_ADDR(MSDC_PAD_TUNE)
++#define MSDC_HW_DBG             REG_ADDR(MSDC_HW_DBG)
++#define MSDC_VERSION            REG_ADDR(MSDC_VERSION)
++#define MSDC_ECO_VER            REG_ADDR(MSDC_ECO_VER) /* ECO Version */
++
++/*--------------------------------------------------------------------------*/
++/* Register Mask                                                            */
++/*--------------------------------------------------------------------------*/
++
++/* MSDC_CFG mask */
++#define MSDC_CFG_MODE           (0x1  << 0)     /* RW */
++#define MSDC_CFG_CKPDN          (0x1  << 1)     /* RW */
++#define MSDC_CFG_RST            (0x1  << 2)     /* RW */
++#define MSDC_CFG_PIO            (0x1  << 3)     /* RW */
++#define MSDC_CFG_CKDRVEN        (0x1  << 4)     /* RW */
++#define MSDC_CFG_BV18SDT        (0x1  << 5)     /* RW */
++#define MSDC_CFG_BV18PSS        (0x1  << 6)     /* R  */
++#define MSDC_CFG_CKSTB          (0x1  << 7)     /* R  */
++#define MSDC_CFG_CKDIV          (0xff << 8)     /* RW */
++#define MSDC_CFG_CKMOD          (0x3  << 16)    /* RW */
++
++/* MSDC_IOCON mask */
++#define MSDC_IOCON_SDR104CKS    (0x1  << 0)     /* RW */
++#define MSDC_IOCON_RSPL         (0x1  << 1)     /* RW */
++#define MSDC_IOCON_DSPL         (0x1  << 2)     /* RW */
++#define MSDC_IOCON_DDLSEL       (0x1  << 3)     /* RW */
++#define MSDC_IOCON_DDR50CKD     (0x1  << 4)     /* RW */
++#define MSDC_IOCON_DSPLSEL      (0x1  << 5)     /* RW */
++#define MSDC_IOCON_D0SPL        (0x1  << 16)    /* RW */
++#define MSDC_IOCON_D1SPL        (0x1  << 17)    /* RW */
++#define MSDC_IOCON_D2SPL        (0x1  << 18)    /* RW */
++#define MSDC_IOCON_D3SPL        (0x1  << 19)    /* RW */
++#define MSDC_IOCON_D4SPL        (0x1  << 20)    /* RW */
++#define MSDC_IOCON_D5SPL        (0x1  << 21)    /* RW */
++#define MSDC_IOCON_D6SPL        (0x1  << 22)    /* RW */
++#define MSDC_IOCON_D7SPL        (0x1  << 23)    /* RW */
++#define MSDC_IOCON_RISCSZ       (0x3  << 24)    /* RW */
++
++/* MSDC_PS mask */
++#define MSDC_PS_CDEN            (0x1  << 0)     /* RW */
++#define MSDC_PS_CDSTS           (0x1  << 1)     /* R  */
++#define MSDC_PS_CDDEBOUNCE      (0xf  << 12)    /* RW */
++#define MSDC_PS_DAT             (0xff << 16)    /* R  */
++#define MSDC_PS_CMD             (0x1  << 24)    /* R  */
++#define MSDC_PS_WP              (0x1UL<< 31)    /* R  */
++
++/* MSDC_INT mask */
++#define MSDC_INT_MMCIRQ         (0x1  << 0)     /* W1C */
++#define MSDC_INT_CDSC           (0x1  << 1)     /* W1C */
++#define MSDC_INT_ACMDRDY        (0x1  << 3)     /* W1C */
++#define MSDC_INT_ACMDTMO        (0x1  << 4)     /* W1C */
++#define MSDC_INT_ACMDCRCERR     (0x1  << 5)     /* W1C */
++#define MSDC_INT_DMAQ_EMPTY     (0x1  << 6)     /* W1C */
++#define MSDC_INT_SDIOIRQ        (0x1  << 7)     /* W1C */
++#define MSDC_INT_CMDRDY         (0x1  << 8)     /* W1C */
++#define MSDC_INT_CMDTMO         (0x1  << 9)     /* W1C */
++#define MSDC_INT_RSPCRCERR      (0x1  << 10)    /* W1C */
++#define MSDC_INT_CSTA           (0x1  << 11)    /* R */
++#define MSDC_INT_XFER_COMPL     (0x1  << 12)    /* W1C */
++#define MSDC_INT_DXFER_DONE     (0x1  << 13)    /* W1C */
++#define MSDC_INT_DATTMO         (0x1  << 14)    /* W1C */
++#define MSDC_INT_DATCRCERR      (0x1  << 15)    /* W1C */
++#define MSDC_INT_ACMD19_DONE    (0x1  << 16)    /* W1C */
++
++/* MSDC_INTEN mask */
++#define MSDC_INTEN_MMCIRQ       (0x1  << 0)     /* RW */
++#define MSDC_INTEN_CDSC         (0x1  << 1)     /* RW */
++#define MSDC_INTEN_ACMDRDY      (0x1  << 3)     /* RW */
++#define MSDC_INTEN_ACMDTMO      (0x1  << 4)     /* RW */
++#define MSDC_INTEN_ACMDCRCERR   (0x1  << 5)     /* RW */
++#define MSDC_INTEN_DMAQ_EMPTY   (0x1  << 6)     /* RW */
++#define MSDC_INTEN_SDIOIRQ      (0x1  << 7)     /* RW */
++#define MSDC_INTEN_CMDRDY       (0x1  << 8)     /* RW */
++#define MSDC_INTEN_CMDTMO       (0x1  << 9)     /* RW */
++#define MSDC_INTEN_RSPCRCERR    (0x1  << 10)    /* RW */
++#define MSDC_INTEN_CSTA         (0x1  << 11)    /* RW */
++#define MSDC_INTEN_XFER_COMPL   (0x1  << 12)    /* RW */
++#define MSDC_INTEN_DXFER_DONE   (0x1  << 13)    /* RW */
++#define MSDC_INTEN_DATTMO       (0x1  << 14)    /* RW */
++#define MSDC_INTEN_DATCRCERR    (0x1  << 15)    /* RW */
++#define MSDC_INTEN_ACMD19_DONE  (0x1  << 16)    /* RW */
++
++/* MSDC_FIFOCS mask */
++#define MSDC_FIFOCS_RXCNT       (0xff << 0)     /* R */
++#define MSDC_FIFOCS_TXCNT       (0xff << 16)    /* R */
++#define MSDC_FIFOCS_CLR         (0x1UL<< 31)    /* RW */
++
++/* SDC_CFG mask */
++#define SDC_CFG_SDIOINTWKUP     (0x1  << 0)     /* RW */
++#define SDC_CFG_INSWKUP         (0x1  << 1)     /* RW */
++#define SDC_CFG_BUSWIDTH        (0x3  << 16)    /* RW */
++#define SDC_CFG_SDIO            (0x1  << 19)    /* RW */
++#define SDC_CFG_SDIOIDE         (0x1  << 20)    /* RW */      
++#define SDC_CFG_INTATGAP        (0x1  << 21)    /* RW */
++#define SDC_CFG_DTOC            (0xffUL << 24)  /* RW */
++
++/* SDC_CMD mask */
++#define SDC_CMD_OPC             (0x3f << 0)     /* RW */
++#define SDC_CMD_BRK             (0x1  << 6)     /* RW */
++#define SDC_CMD_RSPTYP          (0x7  << 7)     /* RW */
++#define SDC_CMD_DTYP            (0x3  << 11)    /* RW */
++#define SDC_CMD_DTYP            (0x3  << 11)    /* RW */
++#define SDC_CMD_RW              (0x1  << 13)    /* RW */
++#define SDC_CMD_STOP            (0x1  << 14)    /* RW */
++#define SDC_CMD_GOIRQ           (0x1  << 15)    /* RW */
++#define SDC_CMD_BLKLEN          (0xfff<< 16)    /* RW */
++#define SDC_CMD_AUTOCMD         (0x3  << 28)    /* RW */
++#define SDC_CMD_VOLSWTH         (0x1  << 30)    /* RW */
++
++/* SDC_STS mask */
++#define SDC_STS_SDCBUSY         (0x1  << 0)     /* RW */
++#define SDC_STS_CMDBUSY         (0x1  << 1)     /* RW */
++#define SDC_STS_SWR_COMPL       (0x1  << 31)    /* RW */
++
++/* SDC_DCRC_STS mask */
++#define SDC_DCRC_STS_NEG        (0xf  << 8)     /* RO */
++#define SDC_DCRC_STS_POS        (0xff << 0)     /* RO */
++
++/* EMMC_CFG0 mask */
++#define EMMC_CFG0_BOOTSTART     (0x1  << 0)     /* W */
++#define EMMC_CFG0_BOOTSTOP      (0x1  << 1)     /* W */
++#define EMMC_CFG0_BOOTMODE      (0x1  << 2)     /* RW */
++#define EMMC_CFG0_BOOTACKDIS    (0x1  << 3)     /* RW */
++#define EMMC_CFG0_BOOTWDLY      (0x7  << 12)    /* RW */
++#define EMMC_CFG0_BOOTSUPP      (0x1  << 15)    /* RW */
++
++/* EMMC_CFG1 mask */
++#define EMMC_CFG1_BOOTDATTMC    (0xfffff << 0)  /* RW */
++#define EMMC_CFG1_BOOTACKTMC    (0xfffUL << 20) /* RW */
++
++/* EMMC_STS mask */
++#define EMMC_STS_BOOTCRCERR     (0x1  << 0)     /* W1C */
++#define EMMC_STS_BOOTACKERR     (0x1  << 1)     /* W1C */
++#define EMMC_STS_BOOTDATTMO     (0x1  << 2)     /* W1C */
++#define EMMC_STS_BOOTACKTMO     (0x1  << 3)     /* W1C */
++#define EMMC_STS_BOOTUPSTATE    (0x1  << 4)     /* R */
++#define EMMC_STS_BOOTACKRCV     (0x1  << 5)     /* W1C */
++#define EMMC_STS_BOOTDATRCV     (0x1  << 6)     /* R */
++
++/* EMMC_IOCON mask */
++#define EMMC_IOCON_BOOTRST      (0x1  << 0)     /* RW */
++
++/* SDC_ACMD19_TRG mask */
++#define SDC_ACMD19_TRG_TUNESEL  (0xf  << 0)     /* RW */
++
++/* MSDC_DMA_CTRL mask */
++#define MSDC_DMA_CTRL_START     (0x1  << 0)     /* W */
++#define MSDC_DMA_CTRL_STOP      (0x1  << 1)     /* W */
++#define MSDC_DMA_CTRL_RESUME    (0x1  << 2)     /* W */
++#define MSDC_DMA_CTRL_MODE      (0x1  << 8)     /* RW */
++#define MSDC_DMA_CTRL_LASTBUF   (0x1  << 10)    /* RW */
++#define MSDC_DMA_CTRL_BRUSTSZ   (0x7  << 12)    /* RW */
++#define MSDC_DMA_CTRL_XFERSZ    (0xffffUL << 16)/* RW */
++
++/* MSDC_DMA_CFG mask */
++#define MSDC_DMA_CFG_STS        (0x1  << 0)     /* R */
++#define MSDC_DMA_CFG_DECSEN     (0x1  << 1)     /* RW */
++#define MSDC_DMA_CFG_BDCSERR    (0x1  << 4)     /* R */
++#define MSDC_DMA_CFG_GPDCSERR   (0x1  << 5)     /* R */
++
++/* MSDC_PATCH_BIT mask */
++#define MSDC_PATCH_BIT_WFLSMODE (0x1  << 0)     /* RW */
++#define MSDC_PATCH_BIT_ODDSUPP  (0x1  << 1)     /* RW */
++#define MSDC_PATCH_BIT_CKGEN_CK (0x1  << 6)     /* E2: Fixed to 1 */
++#define MSDC_PATCH_BIT_IODSSEL  (0x1  << 16)    /* RW */
++#define MSDC_PATCH_BIT_IOINTSEL (0x1  << 17)    /* RW */
++#define MSDC_PATCH_BIT_BUSYDLY  (0xf  << 18)    /* RW */
++#define MSDC_PATCH_BIT_WDOD     (0xf  << 22)    /* RW */
++#define MSDC_PATCH_BIT_IDRTSEL  (0x1  << 26)    /* RW */
++#define MSDC_PATCH_BIT_CMDFSEL  (0x1  << 27)    /* RW */
++#define MSDC_PATCH_BIT_INTDLSEL (0x1  << 28)    /* RW */
++#define MSDC_PATCH_BIT_SPCPUSH  (0x1  << 29)    /* RW */
++#define MSDC_PATCH_BIT_DECRCTMO (0x1  << 30)    /* RW */
++
++/* MSDC_PATCH_BIT1 mask */
++#define MSDC_PATCH_BIT1_WRDAT_CRCS  (0x7 << 3)
++#define MSDC_PATCH_BIT1_CMD_RSP     (0x7 << 0)
++
++/* MSDC_PAD_CTL0 mask */
++#define MSDC_PAD_CTL0_CLKDRVN   (0x7  << 0)     /* RW */
++#define MSDC_PAD_CTL0_CLKDRVP   (0x7  << 4)     /* RW */
++#define MSDC_PAD_CTL0_CLKSR     (0x1  << 8)     /* RW */
++#define MSDC_PAD_CTL0_CLKPD     (0x1  << 16)    /* RW */
++#define MSDC_PAD_CTL0_CLKPU     (0x1  << 17)    /* RW */
++#define MSDC_PAD_CTL0_CLKSMT    (0x1  << 18)    /* RW */
++#define MSDC_PAD_CTL0_CLKIES    (0x1  << 19)    /* RW */
++#define MSDC_PAD_CTL0_CLKTDSEL  (0xf  << 20)    /* RW */
++#define MSDC_PAD_CTL0_CLKRDSEL  (0xffUL<< 24)   /* RW */
++
++/* MSDC_PAD_CTL1 mask */
++#define MSDC_PAD_CTL1_CMDDRVN   (0x7  << 0)     /* RW */
++#define MSDC_PAD_CTL1_CMDDRVP   (0x7  << 4)     /* RW */
++#define MSDC_PAD_CTL1_CMDSR     (0x1  << 8)     /* RW */
++#define MSDC_PAD_CTL1_CMDPD     (0x1  << 16)    /* RW */
++#define MSDC_PAD_CTL1_CMDPU     (0x1  << 17)    /* RW */
++#define MSDC_PAD_CTL1_CMDSMT    (0x1  << 18)    /* RW */
++#define MSDC_PAD_CTL1_CMDIES    (0x1  << 19)    /* RW */
++#define MSDC_PAD_CTL1_CMDTDSEL  (0xf  << 20)    /* RW */
++#define MSDC_PAD_CTL1_CMDRDSEL  (0xffUL<< 24)   /* RW */
++
++/* MSDC_PAD_CTL2 mask */
++#define MSDC_PAD_CTL2_DATDRVN   (0x7  << 0)     /* RW */
++#define MSDC_PAD_CTL2_DATDRVP   (0x7  << 4)     /* RW */
++#define MSDC_PAD_CTL2_DATSR     (0x1  << 8)     /* RW */
++#define MSDC_PAD_CTL2_DATPD     (0x1  << 16)    /* RW */
++#define MSDC_PAD_CTL2_DATPU     (0x1  << 17)    /* RW */
++#define MSDC_PAD_CTL2_DATIES    (0x1  << 19)    /* RW */
++#define MSDC_PAD_CTL2_DATSMT    (0x1  << 18)    /* RW */
++#define MSDC_PAD_CTL2_DATTDSEL  (0xf  << 20)    /* RW */
++#define MSDC_PAD_CTL2_DATRDSEL  (0xffUL<< 24)   /* RW */
++
++/* MSDC_PAD_TUNE mask */
++#define MSDC_PAD_TUNE_DATWRDLY  (0x1F << 0)     /* RW */
++#define MSDC_PAD_TUNE_DATRRDLY  (0x1F << 8)     /* RW */
++#define MSDC_PAD_TUNE_CMDRDLY   (0x1F << 16)    /* RW */
++#define MSDC_PAD_TUNE_CMDRRDLY  (0x1FUL << 22)  /* RW */
++#define MSDC_PAD_TUNE_CLKTXDLY  (0x1FUL << 27)  /* RW */
++
++/* MSDC_DAT_RDDLY0/1 mask */
++#define MSDC_DAT_RDDLY0_D0      (0x1F << 0)     /* RW */
++#define MSDC_DAT_RDDLY0_D1      (0x1F << 8)     /* RW */
++#define MSDC_DAT_RDDLY0_D2      (0x1F << 16)    /* RW */
++#define MSDC_DAT_RDDLY0_D3      (0x1F << 24)    /* RW */
++
++#define MSDC_DAT_RDDLY1_D4      (0x1F << 0)     /* RW */
++#define MSDC_DAT_RDDLY1_D5      (0x1F << 8)     /* RW */
++#define MSDC_DAT_RDDLY1_D6      (0x1F << 16)    /* RW */
++#define MSDC_DAT_RDDLY1_D7      (0x1F << 24)    /* RW */
++
++#define MSDC_CKGEN_MSDC_DLY_SEL   (0x1F<<10)
++#define MSDC_INT_DAT_LATCH_CK_SEL  (0x7<<7)
++#define MSDC_CKGEN_MSDC_CK_SEL     (0x1<<6)
++#define CARD_READY_FOR_DATA             (1<<8)
++#define CARD_CURRENT_STATE(x)           ((x&0x00001E00)>>9)
++
++/*--------------------------------------------------------------------------*/
++/* Descriptor Structure                                                     */
++/*--------------------------------------------------------------------------*/
++typedef struct {
++    u32  hwo:1; /* could be changed by hw */
++    u32  bdp:1;
++    u32  rsv0:6;
++    u32  chksum:8;
++    u32  intr:1;
++    u32  rsv1:15;
++    void *next;
++    void *ptr;
++    u32  buflen:16;
++    u32  extlen:8;
++    u32  rsv2:8;
++    u32  arg;
++    u32  blknum;
++    u32  cmd;
++} gpd_t;
++
++typedef struct {
++    u32  eol:1;
++    u32  rsv0:7;
++    u32  chksum:8;
++    u32  rsv1:1;
++    u32  blkpad:1;
++    u32  dwpad:1;
++    u32  rsv2:13;
++    void *next;
++    void *ptr;
++    u32  buflen:16;
++    u32  rsv3:16;
++} bd_t;
++
++/*--------------------------------------------------------------------------*/
++/* Register Debugging Structure                                             */
++/*--------------------------------------------------------------------------*/
++
++typedef struct {
++    u32 msdc:1;
++    u32 ckpwn:1;
++    u32 rst:1;
++    u32 pio:1;
++    u32 ckdrven:1;
++    u32 start18v:1;
++    u32 pass18v:1;
++    u32 ckstb:1;
++    u32 ckdiv:8;
++    u32 ckmod:2;
++    u32 pad:14;		
++} msdc_cfg_reg;
++typedef struct {
++    u32 sdr104cksel:1;
++    u32 rsmpl:1;
++    u32 dsmpl:1;
++    u32 ddlysel:1;
++    u32 ddr50ckd:1;
++    u32 dsplsel:1;
++    u32 pad1:10;
++    u32 d0spl:1;
++    u32 d1spl:1;
++    u32 d2spl:1;
++    u32 d3spl:1;
++    u32 d4spl:1;
++    u32 d5spl:1;
++    u32 d6spl:1;
++    u32 d7spl:1;
++    u32 riscsz:1;
++    u32 pad2:7;
++} msdc_iocon_reg;
++typedef struct {
++    u32 cden:1;
++    u32 cdsts:1;
++    u32 pad1:10;
++    u32 cddebounce:4;
++    u32 dat:8;
++    u32 cmd:1;
++    u32 pad2:6;
++    u32 wp:1;
++} msdc_ps_reg;
++typedef struct {
++    u32 mmcirq:1;
++    u32 cdsc:1;
++    u32 pad1:1;
++    u32 atocmdrdy:1;
++    u32 atocmdtmo:1;
++    u32 atocmdcrc:1;
++    u32 dmaqempty:1;
++    u32 sdioirq:1;
++    u32 cmdrdy:1;
++    u32 cmdtmo:1;
++    u32 rspcrc:1;
++    u32 csta:1;
++    u32 xfercomp:1;
++    u32 dxferdone:1;
++    u32 dattmo:1;
++    u32 datcrc:1;
++    u32 atocmd19done:1;
++    u32 pad2:15;
++} msdc_int_reg;
++typedef struct {
++    u32 mmcirq:1;
++    u32 cdsc:1;
++    u32 pad1:1;
++    u32 atocmdrdy:1;
++    u32 atocmdtmo:1;
++    u32 atocmdcrc:1;
++    u32 dmaqempty:1;
++    u32 sdioirq:1;
++    u32 cmdrdy:1;
++    u32 cmdtmo:1;
++    u32 rspcrc:1;
++    u32 csta:1;
++    u32 xfercomp:1;
++    u32 dxferdone:1;
++    u32 dattmo:1;
++    u32 datcrc:1;
++    u32 atocmd19done:1;
++    u32 pad2:15;
++} msdc_inten_reg;
++typedef struct {
++    u32 rxcnt:8;
++    u32 pad1:8;
++    u32 txcnt:8;
++    u32 pad2:7;
++    u32 clr:1;
++} msdc_fifocs_reg;
++typedef struct {
++    u32 val;
++} msdc_txdat_reg;
++typedef struct {
++    u32 val;
++} msdc_rxdat_reg;
++typedef struct {
++    u32 sdiowkup:1;
++    u32 inswkup:1;
++    u32 pad1:14;
++    u32 buswidth:2;
++    u32 pad2:1;
++    u32 sdio:1;
++    u32 sdioide:1;
++    u32 intblkgap:1;
++    u32 pad4:2;
++    u32 dtoc:8;
++} sdc_cfg_reg;
++typedef struct {
++    u32 cmd:6;
++    u32 brk:1;
++    u32 rsptyp:3;
++    u32 pad1:1;
++    u32 dtype:2;
++    u32 rw:1;
++    u32 stop:1;
++    u32 goirq:1;    
++    u32 blklen:12;
++    u32 atocmd:2;
++    u32 volswth:1;
++    u32 pad2:1;
++} sdc_cmd_reg;
++typedef struct {
++    u32 arg;
++} sdc_arg_reg;
++typedef struct {
++    u32 sdcbusy:1;
++    u32 cmdbusy:1;
++    u32 pad:29;
++    u32 swrcmpl:1;
++} sdc_sts_reg;
++typedef struct {
++    u32 val;
++} sdc_resp0_reg;
++typedef struct {
++    u32 val;	
++} sdc_resp1_reg;
++typedef struct {
++    u32 val;	
++} sdc_resp2_reg;
++typedef struct {
++    u32 val;	
++} sdc_resp3_reg;
++typedef struct {
++    u32 num;	
++} sdc_blknum_reg;
++typedef struct {
++    u32 sts;
++} sdc_csts_reg;
++typedef struct {
++    u32 sts;
++} sdc_cstsen_reg;
++typedef struct {
++    u32 datcrcsts:8;
++    u32 ddrcrcsts:4;
++    u32 pad:20;
++} sdc_datcrcsts_reg;
++typedef struct {
++    u32 bootstart:1;
++    u32 bootstop:1;
++    u32 bootmode:1;
++    u32 pad1:9;
++    u32 bootwaidly:3;
++    u32 bootsupp:1;
++    u32 pad2:16;
++} emmc_cfg0_reg;
++typedef struct {
++    u32 bootcrctmc:16;
++    u32 pad:4;
++    u32 bootacktmc:12;
++} emmc_cfg1_reg;
++typedef struct {
++    u32 bootcrcerr:1;
++    u32 bootackerr:1;
++    u32 bootdattmo:1;
++    u32 bootacktmo:1;
++    u32 bootupstate:1;
++    u32 bootackrcv:1;
++    u32 bootdatrcv:1;
++    u32 pad:25;
++} emmc_sts_reg;
++typedef struct {
++    u32 bootrst:1;
++    u32 pad:31;
++} emmc_iocon_reg;
++typedef struct {
++    u32 val;
++} msdc_acmd_resp_reg;
++typedef struct {
++    u32 tunesel:4;
++    u32 pad:28;
++} msdc_acmd19_trg_reg;
++typedef struct {
++    u32 val;
++} msdc_acmd19_sts_reg;
++typedef struct {
++    u32 addr;
++} msdc_dma_sa_reg;
++typedef struct {
++    u32 addr;
++} msdc_dma_ca_reg;
++typedef struct {
++    u32 start:1;
++    u32 stop:1;
++    u32 resume:1;
++    u32 pad1:5;
++    u32 mode:1;
++    u32 pad2:1;
++    u32 lastbuf:1;
++    u32 pad3:1;
++    u32 brustsz:3;
++    u32 pad4:1;
++    u32 xfersz:16;
++} msdc_dma_ctrl_reg;
++typedef struct {
++    u32 status:1;
++    u32 decsen:1;
++    u32 pad1:2;
++    u32 bdcsen:1;
++    u32 gpdcsen:1;
++    u32 pad2:26;
++} msdc_dma_cfg_reg;
++typedef struct {
++    u32 sel:16;
++    u32 pad2:16;
++} msdc_dbg_sel_reg;
++typedef struct {
++    u32 val;
++} msdc_dbg_out_reg;
++typedef struct {
++    u32 clkdrvn:3;
++    u32 rsv0:1;
++    u32 clkdrvp:3;
++    u32 rsv1:1;
++    u32 clksr:1;
++    u32 rsv2:7;
++    u32 clkpd:1;    
++    u32 clkpu:1;
++    u32 clksmt:1;
++    u32 clkies:1;
++    u32 clktdsel:4;
++    u32 clkrdsel:8;
++} msdc_pad_ctl0_reg;
++typedef struct {
++    u32 cmddrvn:3;
++    u32 rsv0:1;    
++    u32 cmddrvp:3;
++    u32 rsv1:1;
++    u32 cmdsr:1;
++    u32 rsv2:7;
++    u32 cmdpd:1;    
++    u32 cmdpu:1;
++    u32 cmdsmt:1;
++    u32 cmdies:1;
++    u32 cmdtdsel:4;
++    u32 cmdrdsel:8;
++} msdc_pad_ctl1_reg;
++typedef struct {
++    u32 datdrvn:3;
++    u32 rsv0:1;
++    u32 datdrvp:3;
++    u32 rsv1:1;
++    u32 datsr:1;
++    u32 rsv2:7;
++    u32 datpd:1;    
++    u32 datpu:1;
++    u32 datsmt:1;
++    u32 daties:1;
++    u32 dattdsel:4;
++    u32 datrdsel:8;
++} msdc_pad_ctl2_reg;
++typedef struct {
++    u32 wrrxdly:3;
++    u32 pad1:5;
++    u32 rdrxdly:8;
++    u32 pad2:16;
++} msdc_pad_tune_reg;
++typedef struct {
++    u32 dat0:5;
++    u32 rsv0:3;
++    u32 dat1:5;
++    u32 rsv1:3;
++    u32 dat2:5;
++    u32 rsv2:3;
++    u32 dat3:5;
++    u32 rsv3:3;    
++} msdc_dat_rddly0;
++typedef struct {
++    u32 dat4:5;
++    u32 rsv4:3;
++    u32 dat5:5;
++    u32 rsv5:3;
++    u32 dat6:5;
++    u32 rsv6:3;
++    u32 dat7:5;
++    u32 rsv7:3;
++} msdc_dat_rddly1;
++typedef struct {
++    u32 dbg0sel:8;
++    u32 dbg1sel:6;
++    u32 pad1:2;
++    u32 dbg2sel:6;
++    u32 pad2:2;
++    u32 dbg3sel:6;
++    u32 pad3:2;
++} msdc_hw_dbg_reg;
++typedef struct {
++    u32 val;
++} msdc_version_reg;
++typedef struct {
++    u32 val;
++} msdc_eco_ver_reg;
++
++struct msdc_regs {
++    msdc_cfg_reg        msdc_cfg;      /* base+0x00h */
++    msdc_iocon_reg      msdc_iocon;    /* base+0x04h */
++    msdc_ps_reg         msdc_ps;       /* base+0x08h */
++    msdc_int_reg        msdc_int;      /* base+0x0ch */
++    msdc_inten_reg      msdc_inten;    /* base+0x10h */
++    msdc_fifocs_reg     msdc_fifocs;   /* base+0x14h */
++    msdc_txdat_reg      msdc_txdat;    /* base+0x18h */
++    msdc_rxdat_reg      msdc_rxdat;    /* base+0x1ch */
++    u32                 rsv1[4];
++    sdc_cfg_reg         sdc_cfg;       /* base+0x30h */
++    sdc_cmd_reg         sdc_cmd;       /* base+0x34h */
++    sdc_arg_reg         sdc_arg;       /* base+0x38h */
++    sdc_sts_reg         sdc_sts;       /* base+0x3ch */
++    sdc_resp0_reg       sdc_resp0;     /* base+0x40h */
++    sdc_resp1_reg       sdc_resp1;     /* base+0x44h */
++    sdc_resp2_reg       sdc_resp2;     /* base+0x48h */
++    sdc_resp3_reg       sdc_resp3;     /* base+0x4ch */
++    sdc_blknum_reg      sdc_blknum;    /* base+0x50h */
++    u32                 rsv2[1];
++    sdc_csts_reg        sdc_csts;      /* base+0x58h */
++    sdc_cstsen_reg      sdc_cstsen;    /* base+0x5ch */
++    sdc_datcrcsts_reg   sdc_dcrcsta;   /* base+0x60h */
++    u32                 rsv3[3];
++    emmc_cfg0_reg       emmc_cfg0;     /* base+0x70h */
++    emmc_cfg1_reg       emmc_cfg1;     /* base+0x74h */
++    emmc_sts_reg        emmc_sts;      /* base+0x78h */
++    emmc_iocon_reg      emmc_iocon;    /* base+0x7ch */
++    msdc_acmd_resp_reg  acmd_resp;     /* base+0x80h */
++    msdc_acmd19_trg_reg acmd19_trg;    /* base+0x84h */
++    msdc_acmd19_sts_reg acmd19_sts;    /* base+0x88h */
++    u32                 rsv4[1];
++    msdc_dma_sa_reg     dma_sa;        /* base+0x90h */
++    msdc_dma_ca_reg     dma_ca;        /* base+0x94h */
++    msdc_dma_ctrl_reg   dma_ctrl;      /* base+0x98h */
++    msdc_dma_cfg_reg    dma_cfg;       /* base+0x9ch */
++    msdc_dbg_sel_reg    dbg_sel;       /* base+0xa0h */
++    msdc_dbg_out_reg    dbg_out;       /* base+0xa4h */
++    u32                 rsv5[2];
++    u32                 patch0;        /* base+0xb0h */
++    u32                 patch1;        /* base+0xb4h */
++    u32                 rsv6[10];
++    msdc_pad_ctl0_reg   pad_ctl0;      /* base+0xe0h */
++    msdc_pad_ctl1_reg   pad_ctl1;      /* base+0xe4h */
++    msdc_pad_ctl2_reg   pad_ctl2;      /* base+0xe8h */
++    msdc_pad_tune_reg   pad_tune;      /* base+0xech */
++    msdc_dat_rddly0     dat_rddly0;    /* base+0xf0h */
++    msdc_dat_rddly1     dat_rddly1;    /* base+0xf4h */
++    msdc_hw_dbg_reg     hw_dbg;        /* base+0xf8h */
++    u32                 rsv7[1];       
++    msdc_version_reg    version;       /* base+0x100h */
++    msdc_eco_ver_reg    eco_ver;       /* base+0x104h */
++};
++
++struct scatterlist_ex {
++    u32 cmd;
++    u32 arg;
++    u32 sglen;
++    struct scatterlist *sg;
++};
++
++#define DMA_FLAG_NONE       (0x00000000)
++#define DMA_FLAG_EN_CHKSUM  (0x00000001)
++#define DMA_FLAG_PAD_BLOCK  (0x00000002)
++#define DMA_FLAG_PAD_DWORD  (0x00000004)
++
++struct msdc_dma {
++    u32 flags;                   /* flags */
++    u32 xfersz;                  /* xfer size in bytes */
++    u32 sglen;                   /* size of scatter list */
++    u32 blklen;                  /* block size */
++    struct scatterlist *sg;      /* I/O scatter list */
++    struct scatterlist_ex *esg;  /* extended I/O scatter list */
++    u8  mode;                    /* dma mode        */
++    u8  burstsz;                 /* burst size      */
++    u8  intr;                    /* dma done interrupt */
++    u8  padding;                 /* padding */
++    u32 cmd;                     /* enhanced mode command */
++    u32 arg;                     /* enhanced mode arg */
++    u32 rsp;                     /* enhanced mode command response */
++    u32 autorsp;                 /* auto command response */
++
++    gpd_t *gpd;                  /* pointer to gpd array */
++    bd_t  *bd;                   /* pointer to bd array */
++    dma_addr_t gpd_addr;         /* the physical address of gpd array */
++    dma_addr_t bd_addr;          /* the physical address of bd array */
++    u32 used_gpd;                /* the number of used gpd elements */
++    u32 used_bd;                 /* the number of used bd elements */
++};
++
++struct msdc_host
++{
++    struct msdc_hw              *hw;
++
++    struct mmc_host             *mmc;           /* mmc structure */
++    struct mmc_command          *cmd;
++    struct mmc_data             *data;
++    struct mmc_request          *mrq; 
++    int                         cmd_rsp;
++    int                         cmd_rsp_done;
++    int                         cmd_r1b_done;
++
++    int                         error; 
++    spinlock_t                  lock;           /* mutex */
++    struct semaphore            sem; 
++
++    u32                         blksz;          /* host block size */
++    u32                         base;           /* host base address */    
++    int                         id;             /* host id */
++    int                         pwr_ref;        /* core power reference count */
++
++    u32                         xfer_size;      /* total transferred size */
++
++    struct msdc_dma             dma;            /* dma channel */
++    u32                         dma_addr;       /* dma transfer address */
++    u32                         dma_left_size;  /* dma transfer left size */
++    u32                         dma_xfer_size;  /* dma transfer size in bytes */
++    int                         dma_xfer;       /* dma transfer mode */
++
++    u32                         timeout_ns;     /* data timeout ns */
++    u32                         timeout_clks;   /* data timeout clks */
++
++    atomic_t                    abort;          /* abort transfer */
++
++    int                         irq;            /* host interrupt */
++
++    struct tasklet_struct       card_tasklet;
++
++    struct completion           cmd_done;
++    struct completion           xfer_done;
++    struct pm_message           pm_state;
++
++    u32                         mclk;           /* mmc subsystem clock */
++    u32                         hclk;           /* host clock speed */		
++    u32                         sclk;           /* SD/MS clock speed */
++    u8                          core_clkon;     /* Host core clock on ? */
++    u8                          card_clkon;     /* Card clock on ? */
++    u8                          core_power;     /* core power */    
++    u8                          power_mode;     /* host power mode */
++    u8                          card_inserted;  /* card inserted ? */
++    u8                          suspend;        /* host suspended ? */    
++    u8                          reserved;
++    u8                          app_cmd;        /* for app command */     
++    u32                         app_cmd_arg;    
++    u64                         starttime;
++};
++
++static inline unsigned int uffs(unsigned int x)
++{
++    unsigned int r = 1;
++
++    if (!x)
++        return 0;
++    if (!(x & 0xffff)) {
++        x >>= 16;
++        r += 16;
++    }
++    if (!(x & 0xff)) {
++        x >>= 8;
++        r += 8;
++    }
++    if (!(x & 0xf)) {
++        x >>= 4;
++        r += 4;
++    }
++    if (!(x & 3)) {
++        x >>= 2;
++        r += 2;
++    }
++    if (!(x & 1)) {
++        x >>= 1;
++        r += 1;
++    }
++    return r;
++}
++#define sdr_read8(reg)           __raw_readb(reg)
++#define sdr_read16(reg)          __raw_readw(reg)
++#define sdr_read32(reg)          __raw_readl(reg)
++#define sdr_write8(reg,val)      __raw_writeb(val,reg)
++#define sdr_write16(reg,val)     __raw_writew(val,reg)
++#define sdr_write32(reg,val)     __raw_writel(val,reg)
++
++#define sdr_set_bits(reg,bs)     ((*(volatile u32*)(reg)) |= (u32)(bs))
++#define sdr_clr_bits(reg,bs)     ((*(volatile u32*)(reg)) &= ~((u32)(bs)))
++
++#define sdr_set_field(reg,field,val) \
++    do {	\
++        volatile unsigned int tv = sdr_read32(reg);	\
++        tv &= ~(field); \
++        tv |= ((val) << (uffs((unsigned int)field) - 1)); \
++        sdr_write32(reg,tv); \
++    } while(0)
++#define sdr_get_field(reg,field,val) \
++    do {	\
++        volatile unsigned int tv = sdr_read32(reg);	\
++        val = ((tv & (field)) >> (uffs((unsigned int)field) - 1)); \
++    } while(0)
++
++#endif
++
+diff --git a/drivers/mmc/host/sdhci-mt7620.c b/drivers/mmc/host/sdhci-mt7620.c
+new file mode 100644
+index 0000000..a3cb5e4
+--- /dev/null
++++ b/drivers/mmc/host/sdhci-mt7620.c
+@@ -0,0 +1,2314 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ *
++ * MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/spinlock.h>
++#include <linux/timer.h>
++#include <linux/ioport.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/of_platform.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/blkdev.h>
++#include <linux/slab.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/card.h>
++#include <linux/mmc/core.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/sd.h>
++#include <linux/mmc/sdio.h>
++#include <linux/dma-mapping.h>
++
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/version.h>
++#include <linux/pm.h>
++
++#define MSDC_SMPL_FALLING   (1)
++#define MSDC_CD_PIN_EN      (1 << 0)  /* card detection pin is wired   */
++#define MSDC_WP_PIN_EN      (1 << 1)  /* write protection pin is wired */
++#define MSDC_REMOVABLE      (1 << 5)  /* removable slot                */
++#define MSDC_SYS_SUSPEND    (1 << 6)  /* suspended by system           */
++#define MSDC_HIGHSPEED      (1 << 7)
++
++#define IRQ_SDC 22
++
++#include <asm/dma.h>
++
++#include "mt6575_sd.h"
++
++#define DRV_NAME            "mtk-sd"
++
++#define HOST_MAX_NUM        (1) /* +/- by chhung */
++
++#define HOST_MAX_MCLK       (48000000) /* +/- by chhung */
++#define HOST_MIN_MCLK       (260000)
++
++#define HOST_MAX_BLKSZ      (2048)
++
++#define MSDC_OCR_AVAIL      (MMC_VDD_28_29 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33)
++
++#define GPIO_PULL_DOWN      (0)
++#define GPIO_PULL_UP        (1)
++
++#define DEFAULT_DEBOUNCE    (8)       /* 8 cycles */
++#define DEFAULT_DTOC        (40)      /* data timeout counter. 65536x40 sclk. */
++
++#define CMD_TIMEOUT         (HZ/10)     /* 100ms */
++#define DAT_TIMEOUT         (HZ/2 * 5)  /* 500ms x5 */
++
++#define MAX_DMA_CNT         (64 * 1024 - 512)   /* a single transaction for WIFI may be 50K*/
++
++#define MAX_GPD_NUM         (1 + 1)  /* one null gpd */
++#define MAX_BD_NUM          (1024)
++#define MAX_BD_PER_GPD      (MAX_BD_NUM)
++
++#define MAX_HW_SGMTS        (MAX_BD_NUM)
++#define MAX_PHY_SGMTS       (MAX_BD_NUM)
++#define MAX_SGMT_SZ         (MAX_DMA_CNT)
++#define MAX_REQ_SZ          (MAX_SGMT_SZ * 8)  
++
++#ifdef MT6575_SD_DEBUG
++static struct msdc_regs *msdc_reg[HOST_MAX_NUM];
++#endif 
++
++//=================================
++#define PERI_MSDC0_PDN      (15)
++//#define PERI_MSDC1_PDN    (16)
++//#define PERI_MSDC2_PDN    (17)
++//#define PERI_MSDC3_PDN    (18)
++
++struct msdc_host *msdc_6575_host[] = {NULL,NULL,NULL,NULL};
++
++struct msdc_hw msdc0_hw = {
++	.clk_src        = 0,
++	.cmd_edge       = MSDC_SMPL_FALLING,
++	.data_edge      = MSDC_SMPL_FALLING,
++	.clk_drv        = 4,
++	.cmd_drv        = 4,
++	.dat_drv        = 4,
++	.data_pins      = 4,
++	.data_offset    = 0,
++	.flags          = MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED,
++};
++
++static struct resource mtk_sd_resources[] = {
++	[0] = {
++		.start  = 0xb0130000,
++		.end    = 0xb0133fff,
++		.flags  = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start  = IRQ_SDC,	/*FIXME*/
++		.end    = IRQ_SDC,	/*FIXME*/
++		.flags  = IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device mtk_sd_device = {
++	.name           = "mtk-sd",
++	.id             = 0,
++	.num_resources  = ARRAY_SIZE(mtk_sd_resources),
++	.resource       = mtk_sd_resources,
++};
++/* end of +++ */
++
++static int msdc_rsp[] = {
++    0,  /* RESP_NONE */
++    1,  /* RESP_R1 */
++    2,  /* RESP_R2 */
++    3,  /* RESP_R3 */
++    4,  /* RESP_R4 */
++    1,  /* RESP_R5 */
++    1,  /* RESP_R6 */
++    1,  /* RESP_R7 */
++    7,  /* RESP_R1b */
++};
++
++/* For Inhanced DMA */
++#define msdc_init_gpd_ex(gpd,extlen,cmd,arg,blknum) \
++    do { \
++        ((gpd_t*)gpd)->extlen = extlen; \
++        ((gpd_t*)gpd)->cmd    = cmd; \
++        ((gpd_t*)gpd)->arg    = arg; \
++        ((gpd_t*)gpd)->blknum = blknum; \
++    }while(0)
++    
++#define msdc_init_bd(bd, blkpad, dwpad, dptr, dlen) \
++    do { \
++        BUG_ON(dlen > 0xFFFFUL); \
++        ((bd_t*)bd)->blkpad = blkpad; \
++        ((bd_t*)bd)->dwpad  = dwpad; \
++        ((bd_t*)bd)->ptr    = (void*)dptr; \
++        ((bd_t*)bd)->buflen = dlen; \
++    }while(0)
++
++#define msdc_txfifocnt()   ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >> 16)
++#define msdc_rxfifocnt()   ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_RXCNT) >> 0)
++#define msdc_fifo_write32(v)   sdr_write32(MSDC_TXDATA, (v))
++#define msdc_fifo_write8(v)    sdr_write8(MSDC_TXDATA, (v))
++#define msdc_fifo_read32()   sdr_read32(MSDC_RXDATA)
++#define msdc_fifo_read8()    sdr_read8(MSDC_RXDATA)	
++
++
++#define msdc_dma_on()        sdr_clr_bits(MSDC_CFG, MSDC_CFG_PIO)
++#define msdc_dma_off()       sdr_set_bits(MSDC_CFG, MSDC_CFG_PIO)
++
++#define msdc_retry(expr,retry,cnt) \
++    do { \
++        int backup = cnt; \
++        while (retry) { \
++            if (!(expr)) break; \
++            if (cnt-- == 0) { \
++                retry--; mdelay(1); cnt = backup; \
++            } \
++        } \
++        WARN_ON(retry == 0); \
++    } while(0)
++
++#if 0 /* +/- chhung */
++#define msdc_reset() \
++    do { \
++        int retry = 3, cnt = 1000; \
++        sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
++        dsb(); \
++        msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
++    } while(0)
++#else
++#define msdc_reset() \
++    do { \
++        int retry = 3, cnt = 1000; \
++        sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
++        msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
++    } while(0)
++#endif /* end of +/- */
++
++#define msdc_clr_int() \
++    do { \
++        volatile u32 val = sdr_read32(MSDC_INT); \
++        sdr_write32(MSDC_INT, val); \
++    } while(0)
++
++#define msdc_clr_fifo() \
++    do { \
++        int retry = 3, cnt = 1000; \
++        sdr_set_bits(MSDC_FIFOCS, MSDC_FIFOCS_CLR); \
++        msdc_retry(sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_CLR, retry, cnt); \
++    } while(0)
++
++#define msdc_irq_save(val) \
++    do { \
++        val = sdr_read32(MSDC_INTEN); \
++        sdr_clr_bits(MSDC_INTEN, val); \
++    } while(0)
++	
++#define msdc_irq_restore(val) \
++    do { \
++        sdr_set_bits(MSDC_INTEN, val); \
++    } while(0)
++
++/* clock source for host: global */
++static u32 hclks[] = {48000000}; /* +/- by chhung */
++
++//============================================
++// the power for msdc host controller: global
++//    always keep the VMC on. 
++//============================================
++#define msdc_vcore_on(host) \
++    do { \
++        printk("[+]VMC ref. count<%d>\n", ++host->pwr_ref); \
++        (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD"); \
++    } while (0)
++#define msdc_vcore_off(host) \
++    do { \
++        printk("[-]VMC ref. count<%d>\n", --host->pwr_ref); \
++        (void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD"); \
++    } while (0)
++
++//====================================
++// the vdd output for card: global 
++//   always keep the VMCH on. 
++//==================================== 
++#define msdc_vdd_on(host) \
++    do { \
++        (void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD"); \
++    } while (0)   
++#define msdc_vdd_off(host) \
++    do { \
++        (void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \
++    } while (0)      
++
++#define sdc_is_busy()          (sdr_read32(SDC_STS) & SDC_STS_SDCBUSY)
++#define sdc_is_cmd_busy()      (sdr_read32(SDC_STS) & SDC_STS_CMDBUSY)
++
++#define sdc_send_cmd(cmd,arg) \
++    do { \
++        sdr_write32(SDC_ARG, (arg)); \
++        sdr_write32(SDC_CMD, (cmd)); \
++    } while(0)
++
++// can modify to read h/w register.
++//#define is_card_present(h)   ((sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1);
++#define is_card_present(h)     (((struct msdc_host*)(h))->card_inserted)
++
++/* +++ chhung */
++#ifndef __ASSEMBLY__
++#define PHYSADDR(a)             (((unsigned long)(a)) & 0x1fffffff)
++#else
++#define PHYSADDR(a)             ((a) & 0x1fffffff)
++#endif
++/* end of +++ */
++static unsigned int msdc_do_command(struct msdc_host   *host, 
++                                      struct mmc_command *cmd,
++                                      int                 tune,
++                                      unsigned long       timeout);  
++                                     
++static int msdc_tune_cmdrsp(struct msdc_host*host,struct mmc_command *cmd);
++
++#ifdef MT6575_SD_DEBUG
++static void msdc_dump_card_status(struct msdc_host *host, u32 status)
++{
++    static char *state[] = {
++        "Idle",			/* 0 */
++        "Ready",		/* 1 */
++        "Ident",		/* 2 */
++        "Stby",			/* 3 */
++        "Tran",			/* 4 */
++        "Data",			/* 5 */
++        "Rcv",			/* 6 */
++        "Prg",			/* 7 */
++        "Dis",			/* 8 */
++        "Reserved",		/* 9 */
++        "Reserved",		/* 10 */
++        "Reserved",		/* 11 */
++        "Reserved",		/* 12 */
++        "Reserved",		/* 13 */
++        "Reserved",		/* 14 */
++        "I/O mode",		/* 15 */
++    };
++    if (status & R1_OUT_OF_RANGE)
++        printk("[CARD_STATUS] Out of Range\n");
++    if (status & R1_ADDRESS_ERROR)
++        printk("[CARD_STATUS] Address Error\n");
++    if (status & R1_BLOCK_LEN_ERROR)
++        printk("[CARD_STATUS] Block Len Error\n");
++    if (status & R1_ERASE_SEQ_ERROR)
++        printk("[CARD_STATUS] Erase Seq Error\n");
++    if (status & R1_ERASE_PARAM)
++        printk("[CARD_STATUS] Erase Param\n");
++    if (status & R1_WP_VIOLATION)
++        printk("[CARD_STATUS] WP Violation\n");
++    if (status & R1_CARD_IS_LOCKED)
++        printk("[CARD_STATUS] Card is Locked\n");
++    if (status & R1_LOCK_UNLOCK_FAILED)
++        printk("[CARD_STATUS] Lock/Unlock Failed\n");
++    if (status & R1_COM_CRC_ERROR)
++        printk("[CARD_STATUS] Command CRC Error\n");
++    if (status & R1_ILLEGAL_COMMAND)
++        printk("[CARD_STATUS] Illegal Command\n");
++    if (status & R1_CARD_ECC_FAILED)
++        printk("[CARD_STATUS] Card ECC Failed\n");
++    if (status & R1_CC_ERROR)
++        printk("[CARD_STATUS] CC Error\n");
++    if (status & R1_ERROR)
++        printk("[CARD_STATUS] Error\n");
++    if (status & R1_UNDERRUN)
++        printk("[CARD_STATUS] Underrun\n");
++    if (status & R1_OVERRUN)
++        printk("[CARD_STATUS] Overrun\n");
++    if (status & R1_CID_CSD_OVERWRITE)
++        printk("[CARD_STATUS] CID/CSD Overwrite\n");
++    if (status & R1_WP_ERASE_SKIP)
++        printk("[CARD_STATUS] WP Eraser Skip\n");
++    if (status & R1_CARD_ECC_DISABLED)
++        printk("[CARD_STATUS] Card ECC Disabled\n");
++    if (status & R1_ERASE_RESET)
++        printk("[CARD_STATUS] Erase Reset\n");
++    if (status & R1_READY_FOR_DATA)
++        printk("[CARD_STATUS] Ready for Data\n");
++    if (status & R1_SWITCH_ERROR)
++        printk("[CARD_STATUS] Switch error\n");
++    if (status & R1_APP_CMD)
++        printk("[CARD_STATUS] App Command\n");
++    
++    printk("[CARD_STATUS] '%s' State\n", state[R1_CURRENT_STATE(status)]);
++}
++
++static void msdc_dump_ocr_reg(struct msdc_host *host, u32 resp)
++{
++    if (resp & (1 << 7))
++        printk("[OCR] Low Voltage Range\n");
++    if (resp & (1 << 15))
++        printk("[OCR] 2.7-2.8 volt\n");
++    if (resp & (1 << 16))
++        printk("[OCR] 2.8-2.9 volt\n");
++    if (resp & (1 << 17))
++        printk("[OCR] 2.9-3.0 volt\n");
++    if (resp & (1 << 18))
++        printk("[OCR] 3.0-3.1 volt\n");
++    if (resp & (1 << 19))
++        printk("[OCR] 3.1-3.2 volt\n");
++    if (resp & (1 << 20))
++        printk("[OCR] 3.2-3.3 volt\n");
++    if (resp & (1 << 21))
++        printk("[OCR] 3.3-3.4 volt\n");
++    if (resp & (1 << 22))
++        printk("[OCR] 3.4-3.5 volt\n");
++    if (resp & (1 << 23))
++        printk("[OCR] 3.5-3.6 volt\n");
++    if (resp & (1 << 24))
++        printk("[OCR] Switching to 1.8V Accepted (S18A)\n");
++    if (resp & (1 << 30))
++        printk("[OCR] Card Capacity Status (CCS)\n");
++    if (resp & (1 << 31))
++        printk("[OCR] Card Power Up Status (Idle)\n");
++    else
++        printk("[OCR] Card Power Up Status (Busy)\n");
++}
++
++static void msdc_dump_rca_resp(struct msdc_host *host, u32 resp)
++{
++    u32 status = (((resp >> 15) & 0x1) << 23) |
++                 (((resp >> 14) & 0x1) << 22) |
++                 (((resp >> 13) & 0x1) << 19) |
++                   (resp & 0x1fff);
++
++    printk("[RCA] 0x%.4x\n", resp >> 16);
++    
++    msdc_dump_card_status(host, status);
++}
++
++static void msdc_dump_io_resp(struct msdc_host *host, u32 resp)
++{
++    u32 flags = (resp >> 8) & 0xFF;
++    char *state[] = {"DIS", "CMD", "TRN", "RFU"};
++
++    if (flags & (1 << 7))
++        printk("[IO] COM_CRC_ERR\n");
++    if (flags & (1 << 6))
++        printk("[IO] Illgal command\n");
++    if (flags & (1 << 3))
++        printk("[IO] Error\n");
++    if (flags & (1 << 2))
++        printk("[IO] RFU\n");
++    if (flags & (1 << 1))
++        printk("[IO] Function number error\n");
++    if (flags & (1 << 0))
++        printk("[IO] Out of range\n");
++
++    printk("[IO] State: %s, Data:0x%x\n", state[(resp >> 12) & 0x3], resp & 0xFF);
++}
++#endif
++
++static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
++{
++	u32 base = host->base;
++	u32 timeout, clk_ns;
++
++	host->timeout_ns = ns;
++	host->timeout_clks = clks;
++
++	clk_ns = 1000000000UL / host->sclk;
++	timeout = ns / clk_ns + clks;
++	timeout = timeout >> 16; /* in 65536 sclk cycle unit */
++	timeout = timeout > 1 ? timeout - 1 : 0;
++	timeout = timeout > 255 ? 255 : timeout;
++
++	sdr_set_field(SDC_CFG, SDC_CFG_DTOC, timeout);
++
++/*	printk("Set read data timeout: %dns %dclks -> %d x 65536 cycles\n",
++		ns, clks, timeout + 1);*/
++}
++
++static void msdc_eirq_sdio(void *data)
++{
++	struct msdc_host *host = (struct msdc_host *)data;
++
++//	printk("SDIO EINT\n");
++
++	mmc_signal_sdio_irq(host->mmc);
++}
++
++static void msdc_eirq_cd(void *data)
++{
++	struct msdc_host *host = (struct msdc_host *)data;
++
++//	printk("CD EINT\n");
++
++	tasklet_hi_schedule(&host->card_tasklet);
++}
++
++static void msdc_tasklet_card(unsigned long arg)
++{
++	struct msdc_host *host = (struct msdc_host *)arg;
++	struct msdc_hw *hw = host->hw;
++	u32 base = host->base;
++	u32 inserted;
++	u32 status = 0;
++
++	spin_lock(&host->lock);
++
++	if (hw->get_cd_status) {
++		inserted = hw->get_cd_status();
++	} else {
++		status = sdr_read32(MSDC_PS);
++		inserted = (status & MSDC_PS_CDSTS) ? 0 : 1;
++	}
++
++	host->card_inserted = inserted;
++
++	if (!host->suspend) {
++		host->mmc->f_max = HOST_MAX_MCLK;
++		mmc_detect_change(host->mmc, msecs_to_jiffies(20));
++	}
++
++//	printk("card found<%s>\n", inserted ? "inserted" : "removed");
++
++	spin_unlock(&host->lock);
++}
++
++static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
++{
++	u32 base = host->base;
++	u32 hclk = host->hclk;
++	u32 mode, flags, div, sclk;
++
++	if (!hz) {
++//		printk("set mclk to 0!!!\n");
++		msdc_reset();
++		return;
++	}
++
++	msdc_irq_save(flags);
++
++	if (ddr) {
++		mode = 0x2;
++		if (hz >= (hclk >> 2)) {
++			div = 1;
++			sclk = hclk >> 2;
++		} else {
++			div  = (hclk + ((hz << 2) - 1)) / (hz << 2);
++			sclk = (hclk >> 2) / div;
++		}
++	} else if (hz >= hclk) {
++		mode = 0x1;
++		div = 0;
++		sclk = hclk;
++	} else {
++		mode = 0x0;
++		if (hz >= (hclk >> 1)) {
++			div = 0;
++			sclk = hclk >> 1;
++		} else {
++			div = (hclk + ((hz << 2) - 1)) / (hz << 2);
++			sclk = (hclk >> 2) / div;
++		}
++	}
++
++	sdr_set_field(MSDC_CFG, MSDC_CFG_CKMOD, mode);
++	sdr_set_field(MSDC_CFG, MSDC_CFG_CKDIV, div);
++
++	while (!(sdr_read32(MSDC_CFG) & MSDC_CFG_CKSTB));
++
++	host->sclk = sclk;
++	host->mclk = hz;
++	msdc_set_timeout(host, host->timeout_ns, host->timeout_clks);
++
++/*	printk("!!! Set<%dKHz> Source<%dKHz> -> sclk<%dKHz>\n",
++		hz / 1000, hclk / 1000, sclk / 1000);
++*/
++	msdc_irq_restore(flags);
++}
++
++static void msdc_abort_data(struct msdc_host *host)
++{
++	u32 base = host->base;
++	struct mmc_command *stop = host->mrq->stop;
++
++//	printk("Need to Abort. dma<%d>\n", host->dma_xfer);
++
++	msdc_reset();
++	msdc_clr_fifo();
++	msdc_clr_int();
++
++	if (stop) {
++//		printk("stop when abort CMD<%d>\n", stop->opcode);
++		msdc_do_command(host, stop, 0, CMD_TIMEOUT);
++	}
++}
++
++static unsigned int msdc_command_start(struct msdc_host *host,
++		struct mmc_command *cmd, int tune, unsigned long timeout)
++{
++	u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
++		MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
++		MSDC_INT_ACMD19_DONE;
++	u32 base = host->base;
++	u32 opcode = cmd->opcode;
++	u32 rawcmd;
++	u32 resp;
++	unsigned long tmo;
++
++	if (opcode == MMC_SEND_OP_COND || opcode == SD_APP_OP_COND)
++		resp = RESP_R3;
++	else if (opcode == MMC_SET_RELATIVE_ADDR || opcode == SD_SEND_RELATIVE_ADDR)
++		resp = (mmc_cmd_type(cmd) == MMC_CMD_BCR) ? RESP_R6 : RESP_R1;
++	else if (opcode == MMC_FAST_IO)
++		resp = RESP_R4;
++	else if (opcode == MMC_GO_IRQ_STATE)
++		resp = RESP_R5;
++	else if (opcode == MMC_SELECT_CARD)
++		resp = (cmd->arg != 0) ? RESP_R1B : RESP_NONE;
++	else if (opcode == SD_IO_RW_DIRECT || opcode == SD_IO_RW_EXTENDED)
++		resp = RESP_R1;
++	else if (opcode == SD_SEND_IF_COND && (mmc_cmd_type(cmd) == MMC_CMD_BCR))
++		resp = RESP_R1;
++	else {
++		switch (mmc_resp_type(cmd)) {
++		case MMC_RSP_R1:
++			resp = RESP_R1;
++			break;
++		case MMC_RSP_R1B:
++			resp = RESP_R1B;
++			break;
++		case MMC_RSP_R2:
++			resp = RESP_R2;
++			break;
++		case MMC_RSP_R3:
++			resp = RESP_R3;
++			break;
++		case MMC_RSP_NONE:
++		default:
++			resp = RESP_NONE;
++			break;
++		}
++	}
++
++	cmd->error = 0;
++	rawcmd = opcode | msdc_rsp[resp] << 7 | host->blksz << 16;
++
++	if (opcode == MMC_READ_MULTIPLE_BLOCK) {
++		rawcmd |= (2 << 11);
++	} else if (opcode == MMC_READ_SINGLE_BLOCK) {
++		rawcmd |= (1 << 11);
++	} else if (opcode == MMC_WRITE_MULTIPLE_BLOCK) {
++		rawcmd |= ((2 << 11) | (1 << 13));
++	} else if (opcode == MMC_WRITE_BLOCK) {
++		rawcmd |= ((1 << 11) | (1 << 13));
++	} else if (opcode == SD_IO_RW_EXTENDED) {
++		if (cmd->data->flags & MMC_DATA_WRITE)
++			rawcmd |= (1 << 13);
++		if (cmd->data->blocks > 1)
++			rawcmd |= (2 << 11);
++		else
++			rawcmd |= (1 << 11);
++	} else if (opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int)-1) {
++		rawcmd |= (1 << 14);
++	} else if ((opcode == SD_APP_SEND_SCR) ||
++			(opcode == SD_APP_SEND_NUM_WR_BLKS) ||
++			(opcode == SD_SWITCH && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
++			(opcode == SD_APP_SD_STATUS && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
++			(opcode == MMC_SEND_EXT_CSD && (mmc_cmd_type(cmd) == MMC_CMD_ADTC))) {
++		rawcmd |= (1 << 11);
++	} else if (opcode == MMC_STOP_TRANSMISSION) {
++		rawcmd |= (1 << 14);
++		rawcmd &= ~(0x0FFF << 16);
++	}
++
++//	printk("CMD<%d><0x%.8x> Arg<0x%.8x>\n", opcode , rawcmd, cmd->arg);
++
++	tmo = jiffies + timeout;
++
++	if (opcode == MMC_SEND_STATUS) {
++		for (;;) {
++			if (!sdc_is_cmd_busy())
++				break;
++
++			if (time_after(jiffies, tmo)) {
++				//printk("XXX cmd_busy timeout: before CMD<%d>\n", opcode);
++				cmd->error = (unsigned int)-ETIMEDOUT;
++				msdc_reset();
++				goto end;
++			}
++		}
++	} else {
++		for (;;) {
++			if (!sdc_is_busy())
++				break;
++			if (time_after(jiffies, tmo)) {
++				//printk("XXX sdc_busy timeout: before CMD<%d>\n", opcode);
++				cmd->error = (unsigned int)-ETIMEDOUT;
++				msdc_reset();
++				goto end;
++			}
++		}
++	}
++
++	//BUG_ON(in_interrupt());
++	host->cmd = cmd;
++	host->cmd_rsp = resp;
++	init_completion(&host->cmd_done);
++	sdr_set_bits(MSDC_INTEN, wints);
++	sdc_send_cmd(rawcmd, cmd->arg);
++
++end:
++	return cmd->error;
++}
++
++static unsigned int msdc_command_resp(struct msdc_host *host, struct mmc_command *cmd,
++				int tune, unsigned long timeout)
++{
++	u32 base = host->base;
++	//u32 opcode = cmd->opcode;
++	u32 resp;
++	u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
++		MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
++		MSDC_INT_ACMD19_DONE;
++
++	resp = host->cmd_rsp;
++
++	BUG_ON(in_interrupt());
++	spin_unlock(&host->lock);
++	if (!wait_for_completion_timeout(&host->cmd_done, 10*timeout)) {
++		//printk("XXX CMD<%d> wait_for_completion timeout ARG<0x%.8x>\n", opcode, cmd->arg);
++		cmd->error = (unsigned int)-ETIMEDOUT;
++		msdc_reset();
++	}
++	spin_lock(&host->lock);
++
++	sdr_clr_bits(MSDC_INTEN, wints);
++	host->cmd = NULL;
++
++	if (!tune)
++		return cmd->error;
++
++	/* memory card CRC */
++	if (host->hw->flags & MSDC_REMOVABLE && cmd->error == (unsigned int)(-EIO) ) {
++		if (sdr_read32(SDC_CMD) & 0x1800) {
++			msdc_abort_data(host);
++		} else {
++			msdc_reset();
++			msdc_clr_fifo();
++			msdc_clr_int();
++		}
++		cmd->error = msdc_tune_cmdrsp(host,cmd);
++	}
++
++	return cmd->error;
++}
++
++static unsigned int msdc_do_command(struct msdc_host *host, struct mmc_command *cmd,
++			int tune, unsigned long timeout)
++{
++	if (!msdc_command_start(host, cmd, tune, timeout))
++		msdc_command_resp(host, cmd, tune, timeout);
++
++	//printk("        return<%d> resp<0x%.8x>\n", cmd->error, cmd->resp[0]);
++	return cmd->error;
++}
++
++static int msdc_pio_abort(struct msdc_host *host, struct mmc_data *data, unsigned long tmo)
++{
++	u32  base = host->base;
++	int  ret = 0;
++
++	if (atomic_read(&host->abort))
++		ret = 1;
++
++	if (time_after(jiffies, tmo)) {
++		data->error = (unsigned int)-ETIMEDOUT;
++		//printk("XXX PIO Data Timeout: CMD<%d>\n", host->mrq->cmd->opcode);
++		ret = 1;
++	}
++
++	if (ret) {
++		msdc_reset();
++		msdc_clr_fifo();
++		msdc_clr_int();
++		//printk("msdc pio find abort\n");
++	}
++
++	return ret;
++}
++
++static int msdc_pio_read(struct msdc_host *host, struct mmc_data *data)
++{
++	struct scatterlist *sg = data->sg;
++	u32  base = host->base;
++	u32  num = data->sg_len;
++	u32 *ptr;
++	u8  *u8ptr;
++	u32  left;
++	u32  count, size = 0;
++	u32  wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++	unsigned long tmo = jiffies + DAT_TIMEOUT;
++
++	sdr_set_bits(MSDC_INTEN, wints);
++	while (num) {
++		left = sg_dma_len(sg);
++		ptr = sg_virt(sg);
++		while (left) {
++			if ((left >=  MSDC_FIFO_THD) && (msdc_rxfifocnt() >= MSDC_FIFO_THD)) {
++				count = MSDC_FIFO_THD >> 2;
++				do {
++					*ptr++ = msdc_fifo_read32();
++				} while (--count);
++				left -= MSDC_FIFO_THD;
++			} else if ((left < MSDC_FIFO_THD) && msdc_rxfifocnt() >= left) {
++				while (left > 3) {
++					*ptr++ = msdc_fifo_read32();
++					left -= 4;
++				}
++
++				u8ptr = (u8 *)ptr;
++				while(left) {
++					* u8ptr++ = msdc_fifo_read8();
++					left--;
++				}
++			}
++
++			if (msdc_pio_abort(host, data, tmo))
++				goto end;
++		}
++		size += sg_dma_len(sg);
++		sg = sg_next(sg); num--;
++	}
++end:
++	data->bytes_xfered += size;
++	//printk("        PIO Read<%d>bytes\n", size);
++
++	sdr_clr_bits(MSDC_INTEN, wints);
++	if(data->error)
++		printk("read pio data->error<%d> left<%d> size<%d>\n", data->error, left, size);
++
++	return data->error;
++}
++
++static int msdc_pio_write(struct msdc_host* host, struct mmc_data *data)
++{
++	u32  base = host->base;
++	struct scatterlist *sg = data->sg;
++	u32  num = data->sg_len;
++	u32 *ptr;
++	u8  *u8ptr;
++	u32  left;
++	u32  count, size = 0;
++	u32  wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++	unsigned long tmo = jiffies + DAT_TIMEOUT;
++
++	sdr_set_bits(MSDC_INTEN, wints);
++	while (num) {
++		left = sg_dma_len(sg);
++		ptr = sg_virt(sg);
++
++		while (left) {
++			if (left >= MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
++				count = MSDC_FIFO_SZ >> 2;
++				do {
++					msdc_fifo_write32(*ptr); ptr++;
++				} while (--count);
++				left -= MSDC_FIFO_SZ;
++			} else if (left < MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
++				while (left > 3) {
++					msdc_fifo_write32(*ptr); ptr++;
++					left -= 4;
++				}
++
++				u8ptr = (u8*)ptr;
++				while( left) {
++					msdc_fifo_write8(*u8ptr);
++					u8ptr++;
++					left--;
++				}
++			}
++
++			if (msdc_pio_abort(host, data, tmo))
++				goto end;
++		}
++		size += sg_dma_len(sg);
++		sg = sg_next(sg); num--;
++	}
++end:
++	data->bytes_xfered += size;
++	//printk("        PIO Write<%d>bytes\n", size);
++	if(data->error)
++		printk("write pio data->error<%d>\n", data->error);
++
++	sdr_clr_bits(MSDC_INTEN, wints);
++
++	return data->error;
++}
++
++static void msdc_dma_start(struct msdc_host *host)
++{
++	u32 base = host->base;
++	u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++
++	sdr_set_bits(MSDC_INTEN, wints);
++	sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1);
++
++	//printk("DMA start\n");
++}
++
++static void msdc_dma_stop(struct msdc_host *host)
++{
++	u32 base = host->base;
++	u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++
++	//printk("DMA status: 0x%.8x\n",sdr_read32(MSDC_DMA_CFG));
++
++	sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1);
++	while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
++	sdr_clr_bits(MSDC_INTEN, wints); /* Not just xfer_comp */
++
++	//printk("DMA stop\n");
++}
++
++static u8 msdc_dma_calcs(u8 *buf, u32 len)
++{
++	u32 i, sum = 0;
++
++	for (i = 0; i < len; i++)
++		sum += buf[i];
++
++	return 0xFF - (u8)sum;
++}
++
++static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
++{
++	u32 base = host->base;
++	u32 sglen = dma->sglen;
++	u32 j, num, bdlen;
++	u8  blkpad, dwpad, chksum;
++	struct scatterlist *sg = dma->sg;
++	gpd_t *gpd;
++	bd_t *bd;
++
++	switch (dma->mode) {
++	case MSDC_MODE_DMA_BASIC:
++		BUG_ON(dma->xfersz > 65535);
++		BUG_ON(dma->sglen != 1);
++		sdr_write32(MSDC_DMA_SA, PHYSADDR(sg_dma_address(sg)));
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_LASTBUF, 1);
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_XFERSZ, sg_dma_len(sg));
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 0);
++		break;
++
++	case MSDC_MODE_DMA_DESC:
++		blkpad = (dma->flags & DMA_FLAG_PAD_BLOCK) ? 1 : 0;
++		dwpad  = (dma->flags & DMA_FLAG_PAD_DWORD) ? 1 : 0;
++		chksum = (dma->flags & DMA_FLAG_EN_CHKSUM) ? 1 : 0;
++
++		num = (sglen + MAX_BD_PER_GPD - 1) / MAX_BD_PER_GPD;
++		BUG_ON(num !=1 );
++
++		gpd = dma->gpd;
++		bd = dma->bd;
++		bdlen = sglen;
++
++		gpd->hwo = 1;  /* hw will clear it */
++		gpd->bdp = 1;
++		gpd->chksum = 0;  /* need to clear first. */
++		gpd->chksum = (chksum ? msdc_dma_calcs((u8 *)gpd, 16) : 0);
++
++		for (j = 0; j < bdlen; j++) {
++			msdc_init_bd(&bd[j], blkpad, dwpad, sg_dma_address(sg), sg_dma_len(sg));
++			if( j == bdlen - 1)
++				bd[j].eol = 1;
++			else
++				bd[j].eol = 0;
++			bd[j].chksum = 0; /* checksume need to clear first */
++			bd[j].chksum = (chksum ? msdc_dma_calcs((u8 *)(&bd[j]), 16) : 0);
++			sg++;
++		}
++
++		dma->used_gpd += 2;
++		dma->used_bd += bdlen;
++
++		sdr_set_field(MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, chksum);
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 1);
++		sdr_write32(MSDC_DMA_SA, PHYSADDR((u32)dma->gpd_addr));
++		break;
++	}
++
++//	printk("DMA_CTRL = 0x%x\n", sdr_read32(MSDC_DMA_CTRL));
++//	printk("DMA_CFG  = 0x%x\n", sdr_read32(MSDC_DMA_CFG));
++//	printk("DMA_SA   = 0x%x\n", sdr_read32(MSDC_DMA_SA));
++
++	return 0;
++}
++
++static void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma,
++			struct scatterlist *sg, unsigned int sglen)
++{
++	BUG_ON(sglen > MAX_BD_NUM);
++
++	dma->sg = sg;
++	dma->flags = DMA_FLAG_EN_CHKSUM;
++	dma->sglen = sglen;
++	dma->xfersz = host->xfer_size;
++	dma->burstsz = MSDC_BRUST_64B;
++
++	if (sglen == 1 && sg_dma_len(sg) <= MAX_DMA_CNT)
++		dma->mode = MSDC_MODE_DMA_BASIC;
++	else
++		dma->mode = MSDC_MODE_DMA_DESC;
++
++//	printk("DMA mode<%d> sglen<%d> xfersz<%d>\n", dma->mode, dma->sglen, dma->xfersz);
++
++	msdc_dma_config(host, dma);
++}
++
++static void msdc_set_blknum(struct msdc_host *host, u32 blknum)
++{
++	u32 base = host->base;
++
++	sdr_write32(SDC_BLK_NUM, blknum);
++}
++
++static int msdc_do_request(struct mmc_host*mmc, struct mmc_request*mrq)
++{
++	struct msdc_host *host = mmc_priv(mmc);
++	struct mmc_command *cmd;
++	struct mmc_data *data;
++	u32 base = host->base;
++	unsigned int left=0;
++	int dma = 0, read = 1, dir = DMA_FROM_DEVICE, send_type=0;
++
++#define SND_DAT 0
++#define SND_CMD 1
++
++	BUG_ON(mmc == NULL);
++	BUG_ON(mrq == NULL);
++
++	host->error = 0;
++	atomic_set(&host->abort, 0);
++
++	cmd  = mrq->cmd;
++	data = mrq->cmd->data;
++
++	if (!data) {
++		send_type = SND_CMD;
++		if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
++			goto done;
++	} else {
++		BUG_ON(data->blksz > HOST_MAX_BLKSZ);
++		send_type=SND_DAT;
++
++		data->error = 0;
++		read = data->flags & MMC_DATA_READ ? 1 : 0;
++		host->data = data;
++		host->xfer_size = data->blocks * data->blksz;
++		host->blksz = data->blksz;
++
++		host->dma_xfer = dma = ((host->xfer_size >= 512) ? 1 : 0);
++
++		if (read)
++			if ((host->timeout_ns != data->timeout_ns) ||
++					(host->timeout_clks != data->timeout_clks))
++				msdc_set_timeout(host, data->timeout_ns, data->timeout_clks);
++
++			msdc_set_blknum(host, data->blocks);
++
++			if (dma) {
++				msdc_dma_on();
++				init_completion(&host->xfer_done);
++
++				if (msdc_command_start(host, cmd, 1, CMD_TIMEOUT) != 0)
++					goto done;
++
++				dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
++				dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
++				msdc_dma_setup(host, &host->dma, data->sg, data->sg_len);
++
++				if (msdc_command_resp(host, cmd, 1, CMD_TIMEOUT) != 0)
++					goto done;
++
++				msdc_dma_start(host);
++
++				spin_unlock(&host->lock);
++				if (!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)) {
++					/*printk("XXX CMD<%d> wait xfer_done<%d> timeout!!\n", cmd->opcode, data->blocks * data->blksz);
++					printk("    DMA_SA   = 0x%x\n", sdr_read32(MSDC_DMA_SA));
++					printk("    DMA_CA   = 0x%x\n", sdr_read32(MSDC_DMA_CA));
++					printk("    DMA_CTRL = 0x%x\n", sdr_read32(MSDC_DMA_CTRL));
++					printk("    DMA_CFG  = 0x%x\n", sdr_read32(MSDC_DMA_CFG));*/
++					data->error = (unsigned int)-ETIMEDOUT;
++
++					msdc_reset();
++					msdc_clr_fifo();
++					msdc_clr_int();
++				}
++				spin_lock(&host->lock);
++				msdc_dma_stop(host);
++			} else {
++				if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
++					goto done;
++
++				if (read) {
++					if (msdc_pio_read(host, data))
++						goto done;
++				} else {
++					if (msdc_pio_write(host, data))
++						goto done;
++				}
++
++			if (!read) {
++				while (1) {
++					left = msdc_txfifocnt();
++					if (left == 0) {
++						break;
++					}
++					if (msdc_pio_abort(host, data, jiffies + DAT_TIMEOUT)) {
++						break;
++					/* Fix me: what about if data error, when stop ? how to? */
++					}
++				}
++			} else {
++				/* Fix me: read case: need to check CRC error */	
++			}
++
++			/* For write case: SDCBUSY and Xfer_Comp will assert when DAT0 not busy. 
++			   For read case : SDCBUSY and Xfer_Comp will assert when last byte read out from FIFO.
++			*/
++
++			/* try not to wait xfer_comp interrupt. 
++			the next command will check SDC_BUSY. 
++			SDC_BUSY means xfer_comp assert 
++			*/ 
++
++		} // PIO mode 
++
++		/* Last: stop transfer */
++		if (data->stop){ 
++			if (msdc_do_command(host, data->stop, 0, CMD_TIMEOUT) != 0) {
++				goto done; 
++			}
++		} 
++	}
++
++done:
++	if (data != NULL) {
++		host->data = NULL;
++		host->dma_xfer = 0;    
++		if (dma != 0) {
++			msdc_dma_off();     
++			host->dma.used_bd  = 0;
++			host->dma.used_gpd = 0;
++			dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
++		}
++		host->blksz = 0;  
++
++	//	printk("CMD<%d> data<%s %s> blksz<%d> block<%d> error<%d>",cmd->opcode, (dma? "dma":"pio\n"), 
++	//		(read ? "read ":"write") ,data->blksz, data->blocks, data->error);                
++	}
++
++	if (mrq->cmd->error) host->error = 0x001;
++	if (mrq->data && mrq->data->error) host->error |= 0x010;     
++	if (mrq->stop && mrq->stop->error) host->error |= 0x100; 
++
++	//if (host->error) printk("host->error<%d>\n", host->error);     
++
++	return host->error;
++}
++
++static int msdc_app_cmd(struct mmc_host *mmc, struct msdc_host *host)
++{
++    struct mmc_command cmd;    
++    struct mmc_request mrq;
++    u32 err; 
++
++    memset(&cmd, 0, sizeof(struct mmc_command));    
++    cmd.opcode = MMC_APP_CMD;    
++#if 0   /* bug: we meet mmc->card is null when ACMD6 */   
++    cmd.arg = mmc->card->rca << 16;
++#else 
++    cmd.arg = host->app_cmd_arg;     
++#endif    
++    cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
++
++    memset(&mrq, 0, sizeof(struct mmc_request));
++    mrq.cmd = &cmd; cmd.mrq = &mrq;
++    cmd.data = NULL;        
++
++    err = msdc_do_command(host, &cmd, 0, CMD_TIMEOUT);     
++    return err;      	
++}
++
++static int msdc_tune_cmdrsp(struct msdc_host*host, struct mmc_command *cmd)
++{
++    int result = -1;
++    u32 base = host->base;
++    u32 rsmpl, cur_rsmpl, orig_rsmpl;
++    u32 rrdly, cur_rrdly = 0, orig_rrdly;
++    u32 skip = 1;
++    
++    /* ==== don't support 3.0 now ====
++           1: R_SMPL[1] 
++           2: PAD_CMD_RESP_RXDLY[26:22] 
++	    ==========================*/
++
++    // save the previous tune result 
++    sdr_get_field(MSDC_IOCON,    MSDC_IOCON_RSPL,        orig_rsmpl);
++    sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, orig_rrdly);
++
++    rrdly = 0; 
++    do {
++        for (rsmpl = 0; rsmpl < 2; rsmpl++) {
++            /* Lv1: R_SMPL[1] */    	
++            cur_rsmpl = (orig_rsmpl + rsmpl) % 2;         
++            if (skip == 1) {
++                skip = 0; 	
++                continue;	
++            }
++            sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, cur_rsmpl); 
++
++            if (host->app_cmd) {
++                result = msdc_app_cmd(host->mmc, host);	
++                if (result) {
++                    //printk("TUNE_CMD app_cmd<%d> failed: RESP_RXDLY<%d>,R_SMPL<%d>\n", 
++                      //   host->mrq->cmd->opcode, cur_rrdly, cur_rsmpl);
++                    continue;
++                } 
++            }          
++            result = msdc_do_command(host, cmd, 0, CMD_TIMEOUT); // not tune.             
++            //printk("TUNE_CMD<%d> %s PAD_CMD_RESP_RXDLY[26:22]<%d> R_SMPL[1]<%d>\n", cmd->opcode,
++//                       (result == 0) ? "PASS" : "FAIL", cur_rrdly, cur_rsmpl);
++                       	
++            if (result == 0) {
++                return 0; 	
++            }                        	
++            if (result != (unsigned int)(-EIO)) { 
++              //  printk("TUNE_CMD<%d> Error<%d> not -EIO\n", cmd->opcode, result);	
++                return result;	 
++            }
++
++            /* should be EIO */
++            if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */ 
++                msdc_abort_data(host);
++            }
++        }
++		
++        /* Lv2: PAD_CMD_RESP_RXDLY[26:22] */              	
++        cur_rrdly = (orig_rrdly + rrdly + 1) % 32;
++        sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, cur_rrdly);		
++    }while (++rrdly < 32);
++	
++    return result;
++}
++
++/* Support SD2.0 Only */
++static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++    struct msdc_host *host = mmc_priv(mmc);
++    u32 base = host->base;
++    u32 ddr=0;
++    u32 dcrc = 0;
++    u32 rxdly, cur_rxdly0, cur_rxdly1;
++    u32 dsmpl, cur_dsmpl,  orig_dsmpl;
++    u32 cur_dat0,  cur_dat1,  cur_dat2,  cur_dat3;
++    u32 cur_dat4,  cur_dat5,  cur_dat6,  cur_dat7;
++    u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
++    u32 orig_dat4, orig_dat5, orig_dat6, orig_dat7;
++    int result = -1;
++    u32 skip = 1;
++
++    sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl);
++	
++    /* Tune Method 2. */
++    sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
++
++    rxdly = 0; 
++    do {
++        for (dsmpl = 0; dsmpl < 2; dsmpl++) {
++            cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
++            if (skip == 1) {
++                skip = 0; 	
++                continue;	
++            }             
++            sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
++
++            if (host->app_cmd) {
++                result = msdc_app_cmd(host->mmc, host);	
++                if (result) {
++                    //printk("TUNE_BREAD app_cmd<%d> failed\n", host->mrq->cmd->opcode);	
++                    continue;
++                } 
++            } 
++            result = msdc_do_request(mmc,mrq);
++            
++            sdr_get_field(SDC_DCRC_STS, SDC_DCRC_STS_POS|SDC_DCRC_STS_NEG, dcrc); /* RO */
++            if (!ddr) dcrc &= ~SDC_DCRC_STS_NEG;
++            //printk("TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>\n",
++                       // (result == 0 && dcrc == 0) ? "PASS" : "FAIL", dcrc,
++                       // sdr_read32(MSDC_DAT_RDDLY0), sdr_read32(MSDC_DAT_RDDLY1), cur_dsmpl);
++
++            /* Fix me: result is 0, but dcrc is still exist */
++            if (result == 0 && dcrc == 0) {
++                goto done;
++            } else {
++                /* there is a case: command timeout, and data phase not processed */
++                if (mrq->data->error != 0 && mrq->data->error != (unsigned int)(-EIO)) {
++                    //printk("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n", 
++                         //      result, mrq->cmd->error, mrq->data->error);	
++                    goto done;     	
++                }
++            }
++        }    
++
++        cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
++        cur_rxdly1 = sdr_read32(MSDC_DAT_RDDLY1);
++
++        /* E1 ECO. YD: Reverse */
++        if (sdr_read32(MSDC_ECO_VER) >= 4) {
++            orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
++            orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
++            orig_dat2 = (cur_rxdly0 >>  8) & 0x1F;
++            orig_dat3 = (cur_rxdly0 >>  0) & 0x1F;
++            orig_dat4 = (cur_rxdly1 >> 24) & 0x1F;
++            orig_dat5 = (cur_rxdly1 >> 16) & 0x1F;
++            orig_dat6 = (cur_rxdly1 >>  8) & 0x1F;
++            orig_dat7 = (cur_rxdly1 >>  0) & 0x1F;
++        } else {   
++            orig_dat0 = (cur_rxdly0 >>  0) & 0x1F;
++            orig_dat1 = (cur_rxdly0 >>  8) & 0x1F;
++            orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
++            orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
++            orig_dat4 = (cur_rxdly1 >>  0) & 0x1F;
++            orig_dat5 = (cur_rxdly1 >>  8) & 0x1F;
++            orig_dat6 = (cur_rxdly1 >> 16) & 0x1F;
++            orig_dat7 = (cur_rxdly1 >> 24) & 0x1F;
++        }
++                
++        if (ddr) {
++            cur_dat0 = (dcrc & (1 << 0) || dcrc & (1 << 8))  ? ((orig_dat0 + 1) % 32) : orig_dat0;
++            cur_dat1 = (dcrc & (1 << 1) || dcrc & (1 << 9))  ? ((orig_dat1 + 1) % 32) : orig_dat1;
++            cur_dat2 = (dcrc & (1 << 2) || dcrc & (1 << 10)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
++            cur_dat3 = (dcrc & (1 << 3) || dcrc & (1 << 11)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
++        } else {
++            cur_dat0 = (dcrc & (1 << 0)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
++            cur_dat1 = (dcrc & (1 << 1)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
++            cur_dat2 = (dcrc & (1 << 2)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
++            cur_dat3 = (dcrc & (1 << 3)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
++        }
++        cur_dat4 = (dcrc & (1 << 4)) ? ((orig_dat4 + 1) % 32) : orig_dat4;
++        cur_dat5 = (dcrc & (1 << 5)) ? ((orig_dat5 + 1) % 32) : orig_dat5;
++        cur_dat6 = (dcrc & (1 << 6)) ? ((orig_dat6 + 1) % 32) : orig_dat6;
++        cur_dat7 = (dcrc & (1 << 7)) ? ((orig_dat7 + 1) % 32) : orig_dat7;
++
++        cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
++        cur_rxdly1 = (cur_dat4 << 24) | (cur_dat5 << 16) | (cur_dat6 << 8) | (cur_dat7 << 0);
++
++        sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
++        sdr_write32(MSDC_DAT_RDDLY1, cur_rxdly1);
++
++    } while (++rxdly < 32);   
++          
++done:
++    return result;
++}
++
++static int msdc_tune_bwrite(struct mmc_host *mmc,struct mmc_request *mrq)
++{
++	  struct msdc_host *host = mmc_priv(mmc);
++    u32 base = host->base;
++
++    u32 wrrdly, cur_wrrdly = 0, orig_wrrdly;
++    u32 dsmpl,  cur_dsmpl,  orig_dsmpl;
++    u32 rxdly,  cur_rxdly0;
++    u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
++    u32 cur_dat0,  cur_dat1,  cur_dat2,  cur_dat3;
++    int result = -1;
++    u32 skip = 1;
++
++    // MSDC_IOCON_DDR50CKD need to check. [Fix me] 
++    
++    sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, orig_wrrdly);
++    sdr_get_field(MSDC_IOCON,    MSDC_IOCON_DSPL,        orig_dsmpl );
++
++    /* Tune Method 2. just DAT0 */  
++    sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
++    cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
++    
++    /* E1 ECO. YD: Reverse */
++    if (sdr_read32(MSDC_ECO_VER) >= 4) {
++        orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
++        orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
++        orig_dat2 = (cur_rxdly0 >>  8) & 0x1F;
++        orig_dat3 = (cur_rxdly0 >>  0) & 0x1F;
++    } else {
++        orig_dat0 = (cur_rxdly0 >>  0) & 0x1F;
++        orig_dat1 = (cur_rxdly0 >>  8) & 0x1F;
++        orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
++        orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
++    }
++
++    rxdly = 0;
++    do {
++        wrrdly = 0;
++        do {    
++            for (dsmpl = 0; dsmpl < 2; dsmpl++) {
++                cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
++                if (skip == 1) {
++                    skip = 0;
++                    continue; 	
++                }    
++                sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
++                
++                if (host->app_cmd) {
++                    result = msdc_app_cmd(host->mmc, host);	
++                    if (result) {
++                        //printk("TUNE_BWRITE app_cmd<%d> failed\n", host->mrq->cmd->opcode);	
++                        continue;
++                    } 
++                }             
++                result = msdc_do_request(mmc,mrq);
++            
++                //printk("TUNE_BWRITE<%s> DSPL<%d> DATWRDLY<%d> MSDC_DAT_RDDLY0<0x%x>\n", 
++                  //        result == 0 ? "PASS" : "FAIL", 
++                    //      cur_dsmpl, cur_wrrdly, cur_rxdly0);
++            
++                if (result == 0) {
++                    goto done;
++                }
++                else {
++                    /* there is a case: command timeout, and data phase not processed */
++                    if (mrq->data->error != (unsigned int)(-EIO)) {
++                        //printk("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n", 
++                        //  &&         result, mrq->cmd->error, mrq->data->error);	
++                        goto done;     	
++                    }
++                }       
++            }
++            cur_wrrdly = (orig_wrrdly + wrrdly + 1) % 32;
++            sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, cur_wrrdly);             
++        } while (++wrrdly < 32); 
++        
++        cur_dat0 = (orig_dat0 + rxdly) % 32; /* only adjust bit-1 for crc */
++        cur_dat1 = orig_dat1;
++        cur_dat2 = orig_dat2;
++        cur_dat3 = orig_dat3;                    
++    
++        cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);       
++        sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);    
++    } while (++rxdly < 32); 
++
++done:
++    return result;
++}
++
++static int msdc_get_card_status(struct mmc_host *mmc, struct msdc_host *host, u32 *status)
++{
++	struct mmc_command cmd;
++	struct mmc_request mrq;
++	u32 err;
++
++	memset(&cmd, 0, sizeof(struct mmc_command));
++	cmd.opcode = MMC_SEND_STATUS;
++	if (mmc->card) {
++		cmd.arg = mmc->card->rca << 16;
++	} else {
++		//printk("cmd13 mmc card is null\n");
++		cmd.arg = host->app_cmd_arg;
++	}
++	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
++
++	memset(&mrq, 0, sizeof(struct mmc_request));
++	mrq.cmd = &cmd; cmd.mrq = &mrq;
++	cmd.data = NULL;
++
++	err = msdc_do_command(host, &cmd, 1, CMD_TIMEOUT);
++
++	if (status)
++		*status = cmd.resp[0];
++
++	return err;
++}
++
++static int msdc_check_busy(struct mmc_host *mmc, struct msdc_host *host)
++{
++	u32 err = 0;
++	u32 status = 0;
++
++	do {
++		err = msdc_get_card_status(mmc, host, &status);
++		if (err)
++			return err;
++		/* need cmd12? */
++		//printk("cmd<13> resp<0x%x>\n", status);
++	} while (R1_CURRENT_STATE(status) == 7);
++
++	return err;
++}
++
++static int msdc_tune_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++	struct msdc_host *host = mmc_priv(mmc);
++	struct mmc_command *cmd;
++	struct mmc_data *data;
++	int ret=0, read;
++
++	cmd  = mrq->cmd;
++	data = mrq->cmd->data;
++
++	read = data->flags & MMC_DATA_READ ? 1 : 0;
++
++	if (read) {
++		if (data->error == (unsigned int)(-EIO))
++			ret = msdc_tune_bread(mmc,mrq);
++	} else {
++		ret = msdc_check_busy(mmc, host);
++		if (ret){
++			//printk("XXX cmd13 wait program done failed\n");
++			return ret;
++		}
++		/* CRC and TO */
++		/* Fix me: don't care card status? */
++		ret = msdc_tune_bwrite(mmc,mrq);
++	}
++
++	return ret;
++}
++
++static void msdc_ops_request(struct mmc_host *mmc,struct mmc_request *mrq)
++{
++	struct msdc_host *host = mmc_priv(mmc);
++
++	if (host->mrq) {
++		//printk("XXX host->mrq<0x%.8x>\n", (int)host->mrq);
++		BUG();
++	}
++	if (!is_card_present(host) || host->power_mode == MMC_POWER_OFF) {
++		//printk("cmd<%d> card<%d> power<%d>\n", mrq->cmd->opcode, is_card_present(host), host->power_mode);
++		mrq->cmd->error = (unsigned int)-ENOMEDIUM;
++		mrq->done(mrq);
++		return;
++	}
++	spin_lock(&host->lock);
++
++	host->mrq = mrq;
++
++	if (msdc_do_request(mmc,mrq))
++		if(host->hw->flags & MSDC_REMOVABLE && mrq->data && mrq->data->error)
++			msdc_tune_request(mmc,mrq);
++
++	if (mrq->cmd->opcode == MMC_APP_CMD) {
++		host->app_cmd = 1;
++		host->app_cmd_arg = mrq->cmd->arg;  /* save the RCA */
++	} else {
++		host->app_cmd = 0;
++	}
++
++	host->mrq = NULL;
++
++	spin_unlock(&host->lock);
++
++	mmc_request_done(mmc, mrq);
++}
++
++/* called by ops.set_ios */
++static void msdc_set_buswidth(struct msdc_host *host, u32 width)
++{
++    u32 base = host->base;
++    u32 val = sdr_read32(SDC_CFG);
++    
++    val &= ~SDC_CFG_BUSWIDTH;
++    
++    switch (width) {
++    default:
++    case MMC_BUS_WIDTH_1:
++        width = 1;
++        val |= (MSDC_BUS_1BITS << 16);
++        break;
++    case MMC_BUS_WIDTH_4:
++        val |= (MSDC_BUS_4BITS << 16);
++        break;
++    case MMC_BUS_WIDTH_8:
++        val |= (MSDC_BUS_8BITS << 16);
++        break;
++    }
++    
++    sdr_write32(SDC_CFG, val);
++
++    //printk("Bus Width = %d\n", width);
++}
++
++/* ops.set_ios */
++static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++	struct msdc_host *host = mmc_priv(mmc);
++	struct msdc_hw *hw=host->hw;
++	u32 base = host->base;
++	u32 ddr = 0;
++
++#ifdef MT6575_SD_DEBUG
++	static char *vdd[] = {
++	"1.50v", "1.55v", "1.60v", "1.65v", "1.70v", "1.80v", "1.90v",
++	"2.00v", "2.10v", "2.20v", "2.30v", "2.40v", "2.50v", "2.60v",
++	"2.70v", "2.80v", "2.90v", "3.00v", "3.10v", "3.20v", "3.30v",
++	"3.40v", "3.50v", "3.60v"		
++	};
++	static char *power_mode[] = {
++	"OFF", "UP", "ON"
++	};
++	static char *bus_mode[] = {
++	"UNKNOWN", "OPENDRAIN", "PUSHPULL"
++	};
++	static char *timing[] = {
++	"LEGACY", "MMC_HS", "SD_HS"
++	};
++
++	/*printk("SET_IOS: CLK(%dkHz), BUS(%s), BW(%u), PWR(%s), VDD(%s), TIMING(%s)\n",
++	ios->clock / 1000, bus_mode[ios->bus_mode],
++	(ios->bus_width == MMC_BUS_WIDTH_4) ? 4 : 1,
++	power_mode[ios->power_mode], vdd[ios->vdd], timing[ios->timing]);*/
++#endif
++
++	msdc_set_buswidth(host, ios->bus_width);
++
++	/* Power control ??? */
++	switch (ios->power_mode) {
++	case MMC_POWER_OFF:
++	case MMC_POWER_UP:
++		// msdc_set_power_mode(host, ios->power_mode); /* --- by chhung */
++		break;
++	case MMC_POWER_ON:
++		host->power_mode = MMC_POWER_ON;
++		break;
++	default:
++		break;
++	}
++
++	/* Clock control */
++	if (host->mclk != ios->clock) {
++		if(ios->clock > 25000000) {
++			//printk("SD data latch edge<%d>\n", hw->data_edge);
++			sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, hw->cmd_edge);
++			sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, hw->data_edge);
++		} else {
++			sdr_write32(MSDC_IOCON,      0x00000000);
++			sdr_write32(MSDC_DAT_RDDLY0, 0x10101010);	// for MT7620 E2 and afterward
++			sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
++			sdr_write32(MSDC_PAD_TUNE,   0x84101010);	// for MT7620 E2 and afterward
++		}
++		msdc_set_mclk(host, ddr, ios->clock);
++	}
++}
++
++/* ops.get_ro */
++static int msdc_ops_get_ro(struct mmc_host *mmc)
++{
++    struct msdc_host *host = mmc_priv(mmc);
++    u32 base = host->base;
++    unsigned long flags;
++    int ro = 0;
++
++    if (host->hw->flags & MSDC_WP_PIN_EN) { /* set for card */
++        spin_lock_irqsave(&host->lock, flags);
++        ro = (sdr_read32(MSDC_PS) >> 31);
++        spin_unlock_irqrestore(&host->lock, flags);
++    }
++    return ro;
++}
++
++/* ops.get_cd */
++static int msdc_ops_get_cd(struct mmc_host *mmc)
++{
++    struct msdc_host *host = mmc_priv(mmc);
++    u32 base = host->base;    
++    unsigned long flags;
++    int present = 1;
++
++    /* for sdio, MSDC_REMOVABLE not set, always return 1 */
++    if (!(host->hw->flags & MSDC_REMOVABLE)) {
++        /* For sdio, read H/W always get<1>, but may timeout some times */       	    	
++#if 1
++        host->card_inserted = 1;       
++        return 1;
++#else
++        host->card_inserted = (host->pm_state.event == PM_EVENT_USER_RESUME) ? 1 : 0; 
++        printk("sdio ops_get_cd<%d>\n", host->card_inserted);
++        return host->card_inserted; 
++#endif
++    }
++
++    /* MSDC_CD_PIN_EN set for card */
++    if (host->hw->flags & MSDC_CD_PIN_EN) {
++        spin_lock_irqsave(&host->lock, flags);
++#if 0        
++        present = host->card_inserted;  /* why not read from H/W: Fix me*/
++#else
++        present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1; 
++        host->card_inserted = present;  
++#endif        
++        spin_unlock_irqrestore(&host->lock, flags);
++    } else {
++        present = 0; /* TODO? Check DAT3 pins for card detection */
++    }
++
++    //printk("ops_get_cd return<%d>\n", present);
++    return present;
++}
++
++/* ops.enable_sdio_irq */
++static void msdc_ops_enable_sdio_irq(struct mmc_host *mmc, int enable)
++{
++    struct msdc_host *host = mmc_priv(mmc);
++    struct msdc_hw *hw = host->hw;
++    u32 base = host->base;
++    u32 tmp;
++
++    if (hw->flags & MSDC_EXT_SDIO_IRQ) { /* yes for sdio */
++        if (enable) {
++            hw->enable_sdio_eirq();  /* combo_sdio_enable_eirq */
++        } else {
++            hw->disable_sdio_eirq(); /* combo_sdio_disable_eirq */
++        }
++    } else { 
++    	  //printk("XXX \n");  /* so never enter here */
++        tmp = sdr_read32(SDC_CFG);
++        /* FIXME. Need to interrupt gap detection */
++        if (enable) {
++            tmp |= (SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);           
++        } else {
++            tmp &= ~(SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
++        }
++        sdr_write32(SDC_CFG, tmp);      
++    }
++}
++
++static struct mmc_host_ops mt_msdc_ops = {
++    .request         = msdc_ops_request,
++    .set_ios         = msdc_ops_set_ios,
++    .get_ro          = msdc_ops_get_ro,
++    .get_cd          = msdc_ops_get_cd,
++    .enable_sdio_irq = msdc_ops_enable_sdio_irq,
++};
++
++/*--------------------------------------------------------------------------*/
++/* interrupt handler                                                    */
++/*--------------------------------------------------------------------------*/
++static irqreturn_t msdc_irq(int irq, void *dev_id)
++{
++    struct msdc_host  *host = (struct msdc_host *)dev_id;
++    struct mmc_data   *data = host->data;
++    struct mmc_command *cmd = host->cmd;
++    u32 base = host->base;
++        
++    u32 cmdsts = MSDC_INT_RSPCRCERR  | MSDC_INT_CMDTMO  | MSDC_INT_CMDRDY  |
++                 MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO | MSDC_INT_ACMDRDY |
++                 MSDC_INT_ACMD19_DONE;                 
++    u32 datsts = MSDC_INT_DATCRCERR  |MSDC_INT_DATTMO;
++
++    u32 intsts = sdr_read32(MSDC_INT);
++    u32 inten  = sdr_read32(MSDC_INTEN); inten &= intsts; 
++
++    sdr_write32(MSDC_INT, intsts);  /* clear interrupts */
++    /* MSG will cause fatal error */
++        
++    /* card change interrupt */
++    if (intsts & MSDC_INT_CDSC){
++        //printk("MSDC_INT_CDSC irq<0x%.8x>\n", intsts); 
++        tasklet_hi_schedule(&host->card_tasklet);
++        /* tuning when plug card ? */
++    }
++    
++    /* sdio interrupt */
++    if (intsts & MSDC_INT_SDIOIRQ){
++        //printk("XXX MSDC_INT_SDIOIRQ\n");  /* seems not sdio irq */
++        //mmc_signal_sdio_irq(host->mmc);
++    }
++
++    /* transfer complete interrupt */
++    if (data != NULL) {
++        if (inten & MSDC_INT_XFER_COMPL) {       	
++            data->bytes_xfered = host->dma.xfersz;
++            complete(&host->xfer_done);           
++        } 
++        
++        if (intsts & datsts) {         
++            /* do basic reset, or stop command will sdc_busy */
++            msdc_reset();
++            msdc_clr_fifo();        
++            msdc_clr_int();             
++            atomic_set(&host->abort, 1);  /* For PIO mode exit */
++            
++            if (intsts & MSDC_INT_DATTMO){
++               	//printk("XXX CMD<%d> MSDC_INT_DATTMO\n", host->mrq->cmd->opcode);
++               	data->error = (unsigned int)-ETIMEDOUT;
++            }
++            else if (intsts & MSDC_INT_DATCRCERR){
++                //printk("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>\n", host->mrq->cmd->opcode, sdr_read32(SDC_DCRC_STS));
++                data->error = (unsigned int)-EIO;
++            }
++                                    
++            //if(sdr_read32(MSDC_INTEN) & MSDC_INT_XFER_COMPL) {  
++            if (host->dma_xfer) {
++                complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */
++            } /* PIO mode can't do complete, because not init */
++        }
++    }
++
++    /* command interrupts */
++    if ((cmd != NULL) && (intsts & cmdsts)) {
++        if ((intsts & MSDC_INT_CMDRDY) || (intsts & MSDC_INT_ACMDRDY) || 
++            (intsts & MSDC_INT_ACMD19_DONE)) {
++            u32 *rsp = &cmd->resp[0];
++            
++            switch (host->cmd_rsp) {
++            case RESP_NONE:
++                break;
++            case RESP_R2:
++                *rsp++ = sdr_read32(SDC_RESP3); *rsp++ = sdr_read32(SDC_RESP2);
++                *rsp++ = sdr_read32(SDC_RESP1); *rsp++ = sdr_read32(SDC_RESP0);
++                break;
++            default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
++                if ((intsts & MSDC_INT_ACMDRDY) || (intsts & MSDC_INT_ACMD19_DONE)) {
++                    *rsp = sdr_read32(SDC_ACMD_RESP);
++                } else {
++                    *rsp = sdr_read32(SDC_RESP0);    
++                }
++                break;
++            }
++        } else if ((intsts & MSDC_INT_RSPCRCERR) || (intsts & MSDC_INT_ACMDCRCERR)) {
++            if(intsts & MSDC_INT_ACMDCRCERR){
++                //printk("XXX CMD<%d> MSDC_INT_ACMDCRCERR\n",cmd->opcode);
++            } 
++            else {
++                //printk("XXX CMD<%d> MSDC_INT_RSPCRCERR\n",cmd->opcode);
++            }
++            cmd->error = (unsigned int)-EIO;
++        } else if ((intsts & MSDC_INT_CMDTMO) || (intsts & MSDC_INT_ACMDTMO)) {
++            if(intsts & MSDC_INT_ACMDTMO){
++                //printk("XXX CMD<%d> MSDC_INT_ACMDTMO\n",cmd->opcode);
++            }
++            else {
++                //printk("XXX CMD<%d> MSDC_INT_CMDTMO\n",cmd->opcode);
++            }
++            cmd->error = (unsigned int)-ETIMEDOUT;
++            msdc_reset();
++            msdc_clr_fifo();        
++            msdc_clr_int();            
++        }
++        complete(&host->cmd_done);
++    }
++
++    /* mmc irq interrupts */
++    if (intsts & MSDC_INT_MMCIRQ) {
++        //printk(KERN_INFO "msdc[%d] MMCIRQ: SDC_CSTS=0x%.8x\r\n", host->id, sdr_read32(SDC_CSTS));    
++    }
++    
++#ifdef MT6575_SD_DEBUG
++    {
++        msdc_int_reg *int_reg = (msdc_int_reg*)&intsts;
++        /*printk("IRQ_EVT(0x%x): MMCIRQ(%d) CDSC(%d), ACRDY(%d), ACTMO(%d), ACCRE(%d) AC19DN(%d)\n", 
++            intsts,
++            int_reg->mmcirq,
++            int_reg->cdsc,
++            int_reg->atocmdrdy,
++            int_reg->atocmdtmo,
++            int_reg->atocmdcrc,
++            int_reg->atocmd19done);
++        printk("IRQ_EVT(0x%x): SDIO(%d) CMDRDY(%d), CMDTMO(%d), RSPCRC(%d), CSTA(%d)\n", 
++            intsts,
++            int_reg->sdioirq,
++            int_reg->cmdrdy,
++            int_reg->cmdtmo,
++            int_reg->rspcrc,
++            int_reg->csta);
++        printk("IRQ_EVT(0x%x): XFCMP(%d) DXDONE(%d), DATTMO(%d), DATCRC(%d), DMAEMP(%d)\n", 
++            intsts,
++            int_reg->xfercomp,
++            int_reg->dxferdone,
++            int_reg->dattmo,
++            int_reg->datcrc,
++            int_reg->dmaqempty);*/
++
++    }
++#endif
++    
++    return IRQ_HANDLED;
++}
++
++/*--------------------------------------------------------------------------*/
++/* platform_driver members                                                      */
++/*--------------------------------------------------------------------------*/
++/* called by msdc_drv_probe/remove */
++static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
++{
++	struct msdc_hw *hw = host->hw;
++	u32 base = host->base;
++
++	/* for sdio, not set */
++	if ((hw->flags & MSDC_CD_PIN_EN) == 0) {
++		/* Pull down card detection pin since it is not avaiable */
++		/*
++		   if (hw->config_gpio_pin) 
++		   hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
++		   */
++		sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++		sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++		sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
++		return;
++	}
++
++	//printk("CD IRQ Eanable(%d)\n", enable);
++
++	if (enable) {
++	    if (hw->enable_cd_eirq) { /* not set, never enter */
++		    hw->enable_cd_eirq();
++	    } else {
++		    /* card detection circuit relies on the core power so that the core power 
++		     * shouldn't be turned off. Here adds a reference count to keep 
++		     * the core power alive.
++		     */
++		    //msdc_vcore_on(host); //did in msdc_init_hw()
++
++		    if (hw->config_gpio_pin) /* NULL */
++			    hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_UP);
++
++		    sdr_set_field(MSDC_PS, MSDC_PS_CDDEBOUNCE, DEFAULT_DEBOUNCE);
++		    sdr_set_bits(MSDC_PS, MSDC_PS_CDEN);
++		    sdr_set_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++		    sdr_set_bits(SDC_CFG, SDC_CFG_INSWKUP);  /* not in document! Fix me */
++	    }
++    } else {
++	    if (hw->disable_cd_eirq) {
++		    hw->disable_cd_eirq();
++	    } else {
++		    if (hw->config_gpio_pin) /* NULL */
++			    hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
++
++		    sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
++		    sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++		    sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++
++		    /* Here decreases a reference count to core power since card 
++		     * detection circuit is shutdown.
++		     */
++		    //msdc_vcore_off(host);
++	    }
++    }
++}
++
++/* called by msdc_drv_probe */
++static void msdc_init_hw(struct msdc_host *host)
++{
++    u32 base = host->base;
++    struct msdc_hw *hw = host->hw;
++
++#ifdef MT6575_SD_DEBUG	
++    msdc_reg[host->id] = (struct msdc_regs *)host->base;
++#endif
++
++    /* Power on */
++#if 0 /* --- chhung */
++    msdc_vcore_on(host);
++    msdc_pin_reset(host, MSDC_PIN_PULL_UP);
++    msdc_select_clksrc(host, hw->clk_src);
++    enable_clock(PERI_MSDC0_PDN + host->id, "SD");
++    msdc_vdd_on(host);
++#endif /* end of --- */
++    /* Configure to MMC/SD mode */
++    sdr_set_field(MSDC_CFG, MSDC_CFG_MODE, MSDC_SDMMC); 
++       
++    /* Reset */
++    msdc_reset();
++    msdc_clr_fifo();
++
++    /* Disable card detection */
++    sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++
++    /* Disable and clear all interrupts */
++    sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
++    sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
++    
++#if 1
++	/* reset tuning parameter */
++    sdr_write32(MSDC_PAD_CTL0,   0x00090000);
++    sdr_write32(MSDC_PAD_CTL1,   0x000A0000);
++    sdr_write32(MSDC_PAD_CTL2,   0x000A0000);
++    // sdr_write32(MSDC_PAD_TUNE,   0x00000000);
++    sdr_write32(MSDC_PAD_TUNE,   0x84101010);		// for MT7620 E2 and afterward
++    // sdr_write32(MSDC_DAT_RDDLY0, 0x00000000);
++    sdr_write32(MSDC_DAT_RDDLY0, 0x10101010);		// for MT7620 E2 and afterward
++    sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
++    sdr_write32(MSDC_IOCON,      0x00000000);
++#if 0 // use MT7620 default value: 0x403c004f
++    sdr_write32(MSDC_PATCH_BIT0, 0x003C000F); /* bit0 modified: Rx Data Clock Source: 1 -> 2.0*/
++#endif
++
++    if (sdr_read32(MSDC_ECO_VER) >= 4) { 
++        if (host->id == 1) {	
++            sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_WRDAT_CRCS, 1); 
++            sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMD_RSP,    1);
++            
++            /* internal clock: latch read data */  
++            sdr_set_bits(MSDC_PATCH_BIT0, MSDC_PATCH_BIT_CKGEN_CK);  
++        }       	
++    }   
++#endif    
++
++    /* for safety, should clear SDC_CFG.SDIO_INT_DET_EN & set SDC_CFG.SDIO in 
++       pre-loader,uboot,kernel drivers. and SDC_CFG.SDIO_INT_DET_EN will be only
++       set when kernel driver wants to use SDIO bus interrupt */
++    /* Configure to enable SDIO mode. it's must otherwise sdio cmd5 failed */
++    sdr_set_bits(SDC_CFG, SDC_CFG_SDIO);
++
++    /* disable detect SDIO device interupt function */
++    sdr_clr_bits(SDC_CFG, SDC_CFG_SDIOIDE);
++
++    /* eneable SMT for glitch filter */
++    sdr_set_bits(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKSMT);
++    sdr_set_bits(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDSMT);
++    sdr_set_bits(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATSMT);
++
++#if 1
++    /* set clk, cmd, dat pad driving */
++    sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, hw->clk_drv);
++    sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, hw->clk_drv);
++    sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, hw->cmd_drv);
++    sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, hw->cmd_drv);
++    sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, hw->dat_drv);
++    sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, hw->dat_drv);
++#else 
++    sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, 0);
++    sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, 0);
++    sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, 0);
++    sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, 0);
++    sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, 0);
++    sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, 0);
++#endif
++
++    /* set sampling edge */
++
++    /* write crc timeout detection */
++    sdr_set_field(MSDC_PATCH_BIT0, 1 << 30, 1);
++
++    /* Configure to default data timeout */
++    sdr_set_field(SDC_CFG, SDC_CFG_DTOC, DEFAULT_DTOC);
++
++    msdc_set_buswidth(host, MMC_BUS_WIDTH_1);
++
++    //printk("init hardware done!\n");
++}
++
++/* called by msdc_drv_remove */
++static void msdc_deinit_hw(struct msdc_host *host)
++{
++    u32 base = host->base;
++
++    /* Disable and clear all interrupts */
++    sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
++    sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
++
++    /* Disable card detection */
++    msdc_enable_cd_irq(host, 0);
++    // msdc_set_power_mode(host, MMC_POWER_OFF);   /* make sure power down */ /* --- by chhung */
++}
++
++/* init gpd and bd list in msdc_drv_probe */
++static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma)
++{
++    gpd_t *gpd = dma->gpd; 
++    bd_t  *bd  = dma->bd; 	
++    bd_t  *ptr, *prev;
++    
++    /* we just support one gpd */     
++    int bdlen = MAX_BD_PER_GPD;   	
++
++    /* init the 2 gpd */
++    memset(gpd, 0, sizeof(gpd_t) * 2);
++    //gpd->next = (void *)virt_to_phys(gpd + 1); /* pointer to a null gpd, bug! kmalloc <-> virt_to_phys */  
++    //gpd->next = (dma->gpd_addr + 1);    /* bug */
++    gpd->next = (void *)((u32)dma->gpd_addr + sizeof(gpd_t));    
++
++    //gpd->intr = 0;
++    gpd->bdp  = 1;   /* hwo, cs, bd pointer */      
++    //gpd->ptr  = (void*)virt_to_phys(bd); 
++    gpd->ptr = (void *)dma->bd_addr; /* physical address */
++    
++    memset(bd, 0, sizeof(bd_t) * bdlen);
++    ptr = bd + bdlen - 1;
++    //ptr->eol  = 1;  /* 0 or 1 [Fix me]*/
++    //ptr->next = 0;    
++    
++    while (ptr != bd) {
++        prev = ptr - 1;
++        prev->next = (void *)(dma->bd_addr + sizeof(bd_t) *(ptr - bd));
++        ptr = prev;
++    }
++}
++
++static int msdc_drv_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	__iomem void *base;
++    struct mmc_host *mmc;
++    struct resource *mem;
++    struct msdc_host *host;
++    struct msdc_hw *hw;
++    int ret, irq;
++     pdev->dev.platform_data = &msdc0_hw;
++ 
++    /* Allocate MMC host for this device */
++    mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
++    if (!mmc) return -ENOMEM;
++
++    hw   = (struct msdc_hw*)pdev->dev.platform_data;
++    mem  = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++    irq  = platform_get_irq(pdev, 0);
++
++    //BUG_ON((!hw) || (!mem) || (irq < 0)); /* --- by chhung */
++    
++	base = devm_request_and_ioremap(&pdev->dev, res);
++	if (IS_ERR(base))
++		return PTR_ERR(base);
++
++/*    mem = request_mem_region(mem->start - 0xa0000000, (mem->end - mem->start + 1) - 0xa0000000, dev_name(&pdev->dev));
++    if (mem == NULL) {
++        mmc_free_host(mmc);
++        return -EBUSY;
++    }
++*/
++    /* Set host parameters to mmc */
++    mmc->ops        = &mt_msdc_ops;
++    mmc->f_min      = HOST_MIN_MCLK;
++    mmc->f_max      = HOST_MAX_MCLK;
++    mmc->ocr_avail  = MSDC_OCR_AVAIL;
++    
++    /* For sd card: MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED, 
++       For sdio   : MSDC_EXT_SDIO_IRQ | MSDC_HIGHSPEED */
++    if (hw->flags & MSDC_HIGHSPEED) {
++        mmc->caps   = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
++    }
++    if (hw->data_pins == 4) { /* current data_pins are all 4*/
++        mmc->caps  |= MMC_CAP_4_BIT_DATA;
++    } else if (hw->data_pins == 8) {
++        mmc->caps  |= MMC_CAP_8_BIT_DATA;
++    }
++    if ((hw->flags & MSDC_SDIO_IRQ) || (hw->flags & MSDC_EXT_SDIO_IRQ))
++        mmc->caps |= MMC_CAP_SDIO_IRQ;  /* yes for sdio */
++
++    /* MMC core transfer sizes tunable parameters */
++  //  mmc->max_hw_segs   = MAX_HW_SGMTS;
++//    mmc->max_phys_segs = MAX_PHY_SGMTS;
++    mmc->max_seg_size  = MAX_SGMT_SZ;
++    mmc->max_blk_size  = HOST_MAX_BLKSZ;
++    mmc->max_req_size  = MAX_REQ_SZ; 
++    mmc->max_blk_count = mmc->max_req_size;
++
++    host = mmc_priv(mmc);
++    host->hw        = hw;
++    host->mmc       = mmc;
++    host->id        = pdev->id;
++    host->error     = 0;
++    host->irq       = irq;    
++    host->base      = (unsigned long) base;
++    host->mclk      = 0;                   /* mclk: the request clock of mmc sub-system */
++    host->hclk      = hclks[hw->clk_src];  /* hclk: clock of clock source to msdc controller */
++    host->sclk      = 0;                   /* sclk: the really clock after divition */
++    host->pm_state  = PMSG_RESUME;
++    host->suspend   = 0;
++    host->core_clkon = 0;
++    host->card_clkon = 0;    
++    host->core_power = 0;
++    host->power_mode = MMC_POWER_OFF;
++//    host->card_inserted = hw->flags & MSDC_REMOVABLE ? 0 : 1;
++    host->timeout_ns = 0;
++    host->timeout_clks = DEFAULT_DTOC * 65536;
++  
++    host->mrq = NULL; 
++    //init_MUTEX(&host->sem); /* we don't need to support multiple threads access */
++   
++    host->dma.used_gpd = 0;
++    host->dma.used_bd = 0;
++
++    /* using dma_alloc_coherent*/  /* todo: using 1, for all 4 slots */
++    host->dma.gpd = dma_alloc_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), &host->dma.gpd_addr, GFP_KERNEL); 
++    host->dma.bd =  dma_alloc_coherent(NULL, MAX_BD_NUM  * sizeof(bd_t),  &host->dma.bd_addr,  GFP_KERNEL); 
++    BUG_ON((!host->dma.gpd) || (!host->dma.bd));    
++    msdc_init_gpd_bd(host, &host->dma);
++    /*for emmc*/
++    msdc_6575_host[pdev->id] = host;
++    
++    tasklet_init(&host->card_tasklet, msdc_tasklet_card, (ulong)host);
++    spin_lock_init(&host->lock);
++    msdc_init_hw(host);
++
++    ret = request_irq((unsigned int)irq, msdc_irq, IRQF_TRIGGER_LOW, dev_name(&pdev->dev), host);
++    if (ret) goto release;
++    // mt65xx_irq_unmask(irq); /* --- by chhung */
++    
++    if (hw->flags & MSDC_CD_PIN_EN) { /* not set for sdio */
++        if (hw->request_cd_eirq) { /* not set for MT6575 */
++            hw->request_cd_eirq(msdc_eirq_cd, (void*)host); /* msdc_eirq_cd will not be used! */
++        }
++    }
++
++    if (hw->request_sdio_eirq) /* set to combo_sdio_request_eirq() for WIFI */
++        hw->request_sdio_eirq(msdc_eirq_sdio, (void*)host); /* msdc_eirq_sdio() will be called when EIRQ */
++
++    if (hw->register_pm) {/* yes for sdio */
++        if(hw->flags & MSDC_SYS_SUSPEND) { /* will not set for WIFI */
++            //printk("MSDC_SYS_SUSPEND and register_pm both set\n");
++        }
++        //mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* pm not controlled by system but by client. */ /* --- by chhung */
++    }
++    
++    platform_set_drvdata(pdev, mmc);
++
++    ret = mmc_add_host(mmc);
++    if (ret) goto free_irq;
++
++    /* Config card detection pin and enable interrupts */
++    if (hw->flags & MSDC_CD_PIN_EN) {  /* set for card */
++        msdc_enable_cd_irq(host, 1);
++    } else {
++        msdc_enable_cd_irq(host, 0);
++    }  
++
++    return 0;
++
++free_irq:
++    free_irq(irq, host);
++release:
++    platform_set_drvdata(pdev, NULL);
++    msdc_deinit_hw(host);
++
++    tasklet_kill(&host->card_tasklet);
++
++/*    if (mem)
++        release_mem_region(mem->start, mem->end - mem->start + 1);
++*/
++    mmc_free_host(mmc);
++
++    return ret;
++}
++
++/* 4 device share one driver, using "drvdata" to show difference */
++static int msdc_drv_remove(struct platform_device *pdev)
++{
++    struct mmc_host *mmc;
++    struct msdc_host *host;
++    struct resource *mem;
++
++
++    mmc  = platform_get_drvdata(pdev);
++    BUG_ON(!mmc);
++    
++    host = mmc_priv(mmc);   
++    BUG_ON(!host);
++
++    //printk("removed !!!\n");
++
++    platform_set_drvdata(pdev, NULL);
++    mmc_remove_host(host->mmc);
++    msdc_deinit_hw(host);
++
++    tasklet_kill(&host->card_tasklet);
++    free_irq(host->irq, host);
++
++    dma_free_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), host->dma.gpd, host->dma.gpd_addr);
++    dma_free_coherent(NULL, MAX_BD_NUM  * sizeof(bd_t),  host->dma.bd,  host->dma.bd_addr);
++
++    mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++    if (mem)
++        release_mem_region(mem->start, mem->end - mem->start + 1);
++
++    mmc_free_host(host->mmc);
++
++    return 0;
++}
++
++static const struct of_device_id mt7620a_sdhci_match[] = {
++	{ .compatible = "ralink,mt7620a-sdhci" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
++
++/* Fix me: Power Flow */
++static struct platform_driver mt_msdc_driver = {
++    .probe   = msdc_drv_probe,
++    .remove  = msdc_drv_remove,
++    .driver  = {
++        .name  = DRV_NAME,
++        .owner = THIS_MODULE,
++        .of_match_table = mt7620a_sdhci_match,
++
++    },
++};
++
++static int __init mt_msdc_init(void)
++{
++    int ret;
++/* +++ chhung */
++    unsigned int reg;
++
++    mtk_sd_device.dev.platform_data = &msdc0_hw;
++    printk("MTK MSDC device init.\n");
++    reg = sdr_read32((__iomem void *) 0xb0000060) & ~(0x3<<18);
++    reg |= 0x1 << 18;
++    sdr_write32((__iomem void *) 0xb0000060, reg);
++/* end of +++ */
++    ret = platform_driver_register(&mt_msdc_driver);
++    if (ret) {
++        printk(KERN_ERR DRV_NAME ": Can't register driver");
++        return ret;
++    }
++    printk(KERN_INFO DRV_NAME ": MediaTek MT6575 MSDC Driver\n");
++
++    //msdc_debug_proc_init();
++    return 0;
++}
++
++static void __exit mt_msdc_exit(void)
++{
++    platform_driver_unregister(&mt_msdc_driver);
++}
++
++module_init(mt_msdc_init);
++module_exit(mt_msdc_exit);
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("MediaTek MT6575 SD/MMC Card Driver");
++MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>");
++
++EXPORT_SYMBOL(msdc_6575_host);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0077-clocksource-add-common-of_clksrc_init-function.patch b/target/linux/ramips/patches-3.8/0077-clocksource-add-common-of_clksrc_init-function.patch
new file mode 100644
index 0000000000..62f043a6d4
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0077-clocksource-add-common-of_clksrc_init-function.patch
@@ -0,0 +1,132 @@
+From 517d8e6ba345620c6704ec3db5b23c56fde06392 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 20 Jun 2013 19:16:03 +0200
+Subject: [PATCH 77/79] clocksource: add common of_clksrc_init() function
+
+It is desirable to move all clocksource drivers to drivers/clocksource,
+yet each requires its own initialization function. We'd rather not
+pollute <linux/> with a header for each function. Instead, create a
+single of_clksrc_init() function which will determine which clocksource
+driver to initialize based on device tree.
+
+Based on a similar patch for drivers/irqchip by Thomas Petazzoni.
+
+Signed-off-by: Stephen Warren <swarren@nvidia.com>
+---
+ drivers/clocksource/Kconfig       |    3 +++
+ drivers/clocksource/Makefile      |    1 +
+ drivers/clocksource/clksrc-of.c   |   35 +++++++++++++++++++++++++++++++++++
+ include/asm-generic/vmlinux.lds.h |    9 +++++++++
+ include/linux/clocksource.h       |    9 +++++++++
+ 5 files changed, 57 insertions(+)
+ create mode 100644 drivers/clocksource/clksrc-of.c
+
+diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
+index 7fdcbd3..a32b7a9 100644
+--- a/drivers/clocksource/Kconfig
++++ b/drivers/clocksource/Kconfig
+@@ -1,3 +1,6 @@
++config CLKSRC_OF
++	bool
++
+ config CLKSRC_I8253
+ 	bool
+ 
+diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
+index f93453d..a33f792 100644
+--- a/drivers/clocksource/Makefile
++++ b/drivers/clocksource/Makefile
+@@ -1,3 +1,4 @@
++obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
+ obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
+ obj-$(CONFIG_X86_CYCLONE_TIMER)	+= cyclone.o
+ obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
+diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
+new file mode 100644
+index 0000000..bdabdaa
+--- /dev/null
++++ b/drivers/clocksource/clksrc-of.c
+@@ -0,0 +1,35 @@
++/*
++ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms and conditions of the GNU General Public License,
++ * version 2, as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/init.h>
++#include <linux/of.h>
++
++extern struct of_device_id __clksrc_of_table[];
++
++static const struct of_device_id __clksrc_of_table_sentinel
++	__used __section(__clksrc_of_table_end);
++
++void __init clocksource_of_init(void)
++{
++	struct device_node *np;
++	const struct of_device_id *match;
++	void (*init_func)(void);
++
++	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
++		init_func = match->data;
++		init_func();
++	}
++}
+diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
+index d1ea7ce..1e744c5 100644
+--- a/include/asm-generic/vmlinux.lds.h
++++ b/include/asm-generic/vmlinux.lds.h
+@@ -149,6 +149,14 @@
+ #define TRACE_SYSCALLS()
+ #endif
+ 
++#ifdef CONFIG_CLKSRC_OF
++#define CLKSRC_OF_TABLES() . = ALIGN(8);				\
++			   VMLINUX_SYMBOL(__clksrc_of_table) = .;	\
++			   *(__clksrc_of_table)				\
++			   *(__clksrc_of_table_end)
++#else
++#define CLKSRC_OF_TABLES()
++#endif
+ 
+ #define KERNEL_DTB()							\
+ 	STRUCT_ALIGN();							\
+@@ -493,6 +501,7 @@
+ 	DEV_DISCARD(init.rodata)					\
+ 	CPU_DISCARD(init.rodata)					\
+ 	MEM_DISCARD(init.rodata)					\
++	CLKSRC_OF_TABLES()						\
+ 	KERNEL_DTB()
+ 
+ #define INIT_TEXT							\
+diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
+index 4dceaf8..7944f14 100644
+--- a/include/linux/clocksource.h
++++ b/include/linux/clocksource.h
+@@ -332,4 +332,13 @@ extern int clocksource_mmio_init(void __iomem *, const char *,
+ 
+ extern int clocksource_i8253_init(void);
+ 
++#ifdef CONFIG_CLKSRC_OF
++extern void clocksource_of_init(void);
++
++#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)			\
++	static const struct of_device_id __clksrc_of_table_##name	\
++		__used __section(__clksrc_of_table)			\
++		 = { .compatible = compat, .data = fn };
++#endif
++
+ #endif /* _LINUX_CLOCKSOURCE_H */
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0078-clocksource-make-clocksource_of_init-pass-a-device_n.patch b/target/linux/ramips/patches-3.8/0078-clocksource-make-clocksource_of_init-pass-a-device_n.patch
new file mode 100644
index 0000000000..218dfc389e
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0078-clocksource-make-clocksource_of_init-pass-a-device_n.patch
@@ -0,0 +1,36 @@
+From 0e00abf87d50e80b1ce5bda65a4d89adc530ba10 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 23 May 2013 16:58:12 +0200
+Subject: [PATCH 78/79] clocksource: make clocksource_of_init() pass a
+ device_node pointer
+
+If we look at the clocksources that are OF enabled we will notice, that they
+all do a of_find_matching_node() when being called. This patch changes
+clocksource_of_init() to always pass the struct device_node pointer to the
+init function.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/clocksource/clksrc-of.c |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
+index bdabdaa..3ef11fb 100644
+--- a/drivers/clocksource/clksrc-of.c
++++ b/drivers/clocksource/clksrc-of.c
+@@ -26,10 +26,10 @@ void __init clocksource_of_init(void)
+ {
+ 	struct device_node *np;
+ 	const struct of_device_id *match;
+-	void (*init_func)(void);
++	void (*init_func)(struct device_node *);
+ 
+ 	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
+ 		init_func = match->data;
+-		init_func();
++		init_func(np);
+ 	}
+ }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0079-clocksource-MIPS-ralink-add-support-for-systick-time.patch b/target/linux/ramips/patches-3.8/0079-clocksource-MIPS-ralink-add-support-for-systick-time.patch
new file mode 100644
index 0000000000..32c96ec046
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0079-clocksource-MIPS-ralink-add-support-for-systick-time.patch
@@ -0,0 +1,282 @@
+From 4f3ae2a7ee1b1c9b9cab287c828f2ed7b1858495 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 20 Jun 2013 19:21:52 +0200
+Subject: [PATCH 79/79] clocksource: MIPS: ralink: add support for systick
+ timer found on newer ralink SoC
+
+Signed-off-by: John Crispin <blogic@openwrt.org
+---
+ arch/mips/pci/Makefile.rej        |   10 +++
+ arch/mips/ralink/Kconfig          |    2 +
+ arch/mips/ralink/Kconfig.rej      |   10 +++
+ arch/mips/ralink/clk.c            |    1 +
+ drivers/clocksource/Kconfig       |    6 ++
+ drivers/clocksource/Makefile      |    1 +
+ drivers/clocksource/cevt-rt3352.c |  162 +++++++++++++++++++++++++++++++++++++
+ 7 files changed, 192 insertions(+)
+ create mode 100644 arch/mips/pci/Makefile.rej
+ create mode 100644 arch/mips/ralink/Kconfig.rej
+ create mode 100644 drivers/clocksource/cevt-rt3352.c
+
+diff --git a/arch/mips/pci/Makefile.rej b/arch/mips/pci/Makefile.rej
+new file mode 100644
+index 0000000..c5761e8
+--- /dev/null
++++ b/arch/mips/pci/Makefile.rej
+@@ -0,0 +1,10 @@
++--- arch/mips/pci/Makefile
+++++ arch/mips/pci/Makefile
++@@ -43,6 +43,7 @@
++ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
++ obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
++ obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
+++obj-$(CONFIG_SOC_MT7620)	+= pci-mt7620a.o
++ obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
++ obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
++ obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index f89fdf8..c8d5b6c 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -15,6 +15,7 @@ choice
+ 		select USB_ARCH_HAS_HCD
+ 		select USB_ARCH_HAS_OHCI
+ 		select USB_ARCH_HAS_EHCI
++		select CLKEVT_RT3352
+ 
+ 	config SOC_RT3883
+ 		bool "RT3883"
+@@ -24,6 +25,7 @@ choice
+ 
+ 	config SOC_MT7620
+ 		bool "MT7620"
++		select CLKEVT_RT3352
+ 		select HW_HAS_PCI
+ 
+ endchoice
+diff --git a/arch/mips/ralink/Kconfig.rej b/arch/mips/ralink/Kconfig.rej
+new file mode 100644
+index 0000000..d3a804f
+--- /dev/null
++++ b/arch/mips/ralink/Kconfig.rej
+@@ -0,0 +1,10 @@
++--- arch/mips/ralink/Kconfig
+++++ arch/mips/ralink/Kconfig
++@@ -23,6 +24,7 @@
++ 
++ 	config SOC_MT7620
++ 		bool "MT7620"
+++		select CLKEVT_RT3352
++ 
++ endchoice
++ 
+diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
+index 8dfa22f..bba0cdf 100644
+--- a/arch/mips/ralink/clk.c
++++ b/arch/mips/ralink/clk.c
+@@ -69,4 +69,5 @@ void __init plat_time_init(void)
+ 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
+ 	mips_hpt_frequency = clk_get_rate(clk) / 2;
+ 	clk_put(clk);
++	clocksource_of_init();
+ }
+diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
+index a32b7a9..90bed1a 100644
+--- a/drivers/clocksource/Kconfig
++++ b/drivers/clocksource/Kconfig
+@@ -7,6 +7,12 @@ config CLKSRC_I8253
+ config CLKEVT_I8253
+ 	bool
+ 
++config CLKEVT_RT3352
++	bool
++	depends on MIPS && RALINK
++	select CLKSRC_OF
++	select CLKSRC_MMIO
++
+ config I8253_LOCK
+ 	bool
+ 
+diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
+index a33f792..5031f82 100644
+--- a/drivers/clocksource/Makefile
++++ b/drivers/clocksource/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_SH_TIMER_TMU)	+= sh_tmu.o
+ obj-$(CONFIG_EM_TIMER_STI)	+= em_sti.o
+ obj-$(CONFIG_CLKBLD_I8253)	+= i8253.o
+ obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
++obj-$(CONFIG_CLKEVT_RT3352)	+= cevt-rt3352.o
+ obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
+ obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
+ obj-$(CONFIG_CLKSRC_NOMADIK_MTU)	+= nomadik-mtu.o
+diff --git a/drivers/clocksource/cevt-rt3352.c b/drivers/clocksource/cevt-rt3352.c
+new file mode 100644
+index 0000000..bd50edd
+--- /dev/null
++++ b/drivers/clocksource/cevt-rt3352.c
+@@ -0,0 +1,162 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2013 by John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/clockchips.h>
++#include <linux/clocksource.h>
++#include <linux/interrupt.h>
++#include <linux/reset.h>
++#include <linux/init.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_address.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++#include <asm/time.h>
++
++#define SYSTICK_FREQ	(50 * 1000)
++
++#define SYSTICK_CONFIG	0x00
++#define SYSTICK_COMPARE	0x04
++#define SYSTICK_COUNT	0x08
++
++/* route systick irq to mips irq 7 instead of the r4k-timer */
++#define CFG_EXT_STK_EN	0x2
++/* enable the counter */
++#define CFG_CNT_EN	0x1
++
++struct systick_device {
++	void __iomem *membase;
++	struct clock_event_device dev;
++	int irq_requested;
++	int freq_scale;
++};
++
++static void systick_set_clock_mode(enum clock_event_mode mode,
++				struct clock_event_device *evt);
++
++static int systick_next_event(unsigned long delta,
++				struct clock_event_device *evt)
++{
++	struct systick_device *sdev = container_of(evt, struct systick_device, dev);
++	u32 count;
++
++	count = ioread32(sdev->membase + SYSTICK_COUNT);
++	count = (count + delta) % SYSTICK_FREQ;
++	iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
++
++	return 0;
++}
++
++static void systick_event_handler(struct clock_event_device *dev)
++{
++	/* noting to do here */
++}
++
++static irqreturn_t systick_interrupt(int irq, void *dev_id)
++{
++	struct clock_event_device *dev = (struct clock_event_device *) dev_id;
++
++	dev->event_handler(dev);
++
++	return IRQ_HANDLED;
++}
++
++static struct systick_device systick = {
++	.dev = {
++		/* cevt-r4k uses 300, make sure systick gets used if available */
++		.rating		= 310,
++		.features	= CLOCK_EVT_FEAT_ONESHOT,
++		.set_next_event	= systick_next_event,
++		.set_mode	= systick_set_clock_mode,
++		.event_handler	= systick_event_handler,
++	},
++};
++
++static struct irqaction systick_irqaction = {
++	.handler = systick_interrupt,
++	.flags = IRQF_PERCPU | IRQF_TIMER,
++	.dev_id = &systick.dev,
++};
++
++/* ugly hack */
++#ifdef CONFIG_SOC_MT7620
++
++#define CLK_LUT_CFG	0x40
++#define SLEEP_EN	BIT(31)
++
++static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
++{
++	if (sdev->freq_scale == status)
++		return;
++
++	sdev->freq_scale = status;
++
++	pr_info("%s: %s autosleep mode\n", systick.dev.name, (status) ? ("enable") : ("disable"));
++	if (status)
++		rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
++	else
++		rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
++}
++#else
++static inline void mt7620_freq_scaling(struct systick_device *sdev, int status) {}
++#endif
++
++static void systick_set_clock_mode(enum clock_event_mode mode,
++				struct clock_event_device *evt)
++{
++	struct systick_device *sdev = container_of(evt, struct systick_device, dev);
++
++	switch (mode) {
++	case CLOCK_EVT_MODE_ONESHOT:
++		if (!sdev->irq_requested)
++			setup_irq(systick.dev.irq, &systick_irqaction);
++		mt7620_freq_scaling(sdev, 1);
++		sdev->irq_requested = 1;
++		iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
++		break;
++
++	case CLOCK_EVT_MODE_SHUTDOWN:
++		if (sdev->irq_requested)
++			free_irq(systick.dev.irq, &systick_irqaction);
++		mt7620_freq_scaling(sdev, 0);
++		sdev->irq_requested = 0;
++		iowrite32(0, systick.membase + SYSTICK_CONFIG);
++		break;
++
++	default:
++		pr_err("%s: Unhandeled mips clock_mode\n", systick.dev.name);
++		break;
++	}
++}
++
++static void __init ralink_systick_init(struct device_node *np)
++{
++	systick.membase = of_iomap(np, 0);
++	if (!systick.membase) {
++		pr_err("%s: of_iomap failed", np->name);
++		return;
++	}
++
++	clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
++			SYSTICK_FREQ, 301, 16, clocksource_mmio_readl_up);
++
++	systick_irqaction.name = np->name;
++	systick.dev.name = np->name;
++	clockevent_set_clock(&systick.dev, SYSTICK_FREQ);
++	systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
++	systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
++	systick.dev.irq = irq_of_parse_and_map(np, 0);
++	if (!systick.dev.irq)
++		panic("%s: request_irq failed", np->name);
++
++	clockevents_register_device(&systick.dev);
++
++	pr_info("%s: runing - mult: %d, shift: %d\n", np->name, systick.dev.mult, systick.dev.shift);
++}
++
++CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0080-MIPS-add-ohci-ehci-support.patch b/target/linux/ramips/patches-3.8/0080-MIPS-add-ohci-ehci-support.patch
new file mode 100644
index 0000000000..0726ac8df6
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0080-MIPS-add-ohci-ehci-support.patch
@@ -0,0 +1,227 @@
+From ec6f3aa022ef6e61f6ca80c6e30610d879654466 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 20 Jun 2013 23:33:05 +0200
+Subject: [PATCH] MIPS: add ohci/ehci support
+
+Signed-off-by: John Crsipin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig         |    2 ++
+ drivers/usb/Makefile             |    3 ++-
+ drivers/usb/host/ehci-platform.c |   43 ++++++++++++++++++++++++++++++++------
+ drivers/usb/host/ohci-platform.c |   37 +++++++++++++++++++++++++++-----
+ 4 files changed, 73 insertions(+), 12 deletions(-)
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index c8d5b6c..7cd1188 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -27,6 +27,8 @@ choice
+ 		bool "MT7620"
+ 		select CLKEVT_RT3352
+ 		select HW_HAS_PCI
++		select USB_ARCH_HAS_OHCI
++		select USB_ARCH_HAS_EHCI
+ 
+ endchoice
+ 
+diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
+index f5ed3d7..41a4741 100644
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -12,6 +12,8 @@ obj-$(CONFIG_USB_DWC3)		+= dwc3/
+ 
+ obj-$(CONFIG_USB_MON)		+= mon/
+ 
++obj-$(CONFIG_USB_COMMON)	+= phy/
++
+ obj-$(CONFIG_PCI)		+= host/
+ obj-$(CONFIG_USB_EHCI_HCD)	+= host/
+ obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
+@@ -46,7 +48,6 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
+ obj-$(CONFIG_USB_SERIAL)	+= serial/
+ 
+ obj-$(CONFIG_USB)		+= misc/
+-obj-$(CONFIG_USB_COMMON)	+= phy/
+ obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
+ 
+ obj-$(CONFIG_USB_ATM)		+= atm/
+diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
+index 58fa0c9..0050df7 100644
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -23,6 +23,10 @@
+ #include <linux/io.h>
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/of.h>
++#include <linux/usb/otg.h>
++#include <linux/usb/phy.h>
+ #include <linux/usb.h>
+ #include <linux/usb/hcd.h>
+ #include <linux/usb/ehci_pdriver.h>
+@@ -61,22 +65,40 @@ static const struct ehci_driver_overrides platform_overrides __initdata = {
+ 	.reset =	ehci_platform_reset,
+ };
+ 
++static struct usb_ehci_pdata ehci_platform_defaults;
++
+ static int ehci_platform_probe(struct platform_device *dev)
+ {
+ 	struct usb_hcd *hcd;
+ 	struct resource *res_mem;
+-	struct usb_ehci_pdata *pdata = dev->dev.platform_data;
++	struct usb_ehci_pdata *pdata;
+ 	int irq;
+ 	int err = -ENOMEM;
+ 
+-	if (!pdata) {
+-		WARN_ON(1);
+-		return -ENODEV;
+-	}
+-
+ 	if (usb_disabled())
+ 		return -ENODEV;
+ 
++	/*
++	 * use reasonable defaults so platforms don't have to provide these.
++	 * with DT probing on ARM, none of these are set.
++	 */
++	if (!dev->dev.platform_data)
++		dev->dev.platform_data = &ehci_platform_defaults;
++	if (!dev->dev.dma_mask)
++		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
++	if (!dev->dev.coherent_dma_mask)
++		dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
++
++	pdata = dev->dev.platform_data;
++
++#ifdef CONFIG_USB_COMMON
++	hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
++	if (!IS_ERR_OR_NULL(hcd->phy)) {
++		otg_set_host(hcd->phy->otg,
++				&hcd->self);
++		usb_phy_init(hcd->phy);
++	}
++#endif
+ 	irq = platform_get_irq(dev, 0);
+ 	if (irq < 0) {
+ 		dev_err(&dev->dev, "no irq provided");
+@@ -138,6 +160,9 @@ static int ehci_platform_remove(struct platform_device *dev)
+ 	if (pdata->power_off)
+ 		pdata->power_off(dev);
+ 
++	if (pdata == &ehci_platform_defaults)
++		dev->dev.platform_data = NULL;
++
+ 	return 0;
+ }
+ 
+@@ -182,6 +207,11 @@ static int ehci_platform_resume(struct device *dev)
+ #define ehci_platform_resume	NULL
+ #endif /* CONFIG_PM */
+ 
++static const struct of_device_id ralink_ehci_ids[] = {
++	{ .compatible = "ralink,rt3xxx-ehci", },
++	{}
++};
++
+ static const struct platform_device_id ehci_platform_table[] = {
+ 	{ "ehci-platform", 0 },
+ 	{ }
+@@ -202,6 +232,7 @@ static struct platform_driver ehci_platform_driver = {
+ 		.owner	= THIS_MODULE,
+ 		.name	= "ehci-platform",
+ 		.pm	= &ehci_platform_pm_ops,
++		.of_match_table = of_match_ptr(ralink_ehci_ids),
+ 	}
+ };
+ 
+diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
+index 084503b..3a60f96 100644
+--- a/drivers/usb/host/ohci-platform.c
++++ b/drivers/usb/host/ohci-platform.c
+@@ -15,6 +15,10 @@
+  */
+ #include <linux/platform_device.h>
+ #include <linux/usb/ohci_pdriver.h>
++#include <linux/dma-mapping.h>
++#include <linux/of.h>
++
++static struct usb_ohci_pdata ohci_platform_defaults;
+ 
+ static int ohci_platform_reset(struct usb_hcd *hcd)
+ {
+@@ -87,14 +91,22 @@ static int ohci_platform_probe(struct platform_device *dev)
+ {
+ 	struct usb_hcd *hcd;
+ 	struct resource *res_mem;
+-	struct usb_ohci_pdata *pdata = dev->dev.platform_data;
++	struct usb_ohci_pdata *pdata;
+ 	int irq;
+ 	int err = -ENOMEM;
+ 
+-	if (!pdata) {
+-		WARN_ON(1);
+-		return -ENODEV;
+-	}
++	/*
++	 * use reasonable defaults so platforms don't have to provide these.
++	 * with DT probing on ARM, none of these are set.
++	 */
++	if (!dev->dev.platform_data)
++		dev->dev.platform_data = &ohci_platform_defaults;
++	if (!dev->dev.dma_mask)
++		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
++	if (!dev->dev.coherent_dma_mask)
++		dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
++
++	pdata = dev->dev.platform_data;
+ 
+ 	if (usb_disabled())
+ 		return -ENODEV;
+@@ -124,6 +136,12 @@ static int ohci_platform_probe(struct platform_device *dev)
+ 		goto err_power;
+ 	}
+ 
++#ifdef CONFIG_USB_COMMON
++	hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
++	if (!IS_ERR_OR_NULL(hcd->phy))
++		usb_phy_init(hcd->phy);
++#endif
++
+ 	hcd->rsrc_start = res_mem->start;
+ 	hcd->rsrc_len = resource_size(res_mem);
+ 
+@@ -161,6 +179,9 @@ static int ohci_platform_remove(struct platform_device *dev)
+ 	if (pdata->power_off)
+ 		pdata->power_off(dev);
+ 
++	if (pdata == &ohci_platform_defaults)
++		dev->dev.platform_data = NULL;
++
+ 	return 0;
+ }
+ 
+@@ -200,6 +221,11 @@ static int ohci_platform_resume(struct device *dev)
+ #define ohci_platform_resume	NULL
+ #endif /* CONFIG_PM */
+ 
++static const struct of_device_id ralink_ohci_ids[] = {
++	{ .compatible = "ralink,rt3xxx-ohci", },
++	{}
++};
++
+ static const struct platform_device_id ohci_platform_table[] = {
+ 	{ "ohci-platform", 0 },
+ 	{ }
+@@ -220,5 +246,6 @@ static struct platform_driver ohci_platform_driver = {
+ 		.owner	= THIS_MODULE,
+ 		.name	= "ohci-platform",
+ 		.pm	= &ohci_platform_pm_ops,
++		.of_match_table = of_match_ptr(ralink_ohci_ids),
+ 	}
+ };
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0136-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-3.8/0136-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
deleted file mode 100644
index 9bb9b5fb2a..0000000000
--- a/target/linux/ramips/patches-3.8/0136-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
+++ /dev/null
@@ -1,3137 +0,0 @@
-From 34fc7d26c01ba594be347aefcc31f55b36c06a72 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Apr 2013 23:20:03 +0200
-Subject: [PATCH 136/137] NET: MIPS: add ralink SoC ethernet driver
-
-Add support for Ralink FE and ESW.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../include/asm/mach-ralink/rt305x_esw_platform.h  |   27 +
- arch/mips/ralink/rt305x.c                          |    1 +
- drivers/net/ethernet/Kconfig                       |    1 +
- drivers/net/ethernet/Makefile                      |    1 +
- drivers/net/ethernet/ramips/Kconfig                |   18 +
- drivers/net/ethernet/ramips/Makefile               |    9 +
- drivers/net/ethernet/ramips/ramips_debugfs.c       |  127 ++
- drivers/net/ethernet/ramips/ramips_esw.c           | 1221 +++++++++++++++++++
- drivers/net/ethernet/ramips/ramips_eth.h           |  375 ++++++
- drivers/net/ethernet/ramips/ramips_main.c          | 1281 ++++++++++++++++++++
- 10 files changed, 3061 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
- create mode 100644 drivers/net/ethernet/ramips/Kconfig
- create mode 100644 drivers/net/ethernet/ramips/Makefile
- create mode 100644 drivers/net/ethernet/ramips/ramips_debugfs.c
- create mode 100644 drivers/net/ethernet/ramips/ramips_esw.c
- create mode 100644 drivers/net/ethernet/ramips/ramips_eth.h
- create mode 100644 drivers/net/ethernet/ramips/ramips_main.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
-@@ -0,0 +1,27 @@
-+/*
-+ *  Ralink RT305x SoC platform device registration
-+ *
-+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#ifndef _RT305X_ESW_PLATFORM_H
-+#define _RT305X_ESW_PLATFORM_H
-+
-+enum {
-+	RT305X_ESW_VLAN_CONFIG_NONE = 0,
-+	RT305X_ESW_VLAN_CONFIG_LLLLW,
-+	RT305X_ESW_VLAN_CONFIG_WLLLL,
-+};
-+
-+struct rt305x_esw_platform_data
-+{
-+	u8 vlan_config;
-+	u32 reg_initval_fct2;
-+	u32 reg_initval_fpa2;
-+};
-+
-+#endif /* _RT305X_ESW_PLATFORM_H */
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -221,6 +221,7 @@ void __init ralink_clk_init(void)
- 	}
- 
- 	ralink_clk_add("cpu", cpu_rate);
-+	ralink_clk_add("sys", sys_rate);
- 	ralink_clk_add("10000b00.spi", sys_rate);
- 	ralink_clk_add("10000100.timer", wdt_rate);
- 	ralink_clk_add("10000120.watchdog", wdt_rate);
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin
- source "drivers/net/ethernet/pasemi/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
- source "drivers/net/ethernet/racal/Kconfig"
-+source "drivers/net/ethernet/ramips/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
- obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
-+obj-$(CONFIG_NET_RAMIPS) += ramips/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_SH_ETH) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
---- /dev/null
-+++ b/drivers/net/ethernet/ramips/Kconfig
-@@ -0,0 +1,18 @@
-+config NET_RAMIPS
-+       tristate "Ralink RT288X/RT3X5X/RT3662/RT3883 ethernet driver"
-+       depends on RALINK
-+       select PHYLIB if (SOC_RT288X || SOC_RT3883)
-+       select SWCONFIG if SOC_RT305X
-+       help
-+         This driver supports the etehrnet mac inside the ralink wisocs
-+
-+if NET_RAMIPS
-+
-+config NET_RAMIPS_DEBUG
-+       bool "Enable debug messages in the Ralink ethernet driver"
-+
-+config NET_RAMIPS_DEBUG_FS
-+	bool "Enable debugfs support for the Ralink ethernet driver"
-+	depends on DEBUG_FS
-+
-+endif
---- /dev/null
-+++ b/drivers/net/ethernet/ramips/Makefile
-@@ -0,0 +1,9 @@
-+#
-+# Makefile for the Ramips SoCs built-in ethernet macs
-+#
-+
-+ramips-y	+= ramips_main.o
-+
-+ramips-$(CONFIG_NET_RAMIPS_DEBUG_FS)	+= ramips_debugfs.o
-+
-+obj-$(CONFIG_NET_RAMIPS)	+= ramips.o
---- /dev/null
-+++ b/drivers/net/ethernet/ramips/ramips_debugfs.c
-@@ -0,0 +1,127 @@
-+/*
-+ *  Ralink SoC ethernet driver debugfs code
-+ *
-+ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/debugfs.h>
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+
-+#include "ramips_eth.h"
-+
-+static struct dentry *raeth_debugfs_root;
-+
-+static int raeth_debugfs_generic_open(struct inode *inode, struct file *file)
-+{
-+	file->private_data = inode->i_private;
-+	return 0;
-+}
-+
-+void raeth_debugfs_update_int_stats(struct raeth_priv *re, u32 status)
-+{
-+	re->debug.int_stats.total += !!status;
-+
-+	re->debug.int_stats.rx_delayed += !!(status & RAMIPS_RX_DLY_INT);
-+	re->debug.int_stats.rx_done0 += !!(status & RAMIPS_RX_DONE_INT0);
-+	re->debug.int_stats.rx_coherent += !!(status & RAMIPS_RX_COHERENT);
-+
-+	re->debug.int_stats.tx_delayed += !!(status & RAMIPS_TX_DLY_INT);
-+	re->debug.int_stats.tx_done0 += !!(status & RAMIPS_TX_DONE_INT0);
-+	re->debug.int_stats.tx_done1 += !!(status & RAMIPS_TX_DONE_INT1);
-+	re->debug.int_stats.tx_done2 += !!(status & RAMIPS_TX_DONE_INT2);
-+	re->debug.int_stats.tx_done3 += !!(status & RAMIPS_TX_DONE_INT3);
-+	re->debug.int_stats.tx_coherent += !!(status & RAMIPS_TX_COHERENT);
-+
-+	re->debug.int_stats.pse_fq_empty += !!(status & RAMIPS_PSE_FQ_EMPTY);
-+	re->debug.int_stats.pse_p0_fc += !!(status & RAMIPS_PSE_P0_FC);
-+	re->debug.int_stats.pse_p1_fc += !!(status & RAMIPS_PSE_P1_FC);
-+	re->debug.int_stats.pse_p2_fc += !!(status & RAMIPS_PSE_P2_FC);
-+	re->debug.int_stats.pse_buf_drop += !!(status & RAMIPS_PSE_BUF_DROP);
-+}
-+
-+static ssize_t read_file_int_stats(struct file *file, char __user *user_buf,
-+				   size_t count, loff_t *ppos)
-+{
-+#define PR_INT_STAT(_label, _field)					\
-+	len += snprintf(buf + len, sizeof(buf) - len,			\
-+		"%-18s: %10lu\n", _label, re->debug.int_stats._field);
-+
-+	struct raeth_priv *re = file->private_data;
-+	char buf[512];
-+	unsigned int len = 0;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&re->page_lock, flags);
-+
-+	PR_INT_STAT("RX Delayed", rx_delayed);
-+	PR_INT_STAT("RX Done 0", rx_done0);
-+	PR_INT_STAT("RX Coherent", rx_coherent);
-+
-+	PR_INT_STAT("TX Delayed", tx_delayed);
-+	PR_INT_STAT("TX Done 0", tx_done0);
-+	PR_INT_STAT("TX Done 1", tx_done1);
-+	PR_INT_STAT("TX Done 2", tx_done2);
-+	PR_INT_STAT("TX Done 3", tx_done3);
-+	PR_INT_STAT("TX Coherent", tx_coherent);
-+
-+	PR_INT_STAT("PSE FQ empty", pse_fq_empty);
-+	PR_INT_STAT("CDMA Flow control", pse_p0_fc);
-+	PR_INT_STAT("GDMA1 Flow control", pse_p1_fc);
-+	PR_INT_STAT("GDMA2 Flow control", pse_p2_fc);
-+	PR_INT_STAT("PSE discard", pse_buf_drop);
-+
-+	len += snprintf(buf + len, sizeof(buf) - len, "\n");
-+	PR_INT_STAT("Total", total);
-+
-+	spin_unlock_irqrestore(&re->page_lock, flags);
-+
-+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-+#undef PR_INT_STAT
-+}
-+
-+static const struct file_operations raeth_fops_int_stats = {
-+	.open	= raeth_debugfs_generic_open,
-+	.read	= read_file_int_stats,
-+	.owner	= THIS_MODULE
-+};
-+
-+void raeth_debugfs_exit(struct raeth_priv *re)
-+{
-+	debugfs_remove_recursive(re->debug.debugfs_dir);
-+}
-+
-+int raeth_debugfs_init(struct raeth_priv *re)
-+{
-+	re->debug.debugfs_dir = debugfs_create_dir(re->netdev->name,
-+						   raeth_debugfs_root);
-+	if (!re->debug.debugfs_dir)
-+		return -ENOMEM;
-+
-+	debugfs_create_file("int_stats", S_IRUGO, re->debug.debugfs_dir,
-+			    re, &raeth_fops_int_stats);
-+
-+	return 0;
-+}
-+
-+int raeth_debugfs_root_init(void)
-+{
-+	if (raeth_debugfs_root)
-+		return -EBUSY;
-+
-+	raeth_debugfs_root = debugfs_create_dir("raeth", NULL);
-+	if (!raeth_debugfs_root)
-+		return -ENOENT;
-+
-+	return 0;
-+}
-+
-+void raeth_debugfs_root_exit(void)
-+{
-+	debugfs_remove(raeth_debugfs_root);
-+	raeth_debugfs_root = NULL;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/ramips/ramips_esw.c
-@@ -0,0 +1,1221 @@
-+#include <linux/ioport.h>
-+#include <linux/switch.h>
-+#include <linux/mii.h>
-+
-+#include <ralink_regs.h>
-+#include <rt305x.h>
-+#include <rt305x_esw_platform.h>
-+
-+/*
-+ * HW limitations for this switch:
-+ * - No large frame support (PKT_MAX_LEN at most 1536)
-+ * - Can't have untagged vlan and tagged vlan on one port at the same time,
-+ *   though this might be possible using the undocumented PPE.
-+ */
-+
-+#define RT305X_ESW_REG_ISR		0x00
-+#define RT305X_ESW_REG_IMR		0x04
-+#define RT305X_ESW_REG_FCT0		0x08
-+#define RT305X_ESW_REG_PFC1		0x14
-+#define RT305X_ESW_REG_ATS		0x24
-+#define RT305X_ESW_REG_ATS0		0x28
-+#define RT305X_ESW_REG_ATS1		0x2c
-+#define RT305X_ESW_REG_ATS2		0x30
-+#define RT305X_ESW_REG_PVIDC(_n)	(0x40 + 4 * (_n))
-+#define RT305X_ESW_REG_VLANI(_n)	(0x50 + 4 * (_n))
-+#define RT305X_ESW_REG_VMSC(_n)		(0x70 + 4 * (_n))
-+#define RT305X_ESW_REG_POA		0x80
-+#define RT305X_ESW_REG_FPA		0x84
-+#define RT305X_ESW_REG_SOCPC		0x8c
-+#define RT305X_ESW_REG_POC0		0x90
-+#define RT305X_ESW_REG_POC1		0x94
-+#define RT305X_ESW_REG_POC2		0x98
-+#define RT305X_ESW_REG_SGC		0x9c
-+#define RT305X_ESW_REG_STRT		0xa0
-+#define RT305X_ESW_REG_PCR0		0xc0
-+#define RT305X_ESW_REG_PCR1		0xc4
-+#define RT305X_ESW_REG_FPA2		0xc8
-+#define RT305X_ESW_REG_FCT2		0xcc
-+#define RT305X_ESW_REG_SGC2		0xe4
-+#define RT305X_ESW_REG_P0LED		0xa4
-+#define RT305X_ESW_REG_P1LED		0xa8
-+#define RT305X_ESW_REG_P2LED		0xac
-+#define RT305X_ESW_REG_P3LED		0xb0
-+#define RT305X_ESW_REG_P4LED		0xb4
-+#define RT305X_ESW_REG_P0PC		0xe8
-+#define RT305X_ESW_REG_P1PC		0xec
-+#define RT305X_ESW_REG_P2PC		0xf0
-+#define RT305X_ESW_REG_P3PC		0xf4
-+#define RT305X_ESW_REG_P4PC		0xf8
-+#define RT305X_ESW_REG_P5PC		0xfc
-+
-+#define RT305X_ESW_LED_LINK		0
-+#define RT305X_ESW_LED_100M		1
-+#define RT305X_ESW_LED_DUPLEX		2
-+#define RT305X_ESW_LED_ACTIVITY		3
-+#define RT305X_ESW_LED_COLLISION	4
-+#define RT305X_ESW_LED_LINKACT		5
-+#define RT305X_ESW_LED_DUPLCOLL		6
-+#define RT305X_ESW_LED_10MACT		7
-+#define RT305X_ESW_LED_100MACT		8
-+/* Additional led states not in datasheet: */
-+#define RT305X_ESW_LED_BLINK		10
-+#define RT305X_ESW_LED_ON		12
-+
-+#define RT305X_ESW_LINK_S		25
-+#define RT305X_ESW_DUPLEX_S		9
-+#define RT305X_ESW_SPD_S		0
-+
-+#define RT305X_ESW_PCR0_WT_NWAY_DATA_S	16
-+#define RT305X_ESW_PCR0_WT_PHY_CMD	BIT(13)
-+#define RT305X_ESW_PCR0_CPU_PHY_REG_S	8
-+
-+#define RT305X_ESW_PCR1_WT_DONE		BIT(0)
-+
-+#define RT305X_ESW_ATS_TIMEOUT		(5 * HZ)
-+#define RT305X_ESW_PHY_TIMEOUT		(5 * HZ)
-+
-+#define RT305X_ESW_PVIDC_PVID_M		0xfff
-+#define RT305X_ESW_PVIDC_PVID_S		12
-+
-+#define RT305X_ESW_VLANI_VID_M		0xfff
-+#define RT305X_ESW_VLANI_VID_S		12
-+
-+#define RT305X_ESW_VMSC_MSC_M		0xff
-+#define RT305X_ESW_VMSC_MSC_S		8
-+
-+#define RT305X_ESW_SOCPC_DISUN2CPU_S	0
-+#define RT305X_ESW_SOCPC_DISMC2CPU_S	8
-+#define RT305X_ESW_SOCPC_DISBC2CPU_S	16
-+#define RT305X_ESW_SOCPC_CRC_PADDING	BIT(25)
-+
-+#define RT305X_ESW_POC0_EN_BP_S		0
-+#define RT305X_ESW_POC0_EN_FC_S		8
-+#define RT305X_ESW_POC0_DIS_RMC2CPU_S	16
-+#define RT305X_ESW_POC0_DIS_PORT_M	0x7f
-+#define RT305X_ESW_POC0_DIS_PORT_S	23
-+
-+#define RT305X_ESW_POC2_UNTAG_EN_M	0xff
-+#define RT305X_ESW_POC2_UNTAG_EN_S	0
-+#define RT305X_ESW_POC2_ENAGING_S	8
-+#define RT305X_ESW_POC2_DIS_UC_PAUSE_S	16
-+
-+#define RT305X_ESW_SGC2_DOUBLE_TAG_M	0x7f
-+#define RT305X_ESW_SGC2_DOUBLE_TAG_S	0
-+#define RT305X_ESW_SGC2_LAN_PMAP_M	0x3f
-+#define RT305X_ESW_SGC2_LAN_PMAP_S	24
-+
-+#define RT305X_ESW_PFC1_EN_VLAN_M	0xff
-+#define RT305X_ESW_PFC1_EN_VLAN_S	16
-+#define RT305X_ESW_PFC1_EN_TOS_S	24
-+
-+#define RT305X_ESW_VLAN_NONE		0xfff
-+
-+#define RT305X_ESW_POA_LINK_MASK	0x1f
-+#define RT305X_ESW_POA_LINK_SHIFT	25
-+
-+#define RT305X_ESW_PORT_ST_CHG		BIT(26)
-+#define RT305X_ESW_PORT0		0
-+#define RT305X_ESW_PORT1		1
-+#define RT305X_ESW_PORT2		2
-+#define RT305X_ESW_PORT3		3
-+#define RT305X_ESW_PORT4		4
-+#define RT305X_ESW_PORT5		5
-+#define RT305X_ESW_PORT6		6
-+
-+#define RT305X_ESW_PORTS_NONE		0
-+
-+#define RT305X_ESW_PMAP_LLLLLL		0x3f
-+#define RT305X_ESW_PMAP_LLLLWL		0x2f
-+#define RT305X_ESW_PMAP_WLLLLL		0x3e
-+
-+#define RT305X_ESW_PORTS_INTERNAL					\
-+		(BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) |	\
-+		 BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) |	\
-+		 BIT(RT305X_ESW_PORT4))
-+
-+#define RT305X_ESW_PORTS_NOCPU						\
-+		(RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
-+
-+#define RT305X_ESW_PORTS_CPU	BIT(RT305X_ESW_PORT6)
-+
-+#define RT305X_ESW_PORTS_ALL						\
-+		(RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
-+
-+#define RT305X_ESW_NUM_VLANS		16
-+#define RT305X_ESW_NUM_VIDS		4096
-+#define RT305X_ESW_NUM_PORTS		7
-+#define RT305X_ESW_NUM_LANWAN		6
-+#define RT305X_ESW_NUM_LEDS		5
-+
-+enum {
-+	/* Global attributes. */
-+	RT305X_ESW_ATTR_ENABLE_VLAN,
-+	RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
-+	/* Port attributes. */
-+	RT305X_ESW_ATTR_PORT_DISABLE,
-+	RT305X_ESW_ATTR_PORT_DOUBLETAG,
-+	RT305X_ESW_ATTR_PORT_UNTAG,
-+	RT305X_ESW_ATTR_PORT_LED,
-+	RT305X_ESW_ATTR_PORT_LAN,
-+	RT305X_ESW_ATTR_PORT_RECV_BAD,
-+	RT305X_ESW_ATTR_PORT_RECV_GOOD,
-+};
-+
-+struct rt305x_esw_port {
-+	bool	disable;
-+	bool	doubletag;
-+	bool	untag;
-+	u8	led;
-+	u16	pvid;
-+};
-+
-+struct rt305x_esw_vlan {
-+	u8	ports;
-+	u16	vid;
-+};
-+
-+struct rt305x_esw {
-+	struct device		*dev;
-+	void __iomem		*base;
-+	int			irq;
-+	const struct rt305x_esw_platform_data *pdata;
-+	/* Protects against concurrent register rmw operations. */
-+	spinlock_t		reg_rw_lock;
-+
-+	unsigned char		port_map;
-+	unsigned int		reg_initval_fct2;
-+	unsigned int		reg_initval_fpa2;
-+
-+
-+	struct switch_dev	swdev;
-+	bool			global_vlan_enable;
-+	bool			alt_vlan_disable;
-+	struct rt305x_esw_vlan vlans[RT305X_ESW_NUM_VLANS];
-+	struct rt305x_esw_port ports[RT305X_ESW_NUM_PORTS];
-+
-+};
-+
-+static inline void
-+rt305x_esw_wr(struct rt305x_esw *esw, u32 val, unsigned reg)
-+{
-+	__raw_writel(val, esw->base + reg);
-+}
-+
-+static inline u32
-+rt305x_esw_rr(struct rt305x_esw *esw, unsigned reg)
-+{
-+	return __raw_readl(esw->base + reg);
-+}
-+
-+static inline void
-+rt305x_esw_rmw_raw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
-+		   unsigned long val)
-+{
-+	unsigned long t;
-+
-+	t = __raw_readl(esw->base + reg) & ~mask;
-+	__raw_writel(t | val, esw->base + reg);
-+}
-+
-+static void
-+rt305x_esw_rmw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
-+	       unsigned long val)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&esw->reg_rw_lock, flags);
-+	rt305x_esw_rmw_raw(esw, reg, mask, val);
-+	spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
-+}
-+
-+static u32
-+rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr, u32 phy_register,
-+		 u32 write_data)
-+{
-+	unsigned long t_start = jiffies;
-+	int ret = 0;
-+
-+	while (1) {
-+		if (!(rt305x_esw_rr(esw, RT305X_ESW_REG_PCR1) &
-+		      RT305X_ESW_PCR1_WT_DONE))
-+			break;
-+		if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
-+			ret = 1;
-+			goto out;
-+		}
-+	}
-+
-+	write_data &= 0xffff;
-+	rt305x_esw_wr(esw,
-+		      (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
-+		      (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
-+		      (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
-+		      RT305X_ESW_REG_PCR0);
-+
-+	t_start = jiffies;
-+	while (1) {
-+		if (rt305x_esw_rr(esw, RT305X_ESW_REG_PCR1) &
-+		    RT305X_ESW_PCR1_WT_DONE)
-+			break;
-+
-+		if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
-+			ret = 1;
-+			break;
-+		}
-+	}
-+out:
-+	if (ret)
-+		printk(KERN_ERR "ramips_eth: MDIO timeout\n");
-+	return ret;
-+}
-+
-+static unsigned
-+rt305x_esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan)
-+{
-+	unsigned s;
-+	unsigned val;
-+
-+	s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
-+	val = rt305x_esw_rr(esw, RT305X_ESW_REG_VLANI(vlan / 2));
-+	val = (val >> s) & RT305X_ESW_VLANI_VID_M;
-+
-+	return val;
-+}
-+
-+static void
-+rt305x_esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid)
-+{
-+	unsigned s;
-+
-+	s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
-+	rt305x_esw_rmw(esw,
-+		       RT305X_ESW_REG_VLANI(vlan / 2),
-+		       RT305X_ESW_VLANI_VID_M << s,
-+		       (vid & RT305X_ESW_VLANI_VID_M) << s);
-+}
-+
-+static unsigned
-+rt305x_esw_get_pvid(struct rt305x_esw *esw, unsigned port)
-+{
-+	unsigned s, val;
-+
-+	s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
-+	val = rt305x_esw_rr(esw, RT305X_ESW_REG_PVIDC(port / 2));
-+	return (val >> s) & RT305X_ESW_PVIDC_PVID_M;
-+}
-+
-+static void
-+rt305x_esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid)
-+{
-+	unsigned s;
-+
-+	s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
-+	rt305x_esw_rmw(esw,
-+		       RT305X_ESW_REG_PVIDC(port / 2),
-+		       RT305X_ESW_PVIDC_PVID_M << s,
-+		       (pvid & RT305X_ESW_PVIDC_PVID_M) << s);
-+}
-+
-+static unsigned
-+rt305x_esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan)
-+{
-+	unsigned s, val;
-+
-+	s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
-+	val = rt305x_esw_rr(esw, RT305X_ESW_REG_VMSC(vlan / 4));
-+	val = (val >> s) & RT305X_ESW_VMSC_MSC_M;
-+
-+	return val;
-+}
-+
-+static void
-+rt305x_esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc)
-+{
-+	unsigned s;
-+
-+	s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
-+	rt305x_esw_rmw(esw,
-+		       RT305X_ESW_REG_VMSC(vlan / 4),
-+		       RT305X_ESW_VMSC_MSC_M << s,
-+		       (msc & RT305X_ESW_VMSC_MSC_M) << s);
-+}
-+
-+static unsigned
-+rt305x_esw_get_port_disable(struct rt305x_esw *esw)
-+{
-+	unsigned reg;
-+	reg = rt305x_esw_rr(esw, RT305X_ESW_REG_POC0);
-+	return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
-+	       RT305X_ESW_POC0_DIS_PORT_M;
-+}
-+
-+static void
-+rt305x_esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask)
-+{
-+	unsigned old_mask;
-+	unsigned enable_mask;
-+	unsigned changed;
-+	int i;
-+
-+	old_mask = rt305x_esw_get_port_disable(esw);
-+	changed = old_mask ^ disable_mask;
-+	enable_mask = old_mask & disable_mask;
-+
-+	/* enable before writing to MII */
-+	rt305x_esw_rmw(esw, RT305X_ESW_REG_POC0,
-+		       (RT305X_ESW_POC0_DIS_PORT_M <<
-+			RT305X_ESW_POC0_DIS_PORT_S),
-+		       enable_mask << RT305X_ESW_POC0_DIS_PORT_S);
-+
-+	for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) {
-+		if (!(changed & (1 << i)))
-+			continue;
-+		if (disable_mask & (1 << i)) {
-+			/* disable */
-+			rt305x_mii_write(esw, i, MII_BMCR,
-+					 BMCR_PDOWN);
-+		} else {
-+			/* enable */
-+			rt305x_mii_write(esw, i, MII_BMCR,
-+					 BMCR_FULLDPLX |
-+					 BMCR_ANENABLE |
-+					 BMCR_ANRESTART |
-+					 BMCR_SPEED100);
-+		}
-+	}
-+
-+	/* disable after writing to MII */
-+	rt305x_esw_rmw(esw, RT305X_ESW_REG_POC0,
-+		       (RT305X_ESW_POC0_DIS_PORT_M <<
-+			RT305X_ESW_POC0_DIS_PORT_S),
-+		       disable_mask << RT305X_ESW_POC0_DIS_PORT_S);
-+}
-+
-+static int
-+rt305x_esw_apply_config(struct switch_dev *dev);
-+
-+static void
-+rt305x_esw_hw_init(struct rt305x_esw *esw)
-+{
-+	int i;
-+	u8 port_disable = 0;
-+	u8 port_map = RT305X_ESW_PMAP_LLLLLL;
-+
-+	/* vodoo from original driver */
-+	rt305x_esw_wr(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
-+	rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_SGC2);
-+	/* Port priority 1 for all ports, vlan enabled. */
-+	rt305x_esw_wr(esw, 0x00005555 |
-+		      (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
-+		      RT305X_ESW_REG_PFC1);
-+
-+	/* Enable Back Pressure, and Flow Control */
-+	rt305x_esw_wr(esw,
-+		      ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
-+		       (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
-+		      RT305X_ESW_REG_POC0);
-+
-+	/* Enable Aging, and VLAN TAG removal */
-+	rt305x_esw_wr(esw,
-+		      ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
-+		       (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
-+		      RT305X_ESW_REG_POC2);
-+
-+	if (esw->reg_initval_fct2)
-+		rt305x_esw_wr(esw, esw->reg_initval_fct2, RT305X_ESW_REG_FCT2);
-+	else
-+		rt305x_esw_wr(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2);
-+
-+	/*
-+	 * 300s aging timer, max packet len 1536, broadcast storm prevention
-+	 * disabled, disable collision abort, mac xor48 hash, 10 packet back
-+	 * pressure jam, GMII disable was_transmit, back pressure disabled,
-+	 * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
-+	 * ports.
-+	 */
-+	rt305x_esw_wr(esw, 0x0008a301, RT305X_ESW_REG_SGC);
-+
-+	/* Setup SoC Port control register */
-+	rt305x_esw_wr(esw,
-+		      (RT305X_ESW_SOCPC_CRC_PADDING |
-+		       (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
-+		       (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
-+		       (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
-+		      RT305X_ESW_REG_SOCPC);
-+
-+	if (esw->reg_initval_fpa2)
-+		rt305x_esw_wr(esw, esw->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
-+	else
-+		rt305x_esw_wr(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
-+	rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_FPA);
-+
-+	/* Force Link/Activity on ports */
-+	rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P0LED);
-+	rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P1LED);
-+	rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P2LED);
-+	rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P3LED);
-+	rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P4LED);
-+
-+	/* Copy disabled port configuration from bootloader setup */
-+	port_disable = rt305x_esw_get_port_disable(esw);
-+	for (i = 0; i < 6; i++)
-+		esw->ports[i].disable = (port_disable & (1 << i)) != 0;
-+
-+	rt305x_mii_write(esw, 0, 31, 0x8000);
-+	for (i = 0; i < 5; i++) {
-+		if (esw->ports[i].disable) {
-+			rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
-+		} else {
-+			rt305x_mii_write(esw, i, MII_BMCR,
-+					 BMCR_FULLDPLX |
-+					 BMCR_ANENABLE |
-+					 BMCR_SPEED100);
-+		}
-+		/* TX10 waveform coefficient */
-+		rt305x_mii_write(esw, i, 26, 0x1601);
-+		/* TX100/TX10 AD/DA current bias */
-+		rt305x_mii_write(esw, i, 29, 0x7058);
-+		/* TX100 slew rate control */
-+		rt305x_mii_write(esw, i, 30, 0x0018);
-+	}
-+
-+	/* PHY IOT */
-+	/* select global register */
-+	rt305x_mii_write(esw, 0, 31, 0x0);
-+	/* tune TP_IDL tail and head waveform */
-+	rt305x_mii_write(esw, 0, 22, 0x052f);
-+	/* set TX10 signal amplitude threshold to minimum */
-+	rt305x_mii_write(esw, 0, 17, 0x0fe0);
-+	/* set squelch amplitude to higher threshold */
-+	rt305x_mii_write(esw, 0, 18, 0x40ba);
-+	/* longer TP_IDL tail length */
-+	rt305x_mii_write(esw, 0, 14, 0x65);
-+	/* select local register */
-+	rt305x_mii_write(esw, 0, 31, 0x8000);
-+
-+	if (esw->port_map)
-+		port_map = esw->port_map;
-+	else
-+		port_map = RT305X_ESW_PMAP_LLLLLL;
-+
-+	/*
-+	 * Unused HW feature, but still nice to be consistent here...
-+	 * This is also exported to userspace ('lan' attribute) so it's
-+	 * conveniently usable to decide which ports go into the wan vlan by
-+	 * default.
-+	 */
-+	rt305x_esw_rmw(esw, RT305X_ESW_REG_SGC2,
-+		       RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
-+		       port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
-+
-+	/* make the switch leds blink */
-+	for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
-+		esw->ports[i].led = 0x05;
-+
-+	/* Apply the empty config. */
-+	rt305x_esw_apply_config(&esw->swdev);
-+}
-+
-+static irqreturn_t
-+rt305x_esw_interrupt(int irq, void *_esw)
-+{
-+	struct rt305x_esw *esw = (struct rt305x_esw *) _esw;
-+	u32 status;
-+
-+	status = rt305x_esw_rr(esw, RT305X_ESW_REG_ISR);
-+	if (status & RT305X_ESW_PORT_ST_CHG) {
-+		u32 link = rt305x_esw_rr(esw, RT305X_ESW_REG_POA);
-+		link >>= RT305X_ESW_POA_LINK_SHIFT;
-+		link &= RT305X_ESW_POA_LINK_MASK;
-+		dev_info(esw->dev, "link changed 0x%02X\n", link);
-+	}
-+	rt305x_esw_wr(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void
-+rt305x_esw_request_irq(struct rt305x_esw *esw)
-+{
-+	/* Only unmask the port change interrupt */
-+	rt305x_esw_wr(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
-+
-+	/* request the irq handler */
-+	request_irq(esw->irq, rt305x_esw_interrupt, 0, "esw", esw);
-+}
-+
-+static int
-+rt305x_esw_apply_config(struct switch_dev *dev)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+	int i;
-+	u8 disable = 0;
-+	u8 doubletag = 0;
-+	u8 en_vlan = 0;
-+	u8 untag = 0;
-+
-+	for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
-+		u32 vid, vmsc;
-+		if (esw->global_vlan_enable) {
-+			vid = esw->vlans[i].vid;
-+			vmsc = esw->vlans[i].ports;
-+		} else {
-+			vid = RT305X_ESW_VLAN_NONE;
-+			vmsc = RT305X_ESW_PORTS_NONE;
-+		}
-+		rt305x_esw_set_vlan_id(esw, i, vid);
-+		rt305x_esw_set_vmsc(esw, i, vmsc);
-+	}
-+
-+	for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
-+		u32 pvid;
-+		disable |= esw->ports[i].disable << i;
-+		if (esw->global_vlan_enable) {
-+			doubletag |= esw->ports[i].doubletag << i;
-+			en_vlan   |= 1                       << i;
-+			untag     |= esw->ports[i].untag     << i;
-+			pvid       = esw->ports[i].pvid;
-+		} else {
-+			int x = esw->alt_vlan_disable ? 0 : 1;
-+			doubletag |= x << i;
-+			en_vlan   |= x << i;
-+			untag     |= x << i;
-+			pvid       = 0;
-+		}
-+		rt305x_esw_set_pvid(esw, i, pvid);
-+		if (i < RT305X_ESW_NUM_LEDS)
-+			rt305x_esw_wr(esw, esw->ports[i].led,
-+				      RT305X_ESW_REG_P0LED + 4*i);
-+	}
-+
-+	rt305x_esw_set_port_disable(esw, disable);
-+	rt305x_esw_rmw(esw, RT305X_ESW_REG_SGC2,
-+		       (RT305X_ESW_SGC2_DOUBLE_TAG_M <<
-+			RT305X_ESW_SGC2_DOUBLE_TAG_S),
-+		       doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S);
-+	rt305x_esw_rmw(esw, RT305X_ESW_REG_PFC1,
-+		       RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S,
-+		       en_vlan << RT305X_ESW_PFC1_EN_VLAN_S);
-+	rt305x_esw_rmw(esw, RT305X_ESW_REG_POC2,
-+		       RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S,
-+		       untag << RT305X_ESW_POC2_UNTAG_EN_S);
-+
-+	if (!esw->global_vlan_enable) {
-+		/*
-+		 * Still need to put all ports into vlan 0 or they'll be
-+		 * isolated.
-+		 * NOTE: vlan 0 is special, no vlan tag is prepended
-+		 */
-+		rt305x_esw_set_vlan_id(esw, 0, 0);
-+		rt305x_esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL);
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_reset_switch(struct switch_dev *dev)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+	esw->global_vlan_enable = 0;
-+	memset(esw->ports, 0, sizeof(esw->ports));
-+	memset(esw->vlans, 0, sizeof(esw->vlans));
-+	rt305x_esw_hw_init(esw);
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_get_vlan_enable(struct switch_dev *dev,
-+			   const struct switch_attr *attr,
-+			   struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+	val->value.i = esw->global_vlan_enable;
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_set_vlan_enable(struct switch_dev *dev,
-+			   const struct switch_attr *attr,
-+			   struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+	esw->global_vlan_enable = val->value.i != 0;
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_get_alt_vlan_disable(struct switch_dev *dev,
-+				const struct switch_attr *attr,
-+				struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+	val->value.i = esw->alt_vlan_disable;
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_set_alt_vlan_disable(struct switch_dev *dev,
-+				const struct switch_attr *attr,
-+				struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+	esw->alt_vlan_disable = val->value.i != 0;
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_get_port_link(struct switch_dev *dev,
-+			 int port,
-+			 struct switch_port_link *link)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+	u32 speed, poa;
-+
-+	if (port < 0 || port >= RT305X_ESW_NUM_PORTS)
-+		return -EINVAL;
-+
-+	poa = rt305x_esw_rr(esw, RT305X_ESW_REG_POA) >> port;
-+
-+	link->link = (poa >> RT305X_ESW_LINK_S) & 1;
-+	link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1;
-+	if (port < RT305X_ESW_NUM_LEDS) {
-+		speed = (poa >> RT305X_ESW_SPD_S) & 1;
-+	} else {
-+		if (port == RT305X_ESW_NUM_PORTS - 1)
-+			poa >>= 1;
-+		speed = (poa >> RT305X_ESW_SPD_S) & 3;
-+	}
-+	switch (speed) {
-+	case 0:
-+		link->speed = SWITCH_PORT_SPEED_10;
-+		break;
-+	case 1:
-+		link->speed = SWITCH_PORT_SPEED_100;
-+		break;
-+	case 2:
-+	case 3: /* forced gige speed can be 2 or 3 */
-+		link->speed = SWITCH_PORT_SPEED_1000;
-+		break;
-+	default:
-+		link->speed = SWITCH_PORT_SPEED_UNKNOWN;
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_get_port_bool(struct switch_dev *dev,
-+			 const struct switch_attr *attr,
-+			 struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+	int idx = val->port_vlan;
-+	u32 x, reg, shift;
-+
-+	if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS)
-+		return -EINVAL;
-+
-+	switch (attr->id) {
-+	case RT305X_ESW_ATTR_PORT_DISABLE:
-+		reg = RT305X_ESW_REG_POC0;
-+		shift = RT305X_ESW_POC0_DIS_PORT_S;
-+		break;
-+	case RT305X_ESW_ATTR_PORT_DOUBLETAG:
-+		reg = RT305X_ESW_REG_SGC2;
-+		shift = RT305X_ESW_SGC2_DOUBLE_TAG_S;
-+		break;
-+	case RT305X_ESW_ATTR_PORT_UNTAG:
-+		reg = RT305X_ESW_REG_POC2;
-+		shift = RT305X_ESW_POC2_UNTAG_EN_S;
-+		break;
-+	case RT305X_ESW_ATTR_PORT_LAN:
-+		reg = RT305X_ESW_REG_SGC2;
-+		shift = RT305X_ESW_SGC2_LAN_PMAP_S;
-+		if (idx >= RT305X_ESW_NUM_LANWAN)
-+			return -EINVAL;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	x = rt305x_esw_rr(esw, reg);
-+	val->value.i = (x >> (idx + shift)) & 1;
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_set_port_bool(struct switch_dev *dev,
-+			 const struct switch_attr *attr,
-+			 struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+	int idx = val->port_vlan;
-+
-+	if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
-+	    val->value.i < 0 || val->value.i > 1)
-+		return -EINVAL;
-+
-+	switch (attr->id) {
-+	case RT305X_ESW_ATTR_PORT_DISABLE:
-+		esw->ports[idx].disable = val->value.i;
-+		break;
-+	case RT305X_ESW_ATTR_PORT_DOUBLETAG:
-+		esw->ports[idx].doubletag = val->value.i;
-+		break;
-+	case RT305X_ESW_ATTR_PORT_UNTAG:
-+		esw->ports[idx].untag = val->value.i;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_get_port_recv_badgood(struct switch_dev *dev,
-+				 const struct switch_attr *attr,
-+				 struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+	int idx = val->port_vlan;
-+	int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16;
-+	u32 reg;
-+
-+	if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
-+		return -EINVAL;
-+
-+	reg = rt305x_esw_rr(esw, RT305X_ESW_REG_P0PC + 4*idx);
-+	val->value.i = (reg >> shift) & 0xffff;
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_get_port_led(struct switch_dev *dev,
-+			const struct switch_attr *attr,
-+			struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+	int idx = val->port_vlan;
-+
-+	if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
-+	    idx >= RT305X_ESW_NUM_LEDS)
-+		return -EINVAL;
-+
-+	val->value.i = rt305x_esw_rr(esw, RT305X_ESW_REG_P0LED + 4*idx);
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_set_port_led(struct switch_dev *dev,
-+			const struct switch_attr *attr,
-+			struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+	int idx = val->port_vlan;
-+
-+	if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS)
-+		return -EINVAL;
-+
-+	esw->ports[idx].led = val->value.i;
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+	if (port >= RT305X_ESW_NUM_PORTS)
-+		return -EINVAL;
-+
-+	*val = rt305x_esw_get_pvid(esw, port);
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_set_port_pvid(struct switch_dev *dev, int port, int val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+	if (port >= RT305X_ESW_NUM_PORTS)
-+		return -EINVAL;
-+
-+	esw->ports[port].pvid = val;
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+	u32 vmsc, poc2;
-+	int vlan_idx = -1;
-+	int i;
-+
-+	val->len = 0;
-+
-+	if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS)
-+		return -EINVAL;
-+
-+	/* valid vlan? */
-+	for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
-+		if (rt305x_esw_get_vlan_id(esw, i) == val->port_vlan &&
-+		    rt305x_esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) {
-+			vlan_idx = i;
-+			break;
-+		}
-+	}
-+
-+	if (vlan_idx == -1)
-+		return -EINVAL;
-+
-+	vmsc = rt305x_esw_get_vmsc(esw, vlan_idx);
-+	poc2 = rt305x_esw_rr(esw, RT305X_ESW_REG_POC2);
-+
-+	for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
-+		struct switch_port *p;
-+		int port_mask = 1 << i;
-+
-+		if (!(vmsc & port_mask))
-+			continue;
-+
-+		p = &val->value.ports[val->len++];
-+		p->id = i;
-+		if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S))
-+			p->flags = 0;
-+		else
-+			p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+rt305x_esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+	int ports;
-+	int vlan_idx = -1;
-+	int i;
-+
-+	if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS ||
-+	    val->len > RT305X_ESW_NUM_PORTS)
-+		return -EINVAL;
-+
-+	/* one of the already defined vlans? */
-+	for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
-+		if (esw->vlans[i].vid == val->port_vlan &&
-+		    esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) {
-+			vlan_idx = i;
-+			break;
-+		}
-+	}
-+
-+	/* select a free slot */
-+	for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) {
-+		if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE)
-+			vlan_idx = i;
-+	}
-+
-+	/* bail if all slots are in use */
-+	if (vlan_idx == -1)
-+		return -EINVAL;
-+
-+	ports = RT305X_ESW_PORTS_NONE;
-+	for (i = 0; i < val->len; i++) {
-+		struct switch_port *p = &val->value.ports[i];
-+		int port_mask = 1 << p->id;
-+		bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
-+
-+		if (p->id >= RT305X_ESW_NUM_PORTS)
-+			return -EINVAL;
-+
-+		ports |= port_mask;
-+		esw->ports[p->id].untag = untagged;
-+	}
-+	esw->vlans[vlan_idx].ports = ports;
-+	if (ports == RT305X_ESW_PORTS_NONE)
-+		esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE;
-+	else
-+		esw->vlans[vlan_idx].vid = val->port_vlan;
-+
-+	return 0;
-+}
-+
-+static const struct switch_attr rt305x_esw_global[] = {
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "enable_vlan",
-+		.description = "VLAN mode (1:enabled)",
-+		.max = 1,
-+		.id = RT305X_ESW_ATTR_ENABLE_VLAN,
-+		.get = rt305x_esw_get_vlan_enable,
-+		.set = rt305x_esw_set_vlan_enable,
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "alternate_vlan_disable",
-+		.description = "Use en_vlan instead of doubletag to disable"
-+				" VLAN mode",
-+		.max = 1,
-+		.id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
-+		.get = rt305x_esw_get_alt_vlan_disable,
-+		.set = rt305x_esw_set_alt_vlan_disable,
-+	},
-+};
-+
-+static const struct switch_attr rt305x_esw_port[] = {
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "disable",
-+		.description = "Port state (1:disabled)",
-+		.max = 1,
-+		.id = RT305X_ESW_ATTR_PORT_DISABLE,
-+		.get = rt305x_esw_get_port_bool,
-+		.set = rt305x_esw_set_port_bool,
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "doubletag",
-+		.description = "Double tagging for incoming vlan packets "
-+				"(1:enabled)",
-+		.max = 1,
-+		.id = RT305X_ESW_ATTR_PORT_DOUBLETAG,
-+		.get = rt305x_esw_get_port_bool,
-+		.set = rt305x_esw_set_port_bool,
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "untag",
-+		.description = "Untag (1:strip outgoing vlan tag)",
-+		.max = 1,
-+		.id = RT305X_ESW_ATTR_PORT_UNTAG,
-+		.get = rt305x_esw_get_port_bool,
-+		.set = rt305x_esw_set_port_bool,
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "led",
-+		.description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity,"
-+				" 4:collision, 5:linkact, 6:duplcoll, 7:10mact,"
-+				" 8:100mact, 10:blink, 12:on)",
-+		.max = 15,
-+		.id = RT305X_ESW_ATTR_PORT_LED,
-+		.get = rt305x_esw_get_port_led,
-+		.set = rt305x_esw_set_port_led,
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "lan",
-+		.description = "HW port group (0:wan, 1:lan)",
-+		.max = 1,
-+		.id = RT305X_ESW_ATTR_PORT_LAN,
-+		.get = rt305x_esw_get_port_bool,
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "recv_bad",
-+		.description = "Receive bad packet counter",
-+		.id = RT305X_ESW_ATTR_PORT_RECV_BAD,
-+		.get = rt305x_esw_get_port_recv_badgood,
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "recv_good",
-+		.description = "Receive good packet counter",
-+		.id = RT305X_ESW_ATTR_PORT_RECV_GOOD,
-+		.get = rt305x_esw_get_port_recv_badgood,
-+	},
-+};
-+
-+static const struct switch_attr rt305x_esw_vlan[] = {
-+};
-+
-+static const struct switch_dev_ops rt305x_esw_ops = {
-+	.attr_global = {
-+		.attr = rt305x_esw_global,
-+		.n_attr = ARRAY_SIZE(rt305x_esw_global),
-+	},
-+	.attr_port = {
-+		.attr = rt305x_esw_port,
-+		.n_attr = ARRAY_SIZE(rt305x_esw_port),
-+	},
-+	.attr_vlan = {
-+		.attr = rt305x_esw_vlan,
-+		.n_attr = ARRAY_SIZE(rt305x_esw_vlan),
-+	},
-+	.get_vlan_ports = rt305x_esw_get_vlan_ports,
-+	.set_vlan_ports = rt305x_esw_set_vlan_ports,
-+	.get_port_pvid = rt305x_esw_get_port_pvid,
-+	.set_port_pvid = rt305x_esw_set_port_pvid,
-+	.get_port_link = rt305x_esw_get_port_link,
-+	.apply_config = rt305x_esw_apply_config,
-+	.reset_switch = rt305x_esw_reset_switch,
-+};
-+
-+static struct rt305x_esw_platform_data rt3050_esw_data = {
-+	/* All ports are LAN ports. */
-+	.vlan_config            = RT305X_ESW_VLAN_CONFIG_NONE,
-+	.reg_initval_fct2       = 0x00d6500c,
-+	/*
-+	 * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
-+	 * turbo mii off, rgmi 3.3v off
-+	 * port5: disabled
-+	 * port6: enabled, gige, full-duplex, rx/tx-flow-control
-+	 */
-+	.reg_initval_fpa2       = 0x3f502b28,
-+};
-+
-+static const struct of_device_id ralink_esw_match[] = {
-+	{ .compatible = "ralink,rt3050-esw", .data = &rt3050_esw_data },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_esw_match);
-+
-+static int
-+rt305x_esw_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	const struct rt305x_esw_platform_data *pdata;
-+	const __be32 *port_map, *reg_init;
-+	struct rt305x_esw *esw;
-+	struct switch_dev *swdev;
-+	struct resource *res, *irq;
-+	int err;
-+
-+	pdata = pdev->dev.platform_data;
-+	if (!pdata) {
-+		const struct of_device_id *match;
-+		match = of_match_device(ralink_esw_match, &pdev->dev);
-+		if (match)
-+			pdata = (struct rt305x_esw_platform_data *) match->data;
-+	}
-+	if (!pdata)
-+		return -EINVAL;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		dev_err(&pdev->dev, "no memory resource found\n");
-+		return -ENOMEM;
-+	}
-+
-+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+	if (!irq) {
-+		dev_err(&pdev->dev, "no irq resource found\n");
-+		return -ENOMEM;
-+	}
-+
-+	esw = kzalloc(sizeof(struct rt305x_esw), GFP_KERNEL);
-+	if (!esw) {
-+		dev_err(&pdev->dev, "no memory for private data\n");
-+		return -ENOMEM;
-+	}
-+
-+	esw->dev = &pdev->dev;
-+	esw->irq = irq->start;
-+	esw->base = ioremap(res->start, resource_size(res));
-+	if (!esw->base) {
-+		dev_err(&pdev->dev, "ioremap failed\n");
-+		err = -ENOMEM;
-+		goto free_esw;
-+	}
-+
-+	port_map = of_get_property(np, "ralink,portmap", NULL);
-+        if (port_map)
-+		esw->port_map = be32_to_cpu(*port_map);
-+
-+	reg_init = of_get_property(np, "ralink,fct2", NULL);
-+        if (reg_init)
-+		esw->reg_initval_fct2 = be32_to_cpu(*reg_init);
-+
-+	reg_init = of_get_property(np, "ralink,fpa2", NULL);
-+        if (reg_init)
-+		esw->reg_initval_fpa2 = be32_to_cpu(*reg_init);
-+
-+	swdev = &esw->swdev;
-+	swdev->of_node = pdev->dev.of_node;
-+	swdev->name = "rt305x-esw";
-+	swdev->alias = "rt305x";
-+	swdev->cpu_port = RT305X_ESW_PORT6;
-+	swdev->ports = RT305X_ESW_NUM_PORTS;
-+	swdev->vlans = RT305X_ESW_NUM_VIDS;
-+	swdev->ops = &rt305x_esw_ops;
-+
-+	err = register_switch(swdev, NULL);
-+	if (err < 0) {
-+		dev_err(&pdev->dev, "register_switch failed\n");
-+		goto unmap_base;
-+	}
-+
-+	platform_set_drvdata(pdev, esw);
-+
-+	esw->pdata = pdata;
-+	spin_lock_init(&esw->reg_rw_lock);
-+	rt305x_esw_hw_init(esw);
-+	rt305x_esw_request_irq(esw);
-+
-+	return 0;
-+
-+unmap_base:
-+	iounmap(esw->base);
-+free_esw:
-+	kfree(esw);
-+	return err;
-+}
-+
-+static int
-+rt305x_esw_remove(struct platform_device *pdev)
-+{
-+	struct rt305x_esw *esw;
-+
-+	esw = platform_get_drvdata(pdev);
-+	if (esw) {
-+		unregister_switch(&esw->swdev);
-+		platform_set_drvdata(pdev, NULL);
-+		iounmap(esw->base);
-+		kfree(esw);
-+	}
-+
-+	return 0;
-+}
-+
-+static struct platform_driver rt305x_esw_driver = {
-+	.probe = rt305x_esw_probe,
-+	.remove = rt305x_esw_remove,
-+	.driver = {
-+		.name = "rt305x-esw",
-+		.owner = THIS_MODULE,
-+		.of_match_table = ralink_esw_match,
-+	},
-+};
-+
-+static int __init
-+rt305x_esw_init(void)
-+{
-+	return platform_driver_register(&rt305x_esw_driver);
-+}
-+
-+static void
-+rt305x_esw_exit(void)
-+{
-+	platform_driver_unregister(&rt305x_esw_driver);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/ramips/ramips_eth.h
-@@ -0,0 +1,375 @@
-+/*
-+ *   This program is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; version 2 of the License
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ *   based on Ralink SDK3.3
-+ *   Copyright (C) 2009 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef RAMIPS_ETH_H
-+#define RAMIPS_ETH_H
-+
-+#include <linux/mii.h>
-+#include <linux/interrupt.h>
-+#include <linux/netdevice.h>
-+#include <linux/dma-mapping.h>
-+
-+#define NUM_RX_DESC     256
-+#define NUM_TX_DESC     256
-+
-+#define RAMIPS_DELAY_EN_INT		0x80
-+#define RAMIPS_DELAY_MAX_INT		0x04
-+#define RAMIPS_DELAY_MAX_TOUT		0x04
-+#define RAMIPS_DELAY_CHAN		(((RAMIPS_DELAY_EN_INT | RAMIPS_DELAY_MAX_INT) << 8) | RAMIPS_DELAY_MAX_TOUT)
-+#define RAMIPS_DELAY_INIT		((RAMIPS_DELAY_CHAN << 16) | RAMIPS_DELAY_CHAN)
-+#define RAMIPS_PSE_FQFC_CFG_INIT	0x80504000
-+
-+/* interrupt bits */
-+#define RAMIPS_CNT_PPE_AF		BIT(31)
-+#define RAMIPS_CNT_GDM_AF		BIT(29)
-+#define RAMIPS_PSE_P2_FC		BIT(26)
-+#define RAMIPS_PSE_BUF_DROP		BIT(24)
-+#define RAMIPS_GDM_OTHER_DROP		BIT(23)
-+#define RAMIPS_PSE_P1_FC		BIT(22)
-+#define RAMIPS_PSE_P0_FC		BIT(21)
-+#define RAMIPS_PSE_FQ_EMPTY		BIT(20)
-+#define RAMIPS_GE1_STA_CHG		BIT(18)
-+#define RAMIPS_TX_COHERENT		BIT(17)
-+#define RAMIPS_RX_COHERENT		BIT(16)
-+#define RAMIPS_TX_DONE_INT3		BIT(11)
-+#define RAMIPS_TX_DONE_INT2		BIT(10)
-+#define RAMIPS_TX_DONE_INT1		BIT(9)
-+#define RAMIPS_TX_DONE_INT0		BIT(8)
-+#define RAMIPS_RX_DONE_INT0		BIT(2)
-+#define RAMIPS_TX_DLY_INT		BIT(1)
-+#define RAMIPS_RX_DLY_INT		BIT(0)
-+
-+#define RT5350_RX_DLY_INT		BIT(30)
-+#define RT5350_TX_DLY_INT		BIT(28)
-+
-+/* registers */
-+#define RAMIPS_FE_OFFSET		0x0000
-+#define RAMIPS_GDMA_OFFSET		0x0020
-+#define RAMIPS_PSE_OFFSET		0x0040
-+#define RAMIPS_GDMA2_OFFSET		0x0060
-+#define RAMIPS_CDMA_OFFSET		0x0080
-+#define RAMIPS_PDMA_OFFSET		0x0100
-+#define RAMIPS_PPE_OFFSET		0x0200
-+#define RAMIPS_CMTABLE_OFFSET		0x0400
-+#define RAMIPS_POLICYTABLE_OFFSET	0x1000
-+
-+#define RT5350_PDMA_OFFSET		0x0800
-+#define RT5350_SDM_OFFSET		0x0c00
-+
-+#define RAMIPS_MDIO_ACCESS		(RAMIPS_FE_OFFSET + 0x00)
-+#define RAMIPS_MDIO_CFG			(RAMIPS_FE_OFFSET + 0x04)
-+#define RAMIPS_FE_GLO_CFG		(RAMIPS_FE_OFFSET + 0x08)
-+#define RAMIPS_FE_RST_GL		(RAMIPS_FE_OFFSET + 0x0C)
-+#define RAMIPS_FE_INT_STATUS		(RAMIPS_FE_OFFSET + 0x10)
-+#define RAMIPS_FE_INT_ENABLE		(RAMIPS_FE_OFFSET + 0x14)
-+#define RAMIPS_MDIO_CFG2		(RAMIPS_FE_OFFSET + 0x18)
-+#define RAMIPS_FOC_TS_T			(RAMIPS_FE_OFFSET + 0x1C)
-+
-+#define	RAMIPS_GDMA1_FWD_CFG		(RAMIPS_GDMA_OFFSET + 0x00)
-+#define RAMIPS_GDMA1_SCH_CFG		(RAMIPS_GDMA_OFFSET + 0x04)
-+#define RAMIPS_GDMA1_SHPR_CFG		(RAMIPS_GDMA_OFFSET + 0x08)
-+#define RAMIPS_GDMA1_MAC_ADRL		(RAMIPS_GDMA_OFFSET + 0x0C)
-+#define RAMIPS_GDMA1_MAC_ADRH		(RAMIPS_GDMA_OFFSET + 0x10)
-+
-+#define	RAMIPS_GDMA2_FWD_CFG		(RAMIPS_GDMA2_OFFSET + 0x00)
-+#define RAMIPS_GDMA2_SCH_CFG		(RAMIPS_GDMA2_OFFSET + 0x04)
-+#define RAMIPS_GDMA2_SHPR_CFG		(RAMIPS_GDMA2_OFFSET + 0x08)
-+#define RAMIPS_GDMA2_MAC_ADRL		(RAMIPS_GDMA2_OFFSET + 0x0C)
-+#define RAMIPS_GDMA2_MAC_ADRH		(RAMIPS_GDMA2_OFFSET + 0x10)
-+
-+#define RAMIPS_PSE_FQ_CFG		(RAMIPS_PSE_OFFSET + 0x00)
-+#define RAMIPS_CDMA_FC_CFG		(RAMIPS_PSE_OFFSET + 0x04)
-+#define RAMIPS_GDMA1_FC_CFG		(RAMIPS_PSE_OFFSET + 0x08)
-+#define RAMIPS_GDMA2_FC_CFG		(RAMIPS_PSE_OFFSET + 0x0C)
-+
-+#define RAMIPS_CDMA_CSG_CFG		(RAMIPS_CDMA_OFFSET + 0x00)
-+#define RAMIPS_CDMA_SCH_CFG		(RAMIPS_CDMA_OFFSET + 0x04)
-+
-+#define RT5350_TX_BASE_PTR0		(RT5350_PDMA_OFFSET + 0x00)
-+#define RT5350_TX_MAX_CNT0		(RT5350_PDMA_OFFSET + 0x04)
-+#define RT5350_TX_CTX_IDX0		(RT5350_PDMA_OFFSET + 0x08)
-+#define RT5350_TX_DTX_IDX0		(RT5350_PDMA_OFFSET + 0x0C)
-+#define RT5350_TX_BASE_PTR1		(RT5350_PDMA_OFFSET + 0x10)
-+#define RT5350_TX_MAX_CNT1		(RT5350_PDMA_OFFSET + 0x14)
-+#define RT5350_TX_CTX_IDX1		(RT5350_PDMA_OFFSET + 0x18)
-+#define RT5350_TX_DTX_IDX1		(RT5350_PDMA_OFFSET + 0x1C)
-+#define RT5350_TX_BASE_PTR2		(RT5350_PDMA_OFFSET + 0x20)
-+#define RT5350_TX_MAX_CNT2		(RT5350_PDMA_OFFSET + 0x24)
-+#define RT5350_TX_CTX_IDX2		(RT5350_PDMA_OFFSET + 0x28)
-+#define RT5350_TX_DTX_IDX2		(RT5350_PDMA_OFFSET + 0x2C)
-+#define RT5350_TX_BASE_PTR3		(RT5350_PDMA_OFFSET + 0x30)
-+#define RT5350_TX_MAX_CNT3		(RT5350_PDMA_OFFSET + 0x34)
-+#define RT5350_TX_CTX_IDX3		(RT5350_PDMA_OFFSET + 0x38)
-+#define RT5350_TX_DTX_IDX3		(RT5350_PDMA_OFFSET + 0x3C)
-+#define RT5350_RX_BASE_PTR0		(RT5350_PDMA_OFFSET + 0x100)
-+#define RT5350_RX_MAX_CNT0		(RT5350_PDMA_OFFSET + 0x104)
-+#define RT5350_RX_CALC_IDX0		(RT5350_PDMA_OFFSET + 0x108)
-+#define RT5350_RX_DRX_IDX0		(RT5350_PDMA_OFFSET + 0x10C)
-+#define RT5350_RX_BASE_PTR1		(RT5350_PDMA_OFFSET + 0x110)
-+#define RT5350_RX_MAX_CNT1		(RT5350_PDMA_OFFSET + 0x114)
-+#define RT5350_RX_CALC_IDX1		(RT5350_PDMA_OFFSET + 0x118)
-+#define RT5350_RX_DRX_IDX1		(RT5350_PDMA_OFFSET + 0x11C)
-+#define RT5350_PDMA_GLO_CFG		(RT5350_PDMA_OFFSET + 0x204)
-+#define RT5350_PDMA_RST_CFG		(RT5350_PDMA_OFFSET + 0x208)
-+#define RT5350_DLY_INT_CFG		(RT5350_PDMA_OFFSET + 0x20c)
-+#define RT5350_FE_INT_STATUS		(RT5350_PDMA_OFFSET + 0x220)
-+#define RT5350_FE_INT_ENABLE		(RT5350_PDMA_OFFSET + 0x228)
-+#define RT5350_PDMA_SCH_CFG		(RT5350_PDMA_OFFSET + 0x280)
-+
-+
-+#define RAMIPS_PDMA_GLO_CFG		(RAMIPS_PDMA_OFFSET + 0x00)
-+#define RAMIPS_PDMA_RST_CFG		(RAMIPS_PDMA_OFFSET + 0x04)
-+#define RAMIPS_PDMA_SCH_CFG		(RAMIPS_PDMA_OFFSET + 0x08)
-+#define RAMIPS_DLY_INT_CFG		(RAMIPS_PDMA_OFFSET + 0x0C)
-+#define RAMIPS_TX_BASE_PTR0		(RAMIPS_PDMA_OFFSET + 0x10)
-+#define RAMIPS_TX_MAX_CNT0		(RAMIPS_PDMA_OFFSET + 0x14)
-+#define RAMIPS_TX_CTX_IDX0		(RAMIPS_PDMA_OFFSET + 0x18)
-+#define RAMIPS_TX_DTX_IDX0		(RAMIPS_PDMA_OFFSET + 0x1C)
-+#define RAMIPS_TX_BASE_PTR1		(RAMIPS_PDMA_OFFSET + 0x20)
-+#define RAMIPS_TX_MAX_CNT1		(RAMIPS_PDMA_OFFSET + 0x24)
-+#define RAMIPS_TX_CTX_IDX1		(RAMIPS_PDMA_OFFSET + 0x28)
-+#define RAMIPS_TX_DTX_IDX1		(RAMIPS_PDMA_OFFSET + 0x2C)
-+#define RAMIPS_RX_BASE_PTR0		(RAMIPS_PDMA_OFFSET + 0x30)
-+#define RAMIPS_RX_MAX_CNT0		(RAMIPS_PDMA_OFFSET + 0x34)
-+#define RAMIPS_RX_CALC_IDX0		(RAMIPS_PDMA_OFFSET + 0x38)
-+#define RAMIPS_RX_DRX_IDX0		(RAMIPS_PDMA_OFFSET + 0x3C)
-+#define RAMIPS_TX_BASE_PTR2		(RAMIPS_PDMA_OFFSET + 0x40)
-+#define RAMIPS_TX_MAX_CNT2		(RAMIPS_PDMA_OFFSET + 0x44)
-+#define RAMIPS_TX_CTX_IDX2		(RAMIPS_PDMA_OFFSET + 0x48)
-+#define RAMIPS_TX_DTX_IDX2		(RAMIPS_PDMA_OFFSET + 0x4C)
-+#define RAMIPS_TX_BASE_PTR3		(RAMIPS_PDMA_OFFSET + 0x50)
-+#define RAMIPS_TX_MAX_CNT3		(RAMIPS_PDMA_OFFSET + 0x54)
-+#define RAMIPS_TX_CTX_IDX3		(RAMIPS_PDMA_OFFSET + 0x58)
-+#define RAMIPS_TX_DTX_IDX3		(RAMIPS_PDMA_OFFSET + 0x5C)
-+#define RAMIPS_RX_BASE_PTR1		(RAMIPS_PDMA_OFFSET + 0x60)
-+#define RAMIPS_RX_MAX_CNT1		(RAMIPS_PDMA_OFFSET + 0x64)
-+#define RAMIPS_RX_CALC_IDX1		(RAMIPS_PDMA_OFFSET + 0x68)
-+#define RAMIPS_RX_DRX_IDX1		(RAMIPS_PDMA_OFFSET + 0x6C)
-+
-+#define RT5350_SDM_CFG			(RT5350_SDM_OFFSET + 0x00)  //Switch DMA configuration
-+#define RT5350_SDM_RRING		(RT5350_SDM_OFFSET + 0x04)  //Switch DMA Rx Ring
-+#define RT5350_SDM_TRING		(RT5350_SDM_OFFSET + 0x08)  //Switch DMA Tx Ring
-+#define RT5350_SDM_MAC_ADRL		(RT5350_SDM_OFFSET + 0x0C)  //Switch MAC address LSB
-+#define RT5350_SDM_MAC_ADRH		(RT5350_SDM_OFFSET + 0x10)  //Switch MAC Address MSB
-+#define RT5350_SDM_TPCNT		(RT5350_SDM_OFFSET + 0x100) //Switch DMA Tx packet count
-+#define RT5350_SDM_TBCNT		(RT5350_SDM_OFFSET + 0x104) //Switch DMA Tx byte count
-+#define RT5350_SDM_RPCNT		(RT5350_SDM_OFFSET + 0x108) //Switch DMA rx packet count
-+#define RT5350_SDM_RBCNT		(RT5350_SDM_OFFSET + 0x10C) //Switch DMA rx byte count
-+#define RT5350_SDM_CS_ERR		(RT5350_SDM_OFFSET + 0x110) //Switch DMA rx checksum error count
-+
-+#define RT5350_SDM_ICS_EN		BIT(16)
-+#define RT5350_SDM_TCS_EN		BIT(17)
-+#define RT5350_SDM_UCS_EN		BIT(18)
-+
-+
-+/* MDIO_CFG register bits */
-+#define RAMIPS_MDIO_CFG_AUTO_POLL_EN	BIT(29)
-+#define RAMIPS_MDIO_CFG_GP1_BP_EN	BIT(16)
-+#define RAMIPS_MDIO_CFG_GP1_FRC_EN	BIT(15)
-+#define RAMIPS_MDIO_CFG_GP1_SPEED_10	(0 << 13)
-+#define RAMIPS_MDIO_CFG_GP1_SPEED_100	(1 << 13)
-+#define RAMIPS_MDIO_CFG_GP1_SPEED_1000	(2 << 13)
-+#define RAMIPS_MDIO_CFG_GP1_DUPLEX	BIT(12)
-+#define RAMIPS_MDIO_CFG_GP1_FC_TX	BIT(11)
-+#define RAMIPS_MDIO_CFG_GP1_FC_RX	BIT(10)
-+#define RAMIPS_MDIO_CFG_GP1_LNK_DWN	BIT(9)
-+#define RAMIPS_MDIO_CFG_GP1_AN_FAIL	BIT(8)
-+#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_1	(0 << 6)
-+#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_2	(1 << 6)
-+#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_4	(2 << 6)
-+#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_8	(3 << 6)
-+#define RAMIPS_MDIO_CFG_TURBO_MII_FREQ	BIT(5)
-+#define RAMIPS_MDIO_CFG_TURBO_MII_MODE	BIT(4)
-+#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_0	(0 << 2)
-+#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_200	(1 << 2)
-+#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_400	(2 << 2)
-+#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_INV	(3 << 2)
-+#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_0	0
-+#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_200	1
-+#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_400	2
-+#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_INV	3
-+
-+/* uni-cast port */
-+#define RAMIPS_GDM1_ICS_EN		BIT(22)
-+#define RAMIPS_GDM1_TCS_EN		BIT(21)
-+#define RAMIPS_GDM1_UCS_EN		BIT(20)
-+#define RAMIPS_GDM1_JMB_EN		BIT(19)
-+#define RAMIPS_GDM1_STRPCRC		BIT(16)
-+#define RAMIPS_GDM1_UFRC_P_CPU		(0 << 12)
-+#define RAMIPS_GDM1_UFRC_P_GDMA1	(1 << 12)
-+#define RAMIPS_GDM1_UFRC_P_PPE		(6 << 12)
-+
-+/* checksums */
-+#define RAMIPS_ICS_GEN_EN		BIT(2)
-+#define RAMIPS_UCS_GEN_EN		BIT(1)
-+#define RAMIPS_TCS_GEN_EN		BIT(0)
-+
-+/* dma ring */
-+#define RAMIPS_PST_DRX_IDX0		BIT(16)
-+#define RAMIPS_PST_DTX_IDX3		BIT(3)
-+#define RAMIPS_PST_DTX_IDX2		BIT(2)
-+#define RAMIPS_PST_DTX_IDX1		BIT(1)
-+#define RAMIPS_PST_DTX_IDX0		BIT(0)
-+
-+#define RAMIPS_TX_WB_DDONE		BIT(6)
-+#define RAMIPS_RX_DMA_BUSY		BIT(3)
-+#define RAMIPS_TX_DMA_BUSY		BIT(1)
-+#define RAMIPS_RX_DMA_EN		BIT(2)
-+#define RAMIPS_TX_DMA_EN		BIT(0)
-+
-+#define RAMIPS_PDMA_SIZE_4DWORDS	(0 << 4)
-+#define RAMIPS_PDMA_SIZE_8DWORDS	(1 << 4)
-+#define RAMIPS_PDMA_SIZE_16DWORDS	(2 << 4)
-+
-+#define RAMIPS_US_CYC_CNT_MASK		0xff
-+#define RAMIPS_US_CYC_CNT_SHIFT		0x8
-+#define RAMIPS_US_CYC_CNT_DIVISOR	1000000
-+
-+#define RX_DMA_PLEN0(_x)		(((_x) >> 16) & 0x3fff)
-+#define RX_DMA_LSO			BIT(30)
-+#define RX_DMA_DONE			BIT(31)
-+
-+struct ramips_rx_dma {
-+	unsigned int rxd1;
-+	unsigned int rxd2;
-+	unsigned int rxd3;
-+	unsigned int rxd4;
-+} __packed __aligned(4);
-+
-+#define TX_DMA_PLEN0_MASK		((0x3fff) << 16)
-+#define TX_DMA_PLEN0(_x)		(((_x) & 0x3fff) << 16)
-+#define TX_DMA_LSO			BIT(30)
-+#define TX_DMA_DONE			BIT(31)
-+#define TX_DMA_QN(_x)			((_x) << 16)
-+#define TX_DMA_PN(_x)			((_x) << 24)
-+#define TX_DMA_QN_MASK			TX_DMA_QN(0x7)
-+#define TX_DMA_PN_MASK			TX_DMA_PN(0x7)
-+
-+struct ramips_tx_dma {
-+	unsigned int txd1;
-+	unsigned int txd2;
-+	unsigned int txd3;
-+	unsigned int txd4;
-+} __packed __aligned(4);
-+
-+struct raeth_tx_info {
-+	struct ramips_tx_dma	*tx_desc;
-+	struct sk_buff		*tx_skb;
-+};
-+
-+struct raeth_rx_info {
-+	struct ramips_rx_dma	*rx_desc;
-+	struct sk_buff		*rx_skb;
-+	dma_addr_t		rx_dma;
-+	unsigned int		pad;
-+};
-+
-+struct raeth_int_stats {
-+	unsigned long		rx_delayed;
-+	unsigned long		tx_delayed;
-+	unsigned long		rx_done0;
-+	unsigned long		tx_done0;
-+	unsigned long		tx_done1;
-+	unsigned long		tx_done2;
-+	unsigned long		tx_done3;
-+	unsigned long		rx_coherent;
-+	unsigned long		tx_coherent;
-+
-+	unsigned long		pse_fq_empty;
-+	unsigned long		pse_p0_fc;
-+	unsigned long		pse_p1_fc;
-+	unsigned long		pse_p2_fc;
-+	unsigned long		pse_buf_drop;
-+
-+	unsigned long		total;
-+};
-+
-+struct raeth_debug {
-+	struct dentry		*debugfs_dir;
-+
-+	struct raeth_int_stats	int_stats;
-+};
-+
-+struct raeth_priv
-+{
-+	struct device_node	*of_node;
-+
-+	struct raeth_rx_info	*rx_info;
-+	dma_addr_t		rx_desc_dma;
-+	struct tasklet_struct	rx_tasklet;
-+	struct ramips_rx_dma	*rx;
-+
-+	struct raeth_tx_info	*tx_info;
-+	dma_addr_t		tx_desc_dma;
-+	struct tasklet_struct	tx_housekeeping_tasklet;
-+	struct ramips_tx_dma	*tx;
-+
-+	unsigned int		skb_free_idx;
-+
-+	spinlock_t		page_lock;
-+	struct net_device	*netdev;
-+	struct device		*parent;
-+
-+	int			link;
-+	int			speed;
-+	int			duplex;
-+	int			tx_fc;
-+	int			rx_fc;
-+
-+	struct mii_bus		*mii_bus;
-+	int			mii_irq[PHY_MAX_ADDR];
-+	struct phy_device	*phy_dev;
-+	spinlock_t		phy_lock;
-+	unsigned long		sys_freq;
-+
-+	unsigned char		mac[6];
-+	void			(*reset_fe)(void);
-+	int			min_pkt_len;
-+
-+	u32			phy_mask;
-+	phy_interface_t		phy_if_mode;
-+
-+#ifdef CONFIG_NET_RAMIPS_DEBUG_FS
-+	struct raeth_debug	debug;
-+#endif
-+};
-+
-+struct ramips_soc_data
-+{
-+	unsigned char mac[6];
-+	void (*reset_fe)(void);
-+	int min_pkt_len;
-+};
-+
-+
-+#ifdef CONFIG_NET_RAMIPS_DEBUG_FS
-+int raeth_debugfs_root_init(void);
-+void raeth_debugfs_root_exit(void);
-+int raeth_debugfs_init(struct raeth_priv *re);
-+void raeth_debugfs_exit(struct raeth_priv *re);
-+void raeth_debugfs_update_int_stats(struct raeth_priv *re, u32 status);
-+#else
-+static inline int raeth_debugfs_root_init(void) { return 0; }
-+static inline void raeth_debugfs_root_exit(void) {}
-+static inline int raeth_debugfs_init(struct raeth_priv *re) { return 0; }
-+static inline void raeth_debugfs_exit(struct raeth_priv *re) {}
-+static inline void raeth_debugfs_update_int_stats(struct raeth_priv *re,
-+						  u32 status) {}
-+#endif /* CONFIG_NET_RAMIPS_DEBUG_FS */
-+
-+#endif /* RAMIPS_ETH_H */
---- /dev/null
-+++ b/drivers/net/ethernet/ramips/ramips_main.c
-@@ -0,0 +1,1281 @@
-+/*
-+ *   This program is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; version 2 of the License
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ *   Copyright (C) 2009 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+
-+#include "ramips_eth.h"
-+
-+#define TX_TIMEOUT (20 * HZ / 100)
-+#define	MAX_RX_LENGTH	1600
-+
-+#ifdef CONFIG_SOC_RT305X
-+#include <rt305x.h>
-+#include "ramips_esw.c"
-+#else
-+#include <asm/mach-ralink/ralink_regs.h>
-+static inline int rt305x_esw_init(void) { return 0; }
-+static inline void rt305x_esw_exit(void) { }
-+static inline int soc_is_rt5350(void) { return 0; }
-+#endif
-+
-+#define phys_to_bus(a)  (a & 0x1FFFFFFF)
-+
-+#ifdef CONFIG_NET_RAMIPS_DEBUG
-+#define RADEBUG(fmt, args...)	printk(KERN_DEBUG fmt, ## args)
-+#else
-+#define RADEBUG(fmt, args...)	do {} while (0)
-+#endif
-+
-+#define RX_DLY_INT ((soc_is_rt5350())?(RT5350_RX_DLY_INT):(RAMIPS_RX_DLY_INT))
-+#define TX_DLY_INT ((soc_is_rt5350())?(RT5350_TX_DLY_INT):(RAMIPS_TX_DLY_INT))
-+
-+enum raeth_reg {
-+	RAETH_REG_PDMA_GLO_CFG = 0,
-+	RAETH_REG_PDMA_RST_CFG,
-+	RAETH_REG_DLY_INT_CFG,
-+	RAETH_REG_TX_BASE_PTR0,
-+	RAETH_REG_TX_MAX_CNT0,
-+	RAETH_REG_TX_CTX_IDX0,
-+	RAETH_REG_RX_BASE_PTR0,
-+	RAETH_REG_RX_MAX_CNT0,
-+	RAETH_REG_RX_CALC_IDX0,
-+	RAETH_REG_FE_INT_ENABLE,
-+	RAETH_REG_FE_INT_STATUS,
-+	RAETH_REG_COUNT
-+};
-+
-+static const u32 ramips_reg_table[RAETH_REG_COUNT] = {
-+	[RAETH_REG_PDMA_GLO_CFG] = RAMIPS_PDMA_GLO_CFG,
-+	[RAETH_REG_PDMA_RST_CFG] = RAMIPS_PDMA_RST_CFG,
-+	[RAETH_REG_DLY_INT_CFG] = RAMIPS_DLY_INT_CFG,
-+	[RAETH_REG_TX_BASE_PTR0] = RAMIPS_TX_BASE_PTR0,
-+	[RAETH_REG_TX_MAX_CNT0] = RAMIPS_TX_MAX_CNT0,
-+	[RAETH_REG_TX_CTX_IDX0] = RAMIPS_TX_CTX_IDX0,
-+	[RAETH_REG_RX_BASE_PTR0] = RAMIPS_RX_BASE_PTR0,
-+	[RAETH_REG_RX_MAX_CNT0] = RAMIPS_RX_MAX_CNT0,
-+	[RAETH_REG_RX_CALC_IDX0] = RAMIPS_RX_CALC_IDX0,
-+	[RAETH_REG_FE_INT_ENABLE] = RAMIPS_FE_INT_ENABLE,
-+	[RAETH_REG_FE_INT_STATUS] = RAMIPS_FE_INT_STATUS,
-+};
-+
-+static const u32 rt5350_reg_table[RAETH_REG_COUNT] = {
-+	[RAETH_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
-+	[RAETH_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
-+	[RAETH_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
-+	[RAETH_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
-+	[RAETH_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
-+	[RAETH_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
-+	[RAETH_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
-+	[RAETH_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
-+	[RAETH_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
-+	[RAETH_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
-+	[RAETH_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
-+};
-+
-+static struct net_device * ramips_dev;
-+static void __iomem *ramips_fe_base = 0;
-+
-+static inline u32 get_reg_offset(enum raeth_reg reg)
-+{
-+	const u32 *table;
-+
-+	if (soc_is_rt5350())
-+		table = rt5350_reg_table;
-+	else
-+		table = ramips_reg_table;
-+
-+	return table[reg];
-+}
-+
-+static inline void
-+ramips_fe_wr(u32 val, unsigned reg)
-+{
-+	__raw_writel(val, ramips_fe_base + reg);
-+}
-+
-+static inline u32
-+ramips_fe_rr(unsigned reg)
-+{
-+	return __raw_readl(ramips_fe_base + reg);
-+}
-+
-+static inline void
-+ramips_fe_twr(u32 val, enum raeth_reg reg)
-+{
-+	ramips_fe_wr(val, get_reg_offset(reg));
-+}
-+
-+static inline u32
-+ramips_fe_trr(enum raeth_reg reg)
-+{
-+	return ramips_fe_rr(get_reg_offset(reg));
-+}
-+
-+static inline void
-+ramips_fe_int_disable(u32 mask)
-+{
-+	ramips_fe_twr(ramips_fe_trr(RAETH_REG_FE_INT_ENABLE) & ~mask,
-+		     RAETH_REG_FE_INT_ENABLE);
-+	/* flush write */
-+	ramips_fe_trr(RAETH_REG_FE_INT_ENABLE);
-+}
-+
-+static inline void
-+ramips_fe_int_enable(u32 mask)
-+{
-+	ramips_fe_twr(ramips_fe_trr(RAETH_REG_FE_INT_ENABLE) | mask,
-+		     RAETH_REG_FE_INT_ENABLE);
-+	/* flush write */
-+	ramips_fe_trr(RAETH_REG_FE_INT_ENABLE);
-+}
-+
-+static inline void
-+ramips_hw_set_macaddr(unsigned char *mac)
-+{
-+	if (soc_is_rt5350()) {
-+		ramips_fe_wr((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH);
-+		ramips_fe_wr((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-+			     RT5350_SDM_MAC_ADRL);
-+	} else {
-+		ramips_fe_wr((mac[0] << 8) | mac[1], RAMIPS_GDMA1_MAC_ADRH);
-+		ramips_fe_wr((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-+			     RAMIPS_GDMA1_MAC_ADRL);
-+	}
-+}
-+
-+static struct sk_buff *
-+ramips_alloc_skb(struct raeth_priv *re)
-+{
-+	struct sk_buff *skb;
-+
-+	skb = netdev_alloc_skb(re->netdev, MAX_RX_LENGTH + NET_IP_ALIGN);
-+	if (!skb)
-+		return NULL;
-+
-+	skb_reserve(skb, NET_IP_ALIGN);
-+
-+	return skb;
-+}
-+
-+static void
-+ramips_ring_setup(struct raeth_priv *re)
-+{
-+	int len;
-+	int i;
-+
-+	memset(re->tx_info, 0, NUM_TX_DESC * sizeof(struct raeth_tx_info));
-+
-+	len = NUM_TX_DESC * sizeof(struct ramips_tx_dma);
-+	memset(re->tx, 0, len);
-+
-+	for (i = 0; i < NUM_TX_DESC; i++) {
-+		struct raeth_tx_info *txi;
-+		struct ramips_tx_dma *txd;
-+
-+		txd = &re->tx[i];
-+		txd->txd4 = TX_DMA_QN(3) | TX_DMA_PN(1);
-+		txd->txd2 = TX_DMA_LSO | TX_DMA_DONE;
-+
-+		txi = &re->tx_info[i];
-+		txi->tx_desc = txd;
-+		if (txi->tx_skb != NULL) {
-+			netdev_warn(re->netdev,
-+				    "dirty skb for TX desc %d\n", i);
-+			txi->tx_skb = NULL;
-+		}
-+	}
-+
-+	len = NUM_RX_DESC * sizeof(struct ramips_rx_dma);
-+	memset(re->rx, 0, len);
-+
-+	for (i = 0; i < NUM_RX_DESC; i++) {
-+		struct raeth_rx_info *rxi;
-+		struct ramips_rx_dma *rxd;
-+		dma_addr_t dma_addr;
-+
-+		rxd = &re->rx[i];
-+		rxi = &re->rx_info[i];
-+		BUG_ON(rxi->rx_skb == NULL);
-+		dma_addr = dma_map_single(&re->netdev->dev, rxi->rx_skb->data,
-+					  MAX_RX_LENGTH, DMA_FROM_DEVICE);
-+		rxi->rx_dma = dma_addr;
-+		rxi->rx_desc = rxd;
-+
-+		rxd->rxd1 = (unsigned int) dma_addr;
-+		rxd->rxd2 = RX_DMA_LSO;
-+	}
-+
-+	/* flush descriptors */
-+	wmb();
-+}
-+
-+static void
-+ramips_ring_cleanup(struct raeth_priv *re)
-+{
-+	int i;
-+
-+	for (i = 0; i < NUM_RX_DESC; i++) {
-+		struct raeth_rx_info *rxi;
-+
-+		rxi = &re->rx_info[i];
-+		if (rxi->rx_skb)
-+			dma_unmap_single(&re->netdev->dev, rxi->rx_dma,
-+					 MAX_RX_LENGTH, DMA_FROM_DEVICE);
-+	}
-+
-+	for (i = 0; i < NUM_TX_DESC; i++) {
-+		struct raeth_tx_info *txi;
-+
-+		txi = &re->tx_info[i];
-+		if (txi->tx_skb) {
-+			dev_kfree_skb_any(txi->tx_skb);
-+			txi->tx_skb = NULL;
-+		}
-+	}
-+
-+	netdev_reset_queue(re->netdev);
-+}
-+
-+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT3883)
-+
-+#define RAMIPS_MDIO_RETRY	1000
-+
-+static unsigned char *ramips_speed_str(struct raeth_priv *re)
-+{
-+	switch (re->speed) {
-+	case SPEED_1000:
-+		return "1000";
-+	case SPEED_100:
-+		return "100";
-+	case SPEED_10:
-+		return "10";
-+	}
-+
-+	return "?";
-+}
-+
-+static void ramips_link_adjust(struct raeth_priv *re)
-+{
-+	u32 mdio_cfg;
-+
-+	if (!re->link) {
-+		netif_carrier_off(re->netdev);
-+		netdev_info(re->netdev, "link down\n");
-+		return;
-+	}
-+
-+	mdio_cfg = RAMIPS_MDIO_CFG_TX_CLK_SKEW_200 |
-+		   RAMIPS_MDIO_CFG_RX_CLK_SKEW_200 |
-+		   RAMIPS_MDIO_CFG_GP1_FRC_EN;
-+
-+	if (re->duplex == DUPLEX_FULL)
-+		mdio_cfg |= RAMIPS_MDIO_CFG_GP1_DUPLEX;
-+
-+	if (re->tx_fc)
-+		mdio_cfg |= RAMIPS_MDIO_CFG_GP1_FC_TX;
-+
-+	if (re->rx_fc)
-+		mdio_cfg |= RAMIPS_MDIO_CFG_GP1_FC_RX;
-+
-+	switch (re->speed) {
-+	case SPEED_10:
-+		mdio_cfg |= RAMIPS_MDIO_CFG_GP1_SPEED_10;
-+		break;
-+	case SPEED_100:
-+		mdio_cfg |= RAMIPS_MDIO_CFG_GP1_SPEED_100;
-+		break;
-+	case SPEED_1000:
-+		mdio_cfg |= RAMIPS_MDIO_CFG_GP1_SPEED_1000;
-+		break;
-+	default:
-+		BUG();
-+	}
-+
-+	ramips_fe_wr(mdio_cfg, RAMIPS_MDIO_CFG);
-+
-+	netif_carrier_on(re->netdev);
-+	netdev_info(re->netdev, "link up (%sMbps/%s duplex)\n",
-+		    ramips_speed_str(re),
-+		    (DUPLEX_FULL == re->duplex) ? "Full" : "Half");
-+}
-+
-+static int
-+ramips_mdio_wait_ready(struct raeth_priv *re)
-+{
-+	int retries;
-+
-+	retries = RAMIPS_MDIO_RETRY;
-+	while (1) {
-+		u32 t;
-+
-+		t = ramips_fe_rr(RAMIPS_MDIO_ACCESS);
-+		if ((t & (0x1 << 31)) == 0)
-+			return 0;
-+
-+		if (retries-- == 0)
-+			break;
-+
-+		udelay(1);
-+	}
-+
-+	dev_err(re->parent, "MDIO operation timed out\n");
-+	return -ETIMEDOUT;
-+}
-+
-+static int
-+ramips_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+	struct raeth_priv *re = bus->priv;
-+	int err;
-+	u32 t;
-+
-+	err = ramips_mdio_wait_ready(re);
-+	if (err)
-+		return 0xffff;
-+
-+	t = (phy_addr << 24) | (phy_reg << 16);
-+	ramips_fe_wr(t, RAMIPS_MDIO_ACCESS);
-+	t |= (1 << 31);
-+	ramips_fe_wr(t, RAMIPS_MDIO_ACCESS);
-+
-+	err = ramips_mdio_wait_ready(re);
-+	if (err)
-+		return 0xffff;
-+
-+	RADEBUG("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
-+		phy_addr, phy_reg, ramips_fe_rr(RAMIPS_MDIO_ACCESS) & 0xffff);
-+
-+	return ramips_fe_rr(RAMIPS_MDIO_ACCESS) & 0xffff;
-+}
-+
-+static int
-+ramips_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
-+{
-+	struct raeth_priv *re = bus->priv;
-+	int err;
-+	u32 t;
-+
-+	RADEBUG("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
-+		phy_addr, phy_reg, ramips_fe_rr(RAMIPS_MDIO_ACCESS) & 0xffff);
-+
-+	err = ramips_mdio_wait_ready(re);
-+	if (err)
-+		return err;
-+
-+	t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val;
-+	ramips_fe_wr(t, RAMIPS_MDIO_ACCESS);
-+	t |= (1 << 31);
-+	ramips_fe_wr(t, RAMIPS_MDIO_ACCESS);
-+
-+	return ramips_mdio_wait_ready(re);
-+}
-+
-+static int
-+ramips_mdio_reset(struct mii_bus *bus)
-+{
-+	/* TODO */
-+	return 0;
-+}
-+
-+static int
-+ramips_mdio_init(struct raeth_priv *re)
-+{
-+	struct device_node *mii_np;
-+	int err;
-+
-+	mii_np = of_get_child_by_name(re->of_node, "mdio-bus");
-+	if (!mii_np) {
-+		dev_err(re->parent, "no %s child node found", "mdio-bus");
-+		return -ENODEV;
-+	}
-+
-+	if (!of_device_is_available(mii_np)) {
-+		err = 0;
-+		goto err_put_node;
-+	}
-+
-+	re->mii_bus = mdiobus_alloc();
-+	if (re->mii_bus == NULL) {
-+		err = -ENOMEM;
-+		goto err_put_node;
-+	}
-+
-+	re->mii_bus->name = "ramips_mdio";
-+	re->mii_bus->read = ramips_mdio_read;
-+	re->mii_bus->write = ramips_mdio_write;
-+	re->mii_bus->reset = ramips_mdio_reset;
-+	re->mii_bus->irq = re->mii_irq;
-+	re->mii_bus->priv = re;
-+	re->mii_bus->parent = re->parent;
-+
-+	snprintf(re->mii_bus->id, MII_BUS_ID_SIZE, "%s", "ramips_mdio");
-+	err = of_mdiobus_register(re->mii_bus, mii_np);
-+	if (err)
-+		goto err_free_bus;
-+
-+	return 0;
-+
-+err_free_bus:
-+	kfree(re->mii_bus);
-+err_put_node:
-+	of_node_put(mii_np);
-+	re->mii_bus = NULL;
-+	return err;
-+}
-+
-+static void
-+ramips_mdio_cleanup(struct raeth_priv *re)
-+{
-+	if (!re->mii_bus)
-+		return;
-+
-+	mdiobus_unregister(re->mii_bus);
-+	of_node_put(re->mii_bus->dev.of_node);
-+	kfree(re->mii_bus);
-+}
-+
-+static void
-+ramips_phy_link_adjust(struct net_device *dev)
-+{
-+	struct raeth_priv *re = netdev_priv(dev);
-+	struct phy_device *phydev = re->phy_dev;
-+	unsigned long flags;
-+	int status_change = 0;
-+
-+	spin_lock_irqsave(&re->phy_lock, flags);
-+
-+	if (phydev->link)
-+		if (re->duplex != phydev->duplex ||
-+		    re->speed != phydev->speed)
-+			status_change = 1;
-+
-+	if (phydev->link != re->link)
-+		status_change = 1;
-+
-+	re->link = phydev->link;
-+	re->duplex = phydev->duplex;
-+	re->speed = phydev->speed;
-+
-+	if (status_change)
-+		ramips_link_adjust(re);
-+
-+	spin_unlock_irqrestore(&re->phy_lock, flags);
-+}
-+
-+static int
-+ramips_phy_connect_by_node(struct raeth_priv *re, struct device_node *phy_node)
-+{
-+	struct phy_device *phydev;
-+	int phy_mode;
-+
-+	phy_mode = of_get_phy_mode(re->of_node);
-+	if (phy_mode < 0) {
-+		dev_err(re->parent, "incorrect phy-mode\n");
-+		return -EINVAL;
-+	}
-+
-+	phydev = of_phy_connect(re->netdev, phy_node, ramips_phy_link_adjust,
-+				0, phy_mode);
-+	if (IS_ERR(phydev)) {
-+		dev_err(re->parent, "could not connect to PHY\n");
-+		return PTR_ERR(re->phy_dev);
-+	}
-+
-+	phydev->supported &= PHY_GBIT_FEATURES;
-+	phydev->advertising = phydev->supported;
-+
-+	dev_info(re->parent,
-+		 "connected to PHY at %s [uid=%08x, driver=%s]\n",
-+		 dev_name(&phydev->dev), phydev->phy_id,
-+		 phydev->drv->name);
-+
-+	re->phy_dev = phydev;
-+	re->link = 0;
-+	re->speed = 0;
-+	re->duplex = -1;
-+	re->rx_fc = 0;
-+	re->tx_fc = 0;
-+
-+	return 0;
-+}
-+
-+static int
-+ramips_phy_connect_fixed(struct raeth_priv *re, const __be32 *link, int size)
-+{
-+	if (size != (4 * sizeof(*link))) {
-+		dev_err(re->parent, "invalid fixed-link property\n");
-+		return -EINVAL;
-+	}
-+
-+	re->speed = be32_to_cpup(link++);
-+	re->duplex = be32_to_cpup(link++);
-+	re->tx_fc = be32_to_cpup(link++);
-+	re->rx_fc = be32_to_cpup(link++);
-+
-+	switch (re->speed) {
-+	case SPEED_10:
-+	case SPEED_100:
-+	case SPEED_1000:
-+		break;
-+	default:
-+		dev_err(re->parent, "invalid link speed: %d\n", re->speed);
-+		return -EINVAL;
-+	}
-+
-+	dev_info(re->parent, "using fixed link parameters\n");
-+	return 0;
-+}
-+
-+static int
-+ramips_phy_connect(struct raeth_priv *re)
-+{
-+	struct device_node *phy_node;
-+	const __be32 *p32;
-+	int size;
-+
-+	phy_node = of_parse_phandle(re->of_node, "phy-handle", 0);
-+	if (phy_node)
-+		return ramips_phy_connect_by_node(re, phy_node);
-+
-+	p32 = of_get_property(re->of_node, "ralink,fixed-link", &size);
-+	if (p32)
-+		return ramips_phy_connect_fixed(re, p32, size);
-+
-+	dev_err(re->parent, "unable to get connection type\n");
-+	return -EINVAL;
-+}
-+
-+static void
-+ramips_phy_disconnect(struct raeth_priv *re)
-+{
-+	if (re->phy_dev)
-+		phy_disconnect(re->phy_dev);
-+}
-+
-+static void
-+ramips_phy_start(struct raeth_priv *re)
-+{
-+	unsigned long flags;
-+
-+	if (re->phy_dev) {
-+		phy_start(re->phy_dev);
-+	} else {
-+		spin_lock_irqsave(&re->phy_lock, flags);
-+		re->link = 1;
-+		ramips_link_adjust(re);
-+		spin_unlock_irqrestore(&re->phy_lock, flags);
-+	}
-+}
-+
-+static void
-+ramips_phy_stop(struct raeth_priv *re)
-+{
-+	unsigned long flags;
-+
-+	if (re->phy_dev)
-+		phy_stop(re->phy_dev);
-+
-+	spin_lock_irqsave(&re->phy_lock, flags);
-+	re->link = 0;
-+	ramips_link_adjust(re);
-+	spin_unlock_irqrestore(&re->phy_lock, flags);
-+}
-+#else
-+static inline int
-+ramips_mdio_init(struct raeth_priv *re)
-+{
-+	return 0;
-+}
-+
-+static inline void
-+ramips_mdio_cleanup(struct raeth_priv *re)
-+{
-+}
-+
-+static inline int
-+ramips_phy_connect(struct raeth_priv *re)
-+{
-+	return 0;
-+}
-+
-+static inline void
-+ramips_phy_disconnect(struct raeth_priv *re)
-+{
-+}
-+
-+static inline void
-+ramips_phy_start(struct raeth_priv *re)
-+{
-+}
-+
-+static inline void
-+ramips_phy_stop(struct raeth_priv *re)
-+{
-+}
-+#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT3883 */
-+
-+static void
-+ramips_ring_free(struct raeth_priv *re)
-+{
-+	int len;
-+	int i;
-+
-+	if (re->rx_info) {
-+		for (i = 0; i < NUM_RX_DESC; i++) {
-+			struct raeth_rx_info *rxi;
-+
-+			rxi = &re->rx_info[i];
-+			if (rxi->rx_skb)
-+				dev_kfree_skb_any(rxi->rx_skb);
-+		}
-+		kfree(re->rx_info);
-+	}
-+
-+	if (re->rx) {
-+		len = NUM_RX_DESC * sizeof(struct ramips_rx_dma);
-+		dma_free_coherent(&re->netdev->dev, len, re->rx,
-+				  re->rx_desc_dma);
-+	}
-+
-+	if (re->tx) {
-+		len = NUM_TX_DESC * sizeof(struct ramips_tx_dma);
-+		dma_free_coherent(&re->netdev->dev, len, re->tx,
-+				  re->tx_desc_dma);
-+	}
-+
-+	kfree(re->tx_info);
-+}
-+
-+static int
-+ramips_ring_alloc(struct raeth_priv *re)
-+{
-+	int len;
-+	int err = -ENOMEM;
-+	int i;
-+
-+	re->tx_info = kzalloc(NUM_TX_DESC * sizeof(struct raeth_tx_info),
-+			      GFP_ATOMIC);
-+	if (!re->tx_info)
-+		goto err_cleanup;
-+
-+	re->rx_info = kzalloc(NUM_RX_DESC * sizeof(struct raeth_rx_info),
-+			      GFP_ATOMIC);
-+	if (!re->rx_info)
-+		goto err_cleanup;
-+
-+	/* allocate tx ring */
-+	len = NUM_TX_DESC * sizeof(struct ramips_tx_dma);
-+	re->tx = dma_alloc_coherent(&re->netdev->dev, len,
-+					  &re->tx_desc_dma, GFP_ATOMIC);
-+	if (!re->tx)
-+		goto err_cleanup;
-+
-+	/* allocate rx ring */
-+	len = NUM_RX_DESC * sizeof(struct ramips_rx_dma);
-+	re->rx = dma_alloc_coherent(&re->netdev->dev, len,
-+				    &re->rx_desc_dma, GFP_ATOMIC);
-+	if (!re->rx)
-+		goto err_cleanup;
-+
-+	for (i = 0; i < NUM_RX_DESC; i++) {
-+		struct sk_buff *skb;
-+
-+		skb = ramips_alloc_skb(re);
-+		if (!skb)
-+			goto err_cleanup;
-+
-+		re->rx_info[i].rx_skb = skb;
-+	}
-+
-+	return 0;
-+
-+err_cleanup:
-+	ramips_ring_free(re);
-+	return err;
-+}
-+
-+static void
-+ramips_setup_dma(struct raeth_priv *re)
-+{
-+	ramips_fe_twr(re->tx_desc_dma, RAETH_REG_TX_BASE_PTR0);
-+	ramips_fe_twr(NUM_TX_DESC, RAETH_REG_TX_MAX_CNT0);
-+	ramips_fe_twr(0, RAETH_REG_TX_CTX_IDX0);
-+	ramips_fe_twr(RAMIPS_PST_DTX_IDX0, RAETH_REG_PDMA_RST_CFG);
-+
-+	ramips_fe_twr(re->rx_desc_dma, RAETH_REG_RX_BASE_PTR0);
-+	ramips_fe_twr(NUM_RX_DESC, RAETH_REG_RX_MAX_CNT0);
-+	ramips_fe_twr((NUM_RX_DESC - 1), RAETH_REG_RX_CALC_IDX0);
-+	ramips_fe_twr(RAMIPS_PST_DRX_IDX0, RAETH_REG_PDMA_RST_CFG);
-+}
-+
-+static int
-+ramips_eth_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct raeth_priv *re = netdev_priv(dev);
-+	struct raeth_tx_info *txi, *txi_next;
-+	struct ramips_tx_dma *txd, *txd_next;
-+	unsigned long tx;
-+	unsigned int tx_next;
-+	dma_addr_t mapped_addr;
-+
-+	if (re->min_pkt_len) {
-+		if (skb->len < re->min_pkt_len) {
-+			if (skb_padto(skb, re->min_pkt_len)) {
-+				printk(KERN_ERR
-+				       "ramips_eth: skb_padto failed\n");
-+				kfree_skb(skb);
-+				return 0;
-+			}
-+			skb_put(skb, re->min_pkt_len - skb->len);
-+		}
-+	}
-+
-+	dev->trans_start = jiffies;
-+	mapped_addr = dma_map_single(&re->netdev->dev, skb->data, skb->len,
-+				     DMA_TO_DEVICE);
-+
-+	spin_lock(&re->page_lock);
-+	tx = ramips_fe_trr(RAETH_REG_TX_CTX_IDX0);
-+	tx_next = (tx + 1) % NUM_TX_DESC;
-+
-+	txi = &re->tx_info[tx];
-+	txd = txi->tx_desc;
-+	txi_next = &re->tx_info[tx_next];
-+	txd_next = txi_next->tx_desc;
-+
-+	if ((txi->tx_skb) || (txi_next->tx_skb) ||
-+	    !(txd->txd2 & TX_DMA_DONE) ||
-+	    !(txd_next->txd2 & TX_DMA_DONE))
-+		goto out;
-+
-+	txi->tx_skb = skb;
-+
-+	txd->txd1 = (unsigned int) mapped_addr;
-+	wmb();
-+	txd->txd2 = TX_DMA_LSO | TX_DMA_PLEN0(skb->len);
-+	dev->stats.tx_packets++;
-+	dev->stats.tx_bytes += skb->len;
-+	ramips_fe_twr(tx_next, RAETH_REG_TX_CTX_IDX0);
-+	netdev_sent_queue(dev, skb->len);
-+	spin_unlock(&re->page_lock);
-+	return NETDEV_TX_OK;
-+
-+ out:
-+	spin_unlock(&re->page_lock);
-+	dev->stats.tx_dropped++;
-+	kfree_skb(skb);
-+	return NETDEV_TX_OK;
-+}
-+
-+static void
-+ramips_eth_rx_hw(unsigned long ptr)
-+{
-+	struct net_device *dev = (struct net_device *) ptr;
-+	struct raeth_priv *re = netdev_priv(dev);
-+	int rx;
-+	int max_rx = 16;
-+
-+	rx = ramips_fe_trr(RAETH_REG_RX_CALC_IDX0);
-+
-+	while (max_rx) {
-+		struct raeth_rx_info *rxi;
-+		struct ramips_rx_dma *rxd;
-+		struct sk_buff *rx_skb, *new_skb;
-+		int pktlen;
-+
-+		rx = (rx + 1) % NUM_RX_DESC;
-+
-+		rxi = &re->rx_info[rx];
-+		rxd = rxi->rx_desc;
-+		if (!(rxd->rxd2 & RX_DMA_DONE))
-+			break;
-+
-+		rx_skb = rxi->rx_skb;
-+		pktlen = RX_DMA_PLEN0(rxd->rxd2);
-+
-+		new_skb = ramips_alloc_skb(re);
-+		/* Reuse the buffer on allocation failures */
-+		if (new_skb) {
-+			dma_addr_t dma_addr;
-+
-+			dma_unmap_single(&re->netdev->dev, rxi->rx_dma,
-+					 MAX_RX_LENGTH, DMA_FROM_DEVICE);
-+
-+			skb_put(rx_skb, pktlen);
-+			rx_skb->dev = dev;
-+			rx_skb->protocol = eth_type_trans(rx_skb, dev);
-+			rx_skb->ip_summed = CHECKSUM_NONE;
-+			dev->stats.rx_packets++;
-+			dev->stats.rx_bytes += pktlen;
-+			netif_rx(rx_skb);
-+
-+			rxi->rx_skb = new_skb;
-+
-+			dma_addr = dma_map_single(&re->netdev->dev,
-+						  new_skb->data,
-+						  MAX_RX_LENGTH,
-+						  DMA_FROM_DEVICE);
-+			rxi->rx_dma = dma_addr;
-+			rxd->rxd1 = (unsigned int) dma_addr;
-+			wmb();
-+		} else {
-+			dev->stats.rx_dropped++;
-+		}
-+
-+		rxd->rxd2 = RX_DMA_LSO;
-+		ramips_fe_twr(rx, RAETH_REG_RX_CALC_IDX0);
-+		max_rx--;
-+	}
-+
-+	if (max_rx == 0)
-+		tasklet_schedule(&re->rx_tasklet);
-+	else
-+		ramips_fe_int_enable(RX_DLY_INT);
-+}
-+
-+static void
-+ramips_eth_tx_housekeeping(unsigned long ptr)
-+{
-+	struct net_device *dev = (struct net_device*)ptr;
-+	struct raeth_priv *re = netdev_priv(dev);
-+	unsigned int bytes_compl = 0, pkts_compl = 0;
-+
-+	spin_lock(&re->page_lock);
-+	while (1) {
-+		struct raeth_tx_info *txi;
-+		struct ramips_tx_dma *txd;
-+
-+		txi = &re->tx_info[re->skb_free_idx];
-+		txd = txi->tx_desc;
-+
-+		if (!(txd->txd2 & TX_DMA_DONE) || !(txi->tx_skb))
-+			break;
-+
-+		pkts_compl++;
-+		bytes_compl += txi->tx_skb->len;
-+
-+		dev_kfree_skb_irq(txi->tx_skb);
-+		txi->tx_skb = NULL;
-+		re->skb_free_idx++;
-+		if (re->skb_free_idx >= NUM_TX_DESC)
-+			re->skb_free_idx = 0;
-+	}
-+	netdev_completed_queue(dev, pkts_compl, bytes_compl);
-+	spin_unlock(&re->page_lock);
-+
-+	ramips_fe_int_enable(TX_DLY_INT);
-+}
-+
-+static void
-+ramips_eth_timeout(struct net_device *dev)
-+{
-+	struct raeth_priv *re = netdev_priv(dev);
-+
-+	tasklet_schedule(&re->tx_housekeeping_tasklet);
-+}
-+
-+static irqreturn_t
-+ramips_eth_irq(int irq, void *dev)
-+{
-+	struct raeth_priv *re = netdev_priv(dev);
-+	unsigned int status;
-+
-+	status = ramips_fe_trr(RAETH_REG_FE_INT_STATUS);
-+	status &= ramips_fe_trr(RAETH_REG_FE_INT_ENABLE);
-+
-+	if (!status)
-+		return IRQ_NONE;
-+
-+	ramips_fe_twr(status, RAETH_REG_FE_INT_STATUS);
-+
-+	if (status & RX_DLY_INT) {
-+		ramips_fe_int_disable(RX_DLY_INT);
-+		tasklet_schedule(&re->rx_tasklet);
-+	}
-+
-+	if (status & TX_DLY_INT) {
-+		ramips_fe_int_disable(TX_DLY_INT);
-+		tasklet_schedule(&re->tx_housekeeping_tasklet);
-+	}
-+
-+	raeth_debugfs_update_int_stats(re, status);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int
-+ramips_eth_hw_init(struct net_device *dev)
-+{
-+	struct raeth_priv *re = netdev_priv(dev);
-+	int err;
-+
-+	err = request_irq(dev->irq, ramips_eth_irq, IRQF_DISABLED,
-+			  dev_name(re->parent), dev);
-+	if (err)
-+		return err;
-+
-+	err = ramips_ring_alloc(re);
-+	if (err)
-+		goto err_free_irq;
-+
-+	ramips_ring_setup(re);
-+	ramips_hw_set_macaddr(dev->dev_addr);
-+
-+	ramips_setup_dma(re);
-+	ramips_fe_wr((ramips_fe_rr(RAMIPS_FE_GLO_CFG) &
-+		~(RAMIPS_US_CYC_CNT_MASK << RAMIPS_US_CYC_CNT_SHIFT)) |
-+		((re->sys_freq / RAMIPS_US_CYC_CNT_DIVISOR) << RAMIPS_US_CYC_CNT_SHIFT),
-+		RAMIPS_FE_GLO_CFG);
-+
-+	tasklet_init(&re->tx_housekeeping_tasklet, ramips_eth_tx_housekeeping,
-+		     (unsigned long)dev);
-+	tasklet_init(&re->rx_tasklet, ramips_eth_rx_hw, (unsigned long)dev);
-+
-+
-+	ramips_fe_twr(RAMIPS_DELAY_INIT, RAETH_REG_DLY_INT_CFG);
-+	ramips_fe_twr(TX_DLY_INT | RX_DLY_INT, RAETH_REG_FE_INT_ENABLE);
-+	if (soc_is_rt5350()) {
-+		ramips_fe_wr(ramips_fe_rr(RT5350_SDM_CFG) &
-+			~(RT5350_SDM_ICS_EN | RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN | 0xffff),
-+			RT5350_SDM_CFG);
-+	} else {
-+		ramips_fe_wr(ramips_fe_rr(RAMIPS_GDMA1_FWD_CFG) &
-+			~(RAMIPS_GDM1_ICS_EN | RAMIPS_GDM1_TCS_EN | RAMIPS_GDM1_UCS_EN | 0xffff),
-+			RAMIPS_GDMA1_FWD_CFG);
-+		ramips_fe_wr(ramips_fe_rr(RAMIPS_CDMA_CSG_CFG) &
-+			~(RAMIPS_ICS_GEN_EN | RAMIPS_TCS_GEN_EN | RAMIPS_UCS_GEN_EN),
-+			RAMIPS_CDMA_CSG_CFG);
-+		ramips_fe_wr(RAMIPS_PSE_FQFC_CFG_INIT, RAMIPS_PSE_FQ_CFG);
-+	}
-+	ramips_fe_wr(1, RAMIPS_FE_RST_GL);
-+	ramips_fe_wr(0, RAMIPS_FE_RST_GL);
-+
-+	return 0;
-+
-+err_free_irq:
-+	free_irq(dev->irq, dev);
-+	return err;
-+}
-+
-+static int
-+ramips_eth_open(struct net_device *dev)
-+{
-+	struct raeth_priv *re = netdev_priv(dev);
-+
-+	ramips_fe_twr((ramips_fe_trr(RAETH_REG_PDMA_GLO_CFG) & 0xff) |
-+		(RAMIPS_TX_WB_DDONE | RAMIPS_RX_DMA_EN |
-+		RAMIPS_TX_DMA_EN | RAMIPS_PDMA_SIZE_4DWORDS),
-+		RAETH_REG_PDMA_GLO_CFG);
-+	ramips_phy_start(re);
-+	netif_start_queue(dev);
-+	return 0;
-+}
-+
-+static int
-+ramips_eth_stop(struct net_device *dev)
-+{
-+	struct raeth_priv *re = netdev_priv(dev);
-+
-+	ramips_fe_twr(ramips_fe_trr(RAETH_REG_PDMA_GLO_CFG) &
-+		     ~(RAMIPS_TX_WB_DDONE | RAMIPS_RX_DMA_EN | RAMIPS_TX_DMA_EN),
-+		     RAETH_REG_PDMA_GLO_CFG);
-+
-+	netif_stop_queue(dev);
-+	ramips_phy_stop(re);
-+	RADEBUG("ramips_eth: stopped\n");
-+	return 0;
-+}
-+
-+static int __init
-+ramips_eth_probe(struct net_device *dev)
-+{
-+	struct raeth_priv *re = netdev_priv(dev);
-+	int err;
-+
-+	BUG_ON(!re->reset_fe);
-+	re->reset_fe();
-+	net_srandom(jiffies);
-+	memcpy(dev->dev_addr, re->mac, ETH_ALEN);
-+	of_get_mac_address_mtd(re->of_node, dev->dev_addr);
-+	ether_setup(dev);
-+	dev->mtu = 1500;
-+	dev->watchdog_timeo = TX_TIMEOUT;
-+	spin_lock_init(&re->page_lock);
-+	spin_lock_init(&re->phy_lock);
-+
-+	err = ramips_mdio_init(re);
-+	if (err)
-+		return err;
-+
-+	err = ramips_phy_connect(re);
-+	if (err)
-+		goto err_mdio_cleanup;
-+
-+	err = raeth_debugfs_init(re);
-+	if (err)
-+		goto err_phy_disconnect;
-+
-+	err = ramips_eth_hw_init(dev);
-+	if (err)
-+		goto err_debugfs;
-+
-+	return 0;
-+
-+err_debugfs:
-+	raeth_debugfs_exit(re);
-+err_phy_disconnect:
-+	ramips_phy_disconnect(re);
-+err_mdio_cleanup:
-+	ramips_mdio_cleanup(re);
-+	return err;
-+}
-+
-+static void
-+ramips_eth_uninit(struct net_device *dev)
-+{
-+	struct raeth_priv *re = netdev_priv(dev);
-+
-+	raeth_debugfs_exit(re);
-+	ramips_phy_disconnect(re);
-+	ramips_mdio_cleanup(re);
-+	ramips_fe_twr(0, RAETH_REG_FE_INT_ENABLE);
-+	free_irq(dev->irq, dev);
-+	tasklet_kill(&re->tx_housekeeping_tasklet);
-+	tasklet_kill(&re->rx_tasklet);
-+	ramips_ring_cleanup(re);
-+	ramips_ring_free(re);
-+}
-+
-+static const struct net_device_ops ramips_eth_netdev_ops = {
-+	.ndo_init		= ramips_eth_probe,
-+	.ndo_uninit		= ramips_eth_uninit,
-+	.ndo_open		= ramips_eth_open,
-+	.ndo_stop		= ramips_eth_stop,
-+	.ndo_start_xmit		= ramips_eth_hard_start_xmit,
-+	.ndo_tx_timeout		= ramips_eth_timeout,
-+	.ndo_change_mtu		= eth_change_mtu,
-+	.ndo_set_mac_address	= eth_mac_addr,
-+	.ndo_validate_addr	= eth_validate_addr,
-+};
-+
-+#ifdef CONFIG_SOC_RT305X
-+static void rt305x_fe_reset(void)
-+{
-+#define RT305X_RESET_FE		BIT(21)
-+#define RT305X_RESET_ESW	BIT(23)
-+#define SYSC_REG_RESET_CTRL	0x034
-+	u32 reset_bits = RT305X_RESET_FE;
-+
-+	if (soc_is_rt5350())
-+		reset_bits |= RT305X_RESET_ESW;
-+	rt_sysc_w32(reset_bits, SYSC_REG_RESET_CTRL);
-+	rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
-+}
-+
-+struct ramips_soc_data rt3050_data = {
-+	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
-+	.reset_fe = rt305x_fe_reset,
-+	.min_pkt_len = 64,
-+};
-+
-+static const struct of_device_id ralink_eth_match[] = {
-+	{ .compatible = "ralink,rt3050-eth", .data = &rt3050_data },
-+	{},
-+};
-+#else
-+static void rt3883_fe_reset(void)
-+{
-+#define RT3883_SYSC_REG_RSTCTRL	0x34
-+#define RT3883_RSTCTRL_FE	BIT(21)
-+	u32 t;
-+
-+	t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
-+	t |= RT3883_RSTCTRL_FE;
-+	rt_sysc_w32(t , RT3883_SYSC_REG_RSTCTRL);
-+
-+	t &= ~RT3883_RSTCTRL_FE;
-+	rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
-+}
-+
-+struct ramips_soc_data rt3883_data = {
-+	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
-+	.reset_fe = rt3883_fe_reset,
-+	.min_pkt_len = 64,
-+};
-+
-+static const struct of_device_id ralink_eth_match[] = {
-+	{ .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
-+	{},
-+};
-+#endif
-+MODULE_DEVICE_TABLE(of, ralink_eth_match);
-+
-+static int
-+ramips_eth_plat_probe(struct platform_device *plat)
-+{
-+	struct raeth_priv *re;
-+	struct resource *res;
-+	struct clk *clk;
-+	int err;
-+	const struct of_device_id *match;
-+	const struct ramips_soc_data *soc = NULL;
-+
-+	match = of_match_device(ralink_eth_match, &plat->dev);
-+	if (match)
-+		soc = (const struct ramips_soc_data *) match->data;
-+
-+	if (!soc) {
-+		dev_err(&plat->dev, "no platform data specified\n");
-+		return -EINVAL;
-+	}
-+
-+	res = platform_get_resource(plat, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		dev_err(&plat->dev, "no memory resource found\n");
-+		return -ENXIO;
-+	}
-+
-+	ramips_fe_base = ioremap_nocache(res->start, res->end - res->start + 1);
-+	if (!ramips_fe_base)
-+		return -ENOMEM;
-+
-+	ramips_dev = alloc_etherdev(sizeof(struct raeth_priv));
-+	if (!ramips_dev) {
-+		dev_err(&plat->dev, "alloc_etherdev failed\n");
-+		err = -ENOMEM;
-+		goto err_unmap;
-+	}
-+
-+	strcpy(ramips_dev->name, "eth%d");
-+	ramips_dev->irq = platform_get_irq(plat, 0);
-+	if (ramips_dev->irq < 0) {
-+		dev_err(&plat->dev, "no IRQ resource found\n");
-+		err = -ENXIO;
-+		goto err_free_dev;
-+	}
-+	ramips_dev->addr_len = ETH_ALEN;
-+	ramips_dev->base_addr = (unsigned long)ramips_fe_base;
-+	ramips_dev->netdev_ops = &ramips_eth_netdev_ops;
-+
-+	re = netdev_priv(ramips_dev);
-+
-+	clk = clk_get(&plat->dev, NULL);
-+	if (IS_ERR(clk))
-+		panic("unable to get SYS clock, err=%ld", PTR_ERR(clk));
-+	re->sys_freq = clk_get_rate(clk);
-+
-+	re->netdev = ramips_dev;
-+	re->of_node = plat->dev.of_node;
-+	re->parent = &plat->dev;
-+	memcpy(re->mac, soc->mac, 6);
-+	re->reset_fe = soc->reset_fe;
-+	re->min_pkt_len = soc->min_pkt_len;
-+
-+	err = register_netdev(ramips_dev);
-+	if (err) {
-+		dev_err(&plat->dev, "error bringing up device\n");
-+		goto err_free_dev;
-+	}
-+
-+	netdev_info(ramips_dev, "done loading\n");
-+	return 0;
-+
-+ err_free_dev:
-+	kfree(ramips_dev);
-+ err_unmap:
-+	iounmap(ramips_fe_base);
-+	return err;
-+}
-+
-+static int
-+ramips_eth_plat_remove(struct platform_device *plat)
-+{
-+	unregister_netdev(ramips_dev);
-+	free_netdev(ramips_dev);
-+	RADEBUG("ramips_eth: unloaded\n");
-+	return 0;
-+}
-+
-+
-+
-+static struct platform_driver ramips_eth_driver = {
-+	.probe = ramips_eth_plat_probe,
-+	.remove = ramips_eth_plat_remove,
-+	.driver = {
-+		.name = "ramips_eth",
-+		.owner = THIS_MODULE,
-+		.of_match_table = ralink_eth_match
-+	},
-+};
-+
-+static int __init
-+ramips_eth_init(void)
-+{
-+	int ret;
-+
-+	ret = raeth_debugfs_root_init();
-+	if (ret)
-+		goto err_out;
-+
-+	ret = rt305x_esw_init();
-+	if (ret)
-+		goto err_debugfs_exit;
-+
-+	ret = platform_driver_register(&ramips_eth_driver);
-+	if (ret) {
-+		printk(KERN_ERR
-+		       "ramips_eth: Error registering platfom driver!\n");
-+		goto esw_cleanup;
-+	}
-+
-+	return 0;
-+
-+esw_cleanup:
-+	rt305x_esw_exit();
-+err_debugfs_exit:
-+	raeth_debugfs_root_exit();
-+err_out:
-+	return ret;
-+}
-+
-+static void __exit
-+ramips_eth_cleanup(void)
-+{
-+	platform_driver_unregister(&ramips_eth_driver);
-+	rt305x_esw_exit();
-+	raeth_debugfs_root_exit();
-+}
-+
-+module_init(ramips_eth_init);
-+module_exit(ramips_eth_cleanup);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("ethernet driver for ramips boards");
diff --git a/target/linux/ramips/patches-3.8/0137-watchdog-adds-ralink-wdt.patch b/target/linux/ramips/patches-3.8/0137-watchdog-adds-ralink-wdt.patch
deleted file mode 100644
index 3b7246ffdb..0000000000
--- a/target/linux/ramips/patches-3.8/0137-watchdog-adds-ralink-wdt.patch
+++ /dev/null
@@ -1,395 +0,0 @@
-From 14c1b064274d28cf88113a685c58374a515f3018 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Apr 2013 23:23:07 +0200
-Subject: [PATCH 137/137] watchdog: adds ralink wdt
-
-Adds the watchdog driver for ralink SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/watchdog/Kconfig      |    6 +
- drivers/watchdog/Makefile     |    1 +
- drivers/watchdog/ralink_wdt.c |  352 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 359 insertions(+)
- create mode 100644 drivers/watchdog/ralink_wdt.c
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1077,6 +1077,12 @@ config LANTIQ_WDT
- 	help
- 	  Hardware driver for the Lantiq SoC Watchdog Timer.
- 
-+config RALINK_WDT
-+	tristate "Ralink SoC watchdog"
-+	depends on RALINK
-+	help
-+	  Hardware driver for the Ralink SoC Watchdog Timer.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
- obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
-+obj-$(CONFIG_RALINK_WDT) += ralink_wdt.o
- 
- # PARISC Architecture
- 
---- /dev/null
-+++ b/drivers/watchdog/ralink_wdt.c
-@@ -0,0 +1,352 @@
-+/*
-+ * Ralink RT288X/RT305X built-in hardware watchdog timer
-+ *
-+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This driver was based on: drivers/watchdog/ixp4xx_wdt.c
-+ *	Author: Deepak Saxena <dsaxena@plexity.net>
-+ *	Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * which again was based on sa1100 driver,
-+ *	Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
-+ *
-+ * parts of the driver are based on Ralink's 2.6.21 BSP
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/errno.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/miscdevice.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+#include <linux/watchdog.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+
-+#define DRIVER_NAME	"ralink-wdt"
-+
-+#define RALINK_WDT_TIMEOUT		30	/* seconds */
-+#define RALINK_WDT_PRESCALE		65536
-+
-+#define TIMER_REG_TMR1LOAD		0x00
-+#define TIMER_REG_TMR1CTL		0x08
-+
-+#define TMRSTAT_TMR1RST			BIT(5)
-+
-+#define TMR1CTL_ENABLE			BIT(7)
-+#define TMR1CTL_MODE_SHIFT		4
-+#define TMR1CTL_MODE_MASK		0x3
-+#define TMR1CTL_MODE_FREE_RUNNING	0x0
-+#define TMR1CTL_MODE_PERIODIC		0x1
-+#define TMR1CTL_MODE_TIMEOUT		0x2
-+#define TMR1CTL_MODE_WDT		0x3
-+#define TMR1CTL_PRESCALE_MASK		0xf
-+#define TMR1CTL_PRESCALE_65536		0xf
-+
-+static int nowayout = WATCHDOG_NOWAYOUT;
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
-+			   "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+
-+static int ralink_wdt_timeout = RALINK_WDT_TIMEOUT;
-+module_param_named(timeout, ralink_wdt_timeout, int, 0);
-+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, 0 means use maximum "
-+			  "(default=" __MODULE_STRING(RALINK_WDT_TIMEOUT) "s)");
-+
-+static unsigned long ralink_wdt_flags;
-+
-+#define WDT_FLAGS_BUSY		0
-+#define WDT_FLAGS_EXPECT_CLOSE	1
-+
-+static struct clk *ralink_wdt_clk;
-+static unsigned long ralink_wdt_freq;
-+static int ralink_wdt_max_timeout;
-+static void __iomem *ralink_wdt_base;
-+
-+static inline void rt_wdt_w32(unsigned reg, u32 val)
-+{
-+	__raw_writel(val, ralink_wdt_base + reg);
-+}
-+
-+static inline u32 rt_wdt_r32(unsigned reg)
-+{
-+	return __raw_readl(ralink_wdt_base + reg);
-+}
-+
-+static inline void ralink_wdt_keepalive(void)
-+{
-+	rt_wdt_w32(TIMER_REG_TMR1LOAD, ralink_wdt_timeout * ralink_wdt_freq);
-+}
-+
-+static inline void ralink_wdt_enable(void)
-+{
-+	u32 t;
-+
-+	ralink_wdt_keepalive();
-+
-+	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+	t |= TMR1CTL_ENABLE;
-+	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+}
-+
-+static inline void ralink_wdt_disable(void)
-+{
-+	u32 t;
-+
-+	ralink_wdt_keepalive();
-+
-+	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+	t &= ~TMR1CTL_ENABLE;
-+	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+}
-+
-+static int ralink_wdt_set_timeout(int val)
-+{
-+	if (val < 1 || val > ralink_wdt_max_timeout) {
-+		pr_warn(DRIVER_NAME
-+			": timeout value %d must be 0 < timeout <= %d, using %d\n",
-+			val, ralink_wdt_max_timeout, ralink_wdt_timeout);
-+		return -EINVAL;
-+	}
-+
-+	ralink_wdt_timeout = val;
-+	ralink_wdt_keepalive();
-+
-+	return 0;
-+}
-+
-+static int ralink_wdt_open(struct inode *inode, struct file *file)
-+{
-+	u32 t;
-+
-+	if (test_and_set_bit(WDT_FLAGS_BUSY, &ralink_wdt_flags))
-+		return -EBUSY;
-+
-+	clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ralink_wdt_flags);
-+
-+	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+	t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT |
-+	       TMR1CTL_PRESCALE_MASK);
-+	t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT |
-+	      TMR1CTL_PRESCALE_65536);
-+	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+
-+	ralink_wdt_enable();
-+
-+	return nonseekable_open(inode, file);
-+}
-+
-+static int ralink_wdt_release(struct inode *inode, struct file *file)
-+{
-+	if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &ralink_wdt_flags))
-+		ralink_wdt_disable();
-+	else {
-+		pr_crit(DRIVER_NAME ": device closed unexpectedly, "
-+			"watchdog timer will not stop!\n");
-+		ralink_wdt_keepalive();
-+	}
-+
-+	clear_bit(WDT_FLAGS_BUSY, &ralink_wdt_flags);
-+	clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ralink_wdt_flags);
-+
-+	return 0;
-+}
-+
-+static ssize_t rt_wdt_w32ite(struct file *file, const char *data,
-+				size_t len, loff_t *ppos)
-+{
-+	if (len) {
-+		if (!nowayout) {
-+			size_t i;
-+
-+			clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ralink_wdt_flags);
-+
-+			for (i = 0; i != len; i++) {
-+				char c;
-+
-+				if (get_user(c, data + i))
-+					return -EFAULT;
-+
-+				if (c == 'V')
-+					set_bit(WDT_FLAGS_EXPECT_CLOSE,
-+						&ralink_wdt_flags);
-+			}
-+		}
-+
-+		ralink_wdt_keepalive();
-+	}
-+
-+	return len;
-+}
-+
-+static const struct watchdog_info ralink_wdt_info = {
-+	.options		= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
-+				  WDIOF_MAGICCLOSE,
-+	.firmware_version	= 0,
-+	.identity		= "RALINK watchdog",
-+};
-+
-+static long ralink_wdt_ioctl(struct file *file, unsigned int cmd,
-+			    unsigned long arg)
-+{
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = argp;
-+	int err;
-+	int t;
-+
-+	switch (cmd) {
-+	case WDIOC_GETSUPPORT:
-+		err = copy_to_user(argp, &ralink_wdt_info,
-+				   sizeof(ralink_wdt_info)) ? -EFAULT : 0;
-+		break;
-+
-+	case WDIOC_GETSTATUS:
-+		err = put_user(0, p);
-+		break;
-+
-+	case WDIOC_KEEPALIVE:
-+		ralink_wdt_keepalive();
-+		err = 0;
-+		break;
-+
-+	case WDIOC_SETTIMEOUT:
-+		err = get_user(t, p);
-+		if (err)
-+			break;
-+
-+		err = ralink_wdt_set_timeout(t);
-+		if (err)
-+			break;
-+
-+		/* fallthrough */
-+	case WDIOC_GETTIMEOUT:
-+		err = put_user(ralink_wdt_timeout, p);
-+		break;
-+
-+	default:
-+		err = -ENOTTY;
-+		break;
-+	}
-+
-+	return err;
-+}
-+
-+static const struct file_operations ralink_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.write		= rt_wdt_w32ite,
-+	.unlocked_ioctl	= ralink_wdt_ioctl,
-+	.open		= ralink_wdt_open,
-+	.release	= ralink_wdt_release,
-+};
-+
-+static struct miscdevice ralink_wdt_miscdev = {
-+	.minor = WATCHDOG_MINOR,
-+	.name = "watchdog",
-+	.fops = &ralink_wdt_fops,
-+};
-+
-+static int ralink_wdt_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+	int err;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		dev_err(&pdev->dev, "no memory resource found\n");
-+		return -EINVAL;
-+	}
-+
-+	ralink_wdt_base = ioremap(res->start, resource_size(res));
-+	if (!ralink_wdt_base)
-+		return -ENOMEM;
-+
-+	ralink_wdt_clk = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(ralink_wdt_clk)) {
-+		err = PTR_ERR(ralink_wdt_clk);
-+		goto err_unmap;
-+	}
-+
-+	err = clk_enable(ralink_wdt_clk);
-+	if (err)
-+		goto err_clk_put;
-+
-+	ralink_wdt_freq = clk_get_rate(ralink_wdt_clk) / RALINK_WDT_PRESCALE;
-+	if (!ralink_wdt_freq) {
-+		err = -EINVAL;
-+		goto err_clk_disable;
-+	}
-+
-+	ralink_wdt_max_timeout = (0xfffful / ralink_wdt_freq);
-+	if (ralink_wdt_timeout < 1 ||
-+	    ralink_wdt_timeout > ralink_wdt_max_timeout) {
-+		ralink_wdt_timeout = ralink_wdt_max_timeout;
-+		dev_info(&pdev->dev,
-+			"timeout value must be 0 < timeout <= %d, using %d\n",
-+			ralink_wdt_max_timeout, ralink_wdt_timeout);
-+	}
-+
-+	err = misc_register(&ralink_wdt_miscdev);
-+	if (err) {
-+		dev_err(&pdev->dev,
-+			"unable to register misc device, err=%d\n", err);
-+		goto err_clk_disable;
-+	}
-+
-+	return 0;
-+
-+err_clk_disable:
-+	clk_disable(ralink_wdt_clk);
-+err_clk_put:
-+	clk_put(ralink_wdt_clk);
-+err_unmap:
-+	iounmap(ralink_wdt_base);
-+	return err;
-+}
-+
-+static int ralink_wdt_remove(struct platform_device *pdev)
-+{
-+	misc_deregister(&ralink_wdt_miscdev);
-+	clk_disable(ralink_wdt_clk);
-+	clk_put(ralink_wdt_clk);
-+	iounmap(ralink_wdt_base);
-+	return 0;
-+}
-+
-+static void ralink_wdt_shutdown(struct platform_device *pdev)
-+{
-+	ralink_wdt_disable();
-+}
-+
-+static const struct of_device_id ralink_wdt_match[] = {
-+	{ .compatible = "ralink,rt2880-wdt" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_wdt_match);
-+
-+static struct platform_driver ralink_wdt_driver = {
-+	.probe		= ralink_wdt_probe,
-+	.remove		= ralink_wdt_remove,
-+	.shutdown	= ralink_wdt_shutdown,
-+	.driver		= {
-+		.name		= DRIVER_NAME,
-+		.owner		= THIS_MODULE,
-+		.of_match_table	= ralink_wdt_match,
-+	},
-+};
-+
-+module_platform_driver(ralink_wdt_driver);
-+
-+MODULE_DESCRIPTION("MediaTek/Ralink RT288X/RT305X hardware watchdog driver");
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/ramips/patches-3.8/0203-owrt-OF-USB-add-OF-binding-for-ehci-and-ohci-platfor.patch b/target/linux/ramips/patches-3.8/0203-owrt-OF-USB-add-OF-binding-for-ehci-and-ohci-platfor.patch
deleted file mode 100644
index 13a45b2626..0000000000
--- a/target/linux/ramips/patches-3.8/0203-owrt-OF-USB-add-OF-binding-for-ehci-and-ohci-platfor.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 3c99a50d689cb4811b13b9810d18c9316587216f Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 18 Mar 2013 20:51:21 +0100
-Subject: [PATCH 203/208] owrt: OF: USB: add OF binding for ehci and ohci
- platform driver
-
-Make ohci-platform and ehci-platform loadable from OF.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/usb/host/ehci-platform.c |    7 +++++++
- drivers/usb/host/ohci-platform.c |    7 +++++++
- 2 files changed, 14 insertions(+)
-
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -183,6 +183,12 @@ static int ehci_platform_resume(struct d
- #define ehci_platform_resume	NULL
- #endif /* CONFIG_PM */
- 
-+static const struct of_device_id ehci_match_table[] = {
-+	{ .compatible = "ehci-platform" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ehci_match_table);
-+
- static const struct platform_device_id ehci_platform_table[] = {
- 	{ "ehci-platform", 0 },
- 	{ }
-@@ -203,6 +209,7 @@ static struct platform_driver ehci_platf
- 		.owner	= THIS_MODULE,
- 		.name	= "ehci-platform",
- 		.pm	= &ehci_platform_pm_ops,
-+		.of_match_table = ehci_match_table,
- 	}
- };
- 
---- a/drivers/usb/host/ohci-platform.c
-+++ b/drivers/usb/host/ohci-platform.c
-@@ -200,6 +200,12 @@ static int ohci_platform_resume(struct d
- #define ohci_platform_resume	NULL
- #endif /* CONFIG_PM */
- 
-+static const struct of_device_id ohci_match_table[] = {
-+	{ .compatible = "ohci-platform" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ohci_match_table);
-+
- static const struct platform_device_id ohci_platform_table[] = {
- 	{ "ohci-platform", 0 },
- 	{ }
-@@ -220,5 +226,6 @@ static struct platform_driver ohci_platf
- 		.owner	= THIS_MODULE,
- 		.name	= "ohci-platform",
- 		.pm	= &ohci_platform_pm_ops,
-+		.of_match_table = ohci_match_table,
- 	}
- };
diff --git a/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch b/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch
deleted file mode 100644
index 0fedc91b77..0000000000
--- a/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch
+++ /dev/null
@@ -1,325 +0,0 @@
-From d7e679017ec92824145b275572f6ef83d461f076 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 19 Mar 2013 09:26:22 +0100
-Subject: [PATCH 204/208] owrt: MIPS: ralink: add usb platform support
-
-Add code to load the platform ehci/ohci driver on Ralink SoC. For the usb core
-to work we need to populate the platform_data during boot, prior to the usb
-driver being loaded.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Makefile     |    4 +-
- arch/mips/ralink/common.h     |    1 +
- arch/mips/ralink/mt7620.c     |    5 ++
- arch/mips/ralink/of.c         |    1 +
- arch/mips/ralink/rt305x-usb.c |  120 +++++++++++++++++++++++++++++++++++++++++
- arch/mips/ralink/rt3883-usb.c |  118 ++++++++++++++++++++++++++++++++++++++++
- 6 files changed, 247 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/ralink/rt305x-usb.c
- create mode 100644 arch/mips/ralink/rt3883-usb.c
-
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
-@@ -9,8 +9,8 @@
- obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o
- 
- obj-$(CONFIG_SOC_RT288X) += rt288x.o
--obj-$(CONFIG_SOC_RT305X) += rt305x.o
--obj-$(CONFIG_SOC_RT3883) += rt3883.o
-+obj-$(CONFIG_SOC_RT305X) += rt305x.o rt305x-usb.o
-+obj-$(CONFIG_SOC_RT3883) += rt3883.o rt3883-usb.o
- obj-$(CONFIG_SOC_MT7620) += mt7620.o
- 
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -51,5 +51,6 @@ extern void prom_soc_init(struct ralink_
- __iomem void *plat_of_remap_node(const char *node);
- 
- void ralink_pinmux(void);
-+void ralink_usb_platform(void);
- 
- #endif /* _RALINK_COMMON_H__ */
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -140,6 +140,11 @@ struct ralink_pinmux rt_gpio_pinmux = {
- 	.uart_mask = MT7620_GPIO_MODE_GPIO,
- };
- 
-+void ralink_usb_platform(void)
-+{
-+
-+}
-+
- void __init ralink_clk_init(void)
- {
- 	unsigned long cpu_rate, sys_rate;
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -111,6 +111,7 @@ static int __init plat_of_setup(void)
- 		panic("failed to populate DT\n");
- 
- 	ralink_pinmux();
-+	ralink_usb_platform();
- 
- 	return 0;
- }
---- /dev/null
-+++ b/arch/mips/ralink/rt305x-usb.c
-@@ -0,0 +1,120 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+
-+#include <linux/delay.h>
-+#include <linux/of_platform.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/usb/ohci_pdriver.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+#include <asm/mach-ralink/rt305x.h>
-+
-+static atomic_t rt3352_usb_pwr_ref = ATOMIC_INIT(0);
-+
-+static int rt3352_usb_power_on(struct platform_device *pdev)
-+{
-+
-+	if (atomic_inc_return(&rt3352_usb_pwr_ref) == 1) {
-+		u32 t;
-+
-+		t = rt_sysc_r32(RT3352_SYSC_REG_USB_PS);
-+
-+		/* enable clock for port0's and port1's phys */
-+		t = rt_sysc_r32(RT3352_SYSC_REG_CLKCFG1);
-+		t |= RT3352_CLKCFG1_UPHY0_CLK_EN | RT3352_CLKCFG1_UPHY1_CLK_EN;
-+		rt_sysc_w32(t, RT3352_SYSC_REG_CLKCFG1);
-+		mdelay(500);
-+
-+		/* pull USBHOST and USBDEV out from reset */
-+		t = rt_sysc_r32(RT3352_SYSC_REG_RSTCTRL);
-+		t &= ~(RT3352_RSTCTRL_UHST | RT3352_RSTCTRL_UDEV);
-+		rt_sysc_w32(t, RT3352_SYSC_REG_RSTCTRL);
-+		mdelay(500);
-+
-+		/* enable host mode */
-+		t = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG1);
-+		t |= RT3352_SYSCFG1_USB0_HOST_MODE;
-+		rt_sysc_w32(t, RT3352_SYSC_REG_SYSCFG1);
-+
-+		t = rt_sysc_r32(RT3352_SYSC_REG_USB_PS);
-+	}
-+
-+	return 0;
-+}
-+
-+static void rt3352_usb_power_off(struct platform_device *pdev)
-+{
-+	if (atomic_dec_return(&rt3352_usb_pwr_ref) == 0) {
-+		u32 t;
-+
-+		/* put USBHOST and USBDEV into reset */
-+		t = rt_sysc_r32(RT3352_SYSC_REG_RSTCTRL);
-+		t |= RT3352_RSTCTRL_UHST | RT3352_RSTCTRL_UDEV;
-+		rt_sysc_w32(t, RT3352_SYSC_REG_RSTCTRL);
-+		udelay(10000);
-+
-+		/* disable clock for port0's and port1's phys*/
-+		t = rt_sysc_r32(RT3352_SYSC_REG_CLKCFG1);
-+		t &= ~(RT3352_CLKCFG1_UPHY0_CLK_EN | RT3352_CLKCFG1_UPHY1_CLK_EN);
-+		rt_sysc_w32(t, RT3352_SYSC_REG_CLKCFG1);
-+		udelay(10000);
-+	}
-+}
-+
-+static struct usb_ehci_pdata rt3352_ehci_data = {
-+	.power_on	= rt3352_usb_power_on,
-+	.power_off	= rt3352_usb_power_off,
-+};
-+
-+static struct usb_ohci_pdata rt3352_ohci_data = {
-+	.power_on	= rt3352_usb_power_on,
-+	.power_off	= rt3352_usb_power_off,
-+};
-+
-+static void ralink_add_usb(char *name, void *pdata, u64 *mask)
-+{
-+	struct device_node *node;
-+	struct platform_device *pdev;
-+
-+	node = of_find_compatible_node(NULL, NULL, name);
-+	if (!node)
-+		return;
-+
-+	pdev = of_find_device_by_node(node);
-+	if (!pdev)
-+		goto error_out;
-+
-+	if (pdata)
-+		pdev->dev.platform_data = pdata;
-+	if (mask) {
-+		pdev->dev.dma_mask = mask;
-+		pdev->dev.coherent_dma_mask = *mask;
-+	}
-+
-+error_out:
-+	of_node_put(node);
-+}
-+
-+static u64 rt3352_ohci_dmamask = DMA_BIT_MASK(32);
-+static u64 rt3352_ehci_dmamask = DMA_BIT_MASK(32);
-+
-+void ralink_usb_platform(void)
-+{
-+	if (soc_is_rt3352() || soc_is_rt5350()) {
-+		ralink_add_usb("ohci-platform",
-+				&rt3352_ohci_data, &rt3352_ohci_dmamask);
-+		ralink_add_usb("ehci-platform",
-+				&rt3352_ehci_data, &rt3352_ehci_dmamask);
-+	}
-+}
---- /dev/null
-+++ b/arch/mips/ralink/rt3883-usb.c
-@@ -0,0 +1,118 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+
-+#include <linux/delay.h>
-+#include <linux/of_platform.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/usb/ohci_pdriver.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+#include <asm/mach-ralink/rt3883.h>
-+
-+static atomic_t rt3883_usb_pwr_ref = ATOMIC_INIT(0);
-+
-+static int rt3883_usb_power_on(struct platform_device *pdev)
-+{
-+	if (atomic_inc_return(&rt3883_usb_pwr_ref) == 1) {
-+		u32 t;
-+
-+		t = rt_sysc_r32(RT3883_SYSC_REG_USB_PS);
-+
-+		/* enable clock for port0's and port1's phys */
-+		t = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
-+		t |= RT3883_CLKCFG1_UPHY0_CLK_EN | RT3883_CLKCFG1_UPHY1_CLK_EN;
-+		rt_sysc_w32(t, RT3883_SYSC_REG_CLKCFG1);
-+		mdelay(500);
-+
-+		/* pull USBHOST and USBDEV out from reset */
-+		t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
-+		t &= ~(RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV);
-+		rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
-+		mdelay(500);
-+
-+		/* enable host mode */
-+		t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
-+		t |= RT3883_SYSCFG1_USB0_HOST_MODE;
-+		rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
-+
-+		t = rt_sysc_r32(RT3883_SYSC_REG_USB_PS);
-+	}
-+
-+	return 0;
-+}
-+
-+static void rt3883_usb_power_off(struct platform_device *pdev)
-+{
-+	if (atomic_dec_return(&rt3883_usb_pwr_ref) == 0) {
-+		u32 t;
-+
-+		/* put USBHOST and USBDEV into reset */
-+		t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
-+		t |= RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV;
-+		rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
-+		udelay(10000);
-+
-+		/* disable clock for port0's and port1's phys*/
-+		t = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
-+		t &= ~(RT3883_CLKCFG1_UPHY0_CLK_EN |
-+		RT3883_CLKCFG1_UPHY1_CLK_EN);
-+		rt_sysc_w32(t, RT3883_SYSC_REG_CLKCFG1);
-+		udelay(10000);
-+	}
-+}
-+
-+static struct usb_ohci_pdata rt3883_ohci_data = {
-+	.power_on	= rt3883_usb_power_on,
-+	.power_off	= rt3883_usb_power_off,
-+};
-+
-+static struct usb_ehci_pdata rt3883_ehci_data = {
-+	.power_on	= rt3883_usb_power_on,
-+	.power_off	= rt3883_usb_power_off,
-+};
-+
-+static void ralink_add_usb(char *name, void *pdata, u64 *mask)
-+{
-+	struct device_node *node;
-+	struct platform_device *pdev;
-+
-+	node = of_find_compatible_node(NULL, NULL, name);
-+	if (!node)
-+		return;
-+
-+	pdev = of_find_device_by_node(node);
-+	if (!pdev)
-+		goto error_out;
-+
-+	if (pdata)
-+		pdev->dev.platform_data = pdata;
-+	if (mask) {
-+		pdev->dev.dma_mask = mask;
-+		pdev->dev.coherent_dma_mask = *mask;
-+	}
-+
-+error_out:
-+	of_node_put(node);
-+}
-+
-+static u64 rt3883_ohci_dmamask = DMA_BIT_MASK(32);
-+static u64 rt3883_ehci_dmamask = DMA_BIT_MASK(32);
-+
-+void ralink_usb_platform(void)
-+{
-+	ralink_add_usb("ohci-platform",
-+			&rt3883_ohci_data, &rt3883_ohci_dmamask);
-+	ralink_add_usb("ehci-platform",
-+			&rt3883_ehci_data, &rt3883_ehci_dmamask);
-+}
---- a/arch/mips/ralink/rt288x.c
-+++ b/arch/mips/ralink/rt288x.c
-@@ -74,6 +74,11 @@ struct ralink_pinmux rt_gpio_pinmux = {
- 	.wdt_reset = rt288x_wdt_reset,
- };
- 
-+void ralink_usb_platform(void)
-+{
-+
-+}
-+
- void __init ralink_clk_init(void)
- {
- 	unsigned long cpu_rate;
diff --git a/target/linux/ramips/patches-3.8/0100-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch b/target/linux/ramips/patches-3.9/0100-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch
index d5fe653c38..89f40bf2e1 100644
--- a/target/linux/ramips/patches-3.8/0100-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch
+++ b/target/linux/ramips/patches-3.9/0100-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch
@@ -1,7 +1,7 @@
-From dd4bb7e821d112bff981016fd4e7c014ca9425f9 Mon Sep 17 00:00:00 2001
+From 67d6534cdc4f90e6998a79ac57d5318412f18486 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Thu, 11 Apr 2013 05:34:59 +0000
-Subject: [PATCH 100/137] MIPS: move mips_{set,get}_machine_name() to a more
+Subject: [PATCH 100/164] MIPS: move mips_{set,get}_machine_name() to a more
  generic place
 
 Previously this functionality was only available to users of the mips_machine
@@ -17,6 +17,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5164/
  arch/mips/kernel/prom.c              |   31 +++++++++++++++++++++++++++++++
  5 files changed, 35 insertions(+), 26 deletions(-)
 
+diff --git a/arch/mips/include/asm/mips_machine.h b/arch/mips/include/asm/mips_machine.h
+index 363bb35..9d00aeb 100644
 --- a/arch/mips/include/asm/mips_machine.h
 +++ b/arch/mips/include/asm/mips_machine.h
 @@ -42,13 +42,9 @@ extern long __mips_machines_end;
@@ -33,9 +35,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5164/
  #endif /* CONFIG_MIPS_MACHINE */
  
  #endif /* __ASM_MIPS_MACHINE_H */
+diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
+index 8808bf5..1e7e096 100644
 --- a/arch/mips/include/asm/prom.h
 +++ b/arch/mips/include/asm/prom.h
-@@ -48,4 +48,7 @@ extern void __dt_setup_arch(struct boot_
+@@ -48,4 +48,7 @@ extern void __dt_setup_arch(struct boot_param_header *bph);
  static inline void device_tree_init(void) { }
  #endif /* CONFIG_OF */
  
@@ -43,6 +47,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5164/
 +extern void mips_set_machine_name(const char *name);
 +
  #endif /* __ASM_PROM_H */
+diff --git a/arch/mips/kernel/mips_machine.c b/arch/mips/kernel/mips_machine.c
+index 411a058..6dc5866 100644
 --- a/arch/mips/kernel/mips_machine.c
 +++ b/arch/mips/kernel/mips_machine.c
 @@ -13,7 +13,6 @@
@@ -53,7 +59,7 @@ Patchwork: http://patchwork.linux-mips.org/patch/5164/
  
  #define for_each_machine(mach) \
  	for ((mach) = (struct mips_machine *)&__mips_machines_start; \
-@@ -21,25 +20,6 @@ static char *mips_machine_name = "Unknow
+@@ -21,25 +20,6 @@ static char *mips_machine_name = "Unknown";
  	     (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \
  	     (mach)++)
  
@@ -87,6 +93,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5164/
  
  	if (mips_machine->mach_setup)
  		mips_machine->mach_setup();
+diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
+index 7a54f74..1dd137b 100644
 --- a/arch/mips/kernel/proc.c
 +++ b/arch/mips/kernel/proc.c
 @@ -12,7 +12,7 @@
@@ -98,6 +106,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5164/
  
  unsigned int vced_count, vcei_count;
  
+diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
+index 028f6f8..b68e53b 100644
 --- a/arch/mips/kernel/prom.c
 +++ b/arch/mips/kernel/prom.c
 @@ -23,6 +23,22 @@
@@ -123,7 +133,7 @@ Patchwork: http://patchwork.linux-mips.org/patch/5164/
  int __init early_init_dt_scan_memory_arch(unsigned long node,
  					  const char *uname, int depth,
  					  void *data)
-@@ -50,6 +66,18 @@ void __init early_init_dt_setup_initrd_a
+@@ -50,6 +66,18 @@ void __init early_init_dt_setup_initrd_arch(unsigned long start,
  }
  #endif
  
@@ -142,7 +152,7 @@ Patchwork: http://patchwork.linux-mips.org/patch/5164/
  void __init early_init_devtree(void *params)
  {
  	/* Setup flat device-tree pointer */
-@@ -65,6 +93,9 @@ void __init early_init_devtree(void *par
+@@ -65,6 +93,9 @@ void __init early_init_devtree(void *params)
  	/* Scan memory nodes */
  	of_scan_flat_dt(early_init_dt_scan_root, NULL);
  	of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
@@ -152,3 +162,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5164/
  }
  
  void __init __dt_setup_arch(struct boot_param_header *bph)
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0101-MIPS-ralink-add-PCI-IRQ-handling.patch b/target/linux/ramips/patches-3.9/0101-MIPS-ralink-add-PCI-IRQ-handling.patch
new file mode 100644
index 0000000000..6e4e671e5b
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0101-MIPS-ralink-add-PCI-IRQ-handling.patch
@@ -0,0 +1,40 @@
+From ca19f83f8551e6dd19073f04ad91639e98d6e22e Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 10 Apr 2013 09:07:27 +0200
+Subject: [PATCH 101/164] MIPS: ralink: add PCI IRQ handling
+
+The Ralink IRQ code was not handling the PCI IRQ yet. Add this functionaility
+to make PCI work on rt3883.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5165/
+---
+ arch/mips/ralink/irq.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
+index 6d054c5..d9807d0 100644
+--- a/arch/mips/ralink/irq.c
++++ b/arch/mips/ralink/irq.c
+@@ -31,6 +31,7 @@
+ #define INTC_INT_GLOBAL		BIT(31)
+ 
+ #define RALINK_CPU_IRQ_INTC	(MIPS_CPU_IRQ_BASE + 2)
++#define RALINK_CPU_IRQ_PCI	(MIPS_CPU_IRQ_BASE + 4)
+ #define RALINK_CPU_IRQ_FE	(MIPS_CPU_IRQ_BASE + 5)
+ #define RALINK_CPU_IRQ_WIFI	(MIPS_CPU_IRQ_BASE + 6)
+ #define RALINK_CPU_IRQ_COUNTER	(MIPS_CPU_IRQ_BASE + 7)
+@@ -104,6 +105,9 @@ asmlinkage void plat_irq_dispatch(void)
+ 	else if (pending & STATUSF_IP6)
+ 		do_IRQ(RALINK_CPU_IRQ_WIFI);
+ 
++	else if (pending & STATUSF_IP4)
++		do_IRQ(RALINK_CPU_IRQ_PCI);
++
+ 	else if (pending & STATUSF_IP2)
+ 		do_IRQ(RALINK_CPU_IRQ_INTC);
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0102-MIPS-ralink-add-RT3352-register-defines.patch b/target/linux/ramips/patches-3.9/0102-MIPS-ralink-add-RT3352-register-defines.patch
index 2d296db665..726745cd7c 100644
--- a/target/linux/ramips/patches-3.8/0102-MIPS-ralink-add-RT3352-register-defines.patch
+++ b/target/linux/ramips/patches-3.9/0102-MIPS-ralink-add-RT3352-register-defines.patch
@@ -1,7 +1,7 @@
-From e6bcdad6f0811daedc2a448f5d7fb98c116a5241 Mon Sep 17 00:00:00 2001
+From 48cf6bc7019d418e18831214731a55ec7320abb3 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Thu, 21 Mar 2013 19:01:49 +0100
-Subject: [PATCH 102/137] MIPS: ralink: add RT3352 register defines
+Subject: [PATCH 102/164] MIPS: ralink: add RT3352 register defines
 
 Add a few missing defines that are needed to make USB and clock detection work
 on the RT3352.
@@ -13,6 +13,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5166/
  arch/mips/include/asm/mach-ralink/rt305x.h |   13 +++++++++++++
  1 file changed, 13 insertions(+)
 
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
+index 7d344f2..e36c3c5 100644
 --- a/arch/mips/include/asm/mach-ralink/rt305x.h
 +++ b/arch/mips/include/asm/mach-ralink/rt305x.h
 @@ -136,4 +136,17 @@ static inline int soc_is_rt5350(void)
@@ -33,3 +35,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5166/
 +#define RT3352_SYSCFG1_USB0_HOST_MODE	BIT(10)
 +
  #endif
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0103-MIPS-ralink-fix-RT305x-clock-setup.patch b/target/linux/ramips/patches-3.9/0103-MIPS-ralink-fix-RT305x-clock-setup.patch
new file mode 100644
index 0000000000..735ed8dd73
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0103-MIPS-ralink-fix-RT305x-clock-setup.patch
@@ -0,0 +1,52 @@
+From 93ded6b41dfdf71f2d2b2cf96e26f5784f373f5c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 22 Mar 2013 19:25:59 +0100
+Subject: [PATCH 103/164] MIPS: ralink: fix RT305x clock setup
+
+Add a few missing clocks.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5167/
+---
+ arch/mips/ralink/rt305x.c |   12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index 0a4bbdc..5d49a54 100644
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -124,6 +124,8 @@ struct ralink_pinmux gpio_pinmux = {
+ void __init ralink_clk_init(void)
+ {
+ 	unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
++	unsigned long wmac_rate = 40000000;
++
+ 	u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+ 
+ 	if (soc_is_rt305x() || soc_is_rt3350()) {
+@@ -176,11 +178,21 @@ void __init ralink_clk_init(void)
+ 		BUG();
+ 	}
+ 
++	if (soc_is_rt3352() || soc_is_rt5350()) {
++		u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0);
++
++		if (!(val & RT3352_CLKCFG0_XTAL_SEL))
++			wmac_rate = 20000000;
++	}
++
+ 	ralink_clk_add("cpu", cpu_rate);
+ 	ralink_clk_add("10000b00.spi", sys_rate);
+ 	ralink_clk_add("10000100.timer", wdt_rate);
++	ralink_clk_add("10000120.watchdog", wdt_rate);
+ 	ralink_clk_add("10000500.uart", uart_rate);
+ 	ralink_clk_add("10000c00.uartlite", uart_rate);
++	ralink_clk_add("10100000.ethernet", sys_rate);
++	ralink_clk_add("10180000.wmac", wmac_rate);
+ }
+ 
+ void __init ralink_of_remap(void)
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0104-MIPS-ralink-add-missing-comment-in-irq-driver.patch b/target/linux/ramips/patches-3.9/0104-MIPS-ralink-add-missing-comment-in-irq-driver.patch
index 3218384973..e96a13e48a 100644
--- a/target/linux/ramips/patches-3.8/0104-MIPS-ralink-add-missing-comment-in-irq-driver.patch
+++ b/target/linux/ramips/patches-3.9/0104-MIPS-ralink-add-missing-comment-in-irq-driver.patch
@@ -1,7 +1,7 @@
-From 2747613b1bba0d4497ed2c4a77e2011d02029153 Mon Sep 17 00:00:00 2001
+From cd202a8165e847e1c7bf8454982149730376f27a Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 16 Mar 2013 16:28:54 +0100
-Subject: [PATCH 104/137] MIPS: ralink: add missing comment in irq driver
+Subject: [PATCH 104/164] MIPS: ralink: add missing comment in irq driver
 
 Trivial patch that adds a comment that makes the code more readable.
 
@@ -12,9 +12,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5168/
  arch/mips/ralink/irq.c |    1 +
  1 file changed, 1 insertion(+)
 
+diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
+index d9807d0..320b1f1 100644
 --- a/arch/mips/ralink/irq.c
 +++ b/arch/mips/ralink/irq.c
-@@ -166,6 +166,7 @@ static int __init intc_of_init(struct de
+@@ -166,6 +166,7 @@ static int __init intc_of_init(struct device_node *node,
  	irq_set_chained_handler(irq, ralink_intc_irq_handler);
  	irq_set_handler_data(irq, domain);
  
@@ -22,3 +24,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5168/
  	cp0_perfcount_irq = irq_create_mapping(domain, 9);
  
  	return 0;
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0105-MIPS-ralink-add-RT5350-sdram-register-defines.patch b/target/linux/ramips/patches-3.9/0105-MIPS-ralink-add-RT5350-sdram-register-defines.patch
index ccabcbd64b..49860a56c6 100644
--- a/target/linux/ramips/patches-3.8/0105-MIPS-ralink-add-RT5350-sdram-register-defines.patch
+++ b/target/linux/ramips/patches-3.9/0105-MIPS-ralink-add-RT5350-sdram-register-defines.patch
@@ -1,7 +1,7 @@
-From 31f4b3ca1c9bb4bcbbebbe5db5a33ac82f130d9c Mon Sep 17 00:00:00 2001
+From 4c77c43dbef08096dd3798d4e421495b2c048285 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Mon, 25 Mar 2013 11:19:58 +0100
-Subject: [PATCH 105/137] MIPS: ralink: add RT5350 sdram register defines
+Subject: [PATCH 105/164] MIPS: ralink: add RT5350 sdram register defines
 
 Add a few missing defines that are needed to make memory detection work on the
 RT5350.
@@ -13,6 +13,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5169/
  arch/mips/include/asm/mach-ralink/rt305x.h |    8 ++++++++
  1 file changed, 8 insertions(+)
 
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
+index e36c3c5..80cda8a 100644
 --- a/arch/mips/include/asm/mach-ralink/rt305x.h
 +++ b/arch/mips/include/asm/mach-ralink/rt305x.h
 @@ -97,6 +97,14 @@ static inline int soc_is_rt5350(void)
@@ -30,3 +32,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5169/
  /* multi function gpio pins */
  #define RT305X_GPIO_I2C_SD		1
  #define RT305X_GPIO_I2C_SCLK		2
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0106-MIPS-ralink-make-early_printk-work-on-RT2880.patch b/target/linux/ramips/patches-3.9/0106-MIPS-ralink-make-early_printk-work-on-RT2880.patch
index 4636862fe5..f734032091 100644
--- a/target/linux/ramips/patches-3.8/0106-MIPS-ralink-make-early_printk-work-on-RT2880.patch
+++ b/target/linux/ramips/patches-3.9/0106-MIPS-ralink-make-early_printk-work-on-RT2880.patch
@@ -1,7 +1,7 @@
-From d83e83a544258b68b4411232a31ccce134244a19 Mon Sep 17 00:00:00 2001
+From 3d38304ce93752b9f196b22b7abeb8296fff7ba7 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Tue, 9 Apr 2013 18:31:15 +0200
-Subject: [PATCH 106/137] MIPS: ralink: make early_printk work on RT2880
+Subject: [PATCH 106/164] MIPS: ralink: make early_printk work on RT2880
 
 RT2880 has a different location for the early serial port.
 
@@ -12,6 +12,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5170/
  arch/mips/ralink/early_printk.c |    4 ++++
  1 file changed, 4 insertions(+)
 
+diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
+index c4ae47e..b46d041 100644
 --- a/arch/mips/ralink/early_printk.c
 +++ b/arch/mips/ralink/early_printk.c
 @@ -11,7 +11,11 @@
@@ -26,3 +28,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5170/
  
  #define UART_REG_RX             0x00
  #define UART_REG_TX             0x04
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0107-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch b/target/linux/ramips/patches-3.9/0107-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch
index d10b159ac8..877ca66c67 100644
--- a/target/linux/ramips/patches-3.8/0107-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch
+++ b/target/linux/ramips/patches-3.9/0107-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch
@@ -1,7 +1,7 @@
-From b4c597bd073d5e4c9cee800ac5a25fb9ff1c0ef7 Mon Sep 17 00:00:00 2001
+From 5dad33f0c1dd0b1605df6571e3493799106f36ee Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 12 Apr 2013 22:12:09 +0200
-Subject: [PATCH 107/137] MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmux
+Subject: [PATCH 107/164] MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmux
 
 Add proper namespacing to the variable.
 
@@ -12,6 +12,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5171/
  arch/mips/ralink/rt305x.c |    2 +-
  2 files changed, 2 insertions(+), 2 deletions(-)
 
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index 3009903..f4b19c6 100644
 --- a/arch/mips/ralink/common.h
 +++ b/arch/mips/ralink/common.h
 @@ -24,7 +24,7 @@ struct ralink_pinmux {
@@ -23,6 +25,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5171/
  
  struct ralink_soc_info {
  	unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index 5d49a54..f1a6c33 100644
 --- a/arch/mips/ralink/rt305x.c
 +++ b/arch/mips/ralink/rt305x.c
 @@ -114,7 +114,7 @@ void rt305x_wdt_reset(void)
@@ -34,3 +38,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5171/
  	.mode = mode_mux,
  	.uart = uart_mux,
  	.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0108-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch b/target/linux/ramips/patches-3.9/0108-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch
index f09d57f818..cb18cfe309 100644
--- a/target/linux/ramips/patches-3.8/0108-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch
+++ b/target/linux/ramips/patches-3.9/0108-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch
@@ -1,7 +1,7 @@
-From 96eba63bf18cd3d96ded62fb809c8cf7e0f2e2c1 Mon Sep 17 00:00:00 2001
+From 7a77fb07f96b8c7fa446ca1b62eddf7213362a70 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 12 Apr 2013 22:16:12 +0200
-Subject: [PATCH 108/137] MIPS: ralink: make the RT305x pinmuxing structure
+Subject: [PATCH 108/164] MIPS: ralink: make the RT305x pinmuxing structure
  static
 
 These structures are exported via struct ralink_pinmux rt_gpio_pinmux and can
@@ -13,6 +13,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5172/
  arch/mips/ralink/rt305x.c |    6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)
 
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index f1a6c33..5b42078 100644
 --- a/arch/mips/ralink/rt305x.c
 +++ b/arch/mips/ralink/rt305x.c
 @@ -22,7 +22,7 @@
@@ -42,3 +44,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5172/
  {
  	u32 t;
  
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0109-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch b/target/linux/ramips/patches-3.9/0109-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch
index 36e187db2d..be32230ad5 100644
--- a/target/linux/ramips/patches-3.8/0109-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch
+++ b/target/linux/ramips/patches-3.9/0109-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch
@@ -1,7 +1,7 @@
-From 61d50d9625dcb454759950ebd45a335c3aaacf84 Mon Sep 17 00:00:00 2001
+From b9ed5175f31c55122690a3e9af1cea2d1937768d Mon Sep 17 00:00:00 2001
 From: Gabor Juhos <juhosg@openwrt.org>
 Date: Fri, 12 Apr 2013 12:40:23 +0200
-Subject: [PATCH 109/137] MIPS: ralink: add pci group to struct ralink_pinmux
+Subject: [PATCH 109/164] MIPS: ralink: add pci group to struct ralink_pinmux
 
 This will be used for RT3662/RT3883.
 
@@ -12,6 +12,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5173/
  arch/mips/ralink/common.h |    3 +++
  1 file changed, 3 insertions(+)
 
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index f4b19c6..bebd149 100644
 --- a/arch/mips/ralink/common.h
 +++ b/arch/mips/ralink/common.h
 @@ -23,6 +23,9 @@ struct ralink_pinmux {
@@ -24,3 +26,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5173/
  };
  extern struct ralink_pinmux rt_gpio_pinmux;
  
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0110-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch b/target/linux/ramips/patches-3.9/0110-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch
index d4474e1022..904b11d8ee 100644
--- a/target/linux/ramips/patches-3.8/0110-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch
+++ b/target/linux/ramips/patches-3.9/0110-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch
@@ -1,7 +1,7 @@
-From faf5989efed503b2ee689dad82bb2d60da718d99 Mon Sep 17 00:00:00 2001
+From f4c0850f31389bbb6b8d806be7786efc62af1e84 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 12 Apr 2013 12:45:27 +0200
-Subject: [PATCH 110/137] MIPS: ralink: add uart mask to struct ralink_pinmux
+Subject: [PATCH 110/164] MIPS: ralink: add uart mask to struct ralink_pinmux
 
 Add a field for the uart muxing mask and set it inside the rt305x setup code.
 
@@ -12,6 +12,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5744/
  arch/mips/ralink/rt305x.c |    5 +++--
  2 files changed, 4 insertions(+), 2 deletions(-)
 
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index bebd149..299119b 100644
 --- a/arch/mips/ralink/common.h
 +++ b/arch/mips/ralink/common.h
 @@ -22,6 +22,7 @@ struct ralink_pinmux {
@@ -22,9 +24,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5744/
  	void (*wdt_reset)(void);
  	struct ralink_pinmux_grp *pci;
  	int pci_shift;
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index 5b42078..6aa3cb1 100644
 --- a/arch/mips/ralink/rt305x.c
 +++ b/arch/mips/ralink/rt305x.c
-@@ -91,12 +91,12 @@ static struct ralink_pinmux_grp uart_mux
+@@ -91,12 +91,12 @@ static struct ralink_pinmux_grp uart_mux[] = {
  		.name = "gpio uartf",
  		.mask = RT305X_GPIO_MODE_GPIO_UARTF,
  		.gpio_first = RT305X_GPIO_7,
@@ -47,3 +51,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5744/
  	.wdt_reset = rt305x_wdt_reset,
  };
  
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0111-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch b/target/linux/ramips/patches-3.9/0111-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch
index 9cfa509e54..4f608f2928 100644
--- a/target/linux/ramips/patches-3.8/0111-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch
+++ b/target/linux/ramips/patches-3.9/0111-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch
@@ -1,7 +1,7 @@
-From cccb9a7b42227a442ca42d590c838c8b6fa0eba1 Mon Sep 17 00:00:00 2001
+From 9a63b5b2e6684a80053b866de0c83adf284be857 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 27 Jan 2013 09:17:20 +0100
-Subject: [PATCH 111/137] MIPS: ralink: adds support for RT2880 SoC family
+Subject: [PATCH 111/164] MIPS: ralink: adds support for RT2880 SoC family
 
 Add support code for rt2880 SOC.
 
@@ -21,9 +21,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5176/
  create mode 100644 arch/mips/include/asm/mach-ralink/rt288x.h
  create mode 100644 arch/mips/ralink/rt288x.c
 
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 51244bf..e4da4f8 100644
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1189,7 +1189,7 @@ config BOOT_ELF32
+@@ -1152,7 +1152,7 @@ config BOOT_ELF32
  
  config MIPS_L1_CACHE_SHIFT
  	int
@@ -32,6 +34,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5176/
  	default "6" if MIPS_CPU_SCACHE
  	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
  	default "5"
+diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h
+new file mode 100644
+index 0000000..ad8b42d
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/rt288x.h
 @@ -0,0 +1,49 @@
@@ -84,6 +89,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5176/
 +#define CLKCFG_SRAM_CS_N_WDT		BIT(9)
 +
 +#endif
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index a0b0197..6723b94 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -6,6 +6,9 @@ choice
@@ -96,6 +103,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5176/
  	config SOC_RT305X
  		bool "RT305x"
  		select USB_ARCH_HAS_HCD
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 939757f..6d826f2 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -8,6 +8,7 @@
@@ -106,9 +115,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5176/
  obj-$(CONFIG_SOC_RT305X) += rt305x.o
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+index 6babd65..3f49e51 100644
 --- a/arch/mips/ralink/Platform
 +++ b/arch/mips/ralink/Platform
-@@ -5,6 +5,11 @@ core-$(CONFIG_RALINK)		+= arch/mips/rali
+@@ -5,6 +5,11 @@ core-$(CONFIG_RALINK)		+= arch/mips/ralink/
  cflags-$(CONFIG_RALINK)		+= -I$(srctree)/arch/mips/include/asm/mach-ralink
  
  #
@@ -120,6 +131,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5176/
  # Ralink RT305x
  #
  load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
+diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
+new file mode 100644
+index 0000000..1e0788e
 --- /dev/null
 +++ b/arch/mips/ralink/rt288x.c
 @@ -0,0 +1,139 @@
@@ -262,3 +276,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5176/
 +		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
 +		(id & CHIP_ID_REV_MASK));
 +}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0112-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch b/target/linux/ramips/patches-3.9/0112-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch
index 162d0cc180..47b13d8142 100644
--- a/target/linux/ramips/patches-3.8/0112-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch
+++ b/target/linux/ramips/patches-3.9/0112-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch
@@ -1,7 +1,7 @@
-From 5eb4dfe5072595e0706de3364f2da45378dbaca6 Mon Sep 17 00:00:00 2001
+From b91aa2fcc93a92d851baa0745790a999e1f31592 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 27 Jan 2013 09:39:02 +0100
-Subject: [PATCH 112/137] MIPS: ralink: adds support for RT3883 SoC family
+Subject: [PATCH 112/164] MIPS: ralink: adds support for RT3883 SoC family
 
 Add support code for rt3883 SOC.
 
@@ -20,9 +20,12 @@ Patchwork: http://patchwork.linux-mips.org/patch/5185/
  create mode 100644 arch/mips/include/asm/mach-ralink/rt3883.h
  create mode 100644 arch/mips/ralink/rt3883.c
 
+diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
+new file mode 100644
+index 0000000..b91c6c1
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/rt3883.h
-@@ -0,0 +1,248 @@
+@@ -0,0 +1,247 @@
 +/*
 + * Ralink RT3662/RT3883 SoC register definitions
 + *
@@ -177,7 +180,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5185/
 +#define RT3883_GPIO_SPI_MISO		6
 +#define RT3883_GPIO_7			7
 +#define RT3883_GPIO_10			10
-+#define RT3883_GPIO_11			11
 +#define RT3883_GPIO_14			14
 +#define RT3883_GPIO_UART1_TXD		15
 +#define RT3883_GPIO_UART1_RXD		16
@@ -271,6 +273,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5185/
 +#define RT3883_FLASH_CFG_WIDTH_32BIT	0x2
 +
 +#endif /* _RT3883_REGS_H_ */
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 6723b94..ce57d3e 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -15,6 +15,11 @@ choice
@@ -285,6 +289,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5185/
  endchoice
  
  choice
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 6d826f2..ba9669c 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -10,6 +10,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
@@ -295,9 +301,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5185/
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
  
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+index 3f49e51..f67c08d 100644
 --- a/arch/mips/ralink/Platform
 +++ b/arch/mips/ralink/Platform
-@@ -13,3 +13,8 @@ load-$(CONFIG_SOC_RT288X)	+= 0xffffffff8
+@@ -13,3 +13,8 @@ load-$(CONFIG_SOC_RT288X)	+= 0xffffffff88000000
  # Ralink RT305x
  #
  load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
@@ -306,6 +314,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5185/
 +# Ralink RT3883
 +#
 +load-$(CONFIG_SOC_RT3883)	+= 0xffffffff80000000
+diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
+new file mode 100644
+index 0000000..2d90aa9
 --- /dev/null
 +++ b/arch/mips/ralink/rt3883.c
 @@ -0,0 +1,242 @@
@@ -551,3 +562,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5185/
 +		(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
 +		(id & RT3883_REVID_ECO_ID_MASK));
 +}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0113-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch b/target/linux/ramips/patches-3.9/0113-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch
index d52803413c..cd6a97b9f6 100644
--- a/target/linux/ramips/patches-3.8/0113-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch
+++ b/target/linux/ramips/patches-3.9/0113-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch
@@ -1,7 +1,7 @@
-From a8d7045a9530d0a9e0c65c0f81852bd57ebde53c Mon Sep 17 00:00:00 2001
+From 878887d15bdee87366b7d3952d1c74c4b68a0782 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Thu, 21 Mar 2013 17:49:02 +0100
-Subject: [PATCH 113/137] MIPS: ralink: adds support for MT7620 SoC family
+Subject: [PATCH 113/164] MIPS: ralink: adds support for MT7620 SoC family
 
 Add support code for mt7620 SOC.
 
@@ -20,6 +20,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5177/
  create mode 100644 arch/mips/include/asm/mach-ralink/mt7620.h
  create mode 100644 arch/mips/ralink/mt7620.c
 
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+new file mode 100644
+index 0000000..b272649
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/mt7620.h
 @@ -0,0 +1,76 @@
@@ -99,6 +102,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5177/
 +#define MT7620_GPIO_MODE_WDT		BIT(22)
 +
 +#endif
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index ce57d3e..86f6c77 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -20,6 +20,9 @@ choice
@@ -111,6 +116,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5177/
  endchoice
  
  choice
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index ba9669c..38cf1a8 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -11,6 +11,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
@@ -121,9 +128,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5177/
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
  
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+index f67c08d..b2cbf16 100644
 --- a/arch/mips/ralink/Platform
 +++ b/arch/mips/ralink/Platform
-@@ -18,3 +18,8 @@ load-$(CONFIG_SOC_RT305X)	+= 0xffffffff8
+@@ -18,3 +18,8 @@ load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
  # Ralink RT3883
  #
  load-$(CONFIG_SOC_RT3883)	+= 0xffffffff80000000
@@ -132,6 +141,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5177/
 +# Ralink MT7620
 +#
 +load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+new file mode 100644
+index 0000000..eb00ab8
 --- /dev/null
 +++ b/arch/mips/ralink/mt7620.c
 @@ -0,0 +1,214 @@
@@ -349,3 +361,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5177/
 +	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
 +	dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
 +}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0114-MIPS-ralink-add-cpu-feature-overrides.h.patch b/target/linux/ramips/patches-3.9/0114-MIPS-ralink-add-cpu-feature-overrides.h.patch
index dc5dab98a1..d02e2407e2 100644
--- a/target/linux/ramips/patches-3.8/0114-MIPS-ralink-add-cpu-feature-overrides.h.patch
+++ b/target/linux/ramips/patches-3.9/0114-MIPS-ralink-add-cpu-feature-overrides.h.patch
@@ -1,7 +1,7 @@
-From 33c525913af22d1b799a7218ee48579c22a50cf8 Mon Sep 17 00:00:00 2001
+From f5d5b8b69f5b11fdd810a1a56eff91077ad5ba84 Mon Sep 17 00:00:00 2001
 From: Gabor Juhos <juhosg@openwrt.org>
 Date: Wed, 10 Apr 2013 09:19:07 +0200
-Subject: [PATCH 114/137] MIPS: ralink: add cpu-feature-overrides.h
+Subject: [PATCH 114/164] MIPS: ralink: add cpu-feature-overrides.h
 
 Add cpu-feature-overrides.h for RT288x, RT305x and RT3883.
 
@@ -18,6 +18,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5175/
  create mode 100644 arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
  create mode 100644 arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
 
+diff --git a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
+new file mode 100644
+index 0000000..72fc106
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
 @@ -0,0 +1,56 @@
@@ -77,6 +80,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5175/
 +#define cpu_icache_line_size()	16
 +
 +#endif /* _RT288X_CPU_FEATURE_OVERRIDES_H */
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
+new file mode 100644
+index 0000000..917c286
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
 @@ -0,0 +1,56 @@
@@ -136,6 +142,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5175/
 +#define cpu_icache_line_size()	32
 +
 +#endif /* _RT305X_CPU_FEATURE_OVERRIDES_H */
+diff --git a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
+new file mode 100644
+index 0000000..181fbf4
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
 @@ -0,0 +1,55 @@
@@ -194,9 +203,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5175/
 +#define cpu_icache_line_size()	32
 +
 +#endif /* _RT3883_CPU_FEATURE_OVERRIDES_H */
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+index b2cbf16..cda4b66 100644
 --- a/arch/mips/ralink/Platform
 +++ b/arch/mips/ralink/Platform
-@@ -8,16 +8,19 @@ cflags-$(CONFIG_RALINK)		+= -I$(srctree)
+@@ -8,16 +8,19 @@ cflags-$(CONFIG_RALINK)		+= -I$(srctree)/arch/mips/include/asm/mach-ralink
  # Ralink RT288x
  #
  load-$(CONFIG_SOC_RT288X)	+= 0xffffffff88000000
@@ -216,3 +227,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5175/
  
  #
  # Ralink MT7620
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0115-DT-add-vendor-prefixes-for-Ralink.patch b/target/linux/ramips/patches-3.9/0115-DT-add-vendor-prefixes-for-Ralink.patch
new file mode 100644
index 0000000000..cbae1080a8
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0115-DT-add-vendor-prefixes-for-Ralink.patch
@@ -0,0 +1,26 @@
+From 94299fd468be1bcac63eb159a7f280f3bc0351ec Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 13 Apr 2013 10:11:51 +0200
+Subject: [PATCH 115/164] DT: add vendor prefixes for Ralink
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Grant Likely <grant.likely@secretlab.ca>
+---
+ Documentation/devicetree/bindings/vendor-prefixes.txt |    1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
+index 19e1ef7..6527412 100644
+--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
++++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
+@@ -41,6 +41,7 @@ onnn	ON Semiconductor Corp.
+ picochip	Picochip Ltd
+ powervr	PowerVR (deprecated, use img)
+ qcom	Qualcomm, Inc.
++ralink	Mediatek/Ralink Technology Corp.
+ ramtron	Ramtron International
+ realtek Realtek Semiconductor Corp.
+ renesas	Renesas Electronics Corporation
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0116-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch b/target/linux/ramips/patches-3.9/0116-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch
index f9463c4cb0..b029e45307 100644
--- a/target/linux/ramips/patches-3.8/0116-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch
+++ b/target/linux/ramips/patches-3.9/0116-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch
@@ -1,7 +1,7 @@
-From fed1ff0d85b481bb3dbebf31e0720d65ce4170c9 Mon Sep 17 00:00:00 2001
+From f8ad9ce9fceec8ffa986ac44c52ead3f6adade1e Mon Sep 17 00:00:00 2001
 From: Gabor Juhos <juhosg@openwrt.org>
 Date: Sat, 13 Apr 2013 09:02:40 +0200
-Subject: [PATCH 116/137] DT: add documentation for the Ralink MIPS SoCs
+Subject: [PATCH 116/164] DT: add documentation for the Ralink MIPS SoCs
 
 This patch adds binding documentation for the
 compatible values of the Ralink MIPS SoCs.
@@ -15,6 +15,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5187/
  1 file changed, 18 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/mips/ralink.txt
 
+diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt
+new file mode 100644
+index 0000000..59b6a35
 --- /dev/null
 +++ b/Documentation/devicetree/bindings/mips/ralink.txt
 @@ -0,0 +1,18 @@
@@ -36,3 +39,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5187/
 +  ralink,mt7620a-soc
 +  ralink,mt7620n-soc
 +
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0117-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch b/target/linux/ramips/patches-3.9/0117-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch
index 1328b432a8..e21565d668 100644
--- a/target/linux/ramips/patches-3.8/0117-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch
+++ b/target/linux/ramips/patches-3.9/0117-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch
@@ -1,7 +1,7 @@
-From 7a30e00a278fe94ac8e42d0967ffde99d1ab74ee Mon Sep 17 00:00:00 2001
+From 0f26ec753f34e16e00d25c576a190765aedd62c9 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Thu, 21 Mar 2013 17:47:07 +0100
-Subject: [PATCH 117/137] DT: MIPS: ralink: clean up RT3050 dtsi and dts file
+Subject: [PATCH 117/164] DT: MIPS: ralink: clean up RT3050 dtsi and dts file
 
 * remove nodes for cores whose drivers are not upstream yet
 * add compat string for an additional soc
@@ -15,6 +15,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5186/
  arch/mips/ralink/dts/rt3052_eval.dts |   10 ++-----
  2 files changed, 4 insertions(+), 58 deletions(-)
 
+diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
+index 069d066..ef7da1e 100644
 --- a/arch/mips/ralink/dts/rt3050.dtsi
 +++ b/arch/mips/ralink/dts/rt3050.dtsi
 @@ -1,7 +1,7 @@
@@ -104,6 +106,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5186/
  		uartlite@c00 {
  			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
  			reg = <0xc00 0x100>;
+diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
+index 148a590..df17f5f 100644
 --- a/arch/mips/ralink/dts/rt3052_eval.dts
 +++ b/arch/mips/ralink/dts/rt3052_eval.dts
 @@ -3,8 +3,6 @@
@@ -115,3 +119,21 @@ Patchwork: http://patchwork.linux-mips.org/patch/5186/
  	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
  	model = "Ralink RT3052 evaluation board";
  
+@@ -12,12 +10,8 @@
+ 		reg = <0x0 0x2000000>;
+ 	};
+ 
+-	palmbus@10000000 {
+-		sysc@0 {
+-			ralink,pinmmux = "uartlite", "spi";
+-			ralink,uartmux = "gpio";
+-			ralink,wdtmux = <0>;
+-		};
++	chosen {
++		bootargs = "console=ttyS0,57600";
+ 	};
+ 
+ 	cfi@1f000000 {
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0118-DT-MIPS-ralink-add-RT2880-dts-files.patch b/target/linux/ramips/patches-3.9/0118-DT-MIPS-ralink-add-RT2880-dts-files.patch
new file mode 100644
index 0000000000..b47dec8c95
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0118-DT-MIPS-ralink-add-RT2880-dts-files.patch
@@ -0,0 +1,160 @@
+From f88ca014e92cf209c0e5b6f68b45e3ca0ada6c45 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 12 Apr 2013 06:27:37 +0000
+Subject: [PATCH 118/164] DT: MIPS: ralink: add RT2880 dts files
+
+Add a dtsi file for RT2880 SoC and a sample dts file.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Grant Likely <grant.likely@secretlab.ca>
+Patchwork: http://patchwork.linux-mips.org/patch/5188/
+---
+ arch/mips/ralink/Kconfig             |    4 +++
+ arch/mips/ralink/dts/Makefile        |    1 +
+ arch/mips/ralink/dts/rt2880.dtsi     |   58 ++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/dts/rt2880_eval.dts |   46 +++++++++++++++++++++++++++
+ 4 files changed, 109 insertions(+)
+ create mode 100644 arch/mips/ralink/dts/rt2880.dtsi
+ create mode 100644 arch/mips/ralink/dts/rt2880_eval.dts
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 86f6c77..2f6fbb8 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -34,6 +34,10 @@ choice
+ 	config DTB_RT_NONE
+ 		bool "None"
+ 
++	config DTB_RT2880_EVAL
++		bool "RT2880 eval kit"
++		depends on SOC_RT288X
++
+ 	config DTB_RT305X_EVAL
+ 		bool "RT305x eval kit"
+ 		depends on SOC_RT305X
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+index 1a69fb3..f635a01 100644
+--- a/arch/mips/ralink/dts/Makefile
++++ b/arch/mips/ralink/dts/Makefile
+@@ -1 +1,2 @@
++obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
+ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
+diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
+new file mode 100644
+index 0000000..182afde
+--- /dev/null
++++ b/arch/mips/ralink/dts/rt2880.dtsi
+@@ -0,0 +1,58 @@
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	compatible = "ralink,rt2880-soc";
++
++	cpus {
++		cpu@0 {
++			compatible = "mips,mips4KEc";
++		};
++	};
++
++	cpuintc: cpuintc@0 {
++		#address-cells = <0>;
++		#interrupt-cells = <1>;
++		interrupt-controller;
++		compatible = "mti,cpu-interrupt-controller";
++	};
++
++	palmbus@300000 {
++		compatible = "palmbus";
++		reg = <0x300000 0x200000>;
++                ranges = <0x0 0x300000 0x1FFFFF>;
++
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		sysc@0 {
++			compatible = "ralink,rt2880-sysc";
++			reg = <0x0 0x100>;
++		};
++
++		intc: intc@200 {
++			compatible = "ralink,rt2880-intc";
++			reg = <0x200 0x100>;
++
++			interrupt-controller;
++			#interrupt-cells = <1>;
++
++			interrupt-parent = <&cpuintc>;
++			interrupts = <2>;
++		};
++
++		memc@300 {
++			compatible = "ralink,rt2880-memc";
++			reg = <0x300 0x100>;
++		};
++
++		uartlite@c00 {
++			compatible = "ralink,rt2880-uart", "ns16550a";
++			reg = <0xc00 0x100>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <8>;
++
++			reg-shift = <2>;
++		};
++	};
++};
+diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
+new file mode 100644
+index 0000000..322d700
+--- /dev/null
++++ b/arch/mips/ralink/dts/rt2880_eval.dts
+@@ -0,0 +1,46 @@
++/dts-v1/;
++
++/include/ "rt2880.dtsi"
++
++/ {
++	compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
++	model = "Ralink RT2880 evaluation board";
++
++	memory@0 {
++		reg = <0x8000000 0x2000000>;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,57600";
++	};
++
++	cfi@1f000000 {
++		compatible = "cfi-flash";
++		reg = <0x1f000000 0x400000>;
++
++		bank-width = <2>;
++		device-width = <2>;
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		partition@0 {
++			label = "uboot";
++			reg = <0x0 0x30000>;
++			read-only;
++		};
++		partition@30000 {
++			label = "uboot-env";
++			reg = <0x30000 0x10000>;
++			read-only;
++		};
++		partition@40000 {
++			label = "calibration";
++			reg = <0x40000 0x10000>;
++			read-only;
++		};
++		partition@50000 {
++			label = "linux";
++			reg = <0x50000 0x3b0000>;
++		};
++	};
++};
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0119-DT-MIPS-ralink-add-RT3883-dts-files.patch b/target/linux/ramips/patches-3.9/0119-DT-MIPS-ralink-add-RT3883-dts-files.patch
new file mode 100644
index 0000000000..334ddee079
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0119-DT-MIPS-ralink-add-RT3883-dts-files.patch
@@ -0,0 +1,131 @@
+From 20c94bd844c5743d58ad8d8df81460e049f9df4b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 12 Apr 2013 06:27:39 +0000
+Subject: [PATCH 119/164] DT: MIPS: ralink: add RT3883 dts files
+
+Add a dtsi file for RT3883 SoC and a sample dts file.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Grant Likely <grant.likely@secretlab.ca>
+Patchwork: http://patchwork.linux-mips.org/patch/5189/
+---
+ arch/mips/ralink/Kconfig             |    4 +++
+ arch/mips/ralink/dts/Makefile        |    1 +
+ arch/mips/ralink/dts/rt3883.dtsi     |   58 ++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/dts/rt3883_eval.dts |   16 ++++++++++
+ 4 files changed, 79 insertions(+)
+ create mode 100644 arch/mips/ralink/dts/rt3883.dtsi
+ create mode 100644 arch/mips/ralink/dts/rt3883_eval.dts
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 2f6fbb8..493411f 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -42,6 +42,10 @@ choice
+ 		bool "RT305x eval kit"
+ 		depends on SOC_RT305X
+ 
++	config DTB_RT3883_EVAL
++		bool "RT3883 eval kit"
++		depends on SOC_RT3883
++
+ endchoice
+ 
+ endif
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+index f635a01..040a986 100644
+--- a/arch/mips/ralink/dts/Makefile
++++ b/arch/mips/ralink/dts/Makefile
+@@ -1,2 +1,3 @@
+ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
+ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
++obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
+diff --git a/arch/mips/ralink/dts/rt3883.dtsi b/arch/mips/ralink/dts/rt3883.dtsi
+new file mode 100644
+index 0000000..3b131dd
+--- /dev/null
++++ b/arch/mips/ralink/dts/rt3883.dtsi
+@@ -0,0 +1,58 @@
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	compatible = "ralink,rt3883-soc";
++
++	cpus {
++		cpu@0 {
++			compatible = "mips,mips74Kc";
++		};
++	};
++
++	cpuintc: cpuintc@0 {
++		#address-cells = <0>;
++		#interrupt-cells = <1>;
++		interrupt-controller;
++		compatible = "mti,cpu-interrupt-controller";
++	};
++
++	palmbus@10000000 {
++		compatible = "palmbus";
++		reg = <0x10000000 0x200000>;
++		ranges = <0x0 0x10000000 0x1FFFFF>;
++
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		sysc@0 {
++			compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
++			reg = <0x0 0x100>;
++		};
++
++		intc: intc@200 {
++			compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
++			reg = <0x200 0x100>;
++
++			interrupt-controller;
++			#interrupt-cells = <1>;
++
++			interrupt-parent = <&cpuintc>;
++			interrupts = <2>;
++		};
++
++		memc@300 {
++			compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
++			reg = <0x300 0x100>;
++		};
++
++		uartlite@c00 {
++			compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
++			reg = <0xc00 0x100>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <12>;
++
++			reg-shift = <2>;
++		};
++	};
++};
+diff --git a/arch/mips/ralink/dts/rt3883_eval.dts b/arch/mips/ralink/dts/rt3883_eval.dts
+new file mode 100644
+index 0000000..2fa6b33
+--- /dev/null
++++ b/arch/mips/ralink/dts/rt3883_eval.dts
+@@ -0,0 +1,16 @@
++/dts-v1/;
++
++/include/ "rt3883.dtsi"
++
++/ {
++	compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc";
++	model = "Ralink RT3883 evaluation board";
++
++	memory@0 {
++		reg = <0x0 0x2000000>;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,57600";
++	};
++};
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0120-DT-MIPS-ralink-add-MT7620A-dts-files.patch b/target/linux/ramips/patches-3.9/0120-DT-MIPS-ralink-add-MT7620A-dts-files.patch
new file mode 100644
index 0000000000..d96e10de9f
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0120-DT-MIPS-ralink-add-MT7620A-dts-files.patch
@@ -0,0 +1,132 @@
+From 248c7a2b678eee7da39363b1f097ea7eedceb435 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 12 Apr 2013 06:27:41 +0000
+Subject: [PATCH 120/164] DT: MIPS: ralink: add MT7620A dts files
+
+Add a dtsi file for MT7620A SoC and a sample dts file.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Acked-by: Grant Likely <grant.likely@secretlab.ca>
+Patchwork: http://patchwork.linux-mips.org/patch/5190/
+---
+ arch/mips/ralink/Kconfig              |    4 +++
+ arch/mips/ralink/dts/Makefile         |    1 +
+ arch/mips/ralink/dts/mt7620a.dtsi     |   58 +++++++++++++++++++++++++++++++++
+ arch/mips/ralink/dts/mt7620a_eval.dts |   16 +++++++++
+ 4 files changed, 79 insertions(+)
+ create mode 100644 arch/mips/ralink/dts/mt7620a.dtsi
+ create mode 100644 arch/mips/ralink/dts/mt7620a_eval.dts
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 493411f..026e823 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -46,6 +46,10 @@ choice
+ 		bool "RT3883 eval kit"
+ 		depends on SOC_RT3883
+ 
++	config DTB_MT7620A_EVAL
++		bool "MT7620A eval kit"
++		depends on SOC_MT7620
++
+ endchoice
+ 
+ endif
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+index 040a986..18194fa 100644
+--- a/arch/mips/ralink/dts/Makefile
++++ b/arch/mips/ralink/dts/Makefile
+@@ -1,3 +1,4 @@
+ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
+ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
+ obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
++obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
+diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi
+new file mode 100644
+index 0000000..08bf24f
+--- /dev/null
++++ b/arch/mips/ralink/dts/mt7620a.dtsi
+@@ -0,0 +1,58 @@
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	compatible = "ralink,mtk7620a-soc";
++
++	cpus {
++		cpu@0 {
++			compatible = "mips,mips24KEc";
++		};
++	};
++
++	cpuintc: cpuintc@0 {
++		#address-cells = <0>;
++		#interrupt-cells = <1>;
++		interrupt-controller;
++		compatible = "mti,cpu-interrupt-controller";
++	};
++
++	palmbus@10000000 {
++		compatible = "palmbus";
++		reg = <0x10000000 0x200000>;
++                ranges = <0x0 0x10000000 0x1FFFFF>;
++
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		sysc@0 {
++			compatible = "ralink,mt7620a-sysc";
++			reg = <0x0 0x100>;
++		};
++
++		intc: intc@200 {
++			compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
++			reg = <0x200 0x100>;
++
++			interrupt-controller;
++			#interrupt-cells = <1>;
++
++			interrupt-parent = <&cpuintc>;
++			interrupts = <2>;
++		};
++
++		memc@300 {
++			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
++			reg = <0x300 0x100>;
++		};
++
++		uartlite@c00 {
++			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
++			reg = <0xc00 0x100>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <12>;
++
++			reg-shift = <2>;
++		};
++	};
++};
+diff --git a/arch/mips/ralink/dts/mt7620a_eval.dts b/arch/mips/ralink/dts/mt7620a_eval.dts
+new file mode 100644
+index 0000000..35eb874
+--- /dev/null
++++ b/arch/mips/ralink/dts/mt7620a_eval.dts
+@@ -0,0 +1,16 @@
++/dts-v1/;
++
++/include/ "mt7620a.dtsi"
++
++/ {
++	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
++	model = "Ralink MT7620A evaluation board";
++
++	memory@0 {
++		reg = <0x0 0x2000000>;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,57600";
++	};
++};
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0121-MIPS-add-detect_memory_region.patch b/target/linux/ramips/patches-3.9/0121-MIPS-add-detect_memory_region.patch
new file mode 100644
index 0000000000..90ca369901
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0121-MIPS-add-detect_memory_region.patch
@@ -0,0 +1,68 @@
+From 2ccca2ac0b54eb21890412c888cf5a5bda656bba Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 13 Apr 2013 13:15:47 +0200
+Subject: [PATCH 121/164] MIPS: add detect_memory_region()
+
+Add a generic way of detecting the available RAM. This function is based on the
+implementation already used by ath79.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5178/
+---
+ arch/mips/include/asm/bootinfo.h |    1 +
+ arch/mips/kernel/setup.c         |   20 ++++++++++++++++++++
+ 2 files changed, 21 insertions(+)
+
+diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
+index b71dd5b..4d2cdea 100644
+--- a/arch/mips/include/asm/bootinfo.h
++++ b/arch/mips/include/asm/bootinfo.h
+@@ -104,6 +104,7 @@ struct boot_mem_map {
+ extern struct boot_mem_map boot_mem_map;
+ 
+ extern void add_memory_region(phys_t start, phys_t size, long type);
++extern void detect_memory_region(phys_t start, phys_t sz_min,  phys_t sz_max);
+ 
+ extern void prom_init(void);
+ extern void prom_free_prom_memory(void);
+diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
+index 4c774d5..7325793 100644
+--- a/arch/mips/kernel/setup.c
++++ b/arch/mips/kernel/setup.c
+@@ -23,6 +23,7 @@
+ #include <linux/pfn.h>
+ #include <linux/debugfs.h>
+ #include <linux/kexec.h>
++#include <linux/sizes.h>
+ 
+ #include <asm/addrspace.h>
+ #include <asm/bootinfo.h>
+@@ -122,6 +123,25 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
+ 	boot_mem_map.nr_map++;
+ }
+ 
++void __init detect_memory_region(phys_t start, phys_t sz_min, phys_t sz_max)
++{
++	phys_t size;
++
++	for (size = sz_min; size < sz_max; size <<= 1) {
++		if (!memcmp(detect_memory_region,
++				detect_memory_region + size, 1024))
++			break;
++	}
++
++	pr_debug("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n",
++		((unsigned long long) size) / SZ_1M,
++		(unsigned long long) start,
++		((unsigned long long) sz_min) / SZ_1M,
++		((unsigned long long) sz_max) / SZ_1M);
++
++	add_memory_region(start, size, BOOT_MEM_RAM);
++}
++
+ static void __init print_memory_map(void)
+ {
+ 	int i;
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0122-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch b/target/linux/ramips/patches-3.9/0122-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch
index 3454a5ba56..25e0711eb1 100644
--- a/target/linux/ramips/patches-3.8/0122-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch
+++ b/target/linux/ramips/patches-3.9/0122-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch
@@ -1,7 +1,7 @@
-From 5155790ed1f270379ea98325f01e1c72a36a37d0 Mon Sep 17 00:00:00 2001
+From 438579e0fd477cec8584bdf012ea51cf4ad8e05c Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 13 Apr 2013 15:10:14 +0200
-Subject: [PATCH 122/137] MIPS: ralink: add memory definition to struct
+Subject: [PATCH 122/164] MIPS: ralink: add memory definition to struct
  ralink_soc_info
 
 Depending on the actual SoC we have a different base address as well as minimum
@@ -13,9 +13,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5179/
  arch/mips/ralink/common.h |    5 +++++
  1 file changed, 5 insertions(+)
 
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index 299119b..83144c3 100644
 --- a/arch/mips/ralink/common.h
 +++ b/arch/mips/ralink/common.h
-@@ -33,6 +33,11 @@ extern struct ralink_pinmux rt_gpio_pinm
+@@ -33,6 +33,11 @@ extern struct ralink_pinmux rt_gpio_pinmux;
  struct ralink_soc_info {
  	unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
  	unsigned char *compatible;
@@ -27,3 +29,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5179/
  };
  extern struct ralink_soc_info soc_info;
  
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0123-MIPS-ralink-add-memory-definition-for-RT305x.patch b/target/linux/ramips/patches-3.9/0123-MIPS-ralink-add-memory-definition-for-RT305x.patch
index bf6d7f388d..0921629c22 100644
--- a/target/linux/ramips/patches-3.8/0123-MIPS-ralink-add-memory-definition-for-RT305x.patch
+++ b/target/linux/ramips/patches-3.9/0123-MIPS-ralink-add-memory-definition-for-RT305x.patch
@@ -1,7 +1,7 @@
-From 016f1f659cf70cc78e72e12a2130d8f3e1a6e0d3 Mon Sep 17 00:00:00 2001
+From 1a255c5e67baad1735f985ad818d2b970fcc6808 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 13 Apr 2013 15:13:40 +0200
-Subject: [PATCH 123/137] MIPS: ralink: add memory definition for RT305x
+Subject: [PATCH 123/164] MIPS: ralink: add memory definition for RT305x
 
 Populate struct soc_info with the data that describes our RAM window.
 
@@ -15,6 +15,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5180/
  arch/mips/ralink/rt305x.c                  |   45 ++++++++++++++++++++++++++++
  2 files changed, 51 insertions(+)
 
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
+index 80cda8a..069bf37 100644
 --- a/arch/mips/include/asm/mach-ralink/rt305x.h
 +++ b/arch/mips/include/asm/mach-ralink/rt305x.h
 @@ -157,4 +157,10 @@ static inline int soc_is_rt5350(void)
@@ -28,6 +30,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5180/
 +#define RT3352_MEM_SIZE_MAX		256
 +
  #endif
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index 6aa3cb1..ca7ee3a 100644
 --- a/arch/mips/ralink/rt305x.c
 +++ b/arch/mips/ralink/rt305x.c
 @@ -122,6 +122,40 @@ struct ralink_pinmux rt_gpio_pinmux = {
@@ -65,13 +69,13 @@ Patchwork: http://patchwork.linux-mips.org/patch/5180/
 +		break;
 +	}
 +
-+	return ret * 1024 * 1024;
++	return ret;
 +}
 +
  void __init ralink_clk_init(void)
  {
  	unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
-@@ -252,4 +286,15 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -252,4 +286,15 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
  		name,
  		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
  		(id & CHIP_ID_REV_MASK));
@@ -87,3 +91,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5180/
 +		soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
 +	}
  }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0124-MIPS-ralink-add-memory-definition-for-RT2880.patch b/target/linux/ramips/patches-3.9/0124-MIPS-ralink-add-memory-definition-for-RT2880.patch
index 975fb48a4b..43adf86a39 100644
--- a/target/linux/ramips/patches-3.8/0124-MIPS-ralink-add-memory-definition-for-RT2880.patch
+++ b/target/linux/ramips/patches-3.9/0124-MIPS-ralink-add-memory-definition-for-RT2880.patch
@@ -1,7 +1,7 @@
-From 0151f5f0dbf43b6b3718b0d1d403c87429ac0313 Mon Sep 17 00:00:00 2001
+From 45529406ea5b481da5986e0a14ae26a8c103691b Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 13 Apr 2013 15:37:37 +0200
-Subject: [PATCH 124/137] MIPS: ralink: add memory definition for RT2880
+Subject: [PATCH 124/164] MIPS: ralink: add memory definition for RT2880
 
 Populate struct soc_info with the data that describes our RAM window.
 
@@ -12,6 +12,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5181/
  arch/mips/ralink/rt288x.c                  |    4 ++++
  2 files changed, 8 insertions(+)
 
+diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h
+index ad8b42d..03ad716 100644
 --- a/arch/mips/include/asm/mach-ralink/rt288x.h
 +++ b/arch/mips/include/asm/mach-ralink/rt288x.h
 @@ -46,4 +46,8 @@
@@ -23,9 +25,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5181/
 +#define RT2880_MEM_SIZE_MAX		128
 +
  #endif
+diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
+index 1e0788e..f87de1a 100644
 --- a/arch/mips/ralink/rt288x.c
 +++ b/arch/mips/ralink/rt288x.c
-@@ -136,4 +136,8 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -136,4 +136,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
  		name,
  		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
  		(id & CHIP_ID_REV_MASK));
@@ -34,3 +38,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5181/
 +	soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
 +	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
  }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0125-MIPS-ralink-add-memory-definition-for-RT3883.patch b/target/linux/ramips/patches-3.9/0125-MIPS-ralink-add-memory-definition-for-RT3883.patch
index 2c015ad24d..ab25311075 100644
--- a/target/linux/ramips/patches-3.8/0125-MIPS-ralink-add-memory-definition-for-RT3883.patch
+++ b/target/linux/ramips/patches-3.9/0125-MIPS-ralink-add-memory-definition-for-RT3883.patch
@@ -1,20 +1,30 @@
-From de85c6c3e2d5ed9c721a282d91af504a845e1fad Mon Sep 17 00:00:00 2001
+From d771f446558ef408ca97c391887ae843dd23c358 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 13 Apr 2013 20:23:19 +0200
-Subject: [PATCH 125/137] MIPS: ralink: add memory definition for RT3883
+Subject: [PATCH 125/164] MIPS: ralink: add memory definition for RT3883
 
 Populate struct soc_info with the data that describes our RAM window.
 
 Signed-off-by: John Crispin <blogic@openwrt.org>
 Patchwork: http://patchwork.linux-mips.org/patch/5182/
 ---
- arch/mips/include/asm/mach-ralink/rt3883.h |    4 ++++
+ arch/mips/include/asm/mach-ralink/rt3883.h |    5 +++++
  arch/mips/ralink/rt3883.c                  |    4 ++++
- 2 files changed, 8 insertions(+)
+ 2 files changed, 9 insertions(+)
 
+diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
+index b91c6c1..058382f 100644
 --- a/arch/mips/include/asm/mach-ralink/rt3883.h
 +++ b/arch/mips/include/asm/mach-ralink/rt3883.h
-@@ -245,4 +245,8 @@
+@@ -152,6 +152,7 @@
+ #define RT3883_GPIO_SPI_MISO		6
+ #define RT3883_GPIO_7			7
+ #define RT3883_GPIO_10			10
++#define RT3883_GPIO_11			11
+ #define RT3883_GPIO_14			14
+ #define RT3883_GPIO_UART1_TXD		15
+ #define RT3883_GPIO_UART1_RXD		16
+@@ -244,4 +245,8 @@
  #define RT3883_FLASH_CFG_WIDTH_16BIT	0x1
  #define RT3883_FLASH_CFG_WIDTH_32BIT	0x2
  
@@ -23,9 +33,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5182/
 +#define RT3883_MEM_SIZE_MAX		256
 +
  #endif /* _RT3883_REGS_H_ */
+diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
+index 2d90aa9..afbf2ce 100644
 --- a/arch/mips/ralink/rt3883.c
 +++ b/arch/mips/ralink/rt3883.c
-@@ -239,4 +239,8 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -239,4 +239,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
  		name,
  		(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
  		(id & RT3883_REVID_ECO_ID_MASK));
@@ -34,3 +46,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5182/
 +	soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
 +	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
  }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0126-MIPS-ralink-add-memory-definition-for-MT7620.patch b/target/linux/ramips/patches-3.9/0126-MIPS-ralink-add-memory-definition-for-MT7620.patch
index b36ab33071..001483873d 100644
--- a/target/linux/ramips/patches-3.8/0126-MIPS-ralink-add-memory-definition-for-MT7620.patch
+++ b/target/linux/ramips/patches-3.9/0126-MIPS-ralink-add-memory-definition-for-MT7620.patch
@@ -1,7 +1,7 @@
-From c1d35c42d697e9c28c817921a79c5f814529a4c6 Mon Sep 17 00:00:00 2001
+From 0c6c7304e33f3decff3293739076f29314ce535e Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 14 Apr 2013 09:55:29 +0200
-Subject: [PATCH 126/137] MIPS: ralink: add memory definition for MT7620
+Subject: [PATCH 126/164] MIPS: ralink: add memory definition for MT7620
 
 Populate struct soc_info with the data that describes our RAM window.
 
@@ -12,6 +12,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5183/
  arch/mips/ralink/mt7620.c                  |   20 ++++++++++++++++++++
  2 files changed, 28 insertions(+)
 
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index b272649..9809972 100644
 --- a/arch/mips/include/asm/mach-ralink/mt7620.h
 +++ b/arch/mips/include/asm/mach-ralink/mt7620.h
 @@ -50,6 +50,14 @@
@@ -29,9 +31,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/5183/
  #define MT7620_GPIO_MODE_I2C		BIT(0)
  #define MT7620_GPIO_MODE_UART0_SHIFT	2
  #define MT7620_GPIO_MODE_UART0_MASK	0x7
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index eb00ab8..98ddb93 100644
 --- a/arch/mips/ralink/mt7620.c
 +++ b/arch/mips/ralink/mt7620.c
-@@ -211,4 +211,24 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -211,4 +211,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
  
  	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
  	dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
@@ -56,3 +60,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5183/
 +	}
 +	soc_info->mem_base = MT7620_DRAM_BASE;
  }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0127-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch b/target/linux/ramips/patches-3.9/0127-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch
index 59bdaddbe5..a1eae9007f 100644
--- a/target/linux/ramips/patches-3.8/0127-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch
+++ b/target/linux/ramips/patches-3.9/0127-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch
@@ -1,7 +1,7 @@
-From 1618a00f709817cbcdebf038d0b5e251c8d67237 Mon Sep 17 00:00:00 2001
+From 550797902b0285736caceaf3c01506077d5440ea Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 13 Apr 2013 15:15:51 +0200
-Subject: [PATCH 127/137] MIPS: ralink: make use of the new memory detection
+Subject: [PATCH 127/164] MIPS: ralink: make use of the new memory detection
  code
 
 Call detect_memory_region() from plat_mem_setup() unless the size was already
@@ -13,6 +13,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5184/
  arch/mips/ralink/of.c |    9 +++++++++
  1 file changed, 9 insertions(+)
 
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index 4165e70..fb15695 100644
 --- a/arch/mips/ralink/of.c
 +++ b/arch/mips/ralink/of.c
 @@ -11,6 +11,7 @@
@@ -38,3 +40,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5184/
  }
  
  static int __init plat_of_setup(void)
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0128-MIPS-ralink-upstream-v3.10.patch b/target/linux/ramips/patches-3.9/0128-MIPS-ralink-upstream-v3.10.patch
new file mode 100644
index 0000000000..105ef3eee8
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0128-MIPS-ralink-upstream-v3.10.patch
@@ -0,0 +1,23 @@
+From b3c76fc6b7be5aa2514a268e405e9b6e1c3ebcf0 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 30 May 2013 16:16:13 +0200
+Subject: [PATCH 128/164] MIPS: ralink: upstream v3.10
+
+patches prior to this were sent upstream and accepted for v3.10
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ dummy |    1 +
+ 1 file changed, 1 insertion(+)
+ create mode 100644 dummy
+
+diff --git a/dummy b/dummy
+new file mode 100644
+index 0000000..421376d
+--- /dev/null
++++ b/dummy
+@@ -0,0 +1 @@
++dummy
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0129-MIPS-ralink-add-pinmux-driver.patch b/target/linux/ramips/patches-3.9/0129-MIPS-ralink-add-pinmux-driver.patch
new file mode 100644
index 0000000000..c51a4f4215
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0129-MIPS-ralink-add-pinmux-driver.patch
@@ -0,0 +1,141 @@
+From 596c13f9c14edfe1ed71fe64274825c1978c964c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Apr 2013 23:11:42 +0200
+Subject: [PATCH 129/164] MIPS: ralink: add pinmux driver
+
+Add code to setup the pinmux on ralonk SoC. The SoC has a single 32 bit register
+for this functionality with simple on/off bits. Building a full featured pinctrl
+driver would be overkill.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Makefile |    2 +-
+ arch/mips/ralink/common.h |    2 ++
+ arch/mips/ralink/of.c     |    2 ++
+ arch/mips/ralink/pinmux.c |   77 +++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 82 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/ralink/pinmux.c
+
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 38cf1a8..341b4de 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -6,7 +6,7 @@
+ # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+ # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ 
+-obj-y := prom.o of.o reset.o clk.o irq.o
++obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o
+ 
+ obj-$(CONFIG_SOC_RT288X) += rt288x.o
+ obj-$(CONFIG_SOC_RT305X) += rt305x.o
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index 83144c3..f113fd6 100644
+--- a/arch/mips/ralink/common.h
++++ b/arch/mips/ralink/common.h
+@@ -50,4 +50,6 @@ extern void prom_soc_init(struct ralink_soc_info *soc_info);
+ 
+ __iomem void *plat_of_remap_node(const char *node);
+ 
++void ralink_pinmux(void);
++
+ #endif /* _RALINK_COMMON_H__ */
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index fb15695..f916774 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -110,6 +110,8 @@ static int __init plat_of_setup(void)
+ 	if (of_platform_populate(NULL, of_ids, NULL, NULL))
+ 		panic("failed to populate DT\n");
+ 
++	ralink_pinmux();
++
+ 	return 0;
+ }
+ 
+diff --git a/arch/mips/ralink/pinmux.c b/arch/mips/ralink/pinmux.c
+new file mode 100644
+index 0000000..1720216
+--- /dev/null
++++ b/arch/mips/ralink/pinmux.c
+@@ -0,0 +1,77 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/of.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "common.h"
++
++#define SYSC_REG_GPIO_MODE	0x60
++
++static int ralink_mux_mask(const char *name, struct ralink_pinmux_grp *grps, u32* mask)
++{
++	for (; grps && grps->name; grps++)
++		if (!strcmp(grps->name, name)) {
++			*mask = grps->mask;
++			return 0;
++		}
++
++	return -1;
++}
++
++void ralink_pinmux(void)
++{
++	const __be32 *wdt;
++	struct device_node *np;
++	struct property *prop;
++	const char *uart, *pin;
++	u32 mode = 0;
++	int m;
++
++	np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-sysc");
++	if (!np)
++		return;
++
++	of_property_for_each_string(np, "ralink,gpiomux", prop, pin) {
++		if (!ralink_mux_mask(pin, rt_gpio_pinmux.mode, &m)) {
++			mode |= m;
++			pr_debug("pinmux: registered gpiomux \"%s\"\n", pin);
++		} else {
++			pr_err("pinmux: failed to load \"%s\"\n", pin);
++		}
++	}
++
++	of_property_for_each_string(np, "ralink,pinmux", prop, pin) {
++		if (!ralink_mux_mask(pin, rt_gpio_pinmux.mode, &m)) {
++			mode &= ~m;
++			pr_debug("pinmux: registered pinmux \"%s\"\n", pin);
++		} else {
++			pr_err("pinmux: failed to load group \"%s\"\n", pin);
++		}
++	}
++
++	of_property_read_string(np, "ralink,uartmux", &uart);
++	if (uart) {
++		mode &= ~(rt_gpio_pinmux.uart_mask << rt_gpio_pinmux.uart_shift);
++		if (ralink_mux_mask(uart, rt_gpio_pinmux.uart, &m)) {
++			pr_err("pinmux: failed to load uartmux \"%s\"\n", uart);
++			mode |= rt_gpio_pinmux.uart_mask << rt_gpio_pinmux.uart_shift;
++		} else {
++			mode |= m << rt_gpio_pinmux.uart_shift;
++			pr_debug("pinmux: registered uartmux \"%s\"\n", uart);
++		}
++	}
++
++	wdt = of_get_property(np, "ralink,wdtmux", NULL);
++	if (wdt && *wdt && rt_gpio_pinmux.wdt_reset)
++		rt_gpio_pinmux.wdt_reset();
++
++	rt_sysc_w32(mode, SYSC_REG_GPIO_MODE);
++}
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0129-MIPS-ralink-add-support-for-periodic-timer-irq.patch b/target/linux/ramips/patches-3.9/0130-MIPS-ralink-add-support-for-periodic-timer-irq.patch
index 6664e11e45..d2b318712c 100644
--- a/target/linux/ramips/patches-3.8/0129-MIPS-ralink-add-support-for-periodic-timer-irq.patch
+++ b/target/linux/ramips/patches-3.9/0130-MIPS-ralink-add-support-for-periodic-timer-irq.patch
@@ -1,7 +1,7 @@
-From 1f307fd0fdca585d5c7c32963e8a8a6f38d8a78c Mon Sep 17 00:00:00 2001
+From f8496dd6c8fbcfd159390c31791fe2a86e48acb9 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 23 Mar 2013 19:44:41 +0100
-Subject: [PATCH 129/137] MIPS: ralink: add support for periodic timer irq
+Subject: [PATCH 130/164] MIPS: ralink: add support for periodic timer irq
 
 Adds a driver for the periodic timer found on Ralink SoC.
 
@@ -12,6 +12,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  2 files changed, 193 insertions(+), 1 deletion(-)
  create mode 100644 arch/mips/ralink/timer.c
 
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 341b4de..cae7d88 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -6,7 +6,7 @@
@@ -23,6 +25,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  obj-$(CONFIG_SOC_RT288X) += rt288x.o
  obj-$(CONFIG_SOC_RT305X) += rt305x.o
+diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
+new file mode 100644
+index 0000000..0a6856c
 --- /dev/null
 +++ b/arch/mips/ralink/timer.c
 @@ -0,0 +1,192 @@
@@ -218,3 +223,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +MODULE_DESCRIPTION("Ralink RT2880 timer");
 +MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
 +MODULE_LICENSE("GPL");
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0131-MIPS-ralink-add-rt_sysc_m32-helper.patch b/target/linux/ramips/patches-3.9/0131-MIPS-ralink-add-rt_sysc_m32-helper.patch
new file mode 100644
index 0000000000..671838d8a0
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0131-MIPS-ralink-add-rt_sysc_m32-helper.patch
@@ -0,0 +1,31 @@
+From d685ede166d4ab4f098c2a334e0d03854522f507 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 19 May 2013 00:42:23 +0200
+Subject: [PATCH 131/164] MIPS: ralink: add rt_sysc_m32 helper
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/ralink_regs.h |    7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
+index 5a508f9..bd93014 100644
+--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
++++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
+@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned reg)
+ 	return __raw_readl(rt_sysc_membase + reg);
+ }
+ 
++static inline void rt_sysc_m32(u32 clr, u32 set, unsigned reg)
++{
++	u32 val = rt_sysc_r32(reg) & ~clr;
++
++	__raw_writel(val | set, rt_sysc_membase + reg);
++}
++
+ static inline void rt_memc_w32(u32 val, unsigned reg)
+ {
+ 	__raw_writel(val, rt_memc_membase + reg);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0132-MIPS-ralink-make-mt7620-ram-detect-verbose.patch b/target/linux/ramips/patches-3.9/0132-MIPS-ralink-make-mt7620-ram-detect-verbose.patch
new file mode 100644
index 0000000000..e98a254dd4
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0132-MIPS-ralink-make-mt7620-ram-detect-verbose.patch
@@ -0,0 +1,39 @@
+From eb6f94f9d53a0eecf0ff8edd5318ee2dd5403a01 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 20 May 2013 20:30:11 +0200
+Subject: [PATCH 132/164] MIPS: ralink: make mt7620 ram detect verbose
+
+Make the code print which of SDRAM, DDR1 or DDR2 was detected.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c |    3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 98ddb93..28350d0 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -214,16 +214,19 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ 
+ 	switch (dram_type) {
+ 	case SYSCFG0_DRAM_TYPE_SDRAM:
++		pr_info("Board has SDRAM\n");
+ 		soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
+ 		soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
+ 		break;
+ 
+ 	case SYSCFG0_DRAM_TYPE_DDR1:
++		pr_info("Board has DDR1\n");
+ 		soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+ 		soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+ 		break;
+ 
+ 	case SYSCFG0_DRAM_TYPE_DDR2:
++		pr_info("Board has DDR2\n");
+ 		soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+ 		soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+ 		break;
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0133-MIPS-ralink-add-verbose-pmu-info.patch b/target/linux/ramips/patches-3.9/0133-MIPS-ralink-add-verbose-pmu-info.patch
new file mode 100644
index 0000000000..5b9ac944a7
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0133-MIPS-ralink-add-verbose-pmu-info.patch
@@ -0,0 +1,64 @@
+From c7150f86dfb0fe2613af3c5bd1c0c587130b9460 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 20 May 2013 20:57:09 +0200
+Subject: [PATCH 133/164] MIPS: ralink: add verbose pmu info
+
+Print the PMU and LDO settings on boot.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c |   26 ++++++++++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 28350d0..69729a5 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -20,6 +20,22 @@
+ 
+ #include "common.h"
+ 
++/* analog */
++#define PMU0_CFG		0x88
++#define PMU_SW_SET		BIT(28)
++#define A_DCDC_EN		BIT(24)
++#define A_SSC_PERI		BIT(19)
++#define A_SSC_GEN		BIT(18)
++#define A_SSC_M			0x3
++#define A_SSC_S			16
++#define A_DLY_M			0x7
++#define A_DLY_S			8
++#define A_VTUNE_M		0xff
++
++/* digital */
++#define PMU1_CFG		0x8C
++#define DIG_SW_SEL		BIT(25)
++
+ /* does the board have sdram or ddram */
+ static int dram_type;
+ 
+@@ -187,6 +203,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ 	u32 n1;
+ 	u32 rev;
+ 	u32 cfg0;
++	u32 pmu0;
++	u32 pmu1;
+ 
+ 	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ 	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+@@ -234,4 +252,12 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ 		BUG();
+ 	}
+ 	soc_info->mem_base = MT7620_DRAM_BASE;
++
++	pmu0 = __raw_readl(sysc + PMU0_CFG);
++	pmu1 = __raw_readl(sysc + PMU1_CFG);
++
++	pr_info("Analog PMU set to %s control\n",
++		(pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
++	pr_info("Digital PMU set to %s control\n",
++		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+ }
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0134-MIPS-ralink-adds-a-bootrom-dumper-module.patch b/target/linux/ramips/patches-3.9/0134-MIPS-ralink-adds-a-bootrom-dumper-module.patch
new file mode 100644
index 0000000000..602cf40a54
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0134-MIPS-ralink-adds-a-bootrom-dumper-module.patch
@@ -0,0 +1,83 @@
+From 9dc3dba1bd621fe0e502d1d6efdfd64a0259a342 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 May 2013 15:50:31 +0200
+Subject: [PATCH 134/164] MIPS: ralink: adds a bootrom dumper module
+
+This patch adds a trivial driver that allows userland to extract the bootrom of
+a SoC via debugfs.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Makefile  |    2 ++
+ arch/mips/ralink/bootrom.c |   48 ++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 50 insertions(+)
+ create mode 100644 arch/mips/ralink/bootrom.c
+
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index cae7d88..5fa6129 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -15,4 +15,6 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o
+ 
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+ 
++obj-$(CONFIG_DEBUG_FS) += bootrom.o
++
+ obj-y += dts/
+diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c
+new file mode 100644
+index 0000000..f926f6f
+--- /dev/null
++++ b/arch/mips/ralink/bootrom.c
+@@ -0,0 +1,48 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/debugfs.h>
++#include <linux/seq_file.h>
++
++#define BOOTROM_OFFSET	0x10118000
++#define BOOTROM_SIZE	0x8000
++
++static void __iomem *membase = (void __iomem*) KSEG1ADDR(BOOTROM_OFFSET);
++
++static int bootrom_show(struct seq_file *s, void *unused)
++{
++	seq_write(s, membase, BOOTROM_SIZE);
++
++	return 0;
++}
++
++static int bootrom_open(struct inode *inode, struct file *file)
++{
++	return single_open(file, bootrom_show, NULL);
++}
++
++static const struct file_operations bootrom_file_ops = {
++	.open		= bootrom_open,
++	.read		= seq_read,
++	.llseek		= seq_lseek,
++	.release	= single_release,
++};
++
++static int bootrom_setup(void)
++{
++	if (!debugfs_create_file("bootrom", 0444,
++			NULL, NULL, &bootrom_file_ops)) {
++		pr_err("Failed to create bootrom debugfs file\n");
++
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++postcore_initcall(bootrom_setup);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0135-MIPS-ralink-add-missing-SZ_1M-multiplier.patch b/target/linux/ramips/patches-3.9/0135-MIPS-ralink-add-missing-SZ_1M-multiplier.patch
new file mode 100644
index 0000000000..2d5c71f539
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0135-MIPS-ralink-add-missing-SZ_1M-multiplier.patch
@@ -0,0 +1,29 @@
+From 4a8fcf59741a8b71f97823c31d461fa6d9089cb0 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 May 2013 17:15:54 +0200
+Subject: [PATCH 135/164] MIPS: ralink: add missing SZ_1M multiplier
+
+On RT5350 the memory size is set to Bytes and not MegaBytes due to a missing
+multiplier.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index f916774..b25c1f2 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -88,7 +88,7 @@ void __init plat_mem_setup(void)
+ 	__dt_setup_arch(&__dtb_start);
+ 
+ 	if (soc_info.mem_size)
+-		add_memory_region(soc_info.mem_base, soc_info.mem_size,
++		add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
+ 				  BOOT_MEM_RAM);
+ 	else
+ 		detect_memory_region(soc_info.mem_base,
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0136-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-3.9/0136-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
new file mode 100644
index 0000000000..21ab341513
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0136-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
@@ -0,0 +1,78 @@
+From 4977695198a8daf06746cb6c499d754040b6d0ac Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 3 May 2013 00:04:58 +0200
+Subject: [PATCH 136/164] MIPS: use set_mode() to enable/disable the cevt-r4k
+ irq
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/kernel/cevt-r4k.c |   39 ++++++++++++++++++++++++++-------------
+ 1 file changed, 26 insertions(+), 13 deletions(-)
+
+diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
+index 07b847d..d5d94e5 100644
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -39,12 +39,6 @@ static int mips_next_event(unsigned long delta,
+ 
+ #endif /* CONFIG_MIPS_MT_SMTC */
+ 
+-void mips_set_clock_mode(enum clock_event_mode mode,
+-				struct clock_event_device *evt)
+-{
+-	/* Nothing to do ...  */
+-}
+-
+ DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+ int cp0_timer_irq_installed;
+ 
+@@ -89,6 +83,32 @@ struct irqaction c0_compare_irqaction = {
+ 	.name = "timer",
+ };
+ 
++void mips_set_clock_mode(enum clock_event_mode mode,
++				struct clock_event_device *evt)
++{
++	switch (mode) {
++	case CLOCK_EVT_MODE_ONESHOT:
++		if (cp0_timer_irq_installed)
++			break;
++
++		cp0_timer_irq_installed = 1;
++
++		setup_irq(evt->irq, &c0_compare_irqaction);
++		break;
++
++	case CLOCK_EVT_MODE_SHUTDOWN:
++		if (!cp0_timer_irq_installed)
++			break;
++
++		cp0_timer_irq_installed = 0;
++		free_irq(evt->irq, &c0_compare_irqaction);
++		break;
++
++	default:
++		pr_err("Unhandeled mips clock_mode\n");
++		break;
++	}
++}
+ 
+ void mips_event_handler(struct clock_event_device *dev)
+ {
+@@ -208,13 +228,6 @@ int __cpuinit r4k_clockevent_init(void)
+ 
+ 	clockevents_register_device(cd);
+ 
+-	if (cp0_timer_irq_installed)
+-		return 0;
+-
+-	cp0_timer_irq_installed = 1;
+-
+-	setup_irq(irq, &c0_compare_irqaction);
+-
+ 	return 0;
+ }
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0137-MIPS-ralink-add-illegal-access-driver.patch b/target/linux/ramips/patches-3.9/0137-MIPS-ralink-add-illegal-access-driver.patch
new file mode 100644
index 0000000000..670b20052a
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0137-MIPS-ralink-add-illegal-access-driver.patch
@@ -0,0 +1,121 @@
+From 0402961539c5a98f3e9eac439e03f89498d110a1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 16 May 2013 23:28:23 +0200
+Subject: [PATCH 137/164] MIPS: ralink: add illegal access driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Makefile  |    2 +-
+ arch/mips/ralink/ill_acc.c |   87 ++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 88 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/ralink/ill_acc.c
+
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 5fa6129..55a5bfc 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -6,7 +6,7 @@
+ # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+ # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ 
+-obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o
++obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o ill_acc.o
+ 
+ obj-$(CONFIG_SOC_RT288X) += rt288x.o
+ obj-$(CONFIG_SOC_RT305X) += rt305x.o
+diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
+new file mode 100644
+index 0000000..4a3f696
+--- /dev/null
++++ b/arch/mips/ralink/ill_acc.c
+@@ -0,0 +1,87 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/interrupt.h>
++#include <linux/of_platform.h>
++#include <linux/of_irq.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define REG_ILL_ACC_ADDR	0x10
++#define REG_ILL_ACC_TYPE	0x14
++
++#define ILL_INT_STATUS		BIT(31)
++#define ILL_ACC_WRITE		BIT(30)
++#define ILL_ACC_LEN_M		0xff
++#define ILL_ACC_OFF_M		0xf
++#define ILL_ACC_OFF_S		16
++#define ILL_ACC_ID_M		0x7
++#define ILL_ACC_ID_S		8
++
++#define	DRV_NAME		"ill_acc"
++
++static const char *ill_acc_ids[] = {
++	"cpu", "dma", "ppe", "pdma rx","pdma tx", "pci/e", "wmac", "usb",
++};
++
++static irqreturn_t ill_acc_irq_handler(int irq, void *_priv)
++{
++	struct device *dev = (struct device *) _priv;
++	u32 addr = rt_memc_r32(REG_ILL_ACC_ADDR);
++	u32 type = rt_memc_r32(REG_ILL_ACC_TYPE);
++
++	dev_err(dev, "illegal %s access from %s - addr:0x%08x offset:%d len:%d\n",
++		(type & ILL_ACC_WRITE) ? ("write") : ("read"),
++		ill_acc_ids[(type >> ILL_ACC_ID_S) & ILL_ACC_ID_M],
++		addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
++		type & ILL_ACC_LEN_M);
++
++	rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
++
++	return IRQ_HANDLED;
++}
++
++static int __init ill_acc_of_setup(void)
++{
++	struct platform_device *pdev;
++	struct device_node *np;
++	int irq;
++
++	/* somehow this driver breaks on RT5350 */
++	if (of_machine_is_compatible("ralink,rt5350-soc"))
++		return -EINVAL;
++
++	np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-memc");
++	if (!np)
++		return -EINVAL;
++
++	pdev = of_find_device_by_node(np);
++	if (!pdev) {
++		pr_err("%s: failed to lookup pdev\n", np->name);
++		return -EINVAL;
++	}
++
++	irq = irq_of_parse_and_map(np, 0);
++        if (!irq) {
++		dev_err(&pdev->dev, "failed to get irq\n");
++		return -EINVAL;
++	}
++
++	if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
++		dev_err(&pdev->dev, "failed to request irq\n");
++		return -EINVAL;
++	}
++
++	rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
++
++	dev_info(&pdev->dev, "irq registered\n");
++
++	return 0;
++}
++
++arch_initcall(ill_acc_of_setup);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0138-MIPS-ralink-workaround-DTB-memory-issue.patch b/target/linux/ramips/patches-3.9/0138-MIPS-ralink-workaround-DTB-memory-issue.patch
new file mode 100644
index 0000000000..dc113bd143
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0138-MIPS-ralink-workaround-DTB-memory-issue.patch
@@ -0,0 +1,29 @@
+From bcffa7a81e00b8f67c459a2f5526edc0a5077794 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 23 May 2013 18:50:56 +0200
+Subject: [PATCH 138/164] MIPS: ralink: workaround DTB memory issue
+
+If the DTB is too big a bug happens on boot when init ram is freed.
+This is a temporary fix until the real cause is found.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index b25c1f2..8efb02b 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -74,7 +74,7 @@ void __init device_tree_init(void)
+ 	unflatten_device_tree();
+ 
+ 	/* free the space reserved for the dt blob */
+-	free_bootmem(base, size);
++	//free_bootmem(base, size);
+ }
+ 
+ void __init plat_mem_setup(void)
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0139-MIPS-ralink-add-spi-clock-definition-to-mt7620a.patch b/target/linux/ramips/patches-3.9/0139-MIPS-ralink-add-spi-clock-definition-to-mt7620a.patch
new file mode 100644
index 0000000000..c520b66e45
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0139-MIPS-ralink-add-spi-clock-definition-to-mt7620a.patch
@@ -0,0 +1,25 @@
+From 17d26ed75f0981cdc497f9062aec5f66d3c44d88 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 23 May 2013 18:46:25 +0200
+Subject: [PATCH 139/164] MIPS: ralink: add spi clock definition to mt7620a
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c |    1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 69729a5..08c96db6 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -183,6 +183,7 @@ void __init ralink_clk_init(void)
+ 	ralink_clk_add("cpu", cpu_rate);
+ 	ralink_clk_add("10000100.timer", 40000000);
+ 	ralink_clk_add("10000500.uart", 40000000);
++	ralink_clk_add("10000b00.spi", 40000000);
+ 	ralink_clk_add("10000c00.uartlite", 40000000);
+ }
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0140-MIPS-ralink-DTS-file-updates.patch b/target/linux/ramips/patches-3.9/0140-MIPS-ralink-DTS-file-updates.patch
new file mode 100644
index 0000000000..b85ff9cee6
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0140-MIPS-ralink-DTS-file-updates.patch
@@ -0,0 +1,1006 @@
+From cee339922876e924295c27e274923d1b381f5057 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 30 Apr 2013 17:27:46 +0200
+Subject: [PATCH 140/164] MIPS: ralink DTS file updates
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig                      |    8 +
+ arch/mips/ralink/dts/Makefile                 |    2 +
+ arch/mips/ralink/dts/mt7620a.dtsi             |  238 ++++++++++++++++++++++++-
+ arch/mips/ralink/dts/mt7620a_eval.dts         |  111 ++++++++++++
+ arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts |   99 ++++++++++
+ arch/mips/ralink/dts/rt2880.dtsi              |   17 ++
+ arch/mips/ralink/dts/rt2880_eval.dts          |    6 +
+ arch/mips/ralink/dts/rt3050.dtsi              |   31 +++-
+ arch/mips/ralink/dts/rt3052_eval.dts          |   19 +-
+ arch/mips/ralink/dts/rt5350.dtsi              |  227 +++++++++++++++++++++++
+ arch/mips/ralink/dts/rt5350_eval.dts          |   69 +++++++
+ 11 files changed, 824 insertions(+), 3 deletions(-)
+ create mode 100644 arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
+ create mode 100644 arch/mips/ralink/dts/rt5350.dtsi
+ create mode 100644 arch/mips/ralink/dts/rt5350_eval.dts
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 026e823..38540a4 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -42,6 +42,10 @@ choice
+ 		bool "RT305x eval kit"
+ 		depends on SOC_RT305X
+ 
++	config DTB_RT5350_EVAL
++		bool "RT5350 eval kit"
++		depends on SOC_RT305X
++
+ 	config DTB_RT3883_EVAL
+ 		bool "RT3883 eval kit"
+ 		depends on SOC_RT3883
+@@ -50,6 +54,10 @@ choice
+ 		bool "MT7620A eval kit"
+ 		depends on SOC_MT7620
+ 
++	config DTB_MT7620A_MT7610E_EVAL
++		bool "MT7620A + MT7610E eval kit"
++		depends on SOC_MT7620
++
+ endchoice
+ 
+ endif
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+index 18194fa..0bd12b5 100644
+--- a/arch/mips/ralink/dts/Makefile
++++ b/arch/mips/ralink/dts/Makefile
+@@ -1,4 +1,6 @@
+ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
+ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
++obj-$(CONFIG_DTB_RT5350_EVAL) := rt5350_eval.dtb.o
+ obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
+ obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
++obj-$(CONFIG_DTB_MT7620A_MT7610E_EVAL) := mt7620a_mt7610e_eval.dtb.o
+diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi
+index 08bf24f..104abfb 100644
+--- a/arch/mips/ralink/dts/mt7620a.dtsi
++++ b/arch/mips/ralink/dts/mt7620a.dtsi
+@@ -25,14 +25,36 @@
+ 		#size-cells = <1>;
+ 
+ 		sysc@0 {
+-			compatible = "ralink,mt7620a-sysc";
++			compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
+ 			reg = <0x0 0x100>;
+ 		};
+ 
++		timer@100 {
++			compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
++			reg = <0x100 0x20>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <1>;
++		};
++
++		watchdog@120 {
++			compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
++			reg = <0x120 0x10>;
++
++			resets = <&rstctrl 8>;
++			reset-names = "wdt";
++
++			interrupt-parent = <&intc>;
++			interrupts = <1>;
++		};
++
+ 		intc: intc@200 {
+ 			compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
+ 			reg = <0x200 0x100>;
+ 
++			resets = <&rstctrl 19>;
++			reset-names = "intc";
++
+ 			interrupt-controller;
+ 			#interrupt-cells = <1>;
+ 
+@@ -43,16 +65,230 @@
+ 		memc@300 {
+ 			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+ 			reg = <0x300 0x100>;
++
++			resets = <&rstctrl 20>;
++			reset-names = "mc";
++
++			interrupt-parent = <&intc>;
++			interrupts = <3>;
++		};
++
++		uart@500 {
++			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
++			reg = <0x500 0x100>;
++
++			resets = <&rstctrl 12>;
++			reset-names = "uart";
++
++			interrupt-parent = <&intc>;
++			interrupts = <5>;
++
++			reg-shift = <2>;
++
++			status = "disabled";
++		};
++
++		gpio0: gpio@600 {
++			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
++			reg = <0x600 0x34>;
++
++			resets = <&rstctrl 13>;
++			reset-names = "pio";
++
++			interrupt-parent = <&intc>;
++			interrupts = <6>;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			ralink,gpio-base = <0>;
++			ralink,num-gpios = <24>;
++			ralink,register-map = [ 00 04 08 0c
++						20 24 28 2c
++						30 34 ];
++
++			status = "disabled";
++		};
++
++		gpio1: gpio@638 {
++			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
++			reg = <0x638 0x24>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <6>;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			ralink,gpio-base = <24>;
++			ralink,num-gpios = <16>;
++			ralink,register-map = [ 00 04 08 0c
++						10 14 18 1c
++						20 24 ];
++
++			status = "disabled";
++		};
++
++		gpio2: gpio@660 {
++			compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
++			reg = <0x660 0x24>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <6>;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			ralink,gpio-base = <40>;
++			ralink,num-gpios = <32>;
++			ralink,register-map = [ 00 04 08 0c
++						10 14 18 1c
++						20 24 ];
++
++			status = "disabled";
++		};
++
++		i2c@900 {
++			compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
++			reg = <0x900 0x100>;
++
++			resets = <&rstctrl 16>;
++			reset-names = "i2c";
++
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "disabled";
++		};
++
++		spi@b00 {
++			compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
++			reg = <0xb00 0x100>;
++
++			resets = <&rstctrl 18>;
++			reset-names = "spi";
++
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			status = "disabled";
+ 		};
+ 
+ 		uartlite@c00 {
+ 			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ 			reg = <0xc00 0x100>;
+ 
++			resets = <&rstctrl 19>;
++			reset-names = "uartl";
++
+ 			interrupt-parent = <&intc>;
+ 			interrupts = <12>;
+ 
+ 			reg-shift = <2>;
+ 		};
++
++		systick@d00 {
++			compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
++			reg = <0xd00 0x10>;
++
++			resets = <&rstctrl 28>;
++			reset-names = "intc";
++
++			interrupt-parent = <&cpuintc>;
++			interrupts = <7>;
++		};
++
++		gdma@2800 {
++			compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
++			reg = <0x2800 0x800>;
++
++			resets = <&rstctrl 14>;
++			reset-names = "dma";
++
++			interrupt-parent = <&intc>;
++			interrupts = <7>;
++		};
++	};
++
++	rstctrl: rstctrl {
++		compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
++		#reset-cells = <1>;
++	};
++
++	ubsphy {
++		compatible = "ralink,mt7620a-usbphy";
++
++		resets = <&rstctrl 22 &rstctrl 25>;
++		reset-names = "host", "device";
++	};
++
++	ethernet@10100000 {
++		compatible = "ralink,mt7620a-eth";
++		reg = <0x10100000 10000>;
++
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		interrupt-parent = <&cpuintc>;
++		interrupts = <5>;
++
++		status = "disabled";
++	
++		mdio-bus {
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "disabled";
++		};
++	};
++
++	gsw@10110000 {
++		compatible = "ralink,mt7620a-gsw";
++		reg = <0x10110000 8000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <17>;
++
++		status = "disabled";
++	};
++
++	sdhci@10130000 {
++		compatible = "ralink,mt7620a-sdhci";
++		reg = <0x10130000 4000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <14>;
++
++		status = "disabled";
++	};
++
++	ehci@101c0000 {
++		compatible = "ralink,rt3xxx-ehci";
++		reg = <0x101c0000 0x1000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <18>;
++	};
++
++	ohci@101c1000 {
++		compatible = "ralink,rt3xxx-ohci";
++		reg = <0x101c1000 0x1000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <18>;
++	};
++
++	pcie@10140000 {
++		compatible = "ralink,mt7620a-pci";
++		reg = <0x10140000 0x100
++			0x10142000 0x100>;
++
++		resets = <&rstctrl 26>;
++		reset-names = "pcie0";
++
++		interrupt-parent = <&cpuintc>;
++		interrupts = <4>;
++
++		status = "disabled";
+ 	};
+ };
+diff --git a/arch/mips/ralink/dts/mt7620a_eval.dts b/arch/mips/ralink/dts/mt7620a_eval.dts
+index 35eb874..b56f449 100644
+--- a/arch/mips/ralink/dts/mt7620a_eval.dts
++++ b/arch/mips/ralink/dts/mt7620a_eval.dts
+@@ -13,4 +13,115 @@
+ 	chosen {
+ 		bootargs = "console=ttyS0,57600";
+ 	};
++
++	palmbus@10000000 {
++		sysc@0 {
++			ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
++			ralink,gpiomux = "i2c", "jtag";
++			ralink,uartmux = "gpio";
++			ralink,wdtmux = <1>;
++		};
++
++		gpio0: gpio@600 {
++			status = "okay";
++		};
++
++		spi@b00 {
++			status = "okay";
++		
++			m25p80@0 {
++				#address-cells = <1>;
++				#size-cells = <1>;
++				compatible = "en25q64";
++				reg = <0 0>;
++				linux,modalias = "m25p80", "en25q64";
++				spi-max-frequency = <10000000>;
++
++				partition@0 {
++					label = "u-boot";
++					reg = <0x0 0x30000>;
++					read-only;
++				};
++
++				partition@30000 {
++					label = "u-boot-env";
++					reg = <0x30000 0x10000>;
++					read-only;
++				};
++
++				factory: partition@40000 {
++					label = "factory";
++					reg = <0x40000 0x10000>;
++					read-only;
++				};
++
++				partition@50000 {
++					label = "firmware";
++					reg = <0x50000 0x7b0000>;
++				};
++			};
++		};
++	};
++
++	ethernet@10100000 {
++		status = "okay";
++		
++		port@4 {
++			compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
++			reg = <4>;
++			phy-mode = "rgmii";
++			phy-handle = <&phy4>;
++		};
++
++		port@5 {
++			compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
++			reg = <5>;
++			phy-mode = "rgmii";
++			phy-handle = <&phy5>;
++		};
++
++		mdio-bus {
++			status = "okay";
++
++			phy4: ethernet-phy@4 {
++				reg = <4>;
++				phy-mode = "rgmii";
++			};
++
++			phy5: ethernet-phy@5 {
++				reg = <5>;
++				phy-mode = "rgmii";
++			};
++		};
++	};
++
++	gsw@10110000 {
++		status = "okay";
++		ralink,port4 = "gmac";
++	};
++
++	sdhci@10130000 {
++		status = "okay";
++	};
++
++	pcie@10140000 {
++		status = "okay";
++	};
++
++	gpio-keys-polled {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		poll-interval = <20>;
++		s2 {
++			label = "S2";
++			gpios = <&gpio0 1 1>;
++			linux,code = <0x100>;
++		};
++		s3 {
++			label = "S3";
++			gpios = <&gpio0 2 1>;
++			linux,code = <0x101>;
++		};
++	};
+ };
+diff --git a/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts b/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
+new file mode 100644
+index 0000000..0d7755b
+--- /dev/null
++++ b/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
+@@ -0,0 +1,99 @@
++/dts-v1/;
++
++/include/ "mt7620a.dtsi"
++
++/ {
++	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
++	model = "Ralink MT7620A evaluation board";
++
++	memory@0 {
++		reg = <0x0 0x2000000>;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,57600";
++	};
++
++	palmbus@10000000 {
++		sysc@0 {
++			ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
++			ralink,gpiomux = "i2c", "jtag";
++			ralink,uartmux = "gpio";
++			ralink,wdtmux = <1>;
++		};
++
++		gpio0: gpio@600 {
++			status = "okay";
++		};
++
++		spi@b00 {
++			status = "okay";
++		
++			m25p80@0 {
++				#address-cells = <1>;
++				#size-cells = <1>;
++				compatible = "en25q64";
++				reg = <0 0>;
++				linux,modalias = "m25p80", "en25q64";
++				spi-max-frequency = <10000000>;
++
++				partition@0 {
++					label = "u-boot";
++					reg = <0x0 0x30000>;
++					read-only;
++				};
++
++				partition@30000 {
++					label = "u-boot-env";
++					reg = <0x30000 0x10000>;
++					read-only;
++				};
++
++				factory: partition@40000 {
++					label = "factory";
++					reg = <0x40000 0x10000>;
++					read-only;
++				};
++
++				partition@50000 {
++					label = "firmware";
++					reg = <0x50000 0x7b0000>;
++				};
++			};
++		};
++	};
++
++	ethernet@10100000 {
++		status = "okay";
++	};
++
++	gsw@10110000 {
++		status = "okay";
++		ralink,port4 = "ephy";
++	};
++
++	sdhci@10130000 {
++		status = "okay";
++	};
++
++	pcie@10140000 {
++		status = "okay";
++	};
++
++	gpio-keys-polled {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		poll-interval = <20>;
++		wps {
++			label = "wps";
++			gpios = <&gpio0 12 1>;
++			linux,code = <0x100>;
++		};
++		reset {
++			label = "reset";
++			gpios = <&gpio0 13 1>;
++			linux,code = <0x101>;
++		};
++	};
++};
+diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
+index 182afde..2a34b8d 100644
+--- a/arch/mips/ralink/dts/rt2880.dtsi
++++ b/arch/mips/ralink/dts/rt2880.dtsi
+@@ -55,4 +55,21 @@
+ 			reg-shift = <2>;
+ 		};
+ 	};
++
++	ethernet@400000 {
++		compatible = "ralink,rt2880-eth";
++		reg = <0x00400000 10000>;
++
++		interrupt-parent = <&cpuintc>;
++		interrupts = <5>;
++
++		status = "disabled";
++
++		mdio-bus {
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "disabled";
++		};
++	};
+ };
+diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
+index 322d700..58a1edf 100644
+--- a/arch/mips/ralink/dts/rt2880_eval.dts
++++ b/arch/mips/ralink/dts/rt2880_eval.dts
+@@ -43,4 +43,10 @@
+ 			reg = <0x50000 0x3b0000>;
+ 		};
+ 	};
++
++	ethernet@400000 {
++		status = "okay";
++
++		ralink,fixed-link = <1000 1 1 1>;
++	};
+ };
+diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
+index ef7da1e..b1ac940 100644
+--- a/arch/mips/ralink/dts/rt3050.dtsi
++++ b/arch/mips/ralink/dts/rt3050.dtsi
+@@ -1,7 +1,7 @@
+ / {
+ 	#address-cells = <1>;
+ 	#size-cells = <1>;
+-	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
++	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
+ 
+ 	cpus {
+ 		cpu@0 {
+@@ -45,6 +45,15 @@
+ 			reg = <0x300 0x100>;
+ 		};
+ 
++		i2c@900 {
++			compatible = "link,rt3052-i2c", "ralink,rt2880-i2c";
++			reg = <0x900 0x100>;
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "disabled";
++		};
++
+ 		uartlite@c00 {
+ 			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+ 			reg = <0xc00 0x100>;
+@@ -55,4 +64,24 @@
+ 			reg-shift = <2>;
+ 		};
+ 	};
++
++	ethernet@10100000 {
++		compatible = "ralink,rt3050-eth";
++		reg = <0x10100000 10000>;
++
++		interrupt-parent = <&cpuintc>;
++		interrupts = <5>;
++
++		status = "disabled";
++	};
++
++	esw@10110000 {
++		compatible = "ralink,rt3050-esw";
++		reg = <0x10110000 8000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <17>;
++
++		status = "disabled";
++	};
+ };
+diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
+index df17f5f..df02957 100644
+--- a/arch/mips/ralink/dts/rt3052_eval.dts
++++ b/arch/mips/ralink/dts/rt3052_eval.dts
+@@ -3,7 +3,7 @@
+ /include/ "rt3050.dtsi"
+ 
+ / {
+-	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
++	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc", "ralink,rt5350-soc";
+ 	model = "Ralink RT3052 evaluation board";
+ 
+ 	memory@0 {
+@@ -14,6 +14,14 @@
+ 		bootargs = "console=ttyS0,57600";
+ 	};
+ 
++	palmbus@10000000 {
++		sysc@0 {
++			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
++			ralink,uartmux = "gpio";
++			ralink,wdtmux = <1>;
++		};
++	};
++
+ 	cfi@1f000000 {
+ 		compatible = "cfi-flash";
+ 		reg = <0x1f000000 0x800000>;
+@@ -43,4 +51,13 @@
+ 			reg = <0x50000 0x7b0000>;
+ 		};
+ 	};
++
++	ethernet@10100000 {
++		status = "okay";
++	};
++
++	esw@10110000 {
++		status = "okay";
++		ralink,portmap = <0x2f>;
++	};
+ };
+diff --git a/arch/mips/ralink/dts/rt5350.dtsi b/arch/mips/ralink/dts/rt5350.dtsi
+new file mode 100644
+index 0000000..3d6b3bc
+--- /dev/null
++++ b/arch/mips/ralink/dts/rt5350.dtsi
+@@ -0,0 +1,227 @@
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	compatible = "ralink,rt5350-soc";
++
++	cpus {
++		cpu@0 {
++			compatible = "mips,mips24KEc";
++		};
++	};
++
++	cpuintc: cpuintc@0 {
++		#address-cells = <0>;
++		#interrupt-cells = <1>;
++		interrupt-controller;
++		compatible = "mti,cpu-interrupt-controller";
++	};
++
++	palmbus@10000000 {
++		compatible = "palmbus";
++		reg = <0x10000000 0x200000>;
++		ranges = <0x0 0x10000000 0x1FFFFF>;
++
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		sysc@0 {
++			compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
++			reg = <0x0 0x100>;
++		};
++
++		timer@100 {
++			compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
++			reg = <0x100 0x20>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <1>;
++		};
++
++		watchdog@120 {
++			compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
++			reg = <0x120 0x10>;
++
++			resets = <&rstctrl 8>;
++			reset-names = "wdt";
++
++			interrupt-parent = <&intc>;
++			interrupts = <1>;
++		};
++
++		intc: intc@200 {
++			compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
++			reg = <0x200 0x100>;
++
++			resets = <&rstctrl 19>;
++			reset-names = "intc";
++
++			interrupt-controller;
++			#interrupt-cells = <1>;
++
++			interrupt-parent = <&cpuintc>;
++			interrupts = <2>;
++		};
++
++		memc@300 {
++			compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
++			reg = <0x300 0x100>;
++
++			resets = <&rstctrl 20>;
++			reset-names = "mc";
++
++			interrupt-parent = <&intc>;
++			interrupts = <3>;
++		};
++
++		uart@500 {
++			compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
++			reg = <0x500 0x100>;
++
++			resets = <&rstctrl 12>;
++			reset-names = "uart";
++
++			interrupt-parent = <&intc>;
++			interrupts = <5>;
++
++			reg-shift = <2>;
++
++			status = "disabled";
++		};
++
++		gpio0: gpio@600 {
++			compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
++			reg = <0x600 0x34>;
++
++			resets = <&rstctrl 13>;
++			reset-names = "pio";
++
++			interrupt-parent = <&intc>;
++			interrupts = <6>;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			ralink,gpio-base = <0>;
++			ralink,num-gpios = <24>;
++			ralink,register-map = [ 00 04 08 0c
++						20 24 28 2c
++						30 34 ];
++
++			status = "disabled";
++		};
++
++		gpio1: gpio@638 {
++			compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
++			reg = <0x638 0x24>;
++
++			interrupt-parent = <&intc>;
++			interrupts = <6>;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			ralink,gpio-base = <24>;
++			ralink,num-gpios = <16>;
++			ralink,register-map = [ 00 04 08 0c
++						10 14 18 1c
++						20 24 ];
++
++			status = "disabled";
++		};
++
++		i2c@900 {
++			compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
++			reg = <0x900 0x100>;
++
++			resets = <&rstctrl 16>;
++			reset-names = "i2c";
++
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "disabled";
++		};
++
++		spi@b00 {
++			compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
++			reg = <0xb00 0x100>;
++
++			resets = <&rstctrl 18>;
++			reset-names = "spi";
++
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			status = "disabled";
++		};
++
++		uartlite@c00 {
++			compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
++			reg = <0xc00 0x100>;
++
++			resets = <&rstctrl 19>;
++			reset-names = "uartl";
++
++			interrupt-parent = <&intc>;
++			interrupts = <12>;
++
++			reg-shift = <2>;
++		};
++
++		systick@d00 {
++			compatible = "ralink,rt5350-systick", "ralink,cevt-systick";
++			reg = <0xd00 0x10>;
++
++			interrupt-parent = <&cpuintc>;
++			interrupts = <7>;
++		};
++	};
++
++	rstctrl: rstctrl {
++		compatible = "ralink,rt5350-reset", "ralink,rt2880-reset";
++		#reset-cells = <1>;
++	};
++
++	ubsphy {
++		compatible = "ralink,rt3xxx-usbphy";
++
++		resets = <&rstctrl 22 &rstctrl 25>;
++		reset-names = "host", "device";
++	};
++
++	ethernet@10100000 {
++		compatible = "ralink,rt5350-eth";
++		reg = <0x10100000 10000>;
++
++		interrupt-parent = <&cpuintc>;
++		interrupts = <5>;
++
++		status = "disabled";
++	};
++
++	esw@10110000 {
++		compatible = "ralink,rt3050-esw";
++		reg = <0x10110000 8000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <17>;
++
++		status = "disabled";
++	};
++
++	ehci@101c0000 {
++		compatible = "ralink,rt3xxx-ehci";
++		reg = <0x101c0000 0x1000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <18>;
++	};
++
++	ohci@101c1000 {
++		compatible = "ralink,rt3xxx-ohci";
++		reg = <0x101c1000 0x1000>;
++
++		interrupt-parent = <&intc>;
++		interrupts = <18>;
++	};
++};
+diff --git a/arch/mips/ralink/dts/rt5350_eval.dts b/arch/mips/ralink/dts/rt5350_eval.dts
+new file mode 100644
+index 0000000..ab92043
+--- /dev/null
++++ b/arch/mips/ralink/dts/rt5350_eval.dts
+@@ -0,0 +1,69 @@
++/dts-v1/;
++
++/include/ "rt5350.dtsi"
++
++/ {
++	compatible = "ralink,rt5350-eval-board", "ralink,rt5350-soc";
++	model = "Ralink RT5350 evaluation board";
++
++	chosen {
++		bootargs = "console=ttyS0,57600";
++	};
++
++	palmbus@10000000 {
++		sysc@0 {
++			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
++			ralink,uartmux = "gpio";
++			ralink,wdtmux = <1>;
++		};
++
++		gpio0: gpio@600 {
++			status = "okay";
++		};
++
++		spi@b00 {
++			status = "okay";
++		
++			m25p80@0 {
++				#address-cells = <1>;
++				#size-cells = <1>;
++				compatible = "en25q64";
++				reg = <0 0>;
++				linux,modalias = "m25p80", "mx25l3205d";
++				spi-max-frequency = <10000000>;
++
++				partition@0 {
++					label = "u-boot";
++					reg = <0x0 0x30000>;
++					read-only;
++				};
++
++				partition@30000 {
++					label = "u-boot-env";
++					reg = <0x30000 0x10000>;
++					read-only;
++				};
++
++				factory: partition@40000 {
++					label = "factory";
++					reg = <0x40000 0x10000>;
++					read-only;
++				};
++
++				partition@50000 {
++					label = "firmware";
++					reg = <0x50000 0x3b0000>;
++				};
++			};
++		};
++	};
++
++	ethernet@10100000 {
++		status = "okay";
++	};
++
++	esw@10110000 {
++		status = "okay";
++		ralink,portmap = <0x2f>;
++	};
++};
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0141-clocksource-make-clocksource_of_init-pass-a-device_n.patch b/target/linux/ramips/patches-3.9/0141-clocksource-make-clocksource_of_init-pass-a-device_n.patch
new file mode 100644
index 0000000000..6cfa91a049
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0141-clocksource-make-clocksource_of_init-pass-a-device_n.patch
@@ -0,0 +1,131 @@
+From ec2ed8cdbe8b3d24261f0d88eb039e9d71e5d588 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 23 May 2013 16:58:12 +0200
+Subject: [PATCH 141/164] clocksource: make clocksource_of_init() pass a
+ device_node pointer
+
+If we look at the clocksources that are OF enabled we will notice, that they
+all do a of_find_matching_node() when being called. This patch changes
+clocksource_of_init() to always pass the struct device_node pointer to the
+init function.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/clocksource/bcm2835_timer.c |   12 +-----------
+ drivers/clocksource/clksrc-of.c     |    4 ++--
+ drivers/clocksource/tegra20_timer.c |   14 +-------------
+ drivers/clocksource/vt8500_timer.c  |   14 +-------------
+ 4 files changed, 5 insertions(+), 39 deletions(-)
+
+diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
+index 50c68fe..766611d 100644
+--- a/drivers/clocksource/bcm2835_timer.c
++++ b/drivers/clocksource/bcm2835_timer.c
+@@ -95,23 +95,13 @@ static irqreturn_t bcm2835_time_interrupt(int irq, void *dev_id)
+ 	}
+ }
+ 
+-static struct of_device_id bcm2835_time_match[] __initconst = {
+-	{ .compatible = "brcm,bcm2835-system-timer" },
+-	{}
+-};
+-
+-static void __init bcm2835_timer_init(void)
++static void __init bcm2835_timer_init(struct device_node *node)
+ {
+-	struct device_node *node;
+ 	void __iomem *base;
+ 	u32 freq;
+ 	int irq;
+ 	struct bcm2835_timer *timer;
+ 
+-	node = of_find_matching_node(NULL, bcm2835_time_match);
+-	if (!node)
+-		panic("No bcm2835 timer node");
+-
+ 	base = of_iomap(node, 0);
+ 	if (!base)
+ 		panic("Can't remap registers");
+diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
+index bdabdaa..3ef11fb 100644
+--- a/drivers/clocksource/clksrc-of.c
++++ b/drivers/clocksource/clksrc-of.c
+@@ -26,10 +26,10 @@ void __init clocksource_of_init(void)
+ {
+ 	struct device_node *np;
+ 	const struct of_device_id *match;
+-	void (*init_func)(void);
++	void (*init_func)(struct device_node *);
+ 
+ 	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
+ 		init_func = match->data;
+-		init_func();
++		init_func(np);
+ 	}
+ }
+diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
+index 0bde03f..e698d8e 100644
+--- a/drivers/clocksource/tegra20_timer.c
++++ b/drivers/clocksource/tegra20_timer.c
+@@ -154,29 +154,17 @@ static struct irqaction tegra_timer_irq = {
+ 	.dev_id		= &tegra_clockevent,
+ };
+ 
+-static const struct of_device_id timer_match[] __initconst = {
+-	{ .compatible = "nvidia,tegra20-timer" },
+-	{}
+-};
+-
+ static const struct of_device_id rtc_match[] __initconst = {
+ 	{ .compatible = "nvidia,tegra20-rtc" },
+ 	{}
+ };
+ 
+-static void __init tegra20_init_timer(void)
++static void __init tegra20_init_timer(struct device_node *np)
+ {
+-	struct device_node *np;
+ 	struct clk *clk;
+ 	unsigned long rate;
+ 	int ret;
+ 
+-	np = of_find_matching_node(NULL, timer_match);
+-	if (!np) {
+-		pr_err("Failed to find timer DT node\n");
+-		BUG();
+-	}
+-
+ 	timer_reg_base = of_iomap(np, 0);
+ 	if (!timer_reg_base) {
+ 		pr_err("Can't map timer registers\n");
+diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
+index 8efc86b..2422552 100644
+--- a/drivers/clocksource/vt8500_timer.c
++++ b/drivers/clocksource/vt8500_timer.c
+@@ -129,22 +129,10 @@ static struct irqaction irq = {
+ 	.dev_id  = &clockevent,
+ };
+ 
+-static struct of_device_id vt8500_timer_ids[] = {
+-	{ .compatible = "via,vt8500-timer" },
+-	{ }
+-};
+-
+-static void __init vt8500_timer_init(void)
++static void __init vt8500_timer_init(struct device_node *np)
+ {
+-	struct device_node *np;
+ 	int timer_irq;
+ 
+-	np = of_find_matching_node(NULL, vt8500_timer_ids);
+-	if (!np) {
+-		pr_err("%s: Timer description missing from Device Tree\n",
+-								__func__);
+-		return;
+-	}
+ 	regbase = of_iomap(np, 0);
+ 	if (!regbase) {
+ 		pr_err("%s: Missing iobase description in Device Tree\n",
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0142-clocksource-MIPS-ralink-add-support-for-systick-time.patch b/target/linux/ramips/patches-3.9/0142-clocksource-MIPS-ralink-add-support-for-systick-time.patch
new file mode 100644
index 0000000000..a17c160355
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0142-clocksource-MIPS-ralink-add-support-for-systick-time.patch
@@ -0,0 +1,259 @@
+From bc350a91da176ae8573c0755c66f5ee1911495bc Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 30 Apr 2013 12:35:50 +0200
+Subject: [PATCH 142/164] clocksource: MIPS: ralink: add support for systick
+ timer found on newer ralink SoC
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig          |    2 +
+ arch/mips/ralink/clk.c            |    1 +
+ drivers/clocksource/Kconfig       |    6 ++
+ drivers/clocksource/Makefile      |    1 +
+ drivers/clocksource/cevt-rt3352.c |  162 +++++++++++++++++++++++++++++++++++++
+ include/linux/clocksource.h       |    1 +
+ 6 files changed, 173 insertions(+)
+ create mode 100644 drivers/clocksource/cevt-rt3352.c
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 38540a4..3fe032c 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -14,6 +14,7 @@ choice
+ 		select USB_ARCH_HAS_HCD
+ 		select USB_ARCH_HAS_OHCI
+ 		select USB_ARCH_HAS_EHCI
++		select CLKEVT_RT3352
+ 
+ 	config SOC_RT3883
+ 		bool "RT3883"
+@@ -22,6 +23,7 @@ choice
+ 
+ 	config SOC_MT7620
+ 		bool "MT7620"
++		select CLKEVT_RT3352
+ 
+ endchoice
+ 
+diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
+index 8dfa22f..bba0cdf 100644
+--- a/arch/mips/ralink/clk.c
++++ b/arch/mips/ralink/clk.c
+@@ -69,4 +69,5 @@ void __init plat_time_init(void)
+ 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
+ 	mips_hpt_frequency = clk_get_rate(clk) / 2;
+ 	clk_put(clk);
++	clocksource_of_init();
+ }
+diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
+index e507ab7..1216c16 100644
+--- a/drivers/clocksource/Kconfig
++++ b/drivers/clocksource/Kconfig
+@@ -7,6 +7,12 @@ config CLKSRC_I8253
+ config CLKEVT_I8253
+ 	bool
+ 
++config CLKEVT_RT3352
++	bool
++	depends on MIPS && RALINK
++	select CLKSRC_OF
++	select CLKSRC_MMIO
++
+ config I8253_LOCK
+ 	bool
+ 
+diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
+index 4d8283a..db47a4e 100644
+--- a/drivers/clocksource/Makefile
++++ b/drivers/clocksource/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_SH_TIMER_TMU)	+= sh_tmu.o
+ obj-$(CONFIG_EM_TIMER_STI)	+= em_sti.o
+ obj-$(CONFIG_CLKBLD_I8253)	+= i8253.o
+ obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
++obj-$(CONFIG_CLKEVT_RT3352)	+= cevt-rt3352.o
+ obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
+ obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
+ obj-$(CONFIG_CLKSRC_NOMADIK_MTU)	+= nomadik-mtu.o
+diff --git a/drivers/clocksource/cevt-rt3352.c b/drivers/clocksource/cevt-rt3352.c
+new file mode 100644
+index 0000000..bd50edd
+--- /dev/null
++++ b/drivers/clocksource/cevt-rt3352.c
+@@ -0,0 +1,162 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2013 by John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/clockchips.h>
++#include <linux/clocksource.h>
++#include <linux/interrupt.h>
++#include <linux/reset.h>
++#include <linux/init.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_address.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++#include <asm/time.h>
++
++#define SYSTICK_FREQ	(50 * 1000)
++
++#define SYSTICK_CONFIG	0x00
++#define SYSTICK_COMPARE	0x04
++#define SYSTICK_COUNT	0x08
++
++/* route systick irq to mips irq 7 instead of the r4k-timer */
++#define CFG_EXT_STK_EN	0x2
++/* enable the counter */
++#define CFG_CNT_EN	0x1
++
++struct systick_device {
++	void __iomem *membase;
++	struct clock_event_device dev;
++	int irq_requested;
++	int freq_scale;
++};
++
++static void systick_set_clock_mode(enum clock_event_mode mode,
++				struct clock_event_device *evt);
++
++static int systick_next_event(unsigned long delta,
++				struct clock_event_device *evt)
++{
++	struct systick_device *sdev = container_of(evt, struct systick_device, dev);
++	u32 count;
++
++	count = ioread32(sdev->membase + SYSTICK_COUNT);
++	count = (count + delta) % SYSTICK_FREQ;
++	iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
++
++	return 0;
++}
++
++static void systick_event_handler(struct clock_event_device *dev)
++{
++	/* noting to do here */
++}
++
++static irqreturn_t systick_interrupt(int irq, void *dev_id)
++{
++	struct clock_event_device *dev = (struct clock_event_device *) dev_id;
++
++	dev->event_handler(dev);
++
++	return IRQ_HANDLED;
++}
++
++static struct systick_device systick = {
++	.dev = {
++		/* cevt-r4k uses 300, make sure systick gets used if available */
++		.rating		= 310,
++		.features	= CLOCK_EVT_FEAT_ONESHOT,
++		.set_next_event	= systick_next_event,
++		.set_mode	= systick_set_clock_mode,
++		.event_handler	= systick_event_handler,
++	},
++};
++
++static struct irqaction systick_irqaction = {
++	.handler = systick_interrupt,
++	.flags = IRQF_PERCPU | IRQF_TIMER,
++	.dev_id = &systick.dev,
++};
++
++/* ugly hack */
++#ifdef CONFIG_SOC_MT7620
++
++#define CLK_LUT_CFG	0x40
++#define SLEEP_EN	BIT(31)
++
++static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
++{
++	if (sdev->freq_scale == status)
++		return;
++
++	sdev->freq_scale = status;
++
++	pr_info("%s: %s autosleep mode\n", systick.dev.name, (status) ? ("enable") : ("disable"));
++	if (status)
++		rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
++	else
++		rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
++}
++#else
++static inline void mt7620_freq_scaling(struct systick_device *sdev, int status) {}
++#endif
++
++static void systick_set_clock_mode(enum clock_event_mode mode,
++				struct clock_event_device *evt)
++{
++	struct systick_device *sdev = container_of(evt, struct systick_device, dev);
++
++	switch (mode) {
++	case CLOCK_EVT_MODE_ONESHOT:
++		if (!sdev->irq_requested)
++			setup_irq(systick.dev.irq, &systick_irqaction);
++		mt7620_freq_scaling(sdev, 1);
++		sdev->irq_requested = 1;
++		iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
++		break;
++
++	case CLOCK_EVT_MODE_SHUTDOWN:
++		if (sdev->irq_requested)
++			free_irq(systick.dev.irq, &systick_irqaction);
++		mt7620_freq_scaling(sdev, 0);
++		sdev->irq_requested = 0;
++		iowrite32(0, systick.membase + SYSTICK_CONFIG);
++		break;
++
++	default:
++		pr_err("%s: Unhandeled mips clock_mode\n", systick.dev.name);
++		break;
++	}
++}
++
++static void __init ralink_systick_init(struct device_node *np)
++{
++	systick.membase = of_iomap(np, 0);
++	if (!systick.membase) {
++		pr_err("%s: of_iomap failed", np->name);
++		return;
++	}
++
++	clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
++			SYSTICK_FREQ, 301, 16, clocksource_mmio_readl_up);
++
++	systick_irqaction.name = np->name;
++	systick.dev.name = np->name;
++	clockevent_set_clock(&systick.dev, SYSTICK_FREQ);
++	systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
++	systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
++	systick.dev.irq = irq_of_parse_and_map(np, 0);
++	if (!systick.dev.irq)
++		panic("%s: request_irq failed", np->name);
++
++	clockevents_register_device(&systick.dev);
++
++	pr_info("%s: runing - mult: %d, shift: %d\n", np->name, systick.dev.mult, systick.dev.shift);
++}
++
++CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);
+diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
+index 27cfda4..08ed5e1 100644
+--- a/include/linux/clocksource.h
++++ b/include/linux/clocksource.h
+@@ -340,6 +340,7 @@ extern void clocksource_of_init(void);
+ 		__used __section(__clksrc_of_table)			\
+ 		 = { .compatible = compat, .data = fn };
+ #else
++static inline void clocksource_of_init(void) {}
+ #define CLOCKSOURCE_OF_DECLARE(name, compat, fn)
+ #endif
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0143-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch b/target/linux/ramips/patches-3.9/0143-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch
new file mode 100644
index 0000000000..a6c36f09ea
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0143-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch
@@ -0,0 +1,425 @@
+From 82a24aa01752a87c571e47323f0e141c818e531b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 22 Jan 2013 18:24:34 +0100
+Subject: [PATCH 143/164] GPIO: MIPS: ralink: adds ralink gpio support
+
+Add gpio driver for Ralink SoC. This driver makes the gpio core on
+RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/Kconfig                        |    1 +
+ arch/mips/include/asm/mach-ralink/gpio.h |   24 +++
+ drivers/gpio/Kconfig                     |    6 +
+ drivers/gpio/Makefile                    |    1 +
+ drivers/gpio/gpio-ralink.c               |  326 ++++++++++++++++++++++++++++++
+ 5 files changed, 358 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
+ create mode 100644 drivers/gpio/gpio-ralink.c
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index e4da4f8..b237c50 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -443,6 +443,7 @@ config RALINK
+ 	select SYS_HAS_EARLY_PRINTK
+ 	select HAVE_MACH_CLKDEV
+ 	select CLKDEV_LOOKUP
++	select ARCH_REQUIRE_GPIOLIB
+ 
+ config SGI_IP22
+ 	bool "SGI IP22 (Indy/Indigo2)"
+diff --git a/arch/mips/include/asm/mach-ralink/gpio.h b/arch/mips/include/asm/mach-ralink/gpio.h
+new file mode 100644
+index 0000000..f68ee16
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/gpio.h
+@@ -0,0 +1,24 @@
++/*
++ *  Ralink SoC GPIO API support
++ *
++ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MACH_RALINK_GPIO_H
++#define __ASM_MACH_RALINK_GPIO_H
++
++#define ARCH_NR_GPIOS	128
++#include <asm-generic/gpio.h>
++
++#define gpio_get_value	__gpio_get_value
++#define gpio_set_value	__gpio_set_value
++#define gpio_cansleep	__gpio_cansleep
++#define gpio_to_irq	__gpio_to_irq
++
++#endif /* __ASM_MACH_RALINK_GPIO_H */
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index 93aaadf..29add97 100644
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -204,6 +204,12 @@ config GPIO_PXA
+ 	help
+ 	  Say yes here to support the PXA GPIO device
+ 
++config GPIO_RALINK
++	bool "Ralink GPIO Support"
++	depends on RALINK
++	help
++	  Say yes here to support the Ralink SoC GPIO device
++
+ config GPIO_SPEAR_SPICS
+ 	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+ 	depends on PLAT_SPEAR
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index 22e07bc..f7b6603 100644
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -55,6 +55,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
+ obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
+ obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
+ obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
++obj-$(CONFIG_GPIO_RALINK)	+= gpio-ralink.o
+ obj-$(CONFIG_GPIO_RC5T583)	+= gpio-rc5t583.o
+ obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
+ obj-$(CONFIG_PLAT_SAMSUNG)	+= gpio-samsung.o
+diff --git a/drivers/gpio/gpio-ralink.c b/drivers/gpio/gpio-ralink.c
+new file mode 100644
+index 0000000..12984f1
+--- /dev/null
++++ b/drivers/gpio/gpio-ralink.c
+@@ -0,0 +1,326 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/spinlock.h>
++#include <linux/platform_device.h>
++#include <linux/of_irq.h>
++#include <linux/irqdomain.h>
++#include <linux/interrupt.h>
++
++enum ralink_gpio_reg {
++	GPIO_REG_INT = 0,
++	GPIO_REG_EDGE,
++	GPIO_REG_RENA,
++	GPIO_REG_FENA,
++	GPIO_REG_DATA,
++	GPIO_REG_DIR,
++	GPIO_REG_POL,
++	GPIO_REG_SET,
++	GPIO_REG_RESET,
++	GPIO_REG_TOGGLE,
++	GPIO_REG_MAX
++};
++
++struct ralink_gpio_chip {
++	struct gpio_chip chip;
++	u8 regs[GPIO_REG_MAX];
++
++	spinlock_t lock;
++	void __iomem *membase;
++	struct irq_domain *domain;
++	int irq;
++
++	u32 rising;
++	u32 falling;
++};
++
++#define MAP_MAX	4
++static struct irq_domain *irq_map[MAP_MAX];
++static int irq_map_count;
++static atomic_t irq_refcount = ATOMIC_INIT(0);
++
++static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
++{
++	struct ralink_gpio_chip *rg;
++
++	rg = container_of(chip, struct ralink_gpio_chip, chip);
++
++	return rg;
++}
++
++static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
++{
++	iowrite32(val, rg->membase + rg->regs[reg]);
++}
++
++static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
++{
++	return ioread32(rg->membase + rg->regs[reg]);
++}
++
++static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++	rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
++}
++
++static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++	return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
++}
++
++static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++	unsigned long flags;
++	u32 t;
++
++	spin_lock_irqsave(&rg->lock, flags);
++	t = rt_gpio_r32(rg, GPIO_REG_DIR);
++	t &= ~BIT(offset);
++	rt_gpio_w32(rg, GPIO_REG_DIR, t);
++	spin_unlock_irqrestore(&rg->lock, flags);
++
++	return 0;
++}
++
++static int ralink_gpio_direction_output(struct gpio_chip *chip,
++					unsigned offset, int value)
++{
++	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++	unsigned long flags;
++	u32 t;
++
++	spin_lock_irqsave(&rg->lock, flags);
++	ralink_gpio_set(chip, offset, value);
++	t = rt_gpio_r32(rg, GPIO_REG_DIR);
++	t |= BIT(offset);
++	rt_gpio_w32(rg, GPIO_REG_DIR, t);
++	spin_unlock_irqrestore(&rg->lock, flags);
++
++	return 0;
++}
++
++static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
++{
++	struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++	if (rg->irq < 1)
++		return -1;
++
++	ralink_gpio_direction_input(chip, pin);
++
++	return irq_create_mapping(rg->domain, pin);
++}
++
++static void ralink_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++	int i;
++
++	for (i = 0; i < irq_map_count; i++) {
++		struct irq_domain *domain = irq_map[i];
++		struct ralink_gpio_chip *rg = (struct ralink_gpio_chip *) domain->host_data;
++		unsigned long pending = rt_gpio_r32(rg, GPIO_REG_INT);
++		int bit;
++
++		for_each_set_bit(bit, &pending, rg->chip.ngpio) {
++			u32 map = irq_find_mapping(domain, bit);
++			generic_handle_irq(map);
++			rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
++		}
++	}
++}
++
++static void ralink_gpio_irq_unmask(struct irq_data *d)
++{
++	struct ralink_gpio_chip *rg = (struct ralink_gpio_chip *) d->domain->host_data;
++	u32 val = rt_gpio_r32(rg, GPIO_REG_RENA);
++	unsigned long flags;
++
++	spin_lock_irqsave(&rg->lock, flags);
++	rt_gpio_w32(rg, GPIO_REG_RENA, val | (BIT(d->hwirq) & rg->rising));
++	rt_gpio_w32(rg, GPIO_REG_FENA, val | (BIT(d->hwirq) & rg->falling));
++	spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static void ralink_gpio_irq_mask(struct irq_data *d)
++{
++	struct ralink_gpio_chip *rg = (struct ralink_gpio_chip *) d->domain->host_data;
++	u32 val = rt_gpio_r32(rg, GPIO_REG_RENA);
++	unsigned long flags;
++
++	spin_lock_irqsave(&rg->lock, flags);
++	rt_gpio_w32(rg, GPIO_REG_FENA, val & ~BIT(d->hwirq));
++	rt_gpio_w32(rg, GPIO_REG_RENA, val & ~BIT(d->hwirq));
++	spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
++{
++	struct ralink_gpio_chip *rg = (struct ralink_gpio_chip *) d->domain->host_data;
++	u32 mask = BIT(d->hwirq);
++
++	if (type == IRQ_TYPE_PROBE) {
++		if ((rg->rising | rg->falling) & mask)
++			return 0;
++
++		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_RISING;
++	}
++
++	if (type & IRQ_TYPE_EDGE_RISING)
++		rg->rising |= mask;
++	else
++		rg->rising &= mask;
++
++	if (type & IRQ_TYPE_EDGE_RISING)
++		rg->falling |= mask;
++	else
++		rg->falling &= mask;
++
++	return 0;
++}
++
++static struct irq_chip ralink_gpio_irq_chip = {
++	.name		= "GPIO",
++	.irq_unmask	= ralink_gpio_irq_unmask,
++	.irq_mask	= ralink_gpio_irq_mask,
++	.irq_mask_ack	= ralink_gpio_irq_mask,
++	.irq_set_type	= ralink_gpio_irq_type,
++};
++
++static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
++{
++	irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
++	irq_set_handler_data(irq, d);
++
++	return 0;
++}
++
++static const struct irq_domain_ops irq_domain_ops = {
++	.xlate = irq_domain_xlate_onecell,
++	.map = gpio_map,
++};
++
++static void ralink_gpio_irq_init(struct device_node *np, struct ralink_gpio_chip *rg)
++{
++	if (irq_map_count >= MAP_MAX)
++		return;
++
++	rg->irq = irq_of_parse_and_map(np, 0);
++	if (!rg->irq)
++		return;
++
++	rg->domain = irq_domain_add_linear(np, rg->chip.ngpio, &irq_domain_ops, rg);
++	if (!rg->domain) {
++		dev_err(rg->chip.dev, "irq_domain_add_linear failed\n");
++		return;
++	}
++
++	irq_map[irq_map_count++] = rg->domain;
++
++	rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
++	rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
++
++	if (!atomic_read(&irq_refcount))
++		irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
++	atomic_inc(&irq_refcount);
++
++	dev_info(rg->chip.dev, "registering %d irq handlers\n", rg->chip.ngpio);
++}
++
++static int ralink_gpio_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	struct ralink_gpio_chip *rg;
++	const __be32 *ngpio, *gpiobase;
++
++	if (!res) {
++		dev_err(&pdev->dev, "failed to find resource\n");
++		return -ENOMEM;
++	}
++
++	rg = devm_kzalloc(&pdev->dev,
++			sizeof(struct ralink_gpio_chip), GFP_KERNEL);
++	if (!rg)
++		return -ENOMEM;
++
++	rg->membase = devm_request_and_ioremap(&pdev->dev, res);
++	if (!rg->membase) {
++		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
++		return -ENOMEM;
++	}
++
++	if (of_property_read_u8_array(np, "ralink,register-map",
++			rg->regs, GPIO_REG_MAX)) {
++		dev_err(&pdev->dev, "failed to read register definition\n");
++		return -EINVAL;
++	}
++
++	ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++	if (!ngpio) {
++		dev_err(&pdev->dev, "failed to read number of pins\n");
++		return -EINVAL;
++	}
++
++	gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
++	if (gpiobase)
++		rg->chip.base = be32_to_cpu(*gpiobase);
++	else
++		rg->chip.base = -1;
++
++	spin_lock_init(&rg->lock);
++
++	rg->chip.dev = &pdev->dev;
++	rg->chip.label = dev_name(&pdev->dev);
++	rg->chip.of_node = np;
++	rg->chip.ngpio = be32_to_cpu(*ngpio);
++	rg->chip.direction_input = ralink_gpio_direction_input;
++	rg->chip.direction_output = ralink_gpio_direction_output;
++	rg->chip.get = ralink_gpio_get;
++	rg->chip.set = ralink_gpio_set;
++	rg->chip.to_irq = ralink_gpio_to_irq;
++
++	/* set polarity to low for all lines */
++	rt_gpio_w32(rg, GPIO_REG_POL, 0);
++
++	dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
++
++	ralink_gpio_irq_init(np, rg);
++
++	return gpiochip_add(&rg->chip);
++}
++
++static const struct of_device_id ralink_gpio_match[] = {
++	{ .compatible = "ralink,rt2880-gpio" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ralink_gpio_match);
++
++static struct platform_driver ralink_gpio_driver = {
++	.probe = ralink_gpio_probe,
++	.driver = {
++		.name = "rt2880_gpio",
++		.owner = THIS_MODULE,
++		.of_match_table = ralink_gpio_match,
++	},
++};
++
++static int __init ralink_gpio_init(void)
++{
++	return platform_driver_register(&ralink_gpio_driver);
++}
++
++subsys_initcall(ralink_gpio_init);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0144-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-3.9/0144-SPI-ralink-add-Ralink-SoC-spi-driver.patch
new file mode 100644
index 0000000000..07a49c9f6e
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0144-SPI-ralink-add-Ralink-SoC-spi-driver.patch
@@ -0,0 +1,528 @@
+From 14620ea8ee17ba9642fbe42d73ff8ebfb42d6cf7 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Apr 2013 23:16:18 +0200
+Subject: [PATCH 144/164] SPI: ralink: add Ralink SoC spi driver
+
+Add the driver needed to make SPI work on Ralink SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/Kconfig      |    6 +
+ drivers/spi/Makefile     |    1 +
+ drivers/spi/spi-ralink.c |  475 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 482 insertions(+)
+ create mode 100644 drivers/spi/spi-ralink.c
+
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 2be0de9..a7de751 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -327,6 +327,12 @@ config SPI_RSPI
+ 	help
+ 	  SPI driver for Renesas RSPI blocks.
+ 
++config SPI_RALINK
++	tristate "Ralink RT288x/RT305x/RT3662 SPI Controller"
++	depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620)
++	help
++	  This selects a driver for the Ralink RT288x/RT305x SPI Controller.
++
+ config SPI_S3C24XX
+ 	tristate "Samsung S3C24XX series SPI"
+ 	depends on ARCH_S3C24XX
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index e53c309..a4b3c5b 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -53,6 +53,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA)	+= spi-pxa2xx-dma.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
+ obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
++obj-$(CONFIG_SPI_RALINK)		+= spi-ralink.o
+ obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y			:= spi-s3c24xx.o
+ spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
+diff --git a/drivers/spi/spi-ralink.c b/drivers/spi/spi-ralink.c
+new file mode 100644
+index 0000000..b07cbaa
+--- /dev/null
++++ b/drivers/spi/spi-ralink.c
+@@ -0,0 +1,475 @@
++/*
++ * spi-ralink.c -- Ralink RT288x/RT305x SPI controller driver
++ *
++ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Some parts are based on spi-orion.c:
++ *   Author: Shadi Ammouri <shadi@marvell.com>
++ *   Copyright (C) 2007-2008 Marvell Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/reset.h>
++#include <linux/spi/spi.h>
++#include <linux/platform_device.h>
++
++#define DRIVER_NAME			"spi-ralink"
++#define RALINK_NUM_CHIPSELECTS		1 /* only one slave is supported*/
++#define RALINK_SPI_WAIT_RDY_MAX_LOOP	2000 /* in usec */
++
++#define RAMIPS_SPI_STAT			0x00
++#define RAMIPS_SPI_CFG			0x10
++#define RAMIPS_SPI_CTL			0x14
++#define RAMIPS_SPI_DATA			0x20
++
++/* SPISTAT register bit field */
++#define SPISTAT_BUSY			BIT(0)
++
++/* SPICFG register bit field */
++#define SPICFG_LSBFIRST			0
++#define SPICFG_MSBFIRST			BIT(8)
++#define SPICFG_SPICLKPOL		BIT(6)
++#define SPICFG_RXCLKEDGE_FALLING	BIT(5)
++#define SPICFG_TXCLKEDGE_FALLING	BIT(4)
++#define SPICFG_SPICLK_PRESCALE_MASK	0x7
++#define SPICFG_SPICLK_DIV2		0
++#define SPICFG_SPICLK_DIV4		1
++#define SPICFG_SPICLK_DIV8		2
++#define SPICFG_SPICLK_DIV16		3
++#define SPICFG_SPICLK_DIV32		4
++#define SPICFG_SPICLK_DIV64		5
++#define SPICFG_SPICLK_DIV128		6
++#define SPICFG_SPICLK_DISABLE		7
++
++/* SPICTL register bit field */
++#define SPICTL_HIZSDO			BIT(3)
++#define SPICTL_STARTWR			BIT(2)
++#define SPICTL_STARTRD			BIT(1)
++#define SPICTL_SPIENA			BIT(0)
++
++#ifdef DEBUG
++#define spi_debug(args...) printk(args)
++#else
++#define spi_debug(args...)
++#endif
++
++struct ralink_spi {
++	struct spi_master	*master;
++	void __iomem		*base;
++	unsigned int		sys_freq;
++	unsigned int		speed;
++	struct clk		*clk;
++};
++
++static inline struct ralink_spi *spidev_to_ralink_spi(struct spi_device *spi)
++{
++	return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 ralink_spi_read(struct ralink_spi *rs, u32 reg)
++{
++	return ioread32(rs->base + reg);
++}
++
++static inline void ralink_spi_write(struct ralink_spi *rs, u32 reg, u32 val)
++{
++	iowrite32(val, rs->base + reg);
++}
++
++static inline void ralink_spi_setbits(struct ralink_spi *rs, u32 reg, u32 mask)
++{
++	void __iomem *addr = rs->base + reg;
++	u32 val;
++
++	val = ioread32(addr);
++	val |= mask;
++	iowrite32(val, addr);
++}
++
++static inline void ralink_spi_clrbits(struct ralink_spi *rs, u32 reg, u32 mask)
++{
++	void __iomem *addr = rs->base + reg;
++	u32 val;
++
++	val = ioread32(addr);
++	val &= ~mask;
++	iowrite32(val, addr);
++}
++
++static int ralink_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
++{
++	struct ralink_spi *rs = spidev_to_ralink_spi(spi);
++	u32 rate;
++	u32 prescale;
++	u32 reg;
++
++	spi_debug("%s: speed:%u\n", __func__, speed);
++
++	/*
++	 * the supported rates are: 2, 4, 8, ... 128
++	 * round up as we look for equal or less speed
++	 */
++	rate = DIV_ROUND_UP(rs->sys_freq, speed);
++	spi_debug("%s: rate-1:%u\n", __func__, rate);
++	rate = roundup_pow_of_two(rate);
++	spi_debug("%s: rate-2:%u\n", __func__, rate);
++
++	/* check if requested speed is too small */
++	if (rate > 128)
++		return -EINVAL;
++
++	if (rate < 2)
++		rate = 2;
++
++	/* Convert the rate to SPI clock divisor value.	*/
++	prescale = ilog2(rate/2);
++	spi_debug("%s: prescale:%u\n", __func__, prescale);
++
++	reg = ralink_spi_read(rs, RAMIPS_SPI_CFG);
++	reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
++	ralink_spi_write(rs, RAMIPS_SPI_CFG, reg);
++	rs->speed = speed;
++	return 0;
++}
++
++/*
++ * called only when no transfer is active on the bus
++ */
++static int
++ralink_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
++{
++	struct ralink_spi *rs = spidev_to_ralink_spi(spi);
++	unsigned int speed = spi->max_speed_hz;
++	int rc;
++	unsigned int bits_per_word = 8;
++
++	if ((t != NULL) && t->speed_hz)
++		speed = t->speed_hz;
++
++	if ((t != NULL) && t->bits_per_word)
++		bits_per_word = t->bits_per_word;
++
++	if (rs->speed != speed) {
++		spi_debug("%s: speed_hz:%u\n", __func__, speed);
++		rc = ralink_spi_baudrate_set(spi, speed);
++		if (rc)
++			return rc;
++	}
++
++	if (bits_per_word != 8) {
++		spi_debug("%s: bad bits_per_word: %u\n", __func__,
++			  bits_per_word);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static void ralink_spi_set_cs(struct ralink_spi *rs, int enable)
++{
++	if (enable)
++		ralink_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++	else
++		ralink_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++}
++
++static inline int ralink_spi_wait_till_ready(struct ralink_spi *rs)
++{
++	int i;
++
++	for (i = 0; i < RALINK_SPI_WAIT_RDY_MAX_LOOP; i++) {
++		u32 status;
++
++		status = ralink_spi_read(rs, RAMIPS_SPI_STAT);
++		if ((status & SPISTAT_BUSY) == 0)
++			return 0;
++
++		udelay(1);
++	}
++
++	return -ETIMEDOUT;
++}
++
++static unsigned int
++ralink_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
++{
++	struct ralink_spi *rs = spidev_to_ralink_spi(spi);
++	unsigned count = 0;
++	u8 *rx = xfer->rx_buf;
++	const u8 *tx = xfer->tx_buf;
++	int err;
++
++	spi_debug("%s(%d): %s %s\n", __func__, xfer->len,
++		  (tx != NULL) ? "tx" : "  ",
++		  (rx != NULL) ? "rx" : "  ");
++
++	if (tx) {
++		for (count = 0; count < xfer->len; count++) {
++			ralink_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
++			ralink_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
++			err = ralink_spi_wait_till_ready(rs);
++			if (err) {
++				dev_err(&spi->dev, "TX failed, err=%d\n", err);
++				goto out;
++			}
++		}
++	}
++
++	if (rx) {
++		for (count = 0; count < xfer->len; count++) {
++			ralink_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
++			err = ralink_spi_wait_till_ready(rs);
++			if (err) {
++				dev_err(&spi->dev, "RX failed, err=%d\n", err);
++				goto out;
++			}
++			rx[count] = (u8) ralink_spi_read(rs, RAMIPS_SPI_DATA);
++		}
++	}
++
++out:
++	return count;
++}
++
++static int ralink_spi_transfer_one_message(struct spi_master *master,
++					   struct spi_message *m)
++{
++	struct ralink_spi *rs = spi_master_get_devdata(master);
++	struct spi_device *spi = m->spi;
++	struct spi_transfer *t = NULL;
++	int par_override = 0;
++	int status = 0;
++	int cs_active = 0;
++
++	/* Load defaults */
++	status = ralink_spi_setup_transfer(spi, NULL);
++	if (status < 0)
++		goto msg_done;
++
++	list_for_each_entry(t, &m->transfers, transfer_list) {
++		unsigned int bits_per_word = spi->bits_per_word;
++
++		if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
++			dev_err(&spi->dev,
++				"message rejected: invalid transfer data buffers\n");
++			status = -EIO;
++			goto msg_done;
++		}
++
++		if (t->bits_per_word)
++			bits_per_word = t->bits_per_word;
++
++		if (bits_per_word != 8) {
++			dev_err(&spi->dev,
++				"message rejected: invalid transfer bits_per_word (%d bits)\n",
++				bits_per_word);
++			status = -EIO;
++			goto msg_done;
++		}
++
++		if (t->speed_hz && t->speed_hz < (rs->sys_freq / 128)) {
++			dev_err(&spi->dev,
++				"message rejected: device min speed (%d Hz) exceeds required transfer speed (%d Hz)\n",
++				(rs->sys_freq / 128), t->speed_hz);
++			status = -EIO;
++			goto msg_done;
++		}
++
++		if (par_override || t->speed_hz || t->bits_per_word) {
++			par_override = 1;
++			status = ralink_spi_setup_transfer(spi, t);
++			if (status < 0)
++				goto msg_done;
++			if (!t->speed_hz && !t->bits_per_word)
++				par_override = 0;
++		}
++
++		if (!cs_active) {
++			ralink_spi_set_cs(rs, 1);
++			cs_active = 1;
++		}
++
++		if (t->len)
++			m->actual_length += ralink_spi_write_read(spi, t);
++
++		if (t->delay_usecs)
++			udelay(t->delay_usecs);
++
++		if (t->cs_change) {
++			ralink_spi_set_cs(rs, 0);
++			cs_active = 0;
++		}
++	}
++
++msg_done:
++	if (cs_active)
++		ralink_spi_set_cs(rs, 0);
++
++	m->status = status;
++	spi_finalize_current_message(master);
++
++	return 0;
++}
++
++static int ralink_spi_setup(struct spi_device *spi)
++{
++	struct ralink_spi *rs = spidev_to_ralink_spi(spi);
++
++	if ((spi->max_speed_hz == 0) ||
++	    (spi->max_speed_hz > (rs->sys_freq / 2)))
++		spi->max_speed_hz = (rs->sys_freq / 2);
++
++	if (spi->max_speed_hz < (rs->sys_freq / 128)) {
++		dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
++			spi->max_speed_hz);
++		return -EINVAL;
++	}
++
++	if (spi->bits_per_word != 0 && spi->bits_per_word != 8) {
++		dev_err(&spi->dev,
++			"setup: requested bits per words - os wrong %d bpw\n",
++			spi->bits_per_word);
++		return -EINVAL;
++	}
++
++	if (spi->bits_per_word == 0)
++		spi->bits_per_word = 8;
++
++	/*
++	 * baudrate & width will be set ralink_spi_setup_transfer
++	 */
++	return 0;
++}
++
++static void ralink_spi_reset(struct ralink_spi *rs)
++{
++	ralink_spi_write(rs, RAMIPS_SPI_CFG,
++			 SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
++			 SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
++	ralink_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
++}
++
++static int ralink_spi_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct ralink_spi *rs;
++	struct resource *r;
++	int status = 0;
++
++	master = spi_alloc_master(&pdev->dev, sizeof(*rs));
++	if (master == NULL) {
++		dev_dbg(&pdev->dev, "master allocation failed\n");
++		return -ENOMEM;
++	}
++
++	//if (pdev->id != -1)
++		master->bus_num = 0;
++
++	/* we support only mode 0, and no options */
++	master->mode_bits = 0;
++
++	master->setup = ralink_spi_setup;
++	master->transfer_one_message = ralink_spi_transfer_one_message;
++	master->num_chipselect = RALINK_NUM_CHIPSELECTS;
++	master->dev.of_node = pdev->dev.of_node;
++
++	dev_set_drvdata(&pdev->dev, master);
++
++	rs = spi_master_get_devdata(master);
++	rs->master = master;
++
++	rs->clk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(rs->clk)) {
++		status = PTR_ERR(rs->clk);
++		dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
++			status);
++		goto out_put_master;
++	}
++
++	status = clk_enable(rs->clk);
++	if (status)
++		goto out_put_clk;
++
++	rs->sys_freq = clk_get_rate(rs->clk);
++	spi_debug("%s: sys_freq: %u\n", __func__, rs->sys_freq);
++
++	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (r == NULL) {
++		status = -ENODEV;
++		goto out_disable_clk;
++	}
++
++	rs->base = devm_request_and_ioremap(&pdev->dev, r);
++	if (!rs->base) {
++		status = -EADDRNOTAVAIL;
++		goto out_disable_clk;
++	}
++
++	device_reset(&pdev->dev);
++
++	ralink_spi_reset(rs);
++
++	status = spi_register_master(master);
++	if (status)
++		goto out_disable_clk;
++
++	return 0;
++
++out_disable_clk:
++	clk_disable(rs->clk);
++out_put_clk:
++	clk_put(rs->clk);
++out_put_master:
++	spi_master_put(master);
++	return status;
++}
++
++static int ralink_spi_remove(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct ralink_spi *rs;
++
++	master = dev_get_drvdata(&pdev->dev);
++	rs = spi_master_get_devdata(master);
++
++	clk_disable(rs->clk);
++	clk_put(rs->clk);
++	spi_unregister_master(master);
++
++	return 0;
++}
++
++MODULE_ALIAS("platform:" DRIVER_NAME);
++
++static const struct of_device_id ralink_spi_match[] = {
++	{ .compatible = "ralink,rt2880-spi" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ralink_spi_match);
++
++static struct platform_driver ralink_spi_driver = {
++	.driver = {
++		.name = DRIVER_NAME,
++		.owner = THIS_MODULE,
++		.of_match_table = ralink_spi_match,
++	},
++	.probe = ralink_spi_probe,
++	.remove = ralink_spi_remove,
++};
++
++module_platform_driver(ralink_spi_driver);
++
++MODULE_DESCRIPTION("Ralink SPI driver");
++MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL");
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.8/0132-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch b/target/linux/ramips/patches-3.9/0145-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
index bff0799ed2..9be464c8dd 100644
--- a/target/linux/ramips/patches-3.8/0132-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
+++ b/target/linux/ramips/patches-3.9/0145-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
@@ -1,7 +1,7 @@
-From 15bcdbd78abacbe0986a1904d2e2b5dcfe780b5b Mon Sep 17 00:00:00 2001
+From cf52f453acdd9599a1be0fcf0e941bad62046cd4 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Tue, 22 Jan 2013 16:01:07 +0100
-Subject: [PATCH 132/137] serial: of: allow au1x00 and rt288x to load from OF
+Subject: [PATCH 145/164] serial: of: allow au1x00 and rt288x to load from OF
 
 In order to make serial_8250 loadable via OF on Au1x00 and Ralink WiSoC we need
 to default the iotype to UPIO_AU.
@@ -11,9 +11,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  drivers/tty/serial/of_serial.c |    5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)
 
+diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
+index b025d54..42f8550 100644
 --- a/drivers/tty/serial/of_serial.c
 +++ b/drivers/tty/serial/of_serial.c
-@@ -97,7 +97,10 @@ static int of_platform_serial_setup(stru
+@@ -98,7 +98,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
  		port->regshift = prop;
  
  	port->irq = irq_of_parse_and_map(np, 0);
@@ -25,3 +27,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
  		switch (prop) {
  		case 1:
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0146-serial-ralink-adds-mt7620-serial.patch b/target/linux/ramips/patches-3.9/0146-serial-ralink-adds-mt7620-serial.patch
new file mode 100644
index 0000000000..31fb18e296
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0146-serial-ralink-adds-mt7620-serial.patch
@@ -0,0 +1,28 @@
+From 070a93b895d420757fd66215f0dba81f4b7b36c0 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 15 Mar 2013 18:16:01 +0100
+Subject: [PATCH 146/164] serial: ralink: adds mt7620 serial
+
+Add the config symbol for Mediatek7620 SoC to SERIAL_8250_RT288X
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/tty/serial/8250/Kconfig |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
+index 80fe91e..f6d6820 100644
+--- a/drivers/tty/serial/8250/Kconfig
++++ b/drivers/tty/serial/8250/Kconfig
+@@ -296,7 +296,7 @@ config SERIAL_8250_EM
+ 
+ config SERIAL_8250_RT288X
+ 	bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
+-	depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
++	depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620)
+ 	help
+ 	  If you have a Ralink RT288x/RT305x SoC based board and want to use the
+ 	  serial port, say Y to this option. The driver can handle up to 2 serial
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0147-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-3.9/0147-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
new file mode 100644
index 0000000000..2689bb2882
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0147-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
@@ -0,0 +1,3446 @@
+From 5c328efd4f012365c9a08f7f2b23e293f639c43f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 2 May 2013 14:59:01 +0200
+Subject: [PATCH 147/164] mmc: MIPS: ralink: add sdhci for mt7620a SoC
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mmc/host/Kconfig        |   11 +
+ drivers/mmc/host/Makefile       |    1 +
+ drivers/mmc/host/mt6575_sd.h    | 1068 ++++++++++++++++++
+ drivers/mmc/host/sdhci-mt7620.c | 2314 +++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 3394 insertions(+)
+ create mode 100644 drivers/mmc/host/mt6575_sd.h
+ create mode 100644 drivers/mmc/host/sdhci-mt7620.c
+
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index d88219e..aa47e64 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -249,6 +249,17 @@ config MMC_SDHCI_BCM2835
+ 
+ 	  If unsure, say N.
+ 
++config MMC_SDHCI_MT7620
++	tristate "SDHCI platform support for the MT7620 SD/MMC Controller"
++	depends on SOC_MT7620
++	depends on MMC_SDHCI_PLTFM
++	select MMC_SDHCI_IO_ACCESSORS
++	help
++	  This selects the BCM2835 SD/MMC controller. If you have a BCM2835
++	  platform with SD or MMC devices, say Y or M here.
++
++	  If unsure, say N.
++
+ config MMC_OMAP
+ 	tristate "TI OMAP Multimedia Card Interface support"
+ 	depends on ARCH_OMAP
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index c380e3c..3b81db4 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -60,6 +60,7 @@ obj-$(CONFIG_MMC_SDHCI_TEGRA)		+= sdhci-tegra.o
+ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
+ obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
+ obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= sdhci-bcm2835.o
++obj-$(CONFIG_MMC_SDHCI_MT7620)		+= sdhci-mt7620.o
+ 
+ ifeq ($(CONFIG_CB710_DEBUG),y)
+ 	CFLAGS-cb710-mmc	+= -DDEBUG
+diff --git a/drivers/mmc/host/mt6575_sd.h b/drivers/mmc/host/mt6575_sd.h
+new file mode 100644
+index 0000000..406382c
+--- /dev/null
++++ b/drivers/mmc/host/mt6575_sd.h
+@@ -0,0 +1,1068 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ */
++/* MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#ifndef MT6575_SD_H
++#define MT6575_SD_H
++
++#include <linux/bitops.h>
++#include <linux/mmc/host.h>
++
++// #include <mach/mt6575_reg_base.h> /* --- by chhung */
++
++typedef void (*sdio_irq_handler_t)(void*);  /* external irq handler */
++typedef void (*pm_callback_t)(pm_message_t state, void *data);
++
++#define MSDC_CD_PIN_EN      (1 << 0)  /* card detection pin is wired   */
++#define MSDC_WP_PIN_EN      (1 << 1)  /* write protection pin is wired */
++#define MSDC_RST_PIN_EN     (1 << 2)  /* emmc reset pin is wired       */
++#define MSDC_SDIO_IRQ       (1 << 3)  /* use internal sdio irq (bus)   */
++#define MSDC_EXT_SDIO_IRQ   (1 << 4)  /* use external sdio irq         */
++#define MSDC_REMOVABLE      (1 << 5)  /* removable slot                */
++#define MSDC_SYS_SUSPEND    (1 << 6)  /* suspended by system           */
++#define MSDC_HIGHSPEED      (1 << 7)  /* high-speed mode support       */
++#define MSDC_UHS1           (1 << 8)  /* uhs-1 mode support            */
++#define MSDC_DDR            (1 << 9)  /* ddr mode support              */
++#define MSDC_SPE            (1 << 10)  /* special support              */
++#define MSDC_INTERNAL_CLK   (1 << 11)  /* Force Internal clock */
++#define MSDC_TABDRV	(1 << 12)  /* TABLET */
++
++
++#define MSDC_SMPL_RISING    (0)
++#define MSDC_SMPL_FALLING   (1)
++
++#define MSDC_CMD_PIN        (0)
++#define MSDC_DAT_PIN        (1)
++#define MSDC_CD_PIN         (2)
++#define MSDC_WP_PIN         (3)
++#define MSDC_RST_PIN        (4)
++
++enum {
++    MSDC_CLKSRC_26MHZ = 0,
++    MSDC_CLKSRC_197MHZ = 1,
++    MSDC_CLKSRC_208MHZ = 2
++};
++
++struct msdc_hw {
++	unsigned char  clk_src;          /* host clock source */
++	unsigned char  cmd_edge;         /* command latch edge */
++	unsigned char  data_edge;        /* data latch edge */
++	unsigned char  clk_drv;          /* clock pad driving */
++	unsigned char  cmd_drv;          /* command pad driving */
++	unsigned char  dat_drv;          /* data pad driving */
++	unsigned long  flags;            /* hardware capability flags */
++	unsigned long  data_pins;        /* data pins */
++	unsigned long  data_offset;      /* data address offset */
++
++	/* config gpio pull mode */
++	void (*config_gpio_pin)(int type, int pull);
++
++	/* external power control for card */
++	void (*ext_power_on)(void);
++	void (*ext_power_off)(void);
++
++	/* external sdio irq operations */
++	void (*request_sdio_eirq)(sdio_irq_handler_t sdio_irq_handler, void *data);
++	void (*enable_sdio_eirq)(void);
++	void (*disable_sdio_eirq)(void);
++
++	/* external cd irq operations */
++	void (*request_cd_eirq)(sdio_irq_handler_t cd_irq_handler, void *data);
++	void (*enable_cd_eirq)(void);
++	void (*disable_cd_eirq)(void);
++	int  (*get_cd_status)(void);
++
++	/* power management callback for external module */
++	void (*register_pm)(pm_callback_t pm_cb, void *data);
++};
++
++extern struct msdc_hw msdc0_hw;
++extern struct msdc_hw msdc1_hw;
++extern struct msdc_hw msdc2_hw;
++extern struct msdc_hw msdc3_hw;
++
++    
++/*--------------------------------------------------------------------------*/
++/* Common Macro                                                             */
++/*--------------------------------------------------------------------------*/
++#define REG_ADDR(x)                 ((volatile u32*)(base + OFFSET_##x))
++
++/*--------------------------------------------------------------------------*/
++/* Common Definition                                                        */
++/*--------------------------------------------------------------------------*/
++#define MSDC_FIFO_SZ            (128)
++#define MSDC_FIFO_THD           (64)  // (128)
++#define MSDC_NUM                (4)
++
++#define MSDC_MS                 (0)
++#define MSDC_SDMMC              (1)
++
++#define MSDC_MODE_UNKNOWN       (0)
++#define MSDC_MODE_PIO           (1)
++#define MSDC_MODE_DMA_BASIC     (2)
++#define MSDC_MODE_DMA_DESC      (3)
++#define MSDC_MODE_DMA_ENHANCED  (4)
++#define MSDC_MODE_MMC_STREAM    (5)
++
++#define MSDC_BUS_1BITS          (0)
++#define MSDC_BUS_4BITS          (1)
++#define MSDC_BUS_8BITS          (2)
++
++#define MSDC_BRUST_8B           (3)
++#define MSDC_BRUST_16B          (4)
++#define MSDC_BRUST_32B          (5)
++#define MSDC_BRUST_64B          (6)
++
++#define MSDC_PIN_PULL_NONE      (0)
++#define MSDC_PIN_PULL_DOWN      (1)
++#define MSDC_PIN_PULL_UP        (2)
++#define MSDC_PIN_KEEP           (3)
++
++#define MSDC_MAX_SCLK           (48000000) /* +/- by chhung */
++#define MSDC_MIN_SCLK           (260000)
++
++#define MSDC_AUTOCMD12          (0x0001)
++#define MSDC_AUTOCMD23          (0x0002)
++#define MSDC_AUTOCMD19          (0x0003)
++
++#define MSDC_EMMC_BOOTMODE0     (0)     /* Pull low CMD mode */
++#define MSDC_EMMC_BOOTMODE1     (1)     /* Reset CMD mode */
++
++enum {
++    RESP_NONE = 0,
++    RESP_R1,
++    RESP_R2,
++    RESP_R3,
++    RESP_R4,
++    RESP_R5,
++    RESP_R6,
++    RESP_R7,
++    RESP_R1B
++};
++
++/*--------------------------------------------------------------------------*/
++/* Register Offset                                                          */
++/*--------------------------------------------------------------------------*/
++#define OFFSET_MSDC_CFG         (0x0)
++#define OFFSET_MSDC_IOCON       (0x04)
++#define OFFSET_MSDC_PS          (0x08)
++#define OFFSET_MSDC_INT         (0x0c)
++#define OFFSET_MSDC_INTEN       (0x10)
++#define OFFSET_MSDC_FIFOCS      (0x14)
++#define OFFSET_MSDC_TXDATA      (0x18)
++#define OFFSET_MSDC_RXDATA      (0x1c)
++#define OFFSET_SDC_CFG          (0x30)
++#define OFFSET_SDC_CMD          (0x34)
++#define OFFSET_SDC_ARG          (0x38)
++#define OFFSET_SDC_STS          (0x3c)
++#define OFFSET_SDC_RESP0        (0x40)
++#define OFFSET_SDC_RESP1        (0x44)
++#define OFFSET_SDC_RESP2        (0x48)
++#define OFFSET_SDC_RESP3        (0x4c)
++#define OFFSET_SDC_BLK_NUM      (0x50)
++#define OFFSET_SDC_CSTS         (0x58)
++#define OFFSET_SDC_CSTS_EN      (0x5c)
++#define OFFSET_SDC_DCRC_STS     (0x60)
++#define OFFSET_EMMC_CFG0        (0x70)
++#define OFFSET_EMMC_CFG1        (0x74)
++#define OFFSET_EMMC_STS         (0x78)
++#define OFFSET_EMMC_IOCON       (0x7c)
++#define OFFSET_SDC_ACMD_RESP    (0x80)
++#define OFFSET_SDC_ACMD19_TRG   (0x84)
++#define OFFSET_SDC_ACMD19_STS   (0x88)
++#define OFFSET_MSDC_DMA_SA      (0x90)
++#define OFFSET_MSDC_DMA_CA      (0x94)
++#define OFFSET_MSDC_DMA_CTRL    (0x98)
++#define OFFSET_MSDC_DMA_CFG     (0x9c)
++#define OFFSET_MSDC_DBG_SEL     (0xa0)
++#define OFFSET_MSDC_DBG_OUT     (0xa4)
++#define OFFSET_MSDC_PATCH_BIT   (0xb0)
++#define OFFSET_MSDC_PATCH_BIT1  (0xb4)
++#define OFFSET_MSDC_PAD_CTL0    (0xe0)
++#define OFFSET_MSDC_PAD_CTL1    (0xe4)
++#define OFFSET_MSDC_PAD_CTL2    (0xe8)
++#define OFFSET_MSDC_PAD_TUNE    (0xec)
++#define OFFSET_MSDC_DAT_RDDLY0  (0xf0)
++#define OFFSET_MSDC_DAT_RDDLY1  (0xf4)
++#define OFFSET_MSDC_HW_DBG      (0xf8)
++#define OFFSET_MSDC_VERSION     (0x100)
++#define OFFSET_MSDC_ECO_VER     (0x104)
++
++/*--------------------------------------------------------------------------*/
++/* Register Address                                                         */
++/*--------------------------------------------------------------------------*/
++
++/* common register */
++#define MSDC_CFG                REG_ADDR(MSDC_CFG)
++#define MSDC_IOCON              REG_ADDR(MSDC_IOCON)
++#define MSDC_PS                 REG_ADDR(MSDC_PS)
++#define MSDC_INT                REG_ADDR(MSDC_INT)
++#define MSDC_INTEN              REG_ADDR(MSDC_INTEN)
++#define MSDC_FIFOCS             REG_ADDR(MSDC_FIFOCS)
++#define MSDC_TXDATA             REG_ADDR(MSDC_TXDATA)
++#define MSDC_RXDATA             REG_ADDR(MSDC_RXDATA)
++#define MSDC_PATCH_BIT0         REG_ADDR(MSDC_PATCH_BIT)
++
++/* sdmmc register */
++#define SDC_CFG                 REG_ADDR(SDC_CFG)
++#define SDC_CMD                 REG_ADDR(SDC_CMD)
++#define SDC_ARG                 REG_ADDR(SDC_ARG)
++#define SDC_STS                 REG_ADDR(SDC_STS)
++#define SDC_RESP0               REG_ADDR(SDC_RESP0)
++#define SDC_RESP1               REG_ADDR(SDC_RESP1)
++#define SDC_RESP2               REG_ADDR(SDC_RESP2)
++#define SDC_RESP3               REG_ADDR(SDC_RESP3)
++#define SDC_BLK_NUM             REG_ADDR(SDC_BLK_NUM)
++#define SDC_CSTS                REG_ADDR(SDC_CSTS)
++#define SDC_CSTS_EN             REG_ADDR(SDC_CSTS_EN)
++#define SDC_DCRC_STS            REG_ADDR(SDC_DCRC_STS)
++
++/* emmc register*/
++#define EMMC_CFG0               REG_ADDR(EMMC_CFG0)
++#define EMMC_CFG1               REG_ADDR(EMMC_CFG1)
++#define EMMC_STS                REG_ADDR(EMMC_STS)
++#define EMMC_IOCON              REG_ADDR(EMMC_IOCON)
++
++/* auto command register */
++#define SDC_ACMD_RESP           REG_ADDR(SDC_ACMD_RESP)
++#define SDC_ACMD19_TRG          REG_ADDR(SDC_ACMD19_TRG)
++#define SDC_ACMD19_STS          REG_ADDR(SDC_ACMD19_STS)
++
++/* dma register */
++#define MSDC_DMA_SA             REG_ADDR(MSDC_DMA_SA)
++#define MSDC_DMA_CA             REG_ADDR(MSDC_DMA_CA)
++#define MSDC_DMA_CTRL           REG_ADDR(MSDC_DMA_CTRL)
++#define MSDC_DMA_CFG            REG_ADDR(MSDC_DMA_CFG)
++
++/* pad ctrl register */
++#define MSDC_PAD_CTL0           REG_ADDR(MSDC_PAD_CTL0)
++#define MSDC_PAD_CTL1           REG_ADDR(MSDC_PAD_CTL1)
++#define MSDC_PAD_CTL2           REG_ADDR(MSDC_PAD_CTL2)
++
++/* data read delay */
++#define MSDC_DAT_RDDLY0         REG_ADDR(MSDC_DAT_RDDLY0)
++#define MSDC_DAT_RDDLY1         REG_ADDR(MSDC_DAT_RDDLY1)
++
++/* debug register */
++#define MSDC_DBG_SEL            REG_ADDR(MSDC_DBG_SEL)
++#define MSDC_DBG_OUT            REG_ADDR(MSDC_DBG_OUT)
++
++/* misc register */
++#define MSDC_PATCH_BIT          REG_ADDR(MSDC_PATCH_BIT)
++#define MSDC_PATCH_BIT1         REG_ADDR(MSDC_PATCH_BIT1)
++#define MSDC_PAD_TUNE           REG_ADDR(MSDC_PAD_TUNE)
++#define MSDC_HW_DBG             REG_ADDR(MSDC_HW_DBG)
++#define MSDC_VERSION            REG_ADDR(MSDC_VERSION)
++#define MSDC_ECO_VER            REG_ADDR(MSDC_ECO_VER) /* ECO Version */
++
++/*--------------------------------------------------------------------------*/
++/* Register Mask                                                            */
++/*--------------------------------------------------------------------------*/
++
++/* MSDC_CFG mask */
++#define MSDC_CFG_MODE           (0x1  << 0)     /* RW */
++#define MSDC_CFG_CKPDN          (0x1  << 1)     /* RW */
++#define MSDC_CFG_RST            (0x1  << 2)     /* RW */
++#define MSDC_CFG_PIO            (0x1  << 3)     /* RW */
++#define MSDC_CFG_CKDRVEN        (0x1  << 4)     /* RW */
++#define MSDC_CFG_BV18SDT        (0x1  << 5)     /* RW */
++#define MSDC_CFG_BV18PSS        (0x1  << 6)     /* R  */
++#define MSDC_CFG_CKSTB          (0x1  << 7)     /* R  */
++#define MSDC_CFG_CKDIV          (0xff << 8)     /* RW */
++#define MSDC_CFG_CKMOD          (0x3  << 16)    /* RW */
++
++/* MSDC_IOCON mask */
++#define MSDC_IOCON_SDR104CKS    (0x1  << 0)     /* RW */
++#define MSDC_IOCON_RSPL         (0x1  << 1)     /* RW */
++#define MSDC_IOCON_DSPL         (0x1  << 2)     /* RW */
++#define MSDC_IOCON_DDLSEL       (0x1  << 3)     /* RW */
++#define MSDC_IOCON_DDR50CKD     (0x1  << 4)     /* RW */
++#define MSDC_IOCON_DSPLSEL      (0x1  << 5)     /* RW */
++#define MSDC_IOCON_D0SPL        (0x1  << 16)    /* RW */
++#define MSDC_IOCON_D1SPL        (0x1  << 17)    /* RW */
++#define MSDC_IOCON_D2SPL        (0x1  << 18)    /* RW */
++#define MSDC_IOCON_D3SPL        (0x1  << 19)    /* RW */
++#define MSDC_IOCON_D4SPL        (0x1  << 20)    /* RW */
++#define MSDC_IOCON_D5SPL        (0x1  << 21)    /* RW */
++#define MSDC_IOCON_D6SPL        (0x1  << 22)    /* RW */
++#define MSDC_IOCON_D7SPL        (0x1  << 23)    /* RW */
++#define MSDC_IOCON_RISCSZ       (0x3  << 24)    /* RW */
++
++/* MSDC_PS mask */
++#define MSDC_PS_CDEN            (0x1  << 0)     /* RW */
++#define MSDC_PS_CDSTS           (0x1  << 1)     /* R  */
++#define MSDC_PS_CDDEBOUNCE      (0xf  << 12)    /* RW */
++#define MSDC_PS_DAT             (0xff << 16)    /* R  */
++#define MSDC_PS_CMD             (0x1  << 24)    /* R  */
++#define MSDC_PS_WP              (0x1UL<< 31)    /* R  */
++
++/* MSDC_INT mask */
++#define MSDC_INT_MMCIRQ         (0x1  << 0)     /* W1C */
++#define MSDC_INT_CDSC           (0x1  << 1)     /* W1C */
++#define MSDC_INT_ACMDRDY        (0x1  << 3)     /* W1C */
++#define MSDC_INT_ACMDTMO        (0x1  << 4)     /* W1C */
++#define MSDC_INT_ACMDCRCERR     (0x1  << 5)     /* W1C */
++#define MSDC_INT_DMAQ_EMPTY     (0x1  << 6)     /* W1C */
++#define MSDC_INT_SDIOIRQ        (0x1  << 7)     /* W1C */
++#define MSDC_INT_CMDRDY         (0x1  << 8)     /* W1C */
++#define MSDC_INT_CMDTMO         (0x1  << 9)     /* W1C */
++#define MSDC_INT_RSPCRCERR      (0x1  << 10)    /* W1C */
++#define MSDC_INT_CSTA           (0x1  << 11)    /* R */
++#define MSDC_INT_XFER_COMPL     (0x1  << 12)    /* W1C */
++#define MSDC_INT_DXFER_DONE     (0x1  << 13)    /* W1C */
++#define MSDC_INT_DATTMO         (0x1  << 14)    /* W1C */
++#define MSDC_INT_DATCRCERR      (0x1  << 15)    /* W1C */
++#define MSDC_INT_ACMD19_DONE    (0x1  << 16)    /* W1C */
++
++/* MSDC_INTEN mask */
++#define MSDC_INTEN_MMCIRQ       (0x1  << 0)     /* RW */
++#define MSDC_INTEN_CDSC         (0x1  << 1)     /* RW */
++#define MSDC_INTEN_ACMDRDY      (0x1  << 3)     /* RW */
++#define MSDC_INTEN_ACMDTMO      (0x1  << 4)     /* RW */
++#define MSDC_INTEN_ACMDCRCERR   (0x1  << 5)     /* RW */
++#define MSDC_INTEN_DMAQ_EMPTY   (0x1  << 6)     /* RW */
++#define MSDC_INTEN_SDIOIRQ      (0x1  << 7)     /* RW */
++#define MSDC_INTEN_CMDRDY       (0x1  << 8)     /* RW */
++#define MSDC_INTEN_CMDTMO       (0x1  << 9)     /* RW */
++#define MSDC_INTEN_RSPCRCERR    (0x1  << 10)    /* RW */
++#define MSDC_INTEN_CSTA         (0x1  << 11)    /* RW */
++#define MSDC_INTEN_XFER_COMPL   (0x1  << 12)    /* RW */
++#define MSDC_INTEN_DXFER_DONE   (0x1  << 13)    /* RW */
++#define MSDC_INTEN_DATTMO       (0x1  << 14)    /* RW */
++#define MSDC_INTEN_DATCRCERR    (0x1  << 15)    /* RW */
++#define MSDC_INTEN_ACMD19_DONE  (0x1  << 16)    /* RW */
++
++/* MSDC_FIFOCS mask */
++#define MSDC_FIFOCS_RXCNT       (0xff << 0)     /* R */
++#define MSDC_FIFOCS_TXCNT       (0xff << 16)    /* R */
++#define MSDC_FIFOCS_CLR         (0x1UL<< 31)    /* RW */
++
++/* SDC_CFG mask */
++#define SDC_CFG_SDIOINTWKUP     (0x1  << 0)     /* RW */
++#define SDC_CFG_INSWKUP         (0x1  << 1)     /* RW */
++#define SDC_CFG_BUSWIDTH        (0x3  << 16)    /* RW */
++#define SDC_CFG_SDIO            (0x1  << 19)    /* RW */
++#define SDC_CFG_SDIOIDE         (0x1  << 20)    /* RW */      
++#define SDC_CFG_INTATGAP        (0x1  << 21)    /* RW */
++#define SDC_CFG_DTOC            (0xffUL << 24)  /* RW */
++
++/* SDC_CMD mask */
++#define SDC_CMD_OPC             (0x3f << 0)     /* RW */
++#define SDC_CMD_BRK             (0x1  << 6)     /* RW */
++#define SDC_CMD_RSPTYP          (0x7  << 7)     /* RW */
++#define SDC_CMD_DTYP            (0x3  << 11)    /* RW */
++#define SDC_CMD_DTYP            (0x3  << 11)    /* RW */
++#define SDC_CMD_RW              (0x1  << 13)    /* RW */
++#define SDC_CMD_STOP            (0x1  << 14)    /* RW */
++#define SDC_CMD_GOIRQ           (0x1  << 15)    /* RW */
++#define SDC_CMD_BLKLEN          (0xfff<< 16)    /* RW */
++#define SDC_CMD_AUTOCMD         (0x3  << 28)    /* RW */
++#define SDC_CMD_VOLSWTH         (0x1  << 30)    /* RW */
++
++/* SDC_STS mask */
++#define SDC_STS_SDCBUSY         (0x1  << 0)     /* RW */
++#define SDC_STS_CMDBUSY         (0x1  << 1)     /* RW */
++#define SDC_STS_SWR_COMPL       (0x1  << 31)    /* RW */
++
++/* SDC_DCRC_STS mask */
++#define SDC_DCRC_STS_NEG        (0xf  << 8)     /* RO */
++#define SDC_DCRC_STS_POS        (0xff << 0)     /* RO */
++
++/* EMMC_CFG0 mask */
++#define EMMC_CFG0_BOOTSTART     (0x1  << 0)     /* W */
++#define EMMC_CFG0_BOOTSTOP      (0x1  << 1)     /* W */
++#define EMMC_CFG0_BOOTMODE      (0x1  << 2)     /* RW */
++#define EMMC_CFG0_BOOTACKDIS    (0x1  << 3)     /* RW */
++#define EMMC_CFG0_BOOTWDLY      (0x7  << 12)    /* RW */
++#define EMMC_CFG0_BOOTSUPP      (0x1  << 15)    /* RW */
++
++/* EMMC_CFG1 mask */
++#define EMMC_CFG1_BOOTDATTMC    (0xfffff << 0)  /* RW */
++#define EMMC_CFG1_BOOTACKTMC    (0xfffUL << 20) /* RW */
++
++/* EMMC_STS mask */
++#define EMMC_STS_BOOTCRCERR     (0x1  << 0)     /* W1C */
++#define EMMC_STS_BOOTACKERR     (0x1  << 1)     /* W1C */
++#define EMMC_STS_BOOTDATTMO     (0x1  << 2)     /* W1C */
++#define EMMC_STS_BOOTACKTMO     (0x1  << 3)     /* W1C */
++#define EMMC_STS_BOOTUPSTATE    (0x1  << 4)     /* R */
++#define EMMC_STS_BOOTACKRCV     (0x1  << 5)     /* W1C */
++#define EMMC_STS_BOOTDATRCV     (0x1  << 6)     /* R */
++
++/* EMMC_IOCON mask */
++#define EMMC_IOCON_BOOTRST      (0x1  << 0)     /* RW */
++
++/* SDC_ACMD19_TRG mask */
++#define SDC_ACMD19_TRG_TUNESEL  (0xf  << 0)     /* RW */
++
++/* MSDC_DMA_CTRL mask */
++#define MSDC_DMA_CTRL_START     (0x1  << 0)     /* W */
++#define MSDC_DMA_CTRL_STOP      (0x1  << 1)     /* W */
++#define MSDC_DMA_CTRL_RESUME    (0x1  << 2)     /* W */
++#define MSDC_DMA_CTRL_MODE      (0x1  << 8)     /* RW */
++#define MSDC_DMA_CTRL_LASTBUF   (0x1  << 10)    /* RW */
++#define MSDC_DMA_CTRL_BRUSTSZ   (0x7  << 12)    /* RW */
++#define MSDC_DMA_CTRL_XFERSZ    (0xffffUL << 16)/* RW */
++
++/* MSDC_DMA_CFG mask */
++#define MSDC_DMA_CFG_STS        (0x1  << 0)     /* R */
++#define MSDC_DMA_CFG_DECSEN     (0x1  << 1)     /* RW */
++#define MSDC_DMA_CFG_BDCSERR    (0x1  << 4)     /* R */
++#define MSDC_DMA_CFG_GPDCSERR   (0x1  << 5)     /* R */
++
++/* MSDC_PATCH_BIT mask */
++#define MSDC_PATCH_BIT_WFLSMODE (0x1  << 0)     /* RW */
++#define MSDC_PATCH_BIT_ODDSUPP  (0x1  << 1)     /* RW */
++#define MSDC_PATCH_BIT_CKGEN_CK (0x1  << 6)     /* E2: Fixed to 1 */
++#define MSDC_PATCH_BIT_IODSSEL  (0x1  << 16)    /* RW */
++#define MSDC_PATCH_BIT_IOINTSEL (0x1  << 17)    /* RW */
++#define MSDC_PATCH_BIT_BUSYDLY  (0xf  << 18)    /* RW */
++#define MSDC_PATCH_BIT_WDOD     (0xf  << 22)    /* RW */
++#define MSDC_PATCH_BIT_IDRTSEL  (0x1  << 26)    /* RW */
++#define MSDC_PATCH_BIT_CMDFSEL  (0x1  << 27)    /* RW */
++#define MSDC_PATCH_BIT_INTDLSEL (0x1  << 28)    /* RW */
++#define MSDC_PATCH_BIT_SPCPUSH  (0x1  << 29)    /* RW */
++#define MSDC_PATCH_BIT_DECRCTMO (0x1  << 30)    /* RW */
++
++/* MSDC_PATCH_BIT1 mask */
++#define MSDC_PATCH_BIT1_WRDAT_CRCS  (0x7 << 3)
++#define MSDC_PATCH_BIT1_CMD_RSP     (0x7 << 0)
++
++/* MSDC_PAD_CTL0 mask */
++#define MSDC_PAD_CTL0_CLKDRVN   (0x7  << 0)     /* RW */
++#define MSDC_PAD_CTL0_CLKDRVP   (0x7  << 4)     /* RW */
++#define MSDC_PAD_CTL0_CLKSR     (0x1  << 8)     /* RW */
++#define MSDC_PAD_CTL0_CLKPD     (0x1  << 16)    /* RW */
++#define MSDC_PAD_CTL0_CLKPU     (0x1  << 17)    /* RW */
++#define MSDC_PAD_CTL0_CLKSMT    (0x1  << 18)    /* RW */
++#define MSDC_PAD_CTL0_CLKIES    (0x1  << 19)    /* RW */
++#define MSDC_PAD_CTL0_CLKTDSEL  (0xf  << 20)    /* RW */
++#define MSDC_PAD_CTL0_CLKRDSEL  (0xffUL<< 24)   /* RW */
++
++/* MSDC_PAD_CTL1 mask */
++#define MSDC_PAD_CTL1_CMDDRVN   (0x7  << 0)     /* RW */
++#define MSDC_PAD_CTL1_CMDDRVP   (0x7  << 4)     /* RW */
++#define MSDC_PAD_CTL1_CMDSR     (0x1  << 8)     /* RW */
++#define MSDC_PAD_CTL1_CMDPD     (0x1  << 16)    /* RW */
++#define MSDC_PAD_CTL1_CMDPU     (0x1  << 17)    /* RW */
++#define MSDC_PAD_CTL1_CMDSMT    (0x1  << 18)    /* RW */
++#define MSDC_PAD_CTL1_CMDIES    (0x1  << 19)    /* RW */
++#define MSDC_PAD_CTL1_CMDTDSEL  (0xf  << 20)    /* RW */
++#define MSDC_PAD_CTL1_CMDRDSEL  (0xffUL<< 24)   /* RW */
++
++/* MSDC_PAD_CTL2 mask */
++#define MSDC_PAD_CTL2_DATDRVN   (0x7  << 0)     /* RW */
++#define MSDC_PAD_CTL2_DATDRVP   (0x7  << 4)     /* RW */
++#define MSDC_PAD_CTL2_DATSR     (0x1  << 8)     /* RW */
++#define MSDC_PAD_CTL2_DATPD     (0x1  << 16)    /* RW */
++#define MSDC_PAD_CTL2_DATPU     (0x1  << 17)    /* RW */
++#define MSDC_PAD_CTL2_DATIES    (0x1  << 19)    /* RW */
++#define MSDC_PAD_CTL2_DATSMT    (0x1  << 18)    /* RW */
++#define MSDC_PAD_CTL2_DATTDSEL  (0xf  << 20)    /* RW */
++#define MSDC_PAD_CTL2_DATRDSEL  (0xffUL<< 24)   /* RW */
++
++/* MSDC_PAD_TUNE mask */
++#define MSDC_PAD_TUNE_DATWRDLY  (0x1F << 0)     /* RW */
++#define MSDC_PAD_TUNE_DATRRDLY  (0x1F << 8)     /* RW */
++#define MSDC_PAD_TUNE_CMDRDLY   (0x1F << 16)    /* RW */
++#define MSDC_PAD_TUNE_CMDRRDLY  (0x1FUL << 22)  /* RW */
++#define MSDC_PAD_TUNE_CLKTXDLY  (0x1FUL << 27)  /* RW */
++
++/* MSDC_DAT_RDDLY0/1 mask */
++#define MSDC_DAT_RDDLY0_D0      (0x1F << 0)     /* RW */
++#define MSDC_DAT_RDDLY0_D1      (0x1F << 8)     /* RW */
++#define MSDC_DAT_RDDLY0_D2      (0x1F << 16)    /* RW */
++#define MSDC_DAT_RDDLY0_D3      (0x1F << 24)    /* RW */
++
++#define MSDC_DAT_RDDLY1_D4      (0x1F << 0)     /* RW */
++#define MSDC_DAT_RDDLY1_D5      (0x1F << 8)     /* RW */
++#define MSDC_DAT_RDDLY1_D6      (0x1F << 16)    /* RW */
++#define MSDC_DAT_RDDLY1_D7      (0x1F << 24)    /* RW */
++
++#define MSDC_CKGEN_MSDC_DLY_SEL   (0x1F<<10)
++#define MSDC_INT_DAT_LATCH_CK_SEL  (0x7<<7)
++#define MSDC_CKGEN_MSDC_CK_SEL     (0x1<<6)
++#define CARD_READY_FOR_DATA             (1<<8)
++#define CARD_CURRENT_STATE(x)           ((x&0x00001E00)>>9)
++
++/*--------------------------------------------------------------------------*/
++/* Descriptor Structure                                                     */
++/*--------------------------------------------------------------------------*/
++typedef struct {
++    u32  hwo:1; /* could be changed by hw */
++    u32  bdp:1;
++    u32  rsv0:6;
++    u32  chksum:8;
++    u32  intr:1;
++    u32  rsv1:15;
++    void *next;
++    void *ptr;
++    u32  buflen:16;
++    u32  extlen:8;
++    u32  rsv2:8;
++    u32  arg;
++    u32  blknum;
++    u32  cmd;
++} gpd_t;
++
++typedef struct {
++    u32  eol:1;
++    u32  rsv0:7;
++    u32  chksum:8;
++    u32  rsv1:1;
++    u32  blkpad:1;
++    u32  dwpad:1;
++    u32  rsv2:13;
++    void *next;
++    void *ptr;
++    u32  buflen:16;
++    u32  rsv3:16;
++} bd_t;
++
++/*--------------------------------------------------------------------------*/
++/* Register Debugging Structure                                             */
++/*--------------------------------------------------------------------------*/
++
++typedef struct {
++    u32 msdc:1;
++    u32 ckpwn:1;
++    u32 rst:1;
++    u32 pio:1;
++    u32 ckdrven:1;
++    u32 start18v:1;
++    u32 pass18v:1;
++    u32 ckstb:1;
++    u32 ckdiv:8;
++    u32 ckmod:2;
++    u32 pad:14;		
++} msdc_cfg_reg;
++typedef struct {
++    u32 sdr104cksel:1;
++    u32 rsmpl:1;
++    u32 dsmpl:1;
++    u32 ddlysel:1;
++    u32 ddr50ckd:1;
++    u32 dsplsel:1;
++    u32 pad1:10;
++    u32 d0spl:1;
++    u32 d1spl:1;
++    u32 d2spl:1;
++    u32 d3spl:1;
++    u32 d4spl:1;
++    u32 d5spl:1;
++    u32 d6spl:1;
++    u32 d7spl:1;
++    u32 riscsz:1;
++    u32 pad2:7;
++} msdc_iocon_reg;
++typedef struct {
++    u32 cden:1;
++    u32 cdsts:1;
++    u32 pad1:10;
++    u32 cddebounce:4;
++    u32 dat:8;
++    u32 cmd:1;
++    u32 pad2:6;
++    u32 wp:1;
++} msdc_ps_reg;
++typedef struct {
++    u32 mmcirq:1;
++    u32 cdsc:1;
++    u32 pad1:1;
++    u32 atocmdrdy:1;
++    u32 atocmdtmo:1;
++    u32 atocmdcrc:1;
++    u32 dmaqempty:1;
++    u32 sdioirq:1;
++    u32 cmdrdy:1;
++    u32 cmdtmo:1;
++    u32 rspcrc:1;
++    u32 csta:1;
++    u32 xfercomp:1;
++    u32 dxferdone:1;
++    u32 dattmo:1;
++    u32 datcrc:1;
++    u32 atocmd19done:1;
++    u32 pad2:15;
++} msdc_int_reg;
++typedef struct {
++    u32 mmcirq:1;
++    u32 cdsc:1;
++    u32 pad1:1;
++    u32 atocmdrdy:1;
++    u32 atocmdtmo:1;
++    u32 atocmdcrc:1;
++    u32 dmaqempty:1;
++    u32 sdioirq:1;
++    u32 cmdrdy:1;
++    u32 cmdtmo:1;
++    u32 rspcrc:1;
++    u32 csta:1;
++    u32 xfercomp:1;
++    u32 dxferdone:1;
++    u32 dattmo:1;
++    u32 datcrc:1;
++    u32 atocmd19done:1;
++    u32 pad2:15;
++} msdc_inten_reg;
++typedef struct {
++    u32 rxcnt:8;
++    u32 pad1:8;
++    u32 txcnt:8;
++    u32 pad2:7;
++    u32 clr:1;
++} msdc_fifocs_reg;
++typedef struct {
++    u32 val;
++} msdc_txdat_reg;
++typedef struct {
++    u32 val;
++} msdc_rxdat_reg;
++typedef struct {
++    u32 sdiowkup:1;
++    u32 inswkup:1;
++    u32 pad1:14;
++    u32 buswidth:2;
++    u32 pad2:1;
++    u32 sdio:1;
++    u32 sdioide:1;
++    u32 intblkgap:1;
++    u32 pad4:2;
++    u32 dtoc:8;
++} sdc_cfg_reg;
++typedef struct {
++    u32 cmd:6;
++    u32 brk:1;
++    u32 rsptyp:3;
++    u32 pad1:1;
++    u32 dtype:2;
++    u32 rw:1;
++    u32 stop:1;
++    u32 goirq:1;    
++    u32 blklen:12;
++    u32 atocmd:2;
++    u32 volswth:1;
++    u32 pad2:1;
++} sdc_cmd_reg;
++typedef struct {
++    u32 arg;
++} sdc_arg_reg;
++typedef struct {
++    u32 sdcbusy:1;
++    u32 cmdbusy:1;
++    u32 pad:29;
++    u32 swrcmpl:1;
++} sdc_sts_reg;
++typedef struct {
++    u32 val;
++} sdc_resp0_reg;
++typedef struct {
++    u32 val;	
++} sdc_resp1_reg;
++typedef struct {
++    u32 val;	
++} sdc_resp2_reg;
++typedef struct {
++    u32 val;	
++} sdc_resp3_reg;
++typedef struct {
++    u32 num;	
++} sdc_blknum_reg;
++typedef struct {
++    u32 sts;
++} sdc_csts_reg;
++typedef struct {
++    u32 sts;
++} sdc_cstsen_reg;
++typedef struct {
++    u32 datcrcsts:8;
++    u32 ddrcrcsts:4;
++    u32 pad:20;
++} sdc_datcrcsts_reg;
++typedef struct {
++    u32 bootstart:1;
++    u32 bootstop:1;
++    u32 bootmode:1;
++    u32 pad1:9;
++    u32 bootwaidly:3;
++    u32 bootsupp:1;
++    u32 pad2:16;
++} emmc_cfg0_reg;
++typedef struct {
++    u32 bootcrctmc:16;
++    u32 pad:4;
++    u32 bootacktmc:12;
++} emmc_cfg1_reg;
++typedef struct {
++    u32 bootcrcerr:1;
++    u32 bootackerr:1;
++    u32 bootdattmo:1;
++    u32 bootacktmo:1;
++    u32 bootupstate:1;
++    u32 bootackrcv:1;
++    u32 bootdatrcv:1;
++    u32 pad:25;
++} emmc_sts_reg;
++typedef struct {
++    u32 bootrst:1;
++    u32 pad:31;
++} emmc_iocon_reg;
++typedef struct {
++    u32 val;
++} msdc_acmd_resp_reg;
++typedef struct {
++    u32 tunesel:4;
++    u32 pad:28;
++} msdc_acmd19_trg_reg;
++typedef struct {
++    u32 val;
++} msdc_acmd19_sts_reg;
++typedef struct {
++    u32 addr;
++} msdc_dma_sa_reg;
++typedef struct {
++    u32 addr;
++} msdc_dma_ca_reg;
++typedef struct {
++    u32 start:1;
++    u32 stop:1;
++    u32 resume:1;
++    u32 pad1:5;
++    u32 mode:1;
++    u32 pad2:1;
++    u32 lastbuf:1;
++    u32 pad3:1;
++    u32 brustsz:3;
++    u32 pad4:1;
++    u32 xfersz:16;
++} msdc_dma_ctrl_reg;
++typedef struct {
++    u32 status:1;
++    u32 decsen:1;
++    u32 pad1:2;
++    u32 bdcsen:1;
++    u32 gpdcsen:1;
++    u32 pad2:26;
++} msdc_dma_cfg_reg;
++typedef struct {
++    u32 sel:16;
++    u32 pad2:16;
++} msdc_dbg_sel_reg;
++typedef struct {
++    u32 val;
++} msdc_dbg_out_reg;
++typedef struct {
++    u32 clkdrvn:3;
++    u32 rsv0:1;
++    u32 clkdrvp:3;
++    u32 rsv1:1;
++    u32 clksr:1;
++    u32 rsv2:7;
++    u32 clkpd:1;    
++    u32 clkpu:1;
++    u32 clksmt:1;
++    u32 clkies:1;
++    u32 clktdsel:4;
++    u32 clkrdsel:8;
++} msdc_pad_ctl0_reg;
++typedef struct {
++    u32 cmddrvn:3;
++    u32 rsv0:1;    
++    u32 cmddrvp:3;
++    u32 rsv1:1;
++    u32 cmdsr:1;
++    u32 rsv2:7;
++    u32 cmdpd:1;    
++    u32 cmdpu:1;
++    u32 cmdsmt:1;
++    u32 cmdies:1;
++    u32 cmdtdsel:4;
++    u32 cmdrdsel:8;
++} msdc_pad_ctl1_reg;
++typedef struct {
++    u32 datdrvn:3;
++    u32 rsv0:1;
++    u32 datdrvp:3;
++    u32 rsv1:1;
++    u32 datsr:1;
++    u32 rsv2:7;
++    u32 datpd:1;    
++    u32 datpu:1;
++    u32 datsmt:1;
++    u32 daties:1;
++    u32 dattdsel:4;
++    u32 datrdsel:8;
++} msdc_pad_ctl2_reg;
++typedef struct {
++    u32 wrrxdly:3;
++    u32 pad1:5;
++    u32 rdrxdly:8;
++    u32 pad2:16;
++} msdc_pad_tune_reg;
++typedef struct {
++    u32 dat0:5;
++    u32 rsv0:3;
++    u32 dat1:5;
++    u32 rsv1:3;
++    u32 dat2:5;
++    u32 rsv2:3;
++    u32 dat3:5;
++    u32 rsv3:3;    
++} msdc_dat_rddly0;
++typedef struct {
++    u32 dat4:5;
++    u32 rsv4:3;
++    u32 dat5:5;
++    u32 rsv5:3;
++    u32 dat6:5;
++    u32 rsv6:3;
++    u32 dat7:5;
++    u32 rsv7:3;
++} msdc_dat_rddly1;
++typedef struct {
++    u32 dbg0sel:8;
++    u32 dbg1sel:6;
++    u32 pad1:2;
++    u32 dbg2sel:6;
++    u32 pad2:2;
++    u32 dbg3sel:6;
++    u32 pad3:2;
++} msdc_hw_dbg_reg;
++typedef struct {
++    u32 val;
++} msdc_version_reg;
++typedef struct {
++    u32 val;
++} msdc_eco_ver_reg;
++
++struct msdc_regs {
++    msdc_cfg_reg        msdc_cfg;      /* base+0x00h */
++    msdc_iocon_reg      msdc_iocon;    /* base+0x04h */
++    msdc_ps_reg         msdc_ps;       /* base+0x08h */
++    msdc_int_reg        msdc_int;      /* base+0x0ch */
++    msdc_inten_reg      msdc_inten;    /* base+0x10h */
++    msdc_fifocs_reg     msdc_fifocs;   /* base+0x14h */
++    msdc_txdat_reg      msdc_txdat;    /* base+0x18h */
++    msdc_rxdat_reg      msdc_rxdat;    /* base+0x1ch */
++    u32                 rsv1[4];
++    sdc_cfg_reg         sdc_cfg;       /* base+0x30h */
++    sdc_cmd_reg         sdc_cmd;       /* base+0x34h */
++    sdc_arg_reg         sdc_arg;       /* base+0x38h */
++    sdc_sts_reg         sdc_sts;       /* base+0x3ch */
++    sdc_resp0_reg       sdc_resp0;     /* base+0x40h */
++    sdc_resp1_reg       sdc_resp1;     /* base+0x44h */
++    sdc_resp2_reg       sdc_resp2;     /* base+0x48h */
++    sdc_resp3_reg       sdc_resp3;     /* base+0x4ch */
++    sdc_blknum_reg      sdc_blknum;    /* base+0x50h */
++    u32                 rsv2[1];
++    sdc_csts_reg        sdc_csts;      /* base+0x58h */
++    sdc_cstsen_reg      sdc_cstsen;    /* base+0x5ch */
++    sdc_datcrcsts_reg   sdc_dcrcsta;   /* base+0x60h */
++    u32                 rsv3[3];
++    emmc_cfg0_reg       emmc_cfg0;     /* base+0x70h */
++    emmc_cfg1_reg       emmc_cfg1;     /* base+0x74h */
++    emmc_sts_reg        emmc_sts;      /* base+0x78h */
++    emmc_iocon_reg      emmc_iocon;    /* base+0x7ch */
++    msdc_acmd_resp_reg  acmd_resp;     /* base+0x80h */
++    msdc_acmd19_trg_reg acmd19_trg;    /* base+0x84h */
++    msdc_acmd19_sts_reg acmd19_sts;    /* base+0x88h */
++    u32                 rsv4[1];
++    msdc_dma_sa_reg     dma_sa;        /* base+0x90h */
++    msdc_dma_ca_reg     dma_ca;        /* base+0x94h */
++    msdc_dma_ctrl_reg   dma_ctrl;      /* base+0x98h */
++    msdc_dma_cfg_reg    dma_cfg;       /* base+0x9ch */
++    msdc_dbg_sel_reg    dbg_sel;       /* base+0xa0h */
++    msdc_dbg_out_reg    dbg_out;       /* base+0xa4h */
++    u32                 rsv5[2];
++    u32                 patch0;        /* base+0xb0h */
++    u32                 patch1;        /* base+0xb4h */
++    u32                 rsv6[10];
++    msdc_pad_ctl0_reg   pad_ctl0;      /* base+0xe0h */
++    msdc_pad_ctl1_reg   pad_ctl1;      /* base+0xe4h */
++    msdc_pad_ctl2_reg   pad_ctl2;      /* base+0xe8h */
++    msdc_pad_tune_reg   pad_tune;      /* base+0xech */
++    msdc_dat_rddly0     dat_rddly0;    /* base+0xf0h */
++    msdc_dat_rddly1     dat_rddly1;    /* base+0xf4h */
++    msdc_hw_dbg_reg     hw_dbg;        /* base+0xf8h */
++    u32                 rsv7[1];       
++    msdc_version_reg    version;       /* base+0x100h */
++    msdc_eco_ver_reg    eco_ver;       /* base+0x104h */
++};
++
++struct scatterlist_ex {
++    u32 cmd;
++    u32 arg;
++    u32 sglen;
++    struct scatterlist *sg;
++};
++
++#define DMA_FLAG_NONE       (0x00000000)
++#define DMA_FLAG_EN_CHKSUM  (0x00000001)
++#define DMA_FLAG_PAD_BLOCK  (0x00000002)
++#define DMA_FLAG_PAD_DWORD  (0x00000004)
++
++struct msdc_dma {
++    u32 flags;                   /* flags */
++    u32 xfersz;                  /* xfer size in bytes */
++    u32 sglen;                   /* size of scatter list */
++    u32 blklen;                  /* block size */
++    struct scatterlist *sg;      /* I/O scatter list */
++    struct scatterlist_ex *esg;  /* extended I/O scatter list */
++    u8  mode;                    /* dma mode        */
++    u8  burstsz;                 /* burst size      */
++    u8  intr;                    /* dma done interrupt */
++    u8  padding;                 /* padding */
++    u32 cmd;                     /* enhanced mode command */
++    u32 arg;                     /* enhanced mode arg */
++    u32 rsp;                     /* enhanced mode command response */
++    u32 autorsp;                 /* auto command response */
++
++    gpd_t *gpd;                  /* pointer to gpd array */
++    bd_t  *bd;                   /* pointer to bd array */
++    dma_addr_t gpd_addr;         /* the physical address of gpd array */
++    dma_addr_t bd_addr;          /* the physical address of bd array */
++    u32 used_gpd;                /* the number of used gpd elements */
++    u32 used_bd;                 /* the number of used bd elements */
++};
++
++struct msdc_host
++{
++    struct msdc_hw              *hw;
++
++    struct mmc_host             *mmc;           /* mmc structure */
++    struct mmc_command          *cmd;
++    struct mmc_data             *data;
++    struct mmc_request          *mrq; 
++    int                         cmd_rsp;
++    int                         cmd_rsp_done;
++    int                         cmd_r1b_done;
++
++    int                         error; 
++    spinlock_t                  lock;           /* mutex */
++    struct semaphore            sem; 
++
++    u32                         blksz;          /* host block size */
++    u32                         base;           /* host base address */    
++    int                         id;             /* host id */
++    int                         pwr_ref;        /* core power reference count */
++
++    u32                         xfer_size;      /* total transferred size */
++
++    struct msdc_dma             dma;            /* dma channel */
++    u32                         dma_addr;       /* dma transfer address */
++    u32                         dma_left_size;  /* dma transfer left size */
++    u32                         dma_xfer_size;  /* dma transfer size in bytes */
++    int                         dma_xfer;       /* dma transfer mode */
++
++    u32                         timeout_ns;     /* data timeout ns */
++    u32                         timeout_clks;   /* data timeout clks */
++
++    atomic_t                    abort;          /* abort transfer */
++
++    int                         irq;            /* host interrupt */
++
++    struct tasklet_struct       card_tasklet;
++
++    struct completion           cmd_done;
++    struct completion           xfer_done;
++    struct pm_message           pm_state;
++
++    u32                         mclk;           /* mmc subsystem clock */
++    u32                         hclk;           /* host clock speed */		
++    u32                         sclk;           /* SD/MS clock speed */
++    u8                          core_clkon;     /* Host core clock on ? */
++    u8                          card_clkon;     /* Card clock on ? */
++    u8                          core_power;     /* core power */    
++    u8                          power_mode;     /* host power mode */
++    u8                          card_inserted;  /* card inserted ? */
++    u8                          suspend;        /* host suspended ? */    
++    u8                          reserved;
++    u8                          app_cmd;        /* for app command */     
++    u32                         app_cmd_arg;    
++    u64                         starttime;
++};
++
++static inline unsigned int uffs(unsigned int x)
++{
++    unsigned int r = 1;
++
++    if (!x)
++        return 0;
++    if (!(x & 0xffff)) {
++        x >>= 16;
++        r += 16;
++    }
++    if (!(x & 0xff)) {
++        x >>= 8;
++        r += 8;
++    }
++    if (!(x & 0xf)) {
++        x >>= 4;
++        r += 4;
++    }
++    if (!(x & 3)) {
++        x >>= 2;
++        r += 2;
++    }
++    if (!(x & 1)) {
++        x >>= 1;
++        r += 1;
++    }
++    return r;
++}
++#define sdr_read8(reg)           __raw_readb(reg)
++#define sdr_read16(reg)          __raw_readw(reg)
++#define sdr_read32(reg)          __raw_readl(reg)
++#define sdr_write8(reg,val)      __raw_writeb(val,reg)
++#define sdr_write16(reg,val)     __raw_writew(val,reg)
++#define sdr_write32(reg,val)     __raw_writel(val,reg)
++
++#define sdr_set_bits(reg,bs)     ((*(volatile u32*)(reg)) |= (u32)(bs))
++#define sdr_clr_bits(reg,bs)     ((*(volatile u32*)(reg)) &= ~((u32)(bs)))
++
++#define sdr_set_field(reg,field,val) \
++    do {	\
++        volatile unsigned int tv = sdr_read32(reg);	\
++        tv &= ~(field); \
++        tv |= ((val) << (uffs((unsigned int)field) - 1)); \
++        sdr_write32(reg,tv); \
++    } while(0)
++#define sdr_get_field(reg,field,val) \
++    do {	\
++        volatile unsigned int tv = sdr_read32(reg);	\
++        val = ((tv & (field)) >> (uffs((unsigned int)field) - 1)); \
++    } while(0)
++
++#endif
++
+diff --git a/drivers/mmc/host/sdhci-mt7620.c b/drivers/mmc/host/sdhci-mt7620.c
+new file mode 100644
+index 0000000..a3cb5e4
+--- /dev/null
++++ b/drivers/mmc/host/sdhci-mt7620.c
+@@ -0,0 +1,2314 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ *
++ * MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/spinlock.h>
++#include <linux/timer.h>
++#include <linux/ioport.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/of_platform.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/blkdev.h>
++#include <linux/slab.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/card.h>
++#include <linux/mmc/core.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/sd.h>
++#include <linux/mmc/sdio.h>
++#include <linux/dma-mapping.h>
++
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/version.h>
++#include <linux/pm.h>
++
++#define MSDC_SMPL_FALLING   (1)
++#define MSDC_CD_PIN_EN      (1 << 0)  /* card detection pin is wired   */
++#define MSDC_WP_PIN_EN      (1 << 1)  /* write protection pin is wired */
++#define MSDC_REMOVABLE      (1 << 5)  /* removable slot                */
++#define MSDC_SYS_SUSPEND    (1 << 6)  /* suspended by system           */
++#define MSDC_HIGHSPEED      (1 << 7)
++
++#define IRQ_SDC 22
++
++#include <asm/dma.h>
++
++#include "mt6575_sd.h"
++
++#define DRV_NAME            "mtk-sd"
++
++#define HOST_MAX_NUM        (1) /* +/- by chhung */
++
++#define HOST_MAX_MCLK       (48000000) /* +/- by chhung */
++#define HOST_MIN_MCLK       (260000)
++
++#define HOST_MAX_BLKSZ      (2048)
++
++#define MSDC_OCR_AVAIL      (MMC_VDD_28_29 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33)
++
++#define GPIO_PULL_DOWN      (0)
++#define GPIO_PULL_UP        (1)
++
++#define DEFAULT_DEBOUNCE    (8)       /* 8 cycles */
++#define DEFAULT_DTOC        (40)      /* data timeout counter. 65536x40 sclk. */
++
++#define CMD_TIMEOUT         (HZ/10)     /* 100ms */
++#define DAT_TIMEOUT         (HZ/2 * 5)  /* 500ms x5 */
++
++#define MAX_DMA_CNT         (64 * 1024 - 512)   /* a single transaction for WIFI may be 50K*/
++
++#define MAX_GPD_NUM         (1 + 1)  /* one null gpd */
++#define MAX_BD_NUM          (1024)
++#define MAX_BD_PER_GPD      (MAX_BD_NUM)
++
++#define MAX_HW_SGMTS        (MAX_BD_NUM)
++#define MAX_PHY_SGMTS       (MAX_BD_NUM)
++#define MAX_SGMT_SZ         (MAX_DMA_CNT)
++#define MAX_REQ_SZ          (MAX_SGMT_SZ * 8)  
++
++#ifdef MT6575_SD_DEBUG
++static struct msdc_regs *msdc_reg[HOST_MAX_NUM];
++#endif 
++
++//=================================
++#define PERI_MSDC0_PDN      (15)
++//#define PERI_MSDC1_PDN    (16)
++//#define PERI_MSDC2_PDN    (17)
++//#define PERI_MSDC3_PDN    (18)
++
++struct msdc_host *msdc_6575_host[] = {NULL,NULL,NULL,NULL};
++
++struct msdc_hw msdc0_hw = {
++	.clk_src        = 0,
++	.cmd_edge       = MSDC_SMPL_FALLING,
++	.data_edge      = MSDC_SMPL_FALLING,
++	.clk_drv        = 4,
++	.cmd_drv        = 4,
++	.dat_drv        = 4,
++	.data_pins      = 4,
++	.data_offset    = 0,
++	.flags          = MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED,
++};
++
++static struct resource mtk_sd_resources[] = {
++	[0] = {
++		.start  = 0xb0130000,
++		.end    = 0xb0133fff,
++		.flags  = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start  = IRQ_SDC,	/*FIXME*/
++		.end    = IRQ_SDC,	/*FIXME*/
++		.flags  = IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device mtk_sd_device = {
++	.name           = "mtk-sd",
++	.id             = 0,
++	.num_resources  = ARRAY_SIZE(mtk_sd_resources),
++	.resource       = mtk_sd_resources,
++};
++/* end of +++ */
++
++static int msdc_rsp[] = {
++    0,  /* RESP_NONE */
++    1,  /* RESP_R1 */
++    2,  /* RESP_R2 */
++    3,  /* RESP_R3 */
++    4,  /* RESP_R4 */
++    1,  /* RESP_R5 */
++    1,  /* RESP_R6 */
++    1,  /* RESP_R7 */
++    7,  /* RESP_R1b */
++};
++
++/* For Inhanced DMA */
++#define msdc_init_gpd_ex(gpd,extlen,cmd,arg,blknum) \
++    do { \
++        ((gpd_t*)gpd)->extlen = extlen; \
++        ((gpd_t*)gpd)->cmd    = cmd; \
++        ((gpd_t*)gpd)->arg    = arg; \
++        ((gpd_t*)gpd)->blknum = blknum; \
++    }while(0)
++    
++#define msdc_init_bd(bd, blkpad, dwpad, dptr, dlen) \
++    do { \
++        BUG_ON(dlen > 0xFFFFUL); \
++        ((bd_t*)bd)->blkpad = blkpad; \
++        ((bd_t*)bd)->dwpad  = dwpad; \
++        ((bd_t*)bd)->ptr    = (void*)dptr; \
++        ((bd_t*)bd)->buflen = dlen; \
++    }while(0)
++
++#define msdc_txfifocnt()   ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >> 16)
++#define msdc_rxfifocnt()   ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_RXCNT) >> 0)
++#define msdc_fifo_write32(v)   sdr_write32(MSDC_TXDATA, (v))
++#define msdc_fifo_write8(v)    sdr_write8(MSDC_TXDATA, (v))
++#define msdc_fifo_read32()   sdr_read32(MSDC_RXDATA)
++#define msdc_fifo_read8()    sdr_read8(MSDC_RXDATA)	
++
++
++#define msdc_dma_on()        sdr_clr_bits(MSDC_CFG, MSDC_CFG_PIO)
++#define msdc_dma_off()       sdr_set_bits(MSDC_CFG, MSDC_CFG_PIO)
++
++#define msdc_retry(expr,retry,cnt) \
++    do { \
++        int backup = cnt; \
++        while (retry) { \
++            if (!(expr)) break; \
++            if (cnt-- == 0) { \
++                retry--; mdelay(1); cnt = backup; \
++            } \
++        } \
++        WARN_ON(retry == 0); \
++    } while(0)
++
++#if 0 /* +/- chhung */
++#define msdc_reset() \
++    do { \
++        int retry = 3, cnt = 1000; \
++        sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
++        dsb(); \
++        msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
++    } while(0)
++#else
++#define msdc_reset() \
++    do { \
++        int retry = 3, cnt = 1000; \
++        sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
++        msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
++    } while(0)
++#endif /* end of +/- */
++
++#define msdc_clr_int() \
++    do { \
++        volatile u32 val = sdr_read32(MSDC_INT); \
++        sdr_write32(MSDC_INT, val); \
++    } while(0)
++
++#define msdc_clr_fifo() \
++    do { \
++        int retry = 3, cnt = 1000; \
++        sdr_set_bits(MSDC_FIFOCS, MSDC_FIFOCS_CLR); \
++        msdc_retry(sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_CLR, retry, cnt); \
++    } while(0)
++
++#define msdc_irq_save(val) \
++    do { \
++        val = sdr_read32(MSDC_INTEN); \
++        sdr_clr_bits(MSDC_INTEN, val); \
++    } while(0)
++	
++#define msdc_irq_restore(val) \
++    do { \
++        sdr_set_bits(MSDC_INTEN, val); \
++    } while(0)
++
++/* clock source for host: global */
++static u32 hclks[] = {48000000}; /* +/- by chhung */
++
++//============================================
++// the power for msdc host controller: global
++//    always keep the VMC on. 
++//============================================
++#define msdc_vcore_on(host) \
++    do { \
++        printk("[+]VMC ref. count<%d>\n", ++host->pwr_ref); \
++        (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD"); \
++    } while (0)
++#define msdc_vcore_off(host) \
++    do { \
++        printk("[-]VMC ref. count<%d>\n", --host->pwr_ref); \
++        (void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD"); \
++    } while (0)
++
++//====================================
++// the vdd output for card: global 
++//   always keep the VMCH on. 
++//==================================== 
++#define msdc_vdd_on(host) \
++    do { \
++        (void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD"); \
++    } while (0)   
++#define msdc_vdd_off(host) \
++    do { \
++        (void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \
++    } while (0)      
++
++#define sdc_is_busy()          (sdr_read32(SDC_STS) & SDC_STS_SDCBUSY)
++#define sdc_is_cmd_busy()      (sdr_read32(SDC_STS) & SDC_STS_CMDBUSY)
++
++#define sdc_send_cmd(cmd,arg) \
++    do { \
++        sdr_write32(SDC_ARG, (arg)); \
++        sdr_write32(SDC_CMD, (cmd)); \
++    } while(0)
++
++// can modify to read h/w register.
++//#define is_card_present(h)   ((sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1);
++#define is_card_present(h)     (((struct msdc_host*)(h))->card_inserted)
++
++/* +++ chhung */
++#ifndef __ASSEMBLY__
++#define PHYSADDR(a)             (((unsigned long)(a)) & 0x1fffffff)
++#else
++#define PHYSADDR(a)             ((a) & 0x1fffffff)
++#endif
++/* end of +++ */
++static unsigned int msdc_do_command(struct msdc_host   *host, 
++                                      struct mmc_command *cmd,
++                                      int                 tune,
++                                      unsigned long       timeout);  
++                                     
++static int msdc_tune_cmdrsp(struct msdc_host*host,struct mmc_command *cmd);
++
++#ifdef MT6575_SD_DEBUG
++static void msdc_dump_card_status(struct msdc_host *host, u32 status)
++{
++    static char *state[] = {
++        "Idle",			/* 0 */
++        "Ready",		/* 1 */
++        "Ident",		/* 2 */
++        "Stby",			/* 3 */
++        "Tran",			/* 4 */
++        "Data",			/* 5 */
++        "Rcv",			/* 6 */
++        "Prg",			/* 7 */
++        "Dis",			/* 8 */
++        "Reserved",		/* 9 */
++        "Reserved",		/* 10 */
++        "Reserved",		/* 11 */
++        "Reserved",		/* 12 */
++        "Reserved",		/* 13 */
++        "Reserved",		/* 14 */
++        "I/O mode",		/* 15 */
++    };
++    if (status & R1_OUT_OF_RANGE)
++        printk("[CARD_STATUS] Out of Range\n");
++    if (status & R1_ADDRESS_ERROR)
++        printk("[CARD_STATUS] Address Error\n");
++    if (status & R1_BLOCK_LEN_ERROR)
++        printk("[CARD_STATUS] Block Len Error\n");
++    if (status & R1_ERASE_SEQ_ERROR)
++        printk("[CARD_STATUS] Erase Seq Error\n");
++    if (status & R1_ERASE_PARAM)
++        printk("[CARD_STATUS] Erase Param\n");
++    if (status & R1_WP_VIOLATION)
++        printk("[CARD_STATUS] WP Violation\n");
++    if (status & R1_CARD_IS_LOCKED)
++        printk("[CARD_STATUS] Card is Locked\n");
++    if (status & R1_LOCK_UNLOCK_FAILED)
++        printk("[CARD_STATUS] Lock/Unlock Failed\n");
++    if (status & R1_COM_CRC_ERROR)
++        printk("[CARD_STATUS] Command CRC Error\n");
++    if (status & R1_ILLEGAL_COMMAND)
++        printk("[CARD_STATUS] Illegal Command\n");
++    if (status & R1_CARD_ECC_FAILED)
++        printk("[CARD_STATUS] Card ECC Failed\n");
++    if (status & R1_CC_ERROR)
++        printk("[CARD_STATUS] CC Error\n");
++    if (status & R1_ERROR)
++        printk("[CARD_STATUS] Error\n");
++    if (status & R1_UNDERRUN)
++        printk("[CARD_STATUS] Underrun\n");
++    if (status & R1_OVERRUN)
++        printk("[CARD_STATUS] Overrun\n");
++    if (status & R1_CID_CSD_OVERWRITE)
++        printk("[CARD_STATUS] CID/CSD Overwrite\n");
++    if (status & R1_WP_ERASE_SKIP)
++        printk("[CARD_STATUS] WP Eraser Skip\n");
++    if (status & R1_CARD_ECC_DISABLED)
++        printk("[CARD_STATUS] Card ECC Disabled\n");
++    if (status & R1_ERASE_RESET)
++        printk("[CARD_STATUS] Erase Reset\n");
++    if (status & R1_READY_FOR_DATA)
++        printk("[CARD_STATUS] Ready for Data\n");
++    if (status & R1_SWITCH_ERROR)
++        printk("[CARD_STATUS] Switch error\n");
++    if (status & R1_APP_CMD)
++        printk("[CARD_STATUS] App Command\n");
++    
++    printk("[CARD_STATUS] '%s' State\n", state[R1_CURRENT_STATE(status)]);
++}
++
++static void msdc_dump_ocr_reg(struct msdc_host *host, u32 resp)
++{
++    if (resp & (1 << 7))
++        printk("[OCR] Low Voltage Range\n");
++    if (resp & (1 << 15))
++        printk("[OCR] 2.7-2.8 volt\n");
++    if (resp & (1 << 16))
++        printk("[OCR] 2.8-2.9 volt\n");
++    if (resp & (1 << 17))
++        printk("[OCR] 2.9-3.0 volt\n");
++    if (resp & (1 << 18))
++        printk("[OCR] 3.0-3.1 volt\n");
++    if (resp & (1 << 19))
++        printk("[OCR] 3.1-3.2 volt\n");
++    if (resp & (1 << 20))
++        printk("[OCR] 3.2-3.3 volt\n");
++    if (resp & (1 << 21))
++        printk("[OCR] 3.3-3.4 volt\n");
++    if (resp & (1 << 22))
++        printk("[OCR] 3.4-3.5 volt\n");
++    if (resp & (1 << 23))
++        printk("[OCR] 3.5-3.6 volt\n");
++    if (resp & (1 << 24))
++        printk("[OCR] Switching to 1.8V Accepted (S18A)\n");
++    if (resp & (1 << 30))
++        printk("[OCR] Card Capacity Status (CCS)\n");
++    if (resp & (1 << 31))
++        printk("[OCR] Card Power Up Status (Idle)\n");
++    else
++        printk("[OCR] Card Power Up Status (Busy)\n");
++}
++
++static void msdc_dump_rca_resp(struct msdc_host *host, u32 resp)
++{
++    u32 status = (((resp >> 15) & 0x1) << 23) |
++                 (((resp >> 14) & 0x1) << 22) |
++                 (((resp >> 13) & 0x1) << 19) |
++                   (resp & 0x1fff);
++
++    printk("[RCA] 0x%.4x\n", resp >> 16);
++    
++    msdc_dump_card_status(host, status);
++}
++
++static void msdc_dump_io_resp(struct msdc_host *host, u32 resp)
++{
++    u32 flags = (resp >> 8) & 0xFF;
++    char *state[] = {"DIS", "CMD", "TRN", "RFU"};
++
++    if (flags & (1 << 7))
++        printk("[IO] COM_CRC_ERR\n");
++    if (flags & (1 << 6))
++        printk("[IO] Illgal command\n");
++    if (flags & (1 << 3))
++        printk("[IO] Error\n");
++    if (flags & (1 << 2))
++        printk("[IO] RFU\n");
++    if (flags & (1 << 1))
++        printk("[IO] Function number error\n");
++    if (flags & (1 << 0))
++        printk("[IO] Out of range\n");
++
++    printk("[IO] State: %s, Data:0x%x\n", state[(resp >> 12) & 0x3], resp & 0xFF);
++}
++#endif
++
++static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
++{
++	u32 base = host->base;
++	u32 timeout, clk_ns;
++
++	host->timeout_ns = ns;
++	host->timeout_clks = clks;
++
++	clk_ns = 1000000000UL / host->sclk;
++	timeout = ns / clk_ns + clks;
++	timeout = timeout >> 16; /* in 65536 sclk cycle unit */
++	timeout = timeout > 1 ? timeout - 1 : 0;
++	timeout = timeout > 255 ? 255 : timeout;
++
++	sdr_set_field(SDC_CFG, SDC_CFG_DTOC, timeout);
++
++/*	printk("Set read data timeout: %dns %dclks -> %d x 65536 cycles\n",
++		ns, clks, timeout + 1);*/
++}
++
++static void msdc_eirq_sdio(void *data)
++{
++	struct msdc_host *host = (struct msdc_host *)data;
++
++//	printk("SDIO EINT\n");
++
++	mmc_signal_sdio_irq(host->mmc);
++}
++
++static void msdc_eirq_cd(void *data)
++{
++	struct msdc_host *host = (struct msdc_host *)data;
++
++//	printk("CD EINT\n");
++
++	tasklet_hi_schedule(&host->card_tasklet);
++}
++
++static void msdc_tasklet_card(unsigned long arg)
++{
++	struct msdc_host *host = (struct msdc_host *)arg;
++	struct msdc_hw *hw = host->hw;
++	u32 base = host->base;
++	u32 inserted;
++	u32 status = 0;
++
++	spin_lock(&host->lock);
++
++	if (hw->get_cd_status) {
++		inserted = hw->get_cd_status();
++	} else {
++		status = sdr_read32(MSDC_PS);
++		inserted = (status & MSDC_PS_CDSTS) ? 0 : 1;
++	}
++
++	host->card_inserted = inserted;
++
++	if (!host->suspend) {
++		host->mmc->f_max = HOST_MAX_MCLK;
++		mmc_detect_change(host->mmc, msecs_to_jiffies(20));
++	}
++
++//	printk("card found<%s>\n", inserted ? "inserted" : "removed");
++
++	spin_unlock(&host->lock);
++}
++
++static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
++{
++	u32 base = host->base;
++	u32 hclk = host->hclk;
++	u32 mode, flags, div, sclk;
++
++	if (!hz) {
++//		printk("set mclk to 0!!!\n");
++		msdc_reset();
++		return;
++	}
++
++	msdc_irq_save(flags);
++
++	if (ddr) {
++		mode = 0x2;
++		if (hz >= (hclk >> 2)) {
++			div = 1;
++			sclk = hclk >> 2;
++		} else {
++			div  = (hclk + ((hz << 2) - 1)) / (hz << 2);
++			sclk = (hclk >> 2) / div;
++		}
++	} else if (hz >= hclk) {
++		mode = 0x1;
++		div = 0;
++		sclk = hclk;
++	} else {
++		mode = 0x0;
++		if (hz >= (hclk >> 1)) {
++			div = 0;
++			sclk = hclk >> 1;
++		} else {
++			div = (hclk + ((hz << 2) - 1)) / (hz << 2);
++			sclk = (hclk >> 2) / div;
++		}
++	}
++
++	sdr_set_field(MSDC_CFG, MSDC_CFG_CKMOD, mode);
++	sdr_set_field(MSDC_CFG, MSDC_CFG_CKDIV, div);
++
++	while (!(sdr_read32(MSDC_CFG) & MSDC_CFG_CKSTB));
++
++	host->sclk = sclk;
++	host->mclk = hz;
++	msdc_set_timeout(host, host->timeout_ns, host->timeout_clks);
++
++/*	printk("!!! Set<%dKHz> Source<%dKHz> -> sclk<%dKHz>\n",
++		hz / 1000, hclk / 1000, sclk / 1000);
++*/
++	msdc_irq_restore(flags);
++}
++
++static void msdc_abort_data(struct msdc_host *host)
++{
++	u32 base = host->base;
++	struct mmc_command *stop = host->mrq->stop;
++
++//	printk("Need to Abort. dma<%d>\n", host->dma_xfer);
++
++	msdc_reset();
++	msdc_clr_fifo();
++	msdc_clr_int();
++
++	if (stop) {
++//		printk("stop when abort CMD<%d>\n", stop->opcode);
++		msdc_do_command(host, stop, 0, CMD_TIMEOUT);
++	}
++}
++
++static unsigned int msdc_command_start(struct msdc_host *host,
++		struct mmc_command *cmd, int tune, unsigned long timeout)
++{
++	u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
++		MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
++		MSDC_INT_ACMD19_DONE;
++	u32 base = host->base;
++	u32 opcode = cmd->opcode;
++	u32 rawcmd;
++	u32 resp;
++	unsigned long tmo;
++
++	if (opcode == MMC_SEND_OP_COND || opcode == SD_APP_OP_COND)
++		resp = RESP_R3;
++	else if (opcode == MMC_SET_RELATIVE_ADDR || opcode == SD_SEND_RELATIVE_ADDR)
++		resp = (mmc_cmd_type(cmd) == MMC_CMD_BCR) ? RESP_R6 : RESP_R1;
++	else if (opcode == MMC_FAST_IO)
++		resp = RESP_R4;
++	else if (opcode == MMC_GO_IRQ_STATE)
++		resp = RESP_R5;
++	else if (opcode == MMC_SELECT_CARD)
++		resp = (cmd->arg != 0) ? RESP_R1B : RESP_NONE;
++	else if (opcode == SD_IO_RW_DIRECT || opcode == SD_IO_RW_EXTENDED)
++		resp = RESP_R1;
++	else if (opcode == SD_SEND_IF_COND && (mmc_cmd_type(cmd) == MMC_CMD_BCR))
++		resp = RESP_R1;
++	else {
++		switch (mmc_resp_type(cmd)) {
++		case MMC_RSP_R1:
++			resp = RESP_R1;
++			break;
++		case MMC_RSP_R1B:
++			resp = RESP_R1B;
++			break;
++		case MMC_RSP_R2:
++			resp = RESP_R2;
++			break;
++		case MMC_RSP_R3:
++			resp = RESP_R3;
++			break;
++		case MMC_RSP_NONE:
++		default:
++			resp = RESP_NONE;
++			break;
++		}
++	}
++
++	cmd->error = 0;
++	rawcmd = opcode | msdc_rsp[resp] << 7 | host->blksz << 16;
++
++	if (opcode == MMC_READ_MULTIPLE_BLOCK) {
++		rawcmd |= (2 << 11);
++	} else if (opcode == MMC_READ_SINGLE_BLOCK) {
++		rawcmd |= (1 << 11);
++	} else if (opcode == MMC_WRITE_MULTIPLE_BLOCK) {
++		rawcmd |= ((2 << 11) | (1 << 13));
++	} else if (opcode == MMC_WRITE_BLOCK) {
++		rawcmd |= ((1 << 11) | (1 << 13));
++	} else if (opcode == SD_IO_RW_EXTENDED) {
++		if (cmd->data->flags & MMC_DATA_WRITE)
++			rawcmd |= (1 << 13);
++		if (cmd->data->blocks > 1)
++			rawcmd |= (2 << 11);
++		else
++			rawcmd |= (1 << 11);
++	} else if (opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int)-1) {
++		rawcmd |= (1 << 14);
++	} else if ((opcode == SD_APP_SEND_SCR) ||
++			(opcode == SD_APP_SEND_NUM_WR_BLKS) ||
++			(opcode == SD_SWITCH && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
++			(opcode == SD_APP_SD_STATUS && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
++			(opcode == MMC_SEND_EXT_CSD && (mmc_cmd_type(cmd) == MMC_CMD_ADTC))) {
++		rawcmd |= (1 << 11);
++	} else if (opcode == MMC_STOP_TRANSMISSION) {
++		rawcmd |= (1 << 14);
++		rawcmd &= ~(0x0FFF << 16);
++	}
++
++//	printk("CMD<%d><0x%.8x> Arg<0x%.8x>\n", opcode , rawcmd, cmd->arg);
++
++	tmo = jiffies + timeout;
++
++	if (opcode == MMC_SEND_STATUS) {
++		for (;;) {
++			if (!sdc_is_cmd_busy())
++				break;
++
++			if (time_after(jiffies, tmo)) {
++				//printk("XXX cmd_busy timeout: before CMD<%d>\n", opcode);
++				cmd->error = (unsigned int)-ETIMEDOUT;
++				msdc_reset();
++				goto end;
++			}
++		}
++	} else {
++		for (;;) {
++			if (!sdc_is_busy())
++				break;
++			if (time_after(jiffies, tmo)) {
++				//printk("XXX sdc_busy timeout: before CMD<%d>\n", opcode);
++				cmd->error = (unsigned int)-ETIMEDOUT;
++				msdc_reset();
++				goto end;
++			}
++		}
++	}
++
++	//BUG_ON(in_interrupt());
++	host->cmd = cmd;
++	host->cmd_rsp = resp;
++	init_completion(&host->cmd_done);
++	sdr_set_bits(MSDC_INTEN, wints);
++	sdc_send_cmd(rawcmd, cmd->arg);
++
++end:
++	return cmd->error;
++}
++
++static unsigned int msdc_command_resp(struct msdc_host *host, struct mmc_command *cmd,
++				int tune, unsigned long timeout)
++{
++	u32 base = host->base;
++	//u32 opcode = cmd->opcode;
++	u32 resp;
++	u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
++		MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
++		MSDC_INT_ACMD19_DONE;
++
++	resp = host->cmd_rsp;
++
++	BUG_ON(in_interrupt());
++	spin_unlock(&host->lock);
++	if (!wait_for_completion_timeout(&host->cmd_done, 10*timeout)) {
++		//printk("XXX CMD<%d> wait_for_completion timeout ARG<0x%.8x>\n", opcode, cmd->arg);
++		cmd->error = (unsigned int)-ETIMEDOUT;
++		msdc_reset();
++	}
++	spin_lock(&host->lock);
++
++	sdr_clr_bits(MSDC_INTEN, wints);
++	host->cmd = NULL;
++
++	if (!tune)
++		return cmd->error;
++
++	/* memory card CRC */
++	if (host->hw->flags & MSDC_REMOVABLE && cmd->error == (unsigned int)(-EIO) ) {
++		if (sdr_read32(SDC_CMD) & 0x1800) {
++			msdc_abort_data(host);
++		} else {
++			msdc_reset();
++			msdc_clr_fifo();
++			msdc_clr_int();
++		}
++		cmd->error = msdc_tune_cmdrsp(host,cmd);
++	}
++
++	return cmd->error;
++}
++
++static unsigned int msdc_do_command(struct msdc_host *host, struct mmc_command *cmd,
++			int tune, unsigned long timeout)
++{
++	if (!msdc_command_start(host, cmd, tune, timeout))
++		msdc_command_resp(host, cmd, tune, timeout);
++
++	//printk("        return<%d> resp<0x%.8x>\n", cmd->error, cmd->resp[0]);
++	return cmd->error;
++}
++
++static int msdc_pio_abort(struct msdc_host *host, struct mmc_data *data, unsigned long tmo)
++{
++	u32  base = host->base;
++	int  ret = 0;
++
++	if (atomic_read(&host->abort))
++		ret = 1;
++
++	if (time_after(jiffies, tmo)) {
++		data->error = (unsigned int)-ETIMEDOUT;
++		//printk("XXX PIO Data Timeout: CMD<%d>\n", host->mrq->cmd->opcode);
++		ret = 1;
++	}
++
++	if (ret) {
++		msdc_reset();
++		msdc_clr_fifo();
++		msdc_clr_int();
++		//printk("msdc pio find abort\n");
++	}
++
++	return ret;
++}
++
++static int msdc_pio_read(struct msdc_host *host, struct mmc_data *data)
++{
++	struct scatterlist *sg = data->sg;
++	u32  base = host->base;
++	u32  num = data->sg_len;
++	u32 *ptr;
++	u8  *u8ptr;
++	u32  left;
++	u32  count, size = 0;
++	u32  wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++	unsigned long tmo = jiffies + DAT_TIMEOUT;
++
++	sdr_set_bits(MSDC_INTEN, wints);
++	while (num) {
++		left = sg_dma_len(sg);
++		ptr = sg_virt(sg);
++		while (left) {
++			if ((left >=  MSDC_FIFO_THD) && (msdc_rxfifocnt() >= MSDC_FIFO_THD)) {
++				count = MSDC_FIFO_THD >> 2;
++				do {
++					*ptr++ = msdc_fifo_read32();
++				} while (--count);
++				left -= MSDC_FIFO_THD;
++			} else if ((left < MSDC_FIFO_THD) && msdc_rxfifocnt() >= left) {
++				while (left > 3) {
++					*ptr++ = msdc_fifo_read32();
++					left -= 4;
++				}
++
++				u8ptr = (u8 *)ptr;
++				while(left) {
++					* u8ptr++ = msdc_fifo_read8();
++					left--;
++				}
++			}
++
++			if (msdc_pio_abort(host, data, tmo))
++				goto end;
++		}
++		size += sg_dma_len(sg);
++		sg = sg_next(sg); num--;
++	}
++end:
++	data->bytes_xfered += size;
++	//printk("        PIO Read<%d>bytes\n", size);
++
++	sdr_clr_bits(MSDC_INTEN, wints);
++	if(data->error)
++		printk("read pio data->error<%d> left<%d> size<%d>\n", data->error, left, size);
++
++	return data->error;
++}
++
++static int msdc_pio_write(struct msdc_host* host, struct mmc_data *data)
++{
++	u32  base = host->base;
++	struct scatterlist *sg = data->sg;
++	u32  num = data->sg_len;
++	u32 *ptr;
++	u8  *u8ptr;
++	u32  left;
++	u32  count, size = 0;
++	u32  wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++	unsigned long tmo = jiffies + DAT_TIMEOUT;
++
++	sdr_set_bits(MSDC_INTEN, wints);
++	while (num) {
++		left = sg_dma_len(sg);
++		ptr = sg_virt(sg);
++
++		while (left) {
++			if (left >= MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
++				count = MSDC_FIFO_SZ >> 2;
++				do {
++					msdc_fifo_write32(*ptr); ptr++;
++				} while (--count);
++				left -= MSDC_FIFO_SZ;
++			} else if (left < MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
++				while (left > 3) {
++					msdc_fifo_write32(*ptr); ptr++;
++					left -= 4;
++				}
++
++				u8ptr = (u8*)ptr;
++				while( left) {
++					msdc_fifo_write8(*u8ptr);
++					u8ptr++;
++					left--;
++				}
++			}
++
++			if (msdc_pio_abort(host, data, tmo))
++				goto end;
++		}
++		size += sg_dma_len(sg);
++		sg = sg_next(sg); num--;
++	}
++end:
++	data->bytes_xfered += size;
++	//printk("        PIO Write<%d>bytes\n", size);
++	if(data->error)
++		printk("write pio data->error<%d>\n", data->error);
++
++	sdr_clr_bits(MSDC_INTEN, wints);
++
++	return data->error;
++}
++
++static void msdc_dma_start(struct msdc_host *host)
++{
++	u32 base = host->base;
++	u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++
++	sdr_set_bits(MSDC_INTEN, wints);
++	sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1);
++
++	//printk("DMA start\n");
++}
++
++static void msdc_dma_stop(struct msdc_host *host)
++{
++	u32 base = host->base;
++	u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++
++	//printk("DMA status: 0x%.8x\n",sdr_read32(MSDC_DMA_CFG));
++
++	sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1);
++	while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
++	sdr_clr_bits(MSDC_INTEN, wints); /* Not just xfer_comp */
++
++	//printk("DMA stop\n");
++}
++
++static u8 msdc_dma_calcs(u8 *buf, u32 len)
++{
++	u32 i, sum = 0;
++
++	for (i = 0; i < len; i++)
++		sum += buf[i];
++
++	return 0xFF - (u8)sum;
++}
++
++static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
++{
++	u32 base = host->base;
++	u32 sglen = dma->sglen;
++	u32 j, num, bdlen;
++	u8  blkpad, dwpad, chksum;
++	struct scatterlist *sg = dma->sg;
++	gpd_t *gpd;
++	bd_t *bd;
++
++	switch (dma->mode) {
++	case MSDC_MODE_DMA_BASIC:
++		BUG_ON(dma->xfersz > 65535);
++		BUG_ON(dma->sglen != 1);
++		sdr_write32(MSDC_DMA_SA, PHYSADDR(sg_dma_address(sg)));
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_LASTBUF, 1);
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_XFERSZ, sg_dma_len(sg));
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 0);
++		break;
++
++	case MSDC_MODE_DMA_DESC:
++		blkpad = (dma->flags & DMA_FLAG_PAD_BLOCK) ? 1 : 0;
++		dwpad  = (dma->flags & DMA_FLAG_PAD_DWORD) ? 1 : 0;
++		chksum = (dma->flags & DMA_FLAG_EN_CHKSUM) ? 1 : 0;
++
++		num = (sglen + MAX_BD_PER_GPD - 1) / MAX_BD_PER_GPD;
++		BUG_ON(num !=1 );
++
++		gpd = dma->gpd;
++		bd = dma->bd;
++		bdlen = sglen;
++
++		gpd->hwo = 1;  /* hw will clear it */
++		gpd->bdp = 1;
++		gpd->chksum = 0;  /* need to clear first. */
++		gpd->chksum = (chksum ? msdc_dma_calcs((u8 *)gpd, 16) : 0);
++
++		for (j = 0; j < bdlen; j++) {
++			msdc_init_bd(&bd[j], blkpad, dwpad, sg_dma_address(sg), sg_dma_len(sg));
++			if( j == bdlen - 1)
++				bd[j].eol = 1;
++			else
++				bd[j].eol = 0;
++			bd[j].chksum = 0; /* checksume need to clear first */
++			bd[j].chksum = (chksum ? msdc_dma_calcs((u8 *)(&bd[j]), 16) : 0);
++			sg++;
++		}
++
++		dma->used_gpd += 2;
++		dma->used_bd += bdlen;
++
++		sdr_set_field(MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, chksum);
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
++		sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 1);
++		sdr_write32(MSDC_DMA_SA, PHYSADDR((u32)dma->gpd_addr));
++		break;
++	}
++
++//	printk("DMA_CTRL = 0x%x\n", sdr_read32(MSDC_DMA_CTRL));
++//	printk("DMA_CFG  = 0x%x\n", sdr_read32(MSDC_DMA_CFG));
++//	printk("DMA_SA   = 0x%x\n", sdr_read32(MSDC_DMA_SA));
++
++	return 0;
++}
++
++static void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma,
++			struct scatterlist *sg, unsigned int sglen)
++{
++	BUG_ON(sglen > MAX_BD_NUM);
++
++	dma->sg = sg;
++	dma->flags = DMA_FLAG_EN_CHKSUM;
++	dma->sglen = sglen;
++	dma->xfersz = host->xfer_size;
++	dma->burstsz = MSDC_BRUST_64B;
++
++	if (sglen == 1 && sg_dma_len(sg) <= MAX_DMA_CNT)
++		dma->mode = MSDC_MODE_DMA_BASIC;
++	else
++		dma->mode = MSDC_MODE_DMA_DESC;
++
++//	printk("DMA mode<%d> sglen<%d> xfersz<%d>\n", dma->mode, dma->sglen, dma->xfersz);
++
++	msdc_dma_config(host, dma);
++}
++
++static void msdc_set_blknum(struct msdc_host *host, u32 blknum)
++{
++	u32 base = host->base;
++
++	sdr_write32(SDC_BLK_NUM, blknum);
++}
++
++static int msdc_do_request(struct mmc_host*mmc, struct mmc_request*mrq)
++{
++	struct msdc_host *host = mmc_priv(mmc);
++	struct mmc_command *cmd;
++	struct mmc_data *data;
++	u32 base = host->base;
++	unsigned int left=0;
++	int dma = 0, read = 1, dir = DMA_FROM_DEVICE, send_type=0;
++
++#define SND_DAT 0
++#define SND_CMD 1
++
++	BUG_ON(mmc == NULL);
++	BUG_ON(mrq == NULL);
++
++	host->error = 0;
++	atomic_set(&host->abort, 0);
++
++	cmd  = mrq->cmd;
++	data = mrq->cmd->data;
++
++	if (!data) {
++		send_type = SND_CMD;
++		if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
++			goto done;
++	} else {
++		BUG_ON(data->blksz > HOST_MAX_BLKSZ);
++		send_type=SND_DAT;
++
++		data->error = 0;
++		read = data->flags & MMC_DATA_READ ? 1 : 0;
++		host->data = data;
++		host->xfer_size = data->blocks * data->blksz;
++		host->blksz = data->blksz;
++
++		host->dma_xfer = dma = ((host->xfer_size >= 512) ? 1 : 0);
++
++		if (read)
++			if ((host->timeout_ns != data->timeout_ns) ||
++					(host->timeout_clks != data->timeout_clks))
++				msdc_set_timeout(host, data->timeout_ns, data->timeout_clks);
++
++			msdc_set_blknum(host, data->blocks);
++
++			if (dma) {
++				msdc_dma_on();
++				init_completion(&host->xfer_done);
++
++				if (msdc_command_start(host, cmd, 1, CMD_TIMEOUT) != 0)
++					goto done;
++
++				dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
++				dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
++				msdc_dma_setup(host, &host->dma, data->sg, data->sg_len);
++
++				if (msdc_command_resp(host, cmd, 1, CMD_TIMEOUT) != 0)
++					goto done;
++
++				msdc_dma_start(host);
++
++				spin_unlock(&host->lock);
++				if (!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)) {
++					/*printk("XXX CMD<%d> wait xfer_done<%d> timeout!!\n", cmd->opcode, data->blocks * data->blksz);
++					printk("    DMA_SA   = 0x%x\n", sdr_read32(MSDC_DMA_SA));
++					printk("    DMA_CA   = 0x%x\n", sdr_read32(MSDC_DMA_CA));
++					printk("    DMA_CTRL = 0x%x\n", sdr_read32(MSDC_DMA_CTRL));
++					printk("    DMA_CFG  = 0x%x\n", sdr_read32(MSDC_DMA_CFG));*/
++					data->error = (unsigned int)-ETIMEDOUT;
++
++					msdc_reset();
++					msdc_clr_fifo();
++					msdc_clr_int();
++				}
++				spin_lock(&host->lock);
++				msdc_dma_stop(host);
++			} else {
++				if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
++					goto done;
++
++				if (read) {
++					if (msdc_pio_read(host, data))
++						goto done;
++				} else {
++					if (msdc_pio_write(host, data))
++						goto done;
++				}
++
++			if (!read) {
++				while (1) {
++					left = msdc_txfifocnt();
++					if (left == 0) {
++						break;
++					}
++					if (msdc_pio_abort(host, data, jiffies + DAT_TIMEOUT)) {
++						break;
++					/* Fix me: what about if data error, when stop ? how to? */
++					}
++				}
++			} else {
++				/* Fix me: read case: need to check CRC error */	
++			}
++
++			/* For write case: SDCBUSY and Xfer_Comp will assert when DAT0 not busy. 
++			   For read case : SDCBUSY and Xfer_Comp will assert when last byte read out from FIFO.
++			*/
++
++			/* try not to wait xfer_comp interrupt. 
++			the next command will check SDC_BUSY. 
++			SDC_BUSY means xfer_comp assert 
++			*/ 
++
++		} // PIO mode 
++
++		/* Last: stop transfer */
++		if (data->stop){ 
++			if (msdc_do_command(host, data->stop, 0, CMD_TIMEOUT) != 0) {
++				goto done; 
++			}
++		} 
++	}
++
++done:
++	if (data != NULL) {
++		host->data = NULL;
++		host->dma_xfer = 0;    
++		if (dma != 0) {
++			msdc_dma_off();     
++			host->dma.used_bd  = 0;
++			host->dma.used_gpd = 0;
++			dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
++		}
++		host->blksz = 0;  
++
++	//	printk("CMD<%d> data<%s %s> blksz<%d> block<%d> error<%d>",cmd->opcode, (dma? "dma":"pio\n"), 
++	//		(read ? "read ":"write") ,data->blksz, data->blocks, data->error);                
++	}
++
++	if (mrq->cmd->error) host->error = 0x001;
++	if (mrq->data && mrq->data->error) host->error |= 0x010;     
++	if (mrq->stop && mrq->stop->error) host->error |= 0x100; 
++
++	//if (host->error) printk("host->error<%d>\n", host->error);     
++
++	return host->error;
++}
++
++static int msdc_app_cmd(struct mmc_host *mmc, struct msdc_host *host)
++{
++    struct mmc_command cmd;    
++    struct mmc_request mrq;
++    u32 err; 
++
++    memset(&cmd, 0, sizeof(struct mmc_command));    
++    cmd.opcode = MMC_APP_CMD;    
++#if 0   /* bug: we meet mmc->card is null when ACMD6 */   
++    cmd.arg = mmc->card->rca << 16;
++#else 
++    cmd.arg = host->app_cmd_arg;     
++#endif    
++    cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
++
++    memset(&mrq, 0, sizeof(struct mmc_request));
++    mrq.cmd = &cmd; cmd.mrq = &mrq;
++    cmd.data = NULL;        
++
++    err = msdc_do_command(host, &cmd, 0, CMD_TIMEOUT);     
++    return err;      	
++}
++
++static int msdc_tune_cmdrsp(struct msdc_host*host, struct mmc_command *cmd)
++{
++    int result = -1;
++    u32 base = host->base;
++    u32 rsmpl, cur_rsmpl, orig_rsmpl;
++    u32 rrdly, cur_rrdly = 0, orig_rrdly;
++    u32 skip = 1;
++    
++    /* ==== don't support 3.0 now ====
++           1: R_SMPL[1] 
++           2: PAD_CMD_RESP_RXDLY[26:22] 
++	    ==========================*/
++
++    // save the previous tune result 
++    sdr_get_field(MSDC_IOCON,    MSDC_IOCON_RSPL,        orig_rsmpl);
++    sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, orig_rrdly);
++
++    rrdly = 0; 
++    do {
++        for (rsmpl = 0; rsmpl < 2; rsmpl++) {
++            /* Lv1: R_SMPL[1] */    	
++            cur_rsmpl = (orig_rsmpl + rsmpl) % 2;         
++            if (skip == 1) {
++                skip = 0; 	
++                continue;	
++            }
++            sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, cur_rsmpl); 
++
++            if (host->app_cmd) {
++                result = msdc_app_cmd(host->mmc, host);	
++                if (result) {
++                    //printk("TUNE_CMD app_cmd<%d> failed: RESP_RXDLY<%d>,R_SMPL<%d>\n", 
++                      //   host->mrq->cmd->opcode, cur_rrdly, cur_rsmpl);
++                    continue;
++                } 
++            }          
++            result = msdc_do_command(host, cmd, 0, CMD_TIMEOUT); // not tune.             
++            //printk("TUNE_CMD<%d> %s PAD_CMD_RESP_RXDLY[26:22]<%d> R_SMPL[1]<%d>\n", cmd->opcode,
++//                       (result == 0) ? "PASS" : "FAIL", cur_rrdly, cur_rsmpl);
++                       	
++            if (result == 0) {
++                return 0; 	
++            }                        	
++            if (result != (unsigned int)(-EIO)) { 
++              //  printk("TUNE_CMD<%d> Error<%d> not -EIO\n", cmd->opcode, result);	
++                return result;	 
++            }
++
++            /* should be EIO */
++            if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */ 
++                msdc_abort_data(host);
++            }
++        }
++		
++        /* Lv2: PAD_CMD_RESP_RXDLY[26:22] */              	
++        cur_rrdly = (orig_rrdly + rrdly + 1) % 32;
++        sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, cur_rrdly);		
++    }while (++rrdly < 32);
++	
++    return result;
++}
++
++/* Support SD2.0 Only */
++static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++    struct msdc_host *host = mmc_priv(mmc);
++    u32 base = host->base;
++    u32 ddr=0;
++    u32 dcrc = 0;
++    u32 rxdly, cur_rxdly0, cur_rxdly1;
++    u32 dsmpl, cur_dsmpl,  orig_dsmpl;
++    u32 cur_dat0,  cur_dat1,  cur_dat2,  cur_dat3;
++    u32 cur_dat4,  cur_dat5,  cur_dat6,  cur_dat7;
++    u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
++    u32 orig_dat4, orig_dat5, orig_dat6, orig_dat7;
++    int result = -1;
++    u32 skip = 1;
++
++    sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl);
++	
++    /* Tune Method 2. */
++    sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
++
++    rxdly = 0; 
++    do {
++        for (dsmpl = 0; dsmpl < 2; dsmpl++) {
++            cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
++            if (skip == 1) {
++                skip = 0; 	
++                continue;	
++            }             
++            sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
++
++            if (host->app_cmd) {
++                result = msdc_app_cmd(host->mmc, host);	
++                if (result) {
++                    //printk("TUNE_BREAD app_cmd<%d> failed\n", host->mrq->cmd->opcode);	
++                    continue;
++                } 
++            } 
++            result = msdc_do_request(mmc,mrq);
++            
++            sdr_get_field(SDC_DCRC_STS, SDC_DCRC_STS_POS|SDC_DCRC_STS_NEG, dcrc); /* RO */
++            if (!ddr) dcrc &= ~SDC_DCRC_STS_NEG;
++            //printk("TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>\n",
++                       // (result == 0 && dcrc == 0) ? "PASS" : "FAIL", dcrc,
++                       // sdr_read32(MSDC_DAT_RDDLY0), sdr_read32(MSDC_DAT_RDDLY1), cur_dsmpl);
++
++            /* Fix me: result is 0, but dcrc is still exist */
++            if (result == 0 && dcrc == 0) {
++                goto done;
++            } else {
++                /* there is a case: command timeout, and data phase not processed */
++                if (mrq->data->error != 0 && mrq->data->error != (unsigned int)(-EIO)) {
++                    //printk("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n", 
++                         //      result, mrq->cmd->error, mrq->data->error);	
++                    goto done;     	
++                }
++            }
++        }    
++
++        cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
++        cur_rxdly1 = sdr_read32(MSDC_DAT_RDDLY1);
++
++        /* E1 ECO. YD: Reverse */
++        if (sdr_read32(MSDC_ECO_VER) >= 4) {
++            orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
++            orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
++            orig_dat2 = (cur_rxdly0 >>  8) & 0x1F;
++            orig_dat3 = (cur_rxdly0 >>  0) & 0x1F;
++            orig_dat4 = (cur_rxdly1 >> 24) & 0x1F;
++            orig_dat5 = (cur_rxdly1 >> 16) & 0x1F;
++            orig_dat6 = (cur_rxdly1 >>  8) & 0x1F;
++            orig_dat7 = (cur_rxdly1 >>  0) & 0x1F;
++        } else {   
++            orig_dat0 = (cur_rxdly0 >>  0) & 0x1F;
++            orig_dat1 = (cur_rxdly0 >>  8) & 0x1F;
++            orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
++            orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
++            orig_dat4 = (cur_rxdly1 >>  0) & 0x1F;
++            orig_dat5 = (cur_rxdly1 >>  8) & 0x1F;
++            orig_dat6 = (cur_rxdly1 >> 16) & 0x1F;
++            orig_dat7 = (cur_rxdly1 >> 24) & 0x1F;
++        }
++                
++        if (ddr) {
++            cur_dat0 = (dcrc & (1 << 0) || dcrc & (1 << 8))  ? ((orig_dat0 + 1) % 32) : orig_dat0;
++            cur_dat1 = (dcrc & (1 << 1) || dcrc & (1 << 9))  ? ((orig_dat1 + 1) % 32) : orig_dat1;
++            cur_dat2 = (dcrc & (1 << 2) || dcrc & (1 << 10)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
++            cur_dat3 = (dcrc & (1 << 3) || dcrc & (1 << 11)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
++        } else {
++            cur_dat0 = (dcrc & (1 << 0)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
++            cur_dat1 = (dcrc & (1 << 1)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
++            cur_dat2 = (dcrc & (1 << 2)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
++            cur_dat3 = (dcrc & (1 << 3)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
++        }
++        cur_dat4 = (dcrc & (1 << 4)) ? ((orig_dat4 + 1) % 32) : orig_dat4;
++        cur_dat5 = (dcrc & (1 << 5)) ? ((orig_dat5 + 1) % 32) : orig_dat5;
++        cur_dat6 = (dcrc & (1 << 6)) ? ((orig_dat6 + 1) % 32) : orig_dat6;
++        cur_dat7 = (dcrc & (1 << 7)) ? ((orig_dat7 + 1) % 32) : orig_dat7;
++
++        cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
++        cur_rxdly1 = (cur_dat4 << 24) | (cur_dat5 << 16) | (cur_dat6 << 8) | (cur_dat7 << 0);
++
++        sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
++        sdr_write32(MSDC_DAT_RDDLY1, cur_rxdly1);
++
++    } while (++rxdly < 32);   
++          
++done:
++    return result;
++}
++
++static int msdc_tune_bwrite(struct mmc_host *mmc,struct mmc_request *mrq)
++{
++	  struct msdc_host *host = mmc_priv(mmc);
++    u32 base = host->base;
++
++    u32 wrrdly, cur_wrrdly = 0, orig_wrrdly;
++    u32 dsmpl,  cur_dsmpl,  orig_dsmpl;
++    u32 rxdly,  cur_rxdly0;
++    u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
++    u32 cur_dat0,  cur_dat1,  cur_dat2,  cur_dat3;
++    int result = -1;
++    u32 skip = 1;
++
++    // MSDC_IOCON_DDR50CKD need to check. [Fix me] 
++    
++    sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, orig_wrrdly);
++    sdr_get_field(MSDC_IOCON,    MSDC_IOCON_DSPL,        orig_dsmpl );
++
++    /* Tune Method 2. just DAT0 */  
++    sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
++    cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
++    
++    /* E1 ECO. YD: Reverse */
++    if (sdr_read32(MSDC_ECO_VER) >= 4) {
++        orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
++        orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
++        orig_dat2 = (cur_rxdly0 >>  8) & 0x1F;
++        orig_dat3 = (cur_rxdly0 >>  0) & 0x1F;
++    } else {
++        orig_dat0 = (cur_rxdly0 >>  0) & 0x1F;
++        orig_dat1 = (cur_rxdly0 >>  8) & 0x1F;
++        orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
++        orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
++    }
++
++    rxdly = 0;
++    do {
++        wrrdly = 0;
++        do {    
++            for (dsmpl = 0; dsmpl < 2; dsmpl++) {
++                cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
++                if (skip == 1) {
++                    skip = 0;
++                    continue; 	
++                }    
++                sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
++                
++                if (host->app_cmd) {
++                    result = msdc_app_cmd(host->mmc, host);	
++                    if (result) {
++                        //printk("TUNE_BWRITE app_cmd<%d> failed\n", host->mrq->cmd->opcode);	
++                        continue;
++                    } 
++                }             
++                result = msdc_do_request(mmc,mrq);
++            
++                //printk("TUNE_BWRITE<%s> DSPL<%d> DATWRDLY<%d> MSDC_DAT_RDDLY0<0x%x>\n", 
++                  //        result == 0 ? "PASS" : "FAIL", 
++                    //      cur_dsmpl, cur_wrrdly, cur_rxdly0);
++            
++                if (result == 0) {
++                    goto done;
++                }
++                else {
++                    /* there is a case: command timeout, and data phase not processed */
++                    if (mrq->data->error != (unsigned int)(-EIO)) {
++                        //printk("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n", 
++                        //  &&         result, mrq->cmd->error, mrq->data->error);	
++                        goto done;     	
++                    }
++                }       
++            }
++            cur_wrrdly = (orig_wrrdly + wrrdly + 1) % 32;
++            sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, cur_wrrdly);             
++        } while (++wrrdly < 32); 
++        
++        cur_dat0 = (orig_dat0 + rxdly) % 32; /* only adjust bit-1 for crc */
++        cur_dat1 = orig_dat1;
++        cur_dat2 = orig_dat2;
++        cur_dat3 = orig_dat3;                    
++    
++        cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);       
++        sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);    
++    } while (++rxdly < 32); 
++
++done:
++    return result;
++}
++
++static int msdc_get_card_status(struct mmc_host *mmc, struct msdc_host *host, u32 *status)
++{
++	struct mmc_command cmd;
++	struct mmc_request mrq;
++	u32 err;
++
++	memset(&cmd, 0, sizeof(struct mmc_command));
++	cmd.opcode = MMC_SEND_STATUS;
++	if (mmc->card) {
++		cmd.arg = mmc->card->rca << 16;
++	} else {
++		//printk("cmd13 mmc card is null\n");
++		cmd.arg = host->app_cmd_arg;
++	}
++	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
++
++	memset(&mrq, 0, sizeof(struct mmc_request));
++	mrq.cmd = &cmd; cmd.mrq = &mrq;
++	cmd.data = NULL;
++
++	err = msdc_do_command(host, &cmd, 1, CMD_TIMEOUT);
++
++	if (status)
++		*status = cmd.resp[0];
++
++	return err;
++}
++
++static int msdc_check_busy(struct mmc_host *mmc, struct msdc_host *host)
++{
++	u32 err = 0;
++	u32 status = 0;
++
++	do {
++		err = msdc_get_card_status(mmc, host, &status);
++		if (err)
++			return err;
++		/* need cmd12? */
++		//printk("cmd<13> resp<0x%x>\n", status);
++	} while (R1_CURRENT_STATE(status) == 7);
++
++	return err;
++}
++
++static int msdc_tune_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++	struct msdc_host *host = mmc_priv(mmc);
++	struct mmc_command *cmd;
++	struct mmc_data *data;
++	int ret=0, read;
++
++	cmd  = mrq->cmd;
++	data = mrq->cmd->data;
++
++	read = data->flags & MMC_DATA_READ ? 1 : 0;
++
++	if (read) {
++		if (data->error == (unsigned int)(-EIO))
++			ret = msdc_tune_bread(mmc,mrq);
++	} else {
++		ret = msdc_check_busy(mmc, host);
++		if (ret){
++			//printk("XXX cmd13 wait program done failed\n");
++			return ret;
++		}
++		/* CRC and TO */
++		/* Fix me: don't care card status? */
++		ret = msdc_tune_bwrite(mmc,mrq);
++	}
++
++	return ret;
++}
++
++static void msdc_ops_request(struct mmc_host *mmc,struct mmc_request *mrq)
++{
++	struct msdc_host *host = mmc_priv(mmc);
++
++	if (host->mrq) {
++		//printk("XXX host->mrq<0x%.8x>\n", (int)host->mrq);
++		BUG();
++	}
++	if (!is_card_present(host) || host->power_mode == MMC_POWER_OFF) {
++		//printk("cmd<%d> card<%d> power<%d>\n", mrq->cmd->opcode, is_card_present(host), host->power_mode);
++		mrq->cmd->error = (unsigned int)-ENOMEDIUM;
++		mrq->done(mrq);
++		return;
++	}
++	spin_lock(&host->lock);
++
++	host->mrq = mrq;
++
++	if (msdc_do_request(mmc,mrq))
++		if(host->hw->flags & MSDC_REMOVABLE && mrq->data && mrq->data->error)
++			msdc_tune_request(mmc,mrq);
++
++	if (mrq->cmd->opcode == MMC_APP_CMD) {
++		host->app_cmd = 1;
++		host->app_cmd_arg = mrq->cmd->arg;  /* save the RCA */
++	} else {
++		host->app_cmd = 0;
++	}
++
++	host->mrq = NULL;
++
++	spin_unlock(&host->lock);
++
++	mmc_request_done(mmc, mrq);
++}
++
++/* called by ops.set_ios */
++static void msdc_set_buswidth(struct msdc_host *host, u32 width)
++{
++    u32 base = host->base;
++    u32 val = sdr_read32(SDC_CFG);
++    
++    val &= ~SDC_CFG_BUSWIDTH;
++    
++    switch (width) {
++    default:
++    case MMC_BUS_WIDTH_1:
++        width = 1;
++        val |= (MSDC_BUS_1BITS << 16);
++        break;
++    case MMC_BUS_WIDTH_4:
++        val |= (MSDC_BUS_4BITS << 16);
++        break;
++    case MMC_BUS_WIDTH_8:
++        val |= (MSDC_BUS_8BITS << 16);
++        break;
++    }
++    
++    sdr_write32(SDC_CFG, val);
++
++    //printk("Bus Width = %d\n", width);
++}
++
++/* ops.set_ios */
++static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++	struct msdc_host *host = mmc_priv(mmc);
++	struct msdc_hw *hw=host->hw;
++	u32 base = host->base;
++	u32 ddr = 0;
++
++#ifdef MT6575_SD_DEBUG
++	static char *vdd[] = {
++	"1.50v", "1.55v", "1.60v", "1.65v", "1.70v", "1.80v", "1.90v",
++	"2.00v", "2.10v", "2.20v", "2.30v", "2.40v", "2.50v", "2.60v",
++	"2.70v", "2.80v", "2.90v", "3.00v", "3.10v", "3.20v", "3.30v",
++	"3.40v", "3.50v", "3.60v"		
++	};
++	static char *power_mode[] = {
++	"OFF", "UP", "ON"
++	};
++	static char *bus_mode[] = {
++	"UNKNOWN", "OPENDRAIN", "PUSHPULL"
++	};
++	static char *timing[] = {
++	"LEGACY", "MMC_HS", "SD_HS"
++	};
++
++	/*printk("SET_IOS: CLK(%dkHz), BUS(%s), BW(%u), PWR(%s), VDD(%s), TIMING(%s)\n",
++	ios->clock / 1000, bus_mode[ios->bus_mode],
++	(ios->bus_width == MMC_BUS_WIDTH_4) ? 4 : 1,
++	power_mode[ios->power_mode], vdd[ios->vdd], timing[ios->timing]);*/
++#endif
++
++	msdc_set_buswidth(host, ios->bus_width);
++
++	/* Power control ??? */
++	switch (ios->power_mode) {
++	case MMC_POWER_OFF:
++	case MMC_POWER_UP:
++		// msdc_set_power_mode(host, ios->power_mode); /* --- by chhung */
++		break;
++	case MMC_POWER_ON:
++		host->power_mode = MMC_POWER_ON;
++		break;
++	default:
++		break;
++	}
++
++	/* Clock control */
++	if (host->mclk != ios->clock) {
++		if(ios->clock > 25000000) {
++			//printk("SD data latch edge<%d>\n", hw->data_edge);
++			sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, hw->cmd_edge);
++			sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, hw->data_edge);
++		} else {
++			sdr_write32(MSDC_IOCON,      0x00000000);
++			sdr_write32(MSDC_DAT_RDDLY0, 0x10101010);	// for MT7620 E2 and afterward
++			sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
++			sdr_write32(MSDC_PAD_TUNE,   0x84101010);	// for MT7620 E2 and afterward
++		}
++		msdc_set_mclk(host, ddr, ios->clock);
++	}
++}
++
++/* ops.get_ro */
++static int msdc_ops_get_ro(struct mmc_host *mmc)
++{
++    struct msdc_host *host = mmc_priv(mmc);
++    u32 base = host->base;
++    unsigned long flags;
++    int ro = 0;
++
++    if (host->hw->flags & MSDC_WP_PIN_EN) { /* set for card */
++        spin_lock_irqsave(&host->lock, flags);
++        ro = (sdr_read32(MSDC_PS) >> 31);
++        spin_unlock_irqrestore(&host->lock, flags);
++    }
++    return ro;
++}
++
++/* ops.get_cd */
++static int msdc_ops_get_cd(struct mmc_host *mmc)
++{
++    struct msdc_host *host = mmc_priv(mmc);
++    u32 base = host->base;    
++    unsigned long flags;
++    int present = 1;
++
++    /* for sdio, MSDC_REMOVABLE not set, always return 1 */
++    if (!(host->hw->flags & MSDC_REMOVABLE)) {
++        /* For sdio, read H/W always get<1>, but may timeout some times */       	    	
++#if 1
++        host->card_inserted = 1;       
++        return 1;
++#else
++        host->card_inserted = (host->pm_state.event == PM_EVENT_USER_RESUME) ? 1 : 0; 
++        printk("sdio ops_get_cd<%d>\n", host->card_inserted);
++        return host->card_inserted; 
++#endif
++    }
++
++    /* MSDC_CD_PIN_EN set for card */
++    if (host->hw->flags & MSDC_CD_PIN_EN) {
++        spin_lock_irqsave(&host->lock, flags);
++#if 0        
++        present = host->card_inserted;  /* why not read from H/W: Fix me*/
++#else
++        present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1; 
++        host->card_inserted = present;  
++#endif        
++        spin_unlock_irqrestore(&host->lock, flags);
++    } else {
++        present = 0; /* TODO? Check DAT3 pins for card detection */
++    }
++
++    //printk("ops_get_cd return<%d>\n", present);
++    return present;
++}
++
++/* ops.enable_sdio_irq */
++static void msdc_ops_enable_sdio_irq(struct mmc_host *mmc, int enable)
++{
++    struct msdc_host *host = mmc_priv(mmc);
++    struct msdc_hw *hw = host->hw;
++    u32 base = host->base;
++    u32 tmp;
++
++    if (hw->flags & MSDC_EXT_SDIO_IRQ) { /* yes for sdio */
++        if (enable) {
++            hw->enable_sdio_eirq();  /* combo_sdio_enable_eirq */
++        } else {
++            hw->disable_sdio_eirq(); /* combo_sdio_disable_eirq */
++        }
++    } else { 
++    	  //printk("XXX \n");  /* so never enter here */
++        tmp = sdr_read32(SDC_CFG);
++        /* FIXME. Need to interrupt gap detection */
++        if (enable) {
++            tmp |= (SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);           
++        } else {
++            tmp &= ~(SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
++        }
++        sdr_write32(SDC_CFG, tmp);      
++    }
++}
++
++static struct mmc_host_ops mt_msdc_ops = {
++    .request         = msdc_ops_request,
++    .set_ios         = msdc_ops_set_ios,
++    .get_ro          = msdc_ops_get_ro,
++    .get_cd          = msdc_ops_get_cd,
++    .enable_sdio_irq = msdc_ops_enable_sdio_irq,
++};
++
++/*--------------------------------------------------------------------------*/
++/* interrupt handler                                                    */
++/*--------------------------------------------------------------------------*/
++static irqreturn_t msdc_irq(int irq, void *dev_id)
++{
++    struct msdc_host  *host = (struct msdc_host *)dev_id;
++    struct mmc_data   *data = host->data;
++    struct mmc_command *cmd = host->cmd;
++    u32 base = host->base;
++        
++    u32 cmdsts = MSDC_INT_RSPCRCERR  | MSDC_INT_CMDTMO  | MSDC_INT_CMDRDY  |
++                 MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO | MSDC_INT_ACMDRDY |
++                 MSDC_INT_ACMD19_DONE;                 
++    u32 datsts = MSDC_INT_DATCRCERR  |MSDC_INT_DATTMO;
++
++    u32 intsts = sdr_read32(MSDC_INT);
++    u32 inten  = sdr_read32(MSDC_INTEN); inten &= intsts; 
++
++    sdr_write32(MSDC_INT, intsts);  /* clear interrupts */
++    /* MSG will cause fatal error */
++        
++    /* card change interrupt */
++    if (intsts & MSDC_INT_CDSC){
++        //printk("MSDC_INT_CDSC irq<0x%.8x>\n", intsts); 
++        tasklet_hi_schedule(&host->card_tasklet);
++        /* tuning when plug card ? */
++    }
++    
++    /* sdio interrupt */
++    if (intsts & MSDC_INT_SDIOIRQ){
++        //printk("XXX MSDC_INT_SDIOIRQ\n");  /* seems not sdio irq */
++        //mmc_signal_sdio_irq(host->mmc);
++    }
++
++    /* transfer complete interrupt */
++    if (data != NULL) {
++        if (inten & MSDC_INT_XFER_COMPL) {       	
++            data->bytes_xfered = host->dma.xfersz;
++            complete(&host->xfer_done);           
++        } 
++        
++        if (intsts & datsts) {         
++            /* do basic reset, or stop command will sdc_busy */
++            msdc_reset();
++            msdc_clr_fifo();        
++            msdc_clr_int();             
++            atomic_set(&host->abort, 1);  /* For PIO mode exit */
++            
++            if (intsts & MSDC_INT_DATTMO){
++               	//printk("XXX CMD<%d> MSDC_INT_DATTMO\n", host->mrq->cmd->opcode);
++               	data->error = (unsigned int)-ETIMEDOUT;
++            }
++            else if (intsts & MSDC_INT_DATCRCERR){
++                //printk("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>\n", host->mrq->cmd->opcode, sdr_read32(SDC_DCRC_STS));
++                data->error = (unsigned int)-EIO;
++            }
++                                    
++            //if(sdr_read32(MSDC_INTEN) & MSDC_INT_XFER_COMPL) {  
++            if (host->dma_xfer) {
++                complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */
++            } /* PIO mode can't do complete, because not init */
++        }
++    }
++
++    /* command interrupts */
++    if ((cmd != NULL) && (intsts & cmdsts)) {
++        if ((intsts & MSDC_INT_CMDRDY) || (intsts & MSDC_INT_ACMDRDY) || 
++            (intsts & MSDC_INT_ACMD19_DONE)) {
++            u32 *rsp = &cmd->resp[0];
++            
++            switch (host->cmd_rsp) {
++            case RESP_NONE:
++                break;
++            case RESP_R2:
++                *rsp++ = sdr_read32(SDC_RESP3); *rsp++ = sdr_read32(SDC_RESP2);
++                *rsp++ = sdr_read32(SDC_RESP1); *rsp++ = sdr_read32(SDC_RESP0);
++                break;
++            default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
++                if ((intsts & MSDC_INT_ACMDRDY) || (intsts & MSDC_INT_ACMD19_DONE)) {
++                    *rsp = sdr_read32(SDC_ACMD_RESP);
++                } else {
++                    *rsp = sdr_read32(SDC_RESP0);    
++                }
++                break;
++            }
++        } else if ((intsts & MSDC_INT_RSPCRCERR) || (intsts & MSDC_INT_ACMDCRCERR)) {
++            if(intsts & MSDC_INT_ACMDCRCERR){
++                //printk("XXX CMD<%d> MSDC_INT_ACMDCRCERR\n",cmd->opcode);
++            } 
++            else {
++                //printk("XXX CMD<%d> MSDC_INT_RSPCRCERR\n",cmd->opcode);
++            }
++            cmd->error = (unsigned int)-EIO;
++        } else if ((intsts & MSDC_INT_CMDTMO) || (intsts & MSDC_INT_ACMDTMO)) {
++            if(intsts & MSDC_INT_ACMDTMO){
++                //printk("XXX CMD<%d> MSDC_INT_ACMDTMO\n",cmd->opcode);
++            }
++            else {
++                //printk("XXX CMD<%d> MSDC_INT_CMDTMO\n",cmd->opcode);
++            }
++            cmd->error = (unsigned int)-ETIMEDOUT;
++            msdc_reset();
++            msdc_clr_fifo();        
++            msdc_clr_int();            
++        }
++        complete(&host->cmd_done);
++    }
++
++    /* mmc irq interrupts */
++    if (intsts & MSDC_INT_MMCIRQ) {
++        //printk(KERN_INFO "msdc[%d] MMCIRQ: SDC_CSTS=0x%.8x\r\n", host->id, sdr_read32(SDC_CSTS));    
++    }
++    
++#ifdef MT6575_SD_DEBUG
++    {
++        msdc_int_reg *int_reg = (msdc_int_reg*)&intsts;
++        /*printk("IRQ_EVT(0x%x): MMCIRQ(%d) CDSC(%d), ACRDY(%d), ACTMO(%d), ACCRE(%d) AC19DN(%d)\n", 
++            intsts,
++            int_reg->mmcirq,
++            int_reg->cdsc,
++            int_reg->atocmdrdy,
++            int_reg->atocmdtmo,
++            int_reg->atocmdcrc,
++            int_reg->atocmd19done);
++        printk("IRQ_EVT(0x%x): SDIO(%d) CMDRDY(%d), CMDTMO(%d), RSPCRC(%d), CSTA(%d)\n", 
++            intsts,
++            int_reg->sdioirq,
++            int_reg->cmdrdy,
++            int_reg->cmdtmo,
++            int_reg->rspcrc,
++            int_reg->csta);
++        printk("IRQ_EVT(0x%x): XFCMP(%d) DXDONE(%d), DATTMO(%d), DATCRC(%d), DMAEMP(%d)\n", 
++            intsts,
++            int_reg->xfercomp,
++            int_reg->dxferdone,
++            int_reg->dattmo,
++            int_reg->datcrc,
++            int_reg->dmaqempty);*/
++
++    }
++#endif
++    
++    return IRQ_HANDLED;
++}
++
++/*--------------------------------------------------------------------------*/
++/* platform_driver members                                                      */
++/*--------------------------------------------------------------------------*/
++/* called by msdc_drv_probe/remove */
++static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
++{
++	struct msdc_hw *hw = host->hw;
++	u32 base = host->base;
++
++	/* for sdio, not set */
++	if ((hw->flags & MSDC_CD_PIN_EN) == 0) {
++		/* Pull down card detection pin since it is not avaiable */
++		/*
++		   if (hw->config_gpio_pin) 
++		   hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
++		   */
++		sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++		sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++		sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
++		return;
++	}
++
++	//printk("CD IRQ Eanable(%d)\n", enable);
++
++	if (enable) {
++	    if (hw->enable_cd_eirq) { /* not set, never enter */
++		    hw->enable_cd_eirq();
++	    } else {
++		    /* card detection circuit relies on the core power so that the core power 
++		     * shouldn't be turned off. Here adds a reference count to keep 
++		     * the core power alive.
++		     */
++		    //msdc_vcore_on(host); //did in msdc_init_hw()
++
++		    if (hw->config_gpio_pin) /* NULL */
++			    hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_UP);
++
++		    sdr_set_field(MSDC_PS, MSDC_PS_CDDEBOUNCE, DEFAULT_DEBOUNCE);
++		    sdr_set_bits(MSDC_PS, MSDC_PS_CDEN);
++		    sdr_set_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++		    sdr_set_bits(SDC_CFG, SDC_CFG_INSWKUP);  /* not in document! Fix me */
++	    }
++    } else {
++	    if (hw->disable_cd_eirq) {
++		    hw->disable_cd_eirq();
++	    } else {
++		    if (hw->config_gpio_pin) /* NULL */
++			    hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
++
++		    sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
++		    sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++		    sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++
++		    /* Here decreases a reference count to core power since card 
++		     * detection circuit is shutdown.
++		     */
++		    //msdc_vcore_off(host);
++	    }
++    }
++}
++
++/* called by msdc_drv_probe */
++static void msdc_init_hw(struct msdc_host *host)
++{
++    u32 base = host->base;
++    struct msdc_hw *hw = host->hw;
++
++#ifdef MT6575_SD_DEBUG	
++    msdc_reg[host->id] = (struct msdc_regs *)host->base;
++#endif
++
++    /* Power on */
++#if 0 /* --- chhung */
++    msdc_vcore_on(host);
++    msdc_pin_reset(host, MSDC_PIN_PULL_UP);
++    msdc_select_clksrc(host, hw->clk_src);
++    enable_clock(PERI_MSDC0_PDN + host->id, "SD");
++    msdc_vdd_on(host);
++#endif /* end of --- */
++    /* Configure to MMC/SD mode */
++    sdr_set_field(MSDC_CFG, MSDC_CFG_MODE, MSDC_SDMMC); 
++       
++    /* Reset */
++    msdc_reset();
++    msdc_clr_fifo();
++
++    /* Disable card detection */
++    sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++
++    /* Disable and clear all interrupts */
++    sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
++    sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
++    
++#if 1
++	/* reset tuning parameter */
++    sdr_write32(MSDC_PAD_CTL0,   0x00090000);
++    sdr_write32(MSDC_PAD_CTL1,   0x000A0000);
++    sdr_write32(MSDC_PAD_CTL2,   0x000A0000);
++    // sdr_write32(MSDC_PAD_TUNE,   0x00000000);
++    sdr_write32(MSDC_PAD_TUNE,   0x84101010);		// for MT7620 E2 and afterward
++    // sdr_write32(MSDC_DAT_RDDLY0, 0x00000000);
++    sdr_write32(MSDC_DAT_RDDLY0, 0x10101010);		// for MT7620 E2 and afterward
++    sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
++    sdr_write32(MSDC_IOCON,      0x00000000);
++#if 0 // use MT7620 default value: 0x403c004f
++    sdr_write32(MSDC_PATCH_BIT0, 0x003C000F); /* bit0 modified: Rx Data Clock Source: 1 -> 2.0*/
++#endif
++
++    if (sdr_read32(MSDC_ECO_VER) >= 4) { 
++        if (host->id == 1) {	
++            sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_WRDAT_CRCS, 1); 
++            sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMD_RSP,    1);
++            
++            /* internal clock: latch read data */  
++            sdr_set_bits(MSDC_PATCH_BIT0, MSDC_PATCH_BIT_CKGEN_CK);  
++        }       	
++    }   
++#endif    
++
++    /* for safety, should clear SDC_CFG.SDIO_INT_DET_EN & set SDC_CFG.SDIO in 
++       pre-loader,uboot,kernel drivers. and SDC_CFG.SDIO_INT_DET_EN will be only
++       set when kernel driver wants to use SDIO bus interrupt */
++    /* Configure to enable SDIO mode. it's must otherwise sdio cmd5 failed */
++    sdr_set_bits(SDC_CFG, SDC_CFG_SDIO);
++
++    /* disable detect SDIO device interupt function */
++    sdr_clr_bits(SDC_CFG, SDC_CFG_SDIOIDE);
++
++    /* eneable SMT for glitch filter */
++    sdr_set_bits(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKSMT);
++    sdr_set_bits(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDSMT);
++    sdr_set_bits(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATSMT);
++
++#if 1
++    /* set clk, cmd, dat pad driving */
++    sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, hw->clk_drv);
++    sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, hw->clk_drv);
++    sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, hw->cmd_drv);
++    sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, hw->cmd_drv);
++    sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, hw->dat_drv);
++    sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, hw->dat_drv);
++#else 
++    sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, 0);
++    sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, 0);
++    sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, 0);
++    sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, 0);
++    sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, 0);
++    sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, 0);
++#endif
++
++    /* set sampling edge */
++
++    /* write crc timeout detection */
++    sdr_set_field(MSDC_PATCH_BIT0, 1 << 30, 1);
++
++    /* Configure to default data timeout */
++    sdr_set_field(SDC_CFG, SDC_CFG_DTOC, DEFAULT_DTOC);
++
++    msdc_set_buswidth(host, MMC_BUS_WIDTH_1);
++
++    //printk("init hardware done!\n");
++}
++
++/* called by msdc_drv_remove */
++static void msdc_deinit_hw(struct msdc_host *host)
++{
++    u32 base = host->base;
++
++    /* Disable and clear all interrupts */
++    sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
++    sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
++
++    /* Disable card detection */
++    msdc_enable_cd_irq(host, 0);
++    // msdc_set_power_mode(host, MMC_POWER_OFF);   /* make sure power down */ /* --- by chhung */
++}
++
++/* init gpd and bd list in msdc_drv_probe */
++static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma)
++{
++    gpd_t *gpd = dma->gpd; 
++    bd_t  *bd  = dma->bd; 	
++    bd_t  *ptr, *prev;
++    
++    /* we just support one gpd */     
++    int bdlen = MAX_BD_PER_GPD;   	
++
++    /* init the 2 gpd */
++    memset(gpd, 0, sizeof(gpd_t) * 2);
++    //gpd->next = (void *)virt_to_phys(gpd + 1); /* pointer to a null gpd, bug! kmalloc <-> virt_to_phys */  
++    //gpd->next = (dma->gpd_addr + 1);    /* bug */
++    gpd->next = (void *)((u32)dma->gpd_addr + sizeof(gpd_t));    
++
++    //gpd->intr = 0;
++    gpd->bdp  = 1;   /* hwo, cs, bd pointer */      
++    //gpd->ptr  = (void*)virt_to_phys(bd); 
++    gpd->ptr = (void *)dma->bd_addr; /* physical address */
++    
++    memset(bd, 0, sizeof(bd_t) * bdlen);
++    ptr = bd + bdlen - 1;
++    //ptr->eol  = 1;  /* 0 or 1 [Fix me]*/
++    //ptr->next = 0;    
++    
++    while (ptr != bd) {
++        prev = ptr - 1;
++        prev->next = (void *)(dma->bd_addr + sizeof(bd_t) *(ptr - bd));
++        ptr = prev;
++    }
++}
++
++static int msdc_drv_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	__iomem void *base;
++    struct mmc_host *mmc;
++    struct resource *mem;
++    struct msdc_host *host;
++    struct msdc_hw *hw;
++    int ret, irq;
++     pdev->dev.platform_data = &msdc0_hw;
++ 
++    /* Allocate MMC host for this device */
++    mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
++    if (!mmc) return -ENOMEM;
++
++    hw   = (struct msdc_hw*)pdev->dev.platform_data;
++    mem  = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++    irq  = platform_get_irq(pdev, 0);
++
++    //BUG_ON((!hw) || (!mem) || (irq < 0)); /* --- by chhung */
++    
++	base = devm_request_and_ioremap(&pdev->dev, res);
++	if (IS_ERR(base))
++		return PTR_ERR(base);
++
++/*    mem = request_mem_region(mem->start - 0xa0000000, (mem->end - mem->start + 1) - 0xa0000000, dev_name(&pdev->dev));
++    if (mem == NULL) {
++        mmc_free_host(mmc);
++        return -EBUSY;
++    }
++*/
++    /* Set host parameters to mmc */
++    mmc->ops        = &mt_msdc_ops;
++    mmc->f_min      = HOST_MIN_MCLK;
++    mmc->f_max      = HOST_MAX_MCLK;
++    mmc->ocr_avail  = MSDC_OCR_AVAIL;
++    
++    /* For sd card: MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED, 
++       For sdio   : MSDC_EXT_SDIO_IRQ | MSDC_HIGHSPEED */
++    if (hw->flags & MSDC_HIGHSPEED) {
++        mmc->caps   = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
++    }
++    if (hw->data_pins == 4) { /* current data_pins are all 4*/
++        mmc->caps  |= MMC_CAP_4_BIT_DATA;
++    } else if (hw->data_pins == 8) {
++        mmc->caps  |= MMC_CAP_8_BIT_DATA;
++    }
++    if ((hw->flags & MSDC_SDIO_IRQ) || (hw->flags & MSDC_EXT_SDIO_IRQ))
++        mmc->caps |= MMC_CAP_SDIO_IRQ;  /* yes for sdio */
++
++    /* MMC core transfer sizes tunable parameters */
++  //  mmc->max_hw_segs   = MAX_HW_SGMTS;
++//    mmc->max_phys_segs = MAX_PHY_SGMTS;
++    mmc->max_seg_size  = MAX_SGMT_SZ;
++    mmc->max_blk_size  = HOST_MAX_BLKSZ;
++    mmc->max_req_size  = MAX_REQ_SZ; 
++    mmc->max_blk_count = mmc->max_req_size;
++
++    host = mmc_priv(mmc);
++    host->hw        = hw;
++    host->mmc       = mmc;
++    host->id        = pdev->id;
++    host->error     = 0;
++    host->irq       = irq;    
++    host->base      = (unsigned long) base;
++    host->mclk      = 0;                   /* mclk: the request clock of mmc sub-system */
++    host->hclk      = hclks[hw->clk_src];  /* hclk: clock of clock source to msdc controller */
++    host->sclk      = 0;                   /* sclk: the really clock after divition */
++    host->pm_state  = PMSG_RESUME;
++    host->suspend   = 0;
++    host->core_clkon = 0;
++    host->card_clkon = 0;    
++    host->core_power = 0;
++    host->power_mode = MMC_POWER_OFF;
++//    host->card_inserted = hw->flags & MSDC_REMOVABLE ? 0 : 1;
++    host->timeout_ns = 0;
++    host->timeout_clks = DEFAULT_DTOC * 65536;
++  
++    host->mrq = NULL; 
++    //init_MUTEX(&host->sem); /* we don't need to support multiple threads access */
++   
++    host->dma.used_gpd = 0;
++    host->dma.used_bd = 0;
++
++    /* using dma_alloc_coherent*/  /* todo: using 1, for all 4 slots */
++    host->dma.gpd = dma_alloc_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), &host->dma.gpd_addr, GFP_KERNEL); 
++    host->dma.bd =  dma_alloc_coherent(NULL, MAX_BD_NUM  * sizeof(bd_t),  &host->dma.bd_addr,  GFP_KERNEL); 
++    BUG_ON((!host->dma.gpd) || (!host->dma.bd));    
++    msdc_init_gpd_bd(host, &host->dma);
++    /*for emmc*/
++    msdc_6575_host[pdev->id] = host;
++    
++    tasklet_init(&host->card_tasklet, msdc_tasklet_card, (ulong)host);
++    spin_lock_init(&host->lock);
++    msdc_init_hw(host);
++
++    ret = request_irq((unsigned int)irq, msdc_irq, IRQF_TRIGGER_LOW, dev_name(&pdev->dev), host);
++    if (ret) goto release;
++    // mt65xx_irq_unmask(irq); /* --- by chhung */
++    
++    if (hw->flags & MSDC_CD_PIN_EN) { /* not set for sdio */
++        if (hw->request_cd_eirq) { /* not set for MT6575 */
++            hw->request_cd_eirq(msdc_eirq_cd, (void*)host); /* msdc_eirq_cd will not be used! */
++        }
++    }
++
++    if (hw->request_sdio_eirq) /* set to combo_sdio_request_eirq() for WIFI */
++        hw->request_sdio_eirq(msdc_eirq_sdio, (void*)host); /* msdc_eirq_sdio() will be called when EIRQ */
++
++    if (hw->register_pm) {/* yes for sdio */
++        if(hw->flags & MSDC_SYS_SUSPEND) { /* will not set for WIFI */
++            //printk("MSDC_SYS_SUSPEND and register_pm both set\n");
++        }
++        //mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* pm not controlled by system but by client. */ /* --- by chhung */
++    }
++    
++    platform_set_drvdata(pdev, mmc);
++
++    ret = mmc_add_host(mmc);
++    if (ret) goto free_irq;
++
++    /* Config card detection pin and enable interrupts */
++    if (hw->flags & MSDC_CD_PIN_EN) {  /* set for card */
++        msdc_enable_cd_irq(host, 1);
++    } else {
++        msdc_enable_cd_irq(host, 0);
++    }  
++
++    return 0;
++
++free_irq:
++    free_irq(irq, host);
++release:
++    platform_set_drvdata(pdev, NULL);
++    msdc_deinit_hw(host);
++
++    tasklet_kill(&host->card_tasklet);
++
++/*    if (mem)
++        release_mem_region(mem->start, mem->end - mem->start + 1);
++*/
++    mmc_free_host(mmc);
++
++    return ret;
++}
++
++/* 4 device share one driver, using "drvdata" to show difference */
++static int msdc_drv_remove(struct platform_device *pdev)
++{
++    struct mmc_host *mmc;
++    struct msdc_host *host;
++    struct resource *mem;
++
++
++    mmc  = platform_get_drvdata(pdev);
++    BUG_ON(!mmc);
++    
++    host = mmc_priv(mmc);   
++    BUG_ON(!host);
++
++    //printk("removed !!!\n");
++
++    platform_set_drvdata(pdev, NULL);
++    mmc_remove_host(host->mmc);
++    msdc_deinit_hw(host);
++
++    tasklet_kill(&host->card_tasklet);
++    free_irq(host->irq, host);
++
++    dma_free_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), host->dma.gpd, host->dma.gpd_addr);
++    dma_free_coherent(NULL, MAX_BD_NUM  * sizeof(bd_t),  host->dma.bd,  host->dma.bd_addr);
++
++    mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++    if (mem)
++        release_mem_region(mem->start, mem->end - mem->start + 1);
++
++    mmc_free_host(host->mmc);
++
++    return 0;
++}
++
++static const struct of_device_id mt7620a_sdhci_match[] = {
++	{ .compatible = "ralink,mt7620a-sdhci" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
++
++/* Fix me: Power Flow */
++static struct platform_driver mt_msdc_driver = {
++    .probe   = msdc_drv_probe,
++    .remove  = msdc_drv_remove,
++    .driver  = {
++        .name  = DRV_NAME,
++        .owner = THIS_MODULE,
++        .of_match_table = mt7620a_sdhci_match,
++
++    },
++};
++
++static int __init mt_msdc_init(void)
++{
++    int ret;
++/* +++ chhung */
++    unsigned int reg;
++
++    mtk_sd_device.dev.platform_data = &msdc0_hw;
++    printk("MTK MSDC device init.\n");
++    reg = sdr_read32((__iomem void *) 0xb0000060) & ~(0x3<<18);
++    reg |= 0x1 << 18;
++    sdr_write32((__iomem void *) 0xb0000060, reg);
++/* end of +++ */
++    ret = platform_driver_register(&mt_msdc_driver);
++    if (ret) {
++        printk(KERN_ERR DRV_NAME ": Can't register driver");
++        return ret;
++    }
++    printk(KERN_INFO DRV_NAME ": MediaTek MT6575 MSDC Driver\n");
++
++    //msdc_debug_proc_init();
++    return 0;
++}
++
++static void __exit mt_msdc_exit(void)
++{
++    platform_driver_unregister(&mt_msdc_driver);
++}
++
++module_init(mt_msdc_init);
++module_exit(mt_msdc_exit);
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("MediaTek MT6575 SD/MMC Card Driver");
++MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>");
++
++EXPORT_SYMBOL(msdc_6575_host);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0148-DMA-MIPS-ralink-add-dmaengine-driver.patch b/target/linux/ramips/patches-3.9/0148-DMA-MIPS-ralink-add-dmaengine-driver.patch
new file mode 100644
index 0000000000..a56ba188f1
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0148-DMA-MIPS-ralink-add-dmaengine-driver.patch
@@ -0,0 +1,341 @@
+From 27eef043b05fb8d9d3178fd3352c530f71901dd4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 23 May 2013 18:45:29 +0200
+Subject: [PATCH 148/164] DMA: MIPS: ralink: add dmaengine driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/dma/Kconfig       |    7 ++
+ drivers/dma/Makefile      |    1 +
+ drivers/dma/ralink_gdma.c |  229 +++++++++++++++++++++++++++++++++++++++++++++
+ drivers/dma/ralink_gdma.h |   55 +++++++++++
+ 4 files changed, 292 insertions(+)
+ create mode 100644 drivers/dma/ralink_gdma.c
+ create mode 100644 drivers/dma/ralink_gdma.h
+
+diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
+index aeaea32..751cdc4 100644
+--- a/drivers/dma/Kconfig
++++ b/drivers/dma/Kconfig
+@@ -322,6 +322,13 @@ config MMP_PDMA
+ 	help
+ 	  Support the MMP PDMA engine for PXA and MMP platfrom.
+ 
++config RALINK_GDMA
++	bool "Ralink Generic DMA support"
++	depends on RALINK
++	select DMA_ENGINE
++	help
++	  Support the GDMA engine for MIPS based Ralink SoC.
++
+ config DMA_ENGINE
+ 	bool
+ 
+diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
+index 488e3ff..f69e07e 100644
+--- a/drivers/dma/Makefile
++++ b/drivers/dma/Makefile
+@@ -37,3 +37,4 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
+ obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
+ obj-$(CONFIG_DMA_OMAP) += omap-dma.o
+ obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
++obj-$(CONFIG_RALINK_GDMA) += ralink_gdma.o
+diff --git a/drivers/dma/ralink_gdma.c b/drivers/dma/ralink_gdma.c
+new file mode 100644
+index 0000000..be7c317
+--- /dev/null
++++ b/drivers/dma/ralink_gdma.c
+@@ -0,0 +1,229 @@
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/of_platform.h>
++#include <linux/memory.h>
++
++#include "ralink_gdma.h"
++
++#define SURFBOARDINT_DMA	10
++#define MEMCPY_DMA_CH	8
++#define to_rt2880_dma_chan(chan)            \
++	container_of(chan, struct rt2880_dma_chan, common)
++
++static dma_cookie_t rt2880_dma_tx_submit(struct dma_async_tx_descriptor *tx)
++{
++	dma_cookie_t cookie;
++
++	cookie = tx->chan->cookie;
++
++	return cookie;
++}
++
++#define MIN_RTDMA_PKT_LEN	128
++static struct dma_async_tx_descriptor *
++rt2880_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
++		size_t len, unsigned long flags)
++{
++	struct rt2880_dma_chan *rt_chan = to_rt2880_dma_chan(chan);
++	unsigned long mid_offset;
++
++	spin_lock_bh(&rt_chan->lock);
++
++	if(len < MIN_RTDMA_PKT_LEN) {
++		memcpy(phys_to_virt(dest), phys_to_virt(src), len);
++	} else {
++		mid_offset = len/2;
++
++		/* Lower parts are transferred  by GDMA.
++		 * Upper parts are transferred by CPU.
++		 */
++		RT_DMA_WRITE_REG(RT_DMA_SRC_REG(MEMCPY_DMA_CH), src);
++		RT_DMA_WRITE_REG(RT_DMA_DST_REG(MEMCPY_DMA_CH), dest);
++		RT_DMA_WRITE_REG(RT_DMA_CTRL_REG(MEMCPY_DMA_CH), (mid_offset << 16) | (3 << 3) | (3 << 0));
++
++		memcpy(phys_to_virt(dest)+mid_offset, phys_to_virt(src)+mid_offset, len-mid_offset);
++
++		dma_async_tx_descriptor_init(&rt_chan->txd, chan);
++
++		while((RT_DMA_READ_REG(RT_DMA_DONEINT) & (0x1<<MEMCPY_DMA_CH))==0);
++		RT_DMA_WRITE_REG(RT_DMA_DONEINT, (1<<MEMCPY_DMA_CH));
++	}
++
++	spin_unlock_bh(&rt_chan->lock);
++
++	return &rt_chan->txd;
++}
++
++/**
++ * rt2880_dma_status - poll the status of an XOR transaction
++ * @chan: XOR channel handle
++ * @cookie: XOR transaction identifier
++ * @txstate: XOR transactions state holder (or NULL)
++ */
++static enum dma_status rt2880_dma_status(struct dma_chan *chan,
++					  dma_cookie_t cookie,
++					  struct dma_tx_state *txstate)
++{
++	return 0;
++}
++
++static irqreturn_t rt2880_dma_interrupt_handler(int irq, void *data)
++{
++
++	printk("%s\n",__FUNCTION__);
++
++	return IRQ_HANDLED;
++}
++
++static void rt2880_dma_issue_pending(struct dma_chan *chan)
++{
++}
++
++static int rt2880_dma_alloc_chan_resources(struct dma_chan *chan)
++{
++//	printk("%s\n",__FUNCTION__);
++
++	return 0;
++}
++
++static void rt2880_dma_free_chan_resources(struct dma_chan *chan)
++{
++//	printk("%s\n",__FUNCTION__);
++
++}
++
++static int rt2880_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
++{
++	switch (cmd) {
++	case DMA_TERMINATE_ALL:
++		printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++		break;
++	case DMA_SLAVE_CONFIG:
++		printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++		break;
++	default:
++		return -ENXIO;
++	}
++
++	return 0;
++}
++
++static int rt2880_dma_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	__iomem void *membase;
++	struct dma_device *dma_dev;
++	struct rt2880_dma_chan *rt_chan;
++	int err;
++	int ret;
++	int reg;
++	int irq;
++
++	membase = devm_request_and_ioremap(&pdev->dev, res);
++	if (IS_ERR(membase))
++		return PTR_ERR(membase);
++
++	dma_dev = devm_kzalloc(&pdev->dev, sizeof(*dma_dev), GFP_KERNEL);
++	if (!dma_dev)
++		return -ENOMEM;
++
++	irq = platform_get_irq(pdev, 0);
++	if (!irq) {
++		dev_err(&pdev->dev, "failed to load irq\n");
++		return -ENOENT;
++	}
++
++
++	INIT_LIST_HEAD(&dma_dev->channels);
++	dma_cap_zero(dma_dev->cap_mask);
++	dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
++	dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
++	dma_dev->device_alloc_chan_resources = rt2880_dma_alloc_chan_resources;
++	dma_dev->device_free_chan_resources = rt2880_dma_free_chan_resources;
++	dma_dev->device_tx_status = rt2880_dma_status;
++	dma_dev->device_issue_pending = rt2880_dma_issue_pending;
++	dma_dev->device_prep_dma_memcpy = rt2880_dma_prep_dma_memcpy;
++	dma_dev->device_control = rt2880_dma_control;
++	dma_dev->dev = &pdev->dev;
++
++	rt_chan = devm_kzalloc(&pdev->dev, sizeof(*rt_chan), GFP_KERNEL);
++        if (!rt_chan) {
++		return -ENOMEM;
++	}
++
++	spin_lock_init(&rt_chan->lock);
++        INIT_LIST_HEAD(&rt_chan->chain);
++	INIT_LIST_HEAD(&rt_chan->completed_slots);
++	INIT_LIST_HEAD(&rt_chan->all_slots);
++	rt_chan->common.device = dma_dev;
++	rt_chan->txd.tx_submit = rt2880_dma_tx_submit;
++
++	list_add_tail(&rt_chan->common.device_node, &dma_dev->channels);
++
++	err = dma_async_device_register(dma_dev);
++	if (0 != err) {
++		pr_err("ERR_MDMA:device_register failed: %d\n", err);
++		return 1;
++	}
++
++	ret = request_irq(irq, rt2880_dma_interrupt_handler, 0, dev_name(&pdev->dev), NULL);
++	if(ret){
++		pr_err("IRQ %d is not free.\n", SURFBOARDINT_DMA);
++		return 1;
++	}
++
++	//set GDMA register in advance.
++	reg = (32 << 16) | (32 << 8) | (MEMCPY_DMA_CH << 3);
++	RT_DMA_WRITE_REG(RT_DMA_CTRL_REG1(MEMCPY_DMA_CH), reg);
++
++	dev_info(&pdev->dev, "running\n");
++
++	return 0;
++}
++
++static int rt2880_dma_remove(struct platform_device *dev)
++{
++	struct dma_device *dma_dev = platform_get_drvdata(dev);
++
++	printk("%s\n",__FUNCTION__);
++
++	dma_async_device_unregister(dma_dev);
++
++	return 0;
++}
++
++static const struct of_device_id rt2880_dma_match[] = {
++	{ .compatible = "ralink,rt2880-gdma" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, rt2880_wdt_match);
++
++static struct platform_driver rt2880_dma_driver = {
++	.probe		= rt2880_dma_probe,
++	.remove		= rt2880_dma_remove,
++	.driver		= {
++		.owner	= THIS_MODULE,
++		.name	= RT_DMA_NAME,
++		.of_match_table = rt2880_dma_match,
++	},
++};
++
++static int __init rt2880_dma_init(void)
++{
++	int rc;
++
++	rc = platform_driver_register(&rt2880_dma_driver);
++	return rc;
++}
++module_init(rt2880_dma_init);
++
++MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("DMA engine driver for Ralink DMA engine");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/dma/ralink_gdma.h b/drivers/dma/ralink_gdma.h
+new file mode 100644
+index 0000000..73e1948
+--- /dev/null
++++ b/drivers/dma/ralink_gdma.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2007, 2008, Marvell International Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms and conditions of the GNU General Public License,
++ * version 2, as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++
++#ifndef RT_DMA_H
++#define RT_DMA_H
++
++#include <linux/types.h>
++#include <linux/io.h>
++#include <linux/dmaengine.h>
++#include <linux/interrupt.h>
++
++#define RT_DMA_NAME		"rt2880_dma"
++
++#define RALINK_GDMA_BASE	0xB0002800
++
++struct rt2880_dma_chan {
++        int                     pending;
++        dma_cookie_t            completed_cookie;
++        spinlock_t              lock; /* protects the descriptor slot pool */
++        void __iomem            *mmr_base;
++        unsigned int            idx;
++        enum dma_transaction_type       current_type;
++	struct dma_async_tx_descriptor txd;
++        struct list_head        chain;
++        struct list_head        completed_slots;
++        struct dma_chan         common;
++        struct list_head        all_slots;
++        int                     slots_allocated;
++        struct tasklet_struct   irq_tasklet;
++};
++
++#define RT_DMA_READ_REG(addr)             le32_to_cpu(*(volatile u32 *)(addr))
++#define RT_DMA_WRITE_REG(addr, val)       *((volatile uint32_t *)(addr)) = cpu_to_le32(val)
++
++#define RT_DMA_SRC_REG(ch)                (RALINK_GDMA_BASE + ch*16)
++#define RT_DMA_DST_REG(ch)                (RT_DMA_SRC_REG(ch) + 4)
++#define RT_DMA_CTRL_REG(ch)               (RT_DMA_DST_REG(ch) + 4)
++#define RT_DMA_CTRL_REG1(ch)              (RT_DMA_CTRL_REG(ch) + 4)
++#define RT_DMA_DONEINT			  (RALINK_GDMA_BASE + 0x204)
++
++#endif
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0149-PCI-MIPS-adds-rt2880-pci-support.patch b/target/linux/ramips/patches-3.9/0149-PCI-MIPS-adds-rt2880-pci-support.patch
new file mode 100644
index 0000000000..da94ee690a
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0149-PCI-MIPS-adds-rt2880-pci-support.patch
@@ -0,0 +1,329 @@
+From 7cc89e7fc028a8e23b5dc226be5cf94b33764885 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 21 Mar 2013 18:27:29 +0100
+Subject: [PATCH 149/164] PCI: MIPS: adds rt2880 pci support
+
+Add support for the pci found on the rt2880 SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/pci/Makefile     |    1 +
+ arch/mips/pci/pci-rt2880.c |  281 ++++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/Kconfig   |    1 +
+ 3 files changed, 283 insertions(+)
+ create mode 100644 arch/mips/pci/pci-rt2880.c
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 2cb1d31..77974ba 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
+ obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
++obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
+ obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
+diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
+new file mode 100644
+index 0000000..e2c4730
+--- /dev/null
++++ b/arch/mips/pci/pci-rt2880.c
+@@ -0,0 +1,281 @@
++/*
++ *  Ralink RT288x SoC PCI register definitions
++ *
++ *  Copyright (C) 2009 John Crispin <blogic@openwrt.org>
++ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  Parts of this file are based on Ralink's 2.6.21 BSP
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++
++#include <asm/mach-ralink/rt288x.h>
++
++#define RT2880_PCI_BASE		0x00440000
++#define RT288X_CPU_IRQ_PCI	4
++
++#define RT2880_PCI_MEM_BASE	0x20000000
++#define RT2880_PCI_MEM_SIZE	0x10000000
++#define RT2880_PCI_IO_BASE	0x00460000
++#define RT2880_PCI_IO_SIZE	0x00010000
++
++#define RT2880_PCI_REG_PCICFG_ADDR	0x00
++#define RT2880_PCI_REG_PCIMSK_ADDR	0x0c
++#define RT2880_PCI_REG_BAR0SETUP_ADDR	0x10
++#define RT2880_PCI_REG_IMBASEBAR0_ADDR	0x18
++#define RT2880_PCI_REG_CONFIG_ADDR	0x20
++#define RT2880_PCI_REG_CONFIG_DATA	0x24
++#define RT2880_PCI_REG_MEMBASE		0x28
++#define RT2880_PCI_REG_IOBASE		0x2c
++#define RT2880_PCI_REG_ID		0x30
++#define RT2880_PCI_REG_CLASS		0x34
++#define RT2880_PCI_REG_SUBID		0x38
++#define RT2880_PCI_REG_ARBCTL		0x80
++
++static void __iomem *rt2880_pci_base;
++static DEFINE_SPINLOCK(rt2880_pci_lock);
++
++static u32 rt2880_pci_reg_read(u32 reg)
++{
++	return readl(rt2880_pci_base + reg);
++}
++
++static void rt2880_pci_reg_write(u32 val, u32 reg)
++{
++	writel(val, rt2880_pci_base + reg);
++}
++
++static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
++					 unsigned int func, unsigned int where)
++{
++	return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
++		0x80000000);
++}
++
++static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
++				  int where, int size, u32 *val)
++{
++	unsigned long flags;
++	u32 address;
++	u32 data;
++
++	address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
++					 PCI_FUNC(devfn), where);
++
++	spin_lock_irqsave(&rt2880_pci_lock, flags);
++	rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
++	data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
++	spin_unlock_irqrestore(&rt2880_pci_lock, flags);
++
++	switch (size) {
++	case 1:
++		*val = (data >> ((where & 3) << 3)) & 0xff;
++		break;
++	case 2:
++		*val = (data >> ((where & 3) << 3)) & 0xffff;
++		break;
++	case 4:
++		*val = data;
++		break;
++	}
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
++				   int where, int size, u32 val)
++{
++	unsigned long flags;
++	u32 address;
++	u32 data;
++
++	address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
++					 PCI_FUNC(devfn), where);
++
++	spin_lock_irqsave(&rt2880_pci_lock, flags);
++	rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
++	data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
++
++	switch (size) {
++	case 1:
++		data = (data & ~(0xff << ((where & 3) << 3))) |
++		       (val << ((where & 3) << 3));
++		break;
++	case 2:
++		data = (data & ~(0xffff << ((where & 3) << 3))) |
++		       (val << ((where & 3) << 3));
++		break;
++	case 4:
++		data = val;
++		break;
++	}
++
++	rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
++	spin_unlock_irqrestore(&rt2880_pci_lock, flags);
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++static struct pci_ops rt2880_pci_ops = {
++	.read	= rt2880_pci_config_read,
++	.write	= rt2880_pci_config_write,
++};
++
++static struct resource rt2880_pci_mem_resource = {
++	.name	= "PCI MEM space",
++	.start	= RT2880_PCI_MEM_BASE,
++	.end	= RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct resource rt2880_pci_io_resource = {
++	.name	= "PCI IO space",
++	.start	= RT2880_PCI_IO_BASE,
++	.end	= RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
++	.flags	= IORESOURCE_IO,
++};
++
++static struct pci_controller rt2880_pci_controller = {
++	.pci_ops	= &rt2880_pci_ops,
++	.mem_resource	= &rt2880_pci_mem_resource,
++	.io_resource	= &rt2880_pci_io_resource,
++};
++
++static inline u32 rt2880_pci_read_u32(unsigned long reg)
++{
++	unsigned long flags;
++	u32 address;
++	u32 ret;
++
++	address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
++
++	spin_lock_irqsave(&rt2880_pci_lock, flags);
++	rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
++	ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
++	spin_unlock_irqrestore(&rt2880_pci_lock, flags);
++
++	return ret;
++}
++
++static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
++{
++	unsigned long flags;
++	u32 address;
++
++	address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
++
++	spin_lock_irqsave(&rt2880_pci_lock, flags);
++	rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
++	rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
++	spin_unlock_irqrestore(&rt2880_pci_lock, flags);
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	u16 cmd;
++	int irq = -1;
++
++	if (dev->bus->number != 0)
++		return irq;
++
++	switch (PCI_SLOT(dev->devfn)) {
++	case 0x00:
++		rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
++		(void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
++		break;
++	case 0x11:
++		irq = RT288X_CPU_IRQ_PCI;
++		break;
++	default:
++		printk("%s:%s[%d] trying to alloc unknown pci irq\n",
++		       __FILE__, __func__, __LINE__);
++		BUG();
++		break;
++	}
++
++	pci_write_config_byte((struct pci_dev*)dev, PCI_CACHE_LINE_SIZE, 0x14);
++	pci_write_config_byte((struct pci_dev*)dev, PCI_LATENCY_TIMER, 0xFF);
++	pci_read_config_word((struct pci_dev*)dev, PCI_COMMAND, &cmd);
++	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
++	       PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK |
++	       PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY;
++	pci_write_config_word((struct pci_dev*)dev, PCI_COMMAND, cmd);
++	pci_write_config_byte((struct pci_dev*)dev, PCI_INTERRUPT_LINE,
++			      dev->irq);
++	return irq;
++}
++
++static int rt288x_pci_probe(struct platform_device *pdev)
++{
++	void __iomem *io_map_base;
++	int i;
++
++	rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE);
++
++	io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
++	rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
++	set_io_port_base((unsigned long) io_map_base);
++
++	ioport_resource.start = RT2880_PCI_IO_BASE;
++	ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
++
++	rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
++	for(i = 0; i < 0xfffff; i++) {}
++
++	rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
++	rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
++	rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
++	rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
++	rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
++	rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
++	rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
++	rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
++	rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
++
++	rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
++	(void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
++
++	register_pci_controller(&rt2880_pci_controller);
++	return 0;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++	return 0;
++}
++
++static const struct of_device_id rt288x_pci_match[] = {
++	{ .compatible = "ralink,rt288x-pci" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, rt288x_pci_match);
++
++static struct platform_driver rt288x_pci_driver = {
++	.probe = rt288x_pci_probe,
++	.driver = {
++		.name = "rt288x-pci",
++		.owner = THIS_MODULE,
++		.of_match_table = rt288x_pci_match,
++	},
++};
++
++int __init pcibios_init(void)
++{
++	int ret = platform_driver_register(&rt288x_pci_driver);
++	if (ret)
++		pr_info("rt288x-pci: Error registering platform driver!");
++	return ret;
++}
++
++arch_initcall(pcibios_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 3fe032c..c0ac93a 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -8,6 +8,7 @@ choice
+ 
+ 	config SOC_RT288X
+ 		bool "RT288x"
++		select HW_HAS_PCI
+ 
+ 	config SOC_RT305X
+ 		bool "RT305x"
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0150-PCI-MIPS-adds-rt3883-pci-support.patch b/target/linux/ramips/patches-3.9/0150-PCI-MIPS-adds-rt3883-pci-support.patch
new file mode 100644
index 0000000000..20ae55875f
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0150-PCI-MIPS-adds-rt3883-pci-support.patch
@@ -0,0 +1,688 @@
+From 9e3707ddded9895aa47e11b42125a94f04f8bd9d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 21 Mar 2013 17:34:08 +0100
+Subject: [PATCH 150/164] PCI: MIPS: adds rt3883 pci support
+
+Add support for the pcie found on the rt3883 SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/pci/Makefile     |    1 +
+ arch/mips/pci/pci-rt3883.c |  640 ++++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/Kconfig   |    1 +
+ 3 files changed, 642 insertions(+)
+ create mode 100644 arch/mips/pci/pci-rt3883.c
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 77974ba..3cbfd9b 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
+ obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
++obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
+ obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
+diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
+new file mode 100644
+index 0000000..212c90b
+--- /dev/null
++++ b/arch/mips/pci/pci-rt3883.c
+@@ -0,0 +1,640 @@
++/*
++ *  Ralink RT3662/RT3883 SoC PCI support
++ *
++ *  Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  Parts of this file are based on Ralink's 2.6.21 BSP
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/rt3883.h>
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RT3883_MEMORY_BASE		0x00000000
++#define RT3883_MEMORY_SIZE		0x02000000
++
++#define RT3883_PCI_REG_PCICFG		0x00
++#define   RT3883_PCICFG_P2P_BR_DEVNUM_M 0xf
++#define   RT3883_PCICFG_P2P_BR_DEVNUM_S 16
++#define   RT3883_PCICFG_PCIRST		BIT(1)
++#define RT3883_PCI_REG_PCIRAW		0x04
++#define RT3883_PCI_REG_PCIINT		0x08
++#define RT3883_PCI_REG_PCIENA		0x0c
++
++#define RT3883_PCI_REG_CFGADDR		0x20
++#define RT3883_PCI_REG_CFGDATA		0x24
++#define RT3883_PCI_REG_MEMBASE		0x28
++#define RT3883_PCI_REG_IOBASE		0x2c
++#define RT3883_PCI_REG_ARBCTL		0x80
++
++#define RT3883_PCI_REG_BASE(_x)		(0x1000 + (_x) * 0x1000)
++#define RT3883_PCI_REG_BAR0SETUP(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x10)
++#define RT3883_PCI_REG_IMBASEBAR0(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x18)
++#define RT3883_PCI_REG_ID(_x)		(RT3883_PCI_REG_BASE((_x)) + 0x30)
++#define RT3883_PCI_REG_CLASS(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x34)
++#define RT3883_PCI_REG_SUBID(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x38)
++#define RT3883_PCI_REG_STATUS(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x50)
++
++#define RT3883_PCI_MODE_NONE	0
++#define RT3883_PCI_MODE_PCI	BIT(0)
++#define RT3883_PCI_MODE_PCIE	BIT(1)
++#define RT3883_PCI_MODE_BOTH	(RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE)
++
++#define RT3883_PCI_IRQ_COUNT	32
++
++#define RT3883_P2P_BR_DEVNUM	1
++
++struct rt3883_pci_controller {
++	void __iomem *base;
++	spinlock_t lock;
++
++	struct irq_domain *irq_domain;
++
++	struct pci_controller pci_controller;
++	struct resource io_res;
++	struct resource mem_res;
++
++	bool pcie_ready;
++	unsigned char p2p_devnum;
++};
++
++static inline struct rt3883_pci_controller *
++pci_bus_to_rt3883_controller(struct pci_bus *bus)
++{
++	struct pci_controller *hose;
++
++	hose = (struct pci_controller *) bus->sysdata;
++	return container_of(hose, struct rt3883_pci_controller, pci_controller);
++}
++
++static inline u32 rt3883_pci_r32(struct rt3883_pci_controller *rpc,
++				 unsigned reg)
++{
++	return ioread32(rpc->base + reg);
++}
++
++static inline void rt3883_pci_w32(struct rt3883_pci_controller *rpc,
++				  u32 val, unsigned reg)
++{
++	iowrite32(val, rpc->base + reg);
++}
++
++static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
++					 unsigned int func, unsigned int where)
++{
++	return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
++		0x80000000);
++}
++
++static u32 rt3883_pci_read_cfg32(struct rt3883_pci_controller *rpc,
++			       unsigned bus, unsigned slot,
++			       unsigned func, unsigned reg)
++{
++	unsigned long flags;
++	u32 address;
++	u32 ret;
++
++	address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
++
++	spin_lock_irqsave(&rpc->lock, flags);
++	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
++	ret = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
++	spin_unlock_irqrestore(&rpc->lock, flags);
++
++	return ret;
++}
++
++static void rt3883_pci_write_cfg32(struct rt3883_pci_controller *rpc,
++				 unsigned bus, unsigned slot,
++				 unsigned func, unsigned reg, u32 val)
++{
++	unsigned long flags;
++	u32 address;
++
++	address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
++
++	spin_lock_irqsave(&rpc->lock, flags);
++	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
++	rt3883_pci_w32(rpc, val, RT3883_PCI_REG_CFGDATA);
++	spin_unlock_irqrestore(&rpc->lock, flags);
++}
++
++static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++	struct rt3883_pci_controller *rpc;
++	u32 pending;
++
++	rpc = irq_get_handler_data(irq);
++
++	pending = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIINT) &
++		  rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
++
++	if (!pending) {
++		spurious_interrupt();
++		return;
++	}
++
++	while (pending) {
++		unsigned bit = __ffs(pending);
++
++		irq = irq_find_mapping(rpc->irq_domain, bit);
++		generic_handle_irq(irq);
++
++		pending &= ~BIT(bit);
++	}
++}
++
++static void rt3883_pci_irq_unmask(struct irq_data *d)
++{
++	struct rt3883_pci_controller *rpc;
++	u32 t;
++
++	rpc = irq_data_get_irq_chip_data(d);
++
++	t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
++	rt3883_pci_w32(rpc, t | BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
++	/* flush write */
++	rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
++}
++
++static void rt3883_pci_irq_mask(struct irq_data *d)
++{
++	struct rt3883_pci_controller *rpc;
++	u32 t;
++
++	rpc = irq_data_get_irq_chip_data(d);
++
++	t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
++	rt3883_pci_w32(rpc, t & ~BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
++	/* flush write */
++	rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
++}
++
++static struct irq_chip rt3883_pci_irq_chip = {
++	.name		= "RT3883 PCI",
++	.irq_mask	= rt3883_pci_irq_mask,
++	.irq_unmask	= rt3883_pci_irq_unmask,
++	.irq_mask_ack	= rt3883_pci_irq_mask,
++};
++
++static int rt3883_pci_irq_map(struct irq_domain *d, unsigned int irq,
++			      irq_hw_number_t hw)
++{
++	irq_set_chip_and_handler(irq, &rt3883_pci_irq_chip, handle_level_irq);
++	irq_set_chip_data(irq, d->host_data);
++
++	return 0;
++}
++
++static const struct irq_domain_ops rt3883_pci_irq_domain_ops = {
++	.map = rt3883_pci_irq_map,
++	.xlate = irq_domain_xlate_onecell,
++};
++
++static int rt3883_pci_irq_init(struct device *dev,
++			       struct rt3883_pci_controller *rpc)
++{
++	struct device_node *np = dev->of_node;
++	struct device_node *intc_np;
++	int irq;
++	int err;
++
++	intc_np = of_get_child_by_name(np, "interrupt-controller");
++	if (!intc_np) {
++		dev_err(dev, "no %s child node found", "interrupt-controller");
++		return -ENODEV;
++	}
++
++	irq = irq_of_parse_and_map(intc_np, 0);
++	if (irq == 0) {
++		dev_err(dev, "%s has no IRQ", of_node_full_name(intc_np));
++		err = -EINVAL;
++		goto err_put_intc;
++	}
++
++	/* disable all interrupts */
++	rt3883_pci_w32(rpc, 0, RT3883_PCI_REG_PCIENA);
++
++	rpc->irq_domain =
++		irq_domain_add_linear(intc_np, RT3883_PCI_IRQ_COUNT,
++				      &rt3883_pci_irq_domain_ops,
++				      rpc);
++	if (!rpc->irq_domain) {
++		dev_err(dev, "unable to add IRQ domain\n");
++		err = -ENODEV;
++		goto err_put_intc;
++	}
++
++	irq_set_handler_data(irq, rpc);
++	irq_set_chained_handler(irq, rt3883_pci_irq_handler);
++
++	return 0;
++
++err_put_intc:
++	of_node_put(intc_np);
++	return err;
++}
++
++static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn,
++				  int where, int size, u32 *val)
++{
++	struct rt3883_pci_controller *rpc;
++	unsigned long flags;
++	u32 address;
++	u32 data;
++
++	rpc = pci_bus_to_rt3883_controller(bus);
++
++	if (!rpc->pcie_ready && bus->number == 1)
++		return PCIBIOS_DEVICE_NOT_FOUND;
++
++	address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
++					 PCI_FUNC(devfn), where);
++
++	spin_lock_irqsave(&rpc->lock, flags);
++	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
++	data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
++	spin_unlock_irqrestore(&rpc->lock, flags);
++
++	switch (size) {
++	case 1:
++		*val = (data >> ((where & 3) << 3)) & 0xff;
++		break;
++	case 2:
++		*val = (data >> ((where & 3) << 3)) & 0xffff;
++		break;
++	case 4:
++		*val = data;
++		break;
++	}
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn,
++				   int where, int size, u32 val)
++{
++	struct rt3883_pci_controller *rpc;
++	unsigned long flags;
++	u32 address;
++	u32 data;
++
++	rpc = pci_bus_to_rt3883_controller(bus);
++
++	if (!rpc->pcie_ready && bus->number == 1)
++		return PCIBIOS_DEVICE_NOT_FOUND;
++
++	address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
++					 PCI_FUNC(devfn), where);
++
++	spin_lock_irqsave(&rpc->lock, flags);
++	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
++	data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
++
++	switch (size) {
++	case 1:
++		data = (data & ~(0xff << ((where & 3) << 3))) |
++		       (val << ((where & 3) << 3));
++		break;
++	case 2:
++		data = (data & ~(0xffff << ((where & 3) << 3))) |
++		       (val << ((where & 3) << 3));
++		break;
++	case 4:
++		data = val;
++		break;
++	}
++
++	rt3883_pci_w32(rpc, data, RT3883_PCI_REG_CFGDATA);
++	spin_unlock_irqrestore(&rpc->lock, flags);
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++static struct pci_ops rt3883_pci_ops = {
++	.read	= rt3883_pci_config_read,
++	.write	= rt3883_pci_config_write,
++};
++
++static void rt3883_pci_preinit(struct rt3883_pci_controller *rpc, unsigned mode)
++{
++	u32 syscfg1;
++	u32 rstctrl;
++	u32 clkcfg1;
++	u32 t;
++
++	rstctrl = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
++	syscfg1 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
++	clkcfg1 = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
++
++	if (mode & RT3883_PCI_MODE_PCIE) {
++		rstctrl |= RT3883_RSTCTRL_PCIE;
++		rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
++
++		/* setup PCI PAD drive mode */
++		syscfg1 &= ~(0x30);
++		syscfg1 |= (2 << 4);
++		rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
++
++		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
++		t &= ~BIT(31);
++		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
++
++		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
++		t &= 0x80ffffff;
++		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
++
++		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
++		t |= 0xa << 24;
++		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
++
++		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
++		t |= BIT(31);
++		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
++
++		msleep(50);
++
++		rstctrl &= ~RT3883_RSTCTRL_PCIE;
++		rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
++	}
++
++	syscfg1 |= (RT3883_SYSCFG1_PCIE_RC_MODE | RT3883_SYSCFG1_PCI_HOST_MODE);
++
++	clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | RT3883_CLKCFG1_PCIE_CLK_EN);
++
++	if (mode & RT3883_PCI_MODE_PCI) {
++		clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN;
++		rstctrl &= ~RT3883_RSTCTRL_PCI;
++	}
++
++	if (mode & RT3883_PCI_MODE_PCIE) {
++		clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN;
++		rstctrl &= ~RT3883_RSTCTRL_PCIE;
++	}
++
++	rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
++	rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
++	rt_sysc_w32(clkcfg1, RT3883_SYSC_REG_CLKCFG1);
++
++	msleep(500);
++
++	/*
++	 * setup the device number of the P2P bridge
++	 * and de-assert the reset line
++	 */
++	t = (RT3883_P2P_BR_DEVNUM << RT3883_PCICFG_P2P_BR_DEVNUM_S);
++	rt3883_pci_w32(rpc, t, RT3883_PCI_REG_PCICFG);
++
++	/* flush write */
++	rt3883_pci_r32(rpc, RT3883_PCI_REG_PCICFG);
++	msleep(500);
++
++	if (mode & RT3883_PCI_MODE_PCIE) {
++		msleep(500);
++
++		t = rt3883_pci_r32(rpc, RT3883_PCI_REG_STATUS(1));
++
++		rpc->pcie_ready = t & BIT(0);
++
++		if (!rpc->pcie_ready) {
++			/* reset the PCIe block */
++			t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
++			t |= RT3883_RSTCTRL_PCIE;
++			rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
++			t &= ~RT3883_RSTCTRL_PCIE;
++			rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
++
++			/* turn off PCIe clock */
++			t = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
++			t &= ~RT3883_CLKCFG1_PCIE_CLK_EN;
++			rt_sysc_w32(t, RT3883_SYSC_REG_CLKCFG1);
++
++			t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
++			t &= ~0xf000c080;
++			rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
++		}
++	}
++
++	/* enable PCI arbiter */
++	rt3883_pci_w32(rpc, 0x79, RT3883_PCI_REG_ARBCTL);
++}
++
++static inline void
++rt3883_dump_pci_config(struct rt3883_pci_controller *rpc,
++		       int bus, int slot)
++{
++	int i;
++
++	for (i = 0; i < 16; i++) {
++		u32 val;
++
++		val = rt3883_pci_read_cfg32(rpc, bus, slot, 0, i << 2);
++		pr_info("pci %02x:%02x.0 0x%02x = %08x\n",
++		        bus, slot, i << 2, val);
++	}
++}
++
++static int rt3883_pci_probe(struct platform_device *pdev)
++{
++	struct rt3883_pci_controller *rpc;
++	struct device *dev = &pdev->dev;
++	struct device_node *np = dev->of_node;
++	struct resource *res;
++	struct device_node *child;
++	u32 val;
++	int err;
++	int mode;
++
++	rpc = devm_kzalloc(dev, sizeof(*rpc), GFP_KERNEL);
++	if (!rpc)
++		return -ENOMEM;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -EINVAL;
++
++	rpc->base = devm_ioremap_resource(dev, res);
++	if (IS_ERR(rpc->base))
++		return PTR_ERR(rpc->base);
++
++	rpc->pci_controller.of_node = of_get_child_by_name(np, "host-bridge");
++	if (!rpc->pci_controller.of_node) {
++		dev_err(dev, "no %s child node found", "host-bridge");
++		return -ENODEV;
++	}
++
++	mode = RT3883_PCI_MODE_NONE;
++	for_each_child_of_node(rpc->pci_controller.of_node, child) {
++		u32 slot;
++
++		if (!of_device_is_available(child))
++			continue;
++
++		if (of_property_read_u32(child, "ralink,pci-slot",
++					 &slot)) {
++			dev_err(dev, "no '%s' property found for %s\n",
++				"ralink,pci-slot",
++				of_node_full_name(child));
++			continue;
++		}
++
++		switch (slot) {
++		case 1:
++			mode |= RT3883_PCI_MODE_PCIE;
++			break;
++
++		case 17:
++		case 18:
++			mode |= RT3883_PCI_MODE_PCI;
++			break;
++		}
++	}
++
++	if (mode == RT3883_PCI_MODE_NONE) {
++		dev_err(dev, "unable to determine PCI mode\n");
++		err = -EINVAL;
++		goto err_put_hb_node;
++	}
++
++	dev_info(dev, "mode:%s%s\n",
++		 (mode & RT3883_PCI_MODE_PCI) ? " PCI" : "",
++		 (mode & RT3883_PCI_MODE_PCIE) ? " PCIe" : "");
++
++	rt3883_pci_preinit(rpc, mode);
++
++	rpc->pci_controller.pci_ops = &rt3883_pci_ops;
++	rpc->pci_controller.io_resource = &rpc->io_res;
++	rpc->pci_controller.mem_resource = &rpc->mem_res;
++
++	/* Load PCI I/O and memory resources from DT */
++	pci_load_of_ranges(&rpc->pci_controller,
++			   rpc->pci_controller.of_node);
++
++	rt3883_pci_w32(rpc, rpc->mem_res.start, RT3883_PCI_REG_MEMBASE);
++	rt3883_pci_w32(rpc, rpc->io_res.start, RT3883_PCI_REG_IOBASE);
++
++	ioport_resource.start = rpc->io_res.start;
++	ioport_resource.end = rpc->io_res.end;
++
++	/* PCI */
++	rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(0));
++	rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(0));
++	rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(0));
++	rt3883_pci_w32(rpc, 0x00800001, RT3883_PCI_REG_CLASS(0));
++	rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(0));
++
++	/* PCIe */
++	rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(1));
++	rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(1));
++	rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(1));
++	rt3883_pci_w32(rpc, 0x06040001, RT3883_PCI_REG_CLASS(1));
++	rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(1));
++
++	err = rt3883_pci_irq_init(dev, rpc);
++	if (err)
++		goto err_put_hb_node;
++
++	/* PCIe */
++	val = rt3883_pci_read_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND);
++	val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
++	rt3883_pci_write_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND, val);
++
++	/* PCI */
++	val = rt3883_pci_read_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND);
++	val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
++	rt3883_pci_write_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND, val);
++
++	if (mode == RT3883_PCI_MODE_PCIE) {
++		rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(0));
++		rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(1));
++
++		rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
++				       PCI_BASE_ADDRESS_0,
++				       RT3883_MEMORY_BASE);
++		/* flush write */
++		rt3883_pci_read_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
++				      PCI_BASE_ADDRESS_0);
++	} else {
++		rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
++				       PCI_IO_BASE, 0x00000101);
++	}
++
++	register_pci_controller(&rpc->pci_controller);
++
++	return 0;
++
++err_put_hb_node:
++	of_node_put(rpc->pci_controller.of_node);
++	return err;
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	struct rt3883_pci_controller *rpc;
++	struct of_irq dev_irq;
++	int err;
++	int irq;
++
++	rpc = pci_bus_to_rt3883_controller(dev->bus);
++	err = of_irq_map_pci(dev, &dev_irq);
++	if (err) {
++		pr_err("pci %s: unable to get irq map, err=%d\n",
++		       pci_name((struct pci_dev *) dev), err);
++		return 0;
++	}
++
++	irq = irq_create_of_mapping(dev_irq.controller,
++				    dev_irq.specifier,
++				    dev_irq.size);
++
++	if (irq == 0)
++		pr_crit("pci %s: no irq found for pin %u\n",
++			pci_name((struct pci_dev *) dev), pin);
++	else
++		pr_info("pci %s: using irq %d for pin %u\n",
++			pci_name((struct pci_dev *) dev), irq, pin);
++
++	return irq;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++	return 0;
++}
++
++static const struct of_device_id rt3883_pci_ids[] = {
++	{ .compatible = "ralink,rt3883-pci" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, rt3883_pci_ids);
++
++static struct platform_driver rt3883_pci_driver = {
++	.probe = rt3883_pci_probe,
++	.driver = {
++		.name = "rt3883-pci",
++		.owner = THIS_MODULE,
++		.of_match_table = of_match_ptr(rt3883_pci_ids),
++	},
++};
++
++static int __init rt3883_pci_init(void)
++{
++	return platform_driver_register(&rt3883_pci_driver);
++}
++
++postcore_initcall(rt3883_pci_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index c0ac93a..2fbe93c 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -21,6 +21,7 @@ choice
+ 		bool "RT3883"
+ 		select USB_ARCH_HAS_OHCI
+ 		select USB_ARCH_HAS_EHCI
++		select HW_HAS_PCI
+ 
+ 	config SOC_MT7620
+ 		bool "MT7620"
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0151-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-3.9/0151-PCI-MIPS-adds-mt7620a-pcie-driver.patch
new file mode 100644
index 0000000000..f5be94e793
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0151-PCI-MIPS-adds-mt7620a-pcie-driver.patch
@@ -0,0 +1,409 @@
+From 06276ceb7de13d19c74cff597c5c62fe1f9fb556 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 18 May 2013 22:06:15 +0200
+Subject: [PATCH 151/164] PCI: MIPS: adds mt7620a pcie driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/pci/Makefile      |    1 +
+ arch/mips/pci/pci-mt7620a.c |  363 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/Kconfig    |    1 +
+ 3 files changed, 365 insertions(+)
+ create mode 100644 arch/mips/pci/pci-mt7620a.c
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 3cbfd9b..025d3a7 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -43,6 +43,7 @@ obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
+ obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
++obj-$(CONFIG_SOC_MT7620)	+= pci-mt7620a.o
+ obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
+diff --git a/arch/mips/pci/pci-mt7620a.c b/arch/mips/pci/pci-mt7620a.c
+new file mode 100644
+index 0000000..271763c
+--- /dev/null
++++ b/arch/mips/pci/pci-mt7620a.c
+@@ -0,0 +1,363 @@
++/*
++ *  Ralink MT7620A SoC PCI support
++ *
++ *  Copyright (C) 2007-2013 Bruce Chang
++ *  Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++#include <linux/reset.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RALINK_PCI_MM_MAP_BASE		0x20000000
++#define RALINK_PCI_IO_MAP_BASE		0x10160000
++
++#define RALINK_INT_PCIE0		4
++#define RALINK_SYSTEM_CONTROL_BASE	0xb0000000
++#define RALINK_SYSCFG1			0x14
++#define RALINK_CLKCFG1			0x30
++#define RALINK_GPIOMODE			0x60
++#define RALINK_PCIE_CLK_GEN		0x7c
++#define RALINK_PCIE_CLK_GEN1		0x80
++#define PCIEPHY0_CFG			0x90
++#define PPLL_CFG1			0x9c
++#define PPLL_DRV			0xa0
++#define RALINK_PCI_HOST_MODE_EN		(1<<7)
++#define RALINK_PCIE_RC_MODE_EN		(1<<8)
++#define RALINK_PCIE_RST			(1<<23)
++#define RALINK_PCI_RST			(1<<24)
++#define RALINK_PCI_CLK_EN		(1<<19)
++#define RALINK_PCIE_CLK_EN		(1<<21)
++#define PCI_SLOTx2			(1<<11)
++#define PCI_SLOTx1			(2<<11)
++#define PDRV_SW_SET			(1<<31)
++#define LC_CKDRVPD_			(1<<19)
++
++#define RALINK_PCI_CONFIG_ADDR		0x20
++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG	0x24
++#define MEMORY_BASE			0x0
++#define RALINK_PCIE0_RST		(1<<26)
++#define RALINK_PCI_BASE			0xB0140000
++#define RALINK_PCI_MEMBASE		0x28
++#define RALINK_PCI_IOBASE		0x2C
++
++#define RT6855_PCIE0_OFFSET		0x2000
++
++#define RALINK_PCI_PCICFG_ADDR		0x00
++#define RALINK_PCI0_BAR0SETUP_ADDR	0x10
++#define RALINK_PCI0_IMBASEBAR0_ADDR	0x18
++#define RALINK_PCI0_ID			0x30
++#define RALINK_PCI0_CLASS		0x34
++#define RALINK_PCI0_SUBID		0x38
++#define RALINK_PCI0_STATUS		0x50
++#define RALINK_PCI_PCIMSK_ADDR		0x0C
++
++#define RALINK_PCIE0_CLK_EN		(1 << 26)
++
++#define BUSY				0x80000000
++#define WAITRETRY_MAX			10
++#define WRITE_MODE			(1UL << 23)
++#define DATA_SHIFT			0
++#define ADDR_SHIFT			8
++
++
++static void __iomem *bridge_base;
++static void __iomem *pcie_base;
++
++static struct reset_control *rstpcie0;
++
++static inline void bridge_w32(u32 val, unsigned reg)
++{
++	iowrite32(val, bridge_base + reg);
++}
++
++static inline u32 bridge_r32(unsigned reg)
++{
++	return ioread32(bridge_base + reg);
++}
++
++static inline void pcie_w32(u32 val, unsigned reg)
++{
++	iowrite32(val, pcie_base + reg);
++}
++
++static inline u32 pcie_r32(unsigned reg)
++{
++	return ioread32(pcie_base + reg);
++}
++
++static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
++{
++	u32 val = pcie_r32(reg);
++	val &= ~clr;
++	val |= set;
++	pcie_w32(val, reg);
++}
++
++int wait_pciephy_busy(void)
++{
++	unsigned long reg_value = 0x0, retry = 0;
++
++	while (1) {
++		//reg_value = rareg(READMODE, PCIEPHY0_CFG, 0);
++		reg_value = pcie_r32(PCIEPHY0_CFG);
++
++		if (reg_value & BUSY)
++			mdelay(100);
++		else
++			break;
++		if (retry++ > WAITRETRY_MAX){
++			printk("PCIE-PHY retry failed.\n");
++			return -1;
++		}
++	}
++	return 0;
++}
++
++static void pcie_phy(unsigned long addr, unsigned long val)
++{
++	wait_pciephy_busy();
++	pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG);
++	mdelay(1);
++	wait_pciephy_busy();
++}
++
++static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
++{
++	unsigned int slot = PCI_SLOT(devfn);
++	u8 func = PCI_FUNC(devfn);
++	u32 address;
++	u32 data;
++
++	address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++	bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
++	data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++	switch (size) {
++	case 1:
++		*val = (data >> ((where & 3) << 3)) & 0xff;
++		break;
++	case 2:
++		*val = (data >> ((where & 3) << 3)) & 0xffff;
++		break;
++	case 4:
++		*val = data;
++		break;
++	}
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
++{
++	unsigned int slot = PCI_SLOT(devfn);
++	u8 func = PCI_FUNC(devfn);
++	u32 address;
++	u32 data;
++
++	address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++	bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
++	data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++	switch (size) {
++	case 1:
++		data = (data & ~(0xff << ((where & 3) << 3))) |
++			(val << ((where & 3) << 3));
++		break;
++	case 2:
++		data = (data & ~(0xffff << ((where & 3) << 3))) |
++			(val << ((where & 3) << 3));
++		break;
++	case 4:
++		data = val;
++		break;
++	}
++
++	bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++struct pci_ops mt7620a_pci_ops= {
++	.read	= pci_config_read,
++	.write	= pci_config_write,
++};
++
++static struct resource mt7620a_res_pci_mem1 = {
++	.name	= "pci memory",
++	.start	= RALINK_PCI_MM_MAP_BASE,
++	.end	= (u32) ((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
++	.flags	= IORESOURCE_MEM,
++};
++static struct resource mt7620a_res_pci_io1 = {
++	.name	= "pci io",
++	.start	= RALINK_PCI_IO_MAP_BASE,
++	.end	= (u32) ((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
++	.flags	= IORESOURCE_IO,
++};
++
++struct pci_controller mt7620a_controller = {
++	.pci_ops	= &mt7620a_pci_ops,
++	.mem_resource	= &mt7620a_res_pci_mem1,
++	.io_resource	= &mt7620a_res_pci_io1,
++	.mem_offset	= 0x00000000UL,
++	.io_offset	= 0x00000000UL,
++	.io_map_base	= 0xa0000000,
++};
++
++static int mt7620a_pci_probe(struct platform_device *pdev)
++{
++	struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++	rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
++	if (IS_ERR(rstpcie0))
++		return PTR_ERR(rstpcie0);
++
++	bridge_base = devm_request_and_ioremap(&pdev->dev, bridge_res);
++        if (!bridge_base)
++		return -ENOMEM;
++
++	pcie_base = devm_request_and_ioremap(&pdev->dev, pcie_res);
++        if (!pcie_base)
++		return -ENOMEM;
++
++	iomem_resource.start = 0;
++	iomem_resource.end= ~0;
++	ioport_resource.start= 0;
++	ioport_resource.end = ~0;
++
++	/* PCIE: bypass PCIe DLL */
++	pcie_phy(0x0, 0x80);
++	pcie_phy(0x1, 0x04);
++	/* PCIE: Elastic buffer control */
++	pcie_phy(0x68, 0xB4);
++
++	reset_control_assert(rstpcie0);
++	rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++	rt_sysc_m32(1<<19, 1<<31, PPLL_DRV);
++	rt_sysc_m32(0x3 << 16, 0, RALINK_GPIOMODE);
++
++	reset_control_deassert(rstpcie0);
++	rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
++
++	mdelay(100);
++
++	if (!(rt_sysc_r32(PPLL_CFG1) & 1<<23)) {
++		printk("MT7620 PPLL unlock\n");
++		reset_control_assert(rstpcie0);
++		rt_sysc_m32(BIT(26), 0, RALINK_CLKCFG1);
++		return 0;
++	}
++	rt_sysc_m32((0x1<<18) | (0x1<<17), (0x1 << 19) | (0x1 << 31), PPLL_DRV);
++
++	mdelay(100);
++	reset_control_assert(rstpcie0);
++	rt_sysc_m32(0x30, 2 << 4, RALINK_SYSCFG1);
++
++	rt_sysc_m32(~0x7fffffff, 0x80000000, RALINK_PCIE_CLK_GEN);
++	rt_sysc_m32(~0x80ffffff, 0xa << 24, RALINK_PCIE_CLK_GEN1);
++
++	mdelay(50);
++	reset_control_deassert(rstpcie0);
++	pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR);
++	mdelay(100);
++
++	if (( pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) {
++		reset_control_assert(rstpcie0);
++		rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++		rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV);
++		printk("PCIE0 no card, disable it(RST&CLK)\n");
++	}
++
++	bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
++	bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
++
++	pcie_w32(0x7FFF0000, RALINK_PCI0_BAR0SETUP_ADDR);
++	pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
++	pcie_w32(0x08021814, RALINK_PCI0_ID);
++	pcie_w32(0x06040001, RALINK_PCI0_CLASS);
++	pcie_w32(0x28801814, RALINK_PCI0_SUBID);
++	pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR);
++
++	register_pci_controller(&mt7620a_controller);
++
++	return 0;
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	const struct resource *res;
++	u16 cmd;
++	u32 val;
++	int i, irq = 0;
++
++	if ((dev->bus->number == 0) && (slot == 0)) {
++		pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE
++		pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE);
++		pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
++	} else if ((dev->bus->number == 1) && (slot == 0x0)) {
++		irq = RALINK_INT_PCIE0;
++	} else {
++		printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
++		return 0;
++	}
++
++	for (i = 0; i < 6; i++) {
++		res = &dev->resource[i];
++	}
++
++	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);  //configure cache line size 0x14
++	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF);  //configure latency timer 0x10
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++
++	// FIXME
++	cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
++	pci_write_config_word(dev, PCI_COMMAND, cmd);
++	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
++	//pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq);
++
++	return irq;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++	return 0;
++}
++
++static const struct of_device_id mt7620a_pci_ids[] = {
++	{ .compatible = "ralink,mt7620a-pci" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, mt7620a_pci_ids);
++
++static struct platform_driver mt7620a_pci_driver = {
++	.probe = mt7620a_pci_probe,
++	.driver = {
++		.name = "mt7620a-pci",
++		.owner = THIS_MODULE,
++		.of_match_table = of_match_ptr(mt7620a_pci_ids),
++	},
++};
++
++static int __init mt7620a_pci_init(void)
++{
++	return platform_driver_register(&mt7620a_pci_driver);
++}
++
++arch_initcall(mt7620a_pci_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 2fbe93c..c8d5b6c 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -26,6 +26,7 @@ choice
+ 	config SOC_MT7620
+ 		bool "MT7620"
+ 		select CLKEVT_RT3352
++		select HW_HAS_PCI
+ 
+ endchoice
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0152-watchdog-adds-ralink-wdt.patch b/target/linux/ramips/patches-3.9/0152-watchdog-adds-ralink-wdt.patch
new file mode 100644
index 0000000000..d70d2b28c0
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0152-watchdog-adds-ralink-wdt.patch
@@ -0,0 +1,274 @@
+From 307ae4eb2504dcc9663a0452a42c38669b8ba815 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Apr 2013 23:23:07 +0200
+Subject: [PATCH 152/164] watchdog: adds ralink wdt
+
+Adds the watchdog driver for ralink SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c     |    1 +
+ drivers/watchdog/Kconfig      |    7 ++
+ drivers/watchdog/Makefile     |    1 +
+ drivers/watchdog/rt2880_wdt.c |  208 +++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 217 insertions(+)
+ create mode 100644 drivers/watchdog/rt2880_wdt.c
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 08c96db6..4956d96 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -182,6 +182,7 @@ void __init ralink_clk_init(void)
+ 
+ 	ralink_clk_add("cpu", cpu_rate);
+ 	ralink_clk_add("10000100.timer", 40000000);
++	ralink_clk_add("10000120.watchdog", 40000000);
+ 	ralink_clk_add("10000500.uart", 40000000);
+ 	ralink_clk_add("10000b00.spi", 40000000);
+ 	ralink_clk_add("10000c00.uartlite", 40000000);
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index e89fc31..5e34760 100644
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1104,6 +1104,13 @@ config LANTIQ_WDT
+ 	help
+ 	  Hardware driver for the Lantiq SoC Watchdog Timer.
+ 
++config RALINK_WDT
++	tristate "Ralink SoC watchdog"
++	select WATCHDOG_CORE
++	depends on RALINK
++	help
++	  Hardware driver for the Ralink SoC Watchdog Timer.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
+index a300b94..2681e3d 100644
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -134,6 +134,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+ obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
++obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
+ 
+ # PARISC Architecture
+ 
+diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c
+new file mode 100644
+index 0000000..3df65a4
+--- /dev/null
++++ b/drivers/watchdog/rt2880_wdt.c
+@@ -0,0 +1,207 @@
++/*
++ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
++ *
++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ * This driver was based on: drivers/watchdog/softdog.c
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/clk.h>
++#include <linux/reset.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/watchdog.h>
++#include <linux/miscdevice.h>
++#include <linux/moduleparam.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define SYSC_RSTSTAT			0x38
++#define WDT_RST_CAUSE			BIT(1)
++
++#define RALINK_WDT_TIMEOUT		30
++#define RALINK_WDT_PRESCALE		65536
++
++#define TIMER_REG_TMR1LOAD		0x00
++#define TIMER_REG_TMR1CTL		0x08
++
++#define TMRSTAT_TMR1RST			BIT(5)
++
++#define TMR1CTL_ENABLE			BIT(7)
++#define TMR1CTL_MODE_SHIFT		4
++#define TMR1CTL_MODE_MASK		0x3
++#define TMR1CTL_MODE_FREE_RUNNING	0x0
++#define TMR1CTL_MODE_PERIODIC		0x1
++#define TMR1CTL_MODE_TIMEOUT		0x2
++#define TMR1CTL_MODE_WDT		0x3
++#define TMR1CTL_PRESCALE_MASK		0xf
++#define TMR1CTL_PRESCALE_65536		0xf
++
++static struct clk *rt288x_wdt_clk;
++static unsigned long rt288x_wdt_freq;
++static void __iomem *rt288x_wdt_base;
++
++static bool nowayout = WATCHDOG_NOWAYOUT;
++module_param(nowayout, bool, 0);
++MODULE_PARM_DESC(nowayout,
++		"Watchdog cannot be stopped once started (default="
++		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
++
++static inline void rt_wdt_w32(unsigned reg, u32 val)
++{
++	iowrite32(val, rt288x_wdt_base + reg);
++}
++
++static inline u32 rt_wdt_r32(unsigned reg)
++{
++	return ioread32(rt288x_wdt_base + reg);
++}
++
++static int rt288x_wdt_ping(struct watchdog_device *w)
++{
++        rt_wdt_w32(TIMER_REG_TMR1LOAD, w->timeout * rt288x_wdt_freq);
++
++	return 0;
++}
++
++static int rt288x_wdt_start(struct watchdog_device *w)
++{
++	u32 t;
++
++	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++	t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT |
++		TMR1CTL_PRESCALE_MASK);
++	t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT |
++		TMR1CTL_PRESCALE_65536);
++	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++
++	rt288x_wdt_ping(w);
++
++	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++	t |= TMR1CTL_ENABLE;
++	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++
++	return 0;
++}
++
++static int rt288x_wdt_stop(struct watchdog_device *w)
++{
++	u32 t;
++
++	rt288x_wdt_ping(w);
++
++	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++	t &= ~TMR1CTL_ENABLE;
++	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++
++	return 0;
++}
++
++static int rt288x_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
++{
++	w->timeout = t;
++	rt288x_wdt_ping(w);
++
++	return 0;
++}
++
++static int rt288x_wdt_bootcause(void)
++{
++	if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
++		return WDIOF_CARDRESET;
++
++	return 0;
++}
++
++static struct watchdog_info rt288x_wdt_info = {
++	.identity = "Ralink Watchdog",
++	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
++};
++
++static struct watchdog_ops rt288x_wdt_ops = {
++	.owner = THIS_MODULE,
++	.start = rt288x_wdt_start,
++	.stop = rt288x_wdt_stop,
++	.ping = rt288x_wdt_ping,
++	.set_timeout = rt288x_wdt_set_timeout,
++};
++
++static struct watchdog_device rt288x_wdt_dev = {
++	.info = &rt288x_wdt_info,
++	.ops = &rt288x_wdt_ops,
++	.min_timeout = 1,
++};
++
++static int rt288x_wdt_probe(struct platform_device *pdev)
++{
++	struct resource *res;
++	int ret;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++        rt288x_wdt_base = devm_request_and_ioremap(&pdev->dev, res);
++	if (IS_ERR(rt288x_wdt_base))
++		return PTR_ERR(rt288x_wdt_base);
++
++	rt288x_wdt_clk = devm_clk_get(&pdev->dev, NULL);
++	if (IS_ERR(rt288x_wdt_clk))
++		return PTR_ERR(rt288x_wdt_clk);
++
++	device_reset(&pdev->dev);
++
++	rt288x_wdt_freq = clk_get_rate(rt288x_wdt_clk) / RALINK_WDT_PRESCALE;
++
++	rt288x_wdt_dev.dev = &pdev->dev;
++	rt288x_wdt_dev.bootstatus = rt288x_wdt_bootcause();
++
++	rt288x_wdt_dev.timeout = rt288x_wdt_dev.max_timeout = (0xfffful / rt288x_wdt_freq);
++
++	watchdog_set_nowayout(&rt288x_wdt_dev, nowayout);
++
++	ret = watchdog_register_device(&rt288x_wdt_dev);
++	if (!ret)
++		dev_info(&pdev->dev, "Initialized\n");
++
++	return 0;
++}
++
++static int rt288x_wdt_remove(struct platform_device *pdev)
++{
++	watchdog_unregister_device(&rt288x_wdt_dev);
++
++	return 0;
++}
++
++static void rt288x_wdt_shutdown(struct platform_device *pdev)
++{
++	rt288x_wdt_stop(&rt288x_wdt_dev);
++}
++
++static const struct of_device_id rt288x_wdt_match[] = {
++	{ .compatible = "ralink,rt2880-wdt" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
++
++static struct platform_driver rt288x_wdt_driver = {
++	.probe		= rt288x_wdt_probe,
++	.remove		= rt288x_wdt_remove,
++	.shutdown	= rt288x_wdt_shutdown,
++	.driver		= {
++		.name		= KBUILD_MODNAME,
++		.owner		= THIS_MODULE,
++		.of_match_table	= rt288x_wdt_match,
++	},
++};
++
++module_platform_driver(rt288x_wdt_driver);
++
++MODULE_DESCRIPTION("MediaTek/Ralink RT288x/RT3xxx hardware watchdog driver");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0153-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-3.9/0153-i2c-MIPS-adds-ralink-I2C-driver.patch
new file mode 100644
index 0000000000..42952f1ea9
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0153-i2c-MIPS-adds-ralink-I2C-driver.patch
@@ -0,0 +1,358 @@
+From e5a800fb1dc440ee1e4ca656b2ed3f6e2debecca Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 29 Apr 2013 14:40:43 +0200
+Subject: [PATCH 153/164] i2c: MIPS: adds ralink I2C driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../devicetree/bindings/i2c/i2c-ralink.txt         |   27 ++
+ drivers/i2c/busses/Kconfig                         |    4 +
+ drivers/i2c/busses/Makefile                        |    1 +
+ drivers/i2c/busses/i2c-ralink.c                    |  274 ++++++++++++++++++++
+ 4 files changed, 306 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+ create mode 100644 drivers/i2c/busses/i2c-ralink.c
+
+diff --git a/Documentation/devicetree/bindings/i2c/i2c-ralink.txt b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+new file mode 100644
+index 0000000..8fa8ac3
+--- /dev/null
++++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+@@ -0,0 +1,27 @@
++I2C for Ralink platforms
++
++Required properties :
++- compatible : Must be "link,rt3052-i2c"
++- reg: physical base address of the controller and length of memory mapped
++     region.
++- #address-cells = <1>;
++- #size-cells = <0>;
++
++Optional properties:
++- Child nodes conforming to i2c bus binding
++
++Example :
++
++palmbus@10000000 {
++	i2c@900 {
++		compatible = "link,rt3052-i2c";
++		reg = <0x900 0x100>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		hwmon@4b {
++			compatible = "national,lm92";
++			reg = <0x4b>;
++		};
++	};
++};
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index adfee98..ec925ae 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -628,6 +628,10 @@ config I2C_PXA_SLAVE
+ 	  is necessary for systems where the PXA may be a target on the
+ 	  I2C bus.
+ 
++config I2C_RALINK
++	tristate "Ralink I2C Controller"
++	select OF_I2C
++
+ config HAVE_S3C2410_I2C
+ 	bool
+ 	help
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 8f4fc23..7e39a13 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -62,6 +62,7 @@ obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
+ obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
+ obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
+ obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
++obj-$(CONFIG_I2C_RALINK)	+= i2c-ralink.o
+ obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
+ obj-$(CONFIG_I2C_S6000)		+= i2c-s6000.o
+ obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
+diff --git a/drivers/i2c/busses/i2c-ralink.c b/drivers/i2c/busses/i2c-ralink.c
+new file mode 100644
+index 0000000..b5abf0f
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-ralink.c
+@@ -0,0 +1,274 @@
++/*
++ * drivers/i2c/busses/i2c-ralink.c
++ *
++ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <linux/io.h>
++#include <linux/of_i2c.h>
++#include <linux/err.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define REG_CONFIG_REG		0x00
++#define REG_CLKDIV_REG		0x04
++#define REG_DEVADDR_REG		0x08
++#define REG_ADDR_REG		0x0C
++#define REG_DATAOUT_REG		0x10
++#define REG_DATAIN_REG		0x14
++#define REG_STATUS_REG		0x18
++#define REG_STARTXFR_REG	0x1C
++#define REG_BYTECNT_REG		0x20
++
++#define I2C_STARTERR		BIT(4)
++#define I2C_ACKERR		BIT(3)
++#define I2C_DATARDY		BIT(2)
++#define I2C_SDOEMPTY		BIT(1)
++#define I2C_BUSY		BIT(0)
++
++#define I2C_DEVADLEN_7		(6 << 2)
++#define I2C_ADDRDIS		BIT(1)
++
++#define I2C_RETRY		0x400
++
++#define CLKDIV_VALUE		600
++
++#define READ_CMD		0x01
++#define WRITE_CMD		0x00
++#define READ_BLOCK              64
++
++static void __iomem *membase;
++static struct i2c_adapter *adapter;
++
++static void rt_i2c_w32(u32 val, unsigned reg)
++{
++	iowrite32(val, membase + reg);
++}
++
++static u32 rt_i2c_r32(unsigned reg)
++{
++	return ioread32(membase + reg);
++}
++
++static inline int rt_i2c_wait_rx_done(void)
++{
++	int retries = I2C_RETRY;
++
++	do {
++		if (!retries--)
++			break;
++	} while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY));
++
++	return (retries < 0);
++}
++
++static inline int rt_i2c_wait_idle(void)
++{
++	int retries = I2C_RETRY;
++
++	do {
++		if (!retries--)
++			break;
++	} while(rt_i2c_r32(REG_STATUS_REG) & I2C_BUSY);
++
++	return (retries < 0);
++}
++
++static inline int rt_i2c_wait_tx_done(void)
++{
++	int retries = I2C_RETRY;
++
++	do {
++		if (!retries--)
++			break;
++	} while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY));
++
++	return (retries < 0);
++}
++
++static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg)
++{
++	int i = 0, j = 0, pos = 0;
++	int nblock = msg->len / READ_BLOCK;
++        int rem = msg->len % READ_BLOCK;
++
++	if (msg->flags & I2C_M_TEN) {
++		printk("10 bits addr not supported\n");
++		return -EINVAL;
++	}
++
++	if (msg->flags & I2C_M_RD) {
++		for (i = 0; i < nblock; i++) {
++			rt_i2c_wait_idle();
++			rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG);
++			rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
++			for (j = 0; j < READ_BLOCK; j++) {
++				if (rt_i2c_wait_rx_done())
++					return -1;
++				msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
++			}
++		}
++
++		rt_i2c_wait_idle();
++		rt_i2c_w32(rem - 1, REG_BYTECNT_REG);
++		rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
++		for (i = 0; i < rem; i++) {
++			if (rt_i2c_wait_rx_done())
++				return -1;
++			msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
++		}
++	} else {
++		rt_i2c_wait_idle();
++		rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG);
++		rt_i2c_w32(msg->buf[0], REG_DATAOUT_REG);
++		rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG);
++		for (i = 1; i < msg->len; i++) {
++			rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG);
++			if (rt_i2c_wait_tx_done())
++				return -1;
++		}
++	}
++
++	return msg->len;
++}
++
++static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n)
++{
++	int i = 0;
++	int ret = 0;
++
++	if (rt_i2c_wait_idle()) {
++		printk("i2c transfer failed\n");
++		return 0;
++	}
++
++	device_reset(a->dev.parent);
++
++	rt_i2c_w32(m->addr, REG_DEVADDR_REG);
++	rt_i2c_w32(I2C_DEVADLEN_7 | I2C_ADDRDIS, REG_CONFIG_REG);
++	rt_i2c_w32(CLKDIV_VALUE, REG_CLKDIV_REG);
++
++	for (i = 0; i < n && !ret; i++)
++		ret = rt_i2c_handle_msg(a, &m[i]);
++
++	if (ret) {
++		printk("i2c transfer failed\n");
++		return 0;
++	}
++
++	return n;
++}
++
++static u32 rt_i2c_func(struct i2c_adapter *a)
++{
++	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++static const struct i2c_algorithm rt_i2c_algo = {
++	.master_xfer	= rt_i2c_master_xfer,
++	.functionality	= rt_i2c_func,
++};
++
++static int rt_i2c_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	int ret;
++
++	if (!res) {
++		dev_err(&pdev->dev, "no memory resource found\n");
++		return -ENODEV;
++	}
++
++	adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
++	if (!adapter) {
++		dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
++		return -ENOMEM;
++	}
++
++	membase = devm_request_and_ioremap(&pdev->dev, res);
++	if (IS_ERR(membase))
++		return PTR_ERR(membase);
++
++	strlcpy(adapter->name, dev_name(&pdev->dev), sizeof(adapter->name));
++	adapter->owner = THIS_MODULE;
++	adapter->nr = pdev->id;
++	adapter->timeout = HZ;
++	adapter->algo = &rt_i2c_algo;
++	adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++	adapter->dev.parent = &pdev->dev;
++	adapter->dev.of_node = pdev->dev.of_node;
++
++	ret = i2c_add_numbered_adapter(adapter);
++	if (ret)
++		return ret;
++
++	of_i2c_register_devices(adapter);
++
++	platform_set_drvdata(pdev, adapter);
++
++	dev_info(&pdev->dev, "loaded\n");
++
++	return 0;
++}
++
++static int rt_i2c_remove(struct platform_device *pdev)
++{
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static const struct of_device_id i2c_rt_dt_ids[] = {
++	{ .compatible = "ralink,rt2880-i2c", },
++	{ /* sentinel */ }
++};
++
++MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
++
++static struct platform_driver rt_i2c_driver = {
++	.probe		= rt_i2c_probe,
++	.remove		= rt_i2c_remove,
++	.driver		= {
++		.owner	= THIS_MODULE,
++		.name	= "i2c-ralink",
++		.of_match_table = i2c_rt_dt_ids,
++	},
++};
++
++static int __init i2c_rt_init (void)
++{
++	return platform_driver_register(&rt_i2c_driver);
++}
++subsys_initcall(i2c_rt_init);
++
++static void __exit i2c_rt_exit (void)
++{
++	platform_driver_unregister(&rt_i2c_driver);
++}
++
++module_exit (i2c_rt_exit);
++
++MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
++MODULE_DESCRIPTION("Ralink I2c host driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:Ralink-I2C");
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0154-reset-Add-reset-controller-API.patch b/target/linux/ramips/patches-3.9/0154-reset-Add-reset-controller-API.patch
new file mode 100644
index 0000000000..900f0a2e46
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0154-reset-Add-reset-controller-API.patch
@@ -0,0 +1,554 @@
+From d6cfbdfa001891894efe078a49ad82ac8a932dbb Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 20 May 2013 15:42:01 +0200
+Subject: [PATCH 154/164] reset: Add reset controller API
+
+backport from v3.10-rc1
+61fc41317666be400802ac793f47de816ef7bd57
+6034bb22d8387708075c083385e5d2e1072a4f33
+4e11f848c65b1c87782cb232a6e3b47a9d4c1f98
+
+This adds a simple API for devices to request being reset
+by separate reset controller hardware and implements the
+reset signal device tree binding.
+
+Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
+Reviewed-by: Stephen Warren <swarren@nvidia.com>
+Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
+Reviewed-by: Marek Vasut <marex@denx.de>
+Reviewed-by: Pavel Machek <pavel@ucw.cz>
+---
+ Documentation/devicetree/bindings/reset/reset.txt |   75 ++++++
+ drivers/Kconfig                                   |    2 +
+ drivers/Makefile                                  |    3 +
+ drivers/reset/Kconfig                             |   13 +
+ drivers/reset/Makefile                            |    1 +
+ drivers/reset/core.c                              |  297 +++++++++++++++++++++
+ include/linux/reset-controller.h                  |   51 ++++
+ include/linux/reset.h                             |   17 ++
+ 8 files changed, 459 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/reset/reset.txt
+ create mode 100644 drivers/reset/Kconfig
+ create mode 100644 drivers/reset/Makefile
+ create mode 100644 drivers/reset/core.c
+ create mode 100644 include/linux/reset-controller.h
+ create mode 100644 include/linux/reset.h
+
+diff --git a/Documentation/devicetree/bindings/reset/reset.txt b/Documentation/devicetree/bindings/reset/reset.txt
+new file mode 100644
+index 0000000..31db6ff
+--- /dev/null
++++ b/Documentation/devicetree/bindings/reset/reset.txt
+@@ -0,0 +1,75 @@
++= Reset Signal Device Tree Bindings =
++
++This binding is intended to represent the hardware reset signals present
++internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole
++standalone chips are most likely better represented as GPIOs, although there
++are likely to be exceptions to this rule.
++
++Hardware blocks typically receive a reset signal. This signal is generated by
++a reset provider (e.g. power management or clock module) and received by a
++reset consumer (the module being reset, or a module managing when a sub-
++ordinate module is reset). This binding exists to represent the provider and
++consumer, and provide a way to couple the two together.
++
++A reset signal is represented by the phandle of the provider, plus a reset
++specifier - a list of DT cells that represents the reset signal within the
++provider. The length (number of cells) and semantics of the reset specifier
++are dictated by the binding of the reset provider, although common schemes
++are described below.
++
++A word on where to place reset signal consumers in device tree: It is possible
++in hardware for a reset signal to affect multiple logically separate HW blocks
++at once. In this case, it would be unwise to represent this reset signal in
++the DT node of each affected HW block, since if activated, an unrelated block
++may be reset. Instead, reset signals should be represented in the DT node
++where it makes most sense to control it; this may be a bus node if all
++children of the bus are affected by the reset signal, or an individual HW
++block node for dedicated reset signals. The intent of this binding is to give
++appropriate software access to the reset signals in order to manage the HW,
++rather than to slavishly enumerate the reset signal that affects each HW
++block.
++
++= Reset providers =
++
++Required properties:
++#reset-cells:	Number of cells in a reset specifier; Typically 0 for nodes
++		with a single reset output and 1 for nodes with multiple
++		reset outputs.
++
++For example:
++
++	rst: reset-controller {
++		#reset-cells = <1>;
++	};
++
++= Reset consumers =
++
++Required properties:
++resets:		List of phandle and reset specifier pairs, one pair
++		for each reset signal that affects the device, or that the
++		device manages. Note: if the reset provider specifies '0' for
++		#reset-cells, then only the phandle portion of the pair will
++		appear.
++
++Optional properties:
++reset-names:	List of reset signal name strings sorted in the same order as
++		the resets property. Consumers drivers will use reset-names to
++		match reset signal names with reset specifiers.
++
++For example:
++
++	device {
++		resets = <&rst 20>;
++		reset-names = "reset";
++	};
++
++This represents a device with a single reset signal named "reset".
++
++	bus {
++		resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>;
++		reset-names = "i2s1", "i2s2", "dma", "mixer";
++	};
++
++This represents a bus that controls the reset signal of each of four sub-
++ordinate devices. Consider for example a bus that fails to operate unless no
++child device has reset asserted.
+diff --git a/drivers/Kconfig b/drivers/Kconfig
+index 202fa6d..847f8e3 100644
+--- a/drivers/Kconfig
++++ b/drivers/Kconfig
+@@ -162,4 +162,6 @@ source "drivers/irqchip/Kconfig"
+ 
+ source "drivers/ipack/Kconfig"
+ 
++source "drivers/reset/Kconfig"
++
+ endmenu
+diff --git a/drivers/Makefile b/drivers/Makefile
+index dce39a9..1a64c4c 100644
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -37,6 +37,9 @@ obj-$(CONFIG_XEN)		+= xen/
+ # regulators early, since some subsystems rely on them to initialize
+ obj-$(CONFIG_REGULATOR)		+= regulator/
+ 
++# reset controllers early, since gpu drivers might rely on them to initialize
++obj-$(CONFIG_RESET_CONTROLLER)	+= reset/
++
+ # tty/ comes before char/ so that the VT console is the boot-time
+ # default.
+ obj-y				+= tty/
+diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
+new file mode 100644
+index 0000000..c9d04f7
+--- /dev/null
++++ b/drivers/reset/Kconfig
+@@ -0,0 +1,13 @@
++config ARCH_HAS_RESET_CONTROLLER
++	bool
++
++menuconfig RESET_CONTROLLER
++	bool "Reset Controller Support"
++	default y if ARCH_HAS_RESET_CONTROLLER
++	help
++	  Generic Reset Controller support.
++
++	  This framework is designed to abstract reset handling of devices
++	  via GPIOs or SoC-internal reset controller modules.
++
++	  If unsure, say no.
+diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
+new file mode 100644
+index 0000000..1e2d83f
+--- /dev/null
++++ b/drivers/reset/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_RESET_CONTROLLER) += core.o
+diff --git a/drivers/reset/core.c b/drivers/reset/core.c
+new file mode 100644
+index 0000000..d1b6089
+--- /dev/null
++++ b/drivers/reset/core.c
+@@ -0,0 +1,297 @@
++/*
++ * Reset Controller framework
++ *
++ * Copyright 2013 Philipp Zabel, Pengutronix
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#include <linux/device.h>
++#include <linux/err.h>
++#include <linux/export.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/reset.h>
++#include <linux/reset-controller.h>
++#include <linux/slab.h>
++
++static DEFINE_MUTEX(reset_controller_list_mutex);
++static LIST_HEAD(reset_controller_list);
++
++/**
++ * struct reset_control - a reset control
++ * @rcdev: a pointer to the reset controller device
++ *         this reset control belongs to
++ * @id: ID of the reset controller in the reset
++ *      controller device
++ */
++struct reset_control {
++	struct reset_controller_dev *rcdev;
++	struct device *dev;
++	unsigned int id;
++};
++
++/**
++ * of_reset_simple_xlate - translate reset_spec to the reset line number
++ * @rcdev: a pointer to the reset controller device
++ * @reset_spec: reset line specifier as found in the device tree
++ * @flags: a flags pointer to fill in (optional)
++ *
++ * This simple translation function should be used for reset controllers
++ * with 1:1 mapping, where reset lines can be indexed by number without gaps.
++ */
++int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
++			  const struct of_phandle_args *reset_spec)
++{
++	if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
++		return -EINVAL;
++
++	if (reset_spec->args[0] >= rcdev->nr_resets)
++		return -EINVAL;
++
++	return reset_spec->args[0];
++}
++EXPORT_SYMBOL_GPL(of_reset_simple_xlate);
++
++/**
++ * reset_controller_register - register a reset controller device
++ * @rcdev: a pointer to the initialized reset controller device
++ */
++int reset_controller_register(struct reset_controller_dev *rcdev)
++{
++	if (!rcdev->of_xlate) {
++		rcdev->of_reset_n_cells = 1;
++		rcdev->of_xlate = of_reset_simple_xlate;
++	}
++
++	mutex_lock(&reset_controller_list_mutex);
++	list_add(&rcdev->list, &reset_controller_list);
++	mutex_unlock(&reset_controller_list_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(reset_controller_register);
++
++/**
++ * reset_controller_unregister - unregister a reset controller device
++ * @rcdev: a pointer to the reset controller device
++ */
++void reset_controller_unregister(struct reset_controller_dev *rcdev)
++{
++	mutex_lock(&reset_controller_list_mutex);
++	list_del(&rcdev->list);
++	mutex_unlock(&reset_controller_list_mutex);
++}
++EXPORT_SYMBOL_GPL(reset_controller_unregister);
++
++/**
++ * reset_control_reset - reset the controlled device
++ * @rstc: reset controller
++ */
++int reset_control_reset(struct reset_control *rstc)
++{
++	if (rstc->rcdev->ops->reset)
++		return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id);
++
++	return -ENOSYS;
++}
++EXPORT_SYMBOL_GPL(reset_control_reset);
++
++/**
++ * reset_control_assert - asserts the reset line
++ * @rstc: reset controller
++ */
++int reset_control_assert(struct reset_control *rstc)
++{
++	if (rstc->rcdev->ops->assert)
++		return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id);
++
++	return -ENOSYS;
++}
++EXPORT_SYMBOL_GPL(reset_control_assert);
++
++/**
++ * reset_control_deassert - deasserts the reset line
++ * @rstc: reset controller
++ */
++int reset_control_deassert(struct reset_control *rstc)
++{
++	if (rstc->rcdev->ops->deassert)
++		return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id);
++
++	return -ENOSYS;
++}
++EXPORT_SYMBOL_GPL(reset_control_deassert);
++
++/**
++ * reset_control_get - Lookup and obtain a reference to a reset controller.
++ * @dev: device to be reset by the controller
++ * @id: reset line name
++ *
++ * Returns a struct reset_control or IS_ERR() condition containing errno.
++ *
++ * Use of id names is optional.
++ */
++struct reset_control *reset_control_get(struct device *dev, const char *id)
++{
++	struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
++	struct reset_controller_dev *r, *rcdev;
++	struct of_phandle_args args;
++	int index = 0;
++	int rstc_id;
++	int ret;
++
++	if (!dev)
++		return ERR_PTR(-EINVAL);
++
++	if (id)
++		index = of_property_match_string(dev->of_node,
++						 "reset-names", id);
++	ret = of_parse_phandle_with_args(dev->of_node, "resets", "#reset-cells",
++					 index, &args);
++	if (ret)
++		return ERR_PTR(ret);
++
++	mutex_lock(&reset_controller_list_mutex);
++	rcdev = NULL;
++	list_for_each_entry(r, &reset_controller_list, list) {
++		if (args.np == r->of_node) {
++			rcdev = r;
++			break;
++		}
++	}
++	of_node_put(args.np);
++
++	if (!rcdev) {
++		mutex_unlock(&reset_controller_list_mutex);
++		return ERR_PTR(-ENODEV);
++	}
++
++	rstc_id = rcdev->of_xlate(rcdev, &args);
++	if (rstc_id < 0) {
++		mutex_unlock(&reset_controller_list_mutex);
++		return ERR_PTR(rstc_id);
++	}
++
++	try_module_get(rcdev->owner);
++	mutex_unlock(&reset_controller_list_mutex);
++
++	rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
++	if (!rstc) {
++		module_put(rcdev->owner);
++		return ERR_PTR(-ENOMEM);
++	}
++
++	rstc->dev = dev;
++	rstc->rcdev = rcdev;
++	rstc->id = rstc_id;
++
++	return rstc;
++}
++EXPORT_SYMBOL_GPL(reset_control_get);
++
++/**
++ * reset_control_put - free the reset controller
++ * @rstc: reset controller
++ */
++
++void reset_control_put(struct reset_control *rstc)
++{
++	if (IS_ERR(rstc))
++		return;
++
++	module_put(rstc->rcdev->owner);
++	kfree(rstc);
++}
++EXPORT_SYMBOL_GPL(reset_control_put);
++
++static void devm_reset_control_release(struct device *dev, void *res)
++{
++	reset_control_put(*(struct reset_control **)res);
++}
++
++/**
++ * devm_reset_control_get - resource managed reset_control_get()
++ * @dev: device to be reset by the controller
++ * @id: reset line name
++ *
++ * Managed reset_control_get(). For reset controllers returned from this
++ * function, reset_control_put() is called automatically on driver detach.
++ * See reset_control_get() for more information.
++ */
++struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
++{
++	struct reset_control **ptr, *rstc;
++
++	ptr = devres_alloc(devm_reset_control_release, sizeof(*ptr),
++			   GFP_KERNEL);
++	if (!ptr)
++		return ERR_PTR(-ENOMEM);
++
++	rstc = reset_control_get(dev, id);
++	if (!IS_ERR(rstc)) {
++		*ptr = rstc;
++		devres_add(dev, ptr);
++	} else {
++		devres_free(ptr);
++	}
++
++	return rstc;
++}
++EXPORT_SYMBOL_GPL(devm_reset_control_get);
++
++static int devm_reset_control_match(struct device *dev, void *res, void *data)
++{
++	struct reset_control **rstc = res;
++	if (WARN_ON(!rstc || !*rstc))
++		return 0;
++	return *rstc == data;
++}
++
++/**
++ * devm_reset_control_put - resource managed reset_control_put()
++ * @rstc: reset controller to free
++ *
++ * Deallocate a reset control allocated withd devm_reset_control_get().
++ * This function will not need to be called normally, as devres will take
++ * care of freeing the resource.
++ */
++void devm_reset_control_put(struct reset_control *rstc)
++{
++	int ret;
++
++	ret = devres_release(rstc->dev, devm_reset_control_release,
++			     devm_reset_control_match, rstc);
++	if (ret)
++		WARN_ON(ret);
++}
++EXPORT_SYMBOL_GPL(devm_reset_control_put);
++
++/**
++ * device_reset - find reset controller associated with the device
++ *                and perform reset
++ * @dev: device to be reset by the controller
++ *
++ * Convenience wrapper for reset_control_get() and reset_control_reset().
++ * This is useful for the common case of devices with single, dedicated reset
++ * lines.
++ */
++int device_reset(struct device *dev)
++{
++	struct reset_control *rstc;
++	int ret;
++
++	rstc = reset_control_get(dev, NULL);
++	if (IS_ERR(rstc))
++		return PTR_ERR(rstc);
++
++	ret = reset_control_reset(rstc);
++
++	reset_control_put(rstc);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(device_reset);
+diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
+new file mode 100644
+index 0000000..2f61311
+--- /dev/null
++++ b/include/linux/reset-controller.h
+@@ -0,0 +1,51 @@
++#ifndef _LINUX_RESET_CONTROLLER_H_
++#define _LINUX_RESET_CONTROLLER_H_
++
++#include <linux/list.h>
++
++struct reset_controller_dev;
++
++/**
++ * struct reset_control_ops
++ *
++ * @reset: for self-deasserting resets, does all necessary
++ *         things to reset the device
++ * @assert: manually assert the reset line, if supported
++ * @deassert: manually deassert the reset line, if supported
++ */
++struct reset_control_ops {
++	int (*reset)(struct reset_controller_dev *rcdev, unsigned long id);
++	int (*assert)(struct reset_controller_dev *rcdev, unsigned long id);
++	int (*deassert)(struct reset_controller_dev *rcdev, unsigned long id);
++};
++
++struct module;
++struct device_node;
++
++/**
++ * struct reset_controller_dev - reset controller entity that might
++ *                               provide multiple reset controls
++ * @ops: a pointer to device specific struct reset_control_ops
++ * @owner: kernel module of the reset controller driver
++ * @list: internal list of reset controller devices
++ * @of_node: corresponding device tree node as phandle target
++ * @of_reset_n_cells: number of cells in reset line specifiers
++ * @of_xlate: translation function to translate from specifier as found in the
++ *            device tree to id as given to the reset control ops
++ * @nr_resets: number of reset controls in this reset controller device
++ */
++struct reset_controller_dev {
++	struct reset_control_ops *ops;
++	struct module *owner;
++	struct list_head list;
++	struct device_node *of_node;
++	int of_reset_n_cells;
++	int (*of_xlate)(struct reset_controller_dev *rcdev,
++			const struct of_phandle_args *reset_spec);
++	unsigned int nr_resets;
++};
++
++int reset_controller_register(struct reset_controller_dev *rcdev);
++void reset_controller_unregister(struct reset_controller_dev *rcdev);
++
++#endif
+diff --git a/include/linux/reset.h b/include/linux/reset.h
+new file mode 100644
+index 0000000..6082247
+--- /dev/null
++++ b/include/linux/reset.h
+@@ -0,0 +1,17 @@
++#ifndef _LINUX_RESET_H_
++#define _LINUX_RESET_H_
++
++struct device;
++struct reset_control;
++
++int reset_control_reset(struct reset_control *rstc);
++int reset_control_assert(struct reset_control *rstc);
++int reset_control_deassert(struct reset_control *rstc);
++
++struct reset_control *reset_control_get(struct device *dev, const char *id);
++void reset_control_put(struct reset_control *rstc);
++struct reset_control *devm_reset_control_get(struct device *dev, const char *id);
++
++int device_reset(struct device *dev);
++
++#endif
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0155-reset-MIPS-ralink-add-core-device-reset-wrapper.patch b/target/linux/ramips/patches-3.9/0155-reset-MIPS-ralink-add-core-device-reset-wrapper.patch
new file mode 100644
index 0000000000..a22cfc8020
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0155-reset-MIPS-ralink-add-core-device-reset-wrapper.patch
@@ -0,0 +1,135 @@
+From 4bec674c9f3f0bc137cf5aa4d2cb01e9f8027b3d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 8 May 2013 22:08:39 +0200
+Subject: [PATCH 155/164] reset: MIPS: ralink: add core/device reset wrapper
+
+Add a helper for reseting different devices ont he SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/Kconfig        |    1 +
+ arch/mips/ralink/of.c    |   59 ++++++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/reset.c |    1 +
+ 3 files changed, 61 insertions(+)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index b237c50..cfc7153 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -444,6 +444,7 @@ config RALINK
+ 	select HAVE_MACH_CLKDEV
+ 	select CLKDEV_LOOKUP
+ 	select ARCH_REQUIRE_GPIOLIB
++	select ARCH_HAS_RESET_CONTROLLER
+ 
+ config SGI_IP22
+ 	bool "SGI IP22 (Indy/Indigo2)"
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index 8efb02b..2faf478 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -14,16 +14,22 @@
+ #include <linux/sizes.h>
+ #include <linux/of_fdt.h>
+ #include <linux/kernel.h>
++#include <linux/module.h>
+ #include <linux/bootmem.h>
+ #include <linux/of_platform.h>
+ #include <linux/of_address.h>
++#include <linux/reset-controller.h>
+ 
+ #include <asm/reboot.h>
+ #include <asm/bootinfo.h>
+ #include <asm/addrspace.h>
+ 
++#include <asm/mach-ralink/ralink_regs.h>
++
+ #include "common.h"
+ 
++#define SYSC_REG_RESET_CTRL     0x034
++
+ __iomem void *rt_sysc_membase;
+ __iomem void *rt_memc_membase;
+ 
+@@ -96,6 +102,53 @@ void __init plat_mem_setup(void)
+ 				     soc_info.mem_size_max * SZ_1M);
+ }
+ 
++static int ralink_assert_device(struct reset_controller_dev *rcdev, unsigned long id)
++{
++	u32 val;
++
++	if (id < 8)
++		return -1;
++
++	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
++	val |= BIT(id);
++	rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
++
++	return 0;
++}
++
++static int ralink_deassert_device(struct reset_controller_dev *rcdev, unsigned long id)
++{
++	u32 val;
++
++	if (id < 8)
++		return -1;
++
++	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
++	val &= ~BIT(id);
++	rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
++
++	return 0;
++}
++
++static int ralink_reset_device(struct reset_controller_dev *rcdev, unsigned long id)
++{
++	ralink_assert_device(rcdev, id);
++	return ralink_deassert_device(rcdev, id);
++}
++
++static struct reset_control_ops reset_ops = {
++	.reset = ralink_reset_device,
++	.assert = ralink_assert_device,
++	.deassert = ralink_deassert_device,
++};
++
++static struct reset_controller_dev reset_dev = {
++	.ops			= &reset_ops,
++	.owner			= THIS_MODULE,
++	.nr_resets		= 32,
++	.of_reset_n_cells	= 1,
++};
++
+ static int __init plat_of_setup(void)
+ {
+ 	static struct of_device_id of_ids[3];
+@@ -110,6 +163,12 @@ static int __init plat_of_setup(void)
+ 	if (of_platform_populate(NULL, of_ids, NULL, NULL))
+ 		panic("failed to populate DT\n");
+ 
++	reset_dev.of_node = of_find_compatible_node(NULL, NULL, "ralink,rt2880-reset");
++	if (!reset_dev.of_node)
++		panic("Failed to find reset controller node");
++
++	reset_controller_register(&reset_dev);
++
+ 	ralink_pinmux();
+ 
+ 	return 0;
+diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
+index 22120e5..6c15f4f 100644
+--- a/arch/mips/ralink/reset.c
++++ b/arch/mips/ralink/reset.c
+@@ -10,6 +10,7 @@
+ 
+ #include <linux/pm.h>
+ #include <linux/io.h>
++#include <linux/module.h>
+ 
+ #include <asm/reboot.h>
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0156-NET-add-of_get_mac_address_mtd.patch b/target/linux/ramips/patches-3.9/0156-NET-add-of_get_mac_address_mtd.patch
new file mode 100644
index 0000000000..b790e6b21c
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0156-NET-add-of_get_mac_address_mtd.patch
@@ -0,0 +1,83 @@
+From 14b015461adfb540ee46baf432691cc9eda6c046 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 17 Mar 2013 09:29:15 +0100
+Subject: [PATCH 156/164] NET: add of_get_mac_address_mtd()
+
+Many embedded devices have information such as mac addresses stored inside mtd
+devices. This patch allows us to add a property inside a node describing a
+network interface. The new property points at a mtd partition with an offset
+where the mac address can be found.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/of/of_net.c    |   37 +++++++++++++++++++++++++++++++++++++
+ include/linux/of_net.h |    1 +
+ 2 files changed, 38 insertions(+)
+
+diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
+index ffab033..15f4a71 100644
+--- a/drivers/of/of_net.c
++++ b/drivers/of/of_net.c
+@@ -10,6 +10,7 @@
+ #include <linux/of_net.h>
+ #include <linux/phy.h>
+ #include <linux/export.h>
++#include <linux/mtd/mtd.h>
+ 
+ /**
+  * It maps 'enum phy_interface_t' found in include/linux/phy.h
+@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct device_node *np)
+ 	return NULL;
+ }
+ EXPORT_SYMBOL(of_get_mac_address);
++
++int of_get_mac_address_mtd(struct device_node *np, void *mac)
++{
++	struct device_node *mtd_np = NULL;
++	size_t retlen;
++	int size, ret;
++	struct mtd_info *mtd;
++	const char *part;
++	const __be32 *list;
++	phandle phandle;
++
++	list = of_get_property(np, "mtd-mac-address", &size);
++	if (!list || (size != (2 * sizeof(*list))))
++		return -ENOENT;
++
++	phandle = be32_to_cpup(list++);
++	if (phandle)
++		mtd_np = of_find_node_by_phandle(phandle);
++
++	if (!mtd_np)
++		return -ENOENT;
++
++	part = of_get_property(mtd_np, "label", NULL);
++	if (!part)
++		part = mtd_np->name;
++
++	mtd = get_mtd_device_nm(part);
++	if (IS_ERR(mtd))
++		return PTR_ERR(mtd);
++
++	ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, (u_char *) mac);
++	put_mtd_device(mtd);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
+diff --git a/include/linux/of_net.h b/include/linux/of_net.h
+index f474641..9d3304f 100644
+--- a/include/linux/of_net.h
++++ b/include/linux/of_net.h
+@@ -11,6 +11,7 @@
+ #include <linux/of.h>
+ extern const int of_get_phy_mode(struct device_node *np);
+ extern const void *of_get_mac_address(struct device_node *np);
++extern int of_get_mac_address_mtd(struct device_node *np, void *mac);
+ #endif
+ 
+ #endif /* __LINUX_OF_NET_H */
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0157-NET-multi-phy-support.patch b/target/linux/ramips/patches-3.9/0157-NET-multi-phy-support.patch
new file mode 100644
index 0000000000..62133ef014
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0157-NET-multi-phy-support.patch
@@ -0,0 +1,61 @@
+From 611c89720d9992d54da93bd946000c574d23f2b7 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 11 May 2013 23:40:19 +0200
+Subject: [PATCH 157/164] NET: multi phy support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/phy/phy.c |    9 ++++++---
+ include/linux/phy.h   |    2 +-
+ 2 files changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
+index ef9ea92..27f9b45 100644
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -800,7 +800,8 @@ void phy_state_machine(struct work_struct *work)
+ 			 * negotiation for now */
+ 			if (!phydev->link) {
+ 				phydev->state = PHY_NOLINK;
+-				netif_carrier_off(phydev->attached_dev);
++				if (!phydev->no_auto_carrier_off)
++					netif_carrier_off(phydev->attached_dev);
+ 				phydev->adjust_link(phydev->attached_dev);
+ 				break;
+ 			}
+@@ -891,7 +892,8 @@ void phy_state_machine(struct work_struct *work)
+ 				netif_carrier_on(phydev->attached_dev);
+ 			} else {
+ 				phydev->state = PHY_NOLINK;
+-				netif_carrier_off(phydev->attached_dev);
++				if (!phydev->no_auto_carrier_off)
++					netif_carrier_off(phydev->attached_dev);
+ 			}
+ 
+ 			phydev->adjust_link(phydev->attached_dev);
+@@ -903,7 +905,8 @@ void phy_state_machine(struct work_struct *work)
+ 		case PHY_HALTED:
+ 			if (phydev->link) {
+ 				phydev->link = 0;
+-				netif_carrier_off(phydev->attached_dev);
++				if (!phydev->no_auto_carrier_off)
++					netif_carrier_off(phydev->attached_dev);
+ 				phydev->adjust_link(phydev->attached_dev);
+ 			}
+ 			break;
+diff --git a/include/linux/phy.h b/include/linux/phy.h
+index 33999ad..9c54bc9 100644
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -298,7 +298,7 @@ struct phy_device {
+ 
+ 	struct phy_c45_device_ids c45_ids;
+ 	bool is_c45;
+-
++	bool no_auto_carrier_off;
+ 	enum phy_state state;
+ 
+ 	u32 dev_flags;
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0159-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-3.9/0159-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
new file mode 100644
index 0000000000..4f894e8953
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0159-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
@@ -0,0 +1,4732 @@
+From 12ea1efe1496e936d1cecc4de97ee55321aceee9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Apr 2013 23:20:03 +0200
+Subject: [PATCH 159/164] NET: MIPS: add ralink SoC ethernet driver
+
+Add support for Ralink FE and ESW.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../include/asm/mach-ralink/rt305x_esw_platform.h  |   27 +
+ arch/mips/ralink/rt305x.c                          |    1 +
+ drivers/net/ethernet/Kconfig                       |    1 +
+ drivers/net/ethernet/Makefile                      |    1 +
+ drivers/net/ethernet/ralink/Kconfig                |   31 +
+ drivers/net/ethernet/ralink/Makefile               |   18 +
+ drivers/net/ethernet/ralink/esw_rt3052.c           | 1463 ++++++++++++++++++++
+ drivers/net/ethernet/ralink/esw_rt3052.h           |   32 +
+ drivers/net/ethernet/ralink/gsw_mt7620a.c          | 1027 ++++++++++++++
+ drivers/net/ethernet/ralink/gsw_mt7620a.h          |   29 +
+ drivers/net/ethernet/ralink/mdio.c                 |  245 ++++
+ drivers/net/ethernet/ralink/mdio.h                 |   29 +
+ drivers/net/ethernet/ralink/mdio_rt2880.c          |  163 +++
+ drivers/net/ethernet/ralink/mdio_rt2880.h          |   25 +
+ drivers/net/ethernet/ralink/ralink_soc_eth.c       |  759 ++++++++++
+ drivers/net/ethernet/ralink/ralink_soc_eth.h       |  372 +++++
+ drivers/net/ethernet/ralink/soc_mt7620.c           |  111 ++
+ drivers/net/ethernet/ralink/soc_rt2880.c           |   51 +
+ drivers/net/ethernet/ralink/soc_rt305x.c           |  102 ++
+ drivers/net/ethernet/ralink/soc_rt3883.c           |   59 +
+ 20 files changed, 4546 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+ create mode 100644 drivers/net/ethernet/ralink/Kconfig
+ create mode 100644 drivers/net/ethernet/ralink/Makefile
+ create mode 100644 drivers/net/ethernet/ralink/esw_rt3052.c
+ create mode 100644 drivers/net/ethernet/ralink/esw_rt3052.h
+ create mode 100644 drivers/net/ethernet/ralink/gsw_mt7620a.c
+ create mode 100644 drivers/net/ethernet/ralink/gsw_mt7620a.h
+ create mode 100644 drivers/net/ethernet/ralink/mdio.c
+ create mode 100644 drivers/net/ethernet/ralink/mdio.h
+ create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.c
+ create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.h
+ create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.c
+ create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.h
+ create mode 100644 drivers/net/ethernet/ralink/soc_mt7620.c
+ create mode 100644 drivers/net/ethernet/ralink/soc_rt2880.c
+ create mode 100644 drivers/net/ethernet/ralink/soc_rt305x.c
+ create mode 100644 drivers/net/ethernet/ralink/soc_rt3883.c
+
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+new file mode 100644
+index 0000000..2098c5c
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+@@ -0,0 +1,27 @@
++/*
++ *  Ralink RT305x SoC platform device registration
++ *
++ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef _RT305X_ESW_PLATFORM_H
++#define _RT305X_ESW_PLATFORM_H
++
++enum {
++	RT305X_ESW_VLAN_CONFIG_NONE = 0,
++	RT305X_ESW_VLAN_CONFIG_LLLLW,
++	RT305X_ESW_VLAN_CONFIG_WLLLL,
++};
++
++struct rt305x_esw_platform_data
++{
++	u8 vlan_config;
++	u32 reg_initval_fct2;
++	u32 reg_initval_fpa2;
++};
++
++#endif /* _RT305X_ESW_PLATFORM_H */
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index ca7ee3a..1a6b458 100644
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -221,6 +221,7 @@ void __init ralink_clk_init(void)
+ 	}
+ 
+ 	ralink_clk_add("cpu", cpu_rate);
++	ralink_clk_add("sys", sys_rate);
+ 	ralink_clk_add("10000b00.spi", sys_rate);
+ 	ralink_clk_add("10000100.timer", wdt_rate);
+ 	ralink_clk_add("10000120.watchdog", wdt_rate);
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index ed956e0..0b3caa1 100644
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -135,6 +135,7 @@ config ETHOC
+ source "drivers/net/ethernet/packetengines/Kconfig"
+ source "drivers/net/ethernet/pasemi/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
++source "drivers/net/ethernet/ralink/Kconfig"
+ source "drivers/net/ethernet/realtek/Kconfig"
+ source "drivers/net/ethernet/renesas/Kconfig"
+ source "drivers/net/ethernet/rdc/Kconfig"
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index 8268d85..508c494 100644
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -53,6 +53,7 @@ obj-$(CONFIG_ETHOC) += ethoc.o
+ obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
+ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
++obj-$(CONFIG_NET_RALINK) += ralink/
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+ obj-$(CONFIG_SH_ETH) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
+diff --git a/drivers/net/ethernet/ralink/Kconfig b/drivers/net/ethernet/ralink/Kconfig
+new file mode 100644
+index 0000000..ca2c9ad
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/Kconfig
+@@ -0,0 +1,31 @@
++config NET_RALINK
++	tristate "Ralink RT288X/RT3X5X/RT3662/RT3883/MT7620 ethernet driver"
++	depends on RALINK
++	help
++	  This driver supports the ethernet mac inside the ralink wisocs
++
++if NET_RALINK
++
++config NET_RALINK_MDIO
++	def_bool NET_RALINK
++	depends on (SOC_RT288X || SOC_RT3883 || SOC_MT7620)
++	select PHYLIB
++
++config NET_RALINK_MDIO_RT2880
++	def_bool NET_RALINK
++	depends on (SOC_RT288X || SOC_RT3883)
++	select NET_RALINK_MDIO
++
++config NET_RALINK_ESW_RT3052
++	def_bool NET_RALINK
++	depends on SOC_RT305X
++	select PHYLIB
++	select SWCONFIG
++
++config NET_RALINK_GSW_MT7620
++	def_bool NET_RALINK
++	depends on SOC_MT7620
++	select NET_RALINK_MDIO
++	select PHYLIB
++	select SWCONFIG
++endif
+diff --git a/drivers/net/ethernet/ralink/Makefile b/drivers/net/ethernet/ralink/Makefile
+new file mode 100644
+index 0000000..a38fa21
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/Makefile
+@@ -0,0 +1,18 @@
++#
++# Makefile for the Ralink SoCs built-in ethernet macs
++#
++
++ralink-eth-y					+= ralink_soc_eth.o
++
++ralink-eth-$(CONFIG_NET_RALINK_MDIO)		+= mdio.o
++ralink-eth-$(CONFIG_NET_RALINK_MDIO_RT2880)	+= mdio_rt2880.o
++
++ralink-eth-$(CONFIG_NET_RALINK_ESW_RT3052)	+= esw_rt3052.o
++ralink-eth-$(CONFIG_NET_RALINK_GSW_MT7620)	+= gsw_mt7620a.o
++
++ralink-eth-$(CONFIG_SOC_RT288X)			+= soc_rt2880.o
++ralink-eth-$(CONFIG_SOC_RT305X)			+= soc_rt305x.o
++ralink-eth-$(CONFIG_SOC_RT3883)			+= soc_rt3883.o
++ralink-eth-$(CONFIG_SOC_MT7620)			+= soc_mt7620.o
++
++obj-$(CONFIG_NET_RALINK)			+= ralink-eth.o
+diff --git a/drivers/net/ethernet/ralink/esw_rt3052.c b/drivers/net/ethernet/ralink/esw_rt3052.c
+new file mode 100644
+index 0000000..b937062
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/esw_rt3052.c
+@@ -0,0 +1,1463 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++
++#include <linux/ioport.h>
++#include <linux/switch.h>
++#include <linux/mii.h>
++
++#include <ralink_regs.h>
++#include <asm/mach-ralink/rt305x.h>
++#include <asm/mach-ralink/rt305x_esw_platform.h>
++
++/*
++ * HW limitations for this switch:
++ * - No large frame support (PKT_MAX_LEN at most 1536)
++ * - Can't have untagged vlan and tagged vlan on one port at the same time,
++ *   though this might be possible using the undocumented PPE.
++ */
++
++#define RT305X_ESW_REG_ISR		0x00
++#define RT305X_ESW_REG_IMR		0x04
++#define RT305X_ESW_REG_FCT0		0x08
++#define RT305X_ESW_REG_PFC1		0x14
++#define RT305X_ESW_REG_ATS		0x24
++#define RT305X_ESW_REG_ATS0		0x28
++#define RT305X_ESW_REG_ATS1		0x2c
++#define RT305X_ESW_REG_ATS2		0x30
++#define RT305X_ESW_REG_PVIDC(_n)	(0x40 + 4 * (_n))
++#define RT305X_ESW_REG_VLANI(_n)	(0x50 + 4 * (_n))
++#define RT305X_ESW_REG_VMSC(_n)		(0x70 + 4 * (_n))
++#define RT305X_ESW_REG_POA		0x80
++#define RT305X_ESW_REG_FPA		0x84
++#define RT305X_ESW_REG_SOCPC		0x8c
++#define RT305X_ESW_REG_POC0		0x90
++#define RT305X_ESW_REG_POC1		0x94
++#define RT305X_ESW_REG_POC2		0x98
++#define RT305X_ESW_REG_SGC		0x9c
++#define RT305X_ESW_REG_STRT		0xa0
++#define RT305X_ESW_REG_PCR0		0xc0
++#define RT305X_ESW_REG_PCR1		0xc4
++#define RT305X_ESW_REG_FPA2		0xc8
++#define RT305X_ESW_REG_FCT2		0xcc
++#define RT305X_ESW_REG_SGC2		0xe4
++#define RT305X_ESW_REG_P0LED		0xa4
++#define RT305X_ESW_REG_P1LED		0xa8
++#define RT305X_ESW_REG_P2LED		0xac
++#define RT305X_ESW_REG_P3LED		0xb0
++#define RT305X_ESW_REG_P4LED		0xb4
++#define RT305X_ESW_REG_PXPC(_x)		(0xe8 + (4 * _x))
++#define RT305X_ESW_REG_P1PC		0xec
++#define RT305X_ESW_REG_P2PC		0xf0
++#define RT305X_ESW_REG_P3PC		0xf4
++#define RT305X_ESW_REG_P4PC		0xf8
++#define RT305X_ESW_REG_P5PC		0xfc
++
++#define RT305X_ESW_LED_LINK		0
++#define RT305X_ESW_LED_100M		1
++#define RT305X_ESW_LED_DUPLEX		2
++#define RT305X_ESW_LED_ACTIVITY		3
++#define RT305X_ESW_LED_COLLISION	4
++#define RT305X_ESW_LED_LINKACT		5
++#define RT305X_ESW_LED_DUPLCOLL		6
++#define RT305X_ESW_LED_10MACT		7
++#define RT305X_ESW_LED_100MACT		8
++/* Additional led states not in datasheet: */
++#define RT305X_ESW_LED_BLINK		10
++#define RT305X_ESW_LED_ON		12
++
++#define RT305X_ESW_LINK_S		25
++#define RT305X_ESW_DUPLEX_S		9
++#define RT305X_ESW_SPD_S		0
++
++#define RT305X_ESW_PCR0_WT_NWAY_DATA_S	16
++#define RT305X_ESW_PCR0_WT_PHY_CMD	BIT(13)
++#define RT305X_ESW_PCR0_CPU_PHY_REG_S	8
++
++#define RT305X_ESW_PCR1_WT_DONE		BIT(0)
++
++#define RT305X_ESW_ATS_TIMEOUT		(5 * HZ)
++#define RT305X_ESW_PHY_TIMEOUT		(5 * HZ)
++
++#define RT305X_ESW_PVIDC_PVID_M		0xfff
++#define RT305X_ESW_PVIDC_PVID_S		12
++
++#define RT305X_ESW_VLANI_VID_M		0xfff
++#define RT305X_ESW_VLANI_VID_S		12
++
++#define RT305X_ESW_VMSC_MSC_M		0xff
++#define RT305X_ESW_VMSC_MSC_S		8
++
++#define RT305X_ESW_SOCPC_DISUN2CPU_S	0
++#define RT305X_ESW_SOCPC_DISMC2CPU_S	8
++#define RT305X_ESW_SOCPC_DISBC2CPU_S	16
++#define RT305X_ESW_SOCPC_CRC_PADDING	BIT(25)
++
++#define RT305X_ESW_POC0_EN_BP_S		0
++#define RT305X_ESW_POC0_EN_FC_S		8
++#define RT305X_ESW_POC0_DIS_RMC2CPU_S	16
++#define RT305X_ESW_POC0_DIS_PORT_M	0x7f
++#define RT305X_ESW_POC0_DIS_PORT_S	23
++
++#define RT305X_ESW_POC2_UNTAG_EN_M	0xff
++#define RT305X_ESW_POC2_UNTAG_EN_S	0
++#define RT305X_ESW_POC2_ENAGING_S	8
++#define RT305X_ESW_POC2_DIS_UC_PAUSE_S	16
++
++#define RT305X_ESW_SGC2_DOUBLE_TAG_M	0x7f
++#define RT305X_ESW_SGC2_DOUBLE_TAG_S	0
++#define RT305X_ESW_SGC2_LAN_PMAP_M	0x3f
++#define RT305X_ESW_SGC2_LAN_PMAP_S	24
++
++#define RT305X_ESW_PFC1_EN_VLAN_M	0xff
++#define RT305X_ESW_PFC1_EN_VLAN_S	16
++#define RT305X_ESW_PFC1_EN_TOS_S	24
++
++#define RT305X_ESW_VLAN_NONE		0xfff
++
++#define RT305X_ESW_GSC_BC_STROM_MASK	0x3
++#define RT305X_ESW_GSC_BC_STROM_SHIFT	4
++
++#define RT305X_ESW_GSC_LED_FREQ_MASK	0x3
++#define RT305X_ESW_GSC_LED_FREQ_SHIFT	23
++
++#define RT305X_ESW_POA_LINK_MASK	0x1f
++#define RT305X_ESW_POA_LINK_SHIFT	25
++
++#define RT305X_ESW_PORT_ST_CHG		BIT(26)
++#define RT305X_ESW_PORT0		0
++#define RT305X_ESW_PORT1		1
++#define RT305X_ESW_PORT2		2
++#define RT305X_ESW_PORT3		3
++#define RT305X_ESW_PORT4		4
++#define RT305X_ESW_PORT5		5
++#define RT305X_ESW_PORT6		6
++
++#define RT305X_ESW_PORTS_NONE		0
++
++#define RT305X_ESW_PMAP_LLLLLL		0x3f
++#define RT305X_ESW_PMAP_LLLLWL		0x2f
++#define RT305X_ESW_PMAP_WLLLLL		0x3e
++
++#define RT305X_ESW_PORTS_INTERNAL					\
++		(BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) |	\
++		 BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) |	\
++		 BIT(RT305X_ESW_PORT4))
++
++#define RT305X_ESW_PORTS_NOCPU						\
++		(RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
++
++#define RT305X_ESW_PORTS_CPU	BIT(RT305X_ESW_PORT6)
++
++#define RT305X_ESW_PORTS_ALL						\
++		(RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
++
++#define RT305X_ESW_NUM_VLANS		16
++#define RT305X_ESW_NUM_VIDS		4096
++#define RT305X_ESW_NUM_PORTS		7
++#define RT305X_ESW_NUM_LANWAN		6
++#define RT305X_ESW_NUM_LEDS		5
++
++#define RT5350_ESW_REG_PXTPC(_x)	(0x150 + (4 * _x))
++#define RT5350_EWS_REG_LED_POLARITY	0x168
++#define RT5350_RESET_EPHY		BIT(24)
++#define SYSC_REG_RESET_CTRL		0x34
++
++enum {
++	/* Global attributes. */
++	RT305X_ESW_ATTR_ENABLE_VLAN,
++	RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
++	RT305X_ESW_ATTR_BC_STATUS,
++	RT305X_ESW_ATTR_LED_FREQ,
++	/* Port attributes. */
++	RT305X_ESW_ATTR_PORT_DISABLE,
++	RT305X_ESW_ATTR_PORT_DOUBLETAG,
++	RT305X_ESW_ATTR_PORT_UNTAG,
++	RT305X_ESW_ATTR_PORT_LED,
++	RT305X_ESW_ATTR_PORT_LAN,
++	RT305X_ESW_ATTR_PORT_RECV_BAD,
++	RT305X_ESW_ATTR_PORT_RECV_GOOD,
++	RT5350_ESW_ATTR_PORT_TR_BAD,
++	RT5350_ESW_ATTR_PORT_TR_GOOD,
++};
++
++struct esw_port {
++	bool	disable;
++	bool	doubletag;
++	bool	untag;
++	u8	led;
++	u16	pvid;
++};
++
++struct esw_vlan {
++	u8	ports;
++	u16	vid;
++};
++
++struct rt305x_esw {
++	struct device		*dev;
++	void __iomem		*base;
++	int			irq;
++	const struct rt305x_esw_platform_data *pdata;
++	/* Protects against concurrent register rmw operations. */
++	spinlock_t		reg_rw_lock;
++
++	unsigned char		port_map;
++	unsigned int		reg_initval_fct2;
++	unsigned int		reg_initval_fpa2;
++	unsigned int		reg_led_polarity;
++
++
++	struct switch_dev	swdev;
++	bool			global_vlan_enable;
++	bool			alt_vlan_disable;
++	int			bc_storm_protect;
++	int			led_frequency;
++	struct esw_vlan vlans[RT305X_ESW_NUM_VLANS];
++	struct esw_port ports[RT305X_ESW_NUM_PORTS];
++
++};
++
++static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg)
++{
++	__raw_writel(val, esw->base + reg);
++}
++
++static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg)
++{
++	return __raw_readl(esw->base + reg);
++}
++
++static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
++		   unsigned long val)
++{
++	unsigned long t;
++
++	t = __raw_readl(esw->base + reg) & ~mask;
++	__raw_writel(t | val, esw->base + reg);
++}
++
++static void esw_rmw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
++	       unsigned long val)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&esw->reg_rw_lock, flags);
++	esw_rmw_raw(esw, reg, mask, val);
++	spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
++}
++
++static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr, u32 phy_register,
++		 u32 write_data)
++{
++	unsigned long t_start = jiffies;
++	int ret = 0;
++
++	while (1) {
++		if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) &
++		      RT305X_ESW_PCR1_WT_DONE))
++			break;
++		if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
++			ret = 1;
++			goto out;
++		}
++	}
++
++	write_data &= 0xffff;
++	esw_w32(esw,
++		      (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
++		      (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
++		      (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
++		      RT305X_ESW_REG_PCR0);
++
++	t_start = jiffies;
++	while (1) {
++		if (esw_r32(esw, RT305X_ESW_REG_PCR1) &
++		    RT305X_ESW_PCR1_WT_DONE)
++			break;
++
++		if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
++			ret = 1;
++			break;
++		}
++	}
++out:
++	if (ret)
++		printk(KERN_ERR "ramips_eth: MDIO timeout\n");
++	return ret;
++}
++
++static unsigned esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan)
++{
++	unsigned s;
++	unsigned val;
++
++	s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
++	val = esw_r32(esw, RT305X_ESW_REG_VLANI(vlan / 2));
++	val = (val >> s) & RT305X_ESW_VLANI_VID_M;
++
++	return val;
++}
++
++static void esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid)
++{
++	unsigned s;
++
++	s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
++	esw_rmw(esw,
++		       RT305X_ESW_REG_VLANI(vlan / 2),
++		       RT305X_ESW_VLANI_VID_M << s,
++		       (vid & RT305X_ESW_VLANI_VID_M) << s);
++}
++
++static unsigned esw_get_pvid(struct rt305x_esw *esw, unsigned port)
++{
++	unsigned s, val;
++
++	s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
++	val = esw_r32(esw, RT305X_ESW_REG_PVIDC(port / 2));
++	return (val >> s) & RT305X_ESW_PVIDC_PVID_M;
++}
++
++static void esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid)
++{
++	unsigned s;
++
++	s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
++	esw_rmw(esw,
++		       RT305X_ESW_REG_PVIDC(port / 2),
++		       RT305X_ESW_PVIDC_PVID_M << s,
++		       (pvid & RT305X_ESW_PVIDC_PVID_M) << s);
++}
++
++static unsigned esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan)
++{
++	unsigned s, val;
++
++	s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
++	val = esw_r32(esw, RT305X_ESW_REG_VMSC(vlan / 4));
++	val = (val >> s) & RT305X_ESW_VMSC_MSC_M;
++
++	return val;
++}
++
++static void esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc)
++{
++	unsigned s;
++
++	s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
++	esw_rmw(esw,
++		       RT305X_ESW_REG_VMSC(vlan / 4),
++		       RT305X_ESW_VMSC_MSC_M << s,
++		       (msc & RT305X_ESW_VMSC_MSC_M) << s);
++}
++
++static unsigned esw_get_port_disable(struct rt305x_esw *esw)
++{
++	unsigned reg;
++	reg = esw_r32(esw, RT305X_ESW_REG_POC0);
++	return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
++	       RT305X_ESW_POC0_DIS_PORT_M;
++}
++
++static void esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask)
++{
++	unsigned old_mask;
++	unsigned enable_mask;
++	unsigned changed;
++	int i;
++
++	old_mask = esw_get_port_disable(esw);
++	changed = old_mask ^ disable_mask;
++	enable_mask = old_mask & disable_mask;
++
++	/* enable before writing to MII */
++	esw_rmw(esw, RT305X_ESW_REG_POC0,
++		       (RT305X_ESW_POC0_DIS_PORT_M <<
++			RT305X_ESW_POC0_DIS_PORT_S),
++		       enable_mask << RT305X_ESW_POC0_DIS_PORT_S);
++
++	for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) {
++		if (!(changed & (1 << i)))
++			continue;
++		if (disable_mask & (1 << i)) {
++			/* disable */
++			rt305x_mii_write(esw, i, MII_BMCR,
++					 BMCR_PDOWN);
++		} else {
++			/* enable */
++			rt305x_mii_write(esw, i, MII_BMCR,
++					 BMCR_FULLDPLX |
++					 BMCR_ANENABLE |
++					 BMCR_ANRESTART |
++					 BMCR_SPEED100);
++		}
++	}
++
++	/* disable after writing to MII */
++	esw_rmw(esw, RT305X_ESW_REG_POC0,
++		       (RT305X_ESW_POC0_DIS_PORT_M <<
++			RT305X_ESW_POC0_DIS_PORT_S),
++		       disable_mask << RT305X_ESW_POC0_DIS_PORT_S);
++}
++
++static void esw_set_gsc(struct rt305x_esw *esw)
++{
++	esw_rmw(esw, RT305X_ESW_REG_SGC,
++		RT305X_ESW_GSC_BC_STROM_MASK << RT305X_ESW_GSC_BC_STROM_SHIFT,
++		esw->bc_storm_protect << RT305X_ESW_GSC_BC_STROM_SHIFT);
++	esw_rmw(esw, RT305X_ESW_REG_SGC,
++		RT305X_ESW_GSC_LED_FREQ_MASK << RT305X_ESW_GSC_LED_FREQ_SHIFT,
++		esw->led_frequency << RT305X_ESW_GSC_LED_FREQ_SHIFT);
++}
++
++static int esw_apply_config(struct switch_dev *dev);
++
++static void esw_hw_init(struct rt305x_esw *esw)
++{
++	int i;
++	u8 port_disable = 0;
++	u8 port_map = RT305X_ESW_PMAP_LLLLLL;
++
++	/* vodoo from original driver */
++	esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
++	esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);
++	/* Port priority 1 for all ports, vlan enabled. */
++	esw_w32(esw, 0x00005555 |
++		      (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
++		      RT305X_ESW_REG_PFC1);
++
++	/* Enable Back Pressure, and Flow Control */
++	esw_w32(esw,
++		      ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
++		       (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
++		      RT305X_ESW_REG_POC0);
++
++	/* Enable Aging, and VLAN TAG removal */
++	esw_w32(esw,
++		      ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
++		       (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
++		      RT305X_ESW_REG_POC2);
++
++	if (esw->reg_initval_fct2)
++		esw_w32(esw, esw->reg_initval_fct2, RT305X_ESW_REG_FCT2);
++	else
++		esw_w32(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2);
++
++	/*
++	 * 300s aging timer, max packet len 1536, broadcast storm prevention
++	 * disabled, disable collision abort, mac xor48 hash, 10 packet back
++	 * pressure jam, GMII disable was_transmit, back pressure disabled,
++	 * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
++	 * ports.
++	 */
++	esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC);
++
++	/* Setup SoC Port control register */
++	esw_w32(esw,
++		      (RT305X_ESW_SOCPC_CRC_PADDING |
++		       (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
++		       (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
++		       (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
++		      RT305X_ESW_REG_SOCPC);
++
++	if (esw->reg_initval_fpa2)
++		esw_w32(esw, esw->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
++	else
++		esw_w32(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
++	esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA);
++
++	/* Force Link/Activity on ports */
++	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED);
++	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED);
++	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED);
++	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
++	esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
++
++	/* Copy disabled port configuration from bootloader setup */
++	port_disable = esw_get_port_disable(esw);
++	for (i = 0; i < 6; i++)
++		esw->ports[i].disable = (port_disable & (1 << i)) != 0;
++
++	if (soc_is_rt3352()) {
++		/* reset EPHY */
++		u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
++		rt_sysc_w32(val | RT5350_RESET_EPHY, SYSC_REG_RESET_CTRL);
++		rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
++
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++		for (i = 0; i < 5; i++) {
++			if (esw->ports[i].disable) {
++				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++			} else {
++				rt305x_mii_write(esw, i, MII_BMCR,
++					 BMCR_FULLDPLX |
++					 BMCR_ANENABLE |
++					 BMCR_SPEED100);
++			}
++			/* TX10 waveform coefficient LSB=0 disable PHY */
++			rt305x_mii_write(esw, i, 26, 0x1601);
++			/* TX100/TX10 AD/DA current bias */
++			rt305x_mii_write(esw, i, 29, 0x7016);
++			/* TX100 slew rate control */
++			rt305x_mii_write(esw, i, 30, 0x0038);
++		}
++
++		/* select global register */
++		rt305x_mii_write(esw, 0, 31, 0x0);
++		/* enlarge agcsel threshold 3 and threshold 2 */
++		rt305x_mii_write(esw, 0, 1, 0x4a40);
++		/* enlarge agcsel threshold 5 and threshold 4 */
++		rt305x_mii_write(esw, 0, 2, 0x6254);
++		/* enlarge agcsel threshold  */
++		rt305x_mii_write(esw, 0, 3, 0xa17f);
++		rt305x_mii_write(esw, 0,12, 0x7eaa);
++		/* longer TP_IDL tail length */
++		rt305x_mii_write(esw, 0, 14, 0x65);
++		/* increased squelch pulse count threshold. */
++		rt305x_mii_write(esw, 0, 16, 0x0684);
++		/* set TX10 signal amplitude threshold to minimum */
++		rt305x_mii_write(esw, 0, 17, 0x0fe0);
++		/* set squelch amplitude to higher threshold */
++		rt305x_mii_write(esw, 0, 18, 0x40ba);
++		/* tune TP_IDL tail and head waveform, enable power down slew rate control */
++		rt305x_mii_write(esw, 0, 22, 0x253f);
++		/* set PLL/Receive bias current are calibrated */
++		rt305x_mii_write(esw, 0, 27, 0x2fda);
++		/* change PLL/Receive bias current to internal(RT3350) */
++		rt305x_mii_write(esw, 0, 28, 0xc410);
++		/* change PLL bias current to internal(RT3052_MP3) */
++		rt305x_mii_write(esw, 0, 29, 0x598b);
++		/* select local register */
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++	} else if (soc_is_rt5350()) {
++		/* reset EPHY */
++		u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
++		rt_sysc_w32(val | RT5350_RESET_EPHY, SYSC_REG_RESET_CTRL);
++		rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
++
++		/* set the led polarity */
++		esw_w32(esw, esw->reg_led_polarity & 0x1F, RT5350_EWS_REG_LED_POLARITY);
++
++		/* local registers */
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++		for (i = 0; i < 5; i++) {
++			if (esw->ports[i].disable) {
++				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++			} else {
++				rt305x_mii_write(esw, i, MII_BMCR,
++					 BMCR_FULLDPLX |
++					 BMCR_ANENABLE |
++					 BMCR_SPEED100);
++			}
++			/* TX10 waveform coefficient LSB=0 disable PHY */
++			rt305x_mii_write(esw, i, 26, 0x1601);
++			/* TX100/TX10 AD/DA current bias */
++			rt305x_mii_write(esw, i, 29, 0x7015);
++			/* TX100 slew rate control */
++			rt305x_mii_write(esw, i, 30, 0x0038);
++		}
++
++		/* global registers */
++		rt305x_mii_write(esw, 0, 31, 0x0);
++		/* enlarge agcsel threshold 3 and threshold 2 */
++		rt305x_mii_write(esw, 0, 1, 0x4a40);
++		/* enlarge agcsel threshold 5 and threshold 4 */
++		rt305x_mii_write(esw, 0, 2, 0x6254);
++		/* enlarge agcsel threshold 6 */
++		rt305x_mii_write(esw, 0, 3, 0xa17f);
++		rt305x_mii_write(esw, 0, 12, 0x7eaa);
++		/* longer TP_IDL tail length */
++		rt305x_mii_write(esw, 0, 14, 0x65);
++		/* increased squelch pulse count threshold. */
++		rt305x_mii_write(esw, 0, 16, 0x0684);
++		/* set TX10 signal amplitude threshold to minimum */
++		rt305x_mii_write(esw, 0, 17, 0x0fe0);
++		/* set squelch amplitude to higher threshold */
++		rt305x_mii_write(esw, 0, 18, 0x40ba);
++		/* tune TP_IDL tail and head waveform, enable power down slew rate control */
++		rt305x_mii_write(esw, 0, 22, 0x253f);
++		/* set PLL/Receive bias current are calibrated */
++		rt305x_mii_write(esw, 0, 27, 0x2fda);
++		/* change PLL/Receive bias current to internal(RT3350) */
++		rt305x_mii_write(esw, 0, 28, 0xc410);
++		/* change PLL bias current to internal(RT3052_MP3) */
++		rt305x_mii_write(esw, 0, 29, 0x598b);
++		/* select local register */
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++	} else {
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++		for (i = 0; i < 5; i++) {
++			if (esw->ports[i].disable) {
++				rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++			} else {
++				rt305x_mii_write(esw, i, MII_BMCR,
++					 BMCR_FULLDPLX |
++					 BMCR_ANENABLE |
++					 BMCR_SPEED100);
++			}
++			/* TX10 waveform coefficient */
++			rt305x_mii_write(esw, i, 26, 0x1601);
++			/* TX100/TX10 AD/DA current bias */
++			rt305x_mii_write(esw, i, 29, 0x7058);
++			/* TX100 slew rate control */
++			rt305x_mii_write(esw, i, 30, 0x0018);
++		}
++
++		/* PHY IOT */
++		/* select global register */
++		rt305x_mii_write(esw, 0, 31, 0x0);
++		/* tune TP_IDL tail and head waveform */
++		rt305x_mii_write(esw, 0, 22, 0x052f);
++		/* set TX10 signal amplitude threshold to minimum */
++		rt305x_mii_write(esw, 0, 17, 0x0fe0);
++		/* set squelch amplitude to higher threshold */
++		rt305x_mii_write(esw, 0, 18, 0x40ba);
++		/* longer TP_IDL tail length */
++		rt305x_mii_write(esw, 0, 14, 0x65);
++		/* select local register */
++		rt305x_mii_write(esw, 0, 31, 0x8000);
++	}
++
++	if (esw->port_map)
++		port_map = esw->port_map;
++	else
++		port_map = RT305X_ESW_PMAP_LLLLLL;
++
++	/*
++	 * Unused HW feature, but still nice to be consistent here...
++	 * This is also exported to userspace ('lan' attribute) so it's
++	 * conveniently usable to decide which ports go into the wan vlan by
++	 * default.
++	 */
++	esw_rmw(esw, RT305X_ESW_REG_SGC2,
++		       RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
++		       port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
++
++	/* make the switch leds blink */
++	for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
++		esw->ports[i].led = 0x05;
++
++	/* Apply the empty config. */
++	esw_apply_config(&esw->swdev);
++
++	/* Only unmask the port change interrupt */
++	esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
++}
++
++static irqreturn_t esw_interrupt(int irq, void *_esw)
++{
++	struct rt305x_esw *esw = (struct rt305x_esw *) _esw;
++	u32 status;
++
++	status = esw_r32(esw, RT305X_ESW_REG_ISR);
++	if (status & RT305X_ESW_PORT_ST_CHG) {
++		u32 link = esw_r32(esw, RT305X_ESW_REG_POA);
++		link >>= RT305X_ESW_POA_LINK_SHIFT;
++		link &= RT305X_ESW_POA_LINK_MASK;
++		dev_info(esw->dev, "link changed 0x%02X\n", link);
++	}
++	esw_w32(esw, status, RT305X_ESW_REG_ISR);
++
++	return IRQ_HANDLED;
++}
++
++static int esw_apply_config(struct switch_dev *dev)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int i;
++	u8 disable = 0;
++	u8 doubletag = 0;
++	u8 en_vlan = 0;
++	u8 untag = 0;
++
++	for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++		u32 vid, vmsc;
++		if (esw->global_vlan_enable) {
++			vid = esw->vlans[i].vid;
++			vmsc = esw->vlans[i].ports;
++		} else {
++			vid = RT305X_ESW_VLAN_NONE;
++			vmsc = RT305X_ESW_PORTS_NONE;
++		}
++		esw_set_vlan_id(esw, i, vid);
++		esw_set_vmsc(esw, i, vmsc);
++	}
++
++	for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
++		u32 pvid;
++		disable |= esw->ports[i].disable << i;
++		if (esw->global_vlan_enable) {
++			doubletag |= esw->ports[i].doubletag << i;
++			en_vlan   |= 1                       << i;
++			untag     |= esw->ports[i].untag     << i;
++			pvid       = esw->ports[i].pvid;
++		} else {
++			int x = esw->alt_vlan_disable ? 0 : 1;
++			doubletag |= x << i;
++			en_vlan   |= x << i;
++			untag     |= x << i;
++			pvid       = 0;
++		}
++		esw_set_pvid(esw, i, pvid);
++		if (i < RT305X_ESW_NUM_LEDS)
++			esw_w32(esw, esw->ports[i].led,
++				      RT305X_ESW_REG_P0LED + 4*i);
++	}
++
++	esw_set_gsc(esw);
++	esw_set_port_disable(esw, disable);
++	esw_rmw(esw, RT305X_ESW_REG_SGC2,
++		       (RT305X_ESW_SGC2_DOUBLE_TAG_M <<
++			RT305X_ESW_SGC2_DOUBLE_TAG_S),
++		       doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S);
++	esw_rmw(esw, RT305X_ESW_REG_PFC1,
++		       RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S,
++		       en_vlan << RT305X_ESW_PFC1_EN_VLAN_S);
++	esw_rmw(esw, RT305X_ESW_REG_POC2,
++		       RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S,
++		       untag << RT305X_ESW_POC2_UNTAG_EN_S);
++
++	if (!esw->global_vlan_enable) {
++		/*
++		 * Still need to put all ports into vlan 0 or they'll be
++		 * isolated.
++		 * NOTE: vlan 0 is special, no vlan tag is prepended
++		 */
++		esw_set_vlan_id(esw, 0, 0);
++		esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL);
++	}
++
++	return 0;
++}
++
++static int esw_reset_switch(struct switch_dev *dev)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	esw->global_vlan_enable = 0;
++	memset(esw->ports, 0, sizeof(esw->ports));
++	memset(esw->vlans, 0, sizeof(esw->vlans));
++	esw_hw_init(esw);
++
++	return 0;
++}
++
++static int esw_get_vlan_enable(struct switch_dev *dev,
++			   const struct switch_attr *attr,
++			   struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	val->value.i = esw->global_vlan_enable;
++
++	return 0;
++}
++
++static int esw_set_vlan_enable(struct switch_dev *dev,
++			   const struct switch_attr *attr,
++			   struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	esw->global_vlan_enable = val->value.i != 0;
++
++	return 0;
++}
++
++static int esw_get_alt_vlan_disable(struct switch_dev *dev,
++				const struct switch_attr *attr,
++				struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	val->value.i = esw->alt_vlan_disable;
++
++	return 0;
++}
++
++static int esw_set_alt_vlan_disable(struct switch_dev *dev,
++				const struct switch_attr *attr,
++				struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	esw->alt_vlan_disable = val->value.i != 0;
++
++	return 0;
++}
++
++static int
++rt305x_esw_set_bc_status(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	esw->bc_storm_protect = val->value.i & RT305X_ESW_GSC_BC_STROM_MASK;
++
++	return 0;
++}
++
++static int
++rt305x_esw_get_bc_status(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	val->value.i = esw->bc_storm_protect;
++
++	return 0;
++}
++
++static int
++rt305x_esw_set_led_freq(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	esw->led_frequency = val->value.i & RT305X_ESW_GSC_LED_FREQ_MASK;
++
++	return 0;
++}
++
++static int
++rt305x_esw_get_led_freq(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	val->value.i = esw->led_frequency;
++
++	return 0;
++}
++
++static int esw_get_port_link(struct switch_dev *dev,
++			 int port,
++			 struct switch_port_link *link)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	u32 speed, poa;
++
++	if (port < 0 || port >= RT305X_ESW_NUM_PORTS)
++		return -EINVAL;
++
++	poa = esw_r32(esw, RT305X_ESW_REG_POA) >> port;
++
++	link->link = (poa >> RT305X_ESW_LINK_S) & 1;
++	link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1;
++	if (port < RT305X_ESW_NUM_LEDS) {
++		speed = (poa >> RT305X_ESW_SPD_S) & 1;
++	} else {
++		if (port == RT305X_ESW_NUM_PORTS - 1)
++			poa >>= 1;
++		speed = (poa >> RT305X_ESW_SPD_S) & 3;
++	}
++	switch (speed) {
++	case 0:
++		link->speed = SWITCH_PORT_SPEED_10;
++		break;
++	case 1:
++		link->speed = SWITCH_PORT_SPEED_100;
++		break;
++	case 2:
++	case 3: /* forced gige speed can be 2 or 3 */
++		link->speed = SWITCH_PORT_SPEED_1000;
++		break;
++	default:
++		link->speed = SWITCH_PORT_SPEED_UNKNOWN;
++		break;
++	}
++
++	return 0;
++}
++
++static int esw_get_port_bool(struct switch_dev *dev,
++			 const struct switch_attr *attr,
++			 struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int idx = val->port_vlan;
++	u32 x, reg, shift;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS)
++		return -EINVAL;
++
++	switch (attr->id) {
++	case RT305X_ESW_ATTR_PORT_DISABLE:
++		reg = RT305X_ESW_REG_POC0;
++		shift = RT305X_ESW_POC0_DIS_PORT_S;
++		break;
++	case RT305X_ESW_ATTR_PORT_DOUBLETAG:
++		reg = RT305X_ESW_REG_SGC2;
++		shift = RT305X_ESW_SGC2_DOUBLE_TAG_S;
++		break;
++	case RT305X_ESW_ATTR_PORT_UNTAG:
++		reg = RT305X_ESW_REG_POC2;
++		shift = RT305X_ESW_POC2_UNTAG_EN_S;
++		break;
++	case RT305X_ESW_ATTR_PORT_LAN:
++		reg = RT305X_ESW_REG_SGC2;
++		shift = RT305X_ESW_SGC2_LAN_PMAP_S;
++		if (idx >= RT305X_ESW_NUM_LANWAN)
++			return -EINVAL;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	x = esw_r32(esw, reg);
++	val->value.i = (x >> (idx + shift)) & 1;
++
++	return 0;
++}
++
++static int esw_set_port_bool(struct switch_dev *dev,
++			 const struct switch_attr *attr,
++			 struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int idx = val->port_vlan;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
++	    val->value.i < 0 || val->value.i > 1)
++		return -EINVAL;
++
++	switch (attr->id) {
++	case RT305X_ESW_ATTR_PORT_DISABLE:
++		esw->ports[idx].disable = val->value.i;
++		break;
++	case RT305X_ESW_ATTR_PORT_DOUBLETAG:
++		esw->ports[idx].doubletag = val->value.i;
++		break;
++	case RT305X_ESW_ATTR_PORT_UNTAG:
++		esw->ports[idx].untag = val->value.i;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int esw_get_port_recv_badgood(struct switch_dev *dev,
++				 const struct switch_attr *attr,
++				 struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int idx = val->port_vlan;
++	int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16;
++	u32 reg;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
++		return -EINVAL;
++	reg = esw_r32(esw, RT305X_ESW_REG_PXPC(idx));
++	val->value.i = (reg >> shift) & 0xffff;
++
++	return 0;
++}
++
++static int
++esw_get_port_tr_badgood(struct switch_dev *dev,
++				 const struct switch_attr *attr,
++				 struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	int idx = val->port_vlan;
++	int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16;
++	u32 reg;
++
++	if (!soc_is_rt5350())
++		return -EINVAL;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
++		return -EINVAL;
++
++	reg = esw_r32(esw, RT5350_ESW_REG_PXTPC(idx));
++	val->value.i = (reg >> shift) & 0xffff;
++
++	return 0;
++}
++
++static int esw_get_port_led(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int idx = val->port_vlan;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
++	    idx >= RT305X_ESW_NUM_LEDS)
++		return -EINVAL;
++
++	val->value.i = esw_r32(esw, RT305X_ESW_REG_P0LED + 4*idx);
++
++	return 0;
++}
++
++static int esw_set_port_led(struct switch_dev *dev,
++			const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int idx = val->port_vlan;
++
++	if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS)
++		return -EINVAL;
++
++	esw->ports[idx].led = val->value.i;
++
++	return 0;
++}
++
++static int esw_get_port_pvid(struct switch_dev *dev, int port, int *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	if (port >= RT305X_ESW_NUM_PORTS)
++		return -EINVAL;
++
++	*val = esw_get_pvid(esw, port);
++
++	return 0;
++}
++
++static int esw_set_port_pvid(struct switch_dev *dev, int port, int val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++	if (port >= RT305X_ESW_NUM_PORTS)
++		return -EINVAL;
++
++	esw->ports[port].pvid = val;
++
++	return 0;
++}
++
++static int esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	u32 vmsc, poc2;
++	int vlan_idx = -1;
++	int i;
++
++	val->len = 0;
++
++	if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS)
++		return -EINVAL;
++
++	/* valid vlan? */
++	for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++		if (esw_get_vlan_id(esw, i) == val->port_vlan &&
++		    esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) {
++			vlan_idx = i;
++			break;
++		}
++	}
++
++	if (vlan_idx == -1)
++		return -EINVAL;
++
++	vmsc = esw_get_vmsc(esw, vlan_idx);
++	poc2 = esw_r32(esw, RT305X_ESW_REG_POC2);
++
++	for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
++		struct switch_port *p;
++		int port_mask = 1 << i;
++
++		if (!(vmsc & port_mask))
++			continue;
++
++		p = &val->value.ports[val->len++];
++		p->id = i;
++		if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S))
++			p->flags = 0;
++		else
++			p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
++	}
++
++	return 0;
++}
++
++static int esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++	int ports;
++	int vlan_idx = -1;
++	int i;
++
++	if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS ||
++	    val->len > RT305X_ESW_NUM_PORTS)
++		return -EINVAL;
++
++	/* one of the already defined vlans? */
++	for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++		if (esw->vlans[i].vid == val->port_vlan &&
++		    esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) {
++			vlan_idx = i;
++			break;
++		}
++	}
++
++	/* select a free slot */
++	for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) {
++		if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE)
++			vlan_idx = i;
++	}
++
++	/* bail if all slots are in use */
++	if (vlan_idx == -1)
++		return -EINVAL;
++
++	ports = RT305X_ESW_PORTS_NONE;
++	for (i = 0; i < val->len; i++) {
++		struct switch_port *p = &val->value.ports[i];
++		int port_mask = 1 << p->id;
++		bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
++
++		if (p->id >= RT305X_ESW_NUM_PORTS)
++			return -EINVAL;
++
++		ports |= port_mask;
++		esw->ports[p->id].untag = untagged;
++	}
++	esw->vlans[vlan_idx].ports = ports;
++	if (ports == RT305X_ESW_PORTS_NONE)
++		esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE;
++	else
++		esw->vlans[vlan_idx].vid = val->port_vlan;
++
++	return 0;
++}
++
++static const struct switch_attr esw_global[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "enable_vlan",
++		.description = "VLAN mode (1:enabled)",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_ENABLE_VLAN,
++		.get = esw_get_vlan_enable,
++		.set = esw_set_vlan_enable,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "alternate_vlan_disable",
++		.description = "Use en_vlan instead of doubletag to disable"
++				" VLAN mode",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
++		.get = esw_get_alt_vlan_disable,
++		.set = esw_set_alt_vlan_disable,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "bc_storm_protect",
++		.description = "Global broadcast storm protection (0:Disable, 1:64 blocks, 2:96 blocks, 3:128 blocks)",
++		.max = 3,
++		.id = RT305X_ESW_ATTR_BC_STATUS,
++		.get = rt305x_esw_get_bc_status,
++		.set = rt305x_esw_set_bc_status,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "led_frequency",
++		.description = "LED Flash frequency (0:30mS, 1:60mS, 2:240mS, 3:480mS)",
++		.max = 3,
++		.id = RT305X_ESW_ATTR_LED_FREQ,
++		.get = rt305x_esw_get_led_freq,
++		.set = rt305x_esw_set_led_freq,
++	}
++};
++
++static const struct switch_attr esw_port[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "disable",
++		.description = "Port state (1:disabled)",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_PORT_DISABLE,
++		.get = esw_get_port_bool,
++		.set = esw_set_port_bool,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "doubletag",
++		.description = "Double tagging for incoming vlan packets "
++				"(1:enabled)",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_PORT_DOUBLETAG,
++		.get = esw_get_port_bool,
++		.set = esw_set_port_bool,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "untag",
++		.description = "Untag (1:strip outgoing vlan tag)",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_PORT_UNTAG,
++		.get = esw_get_port_bool,
++		.set = esw_set_port_bool,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "led",
++		.description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity,"
++				" 4:collision, 5:linkact, 6:duplcoll, 7:10mact,"
++				" 8:100mact, 10:blink, 11:off, 12:on)",
++		.max = 15,
++		.id = RT305X_ESW_ATTR_PORT_LED,
++		.get = esw_get_port_led,
++		.set = esw_set_port_led,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "lan",
++		.description = "HW port group (0:wan, 1:lan)",
++		.max = 1,
++		.id = RT305X_ESW_ATTR_PORT_LAN,
++		.get = esw_get_port_bool,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "recv_bad",
++		.description = "Receive bad packet counter",
++		.id = RT305X_ESW_ATTR_PORT_RECV_BAD,
++		.get = esw_get_port_recv_badgood,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "recv_good",
++		.description = "Receive good packet counter",
++		.id = RT305X_ESW_ATTR_PORT_RECV_GOOD,
++		.get = esw_get_port_recv_badgood,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "tr_bad",
++
++		.description = "Transmit bad packet counter. rt5350 only",
++		.id = RT5350_ESW_ATTR_PORT_TR_BAD,
++		.get = esw_get_port_tr_badgood,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "tr_good",
++
++		.description = "Transmit good packet counter. rt5350 only",
++		.id = RT5350_ESW_ATTR_PORT_TR_GOOD,
++		.get = esw_get_port_tr_badgood,
++	},
++};
++
++static const struct switch_attr esw_vlan[] = {
++};
++
++static const struct switch_dev_ops esw_ops = {
++	.attr_global = {
++		.attr = esw_global,
++		.n_attr = ARRAY_SIZE(esw_global),
++	},
++	.attr_port = {
++		.attr = esw_port,
++		.n_attr = ARRAY_SIZE(esw_port),
++	},
++	.attr_vlan = {
++		.attr = esw_vlan,
++		.n_attr = ARRAY_SIZE(esw_vlan),
++	},
++	.get_vlan_ports = esw_get_vlan_ports,
++	.set_vlan_ports = esw_set_vlan_ports,
++	.get_port_pvid = esw_get_port_pvid,
++	.set_port_pvid = esw_set_port_pvid,
++	.get_port_link = esw_get_port_link,
++	.apply_config = esw_apply_config,
++	.reset_switch = esw_reset_switch,
++};
++
++static struct rt305x_esw_platform_data rt3050_esw_data = {
++	/* All ports are LAN ports. */
++	.vlan_config            = RT305X_ESW_VLAN_CONFIG_NONE,
++	.reg_initval_fct2       = 0x00d6500c,
++	/*
++	 * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
++	 * turbo mii off, rgmi 3.3v off
++	 * port5: disabled
++	 * port6: enabled, gige, full-duplex, rx/tx-flow-control
++	 */
++	.reg_initval_fpa2       = 0x3f502b28,
++};
++
++static const struct of_device_id ralink_esw_match[] = {
++	{ .compatible = "ralink,rt3050-esw", .data = &rt3050_esw_data },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ralink_esw_match);
++
++static int esw_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	const struct rt305x_esw_platform_data *pdata;
++	const __be32 *port_map, *reg_init;
++	struct rt305x_esw *esw;
++	struct switch_dev *swdev;
++	struct resource *res, *irq;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata) {
++		const struct of_device_id *match;
++		match = of_match_device(ralink_esw_match, &pdev->dev);
++		if (match)
++			pdata = (struct rt305x_esw_platform_data *) match->data;
++	}
++	if (!pdata)
++		return -EINVAL;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(&pdev->dev, "no memory resource found\n");
++		return -ENOMEM;
++	}
++
++	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (!irq) {
++		dev_err(&pdev->dev, "no irq resource found\n");
++		return -ENOMEM;
++	}
++
++	esw = kzalloc(sizeof(struct rt305x_esw), GFP_KERNEL);
++	if (!esw) {
++		dev_err(&pdev->dev, "no memory for private data\n");
++		return -ENOMEM;
++	}
++
++	esw->dev = &pdev->dev;
++	esw->irq = irq->start;
++	esw->base = ioremap(res->start, resource_size(res));
++	if (!esw->base) {
++		dev_err(&pdev->dev, "ioremap failed\n");
++		err = -ENOMEM;
++		goto free_esw;
++	}
++
++	port_map = of_get_property(np, "ralink,portmap", NULL);
++        if (port_map)
++		esw->port_map = be32_to_cpu(*port_map);
++
++	reg_init = of_get_property(np, "ralink,fct2", NULL);
++        if (reg_init)
++		esw->reg_initval_fct2 = be32_to_cpu(*reg_init);
++
++	reg_init = of_get_property(np, "ralink,fpa2", NULL);
++        if (reg_init)
++		esw->reg_initval_fpa2 = be32_to_cpu(*reg_init);
++
++	reg_init = of_get_property(np, "ralink,led_polarity", NULL);
++        if (reg_init)
++		esw->reg_led_polarity = be32_to_cpu(*reg_init);
++
++	swdev = &esw->swdev;
++	swdev->of_node = pdev->dev.of_node;
++	swdev->name = "rt305x-esw";
++	swdev->alias = "rt305x";
++	swdev->cpu_port = RT305X_ESW_PORT6;
++	swdev->ports = RT305X_ESW_NUM_PORTS;
++	swdev->vlans = RT305X_ESW_NUM_VIDS;
++	swdev->ops = &esw_ops;
++
++	err = register_switch(swdev, NULL);
++	if (err < 0) {
++		dev_err(&pdev->dev, "register_switch failed\n");
++		goto unmap_base;
++	}
++
++	platform_set_drvdata(pdev, esw);
++
++	esw->pdata = pdata;
++	spin_lock_init(&esw->reg_rw_lock);
++
++	esw_hw_init(esw);
++
++	esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
++	esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
++	request_irq(esw->irq, esw_interrupt, 0, "esw", esw);
++
++	return 0;
++
++unmap_base:
++	iounmap(esw->base);
++free_esw:
++	kfree(esw);
++	return err;
++}
++
++static int esw_remove(struct platform_device *pdev)
++{
++	struct rt305x_esw *esw;
++
++	esw = platform_get_drvdata(pdev);
++	if (esw) {
++		unregister_switch(&esw->swdev);
++		platform_set_drvdata(pdev, NULL);
++		iounmap(esw->base);
++		kfree(esw);
++	}
++
++	return 0;
++}
++
++static struct platform_driver esw_driver = {
++	.probe = esw_probe,
++	.remove = esw_remove,
++	.driver = {
++		.name = "rt305x-esw",
++		.owner = THIS_MODULE,
++		.of_match_table = ralink_esw_match,
++	},
++};
++
++int __init rtesw_init(void)
++{
++	return platform_driver_register(&esw_driver);
++}
++
++void rtesw_exit(void)
++{
++	platform_driver_unregister(&esw_driver);
++}
+diff --git a/drivers/net/ethernet/ralink/esw_rt3052.h b/drivers/net/ethernet/ralink/esw_rt3052.h
+new file mode 100644
+index 0000000..2ced3dff
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/esw_rt3052.h
+@@ -0,0 +1,32 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_ESW_RT3052_H__
++#define _RALINK_ESW_RT3052_H__
++
++#ifdef CONFIG_NET_RALINK_ESW_RT3052
++
++int __init rtesw_init(void);
++void rtesw_exit(void);
++
++#else
++
++static inline int __init rtesw_init(void) { return 0; }
++static inline void rtesw_exit(void) { }
++
++#endif
++#endif
+diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.c b/drivers/net/ethernet/ralink/gsw_mt7620a.c
+new file mode 100644
+index 0000000..9fa6a54
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.c
+@@ -0,0 +1,1027 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++#include <linux/of_irq.h>
++#include <linux/of_address.h>
++#include <linux/switch.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++
++#include <linux/ioport.h>
++#include <linux/switch.h>
++#include <linux/mii.h>
++
++#include <ralink_regs.h>
++#include <asm/mach-ralink/mt7620.h>
++
++#include "ralink_soc_eth.h"
++#include "gsw_mt7620a.h"
++#include "mdio.h"
++
++#define GSW_REG_PHY_TIMEOUT	(5 * HZ)
++
++#define MT7620A_GSW_REG_PIAC	0x7004
++
++#define GSW_NUM_VLANS		16
++#define GSW_NUM_VIDS		4096
++#define GSW_NUM_PORTS		7
++#define GSW_PORT6		6
++
++#define GSW_MDIO_ACCESS		BIT(31)
++#define GSW_MDIO_READ		BIT(19)
++#define GSW_MDIO_WRITE		BIT(18)
++#define GSW_MDIO_START		BIT(16)
++#define GSW_MDIO_ADDR_SHIFT	20
++#define GSW_MDIO_REG_SHIFT	25
++
++#define GSW_REG_PORT_PMCR(x)	(0x3000 + (x * 0x100))
++#define GSW_REG_PORT_STATUS(x)	(0x3008 + (x * 0x100))
++#define GSW_REG_SMACCR0		0x3fE4
++#define GSW_REG_SMACCR1		0x3fE8
++#define GSW_REG_CKGCR		0x3ff0
++
++#define GSW_REG_IMR		0x7008
++#define GSW_REG_ISR		0x700c
++
++#define SYSC_REG_CFG1		0x14
++
++#define PORT_IRQ_ST_CHG		0x7f
++
++#define GSW_VLAN_VTCR		0x90
++#define GSW_VLAN_VTCR_VID_M	0xfff
++#define GSW_VLAN_ID(_x)		(0x100 + (4 * (_x)))
++#define GSW_VLAN_ID_VID_S	12
++#define GSW_VLAN_ID_VID_M	0xfff
++
++#define GSW_VAWD1		0x94
++#define GSW_VAWD1_VTAG_EN	BIT(28)
++#define GSW_VAWD1_PORTM_S	16
++#define GSW_VAWD1_PORTM_M	0xff
++
++#define GSW_VAWD2		0x98
++#define GSW_VAWD2_PORTT_S	16
++#define GSW_VAWD2_PORTT_M	0xff
++
++#define GSW_VTIM(_x)		(0x100 + (4 * (_x)))
++#define GSW_VTIM_M		0xfff
++#define GSW_VTIM_S		12
++
++#define GSW_REG_PCR(x)		(0x2004 + (x * 0x100))
++#define GSW_REG_PCR_EG_TAG_S	28
++#define GSW_REG_PCR_EG_TAG_M	0x3
++
++#define SYSCFG1			0x14
++
++#define ESW_PHY_POLLING		0x7000
++
++#define	PMCR_IPG		BIT(18)
++#define	PMCR_MAC_MODE		BIT(16)
++#define	PMCR_FORCE		BIT(15)
++#define	PMCR_TX_EN		BIT(14)
++#define	PMCR_RX_EN		BIT(13)
++#define	PMCR_BACKOFF		BIT(9)
++#define	PMCR_BACKPRES		BIT(8)
++#define	PMCR_RX_FC		BIT(5)
++#define	PMCR_TX_FC		BIT(4)
++#define	PMCR_SPEED(_x)		(_x << 2)
++#define	PMCR_DUPLEX		BIT(1)
++#define	PMCR_LINK		BIT(0)
++
++#define PHY_AN_EN		BIT(31)
++#define PHY_PRE_EN		BIT(30)
++#define PMY_MDC_CONF(_x)	((_x & 0x3f) << 24)
++
++enum {
++	/* Global attributes. */
++	GSW_ATTR_ENABLE_VLAN,
++	/* Port attributes. */
++	GSW_ATTR_PORT_UNTAG,
++};
++
++enum {
++	PORT4_EPHY = 0,
++	PORT4_EXT,
++};
++
++struct gsw_port {
++	bool	disable;
++	bool	untag;
++	u16	pvid;
++};
++
++struct gsw_vlan {
++	u8	ports;
++	u16	vid;
++};
++
++struct mt7620_gsw {
++	struct device		*dev;
++	void __iomem		*base;
++	int			irq;
++
++	struct switch_dev	swdev;
++	bool			global_vlan_enable;
++	struct gsw_vlan		vlans[GSW_NUM_VLANS];
++	struct gsw_port		ports[GSW_NUM_PORTS];
++	long unsigned int	autopoll;
++	int			port4;
++};
++
++static inline void gsw_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
++{
++	iowrite32(val, gsw->base + reg);
++}
++
++static inline u32 gsw_r32(struct mt7620_gsw *gsw, unsigned reg)
++{
++	return ioread32(gsw->base + reg);
++}
++
++static int mt7620_mii_busy_wait(struct mt7620_gsw *gsw)
++{
++	unsigned long t_start = jiffies;
++
++	while (1) {
++		if (!(gsw_r32(gsw, MT7620A_GSW_REG_PIAC) & GSW_MDIO_ACCESS))
++			return 0;
++		if (time_after(jiffies, t_start + GSW_REG_PHY_TIMEOUT)) {
++			break;
++		}
++	}
++
++	printk(KERN_ERR "mdio: MDIO timeout\n");
++	return -1;
++}
++
++static u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr, u32 phy_register,
++				u32 write_data)
++{
++	if (mt7620_mii_busy_wait(gsw))
++		return -1;
++
++	write_data &= 0xffff;
++
++	gsw_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_WRITE |
++		(phy_register << GSW_MDIO_REG_SHIFT) |
++		(phy_addr << GSW_MDIO_ADDR_SHIFT) | write_data,
++		MT7620A_GSW_REG_PIAC);
++
++	if (mt7620_mii_busy_wait(gsw))
++		return -1;
++
++	return 0;
++}
++
++int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
++{
++	struct fe_priv *priv = bus->priv;
++	struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++
++	return _mt7620_mii_write(gsw, phy_addr, phy_reg, val);
++}
++
++int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++	struct fe_priv *priv = bus->priv;
++	struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++	u32 d;
++
++	if (mt7620_mii_busy_wait(gsw))
++		return 0xffff;
++
++	gsw_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_READ |
++		(phy_reg << GSW_MDIO_REG_SHIFT) |
++		(phy_addr << GSW_MDIO_ADDR_SHIFT),
++		MT7620A_GSW_REG_PIAC);
++
++	if (mt7620_mii_busy_wait(gsw))
++		return 0xffff;
++
++	d = gsw_r32(gsw, MT7620A_GSW_REG_PIAC) & 0xffff;
++
++	return d;
++}
++
++static unsigned char *fe_speed_str(int speed)
++{
++	switch (speed) {
++	case 2:
++	case SPEED_1000:
++		return "1000";
++	case 1:
++	case SPEED_100:
++		return "100";
++	case 0:
++	case SPEED_10:
++		return "10";
++	}
++
++	return "? ";
++}
++
++int mt7620a_has_carrier(struct fe_priv *priv)
++{
++        struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++	int i;
++
++	for (i = 0; i < GSW_PORT6; i++)
++		if (gsw_r32(gsw, GSW_REG_PORT_STATUS(i)) & 0x1)
++			return 1;
++	return 0;
++}
++
++static void mt7620a_handle_carrier(struct fe_priv *priv)
++{
++	if (!priv->phy)
++		return;
++
++	if (mt7620a_has_carrier(priv))
++		netif_carrier_on(priv->netdev);
++	else
++		netif_carrier_off(priv->netdev);
++}
++
++void mt7620_mdio_link_adjust(struct fe_priv *priv, int port)
++{
++	if (priv->link[port])
++		netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
++			port, fe_speed_str(priv->phy->speed[port]),
++			(DUPLEX_FULL == priv->phy->duplex[port]) ? "Full" : "Half");
++	else
++		netdev_info(priv->netdev, "port %d link down\n", port);
++	mt7620a_handle_carrier(priv);
++}
++
++static irqreturn_t gsw_interrupt(int irq, void *_priv)
++{
++	struct fe_priv *priv = (struct fe_priv *) _priv;
++	struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++	u32 status;
++	int i, max = (gsw->port4 == PORT4_EPHY) ? (4) : (3);
++
++	status = gsw_r32(gsw, GSW_REG_ISR);
++	if (status & PORT_IRQ_ST_CHG)
++		for (i = 0; i <= max; i++) {
++			u32 status = gsw_r32(gsw, GSW_REG_PORT_STATUS(i));
++			int link = status & 0x1;
++
++			if (link != priv->link[i]) {
++				if (link)
++					netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
++							i, fe_speed_str((status >> 2) & 3),
++							(status & 0x2) ? "Full" : "Half");
++				else
++					netdev_info(priv->netdev, "port %d link down\n", i);
++			}
++
++			priv->link[i] = link;
++		}
++	mt7620a_handle_carrier(priv);
++
++	gsw_w32(gsw, status, GSW_REG_ISR);
++
++	return IRQ_HANDLED;
++}
++
++static int mt7620_is_bga(void)
++{
++	u32 bga = rt_sysc_r32(0x0c);
++
++	return (bga >> 16) & 1;
++}
++
++static void gsw_auto_poll(struct mt7620_gsw *gsw)
++{
++	int phy;
++	int lsb = -1, msb = 0;
++
++	for_each_set_bit(phy, &gsw->autopoll, 32) {
++		if (lsb < 0)
++			lsb = phy;
++		msb = phy;
++	}
++
++	gsw_w32(gsw, PHY_AN_EN | PHY_PRE_EN | PMY_MDC_CONF(5) | (msb << 8) | lsb, ESW_PHY_POLLING);
++}
++
++void mt7620_port_init(struct fe_priv *priv, struct device_node *np)
++{
++	struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++	const __be32 *_id = of_get_property(np, "reg", NULL);
++	int phy_mode, size, id;
++	int shift = 12;
++	u32 val, mask = 0;
++	int min = (gsw->port4 == PORT4_EPHY) ? (5) : (4);
++
++	if (!_id || (be32_to_cpu(*_id) < min) || (be32_to_cpu(*_id) > 5)) {
++		if (_id)
++			pr_err("%s: invalid port id %d\n", np->name, be32_to_cpu(*_id));
++		else
++			pr_err("%s: invalid port id\n", np->name);
++		return;
++	}
++
++	id = be32_to_cpu(*_id);
++
++	if (id == 4)
++		shift = 14;
++
++	priv->phy->phy_fixed[id] = of_get_property(np, "ralink,fixed-link", &size);
++	if (priv->phy->phy_fixed[id] && (size != (4 * sizeof(*priv->phy->phy_fixed[id])))) {
++		pr_err("%s: invalid fixed link property\n", np->name);
++		priv->phy->phy_fixed[id] = NULL;
++		return;
++	}
++
++	phy_mode = of_get_phy_mode(np);
++	switch (phy_mode) {
++	case PHY_INTERFACE_MODE_RGMII:
++		mask = 0;
++		break;
++	case PHY_INTERFACE_MODE_MII:
++		mask = 1;
++		break;
++	case PHY_INTERFACE_MODE_RMII:
++		mask = 2;
++		break;
++	default:
++		dev_err(priv->device, "port %d - invalid phy mode\n", priv->phy->speed[id]);
++		return;
++	}
++
++	priv->phy->phy_node[id] = of_parse_phandle(np, "phy-handle", 0);
++	if (!priv->phy->phy_node[id] && !priv->phy->phy_fixed[id])
++		return;
++
++	val = rt_sysc_r32(SYSCFG1);
++	val &= ~(3 << shift);
++	val |= mask << shift;
++	rt_sysc_w32(val, SYSCFG1);
++
++	if (priv->phy->phy_fixed[id]) {
++		const __be32 *link = priv->phy->phy_fixed[id];
++		int tx_fc = be32_to_cpup(link++);
++		int rx_fc = be32_to_cpup(link++);
++		u32 val = 0;
++
++		priv->phy->speed[id] = be32_to_cpup(link++);
++		priv->phy->duplex[id] = be32_to_cpup(link++);
++		priv->link[id] = 1;
++
++		switch (priv->phy->speed[id]) {
++		case SPEED_10:
++			val = 0;
++			break;
++		case SPEED_100:
++			val = 1;
++			break;
++		case SPEED_1000:
++			val = 2;
++			break;
++		default:
++			dev_err(priv->device, "invalid link speed: %d\n", priv->phy->speed[id]);
++			priv->phy->phy_fixed[id] = 0;
++			return;
++		}
++		val = PMCR_SPEED(val);
++		val |= PMCR_LINK | PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
++			PMCR_TX_EN | PMCR_FORCE | PMCR_MAC_MODE | PMCR_IPG;
++		if (tx_fc)
++			val |= PMCR_TX_FC;
++		if (rx_fc)
++			val |= PMCR_RX_FC;
++		if (priv->phy->duplex[id])
++			val |= PMCR_DUPLEX;
++		gsw_w32(gsw, val, GSW_REG_PORT_PMCR(id));
++		dev_info(priv->device, "using fixed link parameters\n");
++		return;
++	}
++
++	if (priv->phy->phy_node[id] && priv->mii_bus->phy_map[id]) {
++		u32 val = PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
++			PMCR_TX_EN |  PMCR_MAC_MODE | PMCR_IPG;
++
++		gsw_w32(gsw, val, GSW_REG_PORT_PMCR(id));
++		fe_connect_phy_node(priv, priv->phy->phy_node[id]);
++		gsw->autopoll |= BIT(id);
++		gsw_auto_poll(gsw);
++		return;
++	}
++}
++
++static void gsw_hw_init(struct mt7620_gsw *gsw)
++{
++	u32 is_BGA = mt7620_is_bga();
++
++	rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | BIT(8), SYSC_REG_CFG1);
++	gsw_w32(gsw, gsw_r32(gsw, GSW_REG_CKGCR) & ~(0x3 << 4), GSW_REG_CKGCR);
++
++	/*correct  PHY  setting L3.0 BGA*/
++	_mt7620_mii_write(gsw, 1, 31, 0x4000); //global, page 4
++
++	_mt7620_mii_write(gsw, 1, 17, 0x7444);
++	if (is_BGA)
++		_mt7620_mii_write(gsw, 1, 19, 0x0114);
++	else
++		_mt7620_mii_write(gsw, 1, 19, 0x0117);
++
++	_mt7620_mii_write(gsw, 1, 22, 0x10cf);
++	_mt7620_mii_write(gsw, 1, 25, 0x6212);
++	_mt7620_mii_write(gsw, 1, 26, 0x0777);
++	_mt7620_mii_write(gsw, 1, 29, 0x4000);
++	_mt7620_mii_write(gsw, 1, 28, 0xc077);
++	_mt7620_mii_write(gsw, 1, 24, 0x0000);
++
++	_mt7620_mii_write(gsw, 1, 31, 0x3000); //global, page 3
++	_mt7620_mii_write(gsw, 1, 17, 0x4838);
++
++	_mt7620_mii_write(gsw, 1, 31, 0x2000); //global, page 2
++	if (is_BGA) {
++		_mt7620_mii_write(gsw, 1, 21, 0x0515);
++		_mt7620_mii_write(gsw, 1, 22, 0x0053);
++		_mt7620_mii_write(gsw, 1, 23, 0x00bf);
++		_mt7620_mii_write(gsw, 1, 24, 0x0aaf);
++		_mt7620_mii_write(gsw, 1, 25, 0x0fad);
++		_mt7620_mii_write(gsw, 1, 26, 0x0fc1);
++	} else {
++		_mt7620_mii_write(gsw, 1, 21, 0x0517);
++		_mt7620_mii_write(gsw, 1, 22, 0x0fd2);
++		_mt7620_mii_write(gsw, 1, 23, 0x00bf);
++		_mt7620_mii_write(gsw, 1, 24, 0x0aab);
++		_mt7620_mii_write(gsw, 1, 25, 0x00ae);
++		_mt7620_mii_write(gsw, 1, 26, 0x0fff);
++	}
++	_mt7620_mii_write(gsw, 1, 31, 0x1000); //global, page 1
++	_mt7620_mii_write(gsw, 1, 17, 0xe7f8);
++
++	_mt7620_mii_write(gsw, 1, 31, 0x8000); //local, page 0
++	_mt7620_mii_write(gsw, 0, 30, 0xa000);
++	_mt7620_mii_write(gsw, 1, 30, 0xa000);
++	_mt7620_mii_write(gsw, 2, 30, 0xa000);
++	_mt7620_mii_write(gsw, 3, 30, 0xa000);
++
++	_mt7620_mii_write(gsw, 0, 4, 0x05e1);
++	_mt7620_mii_write(gsw, 1, 4, 0x05e1);
++	_mt7620_mii_write(gsw, 2, 4, 0x05e1);
++	_mt7620_mii_write(gsw, 3, 4, 0x05e1);
++	_mt7620_mii_write(gsw, 1, 31, 0xa000); //local, page 2
++	_mt7620_mii_write(gsw, 0, 16, 0x1111);
++	_mt7620_mii_write(gsw, 1, 16, 0x1010);
++	_mt7620_mii_write(gsw, 2, 16, 0x1515);
++	_mt7620_mii_write(gsw, 3, 16, 0x0f0f);
++
++	/* CPU Port6 Force Link 1G, FC ON */
++	gsw_w32(gsw, 0x5e33b, GSW_REG_PORT_PMCR(6));
++	/* Set Port6 CPU Port */
++	gsw_w32(gsw, 0x7f7f7fe0, 0x0010);
++
++//	GSW_VAWD2
++
++	/* setup port 4 */
++	if (gsw->port4 == PORT4_EPHY) {
++		u32 val = rt_sysc_r32(SYSCFG1);
++		val |= 3 << 14;
++		rt_sysc_w32(val, SYSCFG1);
++		_mt7620_mii_write(gsw, 4, 30, 0xa000);
++		_mt7620_mii_write(gsw, 4, 4, 0x05e1);
++		_mt7620_mii_write(gsw, 4, 16, 0x1313);
++		pr_info("gsw: setting port4 to ephy mode\n");
++	}
++}
++
++static int gsw_reset_switch(struct switch_dev *dev)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++
++	gsw->global_vlan_enable = 0;
++	memset(gsw->ports, 0, sizeof(gsw->ports));
++	memset(gsw->vlans, 0, sizeof(gsw->vlans));
++	gsw_hw_init(gsw);
++
++	return 0;
++}
++
++static int gsw_get_vlan_enable(struct switch_dev *dev,
++			   const struct switch_attr *attr,
++			   struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++
++	val->value.i = gsw->global_vlan_enable;
++
++	return 0;
++}
++
++static int gsw_set_vlan_enable(struct switch_dev *dev,
++			   const struct switch_attr *attr,
++			   struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++
++	gsw->global_vlan_enable = val->value.i != 0;
++
++	return 0;
++}
++
++static unsigned gsw_get_pvid(struct mt7620_gsw *gsw, unsigned port)
++{
++	unsigned s, val;
++
++	s = GSW_VTIM_S * (port % 2);
++	val = gsw_r32(gsw, GSW_VTIM(port / 2));
++
++	return (val >> s) & GSW_VTIM_M;
++}
++
++static void gsw_set_pvid(struct mt7620_gsw *gsw, unsigned port, unsigned pvid)
++{
++	unsigned s, val;
++
++	s = GSW_VTIM_S * (port % 2);
++	val = gsw_r32(gsw, GSW_VTIM(port / 2));
++	val &= ~(GSW_VTIM_M << s);
++	val |= (pvid && GSW_VTIM_M) << s;
++	gsw_w32(gsw, val, GSW_VTIM(port / 2));
++}
++
++static int gsw_get_port_bool(struct switch_dev *dev,
++			 const struct switch_attr *attr,
++			 struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int idx = val->port_vlan;
++
++	if (idx < 0 || idx >= GSW_NUM_PORTS)
++		return -EINVAL;
++
++	switch (attr->id) {
++	case GSW_ATTR_PORT_UNTAG:
++		return gsw->ports[idx].untag;
++	}
++
++	return -EINVAL;
++}
++
++static int gsw_get_port_pvid(struct switch_dev *dev, int port, int *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++
++	if (port >= GSW_NUM_PORTS)
++		return -EINVAL;
++
++	*val = gsw_get_pvid(gsw, port);
++
++	return 0;
++}
++
++static int gsw_set_port_pvid(struct switch_dev *dev, int port, int val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++
++	if (port >= GSW_NUM_PORTS)
++		return -EINVAL;
++
++	gsw->ports[port].pvid = val;
++
++	return 0;
++}
++
++static void gsw_set_vtcr(struct switch_dev *dev, u32 vid)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int retry = 1000;
++
++	gsw_w32(gsw, 0x80000000 | (BIT(vid) & GSW_VLAN_VTCR_VID_M), GSW_VLAN_VTCR);
++	while (retry-- && (gsw_r32(gsw, GSW_VLAN_VTCR) & 0x80000000))
++		;
++}
++
++static void gsw_apply_vtcr(struct switch_dev *dev, u32 vid)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int retry = 1000;
++
++	gsw_w32(gsw, 0x80001000 | (BIT(vid) & GSW_VLAN_VTCR_VID_M), GSW_VLAN_VTCR);
++	while (retry-- && (gsw_r32(gsw, GSW_VLAN_VTCR) & 0x80000000))
++		;
++}
++
++static unsigned gsw_get_vlan_id(struct mt7620_gsw *gsw, unsigned vlan)
++{
++	unsigned s;
++	unsigned val;
++
++	s = GSW_VLAN_ID_VID_S * (vlan % 2);
++	val = gsw_r32(gsw, GSW_VLAN_ID(vlan / 2));
++	val = (val >> s) & GSW_VLAN_ID_VID_M;
++
++	return val;
++}
++
++static void gsw_set_vlan_id(struct mt7620_gsw *gsw, unsigned vlan, unsigned vid)
++{
++	unsigned s;
++	unsigned val;
++
++	s = GSW_VLAN_ID_VID_S * (vlan % 2);
++	val = gsw_r32(gsw, GSW_VLAN_ID(vlan / 2));
++	val &= ~(GSW_VLAN_ID_VID_M << s);
++	val |= (vid << s);
++	gsw_w32(gsw, val, GSW_VLAN_ID(vlan / 2));
++}
++
++static void gsw_vlan_tagging_enable(struct mt7620_gsw *gsw, unsigned vlan, unsigned enable)
++{
++	unsigned val;
++
++	val = gsw_r32(gsw, GSW_VAWD1);
++	if (enable)
++		val |= GSW_VAWD1_VTAG_EN;
++	else
++		val &= ~GSW_VAWD1_VTAG_EN;
++	gsw_w32(gsw, val, GSW_VAWD1);
++}
++
++static unsigned gsw_get_port_member(struct mt7620_gsw *gsw, unsigned vlan)
++{
++	unsigned val;
++
++	gsw_set_vtcr(&gsw->swdev, vlan);
++
++	val = gsw_r32(gsw, GSW_VAWD1);
++	val = (val >> GSW_VAWD1_PORTM_S) & GSW_VAWD1_PORTM_M;
++
++	return val;
++}
++
++static void gsw_set_port_member(struct mt7620_gsw *gsw, unsigned vlan, unsigned member)
++{
++	unsigned val;
++
++	val = gsw_r32(gsw, GSW_VAWD1);
++	val = ~(GSW_VAWD1_PORTM_M << GSW_VAWD1_PORTM_S);
++	val |= (member & GSW_VAWD1_PORTM_M) << GSW_VAWD1_PORTM_S;
++        gsw_w32(gsw, val, GSW_VAWD1);
++}
++
++static unsigned gsw_get_port_tag(struct mt7620_gsw *gsw, unsigned port)
++{
++	unsigned val;
++
++	val = gsw_r32(gsw, GSW_REG_PCR(port));
++	val >>= GSW_REG_PCR_EG_TAG_S;
++	val &= GSW_REG_PCR_EG_TAG_M;
++
++	return !!val;
++}
++
++static void gsw_set_port_untag(struct mt7620_gsw *gsw, unsigned port, unsigned untag)
++{
++	unsigned val;
++
++	val = gsw_r32(gsw, GSW_REG_PCR(port));
++	if (!untag)
++		untag = 0x2;
++	else
++		untag = 0;
++	val &= ~(GSW_REG_PCR_EG_TAG_M << GSW_REG_PCR_EG_TAG_S);
++	val |= (untag & GSW_REG_PCR_EG_TAG_M) << GSW_REG_PCR_EG_TAG_S;
++	gsw_w32(gsw, val, GSW_REG_PCR(port));
++}
++
++static int gsw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int vlan_idx = -1;
++	u32 member;
++	int i;
++
++	val->len = 0;
++
++	if (val->port_vlan < 0 || val->port_vlan >= GSW_NUM_VIDS)
++		return -EINVAL;
++
++	/* valid vlan? */
++	for (i = 0; i < GSW_NUM_VLANS; i++) {
++		if (gsw_get_vlan_id(gsw, i) != val->port_vlan)
++			continue;
++		member = gsw_get_port_member(gsw, i);
++		vlan_idx = i;
++		break;
++	}
++
++	if (vlan_idx == -1)
++		return -EINVAL;
++
++	for (i = 0; i < GSW_NUM_PORTS; i++) {
++		struct switch_port *p;
++		int port_mask = 1 << i;
++
++		if (!(member & port_mask))
++			continue;
++
++		p = &val->value.ports[val->len++];
++		p->id = i;
++		if (gsw_get_port_tag(gsw, i))
++			p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
++		else
++			p->flags = 0;
++	}
++
++	return 0;
++}
++
++static int gsw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int ports;
++	int vlan_idx = -1;
++	int i;
++
++	if (val->port_vlan < 0 || val->port_vlan >= GSW_NUM_VIDS ||
++			val->len > GSW_NUM_PORTS)
++		return -EINVAL;
++
++	/* one of the already defined vlans? */
++	for (i = 0; i < GSW_NUM_VLANS; i++) {
++		if (gsw->vlans[i].vid == val->port_vlan &&
++		    gsw->vlans[i].ports) {
++			vlan_idx = i;
++			break;
++		}
++	}
++
++	/* select a free slot */
++	for (i = 0; vlan_idx == -1 && i < GSW_NUM_VLANS; i++) {
++		if (!gsw->vlans[i].ports)
++			vlan_idx = i;
++	}
++
++	/* bail if all slots are in use */
++	if (vlan_idx == -1)
++		return -EINVAL;
++
++	ports = 0;
++	for (i = 0; i < val->len; i++) {
++		struct switch_port *p = &val->value.ports[i];
++		int port_mask = 1 << p->id;
++		bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
++
++		if (p->id >= GSW_NUM_PORTS)
++			return -EINVAL;
++
++		ports |= port_mask;
++		gsw->ports[p->id].untag = untagged;
++	}
++	gsw->vlans[vlan_idx].ports = ports;
++	if (!ports)
++		gsw->vlans[vlan_idx].vid = 0xfff;
++	else
++		gsw->vlans[vlan_idx].vid = val->port_vlan;
++
++	return 0;
++}
++
++static int gsw_apply_config(struct switch_dev *dev)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int i;
++
++	for (i = 0; i < GSW_NUM_VLANS; i++) {
++		gsw_set_vtcr(&gsw->swdev, i);
++		if (gsw->global_vlan_enable) {
++			gsw_set_vlan_id(gsw, i, gsw->vlans[i].vid);
++			gsw_set_port_member(gsw, i, gsw->vlans[i].ports);
++			gsw_vlan_tagging_enable(gsw, i, 1);
++		} else {
++			gsw_set_vlan_id(gsw, i, 0xfff);
++			gsw_set_port_member(gsw, i, 0);
++			gsw_vlan_tagging_enable(gsw, i, 0);
++		}
++		gsw_apply_vtcr(&gsw->swdev, i);
++	}
++
++	for (i = 0; i < GSW_NUM_PORTS; i++) {
++		if (gsw->global_vlan_enable) {
++			gsw_set_port_untag(gsw, i, !gsw->ports[i].untag);
++			gsw_set_pvid(gsw, i, gsw->ports[i].pvid);
++		} else {
++			gsw_set_port_untag(gsw, i, 0);
++			gsw_set_pvid(gsw, i, 0);
++		}
++	}
++
++	if (!gsw->global_vlan_enable)
++		gsw_set_vlan_id(gsw, 0, 0);
++
++	return 0;
++}
++
++static int gsw_get_port_link(struct switch_dev *dev,
++			 int port,
++			 struct switch_port_link *link)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	u32 status;
++
++	if (port < 0 || port >= GSW_NUM_PORTS)
++		return -EINVAL;
++
++	status = gsw_r32(gsw, GSW_REG_PORT_STATUS(port));
++	link->link = status & 0x1;
++	link->duplex = (status >> 1) & 1;
++
++	switch ((status >> 2) & 0x3) {
++	case 0:
++		link->speed = SWITCH_PORT_SPEED_10;
++		break;
++	case 1:
++		link->speed = SWITCH_PORT_SPEED_100;
++		break;
++	case 2:
++	case 3: // forced gige speed can be 2 or 3
++		link->speed = SWITCH_PORT_SPEED_1000;
++		break;
++	}
++
++	return 0;
++}
++
++static int gsw_set_port_bool(struct switch_dev *dev,
++			 const struct switch_attr *attr,
++			 struct switch_val *val)
++{
++	struct mt7620_gsw *gsw = container_of(dev, struct mt7620_gsw, swdev);
++	int idx = val->port_vlan;
++
++	if (idx < 0 || idx >= GSW_NUM_PORTS ||
++	    val->value.i < 0 || val->value.i > 1)
++		return -EINVAL;
++
++	switch (attr->id) {
++	case GSW_ATTR_PORT_UNTAG:
++		gsw->ports[idx].untag = val->value.i;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static const struct switch_attr gsw_global[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "enable_vlan",
++		.description = "VLAN mode (1:enabled)",
++		.max = 1,
++		.id = GSW_ATTR_ENABLE_VLAN,
++		.get = gsw_get_vlan_enable,
++		.set = gsw_set_vlan_enable,
++	},
++};
++
++static const struct switch_attr gsw_port[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "untag",
++		.description = "Untag (1:strip outgoing vlan tag)",
++		.max = 1,
++		.id = GSW_ATTR_PORT_UNTAG,
++		.get = gsw_get_port_bool,
++		.set = gsw_set_port_bool,
++	},
++};
++
++static const struct switch_attr gsw_vlan[] = {
++};
++
++static const struct switch_dev_ops gsw_ops = {
++	.attr_global = {
++		.attr = gsw_global,
++		.n_attr = ARRAY_SIZE(gsw_global),
++	},
++	.attr_port = {
++		.attr = gsw_port,
++		.n_attr = ARRAY_SIZE(gsw_port),
++	},
++	.attr_vlan = {
++		.attr = gsw_vlan,
++		.n_attr = ARRAY_SIZE(gsw_vlan),
++	},
++	.get_vlan_ports = gsw_get_vlan_ports,
++	.set_vlan_ports = gsw_set_vlan_ports,
++	.get_port_pvid = gsw_get_port_pvid,
++	.set_port_pvid = gsw_set_port_pvid,
++	.get_port_link = gsw_get_port_link,
++	.apply_config = gsw_apply_config,
++	.reset_switch = gsw_reset_switch,
++};
++
++void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac)
++{
++	struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++	unsigned long flags;
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	gsw_w32(gsw, (mac[0] << 8) | mac[1], GSW_REG_SMACCR1);
++	gsw_w32(gsw, (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++		GSW_REG_SMACCR0);
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static struct of_device_id gsw_match[] = {
++	{ .compatible = "ralink,mt7620a-gsw" },
++	{}
++};
++
++int mt7620_gsw_probe(struct fe_priv *priv)
++{
++	struct mt7620_gsw *gsw;
++	struct device_node *np;
++	struct switch_dev *swdev;
++	const char *port4 = NULL;
++
++	np = of_find_matching_node(NULL, gsw_match);
++	if (!np) {
++		dev_err(priv->device, "no gsw node found\n");
++		return -EINVAL;
++	}
++	np = of_node_get(np);
++
++	gsw = devm_kzalloc(priv->device, sizeof(struct mt7620_gsw), GFP_KERNEL);
++	if (!gsw) {
++		dev_err(priv->device, "no gsw memory for private data\n");
++		return -ENOMEM;
++	}
++
++	gsw->irq = irq_of_parse_and_map(np, 0);
++	if (!gsw->irq) {
++		dev_err(priv->device, "no gsw irq resource found\n");
++		return -ENOMEM;
++	}
++
++	gsw->base = of_iomap(np, 0);
++	if (!gsw->base) {
++		dev_err(priv->device, "gsw ioremap failed\n");
++	}
++
++	gsw->dev = priv->device;
++	priv->soc->swpriv = gsw;
++
++	swdev = &gsw->swdev;
++	swdev->of_node = np;
++	swdev->name = "mt7620a-gsw";
++	swdev->alias = "mt7620x";
++	swdev->cpu_port = GSW_PORT6;
++	swdev->ports = GSW_NUM_PORTS;
++	swdev->vlans = GSW_NUM_VLANS;
++	swdev->ops = &gsw_ops;
++
++	if (register_switch(swdev, NULL))
++		dev_err(priv->device, "register_switch failed\n");
++
++	of_property_read_string(np, "ralink,port4", &port4);
++	if (port4 && !strcmp(port4, "ephy"))
++		gsw->port4 = PORT4_EPHY;
++	else if (port4 && !strcmp(port4, "gmac"))
++		gsw->port4 = PORT4_EXT;
++	else
++		WARN_ON(port4);
++
++	gsw_hw_init(gsw);
++
++	gsw_w32(gsw, ~PORT_IRQ_ST_CHG, GSW_REG_IMR);
++	request_irq(gsw->irq, gsw_interrupt, 0, "gsw", priv);
++
++	return 0;
++}
+diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.h b/drivers/net/ethernet/ralink/gsw_mt7620a.h
+new file mode 100644
+index 0000000..fd4add5
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.h
+@@ -0,0 +1,29 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_GSW_MT7620_H__
++#define _RALINK_GSW_MT7620_H__
++
++extern int mt7620_gsw_probe(struct fe_priv *priv);
++extern void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac);
++extern int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++extern int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
++extern void mt7620_mdio_link_adjust(struct fe_priv *priv, int port);
++extern void mt7620_port_init(struct fe_priv *priv, struct device_node *np);
++extern int mt7620a_has_carrier(struct fe_priv *priv);
++
++#endif
+diff --git a/drivers/net/ethernet/ralink/mdio.c b/drivers/net/ethernet/ralink/mdio.c
+new file mode 100644
+index 0000000..b265c75
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio.c
+@@ -0,0 +1,245 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/phy.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio.h"
++
++static int fe_mdio_reset(struct mii_bus *bus)
++{
++	/* TODO */
++	return 0;
++}
++
++static void fe_phy_link_adjust(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	unsigned long flags;
++	int i;
++
++	spin_lock_irqsave(&priv->phy->lock, flags);
++	for (i = 0; i < 8; i++) {
++		if (priv->phy->phy_node[i]) {
++			struct phy_device *phydev = priv->phy->phy[i];
++			int status_change = 0;
++
++			if (phydev->link)
++				if (priv->phy->duplex[i] != phydev->duplex ||
++						priv->phy->speed[i] != phydev->speed)
++					status_change = 1;
++
++			if (phydev->link != priv->link[i])
++				status_change = 1;
++
++			switch (phydev->speed) {
++			case SPEED_1000:
++			case SPEED_100:
++			case SPEED_10:
++				priv->link[i] = phydev->link;
++				priv->phy->duplex[i] = phydev->duplex;
++				priv->phy->speed[i] = phydev->speed;
++
++				if (status_change && priv->soc->mdio_adjust_link)
++					priv->soc->mdio_adjust_link(priv, i);
++				break;
++			}
++		}
++	}
++	spin_unlock_irqrestore(&priv->phy->lock, flags);
++}
++
++int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node)
++{
++	const __be32 *_port = NULL;
++	struct phy_device *phydev;
++	int phy_mode, port;
++
++	_port = of_get_property(phy_node, "reg", NULL);
++
++	if (!_port || (be32_to_cpu(*_port) >= 8)) {
++		pr_err("%s: invalid port id\n", phy_node->name);
++		return -EINVAL;
++	}
++	port = be32_to_cpu(*_port);
++	phy_mode = of_get_phy_mode(phy_node);
++	if (phy_mode < 0) {
++		dev_err(priv->device, "incorrect phy-mode %d\n", phy_mode);
++		priv->phy->phy_node[port] = NULL;
++		return -EINVAL;
++	}
++
++	phydev = of_phy_connect(priv->netdev, phy_node, fe_phy_link_adjust,
++				0, phy_mode);
++	if (IS_ERR(phydev)) {
++		dev_err(priv->device, "could not connect to PHY\n");
++		priv->phy->phy_node[port] = NULL;
++		return PTR_ERR(phydev);
++	}
++
++	phydev->supported &= PHY_GBIT_FEATURES;
++	phydev->advertising = phydev->supported;
++	phydev->no_auto_carrier_off = 1;
++
++	dev_info(priv->device,
++		 "connected port %d to PHY at %s [uid=%08x, driver=%s]\n",
++		 port, dev_name(&phydev->dev), phydev->phy_id,
++		 phydev->drv->name);
++
++	priv->phy->phy[port] = phydev;
++	priv->link[port] = 0;
++
++	return 0;
++}
++
++static int fe_phy_connect(struct fe_priv *priv)
++{
++	return 0;
++}
++
++static void fe_phy_disconnect(struct fe_priv *priv)
++{
++	unsigned long flags;
++	int i;
++
++	for (i = 0; i < 8; i++)
++		if (priv->phy->phy_fixed[i]) {
++			spin_lock_irqsave(&priv->phy->lock, flags);
++			priv->link[i] = 0;
++			if (priv->soc->mdio_adjust_link)
++				priv->soc->mdio_adjust_link(priv, i);
++			spin_unlock_irqrestore(&priv->phy->lock, flags);
++		} else if (priv->phy->phy[i]) {
++			phy_disconnect(priv->phy->phy[i]);
++		}
++}
++
++static void fe_phy_start(struct fe_priv *priv)
++{
++	unsigned long flags;
++	int i;
++
++	for (i = 0; i < 8; i++) {
++		if (priv->phy->phy_fixed[i]) {
++			spin_lock_irqsave(&priv->phy->lock, flags);
++			priv->link[i] = 1;
++			if (priv->soc->mdio_adjust_link)
++				priv->soc->mdio_adjust_link(priv, i);
++			spin_unlock_irqrestore(&priv->phy->lock, flags);
++		} else if (priv->phy->phy[i]) {
++			phy_start(priv->phy->phy[i]);
++		}
++	}
++}
++
++static void fe_phy_stop(struct fe_priv *priv)
++{
++	unsigned long flags;
++	int i;
++
++	for (i = 0; i < 8; i++)
++		if (priv->phy->phy_fixed[i]) {
++			spin_lock_irqsave(&priv->phy->lock, flags);
++			priv->link[i] = 0;
++			if (priv->soc->mdio_adjust_link)
++				priv->soc->mdio_adjust_link(priv, i);
++			spin_unlock_irqrestore(&priv->phy->lock, flags);
++		} else if (priv->phy->phy[i]) {
++			phy_stop(priv->phy->phy[i]);
++		}
++}
++
++static struct fe_phy phy_ralink = {
++	.connect = fe_phy_connect,
++	.disconnect = fe_phy_disconnect,
++	.start = fe_phy_start,
++	.stop = fe_phy_stop,
++};
++
++int fe_mdio_init(struct fe_priv *priv)
++{
++	struct device_node *mii_np;
++	int err;
++
++	if (!priv->soc->mdio_read || !priv->soc->mdio_write)
++		return 0;
++
++	spin_lock_init(&phy_ralink.lock);
++	priv->phy = &phy_ralink;
++
++	mii_np = of_get_child_by_name(priv->device->of_node, "mdio-bus");
++	if (!mii_np) {
++		dev_err(priv->device, "no %s child node found", "mdio-bus");
++		return -ENODEV;
++	}
++
++	if (!of_device_is_available(mii_np)) {
++		err = 0;
++		goto err_put_node;
++	}
++
++	priv->mii_bus = mdiobus_alloc();
++	if (priv->mii_bus == NULL) {
++		err = -ENOMEM;
++		goto err_put_node;
++	}
++
++	priv->mii_bus->name = "mdio";
++	priv->mii_bus->read = priv->soc->mdio_read;
++	priv->mii_bus->write = priv->soc->mdio_write;
++	priv->mii_bus->reset = fe_mdio_reset;
++	priv->mii_bus->irq = priv->mii_irq;
++	priv->mii_bus->priv = priv;
++	priv->mii_bus->parent = priv->device;
++
++	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name);
++	err = of_mdiobus_register(priv->mii_bus, mii_np);
++	if (err)
++		goto err_free_bus;
++
++	return 0;
++
++err_free_bus:
++	kfree(priv->mii_bus);
++err_put_node:
++	of_node_put(mii_np);
++	priv->mii_bus = NULL;
++	return err;
++}
++
++void fe_mdio_cleanup(struct fe_priv *priv)
++{
++	if (!priv->mii_bus)
++		return;
++
++	mdiobus_unregister(priv->mii_bus);
++	of_node_put(priv->mii_bus->dev.of_node);
++	kfree(priv->mii_bus);
++}
+diff --git a/drivers/net/ethernet/ralink/mdio.h b/drivers/net/ethernet/ralink/mdio.h
+new file mode 100644
+index 0000000..c3910a0
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio.h
+@@ -0,0 +1,29 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_MDIO_H__
++#define _RALINK_MDIO_H__
++
++#ifdef CONFIG_NET_RALINK_MDIO
++extern int fe_mdio_init(struct fe_priv *priv);
++extern void fe_mdio_cleanup(struct fe_priv *priv);
++extern int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node);
++#else
++static inline int fe_mdio_init(struct fe_priv *priv) { return 0; }
++static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
++#endif
++#endif
+diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.c b/drivers/net/ethernet/ralink/mdio_rt2880.c
+new file mode 100644
+index 0000000..54dbc53
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio_rt2880.c
+@@ -0,0 +1,163 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/phy.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio_rt2880.h"
++
++#define FE_MDIO_RETRY	1000
++
++static unsigned char *rt2880_speed_str(struct fe_priv *priv)
++{
++	switch (priv->phy->speed[0]) {
++	case SPEED_1000:
++		return "1000";
++	case SPEED_100:
++		return "100";
++	case SPEED_10:
++		return "10";
++	}
++
++	return "?";
++}
++
++void rt2880_mdio_link_adjust(struct fe_priv *priv)
++{
++	u32 mdio_cfg;
++
++	if (!priv->link[0]) {
++		netif_carrier_off(priv->netdev);
++		netdev_info(priv->netdev, "link down\n");
++		return;
++	}
++
++	mdio_cfg = FE_MDIO_CFG_TX_CLK_SKEW_200 |
++		   FE_MDIO_CFG_RX_CLK_SKEW_200 |
++		   FE_MDIO_CFG_GP1_FRC_EN;
++
++	if (priv->phy->duplex[0] == DUPLEX_FULL)
++		mdio_cfg |= FE_MDIO_CFG_GP1_DUPLEX;
++
++	if (priv->phy->tx_fc)
++		mdio_cfg |= FE_MDIO_CFG_GP1_FC_TX;
++
++	if (priv->phy->rx_fc)
++		mdio_cfg |= FE_MDIO_CFG_GP1_FC_RX;
++
++	switch (priv->phy->speed[0]) {
++	case SPEED_10:
++		mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_10;
++		break;
++	case SPEED_100:
++		mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_100;
++		break;
++	case SPEED_1000:
++		mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_1000;
++		break;
++	default:
++		BUG();
++	}
++
++	fe_w32(mdio_cfg, FE_MDIO_CFG);
++
++	netif_carrier_on(priv->netdev);
++	netdev_info(priv->netdev, "link up (%sMbps/%s duplex)\n",
++		    rt2880_speed_str(priv),
++		    (DUPLEX_FULL == priv->phy->duplex[0]) ? "Full" : "Half");
++}
++
++static int rt2880_mdio_wait_ready(struct fe_priv *priv)
++{
++	int retries;
++
++	retries = FE_MDIO_RETRY;
++	while (1) {
++		u32 t;
++
++		t = fe_r32(FE_MDIO_ACCESS);
++		if ((t & (0x1 << 31)) == 0)
++			return 0;
++
++		if (retries-- == 0)
++			break;
++
++		udelay(1);
++	}
++
++	dev_err(priv->device, "MDIO operation timed out\n");
++	return -ETIMEDOUT;
++}
++
++int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++	struct fe_priv *priv = bus->priv;
++	int err;
++	u32 t;
++
++	err = rt2880_mdio_wait_ready(priv);
++	if (err)
++		return 0xffff;
++
++	t = (phy_addr << 24) | (phy_reg << 16);
++	fe_w32(t, FE_MDIO_ACCESS);
++	t |= (1 << 31);
++	fe_w32(t, FE_MDIO_ACCESS);
++
++	err = rt2880_mdio_wait_ready(priv);
++	if (err)
++		return 0xffff;
++
++	pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
++		phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
++
++	return fe_r32(FE_MDIO_ACCESS) & 0xffff;
++}
++
++int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
++{
++	struct fe_priv *priv = bus->priv;
++	int err;
++	u32 t;
++
++	pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
++		phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
++
++	err = rt2880_mdio_wait_ready(priv);
++	if (err)
++		return err;
++
++	t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val;
++	fe_w32(t, FE_MDIO_ACCESS);
++	t |= (1 << 31);
++	fe_w32(t, FE_MDIO_ACCESS);
++
++	return rt2880_mdio_wait_ready(priv);
++}
+diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.h b/drivers/net/ethernet/ralink/mdio_rt2880.h
+new file mode 100644
+index 0000000..c9ac0fe
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio_rt2880.h
+@@ -0,0 +1,25 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_MDIO_RT2880_H__
++#define _RALINK_MDIO_RT2880_H__
++
++void rt2880_mdio_link_adjust(struct fe_priv *priv);
++int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
++int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++
++#endif
+diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.c b/drivers/net/ethernet/ralink/ralink_soc_eth.c
+new file mode 100644
+index 0000000..04e82eb
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
+@@ -0,0 +1,759 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++#include <linux/if_vlan.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "esw_rt3052.h"
++#include "mdio.h"
++
++#define TX_TIMEOUT		(20 * HZ / 100)
++#define	MAX_RX_LENGTH		1536
++
++static const u32 fe_reg_table_default[FE_REG_COUNT] = {
++	[FE_REG_PDMA_GLO_CFG] = FE_PDMA_GLO_CFG,
++	[FE_REG_PDMA_RST_CFG] = FE_PDMA_RST_CFG,
++	[FE_REG_DLY_INT_CFG] = FE_DLY_INT_CFG,
++	[FE_REG_TX_BASE_PTR0] = FE_TX_BASE_PTR0,
++	[FE_REG_TX_MAX_CNT0] = FE_TX_MAX_CNT0,
++	[FE_REG_TX_CTX_IDX0] = FE_TX_CTX_IDX0,
++	[FE_REG_RX_BASE_PTR0] = FE_RX_BASE_PTR0,
++	[FE_REG_RX_MAX_CNT0] = FE_RX_MAX_CNT0,
++	[FE_REG_RX_CALC_IDX0] = FE_RX_CALC_IDX0,
++	[FE_REG_FE_INT_ENABLE] = FE_FE_INT_ENABLE,
++	[FE_REG_FE_INT_STATUS] = FE_FE_INT_STATUS,
++	[FE_REG_FE_DMA_VID_BASE] = FE_DMA_VID0,
++};
++
++static const u32 *fe_reg_table = fe_reg_table_default;
++
++static void __iomem *fe_base = 0;
++
++void fe_w32(u32 val, unsigned reg)
++{
++	__raw_writel(val, fe_base + reg);
++}
++
++u32 fe_r32(unsigned reg)
++{
++	return __raw_readl(fe_base + reg);
++}
++
++static inline void fe_reg_w32(u32 val, enum fe_reg reg)
++{
++	fe_w32(val, fe_reg_table[reg]);
++}
++
++static inline u32 fe_reg_r32(enum fe_reg reg)
++{
++	return fe_r32(fe_reg_table[reg]);
++}
++
++static inline void fe_int_disable(u32 mask)
++{
++	fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) & ~mask,
++		     FE_REG_FE_INT_ENABLE);
++	/* flush write */
++	fe_reg_r32(FE_REG_FE_INT_ENABLE);
++}
++
++static inline void fe_int_enable(u32 mask)
++{
++	fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) | mask,
++		     FE_REG_FE_INT_ENABLE);
++	/* flush write */
++	fe_reg_r32(FE_REG_FE_INT_ENABLE);
++}
++
++static inline void fe_hw_set_macaddr(struct fe_priv *priv, unsigned char *mac)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	fe_w32((mac[0] << 8) | mac[1], FE_GDMA1_MAC_ADRH);
++	fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++		     FE_GDMA1_MAC_ADRL);
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static int fe_set_mac_address(struct net_device *dev, void *p)
++{
++	int ret = eth_mac_addr(dev, p);
++
++	if (!ret) {
++		struct fe_priv *priv = netdev_priv(dev);
++
++		if (priv->soc->set_mac)
++			priv->soc->set_mac(priv, dev->dev_addr);
++		else
++			fe_hw_set_macaddr(priv, p);
++	}
++
++	return ret;
++}
++
++static struct sk_buff* fe_alloc_skb(struct fe_priv *priv)
++{
++	struct sk_buff *skb;
++
++	skb = netdev_alloc_skb(priv->netdev, MAX_RX_LENGTH + NET_IP_ALIGN);
++	if (!skb)
++		return NULL;
++
++	skb_reserve(skb, NET_IP_ALIGN);
++
++	return skb;
++}
++
++static int fe_alloc_rx(struct fe_priv *priv)
++{
++	int size = NUM_DMA_DESC * sizeof(struct fe_rx_dma);
++	int i;
++
++	priv->rx_dma = dma_alloc_coherent(&priv->netdev->dev, size,
++					&priv->rx_phys, GFP_ATOMIC);
++	if (!priv->rx_dma)
++		return -ENOMEM;
++
++	memset(priv->rx_dma, 0, size);
++
++	for (i = 0; i < NUM_DMA_DESC; i++) {
++		priv->rx_skb[i] = fe_alloc_skb(priv);
++		if (!priv->rx_skb[i])
++			return -ENOMEM;
++	}
++
++	for (i = 0; i < NUM_DMA_DESC; i++) {
++		dma_addr_t dma_addr = dma_map_single(&priv->netdev->dev,
++						priv->rx_skb[i]->data,
++						MAX_RX_LENGTH,
++						DMA_FROM_DEVICE);
++		priv->rx_dma[i].rxd1 = (unsigned int) dma_addr;
++
++		if (priv->soc->rx_dma)
++			priv->soc->rx_dma(priv, i, MAX_RX_LENGTH);
++		else
++			priv->rx_dma[i].rxd2 = RX_DMA_LSO;
++	}
++	wmb();
++
++	fe_reg_w32(priv->rx_phys, FE_REG_RX_BASE_PTR0);
++	fe_reg_w32(NUM_DMA_DESC, FE_REG_RX_MAX_CNT0);
++	fe_reg_w32((NUM_DMA_DESC - 1), FE_REG_RX_CALC_IDX0);
++	fe_reg_w32(FE_PST_DRX_IDX0, FE_REG_PDMA_RST_CFG);
++
++	return 0;
++}
++
++static int fe_alloc_tx(struct fe_priv *priv)
++{
++	int size = NUM_DMA_DESC * sizeof(struct fe_tx_dma);
++	int i;
++
++	priv->tx_free_idx = 0;
++
++	priv->tx_dma = dma_alloc_coherent(&priv->netdev->dev, size,
++					&priv->tx_phys, GFP_ATOMIC);
++	if (!priv->tx_dma)
++		return -ENOMEM;
++
++	memset(priv->tx_dma, 0, size);
++
++	for (i = 0; i < NUM_DMA_DESC; i++) {
++		if (priv->soc->tx_dma) {
++			priv->soc->tx_dma(priv, i, 0);
++			continue;
++		}
++
++		priv->tx_dma[i].txd2 = TX_DMA_LSO | TX_DMA_DONE;
++		priv->tx_dma[i].txd4 = TX_DMA_QN(3) | TX_DMA_PN(1);
++	}
++
++	fe_reg_w32(priv->tx_phys, FE_REG_TX_BASE_PTR0);
++	fe_reg_w32(NUM_DMA_DESC, FE_REG_TX_MAX_CNT0);
++	fe_reg_w32(0, FE_REG_TX_CTX_IDX0);
++	fe_reg_w32(FE_PST_DTX_IDX0, FE_REG_PDMA_RST_CFG);
++
++	return 0;
++}
++
++static void fe_free_dma(struct fe_priv *priv)
++{
++	int i;
++
++	for (i = 0; i < NUM_DMA_DESC; i++) {
++		if (priv->rx_skb[i]) {
++			dma_unmap_single(&priv->netdev->dev, priv->rx_dma[i].rxd1,
++						MAX_RX_LENGTH, DMA_FROM_DEVICE);
++			dev_kfree_skb_any(priv->rx_skb[i]);
++			priv->rx_skb[i] = NULL;
++		}
++
++		if (priv->tx_skb[i]) {
++			dev_kfree_skb_any(priv->tx_skb[i]);
++			priv->tx_skb[i] = NULL;
++		}
++	}
++
++	if (priv->rx_dma) {
++		int size = NUM_DMA_DESC * sizeof(struct fe_rx_dma);
++		dma_free_coherent(&priv->netdev->dev, size, priv->rx_dma,
++					priv->rx_phys);
++	}
++
++	if (priv->tx_dma) {
++		int size = NUM_DMA_DESC * sizeof(struct fe_tx_dma);
++		dma_free_coherent(&priv->netdev->dev, size, priv->tx_dma,
++					priv->tx_phys);
++	}
++
++	netdev_reset_queue(priv->netdev);
++}
++
++static int fe_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	dma_addr_t mapped_addr;
++	u32 tx_next;
++	u32 tx;
++
++	if (priv->soc->min_pkt_len) {
++		if (skb->len < priv->soc->min_pkt_len) {
++			if (skb_padto(skb, priv->soc->min_pkt_len)) {
++				printk(KERN_ERR
++				       "fe_eth: skb_padto failed\n");
++				kfree_skb(skb);
++				return 0;
++			}
++			skb_put(skb, priv->soc->min_pkt_len - skb->len);
++		}
++	}
++
++	dev->trans_start = jiffies;
++	mapped_addr = dma_map_single(&priv->netdev->dev, skb->data,
++				skb->len, DMA_TO_DEVICE);
++
++	spin_lock(&priv->page_lock);
++
++	tx = fe_reg_r32(FE_REG_TX_CTX_IDX0);
++	tx_next = (tx + 1) % NUM_DMA_DESC;
++
++	if ((priv->tx_skb[tx]) || (priv->tx_skb[tx_next]) ||
++			!(priv->tx_dma[tx].txd2 & TX_DMA_DONE) ||
++			!(priv->tx_dma[tx_next].txd2 & TX_DMA_DONE))
++	{
++		spin_unlock(&priv->page_lock);
++		dev->stats.tx_dropped++;
++		kfree_skb(skb);
++
++		return NETDEV_TX_OK;
++	}
++
++	priv->tx_skb[tx] = skb;
++	priv->tx_dma[tx].txd1 = (unsigned int) mapped_addr;
++	wmb();
++	if (priv->soc->tx_dma)
++		priv->soc->tx_dma(priv, tx, skb->len);
++	else
++		priv->tx_dma[tx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(skb->len);
++
++	if (skb->ip_summed == CHECKSUM_PARTIAL)
++		priv->tx_dma[tx].txd4 |= TX_DMA_CHKSUM;
++	else
++		priv->tx_dma[tx].txd4 &= ~TX_DMA_CHKSUM;
++
++        if (fe_reg_table[FE_REG_FE_DMA_VID_BASE] && vlan_tx_tag_present(skb))
++		priv->tx_dma[tx].txd4 |= 0x80 | (vlan_tx_tag_get(skb) >> 13) << 4 | (vlan_tx_tag_get(skb) & 0xF);
++	else
++		priv->tx_dma[tx].txd4 &= ~0x80;
++
++	dev->stats.tx_packets++;
++	dev->stats.tx_bytes += skb->len;
++
++	fe_reg_w32(tx_next, FE_REG_TX_CTX_IDX0);
++	netdev_sent_queue(dev, skb->len);
++
++	spin_unlock(&priv->page_lock);
++
++	return NETDEV_TX_OK;
++}
++
++static int fe_poll_rx(struct napi_struct *napi, int budget)
++{
++	struct fe_priv *priv = container_of(napi, struct fe_priv, rx_napi);
++	int idx = fe_reg_r32(FE_REG_RX_CALC_IDX0);
++	unsigned long flags;
++	int complete = 0;
++	int rx = 0;
++
++	while ((rx < budget) && !complete) {
++
++		idx = (idx + 1) % NUM_DMA_DESC;
++
++		if (priv->rx_dma[idx].rxd2 & RX_DMA_DONE) {
++			struct sk_buff *new_skb = fe_alloc_skb(priv);
++
++			if (new_skb) {
++				int pktlen = RX_DMA_PLEN0(priv->rx_dma[idx].rxd2);
++				dma_addr_t dma_addr;
++
++				dma_unmap_single(&priv->netdev->dev, priv->rx_dma[idx].rxd1,
++						MAX_RX_LENGTH, DMA_FROM_DEVICE);
++
++				skb_put(priv->rx_skb[idx], pktlen);
++				priv->rx_skb[idx]->dev = priv->netdev;
++				priv->rx_skb[idx]->protocol = eth_type_trans(priv->rx_skb[idx], priv->netdev);
++				if (priv->rx_dma[idx].rxd4 & priv->soc->checksum_bit)
++					priv->rx_skb[idx]->ip_summed = CHECKSUM_UNNECESSARY;
++				else
++					priv->rx_skb[idx]->ip_summed = CHECKSUM_NONE;
++				priv->netdev->stats.rx_packets++;
++				priv->netdev->stats.rx_bytes += pktlen;
++				netif_rx(priv->rx_skb[idx]);
++
++				priv->rx_skb[idx] = new_skb;
++
++				dma_addr = dma_map_single(&priv->netdev->dev,
++						  new_skb->data,
++						  MAX_RX_LENGTH,
++						  DMA_FROM_DEVICE);
++				priv->rx_dma[idx].rxd1 = (unsigned int) dma_addr;
++				wmb();
++			} else {
++				priv->netdev->stats.rx_dropped++;
++			}
++
++			if (priv->soc->rx_dma)
++				priv->soc->rx_dma(priv, idx, MAX_RX_LENGTH);
++			else
++				priv->rx_dma[idx].rxd2 = RX_DMA_LSO;
++			fe_reg_w32(idx, FE_REG_RX_CALC_IDX0);
++			rx++;
++		} else {
++			complete = 1;
++		}
++	}
++
++	if (complete || !rx) {
++		napi_complete(&priv->rx_napi);
++		spin_lock_irqsave(&priv->page_lock, flags);
++		fe_int_enable(priv->soc->rx_dly_int);
++		spin_unlock_irqrestore(&priv->page_lock, flags);
++	}
++
++	return rx;
++}
++
++static int fe_poll_tx(struct napi_struct *napi, int budget)
++{
++	struct fe_priv *priv = container_of(napi, struct fe_priv, tx_napi);
++	unsigned int bytes_compl = 0;
++	unsigned int pkts_compl = 0;
++	struct netdev_queue *txq;
++	unsigned long flags;
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	while (pkts_compl < budget) {
++		struct fe_tx_dma *txd;
++
++		txd = &priv->tx_dma[priv->tx_free_idx];
++
++		if (!(txd->txd2 & TX_DMA_DONE) || !(priv->tx_skb[priv->tx_free_idx]))
++			break;
++
++		bytes_compl += priv->tx_skb[priv->tx_free_idx]->len;
++		pkts_compl++;
++
++		dev_kfree_skb_irq(priv->tx_skb[priv->tx_free_idx]);
++		priv->tx_skb[priv->tx_free_idx] = NULL;
++		priv->tx_free_idx++;
++		if (priv->tx_free_idx >= NUM_DMA_DESC)
++			priv->tx_free_idx = 0;
++	}
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++
++	txq = netdev_get_tx_queue(priv->netdev, 0);
++	if (netif_tx_queue_stopped(txq))
++		netif_tx_start_queue(txq);
++
++	napi_complete(napi);
++	netdev_completed_queue(priv->netdev, pkts_compl, bytes_compl);
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	fe_int_enable(priv->soc->tx_dly_int);
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++
++	return pkts_compl;
++}
++
++static void fe_tx_timeout(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++
++	priv->netdev->stats.tx_errors++;
++	netdev_err(dev, "transmit timed out, waking up the queue\n");
++	netif_wake_queue(dev);
++}
++
++static irqreturn_t fe_handle_irq(int irq, void *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	unsigned int status;
++	unsigned int mask;
++
++	status = fe_reg_r32(FE_REG_FE_INT_STATUS);
++	mask = fe_reg_r32(FE_REG_FE_INT_ENABLE);
++
++	if (!(status & mask))
++		return IRQ_NONE;
++
++	if (status & priv->soc->rx_dly_int) {
++		fe_int_disable(priv->soc->rx_dly_int);
++		napi_schedule(&priv->rx_napi);
++	}
++
++	if (status & priv->soc->tx_dly_int) {
++		fe_int_disable(priv->soc->tx_dly_int);
++		napi_schedule(&priv->tx_napi);
++	}
++
++	fe_reg_w32(status, FE_REG_FE_INT_STATUS);
++
++	return IRQ_HANDLED;
++}
++
++static int fe_hw_init(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	int err, i;
++
++	err = devm_request_irq(priv->device, dev->irq, fe_handle_irq, 0,
++				dev_name(priv->device), dev);
++	if (err)
++		return err;
++
++	err = fe_alloc_rx(priv);
++	if (!err)
++		err = fe_alloc_tx(priv);
++	if (err)
++		return err;
++
++	if (priv->soc->set_mac)
++		priv->soc->set_mac(priv, dev->dev_addr);
++	else
++		fe_hw_set_macaddr(priv, dev->dev_addr);
++
++	fe_reg_w32(FE_DELAY_INIT, FE_REG_DLY_INT_CFG);
++
++	fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
++
++
++	if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
++		for (i = 0; i < 16; i += 2)
++			fe_w32((i + 1) << 16 | i, fe_reg_table[FE_REG_FE_DMA_VID_BASE] + (i * 4));
++
++	if (priv->soc->fwd_config) {
++		priv->soc->fwd_config(priv);
++	} else {
++		unsigned long sysclk = priv->sysclk;
++
++		if (!sysclk) {
++			netdev_err(dev, "unable to get clock\n");
++			return -EINVAL;
++		}
++
++		sysclk /= FE_US_CYC_CNT_DIVISOR;
++		sysclk <<= FE_US_CYC_CNT_SHIFT;
++
++		fe_w32((fe_r32(FE_FE_GLO_CFG) &
++			~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) | priv->sysclk,
++			FE_FE_GLO_CFG);
++
++		fe_w32(fe_r32(FE_GDMA1_FWD_CFG) & ~0xffff, FE_GDMA1_FWD_CFG);
++		fe_w32(fe_r32(FE_GDMA1_FWD_CFG) | (FE_GDM1_ICS_EN | FE_GDM1_TCS_EN | FE_GDM1_UCS_EN),
++			FE_GDMA1_FWD_CFG);
++		fe_w32(fe_r32(FE_CDMA_CSG_CFG) | (FE_ICS_GEN_EN | FE_TCS_GEN_EN | FE_UCS_GEN_EN),
++			FE_CDMA_CSG_CFG);
++		fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
++	}
++
++	fe_w32(1, FE_FE_RST_GL);
++	fe_w32(0, FE_FE_RST_GL);
++
++	return 0;
++}
++
++static int fe_open(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	unsigned long flags;
++	u32 val;
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	napi_enable(&priv->rx_napi);
++	napi_enable(&priv->tx_napi);
++
++	val = FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN;
++	val |= priv->soc->pdma_glo_cfg;
++	fe_reg_w32(val, FE_REG_PDMA_GLO_CFG);
++
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++
++	if (priv->phy)
++		priv->phy->start(priv);
++
++	if (priv->soc->has_carrier && priv->soc->has_carrier(priv))
++		netif_carrier_on(dev);
++
++	netif_start_queue(dev);
++	fe_int_enable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
++
++	return 0;
++}
++
++static int fe_stop(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	unsigned long flags;
++
++	fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
++
++	netif_stop_queue(dev);
++
++	if (priv->phy)
++		priv->phy->stop(priv);
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	napi_disable(&priv->rx_napi);
++	napi_disable(&priv->tx_napi);
++
++	fe_reg_w32(fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
++		     ~(FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN),
++		     FE_REG_PDMA_GLO_CFG);
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++
++	return 0;
++}
++
++static int __init fe_init(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++	struct device_node *port;
++	int err;
++
++	BUG_ON(!priv->soc->reset_fe);
++	priv->soc->reset_fe();
++
++	if (priv->soc->switch_init)
++		priv->soc->switch_init(priv);
++
++	net_srandom(jiffies);
++	memcpy(dev->dev_addr, priv->soc->mac, ETH_ALEN);
++	of_get_mac_address_mtd(priv->device->of_node, dev->dev_addr);
++
++	err = fe_mdio_init(priv);
++	if (err)
++		return err;
++
++	if (priv->phy) {
++		err = priv->phy->connect(priv);
++		if (err)
++			goto err_mdio_cleanup;
++	}
++
++	if (priv->soc->port_init)
++		for_each_child_of_node(priv->device->of_node, port)
++			if (of_device_is_compatible(port, "ralink,eth-port"))
++				priv->soc->port_init(priv, port);
++
++	err = fe_hw_init(dev);
++	if (err)
++		goto err_phy_disconnect;
++
++	return 0;
++
++err_phy_disconnect:
++	if (priv->phy)
++		priv->phy->disconnect(priv);
++err_mdio_cleanup:
++	fe_mdio_cleanup(priv);
++
++	return err;
++}
++
++static void fe_uninit(struct net_device *dev)
++{
++	struct fe_priv *priv = netdev_priv(dev);
++
++	if (priv->phy)
++		priv->phy->disconnect(priv);
++	fe_mdio_cleanup(priv);
++
++	fe_reg_w32(0, FE_REG_FE_INT_ENABLE);
++	free_irq(dev->irq, dev);
++
++	fe_free_dma(priv);
++}
++
++static const struct net_device_ops fe_netdev_ops = {
++	.ndo_init		= fe_init,
++	.ndo_uninit		= fe_uninit,
++	.ndo_open		= fe_open,
++	.ndo_stop		= fe_stop,
++	.ndo_start_xmit		= fe_start_xmit,
++	.ndo_tx_timeout		= fe_tx_timeout,
++	.ndo_set_mac_address	= fe_set_mac_address,
++	.ndo_change_mtu		= eth_change_mtu,
++	.ndo_validate_addr	= eth_validate_addr,
++};
++
++static int fe_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	const struct of_device_id *match;
++	struct fe_soc_data *soc = NULL;
++	struct net_device *netdev;
++	struct fe_priv *priv;
++	struct clk *sysclk;
++	int err;
++
++	match = of_match_device(of_fe_match, &pdev->dev);
++	soc = (struct fe_soc_data *) match->data;
++	if (soc->reg_table)
++		fe_reg_table = soc->reg_table;
++
++	fe_base = devm_request_and_ioremap(&pdev->dev, res);
++	if (!fe_base)
++		return -ENOMEM;
++
++	netdev = alloc_etherdev(sizeof(struct fe_priv));
++	if (!netdev) {
++		dev_err(&pdev->dev, "alloc_etherdev failed\n");
++		return -ENOMEM;
++	}
++
++	strcpy(netdev->name, "eth%d");
++	netdev->netdev_ops = &fe_netdev_ops;
++	netdev->base_addr = (unsigned long) fe_base;
++	netdev->watchdog_timeo = TX_TIMEOUT;
++	netdev->features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
++	if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
++		netdev->features |= NETIF_F_HW_VLAN_TX;
++
++	netdev->irq = platform_get_irq(pdev, 0);
++	if (netdev->irq < 0) {
++		dev_err(&pdev->dev, "no IRQ resource found\n");
++		kfree(netdev);
++		return -ENXIO;
++	}
++
++	priv = netdev_priv(netdev);
++	memset(priv, 0, sizeof(struct fe_priv));
++	spin_lock_init(&priv->page_lock);
++
++	sysclk = devm_clk_get(&pdev->dev, NULL);
++	if (!IS_ERR(sysclk))
++		priv->sysclk = clk_get_rate(sysclk);
++
++	priv->netdev = netdev;
++	priv->device = &pdev->dev;
++	priv->soc = soc;
++
++	err = register_netdev(netdev);
++	if (err) {
++		dev_err(&pdev->dev, "error bringing up device\n");
++		kfree(netdev);
++		return err;
++	}
++
++	netif_napi_add(netdev, &priv->rx_napi, fe_poll_rx, 32);
++	netif_napi_add(netdev, &priv->tx_napi, fe_poll_tx, 8);
++
++        platform_set_drvdata(pdev, netdev);
++
++	netdev_info(netdev, "done loading\n");
++
++	return 0;
++}
++
++static int fe_remove(struct platform_device *pdev)
++{
++        struct net_device *dev = platform_get_drvdata(pdev);
++	struct fe_priv *priv = netdev_priv(dev);
++
++	netif_stop_queue(dev);
++	netif_napi_del(&priv->rx_napi);
++	netif_napi_del(&priv->tx_napi);
++
++	unregister_netdev(dev);
++	free_netdev(dev);
++
++	return 0;
++}
++
++static struct platform_driver fe_driver = {
++	.probe = fe_probe,
++	.remove = fe_remove,
++	.driver = {
++		.name = "ralink_soc_eth",
++		.owner = THIS_MODULE,
++		.of_match_table = of_fe_match,
++	},
++};
++
++static int __init init_rtfe(void)
++{
++	int ret;
++
++	ret = rtesw_init();
++	if (ret)
++		return ret;
++
++	ret = platform_driver_register(&fe_driver);
++	if (ret)
++		rtesw_exit();
++
++	return ret;
++}
++
++static void __exit exit_rtfe(void)
++{
++	platform_driver_unregister(&fe_driver);
++	rtesw_exit();
++}
++
++module_init(init_rtfe);
++module_exit(exit_rtfe);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
+diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.h b/drivers/net/ethernet/ralink/ralink_soc_eth.h
+new file mode 100644
+index 0000000..0c769ef
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.h
+@@ -0,0 +1,372 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   based on Ralink SDK3.3
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef FE_ETH_H
++#define FE_ETH_H
++
++#include <linux/mii.h>
++#include <linux/interrupt.h>
++#include <linux/netdevice.h>
++#include <linux/dma-mapping.h>
++#include <linux/phy.h>
++
++
++enum fe_reg {
++	FE_REG_PDMA_GLO_CFG = 0,
++	FE_REG_PDMA_RST_CFG,
++	FE_REG_DLY_INT_CFG,
++	FE_REG_TX_BASE_PTR0,
++	FE_REG_TX_MAX_CNT0,
++	FE_REG_TX_CTX_IDX0,
++	FE_REG_RX_BASE_PTR0,
++	FE_REG_RX_MAX_CNT0,
++	FE_REG_RX_CALC_IDX0,
++	FE_REG_FE_INT_ENABLE,
++	FE_REG_FE_INT_STATUS,
++	FE_REG_FE_DMA_VID_BASE,
++	FE_REG_COUNT
++};
++
++#define NUM_DMA_DESC		0x100
++
++#define FE_DELAY_EN_INT		0x80
++#define FE_DELAY_MAX_INT	0x04
++#define FE_DELAY_MAX_TOUT	0x04
++#define FE_DELAY_CHAN		(((FE_DELAY_EN_INT | FE_DELAY_MAX_INT) << 8) | FE_DELAY_MAX_TOUT)
++#define FE_DELAY_INIT		((FE_DELAY_CHAN << 16) | FE_DELAY_CHAN)
++#define FE_PSE_FQFC_CFG_INIT	0x80504000
++
++/* interrupt bits */
++#define FE_CNT_PPE_AF		BIT(31)
++#define FE_CNT_GDM_AF		BIT(29)
++#define FE_PSE_P2_FC		BIT(26)
++#define FE_PSE_BUF_DROP		BIT(24)
++#define FE_GDM_OTHER_DROP	BIT(23)
++#define FE_PSE_P1_FC		BIT(22)
++#define FE_PSE_P0_FC		BIT(21)
++#define FE_PSE_FQ_EMPTY		BIT(20)
++#define FE_GE1_STA_CHG		BIT(18)
++#define FE_TX_COHERENT		BIT(17)
++#define FE_RX_COHERENT		BIT(16)
++#define FE_TX_DONE_INT3		BIT(11)
++#define FE_TX_DONE_INT2		BIT(10)
++#define FE_TX_DONE_INT1		BIT(9)
++#define FE_TX_DONE_INT0		BIT(8)
++#define FE_RX_DONE_INT0		BIT(2)
++#define FE_TX_DLY_INT		BIT(1)
++#define FE_RX_DLY_INT		BIT(0)
++
++#define RT5350_RX_DLY_INT	BIT(30)
++#define RT5350_TX_DLY_INT	BIT(28)
++
++/* registers */
++#define FE_FE_OFFSET		0x0000
++#define FE_GDMA_OFFSET		0x0020
++#define FE_PSE_OFFSET		0x0040
++#define FE_GDMA2_OFFSET		0x0060
++#define FE_CDMA_OFFSET		0x0080
++#define FE_DMA_VID0		0x00a8
++#define FE_PDMA_OFFSET		0x0100
++#define FE_PPE_OFFSET		0x0200
++#define FE_CMTABLE_OFFSET	0x0400
++#define FE_POLICYTABLE_OFFSET	0x1000
++
++#define RT5350_PDMA_OFFSET	0x0800
++#define RT5350_SDM_OFFSET	0x0c00
++
++#define FE_MDIO_ACCESS		(FE_FE_OFFSET + 0x00)
++#define FE_MDIO_CFG		(FE_FE_OFFSET + 0x04)
++#define FE_FE_GLO_CFG		(FE_FE_OFFSET + 0x08)
++#define FE_FE_RST_GL		(FE_FE_OFFSET + 0x0C)
++#define FE_FE_INT_STATUS	(FE_FE_OFFSET + 0x10)
++#define FE_FE_INT_ENABLE	(FE_FE_OFFSET + 0x14)
++#define FE_MDIO_CFG2		(FE_FE_OFFSET + 0x18)
++#define FE_FOC_TS_T		(FE_FE_OFFSET + 0x1C)
++
++#define	FE_GDMA1_FWD_CFG	(FE_GDMA_OFFSET + 0x00)
++#define FE_GDMA1_SCH_CFG	(FE_GDMA_OFFSET + 0x04)
++#define FE_GDMA1_SHPR_CFG	(FE_GDMA_OFFSET + 0x08)
++#define FE_GDMA1_MAC_ADRL	(FE_GDMA_OFFSET + 0x0C)
++#define FE_GDMA1_MAC_ADRH	(FE_GDMA_OFFSET + 0x10)
++
++#define	FE_GDMA2_FWD_CFG	(FE_GDMA2_OFFSET + 0x00)
++#define FE_GDMA2_SCH_CFG	(FE_GDMA2_OFFSET + 0x04)
++#define FE_GDMA2_SHPR_CFG	(FE_GDMA2_OFFSET + 0x08)
++#define FE_GDMA2_MAC_ADRL	(FE_GDMA2_OFFSET + 0x0C)
++#define FE_GDMA2_MAC_ADRH	(FE_GDMA2_OFFSET + 0x10)
++
++#define FE_PSE_FQ_CFG		(FE_PSE_OFFSET + 0x00)
++#define FE_CDMA_FC_CFG		(FE_PSE_OFFSET + 0x04)
++#define FE_GDMA1_FC_CFG		(FE_PSE_OFFSET + 0x08)
++#define FE_GDMA2_FC_CFG		(FE_PSE_OFFSET + 0x0C)
++
++#define FE_CDMA_CSG_CFG		(FE_CDMA_OFFSET + 0x00)
++#define FE_CDMA_SCH_CFG		(FE_CDMA_OFFSET + 0x04)
++
++#define MT7620A_GDMA_OFFSET		0x0600
++#define	MT7620A_GDMA1_FWD_CFG		(MT7620A_GDMA_OFFSET + 0x00)
++#define MT7620A_FE_GDMA1_SCH_CFG	(MT7620A_GDMA_OFFSET + 0x04)
++#define MT7620A_FE_GDMA1_SHPR_CFG	(MT7620A_GDMA_OFFSET + 0x08)
++#define MT7620A_FE_GDMA1_MAC_ADRL	(MT7620A_GDMA_OFFSET + 0x0C)
++#define MT7620A_FE_GDMA1_MAC_ADRH	(MT7620A_GDMA_OFFSET + 0x10)
++
++#define RT5350_TX_BASE_PTR0	(RT5350_PDMA_OFFSET + 0x00)
++#define RT5350_TX_MAX_CNT0	(RT5350_PDMA_OFFSET + 0x04)
++#define RT5350_TX_CTX_IDX0	(RT5350_PDMA_OFFSET + 0x08)
++#define RT5350_TX_DTX_IDX0	(RT5350_PDMA_OFFSET + 0x0C)
++#define RT5350_TX_BASE_PTR1	(RT5350_PDMA_OFFSET + 0x10)
++#define RT5350_TX_MAX_CNT1	(RT5350_PDMA_OFFSET + 0x14)
++#define RT5350_TX_CTX_IDX1	(RT5350_PDMA_OFFSET + 0x18)
++#define RT5350_TX_DTX_IDX1	(RT5350_PDMA_OFFSET + 0x1C)
++#define RT5350_TX_BASE_PTR2	(RT5350_PDMA_OFFSET + 0x20)
++#define RT5350_TX_MAX_CNT2	(RT5350_PDMA_OFFSET + 0x24)
++#define RT5350_TX_CTX_IDX2	(RT5350_PDMA_OFFSET + 0x28)
++#define RT5350_TX_DTX_IDX2	(RT5350_PDMA_OFFSET + 0x2C)
++#define RT5350_TX_BASE_PTR3	(RT5350_PDMA_OFFSET + 0x30)
++#define RT5350_TX_MAX_CNT3	(RT5350_PDMA_OFFSET + 0x34)
++#define RT5350_TX_CTX_IDX3	(RT5350_PDMA_OFFSET + 0x38)
++#define RT5350_TX_DTX_IDX3	(RT5350_PDMA_OFFSET + 0x3C)
++#define RT5350_RX_BASE_PTR0	(RT5350_PDMA_OFFSET + 0x100)
++#define RT5350_RX_MAX_CNT0	(RT5350_PDMA_OFFSET + 0x104)
++#define RT5350_RX_CALC_IDX0	(RT5350_PDMA_OFFSET + 0x108)
++#define RT5350_RX_DRX_IDX0	(RT5350_PDMA_OFFSET + 0x10C)
++#define RT5350_RX_BASE_PTR1	(RT5350_PDMA_OFFSET + 0x110)
++#define RT5350_RX_MAX_CNT1	(RT5350_PDMA_OFFSET + 0x114)
++#define RT5350_RX_CALC_IDX1	(RT5350_PDMA_OFFSET + 0x118)
++#define RT5350_RX_DRX_IDX1	(RT5350_PDMA_OFFSET + 0x11C)
++#define RT5350_PDMA_GLO_CFG	(RT5350_PDMA_OFFSET + 0x204)
++#define RT5350_PDMA_RST_CFG	(RT5350_PDMA_OFFSET + 0x208)
++#define RT5350_DLY_INT_CFG	(RT5350_PDMA_OFFSET + 0x20c)
++#define RT5350_FE_INT_STATUS	(RT5350_PDMA_OFFSET + 0x220)
++#define RT5350_FE_INT_ENABLE	(RT5350_PDMA_OFFSET + 0x228)
++#define RT5350_PDMA_SCH_CFG	(RT5350_PDMA_OFFSET + 0x280)
++
++#define FE_PDMA_GLO_CFG		(FE_PDMA_OFFSET + 0x00)
++#define FE_PDMA_RST_CFG		(FE_PDMA_OFFSET + 0x04)
++#define FE_PDMA_SCH_CFG		(FE_PDMA_OFFSET + 0x08)
++#define FE_DLY_INT_CFG		(FE_PDMA_OFFSET + 0x0C)
++#define FE_TX_BASE_PTR0		(FE_PDMA_OFFSET + 0x10)
++#define FE_TX_MAX_CNT0		(FE_PDMA_OFFSET + 0x14)
++#define FE_TX_CTX_IDX0		(FE_PDMA_OFFSET + 0x18)
++#define FE_TX_DTX_IDX0		(FE_PDMA_OFFSET + 0x1C)
++#define FE_TX_BASE_PTR1		(FE_PDMA_OFFSET + 0x20)
++#define FE_TX_MAX_CNT1		(FE_PDMA_OFFSET + 0x24)
++#define FE_TX_CTX_IDX1		(FE_PDMA_OFFSET + 0x28)
++#define FE_TX_DTX_IDX1		(FE_PDMA_OFFSET + 0x2C)
++#define FE_RX_BASE_PTR0		(FE_PDMA_OFFSET + 0x30)
++#define FE_RX_MAX_CNT0		(FE_PDMA_OFFSET + 0x34)
++#define FE_RX_CALC_IDX0		(FE_PDMA_OFFSET + 0x38)
++#define FE_RX_DRX_IDX0		(FE_PDMA_OFFSET + 0x3C)
++#define FE_TX_BASE_PTR2		(FE_PDMA_OFFSET + 0x40)
++#define FE_TX_MAX_CNT2		(FE_PDMA_OFFSET + 0x44)
++#define FE_TX_CTX_IDX2		(FE_PDMA_OFFSET + 0x48)
++#define FE_TX_DTX_IDX2		(FE_PDMA_OFFSET + 0x4C)
++#define FE_TX_BASE_PTR3		(FE_PDMA_OFFSET + 0x50)
++#define FE_TX_MAX_CNT3		(FE_PDMA_OFFSET + 0x54)
++#define FE_TX_CTX_IDX3		(FE_PDMA_OFFSET + 0x58)
++#define FE_TX_DTX_IDX3		(FE_PDMA_OFFSET + 0x5C)
++#define FE_RX_BASE_PTR1		(FE_PDMA_OFFSET + 0x60)
++#define FE_RX_MAX_CNT1		(FE_PDMA_OFFSET + 0x64)
++#define FE_RX_CALC_IDX1		(FE_PDMA_OFFSET + 0x68)
++#define FE_RX_DRX_IDX1		(FE_PDMA_OFFSET + 0x6C)
++
++#define RT5350_SDM_CFG		(RT5350_SDM_OFFSET + 0x00)  //Switch DMA configuration
++#define RT5350_SDM_RRING	(RT5350_SDM_OFFSET + 0x04)  //Switch DMA Rx Ring
++#define RT5350_SDM_TRING	(RT5350_SDM_OFFSET + 0x08)  //Switch DMA Tx Ring
++#define RT5350_SDM_MAC_ADRL	(RT5350_SDM_OFFSET + 0x0C)  //Switch MAC address LSB
++#define RT5350_SDM_MAC_ADRH	(RT5350_SDM_OFFSET + 0x10)  //Switch MAC Address MSB
++#define RT5350_SDM_TPCNT	(RT5350_SDM_OFFSET + 0x100) //Switch DMA Tx packet count
++#define RT5350_SDM_TBCNT	(RT5350_SDM_OFFSET + 0x104) //Switch DMA Tx byte count
++#define RT5350_SDM_RPCNT	(RT5350_SDM_OFFSET + 0x108) //Switch DMA rx packet count
++#define RT5350_SDM_RBCNT	(RT5350_SDM_OFFSET + 0x10C) //Switch DMA rx byte count
++#define RT5350_SDM_CS_ERR	(RT5350_SDM_OFFSET + 0x110) //Switch DMA rx checksum error count
++
++#define RT5350_SDM_ICS_EN	BIT(16)
++#define RT5350_SDM_TCS_EN	BIT(17)
++#define RT5350_SDM_UCS_EN	BIT(18)
++
++
++/* MDIO_CFG register bits */
++#define FE_MDIO_CFG_AUTO_POLL_EN	BIT(29)
++#define FE_MDIO_CFG_GP1_BP_EN		BIT(16)
++#define FE_MDIO_CFG_GP1_FRC_EN		BIT(15)
++#define FE_MDIO_CFG_GP1_SPEED_10	(0 << 13)
++#define FE_MDIO_CFG_GP1_SPEED_100	(1 << 13)
++#define FE_MDIO_CFG_GP1_SPEED_1000	(2 << 13)
++#define FE_MDIO_CFG_GP1_DUPLEX		BIT(12)
++#define FE_MDIO_CFG_GP1_FC_TX		BIT(11)
++#define FE_MDIO_CFG_GP1_FC_RX		BIT(10)
++#define FE_MDIO_CFG_GP1_LNK_DWN		BIT(9)
++#define FE_MDIO_CFG_GP1_AN_FAIL		BIT(8)
++#define FE_MDIO_CFG_MDC_CLK_DIV_1	(0 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_2	(1 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_4	(2 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_8	(3 << 6)
++#define FE_MDIO_CFG_TURBO_MII_FREQ	BIT(5)
++#define FE_MDIO_CFG_TURBO_MII_MODE	BIT(4)
++#define FE_MDIO_CFG_RX_CLK_SKEW_0	(0 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_200	(1 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_400	(2 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_INV	(3 << 2)
++#define FE_MDIO_CFG_TX_CLK_SKEW_0	0
++#define FE_MDIO_CFG_TX_CLK_SKEW_200	1
++#define FE_MDIO_CFG_TX_CLK_SKEW_400	2
++#define FE_MDIO_CFG_TX_CLK_SKEW_INV	3
++
++/* uni-cast port */
++#define FE_GDM1_ICS_EN		BIT(22)
++#define FE_GDM1_TCS_EN		BIT(21)
++#define FE_GDM1_UCS_EN		BIT(20)
++#define FE_GDM1_JMB_EN		BIT(19)
++#define FE_GDM1_STRPCRC		BIT(16)
++#define FE_GDM1_UFRC_P_CPU	(0 << 12)
++#define FE_GDM1_UFRC_P_GDMA1	(1 << 12)
++#define FE_GDM1_UFRC_P_PPE	(6 << 12)
++
++/* checksums */
++#define FE_ICS_GEN_EN		BIT(2)
++#define FE_UCS_GEN_EN		BIT(1)
++#define FE_TCS_GEN_EN		BIT(0)
++
++/* dma ring */
++#define FE_PST_DRX_IDX0		BIT(16)
++#define FE_PST_DTX_IDX3		BIT(3)
++#define FE_PST_DTX_IDX2		BIT(2)
++#define FE_PST_DTX_IDX1		BIT(1)
++#define FE_PST_DTX_IDX0		BIT(0)
++
++#define FE_TX_WB_DDONE		BIT(6)
++#define FE_RX_DMA_BUSY		BIT(3)
++#define FE_TX_DMA_BUSY		BIT(1)
++#define FE_RX_DMA_EN		BIT(2)
++#define FE_TX_DMA_EN		BIT(0)
++
++#define FE_PDMA_SIZE_4DWORDS	(0 << 4)
++#define FE_PDMA_SIZE_8DWORDS	(1 << 4)
++#define FE_PDMA_SIZE_16DWORDS	(2 << 4)
++
++#define FE_US_CYC_CNT_MASK	0xff
++#define FE_US_CYC_CNT_SHIFT	0x8
++#define FE_US_CYC_CNT_DIVISOR	1000000
++
++#define RX_DMA_PLEN0(_x)	(((_x) >> 16) & 0x3fff)
++#define RX_DMA_LSO		BIT(30)
++#define RX_DMA_DONE		BIT(31)
++#define RX_DMA_L4VALID		BIT(30)
++
++struct fe_rx_dma {
++	unsigned int rxd1;
++	unsigned int rxd2;
++	unsigned int rxd3;
++	unsigned int rxd4;
++} __packed __aligned(4);
++
++#define TX_DMA_PLEN0_MASK	((0x3fff) << 16)
++#define TX_DMA_PLEN0(_x)	(((_x) & 0x3fff) << 16)
++#define TX_DMA_LSO		BIT(30)
++#define TX_DMA_DONE		BIT(31)
++#define TX_DMA_QN(_x)		((_x) << 16)
++#define TX_DMA_PN(_x)		((_x) << 24)
++#define TX_DMA_QN_MASK		TX_DMA_QN(0x7)
++#define TX_DMA_PN_MASK		TX_DMA_PN(0x7)
++#define TX_DMA_CHKSUM		(0x7 << 29)
++
++struct fe_tx_dma {
++	unsigned int txd1;
++	unsigned int txd2;
++	unsigned int txd3;
++	unsigned int txd4;
++} __packed __aligned(4);
++
++struct fe_priv;
++
++struct fe_phy {
++	struct phy_device	*phy[8];
++	struct device_node	*phy_node[8];
++	const __be32		*phy_fixed[8];
++	int			duplex[8];
++	int			speed[8];
++	spinlock_t		lock;
++
++	int (*connect)(struct fe_priv *priv);
++	void (*disconnect)(struct fe_priv *priv);
++	void (*start)(struct fe_priv *priv);
++	void (*stop)(struct fe_priv *priv);
++};
++
++struct fe_soc_data
++{
++	unsigned char mac[6];
++	const u32 *reg_table;
++
++	void (*reset_fe)(void);
++	void (*set_mac)(struct fe_priv *priv, unsigned char *mac);
++	void (*fwd_config)(struct fe_priv *priv);
++	void (*tx_dma)(struct fe_priv *priv, int idx, int len);
++	void (*rx_dma)(struct fe_priv *priv, int idx, int len);
++	int (*switch_init)(struct fe_priv *priv);
++	void (*port_init)(struct fe_priv *priv, struct device_node *port);
++	int (*has_carrier)(struct fe_priv *priv);
++	int (*mdio_init)(struct fe_priv *priv);
++	void (*mdio_cleanup)(struct fe_priv *priv);
++	int (*mdio_write)(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++	int (*mdio_read)(struct mii_bus *bus, int phy_addr, int phy_reg);
++	void (*mdio_adjust_link)(struct fe_priv *priv, int port);
++
++	void *swpriv;
++	u32 pdma_glo_cfg;
++	u32 rx_dly_int;
++	u32 tx_dly_int;
++	u32 checksum_bit;
++
++	int min_pkt_len;
++};
++
++struct fe_priv
++{
++	spinlock_t			page_lock;
++
++	struct fe_soc_data		*soc;
++	struct net_device		*netdev;
++	struct device			*device;
++	unsigned long			sysclk;
++
++	struct fe_rx_dma		*rx_dma;
++	struct sk_buff			*rx_skb[NUM_DMA_DESC];
++        struct napi_struct		rx_napi;
++	dma_addr_t			rx_phys;
++
++	struct fe_tx_dma		*tx_dma;
++	struct sk_buff			*tx_skb[NUM_DMA_DESC];
++        struct napi_struct		tx_napi;
++	dma_addr_t			tx_phys;
++	unsigned int			tx_free_idx;
++
++	struct fe_phy			*phy;
++	struct mii_bus			*mii_bus;
++	int				mii_irq[PHY_MAX_ADDR];
++
++	int				link[8];
++};
++
++extern const struct of_device_id of_fe_match[];
++
++void fe_w32(u32 val, unsigned reg);
++u32 fe_r32(unsigned reg);
++
++#endif /* FE_ETH_H */
+diff --git a/drivers/net/ethernet/ralink/soc_mt7620.c b/drivers/net/ethernet/ralink/soc_mt7620.c
+new file mode 100644
+index 0000000..55e303f
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_mt7620.c
+@@ -0,0 +1,111 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "gsw_mt7620a.h"
++
++#define MT7620A_CDMA_CSG_CFG	0x400
++#define MT7620_DMA_VID		(MT7620A_CDMA_CSG_CFG | 0x30)
++#define MT7620A_DMA_2B_OFFSET	BIT(31)
++#define MT7620A_RESET_FE	BIT(21)
++#define MT7620A_RESET_ESW	BIT(23)
++#define MT7620_L4_VALID		BIT(23)
++
++#define SYSC_REG_RESET_CTRL     0x34
++#define MAX_RX_LENGTH           1536
++
++#define CDMA_ICS_EN		BIT(2)
++#define CDMA_UCS_EN		BIT(1)
++#define CDMA_TCS_EN		BIT(0)
++
++#define GDMA_ICS_EN		BIT(22)
++#define GDMA_TCS_EN		BIT(21)
++#define GDMA_UCS_EN		BIT(20)
++
++static const u32 rt5350_reg_table[FE_REG_COUNT] = {
++	[FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
++	[FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
++	[FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
++	[FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
++	[FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
++	[FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
++	[FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
++	[FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
++	[FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
++	[FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
++	[FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
++	[FE_REG_FE_DMA_VID_BASE] = MT7620_DMA_VID,
++};
++
++static void mt7620_fe_reset(void)
++{
++	rt_sysc_w32(MT7620A_RESET_FE | MT7620A_RESET_ESW, SYSC_REG_RESET_CTRL);
++	rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
++}
++
++static void mt7620_fwd_config(struct fe_priv *priv)
++{
++	fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~7, MT7620A_GDMA1_FWD_CFG);
++	fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN | GDMA_TCS_EN | GDMA_UCS_EN), MT7620A_GDMA1_FWD_CFG);
++	fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) | (CDMA_ICS_EN | CDMA_UCS_EN | CDMA_TCS_EN), MT7620A_CDMA_CSG_CFG);
++}
++
++static void mt7620_tx_dma(struct fe_priv *priv, int idx, int len)
++{
++	if (len)
++		priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(len);
++	else
++		priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_DONE;
++}
++
++static void mt7620_rx_dma(struct fe_priv *priv, int idx, int len)
++{
++	priv->rx_dma[idx].rxd2 = RX_DMA_PLEN0(len);
++}
++
++static struct fe_soc_data mt7620_data = {
++	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++	.reset_fe = mt7620_fe_reset,
++	.set_mac = mt7620_set_mac,
++	.fwd_config = mt7620_fwd_config,
++	.tx_dma = mt7620_tx_dma,
++	.rx_dma = mt7620_rx_dma,
++	.switch_init = mt7620_gsw_probe,
++	.port_init = mt7620_port_init,
++	.min_pkt_len = 0,
++	.reg_table = rt5350_reg_table,
++	.pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS | MT7620A_DMA_2B_OFFSET,
++	.rx_dly_int = RT5350_RX_DLY_INT,
++	.tx_dly_int = RT5350_TX_DLY_INT,
++	.checksum_bit = MT7620_L4_VALID,
++	.has_carrier = mt7620a_has_carrier,
++	.mdio_read = mt7620_mdio_read,
++	.mdio_write = mt7620_mdio_write,
++	.mdio_adjust_link = mt7620_mdio_link_adjust,
++};
++
++const struct of_device_id of_fe_match[] = {
++	{ .compatible = "ralink,mt7620a-eth", .data = &mt7620_data },
++	{},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+diff --git a/drivers/net/ethernet/ralink/soc_rt2880.c b/drivers/net/ethernet/ralink/soc_rt2880.c
+new file mode 100644
+index 0000000..fdbd118
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt2880.c
+@@ -0,0 +1,51 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio_rt2880.h"
++
++#define SYSC_REG_RESET_CTRL		0x034
++#define RT2880_RESET_FE			BIT(18)
++
++void rt2880_fe_reset(void)
++{
++	rt_sysc_w32(RT2880_RESET_FE, SYSC_REG_RESET_CTRL);
++}
++
++struct fe_soc_data rt2880_data = {
++	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++	.reset_fe = rt2880_fe_reset,
++	.min_pkt_len = 64,
++        .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++	.checksum_bit = RX_DMA_L4VALID,
++	.rx_dly_int = FE_RX_DLY_INT,
++	.tx_dly_int = FE_TX_DLY_INT,
++	.mdio_read = rt2880_mdio_read,
++	.mdio_write = rt2880_mdio_write,
++	.mdio_link_adjust = rt2880_mdio_link_adjust,
++};
++
++const struct of_device_id of_fe_match[] = {
++	{ .compatible = "ralink,rt2880-eth", .data = &rt2880_data },
++	{},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+diff --git a/drivers/net/ethernet/ralink/soc_rt305x.c b/drivers/net/ethernet/ralink/soc_rt305x.c
+new file mode 100644
+index 0000000..c43d3f9
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt305x.c
+@@ -0,0 +1,102 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++
++#define RT305X_RESET_FE         BIT(21)
++#define RT305X_RESET_ESW        BIT(23)
++#define SYSC_REG_RESET_CTRL     0x034
++
++static const u32 rt5350_reg_table[FE_REG_COUNT] = {
++	[FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
++	[FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
++	[FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
++	[FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
++	[FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
++	[FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
++	[FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
++	[FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
++	[FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
++	[FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
++	[FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
++	[FE_REG_FE_DMA_VID_BASE] = 0,
++};
++
++static void rt305x_fe_reset(void)
++{
++	rt_sysc_w32(RT305X_RESET_FE, SYSC_REG_RESET_CTRL);
++	rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
++}
++
++static void rt5350_set_mac(struct fe_priv *priv, unsigned char *mac)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&priv->page_lock, flags);
++	fe_w32((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH);
++	fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++		RT5350_SDM_MAC_ADRL);
++	spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static void rt5350_fwd_config(struct fe_priv *priv)
++{
++	fe_w32(fe_r32(RT5350_SDM_CFG) & ~0xffff, RT5350_SDM_CFG);
++	fe_w32(fe_r32(RT5350_SDM_CFG) | RT5350_SDM_ICS_EN | RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN,
++		RT5350_SDM_CFG);
++}
++
++static void rt5350_fe_reset(void)
++{
++	rt_sysc_w32(RT305X_RESET_FE | RT305X_RESET_ESW, SYSC_REG_RESET_CTRL);
++	rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
++}
++
++static struct fe_soc_data rt3050_data = {
++	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++	.reset_fe = rt305x_fe_reset,
++	.min_pkt_len = 64,
++        .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++	.checksum_bit = RX_DMA_L4VALID,
++	.rx_dly_int = FE_RX_DLY_INT,
++	.tx_dly_int = FE_TX_DLY_INT,
++};
++
++static struct fe_soc_data rt5350_data = {
++	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++	.reg_table = rt5350_reg_table,
++	.reset_fe = rt5350_fe_reset,
++	.set_mac = rt5350_set_mac,
++	.fwd_config = rt5350_fwd_config,
++	.min_pkt_len = 64,
++        .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++	.checksum_bit = RX_DMA_L4VALID,
++	.rx_dly_int = RT5350_RX_DLY_INT,
++	.tx_dly_int = RT5350_TX_DLY_INT,
++};
++
++const struct of_device_id of_fe_match[] = {
++	{ .compatible = "ralink,rt3050-eth", .data = &rt3050_data },
++	{ .compatible = "ralink,rt5350-eth", .data = &rt5350_data },
++	{},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+diff --git a/drivers/net/ethernet/ralink/soc_rt3883.c b/drivers/net/ethernet/ralink/soc_rt3883.c
+new file mode 100644
+index 0000000..3886be1
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt3883.c
+@@ -0,0 +1,59 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; version 2 of the License
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio_rt2880.h"
++
++#define RT3883_SYSC_REG_RSTCTRL		0x34
++#define RT3883_RSTCTRL_FE		BIT(21)
++
++static void rt3883_fe_reset(void)
++{
++	u32 t;
++
++	t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
++	t |= RT3883_RSTCTRL_FE;
++	rt_sysc_w32(t , RT3883_SYSC_REG_RSTCTRL);
++
++	t &= ~RT3883_RSTCTRL_FE;
++	rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
++}
++
++static struct fe_soc_data rt3883_data = {
++	.mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++	.reset_fe = rt3883_fe_reset,
++	.min_pkt_len = 64,
++        .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++	.rx_dly_int = FE_RX_DLY_INT,
++	.tx_dly_int = FE_TX_DLY_INT,
++	.checksum_bit = RX_DMA_L4VALID,
++	.mdio_read = rt2880_mdio_read,
++	.mdio_write = rt2880_mdio_write,
++	.mdio_link_adjust = rt2880_mdio_link_adjust,
++};
++
++const struct of_device_id of_fe_match[] = {
++	{ .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
++	{},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
++
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0160-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-3.9/0160-USB-phy-add-ralink-SoC-driver.patch
new file mode 100644
index 0000000000..095f911809
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0160-USB-phy-add-ralink-SoC-driver.patch
@@ -0,0 +1,238 @@
+From efe391a3614b98a0f84fd49e63b4009185ff9a1a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 2 May 2013 23:29:08 +0200
+Subject: [PATCH 160/164] USB: phy: add ralink SoC driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/phy/Kconfig      |    8 ++
+ drivers/usb/phy/Makefile     |    1 +
+ drivers/usb/phy/ralink-phy.c |  191 ++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 200 insertions(+)
+ create mode 100644 drivers/usb/phy/ralink-phy.c
+
+diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
+index 9054938..b197c70 100644
+--- a/drivers/usb/phy/Kconfig
++++ b/drivers/usb/phy/Kconfig
+@@ -74,3 +74,11 @@ config SAMSUNG_USBPHY
+ 	help
+ 	  Enable this to support Samsung USB phy controller for samsung
+ 	  SoCs.
++
++config RALINK_USBPHY
++	bool "Ralink USB PHY controller Driver"
++	depends on MIPS && RALINK
++	select USB_OTG_UTILS
++	help
++	  Enable this to support ralink USB phy controller for ralink
++	  SoCs.
+diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
+index b13faa1..2df30f1 100644
+--- a/drivers/usb/phy/Makefile
++++ b/drivers/usb/phy/Makefile
+@@ -12,3 +12,4 @@ obj-$(CONFIG_MV_U3D_PHY)		+= mv_u3d_phy.o
+ obj-$(CONFIG_USB_EHCI_TEGRA)	+= tegra_usb_phy.o
+ obj-$(CONFIG_USB_RCAR_PHY)		+= rcar-phy.o
+ obj-$(CONFIG_SAMSUNG_USBPHY)		+= samsung-usbphy.o
++obj-$(CONFIG_RALINK_USBPHY)		+= ralink-phy.o
+diff --git a/drivers/usb/phy/ralink-phy.c b/drivers/usb/phy/ralink-phy.c
+new file mode 100644
+index 0000000..3fbabea
+--- /dev/null
++++ b/drivers/usb/phy/ralink-phy.c
+@@ -0,0 +1,191 @@
++/*
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ * based on: Renesas R-Car USB phy driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/usb/otg.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RT_SYSC_REG_SYSCFG1		0x014
++#define RT_SYSC_REG_CLKCFG1		0x030
++#define RT_SYSC_REG_USB_PHY_CFG	0x05c
++
++#define RT_RSTCTRL_UDEV		BIT(25)
++#define RT_RSTCTRL_UHST		BIT(22)
++#define RT_SYSCFG1_USB0_HOST_MODE	BIT(10)
++
++#define MT7620_CLKCFG1_UPHY0_CLK_EN	BIT(25)
++#define RT_CLKCFG1_UPHY1_CLK_EN	BIT(20)
++#define RT_CLKCFG1_UPHY0_CLK_EN	BIT(18)
++
++#define USB_PHY_UTMI_8B60M		BIT(1)
++#define UDEV_WAKEUP			BIT(0)
++
++static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
++static struct reset_control *rstdev;
++static struct reset_control *rsthost;
++static u32 phy_clk;
++
++static void usb_phy_enable(int state)
++{
++	if (state)
++		rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
++	else
++		rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
++	mdelay(100);
++}
++
++static int usb_power_on(struct usb_phy *phy)
++{
++	if (atomic_inc_return(&usb_pwr_ref) == 1) {
++		u32 t;
++
++		usb_phy_enable(1);
++
++		reset_control_assert(rstdev);
++		reset_control_assert(rsthost);
++
++		if (OTG_STATE_B_HOST) {
++			rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
++			reset_control_deassert(rsthost);
++		} else {
++			rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
++			reset_control_deassert(rstdev);
++		}
++		mdelay(100);
++
++		t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
++		dev_info(phy->dev, "remote usb device wakeup %s\n",
++				(t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
++		if (t & USB_PHY_UTMI_8B60M)
++			dev_info(phy->dev, "UTMI 8bit 60MHz\n");
++		else
++			dev_info(phy->dev, "UTMI 16bit 30MHz\n");
++	}
++
++	return 0;
++}
++
++static void usb_power_off(struct usb_phy *phy)
++{
++	if (atomic_dec_return(&usb_pwr_ref) == 0) {
++		usb_phy_enable(0);
++		reset_control_assert(rstdev);
++		reset_control_assert(rsthost);
++	}
++}
++
++static int usb_set_host(struct usb_otg *otg, struct usb_bus *host)
++{
++	otg->gadget = NULL;
++	otg->host = host;
++
++	return 0;
++}
++
++static int usb_set_peripheral(struct usb_otg *otg,
++		struct usb_gadget *gadget)
++{
++	otg->host = NULL;
++	otg->gadget = gadget;
++
++	return 0;
++}
++
++static const struct of_device_id ralink_usbphy_dt_match[] = {
++	{ .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
++	{ .compatible = "ralink,mt7620a-usbphy", .data = (void *) MT7620_CLKCFG1_UPHY0_CLK_EN },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match);
++
++static int usb_phy_probe(struct platform_device *pdev)
++{
++	const struct of_device_id *match;
++	struct device *dev = &pdev->dev;
++	struct usb_otg *otg;
++	struct usb_phy *phy;
++	int ret;
++
++	match = of_match_device(ralink_usbphy_dt_match, &pdev->dev);
++	phy_clk = (int) match->data;
++
++	rsthost = devm_reset_control_get(&pdev->dev, "host");
++	if (IS_ERR(rsthost))
++		return PTR_ERR(rsthost);
++
++	rstdev = devm_reset_control_get(&pdev->dev, "device");
++	if (IS_ERR(rstdev))
++		return PTR_ERR(rstdev);
++
++	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
++	if (!phy) {
++		dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n");
++		return -ENOMEM;
++	}
++
++	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
++	if (!otg) {
++		dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
++		return -ENOMEM;
++	}
++
++	phy->dev = dev;
++	phy->label = dev_name(dev);
++	phy->init = usb_power_on;
++	phy->shutdown = usb_power_off;
++	otg->set_host = usb_set_host;
++	otg->set_peripheral = usb_set_peripheral;
++	otg->phy = phy;
++	phy->otg = otg;
++	ret = usb_add_phy(phy, USB_PHY_TYPE_USB2);
++
++	if (ret < 0) {
++		dev_err(dev, "usb phy addition error\n");
++		return ret;
++	}
++
++	platform_set_drvdata(pdev, phy);
++
++	dev_info(&pdev->dev, "loaded\n");
++
++	return ret;
++}
++
++static int usb_phy_remove(struct platform_device *pdev)
++{
++	struct usb_phy *phy = platform_get_drvdata(pdev);
++
++	usb_remove_phy(phy);
++
++	return 0;
++}
++
++static struct platform_driver usb_phy_driver = {
++	.driver		= {
++		.owner	= THIS_MODULE,
++		.name	= "rt3xxx-usbphy",
++		.of_match_table = of_match_ptr(ralink_usbphy_dt_match),
++	},
++	.probe		= usb_phy_probe,
++	.remove		= usb_phy_remove,
++};
++
++module_platform_driver(usb_phy_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("Ralink USB phy");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0161-USB-add-OHCI-EHCI-OF-binding.patch b/target/linux/ramips/patches-3.9/0161-USB-add-OHCI-EHCI-OF-binding.patch
new file mode 100644
index 0000000000..abb1171391
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0161-USB-add-OHCI-EHCI-OF-binding.patch
@@ -0,0 +1,245 @@
+From 9a15efea2e55327cf7c813da64589509f9c40786 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 16 May 2013 23:11:45 +0200
+Subject: [PATCH 161/164] USB: add OHCI/EHCI OF binding
+
+based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig         |    2 ++
+ drivers/usb/Makefile             |    3 ++-
+ drivers/usb/host/ehci-platform.c |   44 ++++++++++++++++++++++++++++++++------
+ drivers/usb/host/ohci-platform.c |   37 +++++++++++++++++++++++++++-----
+ 4 files changed, 74 insertions(+), 12 deletions(-)
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index c8d5b6c..7cd1188 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -27,6 +27,8 @@ choice
+ 		bool "MT7620"
+ 		select CLKEVT_RT3352
+ 		select HW_HAS_PCI
++		select USB_ARCH_HAS_OHCI
++		select USB_ARCH_HAS_EHCI
+ 
+ endchoice
+ 
+diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
+index 8f5ebce..b766256 100644
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -12,6 +12,8 @@ obj-$(CONFIG_USB_DWC3)		+= dwc3/
+ 
+ obj-$(CONFIG_USB_MON)		+= mon/
+ 
++obj-$(CONFIG_USB_OTG_UTILS)	+= phy/
++
+ obj-$(CONFIG_PCI)		+= host/
+ obj-$(CONFIG_USB_EHCI_HCD)	+= host/
+ obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
+@@ -46,7 +48,6 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
+ obj-$(CONFIG_USB_SERIAL)	+= serial/
+ 
+ obj-$(CONFIG_USB)		+= misc/
+-obj-$(CONFIG_USB_OTG_UTILS)	+= phy/
+ obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
+ 
+ obj-$(CONFIG_USB_ATM)		+= atm/
+diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
+index ca75063..ae32410 100644
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -18,14 +18,18 @@
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
++#include <linux/dma-mapping.h>
+ #include <linux/err.h>
+ #include <linux/kernel.h>
+ #include <linux/hrtimer.h>
+ #include <linux/io.h>
+ #include <linux/module.h>
++#include <linux/of.h>
+ #include <linux/platform_device.h>
+ #include <linux/usb.h>
+ #include <linux/usb/hcd.h>
++#include <linux/usb/otg.h>
++#include <linux/usb/phy.h>
+ #include <linux/usb/ehci_pdriver.h>
+ 
+ #include "ehci.h"
+@@ -62,22 +66,32 @@ static const struct ehci_driver_overrides platform_overrides __initdata = {
+ 	.reset =	ehci_platform_reset,
+ };
+ 
++static struct usb_ehci_pdata ehci_platform_defaults;
++
+ static int ehci_platform_probe(struct platform_device *dev)
+ {
+ 	struct usb_hcd *hcd;
+ 	struct resource *res_mem;
+-	struct usb_ehci_pdata *pdata = dev->dev.platform_data;
++	struct usb_ehci_pdata *pdata;
+ 	int irq;
+ 	int err = -ENOMEM;
+ 
+-	if (!pdata) {
+-		WARN_ON(1);
+-		return -ENODEV;
+-	}
+-
+ 	if (usb_disabled())
+ 		return -ENODEV;
+ 
++	/*
++	 * use reasonable defaults so platforms don't have to provide these.
++	 * with DT probing on ARM, none of these are set.
++	 */
++	if (!dev->dev.platform_data)
++		dev->dev.platform_data = &ehci_platform_defaults;
++	if (!dev->dev.dma_mask)
++		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
++	if (!dev->dev.coherent_dma_mask)
++		dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
++
++	pdata = dev->dev.platform_data;
++
+ 	irq = platform_get_irq(dev, 0);
+ 	if (irq < 0) {
+ 		dev_err(&dev->dev, "no irq provided");
+@@ -105,6 +119,15 @@ static int ehci_platform_probe(struct platform_device *dev)
+ 	hcd->rsrc_start = res_mem->start;
+ 	hcd->rsrc_len = resource_size(res_mem);
+ 
++#ifdef CONFIG_USB_OTG_UTILS
++	hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
++	if (!IS_ERR_OR_NULL(hcd->phy)) {
++		otg_set_host(hcd->phy->otg,
++				&hcd->self);
++		usb_phy_init(hcd->phy);
++	}
++#endif
++
+ 	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+ 	if (IS_ERR(hcd->regs)) {
+ 		err = PTR_ERR(hcd->regs);
+@@ -139,6 +162,9 @@ static int ehci_platform_remove(struct platform_device *dev)
+ 	if (pdata->power_off)
+ 		pdata->power_off(dev);
+ 
++	if (pdata == &ehci_platform_defaults)
++		dev->dev.platform_data = NULL;
++
+ 	return 0;
+ }
+ 
+@@ -183,6 +209,11 @@ static int ehci_platform_resume(struct device *dev)
+ #define ehci_platform_resume	NULL
+ #endif /* CONFIG_PM */
+ 
++static const struct of_device_id ralink_ehci_ids[] = {
++	{ .compatible = "ralink,rt3xxx-ehci", },
++	{}
++};
++
+ static const struct platform_device_id ehci_platform_table[] = {
+ 	{ "ehci-platform", 0 },
+ 	{ }
+@@ -203,6 +234,7 @@ static struct platform_driver ehci_platform_driver = {
+ 		.owner	= THIS_MODULE,
+ 		.name	= "ehci-platform",
+ 		.pm	= &ehci_platform_pm_ops,
++		.of_match_table = of_match_ptr(ralink_ehci_ids),
+ 	}
+ };
+ 
+diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
+index c3e7287..dd9bac6 100644
+--- a/drivers/usb/host/ohci-platform.c
++++ b/drivers/usb/host/ohci-platform.c
+@@ -16,6 +16,10 @@
+ #include <linux/err.h>
+ #include <linux/platform_device.h>
+ #include <linux/usb/ohci_pdriver.h>
++#include <linux/dma-mapping.h>
++#include <linux/of.h>
++
++static struct usb_ohci_pdata ohci_platform_defaults;
+ 
+ static int ohci_platform_reset(struct usb_hcd *hcd)
+ {
+@@ -88,14 +92,22 @@ static int ohci_platform_probe(struct platform_device *dev)
+ {
+ 	struct usb_hcd *hcd;
+ 	struct resource *res_mem;
+-	struct usb_ohci_pdata *pdata = dev->dev.platform_data;
++	struct usb_ohci_pdata *pdata;
+ 	int irq;
+ 	int err = -ENOMEM;
+ 
+-	if (!pdata) {
+-		WARN_ON(1);
+-		return -ENODEV;
+-	}
++	/*
++	 * use reasonable defaults so platforms don't have to provide these.
++	 * with DT probing on ARM, none of these are set.
++	 */
++	if (!dev->dev.platform_data)
++		dev->dev.platform_data = &ohci_platform_defaults;
++	if (!dev->dev.dma_mask)
++		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
++	if (!dev->dev.coherent_dma_mask)
++		dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
++
++	pdata = dev->dev.platform_data;
+ 
+ 	if (usb_disabled())
+ 		return -ENODEV;
+@@ -128,6 +140,12 @@ static int ohci_platform_probe(struct platform_device *dev)
+ 	hcd->rsrc_start = res_mem->start;
+ 	hcd->rsrc_len = resource_size(res_mem);
+ 
++#ifdef CONFIG_USB_OTG_UTILS
++	hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
++	if (!IS_ERR_OR_NULL(hcd->phy))
++		usb_phy_init(hcd->phy);
++#endif
++
+ 	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+ 	if (IS_ERR(hcd->regs)) {
+ 		err = PTR_ERR(hcd->regs);
+@@ -162,6 +180,9 @@ static int ohci_platform_remove(struct platform_device *dev)
+ 	if (pdata->power_off)
+ 		pdata->power_off(dev);
+ 
++	if (pdata == &ohci_platform_defaults)
++		dev->dev.platform_data = NULL;
++
+ 	return 0;
+ }
+ 
+@@ -201,6 +222,11 @@ static int ohci_platform_resume(struct device *dev)
+ #define ohci_platform_resume	NULL
+ #endif /* CONFIG_PM */
+ 
++static const struct of_device_id ralink_ohci_ids[] = {
++	{ .compatible = "ralink,rt3xxx-ohci", },
++	{}
++};
++
+ static const struct platform_device_id ohci_platform_table[] = {
+ 	{ "ohci-platform", 0 },
+ 	{ }
+@@ -221,5 +247,6 @@ static struct platform_driver ohci_platform_driver = {
+ 		.owner	= THIS_MODULE,
+ 		.name	= "ohci-platform",
+ 		.pm	= &ohci_platform_pm_ops,
++		.of_match_table = of_match_ptr(ralink_ohci_ids),
+ 	}
+ };
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0162-USB-MIPS-ralink-add-rt5350-mt7620-UDC.patch b/target/linux/ramips/patches-3.9/0162-USB-MIPS-ralink-add-rt5350-mt7620-UDC.patch
new file mode 100644
index 0000000000..d1110a54cd
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0162-USB-MIPS-ralink-add-rt5350-mt7620-UDC.patch
@@ -0,0 +1,3025 @@
+From 0e3b1bffd1974e6852912865a7cea481617b1c39 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 30 May 2013 16:06:35 +0200
+Subject: [PATCH 162/164] USB: MIPS: ralink: add rt5350/mt7620 UDC
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/gadget/Kconfig       |    8 +
+ drivers/usb/gadget/Makefile      |    1 +
+ drivers/usb/gadget/rt_udc.h      |  417 +++++++
+ drivers/usb/gadget/rt_udc_pdma.c | 2547 ++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 2973 insertions(+)
+ create mode 100644 drivers/usb/gadget/rt_udc.h
+ create mode 100644 drivers/usb/gadget/rt_udc_pdma.c
+
+diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
+index c7525b1..6f0e293 100644
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -336,6 +336,14 @@ config USB_MV_U3D
+ 	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
+ 	  controller, which support super speed USB peripheral.
+ 
++config USB_RT_UDC
++	boolean "Ralink USB Device Port"
++	depends on SOC_MT7620
++	help
++	  Say "y" to link the driver statically, or "m" to build a
++	  dynamically linked module called "rt_udc" and force all
++	  gadget drivers to also be dynamically linked.
++
+ #
+ # Controllers available in both integrated and discrete versions
+ #
+diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
+index 82fb225..f78a3b2 100644
+--- a/drivers/usb/gadget/Makefile
++++ b/drivers/usb/gadget/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_USB_MV_UDC)	+= mv_udc.o
+ mv_udc-y			:= mv_udc_core.o
+ obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
+ obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
++obj-$(CONFIG_USB_RT_UDC)	+= rt_udc_pdma.o
+ 
+ # USB Functions
+ obj-$(CONFIG_USB_F_ACM)		+= f_acm.o
+diff --git a/drivers/usb/gadget/rt_udc.h b/drivers/usb/gadget/rt_udc.h
+new file mode 100644
+index 0000000..088e0d9
+--- /dev/null
++++ b/drivers/usb/gadget/rt_udc.h
+@@ -0,0 +1,417 @@
++/*
++ *	Copyright (C) 2009 Y.Y. Huang, Ralink Tech.(yy_huang@ralinktech.com)
++ *
++ *	This udc driver is now under testing and code is based on pxa2xx_udc.h
++ *	Please use it with your own risk!
++ *
++ *	This program is free software; you can redistribute it and/or modify
++ *	it under the terms of the GNU General Public License as published by
++ *	the Free Software Foundation; either version 2 of the License, or
++ *	(at your option) any later version.
++ *
++ *	This program is distributed in the hope that it will be useful,
++ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *	GNU General Public License for more details.
++ */
++
++#ifndef __LINUX_USB_GADGET_RT_UDC_H
++#define __LINUX_USB_GADGET_RT_UDC_H
++
++#define CONFIG_RALINK_MT7620
++
++#include <linux/types.h>
++
++//#include "../host/ralink_usb.h" 	/* for port sharing setting and power saving purpose */
++
++#if defined (CONFIG_RALINK_RT3883) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_MT7620)
++#define IN_EP_NUM		2
++#define OUT_EP_NUM		2
++#elif defined (CONFIG_RALINK_RT5350)
++#define IN_EP_NUM		1
++#define OUT_EP_NUM		1
++#else
++#error "Please define a platform."
++#endif
++
++/* Helper macros */
++#define EP_IDX(ep)		((ep->bEndpointAddress & ~USB_DIR_IN)+(EP_DIR(ep)? 0:IN_EP_NUM)) /* IN:1, OUT:0 */
++#define EP_NO(ep)		((ep->bEndpointAddress & ~USB_DIR_IN)) 							/* IN:1, OUT:0 */
++#define EP_DIR(ep)		((ep->bEndpointAddress) & USB_DIR_IN ? 1 : 0)
++#define EP_IN			1
++#define EP_OUT			0
++#define RT_USB_NB_EP	(IN_EP_NUM + OUT_EP_NUM + 1)
++
++/* Driver structures */
++struct rt_request {
++	struct usb_request			req;
++	struct list_head			queue;
++	unsigned int				in_use;
++	struct rt_ep_struct			*rt_ep;			// test for rx tasklet
++	int					zlp_dma_done;		// used for DMA ZLP packet.
++	int					txd_count;
++};
++
++enum ep0_state {
++	EP0_IDLE,
++	EP0_IN_DATA_PHASE,
++	EP0_OUT_DATA_PHASE,
++	EP0_NO_DATA_PHASE,
++	EP0_STALL,
++};
++
++struct rt_ep_struct {
++	struct usb_ep				ep;
++	struct rt_udc_struct		*rt_usb;
++	struct list_head			queue;
++	unsigned char				stopped;
++	unsigned char				bEndpointAddress;
++	unsigned char				bmAttributes;
++
++	unsigned char				pending;
++	unsigned int				rx_done_count;	/* used by OUT EP only */
++	unsigned int				tx_done_count;	/* used by OUT EP only */
++};
++
++struct rt_udc_struct {
++	struct usb_gadget			gadget;
++	struct usb_gadget_driver	*driver;
++	struct device				*dev;
++	struct rt_ep_struct			rt_ep[RT_USB_NB_EP];
++	/* struct clk				*clk; */
++	struct timer_list			timer;
++	enum ep0_state				ep0state;
++	struct resource				*res;
++	void __iomem				*base;
++	unsigned char				set_config;
++	int					cfg,
++						intf,
++						alt,
++						interrupt;
++};
++
++#define USB_BASE		(0xB0120000)
++
++#define OUT0BC			(0x000)
++#define IN0BC			(0x001)
++#define EP0CS			(0x002)
++
++#define OUT1CON			(0x00A)
++#define IN1CON			(0x00E)
++#define OUT2CON			(0x012)
++#define IN2CON			(0x016)
++#define OUT3CON			(0x01A)
++#define IN3CON			(0x01E)
++#define OUT4CON			(0x022)
++#define IN4CON			(0x026)
++
++
++#define EP0INDAT		(0x100)
++#define EP0OUTDAT		(0x140)
++#define SETUPDATA		(0x180)
++
++#define IN07IRQ			(0x188)
++#define IN815IRQ		(0x189)
++#define OUT07IRQ		(0x18A)
++#define OUT815IRQ		(0x18B)
++#define USBIRQ			(0x18C)
++#define OUT07PNGIRQ		(0x18E)
++#define OUT815PNGIRQ	(0x18F)
++
++#define IN07IEN			(0x194)
++#define OUT07IEN		(0x196)
++#define USBIEN			(0x198)
++
++#define OUT07PNGIEN		(0x19A)
++#define OUT815PNGIEN	(0x19B)
++
++#define ENDPRST			(0x1A2)
++#define ENDPRST_IO		(0x1 << 4)
++#define ENDPRST_TOGRST	(0x1 << 5)
++#define ENDPRST_FIFORST	(0x1 << 6)
++
++#define FIFOCTRL		(0x1A8)
++
++#define EP_CS_EP0_STALL		(0x1 << 0)
++#define EP_CS_EP0_HSNAK		(0x1 << 1)
++#define EP_CS_EP0_INBSY		(0x1 << 2)
++#define EP_CS_EP0_OUTBSY	(0x1 << 3)
++#define EP_CS_AUTO		(0x1 << 4)
++#define EP_CS_NPAK1		(0x1 << 3)
++#define EP_CS_NPAK0		(0x1 << 2)
++#define EP_CS_BSY		(0x1 << 1)
++#define EP_CS_ERR		(0x1 << 0)
++
++#define EP0_OUT_BSY		(0x1 << 3)
++#define EP0_IN_BSY		(0x1 << 2)
++
++#define USB_INTR_HSPEED				(0x20)
++#define USB_INTR_RESET				(0x10)
++#define USB_INTR_SUSPEND			(0x08)
++#define USB_INTR_SETUP_TOKEN		(0x04)
++#define USB_INTR_SOF				(0x02)
++#define USB_INTR_SETUP_TOKEN_VALID	(0x01)
++
++/* UDMA */
++#define RTUSB_UDMA_CTRL				(USB_BASE + 0x800)
++#define RTUSB_UDMA_WRR				(USB_BASE + 0x804)
++
++/* PDMA */
++#define RTUSB_TX_BASE_PTR0        (USB_BASE + 0x1000)
++#define RTUSB_TX_MAX_CNT0         (USB_BASE + 0x1004)
++#define RTUSB_TX_CTX_IDX0         (USB_BASE + 0x1008)
++#define RTUSB_TX_DTX_IDX0         (USB_BASE + 0x100C)
++#define RTUSB_TX_BASE_PTR1        (USB_BASE + 0x1010)
++#define RTUSB_TX_MAX_CNT1         (USB_BASE + 0x1014)
++#define RTUSB_TX_CTX_IDX1         (USB_BASE + 0x1018)
++#define RTUSB_TX_DTX_IDX1         (USB_BASE + 0x101C)
++#define RTUSB_RX_BASE_PTR0        (USB_BASE + 0x1100)
++#define RTUSB_RX_MAX_CNT0         (USB_BASE + 0x1104)
++#define RTUSB_RX_CALC_IDX0        (USB_BASE + 0x1108)
++#define RTUSB_RX_DRX_IDX0         (USB_BASE + 0x110C)
++#define RTUSB_PDMA_GLO_CFG        (USB_BASE + 0x1204)
++
++#define RTUSB_TX_WB_DDONE			(0x1 << 6)
++#define RTUSB_RX_DMA_BUSY			(0x1 << 3)
++#define RTUSB_RX_DMA_EN				(0x1 << 2)
++#define RTUSB_TX_DMA_BUSY			(0x1 << 1)
++#define RTUSB_TX_DMA_EN				(0x1 << 0)
++
++#define RTUSB_PDMA_RST_IDX        (USB_BASE + 0x1208)
++
++#define RTUSB_RST_DRX_IDX1			(0x1 << 17)
++#define RTUSB_RST_DRX_IDX0			(0x1 << 16)
++#define RTUSB_RST_DTX_IDX3			(0x1 << 3)
++#define RTUSB_RST_DTX_IDX2			(0x1 << 2)
++#define RTUSB_RST_DTX_IDX1			(0x1 << 1)
++#define RTUSB_RST_DTX_IDX0			(0x1 << 0)
++
++#define RTUSB_DELAY_INT_CFG       (USB_BASE + 0x120C)
++#define RTUSB_INT_STATUS		  (USB_BASE + 0x1220)
++#define RTUSB_RX_DONE_INT1			(0x1 << 17)
++#define RTUSB_RX_DONE_INT0			(0x1 << 16)
++#define RTUSB_TX_DONE_INT3			(0x1 << 3)
++#define RTUSB_TX_DONE_INT2			(0x1 << 2)
++#define RTUSB_TX_DONE_INT1			(0x1 << 1)
++#define RTUSB_TX_DONE_INT0			(0x1 << 0)
++
++#define RTUSB_INT_MASK			  (USB_BASE + 0x1228)
++#define RTUSB_RX_DONE_INT_MSK1		(0x1 << 17)
++#define RTUSB_RX_DONE_INT_MSK0		(0x1 << 16)
++#define RTUSB_TX_DONE_INT_MSK3		(0x1 << 3)
++#define RTUSB_TX_DONE_INT_MSK2		(0x1 << 2)
++#define RTUSB_TX_DONE_INT_MSK1		(0x1 << 1)
++#define RTUSB_TX_DONE_INT_MSK0		(0x1 << 0)
++
++
++/*=========================================
++      PDMA RX Descriptor Format define
++=========================================*/
++//-------------------------------------------------
++typedef struct _PDMA_RXD_INFO1_  PDMA_RXD_INFO1_T;
++
++struct _PDMA_RXD_INFO1_ {
++    unsigned int    PDP0;
++};
++//-------------------------------------------------
++typedef struct _PDMA_RXD_INFO2_    PDMA_RXD_INFO2_T;
++
++struct _PDMA_RXD_INFO2_ {
++    unsigned int    PLEN1                 : 14;
++    unsigned int    LS1                   : 1;
++    unsigned int    UN_USED               : 1;
++    unsigned int    PLEN0                 : 14;
++    unsigned int    LS0                   : 1;
++    unsigned int    DDONE_bit             : 1;
++};
++//-------------------------------------------------
++typedef struct _PDMA_RXD_INFO3_  PDMA_RXD_INFO3_T;
++
++struct _PDMA_RXD_INFO3_ {
++    unsigned int    PDP1;
++};
++//-------------------------------------------------
++typedef struct _PDMA_RXD_INFO4_    PDMA_RXD_INFO4_T;
++
++struct _PDMA_RXD_INFO4_ {
++    unsigned int        Rx_bcnt:16;
++    unsigned int        Reserved1:8;
++    unsigned int        Out_ep_addr:4;
++    unsigned int        Reserved0:4;
++};
++struct PDMA_rxdesc {
++    PDMA_RXD_INFO1_T rxd_info1;
++    PDMA_RXD_INFO2_T rxd_info2;
++    PDMA_RXD_INFO3_T rxd_info3;
++    PDMA_RXD_INFO4_T rxd_info4;
++};
++/*=========================================
++      PDMA TX Descriptor Format define
++=========================================*/
++//-------------------------------------------------
++typedef struct _PDMA_TXD_INFO1_  PDMA_TXD_INFO1_T;
++
++struct _PDMA_TXD_INFO1_ {
++    unsigned int    SDP0;
++};
++//-------------------------------------------------
++typedef struct _PDMA_TXD_INFO2_    PDMA_TXD_INFO2_T;
++
++struct _PDMA_TXD_INFO2_ {
++    unsigned int    SDL1                  : 14;
++    unsigned int    LS1_bit               : 1;
++    unsigned int    BURST_bit             : 1;
++    unsigned int    SDL0                  : 14;
++    unsigned int    LS0_bit               : 1;
++    unsigned int    DDONE_bit             : 1;
++};
++//-------------------------------------------------
++typedef struct _PDMA_TXD_INFO3_  PDMA_TXD_INFO3_T;
++
++struct _PDMA_TXD_INFO3_ {
++    unsigned int    SDP1;
++};
++//-------------------------------------------------
++typedef struct _PDMA_TXD_INFO4_    PDMA_TXD_INFO4_T;
++struct _PDMA_TXD_INFO4_ {
++    unsigned int        reserved2:17;
++    unsigned int        zlp_flag:1;
++    unsigned int        reserved1:6;
++    unsigned int        In_ep_addr:4;
++    unsigned int        rsv:4;
++};
++
++struct PDMA_txdesc {
++    PDMA_TXD_INFO1_T txd_info1;
++    PDMA_TXD_INFO2_T txd_info2;
++    PDMA_TXD_INFO3_T txd_info3;
++    PDMA_TXD_INFO4_T txd_info4;
++};
++
++
++#ifdef DEBUG
++#define DBG do{ if(debuglevel) printk("%s()\n", __FUNCTION__); }while(0);
++#define DD	do{ printk("%s: %s %d\n", driver_name, __FUNCTION__, __LINE__); } while(0);
++#define xprintk(fmt, args...)	do{ if(debuglevel) printk(fmt, ## args); } while(0);
++#else
++#define DBG
++#define DD
++#define xprintk(fmt, args...)
++#endif
++
++#define FATAL_ERROR(fmt, args...)	do{ printk(fmt, ## args); printk("\n###############  ERROR  #####################\n %s %d\n###############  ERROR  #####################\n",  __FUNCTION__, __LINE__);  BUG(); } while(0)
++
++static void inline dump_usbirq(u32 irqreg)
++{
++	if(irqreg)
++		xprintk("U%s%s%s%s%s%s\n", 
++			(irqreg & USB_INTR_SOF) ? "sof" : "",
++			(irqreg & USB_INTR_RESET) ? " rst" : "",
++			(irqreg & USB_INTR_SUSPEND) ? " sus" : "",
++			(irqreg & USB_INTR_SETUP_TOKEN) ? "st" : "",
++			(irqreg & USB_INTR_SETUP_TOKEN_VALID) ? "sv" : "",
++			(irqreg & USB_INTR_HSPEED) ? " HS" : "");
++
++//  if(irqreg & USB_INTR_SETUP_TOKEN)
++//  	printk("ST\n");
++//  if(irqreg & USB_INTR_SETUP_TOKEN_VALID)
++//  	printk("SV\n");
++
++}
++
++static void inline dump_epirq(u32 irqreg, u32 ienreg, int dir)
++{
++	if(irqreg)
++	xprintk("%s%x\n", dir? "I" : "O", irqreg);
++}
++
++static __inline__ u32 usb_read(u32 addr)
++{
++	return ioread32( (void __iomem *)(USB_BASE + (addr << 2)) );
++}
++
++static __inline__ void usb_write(u32 addr, u32 value)
++{
++	iowrite32(value, (void __iomem *)(USB_BASE + (addr << 2)) );
++}
++
++static __inline__ void reg_write(u32 addr, u32 value)
++{
++	iowrite32(value, (void __iomem *)0x0 + addr);
++}
++
++static __inline__ u32 reg_read(u32 addr)
++{
++	return ioread32( (void __iomem *)0x0 + addr);
++}
++
++
++static void handle_pending_epoutirq(struct rt_udc_struct *rt_usb, struct rt_ep_struct *rt_ep, struct rt_request *req);
++
++/* Debug macros */
++#ifdef DEBUG
++#define DEBUG_REQ
++#define DEBUG_TRX
++#define DEBUG_INIT
++#define DEBUG_EP0
++#define DEBUG_EPX
++#define DEBUG_ERR
++
++#ifdef DEBUG_REQ
++	#define D_REQ(dev, args...)	printk(args)
++#else
++	#define D_REQ(dev, args...)	do {} while (0)
++#endif /* DEBUG_REQ */
++
++#ifdef DEBUG_TRX
++	#define D_TRX(dev, args...)	printk(args)
++#else
++	#define D_TRX(dev, args...)	do {} while (0)
++#endif /* DEBUG_TRX */
++
++#ifdef DEBUG_INIT
++	#define D_INI(dev, args...)	printk(args)
++#else
++	#define D_INI(dev, args...)	do {} while (0)
++#endif /* DEBUG_INIT */
++
++#ifdef DEBUG_EP0
++	static const char *state_name[] = {
++		"IDLE",
++		"IN",
++		"OUT",
++		"NODATA",
++		"STALL"
++	};
++	#define D_EP0(dev, args...) printk(args)
++#else
++	#define D_EP0(dev, args...)	do {} while (0)
++#endif /* DEBUG_EP0 */
++
++#ifdef DEBUG_EPX
++	#define D_EPX(dev, args...)	printk(args)
++#else
++	#define D_EPX(dev, args...)	do {} while (0)
++#endif /* DEBUG_EP0 */
++
++#ifdef DEBUG_ERR
++	#define D_ERR(dev, args...)	printk(args)
++#else
++	#define D_ERR(dev, args...)	do {} while (0)
++#endif
++
++#else
++	#define D_REQ(dev, args...)		do {} while (0)
++	#define D_TRX(dev, args...)		do {} while (0)
++	#define D_INI(dev, args...)		do {} while (0)
++	#define D_EP0(dev, args...)		do {} while (0)
++	#define D_EPX(dev, args...)		do {} while (0)
++	#define dump_ep_intr(x, y, z, i)	do {} while (0)
++	#define dump_intr(x, y, z)		do {} while (0)
++	#define dump_ep_stat(x, y)		do {} while (0)
++	#define dump_usb_stat(x, y)		do {} while (0)
++	#define dump_req(x, y, z)		do {} while (0)
++	#define D_ERR(dev, args...)		do {} while (0)
++#endif /* DEBUG */
++
++#endif /* __LINUX_USB_GADGET_RT_UDC_H */
+diff --git a/drivers/usb/gadget/rt_udc_pdma.c b/drivers/usb/gadget/rt_udc_pdma.c
+new file mode 100644
+index 0000000..d5b89a2
+--- /dev/null
++++ b/drivers/usb/gadget/rt_udc_pdma.c
+@@ -0,0 +1,2547 @@
++/*
++ *	driver/usb/gadget/rt_udc.c
++ *
++ *	Copyright (C) 2009 Ying Yuan Huang, Ralink Tech. <yyhuang@ralink_tech.com>
++ *
++ *	This program is free software; you can redistribute it and/or modify
++ *	it under the terms of the GNU General Public License as published by
++ *	the Free Software Foundation; either version 2 of the License, or
++ *	(at your option) any later version.
++ *
++ *	This program is distributed in the hope that it will be useful,
++ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *	GNU General Public License for more details.
++ */
++
++/*
++ *  1) [ USB composite device ]. The USB PDMA architecture is not suitable for USB composite
++ *     device support. A passive gadget driver(device) may slow down or block other gadget
++ *     (device) because they are in the same ring.
++ */
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/timer.h>
++#include <linux/proc_fs.h>
++#include <linux/usb/ch9.h>
++#include <linux/version.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
++#include <linux/usb_gadget.h>
++#else
++#include <linux/usb/gadget.h>
++#endif
++
++static const char driver_name[] = "rt_udc";
++static const char ep0name[] = "ep0";
++static unsigned debuglevel = 0;
++module_param (debuglevel, uint, S_IRUGO);
++
++#define DEBUG
++#include "rt_udc.h"
++
++#define PROC_DIR				driver_name
++#define DEBUGLEVEL_PROCFILE		"debuglevel"
++static struct proc_dir_entry *pProcDir   = NULL;
++static struct proc_dir_entry *pProcDebugLevel = NULL;
++
++/*
++ * USB PDMA related
++ */
++#define NUM_RX_DESC     256
++#define NUM_TX_DESC     256
++#define RX_BUFF_SZ      1600			/* 1536 */
++#define RING_RESET_TIMEOUT  3000                    /* 3 secs */
++#define RX_RESCHEDULE   64
++#define TX_RESCHEDULE   4
++static unsigned dma = 0;
++module_param (dma, uint, S_IRUGO);
++static unsigned sm = 0;
++module_param (sm, uint, S_IRUGO);
++static unsigned int TXMAXCAP = 512;
++module_param (TXMAXCAP, uint, S_IRUGO);
++
++static struct PDMA_txdesc *tx_ring0_cache = NULL;
++static struct PDMA_rxdesc *rx_ring0_cache = NULL;
++static volatile struct PDMA_rxdesc *rx_ring0_noncache = NULL;
++static volatile struct PDMA_txdesc *tx_ring0_noncache = NULL;
++static dma_addr_t tx_ring_bus_addr;
++static dma_addr_t rx_ring_bus_addr;
++
++static int rx_dma_owner_idx0;                             /* Point to the next RXD DMA wants to use in RXD Ring#0.  */
++static int tx_cpu_owner_idx0;
++static int tx_need_free_idx0;
++
++static volatile unsigned char *USBRxPackets[NUM_RX_DESC];           /* Receive packets */
++static unsigned char tx_zlp_dummy_buf[8];
++struct tasklet_struct rx_dma_tasklet;
++struct tasklet_struct tx_dma_tasklet;
++
++static struct rt_udc_struct controller;
++static struct rt_request *handle_outep(struct rt_ep_struct *rt_ep);
++
++static int debuglevel_read(char *page, char **start, off_t off,int count, int *eof, void *data)
++{
++	int len;
++	sprintf(page, "%d\n", debuglevel);
++	len = strlen(page) + 1;
++	*eof = 1;
++	return len;
++}
++
++static int debuglevel_write(struct file *file, const char *buffer, unsigned long count, void *data)
++{
++	char tmp[32];
++	count = (count > 32) ? 32 : count;
++	memset(tmp, 0, 32);
++	if (copy_from_user(tmp, buffer, count))
++		return -EFAULT;
++	debuglevel = simple_strtol(tmp, 0, 10);
++	return count;
++}
++
++static void ep0_chg_stat(const char *label, struct rt_udc_struct *rt_usb, enum ep0_state stat)
++{
++	xprintk("<0st>%s->%s\n", state_name[rt_usb->ep0state], state_name[stat]);
++
++	if (rt_usb->ep0state == stat)
++		return;
++	rt_usb->ep0state = stat;
++}
++
++static u8 read_epcs(struct rt_ep_struct *rt_ep)
++{
++	int idx = EP_NO(rt_ep);
++	int dir = EP_DIR(rt_ep);
++
++	if(idx == 0)
++		return usb_read(EP0CS);
++
++	return (dir == EP_IN ? usb_read(0x7 + idx*8) : usb_read(0x3 + idx*8) );
++}
++
++static void write_epcs(struct rt_ep_struct *rt_ep, u8 val)
++{
++	int idx = EP_NO(rt_ep);
++	int dir = EP_DIR(rt_ep);
++
++	if(idx == 0)
++		usb_write(EP0CS, val);
++	else
++		(dir == EP_IN ? /*IN */ usb_write(0x7 + idx*8, val) : usb_write(0x3 + idx*8, val) );
++}
++
++static u16 read_inbc(int epnum)
++{
++	u16 low, high = 0;
++	if(epnum == 0){ /* EP0 */
++		low = usb_read(IN0BC);
++	}else{
++		low = usb_read(epnum * 8 + 4);
++		high = usb_read((epnum * 8 + 4)+1);
++	}
++	return (low | (high << 8));
++}
++
++static u16 read_outbc(int epnum)
++{
++	u16 low, high = 0;
++	if(epnum == 0){ /* EP0 */
++		low = usb_read(OUT0BC);
++	}else{
++		low = usb_read(epnum * 8);
++		high = usb_read((epnum * 8)+1);
++	}
++	return (low | (high << 8));
++}
++
++
++static void rt_all_eps_reset(void)
++{
++	// reset(toggle & fifo) all 16 IN & 16 OUT endpoints
++	usb_write(ENDPRST, 0x10);
++	usb_write(ENDPRST, 0x70);
++	usb_write(ENDPRST, 0x00);
++	usb_write(ENDPRST, 0x60);
++}
++
++static void rt_ep_rst(struct rt_ep_struct *rt_ep)
++{
++	u8 reg = 0;
++	u8 idx = EP_NO(rt_ep);
++	u8 dir = EP_DIR(rt_ep);
++	if(dir == EP_IN )
++		reg |= ENDPRST_IO | idx;
++	usb_write(ENDPRST, reg);
++
++	reg |= ENDPRST_TOGRST | ENDPRST_FIFORST;
++	usb_write(ENDPRST, reg);	        
++}
++
++static void rt_ep_irq_enable(struct rt_ep_struct *rt_ep)
++{
++	u8 reg;
++	u8 idx = EP_NO(rt_ep);
++	u8 dir = EP_DIR(rt_ep);
++
++	if(idx == 0 /* ep0 */){
++		usb_write(IN07IEN, (usb_read(IN07IEN) | 0x1) );
++		usb_write(OUT07IEN, (usb_read(OUT07IEN) | 0x1) );
++	}else{   /* epX */
++		reg = usb_read(dir ? IN07IEN : OUT07IEN);
++		reg = reg | (0x1 << idx);
++		usb_write(dir == EP_IN ? IN07IEN : OUT07IEN, reg);
++		reg = usb_read(dir ? IN07IEN : OUT07IEN);
++	}
++}
++
++static void rt_udc_init_ep(struct rt_udc_struct *rt_usb)
++{
++	DBG;
++	if(dma){
++#if defined (CONFIG_RALINK_RT3883) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_MT7620)
++		usb_write(IN1CON, 0x8D);  // InEP1 : Int, 2 subfifos
++		usb_write(IN2CON, 0x89);  // InEP2 : Bulk, 2 subfifos
++		usb_write(OUT1CON, 0x8D);  // OutEP1 : Int, 2 subfifos
++		usb_write(OUT2CON, 0x89);  // OutEP2 : Bulk, 2 subfifos
++		//usb_write(OUT3CON, 0x89);  // OutEP3 : Bulk, 2 subfifos
++		//usb_write(OUT4CON, 0x89);  // OutEP4 : Bulk, 2 subfifos
++#elif defined (CONFIG_RALINK_RT5350)
++		usb_write(IN1CON, 0x89);	// InEP1  : BULK, 2 subfifos
++		usb_write(OUT1CON, 0x89);	// OutEP1 : BULK, 2 subfifos
++#else
++#error	"define a platform"
++#endif
++	}else{
++#if defined (CONFIG_RALINK_RT3883) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_MT7620)
++		usb_write(IN1CON, 0x8C);	// InEP1 : Int  , 1 subfifos
++		usb_write(IN2CON, 0x88);	// InEP2 : Bulk, 1 subfifo
++		usb_write(OUT1CON, 0x8C);	// OutEP1 : Int, 1 subfifos
++		usb_write(OUT2CON, 0x88);	// OutEP2 : Bulk, 1 subfifos
++		//usb_write(OUT3CON, 0x88);	// OutEP3 : Bulk, 1 subfifo
++		//usb_write(OUT4CON, 0x88);	// OutEP4 : Bulk. 1 subfifo
++
++#elif defined (CONFIG_RALINK_RT5350)
++		usb_write(IN1CON, 0x88);	// InEP1  : BULK  , 1 subfifos
++		usb_write(OUT1CON, 0x88);	// OutEP1 : BULK, 1 subfifos
++#else
++#error	"define a platform"
++#endif
++	}
++	// clear all pending HW interrupts
++	usb_write(IN07IRQ, 0xFF);
++	usb_write(OUT07IRQ, 0xFF);
++	rt_all_eps_reset();
++	rt_ep_irq_enable(&rt_usb->rt_ep[0]);
++}
++
++static void rt_udc_init_fifo(struct rt_udc_struct *rt_usb)
++{
++	// fifo control
++	if(dma){
++		usb_write(FIFOCTRL, 0x31);	// INEP1, Autoin = 1
++		usb_write(FIFOCTRL, 0x32);	// INEP2, Autoin = 1
++		usb_write(FIFOCTRL, 0x21);	// OUTEP1, Autoin = 1
++		usb_write(FIFOCTRL, 0x22);	// OUTEP2, Autoin = 1
++		//usb_write(FIFOCTRL, 0x23);// OUTEP3, Autoin = 1
++		//usb_write(FIFOCTRL, 0x24);// OUTEP4, Autoin = 1
++
++		usb_write(FIFOCTRL, 0x00);	// Access by DMA
++	}else{
++		usb_write(FIFOCTRL, 0x11);	// INEP1, Autoin = 0
++		usb_write(FIFOCTRL, 0x12);	// INEP2, Autoin = 0
++		usb_write(FIFOCTRL, 0x01);	// OUTEP1, Autoin = 0
++		usb_write(FIFOCTRL, 0x02);	// OUTEP2, Autoin = 0
++		//usb_write(FIFOCTRL, 0x03);// OUTEP3, Autoin = 0
++		//usb_write(FIFOCTRL, 0x04);// OUTEP4, Autoin = 0
++
++		usb_write(FIFOCTRL, 0x80);	// Access by CPU
++	}
++}
++
++static void rt_udc_init(struct rt_udc_struct *rt_usb)
++{
++	/* Setup & Init endpoints */
++	rt_udc_init_ep(rt_usb);
++
++	// Enable HS, reset, suspend, SETUP valid data interrupt
++	usb_write(USBIRQ, 0xff);			// clear first
++	usb_write(USBIEN, 0x21);
++
++	/* Setup ep fifos */
++	rt_udc_init_fifo(rt_usb);
++}
++
++static void rt_ep_irq_disable(struct rt_ep_struct *rt_ep)
++{
++	u8 reg;
++	u8 idx = EP_NO(rt_ep);
++	u8 dir = EP_DIR(rt_ep);
++
++	if(idx == 0 /* ep0 */){
++		usb_write(IN07IEN, (usb_read(IN07IEN) & ~(0x1)) );
++		usb_write(OUT07IEN, (usb_read(OUT07IEN) & ~(0x1)) );
++	}else{
++		reg = usb_read(dir ? IN07IEN : OUT07IEN);
++		reg = reg & ~(0x1 << idx);
++		usb_write(dir == EP_IN ? IN07IEN : OUT07IEN, reg);
++		reg = usb_read(dir ? IN07IEN : OUT07IEN);
++	}
++}
++
++static u32 rt_fifo_bcount(struct rt_ep_struct *rt_ep)
++{
++	u8 low, high;
++	u32 rc;
++
++	int idx = EP_NO(rt_ep);
++	int dir = EP_DIR(rt_ep);
++
++	if(idx == 0)
++		return 0;
++
++	if(dir /* IN */){
++		low = usb_read(0x004 + idx*8);
++		high = usb_read( (0x004 + idx*8)+1 );
++	}else{  /* OUT */
++		low = usb_read(0x000 + idx*8);
++		high = usb_read( (0x000 + idx*8)+1 );
++	}
++	rc = high | low;
++	return rc;
++}
++
++void rt_flush(struct rt_ep_struct *rt_ep)
++{
++	rt_ep_rst(rt_ep);
++}
++
++void rt_ep_stall(struct rt_ep_struct *rt_ep, int value)
++{
++	u8 tmp;
++	u32 addr;
++	int idx = EP_NO(rt_ep);
++	int dir = EP_DIR(rt_ep);
++
++	if(idx == 0){
++		tmp = usb_read(EP0CS);
++		if(value)
++		tmp |= 0x1;
++		else
++			tmp &= ~(0x1);
++		usb_write(EP0CS, tmp);
++	}else{
++		addr = (dir == EP_IN ? 0x006 : 0x002) + idx * 8;
++		tmp = usb_read(addr);
++		if(value)
++		tmp |= 0x40;
++		else
++			tmp &= ~(0x40);
++		usb_write(addr, tmp);
++	}
++
++	return;
++}
++
++static int rt_udc_get_frame(struct usb_gadget *_gadget)
++{
++	return 0;
++}
++
++static int rt_udc_wakeup(struct usb_gadget *_gadget)
++{
++	DBG;
++	return 0;
++}
++
++
++/*******************************************************************************
++ * USB request control functions
++ *******************************************************************************
++ */
++static inline void ep_add_request(struct rt_ep_struct *rt_ep, struct rt_request *req)
++{
++	if (unlikely(!req))
++		return;
++	req->in_use = 1;
++	req->zlp_dma_done = 0;
++	req->rt_ep = rt_ep;
++	list_add_tail(&req->queue, &rt_ep->queue);
++}
++
++static inline void ep_del_request(struct rt_ep_struct *rt_ep, struct rt_request *req)
++{
++	if (unlikely(!req))
++		return;
++	list_del_init(&req->queue);
++	req->zlp_dma_done = 0;
++	req->in_use = 0;
++}
++
++static void done(struct rt_ep_struct *rt_ep, struct rt_request *req, int status)
++{
++	ep_del_request(rt_ep, req);
++
++	if (likely(req->req.status == -EINPROGRESS))
++		req->req.status = status;
++	else
++		status = req->req.status;
++
++	if (status && status != -ESHUTDOWN)
++		D_ERR(rt_ep->rt_usb->dev, "<%s> complete %s req %p stat %d len %u/%u\n", __func__, rt_ep->ep.name, &req->req, status,req->req.actual, req->req.length);
++
++	req->req.complete(&rt_ep->ep, &req->req);
++}
++
++#if 0
++/* for reference */
++struct tasklet_struct rx_tasklet_tmp;
++static void rx_done_do_tasklet(unsigned long arg)
++{
++	struct rt_ep_struct 	*rt_ep;
++	struct rt_request 		*rt_req;
++	struct usb_request 		*usb_req;
++	struct usb_ep 			*ep;
++	int						i, rx_count, status = 0;
++	struct rt_udc_struct 	*rt_usb = &controller;
++
++	for (i = (IN_EP_NUM+1); i < RT_USB_NB_EP; i++) {
++		rt_ep = &rt_usb->rt_ep[i];
++		ep = &rt_ep->ep;
++
++		// shared by irq handler, protect it
++		spin_lock_irqsave(&rx_done_lock, rx_done_lock_flags);
++		rx_count = rt_ep->rx_done_count;
++
++		//spin_unlock_irqrestore(&rx_done_lock, rx_done_lock_flags);
++
++		for (;rx_count > 0; rx_count--) {
++			if(unlikely(list_empty(&rt_ep->queue)))
++				FATAL_ERROR("empty queue");
++
++			rt_req = list_entry(rt_ep->queue.next, struct rt_request, queue);
++			usb_req = &rt_req->req;
++
++			ep_del_request(rt_ep, rt_req);
++			rt_ep->rx_done_count--;
++
++			spin_unlock_irqrestore(&rx_done_lock, rx_done_lock_flags);
++
++			if (unlikely(rt_req->req.status == -EINPROGRESS))
++				rt_req->req.status = status;
++			else
++				status = rt_req->req.status;
++
++			if (unlikely(status && status != -ESHUTDOWN))
++				D_ERR(rt_ep->rt_usb->dev, "<%s> complete %s req %p stat %d len %u/%u\n", __func__, rt_ep->ep.name, &rt_req->req, status,rt_req->req.actual, rt_req->req.length);
++
++			// indicate gadget driver.
++			usb_req->complete(ep, usb_req);
++
++			spin_lock_irqsave(&rx_done_lock, rx_done_lock_flags);
++		}
++		spin_unlock_irqrestore(&rx_done_lock, rx_done_lock_flags);
++    }
++}
++#endif
++
++struct tasklet_struct tx_tasklet;
++static void tx_do_tasklet(unsigned long arg)
++{
++	return;
++}
++
++struct tasklet_struct rx_tasklet;
++static void rx_do_tasklet(unsigned long arg)
++{
++	struct rt_ep_struct 	*rt_ep;
++	struct rt_request 		*req;
++	struct usb_ep 			*ep;
++	int						i;
++	struct rt_udc_struct 	*rt_usb = &controller;
++
++	for (i = (IN_EP_NUM+1/* EP0 */); i < RT_USB_NB_EP; i++){
++		u8 epcs;
++		rt_ep = &rt_usb->rt_ep[i];
++		ep = &rt_ep->ep;
++
++		epcs = read_epcs(rt_ep);        
++		while(!(epcs & EP_CS_BSY)){
++			req = handle_outep(rt_ep);
++			if(!req){
++				// No usb request found.
++				// Just set up the flag (pending) and clear int.
++				rt_ep->pending = 1;
++				break;
++	        }else{
++				if(req && ( (req->req.actual % rt_ep->ep.maxpacket) || (req->req.actual >= req->req.length))){
++					xprintk("q.l=%d,q.a=%d\n", req->req.length, req->req.actual);
++					done(rt_ep, req, 0);
++				}
++			}
++
++	        epcs = read_epcs(rt_ep);
++	        write_epcs(rt_ep, 0x0);
++			epcs = read_epcs(rt_ep);
++		}
++    }
++}
++
++static void nuke(struct rt_ep_struct *rt_ep, int status)
++{
++	struct rt_request *req;
++
++	DBG;
++	while (!list_empty(&rt_ep->queue)) {
++		req = list_entry(rt_ep->queue.next, struct rt_request, queue);
++		done(rt_ep, req, status);
++	}
++}
++
++/*
++ *******************************************************************************
++ * Data tansfer over USB functions
++ *******************************************************************************
++ */
++static int read_ep0_fifo(struct rt_ep_struct *rt_ep, struct rt_request *req)
++{
++	u8	*buf;
++	int	byte_count, req_bufferspace, count, i;
++
++DBG;
++	if(!in_irq())
++		FATAL_ERROR("not irq context.");
++
++	byte_count = read_outbc(EP_NO(rt_ep));
++	req_bufferspace = req->req.length - req->req.actual;
++
++	buf = req->req.buf + req->req.actual;
++
++	if(!req_bufferspace)
++		FATAL_ERROR("zlp");
++
++	if(byte_count > req_bufferspace)
++		FATAL_ERROR("buffer overflow, byte_count=%d, req->req.length=%d, req->req.actual=%d\n", byte_count, req->req.length ,req->req.actual);
++
++	count = min(byte_count, req_bufferspace);
++
++	//test, Access by CPU
++	if(dma)
++		usb_write(FIFOCTRL, 0x80);
++
++	for (i = 0; i < count; i++){
++		*buf = usb_read(EP0OUTDAT+i);
++		buf++;
++	}
++	req->req.actual += count;
++
++	//test, Access by DMA
++	if(dma)
++		usb_write(FIFOCTRL, 0x00);
++
++	return count;
++}
++
++
++static int read_ep_fifo(struct rt_ep_struct *rt_ep, struct rt_request *req)
++{
++	u8	*buf, ep_no, ep_no_shift;
++	int	byte_count, req_bufferspace, count, i;
++
++DBG;
++	ep_no = EP_NO(rt_ep);
++
++	byte_count = read_outbc(ep_no);
++	if(unlikely(!byte_count))
++		FATAL_ERROR("ep_no:%d bc = 0", ep_no);
++
++	req_bufferspace = req->req.length - req->req.actual;
++
++	buf = req->req.buf + req->req.actual;
++
++	if(unlikely(!req_bufferspace))
++		FATAL_ERROR("zlp");
++
++	xprintk("bc=%d,r.l=%d,r.a=%d\n", byte_count, req->req.length ,req->req.actual);
++	if(unlikely(byte_count > req_bufferspace))
++		FATAL_ERROR("buffer overflow, byte_count=%d, req->req.length=%d, req->req.actual=%d\n", byte_count, req->req.length ,req->req.actual);
++
++	count = min(byte_count, req_bufferspace);
++
++	ep_no_shift = 0x80+ep_no * 4;
++	for (i = 0; i < count; i++){
++		*buf = usb_read(ep_no_shift);
++		buf++;
++	}
++
++	req->req.actual += count;
++
++	// EP Out irq handler would arm another transaction.
++	return count;
++}
++
++static int write_ep_fifo_zlp(struct rt_ep_struct *rt_ep)
++{
++	u8	epcs;
++	int	ep_no = EP_NO(rt_ep);
++
++DBG;
++	xprintk("w%d ZLP\n", EP_NO(rt_ep));
++	epcs = read_epcs(rt_ep);
++	if(epcs & EP_CS_BSY)
++		FATAL_ERROR("EP%d busy. cs=%x\n", ep_no, epcs);
++
++	/* check INEP byte count is zero? */
++	if(read_inbc(ep_no))
++		FATAL_ERROR("EP%d bc zero. bc=%d\n", ep_no, read_inbc(ep_no));
++
++	epcs = read_epcs(rt_ep);
++	write_epcs(rt_ep, epcs);
++	return 0;
++}
++
++
++/*
++ * handle_epinirq()
++*/
++static int write_ep_fifo(struct rt_ep_struct *rt_ep, struct rt_request *req)
++{
++	u8	*buf, epcs;
++	int	length, i, ep_no = EP_NO(rt_ep);
++
++DBG;
++	xprintk("w ep%d req=%p,r.l=%d,r.a=%d\n",EP_NO(rt_ep),&req->req,req->req.length,req->req.actual);
++	epcs = read_epcs(rt_ep);
++	if(epcs & EP_CS_BSY)
++		FATAL_ERROR("EP%d busy. epcs=%x\n", ep_no, epcs);
++
++	/* check INEP byte count is zero? */
++	if(read_inbc(ep_no))
++		FATAL_ERROR("EP%d bc=%d\n", ep_no, read_inbc(ep_no));
++
++	buf = req->req.buf + req->req.actual;
++	length = (req->req.length - req->req.actual) < rt_ep->ep.maxpacket ? (req->req.length - req->req.actual) : rt_ep->ep.maxpacket;
++	req->req.actual += length;
++	if (!length) {	/* zlp */
++		// for debug
++		xprintk("<%s> zero packet\n", __func__);
++		write_ep_fifo_zlp(rt_ep);
++		return 0;
++	}
++
++	// write to ep in fifo
++	for (i=0; i< length; i++)
++		usb_write(0x80+ep_no*4, *buf++);
++
++	epcs = read_epcs(rt_ep);
++	write_epcs(rt_ep, epcs);
++
++	return length;
++}
++
++/*
++ *
++ */
++static int write_ep0_fifo(struct rt_ep_struct *rt_ep, struct rt_request *req)
++{
++	u8	*buf;
++	int	length, i;
++	u32 maxpacket;
++
++DBG;
++	xprintk("q.l=%d, q.a=%d, maxp=%d\n", req->req.length, req->req.actual, rt_ep->ep.maxpacket);
++
++	buf = req->req.buf + req->req.actual;
++	maxpacket = (u32)(rt_ep->ep.maxpacket);
++	length = min(req->req.length - req->req.actual, maxpacket);
++
++	req->req.actual += length;
++
++	if (!length && req->req.zero)
++		FATAL_ERROR("zlp");
++
++	if(!in_irq())
++		FATAL_ERROR("Not in irq context");
++
++	//test, Access by CPU
++	if(dma)
++		usb_write(FIFOCTRL, 0x80);
++
++	//write to ep0in fifo
++	for (i=0; i< length; i++)
++		usb_write(EP0INDAT+i, *buf++);
++
++	// arm ep0in
++	usb_write(IN0BC, length);
++	if(length != rt_ep->ep.maxpacket)
++		usb_write(EP0CS, 0x2);		// clear NAK bit to ACK host.
++
++	//test, Access by CPU
++	if(dma)
++		usb_write(FIFOCTRL, 0x00);
++
++	return length;
++}
++
++static struct rt_request *get_unhandled_req(struct rt_ep_struct *rt_ep)
++{
++	struct list_head *p;
++	struct rt_request *req = NULL;
++
++	if(EP_DIR(rt_ep) == EP_OUT)
++		FATAL_ERROR("Out EP");
++
++	if(dma){
++		list_for_each(p, &rt_ep->queue){
++			req = list_entry(p, struct rt_request, queue);
++			if(req->req.length > req->req.actual )
++				return req;
++			else if(unlikely(req->req.length == 0 && req->zlp_dma_done == 0))
++				return req;
++			else
++				continue;
++		}
++		return NULL;
++	}else{
++		if (!list_empty(&rt_ep->queue)){
++			req = list_entry(rt_ep->queue.next, struct rt_request, queue);
++		}else {
++			FATAL_ERROR("%s No request", rt_ep->ep.name);
++		}
++		return req;
++	}
++}
++
++#define PADDING_LENGTH 64
++static int write_dma_txring(struct rt_ep_struct *rt_ep,struct rt_request *req)
++{
++	u8 *buf;
++	int length;
++	int retry_times = 0;
++	u32 hw_current_idx;
++DBG;
++	xprintk("w%dr=%p,r.l=%d,r.a=%d\n", EP_NO(rt_ep), &req->req,req->req.length,req->req.actual);
++
++	length = req->req.length;
++
++	while(length > 0 || (req->req.length == 0 && req->zlp_dma_done == 0)){
++retry:
++	/* wait for a free TXD */
++	hw_current_idx = reg_read(RTUSB_TX_DTX_IDX0);
++	if ( tx_ring0_cache[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0 ||
++		((tx_cpu_owner_idx0+1) % NUM_TX_DESC == hw_current_idx) ) {
++		if(retry_times > 1000)
++			return -1;
++		mdelay(1);
++		retry_times++;
++		goto retry;
++	}
++
++		if(length > TXMAXCAP)
++			length = TXMAXCAP;
++
++		buf = req->req.buf + req->req.actual;
++		req->req.actual += length;
++
++	/* deal with ZLP.*/
++		if(req->req.length == 0 && req->zlp_dma_done == 0)
++		req->zlp_dma_done = 1;
++
++		req->txd_count++;
++
++#define phys_to_bus(a) ((u32)a & 0x1FFFFFFF)
++		if(length){
++			tx_ring0_cache[tx_cpu_owner_idx0].txd_info1.SDP0 = cpu_to_le32(phys_to_bus(buf));
++			tx_ring0_cache[tx_cpu_owner_idx0].txd_info2.SDL0 = cpu_to_le32(length);
++			tx_ring0_cache[tx_cpu_owner_idx0].txd_info4.zlp_flag = 0;
++			dma_cache_sync(NULL, (void *)buf, length, DMA_TO_DEVICE);
++		}else{
++			tx_ring0_cache[tx_cpu_owner_idx0].txd_info1.SDP0 = cpu_to_le32(phys_to_bus(tx_zlp_dummy_buf));
++			tx_ring0_cache[tx_cpu_owner_idx0].txd_info2.SDL0 = cpu_to_le32(sizeof(tx_zlp_dummy_buf));
++			tx_ring0_cache[tx_cpu_owner_idx0].txd_info4.zlp_flag = 1;
++		}
++
++		tx_ring0_cache[tx_cpu_owner_idx0].txd_info4.In_ep_addr = cpu_to_le32(EP_NO(rt_ep));
++		tx_ring0_cache[tx_cpu_owner_idx0].txd_info2.DDONE_bit = 0;
++		tx_cpu_owner_idx0 = (tx_cpu_owner_idx0 + 1) % NUM_TX_DESC;
++
++		length = req->req.length - req->req.actual;
++	}
++
++	reg_write(RTUSB_TX_CTX_IDX0, tx_cpu_owner_idx0);
++
++	return 0;
++}
++
++
++/*******************************************************************************
++ * Endpoint handlers
++ *******************************************************************************
++ */
++
++/*
++ *  Handle In Endpoint
++ *  CPU(FIFO):
++ *			Enqueue -> Write fifo -> TX_DONE -> Write fifo -> TX_DONE -> ..
++ *
++ *  DMA
++ *			Enqueue -> Kick off TxD.   Enqueue -> Kick off TxD.   Enqueue -> Kick off TxD. 
++ */
++static int handle_inep(struct rt_ep_struct *rt_ep)
++{
++	struct rt_request *req;
++
++DBG;
++	if(!(req = get_unhandled_req(rt_ep)))
++		return -1;
++
++	if(dma){
++		write_dma_txring(rt_ep, req);
++	}else{
++		write_ep_fifo(rt_ep, req);
++		rt_ep->tx_done_count = 1;
++	}
++	return 0;
++}
++
++/*
++ * IRQ context.
++ */
++static struct rt_request *handle_outep(struct rt_ep_struct *rt_ep)
++{
++	struct rt_request *req;
++	struct list_head *p;
++	int count = 0;
++
++DBG;
++	if (list_empty(&rt_ep->queue)){
++		return NULL;
++	}
++
++	list_for_each(p, &rt_ep->queue){
++		if(count != rt_ep->rx_done_count){
++			count++;       
++			continue;
++		}
++		req = list_entry(p, struct rt_request, queue);
++		read_ep_fifo(rt_ep, req);
++		return req;
++	}
++
++	return NULL;
++}
++
++static struct rt_request *handle_inep0(struct rt_ep_struct *rt_ep)
++{
++	struct rt_request *req = NULL;
++
++DBG;
++	if (list_empty(&rt_ep->queue)) {
++		D_ERR(rt_ep->rt_usb->dev, "<%s> no request on %s\n", __func__, rt_ep->ep.name);
++		return NULL;
++	}
++
++	req = list_entry(rt_ep->queue.next, struct rt_request, queue);
++	switch (rt_ep->rt_usb->ep0state) {
++		case EP0_IN_DATA_PHASE:			/* GET_DESCRIPTOR */
++			write_ep0_fifo(rt_ep, req);
++			break;
++
++		// Impossible:
++		//case EP0_OUT_DATA_PHASE:		/* SET_DESCRIPTOR */
++		//case EP0_NO_DATA_PHASE:		/* for no data stage control transfer */
++
++		default:
++			D_ERR(rt_ep->rt_usb->dev, "<%s> ep0 i/o, odd state %d\n", __func__, rt_ep->rt_usb->ep0state);
++			ep_del_request(rt_ep, req);
++			req = NULL;
++			break;
++	}
++
++	return req;
++}
++
++static struct rt_request *handle_outep0(struct rt_ep_struct *rt_ep)
++{
++	struct rt_request *req = NULL;
++
++DBG;
++	if (list_empty(&rt_ep->queue)) {
++		D_ERR(rt_ep->rt_usb->dev, "<%s> no request on %s\n", __func__, rt_ep->ep.name);
++		return NULL;
++	}
++
++	if(rt_ep->rt_usb->ep0state != EP0_OUT_DATA_PHASE){
++		D_EP0(rt_ep->rt_usb->dev, "<%s> ep0 i/o, odd state %d\n", __func__, rt_ep->rt_usb->ep0state);
++		ep_del_request(rt_ep, req);
++		req = NULL;
++	}
++
++	req = list_entry(rt_ep->queue.next, struct rt_request, queue);
++
++	read_ep0_fifo(rt_ep, req);
++
++	return req;
++}
++
++/*******************************************************************************
++ * USB gadget callback functions
++ *******************************************************************************
++ */
++static void handle_dma_rxdone(struct rt_udc_struct *rt_usb)
++{
++	DBG;
++	tasklet_schedule(&rx_dma_tasklet);
++}
++
++static void handle_dma_txdone(struct rt_udc_struct *rt_usb)
++{
++	DBG;
++	tasklet_schedule(&tx_dma_tasklet);
++}
++
++static void handle_dmairq(struct rt_udc_struct *rt_usb, u32 irq)
++{
++	if(irq & RTUSB_RX_DONE_INT0){
++		handle_dma_rxdone(rt_usb);
++	}
++
++	if(irq & RTUSB_TX_DONE_INT0){
++		handle_dma_txdone(rt_usb);
++	}
++
++	reg_write(RTUSB_INT_STATUS, irq);
++}
++
++static inline int udc_dma_reset_txring(void)
++{
++    int count = 0;
++    u32 reg;
++
++    while(count++< RING_RESET_TIMEOUT){
++        reg = reg_read(RTUSB_PDMA_GLO_CFG);
++        if(reg & RTUSB_TX_DMA_BUSY){
++            mdelay(1);
++        }else
++            break;
++
++    }
++    if(count== RING_RESET_TIMEOUT)
++        return -1;
++
++    reg = reg_read(RTUSB_PDMA_RST_IDX);
++    udelay(100);
++    reg |= (RTUSB_RST_DTX_IDX1 | RTUSB_RST_DTX_IDX0);
++    reg_write(RTUSB_PDMA_RST_IDX, reg);
++    udelay(100);
++    return 0;
++}
++
++static inline int udc_dma_reset_rxring(void)
++{
++    int count = 0;
++    u32 reg;
++
++    while(count++< RING_RESET_TIMEOUT){
++        reg = reg_read(RTUSB_PDMA_GLO_CFG);
++        if(reg & RTUSB_RX_DMA_BUSY){
++            mdelay(1);
++        }else
++            break;
++    }
++    if(count== RING_RESET_TIMEOUT)
++        return -1;
++
++    reg = reg_read(RTUSB_PDMA_RST_IDX);
++    udelay(100);
++    reg |= (RTUSB_RST_DRX_IDX1 | RTUSB_RST_DRX_IDX0);
++    reg_write(RTUSB_PDMA_RST_IDX, reg);
++    udelay(100);\
++    return 0;
++}
++
++static int udc_dma_hw_reset(void)
++{
++    if(udc_dma_reset_rxring() == -1)
++        return -1;
++    if(udc_dma_reset_txring() == -1)
++        return -1;
++    return 0;
++}
++
++static void udc_dma_enable(int enable)
++{
++    u32 reg;
++    reg = reg_read(RTUSB_PDMA_GLO_CFG);
++    udelay(100);
++    if(enable)
++        reg |= RTUSB_TX_WB_DDONE | RTUSB_RX_DMA_EN | RTUSB_TX_DMA_EN ;
++    else
++        reg &= ~(RTUSB_TX_WB_DDONE | RTUSB_RX_DMA_EN | RTUSB_TX_DMA_EN) ;
++    reg_write(RTUSB_PDMA_GLO_CFG, reg);
++    udelay(500);
++}
++
++static void udc_dma_int_enable(int enable)
++{
++    u32 reg;
++    reg = reg_read(RTUSB_INT_MASK);
++    udelay(100);
++    if(enable)
++        reg |=  RTUSB_RX_DONE_INT_MSK0 | RTUSB_TX_DONE_INT_MSK0 ;
++    else
++        reg &= ~(RTUSB_RX_DONE_INT_MSK0 | RTUSB_TX_DONE_INT_MSK0) ;
++    reg_write(RTUSB_INT_MASK, reg);
++    udelay(100);
++}
++
++static inline void udc_dma_tx_int_clear(void)
++{
++    reg_write(RTUSB_INT_STATUS, 0x0000000F);
++}
++
++static inline void udc_dma_rx_int_clear(void)
++{
++    reg_write(RTUSB_INT_STATUS, 0x00030000);
++}
++
++static inline void udc_dma_all_int_clear(void)
++{
++    reg_write(RTUSB_INT_STATUS, 0xFFFFFFFF);
++}
++
++static int copy_data_to_ep(void *src, int length, int ep_num)
++{
++	struct rt_ep_struct *rt_ep;
++	struct rt_udc_struct *rt_usb = &controller;
++	struct rt_request *req;
++	int req_bufferspace, count;
++	u8 *buf;
++
++	DBG;
++	rt_ep = &rt_usb->rt_ep[ep_num+IN_EP_NUM];
++
++	if (list_empty(&rt_ep->queue)){
++		/* It is safe to return 0 if no req queued. */
++		return 0;
++	}
++
++	req = list_entry(rt_ep->queue.next, struct rt_request, queue);
++	req_bufferspace = req->req.length - req->req.actual;
++
++    if(unlikely(!req_bufferspace)){
++        // for debug
++        FATAL_ERROR("zlp");
++        return -1;
++    }
++
++    if(length > req_bufferspace){
++        FATAL_ERROR("buffer overflow");
++        return -1;
++    }
++
++    // sync with cache.
++    if(likely(length))
++        dma_cache_sync(NULL, src, length, DMA_FROM_DEVICE);
++
++    buf = req->req.buf + req->req.actual;
++    count = min(length, req_bufferspace);
++    memcpy(buf, src, count);
++
++    req->req.actual += count;
++
++	if((req->req.actual % rt_ep->ep.maxpacket) || (req->req.actual >= req->req.length)){
++		done(rt_ep, req, 0);    // short packet indicates transaction is done.
++	}
++    return count;
++}
++
++static void rx_dma_done_do_tasklet(unsigned long arg)
++{
++	u32 *rxd_info;
++	u32 length;
++	int ep, rc;
++	int processed_count=0;
++
++	DBG;
++	for (;;){
++		if (rx_ring0_cache[rx_dma_owner_idx0].rxd_info2.DDONE_bit == 0)
++			break;
++
++		if(processed_count++ > RX_RESCHEDULE){
++			tasklet_schedule(&rx_dma_tasklet);
++			break;
++		}
++
++		length = rx_ring0_cache[rx_dma_owner_idx0].rxd_info4.Rx_bcnt;
++		ep = rx_ring0_cache[rx_dma_owner_idx0].rxd_info4.Out_ep_addr;
++
++		// copy data from RXD->buffer to ep queue.
++		rc = copy_data_to_ep((void *)USBRxPackets[rx_dma_owner_idx0], length, ep);
++		if(rc <= 0)
++			return;
++
++		rxd_info = (u32 *)&rx_ring0_cache[rx_dma_owner_idx0].rxd_info4;
++		*rxd_info = 0;
++
++		/* clear DDONE bit*/
++		rxd_info = (u32 *)&rx_ring0_cache[rx_dma_owner_idx0].rxd_info2;
++		*rxd_info = 0;
++		//rx_ring0_cache[rx_dma_owner_idx0].rxd_info2.DDONE_bit = 0;
++		//rx_ring0_cache[i].rxd_info2.LS0= 0;
++		rx_ring0_cache[rx_dma_owner_idx0].rxd_info2.PLEN0= sizeof(u8) * RX_BUFF_SZ;
++
++		/*  Move point to next RXD which wants to alloc */
++		//OUTL(cpu_to_le32((u32) rx_dma_owner_idx0), RTUSB_RX_CALC_IDX0);
++		reg_write(RTUSB_RX_CALC_IDX0, rx_dma_owner_idx0);
++
++		/* Update to Next packet point that was received.
++		*/
++		rx_dma_owner_idx0 = (rx_dma_owner_idx0 + 1) % NUM_RX_DESC;
++    }
++}
++
++/*
++ *  Recycle reqs and call gadget complete callback function.
++ */
++static void tx_dma_done_do_tasklet(unsigned long arg)
++{
++	int ep_num;
++	u32 hw_current;
++	struct rt_ep_struct *rt_ep;
++	struct rt_request   *rt_req;
++	struct rt_udc_struct *rt_usb = &controller;
++
++	DBG;
++	while(tx_need_free_idx0 != (hw_current = reg_read(RTUSB_TX_DTX_IDX0))){
++		int retry = 0;
++		while(tx_ring0_cache[tx_need_free_idx0].txd_info2.DDONE_bit != 1){
++			mdelay(1);
++			retry++;
++			if(retry > 1000)
++				FATAL_ERROR("tx timeout");
++		}
++
++		// rt_ep = tx_ring0_req_mapping[tx_need_free_idx0];
++		ep_num = tx_ring0_cache[tx_need_free_idx0].txd_info4.In_ep_addr;
++		if(!ep_num || ep_num > IN_EP_NUM)
++			FATAL_ERROR("Out of range");
++
++		rt_ep = &rt_usb->rt_ep[ep_num];
++		if(list_empty(&rt_ep->queue))
++			FATAL_ERROR("ep[%d] No request", ep_num);
++
++		rt_req = list_entry(rt_ep->queue.next, struct rt_request, queue);
++		rt_req->txd_count--;
++
++
++		if(rt_req->txd_count == 0)
++			done(rt_ep, rt_req, 0);
++
++		tx_need_free_idx0 = (tx_need_free_idx0 + 1) % NUM_TX_DESC;
++
++	}
++}
++
++static int udc_dma_rst(void)
++{
++	if( udc_dma_reset_txring() == -1)
++		return -1;
++	if( udc_dma_reset_rxring() == -1)
++		return -1;
++
++	tx_cpu_owner_idx0 = 0;
++	tx_need_free_idx0 = 0;
++	rx_dma_owner_idx0 = 0;
++	reg_write(RTUSB_RX_CALC_IDX0, cpu_to_le32(NUM_RX_DESC - 1));
++	return 0;
++}
++
++static int rt_udc_dma_init(void)
++{
++	int i;
++	
++	if( udc_dma_hw_reset() == -1)
++		return -1;
++
++	for(i=0; i<NUM_RX_DESC; i++){
++		USBRxPackets[i]  = kmalloc(sizeof(u8) * RX_BUFF_SZ, GFP_ATOMIC | GFP_DMA); // todo: use  GFP_KERNEL instead.
++		if(!USBRxPackets[i]){
++			for(i=i-1; i>=0; i--)
++				kfree((void *)USBRxPackets[i]);
++			printk("No mem.");
++			return -1;
++		}
++	}
++
++	tx_ring0_cache = dma_alloc_coherent(NULL, sizeof(struct PDMA_txdesc) * NUM_TX_DESC, &tx_ring_bus_addr, GFP_KERNEL);
++	rx_ring0_cache = dma_alloc_coherent(NULL, sizeof(struct PDMA_rxdesc) * NUM_RX_DESC, &rx_ring_bus_addr, GFP_KERNEL);
++
++	printk("USB PDMA mode enabled.\n");
++	printk("tx_ring=%p\n", tx_ring0_cache);
++	printk("rx_ring=%p\n", rx_ring0_cache);
++
++	tx_ring0_noncache = tx_ring0_cache;
++	rx_ring0_noncache = rx_ring0_cache;
++
++	for(i=0; i < NUM_RX_DESC; i++){
++		memset((void *)&rx_ring0_noncache[i], 0, 16 /* sizeof()*/);
++		rx_ring0_noncache[i].rxd_info2.DDONE_bit = 0;
++		rx_ring0_noncache[i].rxd_info2.LS0= 0;
++		rx_ring0_noncache[i].rxd_info2.PLEN0= sizeof(u8) * RX_BUFF_SZ;
++		rx_ring0_noncache[i].rxd_info1.PDP0 = dma_map_single(NULL, (void *)USBRxPackets[i], sizeof(u8) * RX_BUFF_SZ, DMA_FROM_DEVICE);
++	}
++
++	for (i=0; i < NUM_TX_DESC; i++) {
++		memset((void *)&tx_ring0_noncache[i],0, 16 /* sizeof()*/);
++		tx_ring0_noncache[i].txd_info2.LS0_bit = 1;
++		tx_ring0_noncache[i].txd_info2.DDONE_bit = 1;
++		// we would map dma buffer dynamically in IRQ handler & ep_queue();
++	}
++
++	rx_dma_owner_idx0 = 0;
++	tx_cpu_owner_idx0 = 0;
++	tx_need_free_idx0 = 0;
++
++	/* initial UDMA register */
++	//OUTL(cpu_to_le32((u32) UDMA_Init_Setting), RTUSB_UDMA_CTRL);
++
++	if(sm){
++		printk("Storage mode enabled.\n");
++		reg_write(RTUSB_UDMA_CTRL, 0x3F000063);	/* enable storage mode */
++	}else
++	reg_write(RTUSB_UDMA_CTRL, 0x3F000003);
++
++
++	/* Tell the adapter where the TX/RX rings are located. */
++	//OUTL(phys_to_bus((u32) &rx_ring[0]), RTUSB_RX_BASE_PTR0);
++	reg_write(RTUSB_RX_BASE_PTR0, rx_ring_bus_addr);
++
++	//OUTL(phys_to_bus((u32) &tx_ring0[0]), RTUSB_TX_BASE_PTR0);
++	reg_write(RTUSB_TX_BASE_PTR0, tx_ring_bus_addr);
++
++	//OUTL(cpu_to_le32((u32) NUM_RX_DESC), RTUSB_RX_MAX_CNT0);
++	//OUTL(cpu_to_le32((u32) NUM_TX_DESC), RTUSB_TX_MAX_CNT0);
++	reg_write(RTUSB_RX_MAX_CNT0, cpu_to_le32(NUM_RX_DESC));
++	reg_write(RTUSB_TX_MAX_CNT0, cpu_to_le32(NUM_TX_DESC));
++
++	//OUTL(cpu_to_le32((u32) tx_cpu_owner_idx0), RTUSB_TX_CTX_IDX0);
++	//OUTL(cpu_to_le32((u32) (NUM_RX_DESC - 1)), RTUSB_RX_CALC_IDX0);
++	reg_write(RTUSB_TX_CTX_IDX0, cpu_to_le32(tx_cpu_owner_idx0));
++	reg_write(RTUSB_RX_CALC_IDX0, cpu_to_le32(NUM_RX_DESC - 1));
++
++	udelay(500);
++	return 0;
++}
++
++static int udc_dma_fini(void)
++{
++	int i;
++	u32 len;
++	dma_addr_t addr;
++
++	udc_dma_enable(false);
++	udc_dma_int_enable(false);
++
++	/* restore UDMA register */
++	reg_write(RTUSB_UDMA_CTRL, 0x0);
++
++	// unmap & free RX buffer
++	for(i=0; i<NUM_RX_DESC; i++){
++		addr = rx_ring0_noncache[i].rxd_info1.PDP0;
++		if(addr)
++			dma_unmap_single(NULL, addr, sizeof(u8) * RX_BUFF_SZ, DMA_FROM_DEVICE);
++		kfree((void *)USBRxPackets[i]);
++	}
++
++	// unmap Tx buffer only(but not free it)
++	for(i=0; i<NUM_TX_DESC; i++){
++		addr = tx_ring0_noncache[i].txd_info1.SDP0;
++		if(addr){
++			len  = tx_ring0_noncache[i].txd_info2.SDL0;
++			dma_unmap_single(NULL, addr, sizeof(u8) * len, DMA_TO_DEVICE);
++		}
++	}
++
++	dma_free_coherent(NULL, sizeof(struct PDMA_txdesc) * NUM_TX_DESC, tx_ring0_cache, tx_ring_bus_addr);
++	dma_free_coherent(NULL, sizeof(struct PDMA_rxdesc) * NUM_RX_DESC, rx_ring0_cache, rx_ring_bus_addr);
++
++	return 0;
++}
++
++static int rt_ep_enable(struct usb_ep *usb_ep, const struct usb_endpoint_descriptor *desc)
++{
++	struct rt_ep_struct *rt_ep = container_of(usb_ep, struct rt_ep_struct, ep);
++	struct rt_udc_struct *rt_usb = rt_ep->rt_usb;
++	unsigned long flags;
++
++	DBG;
++
++	if (!usb_ep || !desc || !EP_NO(rt_ep) || desc->bDescriptorType != USB_DT_ENDPOINT || rt_ep->bEndpointAddress != desc->bEndpointAddress) {
++		D_ERR(rt_usb->dev, "<%s> bad ep or descriptor\n", __func__);
++		return -EINVAL;
++	}
++	if (rt_ep->bmAttributes != desc->bmAttributes) {
++		D_ERR(rt_usb->dev, "<%s> %s type mismatch, 0x%x, 0x%x\n", __func__, usb_ep->name, rt_ep->bmAttributes, desc->bmAttributes);
++		return -EINVAL;
++	}
++	if (!rt_usb->driver || rt_usb->gadget.speed == USB_SPEED_UNKNOWN) {
++		D_ERR(rt_usb->dev, "<%s> bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++	local_irq_save(flags);
++	rt_ep->stopped = 0;
++	if(dma){
++		//rt_ep_irq_enable(rt_ep);
++	}else
++		rt_ep_irq_enable(rt_ep);
++	local_irq_restore(flags);
++
++	xprintk("<%s> ENABLED %s\n", __func__, usb_ep->name);
++	return 0;
++}
++
++static int rt_ep_disable(struct usb_ep *usb_ep)
++{
++	struct rt_ep_struct *rt_ep = container_of(usb_ep, struct rt_ep_struct, ep);
++	unsigned long flags;
++
++DBG;
++	if (!usb_ep || !EP_NO(rt_ep) /* || !list_empty(&rt_ep->queue) */) {
++		D_ERR(rt_ep->rt_usb->dev, "<%s> %s can not be disabled\n", __func__, usb_ep ? rt_ep->ep.name : NULL);
++		return -EINVAL;
++	}
++
++	local_irq_save(flags);
++	rt_ep->stopped = 1;
++	nuke(rt_ep, -ESHUTDOWN);
++	rt_flush(rt_ep);
++	rt_ep_irq_disable(rt_ep);
++
++	local_irq_restore(flags);
++
++	xprintk("<%s> DISABLED %s\n", __func__, usb_ep->name);
++	return 0;
++}
++
++static struct usb_request *rt_ep_alloc_request (struct usb_ep *usb_ep, gfp_t gfp_flags)
++{
++	struct rt_request *req;
++
++	DBG;
++	req = kzalloc(sizeof *req, gfp_flags);
++	if (!req || !usb_ep)
++		return 0;
++
++	INIT_LIST_HEAD(&req->queue);
++	req->in_use = 0;
++	return &req->req;
++}
++
++static void rt_ep_free_request(struct usb_ep *usb_ep, struct usb_request *usb_req)
++{
++	struct rt_request *req;
++
++	DBG;
++	req = container_of(usb_req, struct rt_request, req);
++	WARN_ON(!list_empty(&req->queue));
++	kfree(req);
++}
++
++/*
++ * Two cases :
++ * 1) UDC TX (IN EPs)
++ * enqueue req -> handle_ep() -> write fifo -> TX_DONE -> handle_ep() -> write next fifo -> TX_DONE...
++ *
++ * 2) UDC RX (OUT EPs)
++ * enqueue req -> RX_DONE -> handle_ep() -> read_fifo -> RX_DONE -> handle_ep() -> read fifo...
++ */
++static int rt_ep_queue(struct usb_ep *usb_ep, struct usb_request *req, gfp_t gfp_flags)
++{
++	struct rt_ep_struct		*rt_ep;
++	struct rt_udc_struct	*rt_usb;
++	struct rt_request		*rt_req;
++	unsigned long		flags;
++	int			ret = 0;
++	int			handle_right_now = 0;
++
++	rt_ep = container_of(usb_ep, struct rt_ep_struct, ep);
++	rt_usb = rt_ep->rt_usb;
++	rt_req = container_of(req, struct rt_request, req);
++	rt_req->rt_ep = rt_ep;
++
++	if (rt_usb->set_config && !EP_NO(rt_ep)) {
++		rt_usb->set_config = 0;
++		D_ERR(rt_usb->dev, "<%s> gadget reply set config\n", __func__);
++		return 0;
++	}
++
++	if (unlikely(!req || !rt_req || !req->complete || !req->buf)) {
++		D_ERR(rt_usb->dev, "<%s> bad params\n", __func__);
++		return -EINVAL;
++	}
++
++	if (unlikely(!usb_ep || !rt_ep)) {
++		D_ERR(rt_usb->dev, "<%s> bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	if (!rt_usb->driver || rt_usb->gadget.speed == USB_SPEED_UNKNOWN) {
++		D_ERR(rt_usb->dev, "<%s> bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	/* debug */
++	xprintk("<eq> ep%d%s %p %dB\n",  EP_NO(rt_ep), ((!EP_NO(rt_ep) && rt_ep->rt_usb->ep0state == EP0_IN_DATA_PHASE) || (EP_NO(rt_ep) && EP_DIR(rt_ep) == EP_IN  )) ? "IN" : "OUT", &rt_req->req,  req->length);
++
++	if (rt_ep->stopped) {
++		printk("EP%d -> stopped.\n",  EP_NO(rt_ep));
++		req->status = -ESHUTDOWN;
++		return -ESHUTDOWN;
++	}
++
++	if (rt_req->in_use) {
++		D_ERR(rt_usb->dev, "<%s> refusing to queue req %p (already queued)\n", __func__, req);
++		return -1;
++	}
++
++	local_irq_save(flags);
++	/*
++	 *	handle No-data Ctrl transfer.
++	 */
++	if(!EP_NO(rt_ep)/* EP0 */ && EP_DIR(rt_ep) == EP_OUT && !req->length){
++		done(rt_ep, rt_req, 0);
++		local_irq_restore(flags);
++		return ret;
++	}
++
++	req->status = -EINPROGRESS;
++	req->actual = 0;
++
++	if(dma || list_empty(&rt_ep->queue))
++		handle_right_now = 1;
++
++	ep_add_request(rt_ep, rt_req);
++
++	if(handle_right_now){
++		if(!EP_NO(rt_ep) && rt_ep->rt_usb->ep0state != EP0_OUT_DATA_PHASE){	/* ep0 && TX*/
++			handle_inep0(rt_ep);
++		}else if( EP_DIR(rt_ep) == EP_IN){			/* epin[1-x] */
++			handle_inep(rt_ep);
++		}else{
++			// other reqs are waiting for TX_DONE int.
++		}
++	}
++
++	if(dma){
++		if(EP_NO(rt_ep) && (EP_DIR(rt_ep) == EP_OUT))
++			tasklet_schedule(&rx_dma_tasklet);
++	}else{
++		if( (EP_DIR(rt_ep) == EP_OUT)/* OUT EP */ && rt_ep->pending){
++			rt_ep->pending = 0;
++			handle_pending_epoutirq(rt_usb, rt_ep, rt_req);
++		}
++	}
++
++	local_irq_restore(flags);
++	return ret;
++}
++
++static int rt_ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req)
++{
++	struct rt_ep_struct *rt_ep = container_of(usb_ep, struct rt_ep_struct, ep);
++	struct rt_request *req;
++	unsigned long flags;
++
++	DBG;
++	if (unlikely(!usb_ep || !EP_NO(rt_ep))) {
++		D_ERR(rt_ep->rt_usb->dev, "<%s> bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	local_irq_save(flags);
++
++	/* make sure it's actually queued on this endpoint */
++	list_for_each_entry(req, &rt_ep->queue, queue) {
++		if (&req->req == usb_req)
++			break;
++	}
++	if (&req->req != usb_req) {
++		local_irq_restore(flags);
++		return -EINVAL;
++	}
++
++	done(rt_ep, req, -ECONNRESET);
++
++	local_irq_restore(flags);
++	return 0;
++}
++
++static int rt_ep_set_halt(struct usb_ep *usb_ep, int value)
++{
++	struct rt_ep_struct *rt_ep = container_of(usb_ep, struct rt_ep_struct, ep);
++	unsigned long flags;
++
++	DBG;
++	if (unlikely(!usb_ep || !EP_NO(rt_ep))) {
++		D_ERR(rt_ep->rt_usb->dev, "<%s> bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	local_irq_save(flags);
++
++	if ((rt_ep->bEndpointAddress & USB_DIR_IN) && !list_empty(&rt_ep->queue)) {
++			local_irq_restore(flags);
++			return -EAGAIN;
++	}
++
++	rt_ep_stall(rt_ep, 1);
++
++	local_irq_restore(flags);
++
++	D_EPX(rt_ep->rt_usb->dev, "<%s> %s halt\n", __func__, usb_ep->name);
++	return 0;
++}
++
++static int rt_ep_fifo_status(struct usb_ep *usb_ep)
++{
++	struct rt_ep_struct *rt_ep = container_of(usb_ep, struct rt_ep_struct, ep);
++
++	DBG;
++	if (!usb_ep) {
++		D_ERR(rt_ep->rt_usb->dev, "<%s> bad ep\n", __func__);
++		return -ENODEV;
++	}
++
++	if (rt_ep->rt_usb->gadget.speed == USB_SPEED_UNKNOWN)
++		return 0;
++	else
++		return rt_fifo_bcount(rt_ep);
++}
++
++static void rt_ep_fifo_flush(struct usb_ep *usb_ep)
++{
++	struct rt_ep_struct *rt_ep = container_of(usb_ep, struct rt_ep_struct, ep);
++	unsigned long flags;
++
++	DBG;
++	local_irq_save(flags);
++
++	if (!usb_ep || !EP_NO(rt_ep) || !list_empty(&rt_ep->queue)) {
++		D_ERR(rt_ep->rt_usb->dev, "<%s> bad ep\n", __func__);
++		local_irq_restore(flags);
++		return;
++	}
++
++	/* toggle and halt bits stay unchanged */
++	rt_flush(rt_ep);
++
++	local_irq_restore(flags);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
++static void *rt_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes, dma_addr_t *dma, gfp_t gfp_flags)
++{
++	char	*retval;
++
++	retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM));
++	if (retval)
++//		*dma = virt_to_bus (retval);
++		*dma = (dma_addr_t)~0;
++	return retval;
++}
++
++static void rt_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, unsigned bytes)
++{
++	kfree (buf);
++}
++#endif
++
++static struct usb_ep_ops rt_ep_ops = {
++	.enable		= rt_ep_enable,
++	.disable	= rt_ep_disable,
++
++	.alloc_request	= rt_ep_alloc_request,
++	.free_request	= rt_ep_free_request,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
++	.alloc_buffer	= rt_ep_alloc_buffer,
++	.free_buffer	= rt_ep_free_buffer,
++#endif
++	.queue		= rt_ep_queue,
++	.dequeue	= rt_ep_dequeue,
++
++	.set_halt	= rt_ep_set_halt,
++	.fifo_status= rt_ep_fifo_status,
++	.fifo_flush	= rt_ep_fifo_flush,
++};
++
++/*******************************************************************************
++ * USB endpoint control functions
++ *******************************************************************************
++ */
++static void usb_init_data(struct rt_udc_struct *rt_usb)
++{
++	struct rt_ep_struct *rt_ep;
++	u8 i;
++
++	DBG;
++	/* device/ep0 records init */
++	INIT_LIST_HEAD(&rt_usb->gadget.ep_list);
++	INIT_LIST_HEAD(&rt_usb->gadget.ep0->ep_list);
++	ep0_chg_stat(__func__, rt_usb, EP0_IDLE);
++
++	/* basic endpoint records init */
++	for (i = 0; i < RT_USB_NB_EP; i++) {
++		rt_ep = &rt_usb->rt_ep[i];
++
++		if (i) {
++			list_add_tail(&rt_ep->ep.ep_list, &rt_usb->gadget.ep_list);
++			rt_ep->stopped = 1;
++		} else
++			rt_ep->stopped = 0;
++
++		INIT_LIST_HEAD(&rt_ep->queue);
++	}
++}
++
++static void udc_stop_activity(struct rt_udc_struct *rt_usb, struct usb_gadget_driver *driver)
++{
++	struct rt_ep_struct *rt_ep;
++	int i;
++
++	if (rt_usb->gadget.speed == USB_SPEED_UNKNOWN)
++		driver = NULL;
++
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < RT_USB_NB_EP; i++) {
++		rt_ep = &rt_usb->rt_ep[i];
++		if(i != 0){					/* don't have to flush EP[0]. */
++			rt_flush(rt_ep);
++			rt_ep->stopped = 1;
++			rt_ep_irq_disable(rt_ep);
++		}
++		nuke(rt_ep, -ESHUTDOWN);
++	}
++
++	rt_usb->cfg = 0;
++	rt_usb->intf = 0;
++	rt_usb->alt = 0;
++
++	if (driver)
++		driver->disconnect(&rt_usb->gadget);
++}
++
++/*
++ * keep for reference.
++ */
++static void handle_config(unsigned long data)
++{
++	DBG;
++#if 0
++	struct imx_udc_struct *imx_usb = (void *)data;
++	struct usb_ctrlrequest u;
++	int temp, cfg, intf, alt;
++
++	local_irq_disable();
++
++	temp = __raw_readl(imx_usb->base + USB_STAT);
++	cfg  = (temp & STAT_CFG) >> 5;
++	intf = (temp & STAT_INTF) >> 3;
++	alt  =  temp & STAT_ALTSET;
++
++	xprintk("<%s> orig config C=%d, I=%d, A=%d / req config C=%d, I=%d, A=%d\n", __func__, imx_usb->cfg, imx_usb->intf, imx_usb->alt, cfg, intf, alt);
++
++	if (cfg == 1 || cfg == 2) {
++
++		if (imx_usb->cfg != cfg) {
++			u.bRequest = USB_REQ_SET_CONFIGURATION;
++			u.bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
++			u.wValue = cfg;
++			u.wIndex = 0;
++			u.wLength = 0;
++			imx_usb->cfg = cfg;
++			imx_usb->driver->setup(&imx_usb->gadget, &u);
++
++		}
++		if (imx_usb->intf != intf || imx_usb->alt != alt) {
++			u.bRequest = USB_REQ_SET_INTERFACE;
++			u.bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE;
++			u.wValue = alt;
++			u.wIndex = intf;
++			u.wLength = 0;
++			imx_usb->intf = intf;
++			imx_usb->alt = alt;
++			imx_usb->driver->setup(&imx_usb->gadget, &u);
++		}
++	}
++
++	imx_usb->set_config = 0;
++
++	local_irq_enable();
++#endif
++}
++
++static void handle_setup(struct rt_udc_struct *rt_usb)
++{
++	u8 epcs;
++	int i;
++	union {
++		struct usb_ctrlrequest  r;
++		u8          raw[8];
++		u32         word[2];
++	} u;
++	struct rt_ep_struct *rt_ep = &rt_usb->rt_ep[0];
++
++	nuke(rt_ep, -EPROTO);
++
++	// read setup packet
++	for (i = 0; i < 8; i++)
++		u.raw[i] = usb_read(SETUPDATA + i);
++
++	le16_to_cpus(&u.r.wValue);
++	le16_to_cpus(&u.r.wIndex);
++	le16_to_cpus(&u.r.wLength);
++
++	xprintk("<SETUP> %02x.%02x v%04x\n", u.r.bRequestType, u.r.bRequest, u.r.wValue);
++
++	switch(u.r.bRequest){
++		/* HW(CUSB2) has handled it. */
++		case USB_REQ_SET_ADDRESS:
++			if (u.r.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
++				break;
++			return;
++	}
++
++	if(!u.r.wLength){
++		ep0_chg_stat(__func__, rt_usb, EP0_NO_DATA_PHASE);
++	}else if (u.r.bRequestType & USB_DIR_IN){
++		ep0_chg_stat(__func__, rt_usb, EP0_IN_DATA_PHASE);
++	}else{
++		// reload and clear out0bc
++		usb_write(OUT0BC, 0);
++		ep0_chg_stat(__func__, rt_usb, EP0_OUT_DATA_PHASE);
++	}
++
++	if(!rt_usb->driver){
++		printk("<%s> please insert gadget driver/module.\n", __func__);
++		goto stall;
++	}
++
++	if(!rt_usb->driver->setup)
++		goto stall;
++
++	i = rt_usb->driver->setup(&rt_usb->gadget, &u.r); // gadget would queue more usb req here
++
++	if (i < 0) {
++		printk("<%s> device setup error %d\n", __func__, i);
++		goto stall;
++	}
++
++	if(rt_usb->ep0state == EP0_NO_DATA_PHASE){
++		epcs = read_epcs(rt_ep);
++		epcs |= EP_CS_EP0_HSNAK;	// clear hsnak to let HW ack the status stage.
++		write_epcs(rt_ep, epcs);
++	}
++
++	return;
++stall:
++	printk("<%s> protocol STALL\n", __func__);
++	rt_ep_stall(rt_ep, 1);
++	ep0_chg_stat(__func__, rt_usb, EP0_STALL);
++	return;
++}
++
++/*
++ *  handle TX done interrupt
++ */
++static void handle_epinirq(struct rt_udc_struct *rt_usb, u8 epinirq)
++{
++	u8 irq = 0x0;
++    struct rt_request *req;
++	struct rt_ep_struct *rt_ep;
++
++	rt_ep = &rt_usb->rt_ep[epinirq];
++
++	if (list_empty(&rt_ep->queue))
++		FATAL_ERROR("empty queue");
++
++	// clear ep interrupt
++	if(epinirq < 8){
++		irq |= 1 << epinirq; 
++		usb_write(IN07IRQ, irq);
++	}else{
++		irq |= 1 << (epinirq-8);
++		usb_write(IN815IRQ, irq);
++	}
++
++	req = list_entry(rt_ep->queue.next, struct rt_request, queue);
++	xprintk("r.l=%d, r.a=%d\n", req->req.length, req->req.actual);
++	if(req->req.actual >= req->req.length ){
++		if( req->req.actual && (!(req->req.actual % rt_ep->ep.maxpacket))  && req->req.zero){
++			// deal with one more "zlp"
++			req->req.zero = 0;
++			write_ep_fifo_zlp(rt_ep);
++                        return;
++		}
++
++		// the first tx req in ep->queue is done.
++		rt_ep->tx_done_count = 0;
++		if(!epinirq /* EP0 */)
++			ep0_chg_stat(__func__, rt_usb, EP0_IDLE);
++		done(rt_ep, req, 0);
++#if 1
++		// more reqs there.
++		if (!list_empty(&rt_ep->queue) && !rt_ep->tx_done_count){
++			if(!epinirq /* EP0 */){
++				handle_inep0(rt_ep);
++			}else{
++				handle_inep(rt_ep);
++			}
++		}
++#endif
++	}else{
++		if(!epinirq /* EP0 */){
++			handle_inep0(rt_ep);
++		}else
++			handle_inep(rt_ep);
++	}
++}
++
++static void handle_ep0outirq(struct rt_udc_struct *rt_usb, u8 epoutirq)
++{
++	u8 epcs, irq = 0x0;
++    struct rt_request *req = NULL;
++	struct rt_ep_struct *rt_ep = NULL;
++
++DBG;
++	rt_ep = &rt_usb->rt_ep[0];
++
++	if(rt_usb->ep0state == EP0_STALL){
++		printk("<%s> protocol STALL\n", __func__);
++		rt_ep_stall(rt_ep, 1);
++		return;
++	}
++
++	if(rt_usb->ep0state != EP0_OUT_DATA_PHASE)
++		FATAL_ERROR("Odd stage");
++
++	do{
++		if(unlikely(!read_outbc(0x0)))
++			FATAL_ERROR("EP0 BC");
++
++		if (unlikely(list_empty(&rt_ep->queue)))
++			FATAL_ERROR("EP0 no req");
++
++		req = handle_outep0(rt_ep);
++
++		//req = list_entry(rt_ep->queue.next, struct rt_request, queue);
++		xprintk("q.l=%d,q.a=%d\n", req->req.length, req->req.actual);
++
++		// clear ep interrupt
++		irq |= 1; 
++		usb_write(OUT07IRQ, irq);
++
++		if(req && ((req->req.actual % rt_ep->ep.maxpacket) || (req->req.actual >= req->req.length))){
++			ep0_chg_stat(__func__, rt_usb, EP0_IDLE);
++			done(rt_ep, req, 0);	// short packet indicates transaction is done.
++
++			epcs = read_epcs(rt_ep);
++			epcs |= EP_CS_EP0_HSNAK;	// clear hsnak bit to let HW ack the status stage.
++			write_epcs(rt_ep, epcs);
++			break;
++		}
++
++		// reload EP[0]
++		usb_write(OUT0BC /*out0bc*/, 0x0);
++		epcs = read_epcs(rt_ep);
++	}while(!(epcs & EP0_OUT_BSY));
++}
++
++static void handle_pending_epoutirq(struct rt_udc_struct *rt_usb, struct rt_ep_struct *rt_ep, struct rt_request *req)
++{
++	u8 epcs;
++
++DBG;
++	do{
++		if(unlikely(!read_outbc(EP_NO(rt_ep))))
++			FATAL_ERROR("No BC");
++
++		handle_outep(rt_ep);
++		if(req && ( (req->req.actual % rt_ep->ep.maxpacket) || (req->req.actual >= req->req.length))){
++			xprintk("q.l=%d,q.a=%d\n", req->req.length, req->req.actual);
++
++			//rx_done(rt_ep, req, 0);
++			done(rt_ep, req, 0);
++		}
++
++		epcs = read_epcs(rt_ep);
++		write_epcs(rt_ep, 0x0);
++		epcs = read_epcs(rt_ep);
++
++	}while(!(epcs & EP_CS_BSY));
++}
++
++static void handle_epoutirq(struct rt_udc_struct *rt_usb, u8 epoutirq)
++{
++	u8 irq = 0x0;
++
++DBG;
++	if(unlikely(epoutirq == 0x0)){
++		handle_ep0outirq(rt_usb, 0x0);
++		return;
++	}
++
++	tasklet_schedule(&rx_tasklet);
++
++	// clear ep interrupt
++	irq |= 1 << epoutirq; 
++	usb_write(OUT07IRQ, irq);
++	return;
++}
++
++static void eps_change_to_hs(struct rt_udc_struct *rt_usb)
++{
++	int i;
++	struct rt_ep_struct *rt_ep;
++	for(i = 0; i < RT_USB_NB_EP; i++){
++		rt_ep = &rt_usb->rt_ep[i];
++		if(rt_ep->bmAttributes == USB_ENDPOINT_XFER_BULK){
++			rt_ep->ep.maxpacket = 512;
++		}
++	}
++}
++
++static void eps_change_to_fs(struct rt_udc_struct *rt_usb)
++{
++	int i;
++	struct rt_ep_struct *rt_ep;
++	for(i = 0; i < RT_USB_NB_EP; i++){
++		rt_ep = &rt_usb->rt_ep[i];
++		if(rt_ep->bmAttributes == USB_ENDPOINT_XFER_BULK){
++			rt_ep->ep.maxpacket = 64;
++		}
++	}
++}
++
++void handle_highspeed(struct rt_udc_struct *rt_usb)
++{
++	DBG;
++
++	eps_change_to_hs(rt_usb);
++
++	if(dma){
++#if defined (CONFIG_RALINK_RT3883) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_MT7620)
++		usb_write(IN1CON, 0x8D);	// InEP1 : Int, 2 subfifos
++		usb_write(IN2CON, 0x89);	// InEP2 : Bulk, 2 subfifo
++		usb_write(OUT1CON, 0x8D);	// OutEP1 : Int, 2 subfifos
++		usb_write(OUT2CON, 0x89);	// OutEP2 : Bulk, 2 subfifos
++		//usb_write(OUT3CON, 0x89);	// OutEP3 : Bulk, 2 subfifo
++		//usb_write(OUT4CON, 0x89);	// OutEP4 : Bulk. 2 subfifo
++#elif defined (CONFIG_RALINK_RT5350)
++		// Access by CPU
++		usb_write(IN1CON, 0x89);	// InEP1 : Bulk, 2 subfifos
++		usb_write(OUT1CON, 0x89);	// OutEP1 : Bulk, 2 subfifos
++#else
++#error	"define a platform"
++#endif
++	}else{
++		// Access by CPU
++#if defined (CONFIG_RALINK_RT3883) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_MT7620)
++		usb_write(IN1CON, 0x8C);	// InEP1 : Int  , 1 subfifos
++		usb_write(IN2CON, 0x88);	// InEP2 : Bulk, 1 subfifo
++
++		usb_write(OUT1CON, 0x8C);	// OutEP1 : Int, 1 subfifos
++		usb_write(OUT2CON, 0x88);	// OutEP2 : Bulk, 1 subfifos
++		//usb_write(OUT3CON, 0x88);	// OutEP3 : Bulk, 1 subfifo
++		//usb_write(OUT4CON, 0x88);	// OutEP4 : Bulk. 1 subfifo
++#elif defined (CONFIG_RALINK_RT5350)
++		// Access by CPU
++		usb_write(IN1CON, 0x88);	// InEP1 : Bulk  , 1 subfifos
++		usb_write(OUT1CON, 0x88);	// OutEP1 : Bulk, 1 subfifos
++#else
++#error	"define a platform"
++#endif
++
++	}
++	// clear all pending interrupts
++	usb_write(IN07IRQ, 0xFF);
++	usb_write(OUT07IRQ, 0xFF);
++
++	rt_usb->gadget.speed = USB_SPEED_HIGH;	
++
++	// reset ALL endpoints
++	rt_all_eps_reset();
++
++	// Enable ep0 interrupt.
++	// (EPx interrupt is enabled in EPx_enable(). )
++	rt_ep_irq_enable(&rt_usb->rt_ep[0]);
++}
++
++static void handle_reset(struct rt_udc_struct *rt_usb)
++{
++	struct rt_ep_struct *rt_ep;
++        int i;
++
++	eps_change_to_fs(rt_usb);
++
++	// remove all EPs' usb request
++	for (i = 0; i < RT_USB_NB_EP; i++) {
++		rt_ep = &rt_usb->rt_ep[i];
++		if(i != 0){                                     /* don't have to flush EP[0]. */
++			rt_flush(rt_ep);
++			rt_ep->stopped = 1;
++			rt_ep_irq_disable(rt_ep);
++		}
++		nuke(rt_ep, -ESHUTDOWN);
++	}
++
++        rt_usb->cfg = 0;
++        rt_usb->intf = 0;
++        rt_usb->alt = 0;
++
++        if(dma){
++		// clear all PDMA interrupts
++		udc_dma_all_int_clear();
++		// reset PDMA
++		udc_dma_rst();
++	}
++
++	// clear all pending interrupts
++	usb_write(IN07IRQ, 0xFF);
++	usb_write(OUT07IRQ, 0xFF);
++
++	// flush all EP's fifo
++	rt_all_eps_reset();                        
++}
++
++static void handle_usbirq(struct rt_udc_struct *rt_usb, u8 usbirq)
++{
++	if(usbirq & USB_INTR_SETUP_TOKEN_VALID){
++		// Setup token is arrival.
++		// get setup data and pass it to gadget driver.
++		handle_setup(rt_usb);
++	}
++
++	if(usbirq & USB_INTR_RESET)
++		handle_reset(rt_usb);
++
++	if(usbirq & USB_INTR_HSPEED)
++		handle_highspeed(rt_usb);
++
++	/*
++	 * DO NOT try to clear SoF and token Interrupt!
++	 */
++	if( (usbirq & USB_INTR_SETUP_TOKEN_VALID) ||
++		(usbirq & USB_INTR_HSPEED) ||
++		(usbirq & USB_INTR_RESET))
++		usb_write(USBIRQ, usbirq);
++}
++
++static int irq_count = 100;	/* for debug */
++/*
++ * Interrupt handler
++ */
++irqreturn_t rt_irq_handler(int irq, void *_dev)
++{
++	u32 usbirq,epin07irq,epin07ien,epout07irq,epout07ien;
++	struct rt_udc_struct *rt_usb = _dev;
++#ifdef DEBUG
++	u32 count_tmp = irq_count;	
++#endif
++
++        
++	DBG;
++	irq_count++;
++
++	usbirq = usb_read(USBIRQ);
++	epin07irq = usb_read(IN07IRQ);
++	epin07ien = usb_read(IN07IEN);
++	epout07irq = usb_read(OUT07IRQ);
++	epout07ien = usb_read(OUT07IEN);
++
++	//epin07irq = epin07irq & epin07ien;
++	//epout07irq = epout07irq & epout07ien;
++	
++	xprintk(">%x\n", count_tmp);
++	dump_usbirq(usbirq);
++	dump_epirq(epin07irq, epin07ien, 1);
++	dump_epirq(epout07irq, epout07ien, 0);
++
++	if(dma){
++		u32 dma_irq = reg_read(RTUSB_INT_STATUS);
++		if(epin07irq & 0x1)				// INEP0
++			handle_epinirq(rt_usb, 0);
++
++		if(usbirq)						// HS, Reset, SetupValid
++			handle_usbirq(rt_usb, usbirq);
++
++		if(epout07irq & 0x1)			// OUTEP0
++			handle_epoutirq(rt_usb, 0);
++
++		if(dma_irq)
++			handle_dmairq(rt_usb, dma_irq);
++
++	}else{
++		if(epin07irq & 0x1)				// INEP0
++			handle_epinirq(rt_usb, 0);
++
++		if(usbirq)						// HS, Reset, SetupValid
++			handle_usbirq(rt_usb, usbirq);
++
++		if(epout07irq & 0x1)			// OUTEP0
++			handle_epoutirq(rt_usb, 0);
++
++		if(epout07irq & 0x2)			// OUTEP1
++			handle_epoutirq(rt_usb, 1);
++
++		if(epin07irq & 0x2)				// INEP1
++			handle_epinirq(rt_usb, 1);
++
++		if(epout07irq & 0x4)			// OUTEP2
++			handle_epoutirq(rt_usb, 2);
++
++		if(epin07irq & 0x4)				// INEP2
++			handle_epinirq(rt_usb, 2);
++
++		//if(epout07irq & 0x8)			// OUTEP3
++		//	handle_epoutirq(rt_usb, 3);
++
++		//if(epout07irq & 0x10)			// OUTEP4
++		//	handle_epoutirq(rt_usb, 4);
++	}
++	xprintk("<%x\n", count_tmp);
++	return IRQ_HANDLED;
++}
++
++/*
++ ******************************************************************************
++ * Static defined Ralink UDC structure
++ *******************************************************************************
++ */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)
++static void nop_release(struct device *dev)
++{
++    return;
++}
++#endif
++
++static const struct usb_gadget_ops rt_udc_ops = {
++	.get_frame	 = rt_udc_get_frame,
++	.wakeup		 = rt_udc_wakeup,
++};
++
++static struct rt_udc_struct controller = {
++	.gadget = {
++		.ops		= &rt_udc_ops,
++		.ep0		= &controller.rt_ep[0].ep,
++		.name		= driver_name,
++		.dev = {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)
++                        .init_name = "gadget",
++                        .release = nop_release,
++#else
++			.bus_id = "gadget",
++#endif
++		},
++	},
++	.rt_ep[0] = {
++		.ep = {
++			.name		= ep0name,
++			.ops		= &rt_ep_ops,
++			.maxpacket	= 64,
++		},
++		.rt_usb		= &controller,
++		.bEndpointAddress	= 0,
++		.bmAttributes		= USB_ENDPOINT_XFER_CONTROL,
++		.pending		= 0,
++	 },
++#if defined (CONFIG_RALINK_RT3883) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_MT7620)
++	.rt_ep[1] = {
++		.ep = {
++			.name		= "ep1in-int",
++			.ops		= &rt_ep_ops,
++			.maxpacket	= 64,
++		},
++		.rt_usb			= &controller,
++		.bEndpointAddress	= USB_DIR_IN | 1,
++		.bmAttributes		= USB_ENDPOINT_XFER_INT,
++		.pending        = 0,
++	 },
++	.rt_ep[2] = {
++		.ep = {
++			.name		= "ep2in-bulk",
++			.ops		= &rt_ep_ops,
++			.maxpacket	= 64,
++		},
++		.rt_usb			= &controller,
++		.bEndpointAddress	= USB_DIR_IN | 2,
++		.bmAttributes		= USB_ENDPOINT_XFER_BULK,
++		.pending        = 0,
++	},
++	.rt_ep[3] = {
++		.ep = {
++			.name		= "ep1out-int",
++			.ops		= &rt_ep_ops,
++			.maxpacket	= 64,
++		},
++		.rt_usb			= &controller,
++		.bEndpointAddress 	= USB_DIR_OUT | 1,
++		.bmAttributes		= USB_ENDPOINT_XFER_INT,
++		.pending        = 0,
++	 },
++	.rt_ep[4] = {
++		.ep = {
++			.name		= "ep2out-bulk",
++			.ops		= &rt_ep_ops,
++			.maxpacket	= 64,
++		 },
++		.rt_usb			= &controller,
++		.bEndpointAddress 	= USB_DIR_OUT | 2,
++		.bmAttributes		= USB_ENDPOINT_XFER_BULK,
++		.pending        = 0,
++	 },
++	 /*
++	.rt_ep[5] = {
++		.ep = {
++			.name		= "ep3out-bulk",
++			.ops		= &rt_ep_ops,
++			.maxpacket	= 64,
++		},
++		.rt_usb			= &controller,
++		.bEndpointAddress 	= USB_DIR_OUT | 3,
++		.bmAttributes		= USB_ENDPOINT_XFER_BULK,
++		.pending        = 0,
++	 },
++	.rt_ep[6] = {
++		.ep = {
++			.name		= "ep4out-bulk",
++			.ops		= &rt_ep_ops,
++			.maxpacket	= 64,
++		},
++		.rt_usb			= &controller,
++		.bEndpointAddress 	= USB_DIR_OUT | 4,
++		.bmAttributes		= USB_ENDPOINT_XFER_BULK,
++		.pending        = 0,
++	 },
++	 */
++
++#elif defined (CONFIG_RALINK_RT5350)
++	.rt_ep[1] = {
++		.ep = {
++			.name		= "ep1in-bulk",
++			.ops		= &rt_ep_ops,
++			.maxpacket	= 64,
++		},
++		.rt_usb			= &controller,
++		.bEndpointAddress	= USB_DIR_IN | 1,
++		.bmAttributes		= USB_ENDPOINT_XFER_BULK,
++		.pending        = 0,
++	 },
++	.rt_ep[2] = {
++		.ep = {
++			.name		= "ep1out-bulk",
++			.ops		= &rt_ep_ops,
++			.maxpacket	= 64,
++		},
++		.rt_usb			= &controller,
++		.bEndpointAddress 	= USB_DIR_OUT | 1,
++		.bmAttributes		= USB_ENDPOINT_XFER_BULK,
++		.pending        = 0,
++	 },
++#else
++#error	"define a platform"
++#endif
++};
++
++/*
++ *******************************************************************************
++ * USB gadged driver functions
++ *******************************************************************************
++ */
++
++static void rt_udc_enable(struct rt_udc_struct *rt_usb)
++{
++	DBG;
++	rt_usb->gadget.speed = USB_SPEED_FULL;
++	if(dma){
++		// enable dma interrupts
++		udc_dma_all_int_clear();
++		udc_dma_int_enable(true);
++
++		udc_dma_rst();
++
++		// enable dma
++		udc_dma_enable(true);
++	}
++}
++
++static void rt_udc_disable(struct rt_udc_struct *rt_usb)
++{
++	DBG;
++	ep0_chg_stat(__func__, rt_usb, EP0_IDLE);
++	rt_usb->gadget.speed = USB_SPEED_UNKNOWN;
++	if(dma){
++		// disable dma interrupts
++		udc_dma_all_int_clear();
++		udc_dma_int_enable(false);
++
++		udc_dma_rst();
++
++		// disable dma
++		udc_dma_enable(false);
++	}
++}
++
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++{
++	struct rt_udc_struct *rt_usb = &controller;
++	int retval;
++
++	DBG;
++	if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind || !driver->disconnect || !driver->setup)
++			return -EINVAL;
++	if (!rt_usb)
++		return -ENODEV;
++	if (rt_usb->driver)
++		return -EBUSY;
++
++	/* first hook up the driver ... */
++	rt_usb->driver = driver;
++	rt_usb->gadget.dev.driver = &driver->driver;
++	retval = device_add(&rt_usb->gadget.dev);
++	if (retval)
++		goto fail;
++
++	retval = driver->bind(&rt_usb->gadget);
++	if (retval) {
++		D_ERR(rt_usb->dev, "<%s> bind to driver --> error %d\n", __func__, retval);
++		device_del(&rt_usb->gadget.dev);
++		goto fail;
++	}
++
++	D_INI(rt_usb->dev, "<%s> registered gadget driver '%s'\n", __func__, driver->driver.name);
++	rt_udc_enable(rt_usb);
++	return 0;
++
++fail:
++	rt_usb->driver = NULL;
++	rt_usb->gadget.dev.driver = NULL;
++	return retval;
++}
++EXPORT_SYMBOL(usb_gadget_register_driver);
++
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++	struct rt_udc_struct *rt_usb = &controller;
++
++DBG;
++	if (!rt_usb)
++		return -ENODEV;
++	if (!driver || driver != rt_usb->driver || !driver->unbind)
++		return -EINVAL;
++
++	udc_stop_activity(rt_usb, driver);
++	rt_udc_disable(rt_usb);
++	del_timer(&rt_usb->timer);
++
++	driver->unbind(&rt_usb->gadget);
++	rt_usb->gadget.dev.driver = NULL;
++	rt_usb->driver = NULL;
++
++	device_del(&rt_usb->gadget.dev);
++
++	D_INI(rt_usb->dev, "<%s> unregistered gadget driver '%s'\n", __func__, driver->driver.name);
++
++	return 0;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++/*******************************************************************************
++ * Module functions
++ *******************************************************************************
++ */
++static int __init rt_udc_probe(struct platform_device *pdev)
++{
++	struct rt_udc_struct *rt_usb = &controller;
++	struct resource *res_mem, *res_irq;
++	void __iomem *base;
++	int ret = 0, res_mem_size;
++
++DBG;
++	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res_mem) {
++		dev_err(&pdev->dev, "can't get device resources\n");
++		return -ENODEV;
++	}
++
++	res_mem_size = res_mem->end - res_mem->start + 1;
++	if (!request_mem_region(res_mem->start, res_mem_size, res_mem->name)) {
++		dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n", res_mem_size, res_mem->start);
++		return -ENOMEM;
++	}
++
++	base = ioremap(res_mem->start, res_mem_size);
++	if (!base) {
++		dev_err(&pdev->dev, "ioremap failed\n");
++		ret = -EIO;
++		goto fail1;
++	}
++
++	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (!res_irq) {
++			dev_err(&pdev->dev, "can't get irq number\n");
++			ret = -ENODEV;
++			goto fail3;
++	}
++	rt_usb->interrupt = res_irq->start;
++
++	ret = request_irq(rt_usb->interrupt, rt_irq_handler, IRQF_DISABLED, driver_name, rt_usb);
++	if (ret) {
++		dev_err(&pdev->dev, "can't get irq %i, err %d\n", rt_usb->interrupt, ret);
++		goto fail3;
++	}
++
++	rt_usb->res = res_mem;
++	rt_usb->base = base;
++	rt_usb->dev = &pdev->dev;
++
++	device_initialize(&rt_usb->gadget.dev);
++
++	rt_usb->gadget.dev.parent = &pdev->dev;
++	rt_usb->gadget.dev.dma_mask = pdev->dev.dma_mask;
++
++	platform_set_drvdata(pdev, rt_usb);
++
++	usb_init_data(rt_usb);
++
++	if(dma){
++		if(rt_udc_dma_init())
++			goto fail4;
++	}
++
++	rt_udc_init(rt_usb);
++
++	init_timer(&rt_usb->timer);
++	rt_usb->timer.function = handle_config;
++	rt_usb->timer.data = (unsigned long)rt_usb;
++
++	return 0;
++fail4:
++	free_irq(rt_usb->interrupt, rt_usb);
++fail3:
++	iounmap(base);
++fail1:
++	release_mem_region(res_mem->start, res_mem_size);
++	return ret;
++}
++
++static int __exit rt_udc_remove(struct platform_device *pdev)
++{
++	struct rt_udc_struct *rt_usb = platform_get_drvdata(pdev);
++
++	DBG;
++	rt_udc_disable(rt_usb);
++	del_timer(&rt_usb->timer);
++
++	free_irq(rt_usb->interrupt, rt_usb);
++
++	iounmap(rt_usb->base);
++	release_mem_region(rt_usb->res->start,	rt_usb->res->end - rt_usb->res->start + 1);
++
++	//if (pdata->exit)
++	//	pdata->exit(&pdev->dev);
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static void set_device_mode(void)
++{
++	u32 val;
++	val = le32_to_cpu(*(volatile u_long *)(SYSCFG1));
++	val = val & ~(USB0_HOST_MODE);
++	*(volatile u_long *)(SYSCFG1) = cpu_to_le32(val);
++	udelay(10000);
++}
++
++/*----------------------------------------------------------------------------*/
++static struct platform_driver udc_driver = {
++
++	.driver		= {
++		.name	= driver_name,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= rt_udc_probe,
++	.remove		= __exit_p(rt_udc_remove),
++	.suspend	= NULL,
++	.resume		= NULL,
++};
++
++static int udc_create_proc(void)
++{
++    pProcDir = proc_mkdir(PROC_DIR, NULL);
++    if ((pProcDebugLevel = create_proc_entry(DEBUGLEVEL_PROCFILE, 0, pProcDir))){
++        pProcDebugLevel->read_proc = (read_proc_t*)&debuglevel_read;
++        pProcDebugLevel->write_proc = (write_proc_t*)&debuglevel_write;
++    }
++    return 0;
++}
++
++static int udc_remove_proc(void)
++{
++    if (pProcDebugLevel)
++        remove_proc_entry(DEBUGLEVEL_PROCFILE, pProcDir);
++    if (pProcDir)
++        remove_proc_entry(PROC_DIR, 0);
++
++    return 0;
++}
++
++static int __init udc_init(void)
++{
++	int ret;
++	udc_create_proc();
++
++	try_wake_up();
++	set_device_mode();
++
++	ret = platform_driver_register(&udc_driver);
++
++	tasklet_init(&rx_tasklet, rx_do_tasklet, 0);
++	tasklet_init(&tx_tasklet, tx_do_tasklet, 0);
++
++	if(dma){
++		printk("DMA TXMAXCAP=%d\n", TXMAXCAP);
++		tasklet_init(&rx_dma_tasklet, rx_dma_done_do_tasklet, 0);
++		tasklet_init(&tx_dma_tasklet, tx_dma_done_do_tasklet, 0);
++	}
++
++	return ret; //platform_driver_probe(&udc_driver, rt_udc_probe);
++}
++module_init(udc_init);
++
++static void __exit udc_exit(void)
++{
++	DBG;
++	udc_remove_proc();
++	if(dma)
++		udc_dma_fini();
++	platform_driver_unregister(&udc_driver);
++}
++module_exit(udc_exit);
++
++MODULE_DESCRIPTION("Ralink USB Device Controller driver");
++MODULE_AUTHOR("Ying Yuan Huang <yy_huang@ralinktech.com>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:rt_udc");
++
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0163-USB-MIPS-ralink-fix-usb-issue-on-mt7620.patch b/target/linux/ramips/patches-3.9/0163-USB-MIPS-ralink-fix-usb-issue-on-mt7620.patch
new file mode 100644
index 0000000000..f7f6d32a68
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0163-USB-MIPS-ralink-fix-usb-issue-on-mt7620.patch
@@ -0,0 +1,48 @@
+From 7bb04eed36ee0b2f3148fc33db7f75d9b4c8548c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 24 May 2013 21:28:08 +0200
+Subject: [PATCH 163/164] USB: MIPS: ralink: fix usb issue on mt7620
+
+USB fails when frequency scaling is enabled. Increase the idle cpu speed when
+scaled.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/mt7620.h |    1 +
+ arch/mips/ralink/mt7620.c                  |    8 ++++++++
+ 2 files changed, 9 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index 9809972..d469c69 100644
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -20,6 +20,7 @@
+ #define SYSC_REG_CHIP_REV		0x0c
+ #define SYSC_REG_SYSTEM_CONFIG0		0x10
+ #define SYSC_REG_SYSTEM_CONFIG1		0x14
++#define SYSC_REG_CPU_SYS_CLKCFG		0x3c
+ #define SYSC_REG_CPLL_CONFIG0		0x54
+ #define SYSC_REG_CPLL_CONFIG1		0x58
+ 
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 4956d96..d76eb85 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -186,6 +186,14 @@ void __init ralink_clk_init(void)
+ 	ralink_clk_add("10000500.uart", 40000000);
+ 	ralink_clk_add("10000b00.spi", 40000000);
+ 	ralink_clk_add("10000c00.uartlite", 40000000);
++
++#ifdef CONFIG_USB
++	/*
++	 * When the CPU goes into sleep mode, the BUS clock will be too low for
++	 * USB to function properly
++	 */
++	rt_sysc_m32(0x1f1f, 0x303, SYSC_REG_CPU_SYS_CLKCFG);
++#endif
+ }
+ 
+ void __init ralink_of_remap(void)
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0164-Kbuild-add-missing-space.patch b/target/linux/ramips/patches-3.9/0164-Kbuild-add-missing-space.patch
new file mode 100644
index 0000000000..5242d2081b
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0164-Kbuild-add-missing-space.patch
@@ -0,0 +1,38 @@
+From 3630032605c18986555263eccc08b929e4c6d473 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 17 May 2013 01:03:45 +0200
+Subject: [PATCH 164/164] Kbuild: add missing space
+
+Currently the output looks like this:
+DTC     arch/mips/ralink/dts/mt7620a_eval.dtb
+DTB    arch/mips/ralink/dts/mt7620a_eval.dtb.S
+AS      arch/mips/ralink/dts/mt7620a_eval.dtb.o
+
+Whitespace error was introduced by initial commit
+commit aab94339cd85d726abeae78fc02351fc1910e6a4
+Author: Dirk Brandewie <dirk.brandewie@gmail.com>
+Date:   Wed Dec 22 11:57:26 2010 -0800
+
+of: Add support for linking device tree blobs into vmlinux
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ scripts/Makefile.lib |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
+index 07125e6..e13fff1 100644
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -251,7 +251,7 @@ cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
+ # ---------------------------------------------------------------------------
+ 
+ # Generate an assembly file to wrap the output of the device tree compiler
+-quiet_cmd_dt_S_dtb= DTB    $@
++quiet_cmd_dt_S_dtb= DTB     $@
+ cmd_dt_S_dtb=						\
+ (							\
+ 	echo '\#include <asm-generic/vmlinux.lds.h>'; 	\
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0200-owrt-GPIO-add-gpio_export_with_name.patch b/target/linux/ramips/patches-3.9/0200-owrt-GPIO-add-gpio_export_with_name.patch
new file mode 100644
index 0000000000..74ef79b7d6
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0200-owrt-GPIO-add-gpio_export_with_name.patch
@@ -0,0 +1,338 @@
+From 7d8a8b0e46a970fba505d967e93123e9729d97b5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 23 Jun 2013 00:16:22 +0200
+Subject: [PATCH] owrt: GPIO: add gpio_export_with_name
+
+http://lists.infradead.org/pipermail/linux-arm-kernel/2012-November/133856.html
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ Documentation/devicetree/bindings/gpio/gpio.txt |   60 ++++++++++++++++++++
+ drivers/gpio/gpiolib-of.c                       |   68 +++++++++++++++++++++++
+ drivers/gpio/gpiolib.c                          |   24 +++++---
+ include/asm-generic/gpio.h                      |    6 +-
+ include/linux/gpio.h                            |   26 ++++++++-
+ 5 files changed, 172 insertions(+), 12 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
+index a336287..c2a9024 100644
+--- a/Documentation/devicetree/bindings/gpio/gpio.txt
++++ b/Documentation/devicetree/bindings/gpio/gpio.txt
+@@ -112,3 +112,63 @@ where,
+ 
+ The pinctrl node must have "#gpio-range-cells" property to show number of
+ arguments to pass with phandle from gpio controllers node.
++
++3) gpio-export
++--------------
++
++gpio-export will allow you to automatically export gpio
++
++required properties:
++- compatible: Should be "gpio-export"
++
++in each child node will reprensent a gpio or if no name is specified
++a list of gpio to export
++
++required properties:
++- gpios: gpio to export
++
++optional properties:
++ - gpio-export,name: export name
++ - gpio-export,output: to set the as output with default value
++ 		       if no present gpio as input
++ - pio-export,direction_may_change: boolean to allow the direction to be controllable
++
++Example:
++
++
++gpio_export {
++	compatible = "gpio-export";
++	#size-cells = <0>;
++
++	in {
++		gpio-export,name = "in";
++		gpios = <&pioC 20 0>;
++	};
++
++	out {
++		gpio-export,name = "out";
++		gpio-export,output = <1>;
++		gpio-export,direction_may_change;
++		gpios = <&pioC 21 0>;
++	};
++
++	in_out {
++		gpio-export,name = "in_out";
++		gpio-export,direction_may_change;
++		gpios = <&pioC 21 0>;
++	};
++
++	gpios_in {
++		gpios = <&pioB 0 0
++			 &pioB 3 0
++			 &pioC 4 0>;
++		gpio-export,direction_may_change;
++	};
++
++	gpios_out {
++		gpios = <&pioB 1 0
++			 &pioB 2 0
++			 &pioC 3 0>;
++		gpio-export,output = <1>;
++	};
++};
+diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
+index 5150df6..195491b 100644
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -21,6 +21,8 @@
+ #include <linux/of_gpio.h>
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+ 
+ /* Private data structure for of_gpiochip_find_and_xlate */
+ struct gg_data {
+@@ -253,3 +255,69 @@ void of_gpiochip_remove(struct gpio_chip *chip)
+ 	if (chip->of_node)
+ 		of_node_put(chip->of_node);
+ }
++
++static struct of_device_id gpio_export_ids[] = {
++	{ .compatible = "gpio-export" },
++	{ /* sentinel */ }
++};
++
++static int __init of_gpio_export_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	struct device_node *cnp;
++	u32 val;
++	int nb = 0;
++
++	for_each_child_of_node(np, cnp) {
++		const char *name = NULL;
++		int gpio;
++		bool dmc;
++		int max_gpio = 1;
++		int i;
++
++		of_property_read_string(cnp, "gpio-export,name", &name);
++
++		if (!name)
++			max_gpio = of_gpio_count(cnp);
++
++		for (i = 0; i < max_gpio; i++) {
++			unsigned flags = 0;
++			enum of_gpio_flags of_flags;
++
++			gpio = of_get_gpio_flags(cnp, i, &of_flags);
++
++			if (of_flags == OF_GPIO_ACTIVE_LOW)
++				flags |= GPIOF_ACTIVE_LOW;
++
++			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++			else
++				flags |= GPIOF_IN;
++
++			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++				continue;
++
++			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++			gpio_export_with_name(gpio, dmc, name);
++			nb++;
++		}
++	}
++
++	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++	return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++	.driver		= {
++		.name		= "gpio-export",
++		.owner	= THIS_MODULE,
++		.of_match_table	= of_match_ptr(gpio_export_ids),
++	},
++};
++
++static int __init of_gpio_export_init(void)
++{
++	return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
++}
++device_initcall(of_gpio_export_init);
+diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
+index c2534d6..8697c82 100644
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -96,7 +96,7 @@ static int gpiod_get_value(const struct gpio_desc *desc);
+ static void gpiod_set_value(struct gpio_desc *desc, int value);
+ static int gpiod_cansleep(const struct gpio_desc *desc);
+ static int gpiod_to_irq(const struct gpio_desc *desc);
+-static int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
++static int gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ static int gpiod_export_link(struct device *dev, const char *name,
+ 			     struct gpio_desc *desc);
+ static int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
+@@ -674,7 +674,7 @@ static ssize_t export_store(struct class *class,
+ 			status = -ENODEV;
+ 		goto done;
+ 	}
+-	status = gpiod_export(desc, true);
++	status = gpiod_export(desc, true, NULL);
+ 	if (status < 0)
+ 		gpiod_free(desc);
+ 	else
+@@ -736,9 +736,10 @@ static struct class gpio_class = {
+ 
+ 
+ /**
+- * gpio_export - export a GPIO through sysfs
++ * gpio_export_with_name - export a GPIO through sysfs
+  * @gpio: gpio to make available, already requested
+  * @direction_may_change: true if userspace may change gpio direction
++ * @name: gpio name
+  * Context: arch_initcall or later
+  *
+  * When drivers want to make a GPIO accessible to userspace after they
+@@ -750,7 +751,7 @@ static struct class gpio_class = {
+  *
+  * Returns zero on success, else an error.
+  */
+-static int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++static int gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ 	unsigned long		flags;
+ 	int			status;
+@@ -783,6 +784,8 @@ static int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+ 		goto fail_unlock;
+ 	}
+ 
++	if (name)
++		ioname = name;
+ 	if (!desc->chip->direction_input || !desc->chip->direction_output)
+ 		direction_may_change = false;
+ 	spin_unlock_irqrestore(&gpio_lock, flags);
+@@ -829,11 +832,11 @@ fail_unlock:
+ 	return status;
+ }
+ 
+-int gpio_export(unsigned gpio, bool direction_may_change)
++int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
+ {
+-	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
++	return gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
+ }
+-EXPORT_SYMBOL_GPL(gpio_export);
++EXPORT_SYMBOL_GPL(gpio_export_with_name);
+ 
+ static int match_export(struct device *dev, const void *data)
+ {
+@@ -1092,7 +1095,7 @@ static inline void gpiochip_unexport(struct gpio_chip *chip)
+ }
+ 
+ static inline int gpiod_export(struct gpio_desc *desc,
+-			       bool direction_may_change)
++			       bool direction_may_change, const char *name)
+ {
+ 	return -ENOSYS;
+ }
+@@ -1521,6 +1524,9 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+ 	if (flags & GPIOF_OPEN_SOURCE)
+ 		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
+ 
++	if (flags & GPIOF_ACTIVE_LOW)
++		set_bit(FLAG_ACTIVE_LOW, &gpio_desc[gpio].flags);
++
+ 	if (flags & GPIOF_DIR_IN)
+ 		err = gpiod_direction_input(desc);
+ 	else
+@@ -1531,7 +1537,7 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+ 		goto free_gpio;
+ 
+ 	if (flags & GPIOF_EXPORT) {
+-		err = gpiod_export(desc, flags & GPIOF_EXPORT_CHANGEABLE);
++		err = gpiod_export(desc, flags & GPIOF_EXPORT_CHANGEABLE, NULL);
+ 		if (err)
+ 			goto free_gpio;
+ 	}
+diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
+index bde6469..3290572 100644
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -202,7 +202,8 @@ extern void gpio_free_array(const struct gpio *array, size_t num);
+  * A sysfs interface can be exported by individual drivers if they want,
+  * but more typically is configured entirely from userspace.
+  */
+-extern int gpio_export(unsigned gpio, bool direction_may_change);
++extern int gpio_export_with_name(unsigned gpio, bool direction_may_change,
++			const char *name);
+ extern int gpio_export_link(struct device *dev, const char *name,
+ 			unsigned gpio);
+ extern int gpio_sysfs_set_active_low(unsigned gpio, int value);
+@@ -284,7 +285,8 @@ struct device;
+ 
+ /* sysfs support is only available with gpiolib, where it's optional */
+ 
+-static inline int gpio_export(unsigned gpio, bool direction_may_change)
++static inline int gpio_export_with_name(unsigned gpio,
++	bool direction_may_change, const char *name)
+ {
+ 	return -ENOSYS;
+ }
+diff --git a/include/linux/gpio.h b/include/linux/gpio.h
+index f6c7ae3..80a574a 100644
+--- a/include/linux/gpio.h
++++ b/include/linux/gpio.h
+@@ -27,6 +27,9 @@
+ #define GPIOF_EXPORT_DIR_FIXED	(GPIOF_EXPORT)
+ #define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
+ 
++#define GPIOF_ACTIVE_LOW	(1 << 6)
++
++
+ /**
+  * struct gpio - a structure describing a GPIO with configuration
+  * @gpio:	the GPIO number
+@@ -169,7 +172,8 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+ 	WARN_ON(1);
+ }
+ 
+-static inline int gpio_export(unsigned gpio, bool direction_may_change)
++static inline int gpio_export_with_name(unsigned gpio,
++	bool direction_may_change, const char *name)
+ {
+ 	/* GPIO can never have been requested or set as {in,out}put */
+ 	WARN_ON(1);
+@@ -236,4 +240,24 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio,
+ 			  unsigned long flags, const char *label);
+ void devm_gpio_free(struct device *dev, unsigned int gpio);
+ 
++/**
++ * gpio_export - export a GPIO through sysfs
++ * @gpio: gpio to make available, already requested
++ * @direction_may_change: true if userspace may change gpio direction
++ * Context: arch_initcall or later
++ *
++ * When drivers want to make a GPIO accessible to userspace after they
++ * have requested it -- perhaps while debugging, or as part of their
++ * public interface -- they may use this routine.  If the GPIO can
++ * change direction (some can't) and the caller allows it, userspace
++ * will see "direction" sysfs attribute which may be used to change
++ * the gpio's direction.  A "value" attribute will always be provided.
++ *
++ * Returns zero on success, else an error.
++ */
++static inline int gpio_export(unsigned gpio,bool direction_may_change)
++{
++	return gpio_export_with_name(gpio, direction_may_change, NULL);
++}
++
+ #endif /* __LINUX_GPIO_H */
+-- 
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.9/0202-owrt-USB-adds-dwc_otg.patch b/target/linux/ramips/patches-3.9/0202-owrt-USB-adds-dwc_otg.patch
new file mode 100644
index 0000000000..65ed512792
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0202-owrt-USB-adds-dwc_otg.patch
@@ -0,0 +1,24517 @@
+From 1a44a003bdaf917193114d0d40534496c39644ba Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 15 Mar 2013 20:58:18 +0100
+Subject: [PATCH 202/208] owrt: USB: adds dwc_otg
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/Kconfig                      |    2 +
+ drivers/usb/Makefile                     |    1 +
+ drivers/usb/dwc_otg/Kconfig              |   24 +
+ drivers/usb/dwc_otg/Makefile             |   25 +
+ drivers/usb/dwc_otg/dummy_audio.c        | 1575 +++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_attr.c       |  966 ++++++++
+ drivers/usb/dwc_otg/dwc_otg_attr.h       |   67 +
+ drivers/usb/dwc_otg/dwc_otg_cil.c        | 3692 ++++++++++++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_cil.h        | 1098 +++++++++
+ drivers/usb/dwc_otg/dwc_otg_cil_intr.c   |  750 ++++++
+ drivers/usb/dwc_otg/dwc_otg_driver.c     | 1273 ++++++++++
+ drivers/usb/dwc_otg/dwc_otg_driver.h     |   83 +
+ drivers/usb/dwc_otg/dwc_otg_hcd.c        | 2852 +++++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd.h        |  668 ++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd_intr.c   | 1873 +++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd_queue.c  |  684 ++++++
+ drivers/usb/dwc_otg/dwc_otg_pcd.c        | 2523 ++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_pcd.h        |  248 ++
+ drivers/usb/dwc_otg/dwc_otg_pcd_intr.c   | 3654 +++++++++++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_regs.h       | 2075 +++++++++++++++++
+ drivers/usb/dwc_otg/linux/dwc_otg_plat.h |  260 +++
+ 21 files changed, 24393 insertions(+)
+ create mode 100644 drivers/usb/dwc_otg/Kconfig
+ create mode 100644 drivers/usb/dwc_otg/Makefile
+ create mode 100644 drivers/usb/dwc_otg/dummy_audio.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_regs.h
+ create mode 100644 drivers/usb/dwc_otg/linux/dwc_otg_plat.h
+
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -126,6 +126,8 @@ source "drivers/usb/core/Kconfig"
+ 
+ source "drivers/usb/dwc3/Kconfig"
+ 
++source "drivers/usb/dwc_otg/Kconfig"
++
+ source "drivers/usb/mon/Kconfig"
+ 
+ source "drivers/usb/wusbcore/Kconfig"
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -9,6 +9,7 @@ obj-$(CONFIG_USB)		+= core/
+ obj-$(CONFIG_USB_OTG_UTILS)	+= otg/
+ 
+ obj-$(CONFIG_USB_DWC3)		+= dwc3/
++obj-$(CONFIG_DWC_OTG)		+= dwc_otg/
+ 
+ obj-$(CONFIG_USB_MON)		+= mon/
+ 
+--- /dev/null
++++ b/drivers/usb/dwc_otg/Kconfig
+@@ -0,0 +1,24 @@
++config DWC_OTG
++	tristate "Ralink RT305X DWC_OTG support"
++	depends on SOC_RT305X
++	---help---
++	  This driver supports Ralink DWC_OTG
++
++choice
++	prompt "USB Operation Mode"
++	depends on DWC_OTG
++	default DWC_OTG_HOST_ONLY
++
++config DWC_OTG_HOST_ONLY
++	bool "HOST ONLY MODE"
++	depends on DWC_OTG
++
++config DWC_OTG_DEVICE_ONLY
++	bool "DEVICE ONLY MODE"
++	depends on DWC_OTG
++
++endchoice
++
++config DWC_OTG_DEBUG
++	bool "Enable debug mode"
++	depends on DWC_OTG
+--- /dev/null
++++ b/drivers/usb/dwc_otg/Makefile
+@@ -0,0 +1,25 @@
++#
++# Makefile for DWC_otg Highspeed USB controller driver
++#
++
++ifeq ($(CONFIG_DWC_OTG_DEBUG),y)
++EXTRA_CFLAGS   += -DDEBUG
++endif
++
++# Use one of the following flags to compile the software in host-only or
++# device-only mode.
++ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y)
++EXTRA_CFLAGS   += -DDWC_HOST_ONLY
++EXTRA_CFLAGS   += -DDWC_EN_ISOC
++endif
++
++ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y)
++EXTRA_CFLAGS   += -DDWC_DEVICE_ONLY
++endif
++
++obj-$(CONFIG_DWC_OTG)	:= dwc_otg.o
++
++dwc_otg-objs	:= dwc_otg_driver.o dwc_otg_attr.o
++dwc_otg-objs	+= dwc_otg_cil.o dwc_otg_cil_intr.o
++dwc_otg-objs	+= dwc_otg_pcd.o dwc_otg_pcd_intr.o
++dwc_otg-objs	+= dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dummy_audio.c
+@@ -0,0 +1,1575 @@
++/*
++ * zero.c -- Gadget Zero, for USB development
++ *
++ * Copyright (C) 2003-2004 David Brownell
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") as published by the Free Software
++ * Foundation, either version 2 of that License or (at your option) any
++ * later version.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++
++/*
++ * Gadget Zero only needs two bulk endpoints, and is an example of how you
++ * can write a hardware-agnostic gadget driver running inside a USB device.
++ *
++ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
++ * affect most of the driver.
++ *
++ * Use it with the Linux host/master side "usbtest" driver to get a basic
++ * functional test of your device-side usb stack, or with "usb-skeleton".
++ *
++ * It supports two similar configurations.  One sinks whatever the usb host
++ * writes, and in return sources zeroes.  The other loops whatever the host
++ * writes back, so the host can read it.  Module options include:
++ *
++ *   buflen=N		default N=4096, buffer size used
++ *   qlen=N		default N=32, how many buffers in the loopback queue
++ *   loopdefault	default false, list loopback config first
++ *
++ * Many drivers will only have one configuration, letting them be much
++ * simpler if they also don't support high speed operation (like this
++ * driver does).
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/smp_lock.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/uts.h>
++#include <linux/version.h>
++#include <linux/device.h>
++#include <linux/moduleparam.h>
++#include <linux/proc_fs.h>
++
++#include <asm/byteorder.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/unaligned.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#include <linux/usb_gadget.h>
++
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++
++
++/**
++ * usb_gadget_get_string - fill out a string descriptor
++ * @table: of c strings encoded using UTF-8
++ * @id: string id, from low byte of wValue in get string descriptor
++ * @buf: at least 256 bytes
++ *
++ * Finds the UTF-8 string matching the ID, and converts it into a
++ * string descriptor in utf16-le.
++ * Returns length of descriptor (always even) or negative errno
++ *
++ * If your driver needs stings in multiple languages, you'll probably
++ * "switch (wIndex) { ... }"  in your ep0 string descriptor logic,
++ * using this routine after choosing which set of UTF-8 strings to use.
++ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
++ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
++ * characters (which are also widely used in C strings).
++ */
++int
++usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
++{
++	struct usb_string	*s;
++	int			len;
++
++	/* descriptor 0 has the language id */
++	if (id == 0) {
++		buf [0] = 4;
++		buf [1] = USB_DT_STRING;
++		buf [2] = (u8) table->language;
++		buf [3] = (u8) (table->language >> 8);
++		return 4;
++	}
++	for (s = table->strings; s && s->s; s++)
++		if (s->id == id)
++			break;
++
++	/* unrecognized: stall. */
++	if (!s || !s->s)
++		return -EINVAL;
++
++	/* string descriptors have length, tag, then UTF16-LE text */
++	len = min ((size_t) 126, strlen (s->s));
++	memset (buf + 2, 0, 2 * len);	/* zero all the bytes */
++	len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len);
++	if (len < 0)
++		return -EINVAL;
++	buf [0] = (len + 1) * 2;
++	buf [1] = USB_DT_STRING;
++	return buf [0];
++}
++
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++/**
++ * usb_descriptor_fillbuf - fill buffer with descriptors
++ * @buf: Buffer to be filled
++ * @buflen: Size of buf
++ * @src: Array of descriptor pointers, terminated by null pointer.
++ *
++ * Copies descriptors into the buffer, returning the length or a
++ * negative error code if they can't all be copied.  Useful when
++ * assembling descriptors for an associated set of interfaces used
++ * as part of configuring a composite device; or in other cases where
++ * sets of descriptors need to be marshaled.
++ */
++int
++usb_descriptor_fillbuf(void *buf, unsigned buflen,
++		const struct usb_descriptor_header **src)
++{
++	u8	*dest = buf;
++
++	if (!src)
++		return -EINVAL;
++
++	/* fill buffer from src[] until null descriptor ptr */
++	for (; 0 != *src; src++) {
++		unsigned		len = (*src)->bLength;
++
++		if (len > buflen)
++			return -EINVAL;
++		memcpy(dest, *src, len);
++		buflen -= len;
++		dest += len;
++	}
++	return dest - (u8 *)buf;
++}
++
++
++/**
++ * usb_gadget_config_buf - builts a complete configuration descriptor
++ * @config: Header for the descriptor, including characteristics such
++ *	as power requirements and number of interfaces.
++ * @desc: Null-terminated vector of pointers to the descriptors (interface,
++ *	endpoint, etc) defining all functions in this device configuration.
++ * @buf: Buffer for the resulting configuration descriptor.
++ * @length: Length of buffer.  If this is not big enough to hold the
++ *	entire configuration descriptor, an error code will be returned.
++ *
++ * This copies descriptors into the response buffer, building a descriptor
++ * for that configuration.  It returns the buffer length or a negative
++ * status code.  The config.wTotalLength field is set to match the length
++ * of the result, but other descriptor fields (including power usage and
++ * interface count) must be set by the caller.
++ *
++ * Gadget drivers could use this when constructing a config descriptor
++ * in response to USB_REQ_GET_DESCRIPTOR.  They will need to patch the
++ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
++ */
++int usb_gadget_config_buf(
++	const struct usb_config_descriptor	*config,
++	void					*buf,
++	unsigned				length,
++	const struct usb_descriptor_header	**desc
++)
++{
++	struct usb_config_descriptor		*cp = buf;
++	int					len;
++
++	/* config descriptor first */
++	if (length < USB_DT_CONFIG_SIZE || !desc)
++		return -EINVAL;
++	*cp = *config;
++
++	/* then interface/endpoint/class/vendor/... */
++	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
++			length - USB_DT_CONFIG_SIZE, desc);
++	if (len < 0)
++		return len;
++	len += USB_DT_CONFIG_SIZE;
++	if (len > 0xffff)
++		return -EINVAL;
++
++	/* patch up the config descriptor */
++	cp->bLength = USB_DT_CONFIG_SIZE;
++	cp->bDescriptorType = USB_DT_CONFIG;
++	cp->wTotalLength = cpu_to_le16(len);
++	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
++	return len;
++}
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++#define RBUF_LEN (1024*1024)
++static int rbuf_start;
++static int rbuf_len;
++static __u8 rbuf[RBUF_LEN];
++
++/*-------------------------------------------------------------------------*/
++
++#define DRIVER_VERSION		"St Patrick's Day 2004"
++
++static const char shortname [] = "zero";
++static const char longname [] = "YAMAHA YST-MS35D USB Speaker  ";
++
++static const char source_sink [] = "source and sink data";
++static const char loopback [] = "loop input to output";
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * driver assumes self-powered hardware, and
++ * has no way for users to trigger remote wakeup.
++ *
++ * this version autoconfigures as much as possible,
++ * which is reasonable for most "bulk-only" drivers.
++ */
++static const char *EP_IN_NAME;		/* source */
++static const char *EP_OUT_NAME;		/* sink */
++
++/*-------------------------------------------------------------------------*/
++
++/* big enough to hold our biggest descriptor */
++#define USB_BUFSIZ	512
++
++struct zero_dev {
++	spinlock_t		lock;
++	struct usb_gadget	*gadget;
++	struct usb_request	*req;		/* for control responses */
++
++	/* when configured, we have one of two configs:
++	 * - source data (in to host) and sink it (out from host)
++	 * - or loop it back (out from host back in to host)
++	 */
++	u8			config;
++	struct usb_ep		*in_ep, *out_ep;
++
++	/* autoresume timer */
++	struct timer_list	resume;
++};
++
++#define xprintk(d,level,fmt,args...) \
++	dev_printk(level , &(d)->gadget->dev , fmt , ## args)
++
++#ifdef DEBUG
++#define DBG(dev,fmt,args...) \
++	xprintk(dev , KERN_DEBUG , fmt , ## args)
++#else
++#define DBG(dev,fmt,args...) \
++	do { } while (0)
++#endif /* DEBUG */
++
++#ifdef VERBOSE
++#define VDBG	DBG
++#else
++#define VDBG(dev,fmt,args...) \
++	do { } while (0)
++#endif /* VERBOSE */
++
++#define ERROR(dev,fmt,args...) \
++	xprintk(dev , KERN_ERR , fmt , ## args)
++#define WARN(dev,fmt,args...) \
++	xprintk(dev , KERN_WARNING , fmt , ## args)
++#define INFO(dev,fmt,args...) \
++	xprintk(dev , KERN_INFO , fmt , ## args)
++
++/*-------------------------------------------------------------------------*/
++
++static unsigned buflen = 4096;
++static unsigned qlen = 32;
++static unsigned pattern = 0;
++
++module_param (buflen, uint, S_IRUGO|S_IWUSR);
++module_param (qlen, uint, S_IRUGO|S_IWUSR);
++module_param (pattern, uint, S_IRUGO|S_IWUSR);
++
++/*
++ * if it's nonzero, autoresume says how many seconds to wait
++ * before trying to wake up the host after suspend.
++ */
++static unsigned autoresume = 0;
++module_param (autoresume, uint, 0);
++
++/*
++ * Normally the "loopback" configuration is second (index 1) so
++ * it's not the default.  Here's where to change that order, to
++ * work better with hosts where config changes are problematic.
++ * Or controllers (like superh) that only support one config.
++ */
++static int loopdefault = 0;
++
++module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
++
++/*-------------------------------------------------------------------------*/
++
++/* Thanks to NetChip Technologies for donating this product ID.
++ *
++ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
++ * Instead:  allocate your own, using normal USB-IF procedures.
++ */
++#ifndef	CONFIG_USB_ZERO_HNPTEST
++#define DRIVER_VENDOR_NUM	0x0525		/* NetChip */
++#define DRIVER_PRODUCT_NUM	0xa4a0		/* Linux-USB "Gadget Zero" */
++#else
++#define DRIVER_VENDOR_NUM	0x1a0a		/* OTG test device IDs */
++#define DRIVER_PRODUCT_NUM	0xbadd
++#endif
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * DESCRIPTORS ... most are static, but strings and (full)
++ * configuration descriptors are built on demand.
++ */
++
++/*
++#define STRING_MANUFACTURER		25
++#define STRING_PRODUCT			42
++#define STRING_SERIAL			101
++*/
++#define STRING_MANUFACTURER		1
++#define STRING_PRODUCT			2
++#define STRING_SERIAL			3
++
++#define STRING_SOURCE_SINK		250
++#define STRING_LOOPBACK			251
++
++/*
++ * This device advertises two configurations; these numbers work
++ * on a pxa250 as well as more flexible hardware.
++ */
++#define	CONFIG_SOURCE_SINK	3
++#define	CONFIG_LOOPBACK		2
++
++/*
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++
++	.bcdUSB =		__constant_cpu_to_le16 (0x0200),
++	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
++
++	.idVendor =		__constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
++	.idProduct =		__constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
++	.iManufacturer =	STRING_MANUFACTURER,
++	.iProduct =		STRING_PRODUCT,
++	.iSerialNumber =	STRING_SERIAL,
++	.bNumConfigurations =	2,
++};
++*/
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++	.bcdUSB =		__constant_cpu_to_le16 (0x0100),
++	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
++	.bDeviceSubClass =      0,
++	.bDeviceProtocol =      0,
++	.bMaxPacketSize0 =      64,
++	.bcdDevice =            __constant_cpu_to_le16 (0x0100),
++	.idVendor =		__constant_cpu_to_le16 (0x0499),
++	.idProduct =		__constant_cpu_to_le16 (0x3002),
++	.iManufacturer =	STRING_MANUFACTURER,
++	.iProduct =		STRING_PRODUCT,
++	.iSerialNumber =	STRING_SERIAL,
++	.bNumConfigurations =	1,
++};
++
++static struct usb_config_descriptor
++z_config = {
++	.bLength =		sizeof z_config,
++	.bDescriptorType =	USB_DT_CONFIG,
++
++	/* compute wTotalLength on the fly */
++	.bNumInterfaces =	2,
++	.bConfigurationValue =	1,
++	.iConfiguration =	0,
++	.bmAttributes =		0x40,
++	.bMaxPower =		0,	/* self-powered */
++};
++
++
++static struct usb_otg_descriptor
++otg_descriptor = {
++	.bLength =		sizeof otg_descriptor,
++	.bDescriptorType =	USB_DT_OTG,
++
++	.bmAttributes =		USB_OTG_SRP,
++};
++
++/* one interface in each configuration */
++#ifdef	CONFIG_USB_GADGET_DUALSPEED
++
++/*
++ * usb 2.0 devices need to expose both high speed and full speed
++ * descriptors, unless they only run at full speed.
++ *
++ * that means alternate endpoint descriptors (bigger packets)
++ * and a "device qualifier" ... plus more construction options
++ * for the config descriptor.
++ */
++
++static struct usb_qualifier_descriptor
++dev_qualifier = {
++	.bLength =		sizeof dev_qualifier,
++	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
++
++	.bcdUSB =		__constant_cpu_to_le16 (0x0200),
++	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
++
++	.bNumConfigurations =	2,
++};
++
++
++struct usb_cs_as_general_descriptor {
++	__u8  bLength;
++	__u8  bDescriptorType;
++
++	__u8  bDescriptorSubType;
++	__u8  bTerminalLink;
++	__u8  bDelay;
++	__u16  wFormatTag;
++} __attribute__ ((packed));
++
++struct usb_cs_as_format_descriptor {
++	__u8  bLength;
++	__u8  bDescriptorType;
++
++	__u8  bDescriptorSubType;
++	__u8  bFormatType;
++	__u8  bNrChannels;
++	__u8  bSubframeSize;
++	__u8  bBitResolution;
++	__u8  bSamfreqType;
++	__u8  tLowerSamFreq[3];
++	__u8  tUpperSamFreq[3];
++} __attribute__ ((packed));
++
++static const struct usb_interface_descriptor
++z_audio_control_if_desc = {
++	.bLength =		sizeof z_audio_control_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 0,
++	.bAlternateSetting = 0,
++	.bNumEndpoints = 0,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x1,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_interface_descriptor
++z_audio_if_desc = {
++	.bLength =		sizeof z_audio_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 1,
++	.bAlternateSetting = 0,
++	.bNumEndpoints = 0,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x2,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_interface_descriptor
++z_audio_if_desc2 = {
++	.bLength =		sizeof z_audio_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 1,
++	.bAlternateSetting = 1,
++	.bNumEndpoints = 1,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x2,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_cs_as_general_descriptor
++z_audio_cs_as_if_desc = {
++	.bLength = 7,
++	.bDescriptorType = 0x24,
++
++	.bDescriptorSubType = 0x01,
++	.bTerminalLink = 0x01,
++	.bDelay = 0x0,
++	.wFormatTag = __constant_cpu_to_le16 (0x0001)
++};
++
++
++static const struct usb_cs_as_format_descriptor
++z_audio_cs_as_format_desc = {
++	.bLength = 0xe,
++	.bDescriptorType = 0x24,
++
++	.bDescriptorSubType = 2,
++	.bFormatType = 1,
++	.bNrChannels = 1,
++	.bSubframeSize = 1,
++	.bBitResolution = 8,
++	.bSamfreqType = 0,
++	.tLowerSamFreq = {0x7e, 0x13, 0x00},
++	.tUpperSamFreq = {0xe2, 0xd6, 0x00},
++};
++
++static const struct usb_endpoint_descriptor
++z_iso_ep = {
++	.bLength = 0x09,
++	.bDescriptorType = 0x05,
++	.bEndpointAddress = 0x04,
++	.bmAttributes = 0x09,
++	.wMaxPacketSize = 0x0038,
++	.bInterval = 0x01,
++	.bRefresh = 0x00,
++	.bSynchAddress = 0x00,
++};
++
++static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++// 9 bytes
++static char z_ac_interface_header_desc[] =
++{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 };
++
++// 12 bytes
++static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02,
++		     0x03, 0x00, 0x00, 0x00};
++// 13 bytes
++static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00,
++		     0x02, 0x00, 0x02, 0x00, 0x00};
++// 9 bytes
++static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02,
++		     0x00};
++
++static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00,
++		      0x00};
++
++static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00,
++		      0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
++		      0x00};
++
++static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00,
++		      0x00};
++
++static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00,
++		      0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
++		      0x00};
++
++static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00,
++		       0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00,
++		       0x00};
++
++static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00,
++		       0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00,
++		       0x00};
++
++static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00,
++		       0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00,
++		       0x00};
++
++static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++
++
++static const struct usb_descriptor_header *z_function [] = {
++	(struct usb_descriptor_header *) &z_audio_control_if_desc,
++	(struct usb_descriptor_header *) &z_ac_interface_header_desc,
++	(struct usb_descriptor_header *) &z_0,
++	(struct usb_descriptor_header *) &z_1,
++	(struct usb_descriptor_header *) &z_2,
++	(struct usb_descriptor_header *) &z_audio_if_desc,
++	(struct usb_descriptor_header *) &z_audio_if_desc2,
++	(struct usb_descriptor_header *) &z_audio_cs_as_if_desc,
++	(struct usb_descriptor_header *) &z_audio_cs_as_format_desc,
++	(struct usb_descriptor_header *) &z_iso_ep,
++	(struct usb_descriptor_header *) &z_iso_ep2,
++	(struct usb_descriptor_header *) &za_0,
++	(struct usb_descriptor_header *) &za_1,
++	(struct usb_descriptor_header *) &za_2,
++	(struct usb_descriptor_header *) &za_3,
++	(struct usb_descriptor_header *) &za_4,
++	(struct usb_descriptor_header *) &za_5,
++	(struct usb_descriptor_header *) &za_6,
++	(struct usb_descriptor_header *) &za_7,
++	(struct usb_descriptor_header *) &za_8,
++	(struct usb_descriptor_header *) &za_9,
++	(struct usb_descriptor_header *) &za_10,
++	(struct usb_descriptor_header *) &za_11,
++	(struct usb_descriptor_header *) &za_12,
++	(struct usb_descriptor_header *) &za_13,
++	(struct usb_descriptor_header *) &za_14,
++	(struct usb_descriptor_header *) &za_15,
++	(struct usb_descriptor_header *) &za_16,
++	(struct usb_descriptor_header *) &za_17,
++	(struct usb_descriptor_header *) &za_18,
++	(struct usb_descriptor_header *) &za_19,
++	(struct usb_descriptor_header *) &za_20,
++	(struct usb_descriptor_header *) &za_21,
++	(struct usb_descriptor_header *) &za_22,
++	(struct usb_descriptor_header *) &za_23,
++	(struct usb_descriptor_header *) &za_24,
++	NULL,
++};
++
++/* maxpacket and other transfer characteristics vary by speed. */
++#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
++
++#else
++
++/* if there's no high speed support, maxpacket doesn't change. */
++#define ep_desc(g,hs,fs) fs
++
++#endif	/* !CONFIG_USB_GADGET_DUALSPEED */
++
++static char				manufacturer [40];
++//static char				serial [40];
++static char				serial [] = "Ser 00 em";
++
++/* static strings, in UTF-8 */
++static struct usb_string		strings [] = {
++	{ STRING_MANUFACTURER, manufacturer, },
++	{ STRING_PRODUCT, longname, },
++	{ STRING_SERIAL, serial, },
++	{ STRING_LOOPBACK, loopback, },
++	{ STRING_SOURCE_SINK, source_sink, },
++	{  }			/* end of list */
++};
++
++static struct usb_gadget_strings	stringtab = {
++	.language	= 0x0409,	/* en-us */
++	.strings	= strings,
++};
++
++/*
++ * config descriptors are also handcrafted.  these must agree with code
++ * that sets configurations, and with code managing interfaces and their
++ * altsettings.  other complexity may come from:
++ *
++ *  - high speed support, including "other speed config" rules
++ *  - multiple configurations
++ *  - interfaces with alternate settings
++ *  - embedded class or vendor-specific descriptors
++ *
++ * this handles high speed, and has a second config that could as easily
++ * have been an alternate interface setting (on most hardware).
++ *
++ * NOTE:  to demonstrate (and test) more USB capabilities, this driver
++ * should include an altsetting to test interrupt transfers, including
++ * high bandwidth modes at high speed.  (Maybe work like Intel's test
++ * device?)
++ */
++static int
++config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index)
++{
++	int len;
++	const struct usb_descriptor_header **function;
++
++	function = z_function;
++	len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function);
++	if (len < 0)
++		return len;
++	((struct usb_config_descriptor *) buf)->bDescriptorType = type;
++	return len;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_request *
++alloc_ep_req (struct usb_ep *ep, unsigned length)
++{
++	struct usb_request	*req;
++
++	req = usb_ep_alloc_request (ep, GFP_ATOMIC);
++	if (req) {
++		req->length = length;
++		req->buf = usb_ep_alloc_buffer (ep, length,
++				&req->dma, GFP_ATOMIC);
++		if (!req->buf) {
++			usb_ep_free_request (ep, req);
++			req = NULL;
++		}
++	}
++	return req;
++}
++
++static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
++{
++	if (req->buf)
++		usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
++	usb_ep_free_request (ep, req);
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* optionally require specific source/sink data patterns  */
++
++static int
++check_read_data (
++	struct zero_dev		*dev,
++	struct usb_ep		*ep,
++	struct usb_request	*req
++)
++{
++	unsigned	i;
++	u8		*buf = req->buf;
++
++	for (i = 0; i < req->actual; i++, buf++) {
++		switch (pattern) {
++		/* all-zeroes has no synchronization issues */
++		case 0:
++			if (*buf == 0)
++				continue;
++			break;
++		/* mod63 stays in sync with short-terminated transfers,
++		 * or otherwise when host and gadget agree on how large
++		 * each usb transfer request should be.  resync is done
++		 * with set_interface or set_config.
++		 */
++		case 1:
++			if (*buf == (u8)(i % 63))
++				continue;
++			break;
++		}
++		ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
++		usb_ep_set_halt (ep);
++		return -EINVAL;
++	}
++	return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void zero_reset_config (struct zero_dev *dev)
++{
++	if (dev->config == 0)
++		return;
++
++	DBG (dev, "reset config\n");
++
++	/* just disable endpoints, forcing completion of pending i/o.
++	 * all our completion handlers free their requests in this case.
++	 */
++	if (dev->in_ep) {
++		usb_ep_disable (dev->in_ep);
++		dev->in_ep = NULL;
++	}
++	if (dev->out_ep) {
++		usb_ep_disable (dev->out_ep);
++		dev->out_ep = NULL;
++	}
++	dev->config = 0;
++	del_timer (&dev->resume);
++}
++
++#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos))
++
++static void
++zero_isoc_complete (struct usb_ep *ep, struct usb_request *req)
++{
++	struct zero_dev	*dev = ep->driver_data;
++	int		status = req->status;
++	int i, j;
++
++	switch (status) {
++
++	case 0: 			/* normal completion? */
++		//printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual);
++		for (i=0, j=rbuf_start; i<req->actual; i++) {
++			//printk ("%02x ", ((__u8*)req->buf)[i]);
++			rbuf[j] = ((__u8*)req->buf)[i];
++			j++;
++			if (j >= RBUF_LEN) j=0;
++		}
++		rbuf_start = j;
++		//printk ("\n\n");
++
++		if (rbuf_len < RBUF_LEN) {
++			rbuf_len += req->actual;
++			if (rbuf_len > RBUF_LEN) {
++				rbuf_len = RBUF_LEN;
++			}
++		}
++
++		break;
++
++	/* this endpoint is normally active while we're configured */
++	case -ECONNABORTED: 		/* hardware forced ep reset */
++	case -ECONNRESET:		/* request dequeued */
++	case -ESHUTDOWN:		/* disconnect from host */
++		VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
++				req->actual, req->length);
++		if (ep == dev->out_ep)
++			check_read_data (dev, ep, req);
++		free_ep_req (ep, req);
++		return;
++
++	case -EOVERFLOW:		/* buffer overrun on read means that
++					 * we didn't provide a big enough
++					 * buffer.
++					 */
++	default:
++#if 1
++		DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
++				status, req->actual, req->length);
++#endif
++	case -EREMOTEIO:		/* short read */
++		break;
++	}
++
++	status = usb_ep_queue (ep, req, GFP_ATOMIC);
++	if (status) {
++		ERROR (dev, "kill %s:  resubmit %d bytes --> %d\n",
++				ep->name, req->length, status);
++		usb_ep_set_halt (ep);
++		/* FIXME recover later ... somehow */
++	}
++}
++
++static struct usb_request *
++zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags)
++{
++	struct usb_request	*req;
++	int			status;
++
++	req = alloc_ep_req (ep, 512);
++	if (!req)
++		return NULL;
++
++	req->complete = zero_isoc_complete;
++
++	status = usb_ep_queue (ep, req, gfp_flags);
++	if (status) {
++		struct zero_dev	*dev = ep->driver_data;
++
++		ERROR (dev, "start %s --> %d\n", ep->name, status);
++		free_ep_req (ep, req);
++		req = NULL;
++	}
++
++	return req;
++}
++
++/* change our operational config.  this code must agree with the code
++ * that returns config descriptors, and altsetting code.
++ *
++ * it's also responsible for power management interactions. some
++ * configurations might not work with our current power sources.
++ *
++ * note that some device controller hardware will constrain what this
++ * code can do, perhaps by disallowing more than one configuration or
++ * by limiting configuration choices (like the pxa2xx).
++ */
++static int
++zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
++{
++	int			result = 0;
++	struct usb_gadget	*gadget = dev->gadget;
++	const struct usb_endpoint_descriptor	*d;
++	struct usb_ep		*ep;
++
++	if (number == dev->config)
++		return 0;
++
++	zero_reset_config (dev);
++
++	gadget_for_each_ep (ep, gadget) {
++
++		if (strcmp (ep->name, "ep4") == 0) {
++
++			d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6
++			result = usb_ep_enable (ep, d);
++
++			if (result == 0) {
++				ep->driver_data = dev;
++				dev->in_ep = ep;
++
++				if (zero_start_isoc_ep (ep, gfp_flags) != 0) {
++
++					dev->in_ep = ep;
++					continue;
++				}
++
++				usb_ep_disable (ep);
++				result = -EIO;
++			}
++		}
++
++	}
++
++	dev->config = number;
++	return result;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
++{
++	if (req->status || req->actual != req->length)
++		DBG ((struct zero_dev *) ep->driver_data,
++				"setup complete --> %d, %d/%d\n",
++				req->status, req->actual, req->length);
++}
++
++/*
++ * The setup() callback implements all the ep0 functionality that's
++ * not handled lower down, in hardware or the hardware driver (like
++ * device and endpoint feature flags, and their status).  It's all
++ * housekeeping for the gadget function we're implementing.  Most of
++ * the work is in config-specific setup.
++ */
++static int
++zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++	struct usb_request	*req = dev->req;
++	int			value = -EOPNOTSUPP;
++
++	/* usually this stores reply data in the pre-allocated ep0 buffer,
++	 * but config change events will reconfigure hardware.
++	 */
++	req->zero = 0;
++	switch (ctrl->bRequest) {
++
++	case USB_REQ_GET_DESCRIPTOR:
++
++		switch (ctrl->wValue >> 8) {
++
++		case USB_DT_DEVICE:
++			value = min (ctrl->wLength, (u16) sizeof device_desc);
++			memcpy (req->buf, &device_desc, value);
++			break;
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++		case USB_DT_DEVICE_QUALIFIER:
++			if (!gadget->is_dualspeed)
++				break;
++			value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
++			memcpy (req->buf, &dev_qualifier, value);
++			break;
++
++		case USB_DT_OTHER_SPEED_CONFIG:
++			if (!gadget->is_dualspeed)
++				break;
++			// FALLTHROUGH
++#endif /* CONFIG_USB_GADGET_DUALSPEED */
++		case USB_DT_CONFIG:
++			value = config_buf (gadget, req->buf,
++					ctrl->wValue >> 8,
++					ctrl->wValue & 0xff);
++			if (value >= 0)
++				value = min (ctrl->wLength, (u16) value);
++			break;
++
++		case USB_DT_STRING:
++			/* wIndex == language code.
++			 * this driver only handles one language, you can
++			 * add string tables for other languages, using
++			 * any UTF-8 characters
++			 */
++			value = usb_gadget_get_string (&stringtab,
++					ctrl->wValue & 0xff, req->buf);
++			if (value >= 0) {
++				value = min (ctrl->wLength, (u16) value);
++			}
++			break;
++		}
++		break;
++
++	/* currently two configs, two speeds */
++	case USB_REQ_SET_CONFIGURATION:
++		if (ctrl->bRequestType != 0)
++			goto unknown;
++
++		spin_lock (&dev->lock);
++		value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC);
++		spin_unlock (&dev->lock);
++		break;
++	case USB_REQ_GET_CONFIGURATION:
++		if (ctrl->bRequestType != USB_DIR_IN)
++			goto unknown;
++		*(u8 *)req->buf = dev->config;
++		value = min (ctrl->wLength, (u16) 1);
++		break;
++
++	/* until we add altsetting support, or other interfaces,
++	 * only 0/0 are possible.  pxa2xx only supports 0/0 (poorly)
++	 * and already killed pending endpoint I/O.
++	 */
++	case USB_REQ_SET_INTERFACE:
++
++		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
++			goto unknown;
++		spin_lock (&dev->lock);
++		if (dev->config) {
++			u8		config = dev->config;
++
++			/* resets interface configuration, forgets about
++			 * previous transaction state (queued bufs, etc)
++			 * and re-inits endpoint state (toggle etc)
++			 * no response queued, just zero status == success.
++			 * if we had more than one interface we couldn't
++			 * use this "reset the config" shortcut.
++			 */
++			zero_reset_config (dev);
++			zero_set_config (dev, config, GFP_ATOMIC);
++			value = 0;
++		}
++		spin_unlock (&dev->lock);
++		break;
++	case USB_REQ_GET_INTERFACE:
++		if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) {
++			value = ctrl->wLength;
++			break;
++		}
++		else {
++			if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
++				goto unknown;
++			if (!dev->config)
++				break;
++			if (ctrl->wIndex != 0) {
++				value = -EDOM;
++				break;
++			}
++			*(u8 *)req->buf = 0;
++			value = min (ctrl->wLength, (u16) 1);
++		}
++		break;
++
++	/*
++	 * These are the same vendor-specific requests supported by
++	 * Intel's USB 2.0 compliance test devices.  We exceed that
++	 * device spec by allowing multiple-packet requests.
++	 */
++	case 0x5b:	/* control WRITE test -- fill the buffer */
++		if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
++			goto unknown;
++		if (ctrl->wValue || ctrl->wIndex)
++			break;
++		/* just read that many bytes into the buffer */
++		if (ctrl->wLength > USB_BUFSIZ)
++			break;
++		value = ctrl->wLength;
++		break;
++	case 0x5c:	/* control READ test -- return the buffer */
++		if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
++			goto unknown;
++		if (ctrl->wValue || ctrl->wIndex)
++			break;
++		/* expect those bytes are still in the buffer; send back */
++		if (ctrl->wLength > USB_BUFSIZ
++				|| ctrl->wLength != req->length)
++			break;
++		value = ctrl->wLength;
++		break;
++
++	case 0x01: // SET_CUR
++	case 0x02:
++	case 0x03:
++	case 0x04:
++	case 0x05:
++		value = ctrl->wLength;
++		break;
++	case 0x81:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0xe3;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x00;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x81;
++		//((u8*)req->buf)[1] = 0x81;
++		value = ctrl->wLength;
++		break;
++	case 0x82:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0xc3;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x00;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x82;
++		//((u8*)req->buf)[1] = 0x82;
++		value = ctrl->wLength;
++		break;
++	case 0x83:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0x00;
++			break;
++		case 0x0300:
++			((u8*)req->buf)[0] = 0x60;
++			break;
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x18;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x83;
++		//((u8*)req->buf)[1] = 0x83;
++		value = ctrl->wLength;
++		break;
++	case 0x84:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0x01;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x08;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x84;
++		//((u8*)req->buf)[1] = 0x84;
++		value = ctrl->wLength;
++		break;
++	case 0x85:
++		((u8*)req->buf)[0] = 0x85;
++		((u8*)req->buf)[1] = 0x85;
++		value = ctrl->wLength;
++		break;
++
++
++	default:
++unknown:
++		printk("unknown control req%02x.%02x v%04x i%04x l%d\n",
++			ctrl->bRequestType, ctrl->bRequest,
++			ctrl->wValue, ctrl->wIndex, ctrl->wLength);
++	}
++
++	/* respond with data transfer before status phase? */
++	if (value >= 0) {
++		req->length = value;
++		req->zero = value < ctrl->wLength
++				&& (value % gadget->ep0->maxpacket) == 0;
++		value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
++		if (value < 0) {
++			DBG (dev, "ep_queue < 0 --> %d\n", value);
++			req->status = 0;
++			zero_setup_complete (gadget->ep0, req);
++		}
++	}
++
++	/* device either stalls (value < 0) or reports success */
++	return value;
++}
++
++static void
++zero_disconnect (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++	unsigned long		flags;
++
++	spin_lock_irqsave (&dev->lock, flags);
++	zero_reset_config (dev);
++
++	/* a more significant application might have some non-usb
++	 * activities to quiesce here, saving resources like power
++	 * or pushing the notification up a network stack.
++	 */
++	spin_unlock_irqrestore (&dev->lock, flags);
++
++	/* next we may get setup() calls to enumerate new connections;
++	 * or an unbind() during shutdown (including removing module).
++	 */
++}
++
++static void
++zero_autoresume (unsigned long _dev)
++{
++	struct zero_dev	*dev = (struct zero_dev *) _dev;
++	int		status;
++
++	/* normally the host would be woken up for something
++	 * more significant than just a timer firing...
++	 */
++	if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
++		status = usb_gadget_wakeup (dev->gadget);
++		DBG (dev, "wakeup --> %d\n", status);
++	}
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void
++zero_unbind (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	DBG (dev, "unbind\n");
++
++	/* we've already been disconnected ... no i/o is active */
++	if (dev->req)
++		free_ep_req (gadget->ep0, dev->req);
++	del_timer_sync (&dev->resume);
++	kfree (dev);
++	set_gadget_data (gadget, NULL);
++}
++
++static int
++zero_bind (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev;
++	//struct usb_ep		*ep;
++
++	printk("binding\n");
++	/*
++	 * DRIVER POLICY CHOICE:  you may want to do this differently.
++	 * One thing to avoid is reusing a bcdDevice revision code
++	 * with different host-visible configurations or behavior
++	 * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
++	 */
++	//device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
++
++
++	/* ok, we made sense of the hardware ... */
++	dev = kmalloc (sizeof *dev, SLAB_KERNEL);
++	if (!dev)
++		return -ENOMEM;
++	memset (dev, 0, sizeof *dev);
++	spin_lock_init (&dev->lock);
++	dev->gadget = gadget;
++	set_gadget_data (gadget, dev);
++
++	/* preallocate control response and buffer */
++	dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
++	if (!dev->req)
++		goto enomem;
++	dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
++				&dev->req->dma, GFP_KERNEL);
++	if (!dev->req->buf)
++		goto enomem;
++
++	dev->req->complete = zero_setup_complete;
++
++	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
++
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++	/* assume ep0 uses the same value for both speeds ... */
++	dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
++
++	/* and that all endpoints are dual-speed */
++	//hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
++	//hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
++#endif
++
++	usb_gadget_set_selfpowered (gadget);
++
++	init_timer (&dev->resume);
++	dev->resume.function = zero_autoresume;
++	dev->resume.data = (unsigned long) dev;
++
++	gadget->ep0->driver_data = dev;
++
++	INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
++	INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
++		EP_OUT_NAME, EP_IN_NAME);
++
++	snprintf (manufacturer, sizeof manufacturer,
++		UTS_SYSNAME " " UTS_RELEASE " with %s",
++		gadget->name);
++
++	return 0;
++
++enomem:
++	zero_unbind (gadget);
++	return -ENOMEM;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void
++zero_suspend (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	if (gadget->speed == USB_SPEED_UNKNOWN)
++		return;
++
++	if (autoresume) {
++		mod_timer (&dev->resume, jiffies + (HZ * autoresume));
++		DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
++	} else
++		DBG (dev, "suspend\n");
++}
++
++static void
++zero_resume (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	DBG (dev, "resume\n");
++	del_timer (&dev->resume);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_gadget_driver zero_driver = {
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++	.speed		= USB_SPEED_HIGH,
++#else
++	.speed		= USB_SPEED_FULL,
++#endif
++	.function	= (char *) longname,
++	.bind		= zero_bind,
++	.unbind		= zero_unbind,
++
++	.setup		= zero_setup,
++	.disconnect	= zero_disconnect,
++
++	.suspend	= zero_suspend,
++	.resume		= zero_resume,
++
++	.driver 	= {
++		.name		= (char *) shortname,
++		// .shutdown = ...
++		// .suspend = ...
++		// .resume = ...
++	},
++};
++
++MODULE_AUTHOR ("David Brownell");
++MODULE_LICENSE ("Dual BSD/GPL");
++
++static struct proc_dir_entry *pdir, *pfile;
++
++static int isoc_read_data (char *page, char **start,
++			   off_t off, int count,
++			   int *eof, void *data)
++{
++	int i;
++	static int c = 0;
++	static int done = 0;
++	static int s = 0;
++
++/*
++	printk ("\ncount: %d\n", count);
++	printk ("rbuf_start: %d\n", rbuf_start);
++	printk ("rbuf_len: %d\n", rbuf_len);
++	printk ("off: %d\n", off);
++	printk ("start: %p\n\n", *start);
++*/
++	if (done) {
++		c = 0;
++		done = 0;
++		*eof = 1;
++		return 0;
++	}
++
++	if (c == 0) {
++		if (rbuf_len == RBUF_LEN)
++			s = rbuf_start;
++		else s = 0;
++	}
++
++	for (i=0; i<count && c<rbuf_len; i++, c++) {
++		page[i] = rbuf[(c+s) % RBUF_LEN];
++	}
++	*start = page;
++
++	if (c >= rbuf_len) {
++		*eof = 1;
++		done = 1;
++	}
++
++
++	return i;
++}
++
++static int __init init (void)
++{
++
++	int retval = 0;
++
++	pdir = proc_mkdir("isoc_test", NULL);
++	if(pdir == NULL) {
++		retval = -ENOMEM;
++		printk("Error creating dir\n");
++		goto done;
++	}
++	pdir->owner = THIS_MODULE;
++
++	pfile = create_proc_read_entry("isoc_data",
++				       0444, pdir,
++				       isoc_read_data,
++				       NULL);
++	if (pfile == NULL) {
++		retval = -ENOMEM;
++		printk("Error creating file\n");
++		goto no_file;
++	}
++	pfile->owner = THIS_MODULE;
++
++	return usb_gadget_register_driver (&zero_driver);
++
++ no_file:
++	remove_proc_entry("isoc_data", NULL);
++ done:
++	return retval;
++}
++module_init (init);
++
++static void __exit cleanup (void)
++{
++
++	usb_gadget_unregister_driver (&zero_driver);
++
++	remove_proc_entry("isoc_data", pdir);
++	remove_proc_entry("isoc_test", NULL);
++}
++module_exit (cleanup);
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_attr.c
+@@ -0,0 +1,966 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1064918 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.  The Linux driver attributes
++ * feature will be used to provide the Linux Diagnostic
++ * Interface. These attributes are accessed through sysfs.
++ */
++
++/** @page "Linux Module Attributes"
++ *
++ * The Linux module attributes feature is used to provide the Linux
++ * Diagnostic Interface.  These attributes are accessed through sysfs.
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.
++
++
++ The following table shows the attributes.
++ <table>
++ <tr>
++ <td><b> Name</b></td>
++ <td><b> Description</b></td>
++ <td><b> Access</b></td>
++ </tr>
++
++ <tr>
++ <td> mode </td>
++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hnpcapable </td>
++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srpcapable </td>
++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> hnp </td>
++ <td> Initiates the Host Negotiation Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srp </td>
++ <td> Initiates the Session Request Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> buspower </td>
++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> bussuspend </td>
++ <td> Suspends the USB bus.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> busconnected </td>
++ <td> Gets the connection status of the bus</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> gotgctl </td>
++ <td> Gets or sets the Core Control Status Register.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gusbcfg </td>
++ <td> Gets or sets the Core USB Configuration Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> grxfsiz </td>
++ <td> Gets or sets the Receive FIFO Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gnptxfsiz </td>
++ <td> Gets or sets the non-periodic Transmit Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gpvndctl </td>
++ <td> Gets or sets the PHY Vendor Control Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> ggpio </td>
++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
++ or sets the upper 16 bits.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> guid </td>
++ <td> Gets or sets the value of the User ID Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gsnpsid </td>
++ <td> Gets the value of the Synopsys ID Regester</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> devspeed </td>
++ <td> Gets or sets the device speed setting in the DCFG register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> enumspeed </td>
++ <td> Gets the device enumeration Speed.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hptxfsiz </td>
++ <td> Gets the value of the Host Periodic Transmit FIFO</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hprt0 </td>
++ <td> Gets or sets the value in the Host Port Control and Status Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regoffset </td>
++ <td> Sets the register offset for the next Register Access</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regvalue </td>
++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> remote_wakeup </td>
++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
++ Wakeup signalling bit in the Device Control Register is set for 1
++ milli-second.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> spramdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcddump </td>
++ <td> Dumps the current HCD state.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcd_frrem </td>
++ <td> Shows the average value of the Frame Remaining
++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
++ occurs. This can be used to determine the average interrupt latency. Also
++ shows the average Frame Remaining value for start_transfer and the "a" and
++ "b" sample points. The "a" and "b" sample points may be used during debugging
++ bto determine how long it takes to execute a section of the HCD code.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> rd_reg_test </td>
++ <td> Displays the time required to read the GNPTXFSIZ register many times
++ (the output shows the number of times the register is read).
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> wr_reg_test </td>
++ <td> Displays the time required to write the GNPTXFSIZ register many times
++ (the output shows the number of times the register is written).
++ <td> Read</td>
++ </tr>
++
++ </table>
++
++ Example usage:
++ To get the current mode:
++ cat /sys/devices/lm0/mode
++
++ To power down the USB:
++ echo 0 > /sys/devices/lm0/buspower
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h>  /* permission constants */
++#include <linux/version.h>
++
++#include <asm/io.h>
++
++#include "linux/dwc_otg_plat.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_hcd.h"
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++/*
++ * MACROs for defining sysfs attribute
++ */
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);		\
++	uint32_t val; \
++	val = dwc_read_reg32 (_addr_); \
++	val = (val & (_mask_)) >> _shift_; \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	uint32_t clear = set; \
++	clear = ((~clear) << _shift_) & _mask_; \
++	set = (set << _shift_) & _mask_; \
++	dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
++	dwc_modify_reg32(_addr_, clear, set); \
++	return count; \
++}
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
++	uint32_t val; \
++	val = dwc_read_reg32 (_addr_); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
++	dwc_write_reg32(_addr_, val); \
++	return count; \
++}
++
++#else
++
++/*
++ * MACROs for defining sysfs attribute
++ */
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t val; \
++	val = dwc_read_reg32 (_addr_); \
++	val = (val & (_mask_)) >> _shift_; \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	uint32_t clear = set; \
++	clear = ((~clear) << _shift_) & _mask_; \
++	set = (set << _shift_) & _mask_; \
++	dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
++	dwc_modify_reg32(_addr_, clear, set); \
++	return count; \
++}
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t val; \
++	val = dwc_read_reg32 (_addr_); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
++	dwc_write_reg32(_addr_, val); \
++	return count; \
++}
++
++#endif
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++
++/** @name Functions for Show/Store of Attributes */
++/**@{*/
++
++/**
++ * Show the register offset of the Register Access.
++ */
++static ssize_t regoffset_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			       struct device_attribute *attr,
++#endif
++			       char *buf)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
++}
++
++/**
++ * Set the register offset for the next Register Access 	Read/Write
++ */
++static ssize_t regoffset_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++				struct device_attribute *attr,
++#endif
++				const char *buf,
++				size_t count )
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	uint32_t offset = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x\n", offset);
++	if (offset < 0x00040000 ) {
++		otg_dev->reg_offset = offset;
++	}
++	else {
++		dev_err( _dev, "invalid offset\n" );
++	}
++
++	return count;
++}
++DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, (void *)regoffset_show, regoffset_store);
++
++
++/**
++ * Show the value of the register at the offset in the reg_offset
++ * attribute.
++ */
++static ssize_t regvalue_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			      struct device_attribute *attr,
++#endif
++			      char *buf)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	uint32_t val;
++	volatile uint32_t *addr;
++
++	if (otg_dev->reg_offset != 0xFFFFFFFF &&
++	    0 != otg_dev->base) {
++		/* Calculate the address */
++		addr = (uint32_t*)(otg_dev->reg_offset +
++				   (uint8_t*)otg_dev->base);
++		//dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
++		val = dwc_read_reg32( addr );
++		return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
++				"Reg@0x%06x = 0x%08x\n",
++				otg_dev->reg_offset, val);
++	}
++	else {
++		dev_err(_dev, "Invalid offset (0x%0x)\n",
++			otg_dev->reg_offset);
++		return sprintf(buf, "invalid offset\n" );
++	}
++}
++
++/**
++ * Store the value in the register at the offset in the reg_offset
++ * attribute.
++ *
++ */
++static ssize_t regvalue_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			       struct device_attribute *attr,
++#endif
++			       const char *buf,
++			       size_t count )
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	volatile uint32_t * addr;
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
++	if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
++		/* Calculate the address */
++		addr = (uint32_t*)(otg_dev->reg_offset +
++				   (uint8_t*)otg_dev->base);
++		//dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
++		dwc_write_reg32( addr, val );
++	}
++	else {
++		dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
++			otg_dev->reg_offset);
++	}
++	return count;
++}
++DEVICE_ATTR(regvalue,  S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
++
++/*
++ * Attributes
++ */
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
++
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
++
++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
++DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
++
++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
++
++
++/**
++ * @todo Add code to initiate the HNP.
++ */
++/**
++ * Show the HNP status bit
++ */
++static ssize_t hnp_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			 struct device_attribute *attr,
++#endif
++			 char *buf)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	gotgctl_data_t val;
++	val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++	return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
++}
++
++/**
++ * Set the HNP Request bit
++ */
++static ssize_t hnp_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			  struct device_attribute *attr,
++#endif
++			  const char *buf,
++			  size_t count )
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
++	gotgctl_data_t mem;
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.hnpreq = in;
++	dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++	return count;
++}
++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
++
++/**
++ * @todo Add code to initiate the SRP.
++ */
++/**
++ * Show the SRP status bit
++ */
++static ssize_t srp_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			 struct device_attribute *attr,
++#endif
++			 char *buf)
++{
++#ifndef DWC_HOST_ONLY
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	gotgctl_data_t val;
++	val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++	return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++
++
++/**
++ * Set the SRP Request bit
++ */
++static ssize_t srp_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			  struct device_attribute *attr,
++#endif
++			  const char *buf,
++			  size_t count )
++{
++#ifndef DWC_HOST_ONLY
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	dwc_otg_pcd_initiate_srp(otg_dev->pcd);
++#endif
++	return count;
++}
++DEVICE_ATTR(srp, 0644, srp_show, srp_store);
++
++/**
++ * @todo Need to do more for power on/off?
++ */
++/**
++ * Show the Bus Power status
++ */
++static ssize_t buspower_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			      struct device_attribute *attr,
++#endif
++			      char *buf)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	hprt0_data_t val;
++	val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++	return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
++}
++
++
++/**
++ * Set the Bus Power status
++ */
++static ssize_t buspower_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			       struct device_attribute *attr,
++#endif
++			       const char *buf,
++			       size_t count )
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	uint32_t on = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++	hprt0_data_t mem;
++
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.prtpwr = on;
++
++	//dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++
++	return count;
++}
++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
++
++/**
++ * @todo Need to do more for suspend?
++ */
++/**
++ * Show the Bus Suspend status
++ */
++static ssize_t bussuspend_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++				struct device_attribute *attr,
++#endif
++				char *buf)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	hprt0_data_t val;
++	val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++	return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++}
++
++/**
++ * Set the Bus Suspend status
++ */
++static ssize_t bussuspend_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++				 struct device_attribute *attr,
++#endif
++				 const char *buf,
++				 size_t count )
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++	hprt0_data_t mem;
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.prtsusp = in;
++	dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++	return count;
++}
++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
++
++/**
++ * Show the status of Remote Wakeup.
++ */
++static ssize_t remote_wakeup_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++				   struct device_attribute *attr,
++#endif
++				   char *buf)
++{
++#ifndef DWC_HOST_ONLY
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	dctl_data_t val;
++	val.d32 =
++		dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
++	return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n",
++			val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++/**
++ * Initiate a remote wakeup of the host.  The Device control register
++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
++ * flag is set.
++ *
++ */
++static ssize_t remote_wakeup_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++				    struct device_attribute *attr,
++#endif
++				    const char *buf,
++				    size_t count )
++{
++#ifndef DWC_HOST_ONLY
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	if (val&1) {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
++	}
++	else {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
++	}
++#endif
++	return count;
++}
++DEVICE_ATTR(remote_wakeup,  S_IRUGO|S_IWUSR, remote_wakeup_show,
++	    remote_wakeup_store);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t regdump_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			     struct device_attribute *attr,
++#endif
++			     char *buf)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++        dwc_otg_dump_global_registers( otg_dev->core_if);
++        if (dwc_otg_is_host_mode(otg_dev->core_if)) {
++                dwc_otg_dump_host_registers( otg_dev->core_if);
++        } else {
++                dwc_otg_dump_dev_registers( otg_dev->core_if);
++
++        }
++   	return sprintf( buf, "Register Dump\n" );
++}
++
++DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t spramdump_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			       struct device_attribute *attr,
++#endif
++			       char *buf)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++        dwc_otg_dump_spram( otg_dev->core_if);
++
++        return sprintf( buf, "SPRAM Dump\n" );
++}
++
++DEVICE_ATTR(spramdump, S_IRUGO|S_IWUSR, spramdump_show, 0);
++
++/**
++ * Dump the current hcd state.
++ */
++static ssize_t hcddump_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			     struct device_attribute *attr,
++#endif
++			     char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	dwc_otg_hcd_dump_state(otg_dev->hcd);
++#endif
++   	return sprintf( buf, "HCD Dump\n" );
++}
++
++DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ */
++static ssize_t hcd_frrem_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++			       struct device_attribute *attr,
++#endif
++			       char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	dwc_otg_hcd_dump_frrem(otg_dev->hcd);
++#endif
++   	return sprintf( buf, "HCD Dump Frame Remaining\n" );
++}
++
++DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
++
++/**
++ * Displays the time required to read the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is read).
++ */
++#define RW_REG_COUNT 10000000
++#define MSEC_PER_JIFFIE 1000/HZ
++static ssize_t rd_reg_test_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++				 struct device_attribute *attr,
++#endif
++				 char *buf)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	int i;
++	int time;
++	int start_jiffies;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++	}
++	time = jiffies - start_jiffies;
++   	return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++			RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
++}
++
++DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
++
++/**
++ * Displays the time required to write the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is written).
++ */
++static ssize_t wr_reg_test_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++				 struct device_attribute *attr,
++#endif
++				 char *buf)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	uint32_t reg_val;
++	int i;
++	int time;
++	int start_jiffies;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
++	}
++	time = jiffies - start_jiffies;
++   	return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++			RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
++/**@}*/
++
++/**
++ * Create the device files
++ */
++void dwc_otg_attr_create (struct device *dev)
++{
++	int error;
++
++	error = device_create_file(dev, &dev_attr_regoffset);
++	error = device_create_file(dev, &dev_attr_regvalue);
++	error = device_create_file(dev, &dev_attr_mode);
++	error = device_create_file(dev, &dev_attr_hnpcapable);
++	error = device_create_file(dev, &dev_attr_srpcapable);
++	error = device_create_file(dev, &dev_attr_hnp);
++	error = device_create_file(dev, &dev_attr_srp);
++	error = device_create_file(dev, &dev_attr_buspower);
++	error = device_create_file(dev, &dev_attr_bussuspend);
++	error = device_create_file(dev, &dev_attr_busconnected);
++	error = device_create_file(dev, &dev_attr_gotgctl);
++	error = device_create_file(dev, &dev_attr_gusbcfg);
++	error = device_create_file(dev, &dev_attr_grxfsiz);
++	error = device_create_file(dev, &dev_attr_gnptxfsiz);
++	error = device_create_file(dev, &dev_attr_gpvndctl);
++	error = device_create_file(dev, &dev_attr_ggpio);
++	error = device_create_file(dev, &dev_attr_guid);
++	error = device_create_file(dev, &dev_attr_gsnpsid);
++	error = device_create_file(dev, &dev_attr_devspeed);
++	error = device_create_file(dev, &dev_attr_enumspeed);
++	error = device_create_file(dev, &dev_attr_hptxfsiz);
++	error = device_create_file(dev, &dev_attr_hprt0);
++	error = device_create_file(dev, &dev_attr_remote_wakeup);
++	error = device_create_file(dev, &dev_attr_regdump);
++	error = device_create_file(dev, &dev_attr_spramdump);
++	error = device_create_file(dev, &dev_attr_hcddump);
++	error = device_create_file(dev, &dev_attr_hcd_frrem);
++	error = device_create_file(dev, &dev_attr_rd_reg_test);
++	error = device_create_file(dev, &dev_attr_wr_reg_test);
++}
++
++/**
++ * Remove the device files
++ */
++void dwc_otg_attr_remove (struct device *dev)
++{
++	device_remove_file(dev, &dev_attr_regoffset);
++	device_remove_file(dev, &dev_attr_regvalue);
++	device_remove_file(dev, &dev_attr_mode);
++	device_remove_file(dev, &dev_attr_hnpcapable);
++	device_remove_file(dev, &dev_attr_srpcapable);
++	device_remove_file(dev, &dev_attr_hnp);
++	device_remove_file(dev, &dev_attr_srp);
++	device_remove_file(dev, &dev_attr_buspower);
++	device_remove_file(dev, &dev_attr_bussuspend);
++	device_remove_file(dev, &dev_attr_busconnected);
++	device_remove_file(dev, &dev_attr_gotgctl);
++	device_remove_file(dev, &dev_attr_gusbcfg);
++	device_remove_file(dev, &dev_attr_grxfsiz);
++	device_remove_file(dev, &dev_attr_gnptxfsiz);
++	device_remove_file(dev, &dev_attr_gpvndctl);
++	device_remove_file(dev, &dev_attr_ggpio);
++	device_remove_file(dev, &dev_attr_guid);
++	device_remove_file(dev, &dev_attr_gsnpsid);
++	device_remove_file(dev, &dev_attr_devspeed);
++	device_remove_file(dev, &dev_attr_enumspeed);
++	device_remove_file(dev, &dev_attr_hptxfsiz);
++	device_remove_file(dev, &dev_attr_hprt0);
++	device_remove_file(dev, &dev_attr_remote_wakeup);
++	device_remove_file(dev, &dev_attr_regdump);
++	device_remove_file(dev, &dev_attr_spramdump);
++	device_remove_file(dev, &dev_attr_hcddump);
++	device_remove_file(dev, &dev_attr_hcd_frrem);
++	device_remove_file(dev, &dev_attr_rd_reg_test);
++	device_remove_file(dev, &dev_attr_wr_reg_test);
++}
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_attr.h
+@@ -0,0 +1,67 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 477051 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_ATTR_H__)
++#define __DWC_OTG_ATTR_H__
++
++/** @file
++ * This file contains the interface to the Linux device attributes.
++ */
++extern struct device_attribute dev_attr_regoffset;
++extern struct device_attribute dev_attr_regvalue;
++
++extern struct device_attribute dev_attr_mode;
++extern struct device_attribute dev_attr_hnpcapable;
++extern struct device_attribute dev_attr_srpcapable;
++extern struct device_attribute dev_attr_hnp;
++extern struct device_attribute dev_attr_srp;
++extern struct device_attribute dev_attr_buspower;
++extern struct device_attribute dev_attr_bussuspend;
++extern struct device_attribute dev_attr_busconnected;
++extern struct device_attribute dev_attr_gotgctl;
++extern struct device_attribute dev_attr_gusbcfg;
++extern struct device_attribute dev_attr_grxfsiz;
++extern struct device_attribute dev_attr_gnptxfsiz;
++extern struct device_attribute dev_attr_gpvndctl;
++extern struct device_attribute dev_attr_ggpio;
++extern struct device_attribute dev_attr_guid;
++extern struct device_attribute dev_attr_gsnpsid;
++extern struct device_attribute dev_attr_devspeed;
++extern struct device_attribute dev_attr_enumspeed;
++extern struct device_attribute dev_attr_hptxfsiz;
++extern struct device_attribute dev_attr_hprt0;
++
++void dwc_otg_attr_create (struct device *dev);
++void dwc_otg_attr_remove (struct device *dev);
++
++#endif
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil.c
+@@ -0,0 +1,3692 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
++ * $Revision: 1.7 $
++ * $Date: 2008-12-22 11:43:05 $
++ * $Change: 1117667 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * The CIL manages the memory map for the core so that the HCD and PCD
++ * don't have to do this separately. It also handles basic tasks like
++ * reading/writing the registers and data FIFOs in the controller.
++ * Some of the data access functions provide encapsulation of several
++ * operations required to perform a task, such as writing multiple
++ * registers to start a transfer. Finally, the CIL performs basic
++ * services that are not specific to either the host or device modes
++ * of operation. These services include management of the OTG Host
++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
++ * Diagnostic API is also provided to allow testing of the controller
++ * hardware.
++ *
++ * The Core Interface Layer has the following requirements:
++ * - Provides basic controller operations.
++ * - Minimal use of OS services.
++ * - The OS services used will be abstracted by using inline functions
++ *	 or macros.
++ *
++ */
++#include <asm/unaligned.h>
++#include <linux/dma-mapping.h>
++#ifdef DEBUG
++#include <linux/jiffies.h>
++#endif
++
++#include "linux/dwc_otg_plat.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++/* Included only to access hc->qh for non-dword buffer handling
++ * TODO: account it
++ */
++#include "dwc_otg_hcd.h"
++
++/**
++ * This function is called to initialize the DWC_otg CSR data
++ * structures.	The register addresses in the device and host
++ * structures are initialized from the base address supplied by the
++ * caller.	The calling function must make the OS calls to get the
++ * base address of the DWC_otg controller registers.  The core_params
++ * argument holds the parameters that specify how the core should be
++ * configured.
++ *
++ * @param[in] reg_base_addr Base address of DWC_otg core registers
++ * @param[in] core_params Pointer to the core configuration parameters
++ *
++ */
++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr,
++					dwc_otg_core_params_t *core_params)
++{
++	dwc_otg_core_if_t *core_if = 0;
++	dwc_otg_dev_if_t *dev_if = 0;
++	dwc_otg_host_if_t *host_if = 0;
++	uint8_t *reg_base = (uint8_t *)reg_base_addr;
++	int i = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params);
++
++	core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL);
++
++	if (core_if == 0) {
++		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
++		return 0;
++	}
++
++	memset(core_if, 0, sizeof(dwc_otg_core_if_t));
++
++	core_if->core_params = core_params;
++	core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
++
++	/*
++	 * Allocate the Device Mode structures.
++	 */
++	dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
++
++	if (dev_if == 0) {
++		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
++		kfree(core_if);
++		return 0;
++	}
++
++	dev_if->dev_global_regs =
++			(dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
++
++	for (i=0; i<MAX_EPS_CHANNELS; i++)
++	{
++		dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
++				(reg_base + DWC_DEV_IN_EP_REG_OFFSET +
++				 (i * DWC_EP_REG_OFFSET));
++
++		dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
++				(reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
++				 (i * DWC_EP_REG_OFFSET));
++		DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
++					i, &dev_if->in_ep_regs[i]->diepctl);
++		DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
++					i, &dev_if->out_ep_regs[i]->doepctl);
++	}
++
++	dev_if->speed = 0; // unknown
++
++	core_if->dev_if = dev_if;
++
++	/*
++	 * Allocate the Host Mode structures.
++	 */
++	host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL);
++
++	if (host_if == 0) {
++		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
++		kfree(dev_if);
++		kfree(core_if);
++		return 0;
++	}
++
++	host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
++			(reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
++
++	host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
++
++	for (i=0; i<MAX_EPS_CHANNELS; i++)
++	{
++		host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
++				(reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
++				 (i * DWC_OTG_CHAN_REGS_OFFSET));
++		DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
++					i, &host_if->hc_regs[i]->hcchar);
++	}
++
++	host_if->num_host_channels = MAX_EPS_CHANNELS;
++	core_if->host_if = host_if;
++
++	for (i=0; i<MAX_EPS_CHANNELS; i++)
++	{
++		core_if->data_fifo[i] =
++				(uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
++							 (i * DWC_OTG_DATA_FIFO_SIZE));
++		DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
++					i, (unsigned)core_if->data_fifo[i]);
++	}
++
++	core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
++
++	/*
++	 * Store the contents of the hardware configuration registers here for
++	 * easy access later.
++	 */
++	core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
++	core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
++	core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
++	core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
++
++	DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
++	DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
++	DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
++	DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
++
++	core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
++	core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
++
++	DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32);
++	DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32);
++
++	DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
++	DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
++	DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
++	DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
++	DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
++	DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
++	DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
++
++	DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
++	DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
++
++	/*
++	 * Set the SRP sucess bit for FS-I2c
++	 */
++	core_if->srp_success = 0;
++	core_if->srp_timer_started = 0;
++
++
++	/*
++	 * Create new workqueue and init works
++	 */
++	core_if->wq_otg = create_singlethread_workqueue("dwc_otg");
++	if(core_if->wq_otg == 0) {
++		DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n");
++		kfree(host_if);
++		kfree(dev_if);
++		kfree(core_if);
++		return 0 * HZ;
++	}
++
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++
++	INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if);
++	INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if);
++
++#else
++
++	INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
++	INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
++
++#endif
++	return core_if;
++}
++
++/**
++ * This function frees the structures allocated by dwc_otg_cil_init().
++ *
++ * @param[in] core_if The core interface pointer returned from
++ * dwc_otg_cil_init().
++ *
++ */
++void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if)
++{
++	/* Disable all interrupts */
++	dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0);
++	dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0);
++
++	if (core_if->wq_otg) {
++		destroy_workqueue(core_if->wq_otg);
++	}
++	if (core_if->dev_if) {
++		kfree(core_if->dev_if);
++	}
++	if (core_if->host_if) {
++		kfree(core_if->host_if);
++	}
++	kfree(core_if);
++}
++
++/**
++ * This function enables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if)
++{
++	gahbcfg_data_t ahbcfg = { .d32 = 0};
++	ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++	dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++
++/**
++ * This function disables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if)
++{
++	gahbcfg_data_t ahbcfg = { .d32 = 0};
++	ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++	dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++/**
++ * This function initializes the commmon interrupts, used in both
++ * device and host modes.
++ *
++ * @param[in] core_if Programming view of the DWC_otg controller
++ *
++ */
++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs =
++			core_if->core_global_regs;
++	gintmsk_data_t intr_mask = { .d32 = 0};
++
++	/* Clear any pending OTG Interrupts */
++	dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF);
++
++	/* Clear any pending interrupts */
++	dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/*
++	 * Enable the interrupts in the GINTMSK.
++	 */
++	intr_mask.b.modemismatch = 1;
++	intr_mask.b.otgintr = 1;
++
++	if (!core_if->dma_enable) {
++		intr_mask.b.rxstsqlvl = 1;
++	}
++
++	intr_mask.b.conidstschng = 1;
++	intr_mask.b.wkupintr = 1;
++	intr_mask.b.disconnect = 1;
++	intr_mask.b.usbsuspend = 1;
++	intr_mask.b.sessreqintr = 1;
++	dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32);
++}
++
++/**
++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
++ * type.
++ */
++static void init_fslspclksel(dwc_otg_core_if_t *core_if)
++{
++	uint32_t	val;
++	hcfg_data_t		hcfg;
++
++	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++		 (core_if->hwcfg2.b.fs_phy_type == 1) &&
++		 (core_if->core_params->ulpi_fs_ls)) ||
++		(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* Full speed PHY */
++		val = DWC_HCFG_48_MHZ;
++	}
++	else {
++		/* High speed PHY running at full speed or high speed */
++		val = DWC_HCFG_30_60_MHZ;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
++	hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
++	hcfg.b.fslspclksel = val;
++	dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/**
++ * Initializes the DevSpd field of the DCFG register depending on the PHY type
++ * and the enumeration speed of the device.
++ */
++static void init_devspd(dwc_otg_core_if_t *core_if)
++{
++	uint32_t	val;
++	dcfg_data_t		dcfg;
++
++	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++		 (core_if->hwcfg2.b.fs_phy_type == 1) &&
++		 (core_if->core_params->ulpi_fs_ls)) ||
++		(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* Full speed PHY */
++		val = 0x3;
++	}
++	else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		/* High speed PHY running at full speed */
++		val = 0x1;
++	}
++	else {
++		/* High speed PHY running at high speed */
++		val = 0x0;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++
++	dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++/**
++ * This function calculates the number of IN EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if)
++{
++	uint32_t num_in_eps = 0;
++	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
++	uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
++	int i;
++
++
++	for(i = 0; i < num_eps; ++i)
++	{
++		if(!(hwcfg1 & 0x1))
++			num_in_eps++;
++
++		hwcfg1 >>= 2;
++	}
++
++	if(core_if->hwcfg4.b.ded_fifo_en) {
++		num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
++	}
++
++	return num_in_eps;
++}
++
++
++/**
++ * This function calculates the number of OUT EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if)
++{
++	uint32_t num_out_eps = 0;
++	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
++	int i;
++
++	for(i = 0; i < num_eps; ++i)
++	{
++		if(!(hwcfg1 & 0x2))
++			num_out_eps++;
++
++		hwcfg1 >>= 2;
++	}
++	return num_out_eps;
++}
++/**
++ * This function initializes the DWC_otg controller registers and
++ * prepares the core for device mode or host mode operation.
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ *
++ */
++void dwc_otg_core_init(dwc_otg_core_if_t *core_if)
++{
++	int i = 0;
++	dwc_otg_core_global_regs_t *global_regs =
++			core_if->core_global_regs;
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	gahbcfg_data_t ahbcfg = { .d32 = 0 };
++	gusbcfg_data_t usbcfg = { .d32 = 0 };
++	gi2cctl_data_t i2cctl = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if);
++
++	/* Common Initialization */
++
++	usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++
++//	usbcfg.b.tx_end_delay = 1;
++	/* Program the ULPI External VBUS bit if needed */
++	usbcfg.b.ulpi_ext_vbus_drv =
++		(core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
++
++	/* Set external TS Dline pulsing */
++	usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0;
++	dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++
++	/* Reset the Controller */
++	dwc_otg_core_reset(core_if);
++
++	/* Initialize parameters from Hardware configuration registers. */
++	dev_if->num_in_eps = calc_num_in_eps(core_if);
++	dev_if->num_out_eps = calc_num_out_eps(core_if);
++
++
++	DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep);
++
++	for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++	{
++		dev_if->perio_tx_fifo_size[i] =
++			dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
++				i, dev_if->perio_tx_fifo_size[i]);
++	}
++
++	for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++)
++	{
++		dev_if->tx_fifo_size[i] =
++			dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
++			i, dev_if->perio_tx_fifo_size[i]);
++	}
++
++	core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
++	core_if->rx_fifo_size =
++			dwc_read_reg32(&global_regs->grxfsiz);
++	core_if->nperio_tx_fifo_size =
++			dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
++
++	DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
++	DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
++	DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size);
++
++	/* This programming sequence needs to happen in FS mode before any other
++	 * programming occurs */
++	if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
++		(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++			/* If FS mode with FS PHY */
++
++			/* core_init() is now called on every switch so only call the
++			 * following for the first time through. */
++			if (!core_if->phy_init_done) {
++				core_if->phy_init_done = 1;
++				DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
++				usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++				usbcfg.b.physel = 1;
++				dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++				/* Reset after a PHY select */
++				dwc_otg_core_reset(core_if);
++			}
++
++			/* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.	Also
++			 * do this on HNP Dev/Host mode switches (done in dev_init and
++			 * host_init). */
++			if (dwc_otg_is_host_mode(core_if)) {
++				init_fslspclksel(core_if);
++			}
++			else {
++				init_devspd(core_if);
++			}
++
++			if (core_if->core_params->i2c_enable) {
++				DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
++				/* Program GUSBCFG.OtgUtmifsSel to I2C */
++				usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++				usbcfg.b.otgutmifssel = 1;
++				dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++				/* Program GI2CCTL.I2CEn */
++				i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
++				i2cctl.b.i2cdevaddr = 1;
++				i2cctl.b.i2cen = 0;
++				dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++				i2cctl.b.i2cen = 1;
++				dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++			}
++
++		} /* endif speed == DWC_SPEED_PARAM_FULL */
++
++		else {
++			/* High speed PHY. */
++			if (!core_if->phy_init_done) {
++				core_if->phy_init_done = 1;
++				/* HS PHY parameters.  These parameters are preserved
++				 * during soft reset so only program the first time.  Do
++				 * a soft reset immediately after setting phyif.  */
++				usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type;
++				if (usbcfg.b.ulpi_utmi_sel == 1) {
++					/* ULPI interface */
++					usbcfg.b.phyif = 0;
++					usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr;
++				}
++				else {
++					/* UTMI+ interface */
++					if (core_if->core_params->phy_utmi_width == 16) {
++						usbcfg.b.phyif = 1;
++				}
++				else {
++					usbcfg.b.phyif = 0;
++				}
++			}
++
++			dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++
++			/* Reset after setting the PHY parameters */
++			dwc_otg_core_reset(core_if);
++		}
++	}
++
++	if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
++		(core_if->hwcfg2.b.fs_phy_type == 1) &&
++		(core_if->core_params->ulpi_fs_ls)) {
++		DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
++		usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++		usbcfg.b.ulpi_fsls = 1;
++		usbcfg.b.ulpi_clk_sus_m = 1;
++		dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++	}
++	else {
++		usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++		usbcfg.b.ulpi_fsls = 0;
++		usbcfg.b.ulpi_clk_sus_m = 0;
++		dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++	}
++
++	/* Program the GAHBCFG Register.*/
++	switch (core_if->hwcfg2.b.architecture) {
++
++	case DWC_SLAVE_ONLY_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
++		ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++		ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++		core_if->dma_enable = 0;
++		core_if->dma_desc_enable = 0;
++		break;
++
++	case DWC_EXT_DMA_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
++		ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size;
++		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++		core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
++		break;
++
++	case DWC_INT_DMA_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
++		ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
++		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++		core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
++		break;
++
++	}
++	ahbcfg.b.dmaenable = core_if->dma_enable;
++	dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
++
++	core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
++
++	core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
++	core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
++	DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled"));
++	DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled"));
++
++	/*
++	 * Program the GUSBCFG register.
++	 */
++	usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++
++	switch (core_if->hwcfg2.b.op_mode) {
++	case DWC_MODE_HNP_SRP_CAPABLE:
++		usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
++		   DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++		   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_SRP_ONLY_CAPABLE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++		   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_HNP_SRP_CAPABLE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++
++	case DWC_MODE_SRP_CAPABLE_DEVICE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++		DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++
++	case DWC_MODE_SRP_CAPABLE_HOST:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++		DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_SRP_CAPABLE_HOST:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++	}
++
++	dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++
++	/* Enable common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/* Do device or host intialization based on mode during PCD
++	 * and HCD initialization  */
++	if (dwc_otg_is_host_mode(core_if)) {
++		DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
++		core_if->op_state = A_HOST;
++	}
++	else {
++		DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
++		core_if->op_state = B_PERIPHERAL;
++#ifdef DWC_DEVICE_ONLY
++		dwc_otg_core_dev_init(core_if);
++#endif
++	}
++}
++
++
++/**
++ * This function enables the Device mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if)
++{
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	dwc_otg_core_global_regs_t *global_regs =
++		core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++	/* Disable all interrupts. */
++	dwc_write_reg32(&global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts */
++	dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/* Enable interrupts */
++	intr_mask.b.usbreset = 1;
++	intr_mask.b.enumdone = 1;
++
++	if(!core_if->multiproc_int_enable) {
++		intr_mask.b.inepintr = 1;
++		intr_mask.b.outepintr = 1;
++	}
++
++	intr_mask.b.erlysuspend = 1;
++
++	if(core_if->en_multiple_tx_fifo == 0) {
++		intr_mask.b.epmismatch = 1;
++	}
++
++
++#ifdef DWC_EN_ISOC
++	if(core_if->dma_enable) {
++		if(core_if->dma_desc_enable == 0) {
++			if(core_if->pti_enh_enable) {
++				dctl_data_t dctl = { .d32 = 0 };
++				dctl.b.ifrmnum = 1;
++				dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++			} else {
++				intr_mask.b.incomplisoin = 1;
++				intr_mask.b.incomplisoout = 1;
++			}
++		}
++	} else {
++		intr_mask.b.incomplisoin = 1;
++		intr_mask.b.incomplisoout = 1;
++	}
++#endif // DWC_EN_ISOC
++
++/** @todo NGS: Should this be a module parameter? */
++#ifdef USE_PERIODIC_EP
++	intr_mask.b.isooutdrop = 1;
++	intr_mask.b.eopframe = 1;
++	intr_mask.b.incomplisoin = 1;
++	intr_mask.b.incomplisoout = 1;
++#endif
++
++	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++
++	DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
++		dwc_read_reg32(&global_regs->gintmsk));
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * device mode.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if)
++{
++	int i;
++	dwc_otg_core_global_regs_t *global_regs =
++		core_if->core_global_regs;
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	dcfg_data_t dcfg = { .d32 = 0};
++	grstctl_t resetctl = { .d32 = 0 };
++	uint32_t rx_fifo_size;
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t txfifosize;
++	dthrctl_data_t dthrctl;
++	fifosize_data_t ptxfifosize;
++
++	/* Restart the Phy Clock */
++	dwc_write_reg32(core_if->pcgcctl, 0);
++
++	/* Device configuration register */
++	init_devspd(core_if);
++	dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
++	dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
++	dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
++
++	dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
++						dwc_read_reg32(&global_regs->grxfsiz));
++
++		rx_fifo_size = params->dev_rx_fifo_size;
++		dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size);
++
++		DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
++			dwc_read_reg32(&global_regs->grxfsiz));
++
++		/** Set Periodic Tx FIFO Mask all bits 0 */
++		core_if->p_tx_msk = 0;
++
++		/** Set Tx FIFO Mask all bits 0 */
++		core_if->tx_msk = 0;
++
++		if(core_if->en_multiple_tx_fifo == 0) {
++			/* Non-periodic Tx FIFO */
++			DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++						   dwc_read_reg32(&global_regs->gnptxfsiz));
++
++			nptxfifosize.b.depth  = params->dev_nperio_tx_fifo_size;
++			nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++			dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++
++			DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++						   dwc_read_reg32(&global_regs->gnptxfsiz));
++
++			/**@todo NGS: Fix Periodic FIFO Sizing! */
++			/*
++			 * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
++			 * Indexes of the FIFO size module parameters in the
++			 * dev_perio_tx_fifo_size array and the FIFO size registers in
++			 * the dptxfsiz array run from 0 to 14.
++			 */
++			/** @todo Finish debug of this */
++			ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++			for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++			{
++				ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i];
++				DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
++							dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++				dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],
++								 ptxfifosize.d32);
++				DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
++							dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++				ptxfifosize.b.startaddr += ptxfifosize.b.depth;
++			}
++		}
++		else {
++			/*
++			 * Tx FIFOs These FIFOs are numbered from 1 to 15.
++			 * Indexes of the FIFO size module parameters in the
++			 * dev_tx_fifo_size array and the FIFO size registers in
++			 * the dptxfsiz_dieptxf array run from 0 to 14.
++			 */
++
++
++			/* Non-periodic Tx FIFO */
++			DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++							dwc_read_reg32(&global_regs->gnptxfsiz));
++
++			nptxfifosize.b.depth  = params->dev_nperio_tx_fifo_size;
++			nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++			dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++
++			DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++							dwc_read_reg32(&global_regs->gnptxfsiz));
++
++			txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++			/*
++			     Modify by kaiker ,for RT3052 device mode config
++
++			     In RT3052,Since the _core_if->hwcfg4.b.num_dev_perio_in_ep is
++			     configed to 0 so these TX_FIF0 not config.IN EP will can't
++			     more than 1 if not modify it.
++
++			*/
++#if 1
++			for (i=1 ; i <= dev_if->num_in_eps; i++)
++#else
++			for (i=1; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++#endif
++			{
++
++				txfifosize.b.depth = params->dev_tx_fifo_size[i];
++
++				DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
++					dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++
++				dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i-1],
++					txfifosize.d32);
++
++				DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
++					dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1]));
++
++				txfifosize.b.startaddr += txfifosize.b.depth;
++			}
++		}
++	}
++	/* Flush the FIFOs */
++	dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
++	dwc_otg_flush_rx_fifo(core_if);
++
++	/* Flush the Learning Queue. */
++	resetctl.b.intknqflsh = 1;
++	dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++	/* Clear all pending Device Interrupts */
++
++	if(core_if->multiproc_int_enable) {
++	}
++
++	/** @todo - if the condition needed to be checked
++	 *  or in any case all pending interrutps should be cleared?
++         */
++	if(core_if->multiproc_int_enable) {
++		for(i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		        dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0);
++		}
++
++		for(i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++		        dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0);
++		}
++
++		dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
++		dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0);
++	} else {
++                dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0);
++                dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0);
++                dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
++                dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0);
++	}
++
++	for (i=0; i <= dev_if->num_in_eps; i++)
++	{
++		depctl_data_t depctl;
++		depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		}
++		else {
++			depctl.d32 = 0;
++		}
++
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++
++
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
++	}
++
++	for (i=0; i <= dev_if->num_out_eps; i++)
++	{
++		depctl_data_t depctl;
++		depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		}
++		else {
++			depctl.d32 = 0;
++		}
++
++		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++
++		dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
++		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0);
++		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
++	}
++
++	if(core_if->en_multiple_tx_fifo && core_if->dma_enable) {
++		dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
++		dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
++		dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
++
++		dev_if->rx_thr_length = params->rx_thr_length;
++		dev_if->tx_thr_length = params->tx_thr_length;
++
++		dev_if->setup_desc_index = 0;
++
++		dthrctl.d32 = 0;
++		dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
++		dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
++		dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
++		dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
++		dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
++
++		dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32);
++
++		DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
++			dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len);
++
++	}
++
++	dwc_otg_enable_device_interrupts(core_if);
++
++	{
++		diepmsk_data_t msk = { .d32 = 0 };
++		msk.b.txfifoundrn = 1;
++	        if(core_if->multiproc_int_enable) {
++			dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32);
++	        } else {
++			dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32);
++	        }
++	}
++
++
++	if(core_if->multiproc_int_enable) {
++		/* Set NAK on Babble */
++		dctl_data_t dctl = { .d32 = 0};
++		dctl.b.nakonbble = 1;
++		dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	}
++}
++
++/**
++ * This function enables the Host mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++	/* Disable all interrupts. */
++	dwc_write_reg32(&global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts. */
++	dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/*
++	 * Enable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++
++	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++}
++
++/**
++ * This function disables the Host Mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs =
++	core_if->core_global_regs;
++	gintmsk_data_t intr_mask = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++
++	/*
++	 * Disable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++	intr_mask.b.ptxfempty = 1;
++	intr_mask.b.nptxfempty = 1;
++
++	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * host mode.
++ *
++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ * request queues. Host channels are reset to ensure that they are ready for
++ * performing transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_host_if_t	*host_if = core_if->host_if;
++	dwc_otg_core_params_t	*params = core_if->core_params;
++	hprt0_data_t		hprt0 = { .d32 = 0 };
++	fifosize_data_t		nptxfifosize;
++	fifosize_data_t		ptxfifosize;
++	int			i;
++	hcchar_data_t		hcchar;
++	hcfg_data_t		hcfg;
++	dwc_otg_hc_regs_t	*hc_regs;
++	int			num_channels;
++	gotgctl_data_t	gotgctl = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if);
++
++	/* Restart the Phy Clock */
++	dwc_write_reg32(core_if->pcgcctl, 0);
++
++	/* Initialize Host Configuration Register */
++	init_fslspclksel(core_if);
++	if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL)
++	{
++		hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++		hcfg.b.fslssupp = 1;
++		dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
++	}
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size);
++		DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++		dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++
++		/* Non-periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++		nptxfifosize.b.depth  = params->host_nperio_tx_fifo_size;
++		nptxfifosize.b.startaddr = params->host_rx_fifo_size;
++		dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++		DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++
++		/* Periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++		ptxfifosize.b.depth	 = params->host_perio_tx_fifo_size;
++		ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++		dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
++		DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++	}
++
++	/* Clear Host Set HNP Enable in the OTG Control Register */
++	gotgctl.b.hstsethnpen = 1;
++	dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);
++
++	/* Make sure the FIFOs are flushed. */
++	dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */);
++	dwc_otg_flush_rx_fifo(core_if);
++
++	/* Flush out any leftover queued requests. */
++	num_channels = core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++)
++	{
++		hc_regs = core_if->host_if->hc_regs[i];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcchar.b.chen = 0;
++		hcchar.b.chdis = 1;
++		hcchar.b.epdir = 0;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++	}
++
++	/* Halt all channels to put them into a known state. */
++	for (i = 0; i < num_channels; i++)
++	{
++		int count = 0;
++		hc_regs = core_if->host_if->hc_regs[i];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 1;
++		hcchar.b.epdir = 0;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
++		do {
++			hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++			if (++count > 1000)
++			{
++				DWC_ERROR("%s: Unable to clear halt on channel %d\n",
++					  __func__, i);
++				break;
++			}
++		}
++		while (hcchar.b.chen);
++	}
++
++	/* Turn on the vbus power. */
++	DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state);
++	if (core_if->op_state == A_HOST) {
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++		if (hprt0.b.prtpwr == 0) {
++			hprt0.b.prtpwr = 1;
++			dwc_write_reg32(host_if->hprt0, hprt0.d32);
++		}
++	}
++
++	dwc_otg_enable_host_interrupts(core_if);
++}
++
++/**
++ * Prepares a host channel for transferring packets to/from a specific
++ * endpoint. The HCCHARn register is set up with the characteristics specified
++ * in _hc. Host channel interrupts that may need to be serviced while this
++ * transfer is in progress are enabled.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ * @param hc Information needed to initialize the host channel
++ */
++void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	uint32_t intr_enable;
++	hcintmsk_data_t hc_intr_mask;
++	gintmsk_data_t gintmsk = { .d32 = 0 };
++	hcchar_data_t hcchar;
++	hcsplt_data_t hcsplt;
++
++	uint8_t hc_num = hc->hc_num;
++	dwc_otg_host_if_t *host_if = core_if->host_if;
++	dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
++
++	/* Clear old interrupt conditions for this host channel. */
++	hc_intr_mask.d32 = 0xFFFFFFFF;
++	hc_intr_mask.b.reserved = 0;
++	dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
++
++	/* Enable channel interrupts required for this transfer. */
++	hc_intr_mask.d32 = 0;
++	hc_intr_mask.b.chhltd = 1;
++	if (core_if->dma_enable) {
++		hc_intr_mask.b.ahberr = 1;
++		if (hc->error_state && !hc->do_split &&
++			hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++			hc_intr_mask.b.ack = 1;
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.datatglerr = 1;
++				if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++					hc_intr_mask.b.nak = 1;
++				}
++			}
++		}
++	}
++	else {
++		switch (hc->ep_type) {
++		case DWC_OTG_EP_TYPE_CONTROL:
++		case DWC_OTG_EP_TYPE_BULK:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			}
++			else {
++				hc_intr_mask.b.nak = 1;
++				hc_intr_mask.b.nyet = 1;
++				if (hc->do_ping) {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (hc->do_split) {
++				hc_intr_mask.b.nak = 1;
++				if (hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				}
++				else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			break;
++		case DWC_OTG_EP_TYPE_INTR:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.nak = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			hc_intr_mask.b.frmovrun = 1;
++
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			}
++			if (hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			if (hc->do_split) {
++				if (hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				}
++				else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++			break;
++		case DWC_OTG_EP_TYPE_ISOC:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.frmovrun = 1;
++			hc_intr_mask.b.ack = 1;
++
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.xacterr = 1;
++				hc_intr_mask.b.bblerr = 1;
++			}
++			break;
++		}
++	}
++	dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++//	if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in)
++//			hc->max_packet = 512;
++	/* Enable the top level host channel interrupt. */
++	intr_enable = (1 << hc_num);
++	dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
++
++	/* Make sure host channel interrupts are enabled. */
++	gintmsk.b.hcintr = 1;
++	dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
++
++	/*
++	 * Program the HCCHARn register with the endpoint characteristics for
++	 * the current transfer.
++	 */
++	hcchar.d32 = 0;
++	hcchar.b.devaddr = hc->dev_addr;
++	hcchar.b.epnum = hc->ep_num;
++	hcchar.b.epdir = hc->ep_is_in;
++	hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
++	hcchar.b.eptype = hc->ep_type;
++	hcchar.b.mps = hc->max_packet;
++
++	dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 Dev Addr: %d\n", hcchar.b.devaddr);
++	DWC_DEBUGPL(DBG_HCDV, "	 Ep Num: %d\n", hcchar.b.epnum);
++	DWC_DEBUGPL(DBG_HCDV, "	 Is In: %d\n", hcchar.b.epdir);
++	DWC_DEBUGPL(DBG_HCDV, "	 Is Low Speed: %d\n", hcchar.b.lspddev);
++	DWC_DEBUGPL(DBG_HCDV, "	 Ep Type: %d\n", hcchar.b.eptype);
++	DWC_DEBUGPL(DBG_HCDV, "	 Max Pkt: %d\n", hcchar.b.mps);
++	DWC_DEBUGPL(DBG_HCDV, "	 Multi Cnt: %d\n", hcchar.b.multicnt);
++
++	/*
++	 * Program the HCSPLIT register for SPLITs
++	 */
++	hcsplt.d32 = 0;
++	if (hc->do_split) {
++		DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num,
++			   hc->complete_split ? "CSPLIT" : "SSPLIT");
++		hcsplt.b.compsplt = hc->complete_split;
++		hcsplt.b.xactpos = hc->xact_pos;
++		hcsplt.b.hubaddr = hc->hub_addr;
++		hcsplt.b.prtaddr = hc->port_addr;
++		DWC_DEBUGPL(DBG_HCDV, "	  comp split %d\n", hc->complete_split);
++		DWC_DEBUGPL(DBG_HCDV, "	  xact pos %d\n", hc->xact_pos);
++		DWC_DEBUGPL(DBG_HCDV, "	  hub addr %d\n", hc->hub_addr);
++		DWC_DEBUGPL(DBG_HCDV, "	  port addr %d\n", hc->port_addr);
++		DWC_DEBUGPL(DBG_HCDV, "	  is_in %d\n", hc->ep_is_in);
++		DWC_DEBUGPL(DBG_HCDV, "	  Max Pkt: %d\n", hcchar.b.mps);
++		DWC_DEBUGPL(DBG_HCDV, "	  xferlen: %d\n", hc->xfer_len);
++	}
++	dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
++
++}
++
++/**
++ * Attempts to halt a host channel. This function should only be called in
++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++ * normal circumstances in DMA mode, the controller halts the channel when the
++ * transfer is complete or a condition occurs that requires application
++ * intervention.
++ *
++ * In slave mode, checks for a free request queue entry, then sets the Channel
++ * Enable and Channel Disable bits of the Host Channel Characteristics
++ * register of the specified channel to intiate the halt. If there is no free
++ * request queue entry, sets only the Channel Disable bit of the HCCHARn
++ * register to flush requests for this channel. In the latter case, sets a
++ * flag to indicate that the host channel needs to be halted when a request
++ * queue slot is open.
++ *
++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ * HCCHARn register. The controller ensures there is space in the request
++ * queue before submitting the halt request.
++ *
++ * Some time may elapse before the core flushes any posted requests for this
++ * host channel and halts. The Channel Halted interrupt handler completes the
++ * deactivation of the host channel.
++ *
++ * @param core_if Controller register interface.
++ * @param hc Host channel to halt.
++ * @param halt_status Reason for halting the channel.
++ */
++void dwc_otg_hc_halt(dwc_otg_core_if_t *core_if,
++			 dwc_hc_t *hc,
++			 dwc_otg_halt_status_e halt_status)
++{
++	gnptxsts_data_t			nptxsts;
++	hptxsts_data_t			hptxsts;
++	hcchar_data_t			hcchar;
++	dwc_otg_hc_regs_t		*hc_regs;
++	dwc_otg_core_global_regs_t	*global_regs;
++	dwc_otg_host_global_regs_t	*host_global_regs;
++
++	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	global_regs = core_if->core_global_regs;
++	host_global_regs = core_if->host_if->host_global_regs;
++
++	WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
++
++	if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++		halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Disable all channel interrupts except Ch Halted. The QTD
++		 * and QH state associated with this transfer has been cleared
++		 * (in the case of URB_DEQUEUE), so the channel needs to be
++		 * shut down carefully to prevent crashes.
++		 */
++		hcintmsk_data_t hcintmsk;
++		hcintmsk.d32 = 0;
++		hcintmsk.b.chhltd = 1;
++		dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
++
++		/*
++		 * Make sure no other interrupts besides halt are currently
++		 * pending. Handling another interrupt could cause a crash due
++		 * to the QTD and QH state.
++		 */
++		dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
++
++		/*
++		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++		 * even if the channel was already halted for some other
++		 * reason.
++		 */
++		hc->halt_status = halt_status;
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		if (hcchar.b.chen == 0) {
++			/*
++			 * The channel is either already halted or it hasn't
++			 * started yet. In DMA mode, the transfer may halt if
++			 * it finishes normally or a condition occurs that
++			 * requires driver intervention. Don't want to halt
++			 * the channel again. In either Slave or DMA mode,
++			 * it's possible that the transfer has been assigned
++			 * to a channel, but not started yet when an URB is
++			 * dequeued. Don't want to halt a channel that hasn't
++			 * started yet.
++			 */
++			return;
++		}
++	}
++
++	if (hc->halt_pending) {
++		/*
++		 * A halt has already been issued for this channel. This might
++		 * happen when a transfer is aborted by a higher level in
++		 * the stack.
++		 */
++#ifdef DEBUG
++		DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
++			  __func__, hc->hc_num);
++
++/*		dwc_otg_dump_global_registers(core_if); */
++/*		dwc_otg_dump_host_registers(core_if); */
++#endif
++		return;
++	}
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 1;
++
++	if (!core_if->dma_enable) {
++		/* Check for space in the request queue to issue the halt. */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++			hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++			if (nptxsts.b.nptxqspcavail == 0) {
++				hcchar.b.chen = 0;
++			}
++		}
++		else {
++			hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
++			if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) {
++				hcchar.b.chen = 0;
++			}
++		}
++	}
++
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->halt_status = halt_status;
++
++	if (hcchar.b.chen) {
++		hc->halt_pending = 1;
++		hc->halt_on_queue = 0;
++	}
++	else {
++		hc->halt_on_queue = 1;
++	}
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 hcchar: 0x%08x\n", hcchar.d32);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_pending: %d\n", hc->halt_pending);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_on_queue: %d\n", hc->halt_on_queue);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_status: %d\n", hc->halt_status);
++
++	return;
++}
++
++/**
++ * Clears the transfer state for a host channel. This function is normally
++ * called after a transfer is done and the host channel is being released.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to clean up.
++ */
++void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	dwc_otg_hc_regs_t *hc_regs;
++
++	hc->xfer_started = 0;
++
++	/*
++	 * Clear channel interrupt enables and any unhandled channel interrupt
++	 * conditions.
++	 */
++	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	dwc_write_reg32(&hc_regs->hcintmsk, 0);
++	dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
++
++#ifdef DEBUG
++	del_timer(&core_if->hc_xfer_timer[hc->hc_num]);
++	{
++		hcchar_data_t hcchar;
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		if (hcchar.b.chdis) {
++			DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++				 __func__, hc->hc_num, hcchar.d32);
++		}
++	}
++#endif
++}
++
++/**
++ * Sets the channel property that indicates in which frame a periodic transfer
++ * should occur. This is always set to the _next_ frame. This function has no
++ * effect on non-periodic transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to set up and its properties.
++ * @param hcchar Current value of the HCCHAR register for the specified host
++ * channel.
++ */
++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if,
++					 dwc_hc_t *hc,
++					 hcchar_data_t *hcchar)
++{
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		hfnum_data_t	hfnum;
++		hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum);
++
++		/* 1 if _next_ frame is odd, 0 if it's even */
++		hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++#ifdef DEBUG
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) {
++			switch (hfnum.b.frnum & 0x7) {
++			case 7:
++				core_if->hfnum_7_samples++;
++				core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
++				break;
++			case 0:
++				core_if->hfnum_0_samples++;
++				core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
++				break;
++			default:
++				core_if->hfnum_other_samples++;
++				core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
++				break;
++			}
++		}
++#endif
++	}
++}
++
++#ifdef DEBUG
++static void hc_xfer_timeout(unsigned long ptr)
++{
++	hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr;
++	int hc_num = xfer_info->hc->hc_num;
++	DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++	DWC_WARN("	start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
++}
++#endif
++
++/*
++ * This function does the setup for a data transfer for a host channel and
++ * starts the transfer. May be called in either Slave mode or DMA mode. In
++ * Slave mode, the caller must ensure that there is sufficient space in the
++ * request queue and Tx Data FIFO.
++ *
++ * For an OUT transfer in Slave mode, it loads a data packet into the
++ * appropriate FIFO. If necessary, additional data packets will be loaded in
++ * the Host ISR.
++ *
++ * For an IN transfer in Slave mode, a data packet is requested. The data
++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++ * additional data packets are requested in the Host ISR.
++ *
++ * For a PING transfer in Slave mode, the Do Ping bit is set in the egards,
++ *
++ * Steven
++ *
++ * register along with a packet count of 1 and the channel is enabled. This
++ * causes a single PING transaction to occur. Other fields in HCTSIZ are
++ * simply set to 0 since no data transfer occurs in this case.
++ *
++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ * all the information required to perform the subsequent data transfer. In
++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ * controller performs the entire PING protocol, then starts the data
++ * transfer.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Information needed to initialize the host channel. The xfer_len
++ * value may be reduced to accommodate the max widths of the XferSize and
++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ * to reflect the final xfer_len value.
++ */
++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	uint16_t num_packets;
++	uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
++	uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++	hctsiz.d32 = 0;
++
++	if (hc->do_ping) {
++		if (!core_if->dma_enable) {
++			dwc_otg_hc_do_ping(core_if, hc);
++			hc->xfer_started = 1;
++			return;
++		}
++		else {
++			hctsiz.b.dopng = 1;
++		}
++	}
++
++	if (hc->do_split) {
++		num_packets = 1;
++
++		if (hc->complete_split && !hc->ep_is_in) {
++			/* For CSPLIT OUT Transfer, set the size to 0 so the
++			 * core doesn't expect any data written to the FIFO */
++			hc->xfer_len = 0;
++		}
++		else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
++			hc->xfer_len = hc->max_packet;
++		}
++		else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
++			hc->xfer_len = 188;
++		}
++
++		hctsiz.b.xfersize = hc->xfer_len;
++	}
++	else {
++		/*
++		 * Ensure that the transfer length and packet count will fit
++		 * in the widths allocated for them in the HCTSIZn register.
++		 */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure the transfer size is no larger than one
++			 * (micro)frame's worth of data. (A check was done
++			 * when the periodic transfer was accepted to ensure
++			 * that a (micro)frame's worth of data can be
++			 * programmed into a channel.)
++			 */
++			uint32_t max_periodic_len = hc->multi_count * hc->max_packet;
++			if (hc->xfer_len > max_periodic_len) {
++				hc->xfer_len = max_periodic_len;
++			}
++			else {
++			}
++
++		}
++		else if (hc->xfer_len > max_hc_xfer_size) {
++			/* Make sure that xfer_len is a multiple of max packet size. */
++			hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
++		}
++
++		if (hc->xfer_len > 0) {
++			num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
++			if (num_packets > max_hc_pkt_count) {
++				num_packets = max_hc_pkt_count;
++				hc->xfer_len = num_packets * hc->max_packet;
++			}
++		}
++		else {
++			/* Need 1 packet for transfer length of 0. */
++			num_packets = 1;
++		}
++
++		if (hc->ep_is_in) {
++			/* Always program an integral # of max packets for IN transfers. */
++			hc->xfer_len = num_packets * hc->max_packet;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure that the multi_count field matches the
++			 * actual transfer length.
++			 */
++			hc->multi_count = num_packets;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/* Set up the initial PID for the transfer. */
++			if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++				if (hc->ep_is_in) {
++					if (hc->multi_count == 1) {
++						hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++					}
++					else if (hc->multi_count == 2) {
++						hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++					}
++					else {
++						hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
++					}
++				}
++				else {
++					if (hc->multi_count == 1) {
++						hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++					}
++					else {
++						hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
++					}
++				}
++			}
++			else {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++			}
++		}
++
++		hctsiz.b.xfersize = hc->xfer_len;
++	}
++
++	hc->start_pkt_count = num_packets;
++	hctsiz.b.pktcnt = num_packets;
++	hctsiz.b.pid = hc->data_pid_start;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 Xfer Size: %d\n", hctsiz.b.xfersize);
++	DWC_DEBUGPL(DBG_HCDV, "	 Num Pkts: %d\n", hctsiz.b.pktcnt);
++	DWC_DEBUGPL(DBG_HCDV, "	 Start PID: %d\n", hctsiz.b.pid);
++
++	if (core_if->dma_enable) {
++#if defined (CONFIG_DWC_OTG_HOST_ONLY)
++		if ((uint32_t)hc->xfer_buff & 0x3) {
++			/* non DWORD-aligned buffer case*/
++			if(!hc->qh->dw_align_buf) {
++				hc->qh->dw_align_buf =
++					dma_alloc_coherent(NULL,
++					   		   core_if->core_params->max_transfer_size,
++					   		   &hc->qh->dw_align_buf_dma,
++					   		   GFP_ATOMIC | GFP_DMA);
++				if (!hc->qh->dw_align_buf) {
++
++					DWC_ERROR("%s: Failed to allocate memory to handle "
++						  "non-dword aligned buffer case\n", __func__);
++					return;
++				}
++
++			}
++			if (!hc->ep_is_in) {
++			    memcpy(hc->qh->dw_align_buf, phys_to_virt((uint32_t)hc->xfer_buff), hc->xfer_len);
++			}
++
++			dwc_write_reg32(&hc_regs->hcdma, hc->qh->dw_align_buf_dma);
++		}
++		else
++#endif
++		    dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff);
++	}
++
++	/* Start the split */
++	if (hc->do_split) {
++		hcsplt_data_t hcsplt;
++		hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
++		hcsplt.b.spltena = 1;
++		dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
++	}
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.multicnt = hc->multi_count;
++	hc_set_even_odd_frame(core_if, hc, &hcchar);
++#ifdef DEBUG
++	core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++			 __func__, hc->hc_num, hcchar.d32);
++	}
++#endif
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->xfer_started = 1;
++	hc->requests++;
++
++	if (!core_if->dma_enable &&
++		!hc->ep_is_in && hc->xfer_len > 0) {
++		/* Load OUT packet into the appropriate Tx FIFO. */
++		dwc_otg_hc_write_packet(core_if, hc);
++	}
++
++#ifdef DEBUG
++	/* Start a timer for this transfer. */
++	core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout;
++	core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
++	core_if->hc_xfer_info[hc->hc_num].hc = hc;
++	core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]);
++	core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10);
++	add_timer(&core_if->hc_xfer_timer[hc->hc_num]);
++#endif
++}
++
++/**
++ * This function continues a data transfer that was started by previous call
++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
++ * sufficient space in the request queue and Tx Data FIFO. This function
++ * should only be called in Slave mode. In DMA mode, the controller acts
++ * autonomously to complete transfers programmed to a host channel.
++ *
++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
++ * if there is any data remaining to be queued. For an IN transfer, another
++ * data packet is always requested. For the SETUP phase of a control transfer,
++ * this function does nothing.
++ *
++ * @return 1 if a new request is queued, 0 if no more requests are required
++ * for this transfer.
++ */
++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++	if (hc->do_split) {
++		/* SPLITs always queue just once per channel */
++		return 0;
++	}
++	else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		/* SETUPs are queued only once since they can't be NAKed. */
++		return 0;
++	}
++	else if (hc->ep_is_in) {
++		/*
++		 * Always queue another request for other IN transfers. If
++		 * back-to-back INs are issued and NAKs are received for both,
++		 * the driver may still be processing the first NAK when the
++		 * second NAK is received. When the interrupt handler clears
++		 * the NAK interrupt for the first NAK, the second NAK will
++		 * not be seen. So we can't depend on the NAK interrupt
++		 * handler to requeue a NAKed request. Instead, IN requests
++		 * are issued each time this function is called. When the
++		 * transfer completes, the extra requests for the channel will
++		 * be flushed.
++		 */
++		hcchar_data_t hcchar;
++		dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hc_set_even_odd_frame(core_if, hc, &hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 0;
++		DWC_DEBUGPL(DBG_HCDV, "	 IN xfer: hcchar = 0x%08x\n", hcchar.d32);
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		hc->requests++;
++		return 1;
++	}
++	else {
++		/* OUT transfers. */
++		if (hc->xfer_count < hc->xfer_len) {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++				hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				hcchar_data_t hcchar;
++				dwc_otg_hc_regs_t *hc_regs;
++				hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++				hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++				hc_set_even_odd_frame(core_if, hc, &hcchar);
++			}
++
++			/* Load OUT packet into the appropriate Tx FIFO. */
++			dwc_otg_hc_write_packet(core_if, hc);
++			hc->requests++;
++			return 1;
++		}
++		else {
++			return 0;
++		}
++	}
++}
++
++/**
++ * Starts a PING transfer. This function should only be called in Slave mode.
++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
++ */
++void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++	hctsiz.d32 = 0;
++	hctsiz.b.dopng = 1;
++	hctsiz.b.pktcnt = 1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*
++ * This function writes a packet into the Tx FIFO associated with the Host
++ * Channel. For a channel associated with a non-periodic EP, the non-periodic
++ * Tx FIFO is written. For a channel associated with a periodic EP, the
++ * periodic Tx FIFO is written. This function should only be called in Slave
++ * mode.
++ *
++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++ * then number of bytes written to the Tx FIFO.
++ */
++void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	uint32_t i;
++	uint32_t remaining_count;
++	uint32_t byte_count;
++	uint32_t dword_count;
++
++	uint32_t *data_buff = (uint32_t *)(hc->xfer_buff);
++	uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
++
++	remaining_count = hc->xfer_len - hc->xfer_count;
++	if (remaining_count > hc->max_packet) {
++		byte_count = hc->max_packet;
++	}
++	else {
++		byte_count = remaining_count;
++	}
++
++	dword_count = (byte_count + 3) / 4;
++
++	if ((((unsigned long)data_buff) & 0x3) == 0) {
++		/* xfer_buff is DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++)
++		{
++			dwc_write_reg32(data_fifo, *data_buff);
++		}
++	}
++	else {
++		/* xfer_buff is not DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++)
++		{
++			dwc_write_reg32(data_fifo, get_unaligned(data_buff));
++		}
++	}
++
++	hc->xfer_count += byte_count;
++	hc->xfer_buff += byte_count;
++}
++
++/**
++ * Gets the current USB frame number. This is the frame number from the last
++ * SOF packet.
++ */
++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if)
++{
++	dsts_data_t dsts;
++	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++	/* read current frame/microframe number from DSTS register */
++	return dsts.b.soffn;
++}
++
++/**
++ * This function reads a setup packet from the Rx FIFO into the destination
++ * buffer.	This function is called from the Rx Status Queue Level (RxStsQLvl)
++ * Interrupt routine when a SETUP packet has been received in Slave mode.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest Destination buffer for packet data.
++ */
++void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest)
++{
++	/* Get the 8 bytes of a setup transaction data */
++
++	/* Pop 2 DWORDS off the receive data FIFO into memory */
++	dest[0] = dwc_read_reg32(core_if->data_fifo[0]);
++	dest[1] = dwc_read_reg32(core_if->data_fifo[0]);
++}
++
++
++/**
++ * This function enables EP0 OUT to receive SETUP packets and configures EP0
++ * IN for transmitting packets.	 It is normally called when the
++ * "Enumeration Done" interrupt occurs.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dsts_data_t dsts;
++	depctl_data_t diepctl;
++	depctl_data_t doepctl;
++	dctl_data_t dctl = { .d32 = 0 };
++
++	/* Read the Device Status and Endpoint 0 Control registers */
++	dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
++	diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
++	doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
++
++	/* Set the MPS of the IN EP based on the enumeration speed */
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_64;
++		break;
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_8;
++		break;
++	}
++
++	dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++	/* Enable OUT EP for receive */
++	doepctl.b.epena = 1;
++	dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
++		dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++	DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
++		dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++	dctl.b.cgnpinnak = 1;
++
++	dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++	DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
++		dwc_read_reg32(&dev_if->dev_global_regs->dctl));
++}
++
++/**
++ * This function activates an EP.  The Device EP control register for
++ * the EP is configured as defined in the ep structure.	 Note: This
++ * function is not used for EP0.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to activate.
++ */
++void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	depctl_data_t depctl;
++	volatile uint32_t *addr;
++	daint_data_t daintmsk = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
++		(ep->is_in?"IN":"OUT"));
++
++	/* Read DEPCTLn register */
++	if (ep->is_in == 1) {
++		addr = &dev_if->in_ep_regs[ep->num]->diepctl;
++		daintmsk.ep.in = 1<<ep->num;
++	}
++	else {
++		addr = &dev_if->out_ep_regs[ep->num]->doepctl;
++		daintmsk.ep.out = 1<<ep->num;
++	}
++
++	/* If the EP is already active don't change the EP Control
++	 * register. */
++	depctl.d32 = dwc_read_reg32(addr);
++	if (!depctl.b.usbactep) {
++		depctl.b.mps = ep->maxpacket;
++		depctl.b.eptype = ep->type;
++		depctl.b.txfnum = ep->tx_fifo_num;
++
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			depctl.b.setd0pid = 1; // ???
++		}
++		else {
++			depctl.b.setd0pid = 1;
++		}
++		depctl.b.usbactep = 1;
++
++		dwc_write_reg32(addr, depctl.d32);
++		DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr));
++	}
++
++	/* Enable the Interrupt for this EP */
++	if(core_if->multiproc_int_enable) {
++		if (ep->is_in == 1) {
++			diepmsk_data_t diepmsk = { .d32 = 0};
++			diepmsk.b.xfercompl = 1;
++			diepmsk.b.timeout = 1;
++			diepmsk.b.epdisabled = 1;
++			diepmsk.b.ahberr = 1;
++			diepmsk.b.intknepmis = 1;
++			diepmsk.b.txfifoundrn = 1; //?????
++
++
++			if(core_if->dma_desc_enable) {
++				diepmsk.b.bna = 1;
++			}
++/*
++			if(core_if->dma_enable) {
++				doepmsk.b.nak = 1;
++			}
++*/
++			dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32);
++
++		} else {
++			doepmsk_data_t doepmsk = { .d32 = 0};
++			doepmsk.b.xfercompl = 1;
++			doepmsk.b.ahberr = 1;
++			doepmsk.b.epdisabled = 1;
++
++
++			if(core_if->dma_desc_enable) {
++				doepmsk.b.bna = 1;
++			}
++/*
++			doepmsk.b.babble = 1;
++			doepmsk.b.nyet = 1;
++			doepmsk.b.nak = 1;
++*/
++			dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32);
++		}
++		dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk,
++			 0, daintmsk.d32);
++	} else {
++		dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
++				 0, daintmsk.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
++		dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
++
++	ep->stall_clear_flag = 0;
++	return;
++}
++
++/**
++ * This function deactivates an EP. This is done by clearing the USB Active
++ * EP bit in the Device EP control register. Note: This function is not used
++ * for EP0. EP0 cannot be deactivated.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to deactivate.
++ */
++void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl = { .d32 = 0 };
++	volatile uint32_t *addr;
++	daint_data_t daintmsk = { .d32 = 0};
++
++	/* Read DEPCTLn register */
++	if (ep->is_in == 1) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++		daintmsk.ep.in = 1<<ep->num;
++	}
++	else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++		daintmsk.ep.out = 1<<ep->num;
++	}
++
++	depctl.b.usbactep = 0;
++
++	if(core_if->dma_desc_enable)
++		depctl.b.epdis = 1;
++
++	dwc_write_reg32(addr, depctl.d32);
++
++	/* Disable the Interrupt for this EP */
++	if(core_if->multiproc_int_enable) {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk,
++				 daintmsk.d32, 0);
++
++		if (ep->is_in == 1) {
++			dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0);
++		} else {
++			dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0);
++		}
++	} else {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk,
++					 daintmsk.d32, 0);
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer.	 For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	dwc_otg_dma_desc_t* dma_desc;
++	uint32_t offset;
++	uint32_t xfer_est;
++	int i;
++
++	ep->desc_cnt = ( ep->total_len / ep->maxxfer)  +
++		((ep->total_len % ep->maxxfer) ? 1 : 0);
++	if(!ep->desc_cnt)
++		ep->desc_cnt = 1;
++
++	dma_desc = ep->desc_addr;
++	xfer_est = ep->total_len;
++	offset = 0;
++	for( i = 0; i < ep->desc_cnt; ++i) {
++		/** DMA Descriptor Setup */
++		if(xfer_est > ep->maxxfer) {
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 0;
++			dma_desc->status.b.ioc = 0;
++			dma_desc->status.b.sp = 0;
++			dma_desc->status.b.bytes = ep->maxxfer;
++			dma_desc->buf = ep->dma_addr + offset;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			xfer_est -= ep->maxxfer;
++			offset += ep->maxxfer;
++		} else {
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			if(ep->is_in) {
++				dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ?
++					1 : ((ep->sent_zlp) ? 1 : 0);
++				dma_desc->status.b.bytes = xfer_est;
++			} else 	{
++				dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ;
++			}
++
++			dma_desc->buf = ep->dma_addr + offset;
++			dma_desc->status.b.bs = BS_HOST_READY;
++		}
++		dma_desc ++;
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer.	 For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t 	depctl;
++	deptsiz_data_t	deptsiz;
++	gintmsk_data_t 	intr_mask = { .d32 = 0};
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++
++	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++		"xfer_buff=%p start_xfer_buff=%p\n",
++		ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
++		ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++			core_if->dev_if->in_ep_regs[ep->num];
++
++		gnptxsts_data_t gtxstatus;
++
++		gtxstatus.d32 =
++			dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
++
++		if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++			DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
++#endif
++			return;
++		}
++
++		depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
++		deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
++
++		ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++				ep->maxxfer : (ep->total_len - ep->xfer_len);
++
++		/* Zero Length Packet? */
++		if ((ep->xfer_len - ep->xfer_count) == 0) {
++			deptsiz.b.xfersize = 0;
++			deptsiz.b.pktcnt = 1;
++		}
++		else {
++			/* Program the transfer size and packet count
++			 *	as follows: xfersize = N * maxpacket +
++			 *	short_packet pktcnt = N + (short_packet
++			 *	exist ? 1 : 0)
++			 */
++			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++			deptsiz.b.pktcnt =
++				(ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) /
++				ep->maxpacket;
++		}
++
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++				dwc_write_reg32 (&(in_regs->diepdma),
++						 (uint32_t)ep->dma_addr);
++			}
++			else {
++				init_dma_desc_chain(core_if, ep);
++				/** DIEPDMAn Register write */
++				dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++			if(ep->type != DWC_OTG_EP_TYPE_ISOC) {
++				/**
++				 * Enable the Non-Periodic Tx FIFO empty interrupt,
++				 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++				 * the data will be written into the fifo by the ISR.
++				 */
++				if(core_if->en_multiple_tx_fifo == 0) {
++					intr_mask.b.nptxfempty = 1;
++					dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++						intr_mask.d32, intr_mask.d32);
++				}
++				else {
++					/* Enable the Tx FIFO Empty Interrupt for this EP */
++					if(ep->xfer_len > 0) {
++						uint32_t fifoemptymsk = 0;
++						fifoemptymsk = 1 << ep->num;
++						dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						0, fifoemptymsk);
++
++					}
++				}
++			}
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++		depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
++		depctl.b.nextep = ep->num;
++		dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
++
++	}
++	else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		core_if->dev_if->out_ep_regs[ep->num];
++
++		depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
++		deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
++
++		ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++				ep->maxxfer : (ep->total_len - ep->xfer_len);
++
++		/* Program the transfer size and packet count as follows:
++		 *
++		 *	pktcnt = N
++		 *	xfersize = N * maxpacket
++		 */
++		if ((ep->xfer_len - ep->xfer_count) == 0) {
++			/* Zero Length Packet */
++			deptsiz.b.xfersize = ep->maxpacket;
++			deptsiz.b.pktcnt = 1;
++		}
++		else {
++			deptsiz.b.pktcnt =
++					(ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) /
++					ep->maxpacket;
++			ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
++			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++		}
++
++		DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
++			ep->num,
++			deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++				dwc_write_reg32 (&(out_regs->doepdma),
++					(uint32_t)ep->dma_addr);
++			}
++			else {
++				init_dma_desc_chain(core_if, ep);
++
++				/** DOEPDMAn Register write */
++				dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++		DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
++			dwc_read_reg32(&out_regs->doepctl),
++			dwc_read_reg32(&out_regs->doeptsiz));
++		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++			dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
++			dwc_read_reg32(&core_if->core_global_regs->gintmsk));
++	}
++}
++
++/**
++ * This function setup a zero length transfer in Buffer DMA and
++ * Slave modes for usb requests with zero field set
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++
++ 	depctl_data_t depctl;
++	deptsiz_data_t deptsiz;
++	gintmsk_data_t intr_mask = { .d32 = 0};
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++			core_if->dev_if->in_ep_regs[ep->num];
++
++		depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
++		deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
++
++		deptsiz.b.xfersize = 0;
++		deptsiz.b.pktcnt = 1;
++
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++				dwc_write_reg32 (&(in_regs->diepdma),
++						 (uint32_t)ep->dma_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++			/**
++			 * Enable the Non-Periodic Tx FIFO empty interrupt,
++			 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++			 * the data will be written into the fifo by the ISR.
++			 */
++			if(core_if->en_multiple_tx_fifo == 0) {
++				intr_mask.b.nptxfempty = 1;
++				dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++					intr_mask.d32, intr_mask.d32);
++			}
++			else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if(ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk = 1 << ep->num;
++					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++					0, fifoemptymsk);
++				}
++			}
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++		depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
++		depctl.b.nextep = ep->num;
++		dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
++
++	}
++	else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		core_if->dev_if->out_ep_regs[ep->num];
++
++		depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
++		deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
++
++		/* Zero Length Packet */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++				dwc_write_reg32 (&(out_regs->doepdma),
++					(uint32_t)ep->dma_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for EP0 and starts
++ * the transfer.  For an IN transfer, the packets will be loaded into
++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
++ * unloaded from the Rx FIFO in the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	dwc_otg_dma_desc_t* dma_desc;
++
++	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++	"xfer_buff=%p start_xfer_buff=%p \n",
++	ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
++	ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
++
++	ep->total_len = ep->xfer_len;
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		core_if->dev_if->in_ep_regs[0];
++
++		gnptxsts_data_t gtxstatus;
++
++		gtxstatus.d32 =
++			dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
++
++		if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++			deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++			DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
++				dwc_read_reg32(&in_regs->diepctl));
++			DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
++				deptsiz.d32,
++				deptsiz.b.xfersize, deptsiz.b.pktcnt);
++			DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n",
++				  gtxstatus.d32);
++#endif
++			return;
++		}
++
++
++		depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++		/* Zero Length Packet? */
++		if (ep->xfer_len == 0) {
++			deptsiz.b.xfersize = 0;
++			deptsiz.b.pktcnt = 1;
++		}
++		else {
++			/* Program the transfer size and packet count
++			 *	as follows: xfersize = N * maxpacket +
++			 *	short_packet pktcnt = N + (short_packet
++			 *	exist ? 1 : 0)
++			 */
++			if (ep->xfer_len > ep->maxpacket) {
++				ep->xfer_len = ep->maxpacket;
++				deptsiz.b.xfersize = ep->maxpacket;
++			}
++			else {
++				deptsiz.b.xfersize = ep->xfer_len;
++			}
++			deptsiz.b.pktcnt = 1;
++
++		}
++		DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			ep->xfer_len,
++			deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if(core_if->dma_desc_enable == 0) {
++				dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++
++				dwc_write_reg32 (&(in_regs->diepdma),
++				(uint32_t)ep->dma_addr);
++			}
++			else {
++				dma_desc = core_if->dev_if->in_desc_addr;
++
++				/** DMA Descriptor Setup */
++				dma_desc->status.b.bs = BS_HOST_BUSY;
++				dma_desc->status.b.l = 1;
++				dma_desc->status.b.ioc = 1;
++				dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++				dma_desc->status.b.bytes = ep->xfer_len;
++				dma_desc->buf = ep->dma_addr;
++				dma_desc->status.b.bs = BS_HOST_READY;
++
++				/** DIEPDMA0 Register write */
++				dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++		/**
++		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++		 * data will be written into the fifo by the ISR.
++		 */
++		if (!core_if->dma_enable) {
++			if(core_if->en_multiple_tx_fifo == 0) {
++				intr_mask.b.nptxfempty = 1;
++				dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++					intr_mask.d32, intr_mask.d32);
++			}
++			else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if(ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << ep->num;
++					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						0, fifoemptymsk);
++				}
++			}
++		}
++	}
++	else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++			core_if->dev_if->out_ep_regs[0];
++
++		depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++		deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count as follows:
++		 *	xfersize = N * (maxpacket + 4 - (maxpacket % 4))
++		 *	pktcnt = N											*/
++		/* Zero Length Packet */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++		DWC_DEBUGPL(DBG_PCDV, "len=%d  xfersize=%d pktcnt=%d\n",
++			ep->xfer_len,
++			deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (core_if->dma_enable) {
++			if(!core_if->dma_desc_enable) {
++				dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++				dwc_write_reg32 (&(out_regs->doepdma),
++				 (uint32_t)ep->dma_addr);
++			}
++			else {
++				dma_desc = core_if->dev_if->out_desc_addr;
++
++				/** DMA Descriptor Setup */
++				dma_desc->status.b.bs = BS_HOST_BUSY;
++				dma_desc->status.b.l = 1;
++				dma_desc->status.b.ioc = 1;
++				dma_desc->status.b.bytes = ep->maxpacket;
++				dma_desc->buf = ep->dma_addr;
++				dma_desc->status.b.bs = BS_HOST_READY;
++
++				/** DOEPDMA0 Register write */
++				dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
++	}
++}
++
++/**
++ * This function continues control IN transfers started by
++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
++ * single packet.  NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
++ * bit for the packet count.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	dwc_otg_dma_desc_t* dma_desc;
++
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++			core_if->dev_if->in_ep_regs[0];
++		gnptxsts_data_t tx_status = { .d32 = 0 };
++
++		tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
++		/** @todo Should there be check for room in the Tx
++		 * Status Queue.  If not remove the code above this comment. */
++
++		depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++		/* Program the transfer size and packet count
++		 *	as follows: xfersize = N * maxpacket +
++		 *	short_packet pktcnt = N + (short_packet
++		 *	exist ? 1 : 0)
++		 */
++
++
++		if(core_if->dma_desc_enable == 0) {
++			deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
++					(ep->total_len - ep->xfer_count);
++			deptsiz.b.pktcnt = 1;
++			if(core_if->dma_enable == 0) {
++				ep->xfer_len += deptsiz.b.xfersize;
++			} else {
++				ep->xfer_len = deptsiz.b.xfersize;
++			}
++			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++		}
++		else {
++			ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
++				(ep->total_len - ep->xfer_count);
++
++			dma_desc = core_if->dev_if->in_desc_addr;
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++			dma_desc->status.b.bytes = ep->xfer_len;
++			dma_desc->buf = ep->dma_addr;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DIEPDMA0 Register write */
++			dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
++		}
++
++
++		DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			ep->xfer_len,
++			deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			if(core_if->dma_desc_enable == 0)
++				dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr);
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++		/**
++		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++		 * data will be written into the fifo by the ISR.
++		 */
++		if (!core_if->dma_enable) {
++			if(core_if->en_multiple_tx_fifo == 0) {
++				/* First clear it from GINTSTS */
++				intr_mask.b.nptxfempty = 1;
++				dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++					intr_mask.d32, intr_mask.d32);
++
++			}
++			else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if(ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << ep->num;
++					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						0, fifoemptymsk);
++				}
++			}
++		}
++	}
++	else {
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++			core_if->dev_if->out_ep_regs[0];
++
++
++		depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++		deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count
++		 *	as follows: xfersize = N * maxpacket +
++		 *	short_packet pktcnt = N + (short_packet
++		 *	exist ? 1 : 0)
++		 */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++
++		if(core_if->dma_desc_enable == 0) {
++			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++		else {
++			dma_desc = core_if->dev_if->out_desc_addr;
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.bytes = ep->maxpacket;
++			dma_desc->buf = ep->dma_addr;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++			dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
++		}
++
++
++		DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			ep->xfer_len,
++			deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			if(core_if->dma_desc_enable == 0)
++				dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr);
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++	}
++}
++
++#ifdef DEBUG
++void dump_msg(const u8 *buf, unsigned int length)
++{
++	unsigned int	start, num, i;
++	char		line[52], *p;
++
++	if (length >= 512)
++		return;
++	start = 0;
++	while (length > 0) {
++		num = min(length, 16u);
++		p = line;
++		for (i = 0; i < num; ++i)
++		{
++			if (i == 8)
++				*p++ = ' ';
++			sprintf(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		DWC_PRINT("%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++}
++#else
++static inline void dump_msg(const u8 *buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function writes a packet into the Tx FIFO associated with the
++ * EP.	For non-periodic EPs the non-periodic Tx FIFO is written.  For
++ * periodic EPs the periodic Tx FIFO associated with the EP is written
++ * with all packets for the next micro-frame.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to write packet for.
++ * @param dma Indicates if DMA is being used.
++ */
++void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma)
++{
++	/**
++	 * The buffer is padded to DWORD on a per packet basis in
++	 * slave/dma mode if the MPS is not DWORD aligned.	The last
++	 * packet, if short, is also padded to a multiple of DWORD.
++	 *
++	 * ep->xfer_buff always starts DWORD aligned in memory and is a
++	 * multiple of DWORD in length
++	 *
++	 * ep->xfer_len can be any number of bytes
++	 *
++	 * ep->xfer_count is a multiple of ep->maxpacket until the last
++	 *	packet
++	 *
++	 * FIFO access is DWORD */
++
++	uint32_t i;
++	uint32_t byte_count;
++	uint32_t dword_count;
++	uint32_t *fifo;
++	uint32_t *data_buff = (uint32_t *)ep->xfer_buff;
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep);
++	if (ep->xfer_count >= ep->xfer_len) {
++			DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
++			return;
++	}
++
++	/* Find the byte length of the packet either short packet or MPS */
++	if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
++		byte_count = ep->xfer_len - ep->xfer_count;
++	}
++	else {
++		byte_count = ep->maxpacket;
++	}
++
++	/* Find the DWORD length, padded by extra bytes as neccessary if MPS
++	 * is not a multiple of DWORD */
++	dword_count =  (byte_count + 3) / 4;
++
++#ifdef VERBOSE
++	dump_msg(ep->xfer_buff, byte_count);
++#endif
++
++	/**@todo NGS Where are the Periodic Tx FIFO addresses
++	 * intialized?	What should this be? */
++
++	fifo = core_if->data_fifo[ep->num];
++
++
++	DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count);
++
++	if (!dma) {
++		for (i=0; i<dword_count; i++, data_buff++) {
++			dwc_write_reg32(fifo, *data_buff);
++		}
++	}
++
++	ep->xfer_count += byte_count;
++	ep->xfer_buff += byte_count;
++	ep->dma_addr += byte_count;
++}
++
++/**
++ * Set the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to set the stall on.
++ */
++void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++		(ep->is_in?"IN":"OUT"));
++
++	DWC_PRINT("%s ep%d-%s\n", __func__, ep->num,
++		(ep->is_in?"in":"out"));
++
++	if (ep->is_in == 1) {
++		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++		depctl.d32 = dwc_read_reg32(depctl_addr);
++
++		/* set the disable and stall bits */
++		if (depctl.b.epena) {
++			depctl.b.epdis = 1;
++		}
++		depctl.b.stall = 1;
++		dwc_write_reg32(depctl_addr, depctl.d32);
++	}
++	else {
++		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++		depctl.d32 = dwc_read_reg32(depctl_addr);
++
++		/* set the stall bit */
++		depctl.b.stall = 1;
++		dwc_write_reg32(depctl_addr, depctl.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++
++	return;
++}
++
++/**
++ * Clear the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to clear stall from.
++ */
++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++		(ep->is_in?"IN":"OUT"));
++
++	if (ep->is_in == 1) {
++		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++	}
++	else {
++		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++	}
++
++	depctl.d32 = dwc_read_reg32(depctl_addr);
++
++	/* clear the stall bits */
++	depctl.b.stall = 0;
++
++	/*
++	 * USB Spec 9.4.5: For endpoints using data toggle, regardless
++	 * of whether an endpoint has the Halt feature set, a
++	 * ClearFeature(ENDPOINT_HALT) request always results in the
++	 * data toggle being reinitialized to DATA0.
++	 */
++	if (ep->type == DWC_OTG_EP_TYPE_INTR ||
++		ep->type == DWC_OTG_EP_TYPE_BULK) {
++		depctl.b.setd0pid = 1; /* DATA0 */
++	}
++
++	dwc_write_reg32(depctl_addr, depctl.d32);
++	DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++	return;
++}
++
++/**
++ * This function reads a packet from the Rx FIFO into the destination
++ * buffer.	To read SETUP data use dwc_otg_read_setup_packet.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest	  Destination buffer for the packet.
++ * @param bytes  Number of bytes to copy to the destination.
++ */
++void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
++			 uint8_t *dest,
++			 uint16_t bytes)
++{
++	int i;
++	int word_count = (bytes + 3) / 4;
++
++	volatile uint32_t *fifo = core_if->data_fifo[0];
++	uint32_t *data_buff = (uint32_t *)dest;
++
++	/**
++	 * @todo Account for the case where _dest is not dword aligned. This
++	 * requires reading data from the FIFO into a uint32_t temp buffer,
++	 * then moving it into the data buffer.
++	 */
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
++					core_if, dest, bytes);
++
++	for (i=0; i<word_count; i++, data_buff++)
++	{
++		*data_buff = dwc_read_reg32(fifo);
++	}
++
++	return;
++}
++
++
++
++/**
++ * This functions reads the device registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Device Global Registers\n");
++	addr=&core_if->dev_if->dev_global_regs->dcfg;
++	DWC_PRINT("DCFG		 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->dctl;
++	DWC_PRINT("DCTL		 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->dsts;
++	DWC_PRINT("DSTS		 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->diepmsk;
++	DWC_PRINT("DIEPMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->doepmsk;
++	DWC_PRINT("DOEPMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->daint;
++	DWC_PRINT("DAINT	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->daintmsk;
++	DWC_PRINT("DAINTMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->dtknqr1;
++	DWC_PRINT("DTKNQR1	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
++		addr=&core_if->dev_if->dev_global_regs->dtknqr2;
++		DWC_PRINT("DTKNQR2	 @0x%08X : 0x%08X\n",
++		  (uint32_t)addr,dwc_read_reg32(addr));
++	}
++
++	addr=&core_if->dev_if->dev_global_regs->dvbusdis;
++	DWC_PRINT("DVBUSID	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	addr=&core_if->dev_if->dev_global_regs->dvbuspulse;
++	DWC_PRINT("DVBUSPULSE	@0x%08X : 0x%08X\n",
++				  (uint32_t)addr,dwc_read_reg32(addr));
++
++	if (core_if->hwcfg2.b.dev_token_q_depth > 14) {
++		addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
++		DWC_PRINT("DTKNQR3_DTHRCTL	 @0x%08X : 0x%08X\n",
++		  (uint32_t)addr, dwc_read_reg32(addr));
++	}
++/*
++	if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
++		addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++		DWC_PRINT("DTKNQR4	 @0x%08X : 0x%08X\n",
++				  (uint32_t)addr, dwc_read_reg32(addr));
++	}
++*/
++	addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++	DWC_PRINT("FIFOEMPMSK	 @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr));
++
++	addr=&core_if->dev_if->dev_global_regs->deachint;
++	DWC_PRINT("DEACHINT	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->deachintmsk;
++	DWC_PRINT("DEACHINTMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
++		addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i];
++		DWC_PRINT("DIEPEACHINTMSK[%d]	 @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
++	}
++
++
++	for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
++		addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i];
++		DWC_PRINT("DOEPEACHINTMSK[%d]	 @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
++	}
++
++	for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
++		DWC_PRINT("Device IN EP %d Registers\n", i);
++		addr=&core_if->dev_if->in_ep_regs[i]->diepctl;
++		DWC_PRINT("DIEPCTL	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->in_ep_regs[i]->diepint;
++		DWC_PRINT("DIEPINT	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz;
++		DWC_PRINT("DIETSIZ	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->in_ep_regs[i]->diepdma;
++		DWC_PRINT("DIEPDMA	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts;
++		DWC_PRINT("DTXFSTS	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->in_ep_regs[i]->diepdmab;
++		DWC_PRINT("DIEPDMAB	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	}
++
++
++	for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
++		DWC_PRINT("Device OUT EP %d Registers\n", i);
++		addr=&core_if->dev_if->out_ep_regs[i]->doepctl;
++		DWC_PRINT("DOEPCTL	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->out_ep_regs[i]->doepfn;
++		DWC_PRINT("DOEPFN	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->out_ep_regs[i]->doepint;
++		DWC_PRINT("DOEPINT	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz;
++		DWC_PRINT("DOETSIZ	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->out_ep_regs[i]->doepdma;
++		DWC_PRINT("DOEPDMA	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->out_ep_regs[i]->doepdmab;
++		DWC_PRINT("DOEPDMAB	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	}
++
++
++
++	return;
++}
++
++/**
++ * This functions reads the SPRAM and prints its content
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if)
++{
++	volatile uint8_t *addr, *start_addr, *end_addr;
++
++	DWC_PRINT("SPRAM Data:\n");
++	start_addr = (void*)core_if->core_global_regs;
++	DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
++	start_addr += 0x00028000;
++	end_addr=(void*)core_if->core_global_regs;
++	end_addr += 0x000280e0;
++
++	for(addr = start_addr; addr < end_addr; addr+=16)
++	{
++		DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr,
++			addr[0],
++			addr[1],
++			addr[2],
++			addr[3],
++			addr[4],
++			addr[5],
++			addr[6],
++			addr[7],
++			addr[8],
++			addr[9],
++			addr[10],
++			addr[11],
++			addr[12],
++			addr[13],
++			addr[14],
++			addr[15]
++			);
++	}
++
++	return;
++}
++/**
++ * This function reads the host registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Host Global Registers\n");
++	addr=&core_if->host_if->host_global_regs->hcfg;
++	DWC_PRINT("HCFG		 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->host_if->host_global_regs->hfir;
++	DWC_PRINT("HFIR		 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->host_if->host_global_regs->hfnum;
++	DWC_PRINT("HFNUM	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->host_if->host_global_regs->hptxsts;
++	DWC_PRINT("HPTXSTS	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->host_if->host_global_regs->haint;
++	DWC_PRINT("HAINT	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->host_if->host_global_regs->haintmsk;
++	DWC_PRINT("HAINTMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=core_if->host_if->hprt0;
++	DWC_PRINT("HPRT0	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	for (i=0; i<core_if->core_params->host_channels; i++)
++	{
++		DWC_PRINT("Host Channel %d Specific Registers\n", i);
++		addr=&core_if->host_if->hc_regs[i]->hcchar;
++		DWC_PRINT("HCCHAR	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->host_if->hc_regs[i]->hcsplt;
++		DWC_PRINT("HCSPLT	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->host_if->hc_regs[i]->hcint;
++		DWC_PRINT("HCINT	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->host_if->hc_regs[i]->hcintmsk;
++		DWC_PRINT("HCINTMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->host_if->hc_regs[i]->hctsiz;
++		DWC_PRINT("HCTSIZ	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->host_if->hc_regs[i]->hcdma;
++		DWC_PRINT("HCDMA	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	}
++	return;
++}
++
++/**
++ * This function reads the core global registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Core Global Registers\n");
++	addr=&core_if->core_global_regs->gotgctl;
++	DWC_PRINT("GOTGCTL	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gotgint;
++	DWC_PRINT("GOTGINT	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gahbcfg;
++	DWC_PRINT("GAHBCFG	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gusbcfg;
++	DWC_PRINT("GUSBCFG	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->grstctl;
++	DWC_PRINT("GRSTCTL	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gintsts;
++	DWC_PRINT("GINTSTS	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gintmsk;
++	DWC_PRINT("GINTMSK	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->grxstsr;
++	DWC_PRINT("GRXSTSR	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	//addr=&core_if->core_global_regs->grxstsp;
++	//DWC_PRINT("GRXSTSP   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->grxfsiz;
++	DWC_PRINT("GRXFSIZ	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gnptxfsiz;
++	DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gnptxsts;
++	DWC_PRINT("GNPTXSTS	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gi2cctl;
++	DWC_PRINT("GI2CCTL	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gpvndctl;
++	DWC_PRINT("GPVNDCTL	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->ggpio;
++	DWC_PRINT("GGPIO	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->guid;
++	DWC_PRINT("GUID		 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gsnpsid;
++	DWC_PRINT("GSNPSID	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->ghwcfg1;
++	DWC_PRINT("GHWCFG1	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->ghwcfg2;
++	DWC_PRINT("GHWCFG2	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->ghwcfg3;
++	DWC_PRINT("GHWCFG3	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->ghwcfg4;
++	DWC_PRINT("GHWCFG4	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->hptxfsiz;
++	DWC_PRINT("HPTXFSIZ	 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	for (i=0; i<core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++	{
++		addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i];
++		DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr));
++	}
++}
++
++/**
++ * Flush a Tx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param num Tx FIFO to flush.
++ */
++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if,
++					   const int num)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = { .d32 = 0};
++	int count = 0;
++
++	DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num);
++
++	greset.b.txfflsh = 1;
++	greset.b.txfnum = num;
++	dwc_write_reg32(&global_regs->grstctl, greset.d32);
++
++	do {
++		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++					  __func__, greset.d32,
++			dwc_read_reg32(&global_regs->gnptxsts));
++			break;
++		}
++	}
++	while (greset.b.txfflsh == 1);
++
++	/* Wait for 3 PHY Clocks*/
++	UDELAY(1);
++}
++
++/**
++ * Flush Rx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = { .d32 = 0};
++	int count = 0;
++
++	DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
++	/*
++	 *
++	 */
++	greset.b.rxfflsh = 1;
++	dwc_write_reg32(&global_regs->grstctl, greset.d32);
++
++	do {
++		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
++				greset.d32);
++			break;
++		}
++	}
++	while (greset.b.rxfflsh == 1);
++
++	/* Wait for 3 PHY Clocks*/
++	UDELAY(1);
++}
++
++/**
++ * Do core a soft reset of the core.  Be careful with this because it
++ * resets all the internal state machines of the core.
++ */
++void dwc_otg_core_reset(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = { .d32 = 0};
++	int count = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
++	/* Wait for AHB master IDLE state. */
++	do {
++		UDELAY(10);
++		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++		if (++count > 100000) {
++			DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
++				greset.d32);
++			return;
++		}
++	}
++	while (greset.b.ahbidle == 0);
++
++	/* Core Soft Reset */
++	count = 0;
++	greset.b.csftrst = 1;
++	dwc_write_reg32(&global_regs->grstctl, greset.d32);
++	do {
++		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
++				greset.d32);
++			break;
++		}
++	}
++	while (greset.b.csftrst == 1);
++
++	/* Wait for 3 PHY Clocks*/
++	MDELAY(100);
++}
++
++
++
++/**
++ * Register HCD callbacks.	The callbacks are used to start and stop
++ * the HCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the HCD callback structure.
++ * @param p pointer to be passed to callback function (usb_hcd*).
++ */
++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if,
++						dwc_otg_cil_callbacks_t *cb,
++						void *p)
++{
++	core_if->hcd_cb = cb;
++	cb->p = p;
++}
++
++/**
++ * Register PCD callbacks.	The callbacks are used to start and stop
++ * the PCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the PCD callback structure.
++ * @param p pointer to be passed to callback function (pcd*).
++ */
++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if,
++						dwc_otg_cil_callbacks_t *cb,
++						void *p)
++{
++	core_if->pcd_cb = cb;
++	cb->p = p;
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function writes isoc data per 1 (micro)frame into tx fifo
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0};
++	uint32_t len = 0;
++	uint32_t dwords;
++
++	ep->xfer_len = ep->data_per_frame;
++	ep->xfer_count = 0;
++
++	ep_regs = core_if->dev_if->in_ep_regs[ep->num];
++
++	len = ep->xfer_len - ep->xfer_count;
++
++	if (len > ep->maxpacket) {
++		len = ep->maxpacket;
++	}
++
++	dwords = (len + 3)/4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32);
++
++	while  (txstatus.b.txfspcavail > dwords &&
++		ep->xfer_count < ep->xfer_len &&
++		ep->xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, ep, 0);
++
++		len = ep->xfer_len - ep->xfer_count;
++		if (len > ep->maxpacket) {
++			len = ep->maxpacket;
++		}
++
++		dwords = (len + 3)/4;
++		txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
++	}
++}
++
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	deptsiz_data_t		deptsiz = { .d32 = 0 };
++	depctl_data_t 		depctl = { .d32 = 0 };
++	dsts_data_t		dsts = { .d32 = 0 };
++	volatile uint32_t 	*addr;
++
++	if(ep->is_in) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	ep->xfer_len = ep->data_per_frame;
++	ep->xfer_count = 0;
++	ep->xfer_buff = ep->cur_pkt_addr;
++	ep->dma_addr = ep->cur_pkt_dma_addr;
++
++	if(ep->is_in) {
++		/* Program the transfer size and packet count
++		 *	as follows: xfersize = N * maxpacket +
++		 *	short_packet pktcnt = N + (short_packet
++		 *	exist ? 1 : 0)
++		 */
++		deptsiz.b.xfersize = ep->xfer_len;
++		deptsiz.b.pktcnt =
++			(ep->xfer_len - 1 + ep->maxpacket) /
++			ep->maxpacket;
++		deptsiz.b.mc = deptsiz.b.pktcnt;
++		dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
++		}
++	} else {
++		deptsiz.b.pktcnt =
++				(ep->xfer_len + (ep->maxpacket - 1)) /
++				ep->maxpacket;
++		deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++		dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
++
++		if (core_if->dma_enable) {
++				dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma),
++					(uint32_t)ep->dma_addr);
++		}
++	}
++
++
++	/** Enable endpoint, clear nak  */
++
++	depctl.d32 = 0;
++	if(ep->bInterval == 1) {
++		dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++		ep->next_frame = dsts.b.soffn + ep->bInterval;
++
++		if(ep->next_frame & 0x1) {
++			depctl.b.setd1pid = 1;
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++	} else {
++		ep->next_frame += ep->bInterval;
++
++		if(ep->next_frame & 0x1) {
++			depctl.b.setd1pid = 1;
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++	}
++	depctl.b.epena = 1;
++	depctl.b.cnak = 1;
++
++	dwc_modify_reg32(addr, 0, depctl.d32);
++	depctl.d32 = dwc_read_reg32(addr);
++
++	if(ep->is_in && core_if->dma_enable == 0) {
++		write_isoc_frame_data(core_if, ep);
++	}
++
++}
++
++#endif //DWC_EN_ISOC
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil.h
+@@ -0,0 +1,1098 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1099526 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CIL_H__)
++#define __DWC_CIL_H__
++
++#include <linux/workqueue.h>
++#include <linux/version.h>
++#include <asm/param.h>
++
++#include "linux/dwc_otg_plat.h"
++#include "dwc_otg_regs.h"
++#ifdef DEBUG
++#include "linux/timer.h"
++#endif
++
++/**
++ * @file
++ * This file contains the interface to the Core Interface Layer.
++ */
++
++
++/** Macros defined for DWC OTG HW Release verison */
++#define OTG_CORE_REV_2_00	0x4F542000
++#define OTG_CORE_REV_2_60a	0x4F54260A
++#define OTG_CORE_REV_2_71a	0x4F54271A
++#define OTG_CORE_REV_2_72a	0x4F54272A
++
++/**
++*/
++typedef struct iso_pkt_info
++{
++	uint32_t	offset;
++	uint32_t 	length;
++	int32_t 	status;
++} iso_pkt_info_t;
++/**
++ * The <code>dwc_ep</code> structure represents the state of a single
++ * endpoint when acting in device mode. It contains the data items
++ * needed for an endpoint to be activated and transfer packets.
++ */
++typedef struct dwc_ep
++{
++	/** EP number used for register address lookup */
++	uint8_t	 num;
++	/** EP direction 0 = OUT */
++	unsigned is_in : 1;
++	/** EP active. */
++	unsigned active : 1;
++
++	/** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
++		If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
++	unsigned tx_fifo_num : 4;
++	/** EP type: 0 - Control, 1 - ISOC,	 2 - BULK,	3 - INTR */
++	unsigned type : 2;
++#define DWC_OTG_EP_TYPE_CONTROL	   0
++#define DWC_OTG_EP_TYPE_ISOC	   1
++#define DWC_OTG_EP_TYPE_BULK	   2
++#define DWC_OTG_EP_TYPE_INTR	   3
++
++	/** DATA start PID for INTR and BULK EP */
++	unsigned data_pid_start : 1;
++	/** Frame (even/odd) for ISOC EP */
++	unsigned even_odd_frame : 1;
++	/** Max Packet bytes */
++	unsigned maxpacket : 11;
++
++	/** Max Transfer size */
++	unsigned maxxfer : 16;
++
++	/** @name Transfer state */
++	/** @{ */
++
++	/**
++	 * Pointer to the beginning of the transfer buffer -- do not modify
++	 * during transfer.
++	 */
++
++	uint32_t dma_addr;
++
++	uint32_t dma_desc_addr;
++	dwc_otg_dma_desc_t* desc_addr;
++
++
++	uint8_t *start_xfer_buff;
++	/** pointer to the transfer buffer */
++	uint8_t *xfer_buff;
++	/** Number of bytes to transfer */
++	unsigned xfer_len : 19;
++	/** Number of bytes transferred. */
++	unsigned xfer_count : 19;
++	/** Sent ZLP */
++	unsigned sent_zlp : 1;
++	/** Total len for control transfer */
++	unsigned total_len : 19;
++
++	/** stall clear flag */
++	unsigned stall_clear_flag : 1;
++
++	/** Allocated DMA Desc count */
++	uint32_t 	desc_cnt;
++
++#ifdef DWC_EN_ISOC
++	/**
++	 * Variables specific for ISOC EPs
++	 *
++	 */
++	/** DMA addresses of ISOC buffers */
++	uint32_t 	dma_addr0;
++	uint32_t	dma_addr1;
++
++	uint32_t 	iso_dma_desc_addr;
++	dwc_otg_dma_desc_t* iso_desc_addr;
++
++	/** pointer to the transfer buffers */
++	uint8_t		*xfer_buff0;
++	uint8_t		*xfer_buff1;
++
++	/** number of ISOC Buffer is processing */
++	uint32_t 	proc_buf_num;
++	/** Interval of ISOC Buffer processing */
++	uint32_t 	buf_proc_intrvl;
++	/** Data size for regular frame */
++	uint32_t 	data_per_frame;
++
++	/* todo - pattern data support is to be implemented in the future */
++	/** Data size for pattern frame */
++	uint32_t 	data_pattern_frame;
++	/** Frame number of pattern data */
++	uint32_t 	sync_frame;
++
++	/** bInterval */
++	uint32_t 	bInterval;
++	/** ISO Packet number per frame */
++	uint32_t 	pkt_per_frm;
++	/** Next frame num for which will be setup DMA Desc */
++	uint32_t 	next_frame;
++	/** Number of packets per buffer processing */
++	uint32_t	pkt_cnt;
++	/** Info for all isoc packets */
++	iso_pkt_info_t	*pkt_info;
++	/** current pkt number */
++	uint32_t	cur_pkt;
++	/** current pkt number */
++	uint8_t 	*cur_pkt_addr;
++	/** current pkt number */
++	uint32_t	cur_pkt_dma_addr;
++#endif //DWC_EN_ISOC
++/** @} */
++} dwc_ep_t;
++
++/*
++ * Reasons for halting a host channel.
++ */
++typedef enum dwc_otg_halt_status
++{
++	DWC_OTG_HC_XFER_NO_HALT_STATUS,
++	DWC_OTG_HC_XFER_COMPLETE,
++	DWC_OTG_HC_XFER_URB_COMPLETE,
++	DWC_OTG_HC_XFER_ACK,
++	DWC_OTG_HC_XFER_NAK,
++	DWC_OTG_HC_XFER_NYET,
++	DWC_OTG_HC_XFER_STALL,
++	DWC_OTG_HC_XFER_XACT_ERR,
++	DWC_OTG_HC_XFER_FRAME_OVERRUN,
++	DWC_OTG_HC_XFER_BABBLE_ERR,
++	DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
++	DWC_OTG_HC_XFER_AHB_ERR,
++	DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
++	DWC_OTG_HC_XFER_URB_DEQUEUE
++} dwc_otg_halt_status_e;
++
++/**
++ * Host channel descriptor. This structure represents the state of a single
++ * host channel when acting in host mode. It contains the data items needed to
++ * transfer packets to an endpoint via a host channel.
++ */
++typedef struct dwc_hc
++{
++	/** Host channel number used for register address lookup */
++	uint8_t	 hc_num;
++
++	/** Device to access */
++	unsigned dev_addr : 7;
++
++	/** EP to access */
++	unsigned ep_num : 4;
++
++	/** EP direction. 0: OUT, 1: IN */
++	unsigned ep_is_in : 1;
++
++	/**
++	 * EP speed.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_SPEED_LOW
++	 *	- DWC_OTG_EP_SPEED_FULL
++	 *	- DWC_OTG_EP_SPEED_HIGH
++	 */
++	unsigned speed : 2;
++#define DWC_OTG_EP_SPEED_LOW	0
++#define DWC_OTG_EP_SPEED_FULL	1
++#define DWC_OTG_EP_SPEED_HIGH	2
++
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_TYPE_CONTROL: 0
++	 *	- DWC_OTG_EP_TYPE_ISOC: 1
++	 *	- DWC_OTG_EP_TYPE_BULK: 2
++	 *	- DWC_OTG_EP_TYPE_INTR: 3
++	 */
++	unsigned ep_type : 2;
++
++	/** Max packet size in bytes */
++	unsigned max_packet : 11;
++
++	/**
++	 * PID for initial transaction.
++	 * 0: DATA0,<br>
++	 * 1: DATA2,<br>
++	 * 2: DATA1,<br>
++	 * 3: MDATA (non-Control EP),
++	 *	  SETUP (Control EP)
++	 */
++	unsigned data_pid_start : 2;
++#define DWC_OTG_HC_PID_DATA0 0
++#define DWC_OTG_HC_PID_DATA2 1
++#define DWC_OTG_HC_PID_DATA1 2
++#define DWC_OTG_HC_PID_MDATA 3
++#define DWC_OTG_HC_PID_SETUP 3
++
++	/** Number of periodic transactions per (micro)frame */
++	unsigned multi_count: 2;
++
++	/** @name Transfer State */
++	/** @{ */
++
++	/** Pointer to the current transfer buffer position. */
++	uint8_t *xfer_buff;
++	/** Total number of bytes to transfer. */
++	uint32_t xfer_len;
++	/** Number of bytes transferred so far. */
++	uint32_t xfer_count;
++	/** Packet count at start of transfer.*/
++	uint16_t start_pkt_count;
++
++	/**
++	 * Flag to indicate whether the transfer has been started. Set to 1 if
++	 * it has been started, 0 otherwise.
++	 */
++	uint8_t xfer_started;
++
++	/**
++	 * Set to 1 to indicate that a PING request should be issued on this
++	 * channel. If 0, process normally.
++	 */
++	uint8_t do_ping;
++
++	/**
++	 * Set to 1 to indicate that the error count for this transaction is
++	 * non-zero. Set to 0 if the error count is 0.
++	 */
++	uint8_t error_state;
++
++	/**
++	 * Set to 1 to indicate that this channel should be halted the next
++	 * time a request is queued for the channel. This is necessary in
++	 * slave mode if no request queue space is available when an attempt
++	 * is made to halt the channel.
++	 */
++	uint8_t halt_on_queue;
++
++	/**
++	 * Set to 1 if the host channel has been halted, but the core is not
++	 * finished flushing queued requests. Otherwise 0.
++	 */
++	uint8_t halt_pending;
++
++	/**
++	 * Reason for halting the host channel.
++	 */
++	dwc_otg_halt_status_e	halt_status;
++
++	/*
++	 * Split settings for the host channel
++	 */
++	uint8_t do_split;		   /**< Enable split for the channel */
++	uint8_t complete_split;	   /**< Enable complete split */
++	uint8_t hub_addr;		   /**< Address of high speed hub */
++
++	uint8_t port_addr;		   /**< Port of the low/full speed device */
++	/** Split transaction position
++	 * One of the following values:
++	 *	  - DWC_HCSPLIT_XACTPOS_MID
++	 *	  - DWC_HCSPLIT_XACTPOS_BEGIN
++	 *	  - DWC_HCSPLIT_XACTPOS_END
++	 *	  - DWC_HCSPLIT_XACTPOS_ALL */
++	uint8_t xact_pos;
++
++	/** Set when the host channel does a short read. */
++	uint8_t short_read;
++
++	/**
++	 * Number of requests issued for this channel since it was assigned to
++	 * the current transfer (not counting PINGs).
++	 */
++	uint8_t requests;
++
++	/**
++	 * Queue Head for the transfer being processed by this channel.
++	 */
++	struct dwc_otg_qh *qh;
++
++	/** @} */
++
++	/** Entry in list of host channels. */
++	struct list_head	hc_list_entry;
++} dwc_hc_t;
++
++/**
++ * The following parameters may be specified when starting the module. These
++ * parameters define how the DWC_otg controller should be configured.
++ * Parameter values are passed to the CIL initialization function
++ * dwc_otg_cil_init.
++ */
++typedef struct dwc_otg_core_params
++{
++	int32_t opt;
++#define dwc_param_opt_default 1
++
++	/**
++	 * Specifies the OTG capabilities. The driver will automatically
++	 * detect the value for this parameter if none is specified.
++	 * 0 - HNP and SRP capable (default)
++	 * 1 - SRP Only capable
++	 * 2 - No HNP/SRP capable
++	 */
++	int32_t otg_cap;
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
++
++	/**
++	 * Specifies whether to use slave or DMA mode for accessing the data
++	 * FIFOs. The driver will automatically detect the value for this
++	 * parameter if none is specified.
++	 * 0 - Slave
++	 * 1 - DMA (default, if available)
++	 */
++	int32_t dma_enable;
++#define dwc_param_dma_enable_default 1
++
++	/**
++	 * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data
++	 * FIFOs in device mode. The driver will automatically detect the value for this
++	 * parameter if none is specified.
++	 * 0 - address DMA
++	 * 1 - DMA Descriptor(default, if available)
++	 */
++	int32_t dma_desc_enable;
++#define dwc_param_dma_desc_enable_default 0
++	/** The DMA Burst size (applicable only for External DMA
++	 * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++	 */
++	int32_t dma_burst_size;	 /* Translate this to GAHBCFG values */
++#define dwc_param_dma_burst_size_default 32
++
++	/**
++	 * Specifies the maximum speed of operation in host and device mode.
++	 * The actual speed depends on the speed of the attached device and
++	 * the value of phy_type. The actual speed depends on the speed of the
++	 * attached device.
++	 * 0 - High Speed (default)
++	 * 1 - Full Speed
++	 */
++	int32_t speed;
++#define dwc_param_speed_default 0
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++
++	/** Specifies whether low power mode is supported when attached
++	 *	to a Full Speed or Low Speed device in host mode.
++	 * 0 - Don't support low power mode (default)
++	 * 1 - Support low power mode
++	 */
++	int32_t host_support_fs_ls_low_power;
++#define dwc_param_host_support_fs_ls_low_power_default 0
++
++	/** Specifies the PHY clock rate in low power mode when connected to a
++	 * Low Speed device in host mode. This parameter is applicable only if
++	 * HOST_SUPPORT_FS_LS_LOW_POWER is enabled.	 If PHY_TYPE is set to FS
++	 * then defaults to 6 MHZ otherwise 48 MHZ.
++	 *
++	 * 0 - 48 MHz
++	 * 1 - 6 MHz
++	 */
++	int32_t host_ls_low_power_phy_clk;
++#define dwc_param_host_ls_low_power_phy_clk_default 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++
++	/**
++	 * 0 - Use cC FIFO size parameters
++	 * 1 - Allow dynamic FIFO sizing (default)
++	 */
++	int32_t enable_dynamic_fifo;
++#define dwc_param_enable_dynamic_fifo_default 1
++
++	/** Total number of 4-byte words in the data FIFO memory. This
++	 * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++	 * Tx FIFOs.
++	 * 32 to 32768 (default 8192)
++	 * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++	 */
++	int32_t data_fifo_size;
++#define dwc_param_data_fifo_size_default 8192
++
++	/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1064)
++	 */
++	int32_t dev_rx_fifo_size;
++#define dwc_param_dev_rx_fifo_size_default  1064
++
++	/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
++	 * when dynamic FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t dev_nperio_tx_fifo_size;
++#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++
++	/** Number of 4-byte words in each of the periodic Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++#define dwc_param_dev_perio_tx_fifo_size_default 256
++
++	/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_rx_fifo_size;
++#define dwc_param_host_rx_fifo_size_default 1024
++
++	/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
++	 * when Dynamic FIFO sizing is enabled in the core.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_nperio_tx_fifo_size;
++#define dwc_param_host_nperio_tx_fifo_size_default 1024
++
++	/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_perio_tx_fifo_size;
++#define dwc_param_host_perio_tx_fifo_size_default 1024
++
++	/** The maximum transfer size supported in bytes.
++	 * 2047 to 65,535  (default 65,535)
++	 */
++	int32_t max_transfer_size;
++#define dwc_param_max_transfer_size_default 65535
++
++	/** The maximum number of packets in a transfer.
++	 * 15 to 511  (default 511)
++	 */
++	int32_t max_packet_count;
++#define dwc_param_max_packet_count_default 511
++
++	/** The number of host channel registers to use.
++	 * 1 to 16 (default 12)
++	 * Note: The FPGA configuration supports a maximum of 12 host channels.
++	 */
++	int32_t host_channels;
++#define dwc_param_host_channels_default 12
++
++	/** The number of endpoints in addition to EP0 available for device
++	 * mode operations.
++	 * 1 to 15 (default 6 IN and OUT)
++	 * Note: The FPGA configuration supports a maximum of 6 IN and OUT
++	 * endpoints in addition to EP0.
++	 */
++	int32_t dev_endpoints;
++#define dwc_param_dev_endpoints_default 6
++
++		/**
++		 * Specifies the type of PHY interface to use. By default, the driver
++		 * will automatically detect the phy_type.
++		 *
++		 * 0 - Full Speed PHY
++		 * 1 - UTMI+ (default)
++		 * 2 - ULPI
++		 */
++	int32_t phy_type;
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++
++	/**
++	 * Specifies the UTMI+ Data Width.	This parameter is
++	 * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++	 * PHY_TYPE, this parameter indicates the data width between
++	 * the MAC and the ULPI Wrapper.) Also, this parameter is
++	 * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++	 * to "8 and 16 bits", meaning that the core has been
++	 * configured to work at either data path width.
++	 *
++	 * 8 or 16 bits (default 16)
++	 */
++	int32_t phy_utmi_width;
++#define dwc_param_phy_utmi_width_default 16
++
++	/**
++	 * Specifies whether the ULPI operates at double or single
++	 * data rate. This parameter is only applicable if PHY_TYPE is
++	 * ULPI.
++	 *
++	 * 0 - single data rate ULPI interface with 8 bit wide data
++	 * bus (default)
++	 * 1 - double data rate ULPI interface with 4 bit wide data
++	 * bus
++	 */
++	int32_t phy_ulpi_ddr;
++#define dwc_param_phy_ulpi_ddr_default 0
++
++	/**
++	 * Specifies whether to use the internal or external supply to
++	 * drive the vbus with a ULPI phy.
++	 */
++	int32_t phy_ulpi_ext_vbus;
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++
++	/**
++	 * Specifies whether to use the I2Cinterface for full speed PHY. This
++	 * parameter is only applicable if PHY_TYPE is FS.
++	 * 0 - No (default)
++	 * 1 - Yes
++	 */
++	int32_t i2c_enable;
++#define dwc_param_i2c_enable_default 0
++
++	int32_t ulpi_fs_ls;
++#define dwc_param_ulpi_fs_ls_default 0
++
++	int32_t ts_dline;
++#define dwc_param_ts_dline_default 0
++
++	/**
++	 * Specifies whether dedicated transmit FIFOs are
++	 * enabled for non periodic IN endpoints in device mode
++	 * 0 - No
++	 * 1 - Yes
++	 */
++	 int32_t en_multiple_tx_fifo;
++#define dwc_param_en_multiple_tx_fifo_default 1
++
++	/** Number of 4-byte words in each of the Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++#define dwc_param_dev_tx_fifo_size_default 256
++
++	/** Thresholding enable flag-
++	 * bit 0 - enable non-ISO Tx thresholding
++	 * bit 1 - enable ISO Tx thresholding
++	 * bit 2 - enable Rx thresholding
++	 */
++	uint32_t thr_ctl;
++#define dwc_param_thr_ctl_default 0
++
++	/** Thresholding length for Tx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t tx_thr_length;
++#define dwc_param_tx_thr_length_default 64
++
++	/** Thresholding length for Rx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t rx_thr_length;
++#define dwc_param_rx_thr_length_default 64
++
++	/** Per Transfer Interrupt
++	 *	mode enable flag
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	uint32_t pti_enable;
++#define dwc_param_pti_enable_default 0
++
++	/** Molti Processor Interrupt
++	 *	mode enable flag
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	uint32_t mpi_enable;
++#define dwc_param_mpi_enable_default 0
++
++} dwc_otg_core_params_t;
++
++#ifdef DEBUG
++struct dwc_otg_core_if;
++typedef struct hc_xfer_info
++{
++	struct dwc_otg_core_if	*core_if;
++	dwc_hc_t		*hc;
++} hc_xfer_info_t;
++#endif
++
++/**
++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
++ * the DWC_otg controller acting in either host or device mode. It
++ * represents the programming view of the controller as a whole.
++ */
++typedef struct dwc_otg_core_if
++{
++	/** Parameters that define how the core should be configured.*/
++	dwc_otg_core_params_t	   *core_params;
++
++	/** Core Global registers starting at offset 000h. */
++	dwc_otg_core_global_regs_t *core_global_regs;
++
++	/** Device-specific information */
++	dwc_otg_dev_if_t		   *dev_if;
++	/** Host-specific information */
++	dwc_otg_host_if_t		   *host_if;
++
++	/** Value from SNPSID register */
++	uint32_t snpsid;
++
++	/*
++	 * Set to 1 if the core PHY interface bits in USBCFG have been
++	 * initialized.
++	 */
++	uint8_t phy_init_done;
++
++	/*
++	 * SRP Success flag, set by srp success interrupt in FS I2C mode
++	 */
++	uint8_t srp_success;
++	uint8_t srp_timer_started;
++
++	/* Common configuration information */
++	/** Power and Clock Gating Control Register */
++	volatile uint32_t *pcgcctl;
++#define DWC_OTG_PCGCCTL_OFFSET 0xE00
++
++	/** Push/pop addresses for endpoints or host channels.*/
++	uint32_t *data_fifo[MAX_EPS_CHANNELS];
++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
++#define DWC_OTG_DATA_FIFO_SIZE 0x1000
++
++	/** Total RAM for FIFOs (Bytes) */
++	uint16_t total_fifo_size;
++	/** Size of Rx FIFO (Bytes) */
++	uint16_t rx_fifo_size;
++	/** Size of Non-periodic Tx FIFO (Bytes) */
++	uint16_t nperio_tx_fifo_size;
++
++
++	/** 1 if DMA is enabled, 0 otherwise. */
++	uint8_t dma_enable;
++
++	/** 1 if Descriptor DMA mode is enabled, 0 otherwise. */
++	uint8_t dma_desc_enable;
++
++	/** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
++	uint8_t pti_enh_enable;
++
++	/** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
++	uint8_t multiproc_int_enable;
++
++	/** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
++	uint8_t en_multiple_tx_fifo;
++
++	/** Set to 1 if multiple packets of a high-bandwidth transfer is in
++	 * process of being queued */
++	uint8_t queuing_high_bandwidth;
++
++	/** Hardware Configuration -- stored here for convenience.*/
++	hwcfg1_data_t hwcfg1;
++	hwcfg2_data_t hwcfg2;
++	hwcfg3_data_t hwcfg3;
++	hwcfg4_data_t hwcfg4;
++
++	/** Host and Device Configuration -- stored here for convenience.*/
++	hcfg_data_t hcfg;
++	dcfg_data_t dcfg;
++
++	/** The operational State, during transations
++	 * (a_host>>a_peripherial and b_device=>b_host) this may not
++	 * match the core but allows the software to determine
++	 * transitions.
++	 */
++	uint8_t op_state;
++
++	/**
++	 * Set to 1 if the HCD needs to be restarted on a session request
++	 * interrupt. This is required if no connector ID status change has
++	 * occurred since the HCD was last disconnected.
++	 */
++	uint8_t restart_hcd_on_session_req;
++
++	/** HCD callbacks */
++	/** A-Device is a_host */
++#define A_HOST		(1)
++	/** A-Device is a_suspend */
++#define A_SUSPEND	(2)
++	/** A-Device is a_peripherial */
++#define A_PERIPHERAL	(3)
++	/** B-Device is operating as a Peripheral. */
++#define B_PERIPHERAL	(4)
++	/** B-Device is operating as a Host. */
++#define B_HOST		(5)
++
++	/** HCD callbacks */
++	struct dwc_otg_cil_callbacks *hcd_cb;
++	/** PCD callbacks */
++	struct dwc_otg_cil_callbacks *pcd_cb;
++
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t p_tx_msk;
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t tx_msk;
++
++	/** Workqueue object used for handling several interrupts */
++	struct workqueue_struct *wq_otg;
++
++	/** Work object used for handling "Connector ID Status Change" Interrupt */
++	struct work_struct 	w_conn_id;
++
++	/** Work object used for handling "Wakeup Detected" Interrupt */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++	struct work_struct	w_wkp;
++#else
++	struct delayed_work	w_wkp;
++#endif
++
++#ifdef DEBUG
++	uint32_t		start_hcchar_val[MAX_EPS_CHANNELS];
++
++	hc_xfer_info_t		hc_xfer_info[MAX_EPS_CHANNELS];
++	struct timer_list	hc_xfer_timer[MAX_EPS_CHANNELS];
++
++	uint32_t		hfnum_7_samples;
++	uint64_t		hfnum_7_frrem_accum;
++	uint32_t		hfnum_0_samples;
++	uint64_t		hfnum_0_frrem_accum;
++	uint32_t		hfnum_other_samples;
++	uint64_t		hfnum_other_frrem_accum;
++#endif
++
++
++} dwc_otg_core_if_t;
++
++/*We must clear S3C24XX_EINTPEND external interrupt register
++ * because after clearing in this register trigerred IRQ from
++ * H/W core in kernel interrupt can be occured again before OTG
++ * handlers clear all IRQ sources of Core registers because of
++ * timing latencies and Low Level IRQ Type.
++ */
++
++#ifdef CONFIG_MACH_IPMATE
++#define  S3C2410X_CLEAR_EINTPEND()   \
++do { \
++	if (!dwc_otg_read_core_intr(core_if)) { \
++	__raw_writel(1UL << 11,S3C24XX_EINTPEND); \
++	} \
++} while (0)
++#else
++#define  S3C2410X_CLEAR_EINTPEND()   do { } while (0)
++#endif
++
++/*
++ * The following functions are functions for works
++ * using during handling some interrupts
++ */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++
++extern void w_conn_id_status_change(void *p);
++extern void w_wakeup_detected(void *p);
++
++#else
++
++extern void w_conn_id_status_change(struct work_struct *p);
++extern void w_wakeup_detected(struct work_struct *p);
++
++#endif
++
++
++/*
++ * The following functions support initialization of the CIL driver component
++ * and the DWC_otg controller.
++ */
++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
++					   dwc_otg_core_params_t *_core_params);
++extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
++
++/** @name Device CIL Functions
++ * The following functions support managing the DWC_otg controller in device
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_dump_spram(dwc_otg_core_if_t *_core_if);
++#ifdef DWC_EN_ISOC
++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
++#endif //DWC_EN_ISOC
++/**@}*/
++
++/** @name Host CIL Functions
++ * The following functions support managing the DWC_otg controller in host
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
++				dwc_hc_t *_hc,
++				dwc_otg_halt_status_e _halt_status);
++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
++
++/**
++ * This function Reads HPRT0 in preparation to modify.	It keeps the
++ * WC bits 0 so that if they are read as 1, they won't clear when you
++ * write it back
++ */
++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
++	hprt0.b.prtena = 0;
++	hprt0.b.prtconndet = 0;
++	hprt0.b.prtenchng = 0;
++	hprt0.b.prtovrcurrchng = 0;
++	return hprt0.d32;
++}
++
++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
++/**@}*/
++
++/** @name Common CIL Functions
++ * The following functions support managing the DWC_otg controller in either
++ * device or host mode.
++ */
++/**@{*/
++
++extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
++				uint8_t *dest,
++				uint16_t bytes);
++
++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
++
++extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
++								   const int _num );
++extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
++
++extern dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count);
++extern void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count);
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
++		dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
++}
++
++/**
++ * This function returns the OTG Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the IN endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *core_if)
++{
++	uint32_t v;
++
++	if(core_if->multiproc_int_enable) {
++		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
++				dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
++	} else {
++		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
++				dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
++	}
++	return (v & 0xffff);
++
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the OUT endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *core_if)
++{
++	uint32_t v;
++
++	if(core_if->multiproc_int_enable) {
++		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
++				dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
++	} else {
++		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
++				dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
++	}
++
++	return ((v & 0xffff0000) >> 16);
++}
++
++/**
++ * This function returns the Device IN EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *core_if,
++							dwc_ep_t *ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	uint32_t v, msk, emp;
++
++	if(core_if->multiproc_int_enable) {
++		msk = dwc_read_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num]);
++		emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++		msk |= ((emp >> ep->num) & 0x1) << 7;
++		v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++	} else {
++		msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
++		emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++		msk |= ((emp >> ep->num) & 0x1) << 7;
++		v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++	}
++
++
++	return v;
++}
++/**
++ * This function returns the Device OUT EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if,
++							dwc_ep_t *_ep)
++{
++	dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	uint32_t v;
++	doepmsk_data_t msk = { .d32 = 0 };
++
++	if(_core_if->multiproc_int_enable) {
++		msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepeachintmsk[_ep->num]);
++		if(_core_if->pti_enh_enable) {
++			msk.b.pktdrpsts = 1;
++		}
++		v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
++	} else {
++		msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
++		if(_core_if->pti_enh_enable) {
++			msk.b.pktdrpsts = 1;
++		}
++		v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
++	}
++	return v;
++}
++
++/**
++ * This function returns the Host All Channel Interrupt register
++ */
++static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
++}
++
++static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
++}
++
++
++/**
++ * This function returns the mode of the operation, host or device.
++ *
++ * @return 0 - Device Mode, 1 - Host Mode
++ */
++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
++}
++
++static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
++}
++static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
++}
++
++extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
++
++
++/**@}*/
++
++/**
++ * DWC_otg CIL callback structure.	This structure allows the HCD and
++ * PCD to register functions used for starting and stopping the PCD
++ * and HCD for role change on for a DRD.
++ */
++typedef struct dwc_otg_cil_callbacks
++{
++	/** Start function for role change */
++	int (*start) (void *_p);
++	/** Stop Function for role change */
++	int (*stop) (void *_p);
++	/** Disconnect Function for role change */
++	int (*disconnect) (void *_p);
++	/** Resume/Remote wakeup Function */
++	int (*resume_wakeup) (void *_p);
++	/** Suspend function */
++	int (*suspend) (void *_p);
++	/** Session Start (SRP) */
++	int (*session_start) (void *_p);
++	/** Pointer passed to start() and stop() */
++	void *p;
++} dwc_otg_cil_callbacks_t;
++
++extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
++						dwc_otg_cil_callbacks_t *_cb,
++						void *_p);
++extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
++						dwc_otg_cil_callbacks_t *_cb,
++						void *_p);
++
++#endif
++
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+@@ -0,0 +1,750 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1065567 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * This file contains the Common Interrupt handlers.
++ */
++#include "linux/dwc_otg_plat.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++#ifdef DEBUG
++inline const char *op_state_str(dwc_otg_core_if_t *core_if)
++{
++        return (core_if->op_state==A_HOST?"a_host":
++                (core_if->op_state==A_SUSPEND?"a_suspend":
++                 (core_if->op_state==A_PERIPHERAL?"a_peripheral":
++                  (core_if->op_state==B_PERIPHERAL?"b_peripheral":
++                   (core_if->op_state==B_HOST?"b_host":
++                    "unknown")))));
++}
++#endif
++
++/** This function will log a debug message
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *core_if)
++{
++	gintsts_data_t gintsts;
++	DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
++		 dwc_otg_mode(core_if) ? "Host" : "Device");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.modemismatch = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/** Start the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_start(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->hcd_cb && core_if->hcd_cb->start) {
++                core_if->hcd_cb->start(core_if->hcd_cb->p);
++        }
++}
++/** Stop the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_stop(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->hcd_cb && core_if->hcd_cb->stop) {
++                core_if->hcd_cb->stop(core_if->hcd_cb->p);
++        }
++}
++/** Disconnect the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_disconnect(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
++                core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
++        }
++}
++/** Inform the HCD the a New Session has begun.  Helper function for
++ * using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_session_start(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
++                core_if->hcd_cb->session_start(core_if->hcd_cb->p);
++        }
++}
++
++/** Start the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_start(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->pcd_cb && core_if->pcd_cb->start) {
++                core_if->pcd_cb->start(core_if->pcd_cb->p);
++        }
++}
++/** Stop the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_stop(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->pcd_cb && core_if->pcd_cb->stop) {
++                core_if->pcd_cb->stop(core_if->pcd_cb->p);
++        }
++}
++/** Suspend the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_suspend(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
++                core_if->pcd_cb->suspend(core_if->pcd_cb->p);
++        }
++}
++/** Resume the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_resume(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++                core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++        }
++}
++
++/**
++ * This function handles the OTG Interrupts. It reads the OTG
++ * Interrupt Register (GOTGINT) to determine what interrupt has
++ * occurred.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs =
++                core_if->core_global_regs;
++	gotgint_data_t gotgint;
++        gotgctl_data_t gotgctl;
++	gintmsk_data_t gintmsk;
++
++	gotgint.d32 = dwc_read_reg32(&global_regs->gotgint);
++        gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++        DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32);
++
++	if (gotgint.b.sesenddet) {
++		DWC_DEBUGPL(DBG_ANY, "OTG Interrupt: "
++			    "Session End Detected++ (%s)\n",
++                            op_state_str(core_if));
++                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++
++                if (core_if->op_state == B_HOST) {
++                        pcd_start(core_if);
++                        core_if->op_state = B_PERIPHERAL;
++                } else {
++                        /* If not B_HOST and Device HNP still set. HNP
++                         * Did not succeed!*/
++                        if (gotgctl.b.devhnpen) {
++                                DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
++                                DWC_ERROR("Device Not Connected/Responding!\n");
++                        }
++
++                        /* If Session End Detected the B-Cable has
++                         * been disconnected. */
++                        /* Reset PCD and Gadget driver to a
++                         * clean state. */
++                        pcd_stop(core_if);
++                }
++                gotgctl.d32 = 0;
++                gotgctl.b.devhnpen = 1;
++                dwc_modify_reg32(&global_regs->gotgctl,
++                                  gotgctl.d32, 0);
++        }
++	if (gotgint.b.sesreqsucstschng) {
++		DWC_DEBUGPL(DBG_ANY, " OTG Interrupt: "
++			    "Session Reqeust Success Status Change++\n");
++                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++                if (gotgctl.b.sesreqscs) {
++			if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++			    (core_if->core_params->i2c_enable)) {
++				core_if->srp_success = 1;
++			}
++			else {
++				pcd_resume(core_if);
++				/* Clear Session Request */
++				gotgctl.d32 = 0;
++				gotgctl.b.sesreq = 1;
++				dwc_modify_reg32(&global_regs->gotgctl,
++						  gotgctl.d32, 0);
++			}
++                }
++	}
++	if (gotgint.b.hstnegsucstschng) {
++                /* Print statements during the HNP interrupt handling
++                 * can cause it to fail.*/
++                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++                if (gotgctl.b.hstnegscs) {
++                        if (dwc_otg_is_host_mode(core_if)) {
++                                core_if->op_state = B_HOST;
++				/*
++				 * Need to disable SOF interrupt immediately.
++				 * When switching from device to host, the PCD
++				 * interrupt handler won't handle the
++				 * interrupt if host mode is already set. The
++				 * HCD interrupt handler won't get called if
++				 * the HCD state is HALT. This means that the
++				 * interrupt does not get handled and Linux
++				 * complains loudly.
++				 */
++				gintmsk.d32 = 0;
++				gintmsk.b.sofintr = 1;
++				dwc_modify_reg32(&global_regs->gintmsk,
++						 gintmsk.d32, 0);
++                                pcd_stop(core_if);
++                                /*
++                                 * Initialize the Core for Host mode.
++                                 */
++                                hcd_start(core_if);
++                                core_if->op_state = B_HOST;
++                        }
++                } else {
++                        gotgctl.d32 = 0;
++                        gotgctl.b.hnpreq = 1;
++                        gotgctl.b.devhnpen = 1;
++                        dwc_modify_reg32(&global_regs->gotgctl,
++                                          gotgctl.d32, 0);
++                        DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
++                        DWC_ERROR("Device Not Connected/Responding\n");
++                }
++	}
++	if (gotgint.b.hstnegdet) {
++                /* The disconnect interrupt is set at the same time as
++		 * Host Negotiation Detected.  During the mode
++		 * switch all interrupts are cleared so the disconnect
++		 * interrupt handler will not get executed.
++                 */
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Host Negotiation Detected++ (%s)\n",
++                            (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
++                if (dwc_otg_is_device_mode(core_if)){
++                	DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", core_if->op_state);
++                        hcd_disconnect(core_if);
++                        pcd_start(core_if);
++                        core_if->op_state = A_PERIPHERAL;
++                } else {
++			/*
++			 * Need to disable SOF interrupt immediately. When
++			 * switching from device to host, the PCD interrupt
++			 * handler won't handle the interrupt if host mode is
++			 * already set. The HCD interrupt handler won't get
++			 * called if the HCD state is HALT. This means that
++			 * the interrupt does not get handled and Linux
++			 * complains loudly.
++			 */
++			gintmsk.d32 = 0;
++			gintmsk.b.sofintr = 1;
++			dwc_modify_reg32(&global_regs->gintmsk,
++					 gintmsk.d32, 0);
++                        pcd_stop(core_if);
++                        hcd_start(core_if);
++                        core_if->op_state = A_HOST;
++                }
++	}
++	if (gotgint.b.adevtoutchng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "A-Device Timeout Change++\n");
++	}
++	if (gotgint.b.debdone) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Debounce Done++\n");
++	}
++
++	/* Clear GOTGINT */
++	dwc_write_reg32 (&core_if->core_global_regs->gotgint, gotgint.d32);
++
++	return 1;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++
++void w_conn_id_status_change(void *p)
++{
++	dwc_otg_core_if_t *core_if = p;
++
++#else
++
++void w_conn_id_status_change(struct work_struct *p)
++{
++	dwc_otg_core_if_t *core_if = container_of(p, dwc_otg_core_if_t, w_conn_id);
++
++#endif
++
++
++	uint32_t count = 0;
++        gotgctl_data_t gotgctl = { .d32 = 0 };
++
++        gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
++
++        /* B-Device connector (Device Mode) */
++        if (gotgctl.b.conidsts) {
++                /* Wait for switch to device mode. */
++                while (!dwc_otg_is_device_mode(core_if)){
++                        DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
++                                  (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
++                        MDELAY(100);
++                        if (++count > 10000) *(uint32_t*)NULL=0;
++                }
++                core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++                pcd_start(core_if);
++        } else {
++                /* A-Device connector (Host Mode) */
++                while (!dwc_otg_is_host_mode(core_if)) {
++                        DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
++                                  (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
++                        MDELAY(100);
++                        if (++count > 10000) *(uint32_t*)NULL=0;
++                }
++                core_if->op_state = A_HOST;
++                /*
++                 * Initialize the Core for Host mode.
++                 */
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++                hcd_start(core_if);
++        }
++}
++
++
++/**
++ * This function handles the Connector ID Status Change Interrupt.  It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition.
++ *
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *core_if)
++{
++
++	/*
++	 * Need to disable SOF interrupt immediately. If switching from device
++	 * to host, the PCD interrupt handler won't handle the interrupt if
++	 * host mode is already set. The HCD interrupt handler won't get
++	 * called if the HCD state is HALT. This means that the interrupt does
++	 * not get handled and Linux complains loudly.
++	 */
++	gintmsk_data_t gintmsk = { .d32 = 0 };
++	gintsts_data_t gintsts = { .d32 = 0 };
++
++	gintmsk.b.sofintr = 1;
++	dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++	DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++  (%s)\n",
++                    (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
++
++	/*
++	 * Need to schedule a work, as there are possible DELAY function calls
++ 	*/
++	queue_work(core_if->wq_otg, &core_if->w_conn_id);
++
++	/* Set flag and clear interrupt */
++	gintsts.b.conidstschng = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t *core_if)
++{
++	gintsts_data_t gintsts;
++
++#ifndef DWC_HOST_ONLY
++        hprt0_data_t hprt0;
++	DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
++
++        if (dwc_otg_is_device_mode(core_if)) {
++                DWC_PRINT("SRP: Device mode\n");
++        } else {
++		DWC_PRINT("SRP: Host mode\n");
++
++		/* Turn on the port power bit. */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtpwr = 1;
++		dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++		/* Start the Connection timer. So a message can be displayed
++		 * if connect does not occur within 10 seconds. */
++		hcd_session_start(core_if);
++        }
++#endif
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.sessreqintr = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++void w_wakeup_detected(void *p)
++{
++	dwc_otg_core_if_t* core_if = p;
++
++#else
++
++void w_wakeup_detected(struct work_struct *p)
++{
++	struct delayed_work *dw = container_of(p, struct delayed_work, work);
++	dwc_otg_core_if_t *core_if = container_of(dw, dwc_otg_core_if_t, w_wkp);
++
++#endif
++        /*
++	 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++	 * so that OPT tests pass with all PHYs).
++	 */
++        hprt0_data_t hprt0 = {.d32=0};
++#if 0
++	pcgcctl_data_t pcgcctl = {.d32=0};
++        /* Restart the Phy Clock */
++        pcgcctl.b.stoppclk = 1;
++        dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
++        UDELAY(10);
++#endif //0
++        hprt0.d32 = dwc_otg_read_hprt0(core_if);
++        DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
++//      MDELAY(70);
++        hprt0.b.prtres = 0; /* Resume */
++        dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++        DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(core_if->host_if->hprt0));
++}
++/**
++ * This interrupt indicates that the DWC_otg controller has detected a
++ * resume or remote wakeup sequence. If the DWC_otg controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t *core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++        if (dwc_otg_is_device_mode(core_if)) {
++                dctl_data_t dctl = {.d32=0};
++                DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
++                            dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts));
++#ifdef PARTIAL_POWER_DOWN
++                if (core_if->hwcfg4.b.power_optimiz) {
++                        pcgcctl_data_t power = {.d32=0};
++
++                        power.d32 = dwc_read_reg32(core_if->pcgcctl);
++                        DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
++
++                        power.b.stoppclk = 0;
++                        dwc_write_reg32(core_if->pcgcctl, power.d32);
++
++                        power.b.pwrclmp = 0;
++                        dwc_write_reg32(core_if->pcgcctl, power.d32);
++
++                        power.b.rstpdwnmodule = 0;
++                        dwc_write_reg32(core_if->pcgcctl, power.d32);
++                }
++#endif
++                /* Clear the Remote Wakeup Signalling */
++                dctl.b.rmtwkupsig = 1;
++                dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
++                                  dctl.d32, 0);
++
++                if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++                        core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++                }
++
++        } else {
++		pcgcctl_data_t pcgcctl = {.d32=0};
++
++		/* Restart the Phy Clock */
++	        pcgcctl.b.stoppclk = 1;
++	        dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
++
++	        queue_delayed_work(core_if->wq_otg, &core_if->w_wkp, ((70 * HZ / 1000) + 1));
++        }
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.wkupintr = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that a device has been disconnected from
++ * the root port.
++ */
++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t *core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
++                    (dwc_otg_is_host_mode(core_if)?"Host":"Device"),
++                    op_state_str(core_if));
++
++/** @todo Consolidate this if statement. */
++#ifndef DWC_HOST_ONLY
++        if (core_if->op_state == B_HOST) {
++                /* If in device mode Disconnect and stop the HCD, then
++                 * start the PCD. */
++                hcd_disconnect(core_if);
++                pcd_start(core_if);
++                core_if->op_state = B_PERIPHERAL;
++        } else if (dwc_otg_is_device_mode(core_if)) {
++                gotgctl_data_t gotgctl = { .d32 = 0 };
++                gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
++                if (gotgctl.b.hstsethnpen==1) {
++                        /* Do nothing, if HNP in process the OTG
++                         * interrupt "Host Negotiation Detected"
++                         * interrupt will do the mode switch.
++                         */
++                } else if (gotgctl.b.devhnpen == 0) {
++                        /* If in device mode Disconnect and stop the HCD, then
++                         * start the PCD. */
++                        hcd_disconnect(core_if);
++                        pcd_start(core_if);
++                        core_if->op_state = B_PERIPHERAL;
++                } else {
++                        DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
++                }
++        } else {
++                if (core_if->op_state == A_HOST) {
++                        /* A-Cable still connected but device disconnected. */
++                        hcd_disconnect(core_if);
++                }
++        }
++#endif
++
++	gintsts.d32 = 0;
++	gintsts.b.disconnect = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++/**
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ *
++ * For HNP the USB Suspend interrupt signals the change from
++ * "a_peripheral" to "a_host".
++ *
++ * When power management is enabled the core will be put in low power
++ * mode.
++ */
++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *core_if)
++{
++        dsts_data_t dsts;
++        gintsts_data_t gintsts;
++
++        DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
++
++        if (dwc_otg_is_device_mode(core_if)) {
++                /* Check the Device status register to determine if the Suspend
++                 * state is active. */
++                dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++                DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
++                DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
++                            "HWCFG4.power Optimize=%d\n",
++                            dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
++
++
++#ifdef PARTIAL_POWER_DOWN
++/** @todo Add a module parameter for power management. */
++
++                if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
++                        pcgcctl_data_t power = {.d32=0};
++                        DWC_DEBUGPL(DBG_CIL, "suspend\n");
++
++                        power.b.pwrclmp = 1;
++                        dwc_write_reg32(core_if->pcgcctl, power.d32);
++
++                        power.b.rstpdwnmodule = 1;
++                        dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
++
++                        power.b.stoppclk = 1;
++                        dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
++
++                } else {
++                        DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
++                }
++#endif
++                /* PCD callback for suspend. */
++                pcd_suspend(core_if);
++        } else {
++                if (core_if->op_state == A_PERIPHERAL) {
++                        DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
++                        /* Clear the a_peripheral flag, back to a_host. */
++                        pcd_stop(core_if);
++                        hcd_start(core_if);
++                        core_if->op_state = A_HOST;
++                }
++        }
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbsuspend = 1;
++	dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++        return 1;
++}
++
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *core_if)
++{
++        gintsts_data_t gintsts;
++        gintmsk_data_t gintmsk;
++        gintmsk_data_t gintmsk_common = {.d32=0};
++	gintmsk_common.b.wkupintr = 1;
++	gintmsk_common.b.sessreqintr = 1;
++	gintmsk_common.b.conidstschng = 1;
++	gintmsk_common.b.otgintr = 1;
++	gintmsk_common.b.modemismatch = 1;
++        gintmsk_common.b.disconnect = 1;
++        gintmsk_common.b.usbsuspend = 1;
++        /** @todo: The port interrupt occurs while in device
++         * mode. Added code to CIL to clear the interrupt for now!
++         */
++        gintmsk_common.b.portintr = 1;
++
++        gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts);
++        gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk);
++#ifdef DEBUG
++        /* if any common interrupts set */
++        if (gintsts.d32 & gintmsk_common.d32) {
++                DWC_DEBUGPL(DBG_ANY, "gintsts=%08x  gintmsk=%08x\n",
++                            gintsts.d32, gintmsk.d32);
++        }
++#endif
++
++        return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
++
++}
++
++/**
++ * Common interrupt handler.
++ *
++ * The common interrupts are those that occur in both Host and Device mode.
++ * This handler handles the following interrupts:
++ * - Mode Mismatch Interrupt
++ * - Disconnect Interrupt
++ * - OTG Interrupt
++ * - Connector ID Status Change Interrupt
++ * - Session Request Interrupt.
++ * - Resume / Remote Wakeup Detected Interrupt.
++ *
++ */
++int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t *core_if)
++{
++	int retval = 0;
++        gintsts_data_t gintsts;
++
++        gintsts.d32 = dwc_otg_read_common_intr(core_if);
++
++        if (gintsts.b.modemismatch) {
++                retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
++        }
++        if (gintsts.b.otgintr) {
++                retval |= dwc_otg_handle_otg_intr(core_if);
++        }
++        if (gintsts.b.conidstschng) {
++                retval |= dwc_otg_handle_conn_id_status_change_intr(core_if);
++        }
++        if (gintsts.b.disconnect) {
++                retval |= dwc_otg_handle_disconnect_intr(core_if);
++        }
++        if (gintsts.b.sessreqintr) {
++                retval |= dwc_otg_handle_session_req_intr(core_if);
++        }
++        if (gintsts.b.wkupintr) {
++                retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
++        }
++        if (gintsts.b.usbsuspend) {
++                retval |= dwc_otg_handle_usb_suspend_intr(core_if);
++        }
++        if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
++                /* The port interrupt occurs while in device mode with HPRT0
++                 * Port Enable/Disable.
++                 */
++                gintsts.d32 = 0;
++                gintsts.b.portintr = 1;
++                dwc_write_reg32(&core_if->core_global_regs->gintsts,
++                                gintsts.d32);
++                retval |= 1;
++
++        }
++
++	S3C2410X_CLEAR_EINTPEND();
++
++        return retval;
++}
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
+@@ -0,0 +1,1273 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $
++ * $Revision: 1.7 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 791271 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ * The dwc_otg_driver module provides the initialization and cleanup entry
++ * points for the DWC_otg driver. This module will be dynamically installed
++ * after Linux is booted using the insmod command. When the module is
++ * installed, the dwc_otg_driver_init function is called. When the module is
++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
++ *
++ * This module also defines a data structure for the dwc_otg_driver, which is
++ * used in conjunction with the standard ARM platform_device structure. These
++ * structures allow the OTG driver to comply with the standard Linux driver
++ * model in which devices and drivers are registered with a bus driver. This
++ * has the benefit that Linux can expose attributes of the driver and device
++ * in its special sysfs file system. Users can then read or write files in
++ * this file system to perform diagnostics on the driver components or the
++ * device.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h>	 /* permission constants */
++#include <linux/version.h>
++#include <linux/platform_device.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++# include <linux/irq.h>
++#endif
++
++#include <asm/io.h>
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++# include <asm/irq.h>
++#endif
++
++#include "linux/dwc_otg_plat.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_hcd.h"
++
++#define DWC_DRIVER_VERSION	"2.72a 24-JUN-2008"
++#define DWC_DRIVER_DESC		"HS OTG USB Controller driver"
++
++static const char dwc_driver_name[] = "dwc_otg";
++
++/*-------------------------------------------------------------------------*/
++/* Encapsulate the module parameter settings */
++
++static dwc_otg_core_params_t dwc_otg_module_params = {
++	.opt = -1,
++	.otg_cap = -1,
++	.dma_enable = -1,
++	.dma_desc_enable = -1,
++	.dma_burst_size = -1,
++	.speed = -1,
++	.host_support_fs_ls_low_power = -1,
++	.host_ls_low_power_phy_clk = -1,
++	.enable_dynamic_fifo = -1,
++	.data_fifo_size = -1,
++	.dev_rx_fifo_size = -1,
++	.dev_nperio_tx_fifo_size = -1,
++	.dev_perio_tx_fifo_size = {
++		/* dev_perio_tx_fifo_size_1 */
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1
++		/* 15 */
++	},
++	.host_rx_fifo_size = -1,
++	.host_nperio_tx_fifo_size = -1,
++	.host_perio_tx_fifo_size = -1,
++	.max_transfer_size = -1,
++	.max_packet_count = -1,
++	.host_channels = -1,
++	.dev_endpoints = -1,
++	.phy_type = -1,
++	.phy_utmi_width = -1,
++	.phy_ulpi_ddr = -1,
++	.phy_ulpi_ext_vbus = -1,
++	.i2c_enable = -1,
++	.ulpi_fs_ls = -1,
++	.ts_dline = -1,
++	.en_multiple_tx_fifo = -1,
++	.dev_tx_fifo_size = {
++		/* dev_tx_fifo_size */
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1
++		/* 15 */
++	},
++	.thr_ctl = -1,
++	.tx_thr_length = -1,
++	.rx_thr_length = -1,
++	.pti_enable = -1,
++	.mpi_enable = -1,
++};
++
++/**
++ * This function shows the Driver Version.
++ */
++static ssize_t version_show(struct device_driver *dev, char *buf)
++{
++	return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2, "%s\n",
++			DWC_DRIVER_VERSION);
++}
++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
++
++/**
++ * Global Debug Level Mask.
++ */
++uint32_t g_dbg_lvl = 0; /* OFF */
++
++/**
++ * This function shows the driver Debug Level.
++ */
++static ssize_t dbg_level_show(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%0x\n", g_dbg_lvl);
++}
++
++/**
++ * This function stores the driver Debug Level.
++ */
++static ssize_t dbg_level_store(struct device_driver *drv, const char *buf,
++			       size_t count)
++{
++	g_dbg_lvl = simple_strtoul(buf, NULL, 16);
++		return count;
++}
++static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store);
++
++/**
++ * This function is called during module intialization to verify that
++ * the module parameters are in a valid state.
++ */
++static int check_parameters(dwc_otg_core_if_t *core_if)
++{
++	int i;
++	int retval = 0;
++
++/* Checks if the parameter is outside of its valid range of values */
++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
++		((dwc_otg_module_params._param_ < (_low_)) || \
++		(dwc_otg_module_params._param_ > (_high_)))
++
++/* If the parameter has been set by the user, check that the parameter value is
++ * within the value range of values.  If not, report a module error. */
++#define DWC_OTG_PARAM_ERR(_param_, _low_, _high_, _string_) \
++		do { \
++			if (dwc_otg_module_params._param_ != -1) { \
++				if (DWC_OTG_PARAM_TEST(_param_, (_low_), (_high_))) { \
++					DWC_ERROR("`%d' invalid for parameter `%s'\n", \
++						  dwc_otg_module_params._param_, _string_); \
++					dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++					retval++; \
++				} \
++			} \
++		} while (0)
++
++	DWC_OTG_PARAM_ERR(opt,0,1,"opt");
++	DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
++	DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
++	DWC_OTG_PARAM_ERR(dma_desc_enable,0,1,"dma_desc_enable");
++	DWC_OTG_PARAM_ERR(speed,0,1,"speed");
++	DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
++	DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
++	DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
++	DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
++	DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
++	DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
++	DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
++	DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
++	DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
++	DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
++	DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
++	DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
++	DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
++	DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
++	DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
++
++	if (dwc_otg_module_params.dma_burst_size != -1) {
++		if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) {
++			DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
++				  dwc_otg_module_params.dma_burst_size);
++			dwc_otg_module_params.dma_burst_size = 32;
++			retval++;
++		}
++
++		{
++			uint8_t brst_sz = 0;
++			while(dwc_otg_module_params.dma_burst_size > 1) {
++				brst_sz ++;
++				dwc_otg_module_params.dma_burst_size >>= 1;
++			}
++			dwc_otg_module_params.dma_burst_size = brst_sz;
++		}
++	}
++
++	if (dwc_otg_module_params.phy_utmi_width != -1) {
++		if (DWC_OTG_PARAM_TEST(phy_utmi_width, 8, 8) &&
++		    DWC_OTG_PARAM_TEST(phy_utmi_width, 16, 16)) {
++			DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
++				  dwc_otg_module_params.phy_utmi_width);
++			dwc_otg_module_params.phy_utmi_width = 16;
++			retval++;
++		}
++	}
++
++	for (i = 0; i < 15; i++) {
++		/** @todo should be like above */
++		//DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i], 4, 768, "dev_perio_tx_fifo_size");
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
++			if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i], 4, 768)) {
++				DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++					  dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
++				dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++				retval++;
++			}
++		}
++	}
++
++	DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
++
++	for (i = 0; i < 15; i++) {
++		/** @todo should be like above */
++		//DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i], 4, 768, "dev_tx_fifo_size");
++		if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
++			if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
++				DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++					  dwc_otg_module_params.dev_tx_fifo_size[i], "dev_tx_fifo_size", i);
++				dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
++				retval++;
++			}
++		}
++	}
++
++	DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
++	DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
++	DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
++
++	DWC_OTG_PARAM_ERR(pti_enable,0,1,"pti_enable");
++	DWC_OTG_PARAM_ERR(mpi_enable,0,1,"mpi_enable");
++
++	/* At this point, all module parameters that have been set by the user
++	 * are valid, and those that have not are left unset.  Now set their
++	 * default values and/or check the parameters against the hardware
++	 * configurations of the OTG core. */
++
++/* This sets the parameter to the default value if it has not been set by the
++ * user */
++#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
++	({ \
++		int changed = 1; \
++		if (dwc_otg_module_params._param_ == -1) { \
++			changed = 0; \
++			dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++		} \
++		changed; \
++	})
++
++/* This checks the macro agains the hardware configuration to see if it is
++ * valid.  It is possible that the default value could be invalid. In this
++ * case, it will report a module error if the user touched the parameter.
++ * Otherwise it will adjust the value without any error. */
++#define DWC_OTG_PARAM_CHECK_VALID(_param_, _str_, _is_valid_, _set_valid_) \
++	({ \
++		int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
++		int error = 0; \
++		if (!(_is_valid_)) { \
++			if (changed) { \
++				DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \
++				error = 1; \
++			} \
++			dwc_otg_module_params._param_ = (_set_valid_); \
++		} \
++		error; \
++	})
++
++	/* OTG Cap */
++	retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap, "otg_cap",
++				({
++					int valid;
++					valid = 1;
++					switch (dwc_otg_module_params.otg_cap) {
++					case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
++						if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++							valid = 0;
++						break;
++					case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
++						if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
++						    (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
++						    (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
++						    (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
++							valid = 0;
++						}
++						break;
++					case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
++						/* always valid */
++						break;
++					}
++					valid;
++				}),
++				(((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
++				  (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
++				  (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
++				  (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
++				 DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
++				 DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable, "dma_enable",
++				((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1,
++				0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dma_desc_enable, "dma_desc_enable",
++				((dwc_otg_module_params.dma_desc_enable == 1) &&
++				 ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.desc_dma == 0))) ? 0 : 1,
++				0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(opt, "opt", 1, 0);
++
++	DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
++				"host_support_fs_ls_low_power",
++				1, 0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
++					"enable_dynamic_fifo",
++					((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
++					(core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
++					"data_fifo_size",
++					(dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
++					core_if->hwcfg3.b.dfifo_depth);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
++					"dev_rx_fifo_size",
++					(dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++					dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
++					"dev_nperio_tx_fifo_size",
++					(dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++					(dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
++					"host_rx_fifo_size",
++					(dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++					dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
++					"host_nperio_tx_fifo_size",
++					(dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++					(dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
++					"host_perio_tx_fifo_size",
++					(dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
++					((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
++					"max_transfer_size",
++					(dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
++					((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
++					"max_packet_count",
++					(dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
++					((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
++					"host_channels",
++					(dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
++					(core_if->hwcfg2.b.num_host_chan + 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
++					"dev_endpoints",
++					(dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
++					core_if->hwcfg2.b.num_dev_ep);
++
++/*
++ * Define the following to disable the FS PHY Hardware checking.  This is for
++ * internal testing only.
++ *
++ * #define NO_FS_PHY_HW_CHECKS
++ */
++
++#ifdef NO_FS_PHY_HW_CHECKS
++	retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++				"phy_type", 1, 0);
++#else
++	retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++				"phy_type",
++				({
++					int valid = 0;
++					if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
++					((core_if->hwcfg2.b.hs_phy_type == 1) ||
++					 (core_if->hwcfg2.b.hs_phy_type == 3))) {
++						valid = 1;
++					}
++					else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
++						 ((core_if->hwcfg2.b.hs_phy_type == 2) ||
++						  (core_if->hwcfg2.b.hs_phy_type == 3))) {
++						valid = 1;
++					}
++					else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++						 (core_if->hwcfg2.b.fs_phy_type == 1)) {
++						valid = 1;
++					}
++					valid;
++				}),
++				({
++					int set = DWC_PHY_TYPE_PARAM_FS;
++					if (core_if->hwcfg2.b.hs_phy_type) {
++						if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
++						(core_if->hwcfg2.b.hs_phy_type == 1)) {
++							set = DWC_PHY_TYPE_PARAM_UTMI;
++						}
++						else {
++							set = DWC_PHY_TYPE_PARAM_ULPI;
++						}
++					}
++					set;
++				}));
++#endif
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(speed, "speed",
++				(dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
++				dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
++				"host_ls_low_power_phy_clk",
++				((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
++				((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
++
++	DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
++	DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
++	DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
++	DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
++	DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
++
++#ifdef NO_FS_PHY_HW_CHECKS
++	retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, "i2c_enable", 1, 0);
++#else
++	retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
++				"i2c_enable",
++				(dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
++				0);
++#endif
++
++	for (i = 0; i < 15; i++) {
++		int changed = 1;
++		int error = 0;
++
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
++			changed = 0;
++			dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++		}
++		if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++			if (changed) {
++				DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i);
++				error = 1;
++			}
++			dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++		}
++		retval += error;
++	}
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, "en_multiple_tx_fifo",
++						((dwc_otg_module_params.en_multiple_tx_fifo == 1) && (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1,
++						0);
++
++	for (i = 0; i < 15; i++) {
++		int changed = 1;
++		int error = 0;
++
++		if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
++			changed = 0;
++			dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
++		}
++		if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++			if (changed) {
++				DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i);
++				error = 1;
++			}
++			dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++		}
++		retval += error;
++	}
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(thr_ctl, "thr_ctl",
++				((dwc_otg_module_params.thr_ctl != 0) && ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.ded_fifo_en == 0))) ? 0 : 1,
++				0);
++
++	DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
++	DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(pti_enable, "pti_enable",
++		((dwc_otg_module_params.pti_enable == 0) || ((dwc_otg_module_params.pti_enable == 1) && (core_if->snpsid >= 0x4F54272A))) ? 1 : 0,
++			0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(mpi_enable, "mpi_enable",
++			((dwc_otg_module_params.mpi_enable == 0) || ((dwc_otg_module_params.mpi_enable == 1) && (core_if->hwcfg2.b.multi_proc_int == 1))) ? 1 : 0,
++			0);
++	return retval;
++}
++
++/**
++ * This function is the top level interrupt handler for the Common
++ * (Device and host modes) interrupts.
++ */
++static irqreturn_t dwc_otg_common_irq(int irq, void *dev
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++				      , struct pt_regs *r
++#endif
++				     )
++{
++	dwc_otg_device_t *otg_dev = dev;
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_handle_common_intr(otg_dev->core_if);
++	return IRQ_RETVAL(retval);
++}
++
++/**
++ * This function is called when a platform_device is unregistered with the
++ * dwc_otg_driver. This happens, for example, when the rmmod command is
++ * executed. The device may or may not be electrically present. If it is
++ * present, the driver stops device processing. Any resources used on behalf
++ * of this device are freed.
++ *
++ * @param[in] pdev
++ */
++static int dwc_otg_driver_remove(struct platform_device *pdev)
++{
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
++	DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, pdev);
++
++	if (!otg_dev) {
++		/* Memory allocation for the dwc_otg_device failed. */
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++		return 0;
++	}
++
++	/*
++	 * Free the IRQ
++	 */
++	if (otg_dev->common_irq_installed) {
++		free_irq(otg_dev->irq, otg_dev);
++	}
++
++#ifndef DWC_DEVICE_ONLY
++	if (otg_dev->hcd) {
++		dwc_otg_hcd_remove(&pdev->dev);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++		return 0;
++	}
++#endif
++
++#ifndef DWC_HOST_ONLY
++	if (otg_dev->pcd) {
++		dwc_otg_pcd_remove(&pdev->dev);
++	}
++#endif
++	if (otg_dev->core_if) {
++		dwc_otg_cil_remove(otg_dev->core_if);
++	}
++
++	/*
++	 * Remove the device attributes
++	 */
++	dwc_otg_attr_remove(otg_dev->parent);
++
++	/* Disable USB port */
++	dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0xf);
++
++	/*
++	 * Return the memory.
++	 */
++	if (otg_dev->base) {
++		iounmap(otg_dev->base);
++	}
++
++	if (otg_dev->phys_addr != 0) {
++		release_mem_region(otg_dev->phys_addr, otg_dev->base_len);
++	}
++
++	kfree(otg_dev);
++
++	/*
++	 * Clear the drvdata pointer.
++	 */
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++/**
++ * This function is called when an platform_device is bound to a
++ * dwc_otg_driver. It creates the driver components required to
++ * control the device (CIL, HCD, and PCD) and it initializes the
++ * device. The driver components are stored in a dwc_otg_device
++ * structure. A reference to the dwc_otg_device is saved in the
++ * platform_device. This allows the driver to access the dwc_otg_device
++ * structure on subsequent calls to driver methods for this device.
++ *
++ * @param[in] pdev  platform_device definition
++ */
++static int dwc_otg_driver_probe(struct platform_device *pdev)
++{
++	int retval = 0;
++	uint32_t snpsid;
++	dwc_otg_device_t *otg_dev;
++	struct resource *res;
++
++	dev_dbg(&pdev->dev, "dwc_otg_driver_probe(%p)\n", pdev);
++
++	otg_dev= kzalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
++	if (!otg_dev) {
++		dev_err(&pdev->dev, "kmalloc of dwc_otg_device failed\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++
++	otg_dev->reg_offset = 0xFFFFFFFF;
++
++	/*
++	 * Retrieve the memory and IRQ resources.
++	 */
++	otg_dev->irq = platform_get_irq(pdev, 0);
++	if (otg_dev->irq <= 0) {
++		dev_err(&pdev->dev, "no device irq\n");
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (res == NULL) {
++		dev_err(&pdev->dev, "no CSR address\n");
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	otg_dev->parent = &pdev->dev;
++	otg_dev->phys_addr = res->start;
++	otg_dev->base_len = res->end - res->start + 1;
++	if (request_mem_region(otg_dev->phys_addr,
++			       otg_dev->base_len,
++			       dwc_driver_name) == NULL) {
++		dev_err(&pdev->dev, "request_mem_region failed\n");
++		retval = -EBUSY;
++		goto fail;
++	}
++
++	/*
++	 * Map the DWC_otg Core memory into virtual address space.
++	 */
++	otg_dev->base = ioremap(otg_dev->phys_addr, otg_dev->base_len);
++	if (!otg_dev->base) {
++		dev_err(&pdev->dev, "ioremap() failed\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++	dev_dbg(&pdev->dev, "mapped base=0x%08x\n", (unsigned) otg_dev->base);
++
++	/* Enable USB Port */
++	dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0);
++
++	/*
++	 * Attempt to ensure this device is really a DWC_otg Controller.
++	 * Read and verify the SNPSID register contents. The value should be
++	 * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
++	 */
++	snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0x40));
++
++	if ((snpsid & 0xFFFFF000) != OTG_CORE_REV_2_00) {
++		dev_err(&pdev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	DWC_PRINT("Core Release: %x.%x%x%x\n",
++			(snpsid >> 12 & 0xF),
++			(snpsid >> 8 & 0xF),
++			(snpsid >> 4 & 0xF),
++			(snpsid & 0xF));
++
++	/*
++	 * Initialize driver data to point to the global DWC_otg
++	 * Device structure.
++	 */
++	platform_set_drvdata(pdev, otg_dev);
++	dev_dbg(&pdev->dev, "dwc_otg_device=0x%p\n", otg_dev);
++
++
++	otg_dev->core_if = dwc_otg_cil_init(otg_dev->base,
++						   &dwc_otg_module_params);
++
++	otg_dev->core_if->snpsid = snpsid;
++
++	if (!otg_dev->core_if) {
++		dev_err(&pdev->dev, "CIL initialization failed!\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++
++	/*
++	 * Validate parameter values.
++	 */
++	if (check_parameters(otg_dev->core_if)) {
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	/*
++	 * Create Device Attributes in sysfs
++	 */
++	dwc_otg_attr_create(&pdev->dev);
++
++	/*
++	 * Disable the global interrupt until all the interrupt
++	 * handlers are installed.
++	 */
++	dwc_otg_disable_global_interrupts(otg_dev->core_if);
++
++	/*
++	 * Install the interrupt handler for the common interrupts before
++	 * enabling common interrupts in core_init below.
++	 */
++	DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n",
++		    otg_dev->irq);
++	retval = request_irq(otg_dev->irq, dwc_otg_common_irq,
++			     IRQF_SHARED, "dwc_otg", otg_dev);
++	if (retval) {
++		DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
++		retval = -EBUSY;
++		goto fail;
++	} else {
++		otg_dev->common_irq_installed = 1;
++	}
++
++	/*
++	 * Initialize the DWC_otg core.
++	 */
++	dwc_otg_core_init(otg_dev->core_if);
++
++#ifndef DWC_HOST_ONLY
++	/*
++	 * Initialize the PCD
++	 */
++	retval = dwc_otg_pcd_init(&pdev->dev);
++	if (retval != 0) {
++		DWC_ERROR("dwc_otg_pcd_init failed\n");
++		otg_dev->pcd = NULL;
++		goto fail;
++	}
++#endif
++#ifndef DWC_DEVICE_ONLY
++	/*
++	 * Initialize the HCD
++	 */
++	retval = dwc_otg_hcd_init(&pdev->dev);
++	if (retval != 0) {
++		DWC_ERROR("dwc_otg_hcd_init failed\n");
++		otg_dev->hcd = NULL;
++		goto fail;
++	}
++#endif
++
++	/*
++	 * Enable the global interrupt after all the interrupt
++	 * handlers are installed.
++	 */
++	dwc_otg_enable_global_interrupts(otg_dev->core_if);
++
++	return 0;
++
++ fail:
++	dwc_otg_driver_remove(pdev);
++	return retval;
++}
++
++/**
++ * This structure defines the methods to be called by a bus driver
++ * during the lifecycle of a device on that bus. Both drivers and
++ * devices are registered with a bus driver. The bus driver matches
++ * devices to drivers based on information in the device and driver
++ * structures.
++ *
++ * The probe function is called when the bus driver matches a device
++ * to this driver. The remove function is called when a device is
++ * unregistered with the bus driver.
++ */
++
++static const struct of_device_id ralink_otg_match[] = {
++	{ .compatible = "ralink,rt3050-otg" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ralink_otg_match);
++
++static struct platform_driver dwc_otg_driver = {
++	.driver = {
++		.name	= (char *)dwc_driver_name,
++		.of_match_table = ralink_otg_match,
++	},
++	.probe		= dwc_otg_driver_probe,
++	.remove		= dwc_otg_driver_remove,
++};
++
++/**
++ * This function is called when the dwc_otg_driver is installed with the
++ * insmod command. It registers the dwc_otg_driver structure with the
++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
++ * to be called. In addition, the bus driver will automatically expose
++ * attributes defined for the device and driver in the special sysfs file
++ * system.
++ *
++ * @return
++ */
++static int __init dwc_otg_driver_init(void)
++{
++	int retval = 0;
++	int error;
++
++	printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
++
++	retval = platform_driver_register(&dwc_otg_driver);
++	if (retval) {
++		printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++		return retval;
++	}
++
++	error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version);
++	error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++
++	return retval;
++}
++module_init(dwc_otg_driver_init);
++
++/**
++ * This function is called when the driver is removed from the kernel
++ * with the rmmod command. The driver unregisters itself with its bus
++ * driver.
++ *
++ */
++static void __exit dwc_otg_driver_cleanup(void)
++{
++	printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n");
++
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++
++	platform_driver_unregister(&dwc_otg_driver);
++
++	printk(KERN_INFO "%s module removed\n", dwc_driver_name);
++}
++module_exit(dwc_otg_driver_cleanup);
++
++MODULE_DESCRIPTION(DWC_DRIVER_DESC);
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE("GPL");
++
++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
++module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
++MODULE_PARM_DESC(opt, "OPT Mode");
++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
++
++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, 0444);
++MODULE_PARM_DESC(dma_desc_enable, "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
++
++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
++MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
++module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
++MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
++module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
++MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
++module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
++MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
++/** @todo Set the max to 512K, modify checks */
++MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
++MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
++MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
++MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
++module_param_named(debug, g_dbg_lvl, int, 0444);
++MODULE_PARM_DESC(debug, "");
++
++module_param_named(en_multiple_tx_fifo, dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
++MODULE_PARM_DESC(en_multiple_tx_fifo, "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
++module_param_named(dev_tx_fifo_size_1, dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_2, dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_3, dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_4, dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_5, dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_6, dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_7, dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_8, dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_9, dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_10, dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_11, dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_12, dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_13, dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_14, dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_15, dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
++
++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
++MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
++
++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
++MODULE_PARM_DESC(pti_enable, "Per Transfer Interrupt mode 0=disabled 1=enabled");
++
++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
++MODULE_PARM_DESC(mpi_enable, "Multiprocessor Interrupt mode 0=disabled 1=enabled");
++
++/** @page "Module Parameters"
++ *
++ * The following parameters may be specified when starting the module.
++ * These parameters define how the DWC_otg controller should be
++ * configured. Parameter values are passed to the CIL initialization
++ * function dwc_otg_cil_init
++ *
++ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
++ *
++
++ <table>
++ <tr><td>Parameter Name</td><td>Meaning</td></tr>
++
++ <tr>
++ <td>otg_cap</td>
++ <td>Specifies the OTG capabilities. The driver will automatically detect the
++ value for this parameter if none is specified.
++ - 0: HNP and SRP capable (default, if available)
++ - 1: SRP Only capable
++ - 2: No HNP/SRP capable
++ </td></tr>
++
++ <tr>
++ <td>dma_enable</td>
++ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Slave
++ - 1: DMA (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dma_burst_size</td>
++ <td>The DMA Burst size (applicable only for External DMA Mode).
++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ </td></tr>
++
++ <tr>
++ <td>speed</td>
++ <td>Specifies the maximum speed of operation in host and device mode. The
++ actual speed depends on the speed of the attached device and the value of
++ phy_type.
++ - 0: High Speed (default)
++ - 1: Full Speed
++ </td></tr>
++
++ <tr>
++ <td>host_support_fs_ls_low_power</td>
++ <td>Specifies whether low power mode is supported when attached to a Full
++ Speed or Low Speed device in host mode.
++ - 0: Don't support low power mode (default)
++ - 1: Support low power mode
++ </td></tr>
++
++ <tr>
++ <td>host_ls_low_power_phy_clk</td>
++ <td>Specifies the PHY clock rate in low power mode when connected to a Low
++ Speed device in host mode. This parameter is applicable only if
++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
++ - 0: 48 MHz (default)
++ - 1: 6 MHz
++ </td></tr>
++
++ <tr>
++ <td>enable_dynamic_fifo</td>
++ <td> Specifies whether FIFOs may be resized by the driver software.
++ - 0: Use cC FIFO size parameters
++ - 1: Allow dynamic FIFO sizing (default)
++ </td></tr>
++
++ <tr>
++ <td>data_fifo_size</td>
++ <td>Total number of 4-byte words in the data FIFO memory. This memory
++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
++ - Values: 32 to 32768 (default 8192)
++
++ Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ </td></tr>
++
++ <tr>
++ <td>dev_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1064)
++ </td></tr>
++
++ <tr>
++ <td>dev_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
++ dynamic FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++ <tr>
++ <td>host_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
++ dynamic FIFO sizing is enabled in the core.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_perio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>max_transfer_size</td>
++ <td>The maximum transfer size supported in bytes.
++ - Values: 2047 to 65,535 (default 65,535)
++ </td></tr>
++
++ <tr>
++ <td>max_packet_count</td>
++ <td>The maximum number of packets in a transfer.
++ - Values: 15 to 511 (default 511)
++ </td></tr>
++
++ <tr>
++ <td>host_channels</td>
++ <td>The number of host channel registers to use.
++ - Values: 1 to 16 (default 12)
++
++ Note: The FPGA configuration supports a maximum of 12 host channels.
++ </td></tr>
++
++ <tr>
++ <td>dev_endpoints</td>
++ <td>The number of endpoints in addition to EP0 available for device mode
++ operations.
++ - Values: 1 to 15 (default 6 IN and OUT)
++
++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
++ addition to EP0.
++ </td></tr>
++
++ <tr>
++ <td>phy_type</td>
++ <td>Specifies the type of PHY interface to use. By default, the driver will
++ automatically detect the phy_type.
++ - 0: Full Speed
++ - 1: UTMI+ (default, if available)
++ - 2: ULPI
++ </td></tr>
++
++ <tr>
++ <td>phy_utmi_width</td>
++ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
++ phy_type of UTMI+. Also, this parameter is applicable only if the
++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
++ core has been configured to work at either data path width.
++ - Values: 8 or 16 bits (default 16)
++ </td></tr>
++
++ <tr>
++ <td>phy_ulpi_ddr</td>
++ <td>Specifies whether the ULPI operates at double or single data rate. This
++ parameter is only applicable if phy_type is ULPI.
++ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
++ - 1: double data rate ULPI interface with 4 bit wide data bus
++ </td></tr>
++
++ <tr>
++ <td>i2c_enable</td>
++ <td>Specifies whether to use the I2C interface for full speed PHY. This
++ parameter is only applicable if PHY_TYPE is FS.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>otg_en_multiple_tx_fifo</td>
++ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Disabled
++ - 1: Enabled (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++*/
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.h
+@@ -0,0 +1,83 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1064918 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_DRIVER_H__
++#define __DWC_OTG_DRIVER_H__
++
++/** @file
++ * This file contains the interface to the Linux driver.
++ */
++#include "dwc_otg_cil.h"
++
++/* Type declarations */
++struct dwc_otg_pcd;
++struct dwc_otg_hcd;
++
++/**
++ * This structure is a wrapper that encapsulates the driver components used to
++ * manage a single DWC_otg controller.
++ */
++typedef struct dwc_otg_device {
++	/** Base address returned from ioremap() */
++	void *base;
++
++	struct device *parent;
++
++	/** Pointer to the core interface structure. */
++	dwc_otg_core_if_t *core_if;
++
++	/** Register offset for Diagnostic API. */
++	uint32_t reg_offset;
++
++	/** Pointer to the PCD structure. */
++	struct dwc_otg_pcd *pcd;
++
++	/** Pointer to the HCD structure. */
++	struct dwc_otg_hcd *hcd;
++
++	/** Flag to indicate whether the common IRQ handler is installed. */
++	uint8_t common_irq_installed;
++
++	/* Interrupt request number. */
++	unsigned int irq;
++
++	/* Physical address of Control and Status registers, used by
++	 * release_mem_region().
++	 */
++	resource_size_t phys_addr;
++
++	/* Length of memory region, used by release_mem_region(). */
++	unsigned long base_len;
++} dwc_otg_device_t;
++
++#endif
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.c
+@@ -0,0 +1,2852 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
++ * $Revision: 1.4 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1064940 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the implementation of the HCD. In Linux, the HCD
++ * implements the hc_driver API.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++static const char dwc_otg_hcd_name[] = "dwc_otg";
++
++static const struct hc_driver dwc_otg_hc_driver = {
++
++	.description =		dwc_otg_hcd_name,
++	.product_desc = 	"DWC OTG Controller",
++	.hcd_priv_size = 	sizeof(dwc_otg_hcd_t),
++
++	.irq =			dwc_otg_hcd_irq,
++
++	.flags =		HCD_MEMORY | HCD_USB2,
++
++	//.reset =
++	.start =		dwc_otg_hcd_start,
++	//.suspend =
++	//.resume =
++	.stop =			dwc_otg_hcd_stop,
++
++	.urb_enqueue =		dwc_otg_hcd_urb_enqueue,
++	.urb_dequeue =		dwc_otg_hcd_urb_dequeue,
++	.endpoint_disable =	dwc_otg_hcd_endpoint_disable,
++
++	.get_frame_number =	dwc_otg_hcd_get_frame_number,
++
++	.hub_status_data =	dwc_otg_hcd_hub_status_data,
++	.hub_control =		dwc_otg_hcd_hub_control,
++	//.hub_suspend =
++	//.hub_resume =
++};
++
++/**
++ * Work queue function for starting the HCD when A-Cable is connected.
++ * The dwc_otg_hcd_start() must be called in a process context.
++ */
++static void hcd_start_func(
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++			   void *_vp
++#else
++			   struct work_struct *_work
++#endif
++			  )
++{
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++	struct usb_hcd *usb_hcd = (struct usb_hcd *)_vp;
++#else
++	struct delayed_work *dw = container_of(_work, struct delayed_work, work);
++	struct dwc_otg_hcd *otg_hcd = container_of(dw, struct dwc_otg_hcd, start_work);
++	struct usb_hcd *usb_hcd = container_of((void *)otg_hcd, struct usb_hcd, hcd_priv);
++#endif
++	DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
++	if (usb_hcd) {
++		dwc_otg_hcd_start(usb_hcd);
++	}
++}
++
++/**
++ * HCD Callback function for starting the HCD when A-Cable is
++ * connected.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_start_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++
++	if (core_if->op_state == B_HOST) {
++		/*
++		 * Reset the port.  During a HNP mode switch the reset
++		 * needs to occur within 1ms and have a duration of at
++		 * least 50ms.
++		 */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtrst = 1;
++		dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++		((struct usb_hcd *)p)->self.is_b_host = 1;
++	} else {
++		((struct usb_hcd *)p)->self.is_b_host = 0;
++	}
++
++	/* Need to start the HCD in a non-interrupt context. */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++	INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p);
++//	INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p);
++#else
++//	INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
++	INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
++#endif
++//	schedule_work(&dwc_otg_hcd->start_work);
++	queue_delayed_work(core_if->wq_otg, &dwc_otg_hcd->start_work, 50 * HZ / 1000);
++
++	return 1;
++}
++
++/**
++ * HCD Callback function for stopping the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_stop_cb(void *p)
++{
++	struct usb_hcd *usb_hcd = (struct usb_hcd *)p;
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++	dwc_otg_hcd_stop(usb_hcd);
++	return 1;
++}
++
++static void del_xfer_timers(dwc_otg_hcd_t *hcd)
++{
++#ifdef DEBUG
++	int i;
++	int num_channels = hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		del_timer(&hcd->core_if->hc_xfer_timer[i]);
++	}
++#endif
++}
++
++static void del_timers(dwc_otg_hcd_t *hcd)
++{
++	del_xfer_timers(hcd);
++	del_timer(&hcd->conn_timer);
++}
++
++/**
++ * Processes all the URBs in a single list of QHs. Completes them with
++ * -ETIMEDOUT and frees the QTD.
++ */
++static void kill_urbs_in_qh_list(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
++{
++	struct list_head	*qh_item;
++	dwc_otg_qh_t		*qh;
++	struct list_head	*qtd_item;
++	dwc_otg_qtd_t		*qtd;
++
++	list_for_each(qh_item, qh_list) {
++		qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
++		for (qtd_item = qh->qtd_list.next;
++		     qtd_item != &qh->qtd_list;
++		     qtd_item = qh->qtd_list.next) {
++			qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
++			if (qtd->urb != NULL) {
++				dwc_otg_hcd_complete_urb(hcd, qtd->urb,
++							 -ETIMEDOUT);
++			}
++			dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
++		}
++	}
++}
++
++/**
++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
++ * and periodic schedules. The QTD associated with each URB is removed from
++ * the schedule and freed. This function may be called when a disconnect is
++ * detected or when the HCD is being stopped.
++ */
++static void kill_all_urbs(dwc_otg_hcd_t *hcd)
++{
++	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
++	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_disconnect_cb(void *p)
++{
++	gintsts_data_t 	intr;
++	dwc_otg_hcd_t 	*dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
++
++	//DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++
++	/*
++	 * Set status flags for the hub driver.
++	 */
++	dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++	dwc_otg_hcd->flags.b.port_connect_status = 0;
++
++	/*
++	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
++	 * interrupt mask and status bits and disabling subsequent host
++	 * channel interrupts.
++	 */
++	intr.d32 = 0;
++	intr.b.nptxfempty = 1;
++	intr.b.ptxfempty = 1;
++	intr.b.hcintr = 1;
++	dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
++	dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
++
++	del_timers(dwc_otg_hcd);
++
++	/*
++	 * Turn off the vbus power only if the core has transitioned to device
++	 * mode. If still in host mode, need to keep power on to detect a
++	 * reconnection.
++	 */
++	if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
++		if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
++			hprt0_data_t hprt0 = { .d32=0 };
++			DWC_PRINT("Disconnect: PortPower off\n");
++			hprt0.b.prtpwr = 0;
++			dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++		}
++
++		dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
++	}
++
++	/* Respond with an error status to all URBs in the schedule. */
++	kill_all_urbs(dwc_otg_hcd);
++
++	if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
++		/* Clean up any host channels that were in use. */
++		int			num_channels;
++		int			i;
++		dwc_hc_t		*channel;
++		dwc_otg_hc_regs_t	*hc_regs;
++		hcchar_data_t		hcchar;
++
++		num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++
++		if (!dwc_otg_hcd->core_if->dma_enable) {
++			/* Flush out any channel requests in slave mode. */
++			for (i = 0; i < num_channels; i++) {
++				channel = dwc_otg_hcd->hc_ptr_array[i];
++				if (list_empty(&channel->hc_list_entry)) {
++					hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++					hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++					if (hcchar.b.chen) {
++						hcchar.b.chen = 0;
++						hcchar.b.chdis = 1;
++						hcchar.b.epdir = 0;
++						dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++					}
++				}
++			}
++		}
++
++		for (i = 0; i < num_channels; i++) {
++			channel = dwc_otg_hcd->hc_ptr_array[i];
++			if (list_empty(&channel->hc_list_entry)) {
++				hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++				hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++				if (hcchar.b.chen) {
++					/* Halt the channel. */
++					hcchar.b.chdis = 1;
++					dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++				}
++
++				dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
++				list_add_tail(&channel->hc_list_entry,
++					      &dwc_otg_hcd->free_hc_list);
++			}
++		}
++	}
++
++	/* A disconnect will end the session so the B-Device is no
++	 * longer a B-host. */
++	((struct usb_hcd *)p)->self.is_b_host = 0;
++	return 1;
++}
++
++/**
++ * Connection timeout function.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.
++ */
++void dwc_otg_hcd_connect_timeout(unsigned long ptr)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)ptr);
++	DWC_PRINT("Connect Timeout\n");
++	DWC_ERROR("Device Not Connected/Responding\n");
++}
++
++/**
++ * Start the connection timer.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.  The
++ * timer is deleted if a port connect interrupt occurs before the
++ * timer expires.
++ */
++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t *hcd)
++{
++	init_timer(&hcd->conn_timer);
++	hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
++	hcd->conn_timer.data = 0;
++	hcd->conn_timer.expires = jiffies + (HZ * 10);
++	add_timer(&hcd->conn_timer);
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_session_start_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++	dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
++	return 1;
++}
++
++/**
++ * HCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
++	.start = dwc_otg_hcd_start_cb,
++	.stop = dwc_otg_hcd_stop_cb,
++	.disconnect = dwc_otg_hcd_disconnect_cb,
++	.session_start = dwc_otg_hcd_session_start_cb,
++	.p = 0,
++};
++
++/**
++ * Reset tasklet function
++ */
++static void reset_tasklet_func(unsigned long data)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)data;
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++
++	DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
++
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtrst = 1;
++	dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++	mdelay(60);
++
++	hprt0.b.prtrst = 0;
++	dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++	dwc_otg_hcd->flags.b.port_reset_change = 1;
++}
++
++static struct tasklet_struct reset_tasklet = {
++	.next = NULL,
++	.state = 0,
++	.count = ATOMIC_INIT(0),
++	.func = reset_tasklet_func,
++	.data = 0,
++};
++
++/**
++ * Initializes the HCD. This function allocates memory for and initializes the
++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
++ * USB bus with the core and calls the hc_driver->start() function. It returns
++ * a negative error on failure.
++ */
++int dwc_otg_hcd_init(struct device *dev)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
++	struct usb_hcd *hcd = NULL;
++	dwc_otg_hcd_t *dwc_otg_hcd = NULL;
++
++	int 		num_channels;
++	int 		i;
++	dwc_hc_t	*channel;
++
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++	/* 2.6.20+ requires dev.dma_mask to be set prior to calling usb_create_hcd() */
++
++	/* Set device flags indicating whether the HCD supports DMA. */
++	if (otg_dev->core_if->dma_enable) {
++		DWC_PRINT("Using DMA mode\n");
++		dev->dma_mask = (void *)~0;
++		dev->coherent_dma_mask = ~0;
++
++		if (otg_dev->core_if->dma_desc_enable) {
++			DWC_PRINT("Device using Descriptor DMA mode\n");
++		} else {
++			DWC_PRINT("Device using Buffer DMA mode\n");
++		}
++	} else {
++		DWC_PRINT("Using Slave mode\n");
++		dev->dma_mask = (void *)0;
++		dev->coherent_dma_mask = 0;
++	}
++#endif
++	/*
++	 * Allocate memory for the base HCD plus the DWC OTG HCD.
++	 * Initialize the base HCD.
++	 */
++	hcd = usb_create_hcd(&dwc_otg_hc_driver, dev, dev_name(dev));
++	if (!hcd) {
++		retval = -ENOMEM;
++		goto error1;
++	}
++
++	dev_set_drvdata(dev, otg_dev);
++	hcd->regs = otg_dev->base;
++	hcd->rsrc_start = otg_dev->phys_addr;
++	hcd->rsrc_len = otg_dev->base_len;
++	hcd->self.otg_port = 1;
++	hcd->has_tt = 1;
++
++	/* Initialize the DWC OTG HCD. */
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_hcd->core_if = otg_dev->core_if;
++	otg_dev->hcd = dwc_otg_hcd;
++
++	/* */
++	spin_lock_init(&dwc_otg_hcd->lock);
++
++	/* Register the HCD CIL Callbacks */
++	dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if,
++					   &hcd_cil_callbacks, hcd);
++
++	/* Initialize the non-periodic schedule. */
++	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
++	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
++
++	/* Initialize the periodic schedule. */
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
++
++	/*
++	 * Create a host channel descriptor for each host channel implemented
++	 * in the controller. Initialize the channel descriptor array.
++	 */
++	INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
++	num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++	memset(dwc_otg_hcd->hc_ptr_array, 0, sizeof(dwc_otg_hcd->hc_ptr_array));
++	for (i = 0; i < num_channels; i++) {
++		channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
++		if (channel == NULL) {
++			retval = -ENOMEM;
++			DWC_ERROR("%s: host channel allocation failed\n", __func__);
++			goto error2;
++		}
++		memset(channel, 0, sizeof(dwc_hc_t));
++		channel->hc_num = i;
++		dwc_otg_hcd->hc_ptr_array[i] = channel;
++#ifdef DEBUG
++		init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
++#endif
++		DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
++	}
++
++	/* Initialize the Connection timeout timer. */
++	init_timer(&dwc_otg_hcd->conn_timer);
++
++	/* Initialize reset tasklet. */
++	reset_tasklet.data = (unsigned long) dwc_otg_hcd;
++	dwc_otg_hcd->reset_tasklet = &reset_tasklet;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++	/* Set device flags indicating whether the HCD supports DMA. */
++	if (otg_dev->core_if->dma_enable) {
++		DWC_PRINT("Using DMA mode\n");
++		dev->dma_mask = (void *)~0;
++		dev->coherent_dma_mask = ~0;
++
++		if (otg_dev->core_if->dma_desc_enable){
++			DWC_PRINT("Device using Descriptor DMA mode\n");
++		} else {
++			DWC_PRINT("Device using Buffer DMA mode\n");
++		}
++	} else {
++		DWC_PRINT("Using Slave mode\n");
++		dev->dma_mask = (void *)0;
++		dev->dev.coherent_dma_mask = 0;
++	}
++#endif
++	/*
++	 * Finish generic HCD initialization and start the HCD. This function
++	 * allocates the DMA buffer pool, registers the USB bus, requests the
++	 * IRQ line, and calls dwc_otg_hcd_start method.
++	 */
++	retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
++	if (retval < 0) {
++		goto error2;
++	}
++
++	/*
++	 * Allocate space for storing data on status transactions. Normally no
++	 * data is sent, but this space acts as a bit bucket. This must be
++	 * done after usb_add_hcd since that function allocates the DMA buffer
++	 * pool.
++	 */
++	if (otg_dev->core_if->dma_enable) {
++		dwc_otg_hcd->status_buf =
++			dma_alloc_coherent(dev,
++					   DWC_OTG_HCD_STATUS_BUF_SIZE,
++					   &dwc_otg_hcd->status_buf_dma,
++					   GFP_KERNEL | GFP_DMA);
++	} else {
++		dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
++						  GFP_KERNEL);
++	}
++	if (!dwc_otg_hcd->status_buf) {
++		retval = -ENOMEM;
++		DWC_ERROR("%s: status_buf allocation failed\n", __func__);
++		goto error3;
++	}
++
++	dwc_otg_hcd->otg_dev = otg_dev;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n",
++		    dev_name(dev), hcd->self.busnum);
++
++	return 0;
++
++	/* Error conditions */
++ error3:
++	usb_remove_hcd(hcd);
++ error2:
++	dwc_otg_hcd_free(hcd);
++	usb_put_hcd(hcd);
++
++	/* FIXME: 2008/05/03 by Steven
++	 * write back to device:
++	 * dwc_otg_hcd has already been released by dwc_otg_hcd_free()
++	 */
++	dev_set_drvdata(dev, otg_dev);
++
++ error1:
++	return retval;
++}
++
++/**
++ * Removes the HCD.
++ * Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void dwc_otg_hcd_remove(struct device *dev)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	struct usb_hcd *hcd;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
++
++	if (!otg_dev) {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++		return;
++	}
++
++	dwc_otg_hcd = otg_dev->hcd;
++
++	if (!dwc_otg_hcd) {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++		return;
++	}
++
++	hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
++
++	if (!hcd) {
++		DWC_DEBUGPL(DBG_ANY, "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", __func__);
++		return;
++	}
++
++	/* Turn off all interrupts */
++	dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
++	dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
++
++	usb_remove_hcd(hcd);
++	dwc_otg_hcd_free(hcd);
++	usb_put_hcd(hcd);
++}
++
++/* =========================================================================
++ *  Linux HC Driver Functions
++ * ========================================================================= */
++
++/**
++ * Initializes dynamic portions of the DWC_otg HCD state.
++ */
++static void hcd_reinit(dwc_otg_hcd_t *hcd)
++{
++	struct list_head 	*item;
++	int			num_channels;
++	int			i;
++	dwc_hc_t		*channel;
++
++	hcd->flags.d32 = 0;
++
++	hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
++	hcd->non_periodic_channels = 0;
++	hcd->periodic_channels = 0;
++
++	/*
++	 * Put all channels in the free channel list and clean up channel
++	 * states.
++	 */
++	item = hcd->free_hc_list.next;
++	while (item != &hcd->free_hc_list) {
++		list_del(item);
++		item = hcd->free_hc_list.next;
++	}
++	num_channels = hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		channel = hcd->hc_ptr_array[i];
++		list_add_tail(&channel->hc_list_entry, &hcd->free_hc_list);
++		dwc_otg_hc_cleanup(hcd->core_if, channel);
++	}
++
++	/* Initialize the DWC core for host mode operation. */
++	dwc_otg_core_host_init(hcd->core_if);
++}
++
++/** Initializes the DWC_otg controller and its root hub and prepares it for host
++ * mode operation. Activates the root port. Returns 0 on success and a negative
++ * error code on failure. */
++int dwc_otg_hcd_start(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++  	struct usb_bus *bus;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++  	struct usb_device *udev;
++	int retval;
++#endif
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
++
++	bus = hcd_to_bus(hcd);
++
++	/* Initialize the bus state.  If the core is in Device Mode
++	 * HALT the USB bus and return. */
++	if (dwc_otg_is_device_mode(core_if)) {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++		hcd->state = HC_STATE_HALT;
++#else
++		hcd->state = HC_STATE_RUNNING;
++#endif
++		return 0;
++	}
++	hcd->state = HC_STATE_RUNNING;
++
++	/* Initialize and connect root hub if one is not already attached */
++	if (bus->root_hub) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
++		/* Inform the HUB driver to resume. */
++		usb_hcd_resume_root_hub(hcd);
++	}
++	else {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Does Not Have Root Hub\n");
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++		udev = usb_alloc_dev(NULL, bus, 0);
++		udev->speed = USB_SPEED_HIGH;
++		if (!udev) {
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
++			return -ENODEV;
++		}
++		if ((retval = usb_hcd_register_root_hub(udev, hcd)) != 0) {
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval);
++			return -ENODEV;
++		}
++#endif
++	}
++
++	hcd_reinit(dwc_otg_hcd);
++
++	return 0;
++}
++
++static void qh_list_free(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
++{
++	struct list_head 	*item;
++	dwc_otg_qh_t		*qh;
++
++	if (!qh_list->next) {
++		/* The list hasn't been initialized yet. */
++		return;
++	}
++
++	/* Ensure there are no QTDs or URBs left. */
++	kill_urbs_in_qh_list(hcd, qh_list);
++
++	for (item = qh_list->next; item != qh_list; item = qh_list->next) {
++		qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++		dwc_otg_hcd_qh_remove_and_free(hcd, qh);
++	}
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void dwc_otg_hcd_stop(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	hprt0_data_t hprt0 = { .d32=0 };
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
++
++	/* Turn off all host-specific interrupts. */
++	dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
++
++	/*
++	 * The root hub should be disconnected before this function is called.
++	 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
++	 * and the QH lists (via ..._hcd_endpoint_disable).
++	 */
++
++	/* Turn off the vbus power */
++	DWC_PRINT("PortPower off\n");
++	hprt0.b.prtpwr = 0;
++	dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++}
++
++/** Returns the current frame number. */
++int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	hfnum_data_t hfnum;
++
++	hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
++				   host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
++#endif
++	return hfnum.b.frnum;
++}
++
++/**
++ * Frees secondary storage associated with the dwc_otg_hcd structure contained
++ * in the struct usb_hcd field.
++ */
++void dwc_otg_hcd_free(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t 	*dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	int		i;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
++
++	del_timers(dwc_otg_hcd);
++
++	/* Free memory for QH/QTD lists */
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
++
++	/* Free memory for the host channels. */
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
++		if (hc != NULL) {
++			DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
++			kfree(hc);
++		}
++	}
++
++	if (dwc_otg_hcd->core_if->dma_enable) {
++		if (dwc_otg_hcd->status_buf_dma) {
++			dma_free_coherent(hcd->self.controller,
++					  DWC_OTG_HCD_STATUS_BUF_SIZE,
++					  dwc_otg_hcd->status_buf,
++					  dwc_otg_hcd->status_buf_dma);
++		}
++	} else if (dwc_otg_hcd->status_buf != NULL) {
++		kfree(dwc_otg_hcd->status_buf);
++	}
++}
++
++#ifdef DEBUG
++static void dump_urb_info(struct urb *urb, char* fn_name)
++{
++	DWC_PRINT("%s, urb %p\n", fn_name, urb);
++	DWC_PRINT("  Device address: %d\n", usb_pipedevice(urb->pipe));
++	DWC_PRINT("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++		  (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++	DWC_PRINT("  Endpoint type: %s\n",
++		  ({char *pipetype;
++		    switch (usb_pipetype(urb->pipe)) {
++		    case PIPE_CONTROL: pipetype = "CONTROL"; break;
++		    case PIPE_BULK: pipetype = "BULK"; break;
++		    case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++		    case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++		    default: pipetype = "UNKNOWN"; break;
++		   }; pipetype;}));
++	DWC_PRINT("  Speed: %s\n",
++		  ({char *speed;
++		    switch (urb->dev->speed) {
++		    case USB_SPEED_HIGH: speed = "HIGH"; break;
++		    case USB_SPEED_FULL: speed = "FULL"; break;
++		    case USB_SPEED_LOW: speed = "LOW"; break;
++		    default: speed = "UNKNOWN"; break;
++		   }; speed;}));
++	DWC_PRINT("  Max packet size: %d\n",
++		  usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++	DWC_PRINT("  Data buffer length: %d\n", urb->transfer_buffer_length);
++	DWC_PRINT("  Transfer buffer: %p, Transfer DMA: %p\n",
++		  urb->transfer_buffer, (void *)urb->transfer_dma);
++	DWC_PRINT("  Setup buffer: %p, Setup DMA: %p\n",
++		  urb->setup_packet, (void *)urb->setup_dma);
++	DWC_PRINT("  Interval: %d\n", urb->interval);
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		int i;
++		for (i = 0; i < urb->number_of_packets;  i++) {
++			DWC_PRINT("  ISO Desc %d:\n", i);
++			DWC_PRINT("    offset: %d, length %d\n",
++				  urb->iso_frame_desc[i].offset,
++				  urb->iso_frame_desc[i].length);
++		}
++	}
++}
++
++static void dump_channel_info(dwc_otg_hcd_t *hcd,
++			      dwc_otg_qh_t *qh)
++{
++	if (qh->channel != NULL) {
++		dwc_hc_t *hc = qh->channel;
++		struct list_head *item;
++		dwc_otg_qh_t *qh_item;
++		int num_channels = hcd->core_if->core_params->host_channels;
++		int i;
++
++		dwc_otg_hc_regs_t *hc_regs;
++		hcchar_data_t 	hcchar;
++		hcsplt_data_t	hcsplt;
++		hctsiz_data_t 	hctsiz;
++		uint32_t	hcdma;
++
++		hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++		hcdma = dwc_read_reg32(&hc_regs->hcdma);
++
++		DWC_PRINT("  Assigned to channel %p:\n", hc);
++		DWC_PRINT("    hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++		DWC_PRINT("    hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++		DWC_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++			  hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINT("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINT("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINT("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINT("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINT("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINT("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINT("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINT("    qh: %p\n", hc->qh);
++		DWC_PRINT("  NP inactive sched:\n");
++		list_for_each(item, &hcd->non_periodic_sched_inactive) {
++			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINT("    %p\n", qh_item);
++		}
++		DWC_PRINT("  NP active sched:\n");
++		list_for_each(item, &hcd->non_periodic_sched_active) {
++			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINT("    %p\n", qh_item);
++		}
++		DWC_PRINT("  Channels: \n");
++		for (i = 0; i < num_channels; i++) {
++			dwc_hc_t *hc = hcd->hc_ptr_array[i];
++			DWC_PRINT("    %2d: %p\n", i, hc);
++		}
++	}
++}
++#endif
++
++/** Starts processing a USB transfer request specified by a USB Request Block
++ * (URB). mem_flags indicates the type of memory allocation to use while
++ * processing this URB. */
++int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
++			    struct urb *urb,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++			    int mem_flags
++#else
++			    gfp_t mem_flags
++#endif
++			  )
++{
++	int retval = 0;
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_qtd_t *qtd;
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(urb, "dwc_otg_hcd_urb_enqueue");
++	}
++#endif
++	if (!dwc_otg_hcd->flags.b.port_connect_status) {
++		/* No longer connected. */
++		return -ENODEV;
++	}
++
++	qtd = dwc_otg_hcd_qtd_create(urb);
++	if (qtd == NULL) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
++		return -ENOMEM;
++	}
++
++	retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd);
++	if (retval < 0) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
++			  "Error status %d\n", retval);
++		dwc_otg_hcd_qtd_free(qtd);
++	}
++
++	return retval;
++}
++
++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
++ * success.  */
++int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
++			    struct urb *urb,
++			    int status)
++{
++	unsigned long flags;
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	dwc_otg_qtd_t *urb_qtd;
++	dwc_otg_qh_t *qh;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++	struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
++#endif
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
++
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
++
++	urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv;
++	qh = (dwc_otg_qh_t *)ep->hcpriv;
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue");
++		if (urb_qtd == qh->qtd_in_process) {
++			dump_channel_info(dwc_otg_hcd, qh);
++		}
++	}
++#endif
++
++	if (urb_qtd == qh->qtd_in_process) {
++		/* The QTD is in process (it has been assigned to a channel). */
++
++		if (dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * If still connected (i.e. in host mode), halt the
++			 * channel so it can be used for other transfers. If
++			 * no longer connected, the host registers can't be
++			 * written to halt the channel since the core is in
++			 * device mode.
++			 */
++			dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
++					DWC_OTG_HC_XFER_URB_DEQUEUE);
++		}
++	}
++
++	/*
++	 * Free the QTD and clean up the associated QH. Leave the QH in the
++	 * schedule if it has any remaining QTDs.
++	 */
++	dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd);
++	if (urb_qtd == qh->qtd_in_process) {
++		dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
++		qh->channel = NULL;
++		qh->qtd_in_process = NULL;
++	} else if (list_empty(&qh->qtd_list)) {
++		dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++
++	urb->hcpriv = NULL;
++
++	/* Higher layer software sets URB status. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++	usb_hcd_giveback_urb(hcd, urb, status);
++#else
++	usb_hcd_giveback_urb(hcd, urb, NULL);
++#endif
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINT("Called usb_hcd_giveback_urb()\n");
++		DWC_PRINT("  urb->status = %d\n", urb->status);
++	}
++
++	return 0;
++}
++
++/** Frees resources in the DWC_otg controller related to a given endpoint. Also
++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
++ * must already be dequeued. */
++void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
++				  struct usb_host_endpoint *ep)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_qh_t *qh;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++	unsigned long flags;
++	int retry = 0;
++#endif
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++		    "endpoint=%d\n", ep->desc.bEndpointAddress,
++		    dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++rescan:
++	SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
++	qh = (dwc_otg_qh_t *)(ep->hcpriv);
++	if (!qh)
++		goto done;
++
++	/** Check that the QTD list is really empty */
++	if (!list_empty(&qh->qtd_list)) {
++		if (retry++ < 250) {
++			SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++			schedule_timeout_uninterruptible(1);
++			goto rescan;
++		}
++
++		DWC_WARN("DWC OTG HCD EP DISABLE:"
++			 " QTD List for this endpoint is not empty\n");
++	}
++
++	dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
++	ep->hcpriv = NULL;
++done:
++	SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++
++#else // LINUX_VERSION_CODE
++
++	qh = (dwc_otg_qh_t *)(ep->hcpriv);
++	if (qh != NULL) {
++#ifdef DEBUG
++		/** Check that the QTD list is really empty */
++		if (!list_empty(&qh->qtd_list)) {
++			DWC_WARN("DWC OTG HCD EP DISABLE:"
++				 " QTD List for this endpoint is not empty\n");
++		}
++#endif
++		dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
++		ep->hcpriv = NULL;
++	}
++#endif // LINUX_VERSION_CODE
++}
++
++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs */
++irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++			    , struct pt_regs *regs
++#endif
++			  )
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd));
++}
++
++/** Creates Status Change bitmap for the root hub and root port. The bitmap is
++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++ * is the status change indicator for the single root port. Returns 1 if either
++ * change indicator is 1, otherwise returns 0. */
++int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	buf[0] = 0;
++	buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
++		    dwc_otg_hcd->flags.b.port_reset_change ||
++		    dwc_otg_hcd->flags.b.port_enable_change ||
++		    dwc_otg_hcd->flags.b.port_suspend_change ||
++		    dwc_otg_hcd->flags.b.port_over_current_change) << 1;
++
++#ifdef DEBUG
++	if (buf[0]) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
++			    " Root port status changed\n");
++		DWC_DEBUGPL(DBG_HCDV, "  port_connect_status_change: %d\n",
++			    dwc_otg_hcd->flags.b.port_connect_status_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_reset_change: %d\n",
++			    dwc_otg_hcd->flags.b.port_reset_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_enable_change: %d\n",
++			    dwc_otg_hcd->flags.b.port_enable_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_suspend_change: %d\n",
++			    dwc_otg_hcd->flags.b.port_suspend_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_over_current_change: %d\n",
++			    dwc_otg_hcd->flags.b.port_over_current_change);
++	}
++#endif
++	return (buf[0] != 0);
++}
++
++#ifdef DWC_HS_ELECT_TST
++/*
++ * Quick and dirty hack to implement the HS Electrical Test
++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++ *
++ * This code was copied from our userspace app "hset". It sends a
++ * Get Device Descriptor control sequence in two parts, first the
++ * Setup packet by itself, followed some time later by the In and
++ * Ack packets. Rather than trying to figure out how to add this
++ * functionality to the normal driver code, we just hijack the
++ * hardware, using these two function to drive the hardware
++ * directly.
++ */
++
++dwc_otg_core_global_regs_t *global_regs;
++dwc_otg_host_global_regs_t *hc_global_regs;
++dwc_otg_hc_regs_t *hc_regs;
++uint32_t *data_fifo;
++
++static void do_setup(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++
++	/* Enable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/*
++	 * Send Setup packet (Get Device Descriptor)
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++//		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	/* Fill FIFO with Setup data for Get Device Descriptor */
++	data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++	dwc_write_reg32(data_fifo++, 0x01000680);
++	dwc_write_reg32(data_fifo++, 0x00080000);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Disable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++
++static void do_in_ack(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++	host_grxsts_data_t grxsts;
++
++	/* Enable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/*
++	 * Receive Control In packet
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 1;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	//fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read RXSTS */
++	grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++	//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer */
++		if (grxsts.b.bcnt > 0) {
++			int i;
++			int word_count = (grxsts.b.bcnt + 3) / 4;
++
++			data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++			for (i = 0; i < word_count; i++) {
++				(void)dwc_read_reg32(data_fifo++);
++			}
++		}
++
++		//fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
++	break;
++
++	default:
++		//fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
++	break;
++	}
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	//fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read RXSTS */
++	grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++	//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++	break;
++
++	default:
++		//fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
++	break;
++	}
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++//	usleep(100000);
++//	mdelay(100);
++	mdelay(1);
++
++	/*
++	 * Send handshake packet
++	 */
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 0;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Disable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++#endif /* DWC_HS_ELECT_TST */
++
++/** Handles hub class-specific requests. */
++int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
++			    u16 typeReq,
++			    u16 wValue,
++			    u16 wIndex,
++			    char *buf,
++			    u16 wLength)
++{
++	int retval = 0;
++
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd(hcd)->core_if;
++	struct usb_hub_descriptor *desc;
++	hprt0_data_t hprt0 = {.d32 = 0};
++
++	uint32_t port_status;
++
++	switch (typeReq) {
++	case ClearHubFeature:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "ClearHubFeature 0x%x\n", wValue);
++		switch (wValue) {
++		case C_HUB_LOCAL_POWER:
++		case C_HUB_OVER_CURRENT:
++			/* Nothing required here */
++			break;
++		default:
++			retval = -EINVAL;
++			DWC_ERROR("DWC OTG HCD - "
++				  "ClearHubFeature request %xh unknown\n", wValue);
++		}
++		break;
++	case ClearPortFeature:
++		if (!wIndex || wIndex > 1)
++			goto error;
++
++		switch (wValue) {
++		case USB_PORT_FEAT_ENABLE:
++			DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtena = 1;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case USB_PORT_FEAT_SUSPEND:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtres = 1;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			/* Clear Resume bit */
++			mdelay(100);
++			hprt0.b.prtres = 0;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case USB_PORT_FEAT_POWER:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_POWER\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtpwr = 0;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case USB_PORT_FEAT_INDICATOR:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++			/* Port inidicator not supported */
++			break;
++		case USB_PORT_FEAT_C_CONNECTION:
++			/* Clears drivers internal connect status change
++			 * flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++			dwc_otg_hcd->flags.b.port_connect_status_change = 0;
++			break;
++		case USB_PORT_FEAT_C_RESET:
++			/* Clears the driver's internal Port Reset Change
++			 * flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++			dwc_otg_hcd->flags.b.port_reset_change = 0;
++			break;
++		case USB_PORT_FEAT_C_ENABLE:
++			/* Clears the driver's internal Port
++			 * Enable/Disable Change flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++			dwc_otg_hcd->flags.b.port_enable_change = 0;
++			break;
++		case USB_PORT_FEAT_C_SUSPEND:
++			/* Clears the driver's internal Port Suspend
++			 * Change flag, which is set when resume signaling on
++			 * the host port is complete */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++			dwc_otg_hcd->flags.b.port_suspend_change = 0;
++			break;
++		case USB_PORT_FEAT_C_OVER_CURRENT:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++			dwc_otg_hcd->flags.b.port_over_current_change = 0;
++			break;
++		default:
++			retval = -EINVAL;
++			DWC_ERROR("DWC OTG HCD - "
++				  "ClearPortFeature request %xh "
++				  "unknown or unsupported\n", wValue);
++		}
++		break;
++	case GetHubDescriptor:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetHubDescriptor\n");
++		desc = (struct usb_hub_descriptor *)buf;
++		desc->bDescLength = 9;
++		desc->bDescriptorType = 0x29;
++		desc->bNbrPorts = 1;
++		desc->wHubCharacteristics = 0x08;
++		desc->bPwrOn2PwrGood = 1;
++		desc->bHubContrCurrent = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
++		desc->u.hs.DeviceRemovable[0] = 0;
++		desc->u.hs.DeviceRemovable[1] = 0xff;
++#endif
++		break;
++	case GetHubStatus:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetHubStatus\n");
++		memset(buf, 0, 4);
++		break;
++	case GetPortStatus:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetPortStatus\n");
++
++		if (!wIndex || wIndex > 1)
++			goto error;
++
++		port_status = 0;
++
++		if (dwc_otg_hcd->flags.b.port_connect_status_change)
++			port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
++
++		if (dwc_otg_hcd->flags.b.port_enable_change)
++			port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
++
++		if (dwc_otg_hcd->flags.b.port_suspend_change)
++			port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
++
++		if (dwc_otg_hcd->flags.b.port_reset_change)
++			port_status |= (1 << USB_PORT_FEAT_C_RESET);
++
++		if (dwc_otg_hcd->flags.b.port_over_current_change) {
++			DWC_ERROR("Device Not Supported\n");
++			port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
++		}
++
++		if (!dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return 0's for the remainder of the port status
++			 * since the port register can't be read if the core
++			 * is in device mode.
++			 */
++			*((__le32 *) buf) = cpu_to_le32(port_status);
++			break;
++		}
++
++		hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
++		DWC_DEBUGPL(DBG_HCDV, "  HPRT0: 0x%08x\n", hprt0.d32);
++
++		if (hprt0.b.prtconnsts)
++			port_status |= (1 << USB_PORT_FEAT_CONNECTION);
++
++		if (hprt0.b.prtena)
++			port_status |= (1 << USB_PORT_FEAT_ENABLE);
++
++		if (hprt0.b.prtsusp)
++			port_status |= (1 << USB_PORT_FEAT_SUSPEND);
++
++		if (hprt0.b.prtovrcurract)
++			port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
++
++		if (hprt0.b.prtrst)
++			port_status |= (1 << USB_PORT_FEAT_RESET);
++
++		if (hprt0.b.prtpwr)
++			port_status |= (1 << USB_PORT_FEAT_POWER);
++
++		if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
++			port_status |= USB_PORT_STAT_HIGH_SPEED;
++		else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
++			port_status |= USB_PORT_STAT_LOW_SPEED;
++
++		if (hprt0.b.prttstctl)
++			port_status |= (1 << USB_PORT_FEAT_TEST);
++
++		/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++
++		*((__le32 *) buf) = cpu_to_le32(port_status);
++
++		break;
++	case SetHubFeature:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "SetHubFeature\n");
++		/* No HUB features supported */
++		break;
++	case SetPortFeature:
++		if (wValue != USB_PORT_FEAT_TEST && (!wIndex || wIndex > 1))
++			goto error;
++
++		if (!dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return without doing anything since the port
++			 * register can't be written if the core is in device
++			 * mode.
++			 */
++			break;
++		}
++
++		switch (wValue) {
++		case USB_PORT_FEAT_SUSPEND:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++			if (hcd->self.otg_port == wIndex &&
++			    hcd->self.b_hnp_enable) {
++				gotgctl_data_t  gotgctl = {.d32=0};
++				gotgctl.b.hstsethnpen = 1;
++				dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
++						  0, gotgctl.d32);
++				core_if->op_state = A_SUSPEND;
++			}
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtsusp = 1;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			//DWC_PRINT("SUSPEND: HPRT0=%0x\n", hprt0.d32);
++			/* Suspend the Phy Clock */
++			{
++				pcgcctl_data_t pcgcctl = {.d32=0};
++				pcgcctl.b.stoppclk = 1;
++				dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
++			}
++
++			/* For HNP the bus must be suspended for at least 200ms. */
++			if (hcd->self.b_hnp_enable) {
++				mdelay(200);
++				//DWC_PRINT("SUSPEND: wait complete! (%d)\n", _hcd->state);
++			}
++			break;
++		case USB_PORT_FEAT_POWER:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_POWER\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtpwr = 1;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case USB_PORT_FEAT_RESET:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_RESET\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			/* When B-Host the Port reset bit is set in
++			 * the Start HCD Callback function, so that
++			 * the reset is started within 1ms of the HNP
++			 * success interrupt. */
++			if (!hcd->self.is_b_host) {
++				hprt0.b.prtrst = 1;
++				dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			}
++			/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++			MDELAY(60);
++			hprt0.b.prtrst = 0;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++
++#ifdef DWC_HS_ELECT_TST
++		case USB_PORT_FEAT_TEST:
++		{
++			uint32_t t;
++			gintmsk_data_t gintmsk;
++
++			t = (wIndex >> 8); /* MSB wIndex USB */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
++			warn("USB_PORT_FEAT_TEST %d\n", t);
++			if (t < 6) {
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prttstctl = t;
++				dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			} else {
++				/* Setup global vars with reg addresses (quick and
++				 * dirty hack, should be cleaned up)
++				 */
++				global_regs = core_if->core_global_regs;
++				hc_global_regs = core_if->host_if->host_global_regs;
++				hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
++				data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++				if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
++					/* Save current interrupt mask */
++					gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++					/* Disable all interrupts while we muck with
++					 * the hardware directly
++					 */
++					dwc_write_reg32(&global_regs->gintmsk, 0);
++
++					/* 15 second delay per the test spec */
++					mdelay(15000);
++
++					/* Drive suspend on the root port */
++					hprt0.d32 = dwc_otg_read_hprt0(core_if);
++					hprt0.b.prtsusp = 1;
++					hprt0.b.prtres = 0;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++					/* 15 second delay per the test spec */
++					mdelay(15000);
++
++					/* Drive resume on the root port */
++					hprt0.d32 = dwc_otg_read_hprt0(core_if);
++					hprt0.b.prtsusp = 0;
++					hprt0.b.prtres = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					mdelay(100);
++
++					/* Clear the resume bit */
++					hprt0.b.prtres = 0;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++					/* Restore interrupts */
++					dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++				} else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++					/* Save current interrupt mask */
++					gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++					/* Disable all interrupts while we muck with
++					 * the hardware directly
++					 */
++					dwc_write_reg32(&global_regs->gintmsk, 0);
++
++					/* 15 second delay per the test spec */
++					mdelay(15000);
++
++					/* Send the Setup packet */
++					do_setup();
++
++					/* 15 second delay so nothing else happens for awhile */
++					mdelay(15000);
++
++					/* Restore interrupts */
++					dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++				} else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++					/* Save current interrupt mask */
++					gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++					/* Disable all interrupts while we muck with
++					 * the hardware directly
++					 */
++					dwc_write_reg32(&global_regs->gintmsk, 0);
++
++					/* Send the Setup packet */
++					do_setup();
++
++					/* 15 second delay so nothing else happens for awhile */
++					mdelay(15000);
++
++					/* Send the In and Ack packets */
++					do_in_ack();
++
++					/* 15 second delay so nothing else happens for awhile */
++					mdelay(15000);
++
++					/* Restore interrupts */
++					dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++				}
++			}
++			break;
++		}
++#endif /* DWC_HS_ELECT_TST */
++
++		case USB_PORT_FEAT_INDICATOR:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++			/* Not supported */
++			break;
++		default:
++			retval = -EINVAL;
++			DWC_ERROR("DWC OTG HCD - "
++				  "SetPortFeature request %xh "
++				  "unknown or unsupported\n", wValue);
++			break;
++		}
++		break;
++	default:
++	error:
++		retval = -EINVAL;
++		DWC_WARN("DWC OTG HCD - "
++			 "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
++			 typeReq, wIndex, wValue);
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * Assigns transactions from a QTD to a free host channel and initializes the
++ * host channel to perform the transactions. The host channel is removed from
++ * the free list.
++ *
++ * @param hcd The HCD state structure.
++ * @param qh Transactions from the first QTD for this QH are selected and
++ * assigned to a free host channel.
++ */
++static void assign_and_init_hc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	dwc_hc_t	*hc;
++	dwc_otg_qtd_t	*qtd;
++	struct urb	*urb;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, hcd, qh);
++
++	hc = list_entry(hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
++
++	/* Remove the host channel from the free list. */
++	list_del_init(&hc->hc_list_entry);
++
++	qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++	urb = qtd->urb;
++	qh->channel = hc;
++	qh->qtd_in_process = qtd;
++
++	/*
++	 * Use usb_pipedevice to determine device address. This address is
++	 * 0 before the SET_ADDRESS command and the correct address afterward.
++	 */
++	hc->dev_addr = usb_pipedevice(urb->pipe);
++	hc->ep_num = usb_pipeendpoint(urb->pipe);
++
++	if (urb->dev->speed == USB_SPEED_LOW) {
++		hc->speed = DWC_OTG_EP_SPEED_LOW;
++	} else if (urb->dev->speed == USB_SPEED_FULL) {
++		hc->speed = DWC_OTG_EP_SPEED_FULL;
++	} else {
++		hc->speed = DWC_OTG_EP_SPEED_HIGH;
++	}
++
++	hc->max_packet = dwc_max_packet(qh->maxp);
++
++	hc->xfer_started = 0;
++	hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
++	hc->error_state = (qtd->error_count > 0);
++	hc->halt_on_queue = 0;
++	hc->halt_pending = 0;
++	hc->requests = 0;
++
++	/*
++	 * The following values may be modified in the transfer type section
++	 * below. The xfer_len value may be reduced when the transfer is
++	 * started to accommodate the max widths of the XferSize and PktCnt
++	 * fields in the HCTSIZn register.
++	 */
++	hc->do_ping = qh->ping_state;
++	hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
++	hc->data_pid_start = qh->data_toggle;
++	hc->multi_count = 1;
++
++	if (hcd->core_if->dma_enable) {
++		hc->xfer_buff = (uint8_t *)urb->transfer_dma + urb->actual_length;
++	} else {
++		hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
++	}
++	hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
++	hc->xfer_count = 0;
++
++	/*
++	 * Set the split attributes
++	 */
++	hc->do_split = 0;
++	if (qh->do_split) {
++		hc->do_split = 1;
++		hc->xact_pos = qtd->isoc_split_pos;
++		hc->complete_split = qtd->complete_split;
++		hc->hub_addr = urb->dev->tt->hub->devnum;
++		hc->port_addr = urb->dev->ttport;
++	}
++
++	switch (usb_pipetype(urb->pipe)) {
++	case PIPE_CONTROL:
++		hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
++		switch (qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction\n");
++			hc->do_ping = 0;
++			hc->ep_is_in = 0;
++			hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *)urb->setup_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *)urb->setup_packet;
++			}
++			hc->xfer_len = 8;
++			break;
++		case DWC_OTG_CONTROL_DATA:
++			DWC_DEBUGPL(DBG_HCDV, "  Control data transaction\n");
++			hc->data_pid_start = qtd->data_toggle;
++			break;
++		case DWC_OTG_CONTROL_STATUS:
++			/*
++			 * Direction is opposite of data direction or IN if no
++			 * data.
++			 */
++			DWC_DEBUGPL(DBG_HCDV, "  Control status transaction\n");
++			if (urb->transfer_buffer_length == 0) {
++				hc->ep_is_in = 1;
++			} else {
++				hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
++			}
++			if (hc->ep_is_in) {
++				hc->do_ping = 0;
++			}
++			hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++			hc->xfer_len = 0;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *)hcd->status_buf_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *)hcd->status_buf;
++			}
++			break;
++		}
++		break;
++	case PIPE_BULK:
++		hc->ep_type = DWC_OTG_EP_TYPE_BULK;
++		break;
++	case PIPE_INTERRUPT:
++		hc->ep_type = DWC_OTG_EP_TYPE_INTR;
++		break;
++	case PIPE_ISOCHRONOUS:
++		{
++			struct usb_iso_packet_descriptor *frame_desc;
++			frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
++			hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *)urb->transfer_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
++			}
++			hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
++			hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
++
++			if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++				if (hc->xfer_len <= 188) {
++					hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				}
++				else {
++					hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
++				}
++			}
++		}
++		break;
++	}
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++	    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		/*
++		 * This value may be modified when the transfer is started to
++		 * reflect the actual transfer length.
++		 */
++		hc->multi_count = dwc_hb_mult(qh->maxp);
++	}
++
++	dwc_otg_hc_init(hcd->core_if, hc);
++	hc->qh = qh;
++}
++
++/**
++ * This function selects transactions from the HCD transfer schedule and
++ * assigns them to available host channels. It is called from HCD interrupt
++ * handler functions.
++ *
++ * @param hcd The HCD state structure.
++ *
++ * @return The types of new transactions that were assigned to host channels.
++ */
++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd)
++{
++	struct list_head 		*qh_ptr;
++	dwc_otg_qh_t 			*qh;
++	int				num_channels;
++	dwc_otg_transaction_type_e	ret_val = DWC_OTG_TRANSACTION_NONE;
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "  Select Transactions\n");
++#endif
++
++	/* Process entries in the periodic ready list. */
++	qh_ptr = hcd->periodic_sched_ready.next;
++	while (qh_ptr != &hcd->periodic_sched_ready &&
++	       !list_empty(&hcd->free_hc_list)) {
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(hcd, qh);
++
++		/*
++		 * Move the QH from the periodic ready schedule to the
++		 * periodic assigned schedule.
++		 */
++		qh_ptr = qh_ptr->next;
++		list_move(&qh->qh_list_entry, &hcd->periodic_sched_assigned);
++
++		ret_val = DWC_OTG_TRANSACTION_PERIODIC;
++	}
++
++	/*
++	 * Process entries in the inactive portion of the non-periodic
++	 * schedule. Some free host channels may not be used if they are
++	 * reserved for periodic transfers.
++	 */
++	qh_ptr = hcd->non_periodic_sched_inactive.next;
++	num_channels = hcd->core_if->core_params->host_channels;
++	while (qh_ptr != &hcd->non_periodic_sched_inactive &&
++	       (hcd->non_periodic_channels <
++		num_channels - hcd->periodic_channels) &&
++	       !list_empty(&hcd->free_hc_list)) {
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(hcd, qh);
++
++		/*
++		 * Move the QH from the non-periodic inactive schedule to the
++		 * non-periodic active schedule.
++		 */
++		qh_ptr = qh_ptr->next;
++		list_move(&qh->qh_list_entry, &hcd->non_periodic_sched_active);
++
++		if (ret_val == DWC_OTG_TRANSACTION_NONE) {
++			ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
++		} else {
++			ret_val = DWC_OTG_TRANSACTION_ALL;
++		}
++
++		hcd->non_periodic_channels++;
++	}
++
++	return ret_val;
++}
++
++/**
++ * Attempts to queue a single transaction request for a host channel
++ * associated with either a periodic or non-periodic transfer. This function
++ * assumes that there is space available in the appropriate request queue. For
++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
++ * is available in the appropriate Tx FIFO.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc Host channel descriptor associated with either a periodic or
++ * non-periodic transfer.
++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
++ * transfers.
++ *
++ * @return 1 if a request is queued and more requests may be needed to
++ * complete the transfer, 0 if no more requests are required for this
++ * transfer, -1 if there is insufficient space in the Tx FIFO.
++ */
++static int queue_transaction(dwc_otg_hcd_t *hcd,
++			     dwc_hc_t *hc,
++			     uint16_t fifo_dwords_avail)
++{
++	int retval;
++
++	if (hcd->core_if->dma_enable) {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++			hc->qh->ping_state = 0;
++		}
++		retval = 0;
++	} else if (hc->halt_pending) {
++		/* Don't queue a request if the channel has been halted. */
++		retval = 0;
++	} else if (hc->halt_on_queue) {
++		dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status);
++		retval = 0;
++	} else if (hc->do_ping) {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++		}
++		retval = 0;
++	} else if (!hc->ep_is_in ||
++		   hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		if ((fifo_dwords_avail * 4) >= hc->max_packet) {
++			if (!hc->xfer_started) {
++				dwc_otg_hc_start_transfer(hcd->core_if, hc);
++				retval = 1;
++			} else {
++				retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
++			}
++		} else {
++			retval = -1;
++		}
++	} else {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++			retval = 1;
++		} else {
++			retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
++		}
++	}
++
++	return retval;
++}
++
++/**
++ * Processes active non-periodic channels and queues transactions for these
++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
++ * FIFO Empty interrupt is enabled if there are more transactions to queue as
++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
++ * FIFO Empty interrupt is disabled.
++ */
++static void process_non_periodic_channels(dwc_otg_hcd_t *hcd)
++{
++	gnptxsts_data_t		tx_status;
++	struct list_head	*orig_qh_ptr;
++	dwc_otg_qh_t		*qh;
++	int			status;
++	int			no_queue_space = 0;
++	int			no_fifo_space = 0;
++	int			more_to_do = 0;
++
++	dwc_otg_core_global_regs_t *global_regs = hcd->core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
++#ifdef DEBUG
++	tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx Req Queue Space Avail (before queue): %d\n",
++		    tx_status.b.nptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (before queue): %d\n",
++		    tx_status.b.nptxfspcavail);
++#endif
++	/*
++	 * Keep track of the starting point. Skip over the start-of-list
++	 * entry.
++	 */
++	if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++	}
++	orig_qh_ptr = hcd->non_periodic_qh_ptr;
++
++	/*
++	 * Process once through the active list or until no more space is
++	 * available in the request queue or the Tx FIFO.
++	 */
++	do {
++		tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++		if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = list_entry(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		status = queue_transaction(hcd, qh->channel, tx_status.b.nptxfspcavail);
++
++		if (status > 0) {
++			more_to_do = 1;
++		} else if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/* Advance to next QH, skipping start-of-list entry. */
++		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++		if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++			hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++		}
++
++	} while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
++
++	if (!hcd->core_if->dma_enable) {
++		gintmsk_data_t intr_mask = {.d32 = 0};
++		intr_mask.b.nptxfempty = 1;
++
++#ifdef DEBUG
++		tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_HCDV, "  NP Tx Req Queue Space Avail (after queue): %d\n",
++			    tx_status.b.nptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (after queue): %d\n",
++			    tx_status.b.nptxfspcavail);
++#endif
++		if (more_to_do || no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the non-periodic
++			 * Tx FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++		}
++	}
++}
++
++/**
++ * Processes periodic channels for the next frame and queues transactions for
++ * these channels to the DWC_otg controller. After queueing transactions, the
++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
++ * to queue as Periodic Tx FIFO or request queue space becomes available.
++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
++ */
++static void process_periodic_channels(dwc_otg_hcd_t *hcd)
++{
++	hptxsts_data_t		tx_status;
++	struct list_head	*qh_ptr;
++	dwc_otg_qh_t		*qh;
++	int			status;
++	int 			no_queue_space = 0;
++	int			no_fifo_space = 0;
++
++	dwc_otg_host_global_regs_t *host_regs;
++	host_regs = hcd->core_if->host_if->host_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
++#ifdef DEBUG
++	tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx Req Queue Space Avail (before queue): %d\n",
++		    tx_status.b.ptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (before queue): %d\n",
++		    tx_status.b.ptxfspcavail);
++#endif
++
++	qh_ptr = hcd->periodic_sched_assigned.next;
++	while (qh_ptr != &hcd->periodic_sched_assigned) {
++		tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++		if (tx_status.b.ptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		/*
++		 * Set a flag if we're queuing high-bandwidth in slave mode.
++		 * The flag prevents any halts to get into the request queue in
++		 * the middle of multiple high-bandwidth packets getting queued.
++		 */
++		if (!hcd->core_if->dma_enable &&
++		    qh->channel->multi_count > 1)
++		{
++			hcd->core_if->queuing_high_bandwidth = 1;
++		}
++
++		status = queue_transaction(hcd, qh->channel, tx_status.b.ptxfspcavail);
++		if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/*
++		 * In Slave mode, stay on the current transfer until there is
++		 * nothing more to do or the high-bandwidth request count is
++		 * reached. In DMA mode, only need to queue one request. The
++		 * controller automatically handles multiple packets for
++		 * high-bandwidth transfers.
++		 */
++		if (hcd->core_if->dma_enable || status == 0 ||
++		    qh->channel->requests == qh->channel->multi_count) {
++			qh_ptr = qh_ptr->next;
++			/*
++			 * Move the QH from the periodic assigned schedule to
++			 * the periodic queued schedule.
++			 */
++			list_move(&qh->qh_list_entry, &hcd->periodic_sched_queued);
++
++			/* done queuing high bandwidth */
++			hcd->core_if->queuing_high_bandwidth = 0;
++		}
++	}
++
++	if (!hcd->core_if->dma_enable) {
++		dwc_otg_core_global_regs_t *global_regs;
++		gintmsk_data_t intr_mask = {.d32 = 0};
++
++		global_regs = hcd->core_if->core_global_regs;
++		intr_mask.b.ptxfempty = 1;
++#ifdef DEBUG
++		tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++		DWC_DEBUGPL(DBG_HCDV, "  P Tx Req Queue Space Avail (after queue): %d\n",
++			    tx_status.b.ptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (after queue): %d\n",
++			    tx_status.b.ptxfspcavail);
++#endif
++		if (!list_empty(&hcd->periodic_sched_assigned) ||
++		    no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the periodic Tx
++			 * FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++		}
++	}
++}
++
++/**
++ * This function processes the currently active host channels and queues
++ * transactions for these channels to the DWC_otg controller. It is called
++ * from HCD interrupt handler functions.
++ *
++ * @param hcd The HCD state structure.
++ * @param tr_type The type(s) of transactions to queue (non-periodic,
++ * periodic, or both).
++ */
++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
++				    dwc_otg_transaction_type_e tr_type)
++{
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
++#endif
++	/* Process host channels associated with periodic transfers. */
++	if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
++	     tr_type == DWC_OTG_TRANSACTION_ALL) &&
++	    !list_empty(&hcd->periodic_sched_assigned)) {
++
++		process_periodic_channels(hcd);
++	}
++
++	/* Process host channels associated with non-periodic transfers. */
++	if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
++	    tr_type == DWC_OTG_TRANSACTION_ALL) {
++		if (!list_empty(&hcd->non_periodic_sched_active)) {
++			process_non_periodic_channels(hcd);
++		} else {
++			/*
++			 * Ensure NP Tx FIFO empty interrupt is disabled when
++			 * there are no non-periodic transfers to process.
++			 */
++			gintmsk_data_t gintmsk = {.d32 = 0};
++			gintmsk.b.nptxfempty = 1;
++			dwc_modify_reg32(&hcd->core_if->core_global_regs->gintmsk,
++					 gintmsk.d32, 0);
++		}
++	}
++}
++
++/**
++ * Sets the final status of an URB and returns it to the device driver. Any
++ * required cleanup of the URB is performed.
++ */
++void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *hcd, struct urb *urb, int status)
++{
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
++			  __func__, urb, usb_pipedevice(urb->pipe),
++			  usb_pipeendpoint(urb->pipe),
++			  usb_pipein(urb->pipe) ? "IN" : "OUT", status);
++		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++			int i;
++			for (i = 0; i < urb->number_of_packets; i++) {
++				DWC_PRINT("  ISO Desc %d status: %d\n",
++					  i, urb->iso_frame_desc[i].status);
++			}
++		}
++	}
++#endif
++
++	urb->status = status;
++	urb->hcpriv = NULL;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++	usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status);
++#else
++	usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, NULL);
++#endif
++}
++
++/*
++ * Returns the Queue Head for an URB.
++ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb)
++{
++	struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
++	return (dwc_otg_qh_t *)ep->hcpriv;
++}
++
++#ifdef DEBUG
++void dwc_print_setup_data(uint8_t *setup)
++{
++	int i;
++	if (CHK_DEBUG_LEVEL(DBG_HCD)){
++		DWC_PRINT("Setup Data = MSB ");
++		for (i = 7; i >= 0; i--) DWC_PRINT("%02x ", setup[i]);
++		DWC_PRINT("\n");
++		DWC_PRINT("  bmRequestType Tranfer = %s\n", (setup[0] & 0x80) ? "Device-to-Host" : "Host-to-Device");
++		DWC_PRINT("  bmRequestType Type = ");
++		switch ((setup[0] & 0x60) >> 5) {
++		case 0: DWC_PRINT("Standard\n"); break;
++		case 1:	DWC_PRINT("Class\n"); break;
++		case 2:	DWC_PRINT("Vendor\n"); break;
++		case 3: DWC_PRINT("Reserved\n"); break;
++		}
++		DWC_PRINT("  bmRequestType Recipient = ");
++		switch (setup[0] & 0x1f) {
++		case 0: DWC_PRINT("Device\n"); break;
++		case 1: DWC_PRINT("Interface\n"); break;
++		case 2: DWC_PRINT("Endpoint\n"); break;
++		case 3: DWC_PRINT("Other\n"); break;
++		default: DWC_PRINT("Reserved\n"); break;
++		}
++		DWC_PRINT("  bRequest = 0x%0x\n", setup[1]);
++		DWC_PRINT("  wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
++		DWC_PRINT("  wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
++		DWC_PRINT("  wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
++	}
++}
++#endif
++
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd) {
++#if defined(DEBUG) && LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++	DWC_PRINT("Frame remaining at SOF:\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++		  hcd->frrem_samples, hcd->frrem_accum,
++		  (hcd->frrem_samples > 0) ?
++		  hcd->frrem_accum/hcd->frrem_samples : 0);
++
++	DWC_PRINT("\n");
++	DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++		  hcd->core_if->hfnum_7_samples, hcd->core_if->hfnum_7_frrem_accum,
++		  (hcd->core_if->hfnum_7_samples > 0) ?
++		  hcd->core_if->hfnum_7_frrem_accum/hcd->core_if->hfnum_7_samples : 0);
++	DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++		  hcd->core_if->hfnum_0_samples, hcd->core_if->hfnum_0_frrem_accum,
++		  (hcd->core_if->hfnum_0_samples > 0) ?
++		  hcd->core_if->hfnum_0_frrem_accum/hcd->core_if->hfnum_0_samples : 0);
++	DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++		  hcd->core_if->hfnum_other_samples, hcd->core_if->hfnum_other_frrem_accum,
++		  (hcd->core_if->hfnum_other_samples > 0) ?
++		  hcd->core_if->hfnum_other_frrem_accum/hcd->core_if->hfnum_other_samples : 0);
++
++	DWC_PRINT("\n");
++	DWC_PRINT("Frame remaining at sample point A (uframe 7):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++		  hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a,
++		  (hcd->hfnum_7_samples_a > 0) ?
++		  hcd->hfnum_7_frrem_accum_a/hcd->hfnum_7_samples_a : 0);
++	DWC_PRINT("Frame remaining at sample point A (uframe 0):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++		  hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a,
++		  (hcd->hfnum_0_samples_a > 0) ?
++		  hcd->hfnum_0_frrem_accum_a/hcd->hfnum_0_samples_a : 0);
++	DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++		  hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a,
++		  (hcd->hfnum_other_samples_a > 0) ?
++		  hcd->hfnum_other_frrem_accum_a/hcd->hfnum_other_samples_a : 0);
++
++	DWC_PRINT("\n");
++	DWC_PRINT("Frame remaining at sample point B (uframe 7):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++		  hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b,
++		  (hcd->hfnum_7_samples_b > 0) ?
++		  hcd->hfnum_7_frrem_accum_b/hcd->hfnum_7_samples_b : 0);
++	DWC_PRINT("Frame remaining at sample point B (uframe 0):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++		  hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b,
++		  (hcd->hfnum_0_samples_b > 0) ?
++		  hcd->hfnum_0_frrem_accum_b/hcd->hfnum_0_samples_b : 0);
++	DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++		  hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b,
++		  (hcd->hfnum_other_samples_b > 0) ?
++		  hcd->hfnum_other_frrem_accum_b/hcd->hfnum_other_samples_b : 0);
++#endif
++}
++
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd)
++{
++#ifdef DEBUG
++	int num_channels;
++	int i;
++	gnptxsts_data_t	np_tx_status;
++	hptxsts_data_t p_tx_status;
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	DWC_PRINT("\n");
++	DWC_PRINT("************************************************************\n");
++	DWC_PRINT("HCD State:\n");
++	DWC_PRINT("  Num channels: %d\n", num_channels);
++	for (i = 0; i < num_channels; i++) {
++		dwc_hc_t *hc = hcd->hc_ptr_array[i];
++		DWC_PRINT("  Channel %d:\n", i);
++		DWC_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++			  hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINT("    speed: %d\n", hc->speed);
++		DWC_PRINT("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINT("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINT("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINT("    multi_count: %d\n", hc->multi_count);
++		DWC_PRINT("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINT("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINT("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINT("    xfer_count: %d\n", hc->xfer_count);
++		DWC_PRINT("    halt_on_queue: %d\n", hc->halt_on_queue);
++		DWC_PRINT("    halt_pending: %d\n", hc->halt_pending);
++		DWC_PRINT("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINT("    do_split: %d\n", hc->do_split);
++		DWC_PRINT("    complete_split: %d\n", hc->complete_split);
++		DWC_PRINT("    hub_addr: %d\n", hc->hub_addr);
++		DWC_PRINT("    port_addr: %d\n", hc->port_addr);
++		DWC_PRINT("    xact_pos: %d\n", hc->xact_pos);
++		DWC_PRINT("    requests: %d\n", hc->requests);
++		DWC_PRINT("    qh: %p\n", hc->qh);
++		if (hc->xfer_started) {
++			hfnum_data_t hfnum;
++			hcchar_data_t hcchar;
++			hctsiz_data_t hctsiz;
++			hcint_data_t hcint;
++			hcintmsk_data_t hcintmsk;
++			hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
++			hcchar.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcchar);
++			hctsiz.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hctsiz);
++			hcint.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcint);
++			hcintmsk.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcintmsk);
++			DWC_PRINT("    hfnum: 0x%08x\n", hfnum.d32);
++			DWC_PRINT("    hcchar: 0x%08x\n", hcchar.d32);
++			DWC_PRINT("    hctsiz: 0x%08x\n", hctsiz.d32);
++			DWC_PRINT("    hcint: 0x%08x\n", hcint.d32);
++			DWC_PRINT("    hcintmsk: 0x%08x\n", hcintmsk.d32);
++		}
++		if (hc->xfer_started && hc->qh && hc->qh->qtd_in_process) {
++			dwc_otg_qtd_t *qtd;
++			struct urb *urb;
++			qtd = hc->qh->qtd_in_process;
++			urb = qtd->urb;
++			DWC_PRINT("    URB Info:\n");
++			DWC_PRINT("      qtd: %p, urb: %p\n", qtd, urb);
++			if (urb) {
++				DWC_PRINT("      Dev: %d, EP: %d %s\n",
++					  usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
++					  usb_pipein(urb->pipe) ? "IN" : "OUT");
++				DWC_PRINT("      Max packet size: %d\n",
++					  usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++				DWC_PRINT("      transfer_buffer: %p\n", urb->transfer_buffer);
++				DWC_PRINT("      transfer_dma: %p\n", (void *)urb->transfer_dma);
++				DWC_PRINT("      transfer_buffer_length: %d\n", urb->transfer_buffer_length);
++				DWC_PRINT("      actual_length: %d\n", urb->actual_length);
++			}
++		}
++	}
++	DWC_PRINT("  non_periodic_channels: %d\n", hcd->non_periodic_channels);
++	DWC_PRINT("  periodic_channels: %d\n", hcd->periodic_channels);
++	DWC_PRINT("  periodic_usecs: %d\n", hcd->periodic_usecs);
++	np_tx_status.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts);
++	DWC_PRINT("  NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
++	DWC_PRINT("  NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
++	p_tx_status.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts);
++	DWC_PRINT("  P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
++	DWC_PRINT("  P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
++	dwc_otg_hcd_dump_frrem(hcd);
++	dwc_otg_dump_global_registers(hcd->core_if);
++	dwc_otg_dump_host_registers(hcd->core_if);
++	DWC_PRINT("************************************************************\n");
++	DWC_PRINT("\n");
++#endif
++}
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.h
+@@ -0,0 +1,668 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
++ * $Revision: 1.3 $
++ * $Date: 2008-12-15 06:51:32 $
++ * $Change: 1064918 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#ifndef __DWC_HCD_H__
++#define __DWC_HCD_H__
++
++#include <linux/list.h>
++#include <linux/usb.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)
++#include <linux/usb/hcd.h>
++#else
++#include <../drivers/usb/core/hcd.h>
++#endif
++
++struct dwc_otg_device;
++
++#include "dwc_otg_cil.h"
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Host Contoller Driver (HCD).
++ *
++ * The Host Controller Driver (HCD) is responsible for translating requests
++ * from the USB Driver into the appropriate actions on the DWC_otg controller.
++ * It isolates the USBD from the specifics of the controller by providing an
++ * API to the USBD.
++ */
++
++/**
++ * Phases for control transfers.
++ */
++typedef enum dwc_otg_control_phase {
++	DWC_OTG_CONTROL_SETUP,
++	DWC_OTG_CONTROL_DATA,
++	DWC_OTG_CONTROL_STATUS
++} dwc_otg_control_phase_e;
++
++/** Transaction types. */
++typedef enum dwc_otg_transaction_type {
++	DWC_OTG_TRANSACTION_NONE,
++	DWC_OTG_TRANSACTION_PERIODIC,
++	DWC_OTG_TRANSACTION_NON_PERIODIC,
++	DWC_OTG_TRANSACTION_ALL
++} dwc_otg_transaction_type_e;
++
++/**
++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
++ * interrupt, or isochronous transfer. A single QTD is created for each URB
++ * (of one of these types) submitted to the HCD. The transfer associated with
++ * a QTD may require one or multiple transactions.
++ *
++ * A QTD is linked to a Queue Head, which is entered in either the
++ * non-periodic or periodic schedule for execution. When a QTD is chosen for
++ * execution, some or all of its transactions may be executed. After
++ * execution, the state of the QTD is updated. The QTD may be retired if all
++ * its transactions are complete or if an error occurred. Otherwise, it
++ * remains in the schedule so more transactions can be executed later.
++ */
++typedef struct dwc_otg_qtd {
++	/**
++	 * Determines the PID of the next data packet for the data phase of
++	 * control transfers. Ignored for other transfer types.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t			data_toggle;
++
++	/** Current phase for control transfers (Setup, Data, or Status). */
++	dwc_otg_control_phase_e	control_phase;
++
++	/** Keep track of the current split type
++	 * for FS/LS endpoints on a HS Hub */
++	uint8_t			complete_split;
++
++	/** How many bytes transferred during SSPLIT OUT */
++	uint32_t		ssplit_out_xfer_count;
++
++	/**
++	 * Holds the number of bus errors that have occurred for a transaction
++	 * within this transfer.
++	 */
++	uint8_t			error_count;
++
++	/**
++	 * Index of the next frame descriptor for an isochronous transfer. A
++	 * frame descriptor describes the buffer position and length of the
++	 * data to be transferred in the next scheduled (micro)frame of an
++	 * isochronous transfer. It also holds status for that transaction.
++	 * The frame index starts at 0.
++	 */
++	int			isoc_frame_index;
++
++	/** Position of the ISOC split on full/low speed */
++	uint8_t			isoc_split_pos;
++
++	/** Position of the ISOC split in the buffer for the current frame */
++	uint16_t		isoc_split_offset;
++
++	/** URB for this transfer */
++	struct urb		*urb;
++
++	/** This list of QTDs */
++	struct list_head	qtd_list_entry;
++
++} dwc_otg_qtd_t;
++
++/**
++ * A Queue Head (QH) holds the static characteristics of an endpoint and
++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
++ * be entered in either the non-periodic or periodic schedule.
++ */
++typedef struct dwc_otg_qh {
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- USB_ENDPOINT_XFER_CONTROL
++	 *	- USB_ENDPOINT_XFER_ISOC
++	 *	- USB_ENDPOINT_XFER_BULK
++	 *	- USB_ENDPOINT_XFER_INT
++	 */
++	uint8_t			ep_type;
++	uint8_t			ep_is_in;
++
++	/** wMaxPacketSize Field of Endpoint Descriptor. */
++	uint16_t		maxp;
++
++	/**
++	 * Determines the PID of the next data packet for non-control
++	 * transfers. Ignored for control transfers.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t			data_toggle;
++
++	/** Ping state if 1. */
++	uint8_t			ping_state;
++
++	/**
++	 * List of QTDs for this QH.
++	 */
++	struct list_head	qtd_list;
++
++	/** Host channel currently processing transfers for this QH. */
++	dwc_hc_t		*channel;
++
++	/** QTD currently assigned to a host channel for this QH. */
++	dwc_otg_qtd_t		*qtd_in_process;
++
++	/** Full/low speed endpoint on high-speed hub requires split. */
++	uint8_t			do_split;
++
++	/** @name Periodic schedule information */
++	/** @{ */
++
++	/** Bandwidth in microseconds per (micro)frame. */
++	uint8_t			usecs;
++
++	/** Interval between transfers in (micro)frames. */
++	uint16_t		interval;
++
++	/**
++	 * (micro)frame to initialize a periodic transfer. The transfer
++	 * executes in the following (micro)frame.
++	 */
++	uint16_t		sched_frame;
++
++	/** (micro)frame at which last start split was initialized. */
++	uint16_t		start_split_frame;
++
++	/** @} */
++
++	/** Entry for QH in either the periodic or non-periodic schedule. */
++	struct list_head	qh_list_entry;
++
++	/* For non-dword aligned buffer support */
++	uint8_t			*dw_align_buf;
++	dma_addr_t		dw_align_buf_dma;
++} dwc_otg_qh_t;
++
++/**
++ * This structure holds the state of the HCD, including the non-periodic and
++ * periodic schedules.
++ */
++typedef struct dwc_otg_hcd {
++	/** The DWC otg device pointer */
++	struct dwc_otg_device	*otg_dev;
++
++	/** DWC OTG Core Interface Layer */
++	dwc_otg_core_if_t	*core_if;
++
++	/** Internal DWC HCD Flags */
++	volatile union dwc_otg_hcd_internal_flags {
++		uint32_t d32;
++		struct {
++			unsigned port_connect_status_change : 1;
++			unsigned port_connect_status : 1;
++			unsigned port_reset_change : 1;
++			unsigned port_enable_change : 1;
++			unsigned port_suspend_change : 1;
++			unsigned port_over_current_change : 1;
++			unsigned reserved : 27;
++		} b;
++	} flags;
++
++	/**
++	 * Inactive items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are not
++	 * currently assigned to a host channel.
++	 */
++	struct list_head	non_periodic_sched_inactive;
++
++	/**
++	 * Active items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are
++	 * currently assigned to a host channel.
++	 */
++	struct list_head	non_periodic_sched_active;
++
++	/**
++	 * Pointer to the next Queue Head to process in the active
++	 * non-periodic schedule.
++	 */
++	struct list_head	*non_periodic_qh_ptr;
++
++	/**
++	 * Inactive items in the periodic schedule. This is a list of QHs for
++	 * periodic transfers that are _not_ scheduled for the next frame.
++	 * Each QH in the list has an interval counter that determines when it
++	 * needs to be scheduled for execution. This scheduling mechanism
++	 * allows only a simple calculation for periodic bandwidth used (i.e.
++	 * must assume that all periodic transfers may need to execute in the
++	 * same frame). However, it greatly simplifies scheduling and should
++	 * be sufficient for the vast majority of OTG hosts, which need to
++	 * connect to a small number of peripherals at one time.
++	 *
++	 * Items move from this list to periodic_sched_ready when the QH
++	 * interval counter is 0 at SOF.
++	 */
++	struct list_head	periodic_sched_inactive;
++
++	/**
++	 * List of periodic QHs that are ready for execution in the next
++	 * frame, but have not yet been assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_assigned as host
++	 * channels become available during the current frame.
++	 */
++	struct list_head	periodic_sched_ready;
++
++	/**
++	 * List of periodic QHs to be executed in the next frame that are
++	 * assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_queued as the
++	 * transactions for the QH are queued to the DWC_otg controller.
++	 */
++	struct list_head	periodic_sched_assigned;
++
++	/**
++	 * List of periodic QHs that have been queued for execution.
++	 *
++	 * Items move from this list to either periodic_sched_inactive or
++	 * periodic_sched_ready when the channel associated with the transfer
++	 * is released. If the interval for the QH is 1, the item moves to
++	 * periodic_sched_ready because it must be rescheduled for the next
++	 * frame. Otherwise, the item moves to periodic_sched_inactive.
++	 */
++	struct list_head	periodic_sched_queued;
++
++	/**
++	 * Total bandwidth claimed so far for periodic transfers. This value
++	 * is in microseconds per (micro)frame. The assumption is that all
++	 * periodic transfers may occur in the same (micro)frame.
++	 */
++	uint16_t		periodic_usecs;
++
++	/**
++	 * Frame number read from the core at SOF. The value ranges from 0 to
++	 * DWC_HFNUM_MAX_FRNUM.
++	 */
++	uint16_t		frame_number;
++
++	/**
++	 * Free host channels in the controller. This is a list of
++	 * dwc_hc_t items.
++	 */
++	struct list_head	free_hc_list;
++
++	/**
++	 * Number of host channels assigned to periodic transfers. Currently
++	 * assuming that there is a dedicated host channel for each periodic
++	 * transaction and at least one host channel available for
++	 * non-periodic transactions.
++	 */
++	int			periodic_channels;
++
++	/**
++	 * Number of host channels assigned to non-periodic transfers.
++	 */
++	int			non_periodic_channels;
++
++	/**
++	 * Array of pointers to the host channel descriptors. Allows accessing
++	 * a host channel descriptor given the host channel number. This is
++	 * useful in interrupt handlers.
++	 */
++	dwc_hc_t		*hc_ptr_array[MAX_EPS_CHANNELS];
++
++	/**
++	 * Buffer to use for any data received during the status phase of a
++	 * control transfer. Normally no data is transferred during the status
++	 * phase. This buffer is used as a bit bucket.
++	 */
++	uint8_t			*status_buf;
++
++	/**
++	 * DMA address for status_buf.
++	 */
++	dma_addr_t		status_buf_dma;
++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
++
++	/**
++	 * Structure to allow starting the HCD in a non-interrupt context
++	 * during an OTG role change.
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++	struct work_struct	start_work;
++#else
++	struct delayed_work	start_work;
++#endif
++
++	/**
++	 * Connection timer. An OTG host must display a message if the device
++	 * does not connect. Started when the VBus power is turned on via
++	 * sysfs attribute "buspower".
++	 */
++	struct timer_list	conn_timer;
++
++	/* Tasket to do a reset */
++	struct tasklet_struct	*reset_tasklet;
++
++	/*  */
++	spinlock_t lock;
++
++#ifdef DEBUG
++	uint32_t		frrem_samples;
++	uint64_t		frrem_accum;
++
++	uint32_t		hfnum_7_samples_a;
++	uint64_t		hfnum_7_frrem_accum_a;
++	uint32_t		hfnum_0_samples_a;
++	uint64_t		hfnum_0_frrem_accum_a;
++	uint32_t		hfnum_other_samples_a;
++	uint64_t		hfnum_other_frrem_accum_a;
++
++	uint32_t		hfnum_7_samples_b;
++	uint64_t		hfnum_7_frrem_accum_b;
++	uint32_t		hfnum_0_samples_b;
++	uint64_t		hfnum_0_frrem_accum_b;
++	uint32_t		hfnum_other_samples_b;
++	uint64_t		hfnum_other_frrem_accum_b;
++#endif
++} dwc_otg_hcd_t;
++
++/** Gets the dwc_otg_hcd from a struct usb_hcd */
++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
++{
++	return (dwc_otg_hcd_t *)(hcd->hcd_priv);
++}
++
++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
++}
++
++/** @name HCD Create/Destroy Functions */
++/** @{ */
++extern int dwc_otg_hcd_init(struct device *dev);
++extern void dwc_otg_hcd_remove(struct device *dev);
++/** @} */
++
++/** @name Linux HC Driver API Functions */
++/** @{ */
++
++extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
++extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
++extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
++				   struct urb *urb,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++				   int mem_flags
++#else
++				   gfp_t mem_flags
++#endif
++				  );
++extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++#endif
++				   struct urb *urb, int status);
++extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
++					 struct usb_host_endpoint *ep);
++extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++				   , struct pt_regs *regs
++#endif
++				  );
++extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd,
++				       char *buf);
++extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
++				   u16 typeReq,
++				   u16 wValue,
++				   u16 wIndex,
++				   char *buf,
++				   u16 wLength);
++
++/** @} */
++
++/** @name Transaction Execution Functions */
++/** @{ */
++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd);
++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
++					   dwc_otg_transaction_type_e tr_type);
++extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *urb,
++				     int status);
++/** @} */
++
++/** @name Interrupt Handler Functions */
++/** @{ */
++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num);
++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++/** @} */
++
++
++/** @name Schedule Queue Functions */
++/** @{ */
++
++/* Implemented in dwc_otg_hcd_queue.c */
++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t *hcd, struct urb *urb);
++extern void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb);
++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_csplit);
++
++/** Remove and free a QH */
++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t *hcd,
++						  dwc_otg_qh_t *qh)
++{
++	dwc_otg_hcd_qh_remove(hcd, qh);
++	dwc_otg_hcd_qh_free(hcd, qh);
++}
++
++/** Allocates memory for a QH structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(void)
++{
++	return (dwc_otg_qh_t *) kmalloc(sizeof(dwc_otg_qh_t), GFP_KERNEL);
++}
++
++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(struct urb *urb);
++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t *qtd, struct urb *urb);
++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
++
++/** Allocates memory for a QTD structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(void)
++{
++	return (dwc_otg_qtd_t *) kmalloc(sizeof(dwc_otg_qtd_t), GFP_KERNEL);
++}
++
++/** Frees the memory for a QTD structure.  QTD should already be removed from
++ * list.
++ * @param[in] qtd QTD to free.*/
++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t *qtd)
++{
++	kfree(qtd);
++}
++
++/** Removes a QTD from list.
++ * @param[in] hcd HCD instance.
++ * @param[in] qtd QTD to remove from list. */
++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
++{
++	unsigned long flags;
++	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
++	list_del(&qtd->qtd_list_entry);
++	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
++}
++
++/** Remove and free a QTD */
++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
++{
++	dwc_otg_hcd_qtd_remove(hcd, qtd);
++	dwc_otg_hcd_qtd_free(qtd);
++}
++
++/** @} */
++
++
++/** @name Internal Functions */
++/** @{ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb);
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd);
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd);
++/** @} */
++
++/** Gets the usb_host_endpoint associated with an URB. */
++static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
++{
++	struct usb_device *dev = urb->dev;
++	int ep_num = usb_pipeendpoint(urb->pipe);
++
++	if (usb_pipein(urb->pipe))
++		return dev->ep_in[ep_num];
++	else
++		return dev->ep_out[ep_num];
++}
++
++/**
++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++						     ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++/** Gets the QH that contains the list_head */
++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
++
++/** Gets the QTD that contains the list_head */
++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
++
++/** Check if QH is non-periodic  */
++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
++				     (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
++
++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
++
++/** Packet size for any kind of endpoint descriptor */
++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
++
++/**
++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
++ * frame number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
++{
++	return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
++		(DWC_HFNUM_MAX_FRNUM >> 1);
++}
++
++/**
++ * Returns true if _frame1 is greater than _frame2. The comparison is done
++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
++ * number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
++{
++	return (frame1 != frame2) &&
++		(((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
++		 (DWC_HFNUM_MAX_FRNUM >> 1));
++}
++
++/**
++ * Increments _frame by the amount specified by _inc. The addition is done
++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
++ */
++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
++{
++	return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
++}
++
++static inline uint16_t dwc_full_frame_num(uint16_t frame)
++{
++	return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
++}
++
++static inline uint16_t dwc_micro_frame_num(uint16_t frame)
++{
++	return frame & 0x7;
++}
++
++#ifdef DEBUG
++/**
++ * Macro to sample the remaining PHY clocks left in the current frame. This
++ * may be used during debugging to determine the average time it takes to
++ * execute sections of code. There are two possible sample points, "a" and
++ * "b", so the _letter argument must be one of these values.
++ *
++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
++ * example, "cat /sys/devices/lm0/hcd_frrem".
++ */
++#define dwc_sample_frrem(_hcd, _qh, _letter) \
++{ \
++	hfnum_data_t hfnum; \
++	dwc_otg_qtd_t *qtd; \
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
++	if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
++		hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
++		switch (hfnum.b.frnum & 0x7) { \
++		case 7: \
++			_hcd->hfnum_7_samples_##_letter++; \
++			_hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		case 0: \
++			_hcd->hfnum_0_samples_##_letter++; \
++			_hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		default: \
++			_hcd->hfnum_other_samples_##_letter++; \
++			_hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		} \
++	} \
++}
++#else
++#define dwc_sample_frrem(_hcd, _qh, _letter)
++#endif
++#endif
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+@@ -0,0 +1,1873 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
++ * $Revision: 1.6.2.1 $
++ * $Date: 2009-04-22 03:48:22 $
++ * $Change: 1117667 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++#include <linux/version.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++/** @file
++ * This file contains the implementation of the HCD Interrupt handlers.
++ */
++
++/** This function handles interrupts for the HCD. */
++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	int retval = 0;
++
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	gintsts_data_t gintsts;
++#ifdef DEBUG
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++#endif
++
++	/* Check if HOST Mode */
++	if (dwc_otg_is_host_mode(core_if)) {
++		gintsts.d32 = dwc_otg_read_core_intr(core_if);
++		if (!gintsts.d32) {
++			return 0;
++		}
++
++#ifdef DEBUG
++		/* Don't print debug message in the interrupt handler on SOF */
++# ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++			DWC_DEBUGPL(DBG_HCD, "\n");
++#endif
++
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
++#endif
++		if (gintsts.b.usbreset) {
++			DWC_PRINT("Usb Reset In Host Mode\n");
++		}
++
++
++		if (gintsts.b.sofintr) {
++			retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.rxstsqlvl) {
++			retval |= dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.nptxfempty) {
++			retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.i2cintr) {
++			/** @todo Implement i2cintr handler. */
++		}
++		if (gintsts.b.portintr) {
++			retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.hcintr) {
++			retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.ptxfempty) {
++			retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd);
++		}
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++		{
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
++				    dwc_read_reg32(&global_regs->gintsts));
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
++				    dwc_read_reg32(&global_regs->gintmsk));
++		}
++#endif
++
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++	if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++		DWC_DEBUGPL(DBG_HCD, "\n");
++#endif
++
++	}
++
++	S3C2410X_CLEAR_EINTPEND();
++
++	return retval;
++}
++
++#ifdef DWC_TRACK_MISSED_SOFS
++#warning Compiling code to track missed SOFs
++#define FRAME_NUM_ARRAY_SIZE 1000
++/**
++ * This function is for debug only.
++ */
++static inline void track_missed_sofs(uint16_t curr_frame_number)
++{
++	static uint16_t		frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static uint16_t		last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static int		frame_num_idx = 0;
++	static uint16_t		last_frame_num = DWC_HFNUM_MAX_FRNUM;
++	static int		dumped_frame_num_array = 0;
++
++	if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
++		if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != curr_frame_number) {
++			frame_num_array[frame_num_idx] = curr_frame_number;
++			last_frame_num_array[frame_num_idx++] = last_frame_num;
++		}
++	} else if (!dumped_frame_num_array) {
++		int i;
++		printk(KERN_EMERG USB_DWC "Frame     Last Frame\n");
++		printk(KERN_EMERG USB_DWC "-----     ----------\n");
++		for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
++			printk(KERN_EMERG USB_DWC "0x%04x    0x%04x\n",
++			       frame_num_array[i], last_frame_num_array[i]);
++		}
++		dumped_frame_num_array = 1;
++	}
++	last_frame_num = curr_frame_number;
++}
++#endif
++
++/**
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *hcd)
++{
++	hfnum_data_t		hfnum;
++	struct list_head	*qh_entry;
++	dwc_otg_qh_t		*qh;
++	dwc_otg_transaction_type_e tr_type;
++	gintsts_data_t gintsts = {.d32 = 0};
++
++	hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
++#endif
++	hcd->frame_number = hfnum.b.frnum;
++
++#ifdef DEBUG
++	hcd->frrem_accum += hfnum.b.frrem;
++	hcd->frrem_samples++;
++#endif
++
++#ifdef DWC_TRACK_MISSED_SOFS
++	track_missed_sofs(hcd->frame_number);
++#endif
++
++	/* Determine whether any periodic QHs should be executed. */
++	qh_entry = hcd->periodic_sched_inactive.next;
++	while (qh_entry != &hcd->periodic_sched_inactive) {
++		qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
++		qh_entry = qh_entry->next;
++		if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
++			/*
++			 * Move QH to the ready list to be executed next
++			 * (micro)frame.
++			 */
++			list_move(&qh->qh_list_entry, &hcd->periodic_sched_ready);
++		}
++	}
++
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++
++	/* Clear interrupt */
++	gintsts.b.sofintr = 1;
++	dwc_write_reg32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
++ * least one packet in the Rx FIFO.  The packets are moved from the FIFO to
++ * memory if the DWC_otg controller is operating in Slave mode. */
++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	host_grxsts_data_t grxsts;
++	dwc_hc_t *hc = NULL;
++
++	DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
++
++	grxsts.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
++
++	hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
++
++	/* Packet Status */
++	DWC_DEBUGPL(DBG_HCDV, "    Ch num = %d\n", grxsts.b.chnum);
++	DWC_DEBUGPL(DBG_HCDV, "    Count = %d\n", grxsts.b.bcnt);
++	DWC_DEBUGPL(DBG_HCDV, "    DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
++	DWC_DEBUGPL(DBG_HCDV, "    PStatus = %d\n", grxsts.b.pktsts);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer. */
++		if (grxsts.b.bcnt > 0) {
++			dwc_otg_read_packet(dwc_otg_hcd->core_if,
++					    hc->xfer_buff,
++					    grxsts.b.bcnt);
++
++			/* Update the HC fields for the next packet received. */
++			hc->xfer_count += grxsts.b.bcnt;
++			hc->xfer_buff += grxsts.b.bcnt;
++		}
++
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++	case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
++	case DWC_GRXSTS_PKTSTS_CH_HALTED:
++		/* Handled in interrupt, just ignore data */
++		break;
++	default:
++		DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
++		break;
++	}
++
++	return 1;
++}
++
++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
++ * data packets may be written to the FIFO for OUT transfers. More requests
++ * may be written to the non-periodic request queue for IN transfers. This
++ * interrupt is enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_NON_PERIODIC);
++	return 1;
++}
++
++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
++ * packets may be written to the FIFO for OUT transfers. More requests may be
++ * written to the periodic request queue for IN transfers. This interrupt is
++ * enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_PERIODIC);
++	return 1;
++}
++
++/** There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	int retval = 0;
++	hprt0_data_t hprt0;
++	hprt0_data_t hprt0_modify;
++
++	hprt0.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
++	hprt0_modify.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
++
++	/* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++	 * GINTSTS */
++
++	hprt0_modify.b.prtena = 0;
++	hprt0_modify.b.prtconndet = 0;
++	hprt0_modify.b.prtenchng = 0;
++	hprt0_modify.b.prtovrcurrchng = 0;
++
++	/* Port Connect Detected
++	 * Set flag and clear if detected */
++	if (hprt0.b.prtconndet) {
++		DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++			    "Port Connect Detected--\n", hprt0.d32);
++		dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++		dwc_otg_hcd->flags.b.port_connect_status = 1;
++		hprt0_modify.b.prtconndet = 1;
++
++		/* B-Device has connected, Delete the connection timer. */
++		del_timer( &dwc_otg_hcd->conn_timer );
++
++		/* The Hub driver asserts a reset when it sees port connect
++		 * status change flag */
++		retval |= 1;
++	}
++
++	/* Port Enable Changed
++	 * Clear if detected - Set internal flag if disabled */
++	if (hprt0.b.prtenchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Enable Changed--\n", hprt0.d32);
++		hprt0_modify.b.prtenchng = 1;
++		if (hprt0.b.prtena == 1) {
++			int do_reset = 0;
++			dwc_otg_core_params_t *params = dwc_otg_hcd->core_if->core_params;
++			dwc_otg_core_global_regs_t *global_regs = dwc_otg_hcd->core_if->core_global_regs;
++			dwc_otg_host_if_t *host_if = dwc_otg_hcd->core_if->host_if;
++
++			/* Check if we need to adjust the PHY clock speed for
++			 * low power and adjust it */
++			if (params->host_support_fs_ls_low_power) {
++				gusbcfg_data_t usbcfg;
++
++				usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++
++				if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ||
++				    hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) {
++					/*
++					 * Low power
++					 */
++					hcfg_data_t hcfg;
++					if (usbcfg.b.phylpwrclksel == 0) {
++						/* Set PHY low power clock select for FS/LS devices */
++						usbcfg.b.phylpwrclksel = 1;
++						dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++						do_reset = 1;
++					}
++
++					hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++
++					if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED &&
++					    params->host_ls_low_power_phy_clk ==
++					     DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) {
++						/* 6 MHZ */
++						DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
++						if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
++							hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
++							dwc_write_reg32(&host_if->host_global_regs->hcfg,
++									hcfg.d32);
++							do_reset = 1;
++						}
++					} else {
++						/* 48 MHZ */
++						DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
++						if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
++							hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
++							dwc_write_reg32(&host_if->host_global_regs->hcfg,
++									hcfg.d32);
++							do_reset = 1;
++						}
++					}
++				} else {
++					/*
++					 * Not low power
++					 */
++					if (usbcfg.b.phylpwrclksel == 1) {
++						usbcfg.b.phylpwrclksel = 0;
++						dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++						do_reset = 1;
++					}
++				}
++
++				if (do_reset) {
++					tasklet_schedule(dwc_otg_hcd->reset_tasklet);
++				}
++			}
++
++			if (!do_reset) {
++				/* Port has been enabled set the reset change flag */
++				dwc_otg_hcd->flags.b.port_reset_change = 1;
++			}
++		} else {
++			dwc_otg_hcd->flags.b.port_enable_change = 1;
++		}
++		retval |= 1;
++	}
++
++	/** Overcurrent Change Interrupt */
++	if (hprt0.b.prtovrcurrchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Overcurrent Changed--\n", hprt0.d32);
++		dwc_otg_hcd->flags.b.port_over_current_change = 1;
++		hprt0_modify.b.prtovrcurrchng = 1;
++		retval |= 1;
++	}
++
++	/* Clear Port Interrupts */
++	dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++
++	return retval;
++}
++
++/** This interrupt indicates that one or more host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for each
++ * host channel interrupt and handles them appropriately. */
++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	int i;
++	int retval = 0;
++	haint_data_t haint;
++
++	/* Clear appropriate bits in HCINTn to clear the interrupt bit in
++	 * GINTSTS */
++
++	haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
++
++	for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
++		if (haint.b2.chint & (1 << i)) {
++			retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
++		}
++	}
++
++	return retval;
++}
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_, _intr_) \
++do { \
++	hcint_data_t hcint_clear = {.d32 = 0}; \
++	hcint_clear.b._intr_ = 1; \
++	dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \
++} while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_, _intr_) \
++do { \
++	hcintmsk_data_t hcintmsk = {.d32 = 0}; \
++	hcintmsk.b._intr_ = 1; \
++	dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
++} while (0)
++
++/**
++ * Gets the actual length of a transfer after the transfer halts. _halt_status
++ * holds the reason for the halt.
++ *
++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
++ * *short_read is set to 1 upon return if less than the requested
++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
++ * return. short_read may also be NULL on entry, in which case it remains
++ * unchanged.
++ */
++static uint32_t get_actual_xfer_length(dwc_hc_t *hc,
++				       dwc_otg_hc_regs_t *hc_regs,
++				       dwc_otg_qtd_t *qtd,
++				       dwc_otg_halt_status_e halt_status,
++				       int *short_read)
++{
++	hctsiz_data_t	hctsiz;
++	uint32_t	length;
++
++	if (short_read != NULL) {
++		*short_read = 0;
++	}
++	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++
++	if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++		if (hc->ep_is_in) {
++			length = hc->xfer_len - hctsiz.b.xfersize;
++			if (short_read != NULL) {
++				*short_read = (hctsiz.b.xfersize != 0);
++			}
++		} else if (hc->qh->do_split) {
++			length = qtd->ssplit_out_xfer_count;
++		} else {
++			length = hc->xfer_len;
++		}
++	} else {
++		/*
++		 * Must use the hctsiz.pktcnt field to determine how much data
++		 * has been transferred. This field reflects the number of
++		 * packets that have been transferred via the USB. This is
++		 * always an integral number of packets if the transfer was
++		 * halted before its normal completion. (Can't use the
++		 * hctsiz.xfersize field because that reflects the number of
++		 * bytes transferred via the AHB, not the USB).
++		 */
++		length = (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
++	}
++
++	return length;
++}
++
++/**
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished.
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(dwc_hc_t *hc,
++				      dwc_otg_hc_regs_t *hc_regs,
++				      struct urb *urb,
++				      dwc_otg_qtd_t *qtd)
++{
++	int		xfer_done = 0;
++	int		short_read = 0;
++	int		overflow_read=0;
++	uint32_t	len = 0;
++	int		max_packet;
++
++	len = get_actual_xfer_length(hc, hc_regs, qtd,
++				     DWC_OTG_HC_XFER_COMPLETE,
++				     &short_read);
++
++	/* Data overflow case: by Steven */
++	if (len > urb->transfer_buffer_length) {
++	    len = urb->transfer_buffer_length;
++	    overflow_read = 1;
++	}
++
++	/* non DWORD-aligned buffer case handling. */
++	if (((uint32_t)hc->xfer_buff & 0x3) && len && hc->qh->dw_align_buf && hc->ep_is_in) {
++		memcpy(urb->transfer_buffer + urb->actual_length, hc->qh->dw_align_buf, len);
++	}
++	urb->actual_length +=len;
++
++	max_packet = usb_maxpacket(urb->dev, urb->pipe, !usb_pipein(urb->pipe));
++	if((len) && usb_pipebulk(urb->pipe) &&
++	   (urb->transfer_flags & URB_ZERO_PACKET) &&
++	   (urb->actual_length == urb->transfer_buffer_length) &&
++	   (!(urb->transfer_buffer_length % max_packet))) {
++	} else if (short_read || urb->actual_length == urb->transfer_buffer_length) {
++		xfer_done = 1;
++		if (short_read && (urb->transfer_flags & URB_SHORT_NOT_OK)) {
++			urb->status = -EREMOTEIO;
++		} else if (overflow_read) {
++			urb->status = -EOVERFLOW;
++		} else {
++			urb->status = 0;
++		}
++	}
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t	hctsiz;
++		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->xfer_len %d\n", hc->xfer_len);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.xfersize %d\n", hctsiz.b.xfersize);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    urb->transfer_buffer_length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n", urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  short_read %d, xfer_done %d\n",
++			    short_read, xfer_done);
++	}
++#endif
++
++	return xfer_done;
++}
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++static void save_data_toggle(dwc_hc_t *hc,
++			     dwc_otg_hc_regs_t *hc_regs,
++			     dwc_otg_qtd_t *qtd)
++{
++	hctsiz_data_t hctsiz;
++	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++
++	if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
++		dwc_otg_qh_t *qh = hc->qh;
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	} else {
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	}
++}
++
++/**
++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
++ * still linked to the QH, the QH is added to the end of the inactive
++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
++ * schedule if no more QTDs are linked to the QH.
++ */
++static void deactivate_qh(dwc_otg_hcd_t *hcd,
++			  dwc_otg_qh_t *qh,
++			  int free_qtd)
++{
++	int continue_split = 0;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
++
++	qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++	if (qtd->complete_split) {
++		continue_split = 1;
++	} else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
++		   qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
++		continue_split = 1;
++	}
++
++	if (free_qtd) {
++		dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
++		continue_split = 0;
++	}
++
++	qh->channel = NULL;
++	qh->qtd_in_process = NULL;
++	dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
++}
++
++/**
++ * Updates the state of an Isochronous URB when the transfer is stopped for
++ * any reason. The fields of the current entry in the frame descriptor array
++ * are set based on the transfer state and the input _halt_status. Completes
++ * the Isochronous URB if all the URB frames have been completed.
++ *
++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
++ */
++static dwc_otg_halt_status_e
++update_isoc_urb_state(dwc_otg_hcd_t *hcd,
++		      dwc_hc_t *hc,
++		      dwc_otg_hc_regs_t *hc_regs,
++		      dwc_otg_qtd_t *qtd,
++		      dwc_otg_halt_status_e halt_status)
++{
++	struct urb *urb = qtd->urb;
++	dwc_otg_halt_status_e ret_val = halt_status;
++	struct usb_iso_packet_descriptor *frame_desc;
++
++	frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
++	switch (halt_status) {
++	case DWC_OTG_HC_XFER_COMPLETE:
++		frame_desc->status = 0;
++		frame_desc->actual_length =
++			get_actual_xfer_length(hc, hc_regs, qtd,
++					       halt_status, NULL);
++
++		/* non DWORD-aligned buffer case handling. */
++		if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) &&
++				hc->qh->dw_align_buf && hc->ep_is_in) {
++			memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset,
++				hc->qh->dw_align_buf, frame_desc->actual_length);
++
++		}
++
++		break;
++	case DWC_OTG_HC_XFER_FRAME_OVERRUN:
++		printk("DWC_OTG_HC_XFER_FRAME_OVERRUN: %d\n", halt_status);
++		urb->error_count++;
++		if (hc->ep_is_in) {
++			frame_desc->status = -ENOSR;
++		} else {
++			frame_desc->status = -ECOMM;
++		}
++		frame_desc->actual_length = 0;
++		break;
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		printk("DWC_OTG_HC_XFER_BABBLE_ERR: %d\n", halt_status);
++		urb->error_count++;
++		frame_desc->status = -EOVERFLOW;
++		/* Don't need to update actual_length in this case. */
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		printk("DWC_OTG_HC_XFER_XACT_ERR: %d\n", halt_status);
++		urb->error_count++;
++		frame_desc->status = -EPROTO;
++		frame_desc->actual_length =
++			get_actual_xfer_length(hc, hc_regs, qtd,
++					       halt_status, NULL);
++
++		/* non DWORD-aligned buffer case handling. */
++		if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) &&
++				hc->qh->dw_align_buf && hc->ep_is_in) {
++			memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset,
++				hc->qh->dw_align_buf, frame_desc->actual_length);
++
++		}
++		break;
++	default:
++
++		DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
++			  halt_status);
++		BUG();
++		break;
++	}
++
++	if (++qtd->isoc_frame_index == urb->number_of_packets) {
++		/*
++		 * urb->status is not used for isoc transfers.
++		 * The individual frame_desc statuses are used instead.
++		 */
++		dwc_otg_hcd_complete_urb(hcd, urb, 0);
++		ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
++	} else {
++		ret_val = DWC_OTG_HC_XFER_COMPLETE;
++	}
++
++	return ret_val;
++}
++
++/**
++ * Releases a host channel for use by other transfers. Attempts to select and
++ * queue more transactions since at least one host channel is available.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc The host channel to release.
++ * @param qtd The QTD associated with the host channel. This QTD may be freed
++ * if the transfer is complete or an error has occurred.
++ * @param halt_status Reason the channel is being released. This status
++ * determines the actions taken by this function.
++ */
++static void release_channel(dwc_otg_hcd_t *hcd,
++			    dwc_hc_t *hc,
++			    dwc_otg_qtd_t *qtd,
++			    dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_transaction_type_e tr_type;
++	int free_qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s: channel %d, halt_status %d\n",
++		    __func__, hc->hc_num, halt_status);
++
++	switch (halt_status) {
++	case DWC_OTG_HC_XFER_URB_COMPLETE:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_AHB_ERR:
++	case DWC_OTG_HC_XFER_STALL:
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		if (qtd->error_count >= 3) {
++			DWC_DEBUGPL(DBG_HCDV, "  Complete URB with transaction error\n");
++			free_qtd = 1;
++			qtd->urb->status = -EPROTO;
++			dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EPROTO);
++		} else {
++			free_qtd = 0;
++		}
++		break;
++	case DWC_OTG_HC_XFER_URB_DEQUEUE:
++		/*
++		 * The QTD has already been removed and the QH has been
++		 * deactivated. Don't want to do anything except release the
++		 * host channel and try to queue more transfers.
++		 */
++		goto cleanup;
++	case DWC_OTG_HC_XFER_NO_HALT_STATUS:
++		DWC_ERROR("%s: No halt_status, channel %d\n", __func__, hc->hc_num);
++		free_qtd = 0;
++		break;
++	default:
++		free_qtd = 0;
++		break;
++	}
++
++	deactivate_qh(hcd, hc->qh, free_qtd);
++
++ cleanup:
++	/*
++	 * Release the host channel for use by other transfers. The cleanup
++	 * function clears the channel interrupt enables and conditions, so
++	 * there's no need to clear the Channel Halted interrupt separately.
++	 */
++	dwc_otg_hc_cleanup(hcd->core_if, hc);
++	list_add_tail(&hc->hc_list_entry, &hcd->free_hc_list);
++
++	switch (hc->ep_type) {
++	case DWC_OTG_EP_TYPE_CONTROL:
++	case DWC_OTG_EP_TYPE_BULK:
++		hcd->non_periodic_channels--;
++		break;
++
++	default:
++		/*
++		 * Don't release reservations for periodic channels here.
++		 * That's done when a periodic transfer is descheduled (i.e.
++		 * when the QH is removed from the periodic schedule).
++		 */
++		break;
++	}
++
++	/* Try to queue more transfers now that there's a free channel. */
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++}
++
++/**
++ * Halts a host channel. If the channel cannot be halted immediately because
++ * the request queue is full, this function ensures that the FIFO empty
++ * interrupt for the appropriate queue is enabled so that the halt request can
++ * be queued when there is space in the request queue.
++ *
++ * This function may also be called in DMA mode. In that case, the channel is
++ * simply released since the core always halts the channel automatically in
++ * DMA mode.
++ */
++static void halt_channel(dwc_otg_hcd_t *hcd,
++			 dwc_hc_t *hc,
++			 dwc_otg_qtd_t *qtd,
++			 dwc_otg_halt_status_e halt_status)
++{
++	if (hcd->core_if->dma_enable) {
++		release_channel(hcd, hc, qtd, halt_status);
++		return;
++	}
++
++	/* Slave mode processing... */
++	dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
++
++	if (hc->halt_on_queue) {
++		gintmsk_data_t gintmsk = {.d32 = 0};
++		dwc_otg_core_global_regs_t *global_regs;
++		global_regs = hcd->core_if->core_global_regs;
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			/*
++			 * Make sure the Non-periodic Tx FIFO empty interrupt
++			 * is enabled so that the non-periodic schedule will
++			 * be processed.
++			 */
++			gintmsk.b.nptxfempty = 1;
++			dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++		} else {
++			/*
++			 * Move the QH from the periodic queued schedule to
++			 * the periodic assigned schedule. This allows the
++			 * halt to be queued when the periodic schedule is
++			 * processed.
++			 */
++			list_move(&hc->qh->qh_list_entry,
++				  &hcd->periodic_sched_assigned);
++
++			/*
++			 * Make sure the Periodic Tx FIFO Empty interrupt is
++			 * enabled so that the periodic schedule will be
++			 * processed.
++			 */
++			gintmsk.b.ptxfempty = 1;
++			dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++		}
++	}
++}
++
++/**
++ * Performs common cleanup for non-periodic transfers after a Transfer
++ * Complete interrupt. This function should be called after any endpoint type
++ * specific handling is finished to release the host channel.
++ */
++static void complete_non_periodic_xfer(dwc_otg_hcd_t *hcd,
++				       dwc_hc_t *hc,
++				       dwc_otg_hc_regs_t *hc_regs,
++				       dwc_otg_qtd_t *qtd,
++				       dwc_otg_halt_status_e halt_status)
++{
++	hcint_data_t hcint;
++
++	qtd->error_count = 0;
++
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	if (hcint.b.nyet) {
++		/*
++		 * Got a NYET on the last transaction of the transfer. This
++		 * means that the endpoint should be in the PING state at the
++		 * beginning of the next transfer.
++		 */
++		hc->qh->ping_state = 1;
++		clear_hc_int(hc_regs, nyet);
++	}
++
++	/*
++	 * Always halt and release the host channel to make it available for
++	 * more transfers. There may still be more phases for a control
++	 * transfer or more data packets for a bulk transfer at this point,
++	 * but the host channel is still halted. A channel will be reassigned
++	 * to the transfer when the non-periodic schedule is processed after
++	 * the channel is released. This allows transactions to be queued
++	 * properly via dwc_otg_hcd_queue_transactions, which also enables the
++	 * Tx FIFO Empty interrupt if necessary.
++	 */
++	if (hc->ep_is_in) {
++		/*
++		 * IN transfers in Slave mode require an explicit disable to
++		 * halt the channel. (In DMA mode, this call simply releases
++		 * the channel.)
++		 */
++		halt_channel(hcd, hc, qtd, halt_status);
++	} else {
++		/*
++		 * The channel is automatically disabled by the core for OUT
++		 * transfers in Slave mode.
++		 */
++		release_channel(hcd, hc, qtd, halt_status);
++	}
++}
++
++/**
++ * Performs common cleanup for periodic transfers after a Transfer Complete
++ * interrupt. This function should be called after any endpoint type specific
++ * handling is finished to release the host channel.
++ */
++static void complete_periodic_xfer(dwc_otg_hcd_t *hcd,
++				   dwc_hc_t *hc,
++				   dwc_otg_hc_regs_t *hc_regs,
++				   dwc_otg_qtd_t *qtd,
++				   dwc_otg_halt_status_e halt_status)
++{
++	hctsiz_data_t hctsiz;
++	qtd->error_count = 0;
++
++	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++	if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
++		/* Core halts channel in these cases. */
++		release_channel(hcd, hc, qtd, halt_status);
++	} else {
++		/* Flush any outstanding requests from the Tx queue. */
++		halt_channel(hcd, hc, qtd, halt_status);
++	}
++}
++
++/**
++ * Handles a host channel Transfer Complete interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *hcd,
++				       dwc_hc_t *hc,
++				       dwc_otg_hc_regs_t *hc_regs,
++				       dwc_otg_qtd_t *qtd)
++{
++	int			urb_xfer_done;
++	dwc_otg_halt_status_e	halt_status = DWC_OTG_HC_XFER_COMPLETE;
++	struct urb		*urb = qtd->urb;
++	int			pipe_type = usb_pipetype(urb->pipe);
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Transfer Complete--\n", hc->hc_num);
++
++	/*
++	 * Handle xfer complete on CSPLIT.
++	 */
++	if (hc->qh->do_split) {
++		qtd->complete_split = 0;
++	}
++
++	/* Update the QTD and URB states. */
++	switch (pipe_type) {
++	case PIPE_CONTROL:
++		switch (qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			if (urb->transfer_buffer_length > 0) {
++				qtd->control_phase = DWC_OTG_CONTROL_DATA;
++			} else {
++				qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++			}
++			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction done\n");
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		case DWC_OTG_CONTROL_DATA: {
++			urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++			if (urb_xfer_done) {
++				qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++				DWC_DEBUGPL(DBG_HCDV, "  Control data transfer done\n");
++			} else {
++				save_data_toggle(hc, hc_regs, qtd);
++			}
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		}
++		case DWC_OTG_CONTROL_STATUS:
++			DWC_DEBUGPL(DBG_HCDV, "  Control transfer complete\n");
++			if (urb->status == -EINPROGRESS) {
++				urb->status = 0;
++			}
++			dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++			break;
++		}
++
++		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case PIPE_BULK:
++		DWC_DEBUGPL(DBG_HCDV, "  Bulk transfer complete\n");
++		urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++		if (urb_xfer_done) {
++			dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++		} else {
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++		}
++
++		save_data_toggle(hc, hc_regs, qtd);
++		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case PIPE_INTERRUPT:
++		DWC_DEBUGPL(DBG_HCDV, "  Interrupt transfer complete\n");
++		update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++
++		/*
++		 * Interrupt URB is done on the first transfer complete
++		 * interrupt.
++		 */
++		dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
++		save_data_toggle(hc, hc_regs, qtd);
++		complete_periodic_xfer(hcd, hc, hc_regs, qtd,
++				       DWC_OTG_HC_XFER_URB_COMPLETE);
++		break;
++	case PIPE_ISOCHRONOUS:
++		DWC_DEBUGPL(DBG_HCDV,  "  Isochronous transfer complete\n");
++		if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++			halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++							    DWC_OTG_HC_XFER_COMPLETE);
++		}
++		complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	}
++
++	disable_hc_int(hc_regs, xfercompl);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel STALL interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *hcd,
++				    dwc_hc_t *hc,
++				    dwc_otg_hc_regs_t *hc_regs,
++				    dwc_otg_qtd_t *qtd)
++{
++	struct urb *urb = qtd->urb;
++	int pipe_type = usb_pipetype(urb->pipe);
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "STALL Received--\n", hc->hc_num);
++
++	if (pipe_type == PIPE_CONTROL) {
++		dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
++	}
++
++	if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
++		dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
++		/*
++		 * USB protocol requires resetting the data toggle for bulk
++		 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
++		 * setup command is issued to the endpoint. Anticipate the
++		 * CLEAR_FEATURE command since a STALL has occurred and reset
++		 * the data toggle now.
++		 */
++		hc->qh->data_toggle = 0;
++	}
++
++	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
++
++	disable_hc_int(hc_regs, stall);
++
++	return 1;
++}
++
++/*
++ * Updates the state of the URB when a transfer has been stopped due to an
++ * abnormal condition before the transfer completes. Modifies the
++ * actual_length field of the URB to reflect the number of bytes that have
++ * actually been transferred via the host channel.
++ */
++static void update_urb_state_xfer_intr(dwc_hc_t *hc,
++				       dwc_otg_hc_regs_t *hc_regs,
++				       struct urb *urb,
++				       dwc_otg_qtd_t *qtd,
++				       dwc_otg_halt_status_e halt_status)
++{
++	uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
++							    halt_status, NULL);
++	urb->actual_length += bytes_transferred;
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t	hctsiz;
++		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->start_pkt_count %d\n", hc->start_pkt_count);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->max_packet %d\n", hc->max_packet);
++		DWC_DEBUGPL(DBG_HCDV, "  bytes_transferred %d\n", bytes_transferred);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n", urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    urb->transfer_buffer_length);
++	}
++#endif
++}
++
++/**
++ * Handles a host channel NAK interrupt. This handler may be called in either
++ * DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *hcd,
++				  dwc_hc_t *hc,
++				  dwc_otg_hc_regs_t *hc_regs,
++				  dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "NAK Received--\n", hc->hc_num);
++
++	/*
++	 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
++	 * interrupt.  Re-start the SSPLIT transfer.
++	 */
++	if (hc->do_split) {
++		if (hc->complete_split) {
++			qtd->error_count = 0;
++		}
++		qtd->complete_split = 0;
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		goto handle_nak_done;
++	}
++
++	switch (usb_pipetype(qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		if (hcd->core_if->dma_enable && hc->ep_is_in) {
++			/*
++			 * NAK interrupts are enabled on bulk/control IN
++			 * transfers in DMA mode for the sole purpose of
++			 * resetting the error count after a transaction error
++			 * occurs. The core will continue transferring data.
++			 */
++			qtd->error_count = 0;
++			goto handle_nak_done;
++		}
++
++		/*
++		 * NAK interrupts normally occur during OUT transfers in DMA
++		 * or Slave mode. For IN transfers, more requests will be
++		 * queued as request queue space is available.
++		 */
++		qtd->error_count = 0;
++
++		if (!hc->qh->ping_state) {
++			update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
++						   qtd, DWC_OTG_HC_XFER_NAK);
++			save_data_toggle(hc, hc_regs, qtd);
++			if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
++				hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will
++		 * start/continue.
++		 */
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		break;
++	case PIPE_INTERRUPT:
++		qtd->error_count = 0;
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		break;
++	case PIPE_ISOCHRONOUS:
++		/* Should never get called for isochronous transfers. */
++		BUG();
++		break;
++	}
++
++ handle_nak_done:
++	disable_hc_int(hc_regs, nak);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * performing the PING protocol in Slave mode, when errors occur during
++ * either Slave mode or DMA mode, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *hcd,
++				  dwc_hc_t *hc,
++				  dwc_otg_hc_regs_t *hc_regs,
++				  dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "ACK Received--\n", hc->hc_num);
++
++	if (hc->do_split) {
++		/*
++		 * Handle ACK on SSPLIT.
++		 * ACK should not occur in CSPLIT.
++		 */
++		if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
++			qtd->ssplit_out_xfer_count = hc->xfer_len;
++		}
++		if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
++			/* Don't need complete for isochronous out transfers. */
++			qtd->complete_split = 1;
++		}
++
++		/* ISOC OUT */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++			switch (hc->xact_pos) {
++			case DWC_HCSPLIT_XACTPOS_ALL:
++				break;
++			case DWC_HCSPLIT_XACTPOS_END:
++				qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				qtd->isoc_split_offset = 0;
++				break;
++			case DWC_HCSPLIT_XACTPOS_BEGIN:
++			case DWC_HCSPLIT_XACTPOS_MID:
++				/*
++				 * For BEGIN or MID, calculate the length for
++				 * the next microframe to determine the correct
++				 * SSPLIT token, either MID or END.
++				 */
++				{
++					struct usb_iso_packet_descriptor *frame_desc;
++
++					frame_desc = &qtd->urb->iso_frame_desc[qtd->isoc_frame_index];
++					qtd->isoc_split_offset += 188;
++
++					if ((frame_desc->length - qtd->isoc_split_offset) <= 188) {
++						qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
++					} else {
++						qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
++					}
++
++				}
++				break;
++			}
++		} else {
++			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++		}
++	} else {
++		qtd->error_count = 0;
++
++		if (hc->qh->ping_state) {
++			hc->qh->ping_state = 0;
++			/*
++			 * Halt the channel so the transfer can be re-started
++			 * from the appropriate point. This only happens in
++			 * Slave mode. In DMA mode, the ping_state is cleared
++			 * when the transfer is started because the core
++			 * automatically executes the PING, then the transfer.
++			 */
++			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++		}
++	}
++
++	/*
++	 * If the ACK occurred when _not_ in the PING state, let the channel
++	 * continue transferring data after clearing the error count.
++	 */
++
++	disable_hc_int(hc_regs, ack);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel NYET interrupt. This interrupt should only occur on
++ * Bulk and Control OUT endpoints and for complete split transactions. If a
++ * NYET occurs at the same time as a Transfer Complete interrupt, it is
++ * handled in the xfercomp interrupt handler, not here. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *hcd,
++				   dwc_hc_t *hc,
++				   dwc_otg_hc_regs_t *hc_regs,
++				   dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "NYET Received--\n", hc->hc_num);
++
++	/*
++	 * NYET on CSPLIT
++	 * re-do the CSPLIT immediately on non-periodic
++	 */
++	if (hc->do_split && hc->complete_split) {
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
++
++			if (dwc_full_frame_num(frnum) !=
++			    dwc_full_frame_num(hc->qh->sched_frame)) {
++				/*
++				 * No longer in the same full speed frame.
++				 * Treat this as a transaction error.
++				 */
++#if 0
++				/** @todo Fix system performance so this can
++				 * be treated as an error. Right now complete
++				 * splits cannot be scheduled precisely enough
++				 * due to other system activity, so this error
++				 * occurs regularly in Slave mode.
++				 */
++				qtd->error_count++;
++#endif
++				qtd->complete_split = 0;
++				halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++				/** @todo add support for isoc release */
++				goto handle_nyet_done;
++			}
++		}
++
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++		goto handle_nyet_done;
++	}
++
++	hc->qh->ping_state = 1;
++	qtd->error_count = 0;
++
++	update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
++				   DWC_OTG_HC_XFER_NYET);
++	save_data_toggle(hc, hc_regs, qtd);
++
++	/*
++	 * Halt the channel and re-start the transfer so the PING
++	 * protocol will start.
++	 */
++	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++
++handle_nyet_done:
++	disable_hc_int(hc_regs, nyet);
++	return 1;
++}
++
++/**
++ * Handles a host channel babble interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *hcd,
++				     dwc_hc_t *hc,
++				     dwc_otg_hc_regs_t *hc_regs,
++				     dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Babble Error--\n", hc->hc_num);
++	if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++		dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EOVERFLOW);
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
++	} else {
++		dwc_otg_halt_status_e halt_status;
++		halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						    DWC_OTG_HC_XFER_BABBLE_ERR);
++		halt_channel(hcd, hc, qtd, halt_status);
++	}
++	disable_hc_int(hc_regs, bblerr);
++	return 1;
++}
++
++/**
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *hcd,
++				     dwc_hc_t *hc,
++				     dwc_otg_hc_regs_t *hc_regs,
++				     dwc_otg_qtd_t *qtd)
++{
++	hcchar_data_t	hcchar;
++	hcsplt_data_t	hcsplt;
++	hctsiz_data_t	hctsiz;
++	uint32_t	hcdma;
++	struct urb	*urb = qtd->urb;
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "AHB Error--\n", hc->hc_num);
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++	hcdma = dwc_read_reg32(&hc_regs->hcdma);
++
++	DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
++	DWC_ERROR("  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++	DWC_ERROR("  hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++		  DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
++	DWC_ERROR("  Device address: %d\n", usb_pipedevice(urb->pipe));
++	DWC_ERROR("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++		  (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++	DWC_ERROR("  Endpoint type: %s\n",
++		  ({char *pipetype;
++		    switch (usb_pipetype(urb->pipe)) {
++		    case PIPE_CONTROL: pipetype = "CONTROL"; break;
++		    case PIPE_BULK: pipetype = "BULK"; break;
++		    case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++		    case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++		    default: pipetype = "UNKNOWN"; break;
++		   }; pipetype;}));
++	DWC_ERROR("  Speed: %s\n",
++		  ({char *speed;
++		    switch (urb->dev->speed) {
++		    case USB_SPEED_HIGH: speed = "HIGH"; break;
++		    case USB_SPEED_FULL: speed = "FULL"; break;
++		    case USB_SPEED_LOW: speed = "LOW"; break;
++		    default: speed = "UNKNOWN"; break;
++		   }; speed;}));
++	DWC_ERROR("  Max packet size: %d\n",
++		  usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++	DWC_ERROR("  Data buffer length: %d\n", urb->transfer_buffer_length);
++	DWC_ERROR("  Transfer buffer: %p, Transfer DMA: %p\n",
++		  urb->transfer_buffer, (void *)urb->transfer_dma);
++	DWC_ERROR("  Setup buffer: %p, Setup DMA: %p\n",
++		  urb->setup_packet, (void *)urb->setup_dma);
++	DWC_ERROR("  Interval: %d\n", urb->interval);
++
++	dwc_otg_hcd_complete_urb(hcd, urb, -EIO);
++
++	/*
++	 * Force a channel halt. Don't call halt_channel because that won't
++	 * write to the HCCHARn register in DMA mode to force the halt.
++	 */
++	dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR);
++
++	disable_hc_int(hc_regs, ahberr);
++	return 1;
++}
++
++/**
++ * Handles a host channel transaction error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *hcd,
++				      dwc_hc_t *hc,
++				      dwc_otg_hc_regs_t *hc_regs,
++				      dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Transaction Error--\n", hc->hc_num);
++
++	switch (usb_pipetype(qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		qtd->error_count++;
++		if (!hc->qh->ping_state) {
++			update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
++						   qtd, DWC_OTG_HC_XFER_XACT_ERR);
++			save_data_toggle(hc, hc_regs, qtd);
++			if (!hc->ep_is_in && qtd->urb->dev->speed == USB_SPEED_HIGH) {
++				hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will start.
++		 */
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		break;
++	case PIPE_INTERRUPT:
++		qtd->error_count++;
++		if (hc->do_split && hc->complete_split) {
++			qtd->complete_split = 0;
++		}
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		break;
++	case PIPE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++							    DWC_OTG_HC_XFER_XACT_ERR);
++
++			halt_channel(hcd, hc, qtd, halt_status);
++		}
++		break;
++	}
++
++	disable_hc_int(hc_regs, xacterr);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel frame overrun interrupt. This handler may be called
++ * in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *hcd,
++				       dwc_hc_t *hc,
++				       dwc_otg_hc_regs_t *hc_regs,
++				       dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Frame Overrun--\n", hc->hc_num);
++
++	switch (usb_pipetype(qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		break;
++	case PIPE_INTERRUPT:
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
++		break;
++	case PIPE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++							    DWC_OTG_HC_XFER_FRAME_OVERRUN);
++
++			halt_channel(hcd, hc, qtd, halt_status);
++		}
++		break;
++	}
++
++	disable_hc_int(hc_regs, frmovrun);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel data toggle error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *hcd,
++					 dwc_hc_t *hc,
++					 dwc_otg_hc_regs_t *hc_regs,
++					 dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Data Toggle Error--\n", hc->hc_num);
++
++	if (hc->ep_is_in) {
++		qtd->error_count = 0;
++	} else {
++		DWC_ERROR("Data Toggle Error on OUT transfer,"
++			  "channel %d\n", hc->hc_num);
++	}
++
++	disable_hc_int(hc_regs, datatglerr);
++
++	return 1;
++}
++
++#ifdef DEBUG
++/**
++ * This function is for debug only. It checks that a valid halt status is set
++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
++ * taken and a warning is issued.
++ * @return 1 if halt status is ok, 0 otherwise.
++ */
++static inline int halt_status_ok(dwc_otg_hcd_t *hcd,
++				 dwc_hc_t *hc,
++				 dwc_otg_hc_regs_t *hc_regs,
++				 dwc_otg_qtd_t *qtd)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	hcsplt_data_t hcsplt;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
++		/*
++		 * This code is here only as a check. This condition should
++		 * never happen. Ignore the halt if it does occur.
++		 */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++		hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++		DWC_WARN("%s: hc->halt_status == DWC_OTG"
++			 "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
++			 "hcint 0x%08x, hcintmsk 0x%08x, "
++			 "hcsplt 0x%08x, qtd->complete_split %d\n",
++			 __func__, hc->hc_num, hcchar.d32, hctsiz.d32,
++			 hcint.d32, hcintmsk.d32,
++			 hcsplt.d32, qtd->complete_split);
++
++		DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
++			 __func__, hc->hc_num);
++		DWC_WARN("\n");
++		clear_hc_int(hc_regs, chhltd);
++		return 0;
++	}
++
++	/*
++	 * This code is here only as a check. hcchar.chdis should
++	 * never be set when the halt interrupt occurs. Halt the
++	 * channel again if it does occur.
++	 */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: hcchar.chdis set unexpectedly, "
++			 "hcchar 0x%08x, trying to halt again\n",
++			 __func__, hcchar.d32);
++		clear_hc_int(hc_regs, chhltd);
++		hc->halt_pending = 0;
++		halt_channel(hcd, hc, qtd, hc->halt_status);
++		return 0;
++	}
++
++	return 1;
++}
++#endif
++
++/**
++ * Handles a host Channel Halted interrupt in DMA mode. This handler
++ * determines the reason the channel halted and proceeds accordingly.
++ */
++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *hcd,
++				      dwc_hc_t *hc,
++				      dwc_otg_hc_regs_t *hc_regs,
++				      dwc_otg_qtd_t *qtd)
++{
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	int out_nak_enh = 0;
++
++	/* For core with OUT NAK enhancement, the flow for high-
++	 * speed CONTROL/BULK OUT is handled a little differently.
++	 */
++	if (hcd->core_if->snpsid >= 0x4F54271A) {
++		if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
++		    (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		     hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
++			printk(KERN_DEBUG "OUT NAK enhancement enabled\n");
++			out_nak_enh = 1;
++		} else {
++			printk(KERN_DEBUG "OUT NAK enhancement disabled, not HS Ctrl/Bulk OUT EP\n");
++		}
++	} else {
++//		printk(KERN_DEBUG "OUT NAK enhancement disabled, no core support\n");
++	}
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Just release the channel. A dequeue can happen on a
++		 * transfer timeout. In the case of an AHB Error, the channel
++		 * was forced to halt because there's no way to gracefully
++		 * recover.
++		 */
++		release_channel(hcd, hc, qtd, hc->halt_status);
++		return;
++	}
++
++	/* Read the HCINTn register to determine the cause for the halt. */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++
++	if (hcint.b.xfercomp) {
++		/** @todo This is here because of a possible hardware bug.  Spec
++		 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
++		 * interrupt w/ACK bit set should occur, but I only see the
++		 * XFERCOMP bit, even with it masked out.  This is a workaround
++		 * for that behavior.  Should fix this when hardware is fixed.
++		 */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++		}
++		handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.stall) {
++		handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.xacterr) {
++		if (out_nak_enh) {
++			if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
++				printk(KERN_DEBUG "XactErr with NYET/NAK/ACK\n");
++				qtd->error_count = 0;
++			} else {
++				printk(KERN_DEBUG "XactErr without NYET/NAK/ACK\n");
++			}
++		}
++
++		/*
++		 * Must handle xacterr before nak or ack. Could get a xacterr
++		 * at the same time as either of these on a BULK/CONTROL OUT
++		 * that started with a PING. The xacterr takes precedence.
++		 */
++		handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
++	} else if (!out_nak_enh) {
++		if (hcint.b.nyet) {
++			/*
++			 * Must handle nyet before nak or ack. Could get a nyet at the
++			 * same time as either of those on a BULK/CONTROL OUT that
++			 * started with a PING. The nyet takes precedence.
++			 */
++			handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.bblerr) {
++			handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.frmovrun) {
++			handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.nak && !hcintmsk.b.nak) {
++			/*
++			 * If nak is not masked, it's because a non-split IN transfer
++			 * is in an error state. In that case, the nak is handled by
++			 * the nak interrupt handler, not here. Handle nak here for
++			 * BULK/CONTROL OUT transfers, which halt on a NAK to allow
++			 * rewinding the buffer pointer.
++			 */
++			handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.ack && !hcintmsk.b.ack) {
++			/*
++			 * If ack is not masked, it's because a non-split IN transfer
++			 * is in an error state. In that case, the ack is handled by
++			 * the ack interrupt handler, not here. Handle ack here for
++			 * split transfers. Start splits halt on ACK.
++			 */
++			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++		} else {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				/*
++				 * A periodic transfer halted with no other channel
++				 * interrupts set. Assume it was halted by the core
++				 * because it could not be completed in its scheduled
++				 * (micro)frame.
++				 */
++#ifdef DEBUG
++				DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
++					  __func__, hc->hc_num);
++#endif
++				halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
++			} else {
++				DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
++					  "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
++					  __func__, hc->hc_num, hcint.d32,
++					  dwc_read_reg32(&hcd->core_if->core_global_regs->gintsts));
++			}
++		}
++	} else {
++		printk(KERN_DEBUG "NYET/NAK/ACK/other in non-error case, 0x%08x\n", hcint.d32);
++	}
++}
++
++/**
++ * Handles a host channel Channel Halted interrupt.
++ *
++ * In slave mode, this handler is called only when the driver specifically
++ * requests a halt. This occurs during handling other host channel interrupts
++ * (e.g. nak, xacterr, stall, nyet, etc.).
++ *
++ * In DMA mode, this is the interrupt that occurs when the core has finished
++ * processing a transfer on a channel. Other host channel interrupts (except
++ * ahberr) are disabled in DMA mode.
++ */
++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *hcd,
++				     dwc_hc_t *hc,
++				     dwc_otg_hc_regs_t *hc_regs,
++				     dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Channel Halted--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_enable) {
++		handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
++	} else {
++#ifdef DEBUG
++		if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
++			return 1;
++		}
++#endif
++		release_channel(hcd, hc, qtd, hc->halt_status);
++	}
++
++	return 1;
++}
++
++/** Handles interrupt for a specific Host Channel */
++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num)
++{
++	int retval = 0;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	dwc_hc_t *hc;
++	dwc_otg_hc_regs_t *hc_regs;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
++
++	hc = dwc_otg_hcd->hc_ptr_array[num];
++	hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
++	qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++	DWC_DEBUGPL(DBG_HCDV, "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
++		    hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
++	hcint.d32 = hcint.d32 & hcintmsk.d32;
++
++	if (!dwc_otg_hcd->core_if->dma_enable) {
++		if (hcint.b.chhltd && hcint.d32 != 0x2) {
++			hcint.b.chhltd = 0;
++		}
++	}
++
++	if (hcint.b.xfercomp) {
++		retval |= handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++		/*
++		 * If NYET occurred at same time as Xfer Complete, the NYET is
++		 * handled by the Xfer Complete interrupt handler. Don't want
++		 * to call the NYET interrupt handler in this case.
++		 */
++		hcint.b.nyet = 0;
++	}
++	if (hcint.b.chhltd) {
++		retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.ahberr) {
++		retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.stall) {
++		retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.nak) {
++		retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.ack) {
++		retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.nyet) {
++		retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.xacterr) {
++		retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.bblerr) {
++		retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.frmovrun) {
++		retval |= handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.datatglerr) {
++		retval |= handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+@@ -0,0 +1,684 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $
++ * $Revision: 1.5 $
++ * $Date: 2008-12-15 06:51:32 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the functions to manage Queue Heads and Queue
++ * Transfer Descriptors.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++/**
++ * This function allocates and initializes a QH.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] urb Holds the information about the device/endpoint that we need
++ * to initialize the QH.
++ *
++ * @return Returns pointer to the newly allocated QH, or NULL on error. */
++dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *hcd, struct urb *urb)
++{
++	dwc_otg_qh_t *qh;
++
++	/* Allocate memory */
++	/** @todo add memflags argument */
++	qh = dwc_otg_hcd_qh_alloc ();
++	if (qh == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qh_init (hcd, qh, urb);
++	return qh;
++}
++
++/** Free each QTD in the QH's QTD-list then free the QH.  QH should already be
++ * removed from a list.  QTD list should already be empty if called from URB
++ * Dequeue.
++ *
++ * @param[in] hcd HCD instance.
++ * @param[in] qh The QH to free.
++ */
++void dwc_otg_hcd_qh_free (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	dwc_otg_qtd_t *qtd;
++	struct list_head *pos;
++	unsigned long flags;
++
++	/* Free each QTD in the QTD list */
++	SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
++	for (pos = qh->qtd_list.next;
++	     pos != &qh->qtd_list;
++	     pos = qh->qtd_list.next)
++	{
++		list_del (pos);
++		qtd = dwc_list_to_qtd (pos);
++		dwc_otg_hcd_qtd_free (qtd);
++	}
++	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
++
++	if (qh->dw_align_buf) {
++		dma_free_coherent((dwc_otg_hcd_to_hcd(hcd))->self.controller,
++				  hcd->core_if->core_params->max_transfer_size,
++				  qh->dw_align_buf,
++				  qh->dw_align_buf_dma);
++	}
++
++	kfree (qh);
++	return;
++}
++
++/** Initializes a QH structure.
++ *
++ * @param[in] hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] qh The QH to init.
++ * @param[in] urb Holds the information about the device/endpoint that we need
++ * to initialize the QH. */
++#define SCHEDULE_SLOP 10
++void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb)
++{
++	char *speed, *type;
++	memset (qh, 0, sizeof (dwc_otg_qh_t));
++
++	/* Initialize QH */
++	switch (usb_pipetype(urb->pipe)) {
++	case PIPE_CONTROL:
++		qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
++		break;
++	case PIPE_BULK:
++		qh->ep_type = USB_ENDPOINT_XFER_BULK;
++		break;
++	case PIPE_ISOCHRONOUS:
++		qh->ep_type = USB_ENDPOINT_XFER_ISOC;
++		break;
++	case PIPE_INTERRUPT:
++		qh->ep_type = USB_ENDPOINT_XFER_INT;
++		break;
++	}
++
++	qh->ep_is_in = usb_pipein(urb->pipe) ? 1 : 0;
++
++	qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++	qh->maxp = usb_maxpacket(urb->dev, urb->pipe, !(usb_pipein(urb->pipe)));
++	INIT_LIST_HEAD(&qh->qtd_list);
++	INIT_LIST_HEAD(&qh->qh_list_entry);
++	qh->channel = NULL;
++
++	/* FS/LS Enpoint on HS Hub
++	 * NOT virtual root hub */
++	qh->do_split = 0;
++	if (((urb->dev->speed == USB_SPEED_LOW) ||
++	     (urb->dev->speed == USB_SPEED_FULL)) &&
++	     (urb->dev->tt) && (urb->dev->tt->hub) && (urb->dev->tt->hub->devnum != 1))
++	{
++		DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
++			   usb_pipeendpoint(urb->pipe), urb->dev->tt->hub->devnum,
++			   urb->dev->ttport);
++		qh->do_split = 1;
++	}
++
++	if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
++	    qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
++		/* Compute scheduling parameters once and save them. */
++		hprt0_data_t hprt;
++
++		/** @todo Account for split transfers in the bus time. */
++		int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
++
++		/* FIXME: work-around patch by Steven */
++		qh->usecs = NS_TO_US(usb_calc_bus_time(urb->dev->speed,
++					       usb_pipein(urb->pipe),
++					       (qh->ep_type == USB_ENDPOINT_XFER_ISOC),
++					       bytecount));
++
++		/* Start in a slightly future (micro)frame. */
++		qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
++						     SCHEDULE_SLOP);
++		qh->interval = urb->interval;
++#if 0
++		/* Increase interrupt polling rate for debugging. */
++		if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++			qh->interval = 8;
++		}
++#endif
++		hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0);
++		if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
++		    ((urb->dev->speed == USB_SPEED_LOW) ||
++		     (urb->dev->speed == USB_SPEED_FULL))) {
++			qh->interval *= 8;
++			qh->sched_frame |= 0x7;
++			qh->start_split_frame = qh->sched_frame;
++		}
++
++	}
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - qh = %p\n", qh);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Device Address = %d\n",
++		    urb->dev->devnum);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Endpoint %d, %s\n",
++		    usb_pipeendpoint(urb->pipe),
++		    usb_pipein(urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
++
++	switch(urb->dev->speed) {
++	case USB_SPEED_LOW:
++		speed = "low";
++		break;
++	case USB_SPEED_FULL:
++		speed = "full";
++		break;
++	case USB_SPEED_HIGH:
++		speed = "high";
++		break;
++	default:
++		speed = "?";
++		break;
++	}
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Speed = %s\n", speed);
++
++	switch (qh->ep_type) {
++	case USB_ENDPOINT_XFER_ISOC:
++		type = "isochronous";
++		break;
++	case USB_ENDPOINT_XFER_INT:
++		type = "interrupt";
++		break;
++	case USB_ENDPOINT_XFER_CONTROL:
++		type = "control";
++		break;
++	case USB_ENDPOINT_XFER_BULK:
++		type = "bulk";
++		break;
++	default:
++		type = "?";
++		break;
++	}
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Type = %s\n",type);
++
++#ifdef DEBUG
++	if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
++			    qh->usecs);
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
++			    qh->interval);
++	}
++#endif
++	qh->dw_align_buf = NULL;
++	return;
++}
++
++/**
++ * Checks that a channel is available for a periodic transfer.
++ *
++ * @return 0 if successful, negative error code otherise.
++ */
++static int periodic_channel_available(dwc_otg_hcd_t *hcd)
++{
++	/*
++	 * Currently assuming that there is a dedicated host channnel for each
++	 * periodic transaction plus at least one host channel for
++	 * non-periodic transactions.
++	 */
++	int status;
++	int num_channels;
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) &&
++	    (hcd->periodic_channels < num_channels - 1)) {
++		status = 0;
++	}
++	else {
++		DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
++			   __func__, num_channels, hcd->periodic_channels,
++			   hcd->non_periodic_channels);
++		status = -ENOSPC;
++	}
++
++	return status;
++}
++
++/**
++ * Checks that there is sufficient bandwidth for the specified QH in the
++ * periodic schedule. For simplicity, this calculation assumes that all the
++ * transfers in the periodic schedule may occur in the same (micro)frame.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH containing periodic bandwidth required.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_periodic_bandwidth(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	int 		status;
++	uint16_t 	max_claimed_usecs;
++
++	status = 0;
++
++	if (hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) {
++		/*
++		 * High speed mode.
++		 * Max periodic usecs is 80% x 125 usec = 100 usec.
++		 */
++		max_claimed_usecs = 100 - qh->usecs;
++	} else {
++		/*
++		 * Full speed mode.
++		 * Max periodic usecs is 90% x 1000 usec = 900 usec.
++		 */
++		max_claimed_usecs = 900 - qh->usecs;
++	}
++
++	if (hcd->periodic_usecs > max_claimed_usecs) {
++		DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n",
++			   __func__, hcd->periodic_usecs, qh->usecs);
++		status = -ENOSPC;
++	}
++
++	return status;
++}
++
++/**
++ * Checks that the max transfer size allowed in a host channel is large enough
++ * to handle the maximum data transfer in a single (micro)frame for a periodic
++ * transfer.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for a periodic endpoint.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_max_xfer_size(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	int		status;
++	uint32_t 	max_xfer_size;
++	uint32_t	max_channel_xfer_size;
++
++	status = 0;
++
++	max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
++	max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
++
++	if (max_xfer_size > max_channel_xfer_size) {
++		DWC_NOTICE("%s: Periodic xfer length %d > "
++			    "max xfer length for channel %d\n",
++			    __func__, max_xfer_size, max_channel_xfer_size);
++		status = -ENOSPC;
++	}
++
++	return status;
++}
++
++/**
++ * Schedules an interrupt or isochronous transfer in the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer. The QH should already contain the
++ * scheduling information.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int schedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	int status = 0;
++
++	status = periodic_channel_available(hcd);
++	if (status) {
++		DWC_NOTICE("%s: No host channel available for periodic "
++			   "transfer.\n", __func__);
++		return status;
++	}
++
++	status = check_periodic_bandwidth(hcd, qh);
++	if (status) {
++		DWC_NOTICE("%s: Insufficient periodic bandwidth for "
++			   "periodic transfer.\n", __func__);
++		return status;
++	}
++
++	status = check_max_xfer_size(hcd, qh);
++	if (status) {
++		DWC_NOTICE("%s: Channel max transfer size too small "
++			    "for periodic transfer.\n", __func__);
++		return status;
++	}
++
++	/* Always start in the inactive schedule. */
++	list_add_tail(&qh->qh_list_entry, &hcd->periodic_sched_inactive);
++
++	/* Reserve the periodic channel. */
++	hcd->periodic_channels++;
++
++	/* Update claimed usecs per (micro)frame. */
++	hcd->periodic_usecs += qh->usecs;
++
++	/* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++	hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated += qh->usecs / qh->interval;
++	if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs++;
++		DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
++			    qh, qh->usecs, qh->interval);
++	} else {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs++;
++		DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
++			    qh, qh->usecs, qh->interval);
++	}
++
++	return status;
++}
++
++/**
++ * This function adds a QH to either the non periodic or periodic schedule if
++ * it is not already in the schedule. If the QH is already in the schedule, no
++ * action is taken.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	unsigned long flags;
++	int status = 0;
++
++	SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
++
++	if (!list_empty(&qh->qh_list_entry)) {
++		/* QH already in a schedule. */
++		goto done;
++	}
++
++	/* Add the new QH to the appropriate schedule */
++	if (dwc_qh_is_non_per(qh)) {
++		/* Always start in the inactive schedule. */
++		list_add_tail(&qh->qh_list_entry, &hcd->non_periodic_sched_inactive);
++	} else {
++		status = schedule_periodic(hcd, qh);
++	}
++
++ done:
++	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
++
++	return status;
++}
++
++/**
++ * Removes an interrupt or isochronous transfer from the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer.
++ */
++static void deschedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	list_del_init(&qh->qh_list_entry);
++
++	/* Release the periodic channel reservation. */
++	hcd->periodic_channels--;
++
++	/* Update claimed usecs per (micro)frame. */
++	hcd->periodic_usecs -= qh->usecs;
++
++	/* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++	hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated -= qh->usecs / qh->interval;
++
++	if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs--;
++		DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
++			    qh, qh->usecs, qh->interval);
++	} else {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs--;
++		DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
++			    qh, qh->usecs, qh->interval);
++	}
++}
++
++/**
++ * Removes a QH from either the non-periodic or periodic schedule.  Memory is
++ * not freed.
++ *
++ * @param[in] hcd The HCD state structure.
++ * @param[in] qh QH to remove from schedule. */
++void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	unsigned long flags;
++
++	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
++
++	if (list_empty(&qh->qh_list_entry)) {
++		/* QH is not in a schedule. */
++		goto done;
++	}
++
++	if (dwc_qh_is_non_per(qh)) {
++		if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
++			hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++		}
++		list_del_init(&qh->qh_list_entry);
++	} else {
++		deschedule_periodic(hcd, qh);
++	}
++
++ done:
++	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
++}
++
++/**
++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the inactive non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ *
++ * For periodic QHs, the QH is removed from the periodic queued schedule. If
++ * there are any QTDs still attached to the QH, the QH is added to either the
++ * periodic inactive schedule or the periodic ready schedule and its next
++ * scheduled frame is calculated. The QH is placed in the ready schedule if
++ * the scheduled frame has been reached already. Otherwise it's placed in the
++ * inactive schedule. If there are no QTDs attached to the QH, the QH is
++ * completely removed from the periodic schedule.
++ */
++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_next_periodic_split)
++{
++	unsigned long flags;
++	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
++
++	if (dwc_qh_is_non_per(qh)) {
++		dwc_otg_hcd_qh_remove(hcd, qh);
++		if (!list_empty(&qh->qtd_list)) {
++			/* Add back to inactive non-periodic schedule. */
++			dwc_otg_hcd_qh_add(hcd, qh);
++		}
++	} else {
++		uint16_t frame_number =	dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
++
++		if (qh->do_split) {
++			/* Schedule the next continuing periodic split transfer */
++			if (sched_next_periodic_split) {
++
++				qh->sched_frame = frame_number;
++				if (dwc_frame_num_le(frame_number,
++						     dwc_frame_num_inc(qh->start_split_frame, 1))) {
++					/*
++					 * Allow one frame to elapse after start
++					 * split microframe before scheduling
++					 * complete split, but DONT if we are
++					 * doing the next start split in the
++					 * same frame for an ISOC out.
++					 */
++					if ((qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (qh->ep_is_in != 0)) {
++						qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, 1);
++					}
++				}
++			} else {
++				qh->sched_frame = dwc_frame_num_inc(qh->start_split_frame,
++								     qh->interval);
++				if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++					qh->sched_frame = frame_number;
++				}
++				qh->sched_frame |= 0x7;
++				qh->start_split_frame = qh->sched_frame;
++			}
++		} else {
++			qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval);
++			if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++				qh->sched_frame = frame_number;
++			}
++		}
++
++		if (list_empty(&qh->qtd_list)) {
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		} else {
++			/*
++			 * Remove from periodic_sched_queued and move to
++			 * appropriate queue.
++			 */
++			if (qh->sched_frame == frame_number) {
++				list_move(&qh->qh_list_entry,
++					  &hcd->periodic_sched_ready);
++			} else {
++				list_move(&qh->qh_list_entry,
++					  &hcd->periodic_sched_inactive);
++			}
++		}
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
++}
++
++/**
++ * This function allocates and initializes a QTD.
++ *
++ * @param[in] urb The URB to create a QTD from.  Each URB-QTD pair will end up
++ * pointing to each other so each pair should have a unique correlation.
++ *
++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb)
++{
++	dwc_otg_qtd_t *qtd;
++
++	qtd = dwc_otg_hcd_qtd_alloc ();
++	if (qtd == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qtd_init (qtd, urb);
++	return qtd;
++}
++
++/**
++ * Initializes a QTD structure.
++ *
++ * @param[in] qtd The QTD to initialize.
++ * @param[in] urb The URB to use for initialization.  */
++void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb)
++{
++	memset (qtd, 0, sizeof (dwc_otg_qtd_t));
++	qtd->urb = urb;
++	if (usb_pipecontrol(urb->pipe)) {
++		/*
++		 * The only time the QTD data toggle is used is on the data
++		 * phase of control transfers. This phase always starts with
++		 * DATA1.
++		 */
++		qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		qtd->control_phase = DWC_OTG_CONTROL_SETUP;
++	}
++
++	/* start split */
++	qtd->complete_split = 0;
++	qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++	qtd->isoc_split_offset = 0;
++
++	/* Store the qtd ptr in the urb to reference what QTD. */
++	urb->hcpriv = qtd;
++	return;
++}
++
++/**
++ * This function adds a QTD to the QTD-list of a QH.  It will find the correct
++ * QH to place the QTD into.  If it does not find a QH, then it will create a
++ * new QH. If the QH to which the QTD is added is not currently scheduled, it
++ * is placed into the proper schedule based on its EP type.
++ *
++ * @param[in] qtd The QTD to add
++ * @param[in] dwc_otg_hcd The DWC HCD structure
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd,
++			 dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	struct usb_host_endpoint *ep;
++	dwc_otg_qh_t *qh;
++	unsigned long flags;
++	int retval = 0;
++
++	struct urb *urb = qtd->urb;
++
++	SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
++
++	/*
++	 * Get the QH which holds the QTD-list to insert to. Create QH if it
++	 * doesn't exist.
++	 */
++	ep = dwc_urb_to_endpoint(urb);
++	qh = (dwc_otg_qh_t *)ep->hcpriv;
++	if (qh == NULL) {
++		qh = dwc_otg_hcd_qh_create (dwc_otg_hcd, urb);
++		if (qh == NULL) {
++			goto done;
++		}
++		ep->hcpriv = qh;
++	}
++
++	retval = dwc_otg_hcd_qh_add(dwc_otg_hcd, qh);
++	if (retval == 0) {
++		list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list);
++	}
++
++ done:
++	SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_pcd.c
+@@ -0,0 +1,2523 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
++ * $Revision: 1.5 $
++ * $Date: 2008-11-27 09:21:25 $
++ * $Change: 1115682 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++/** @file
++ * This file implements the Peripheral Controller Driver.
++ *
++ * The Peripheral Controller Driver (PCD) is responsible for
++ * translating requests from the Function Driver into the appropriate
++ * actions on the DWC_otg controller. It isolates the Function Driver
++ * from the specifics of the controller by providing an API to the
++ * Function Driver.
++ *
++ * The Peripheral Controller Driver for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used.
++ * (Gadget Driver is the Linux terminology for a Function Driver.)
++ *
++ * The Linux Gadget API is defined in the header file
++ * <code><linux/usb_gadget.h></code>.  The USB EP operations API is
++ * defined in the structure <code>usb_ep_ops</code> and the USB
++ * Controller API is defined in the structure
++ * <code>usb_gadget_ops</code>.
++ *
++ * An important function of the PCD is managing interrupts generated
++ * by the DWC_otg controller. The implementation of the DWC_otg device
++ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
++ *
++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
++ * @todo Does it work when the request size is greater than DEPTSIZ
++ * transfer size
++ *
++ */
++
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++#include <linux/usb/gadget.h>
++#else
++#include <linux/usb_gadget.h>
++#endif
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_pcd.h"
++
++
++/**
++ * Static PCD pointer for use in usb_gadget_register_driver and
++ * usb_gadget_unregister_driver.  Initialized in dwc_otg_pcd_init.
++ */
++static	 dwc_otg_pcd_t *s_pcd = 0;
++
++
++/* Display the contents of the buffer */
++extern void dump_msg(const u8 *buf, unsigned int length);
++
++
++/**
++ * This function completes a request.  It call's the request call back.
++ */
++void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req,
++				  int status)
++{
++	unsigned stopped = ep->stopped;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep);
++	list_del_init(&req->queue);
++
++	if (req->req.status == -EINPROGRESS) {
++		req->req.status = status;
++	} else {
++		status = req->req.status;
++	}
++
++	/* don't modify queue heads during completion callback */
++	ep->stopped = 1;
++	SPIN_UNLOCK(&ep->pcd->lock);
++	req->req.complete(&ep->ep, &req->req);
++	SPIN_LOCK(&ep->pcd->lock);
++
++	if (ep->pcd->request_pending > 0) {
++		--ep->pcd->request_pending;
++	}
++
++	ep->stopped = stopped;
++}
++
++/**
++ * This function terminates all the requsts in the EP request queue.
++ */
++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_otg_pcd_request_t *req;
++
++	ep->stopped = 1;
++
++	/* called with irqs blocked?? */
++	while (!list_empty(&ep->queue)) {
++		req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
++				 queue);
++		dwc_otg_request_done(ep, req, -ESHUTDOWN);
++	}
++}
++
++/* USB Endpoint Operations */
++/*
++ * The following sections briefly describe the behavior of the Gadget
++ * API endpoint operations implemented in the DWC_otg driver
++ * software. Detailed descriptions of the generic behavior of each of
++ * these functions can be found in the Linux header file
++ * include/linux/usb_gadget.h.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
++ * function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper
++ * functions. Within each section, the corresponding DWC_otg PCD
++ * function name is specified.
++ *
++ */
++
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t	*core_if)
++{
++	uint32_t PerTxMsk = 1;
++	int i;
++	for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i)
++	{
++		if((PerTxMsk & core_if->p_tx_msk) == 0) {
++			core_if->p_tx_msk |= PerTxMsk;
++			return i + 1;
++		}
++		PerTxMsk <<= 1;
++	}
++	return 0;
++}
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
++{
++	core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
++}
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if)
++{
++	uint32_t TxMsk = 1;
++	int i;
++
++	for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i)
++	{
++		if((TxMsk & core_if->tx_msk) == 0) {
++			core_if->tx_msk |= TxMsk;
++			return i + 1;
++		}
++		TxMsk <<= 1;
++	}
++	return 0;
++}
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_tx_fifo(dwc_otg_core_if_t	*core_if, uint32_t fifo_num)
++{
++	core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
++}
++
++/**
++ * This function is called by the Gadget Driver for each EP to be
++ * configured for the current configuration (SET_CONFIGURATION).
++ *
++ * This function initializes the dwc_otg_ep_t data structure, and then
++ * calls dwc_otg_ep_activate.
++ */
++static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep,
++				 const struct usb_endpoint_descriptor *ep_desc)
++{
++	dwc_otg_pcd_ep_t *ep = 0;
++	dwc_otg_pcd_t *pcd = 0;
++	unsigned long flags;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc);
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	if (!usb_ep || !ep_desc || ep->desc ||
++			ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
++		DWC_WARN("%s, bad ep or descriptor\n", __func__);
++		return -EINVAL;
++	}
++	if (ep == &ep->pcd->ep0) {
++		DWC_WARN("%s, bad ep(0)\n", __func__);
++		return -EINVAL;
++	}
++
++	/* Check FIFO size? */
++	if (!ep_desc->wMaxPacketSize) {
++		DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
++		return -ERANGE;
++	}
++
++	pcd = ep->pcd;
++	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++
++	ep->desc = ep_desc;
++	ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize);
++
++	/*
++	 * Activate the EP
++	 */
++	ep->stopped = 0;
++
++	ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0;
++	ep->dwc_ep.maxpacket = ep->ep.maxpacket;
++
++	ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
++
++	if(ep->dwc_ep.is_in) {
++		if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) {
++			ep->dwc_ep.tx_fifo_num = 0;
++
++			if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) {
++				/*
++				 * if ISOC EP then assign a Periodic Tx FIFO.
++				 */
++				ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if);
++			 }
++		} else {
++			/*
++			 * if Dedicated FIFOs mode is on then assign a Tx FIFO.
++			 */
++			ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if);
++
++		}
++	}
++	/* Set initial data PID. */
++	if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) {
++		ep->dwc_ep.data_pid_start = 0;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n",
++					ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"),
++					ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
++
++	if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) {
++		ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
++	}
++
++	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++	return 0;
++}
++
++/**
++ * This function is called when an EP is disabled due to disconnect or
++ * change in configuration. Any pending requests will terminate with a
++ * status of -ESHUTDOWN.
++ *
++ * This function modifies the dwc_otg_ep_t data structure for this EP,
++ * and then calls dwc_otg_ep_deactivate.
++ */
++static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t *pcd = 0;
++	unsigned long flags;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep);
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	if (!usb_ep || !ep->desc) {
++		DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
++			usb_ep ? ep->ep.name : NULL);
++		return -EINVAL;
++	}
++
++	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++
++	dwc_otg_request_nuke(ep);
++
++	dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
++	ep->desc = 0;
++	ep->stopped = 1;
++
++	if(ep->dwc_ep.is_in) {
++		dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
++		release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
++		release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
++	}
++
++	/* Free DMA Descriptors */
++	pcd = ep->pcd;
++
++	SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
++
++	if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) {
++		dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name);
++	return 0;
++}
++
++
++/**
++ * This function allocates a request object to use with the specified
++ * endpoint.
++ *
++ * @param ep The endpoint to be used with with the request
++ * @param gfp_flags the GFP_* flags to use.
++ */
++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++						     int gfp_flags
++#else
++						     gfp_t gfp_flags
++#endif
++						   )
++{
++	dwc_otg_pcd_request_t *req;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags);
++	if (0 == ep) {
++		DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
++		return 0;
++	}
++	req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags);
++	if (0 == req) {
++		DWC_WARN("%s() %s\n", __func__,
++				 "request allocation failed!\n");
++		return 0;
++	}
++	memset(req, 0, sizeof(dwc_otg_pcd_request_t));
++	req->req.dma = DMA_ADDR_INVALID;
++	INIT_LIST_HEAD(&req->queue);
++	return &req->req;
++}
++
++/**
++ * This function frees a request object.
++ *
++ * @param ep The endpoint associated with the request
++ * @param req The request being freed
++ */
++static void dwc_otg_pcd_free_request(struct usb_ep *ep,
++					 struct usb_request *req)
++{
++	dwc_otg_pcd_request_t *request;
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req);
++
++	if (0 == ep || 0 == req) {
++		DWC_WARN("%s() %s\n", __func__,
++				 "Invalid ep or req argument!\n");
++		return;
++	}
++
++	request = container_of(req, dwc_otg_pcd_request_t, req);
++	kfree(request);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
++/**
++ * This function allocates an I/O buffer to be used for a transfer
++ * to/from the specified endpoint.
++ *
++ * @param usb_ep The endpoint to be used with with the request
++ * @param bytes The desired number of bytes for the buffer
++ * @param dma Pointer to the buffer's DMA address; must be valid
++ * @param gfp_flags the GFP_* flags to use.
++ * @return address of a new buffer or null is buffer could not be allocated.
++ */
++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
++				      dma_addr_t *dma,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++				      int gfp_flags
++#else
++				      gfp_t gfp_flags
++#endif
++				    )
++{
++	void *buf;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t *pcd = 0;
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	pcd = ep->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
++				dma, gfp_flags);
++
++	/* Check dword alignment */
++	if ((bytes & 0x3UL) != 0) {
++		DWC_WARN("%s() Buffer size is not a multiple of"
++				 "DWORD size (%d)",__func__, bytes);
++	}
++
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags);
++	}
++	else {
++		buf = kmalloc(bytes, gfp_flags);
++	}
++
++	/* Check dword alignment */
++	if (((int)buf & 0x3UL) != 0) {
++		DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
++					__func__, buf);
++	}
++
++	return buf;
++}
++
++/**
++ * This function frees an I/O buffer that was allocated by alloc_buffer.
++ *
++ * @param usb_ep the endpoint associated with the buffer
++ * @param buf address of the buffer
++ * @param dma The buffer's DMA address
++ * @param bytes The number of bytes of the buffer
++ */
++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
++					dma_addr_t dma, unsigned bytes)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t *pcd = 0;
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	pcd = ep->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes);
++
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		dma_free_coherent (NULL, bytes, buf, dma);
++	}
++	else {
++		kfree(buf);
++	}
++}
++#endif
++
++
++/**
++ * This function is used to submit an I/O Request to an EP.
++ *
++ *	- When the request completes the request's completion callback
++ *	  is called to return the request to the driver.
++ *	- An EP, except control EPs, may have multiple requests
++ *	  pending.
++ *	- Once submitted the request cannot be examined or modified.
++ *	- Each request is turned into one or more packets.
++ *	- A BULK EP can queue any amount of data; the transfer is
++ *	  packetized.
++ *	- Zero length Packets are specified with the request 'zero'
++ *	  flag.
++ */
++static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep,
++				struct usb_request *usb_req,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++				int gfp_flags
++#else
++				gfp_t gfp_flags
++#endif
++			      )
++{
++	int prevented = 0;
++	dwc_otg_pcd_request_t *req;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t	*pcd;
++	unsigned long flags = 0;
++	dwc_otg_core_if_t *_core_if;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n",
++			__func__, usb_ep, usb_req, gfp_flags);
++
++	req = container_of(usb_req, dwc_otg_pcd_request_t, req);
++	if (!usb_req || !usb_req->complete || !usb_req->buf ||
++			!list_empty(&req->queue)) {
++		DWC_WARN("%s, bad params\n", __func__);
++		return -EINVAL;
++	}
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	pcd = ep->pcd;
++	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++
++	DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
++			   usb_ep->name, usb_req, usb_req->length, usb_req->buf);
++
++	if (!GET_CORE_IF(pcd)->core_params->opt) {
++		if (ep->dwc_ep.num != 0) {
++			DWC_ERROR("%s queue req %p, len %d buf %p\n",
++					  usb_ep->name, usb_req, usb_req->length, usb_req->buf);
++		}
++	}
++
++	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++
++
++	/**************************************************
++         New add by kaiker ,for DMA mode bug
++	************************************************/
++	//by kaiker ,for RT3052 USB OTG device mode
++
++	_core_if = GET_CORE_IF(pcd);
++
++	if (_core_if->dma_enable)
++	{
++		 usb_req->dma = virt_to_phys((void *)usb_req->buf);
++
++		if(ep->dwc_ep.is_in)
++		{
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) || defined(CONFIG_MIPS)
++			if(usb_req->length)
++				dma_cache_wback_inv((unsigned long)usb_req->buf, usb_req->length + 2);
++#endif
++		}
++	}
++
++
++
++#if defined(DEBUG) & defined(VERBOSE)
++	dump_msg(usb_req->buf, usb_req->length);
++#endif
++
++	usb_req->status = -EINPROGRESS;
++	usb_req->actual = 0;
++
++	/*
++	 * For EP0 IN without premature status, zlp is required?
++	 */
++	if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
++		DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name);
++		//_req->zero = 1;
++	}
++
++	/* Start the transfer */
++	if (list_empty(&ep->queue) && !ep->stopped) {
++		/* EP0 Transfer? */
++		if (ep->dwc_ep.num == 0) {
++			switch (pcd->ep0state) {
++			case EP0_IN_DATA_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++						"%s ep0: EP0_IN_DATA_PHASE\n",
++						__func__);
++				break;
++
++			case EP0_OUT_DATA_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++						"%s ep0: EP0_OUT_DATA_PHASE\n",
++						__func__);
++				if (pcd->request_config) {
++					/* Complete STATUS PHASE */
++					ep->dwc_ep.is_in = 1;
++					pcd->ep0state = EP0_IN_STATUS_PHASE;
++				}
++				break;
++
++			case EP0_IN_STATUS_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++						"%s ep0: EP0_IN_STATUS_PHASE\n",
++						__func__);
++				break;
++
++			default:
++				DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
++						pcd->ep0state);
++				SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++				return -EL2HLT;
++			}
++			ep->dwc_ep.dma_addr = usb_req->dma;
++			ep->dwc_ep.start_xfer_buff = usb_req->buf;
++			ep->dwc_ep.xfer_buff = usb_req->buf;
++			ep->dwc_ep.xfer_len = usb_req->length;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			if(usb_req->zero) {
++				if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0)
++						&& (ep->dwc_ep.xfer_len != 0)) {
++					ep->dwc_ep.sent_zlp = 1;
++				}
++
++			}
++
++			dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
++		}
++		else {
++
++			uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
++
++			/* Setup and start the Transfer */
++			ep->dwc_ep.dma_addr = usb_req->dma;
++			ep->dwc_ep.start_xfer_buff = usb_req->buf;
++			ep->dwc_ep.xfer_buff = usb_req->buf;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = usb_req->length;
++			ep->dwc_ep.xfer_len = 0;
++			ep->dwc_ep.xfer_count = 0;
++
++			if(max_transfer > MAX_TRANSFER_SIZE) {
++				ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
++			} else {
++				ep->dwc_ep.maxxfer = max_transfer;
++			}
++
++			if(usb_req->zero) {
++				if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
++						&& (ep->dwc_ep.total_len != 0)) {
++					ep->dwc_ep.sent_zlp = 1;
++				}
++
++			}
++			dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
++		}
++	}
++
++	if ((req != 0) || prevented) {
++		++pcd->request_pending;
++		list_add_tail(&req->queue, &ep->queue);
++		if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) {
++			/** @todo NGS Create a function for this. */
++			diepmsk_data_t diepmsk = { .d32 = 0};
++			diepmsk.b.intktxfemp = 1;
++			if(&GET_CORE_IF(pcd)->multiproc_int_enable) {
++				dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num],
++							0, diepmsk.d32);
++			} else {
++				dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
++			}
++		}
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++	return 0;
++}
++
++/**
++ * This function cancels an I/O request from an EP.
++ */
++static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep,
++				  struct usb_request *usb_req)
++{
++	dwc_otg_pcd_request_t *req;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t	*pcd;
++	unsigned long flags;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req);
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) {
++		DWC_WARN("%s, bad argument\n", __func__);
++		return -EINVAL;
++	}
++	pcd = ep->pcd;
++	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++	DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name,
++					ep->dwc_ep.is_in ? "IN" : "OUT",
++					usb_req);
++
++	/* make sure it's actually queued on this endpoint */
++	list_for_each_entry(req, &ep->queue, queue)
++	{
++		if (&req->req == usb_req) {
++			break;
++		}
++	}
++
++	if (&req->req != usb_req) {
++		SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++		return -EINVAL;
++	}
++
++	if (!list_empty(&req->queue)) {
++		dwc_otg_request_done(ep, req, -ECONNRESET);
++	}
++	else {
++		req = 0;
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++	return req ? 0 : -EOPNOTSUPP;
++}
++
++/**
++ * usb_ep_set_halt stalls an endpoint.
++ *
++ * usb_ep_clear_halt clears an endpoint halt and resets its data
++ * toggle.
++ *
++ * Both of these functions are implemented with the same underlying
++ * function. The behavior depends on the value argument.
++ *
++ * @param[in] usb_ep the Endpoint to halt or clear halt.
++ * @param[in] value
++ *	- 0 means clear_halt.
++ *	- 1 means set_halt,
++ *	- 2 means clear stall lock flag.
++ *	- 3 means set  stall lock flag.
++ */
++static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value)
++{
++	int retval = 0;
++	unsigned long flags;
++	dwc_otg_pcd_ep_t *ep = 0;
++
++
++	DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value);
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++
++	if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) ||
++			ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++	if (!list_empty(&ep->queue)) {
++		DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name);
++		retval = -EAGAIN;
++	}
++	else if (value == 0) {
++		dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if,
++					&ep->dwc_ep);
++	}
++	else if(value == 1) {
++		if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) {
++			dtxfsts_data_t txstatus;
++			fifosize_data_t txfifosize;
++
++			txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]);
++			txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts);
++
++			if(txstatus.b.txfspcavail < txfifosize.b.depth) {
++				DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name);
++				retval = -EAGAIN;
++			}
++			else {
++				if (ep->dwc_ep.num == 0) {
++					ep->pcd->ep0state = EP0_STALL;
++				}
++
++				ep->stopped = 1;
++				dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
++							&ep->dwc_ep);
++			}
++		}
++		else {
++			if (ep->dwc_ep.num == 0) {
++				ep->pcd->ep0state = EP0_STALL;
++			}
++
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
++						&ep->dwc_ep);
++		}
++	}
++	else if (value == 2) {
++		ep->dwc_ep.stall_clear_flag = 0;
++	}
++	else if (value == 3) {
++		ep->dwc_ep.stall_clear_flag = 1;
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
++	return retval;
++}
++
++/**
++ * This function allocates a DMA Descriptor chain for the Endpoint
++ * buffer to be used for a transfer to/from the specified endpoint.
++ */
++dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count)
++{
++
++	return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL);
++}
++
++/**
++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
++ */
++void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count)
++{
++	dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr);
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++
++ 	dsts_data_t 		dsts = { .d32 = 0};
++	depctl_data_t 		depctl = { .d32 = 0 };
++	volatile uint32_t 	*addr;
++ 	int 			i, j;
++
++	if(dwc_ep->is_in)
++		dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
++	else
++		dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
++
++
++	/** Allocate descriptors for double buffering */
++	dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2);
++	if(dwc_ep->desc_addr) {
++		DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
++		return;
++	}
++
++	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++	/** ISO OUT EP */
++	if(dwc_ep->is_in == 0) {
++		desc_sts_data_t sts = { .d32 =0 };
++		dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
++		dma_addr_t dma_ad;
++		uint32_t data_per_desc;
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++			core_if->dev_if->out_ep_regs[dwc_ep->num];
++		int	offset;
++
++		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++		dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma));
++
++		/** Buffer 0 descriptors setup */
++		dma_ad = dwc_ep->dma_addr0;
++
++		sts.b_iso_out.bs = BS_HOST_READY;
++		sts.b_iso_out.rxsts = 0;
++		sts.b_iso_out.l = 0;
++		sts.b_iso_out.sp = 0;
++		sts.b_iso_out.ioc = 0;
++		sts.b_iso_out.pid = 0;
++		sts.b_iso_out.framenum = 0;
++
++		offset = 0;
++		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++		{
++
++			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++			{
++				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++
++				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++				sts.b_iso_out.rxbytes = data_per_desc;
++				writel((uint32_t)dma_ad, &dma_desc->buf);
++				writel(sts.d32, &dma_desc->status);
++
++				offset += data_per_desc;
++				dma_desc ++;
++				(uint32_t)dma_ad += data_per_desc;
++			}
++		}
++
++		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++		{
++			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++
++			offset += data_per_desc;
++			dma_desc ++;
++			(uint32_t)dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++			dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++		dma_desc ++;
++
++		/** Buffer 1 descriptors setup */
++		sts.b_iso_out.ioc = 0;
++		dma_ad = dwc_ep->dma_addr1;
++
++		offset = 0;
++		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++		{
++			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++			{
++				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++				sts.b_iso_out.rxbytes = data_per_desc;
++				writel((uint32_t)dma_ad, &dma_desc->buf);
++				writel(sts.d32, &dma_desc->status);
++
++				offset += data_per_desc;
++				dma_desc ++;
++				(uint32_t)dma_ad += data_per_desc;
++			}
++		}
++		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++		{
++			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++
++			offset += data_per_desc;
++			dma_desc ++;
++			(uint32_t)dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		sts.b_iso_out.l = 1;
++		data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++			dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++
++		dwc_ep->next_frame = 0;
++
++		/** Write dma_ad into DOEPDMA register */
++		dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
++
++	}
++	/** ISO IN EP */
++	else {
++		desc_sts_data_t sts = { .d32 =0 };
++		dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
++		dma_addr_t dma_ad;
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++			core_if->dev_if->in_ep_regs[dwc_ep->num];
++		unsigned int		   frmnumber;
++		fifosize_data_t		txfifosize,rxfifosize;
++
++		txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts);
++		rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz);
++
++
++		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++
++		dma_ad = dwc_ep->dma_addr0;
++
++		dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++		sts.b_iso_in.bs = BS_HOST_READY;
++		sts.b_iso_in.txsts = 0;
++		sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0;
++		sts.b_iso_in.ioc = 0;
++		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++
++
++		frmnumber = dwc_ep->next_frame;
++
++		sts.b_iso_in.framenum = frmnumber;
++		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++		sts.b_iso_in.l = 0;
++
++		/** Buffer 0 descriptors setup */
++		for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
++		{
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++			dma_desc ++;
++
++			(uint32_t)dma_ad += dwc_ep->data_per_frame;
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++		}
++
++		sts.b_iso_in.ioc = 1;
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++		++dma_desc;
++
++		/** Buffer 1 descriptors setup */
++		sts.b_iso_in.ioc = 0;
++		dma_ad = dwc_ep->dma_addr1;
++
++		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++		{
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++			dma_desc ++;
++
++			(uint32_t)dma_ad += dwc_ep->data_per_frame;
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++
++			sts.b_iso_in.ioc = 0;
++		}
++		sts.b_iso_in.ioc = 1;
++		sts.b_iso_in.l = 1;
++
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++
++		dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
++
++		/** Write dma_ad into diepdma register */
++		dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
++	}
++	/** Enable endpoint, clear nak  */
++	depctl.d32 = 0;
++	depctl.b.epena = 1;
++	depctl.b.usbactep = 1;
++	depctl.b.cnak = 1;
++
++	dwc_modify_reg32(addr, depctl.d32,depctl.d32);
++	depctl.d32 = dwc_read_reg32(addr);
++}
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++
++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t 		depctl = { .d32 = 0 };
++	volatile uint32_t 	*addr;
++
++
++	if(ep->is_in) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++
++	if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) {
++		return;
++	} else {
++		deptsiz_data_t		deptsiz = { .d32 = 0 };
++
++		ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
++		ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) /
++				ep->maxpacket;
++		ep->xfer_count = 0;
++		ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++		ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++
++		if(ep->is_in) {
++			/* Program the transfer size and packet count
++			 *	as follows: xfersize = N * maxpacket +
++			 *	short_packet pktcnt = N + (short_packet
++			 *	exist ? 1 : 0)
++			 */
++			deptsiz.b.mc = ep->pkt_per_frm;
++			deptsiz.b.xfersize = ep->xfer_len;
++			deptsiz.b.pktcnt =
++				(ep->xfer_len - 1 + ep->maxpacket) /
++				ep->maxpacket;
++			dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
++
++			/* Write the DMA register */
++			dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
++
++		} else {
++			deptsiz.b.pktcnt =
++					(ep->xfer_len + (ep->maxpacket - 1)) /
++					ep->maxpacket;
++			deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++			dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
++
++			/* Write the DMA register */
++			dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr);
++
++		}
++		/** Enable endpoint, clear nak  */
++		depctl.d32 = 0;
++		dwc_modify_reg32(addr, depctl.d32,depctl.d32);
++
++		depctl.b.epena = 1;
++		depctl.b.cnak = 1;
++
++		dwc_modify_reg32(addr, depctl.d32,depctl.d32);
++	}
++}
++
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer.	 For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ 	if(core_if->dma_enable) {
++		if(core_if->dma_desc_enable) {
++			if(ep->is_in) {
++				ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
++			} else {
++				ep->desc_cnt = ep->pkt_cnt;
++			}
++			dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
++		} else {
++			if(core_if->pti_enh_enable) {
++				dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
++			} else {
++				ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++				ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++				dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++			}
++		}
++	} else {
++		ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++		ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++		dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer.	 For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl = { .d32 = 0 };
++	volatile uint32_t *addr;
++
++	if(ep->is_in == 1) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	}
++	else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	/* disable the ep */
++	depctl.d32 = dwc_read_reg32(addr);
++
++	depctl.b.epdis = 1;
++	depctl.b.snak = 1;
++
++	dwc_write_reg32(addr, depctl.d32);
++
++	if(core_if->dma_desc_enable &&
++		ep->iso_desc_addr && ep->iso_dma_desc_addr) {
++		dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2);
++	}
++
++	/* reset varibales */
++	ep->dma_addr0 = 0;
++	ep->dma_addr1 = 0;
++	ep->xfer_buff0 = 0;
++	ep->xfer_buff1 = 0;
++	ep->data_per_frame = 0;
++	ep->data_pattern_frame = 0;
++	ep->sync_frame = 0;
++	ep->buf_proc_intrvl = 0;
++	ep->bInterval = 0;
++	ep->proc_buf_num = 0;
++	ep->pkt_per_frm = 0;
++	ep->pkt_per_frm = 0;
++	ep->desc_cnt = 	0;
++	ep->iso_desc_addr = 0;
++	ep->iso_dma_desc_addr = 0;
++}
++
++
++/**
++ * This function is used to submit an ISOC Transfer Request to an EP.
++ *
++ *	- Every time a sync period completes the request's completion callback
++ *	  is called to provide data to the gadget driver.
++ *	- Once submitted the request cannot be modified.
++ *	- Each request is turned into periodic data packets untill ISO
++ *	  Transfer is stopped..
++ */
++static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++				int gfp_flags
++#else
++				gfp_t gfp_flags
++#endif
++)
++{
++	dwc_otg_pcd_ep_t 	*ep;
++	dwc_otg_pcd_t		*pcd;
++	dwc_ep_t 		*dwc_ep;
++	unsigned long 		flags = 0;
++	int32_t 		frm_data;
++	dwc_otg_core_if_t	*core_if;
++	dcfg_data_t		dcfg;
++	dsts_data_t		dsts;
++
++
++	if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
++		DWC_WARN("%s, bad params\n", __func__);
++		return -EINVAL;
++	}
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++
++	if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	pcd = ep->pcd;
++	core_if = GET_CORE_IF(pcd);
++
++	dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
++
++	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++
++	dwc_ep = &ep->dwc_ep;
++
++	if(ep->iso_req) {
++		DWC_WARN("%s, iso request in progress\n", __func__);
++	}
++	req->status = -EINPROGRESS;
++
++	dwc_ep->dma_addr0 = req->dma0;
++	dwc_ep->dma_addr1 = req->dma1;
++
++	dwc_ep->xfer_buff0 = req->buf0;
++	dwc_ep->xfer_buff1 = req->buf1;
++
++	ep->iso_req = req;
++
++	dwc_ep->data_per_frame = req->data_per_frame;
++
++	/** @todo - pattern data support is to be implemented in the future */
++	dwc_ep->data_pattern_frame = req->data_pattern_frame;
++	dwc_ep->sync_frame = req->sync_frame;
++
++	dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl;
++
++	dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
++
++	dwc_ep->proc_buf_num = 0;
++
++	dwc_ep->pkt_per_frm = 0;
++	frm_data = ep->dwc_ep.data_per_frame;
++	while(frm_data > 0) {
++		dwc_ep->pkt_per_frm++;
++		frm_data -= ep->dwc_ep.maxpacket;
++	}
++
++	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++	if(req->flags & USB_REQ_ISO_ASAP) {
++		dwc_ep->next_frame = dsts.b.soffn + 1;
++		if(dwc_ep->bInterval != 1){
++			dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval);
++		}
++	} else {
++		dwc_ep->next_frame = req->start_frame;
++	}
++
++
++	if(!core_if->pti_enh_enable) {
++		dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
++	} else {
++		dwc_ep->pkt_cnt =
++			(dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
++			- 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
++	}
++
++	if(core_if->dma_desc_enable) {
++		dwc_ep->desc_cnt =
++			dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
++	}
++
++	dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL);
++	if(!dwc_ep->pkt_info) {
++		return -ENOMEM;
++	}
++	if(core_if->pti_enh_enable) {
++		memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	}
++
++	dwc_ep->cur_pkt = 0;
++
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++	dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
++
++	return 0;
++}
++
++/**
++ * This function stops ISO EP Periodic Data Transfer.
++ */
++static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t	*pcd;
++	dwc_ep_t *dwc_ep;
++	unsigned long flags;
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++
++	if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	pcd = ep->pcd;
++
++	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	dwc_ep = &ep->dwc_ep;
++
++	dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
++
++	kfree(dwc_ep->pkt_info);
++
++	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++
++	if(ep->iso_req != req) {
++		return -EINVAL;
++	}
++
++	req->status = -ECONNRESET;
++
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++
++	ep->iso_req = 0;
++
++	return 0;
++}
++
++/**
++ * This function is used for perodical data exchnage between PCD and gadget drivers.
++ * for Isochronous EPs
++ *
++ *	- Every time a sync period completes this function is called to
++ *	  perform data exchange between PCD and gadget
++ */
++void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req)
++{
++ 	int i;
++	struct usb_gadget_iso_packet_descriptor *iso_packet;
++	dwc_ep_t *dwc_ep;
++
++	dwc_ep = &ep->dwc_ep;
++
++	if(ep->iso_req->status == -ECONNRESET) {
++		DWC_PRINT("Device has already disconnected\n");
++		/*Device has been disconnected*/
++		return;
++	}
++
++	if(dwc_ep->proc_buf_num != 0) {
++		iso_packet = ep->iso_req->iso_packet_desc0;
++	}
++
++	else {
++		iso_packet = ep->iso_req->iso_packet_desc1;
++	}
++
++	/* Fill in ISOC packets descriptors & pass to gadget driver*/
++
++	for(i = 0; i < dwc_ep->pkt_cnt; ++i) {
++		iso_packet[i].status = dwc_ep->pkt_info[i].status;
++		iso_packet[i].offset = dwc_ep->pkt_info[i].offset;
++		iso_packet[i].actual_length = dwc_ep->pkt_info[i].length;
++		dwc_ep->pkt_info[i].status = 0;
++		dwc_ep->pkt_info[i].offset = 0;
++		dwc_ep->pkt_info[i].length = 0;
++	}
++
++	/* Call callback function to process data buffer */
++	ep->iso_req->status = 0;/* success */
++
++	SPIN_UNLOCK(&ep->pcd->lock);
++	ep->iso_req->process_buffer(&ep->ep, ep->iso_req);
++	SPIN_LOCK(&ep->pcd->lock);
++}
++
++
++static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++				int gfp_flags
++#else
++				gfp_t gfp_flags
++#endif
++)
++{
++	struct usb_iso_request	*pReq = NULL;
++	uint32_t		req_size;
++
++
++	req_size = sizeof(struct usb_iso_request);
++	req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
++
++
++	pReq = kmalloc(req_size, gfp_flags);
++	if (!pReq) {
++		DWC_WARN("%s, can't allocate Iso Request\n", __func__);
++		return 0;
++	}
++	pReq->iso_packet_desc0 = (void*) (pReq +  1);
++
++	pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
++
++	return pReq;
++}
++
++static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
++{
++	kfree(req);
++}
++
++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops =
++{
++	.ep_ops =
++	{
++		.enable		= dwc_otg_pcd_ep_enable,
++		.disable	= dwc_otg_pcd_ep_disable,
++
++		.alloc_request	= dwc_otg_pcd_alloc_request,
++		.free_request	= dwc_otg_pcd_free_request,
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
++		.alloc_buffer	= dwc_otg_pcd_alloc_buffer,
++		.free_buffer	= dwc_otg_pcd_free_buffer,
++#endif
++
++		.queue		= dwc_otg_pcd_ep_queue,
++		.dequeue	= dwc_otg_pcd_ep_dequeue,
++
++		.set_halt	= dwc_otg_pcd_ep_set_halt,
++		.fifo_status	= 0,
++		.fifo_flush = 0,
++	},
++	.iso_ep_start		= dwc_otg_pcd_iso_ep_start,
++	.iso_ep_stop		= dwc_otg_pcd_iso_ep_stop,
++	.alloc_iso_request 	= dwc_otg_pcd_alloc_iso_request,
++	.free_iso_request	= dwc_otg_pcd_free_iso_request,
++};
++
++#else
++
++
++static struct usb_ep_ops dwc_otg_pcd_ep_ops =
++{
++	.enable		= dwc_otg_pcd_ep_enable,
++	.disable	= dwc_otg_pcd_ep_disable,
++
++	.alloc_request	= dwc_otg_pcd_alloc_request,
++	.free_request	= dwc_otg_pcd_free_request,
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
++	.alloc_buffer	= dwc_otg_pcd_alloc_buffer,
++	.free_buffer	= dwc_otg_pcd_free_buffer,
++#endif
++
++	.queue		= dwc_otg_pcd_ep_queue,
++	.dequeue	= dwc_otg_pcd_ep_dequeue,
++
++	.set_halt	= dwc_otg_pcd_ep_set_halt,
++	.fifo_status	= 0,
++	.fifo_flush = 0,
++
++
++};
++
++#endif /* DWC_EN_ISOC */
++/*	Gadget Operations */
++/**
++ * The following gadget operations will be implemented in the DWC_otg
++ * PCD. Functions in the API that are not described below are not
++ * implemented.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
++ * wrapper function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper functions
++ * (except for ioctl, which doesn't have a wrapper function). Within
++ * each section, the corresponding DWC_otg PCD function name is
++ * specified.
++ *
++ */
++
++/**
++ *Gets the USB Frame number of the last SOF.
++ */
++static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget)
++{
++	dwc_otg_pcd_t *pcd;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
++
++	if (gadget == 0) {
++		return -ENODEV;
++	}
++	else {
++		pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
++		dwc_otg_get_frame_number(GET_CORE_IF(pcd));
++	}
++
++	return 0;
++}
++
++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd)
++{
++	uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl);
++	gotgctl_data_t mem;
++	gotgctl_data_t val;
++
++	val.d32 = dwc_read_reg32(addr);
++	if (val.b.sesreq) {
++		DWC_ERROR("Session Request Already active!\n");
++			return;
++	}
++
++	DWC_NOTICE("Session Request Initated\n");
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.sesreq = 1;
++	dwc_write_reg32(addr, mem.d32);
++
++	/* Start the SRP timer */
++	dwc_otg_pcd_start_srp_timer(pcd);
++	return;
++}
++
++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set)
++{
++	dctl_data_t dctl = {.d32=0};
++	volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl);
++
++	if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
++		if (pcd->remote_wakeup_enable) {
++			if (set) {
++				dctl.b.rmtwkupsig = 1;
++				dwc_modify_reg32(addr, 0, dctl.d32);
++				DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
++				mdelay(1);
++				dwc_modify_reg32(addr, dctl.d32, 0);
++				DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
++			}
++			else {
++			}
++		}
++		else {
++			DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
++		}
++	}
++	return;
++}
++
++/**
++ * Initiates Session Request Protocol (SRP) to wakeup the host if no
++ * session is in progress. If a session is already in progress, but
++ * the device is suspended, remote wakeup signaling is started.
++ *
++ */
++static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget)
++{
++	unsigned long flags;
++	dwc_otg_pcd_t *pcd;
++	dsts_data_t		dsts;
++	gotgctl_data_t	gotgctl;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
++
++	if (gadget == 0) {
++		return -ENODEV;
++	}
++	else {
++		pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
++	}
++	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++
++	/*
++	 * This function starts the Protocol if no session is in progress. If
++	 * a session is already in progress, but the device is suspended,
++	 * remote wakeup signaling is started.
++	 */
++
++	/* Check if valid session */
++	gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
++	if (gotgctl.b.bsesvld) {
++		/* Check if suspend state */
++		dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts));
++		if (dsts.b.suspsts) {
++			dwc_otg_pcd_remote_wakeup(pcd, 1);
++		}
++	}
++	else {
++		dwc_otg_pcd_initiate_srp(pcd);
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++	return 0;
++}
++
++static const struct usb_gadget_ops dwc_otg_pcd_ops =
++{
++	.get_frame	 = dwc_otg_pcd_get_frame,
++	.wakeup		 = dwc_otg_pcd_wakeup,
++	// current versions must always be self-powered
++};
++
++/**
++ * This function updates the otg values in the gadget structure.
++ */
++void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset)
++{
++
++	if (!pcd->gadget.is_otg)
++		return;
++
++	if (reset) {
++		pcd->b_hnp_enable = 0;
++		pcd->a_hnp_support = 0;
++		pcd->a_alt_hnp_support = 0;
++	}
++
++	pcd->gadget.b_hnp_enable = pcd->b_hnp_enable;
++	pcd->gadget.a_hnp_support =  pcd->a_hnp_support;
++	pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support;
++}
++
++/**
++ * This function is the top level PCD interrupt handler.
++ */
++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++				   , struct pt_regs *r
++#endif
++				 )
++{
++	dwc_otg_pcd_t *pcd = dev;
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_pcd_handle_intr(pcd);
++	return IRQ_RETVAL(retval);
++}
++
++/**
++ * PCD Callback function for initializing the PCD when switching to
++ * device mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_start_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++
++	/*
++	 * Initialized the Core for Device mode.
++	 */
++	if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
++		dwc_otg_core_dev_init(GET_CORE_IF(pcd));
++	}
++	return 1;
++}
++
++/**
++ * PCD Callback function for stopping the PCD when switching to Host
++ * mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_stop_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++	extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd);
++
++	dwc_otg_pcd_stop(pcd);
++	return 1;
++}
++
++
++/**
++ * PCD Callback function for notifying the PCD when resuming from
++ * suspend.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_suspend_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++
++	if (pcd->driver && pcd->driver->resume) {
++		SPIN_UNLOCK(&pcd->lock);
++		pcd->driver->suspend(&pcd->gadget);
++		SPIN_LOCK(&pcd->lock);
++	}
++
++	return 1;
++}
++
++
++/**
++ * PCD Callback function for notifying the PCD when resuming from
++ * suspend.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_resume_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++
++	if (pcd->driver && pcd->driver->resume) {
++			SPIN_UNLOCK(&pcd->lock);
++			pcd->driver->resume(&pcd->gadget);
++			SPIN_LOCK(&pcd->lock);
++	}
++
++	/* Stop the SRP timeout timer. */
++	if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ||
++		(!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
++		if (GET_CORE_IF(pcd)->srp_timer_started) {
++			GET_CORE_IF(pcd)->srp_timer_started = 0;
++			del_timer(&pcd->srp_timer);
++		}
++	}
++	return 1;
++}
++
++
++/**
++ * PCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t pcd_callbacks =
++{
++	.start = dwc_otg_pcd_start_cb,
++	.stop = dwc_otg_pcd_stop_cb,
++	.suspend = dwc_otg_pcd_suspend_cb,
++	.resume_wakeup = dwc_otg_pcd_resume_cb,
++	.p = 0, /* Set at registration */
++};
++
++/**
++ * This function is called when the SRP timer expires.	The SRP should
++ * complete within 6 seconds.
++ */
++static void srp_timeout(unsigned long ptr)
++{
++	gotgctl_data_t gotgctl;
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr;
++	volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
++
++	gotgctl.d32 = dwc_read_reg32(addr);
++
++	core_if->srp_timer_started = 0;
++
++	if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++		(core_if->core_params->i2c_enable)) {
++		DWC_PRINT("SRP Timeout\n");
++
++		if ((core_if->srp_success) &&
++			(gotgctl.b.bsesvld)) {
++			if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++				core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++			}
++
++			/* Clear Session Request */
++			gotgctl.d32 = 0;
++			gotgctl.b.sesreq = 1;
++			dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
++					  gotgctl.d32, 0);
++
++			core_if->srp_success = 0;
++		}
++		else {
++			DWC_ERROR("Device not connected/responding\n");
++			gotgctl.b.sesreq = 0;
++			dwc_write_reg32(addr, gotgctl.d32);
++		}
++	}
++	else if (gotgctl.b.sesreq) {
++		DWC_PRINT("SRP Timeout\n");
++
++		DWC_ERROR("Device not connected/responding\n");
++		gotgctl.b.sesreq = 0;
++		dwc_write_reg32(addr, gotgctl.d32);
++	}
++	else {
++		DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32);
++	}
++}
++
++/**
++ * Start the SRP timer to detect when the SRP does not complete within
++ * 6 seconds.
++ *
++ * @param pcd the pcd structure.
++ */
++void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd)
++{
++	struct timer_list *srp_timer = &pcd->srp_timer;
++	GET_CORE_IF(pcd)->srp_timer_started = 1;
++	init_timer(srp_timer);
++	srp_timer->function = srp_timeout;
++	srp_timer->data = (unsigned long)GET_CORE_IF(pcd);
++	srp_timer->expires = jiffies + (HZ*6);
++	add_timer(srp_timer);
++}
++
++/**
++ * Tasklet
++ *
++ */
++extern void start_next_request(dwc_otg_pcd_ep_t *ep);
++
++static void start_xfer_tasklet_func (unsigned long data)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data;
++	dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if;
++
++	int i;
++	depctl_data_t diepctl;
++
++	DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
++
++	diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl);
++
++	if (pcd->ep0.queue_sof) {
++		pcd->ep0.queue_sof = 0;
++		start_next_request (&pcd->ep0);
++		// break;
++	}
++
++	for (i=0; i<core_if->dev_if->num_in_eps; i++)
++	{
++		depctl_data_t diepctl;
++		diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl);
++
++		if (pcd->in_ep[i].queue_sof) {
++			pcd->in_ep[i].queue_sof = 0;
++			start_next_request (&pcd->in_ep[i]);
++			// break;
++		}
++	}
++
++	return;
++}
++
++
++
++
++
++
++
++static struct tasklet_struct start_xfer_tasklet = {
++	.next = NULL,
++	.state = 0,
++	.count = ATOMIC_INIT(0),
++	.func = start_xfer_tasklet_func,
++	.data = 0,
++};
++/**
++ * This function initialized the pcd Dp structures to there default
++ * state.
++ *
++ * @param pcd the pcd structure.
++ */
++void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd)
++{
++	static const char * names[] =
++		{
++
++			"ep0",
++			"ep1in",
++			"ep2in",
++			"ep3in",
++			"ep4in",
++			"ep5in",
++			"ep6in",
++			"ep7in",
++			"ep8in",
++			"ep9in",
++			"ep10in",
++			"ep11in",
++			"ep12in",
++			"ep13in",
++			"ep14in",
++			"ep15in",
++			"ep1out",
++			"ep2out",
++			"ep3out",
++			"ep4out",
++			"ep5out",
++			"ep6out",
++			"ep7out",
++			"ep8out",
++			"ep9out",
++			"ep10out",
++			"ep11out",
++			"ep12out",
++			"ep13out",
++			"ep14out",
++			"ep15out"
++
++	};
++
++	int i;
++	int in_ep_cntr, out_ep_cntr;
++	uint32_t hwcfg1;
++	uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
++	uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
++	dwc_otg_pcd_ep_t *ep;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
++
++	INIT_LIST_HEAD (&pcd->gadget.ep_list);
++	pcd->gadget.ep0 = &pcd->ep0.ep;
++	pcd->gadget.speed = USB_SPEED_UNKNOWN;
++
++	INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list);
++
++	/**
++	 * Initialize the EP0 structure.
++	 */
++	ep = &pcd->ep0;
++
++	/* Init EP structure */
++	ep->desc = 0;
++	ep->pcd = pcd;
++	ep->stopped = 1;
++
++	/* Init DWC ep structure */
++	ep->dwc_ep.num = 0;
++	ep->dwc_ep.active = 0;
++	ep->dwc_ep.tx_fifo_num = 0;
++	/* Control until ep is actvated */
++	ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++	ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++	ep->dwc_ep.dma_addr = 0;
++	ep->dwc_ep.start_xfer_buff = 0;
++	ep->dwc_ep.xfer_buff = 0;
++	ep->dwc_ep.xfer_len = 0;
++	ep->dwc_ep.xfer_count = 0;
++	ep->dwc_ep.sent_zlp = 0;
++	ep->dwc_ep.total_len = 0;
++	ep->queue_sof = 0;
++	ep->dwc_ep.desc_addr = 0;
++	ep->dwc_ep.dma_desc_addr = 0;
++
++
++	/* Init the usb_ep structure. */
++	ep->ep.name = names[0];
++	ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
++
++	/**
++	 * @todo NGS: What should the max packet size be set to
++	 * here?  Before EP type is set?
++	 */
++	ep->ep.maxpacket = MAX_PACKET_SIZE;
++
++	list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
++
++	INIT_LIST_HEAD (&ep->queue);
++	/**
++	 * Initialize the EP structures.
++	 */
++	in_ep_cntr = 0;
++	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
++
++	for (i = 1; in_ep_cntr < num_in_eps; i++)
++	{
++		if((hwcfg1 & 0x1) == 0) {
++			dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
++			in_ep_cntr ++;
++
++			/* Init EP structure */
++			ep->desc = 0;
++			ep->pcd = pcd;
++			ep->stopped = 1;
++
++			/* Init DWC ep structure */
++			ep->dwc_ep.is_in = 1;
++			ep->dwc_ep.num = i;
++			ep->dwc_ep.active = 0;
++			ep->dwc_ep.tx_fifo_num = 0;
++
++			/* Control until ep is actvated */
++			ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++			ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++			ep->dwc_ep.dma_addr = 0;
++			ep->dwc_ep.start_xfer_buff = 0;
++			ep->dwc_ep.xfer_buff = 0;
++			ep->dwc_ep.xfer_len = 0;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = 0;
++			ep->queue_sof = 0;
++			ep->dwc_ep.desc_addr = 0;
++			ep->dwc_ep.dma_desc_addr = 0;
++
++			/* Init the usb_ep structure. */
++			ep->ep.name = names[i];
++			ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
++
++			/**
++			 * @todo NGS: What should the max packet size be set to
++			 * here?  Before EP type is set?
++			 */
++			ep->ep.maxpacket = MAX_PACKET_SIZE;
++
++			list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
++
++			INIT_LIST_HEAD (&ep->queue);
++		}
++		hwcfg1 >>= 2;
++	}
++
++	out_ep_cntr = 0;
++	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
++
++	for (i = 1; out_ep_cntr < num_out_eps; i++)
++	{
++		if((hwcfg1 & 0x1) == 0) {
++			dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
++			out_ep_cntr++;
++
++			/* Init EP structure */
++			ep->desc = 0;
++			ep->pcd = pcd;
++			ep->stopped = 1;
++
++			/* Init DWC ep structure */
++			ep->dwc_ep.is_in = 0;
++			ep->dwc_ep.num = i;
++			ep->dwc_ep.active = 0;
++			ep->dwc_ep.tx_fifo_num = 0;
++			/* Control until ep is actvated */
++			ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++			ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++			ep->dwc_ep.dma_addr = 0;
++			ep->dwc_ep.start_xfer_buff = 0;
++			ep->dwc_ep.xfer_buff = 0;
++			ep->dwc_ep.xfer_len = 0;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = 0;
++			ep->queue_sof = 0;
++
++			/* Init the usb_ep structure. */
++			ep->ep.name = names[15 + i];
++			ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
++			/**
++			 * @todo NGS: What should the max packet size be set to
++			 * here?  Before EP type is set?
++			 */
++			ep->ep.maxpacket = MAX_PACKET_SIZE;
++
++			list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
++
++			INIT_LIST_HEAD (&ep->queue);
++		}
++		hwcfg1 >>= 2;
++	}
++
++	/* remove ep0 from the list.  There is a ep0 pointer.*/
++	list_del_init (&pcd->ep0.ep.ep_list);
++
++	pcd->ep0state = EP0_DISCONNECT;
++	pcd->ep0.ep.maxpacket = MAX_EP0_SIZE;
++	pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
++	pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++}
++
++/**
++ * This function releases the Gadget device.
++ * required by device_unregister().
++ *
++ * @todo Should this do something?	Should it free the PCD?
++ */
++static void dwc_otg_pcd_gadget_release(struct device *dev)
++{
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev);
++}
++
++
++
++/**
++ * This function initialized the PCD portion of the driver.
++ *
++ */
++
++int dwc_otg_pcd_init(struct device *dev)
++{
++	static char pcd_name[] = "dwc_otg_pcd";
++	dwc_otg_pcd_t *pcd;
++	dwc_otg_core_if_t* core_if;
++	dwc_otg_dev_if_t* dev_if;
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
++	int retval = 0;
++
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, dev);
++	/*
++	 * Allocate PCD structure
++	 */
++	pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL);
++
++	if (pcd == 0) {
++		return -ENOMEM;
++	}
++
++	memset(pcd, 0, sizeof(dwc_otg_pcd_t));
++	spin_lock_init(&pcd->lock);
++
++	otg_dev->pcd = pcd;
++	s_pcd = pcd;
++	pcd->gadget.name = pcd_name;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++	strcpy(pcd->gadget.dev.bus_id, "gadget");
++#else
++	dev_set_name(&pcd->gadget.dev, "%s", "gadget");
++#endif
++
++	pcd->otg_dev = dev_get_drvdata(dev);
++
++	pcd->gadget.dev.parent = dev;
++	pcd->gadget.dev.release = dwc_otg_pcd_gadget_release;
++	pcd->gadget.ops = &dwc_otg_pcd_ops;
++
++	core_if = GET_CORE_IF(pcd);
++	dev_if = core_if->dev_if;
++
++	if(core_if->hwcfg4.b.ded_fifo_en) {
++		DWC_PRINT("Dedicated Tx FIFOs mode\n");
++	}
++	else {
++		DWC_PRINT("Shared Tx FIFO mode\n");
++	}
++
++	/* If the module is set to FS or if the PHY_TYPE is FS then the gadget
++	 * should not report as dual-speed capable.	 replace the following line
++	 * with the block of code below it once the software is debugged for
++	 * this.  If is_dualspeed = 0 then the gadget driver should not report
++	 * a device qualifier descriptor when queried. */
++	if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) ||
++		((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) &&
++		 (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) &&
++		 (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) {
++		pcd->gadget.is_dualspeed = 0;
++	}
++	else {
++		pcd->gadget.is_dualspeed = 1;
++	}
++
++	if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) ||
++	(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) ||
++	(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
++	(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
++		pcd->gadget.is_otg = 0;
++	}
++	else {
++		pcd->gadget.is_otg = 1;
++	}
++
++
++	pcd->driver = 0;
++	/* Register the gadget device */
++	retval = device_register(&pcd->gadget.dev);
++	if (retval != 0) {
++		kfree (pcd);
++		return retval;
++	}
++
++
++	/*
++	 * Initialized the Core for Device mode.
++	 */
++	if (dwc_otg_is_device_mode(core_if)) {
++		dwc_otg_core_dev_init(core_if);
++	}
++
++	/*
++	 * Initialize EP structures
++	 */
++	dwc_otg_pcd_reinit(pcd);
++
++	/*
++	 * Register the PCD Callbacks.
++	 */
++	dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks,
++						pcd);
++	/*
++	 * Setup interupt handler
++	 */
++	DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", otg_dev->irq);
++	retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq,
++				IRQF_SHARED, pcd->gadget.name, pcd);
++	if (retval != 0) {
++		DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
++		device_unregister(&pcd->gadget.dev);
++		kfree (pcd);
++		return -EBUSY;
++	}
++
++	/*
++	 * Initialize the DMA buffer for SETUP packets
++	 */
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0);
++		if (pcd->setup_pkt == 0) {
++			free_irq(otg_dev->irq, pcd);
++			device_unregister(&pcd->gadget.dev);
++			kfree (pcd);
++			return -ENOMEM;
++		}
++
++		pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0);
++		if (pcd->status_buf == 0) {
++			dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++			free_irq(otg_dev->irq, pcd);
++			device_unregister(&pcd->gadget.dev);
++			kfree (pcd);
++			return -ENOMEM;
++		}
++
++		if (GET_CORE_IF(pcd)->dma_desc_enable) {
++			dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1);
++			dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1);
++			dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1);
++			dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1);
++
++			if(dev_if->setup_desc_addr[0] == 0
++			|| dev_if->setup_desc_addr[1] == 0
++			|| dev_if->in_desc_addr == 0
++			|| dev_if->out_desc_addr == 0 ) {
++
++				if(dev_if->out_desc_addr)
++					dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
++				if(dev_if->in_desc_addr)
++					dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
++				if(dev_if->setup_desc_addr[1])
++					dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
++				if(dev_if->setup_desc_addr[0])
++					dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
++
++
++				dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle);
++				dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++
++				free_irq(otg_dev->irq, pcd);
++				device_unregister(&pcd->gadget.dev);
++				kfree (pcd);
++
++				return -ENOMEM;
++			}
++		}
++	}
++	else {
++		pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL);
++		if (pcd->setup_pkt == 0) {
++			free_irq(otg_dev->irq, pcd);
++			device_unregister(&pcd->gadget.dev);
++			kfree (pcd);
++			return -ENOMEM;
++		}
++
++		pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL);
++		if (pcd->status_buf == 0) {
++			kfree(pcd->setup_pkt);
++			free_irq(otg_dev->irq, pcd);
++			device_unregister(&pcd->gadget.dev);
++			kfree (pcd);
++			return -ENOMEM;
++		}
++	}
++
++
++	/* Initialize tasklet */
++	start_xfer_tasklet.data = (unsigned long)pcd;
++	pcd->start_xfer_tasklet = &start_xfer_tasklet;
++
++	return 0;
++}
++
++/**
++ * Cleanup the PCD.
++ */
++void dwc_otg_pcd_remove(struct device *dev)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
++	dwc_otg_pcd_t *pcd = otg_dev->pcd;
++	dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev);
++
++	/*
++	 * Free the IRQ
++	 */
++	free_irq(otg_dev->irq, pcd);
++
++	 /* start with the driver above us */
++	if (pcd->driver) {
++		/* should have been done already by driver model core */
++		DWC_WARN("driver '%s' is still registered\n",
++				 pcd->driver->driver.name);
++		usb_gadget_unregister_driver(pcd->driver);
++	}
++	device_unregister(&pcd->gadget.dev);
++
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++		dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle);
++		if (GET_CORE_IF(pcd)->dma_desc_enable) {
++			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
++			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
++			dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
++			dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
++		}
++	}
++	else {
++		kfree (pcd->setup_pkt);
++		kfree (pcd->status_buf);
++	}
++
++	kfree(pcd);
++	otg_dev->pcd = 0;
++}
++
++/**
++ * This function registers a gadget driver with the PCD.
++ *
++ * When a driver is successfully registered, it will receive control
++ * requests including set_configuration(), which enables non-control
++ * requests.  then usb traffic follows until a disconnect is reported.
++ * then a host may connect again, or the driver might get unbound.
++ *
++ * @param driver The driver being registered
++ */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
++int usb_gadget_probe_driver(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *))
++#else
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++#endif
++{
++	int retval;
++	int (*d_bind)(struct usb_gadget *);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
++	d_bind = bind;
++#else
++	d_bind = driver->bind;
++#endif
++
++	DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", driver->driver.name);
++
++	if (!driver || driver->speed == USB_SPEED_UNKNOWN ||
++		!d_bind ||
++		!driver->unbind ||
++		!driver->disconnect ||
++		!driver->setup) {
++		DWC_DEBUGPL(DBG_PCDV,"EINVAL\n");
++		return -EINVAL;
++	}
++	if (s_pcd == 0) {
++		DWC_DEBUGPL(DBG_PCDV,"ENODEV\n");
++		return -ENODEV;
++	}
++	if (s_pcd->driver != 0) {
++		DWC_DEBUGPL(DBG_PCDV,"EBUSY (%p)\n", s_pcd->driver);
++		return -EBUSY;
++	}
++
++	/* hook up the driver */
++	s_pcd->driver = driver;
++	s_pcd->gadget.dev.driver = &driver->driver;
++
++	DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name);
++	retval = d_bind(&s_pcd->gadget);
++	if (retval) {
++		DWC_ERROR("bind to driver %s --> error %d\n",
++					driver->driver.name, retval);
++		s_pcd->driver = 0;
++		s_pcd->gadget.dev.driver = 0;
++		return retval;
++	}
++	DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n",
++					driver->driver.name);
++	return 0;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
++EXPORT_SYMBOL(usb_gadget_probe_driver);
++#else
++EXPORT_SYMBOL(usb_gadget_register_driver);
++#endif
++
++/**
++ * This function unregisters a gadget driver
++ *
++ * @param driver The driver being unregistered
++ */
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++	//DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver);
++
++	if (s_pcd == 0) {
++		DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__,
++				-ENODEV);
++		return -ENODEV;
++	}
++	if (driver == 0 || driver != s_pcd->driver) {
++		DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__,
++				-EINVAL);
++		return -EINVAL;
++	}
++
++	driver->unbind(&s_pcd->gadget);
++	s_pcd->driver = 0;
++
++	DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n",
++			driver->driver.name);
++	return 0;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++#endif /* DWC_HOST_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_pcd.h
+@@ -0,0 +1,248 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1103515 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++#if !defined(__DWC_PCD_H__)
++#define __DWC_PCD_H__
++
++#include <linux/types.h>
++#include <linux/list.h>
++#include <linux/errno.h>
++#include <linux/device.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++#include <linux/usb/gadget.h>
++#else
++#include <linux/usb_gadget.h>
++#endif
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++
++struct dwc_otg_device;
++
++#include "dwc_otg_cil.h"
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Perpherial Contoller Driver (PCD).
++ *
++ * The Peripheral Controller Driver (PCD) for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used.	 For
++ * the Mass Storage Function driver the File-backed USB Storage Gadget
++ * (FBS) driver will be used.  The FBS driver supports the
++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
++ * transports.
++ *
++ */
++
++/** Invalid DMA Address */
++#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
++/** Maxpacket size for EP0 */
++#define MAX_EP0_SIZE	64
++/** Maxpacket size for any EP */
++#define MAX_PACKET_SIZE 1024
++
++/** Max Transfer size for any EP */
++#define MAX_TRANSFER_SIZE 65535
++
++/** Max DMA Descriptor count for any EP */
++#define MAX_DMA_DESC_CNT 64
++
++/**
++ * Get the pointer to the core_if from the pcd pointer.
++ */
++#define GET_CORE_IF( _pcd ) (_pcd->otg_dev->core_if)
++
++/**
++ * States of EP0.
++ */
++typedef enum ep0_state
++{
++	EP0_DISCONNECT,		/* no host */
++	EP0_IDLE,
++	EP0_IN_DATA_PHASE,
++	EP0_OUT_DATA_PHASE,
++	EP0_IN_STATUS_PHASE,
++	EP0_OUT_STATUS_PHASE,
++	EP0_STALL,
++} ep0state_e;
++
++/** Fordward declaration.*/
++struct dwc_otg_pcd;
++
++/** DWC_otg iso request structure.
++ *
++ */
++typedef struct usb_iso_request  dwc_otg_pcd_iso_request_t;
++
++/**	  PCD EP structure.
++ * This structure describes an EP, there is an array of EPs in the PCD
++ * structure.
++ */
++typedef struct dwc_otg_pcd_ep
++{
++	/** USB EP data */
++	struct usb_ep		ep;
++	/** USB EP Descriptor */
++	const struct usb_endpoint_descriptor	*desc;
++
++	/** queue of dwc_otg_pcd_requests. */
++	struct list_head	queue;
++	unsigned stopped : 1;
++	unsigned disabling : 1;
++	unsigned dma : 1;
++	unsigned queue_sof : 1;
++
++#ifdef DWC_EN_ISOC
++	/** DWC_otg Isochronous Transfer */
++	struct usb_iso_request* iso_req;
++#endif //DWC_EN_ISOC
++
++	/** DWC_otg ep data. */
++	dwc_ep_t dwc_ep;
++
++	/** Pointer to PCD */
++	struct dwc_otg_pcd *pcd;
++}dwc_otg_pcd_ep_t;
++
++
++
++/** DWC_otg PCD Structure.
++ * This structure encapsulates the data for the dwc_otg PCD.
++ */
++typedef struct dwc_otg_pcd
++{
++	/** USB gadget */
++	struct usb_gadget gadget;
++	/** USB gadget driver pointer*/
++	struct usb_gadget_driver *driver;
++	/** The DWC otg device pointer. */
++	struct dwc_otg_device *otg_dev;
++
++	/** State of EP0 */
++	ep0state_e	ep0state;
++	/** EP0 Request is pending */
++	unsigned	ep0_pending : 1;
++	/** Indicates when SET CONFIGURATION Request is in process */
++	unsigned	request_config : 1;
++	/** The state of the Remote Wakeup Enable. */
++	unsigned	remote_wakeup_enable : 1;
++	/** The state of the B-Device HNP Enable. */
++	unsigned	b_hnp_enable : 1;
++	/** The state of A-Device HNP Support. */
++	unsigned	a_hnp_support : 1;
++	/** The state of the A-Device Alt HNP support. */
++	unsigned	a_alt_hnp_support : 1;
++	/** Count of pending Requests */
++	unsigned	request_pending;
++
++		/** SETUP packet for EP0
++	 * This structure is allocated as a DMA buffer on PCD initialization
++	 * with enough space for up to 3 setup packets.
++	 */
++	union
++	{
++			struct usb_ctrlrequest	req;
++			uint32_t	d32[2];
++	} *setup_pkt;
++
++	dma_addr_t setup_pkt_dma_handle;
++
++	/** 2-byte dma buffer used to return status from GET_STATUS */
++	uint16_t *status_buf;
++	dma_addr_t status_buf_dma_handle;
++
++	/** EP0 */
++	dwc_otg_pcd_ep_t ep0;
++
++	/** Array of IN EPs. */
++	dwc_otg_pcd_ep_t in_ep[ MAX_EPS_CHANNELS - 1];
++	/** Array of OUT EPs. */
++	dwc_otg_pcd_ep_t out_ep[ MAX_EPS_CHANNELS - 1];
++	/** number of valid EPs in the above array. */
++//	  unsigned	num_eps : 4;
++	spinlock_t	lock;
++	/** Timer for SRP.	If it expires before SRP is successful
++	 * clear the SRP. */
++	struct timer_list srp_timer;
++
++	/** Tasklet to defer starting of TEST mode transmissions until
++	 *	Status Phase has been completed.
++	 */
++	struct tasklet_struct test_mode_tasklet;
++
++	/** Tasklet to delay starting of xfer in DMA mode */
++	struct tasklet_struct *start_xfer_tasklet;
++
++	/** The test mode to enter when the tasklet is executed. */
++	unsigned test_mode;
++
++} dwc_otg_pcd_t;
++
++
++/** DWC_otg request structure.
++ * This structure is a list of requests.
++ */
++typedef struct
++{
++	struct usb_request	req; /**< USB Request. */
++	struct list_head	queue;	/**< queue of these requests. */
++} dwc_otg_pcd_request_t;
++
++
++extern int dwc_otg_pcd_init(struct device *dev);
++
++//extern void dwc_otg_pcd_remove( struct dwc_otg_device *_otg_dev );
++extern void dwc_otg_pcd_remove( struct device *dev);
++extern int32_t dwc_otg_pcd_handle_intr( dwc_otg_pcd_t *pcd );
++extern void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd );
++
++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd);
++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set);
++
++extern void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req);
++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t *_ep, dwc_otg_pcd_request_t *req,
++				int status);
++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *_ep);
++extern void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *_pcd,
++					const unsigned reset);
++
++#endif
++#endif /* DWC_HOST_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
+@@ -0,0 +1,3654 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1115682 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_pcd.h"
++
++
++#define DEBUG_EP0
++
++/* request functions defined in "dwc_otg_pcd.c" */
++
++/** @file
++ * This file contains the implementation of the PCD Interrupt handlers.
++ *
++ * The PCD handles the device interrupts.  Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ * All interrupt registers are processed from LSB to MSB.
++ */
++
++
++/**
++ * This function prints the ep0 state for debug purposes.
++ */
++static inline void print_ep0_state(dwc_otg_pcd_t *pcd)
++{
++#ifdef DEBUG
++	char str[40];
++
++	switch (pcd->ep0state) {
++	case EP0_DISCONNECT:
++		strcpy(str, "EP0_DISCONNECT");
++		break;
++	case EP0_IDLE:
++		strcpy(str, "EP0_IDLE");
++		break;
++	case EP0_IN_DATA_PHASE:
++		strcpy(str, "EP0_IN_DATA_PHASE");
++		break;
++	case EP0_OUT_DATA_PHASE:
++		strcpy(str, "EP0_OUT_DATA_PHASE");
++		break;
++	case EP0_IN_STATUS_PHASE:
++		strcpy(str,"EP0_IN_STATUS_PHASE");
++		break;
++	case EP0_OUT_STATUS_PHASE:
++		strcpy(str,"EP0_OUT_STATUS_PHASE");
++		break;
++	case EP0_STALL:
++		strcpy(str,"EP0_STALL");
++		break;
++	default:
++		strcpy(str,"EP0_INVALID");
++	}
++
++	DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
++#endif
++}
++
++/**
++ * This function returns pointer to in ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t* get_in_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
++{
++	int i;
++	int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++	if(ep_num == 0) {
++		return &pcd->ep0;
++	}
++	else {
++		for(i = 0; i < num_in_eps; ++i)
++		{
++			if(pcd->in_ep[i].dwc_ep.num == ep_num)
++				return &pcd->in_ep[i];
++		}
++		return 0;
++	}
++}
++/**
++ * This function returns pointer to out ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t* get_out_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
++{
++	int i;
++	int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++	if(ep_num == 0) {
++		return &pcd->ep0;
++	}
++	else {
++		for(i = 0; i < num_out_eps; ++i)
++		{
++			if(pcd->out_ep[i].dwc_ep.num == ep_num)
++				return &pcd->out_ep[i];
++		}
++		return 0;
++	}
++}
++/**
++ * This functions gets a pointer to an EP from the wIndex address
++ * value of the control request.
++ */
++static dwc_otg_pcd_ep_t *get_ep_by_addr (dwc_otg_pcd_t *pcd, u16 wIndex)
++{
++	dwc_otg_pcd_ep_t	*ep;
++
++	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
++		return &pcd->ep0;
++	list_for_each_entry(ep, &pcd->gadget.ep_list, ep.ep_list)
++	{
++		u8	bEndpointAddress;
++
++		if (!ep->desc)
++			continue;
++
++		bEndpointAddress = ep->desc->bEndpointAddress;
++		if((wIndex & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK))
++			== (bEndpointAddress & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK)))
++			return ep;
++	}
++	return NULL;
++}
++
++/**
++ * This function checks the EP request queue, if the queue is not
++ * empty the next request is started.
++ */
++void start_next_request(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_otg_pcd_request_t *req = 0;
++	uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
++
++	if (!list_empty(&ep->queue)) {
++		req = list_entry(ep->queue.next,
++			   dwc_otg_pcd_request_t, queue);
++
++		/* Setup and start the Transfer */
++		ep->dwc_ep.dma_addr = req->req.dma;
++		ep->dwc_ep.start_xfer_buff = req->req.buf;
++		ep->dwc_ep.xfer_buff = req->req.buf;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = req->req.length;
++		ep->dwc_ep.xfer_len = 0;
++		ep->dwc_ep.xfer_count = 0;
++
++		if(max_transfer > MAX_TRANSFER_SIZE) {
++			ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
++		} else {
++			ep->dwc_ep.maxxfer = max_transfer;
++		}
++
++		if(req->req.zero) {
++			if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
++					&& (ep->dwc_ep.total_len != 0)) {
++				ep->dwc_ep.sent_zlp = 1;
++			}
++
++		}
++
++		dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
++	}
++}
++
++/**
++ * This function handles the SOF Interrupts. At this time the SOF
++ * Interrupt is disabled.
++ */
++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_PCD, "SOF\n");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.sofintr = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++
++/**
++ * This function handles the Rx Status Queue Level Interrupt, which
++ * indicates that there is a least one packet in the Rx FIFO.  The
++ * packets are moved from the FIFO to memory, where they will be
++ * processed when the Endpoint Interrupt Register indicates Transfer
++ * Complete or SETUP Phase Done.
++ *
++ * Repeat the following until the Rx Status Queue is empty:
++ *	 -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
++ *		info
++ *	 -# If Receive FIFO is empty then skip to step Clear the interrupt
++ *		and exit
++ *	 -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
++ *		SETUP data to the buffer
++ *	 -# If OUT Data Packet call dwc_otg_read_packet to copy the data
++ *		to the destination buffer
++ */
++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t gintmask = {.d32=0};
++	device_grxsts_data_t status;
++	dwc_otg_pcd_ep_t *ep;
++	gintsts_data_t gintsts;
++#ifdef DEBUG
++	static char *dpid_str[] ={ "D0", "D2", "D1", "MDATA" };
++#endif
++
++	//DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
++	/* Disable the Rx Status Queue Level interrupt */
++	gintmask.b.rxstsqlvl= 1;
++	dwc_modify_reg32(&global_regs->gintmsk, gintmask.d32, 0);
++
++	/* Get the Status from the top of the FIFO */
++	status.d32 = dwc_read_reg32(&global_regs->grxstsp);
++
++	DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
++					"pktsts:%x Frame:%d(0x%0x)\n",
++					status.b.epnum, status.b.bcnt,
++					dpid_str[status.b.dpid],
++					status.b.pktsts, status.b.fn, status.b.fn);
++	/* Get pointer to EP structure */
++	ep = get_out_ep(pcd, status.b.epnum);
++
++	switch (status.b.pktsts) {
++	case DWC_DSTS_GOUT_NAK:
++		DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
++		break;
++	case DWC_STS_DATA_UPDT:
++		DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
++		if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
++			/** @todo NGS Check for buffer overflow? */
++			dwc_otg_read_packet(core_if,
++						 ep->dwc_ep.xfer_buff,
++						 status.b.bcnt);
++			ep->dwc_ep.xfer_count += status.b.bcnt;
++			ep->dwc_ep.xfer_buff += status.b.bcnt;
++		}
++		break;
++	case DWC_STS_XFER_COMP:
++		DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
++		break;
++	case DWC_DSTS_SETUP_COMP:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
++#endif
++		break;
++case DWC_DSTS_SETUP_UPDT:
++		dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD,
++				"SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
++				pcd->setup_pkt->req.bRequestType,
++				pcd->setup_pkt->req.bRequest,
++				pcd->setup_pkt->req.wValue,
++				pcd->setup_pkt->req.wIndex,
++				pcd->setup_pkt->req.wLength);
++#endif
++		ep->dwc_ep.xfer_count += status.b.bcnt;
++		break;
++	default:
++		DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
++				status.b.pktsts);
++		break;
++	}
++
++	/* Enable the Rx Status Queue Level interrupt */
++	dwc_modify_reg32(&global_regs->gintmsk, 0, gintmask.d32);
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
++
++	//DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
++	return 1;
++}
++/**
++ * This function examines the Device IN Token Learning Queue to
++ * determine the EP number of the last IN token received.  This
++ * implementation is for the Mass Storage device where there are only
++ * 2 IN EPs (Control-IN and BULK-IN).
++ *
++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
++ * are 8 EP Numbers in each of the other possible DTKNQ Registers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ *
++ */
++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_device_global_regs_t *dev_global_regs =
++			core_if->dev_if->dev_global_regs;
++	const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
++	/* Number of Token Queue Registers */
++	const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
++	dtknq1_data_t dtknqr1;
++	uint32_t in_tkn_epnums[4];
++	int ndx = 0;
++	int i = 0;
++	volatile uint32_t *addr = &dev_global_regs->dtknqr1;
++	int epnum = 0;
++
++	//DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
++
++
++	/* Read the DTKNQ Registers */
++	for (i = 0; i < DTKNQ_REG_CNT; i++)
++	{
++		in_tkn_epnums[ i ] = dwc_read_reg32(addr);
++		DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i+1,
++				in_tkn_epnums[i]);
++		if (addr == &dev_global_regs->dvbusdis) {
++			addr = &dev_global_regs->dtknqr3_dthrctl;
++		}
++		else {
++			++addr;
++		}
++
++	}
++
++	/* Copy the DTKNQR1 data to the bit field. */
++	dtknqr1.d32 = in_tkn_epnums[0];
++	/* Get the EP numbers */
++	in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
++	ndx = dtknqr1.b.intknwptr - 1;
++
++	//DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
++	if (ndx == -1) {
++		/** @todo Find a simpler way to calculate the max
++		 * queue position.*/
++		int cnt = TOKEN_Q_DEPTH;
++		if (TOKEN_Q_DEPTH <= 6) {
++			cnt = TOKEN_Q_DEPTH - 1;
++		}
++		else if (TOKEN_Q_DEPTH <= 14) {
++			cnt = TOKEN_Q_DEPTH - 7;
++		}
++		else if (TOKEN_Q_DEPTH <= 22) {
++			cnt = TOKEN_Q_DEPTH - 15;
++		}
++		else {
++			cnt = TOKEN_Q_DEPTH - 23;
++		}
++		epnum = (in_tkn_epnums[ DTKNQ_REG_CNT - 1 ] >> (cnt * 4)) & 0xF;
++	}
++	else {
++		if (ndx <= 5) {
++			epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
++		}
++		else if (ndx <= 13) {
++			ndx -= 6;
++			epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
++		}
++		else if (ndx <= 21) {
++			ndx -= 14;
++			epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
++		}
++		else if (ndx <= 29) {
++			ndx -= 22;
++			epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
++		}
++	}
++	//DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
++	return epnum;
++}
++
++/**
++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
++ * The active request is checked for the next packet to be loaded into
++ * the non-periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs =
++			core_if->core_global_regs;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	gnptxsts_data_t txstatus = {.d32 = 0};
++	gintsts_data_t gintsts;
++
++	int epnum = 0;
++	dwc_otg_pcd_ep_t *ep = 0;
++	uint32_t len = 0;
++	int dwords;
++
++	/* Get the epnum from the IN Token Learning Queue. */
++	epnum = get_ep_of_last_in_token(core_if);
++	ep = get_in_ep(pcd, epnum);
++
++	DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++	if (len > ep->dwc_ep.maxpacket) {
++		len = ep->dwc_ep.maxpacket;
++	}
++	dwords = (len + 3)/4;
++
++
++	/* While there is space in the queue and space in the FIFO and
++	* More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n",txstatus.d32);
++
++	while  (txstatus.b.nptxqspcavail > 0 &&
++		txstatus.b.nptxfspcavail > dwords &&
++		ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++		if (len > ep->dwc_ep.maxpacket) {
++			len = ep->dwc_ep.maxpacket;
++		}
++
++		dwords = (len + 3)/4;
++		txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_PCDV,"GNPTXSTS=0x%08x\n",txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
++			dwc_read_reg32(&global_regs->gnptxsts));
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.nptxfempty = 1;
++	dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function is called when dedicated Tx FIFO Empty interrupt occurs.
++ * The active request is checked for the next packet to be loaded into
++ * apropriate Tx FIFO.
++ */
++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t *pcd, uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t* dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0};
++	dwc_otg_pcd_ep_t *ep = 0;
++	uint32_t len = 0;
++	int dwords;
++
++	ep = get_in_ep(pcd, epnum);
++
++	DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++	if (len > ep->dwc_ep.maxpacket) {
++		len = ep->dwc_ep.maxpacket;
++	}
++
++	dwords = (len + 3)/4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,txstatus.d32);
++
++	while  (txstatus.b.txfspcavail > dwords &&
++		ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
++		ep->dwc_ep.xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++
++		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++		if (len > ep->dwc_ep.maxpacket) {
++			len = ep->dwc_ep.maxpacket;
++		}
++
++		dwords = (len + 3)/4;
++		txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts));
++
++	return 1;
++}
++
++
++/**
++ * This function is called when the Device is disconnected. It stops
++ * any active requests and informs the Gadget driver of the
++ * disconnect.
++ */
++void dwc_otg_pcd_stop(dwc_otg_pcd_t *pcd)
++{
++	int i, num_in_eps, num_out_eps;
++	dwc_otg_pcd_ep_t *ep;
++
++	gintmsk_data_t intr_mask = {.d32 = 0};
++
++	num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++	num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
++	/* don't disconnect drivers more than once */
++	if (pcd->ep0state == EP0_DISCONNECT) {
++		DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
++		return;
++	}
++	pcd->ep0state = EP0_DISCONNECT;
++
++	/* Reset the OTG state. */
++	dwc_otg_pcd_update_otg(pcd, 1);
++
++	/* Disable the NP Tx Fifo Empty Interrupt. */
++	intr_mask.b.nptxfempty = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++					 intr_mask.d32, 0);
++
++	/* Flush the FIFOs */
++	/**@todo NGS Flush Periodic FIFOs */
++	dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
++	dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
++
++	/* prevent new request submissions, kill any outstanding requests  */
++	ep = &pcd->ep0;
++	dwc_otg_request_nuke(ep);
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < num_in_eps; i++)
++	{
++		dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
++		dwc_otg_request_nuke(ep);
++	}
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < num_out_eps; i++)
++	{
++		dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
++		dwc_otg_request_nuke(ep);
++	}
++
++	/* report disconnect; the driver is already quiesced */
++	if (pcd->driver && pcd->driver->disconnect) {
++		SPIN_UNLOCK(&pcd->lock);
++		pcd->driver->disconnect(&pcd->gadget);
++		SPIN_LOCK(&pcd->lock);
++	}
++}
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t *pcd)
++{
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	gintsts_data_t gintsts;
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "i2cintr");
++	intr_mask.b.i2cintr = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++				intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.i2cintr = 1;
++	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++						 gintsts.d32);
++	return 1;
++}
++
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t *pcd)
++{
++	gintsts_data_t gintsts;
++#if defined(VERBOSE)
++	DWC_PRINT("Early Suspend Detected\n");
++#endif
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.erlysuspend = 1;
++	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++				gintsts.d32);
++	return 1;
++}
++
++/**
++ * This function configures EPO to receive SETUP packets.
++ *
++ * @todo NGS: Update the comments from the HW FS.
++ *
++ *	-# Program the following fields in the endpoint specific registers
++ *	for Control OUT EP 0, in order to receive a setup packet
++ *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ *	  setup packets)
++ *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ *	  to back setup packets)
++ *		- In DMA mode, DOEPDMA0 Register with a memory address to
++ *		  store any setup packets received
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param pcd	  Programming view of the PCD.
++ */
++static inline void ep0_out_start(dwc_otg_core_if_t *core_if, dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	deptsiz0_data_t doeptsize0 = { .d32 = 0};
++	dwc_otg_dma_desc_t* dma_desc;
++	depctl_data_t doepctl = { .d32 = 0 };
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV,"%s() doepctl0=%0x\n", __func__,
++				dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++#endif
++
++	doeptsize0.b.supcnt = 3;
++	doeptsize0.b.pktcnt = 1;
++	doeptsize0.b.xfersize = 8*3;
++
++
++	if (core_if->dma_enable) {
++		if (!core_if->dma_desc_enable) {
++			/** put here as for Hermes mode deptisz register should not be written */
++			dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
++			 doeptsize0.d32);
++
++			/** @todo dma needs to handle multiple setup packets (up to 3) */
++			dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma,
++			pcd->setup_pkt_dma_handle);
++		} else {
++			dev_if->setup_desc_index = (dev_if->setup_desc_index + 1) & 1;
++			dma_desc = dev_if->setup_desc_addr[dev_if->setup_desc_index];
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
++			dma_desc->buf = pcd->setup_pkt_dma_handle;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++			dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]);
++		}
++
++	} else {
++		/** put here as for Hermes mode deptisz register should not be written */
++		dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
++					 doeptsize0.d32);
++	}
++
++	/** DOEPCTL0 Register write */
++	doepctl.b.epena = 1;
++	doepctl.b.cnak = 1;
++	dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
++				dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++	DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
++				dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++}
++
++
++/**
++ * This interrupt occurs when a USB Reset is detected.	When the USB
++ * Reset Interrupt occurs the device state is set to DEFAULT and the
++ * EP0 state is set to IDLE.
++ *	-#	Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
++ *	-#	Unmask the following interrupt bits
++ *		- DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
++ *	- DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
++ *	- DOEPMSK.SETUP = 1
++ *	- DOEPMSK.XferCompl = 1
++ *	- DIEPMSK.XferCompl = 1
++ *	- DIEPMSK.TimeOut = 1
++ *	-# Program the following fields in the endpoint specific registers
++ *	for Control OUT EP 0, in order to receive a setup packet
++ *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ *	  setup packets)
++ *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ *	  to back setup packets)
++ *		- In DMA mode, DOEPDMA0 Register with a memory address to
++ *		  store any setup packets received
++ * At this point, all the required initialization, except for enabling
++ * the control 0 OUT endpoint is done, for receiving SETUP packets.
++ */
++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	depctl_data_t doepctl = { .d32 = 0};
++
++	daint_data_t daintmsk = { .d32 = 0};
++	doepmsk_data_t doepmsk = { .d32 = 0};
++	diepmsk_data_t diepmsk = { .d32 = 0};
++
++	dcfg_data_t dcfg = { .d32=0 };
++	grstctl_t resetctl = { .d32=0 };
++	dctl_data_t dctl = {.d32=0};
++	int i = 0;
++	gintsts_data_t gintsts;
++
++	DWC_PRINT("USB RESET\n");
++#ifdef DWC_EN_ISOC
++	for(i = 1;i < 16; ++i)
++	{
++		dwc_otg_pcd_ep_t *ep;
++		dwc_ep_t *dwc_ep;
++		ep = get_in_ep(pcd,i);
++		if(ep != 0){
++			dwc_ep = &ep->dwc_ep;
++			dwc_ep->next_frame = 0xffffffff;
++		}
++	}
++#endif /* DWC_EN_ISOC  */
++
++	/* reset the HNP settings */
++	dwc_otg_pcd_update_otg(pcd, 1);
++
++	/* Clear the Remote Wakeup Signalling */
++	dctl.b.rmtwkupsig = 1;
++	dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
++					  dctl.d32, 0);
++
++	/* Set NAK for all OUT EPs */
++	doepctl.b.snak = 1;
++	for (i=0; i <= dev_if->num_out_eps; i++)
++	{
++		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl,
++						 doepctl.d32);
++	}
++
++	/* Flush the NP Tx FIFO */
++	dwc_otg_flush_tx_fifo(core_if, 0x10);
++	/* Flush the Learning Queue */
++	resetctl.b.intknqflsh = 1;
++	dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++	if(core_if->multiproc_int_enable) {
++		daintmsk.b.inep0 = 1;
++		daintmsk.b.outep0 = 1;
++		dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, daintmsk.d32);
++
++		doepmsk.b.setup = 1;
++		doepmsk.b.xfercompl = 1;
++		doepmsk.b.ahberr = 1;
++		doepmsk.b.epdisabled = 1;
++
++		if(core_if->dma_desc_enable) {
++			doepmsk.b.stsphsercvd = 1;
++			doepmsk.b.bna = 1;
++		}
++/*
++		doepmsk.b.babble = 1;
++		doepmsk.b.nyet = 1;
++
++		if(core_if->dma_enable) {
++			doepmsk.b.nak = 1;
++		}
++*/
++		dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[0], doepmsk.d32);
++
++		diepmsk.b.xfercompl = 1;
++		diepmsk.b.timeout = 1;
++		diepmsk.b.epdisabled = 1;
++		diepmsk.b.ahberr = 1;
++		diepmsk.b.intknepmis = 1;
++
++		if(core_if->dma_desc_enable) {
++			diepmsk.b.bna = 1;
++		}
++/*
++		if(core_if->dma_enable) {
++			diepmsk.b.nak = 1;
++		}
++*/
++		dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], diepmsk.d32);
++	} else{
++		daintmsk.b.inep0 = 1;
++		daintmsk.b.outep0 = 1;
++		dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, daintmsk.d32);
++
++		doepmsk.b.setup = 1;
++		doepmsk.b.xfercompl = 1;
++		doepmsk.b.ahberr = 1;
++		doepmsk.b.epdisabled = 1;
++
++		if(core_if->dma_desc_enable) {
++			doepmsk.b.stsphsercvd = 1;
++			doepmsk.b.bna = 1;
++		}
++/*
++		doepmsk.b.babble = 1;
++		doepmsk.b.nyet = 1;
++		doepmsk.b.nak = 1;
++*/
++		dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
++
++		diepmsk.b.xfercompl = 1;
++		diepmsk.b.timeout = 1;
++		diepmsk.b.epdisabled = 1;
++		diepmsk.b.ahberr = 1;
++		diepmsk.b.intknepmis = 1;
++
++		if(core_if->dma_desc_enable) {
++			diepmsk.b.bna = 1;
++		}
++
++//		diepmsk.b.nak = 1;
++
++		dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
++	}
++
++	/* Reset Device Address */
++	dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
++	dcfg.b.devaddr = 0;
++	dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++	/* setup EP0 to receive SETUP packets */
++	ep0_out_start(core_if, pcd);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbreset = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * Get the device speed from the device status register and convert it
++ * to USB speed constant.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static int get_device_speed(dwc_otg_core_if_t *core_if)
++{
++	dsts_data_t dsts;
++	enum usb_device_speed speed = USB_SPEED_UNKNOWN;
++	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++		speed = USB_SPEED_HIGH;
++		break;
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		speed = USB_SPEED_FULL;
++		break;
++
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		speed = USB_SPEED_LOW;
++		break;
++	}
++
++	return speed;
++}
++
++/**
++ * Read the device status register and set the device speed in the
++ * data structure.
++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
++ */
++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	gintsts_data_t gintsts;
++	gusbcfg_data_t gusbcfg;
++	dwc_otg_core_global_regs_t *global_regs =
++		GET_CORE_IF(pcd)->core_global_regs;
++	uint8_t utmi16b, utmi8b;
++	DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
++
++	if (GET_CORE_IF(pcd)->snpsid >= 0x4F54260A) {
++		utmi16b = 6;
++		utmi8b = 9;
++	} else {
++		utmi16b = 4;
++		utmi8b = 8;
++	}
++	dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++#ifdef DEBUG_EP0
++	print_ep0_state(pcd);
++#endif
++
++	if (pcd->ep0state == EP0_DISCONNECT) {
++		pcd->ep0state = EP0_IDLE;
++	}
++	else if (pcd->ep0state == EP0_STALL) {
++		pcd->ep0state = EP0_IDLE;
++	}
++
++	pcd->ep0state = EP0_IDLE;
++
++	ep0->stopped = 0;
++
++	pcd->gadget.speed = get_device_speed(GET_CORE_IF(pcd));
++
++	/* Set USB turnaround time based on device speed and PHY interface. */
++	gusbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++	if (pcd->gadget.speed == USB_SPEED_HIGH) {
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
++			/* ULPI interface */
++			gusbcfg.b.usbtrdtim = 9;
++		}
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
++			/* UTMI+ interface */
++			if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
++				gusbcfg.b.usbtrdtim = utmi8b;
++			}
++			else if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 1) {
++				gusbcfg.b.usbtrdtim = utmi16b;
++			}
++			else if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 8) {
++				gusbcfg.b.usbtrdtim = utmi8b;
++			}
++			else {
++				gusbcfg.b.usbtrdtim = utmi16b;
++			}
++		}
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
++			/* UTMI+  OR  ULPI interface */
++			if (gusbcfg.b.ulpi_utmi_sel == 1) {
++				/* ULPI interface */
++				gusbcfg.b.usbtrdtim = 9;
++			}
++			else {
++				/* UTMI+ interface */
++				if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 16) {
++					gusbcfg.b.usbtrdtim = utmi16b;
++				}
++				else {
++					gusbcfg.b.usbtrdtim = utmi8b;
++				}
++			}
++		}
++	}
++	else {
++		/* Full or low speed */
++		gusbcfg.b.usbtrdtim = 9;
++	}
++	dwc_write_reg32(&global_regs->gusbcfg, gusbcfg.d32);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.enumdone = 1;
++	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			 gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the ISO OUT Packet was dropped due to
++ * Rx FIFO full or Rx Status Queue Full.  If this interrupt occurs
++ * read all the data from the Rx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t *pcd)
++{
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	gintsts_data_t gintsts;
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++			  "ISOC Out Dropped");
++
++	intr_mask.b.isooutdrop = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			  intr_mask.d32, 0);
++
++	/* Clear interrupt */
++
++	gintsts.d32 = 0;
++	gintsts.b.isooutdrop = 1;
++	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			 gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates the end of the portion of the micro-frame
++ * for periodic transactions.  If there is a periodic transaction for
++ * the next frame, load the packets into the EP periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t *pcd)
++{
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	gintsts_data_t gintsts;
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "EOP");
++
++	intr_mask.b.eopframe = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++					  intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.eopframe = 1;
++	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that EP of the packet on the top of the
++ * non-periodic Tx FIFO does not match EP of the IN Token received.
++ *
++ * The "Device IN Token Queue" Registers are read to determine the
++ * order the IN Tokens have been received.	The non-periodic Tx FIFO
++ * is flushed, so it can be reloaded in the order seen in the IN Token
++ * Queue.
++ */
++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_core_if_t *core_if)
++{
++	gintsts_data_t gintsts;
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.epmismatch = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This funcion stalls EP0.
++ */
++static inline void ep0_do_stall(dwc_otg_pcd_t *pcd, const int err_val)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	struct usb_ctrlrequest	*ctrl = &pcd->setup_pkt->req;
++	DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
++			 ctrl->bRequestType, ctrl->bRequest, err_val);
++
++	ep0->dwc_ep.is_in = 1;
++	dwc_otg_ep_set_stall(pcd->otg_dev->core_if, &ep0->dwc_ep);
++	pcd->ep0.stopped = 1;
++	pcd->ep0state = EP0_IDLE;
++	ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This functions delegates the setup command to the gadget driver.
++ */
++static inline void do_gadget_setup(dwc_otg_pcd_t *pcd,
++					struct usb_ctrlrequest * ctrl)
++{
++	int ret = 0;
++	if (pcd->driver && pcd->driver->setup) {
++		SPIN_UNLOCK(&pcd->lock);
++		ret = pcd->driver->setup(&pcd->gadget, ctrl);
++		SPIN_LOCK(&pcd->lock);
++		if (ret < 0) {
++			ep0_do_stall(pcd, ret);
++		}
++
++		/** @todo This is a g_file_storage gadget driver specific
++		 * workaround: a DELAYED_STATUS result from the fsg_setup
++		 * routine will result in the gadget queueing a EP0 IN status
++		 * phase for a two-stage control transfer.	Exactly the same as
++		 * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
++		 * specific request.  Need a generic way to know when the gadget
++		 * driver will queue the status phase.	Can we assume when we
++		 * call the gadget driver setup() function that it will always
++		 * queue and require the following flag?  Need to look into
++		 * this.
++		 */
++
++		if (ret == 256 + 999) {
++			pcd->request_config = 1;
++		}
++	}
++}
++
++/**
++ * This function starts the Zero-Length Packet for the IN status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_in_status_phase(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	if (pcd->ep0state == EP0_STALL) {
++		return;
++	}
++
++	pcd->ep0state = EP0_IN_STATUS_PHASE;
++
++	/* Prepare for more SETUP Packets */
++	DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
++	ep0->dwc_ep.xfer_len = 0;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.is_in = 1;
++	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++	/* Prepare for more SETUP Packets */
++//	if(GET_CORE_IF(pcd)->dma_enable == 0) ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This function starts the Zero-Length Packet for the OUT status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_out_status_phase(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	if (pcd->ep0state == EP0_STALL) {
++		DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
++		return;
++	}
++	pcd->ep0state = EP0_OUT_STATUS_PHASE;
++
++	DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
++	ep0->dwc_ep.xfer_len = 0;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.is_in = 0;
++	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++	/* Prepare for more SETUP Packets */
++	if(GET_CORE_IF(pcd)->dma_enable == 0) {
++			ep0_out_start(GET_CORE_IF(pcd), pcd);
++	}
++}
++
++/**
++ * Clear the EP halt (STALL) and if pending requests start the
++ * transfer.
++ */
++static inline void pcd_clear_halt(dwc_otg_pcd_t *pcd, dwc_otg_pcd_ep_t *ep)
++{
++	if(ep->dwc_ep.stall_clear_flag == 0)
++		dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++
++	/* Reactive the EP */
++	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++	if (ep->stopped) {
++		ep->stopped = 0;
++		/* If there is a request in the EP queue start it */
++
++		/** @todo FIXME: this causes an EP mismatch in DMA mode.
++		 * epmismatch not yet implemented. */
++
++		/*
++		 * Above fixme is solved by implmenting a tasklet to call the
++		 * start_next_request(), outside of interrupt context at some
++		 * time after the current time, after a clear-halt setup packet.
++		 * Still need to implement ep mismatch in the future if a gadget
++		 * ever uses more than one endpoint at once
++		 */
++		ep->queue_sof = 1;
++		tasklet_schedule (pcd->start_xfer_tasklet);
++	}
++	/* Start Control Status Phase */
++	do_setup_in_status_phase(pcd);
++}
++
++/**
++ * This function is called when the SET_FEATURE TEST_MODE Setup packet
++ * is sent from the host.  The Device Control register is written with
++ * the Test Mode bits set to the specified Test Mode.  This is done as
++ * a tasklet so that the "Status" phase of the control transfer
++ * completes before transmitting the TEST packets.
++ *
++ * @todo This has not been tested since the tasklet struct was put
++ * into the PCD struct!
++ *
++ */
++static void do_test_mode(unsigned long data)
++{
++	dctl_data_t		dctl;
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)data;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	int test_mode = pcd->test_mode;
++
++
++//	  DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
++
++	dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
++	switch (test_mode) {
++	case 1: // TEST_J
++		dctl.b.tstctl = 1;
++		break;
++
++	case 2: // TEST_K
++		dctl.b.tstctl = 2;
++		break;
++
++	case 3: // TEST_SE0_NAK
++		dctl.b.tstctl = 3;
++		break;
++
++	case 4: // TEST_PACKET
++		dctl.b.tstctl = 4;
++		break;
++
++	case 5: // TEST_FORCE_ENABLE
++		dctl.b.tstctl = 5;
++		break;
++	}
++	dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++}
++
++/**
++ * This function process the GET_STATUS Setup Commands.
++ */
++static inline void do_get_status(dwc_otg_pcd_t *pcd)
++{
++	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t	*ep;
++	dwc_otg_pcd_ep_t	*ep0 = &pcd->ep0;
++	uint16_t		*status = pcd->status_buf;
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCD,
++			"GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
++			ctrl.bRequestType, ctrl.bRequest,
++			ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++#endif
++
++	switch (ctrl.bRequestType & USB_RECIP_MASK) {
++	case USB_RECIP_DEVICE:
++		*status = 0x1; /* Self powered */
++		*status |= pcd->remote_wakeup_enable << 1;
++		break;
++
++	case USB_RECIP_INTERFACE:
++		*status = 0;
++		break;
++
++	case USB_RECIP_ENDPOINT:
++		ep = get_ep_by_addr(pcd, ctrl.wIndex);
++		if (ep == 0 || ctrl.wLength > 2) {
++			ep0_do_stall(pcd, -EOPNOTSUPP);
++			return;
++		}
++		/** @todo check for EP stall */
++		*status = ep->stopped;
++		break;
++	}
++	pcd->ep0_pending = 1;
++	ep0->dwc_ep.start_xfer_buff = (uint8_t *)status;
++	ep0->dwc_ep.xfer_buff = (uint8_t *)status;
++	ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
++	ep0->dwc_ep.xfer_len = 2;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++}
++/**
++ * This function process the SET_FEATURE Setup Commands.
++ */
++static inline void do_set_feature(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs =
++			core_if->core_global_regs;
++	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t	*ep = 0;
++	int32_t otg_cap_param = core_if->core_params->otg_cap;
++	gotgctl_data_t gotgctl = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++			ctrl.bRequestType, ctrl.bRequest,
++			ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++	DWC_DEBUGPL(DBG_PCD,"otg_cap=%d\n", otg_cap_param);
++
++
++	switch (ctrl.bRequestType & USB_RECIP_MASK) {
++	case USB_RECIP_DEVICE:
++		switch (ctrl.wValue) {
++		case USB_DEVICE_REMOTE_WAKEUP:
++			pcd->remote_wakeup_enable = 1;
++			break;
++
++		case USB_DEVICE_TEST_MODE:
++			/* Setup the Test Mode tasklet to do the Test
++			 * Packet generation after the SETUP Status
++			 * phase has completed. */
++
++			/** @todo This has not been tested since the
++			 * tasklet struct was put into the PCD
++			 * struct! */
++			pcd->test_mode_tasklet.next = 0;
++			pcd->test_mode_tasklet.state = 0;
++			atomic_set(&pcd->test_mode_tasklet.count, 0);
++			pcd->test_mode_tasklet.func = do_test_mode;
++			pcd->test_mode_tasklet.data = (unsigned long)pcd;
++			pcd->test_mode = ctrl.wIndex >> 8;
++			tasklet_schedule(&pcd->test_mode_tasklet);
++			break;
++
++		case USB_DEVICE_B_HNP_ENABLE:
++			DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
++
++			/* dev may initiate HNP */
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->b_hnp_enable = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++				DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
++				/**@todo Is the gotgctl.devhnpen cleared
++				 * by a USB Reset? */
++				gotgctl.b.devhnpen = 1;
++				gotgctl.b.hnpreq = 1;
++				dwc_write_reg32(&global_regs->gotgctl, gotgctl.d32);
++			}
++			else {
++				ep0_do_stall(pcd, -EOPNOTSUPP);
++			}
++			break;
++
++		case USB_DEVICE_A_HNP_SUPPORT:
++			/* RH port supports HNP */
++			DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->a_hnp_support = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++			}
++			else {
++				ep0_do_stall(pcd, -EOPNOTSUPP);
++			}
++			break;
++
++		case USB_DEVICE_A_ALT_HNP_SUPPORT:
++			/* other RH port does */
++			DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->a_alt_hnp_support = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++			}
++			else {
++				ep0_do_stall(pcd, -EOPNOTSUPP);
++			}
++			break;
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++
++	case USB_RECIP_INTERFACE:
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	case USB_RECIP_ENDPOINT:
++		if (ctrl.wValue == USB_ENDPOINT_HALT) {
++			ep = get_ep_by_addr(pcd, ctrl.wIndex);
++			if (ep == 0) {
++				ep0_do_stall(pcd, -EOPNOTSUPP);
++				return;
++			}
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++	}
++}
++
++/**
++ * This function process the CLEAR_FEATURE Setup Commands.
++ */
++static inline void do_clear_feature(dwc_otg_pcd_t *pcd)
++{
++	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t	*ep = 0;
++
++	DWC_DEBUGPL(DBG_PCD,
++				"CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++				ctrl.bRequestType, ctrl.bRequest,
++				ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++
++	switch (ctrl.bRequestType & USB_RECIP_MASK) {
++	case USB_RECIP_DEVICE:
++		switch (ctrl.wValue) {
++		case USB_DEVICE_REMOTE_WAKEUP:
++			pcd->remote_wakeup_enable = 0;
++			break;
++
++		case USB_DEVICE_TEST_MODE:
++			/** @todo Add CLEAR_FEATURE for TEST modes. */
++			break;
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++
++	case USB_RECIP_ENDPOINT:
++		ep = get_ep_by_addr(pcd, ctrl.wIndex);
++		if (ep == 0) {
++			ep0_do_stall(pcd, -EOPNOTSUPP);
++			return;
++		}
++
++		pcd_clear_halt(pcd, ep);
++
++		break;
++	}
++}
++
++/**
++ * This function process the SET_ADDRESS Setup Commands.
++ */
++static inline void do_set_address(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
++
++	if (ctrl.bRequestType == USB_RECIP_DEVICE) {
++		dcfg_data_t dcfg = {.d32=0};
++
++#ifdef DEBUG_EP0
++//			DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
++#endif
++		dcfg.b.devaddr = ctrl.wValue;
++		dwc_modify_reg32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
++		do_setup_in_status_phase(pcd);
++	}
++}
++
++/**
++ *	This function processes SETUP commands.	 In Linux, the USB Command
++ *	processing is done in two places - the first being the PCD and the
++ *	second in the Gadget Driver (for example, the File-Backed Storage
++ *	Gadget Driver).
++ *
++ * <table>
++ * <tr><td>Command	</td><td>Driver </td><td>Description</td></tr>
++ *
++ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
++ * defined in chapter 9 of the USB 2.0 Specification chapter 9
++ * </td></tr>
++ *
++ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are the ENDPOINT_HALT feature is procesed, all others the
++ * interface requests are ignored.</td></tr>
++ *
++ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are processed by the PCD.  Interface requests are passed
++ * to the Gadget Driver.</td></tr>
++ *
++ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
++ * with device address received </td></tr>
++ *
++ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
++ * requested descriptor</td></tr>
++ *
++ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
++ * not implemented by any of the existing Gadget Drivers.</td></tr>
++ *
++ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
++ * all EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
++ * the current configuration</td></tr>
++ *
++ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
++ * EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
++ * current interface.</td></tr>
++ *
++ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
++ * message.</td></tr>
++ * </table>
++ *
++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
++ * processed by pcd_setup. Calling the Function Driver's setup function from
++ * pcd_setup processes the gadget SETUP commands.
++ */
++static inline void pcd_setup(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t	*ep0 = &pcd->ep0;
++
++	deptsiz0_data_t doeptsize0 = { .d32 = 0};
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
++			ctrl.bRequestType, ctrl.bRequest,
++			ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++#endif
++
++	doeptsize0.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doeptsiz);
++
++	/** @todo handle > 1 setup packet , assert error for now */
++
++	if (core_if->dma_enable && core_if->dma_desc_enable == 0 && (doeptsize0.b.supcnt < 2)) {
++		DWC_ERROR ("\n\n-----------	 CANNOT handle > 1 setup packet in DMA mode\n\n");
++	}
++
++	/* Clean up the request queue */
++	dwc_otg_request_nuke(ep0);
++	ep0->stopped = 0;
++
++	if (ctrl.bRequestType & USB_DIR_IN) {
++		ep0->dwc_ep.is_in = 1;
++		pcd->ep0state = EP0_IN_DATA_PHASE;
++	}
++	else {
++		ep0->dwc_ep.is_in = 0;
++		pcd->ep0state = EP0_OUT_DATA_PHASE;
++	}
++
++	if(ctrl.wLength == 0) {
++		ep0->dwc_ep.is_in = 1;
++		pcd->ep0state = EP0_IN_STATUS_PHASE;
++	}
++
++	if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
++		/* handle non-standard (class/vendor) requests in the gadget driver */
++		do_gadget_setup(pcd, &ctrl);
++		return;
++	}
++
++	/** @todo NGS: Handle bad setup packet? */
++
++///////////////////////////////////////////
++//// --- Standard Request handling --- ////
++
++	switch (ctrl.bRequest) {
++		case USB_REQ_GET_STATUS:
++		do_get_status(pcd);
++		break;
++
++	case USB_REQ_CLEAR_FEATURE:
++		do_clear_feature(pcd);
++		break;
++
++	case USB_REQ_SET_FEATURE:
++		do_set_feature(pcd);
++		break;
++
++	case USB_REQ_SET_ADDRESS:
++		do_set_address(pcd);
++		break;
++
++	case USB_REQ_SET_INTERFACE:
++	case USB_REQ_SET_CONFIGURATION:
++//		_pcd->request_config = 1;	/* Configuration changed */
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	case USB_REQ_SYNCH_FRAME:
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	default:
++		/* Call the Gadget Driver's setup functions */
++		do_gadget_setup(pcd, &ctrl);
++		break;
++	}
++}
++
++/**
++ * This function completes the ep0 control transfer.
++ */
++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++	dev_if->in_ep_regs[ep->dwc_ep.num];
++#ifdef DEBUG_EP0
++	dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++			dev_if->out_ep_regs[ep->dwc_ep.num];
++#endif
++	deptsiz0_data_t deptsiz;
++	desc_sts_data_t desc_sts;
++	dwc_otg_pcd_request_t *req;
++	int is_last = 0;
++	dwc_otg_pcd_t *pcd = ep->pcd;
++
++	//DWC_DEBUGPL(DBG_PCDV, "%s() %s\n", __func__, _ep->ep.name);
++
++	if (pcd->ep0_pending && list_empty(&ep->queue)) {
++		if (ep->dwc_ep.is_in) {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
++#endif
++			do_setup_out_status_phase(pcd);
++		}
++		else {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
++#endif
++			do_setup_in_status_phase(pcd);
++		}
++		pcd->ep0_pending = 0;
++		return 1;
++	}
++
++	if (list_empty(&ep->queue)) {
++		return 0;
++	}
++	req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, queue);
++
++
++	if (pcd->ep0state == EP0_OUT_STATUS_PHASE || pcd->ep0state == EP0_IN_STATUS_PHASE) {
++		is_last = 1;
++	}
++	else if (ep->dwc_ep.is_in) {
++		deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
++		if(core_if->dma_desc_enable != 0)
++			desc_sts.d32 = readl(dev_if->in_desc_addr);
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCDV, "%s len=%d  xfersize=%d pktcnt=%d\n",
++				ep->ep.name, ep->dwc_ep.xfer_len,
++				deptsiz.b.xfersize, deptsiz.b.pktcnt);
++#endif
++
++		if (((core_if->dma_desc_enable == 0) && (deptsiz.b.xfersize == 0)) ||
++			((core_if->dma_desc_enable != 0) && (desc_sts.b.bytes == 0))) {
++			req->req.actual = ep->dwc_ep.xfer_count;
++			/* Is a Zero Len Packet needed? */
++			if (req->req.zero) {
++#ifdef DEBUG_EP0
++				DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
++#endif
++			    req->req.zero = 0;
++			}
++			do_setup_out_status_phase(pcd);
++		}
++	}
++	else {
++		/* ep0-OUT */
++#ifdef DEBUG_EP0
++		deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
++		DWC_DEBUGPL(DBG_PCDV, "%s len=%d xsize=%d pktcnt=%d\n",
++				ep->ep.name, ep->dwc_ep.xfer_len,
++				deptsiz.b.xfersize,
++				deptsiz.b.pktcnt);
++#endif
++		req->req.actual = ep->dwc_ep.xfer_count;
++		/* Is a Zero Len Packet needed? */
++		if (req->req.zero) {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
++#endif
++    			req->req.zero = 0;
++		}
++		if(core_if->dma_desc_enable == 0)
++			do_setup_in_status_phase(pcd);
++	}
++
++	/* Complete the request */
++	if (is_last) {
++		dwc_otg_request_done(ep, req, 0);
++		ep->dwc_ep.start_xfer_buff = 0;
++		ep->dwc_ep.xfer_buff = 0;
++		ep->dwc_ep.xfer_len = 0;
++		return 1;
++	}
++	return 0;
++}
++
++/**
++ * This function completes the request for the EP.	If there are
++ * additional requests for the EP in the queue they will be started.
++ */
++static void complete_ep(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++	dev_if->in_ep_regs[ep->dwc_ep.num];
++	deptsiz_data_t deptsiz;
++	desc_sts_data_t desc_sts;
++	dwc_otg_pcd_request_t *req = 0;
++	dwc_otg_dma_desc_t* dma_desc;
++	uint32_t byte_count = 0;
++	int is_last = 0;
++	int i;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s() %s-%s\n", __func__, ep->ep.name,
++					(ep->dwc_ep.is_in?"IN":"OUT"));
++
++	/* Get any pending requests */
++	if (!list_empty(&ep->queue)) {
++		req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
++				 queue);
++		if (!req) {
++			printk("complete_ep 0x%p, req = NULL!\n", ep);
++			return;
++		}
++	}
++	else {
++		printk("complete_ep 0x%p, ep->queue empty!\n", ep);
++		return;
++	}
++	DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
++
++	if (ep->dwc_ep.is_in) {
++		deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
++
++		if (core_if->dma_enable) {
++			if(core_if->dma_desc_enable == 0) {
++				if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
++					byte_count = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++					ep->dwc_ep.xfer_buff += byte_count;
++					ep->dwc_ep.dma_addr += byte_count;
++					ep->dwc_ep.xfer_count += byte_count;
++
++				DWC_DEBUGPL(DBG_PCDV, "%s len=%d  xfersize=%d pktcnt=%d\n",
++						ep->ep.name, ep->dwc_ep.xfer_len,
++						deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++
++					if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++						dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++					} else if(ep->dwc_ep.sent_zlp) {
++						/*
++						 * This fragment of code should initiate 0
++						 * length trasfer in case if it is queued
++						 * a trasfer with size divisible to EPs max
++						 * packet size and with usb_request zero field
++						 * is set, which means that after data is transfered,
++						 * it is also should be transfered
++						 * a 0 length packet at the end. For Slave and
++						 * Buffer DMA modes in this case SW has
++						 * to initiate 2 transfers one with transfer size,
++						 * and the second with 0 size. For Desriptor
++						 * DMA mode SW is able to initiate a transfer,
++						 * which will handle all the packets including
++						 * the last  0 legth.
++						 */
++						ep->dwc_ep.sent_zlp = 0;
++						dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++					} else {
++						is_last = 1;
++					}
++				} else {
++					DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
++							 ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
++							 deptsiz.b.xfersize, deptsiz.b.pktcnt);
++				}
++			} else {
++				dma_desc = ep->dwc_ep.desc_addr;
++				byte_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++
++				for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
++					desc_sts.d32 = readl(dma_desc);
++					byte_count += desc_sts.b.bytes;
++					dma_desc++;
++				}
++
++				if(byte_count == 0) {
++					ep->dwc_ep.xfer_count = ep->dwc_ep.total_len;
++					is_last = 1;
++				} else {
++					DWC_WARN("Incomplete transfer\n");
++				}
++			}
++		} else {
++			if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
++				/* 	Check if the whole transfer was completed,
++				 * 	if no, setup transfer for next portion of data
++				 */
++			DWC_DEBUGPL(DBG_PCDV, "%s len=%d  xfersize=%d pktcnt=%d\n",
++					ep->ep.name, ep->dwc_ep.xfer_len,
++					deptsiz.b.xfersize, deptsiz.b.pktcnt);
++				if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++					dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++				} else if(ep->dwc_ep.sent_zlp) {
++					/*
++					 * This fragment of code should initiate 0
++					 * length trasfer in case if it is queued
++					 * a trasfer with size divisible to EPs max
++					 * packet size and with usb_request zero field
++					 * is set, which means that after data is transfered,
++					 * it is also should be transfered
++					 * a 0 length packet at the end. For Slave and
++					 * Buffer DMA modes in this case SW has
++					 * to initiate 2 transfers one with transfer size,
++					 * and the second with 0 size. For Desriptor
++					 * DMA mode SW is able to initiate a transfer,
++					 * which will handle all the packets including
++					 * the last  0 legth.
++					 */
++					ep->dwc_ep.sent_zlp = 0;
++					dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++				} else {
++					is_last = 1;
++				}
++			}
++			else {
++				DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
++						ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
++						deptsiz.b.xfersize, deptsiz.b.pktcnt);
++			}
++		}
++	} else {
++		dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++				dev_if->out_ep_regs[ep->dwc_ep.num];
++		desc_sts.d32 = 0;
++		if(core_if->dma_enable) {
++			if(core_if->dma_desc_enable) {
++				dma_desc = ep->dwc_ep.desc_addr;
++				byte_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++				for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
++					desc_sts.d32 = readl(dma_desc);
++					byte_count += desc_sts.b.bytes;
++					dma_desc++;
++				}
++
++				ep->dwc_ep.xfer_count = ep->dwc_ep.total_len
++						- byte_count + ((4 - (ep->dwc_ep.total_len & 0x3)) & 0x3);
++				is_last = 1;
++			} else {
++				deptsiz.d32 = 0;
++				deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
++
++				byte_count = (ep->dwc_ep.xfer_len -
++							 ep->dwc_ep.xfer_count - deptsiz.b.xfersize);
++				ep->dwc_ep.xfer_buff += byte_count;
++				ep->dwc_ep.dma_addr += byte_count;
++				ep->dwc_ep.xfer_count += byte_count;
++
++				/* 	Check if the whole transfer was completed,
++				 * 	if no, setup transfer for next portion of data
++				 */
++				if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++					dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++				}
++				else if(ep->dwc_ep.sent_zlp) {
++					/*
++					 * This fragment of code should initiate 0
++					 * length trasfer in case if it is queued
++					 * a trasfer with size divisible to EPs max
++					 * packet size and with usb_request zero field
++					 * is set, which means that after data is transfered,
++					 * it is also should be transfered
++					 * a 0 length packet at the end. For Slave and
++					 * Buffer DMA modes in this case SW has
++					 * to initiate 2 transfers one with transfer size,
++					 * and the second with 0 size. For Desriptor
++					 * DMA mode SW is able to initiate a transfer,
++					 * which will handle all the packets including
++					 * the last  0 legth.
++					 */
++					ep->dwc_ep.sent_zlp = 0;
++					dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++				} else {
++					is_last = 1;
++				}
++			}
++		} else {
++			/* 	Check if the whole transfer was completed,
++			 * 	if no, setup transfer for next portion of data
++			 */
++			if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++				dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++			}
++			else if(ep->dwc_ep.sent_zlp) {
++				/*
++				 * This fragment of code should initiate 0
++				 * length trasfer in case if it is queued
++				 * a trasfer with size divisible to EPs max
++				 * packet size and with usb_request zero field
++				 * is set, which means that after data is transfered,
++				 * it is also should be transfered
++				 * a 0 length packet at the end. For Slave and
++				 * Buffer DMA modes in this case SW has
++				 * to initiate 2 transfers one with transfer size,
++				 * and the second with 0 size. For Desriptor
++				 * DMA mode SW is able to initiate a transfer,
++				 * which will handle all the packets including
++				 * the last  0 legth.
++				 */
++				ep->dwc_ep.sent_zlp = 0;
++				dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++			} else {
++				is_last = 1;
++			}
++		}
++
++#ifdef DEBUG
++
++		DWC_DEBUGPL(DBG_PCDV, "addr %p,	 %s len=%d cnt=%d xsize=%d pktcnt=%d\n",
++				&out_ep_regs->doeptsiz, ep->ep.name, ep->dwc_ep.xfer_len,
++				ep->dwc_ep.xfer_count,
++				deptsiz.b.xfersize,
++				deptsiz.b.pktcnt);
++#endif
++	}
++
++	/* Complete the request */
++	if (is_last) {
++		req->req.actual = ep->dwc_ep.xfer_count;
++
++		dwc_otg_request_done(ep, req, 0);
++
++		ep->dwc_ep.start_xfer_buff = 0;
++		ep->dwc_ep.xfer_buff = 0;
++		ep->dwc_ep.xfer_len = 0;
++
++		/* If there is a request in the queue start it.*/
++		start_next_request(ep);
++	}
++}
++
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function BNA interrupt for Isochronous EPs
++ *
++ */
++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_ep_t		*dwc_ep = &ep->dwc_ep;
++	volatile uint32_t	*addr;
++	depctl_data_t		depctl = {.d32 = 0};
++	dwc_otg_pcd_t		*pcd = ep->pcd;
++	dwc_otg_dma_desc_t	*dma_desc;
++	int	i;
++
++	dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
++
++	if(dwc_ep->is_in) {
++		desc_sts_data_t	sts = {.d32 = 0};
++		for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
++		{
++			sts.d32 = readl(&dma_desc->status);
++			sts.b_iso_in.bs = BS_HOST_READY;
++			writel(sts.d32,&dma_desc->status);
++		}
++	}
++	else {
++		desc_sts_data_t	sts = {.d32 = 0};
++		for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
++		{
++			sts.d32 = readl(&dma_desc->status);
++			sts.b_iso_out.bs = BS_HOST_READY;
++			writel(sts.d32,&dma_desc->status);
++		}
++	}
++
++	if(dwc_ep->is_in == 0){
++		addr = &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++	}
++	else{
++		addr = &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++	depctl.b.epena = 1;
++	dwc_modify_reg32(addr,depctl.d32,depctl.d32);
++}
++
++/**
++ * This function sets latest iso packet information(non-PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void set_current_pkt_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	deptsiz_data_t		deptsiz = { .d32 = 0 };
++	dma_addr_t		dma_addr;
++	uint32_t		offset;
++
++	if(ep->proc_buf_num)
++		dma_addr = ep->dma_addr1;
++	else
++		dma_addr = ep->dma_addr0;
++
++
++	if(ep->is_in) {
++		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
++		offset = ep->data_per_frame;
++	} else {
++		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
++		offset = ep->data_per_frame + (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
++	}
++
++	if(!deptsiz.b.xfersize) {
++		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++		ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
++		ep->pkt_info[ep->cur_pkt].status = 0;
++	} else {
++		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++		ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
++		ep->pkt_info[ep->cur_pkt].status = -ENODATA;
++	}
++	ep->cur_pkt_addr += offset;
++	ep->cur_pkt_dma_addr += offset;
++	ep->cur_pkt++;
++}
++
++/**
++ * This function sets latest iso packet information(DDMA mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++	dwc_otg_dma_desc_t* dma_desc;
++	desc_sts_data_t sts = {.d32 = 0};
++	iso_pkt_info_t *iso_packet;
++	uint32_t data_per_desc;
++	uint32_t offset;
++ 	int i, j;
++
++	iso_packet = dwc_ep->pkt_info;
++
++	/** Reinit closed DMA Descriptors*/
++	/** ISO OUT EP */
++	if(dwc_ep->is_in == 0) {
++		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++		offset = 0;
++
++		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++		{
++			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++			{
++				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++
++				sts.d32 = readl(&dma_desc->status);
++
++				/* Write status in iso_packet_decsriptor  */
++				iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
++				if(iso_packet->status) {
++					iso_packet->status = -ENODATA;
++				}
++
++				/* Received data length */
++				if(!sts.b_iso_out.rxbytes){
++					iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes;
++				} else {
++					iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes +
++								(4 - dwc_ep->data_per_frame % 4);
++				}
++
++				iso_packet->offset = offset;
++
++				offset += data_per_desc;
++				dma_desc ++;
++				iso_packet ++;
++			}
++		}
++
++		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++		{
++			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++
++			sts.d32 = readl(&dma_desc->status);
++
++			/* Write status in iso_packet_decsriptor  */
++			iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
++			if(iso_packet->status) {
++				iso_packet->status = -ENODATA;
++			}
++
++			/* Received data length */
++			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++
++			iso_packet->offset = offset;
++
++			offset += data_per_desc;
++			iso_packet++;
++			dma_desc++;
++		}
++
++		sts.d32 = readl(&dma_desc->status);
++
++		/* Write status in iso_packet_decsriptor  */
++		iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
++		if(iso_packet->status) {
++			iso_packet->status = -ENODATA;
++		}
++		/* Received data length */
++		if(!sts.b_iso_out.rxbytes){
++		iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++		} else {
++			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
++							(4 - dwc_ep->data_per_frame % 4);
++		}
++
++		iso_packet->offset = offset;
++	}
++	else /** ISO IN EP */
++	{
++		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
++		{
++			sts.d32 = readl(&dma_desc->status);
++
++			/* Write status in iso packet descriptor */
++			iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
++			if(iso_packet->status != 0) {
++				iso_packet->status = -ENODATA;
++
++			}
++			/* Bytes has been transfered */
++			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++
++			dma_desc ++;
++			iso_packet++;
++		}
++
++		sts.d32 = readl(&dma_desc->status);
++		while(sts.b_iso_in.bs == BS_DMA_BUSY) {
++			sts.d32 = readl(&dma_desc->status);
++		}
++
++		/* Write status in iso packet descriptor ??? do be done with ERROR codes*/
++		iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
++		if(iso_packet->status != 0) {
++			iso_packet->status = -ENODATA;
++		}
++
++		/* Bytes has been transfered */
++		iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++	}
++}
++
++/**
++ * This function reinitialize DMA Descriptors for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++ 	int i, j;
++	dwc_otg_dma_desc_t* dma_desc;
++	dma_addr_t dma_ad;
++	volatile uint32_t	*addr;
++	desc_sts_data_t sts = { .d32 =0 };
++	uint32_t data_per_desc;
++
++	if(dwc_ep->is_in == 0) {
++		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++	}
++	else {
++		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++
++
++	if(dwc_ep->proc_buf_num == 0) {
++		/** Buffer 0 descriptors setup */
++		dma_ad = dwc_ep->dma_addr0;
++	}
++	else {
++		/** Buffer 1 descriptors setup */
++		dma_ad = dwc_ep->dma_addr1;
++	}
++
++
++	/** Reinit closed DMA Descriptors*/
++	/** ISO OUT EP */
++	if(dwc_ep->is_in == 0) {
++		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		sts.b_iso_out.bs = BS_HOST_READY;
++		sts.b_iso_out.rxsts = 0;
++		sts.b_iso_out.l = 0;
++		sts.b_iso_out.sp = 0;
++		sts.b_iso_out.ioc = 0;
++		sts.b_iso_out.pid = 0;
++		sts.b_iso_out.framenum = 0;
++
++		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++		{
++			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++			{
++				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++				sts.b_iso_out.rxbytes = data_per_desc;
++				writel((uint32_t)dma_ad, &dma_desc->buf);
++				writel(sts.d32, &dma_desc->status);
++
++				(uint32_t)dma_ad += data_per_desc;
++				dma_desc ++;
++			}
++		}
++
++		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++		{
++
++			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++
++			dma_desc++;
++			(uint32_t)dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		sts.b_iso_out.l = dwc_ep->proc_buf_num;
++
++		data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++			dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++	}
++	else /** ISO IN EP */
++	{
++		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		sts.b_iso_in.bs = BS_HOST_READY;
++		sts.b_iso_in.txsts = 0;
++		sts.b_iso_in.sp = 0;
++		sts.b_iso_in.ioc = 0;
++		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++		sts.b_iso_in.framenum = dwc_ep->next_frame;
++		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++		sts.b_iso_in.l = 0;
++
++		for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
++		{
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++
++			sts.b_iso_in.framenum  += dwc_ep->bInterval;
++			(uint32_t)dma_ad += dwc_ep->data_per_frame;
++			dma_desc ++;
++		}
++
++		sts.b_iso_in.ioc = 1;
++		sts.b_iso_in.l = dwc_ep->proc_buf_num;
++
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++
++		dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
++	}
++	dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++}
++
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ * in case Iso out packet was dropped
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP for wihich transfer complete was asserted
++ *
++ */
++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++	uint32_t dma_addr;
++	uint32_t drp_pkt;
++	uint32_t drp_pkt_cnt;
++	deptsiz_data_t deptsiz = { .d32 = 0 };
++	depctl_data_t depctl  = { .d32 = 0 };
++	int i;
++
++	deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
++
++	drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
++	drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
++
++	/* Setting dropped packets status */
++	for(i = 0; i < drp_pkt_cnt; ++i) {
++		dwc_ep->pkt_info[drp_pkt].status = -ENODATA;
++		drp_pkt ++;
++		deptsiz.b.pktcnt--;
++	}
++
++
++	if(deptsiz.b.pktcnt > 0) {
++		deptsiz.b.xfersize = dwc_ep->xfer_len - (dwc_ep->pkt_cnt - deptsiz.b.pktcnt) * dwc_ep->maxpacket;
++	} else {
++		deptsiz.b.xfersize = 0;
++		deptsiz.b.pktcnt = 0;
++	}
++
++	dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, deptsiz.d32);
++
++	if(deptsiz.b.pktcnt > 0) {
++		if(dwc_ep->proc_buf_num) {
++			dma_addr = dwc_ep->dma_addr1 + dwc_ep->xfer_len - deptsiz.b.xfersize;
++		} else {
++			dma_addr = dwc_ep->dma_addr0 + dwc_ep->xfer_len - deptsiz.b.xfersize;;
++		}
++
++		dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
++
++		/** Re-enable endpoint, clear nak  */
++		depctl.d32 = 0;
++		depctl.b.epena = 1;
++		depctl.b.cnak = 1;
++
++		dwc_modify_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl,
++				depctl.d32,depctl.d32);
++		return 0;
++	} else {
++		return 1;
++	}
++}
++
++/**
++ * This function sets iso packets information(PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ 	int i, j;
++	dma_addr_t dma_ad;
++	iso_pkt_info_t *packet_info = ep->pkt_info;
++	uint32_t offset;
++	uint32_t frame_data;
++	deptsiz_data_t deptsiz;
++
++	if(ep->proc_buf_num == 0) {
++		/** Buffer 0 descriptors setup */
++		dma_ad = ep->dma_addr0;
++	}
++	else {
++		/** Buffer 1 descriptors setup */
++		dma_ad = ep->dma_addr1;
++	}
++
++
++	if(ep->is_in) {
++		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
++	} else {
++		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
++	}
++
++	if(!deptsiz.b.xfersize) {
++		offset = 0;
++		for(i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm)
++		{
++			frame_data = ep->data_per_frame;
++			for(j = 0; j < ep->pkt_per_frm; ++j) {
++
++				/* Packet status - is not set as initially
++				 * it is set to 0 and if packet was sent
++				 successfully, status field will remain 0*/
++
++
++				/* Bytes has been transfered */
++				packet_info->length = (ep->maxpacket < frame_data) ?
++							ep->maxpacket : frame_data;
++
++				/* Received packet offset */
++				packet_info->offset = offset;
++				offset += packet_info->length;
++				frame_data -= packet_info->length;
++
++				packet_info ++;
++			}
++		}
++		return 1;
++	} else {
++		/* This is a workaround for in case of Transfer Complete with
++		 * PktDrpSts interrupts	merging - in this case Transfer complete
++		 * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
++		 * set and with DOEPTSIZ register non zero. Investigations showed,
++		 * that this happens when Out packet is dropped, but because of
++		 * interrupts merging during first interrupt handling PktDrpSts
++		 * bit is cleared and for next merged interrupts it is not reset.
++		 * In this case SW hadles the interrupt as if PktDrpSts bit is set.
++		 */
++		if(ep->is_in) {
++			return 1;
++		} else {
++			return handle_iso_out_pkt_dropped(core_if, ep);
++		}
++	}
++}
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ *
++ * @param ep The EP for which transfer complete was asserted
++ *
++ */
++static void complete_iso_ep(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	uint8_t is_last = 0;
++
++	if(core_if->dma_enable) {
++		if(core_if->dma_desc_enable) {
++			set_ddma_iso_pkts_info(core_if, dwc_ep);
++			reinit_ddma_iso_xfer(core_if, dwc_ep);
++			is_last = 1;
++		} else {
++			if(core_if->pti_enh_enable) {
++				if(set_iso_pkts_info(core_if, dwc_ep)) {
++					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++					dwc_otg_iso_ep_start_buf_transfer(core_if, dwc_ep);
++					is_last = 1;
++				}
++			} else {
++				set_current_pkt_info(core_if, dwc_ep);
++				if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					is_last = 1;
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++					if(dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++					}
++
++				}
++				dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
++			}
++		}
++	} else {
++		set_current_pkt_info(core_if, dwc_ep);
++		if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++			is_last = 1;
++			dwc_ep->cur_pkt = 0;
++			dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++			if(dwc_ep->proc_buf_num) {
++				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++			} else {
++				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++			}
++
++		}
++		dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
++	}
++	if(is_last)
++		dwc_otg_iso_buffer_done(ep, ep->iso_req);
++}
++
++#endif  //DWC_EN_ISOC
++
++
++/**
++ * This function handles EP0 Control transfers.
++ *
++ * The state of the control tranfers are tracked in
++ * <code>ep0state</code>.
++ */
++static void handle_ep0(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	desc_sts_data_t desc_sts;
++	deptsiz0_data_t deptsiz;
++	uint32_t byte_count;
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++	print_ep0_state(pcd);
++#endif
++
++	switch (pcd->ep0state) {
++	case EP0_DISCONNECT:
++		break;
++
++	case EP0_IDLE:
++		pcd->request_config = 0;
++
++		pcd_setup(pcd);
++		break;
++
++	case EP0_IN_DATA_PHASE:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
++				ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
++				ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++
++		if (core_if->dma_enable != 0) {
++			/*
++			 * For EP0 we can only program 1 packet at a time so we
++			 * need to do the make calculations after each complete.
++			 * Call write_packet to make the calculations, as in
++			 * slave mode, and use those values to determine if we
++			 * can complete.
++			 */
++			if(core_if->dma_desc_enable == 0) {
++				deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->dieptsiz);
++				byte_count = ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
++			}
++			else {
++				desc_sts.d32 = readl(core_if->dev_if->in_desc_addr);
++				byte_count = ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
++			}
++			ep0->dwc_ep.xfer_count += byte_count;
++			ep0->dwc_ep.xfer_buff += byte_count;
++			ep0->dwc_ep.dma_addr += byte_count;
++		}
++		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		}
++		else if(ep0->dwc_ep.sent_zlp) {
++			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++			ep0->dwc_ep.sent_zlp = 0;
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		}
++		else {
++			ep0_complete_request(ep0);
++			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++		}
++		break;
++	case EP0_OUT_DATA_PHASE:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
++				ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
++				ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++		if (core_if->dma_enable != 0) {
++			if(core_if->dma_desc_enable == 0) {
++				deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[0]->doeptsiz);
++				byte_count = ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
++			}
++			else {
++				desc_sts.d32 = readl(core_if->dev_if->out_desc_addr);
++				byte_count = ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
++			}
++			ep0->dwc_ep.xfer_count += byte_count;
++			ep0->dwc_ep.xfer_buff += byte_count;
++			ep0->dwc_ep.dma_addr += byte_count;
++		}
++		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		}
++		else if(ep0->dwc_ep.sent_zlp) {
++			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++			ep0->dwc_ep.sent_zlp = 0;
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++	}
++		else {
++			ep0_complete_request(ep0);
++			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++		}
++		break;
++
++
++	case EP0_IN_STATUS_PHASE:
++	case EP0_OUT_STATUS_PHASE:
++		DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
++				ep0_complete_request(ep0);
++				pcd->ep0state = EP0_IDLE;
++				ep0->stopped = 1;
++				ep0->dwc_ep.is_in = 0;	/* OUT for next SETUP */
++
++		/* Prepare for more SETUP Packets */
++		if(core_if->dma_enable) {
++			ep0_out_start(core_if, pcd);
++		}
++		break;
++
++	case EP0_STALL:
++		DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
++		break;
++	}
++#ifdef DEBUG_EP0
++	print_ep0_state(pcd);
++#endif
++}
++
++
++/**
++ * Restart transfer
++ */
++static void restart_transfer(dwc_otg_pcd_t *pcd, const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if;
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t dieptsiz = {.d32=0};
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_in_ep(pcd, epnum);
++
++#ifdef DWC_EN_ISOC
++	if(ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		return;
++	}
++#endif /* DWC_EN_ISOC  */
++
++	core_if = GET_CORE_IF(pcd);
++	dev_if = core_if->dev_if;
++
++	dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++
++	DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x xfer_len=%0x"
++			" stopped=%d\n", ep->dwc_ep.xfer_buff,
++			ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
++			ep->stopped);
++	/*
++	 * If xfersize is 0 and pktcnt in not 0, resend the last packet.
++	 */
++	if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
++		 ep->dwc_ep.start_xfer_buff != 0) {
++		if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
++			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++		}
++		else {
++			ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
++			/* convert packet size to dwords. */
++			ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
++			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++		}
++		ep->stopped = 0;
++		DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x "
++					"xfer_len=%0x stopped=%d\n",
++					ep->dwc_ep.xfer_buff,
++					ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
++					ep->stopped
++					);
++		if (epnum == 0) {
++			dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
++		}
++		else {
++			dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++		}
++	}
++}
++
++
++/**
++ * handle the IN EP disable interrupt.
++ */
++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t *pcd,
++						 const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	deptsiz_data_t dieptsiz = {.d32=0};
++	dctl_data_t dctl = {.d32=0};
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_in_ep(pcd, epnum);
++	dwc_ep = &ep->dwc_ep;
++
++	if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++		dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++		return;
++	}
++
++	DWC_DEBUGPL(DBG_PCD,"diepctl%d=%0x\n", epnum,
++			dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl));
++	dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++
++	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++			dieptsiz.b.pktcnt,
++			dieptsiz.b.xfersize);
++
++	if (ep->stopped) {
++		/* Flush the Tx FIFO */
++		dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++		/* Clear the Global IN NP NAK */
++		dctl.d32 = 0;
++		dctl.b.cgnpinnak = 1;
++		dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
++					 dctl.d32, 0);
++		/* Restart the transaction */
++		if (dieptsiz.b.pktcnt != 0 ||
++			dieptsiz.b.xfersize != 0) {
++			restart_transfer(pcd, epnum);
++		}
++	}
++	else {
++		/* Restart the transaction */
++		if (dieptsiz.b.pktcnt != 0 ||
++			dieptsiz.b.xfersize != 0) {
++			restart_transfer(pcd, epnum);
++		}
++		DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
++	}
++}
++
++/**
++ * Handler for the IN EP timeout handshake interrupt.
++ */
++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t *pcd,
++						const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++
++#ifdef DEBUG
++	deptsiz_data_t dieptsiz = {.d32=0};
++	uint32_t num = 0;
++#endif
++	dctl_data_t dctl = {.d32=0};
++	dwc_otg_pcd_ep_t *ep;
++
++	gintmsk_data_t intr_mask = {.d32 = 0};
++
++	ep = get_in_ep(pcd, epnum);
++
++	/* Disable the NP Tx Fifo Empty Interrrupt */
++	if (!core_if->dma_enable) {
++		intr_mask.b.nptxfempty = 1;
++		dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
++	}
++	/** @todo NGS Check EP type.
++	 * Implement for Periodic EPs */
++	/*
++	 * Non-periodic EP
++	 */
++	/* Enable the Global IN NAK Effective Interrupt */
++	intr_mask.b.ginnakeff = 1;
++	dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++					  0, intr_mask.d32);
++
++	/* Set Global IN NAK */
++	dctl.b.sgnpinnak = 1;
++	dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
++					 dctl.d32, dctl.d32);
++
++	ep->stopped = 1;
++
++#ifdef DEBUG
++	dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[num]->dieptsiz);
++	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++			dieptsiz.b.pktcnt,
++			dieptsiz.b.xfersize);
++#endif
++
++#ifdef DISABLE_PERIODIC_EP
++	/*
++	 * Set the NAK bit for this EP to
++	 * start the disable process.
++	 */
++	diepctl.d32 = 0;
++	diepctl.b.snak = 1;
++	dwc_modify_reg32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, diepctl.d32);
++	ep->disabling = 1;
++	ep->stopped = 1;
++#endif
++}
++
++/**
++ * Handler for the IN EP NAK interrupt.
++ */
++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t *pcd,
++						const uint32_t epnum)
++{
++        /** @todo implement ISR */
++        dwc_otg_core_if_t* core_if;
++	diepmsk_data_t intr_mask = { .d32 = 0};
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nak = 1;
++
++	if(core_if->multiproc_int_enable) {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[epnum],
++					  intr_mask.d32, 0);
++	} else {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepmsk,
++					  intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP Babble interrupt.
++ */
++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t *pcd,
++						const uint32_t epnum)
++{
++        /** @todo implement ISR */
++        dwc_otg_core_if_t* core_if;
++	doepmsk_data_t intr_mask = { .d32 = 0};
++
++ 	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP Babble");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.babble = 1;
++
++	if(core_if->multiproc_int_enable) {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
++					  intr_mask.d32, 0);
++	} else {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
++					  intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP NAK interrupt.
++ */
++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t *pcd,
++						const uint32_t epnum)
++{
++        /** @todo implement ISR */
++        dwc_otg_core_if_t* core_if;
++	doepmsk_data_t intr_mask = { .d32 = 0};
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nak = 1;
++
++	if(core_if->multiproc_int_enable) {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
++					  intr_mask.d32, 0);
++	} else {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
++					  intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP NYET interrupt.
++ */
++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t *pcd,
++						const uint32_t epnum)
++{
++        /** @todo implement ISR */
++        dwc_otg_core_if_t* core_if;
++	doepmsk_data_t intr_mask = { .d32 = 0};
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nyet = 1;
++
++	if(core_if->multiproc_int_enable) {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
++					  intr_mask.d32, 0);
++	} else {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
++					  intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that an IN EP has a pending Interrupt.
++ * The sequence for handling the IN EP interrupt is shown below:
++ * -#	Read the Device All Endpoint Interrupt register
++ * -#	Repeat the following for each IN EP interrupt bit set (from
++ *		LSB to MSB).
++ * -#	Read the Device Endpoint Interrupt (DIEPINTn) register
++ * -#	If "Transfer Complete" call the request complete function
++ * -#	If "Endpoint Disabled" complete the EP disable procedure.
++ * -#	If "AHB Error Interrupt" log error
++ * -#	If "Time-out Handshake" log error
++ * -#	If "IN Token Received when TxFIFO Empty" write packet to Tx
++ *		FIFO.
++ * -#	If "IN Token EP Mismatch" (disable, this is handled by EP
++ *		Mismatch Interrupt)
++ */
++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t *pcd)
++{
++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++		diepint_data_t diepint = {.d32=0}; \
++		diepint.b.__intr = 1; \
++		dwc_write_reg32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
++		diepint.d32); \
++} while (0)
++
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	diepint_data_t diepint = {.d32=0};
++	dctl_data_t dctl = {.d32=0};
++	depctl_data_t depctl = {.d32=0};
++	uint32_t ep_intr;
++	uint32_t epnum = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	gintmsk_data_t intr_mask = {.d32 = 0};
++
++
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
++
++	/* Read in the device interrupt bits */
++	ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
++
++	/* Service the Device IN interrupts for each endpoint */
++	while(ep_intr) {
++		if (ep_intr&0x1) {
++			uint32_t empty_msk;
++			/* Get EP pointer */
++			ep = get_in_ep(pcd, epnum);
++			dwc_ep = &ep->dwc_ep;
++
++			depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
++			empty_msk = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++
++			DWC_DEBUGPL(DBG_PCDV,
++					"IN EP INTERRUPT - %d\nepmty_msk - %8x  diepctl - %8x\n",
++					epnum,
++					empty_msk,
++					depctl.d32);
++
++			DWC_DEBUGPL(DBG_PCD,
++					"EP%d-%s: type=%d, mps=%d\n",
++					dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
++					dwc_ep->type, dwc_ep->maxpacket);
++
++			diepint.d32 = dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
++
++			DWC_DEBUGPL(DBG_PCDV, "EP %d Interrupt Register - 0x%x\n", epnum, diepint.d32);
++			/* Transfer complete */
++			if (diepint.b.xfercompl) {
++				/* Disable the NP Tx FIFO Empty
++				 * Interrrupt */
++					if(core_if->en_multiple_tx_fifo == 0) {
++					intr_mask.b.nptxfempty = 1;
++					dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
++				}
++				else {
++					/* Disable the Tx FIFO Empty Interrupt for this EP */
++					uint32_t fifoemptymsk = 0x1 << dwc_ep->num;
++					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++					fifoemptymsk, 0);
++				}
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if,epnum,xfercompl);
++
++				/* Complete the transfer */
++				if (epnum == 0) {
++					handle_ep0(pcd);
++				}
++#ifdef DWC_EN_ISOC
++				else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if(!ep->stopped)
++						complete_iso_ep(ep);
++				}
++#endif //DWC_EN_ISOC
++				else {
++
++					complete_ep(ep);
++				}
++			}
++			/* Endpoint disable	 */
++			if (diepint.b.epdisabled) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN disabled\n", epnum);
++				handle_in_ep_disable_intr(pcd, epnum);
++
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if,epnum,epdisabled);
++			}
++			/* AHB Error */
++			if (diepint.b.ahberr) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN AHB Error\n", epnum);
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if,epnum,ahberr);
++			}
++			/* TimeOUT Handshake (non-ISOC IN EPs) */
++			if (diepint.b.timeout) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN Time-out\n", epnum);
++				handle_in_ep_timeout_intr(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if,epnum,timeout);
++			}
++			/** IN Token received with TxF Empty */
++			if (diepint.b.intktxfemp) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN TxFifo Empty\n",
++								epnum);
++				if (!ep->stopped && epnum != 0) {
++
++					diepmsk_data_t diepmsk = { .d32 = 0};
++					diepmsk.b.intktxfemp = 1;
++
++					if(core_if->multiproc_int_enable) {
++						dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[epnum],
++							diepmsk.d32, 0);
++					} else {
++						dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32, 0);
++					}
++					start_next_request(ep);
++				}
++				else if(core_if->dma_desc_enable && epnum == 0 &&
++						pcd->ep0state == EP0_OUT_STATUS_PHASE) {
++					// EP0 IN set STALL
++					depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
++
++					/* set the disable and stall bits */
++					if (depctl.b.epena) {
++						depctl.b.epdis = 1;
++					}
++					depctl.b.stall = 1;
++					dwc_write_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
++				}
++				CLEAR_IN_EP_INTR(core_if,epnum,intktxfemp);
++			}
++			/** IN Token Received with EP mismatch */
++			if (diepint.b.intknepmis) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN EP Mismatch\n", epnum);
++				CLEAR_IN_EP_INTR(core_if,epnum,intknepmis);
++			}
++			/** IN Endpoint NAK Effective */
++			if (diepint.b.inepnakeff) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN EP NAK Effective\n", epnum);
++				/* Periodic EP */
++				if (ep->disabling) {
++					depctl.d32 = 0;
++					depctl.b.snak = 1;
++					depctl.b.epdis = 1;
++					dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
++				}
++				CLEAR_IN_EP_INTR(core_if,epnum,inepnakeff);
++
++			}
++
++			/** IN EP Tx FIFO Empty Intr */
++			if (diepint.b.emptyintr) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d Tx FIFO Empty Intr \n", epnum);
++				write_empty_tx_fifo(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if,epnum,emptyintr);
++
++			}
++
++			/** IN EP BNA Intr */
++			if (diepint.b.bna) {
++				CLEAR_IN_EP_INTR(core_if,epnum,bna);
++				if(core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++					if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++						/*
++						 * This checking is performed to prevent first "false" BNA
++						 * handling occuring right after reconnect
++						 */
++						if(dwc_ep->next_frame != 0xffffffff)
++							dwc_otg_pcd_handle_iso_bna(ep);
++					}
++					else
++#endif //DWC_EN_ISOC
++					{
++						dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
++
++						/* If Global Continue on BNA is disabled - disable EP */
++						if(!dctl.b.gcontbna) 						{
++							depctl.d32 = 0;
++							depctl.b.snak = 1;
++							depctl.b.epdis = 1;
++							dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
++						} else {
++							start_next_request(ep);
++						}
++					}
++				}
++			}
++			/* NAK Interrutp */
++			if (diepint.b.nak) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN NAK Interrupt\n", epnum);
++				handle_in_ep_nak_intr(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if,epnum,nak);
++			}
++		}
++		epnum++;
++		ep_intr >>=1;
++	}
++
++	return 1;
++#undef CLEAR_IN_EP_INTR
++}
++
++/**
++ * This interrupt indicates that an OUT EP has a pending Interrupt.
++ * The sequence for handling the OUT EP interrupt is shown below:
++ * -#	Read the Device All Endpoint Interrupt register
++ * -#	Repeat the following for each OUT EP interrupt bit set (from
++ *		LSB to MSB).
++ * -#	Read the Device Endpoint Interrupt (DOEPINTn) register
++ * -#	If "Transfer Complete" call the request complete function
++ * -#	If "Endpoint Disabled" complete the EP disable procedure.
++ * -#	If "AHB Error Interrupt" log error
++ * -#	If "Setup Phase Done" process Setup Packet (See Standard USB
++ *		Command Processing)
++ */
++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t *pcd)
++{
++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++		doepint_data_t doepint = {.d32=0}; \
++		doepint.b.__intr = 1; \
++		dwc_write_reg32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
++		doepint.d32); \
++} while (0)
++
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	uint32_t ep_intr;
++	doepint_data_t doepint = {.d32=0};
++	dctl_data_t dctl = {.d32=0};
++	depctl_data_t doepctl = {.d32=0};
++	uint32_t epnum = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++
++	/* Read in the device interrupt bits */
++	ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
++
++	while(ep_intr) {
++		if (ep_intr&0x1) {
++			/* Get EP pointer */
++			ep = get_out_ep(pcd, epnum);
++			dwc_ep = &ep->dwc_ep;
++
++#ifdef VERBOSE
++			DWC_DEBUGPL(DBG_PCDV,
++					"EP%d-%s: type=%d, mps=%d\n",
++					dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
++					dwc_ep->type, dwc_ep->maxpacket);
++#endif
++			doepint.d32 = dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
++
++			/* Transfer complete */
++			if (doepint.b.xfercompl) {
++
++				if (epnum == 0) {
++					/* Clear the bit in DOEPINTn for this interrupt */
++					CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
++					if(core_if->dma_desc_enable == 0 || pcd->ep0state != EP0_IDLE)
++						handle_ep0(pcd);
++#ifdef DWC_EN_ISOC
++				} else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (doepint.b.pktdrpsts == 0) {
++						/* Clear the bit in DOEPINTn for this interrupt */
++						CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
++						complete_iso_ep(ep);
++					} else {
++
++						doepint_data_t doepint = {.d32=0};
++						doepint.b.xfercompl = 1;
++						doepint.b.pktdrpsts = 1;
++						dwc_write_reg32(&core_if->dev_if->out_ep_regs[epnum]->doepint,
++							doepint.d32);
++						if(handle_iso_out_pkt_dropped(core_if,dwc_ep)) {
++							complete_iso_ep(ep);
++						}
++					}
++#endif //DWC_EN_ISOC
++				} else {
++					/* Clear the bit in DOEPINTn for this interrupt */
++					CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
++					complete_ep(ep);
++				}
++
++			}
++
++			/* Endpoint disable	 */
++			if (doepint.b.epdisabled) {
++
++				/* Clear the bit in DOEPINTn for this interrupt */
++				CLEAR_OUT_EP_INTR(core_if,epnum,epdisabled);
++			}
++			/* AHB Error */
++			if (doepint.b.ahberr) {
++				DWC_DEBUGPL(DBG_PCD,"EP%d OUT AHB Error\n", epnum);
++				DWC_DEBUGPL(DBG_PCD,"EP DMA REG	 %d \n", core_if->dev_if->out_ep_regs[epnum]->doepdma);
++				CLEAR_OUT_EP_INTR(core_if,epnum,ahberr);
++			}
++			/* Setup Phase Done (contorl EPs) */
++			if (doepint.b.setup) {
++#ifdef DEBUG_EP0
++				DWC_DEBUGPL(DBG_PCD,"EP%d SETUP Done\n",
++							epnum);
++#endif
++				CLEAR_OUT_EP_INTR(core_if,epnum,setup);
++
++				handle_ep0(pcd);
++			}
++
++			/** OUT EP BNA Intr */
++			if (doepint.b.bna) {
++				CLEAR_OUT_EP_INTR(core_if,epnum,bna);
++				if(core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++					if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++						/*
++						 * This checking is performed to prevent first "false" BNA
++						 * handling occuring right after reconnect
++						 */
++						if(dwc_ep->next_frame != 0xffffffff)
++							dwc_otg_pcd_handle_iso_bna(ep);
++					}
++					else
++#endif //DWC_EN_ISOC
++					{
++						dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
++
++						/* If Global Continue on BNA is disabled - disable EP*/
++						if(!dctl.b.gcontbna) {
++							doepctl.d32 = 0;
++							doepctl.b.snak = 1;
++							doepctl.b.epdis = 1;
++							dwc_modify_reg32(&dev_if->out_ep_regs[epnum]->doepctl, doepctl.d32, doepctl.d32);
++						} else {
++							start_next_request(ep);
++						}
++					}
++				}
++			}
++			if (doepint.b.stsphsercvd) {
++				CLEAR_OUT_EP_INTR(core_if,epnum,stsphsercvd);
++				if(core_if->dma_desc_enable) {
++					do_setup_in_status_phase(pcd);
++				}
++			}
++			/* Babble Interrutp */
++			if (doepint.b.babble) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d OUT Babble\n", epnum);
++				handle_out_ep_babble_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if,epnum,babble);
++			}
++			/* NAK Interrutp */
++			if (doepint.b.nak) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d OUT NAK\n", epnum);
++				handle_out_ep_nak_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if,epnum,nak);
++			}
++			/* NYET Interrutp */
++			if (doepint.b.nyet) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d OUT NYET\n", epnum);
++				handle_out_ep_nyet_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if,epnum,nyet);
++			}
++		}
++
++		epnum++;
++		ep_intr >>=1;
++	}
++
++	return 1;
++
++#undef CLEAR_OUT_EP_INTR
++}
++
++
++/**
++ * Incomplete ISO IN Transfer Interrupt.
++ * This interrupt indicates one of the following conditions occurred
++ * while transmitting an ISOC transaction.
++ * - Corrupted IN Token for ISOC EP.
++ * - Packet not complete in FIFO.
++ * The follow actions will be taken:
++ *	-#	Determine the EP
++ *	-#	Set incomplete flag in dwc_ep structure
++ *	-#	Disable EP; when "Endpoint Disabled" interrupt is received
++ *		Flush FIFO
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t *pcd)
++{
++	gintsts_data_t 		gintsts;
++
++
++#ifdef DWC_EN_ISOC
++	dwc_otg_dev_if_t 	*dev_if;
++	deptsiz_data_t 		deptsiz = { .d32 = 0};
++	depctl_data_t		depctl = { .d32 = 0};
++	dsts_data_t		dsts = { .d32 = 0};
++	dwc_ep_t		*dwc_ep;
++	int i;
++
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	for(i = 1; i <= dev_if->num_in_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i].dwc_ep;
++		if(dwc_ep->active &&
++			dwc_ep->type == USB_ENDPOINT_XFER_ISOC)
++		{
++			deptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->dieptsiz);
++			depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++
++			if(depctl.b.epdis && deptsiz.d32) {
++				set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
++				if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++					if(dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++					}
++
++				}
++
++				dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
++				dwc_ep->next_frame = dsts.b.soffn;
++
++				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
++			}
++		}
++	}
++
++#else
++        gintmsk_data_t intr_mask = { .d32 = 0};
++        DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++                          "IN ISOC Incomplete");
++
++        intr_mask.b.incomplisoin = 1;
++        dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++                                intr_mask.d32, 0);
++#endif //DWC_EN_ISOC
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.incomplisoin = 1;
++	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++				gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * Incomplete ISO OUT Transfer Interrupt.
++ *
++ * This interrupt indicates that the core has dropped an ISO OUT
++ * packet.	The following conditions can be the cause:
++ * - FIFO Full, the entire packet would not fit in the FIFO.
++ * - CRC Error
++ * - Corrupted Token
++ * The follow actions will be taken:
++ *	-#	Determine the EP
++ *	-#	Set incomplete flag in dwc_ep structure
++ *	-#	Read any data from the FIFO
++ *	-#	Disable EP.	 when "Endpoint Disabled" interrupt is received
++ *		re-enable EP.
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t *pcd)
++{
++	/* @todo implement ISR */
++	gintsts_data_t gintsts;
++
++#ifdef DWC_EN_ISOC
++	dwc_otg_dev_if_t 	*dev_if;
++	deptsiz_data_t 		deptsiz = { .d32 = 0};
++	depctl_data_t		depctl = { .d32 = 0};
++	dsts_data_t		dsts = { .d32 = 0};
++	dwc_ep_t		*dwc_ep;
++	int i;
++
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	for(i = 1; i <= dev_if->num_out_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i].dwc_ep;
++		if(pcd->out_ep[i].dwc_ep.active &&
++			pcd->out_ep[i].dwc_ep.type == USB_ENDPOINT_XFER_ISOC)
++		{
++			deptsiz.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doeptsiz);
++			depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
++
++			if(depctl.b.epdis && deptsiz.d32) {
++				set_current_pkt_info(GET_CORE_IF(pcd), &pcd->out_ep[i].dwc_ep);
++				if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++					if(dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++					}
++
++				}
++
++				dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
++				dwc_ep->next_frame = dsts.b.soffn;
++
++				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
++			}
++		}
++	}
++#else
++        /** @todo implement ISR */
++        gintmsk_data_t intr_mask = { .d32 = 0};
++
++        DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++                          "OUT ISOC Incomplete");
++
++        intr_mask.b.incomplisoout = 1;
++        dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++                                intr_mask.d32, 0);
++
++#endif // DWC_EN_ISOC
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.incomplisoout = 1;
++	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++				gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function handles the Global IN NAK Effective interrupt.
++ *
++ */
++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	depctl_data_t diepctl = { .d32 = 0};
++	depctl_data_t diepctl_rd = { .d32 = 0};
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	gintsts_data_t gintsts;
++	int i;
++
++	DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
++
++	/* Disable all active IN EPs */
++	diepctl.b.epdis = 1;
++	diepctl.b.snak = 1;
++
++	for (i=0; i <= dev_if->num_in_eps; i++)
++	{
++		diepctl_rd.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++		if (diepctl_rd.b.epena) {
++			dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl,
++						diepctl.d32);
++		}
++	}
++	/* Disable the Global IN NAK Effective Interrupt */
++	intr_mask.b.ginnakeff = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++					  intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.ginnakeff = 1;
++	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++						 gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * OUT NAK Effective.
++ *
++ */
++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t *pcd)
++{
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	gintsts_data_t gintsts;
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++			  "Global IN NAK Effective\n");
++	/* Disable the Global IN NAK Effective Interrupt */
++	intr_mask.b.goutnakeff = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++					  intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.goutnakeff = 1;
++	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++						 gintsts.d32);
++
++	return 1;
++}
++
++
++/**
++ * PCD interrupt handler.
++ *
++ * The PCD handles the device interrupts.  Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ *
++ * All interrupt registers are processed from LSB to MSB.
++ *
++ */
++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++#ifdef VERBOSE
++	dwc_otg_core_global_regs_t *global_regs =
++			core_if->core_global_regs;
++#endif
++	gintsts_data_t gintr_status;
++	int32_t retval = 0;
++
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x	 gintmsk=%08x\n",
++				__func__,
++				dwc_read_reg32(&global_regs->gintsts),
++				dwc_read_reg32(&global_regs->gintmsk));
++#endif
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		SPIN_LOCK(&pcd->lock);
++#ifdef VERBOSE
++		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x  gintmsk=%08x\n",
++						__func__,
++						dwc_read_reg32(&global_regs->gintsts),
++						dwc_read_reg32(&global_regs->gintmsk));
++#endif
++
++		gintr_status.d32 = dwc_otg_read_core_intr(core_if);
++
++/*
++		if (!gintr_status.d32) {
++			SPIN_UNLOCK(&pcd->lock);
++			return 0;
++		}
++*/
++		DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
++					__func__, gintr_status.d32);
++
++		if (gintr_status.b.sofintr) {
++			retval |= dwc_otg_pcd_handle_sof_intr(pcd);
++		}
++		if (gintr_status.b.rxstsqlvl) {
++			retval |= dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
++		}
++		if (gintr_status.b.nptxfempty) {
++			retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
++		}
++		if (gintr_status.b.ginnakeff) {
++			retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
++		}
++		if (gintr_status.b.goutnakeff) {
++			retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
++		}
++		if (gintr_status.b.i2cintr) {
++			retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
++		}
++		if (gintr_status.b.erlysuspend) {
++			retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
++		}
++		if (gintr_status.b.usbreset) {
++			retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
++		}
++		if (gintr_status.b.enumdone) {
++			retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
++		}
++		if (gintr_status.b.isooutdrop) {
++			retval |= dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(pcd);
++		}
++		if (gintr_status.b.eopframe) {
++			retval |= dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
++		}
++		if (gintr_status.b.epmismatch) {
++			retval |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if);
++		}
++		if (gintr_status.b.inepint) {
++			if(!core_if->multiproc_int_enable) {
++				retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++			}
++		}
++		if (gintr_status.b.outepintr) {
++			if(!core_if->multiproc_int_enable) {
++				retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++			}
++		}
++		if (gintr_status.b.incomplisoin) {
++			retval |= dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
++		}
++		if (gintr_status.b.incomplisoout) {
++			retval |= dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
++		}
++
++		/* In MPI mode De vice Endpoints intterrupts are asserted
++		 * without setting outepintr and inepint bits set, so these
++		 * Interrupt handlers are called without checking these bit-fields
++		 */
++		if(core_if->multiproc_int_enable) {
++			retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++			retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++		}
++#ifdef VERBOSE
++		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
++						dwc_read_reg32(&global_regs->gintsts));
++#endif
++		SPIN_UNLOCK(&pcd->lock);
++	}
++
++	S3C2410X_CLEAR_EINTPEND();
++
++	return retval;
++}
++
++#endif /* DWC_HOST_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_regs.h
+@@ -0,0 +1,2075 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1099526 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_REGS_H__
++#define __DWC_OTG_REGS_H__
++
++/**
++ * @file
++ *
++ * This file contains the data structures for accessing the DWC_otg core registers.
++ *
++ * The application interfaces with the HS OTG core by reading from and
++ * writing to the Control and Status Register (CSR) space through the
++ * AHB Slave interface. These registers are 32 bits wide, and the
++ * addresses are 32-bit-block aligned.
++ * CSRs are classified as follows:
++ * - Core Global Registers
++ * - Device Mode Registers
++ * - Device Global Registers
++ * - Device Endpoint Specific Registers
++ * - Host Mode Registers
++ * - Host Global Registers
++ * - Host Port CSRs
++ * - Host Channel Specific Registers
++ *
++ * Only the Core Global registers can be accessed in both Device and
++ * Host modes. When the HS OTG core is operating in one mode, either
++ * Device or Host, the application must not access registers from the
++ * other mode. When the core switches from one mode to another, the
++ * registers in the new mode of operation must be reprogrammed as they
++ * would be after a power-on reset.
++ */
++
++/** Maximum number of Periodic FIFOs */
++#define MAX_PERIO_FIFOS 15
++/** Maximum number of Transmit FIFOs */
++#define MAX_TX_FIFOS 15
++
++/** Maximum number of Endpoints/HostChannels */
++#define MAX_EPS_CHANNELS 16
++
++/****************************************************************************/
++/** DWC_otg Core registers .
++ * The dwc_otg_core_global_regs structure defines the size
++ * and relative field offsets for the Core Global registers.
++ */
++typedef struct dwc_otg_core_global_regs
++{
++	/** OTG Control and Status Register.  <i>Offset: 000h</i> */
++	volatile uint32_t gotgctl;
++	/** OTG Interrupt Register.	 <i>Offset: 004h</i> */
++	volatile uint32_t gotgint;
++	/**Core AHB Configuration Register.	 <i>Offset: 008h</i> */
++	volatile uint32_t gahbcfg;
++
++#define DWC_GLBINTRMASK		0x0001
++#define DWC_DMAENABLE		0x0020
++#define DWC_NPTXEMPTYLVL_EMPTY	0x0080
++#define DWC_NPTXEMPTYLVL_HALFEMPTY	0x0000
++#define DWC_PTXEMPTYLVL_EMPTY	0x0100
++#define DWC_PTXEMPTYLVL_HALFEMPTY	0x0000
++
++	/**Core USB Configuration Register.	 <i>Offset: 00Ch</i> */
++	volatile uint32_t gusbcfg;
++	/**Core Reset Register.	 <i>Offset: 010h</i> */
++	volatile uint32_t grstctl;
++	/**Core Interrupt Register.	 <i>Offset: 014h</i> */
++	volatile uint32_t gintsts;
++	/**Core Interrupt Mask Register.  <i>Offset: 018h</i> */
++	volatile uint32_t gintmsk;
++	/**Receive Status Queue Read Register (Read Only).	<i>Offset: 01Ch</i> */
++	volatile uint32_t grxstsr;
++	/**Receive Status Queue Read & POP Register (Read Only).  <i>Offset: 020h</i>*/
++	volatile uint32_t grxstsp;
++	/**Receive FIFO Size Register.	<i>Offset: 024h</i> */
++	volatile uint32_t grxfsiz;
++	/**Non Periodic Transmit FIFO Size Register.  <i>Offset: 028h</i> */
++	volatile uint32_t gnptxfsiz;
++	/**Non Periodic Transmit FIFO/Queue Status Register (Read
++	 * Only). <i>Offset: 02Ch</i> */
++	volatile uint32_t gnptxsts;
++	/**I2C Access Register.	 <i>Offset: 030h</i> */
++	volatile uint32_t gi2cctl;
++	/**PHY Vendor Control Register.	 <i>Offset: 034h</i> */
++	volatile uint32_t gpvndctl;
++	/**General Purpose Input/Output Register.  <i>Offset: 038h</i> */
++	volatile uint32_t ggpio;
++	/**User ID Register.  <i>Offset: 03Ch</i> */
++	volatile uint32_t guid;
++	/**Synopsys ID Register (Read Only).  <i>Offset: 040h</i> */
++	volatile uint32_t gsnpsid;
++	/**User HW Config1 Register (Read Only).  <i>Offset: 044h</i> */
++	volatile uint32_t ghwcfg1;
++	/**User HW Config2 Register (Read Only).  <i>Offset: 048h</i> */
++	volatile uint32_t ghwcfg2;
++#define DWC_SLAVE_ONLY_ARCH 0
++#define DWC_EXT_DMA_ARCH 1
++#define DWC_INT_DMA_ARCH 2
++
++#define DWC_MODE_HNP_SRP_CAPABLE	0
++#define DWC_MODE_SRP_ONLY_CAPABLE	1
++#define DWC_MODE_NO_HNP_SRP_CAPABLE		2
++#define DWC_MODE_SRP_CAPABLE_DEVICE		3
++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE	4
++#define DWC_MODE_SRP_CAPABLE_HOST	5
++#define DWC_MODE_NO_SRP_CAPABLE_HOST	6
++
++	/**User HW Config3 Register (Read Only).  <i>Offset: 04Ch</i> */
++	volatile uint32_t ghwcfg3;
++	/**User HW Config4 Register (Read Only).  <i>Offset: 050h</i>*/
++	volatile uint32_t ghwcfg4;
++	/** Reserved  <i>Offset: 054h-0FFh</i> */
++	volatile uint32_t reserved[43];
++	/** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
++	volatile uint32_t hptxfsiz;
++	/** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
++		otherwise Device Transmit FIFO#n Register.
++	 * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
++	volatile uint32_t dptxfsiz_dieptxf[15];
++} dwc_otg_core_global_regs_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Control
++ * and Status Register (GOTGCTL).  Set the bits using the bit
++ * fields then write the <i>d32</i> value to the register.
++ */
++typedef union gotgctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned sesreqscs : 1;
++		unsigned sesreq : 1;
++		unsigned reserved2_7 : 6;
++		unsigned hstnegscs : 1;
++		unsigned hnpreq : 1;
++		unsigned hstsethnpen : 1;
++		unsigned devhnpen : 1;
++		unsigned reserved12_15 : 4;
++		unsigned conidsts : 1;
++		unsigned reserved17 : 1;
++		unsigned asesvld : 1;
++		unsigned bsesvld : 1;
++		unsigned currmod : 1;
++		unsigned reserved21_31 : 11;
++	} b;
++} gotgctl_data_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Interrupt Register
++ * (GOTGINT).  Set/clear the bits using the bit fields then write the <i>d32</i>
++ * value to the register.
++ */
++typedef union gotgint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Current Mode */
++		unsigned reserved0_1 : 2;
++
++		/** Session End Detected */
++		unsigned sesenddet : 1;
++
++		unsigned reserved3_7 : 5;
++
++		/** Session Request Success Status Change */
++		unsigned sesreqsucstschng : 1;
++		/** Host Negotiation Success Status Change */
++		unsigned hstnegsucstschng : 1;
++
++		unsigned reserver10_16 : 7;
++
++		/** Host Negotiation Detected */
++		unsigned hstnegdet : 1;
++		/** A-Device Timeout Change */
++		unsigned adevtoutchng : 1;
++		/** Debounce Done */
++		unsigned debdone : 1;
++
++		unsigned reserved31_20 : 12;
++
++	} b;
++} gotgint_data_t;
++
++
++/**
++ * This union represents the bit fields of the Core AHB Configuration
++ * Register (GAHBCFG).	Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gahbcfg_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned glblintrmsk : 1;
++#define DWC_GAHBCFG_GLBINT_ENABLE		1
++
++		unsigned hburstlen : 4;
++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE	0
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR		1
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4		3
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8		5
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16	7
++
++		unsigned dmaenable : 1;
++#define DWC_GAHBCFG_DMAENABLE			1
++		unsigned reserved : 1;
++		unsigned nptxfemplvl_txfemplvl : 1;
++		unsigned ptxfemplvl : 1;
++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY		1
++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY	0
++		unsigned reserved9_31 : 23;
++	} b;
++} gahbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core USB Configuration
++ * Register (GUSBCFG).	Set the bits using the bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union gusbcfg_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned toutcal : 3;
++		unsigned phyif : 1;
++		unsigned ulpi_utmi_sel : 1;
++		unsigned fsintf : 1;
++		unsigned physel : 1;
++		unsigned ddrsel : 1;
++		unsigned srpcap : 1;
++		unsigned hnpcap : 1;
++		unsigned usbtrdtim : 4;
++		unsigned nptxfrwnden : 1;
++		unsigned phylpwrclksel : 1;
++		unsigned otgutmifssel : 1;
++		unsigned ulpi_fsls : 1;
++		unsigned ulpi_auto_res : 1;
++		unsigned ulpi_clk_sus_m : 1;
++		unsigned ulpi_ext_vbus_drv : 1;
++		unsigned ulpi_int_vbus_indicator : 1;
++		unsigned term_sel_dl_pulse : 1;
++		unsigned reserved23_27 : 5;
++		unsigned tx_end_delay : 1;
++		unsigned reserved29_31 : 3;
++	} b;
++} gusbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core Reset Register
++ * (GRSTCTL).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union grstctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Core Soft Reset (CSftRst) (Device and Host)
++		 *
++		 * The application can flush the control logic in the
++		 * entire core using this bit. This bit resets the
++		 * pipelines in the AHB Clock domain as well as the
++		 * PHY Clock domain.
++		 *
++		 * The state machines are reset to an IDLE state, the
++		 * control bits in the CSRs are cleared, all the
++		 * transmit FIFOs and the receive FIFO are flushed.
++		 *
++		 * The status mask bits that control the generation of
++		 * the interrupt, are cleared, to clear the
++		 * interrupt. The interrupt status bits are not
++		 * cleared, so the application can get the status of
++		 * any events that occurred in the core after it has
++		 * set this bit.
++		 *
++		 * Any transactions on the AHB are terminated as soon
++		 * as possible following the protocol. Any
++		 * transactions on the USB are terminated immediately.
++		 *
++		 * The configuration settings in the CSRs are
++		 * unchanged, so the software doesn't have to
++		 * reprogram these registers (Device
++		 * Configuration/Host Configuration/Core System
++		 * Configuration/Core PHY Configuration).
++		 *
++		 * The application can write to this bit, any time it
++		 * wants to reset the core. This is a self clearing
++		 * bit and the core clears this bit after all the
++		 * necessary logic is reset in the core, which may
++		 * take several clocks, depending on the current state
++		 * of the core.
++		 */
++		unsigned csftrst : 1;
++		/** Hclk Soft Reset
++		 *
++		 * The application uses this bit to reset the control logic in
++		 * the AHB clock domain. Only AHB clock domain pipelines are
++		 * reset.
++		 */
++		unsigned hsftrst : 1;
++		/** Host Frame Counter Reset (Host Only)<br>
++		 *
++		 * The application can reset the (micro)frame number
++		 * counter inside the core, using this bit. When the
++		 * (micro)frame counter is reset, the subsequent SOF
++		 * sent out by the core, will have a (micro)frame
++		 * number of 0.
++		 */
++		unsigned hstfrm : 1;
++		/** In Token Sequence Learning Queue Flush
++		 * (INTknQFlsh) (Device Only)
++		 */
++		unsigned intknqflsh : 1;
++		/** RxFIFO Flush (RxFFlsh) (Device and Host)
++		 *
++		 * The application can flush the entire Receive FIFO
++		 * using this bit.	<p>The application must first
++		 * ensure that the core is not in the middle of a
++		 * transaction.	 <p>The application should write into
++		 * this bit, only after making sure that neither the
++		 * DMA engine is reading from the RxFIFO nor the MAC
++		 * is writing the data in to the FIFO.	<p>The
++		 * application should wait until the bit is cleared
++		 * before performing any other operations. This bit
++		 * will takes 8 clocks (slowest of PHY or AHB clock)
++		 * to clear.
++		 */
++		unsigned rxfflsh : 1;
++		/** TxFIFO Flush (TxFFlsh) (Device and Host).
++		 *
++		 * This bit is used to selectively flush a single or
++		 * all transmit FIFOs.	The application must first
++		 * ensure that the core is not in the middle of a
++		 * transaction.	 <p>The application should write into
++		 * this bit, only after making sure that neither the
++		 * DMA engine is writing into the TxFIFO nor the MAC
++		 * is reading the data out of the FIFO.	 <p>The
++		 * application should wait until the core clears this
++		 * bit, before performing any operations. This bit
++		 * will takes 8 clocks (slowest of PHY or AHB clock)
++		 * to clear.
++		 */
++		unsigned txfflsh : 1;
++
++		/** TxFIFO Number (TxFNum) (Device and Host).
++		 *
++		 * This is the FIFO number which needs to be flushed,
++		 * using the TxFIFO Flush bit. This field should not
++		 * be changed until the TxFIFO Flush bit is cleared by
++		 * the core.
++		 *	 - 0x0 : Non Periodic TxFIFO Flush
++		 *	 - 0x1 : Periodic TxFIFO #1 Flush in device mode
++		 *	   or Periodic TxFIFO in host mode
++		 *	 - 0x2 : Periodic TxFIFO #2 Flush in device mode.
++		 *	 - ...
++		 *	 - 0xF : Periodic TxFIFO #15 Flush in device mode
++		 *	 - 0x10: Flush all the Transmit NonPeriodic and
++		 *	   Transmit Periodic FIFOs in the core
++		 */
++		unsigned txfnum : 5;
++		/** Reserved */
++		unsigned reserved11_29 : 19;
++		/** DMA Request Signal.	 Indicated DMA request is in
++		 * probress.  Used for debug purpose. */
++		unsigned dmareq : 1;
++		/** AHB Master Idle.  Indicates the AHB Master State
++		 * Machine is in IDLE condition. */
++		unsigned ahbidle : 1;
++	} b;
++} grstctl_t;
++
++
++/**
++ * This union represents the bit fields of the Core Interrupt Mask
++ * Register (GINTMSK).	Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gintmsk_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned reserved0 : 1;
++		unsigned modemismatch : 1;
++		unsigned otgintr : 1;
++		unsigned sofintr : 1;
++		unsigned rxstsqlvl : 1;
++		unsigned nptxfempty : 1;
++		unsigned ginnakeff : 1;
++		unsigned goutnakeff : 1;
++		unsigned reserved8 : 1;
++		unsigned i2cintr : 1;
++		unsigned erlysuspend : 1;
++		unsigned usbsuspend : 1;
++		unsigned usbreset : 1;
++		unsigned enumdone : 1;
++		unsigned isooutdrop : 1;
++		unsigned eopframe : 1;
++		unsigned reserved16 : 1;
++		unsigned epmismatch : 1;
++		unsigned inepintr : 1;
++		unsigned outepintr : 1;
++		unsigned incomplisoin : 1;
++		unsigned incomplisoout : 1;
++		unsigned reserved22_23 : 2;
++		unsigned portintr : 1;
++		unsigned hcintr : 1;
++		unsigned ptxfempty : 1;
++		unsigned reserved27 : 1;
++		unsigned conidstschng : 1;
++		unsigned disconnect : 1;
++		unsigned sessreqintr : 1;
++		unsigned wkupintr : 1;
++	} b;
++} gintmsk_data_t;
++/**
++ * This union represents the bit fields of the Core Interrupt Register
++ * (GINTSTS).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union gintsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++#define DWC_SOF_INTR_MASK 0x0008
++	/** register bits */
++	struct
++	{
++#define DWC_HOST_MODE 1
++		unsigned curmode : 1;
++		unsigned modemismatch : 1;
++		unsigned otgintr : 1;
++		unsigned sofintr : 1;
++		unsigned rxstsqlvl : 1;
++		unsigned nptxfempty : 1;
++		unsigned ginnakeff : 1;
++		unsigned goutnakeff : 1;
++		unsigned reserved8 : 1;
++		unsigned i2cintr : 1;
++		unsigned erlysuspend : 1;
++		unsigned usbsuspend : 1;
++		unsigned usbreset : 1;
++		unsigned enumdone : 1;
++		unsigned isooutdrop : 1;
++		unsigned eopframe : 1;
++		unsigned intokenrx : 1;
++		unsigned epmismatch : 1;
++		unsigned inepint: 1;
++		unsigned outepintr : 1;
++		unsigned incomplisoin : 1;
++		unsigned incomplisoout : 1;
++		unsigned reserved22_23 : 2;
++		unsigned portintr : 1;
++		unsigned hcintr : 1;
++		unsigned ptxfempty : 1;
++		unsigned reserved27 : 1;
++		unsigned conidstschng : 1;
++		unsigned disconnect : 1;
++		unsigned sessreqintr : 1;
++		unsigned wkupintr : 1;
++	} b;
++} gintsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union device_grxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned epnum : 4;
++		unsigned bcnt : 11;
++		unsigned dpid : 2;
++
++#define DWC_STS_DATA_UPDT		0x2				  // OUT Data Packet
++#define DWC_STS_XFER_COMP		0x3				  // OUT Data Transfer Complete
++
++#define DWC_DSTS_GOUT_NAK		0x1				  // Global OUT NAK
++#define DWC_DSTS_SETUP_COMP		0x4				  // Setup Phase Complete
++#define DWC_DSTS_SETUP_UPDT 0x6				  // SETUP Packet
++		unsigned pktsts : 4;
++		unsigned fn : 4;
++		unsigned reserved : 7;
++	} b;
++} device_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union host_grxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned chnum : 4;
++		unsigned bcnt : 11;
++		unsigned dpid : 2;
++
++		unsigned pktsts : 4;
++#define DWC_GRXSTS_PKTSTS_IN			  0x2
++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP	  0x3
++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
++#define DWC_GRXSTS_PKTSTS_CH_HALTED		  0x7
++
++		unsigned reserved : 11;
++	} b;
++} host_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element then
++ * read out the bits using the <i>b</i>it elements.
++ */
++typedef union fifosize_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned startaddr : 16;
++		unsigned depth : 16;
++	} b;
++} fifosize_data_t;
++
++/**
++ * This union represents the bit fields in the Non-Periodic Transmit
++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union gnptxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned nptxfspcavail : 16;
++		unsigned nptxqspcavail : 8;
++		/** Top of the Non-Periodic Transmit Request Queue
++		 *	- bit 24 - Terminate (Last entry for the selected
++		 *	  channel/EP)
++		 *	- bits 26:25 - Token Type
++		 *	  - 2'b00 - IN/OUT
++		 *	  - 2'b01 - Zero Length OUT
++		 *	  - 2'b10 - PING/Complete Split
++		 *	  - 2'b11 - Channel Halt
++		 *	- bits 30:27 - Channel/EP Number
++		 */
++		unsigned nptxqtop_terminate : 1;
++		unsigned nptxqtop_token : 2;
++		unsigned nptxqtop_chnep : 4;
++		unsigned reserved : 1;
++	} b;
++} gnptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Transmit
++ * FIFO Status Register (DTXFSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union dtxfsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned txfspcavail : 16;
++		unsigned reserved : 16;
++	} b;
++} dtxfsts_data_t;
++
++/**
++ * This union represents the bit fields in the I2C Control Register
++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gi2cctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned rwdata : 8;
++		unsigned regaddr : 8;
++		unsigned addr : 7;
++		unsigned i2cen : 1;
++		unsigned ack : 1;
++		unsigned i2csuspctl : 1;
++		unsigned i2cdevaddr : 2;
++		unsigned reserved : 2;
++		unsigned rw : 1;
++		unsigned bsydne : 1;
++	} b;
++} gi2cctl_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config1
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg1_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned ep_dir0 : 2;
++		unsigned ep_dir1 : 2;
++		unsigned ep_dir2 : 2;
++		unsigned ep_dir3 : 2;
++		unsigned ep_dir4 : 2;
++		unsigned ep_dir5 : 2;
++		unsigned ep_dir6 : 2;
++		unsigned ep_dir7 : 2;
++		unsigned ep_dir8 : 2;
++		unsigned ep_dir9 : 2;
++		unsigned ep_dir10 : 2;
++		unsigned ep_dir11 : 2;
++		unsigned ep_dir12 : 2;
++		unsigned ep_dir13 : 2;
++		unsigned ep_dir14 : 2;
++		unsigned ep_dir15 : 2;
++	} b;
++} hwcfg1_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config2
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg2_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/* GHWCFG2 */
++		unsigned op_mode : 3;
++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
++
++		unsigned architecture : 2;
++		unsigned point2point : 1;
++		unsigned hs_phy_type : 2;
++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
++
++		unsigned fs_phy_type : 2;
++		unsigned num_dev_ep : 4;
++		unsigned num_host_chan : 4;
++		unsigned perio_ep_supported : 1;
++		unsigned dynamic_fifo : 1;
++		unsigned multi_proc_int : 1;
++		unsigned reserved21 : 1;
++		unsigned nonperio_tx_q_depth : 2;
++		unsigned host_perio_tx_q_depth : 2;
++		unsigned dev_token_q_depth : 5;
++		unsigned reserved31 : 1;
++	} b;
++} hwcfg2_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config3
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg3_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/* GHWCFG3 */
++		unsigned xfer_size_cntr_width : 4;
++		unsigned packet_size_cntr_width : 3;
++		unsigned otg_func : 1;
++		unsigned i2c : 1;
++		unsigned vendor_ctrl_if : 1;
++		unsigned optional_features : 1;
++		unsigned synch_reset_type : 1;
++		unsigned ahb_phy_clock_synch : 1;
++		unsigned reserved15_13 : 3;
++		unsigned dfifo_depth : 16;
++	} b;
++} hwcfg3_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config4
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned num_dev_perio_in_ep : 4;
++		unsigned power_optimiz : 1;
++		unsigned min_ahb_freq : 9;
++		unsigned utmi_phy_data_width : 2;
++		unsigned num_dev_mode_ctrl_ep : 4;
++		unsigned iddig_filt_en : 1;
++		unsigned vbus_valid_filt_en : 1;
++		unsigned a_valid_filt_en : 1;
++		unsigned b_valid_filt_en : 1;
++		unsigned session_end_filt_en : 1;
++		unsigned ded_fifo_en : 1;
++		unsigned num_in_eps : 4;
++		unsigned desc_dma : 1;
++		unsigned desc_dma_dyn : 1;
++	} b;
++} hwcfg4_data_t;
++
++////////////////////////////////////////////
++// Device Registers
++/**
++ * Device Global Registers. <i>Offsets 800h-BFFh</i>
++ *
++ * The following structures define the size and relative field offsets
++ * for the Device Mode Registers.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_global_regs
++{
++	/** Device Configuration Register. <i>Offset 800h</i> */
++	volatile uint32_t dcfg;
++	/** Device Control Register. <i>Offset: 804h</i> */
++	volatile uint32_t dctl;
++	/** Device Status Register (Read Only). <i>Offset: 808h</i> */
++	volatile uint32_t dsts;
++	/** Reserved. <i>Offset: 80Ch</i> */
++	uint32_t unused;
++	/** Device IN Endpoint Common Interrupt Mask
++	 * Register. <i>Offset: 810h</i> */
++	volatile uint32_t diepmsk;
++	/** Device OUT Endpoint Common Interrupt Mask
++	 * Register. <i>Offset: 814h</i> */
++	volatile uint32_t doepmsk;
++	/** Device All Endpoints Interrupt Register.  <i>Offset: 818h</i> */
++	volatile uint32_t daint;
++	/** Device All Endpoints Interrupt Mask Register.  <i>Offset:
++	 * 81Ch</i> */
++	volatile uint32_t daintmsk;
++	/** Device IN Token Queue Read Register-1 (Read Only).
++	 * <i>Offset: 820h</i> */
++	volatile uint32_t dtknqr1;
++	/** Device IN Token Queue Read Register-2 (Read Only).
++	 * <i>Offset: 824h</i> */
++	volatile uint32_t dtknqr2;
++	/** Device VBUS	 discharge Register.  <i>Offset: 828h</i> */
++	volatile uint32_t dvbusdis;
++	/** Device VBUS Pulse Register.	 <i>Offset: 82Ch</i> */
++	volatile uint32_t dvbuspulse;
++	/** Device IN Token Queue Read Register-3 (Read Only). /
++	 *	Device Thresholding control register (Read/Write)
++	 * <i>Offset: 830h</i> */
++	volatile uint32_t dtknqr3_dthrctl;
++	/** Device IN Token Queue Read Register-4 (Read Only). /
++	 *	Device IN EPs empty Inr. Mask Register (Read/Write)
++	 * <i>Offset: 834h</i> */
++	volatile uint32_t dtknqr4_fifoemptymsk;
++	/** Device Each Endpoint Interrupt Register (Read Only). /
++	 * <i>Offset: 838h</i> */
++	volatile uint32_t deachint;
++	/** Device Each Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 83Ch</i> */
++	volatile uint32_t deachintmsk;
++	/** Device Each In Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 840h</i> */
++	volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
++	/** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 880h</i> */
++	volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
++} dwc_otg_device_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Device Configuration
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.  Write the
++ * <i>d32</i> member to the dcfg register.
++ */
++typedef union dcfg_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Device Speed */
++		unsigned devspd : 2;
++		/** Non Zero Length Status OUT Handshake */
++		unsigned nzstsouthshk : 1;
++#define DWC_DCFG_SEND_STALL 1
++
++		unsigned reserved3 : 1;
++		/** Device Addresses */
++		unsigned devaddr : 7;
++		/** Periodic Frame Interval */
++		unsigned perfrint : 2;
++#define DWC_DCFG_FRAME_INTERVAL_80 0
++#define DWC_DCFG_FRAME_INTERVAL_85 1
++#define DWC_DCFG_FRAME_INTERVAL_90 2
++#define DWC_DCFG_FRAME_INTERVAL_95 3
++
++		unsigned reserved13_17 : 5;
++		/** In Endpoint Mis-match count */
++		unsigned epmscnt : 5;
++		/** Enable Descriptor DMA in Device mode */
++		unsigned descdma : 1;
++	} b;
++} dcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Device Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Remote Wakeup */
++		unsigned rmtwkupsig : 1;
++		/** Soft Disconnect */
++		unsigned sftdiscon : 1;
++		/** Global Non-Periodic IN NAK Status */
++		unsigned gnpinnaksts : 1;
++		/** Global OUT NAK Status */
++		unsigned goutnaksts : 1;
++		/** Test Control */
++		unsigned tstctl : 3;
++		/** Set Global Non-Periodic IN NAK */
++		unsigned sgnpinnak : 1;
++		/** Clear Global Non-Periodic IN NAK */
++		unsigned cgnpinnak : 1;
++		/** Set Global OUT NAK */
++		unsigned sgoutnak : 1;
++		/** Clear Global OUT NAK */
++		unsigned cgoutnak : 1;
++
++		/** Power-On Programming Done */
++		unsigned pwronprgdone : 1;
++		/** Global Continue on BNA */
++		unsigned gcontbna : 1;
++		/** Global Multi Count */
++		unsigned gmc : 2;
++		/** Ignore Frame Number for ISOC EPs */
++		unsigned ifrmnum : 1;
++		/** NAK on Babble */
++		unsigned nakonbble : 1;
++
++		unsigned reserved16_31 : 16;
++	} b;
++} dctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device Status
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Suspend Status */
++		unsigned suspsts : 1;
++		/** Enumerated Speed */
++		unsigned enumspd : 2;
++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ		   2
++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ		   3
++		/** Erratic Error */
++		unsigned errticerr : 1;
++		unsigned reserved4_7: 4;
++		/** Frame or Microframe Number of the received SOF */
++		unsigned soffn : 14;
++		unsigned reserved22_31 : 10;
++	} b;
++} dsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device IN EP Interrupt
++ * Register and the Device IN EP Common Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union diepint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Transfer complete mask */
++		unsigned xfercompl : 1;
++		/** Endpoint disable mask */
++		unsigned epdisabled : 1;
++		/** AHB Error mask */
++		unsigned ahberr : 1;
++		/** TimeOUT Handshake mask (non-ISOC EPs) */
++		unsigned timeout : 1;
++		/** IN Token received with TxF Empty mask */
++		unsigned intktxfemp : 1;
++		/** IN Token Received with EP mismatch mask */
++		unsigned intknepmis : 1;
++		/** IN Endpoint HAK Effective mask */
++		unsigned inepnakeff : 1;
++		/** IN Endpoint HAK Effective mask */
++		unsigned emptyintr : 1;
++
++		unsigned txfifoundrn : 1;
++
++		/** BNA Interrupt mask */
++		unsigned bna : 1;
++
++		unsigned reserved10_12 : 3;
++		/** BNA Interrupt mask */
++		unsigned nak : 1;
++
++		unsigned reserved14_31 : 18;
++		} b;
++} diepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union diepint_data diepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP Interrupt
++ * Registerand Device OUT EP Common Interrupt Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union doepint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Transfer complete */
++		unsigned xfercompl : 1;
++		/** Endpoint disable  */
++		unsigned epdisabled : 1;
++		/** AHB Error */
++		unsigned ahberr : 1;
++		/** Setup Phase Done (contorl EPs) */
++		unsigned setup : 1;
++		/** OUT Token Received when Endpoint Disabled */
++		unsigned outtknepdis : 1;
++
++		unsigned stsphsercvd : 1;
++		/** Back-to-Back SETUP Packets Received */
++		unsigned back2backsetup : 1;
++
++		unsigned reserved7 : 1;
++		/** OUT packet Error */
++		unsigned outpkterr : 1;
++		/** BNA Interrupt */
++		unsigned bna : 1;
++
++		unsigned reserved10 : 1;
++		/** Packet Drop Status */
++		unsigned pktdrpsts : 1;
++		/** Babble Interrupt */
++		unsigned babble : 1;
++		/** NAK Interrupt */
++		unsigned nak : 1;
++		/** NYET Interrupt */
++		unsigned nyet : 1;
++
++		unsigned reserved15_31 : 17;
++	} b;
++} doepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union doepint_data doepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device All EP Interrupt
++ * and Mask Registers.
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union daint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** IN Endpoint bits */
++		unsigned in : 16;
++		/** OUT Endpoint bits */
++		unsigned out : 16;
++	} ep;
++	struct
++	{
++		/** IN Endpoint bits */
++		unsigned inep0	: 1;
++		unsigned inep1	: 1;
++		unsigned inep2	: 1;
++		unsigned inep3	: 1;
++		unsigned inep4	: 1;
++		unsigned inep5	: 1;
++		unsigned inep6	: 1;
++		unsigned inep7	: 1;
++		unsigned inep8	: 1;
++		unsigned inep9	: 1;
++		unsigned inep10 : 1;
++		unsigned inep11 : 1;
++		unsigned inep12 : 1;
++		unsigned inep13 : 1;
++		unsigned inep14 : 1;
++		unsigned inep15 : 1;
++		/** OUT Endpoint bits */
++		unsigned outep0	 : 1;
++		unsigned outep1	 : 1;
++		unsigned outep2	 : 1;
++		unsigned outep3	 : 1;
++		unsigned outep4	 : 1;
++		unsigned outep5	 : 1;
++		unsigned outep6	 : 1;
++		unsigned outep7	 : 1;
++		unsigned outep8	 : 1;
++		unsigned outep9	 : 1;
++		unsigned outep10 : 1;
++		unsigned outep11 : 1;
++		unsigned outep12 : 1;
++		unsigned outep13 : 1;
++		unsigned outep14 : 1;
++		unsigned outep15 : 1;
++	} b;
++} daint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN Token Queue
++ * Read Registers.
++ * - Read the register into the <i>d32</i> member.
++ * - READ-ONLY Register
++ */
++typedef union dtknq1_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** In Token Queue Write Pointer */
++		unsigned intknwptr : 5;
++		/** Reserved */
++		unsigned reserved05_06 : 2;
++		/** write pointer has wrapped. */
++		unsigned wrap_bit : 1;
++		/** EP Numbers of IN Tokens 0 ... 4 */
++		unsigned epnums0_5 : 24;
++	}b;
++} dtknq1_data_t;
++
++/**
++ * This union represents Threshold control Register
++ * - Read and write the register into the <i>d32</i> member.
++ * - READ-WRITABLE Register
++ */
++typedef union dthrctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** non ISO Tx Thr. Enable */
++		unsigned non_iso_thr_en : 1;
++		/** ISO Tx Thr. Enable */
++		unsigned iso_thr_en : 1;
++		/** Tx Thr. Length */
++		unsigned tx_thr_len : 9;
++		/** Reserved */
++		unsigned reserved11_15 : 5;
++		/** Rx Thr. Enable */
++		unsigned rx_thr_en : 1;
++		/** Rx Thr. Length */
++		unsigned rx_thr_len : 9;
++		/** Reserved */
++		unsigned reserved26_31 : 6;
++	}b;
++} dthrctl_data_t;
++
++
++/**
++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
++ * 900h-AFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_in_ep_regs
++{
++	/** Device IN Endpoint Control Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 00h</i> */
++	volatile uint32_t diepctl;
++	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
++	uint32_t reserved04;
++	/** Device IN Endpoint Interrupt Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 08h</i> */
++	volatile uint32_t diepint;
++	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
++	uint32_t reserved0C;
++	/** Device IN Endpoint Transfer Size
++	 * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
++	volatile uint32_t dieptsiz;
++	/** Device IN Endpoint DMA Address Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 14h</i> */
++	volatile uint32_t diepdma;
++	/** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 18h</i> */
++	volatile uint32_t dtxfsts;
++	/** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 1Ch</i> */
++	volatile uint32_t diepdmab;
++} dwc_otg_dev_in_ep_regs_t;
++
++/**
++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
++ * B00h-CFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_out_ep_regs
++{
++	/** Device OUT Endpoint Control Register. <i>Offset:B00h +
++	 * (ep_num * 20h) + 00h</i> */
++	volatile uint32_t doepctl;
++	/** Device OUT Endpoint Frame number Register.	<i>Offset:
++	 * B00h + (ep_num * 20h) + 04h</i> */
++	volatile uint32_t doepfn;
++	/** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
++	 * (ep_num * 20h) + 08h</i> */
++	volatile uint32_t doepint;
++	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
++	uint32_t reserved0C;
++	/** Device OUT Endpoint Transfer Size Register. <i>Offset:
++	 * B00h + (ep_num * 20h) + 10h</i> */
++	volatile uint32_t doeptsiz;
++	/** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
++	 * + (ep_num * 20h) + 14h</i> */
++	volatile uint32_t doepdma;
++	/** Reserved. <i>Offset:B00h + 	 * (ep_num * 20h) + 1Ch</i> */
++	uint32_t unused;
++	/** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
++	 * + (ep_num * 20h) + 1Ch</i> */
++	uint32_t doepdmab;
++} dwc_otg_dev_out_ep_regs_t;
++
++/**
++ * This union represents the bit fields in the Device EP Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union depctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Maximum Packet Size
++		 * IN/OUT EPn
++		 * IN/OUT EP0 - 2 bits
++		 *	 2'b00: 64 Bytes
++		 *	 2'b01: 32
++		 *	 2'b10: 16
++		 *	 2'b11: 8 */
++		unsigned mps : 11;
++#define DWC_DEP0CTL_MPS_64	 0
++#define DWC_DEP0CTL_MPS_32	 1
++#define DWC_DEP0CTL_MPS_16	 2
++#define DWC_DEP0CTL_MPS_8	 3
++
++		/** Next Endpoint
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned nextep : 4;
++
++		/** USB Active Endpoint */
++		unsigned usbactep : 1;
++
++		/** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
++		 * This field contains the PID of the packet going to
++		 * be received or transmitted on this endpoint. The
++		 * application should program the PID of the first
++		 * packet going to be received or transmitted on this
++		 * endpoint , after the endpoint is
++		 * activated. Application use the SetD1PID and
++		 * SetD0PID fields of this register to program either
++		 * D0 or D1 PID.
++		 *
++		 * The encoding for this field is
++		 *	 - 0: D0
++		 *	 - 1: D1
++		 */
++		unsigned dpid : 1;
++
++		/** NAK Status */
++		unsigned naksts : 1;
++
++		/** Endpoint Type
++		 *	2'b00: Control
++		 *	2'b01: Isochronous
++		 *	2'b10: Bulk
++		 *	2'b11: Interrupt */
++		unsigned eptype : 2;
++
++		/** Snoop Mode
++		 * OUT EPn/OUT EP0
++		 * IN EPn/IN EP0 - reserved */
++		unsigned snp : 1;
++
++		/** Stall Handshake */
++		unsigned stall : 1;
++
++		/** Tx Fifo Number
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned txfnum : 4;
++
++		/** Clear NAK */
++		unsigned cnak : 1;
++		/** Set NAK */
++		unsigned snak : 1;
++		/** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
++		 * Writing to this field sets the Endpoint DPID (DPID)
++		 * field in this register to DATA0. Set Even
++		 * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
++		 * Writing to this field sets the Even/Odd
++		 * (micro)frame (EO_FrNum) field to even (micro)
++		 * frame.
++		 */
++		unsigned setd0pid : 1;
++		/** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
++		 * Writing to this field sets the Endpoint DPID (DPID)
++		 * field in this register to DATA1 Set Odd
++		 * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
++		 * Writing to this field sets the Even/Odd
++		 * (micro)frame (EO_FrNum) field to odd (micro) frame.
++		 */
++		unsigned setd1pid : 1;
++
++		/** Endpoint Disable */
++		unsigned epdis : 1;
++		/** Endpoint Enable */
++		unsigned epena : 1;
++		} b;
++} depctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz_data
++{
++		/** raw register data */
++		uint32_t d32;
++		/** register bits */
++		struct {
++		/** Transfer size */
++		unsigned xfersize : 19;
++		/** Packet Count */
++		unsigned pktcnt : 10;
++		/** Multi Count - Periodic IN endpoints */
++		unsigned mc : 2;
++		unsigned reserved : 1;
++		} b;
++} deptsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP 0 Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz0_data
++{
++		/** raw register data */
++		uint32_t d32;
++		/** register bits */
++		struct {
++		/** Transfer size */
++		unsigned xfersize : 7;
++				/** Reserved */
++				unsigned reserved7_18 : 12;
++		/** Packet Count */
++		unsigned pktcnt : 1;
++				/** Reserved */
++		unsigned reserved20_28 : 9;
++				/**Setup Packet Count (DOEPTSIZ0 Only) */
++				unsigned supcnt : 2;
++				unsigned reserved31;
++		} b;
++} deptsiz0_data_t;
++
++
++/////////////////////////////////////////////////
++// DMA Descriptor Specific Structures
++//
++
++/** Buffer status definitions */
++
++#define BS_HOST_READY	0x0
++#define BS_DMA_BUSY		0x1
++#define BS_DMA_DONE		0x2
++#define BS_HOST_BUSY	0x3
++
++/** Receive/Transmit status definitions */
++
++#define RTS_SUCCESS		0x0
++#define RTS_BUFFLUSH	0x1
++#define RTS_RESERVED	0x2
++#define RTS_BUFERR		0x3
++
++
++/**
++ * This union represents the bit fields in the DMA Descriptor
++ * status quadlet. Read the quadlet into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
++ * <i>b_iso_in</i> elements.
++ */
++typedef union desc_sts_data
++{
++		/** raw register data */
++		uint32_t d32;
++		/** quadlet bits */
++		struct {
++		/** Received number of bytes */
++		unsigned bytes : 16;
++
++		unsigned reserved16_22 : 7;
++		/** Multiple Transfer - only for OUT EPs */
++		unsigned mtrf : 1;
++		/** Setup Packet received - only for OUT EPs */
++		unsigned sr : 1;
++		/** Interrupt On Complete */
++		unsigned ioc : 1;
++		/** Short Packet */
++		unsigned sp : 1;
++		/** Last */
++		unsigned l : 1;
++		/** Receive Status */
++		unsigned sts : 2;
++		/** Buffer Status */
++		unsigned bs : 2;
++		} b;
++
++#ifdef DWC_EN_ISOC
++		/** iso out quadlet bits */
++		struct {
++		/** Received number of bytes */
++		unsigned rxbytes : 11;
++
++		unsigned reserved11 : 1;
++		/** Frame Number */
++		unsigned framenum : 11;
++		/** Received ISO Data PID */
++		unsigned pid : 2;
++		/** Interrupt On Complete */
++		unsigned ioc : 1;
++		/** Short Packet */
++		unsigned sp : 1;
++		/** Last */
++		unsigned l : 1;
++		/** Receive Status */
++		unsigned rxsts : 2;
++		/** Buffer Status */
++		unsigned bs : 2;
++		} b_iso_out;
++
++		/** iso in quadlet bits */
++		struct {
++		/** Transmited number of bytes */
++		unsigned txbytes : 12;
++		/** Frame Number */
++		unsigned framenum : 11;
++		/** Transmited ISO Data PID */
++		unsigned pid : 2;
++		/** Interrupt On Complete */
++		unsigned ioc : 1;
++		/** Short Packet */
++		unsigned sp : 1;
++		/** Last */
++		unsigned l : 1;
++		/** Transmit Status */
++		unsigned txsts : 2;
++		/** Buffer Status */
++		unsigned bs : 2;
++		} b_iso_in;
++#endif //DWC_EN_ISOC
++} desc_sts_data_t;
++
++/**
++ * DMA Descriptor structure
++ *
++ * DMA Descriptor structure contains two quadlets:
++ * Status quadlet and Data buffer pointer.
++ */
++typedef struct dwc_otg_dma_desc
++{
++	/** DMA Descriptor status quadlet */
++	desc_sts_data_t	status;
++	/** DMA Descriptor data buffer pointer */
++ 	dma_addr_t	buf;
++} dwc_otg_dma_desc_t;
++
++/**
++ * The dwc_otg_dev_if structure contains information needed to manage
++ * the DWC_otg controller acting in device mode. It represents the
++ * programming view of the device-specific aspects of the controller.
++ */
++typedef struct dwc_otg_dev_if
++{
++	/** Pointer to device Global registers.
++	 * Device Global Registers starting at offset 800h
++	 */
++	dwc_otg_device_global_regs_t *dev_global_regs;
++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
++
++	/**
++	 * Device Logical IN Endpoint-Specific Registers 900h-AFCh
++	 */
++	dwc_otg_dev_in_ep_regs_t	 *in_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_IN_EP_REG_OFFSET 0x900
++#define DWC_EP_REG_OFFSET 0x20
++
++	/** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++	dwc_otg_dev_out_ep_regs_t	 *out_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
++
++	/* Device configuration information*/
++	uint8_t	 speed;				 /**< Device Speed	0: Unknown, 1: LS, 2:FS, 3: HS */
++	uint8_t	 num_in_eps;		 /**< Number # of Tx EP range: 0-15 exept ep0 */
++	uint8_t	 num_out_eps;		 /**< Number # of Rx EP range: 0-15 exept ep 0*/
++
++	/** Size of periodic FIFOs (Bytes) */
++	uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
++
++	/** Size of Tx FIFOs (Bytes) */
++	uint16_t tx_fifo_size[MAX_TX_FIFOS];
++
++	/** Thresholding enable flags and length varaiables **/
++	uint16_t rx_thr_en;
++	uint16_t iso_tx_thr_en;
++	uint16_t non_iso_tx_thr_en;
++
++	uint16_t rx_thr_length;
++	uint16_t tx_thr_length;
++
++	/**
++	 * Pointers to the DMA Descriptors for EP0 Control
++	 * transfers (virtual and physical)
++	 */
++
++	/** 2 descriptors for SETUP packets */
++	uint32_t dma_setup_desc_addr[2];
++	dwc_otg_dma_desc_t* setup_desc_addr[2];
++
++	/** Pointer to Descriptor with latest SETUP packet */
++	dwc_otg_dma_desc_t* psetup;
++
++	/** Index of current SETUP handler descriptor */
++	uint32_t setup_desc_index;
++
++	/** Descriptor for Data In or Status In phases */
++	uint32_t dma_in_desc_addr;
++	dwc_otg_dma_desc_t* in_desc_addr;;
++
++	/** Descriptor for Data Out or Status Out phases */
++	uint32_t dma_out_desc_addr;
++	dwc_otg_dma_desc_t* out_desc_addr;
++
++} dwc_otg_dev_if_t;
++
++
++
++
++/////////////////////////////////////////////////
++// Host Mode Register Structures
++//
++/**
++ * The Host Global Registers structure defines the size and relative
++ * field offsets for the Host Mode Global Registers.  Host Global
++ * Registers offsets 400h-7FFh.
++*/
++typedef struct dwc_otg_host_global_regs
++{
++	/** Host Configuration Register.   <i>Offset: 400h</i> */
++	volatile uint32_t hcfg;
++	/** Host Frame Interval Register.	<i>Offset: 404h</i> */
++	volatile uint32_t hfir;
++	/** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
++	volatile uint32_t hfnum;
++	/** Reserved.	<i>Offset: 40Ch</i> */
++	uint32_t reserved40C;
++	/** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
++	volatile uint32_t hptxsts;
++	/** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
++	volatile uint32_t haint;
++	/** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
++	volatile uint32_t haintmsk;
++} dwc_otg_host_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Configuration Register.
++ * Read the register into the <i>d32</i> member then set/clear the bits using
++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
++ */
++typedef union hcfg_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		/** FS/LS Phy Clock Select */
++		unsigned fslspclksel : 2;
++#define DWC_HCFG_30_60_MHZ 0
++#define DWC_HCFG_48_MHZ	   1
++#define DWC_HCFG_6_MHZ	   2
++
++		/** FS/LS Only Support */
++		unsigned fslssupp : 1;
++		} b;
++} hcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfir_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		unsigned frint : 16;
++		unsigned reserved : 16;
++	} b;
++} hfir_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfnum_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		unsigned frnum : 16;
++#define DWC_HFNUM_MAX_FRNUM 0x3FFF
++		unsigned frrem : 16;
++	} b;
++} hfnum_data_t;
++
++typedef union hptxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		unsigned ptxfspcavail : 16;
++		unsigned ptxqspcavail : 8;
++		/** Top of the Periodic Transmit Request Queue
++		 *	- bit 24 - Terminate (last entry for the selected channel)
++		 *	- bits 26:25 - Token Type
++		 *	  - 2'b00 - Zero length
++		 *	  - 2'b01 - Ping
++		 *	  - 2'b10 - Disable
++		 *	- bits 30:27 - Channel Number
++		 *	- bit 31 - Odd/even microframe
++		 */
++		unsigned ptxqtop_terminate : 1;
++		unsigned ptxqtop_token : 2;
++		unsigned ptxqtop_chnum : 4;
++		unsigned ptxqtop_odd : 1;
++	} b;
++} hptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Port Control and Status
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hprt0 register.
++ */
++typedef union hprt0_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned prtconnsts : 1;
++		unsigned prtconndet : 1;
++		unsigned prtena : 1;
++		unsigned prtenchng : 1;
++		unsigned prtovrcurract : 1;
++		unsigned prtovrcurrchng : 1;
++		unsigned prtres : 1;
++		unsigned prtsusp : 1;
++		unsigned prtrst : 1;
++		unsigned reserved9 : 1;
++		unsigned prtlnsts : 2;
++		unsigned prtpwr : 1;
++		unsigned prttstctl : 4;
++		unsigned prtspd : 2;
++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
++#define DWC_HPRT0_PRTSPD_LOW_SPEED	2
++		unsigned reserved19_31 : 13;
++	} b;
++} hprt0_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned ch0 : 1;
++		unsigned ch1 : 1;
++		unsigned ch2 : 1;
++		unsigned ch3 : 1;
++		unsigned ch4 : 1;
++		unsigned ch5 : 1;
++		unsigned ch6 : 1;
++		unsigned ch7 : 1;
++		unsigned ch8 : 1;
++		unsigned ch9 : 1;
++		unsigned ch10 : 1;
++		unsigned ch11 : 1;
++		unsigned ch12 : 1;
++		unsigned ch13 : 1;
++		unsigned ch14 : 1;
++		unsigned ch15 : 1;
++		unsigned reserved : 16;
++	} b;
++
++	struct
++	{
++		unsigned chint : 16;
++		unsigned reserved : 16;
++	} b2;
++} haint_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haintmsk_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned ch0 : 1;
++		unsigned ch1 : 1;
++		unsigned ch2 : 1;
++		unsigned ch3 : 1;
++		unsigned ch4 : 1;
++		unsigned ch5 : 1;
++		unsigned ch6 : 1;
++		unsigned ch7 : 1;
++		unsigned ch8 : 1;
++		unsigned ch9 : 1;
++		unsigned ch10 : 1;
++		unsigned ch11 : 1;
++		unsigned ch12 : 1;
++		unsigned ch13 : 1;
++		unsigned ch14 : 1;
++		unsigned ch15 : 1;
++		unsigned reserved : 16;
++	} b;
++
++	struct
++	{
++		unsigned chint : 16;
++		unsigned reserved : 16;
++	} b2;
++} haintmsk_data_t;
++
++/**
++ * Host Channel Specific Registers. <i>500h-5FCh</i>
++ */
++typedef struct dwc_otg_hc_regs
++{
++	/** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
++	volatile uint32_t hcchar;
++	/** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
++	volatile uint32_t hcsplt;
++	/** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
++	volatile uint32_t hcint;
++	/** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
++	volatile uint32_t hcintmsk;
++	/** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
++	volatile uint32_t hctsiz;
++	/** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
++	volatile uint32_t hcdma;
++	/** Reserved.  <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
++	uint32_t reserved[2];
++} dwc_otg_hc_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Characteristics
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hcchar_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		/** Maximum packet size in bytes */
++		unsigned mps : 11;
++
++		/** Endpoint number */
++		unsigned epnum : 4;
++
++		/** 0: OUT, 1: IN */
++		unsigned epdir : 1;
++
++		unsigned reserved : 1;
++
++		/** 0: Full/high speed device, 1: Low speed device */
++		unsigned lspddev : 1;
++
++		/** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++		unsigned eptype : 2;
++
++		/** Packets per frame for periodic transfers. 0 is reserved. */
++		unsigned multicnt : 2;
++
++		/** Device address */
++		unsigned devaddr : 7;
++
++		/**
++		 * Frame to transmit periodic transaction.
++		 * 0: even, 1: odd
++		 */
++		unsigned oddfrm : 1;
++
++		/** Channel disable */
++		unsigned chdis : 1;
++
++		/** Channel enable */
++		unsigned chen : 1;
++	} b;
++} hcchar_data_t;
++
++typedef union hcsplt_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		/** Port Address */
++		unsigned prtaddr : 7;
++
++		/** Hub Address */
++		unsigned hubaddr : 7;
++
++		/** Transaction Position */
++		unsigned xactpos : 2;
++#define DWC_HCSPLIT_XACTPOS_MID 0
++#define DWC_HCSPLIT_XACTPOS_END 1
++#define DWC_HCSPLIT_XACTPOS_BEGIN 2
++#define DWC_HCSPLIT_XACTPOS_ALL 3
++
++		/** Do Complete Split */
++		unsigned compsplt : 1;
++
++		/** Reserved */
++		unsigned reserved : 14;
++
++		/** Split Enble */
++		unsigned spltena : 1;
++	} b;
++} hcsplt_data_t;
++
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union hcint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Transfer Complete */
++		unsigned xfercomp : 1;
++		/** Channel Halted */
++		unsigned chhltd : 1;
++		/** AHB Error */
++		unsigned ahberr : 1;
++		/** STALL Response Received */
++		unsigned stall : 1;
++		/** NAK Response Received */
++		unsigned nak : 1;
++		/** ACK Response Received */
++		unsigned ack : 1;
++		/** NYET Response Received */
++		unsigned nyet : 1;
++		/** Transaction Err */
++		unsigned xacterr : 1;
++		/** Babble Error */
++		unsigned bblerr : 1;
++		/** Frame Overrun */
++		unsigned frmovrun : 1;
++		/** Data Toggle Error */
++		unsigned datatglerr : 1;
++		/** Reserved */
++		unsigned reserved : 21;
++	} b;
++} hcint_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Transfer Size
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hctsiz_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		/** Total transfer size in bytes */
++		unsigned xfersize : 19;
++
++		/** Data packets to transfer */
++		unsigned pktcnt : 10;
++
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control), SETUP (Control)
++		 */
++		unsigned pid : 2;
++#define DWC_HCTSIZ_DATA0 0
++#define DWC_HCTSIZ_DATA1 2
++#define DWC_HCTSIZ_DATA2 1
++#define DWC_HCTSIZ_MDATA 3
++#define DWC_HCTSIZ_SETUP 3
++
++		/** Do PING protocol when 1 */
++		unsigned dopng : 1;
++	} b;
++} hctsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Interrupt Mask
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcintmsk register.
++ */
++typedef union hcintmsk_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		unsigned xfercompl : 1;
++		unsigned chhltd : 1;
++		unsigned ahberr : 1;
++		unsigned stall : 1;
++		unsigned nak : 1;
++		unsigned ack : 1;
++		unsigned nyet : 1;
++		unsigned xacterr : 1;
++		unsigned bblerr : 1;
++		unsigned frmovrun : 1;
++		unsigned datatglerr : 1;
++		unsigned reserved : 21;
++	} b;
++} hcintmsk_data_t;
++
++/** OTG Host Interface Structure.
++ *
++ * The OTG Host Interface Structure structure contains information
++ * needed to manage the DWC_otg controller acting in host mode. It
++ * represents the programming view of the host-specific aspects of the
++ * controller.
++ */
++typedef struct dwc_otg_host_if
++{
++	/** Host Global Registers starting at offset 400h.*/
++	dwc_otg_host_global_regs_t *host_global_regs;
++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
++
++	/** Host Port 0 Control and Status Register */
++	volatile uint32_t *hprt0;
++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
++
++
++	/** Host Channel Specific Registers at offsets 500h-5FCh. */
++	dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
++#define DWC_OTG_CHAN_REGS_OFFSET 0x20
++
++
++	/* Host configuration information */
++	/** Number of Host Channels (range: 1-16) */
++	uint8_t	 num_host_channels;
++	/** Periodic EPs supported (0: no, 1: yes) */
++	uint8_t	 perio_eps_supported;
++	/** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
++	uint16_t perio_tx_fifo_size;
++
++} dwc_otg_host_if_t;
++
++
++/**
++ * This union represents the bit fields in the Power and Clock Gating Control
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union pcgcctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		/** Stop Pclk */
++		unsigned stoppclk : 1;
++		/** Gate Hclk */
++		unsigned gatehclk : 1;
++		/** Power Clamp */
++		unsigned pwrclmp : 1;
++		/** Reset Power Down Modules */
++		unsigned rstpdwnmodule : 1;
++		/** PHY Suspended */
++		unsigned physuspended : 1;
++
++		unsigned reserved : 27;
++	} b;
++} pcgcctl_data_t;
++
++
++#endif
+--- /dev/null
++++ b/drivers/usb/dwc_otg/linux/dwc_otg_plat.h
+@@ -0,0 +1,260 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/platform/dwc_otg_plat.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:16 $
++ * $Change: 1064915 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_PLAT_H__)
++#define __DWC_OTG_PLAT_H__
++
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++
++/**
++ * @file
++ *
++ * This file contains the Platform Specific constants, interfaces
++ * (functions and macros) for Linux.
++ *
++ */
++//#if !defined(__LINUX_ARM_ARCH__)
++//#error "The contents of this file is Linux specific!!!"
++//#endif
++
++/**
++ * Reads the content of a register.
++ *
++ * @param reg address of register to read.
++ * @return contents of the register.
++ *
++
++ * Usage:<br>
++ * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code>
++ */
++static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *reg)
++{
++        return readl(reg);
++};
++
++/**
++ * Writes a register with a 32 bit value.
++ *
++ * @param reg address of register to read.
++ * @param value to write to _reg.
++ *
++ * Usage:<br>
++ * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
++ */
++static __inline__ void dwc_write_reg32( volatile uint32_t *reg, const uint32_t value)
++{
++        writel( value, reg );
++};
++
++/**
++ * This function modifies bit values in a register.  Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ *
++ * @param reg address of register to read.
++ * @param clear_mask bit mask to be cleared.
++ * @param set_mask bit mask to be set.
++ *
++ * Usage:<br>
++ * <code> // Clear the SOF Interrupt Mask bit and <br>
++ * // set the OTG Interrupt mask bit, leaving all others as they were.
++ *    dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
++ */
++static __inline__
++ void dwc_modify_reg32( volatile uint32_t *reg, const uint32_t clear_mask, const uint32_t set_mask)
++{
++        writel( (readl(reg) & ~clear_mask) | set_mask, reg );
++};
++
++
++/**
++ * Wrapper for the OS micro-second delay function.
++ * @param[in] usecs Microseconds of delay
++ */
++static __inline__ void UDELAY( const uint32_t usecs )
++{
++        udelay( usecs );
++}
++
++/**
++ * Wrapper for the OS milli-second delay function.
++ * @param[in] msecs milliseconds of delay
++ */
++static __inline__ void MDELAY( const uint32_t msecs )
++{
++        mdelay( msecs );
++}
++
++/**
++ * Wrapper for the Linux spin_lock.  On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_LOCK( spinlock_t *lock )
++{
++        spin_lock(lock);
++}
++
++/**
++ * Wrapper for the Linux spin_unlock.  On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_UNLOCK( spinlock_t *lock )
++{
++        spin_unlock(lock);
++}
++
++/**
++ * Wrapper (macro) for the Linux spin_lock_irqsave.  On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param l Pointer to the spinlock.
++ * @param f unsigned long for irq flags storage.
++ */
++#define SPIN_LOCK_IRQSAVE( l, f )  spin_lock_irqsave(l,f);
++
++/**
++ * Wrapper (macro) for the Linux spin_unlock_irqrestore.  On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param l Pointer to the spinlock.
++ * @param f unsigned long for irq flags storage.
++ */
++#define SPIN_UNLOCK_IRQRESTORE( l,f ) spin_unlock_irqrestore(l,f);
++
++/*
++ * Debugging support vanishes in non-debug builds.
++ */
++
++
++/**
++ * The Debug Level bit-mask variable.
++ */
++extern uint32_t g_dbg_lvl;
++/**
++ * Set the Debug Level variable.
++ */
++static inline uint32_t SET_DEBUG_LEVEL( const uint32_t new )
++{
++        uint32_t old = g_dbg_lvl;
++        g_dbg_lvl = new;
++        return old;
++}
++
++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL		(0x2)
++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
++ * messages */
++#define DBG_CILV	(0x20)
++/**  When debug level has the DBG_PCD bit set, display PCD (Device) debug
++ *  messages */
++#define DBG_PCD		(0x4)
++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
++ * messages */
++#define DBG_PCDV	(0x40)
++/** When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD		(0x8)
++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
++ * messages */
++#define DBG_HCDV	(0x80)
++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
++ *  mode. */
++#define DBG_HCD_URB	(0x800)
++
++/** When debug level has any bit set, display debug messages */
++#define DBG_ANY		(0xFF)
++
++/** All debug messages off */
++#define DBG_OFF		0
++
++/** Prefix string for DWC_DEBUG print macros. */
++#define USB_DWC "dwc_otg: "
++
++/**
++ * Print a debug message when the Global debug level variable contains
++ * the bit defined in <code>lvl</code>.
++ *
++ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
++ * @param[in] x - like printf
++ *
++ *    Example:<p>
++ * <code>
++ *      DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
++ * </code>
++ * <br>
++ * results in:<br>
++ * <code>
++ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
++ * </code>
++ */
++#ifdef DEBUG
++
++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
++# define DWC_DEBUGP(x...)	DWC_DEBUGPL(DBG_ANY, x )
++
++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
++
++#else
++
++# define DWC_DEBUGPL(lvl, x...) do{}while(0)
++# define DWC_DEBUGP(x...)
++
++# define CHK_DEBUG_LEVEL(level) (0)
++
++#endif /*DEBUG*/
++
++/**
++ * Print an Error message.
++ */
++#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
++/**
++ * Print a Warning message.
++ */
++#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
++/**
++ * Print a notice (normal but significant message).
++ */
++#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
++/**
++ *  Basic message printing.
++ */
++#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
++
++#endif
++
diff --git a/target/linux/ramips/patches-3.9/0205-owrt-MIPS-add-OWRTDTB-secion.patch b/target/linux/ramips/patches-3.9/0205-owrt-MIPS-add-OWRTDTB-secion.patch
new file mode 100644
index 0000000000..b1e8058c7b
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0205-owrt-MIPS-add-OWRTDTB-secion.patch
@@ -0,0 +1,52 @@
+From 6beb1af1b1475478c8f275b9579c9ebe4dad2904 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 19 Mar 2013 10:16:42 +0100
+Subject: [PATCH 205/208] owrt: MIPS: add OWRTDTB secion
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/kernel/head.S   |    3 +++
+ arch/mips/ralink/Makefile |    2 +-
+ arch/mips/ralink/of.c     |    4 +++-
+ 3 files changed, 7 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -146,6 +146,9 @@ EXPORT(__image_cmdline)
+ 	.fill	0x400
+ #endif /* CONFIG_IMAGE_CMDLINE_HACK */
+ 
++	.ascii  "OWRTDTB:"
++	EXPORT(__image_dtb)
++	.fill   0x4000
+ 	__REF
+ 
+ NESTED(kernel_entry, 16, sp)			# kernel entry point
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -15,4 +15,4 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o
+ 
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+ 
+-obj-y += dts/
++#obj-y += dts/
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -77,6 +77,8 @@ void __init device_tree_init(void)
+ 	free_bootmem(base, size);
+ }
+ 
++extern struct boot_param_header __image_dtb;
++
+ void __init plat_mem_setup(void)
+ {
+ 	set_io_port_base(KSEG1);
+@@ -85,7 +87,7 @@ void __init plat_mem_setup(void)
+ 	 * Load the builtin devicetree. This causes the chosen node to be
+ 	 * parsed resulting in our memory appearing
+ 	 */
+-	__dt_setup_arch(&__dtb_start);
++	__dt_setup_arch(&__image_dtb);
+ 
+ 	if (soc_info.mem_size)
+ 		add_memory_region(soc_info.mem_base, soc_info.mem_size,
diff --git a/target/linux/ramips/patches-3.9/0206-owrt-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on.patch b/target/linux/ramips/patches-3.9/0206-owrt-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on.patch
new file mode 100644
index 0000000000..8e62d13bf1
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0206-owrt-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on.patch
@@ -0,0 +1,301 @@
+From b35a0a294d39316c20f85004335c02f33a70ab68 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 24 Mar 2013 17:17:17 +0100
+Subject: [PATCH 206/208] owrt: MIPS: ralink: add pseudo pwm led trigger based
+ on timer0
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/timer.c |  213 ++++++++++++++++++++++++++++++++++++++++++----
+ 1 file changed, 197 insertions(+), 16 deletions(-)
+
+--- a/arch/mips/ralink/timer.c
++++ b/arch/mips/ralink/timer.c
+@@ -12,6 +12,8 @@
+ #include <linux/timer.h>
+ #include <linux/of_gpio.h>
+ #include <linux/clk.h>
++#include <linux/leds.h>
++#include <linux/slab.h>
+ 
+ #include <asm/mach-ralink/ralink_regs.h>
+ 
+@@ -23,16 +25,34 @@
+ 
+ #define TMR0CTL_ENABLE			BIT(7)
+ #define TMR0CTL_MODE_PERIODIC		BIT(4)
+-#define TMR0CTL_PRESCALER		1
++#define TMR0CTL_PRESCALER		2
+ #define TMR0CTL_PRESCALE_VAL		(0xf - TMR0CTL_PRESCALER)
+ #define TMR0CTL_PRESCALE_DIV		(65536 / BIT(TMR0CTL_PRESCALER))
+ 
++struct rt_timer_gpio {
++	struct list_head	list;
++	struct led_classdev	*led;
++};
++
+ struct rt_timer {
+-	struct device	*dev;
+-	void __iomem	*membase;
+-	int		irq;
+-	unsigned long	timer_freq;
+-	unsigned long	timer_div;
++	struct device		*dev;
++	void __iomem		*membase;
++	int			irq;
++
++	unsigned long		timer_freq;
++	unsigned long		timer_div;
++
++	struct list_head	gpios;
++	struct led_trigger	led_trigger;
++	unsigned int		duty_cycle;
++	unsigned int		duty;
++
++	unsigned int		fade;
++	unsigned int		fade_min;
++	unsigned int		fade_max;
++	unsigned int		fade_speed;
++	unsigned int		fade_dir;
++	unsigned int		fade_count;
+ };
+ 
+ static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
+@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt
+ static irqreturn_t rt_timer_irq(int irq, void *_rt)
+ {
+ 	struct rt_timer *rt =  (struct rt_timer *) _rt;
++	struct rt_timer_gpio *gpio;
++	unsigned int val;
+ 
+-	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
++	if (rt->fade && (rt->fade_count++ > rt->fade_speed)) {
++		rt->fade_count = 0;
++		if (rt->duty_cycle <= rt->fade_min)
++			rt->fade_dir = 1;
++		else if (rt->duty_cycle >= rt->fade_max)
++			rt->fade_dir = 0;
++
++		if (rt->fade_dir)
++			rt->duty_cycle += 1;
++		else
++			rt->duty_cycle -= 1;
++
++	}
++
++	val = rt->timer_freq / rt->timer_div;
++	if (rt->duty)
++		val *= rt->duty_cycle;
++	else
++		val *= (100 - rt->duty_cycle);
++	val /= 100;
++
++	if (!list_empty(&rt->gpios))
++		list_for_each_entry(gpio, &rt->gpios, list)
++			led_set_brightness(gpio->led, !!rt->duty);
++
++	rt->duty = !rt->duty;
++
++	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, val + 1);
+ 	rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
+ 
+ 	return IRQ_HANDLED;
+ }
+ 
+-
+ static int rt_timer_request(struct rt_timer *rt)
+ {
+-	int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED,
+-						dev_name(rt->dev), rt);
++	int err = devm_request_irq(rt->dev, rt->irq, rt_timer_irq,
++					IRQF_DISABLED, dev_name(rt->dev), rt);
+ 	if (err) {
+ 		dev_err(rt->dev, "failed to request irq\n");
+ 	} else {
+@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_tim
+ 	else
+ 		rt->timer_div = divisor;
+ 
+-	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+-
+ 	return 0;
+ }
+ 
+@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_t
+ 	rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+ }
+ 
++static ssize_t led_fade_show(struct device *dev,
++				struct device_attribute *attr, char *buf)
++{
++	struct led_classdev *led_cdev = dev_get_drvdata(dev);
++	struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++
++	return sprintf(buf, "speed: %d, min: %d, max: %d\n", rt->fade_speed, rt->fade_min, rt->fade_max);
++}
++
++static ssize_t led_fade_store(struct device *dev,
++		struct device_attribute *attr, const char *buf, size_t size)
++{
++	struct led_classdev *led_cdev = dev_get_drvdata(dev);
++	struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++	unsigned int speed = 0, min = 0, max = 0;
++	ssize_t ret = -EINVAL;
++
++	ret = sscanf(buf, "%u %u %u", &speed, &min, &max);
++
++	if (ret == 3) {
++		rt->fade_speed = speed;
++		rt->fade_min = min;
++		rt->fade_max = max;
++		rt->fade = 1;
++	} else {
++		rt->fade = 0;
++	}
++
++	return size;
++}
++
++static DEVICE_ATTR(fade, 0644, led_fade_show, led_fade_store);
++
++static ssize_t led_duty_cycle_show(struct device *dev,
++				struct device_attribute *attr, char *buf)
++{
++	struct led_classdev *led_cdev = dev_get_drvdata(dev);
++	struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++
++	return sprintf(buf, "%u\n", rt->duty_cycle);
++}
++
++static ssize_t led_duty_cycle_store(struct device *dev,
++		struct device_attribute *attr, const char *buf, size_t size)
++{
++	struct led_classdev *led_cdev = dev_get_drvdata(dev);
++	struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++	unsigned long state;
++	ssize_t ret = -EINVAL;
++
++	ret = kstrtoul(buf, 10, &state);
++	if (ret)
++		return ret;
++
++	if (state <= 100)
++		rt->duty_cycle = state;
++	else
++		rt->duty_cycle = 100;
++
++	rt->fade = 0;
++
++	return size;
++}
++
++static DEVICE_ATTR(duty_cycle, 0644, led_duty_cycle_show, led_duty_cycle_store);
++
++static void rt_timer_trig_activate(struct led_classdev *led_cdev)
++{
++	struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++	struct rt_timer_gpio *gpio_data;
++	int rc;
++
++	led_cdev->trigger_data = NULL;
++	gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL);
++	if (!gpio_data)
++		return;
++
++	rc = device_create_file(led_cdev->dev, &dev_attr_duty_cycle);
++	if (rc)
++		goto err_gpio;
++	rc = device_create_file(led_cdev->dev, &dev_attr_fade);
++	if (rc)
++		goto err_out_duty_cycle;
++
++	led_cdev->activated = true;
++	led_cdev->trigger_data = gpio_data;
++	gpio_data->led = led_cdev;
++	list_add(&gpio_data->list, &rt->gpios);
++	led_cdev->trigger_data = gpio_data;
++	rt_timer_enable(rt);
++	return;
++
++err_out_duty_cycle:
++	device_remove_file(led_cdev->dev, &dev_attr_duty_cycle);
++
++err_gpio:
++	kfree(gpio_data);
++}
++
++static void rt_timer_trig_deactivate(struct led_classdev *led_cdev)
++{
++	struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++	struct rt_timer_gpio *gpio_data = (struct rt_timer_gpio*) led_cdev->trigger_data;
++
++	if (led_cdev->activated) {
++		device_remove_file(led_cdev->dev, &dev_attr_duty_cycle);
++		device_remove_file(led_cdev->dev, &dev_attr_fade);
++		led_cdev->activated = false;
++	}
++
++	list_del(&gpio_data->list);
++	rt_timer_disable(rt);
++	led_set_brightness(led_cdev, LED_OFF);
++}
++
+ static int rt_timer_probe(struct platform_device *pdev)
+ {
+ 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	const __be32 *divisor;
+ 	struct rt_timer *rt;
+ 	struct clk *clk;
++	int ret;
+ 
+ 	if (!res) {
+ 		dev_err(&pdev->dev, "no memory resource found\n");
+@@ -147,12 +310,29 @@ static int rt_timer_probe(struct platfor
+ 	if (!rt->timer_freq)
+ 		return -EINVAL;
+ 
++	rt->duty_cycle = 100;
+ 	rt->dev = &pdev->dev;
+ 	platform_set_drvdata(pdev, rt);
+ 
+-	rt_timer_request(rt);
+-	rt_timer_config(rt, 2);
+-	rt_timer_enable(rt);
++	ret = rt_timer_request(rt);
++	if (ret)
++		return ret;
++
++	divisor = of_get_property(pdev->dev.of_node, "ralink,divisor", NULL);
++	if (divisor)
++		rt_timer_config(rt, be32_to_cpu(*divisor));
++	else
++		rt_timer_config(rt, 200);
++
++	rt->led_trigger.name = "pwmtimer",
++	rt->led_trigger.activate = rt_timer_trig_activate,
++	rt->led_trigger.deactivate = rt_timer_trig_deactivate,
++
++	ret = led_trigger_register(&rt->led_trigger);
++	if (ret)
++		return ret;
++
++	INIT_LIST_HEAD(&rt->gpios);
+ 
+ 	dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
+ 
+@@ -163,6 +343,7 @@ static int rt_timer_remove(struct platfo
+ {
+ 	struct rt_timer *rt = platform_get_drvdata(pdev);
+ 
++	led_trigger_unregister(&rt->led_trigger);
+ 	rt_timer_disable(rt);
+ 	rt_timer_free(rt);
+ 
+@@ -187,6 +368,6 @@ static struct platform_driver rt_timer_d
+ 
+ module_platform_driver(rt_timer_driver);
+ 
+-MODULE_DESCRIPTION("Ralink RT2880 timer");
++MODULE_DESCRIPTION("Ralink RT2880 timer / pseudo pwm");
+ MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
+ MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-3.9/0208-owrt-mtd-split.patch b/target/linux/ramips/patches-3.9/0208-owrt-mtd-split.patch
new file mode 100644
index 0000000000..f15d16f6da
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0208-owrt-mtd-split.patch
@@ -0,0 +1,151 @@
+From 2a295753a10823a47542c779a25bbb1f52c71281 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 3 Aug 2012 10:27:13 +0200
+Subject: [PATCH 19/25] owrt mtd split
+
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    1 +
+ arch/mips/lantiq/setup.c                           |    7 +
+ drivers/mtd/Kconfig                                |    4 +
+ drivers/mtd/mtdpart.c                              |  173 +++++++++++++++++++-
+ 4 files changed, 184 insertions(+), 1 deletions(-)
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -31,6 +31,10 @@ config MTD_ROOTFS_SPLIT
+ 	bool "Automatically split 'rootfs' partition for squashfs"
+ 	default y
+ 
++config MTD_UIMAGE_SPLIT
++	bool "Automatically split 'linux' partition into 'kernel' and 'rootfs'"
++	default y
++
+ config MTD_REDBOOT_PARTS
+ 	tristate "RedBoot partition table parsing"
+ 	---help---
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -833,6 +833,99 @@ static int refresh_rootfs_split(struct m
+ }
+ #endif /* CONFIG_MTD_ROOTFS_SPLIT */
+ 
++#ifdef CONFIG_MTD_UIMAGE_SPLIT
++static unsigned long find_uimage_size(struct mtd_info *mtd,
++				      unsigned long offset)
++{
++#define UBOOT_MAGIC	0x56190527
++	unsigned long magic = 0;
++	unsigned long temp;
++	size_t len;
++	int ret;
++
++	ret = mtd_read(mtd, offset, 4, &len, (void *)&magic);
++	if (ret || len != sizeof(magic))
++		return 0;
++
++	if (le32_to_cpu(magic) != UBOOT_MAGIC)
++		return 0;
++
++	ret = mtd_read(mtd, offset + 12, 4, &len, (void *)&temp);
++	if (ret || len != sizeof(temp))
++		return 0;
++
++	return be32_to_cpu(temp) + 0x40;
++}
++
++static int detect_squashfs_partition(struct mtd_info *mtd, unsigned long offset)
++{
++	unsigned long temp;
++	size_t len;
++	int ret;
++
++	ret = mtd_read(mtd, offset, 4, &len, (void *)&temp);
++	if (ret || len != sizeof(temp))
++		return 0;
++
++	return le32_to_cpu(temp) == SQUASHFS_MAGIC;
++}
++
++static unsigned long find_squashfs_offset(struct mtd_info *mtd, unsigned long _offset)
++{
++	/* scan the first 2MB at 64K offsets */
++	int i;
++
++	for (i = 0; i < 32; i++) {
++		unsigned long offset = i * 64 * 1024;
++		if (detect_squashfs_partition(mtd, _offset + offset))
++			return offset;
++	}
++	return 0;
++}
++
++static int split_uimage(struct mtd_info *mtd,
++			const struct mtd_partition *part)
++{
++	static struct mtd_partition split_partitions[] = {
++		{
++			.name = "kernel",
++			.offset = 0x0,
++			.size = 0x0,
++		}, {
++			.name = "rootfs",
++			.offset = 0x0,
++			.size = 0x0,
++		},
++	};
++
++	split_partitions[0].size = find_uimage_size(mtd, part->offset);
++	if (!split_partitions[0].size) {
++		split_partitions[0].size = find_squashfs_offset(mtd, part->offset);
++		if (!split_partitions[0].size) {
++			pr_err("failed to split firmware partition\n");
++			return -1;
++		}
++	}
++
++	if (!detect_squashfs_partition(mtd,
++				       part->offset
++				       + split_partitions[0].size)) {
++		split_partitions[0].size &= ~(mtd->erasesize - 1);
++		split_partitions[0].size += mtd->erasesize;
++	} else {
++		pr_info("found squashfs behind kernel\n");
++	}
++
++	split_partitions[0].offset = part->offset;
++	split_partitions[1].offset = part->offset + split_partitions[0].size;
++	split_partitions[1].size = part->size - split_partitions[0].size;
++
++	add_mtd_partitions(mtd, split_partitions, 2);
++
++	return 0;
++}
++#endif
++
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -849,7 +942,7 @@ int add_mtd_partitions(struct mtd_info *
+ 	struct mtd_part *slave;
+ 	uint64_t cur_offset = 0;
+ 	int i;
+-#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#if defined(CONFIG_MTD_ROOTFS_SPLIT) || defined(CONFIG_MTD_UIMAGE_SPLIT)
+ 	int ret;
+ #endif
+ 
+@@ -866,6 +959,14 @@ int add_mtd_partitions(struct mtd_info *
+ 
+ 		add_mtd_device(&slave->mtd);
+ 
++#ifdef CONFIG_MTD_UIMAGE_SPLIT
++		if (!strcmp(parts[i].name, "firmware")) {
++			ret = split_uimage(master, &parts[i]);
++			if (ret)
++				printk(KERN_WARNING "Can't split firmware partition\n");
++		}
++#endif
++
+ 		if (!strcmp(parts[i].name, "rootfs")) {
+ #ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
+ 			if (ROOT_DEV == 0) {
diff --git a/target/linux/ramips/patches-3.9/0210-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-3.9/0210-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
new file mode 100644
index 0000000000..91b887f922
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0210-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
@@ -0,0 +1,20 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1939,7 +1939,7 @@ static int __xipram do_erase_chip(struct
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr))
++		if (chip_good(map, adr, map_word_ff(map)))
+ 			break;
+ 
+ 		if (time_after(jiffies, timeo)) {
+@@ -2028,7 +2028,7 @@ static int __xipram do_erase_oneblock(st
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr)) {
++		if (chip_good(map, adr, map_word_ff(map))) {
+ 			xip_enable(map, chip, adr);
+ 			break;
+ 		}
diff --git a/target/linux/ramips/patches-3.9/0211-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ramips/patches-3.9/0211-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644
index 0000000000..25ae351e65
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0211-mtd-cfi_cmdset_0002-force-word-write.patch
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,7 +39,7 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ 
+ #define MAX_WORD_RETRIES 3
+ 
+@@ -50,7 +50,9 @@
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+ 
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+ 	struct map_info *map = mtd->priv;
+@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
+ 		mtd->_write = cfi_amdstd_write_buffers;
+ 	}
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1443,6 +1447,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ 				    unsigned long adr, const u_char *buf,
+ 				    int len)
+@@ -1567,7 +1572,6 @@ static int __xipram do_write_buffer(stru
+ 	return ret;
+ }
+ 
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ 				    size_t *retlen, const u_char *buf)
+ {
+@@ -1642,6 +1646,7 @@ static int cfi_amdstd_write_buffers(stru
+ 
+ 	return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /*
+  * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ramips/patches-3.9/0999-net.patch b/target/linux/ramips/patches-3.9/0999-net.patch
new file mode 100644
index 0000000000..954c747022
--- /dev/null
+++ b/target/linux/ramips/patches-3.9/0999-net.patch
@@ -0,0 +1,160 @@
+From 194f30e932952d74438fce68006f30f5a180459b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 22 Jun 2013 20:36:21 +0200
+Subject: [PATCH] net
+
+---
+ drivers/net/ethernet/ralink/mdio_rt2880.c    |   48 ++++++++++++++++++++++++--
+ drivers/net/ethernet/ralink/mdio_rt2880.h    |    3 +-
+ drivers/net/ethernet/ralink/ralink_soc_eth.h |    2 ++
+ drivers/net/ethernet/ralink/soc_rt3883.c     |    3 +-
+ 4 files changed, 51 insertions(+), 5 deletions(-)
+
+Index: linux-3.9.6/drivers/net/ethernet/ralink/mdio_rt2880.c
+===================================================================
+--- linux-3.9.6.orig/drivers/net/ethernet/ralink/mdio_rt2880.c	2013-06-22 22:46:13.596610936 +0200
++++ linux-3.9.6/drivers/net/ethernet/ralink/mdio_rt2880.c	2013-06-22 23:25:29.536713089 +0200
+@@ -32,6 +32,7 @@
+ 
+ #include "ralink_soc_eth.h"
+ #include "mdio_rt2880.h"
++#include "mdio.h"
+ 
+ #define FE_MDIO_RETRY	1000
+ 
+@@ -49,7 +50,7 @@
+ 	return "?";
+ }
+ 
+-void rt2880_mdio_link_adjust(struct fe_priv *priv)
++void rt2880_mdio_link_adjust(struct fe_priv *priv, int port)
+ {
+ 	u32 mdio_cfg;
+ 
+@@ -66,10 +67,10 @@
+ 	if (priv->phy->duplex[0] == DUPLEX_FULL)
+ 		mdio_cfg |= FE_MDIO_CFG_GP1_DUPLEX;
+ 
+-	if (priv->phy->tx_fc)
++	if (priv->phy->tx_fc[0])
+ 		mdio_cfg |= FE_MDIO_CFG_GP1_FC_TX;
+ 
+-	if (priv->phy->rx_fc)
++	if (priv->phy->rx_fc[0])
+ 		mdio_cfg |= FE_MDIO_CFG_GP1_FC_RX;
+ 
+ 	switch (priv->phy->speed[0]) {
+@@ -161,3 +162,71 @@
+ 
+ 	return rt2880_mdio_wait_ready(priv);
+ }
++
++void rt2880_port_init(struct fe_priv *priv, struct device_node *np)
++{
++	const __be32 *id = of_get_property(np, "reg", NULL);
++	const __be32 *link;
++	int size;
++	int phy_mode;
++
++	if (!id || (be32_to_cpu(*id) != 0)) {
++		pr_err("%s: invalid port id\n", np->name);
++		return;
++	}
++
++	priv->phy->phy_fixed[0] = of_get_property(np, "ralink,fixed-link", &size);
++	if (priv->phy->phy_fixed[0] && (size != (4 * sizeof(*priv->phy->phy_fixed[0])))) {
++		pr_err("%s: invalid fixed link property\n", np->name);
++		priv->phy->phy_fixed[0] = NULL;
++		return;
++	}
++
++	phy_mode = of_get_phy_mode(np);
++	switch (phy_mode) {
++	case PHY_INTERFACE_MODE_RGMII:
++		break;
++	case PHY_INTERFACE_MODE_MII:
++		break;
++	case PHY_INTERFACE_MODE_RMII:
++		break;
++	default:
++		if (!priv->phy->phy_fixed[0])
++			dev_err(priv->device, "port %d - invalid phy mode\n", priv->phy->speed[0]);
++		break;
++	}
++
++	priv->phy->phy_node[0] = of_parse_phandle(np, "phy-handle", 0);
++	if (!priv->phy->phy_node[0] && !priv->phy->phy_fixed[0])
++		return;
++
++	if (priv->phy->phy_fixed[0]) {
++		link = priv->phy->phy_fixed[0];
++		priv->phy->speed[0] = be32_to_cpup(link++);
++		priv->phy->duplex[0] = be32_to_cpup(link++);
++		priv->phy->tx_fc[0] = be32_to_cpup(link++);
++		priv->phy->rx_fc[0] = be32_to_cpup(link++);
++
++		priv->link[0] = 1;
++		switch (priv->phy->speed[0]) {
++		case SPEED_10:
++			break;
++		case SPEED_100:
++			break;
++		case SPEED_1000:
++			break;
++		default:
++			dev_err(priv->device, "invalid link speed: %d\n", priv->phy->speed[0]);
++			priv->phy->phy_fixed[0] = 0;
++			return;
++		}
++		dev_info(priv->device, "using fixed link parameters\n");
++		rt2880_mdio_link_adjust(priv, 0);
++		return;
++	}
++	if (priv->phy->phy_node[0] && priv->mii_bus->phy_map[0]) {
++		fe_connect_phy_node(priv, priv->phy->phy_node[0]);
++	}
++
++	return;
++}
+Index: linux-3.9.6/drivers/net/ethernet/ralink/mdio_rt2880.h
+===================================================================
+--- linux-3.9.6.orig/drivers/net/ethernet/ralink/mdio_rt2880.h	2013-06-22 22:46:13.600610937 +0200
++++ linux-3.9.6/drivers/net/ethernet/ralink/mdio_rt2880.h	2013-06-22 22:46:13.744610945 +0200
+@@ -18,8 +18,9 @@
+ #ifndef _RALINK_MDIO_RT2880_H__
+ #define _RALINK_MDIO_RT2880_H__
+ 
+-void rt2880_mdio_link_adjust(struct fe_priv *priv);
++void rt2880_mdio_link_adjust(struct fe_priv *priv, int port);
+ int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
+ int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
+ 
+ #endif
+Index: linux-3.9.6/drivers/net/ethernet/ralink/ralink_soc_eth.h
+===================================================================
+--- linux-3.9.6.orig/drivers/net/ethernet/ralink/ralink_soc_eth.h	2013-06-22 22:46:13.600610937 +0200
++++ linux-3.9.6/drivers/net/ethernet/ralink/ralink_soc_eth.h	2013-06-22 22:46:13.744610945 +0200
+@@ -301,6 +301,8 @@
+ 	const __be32		*phy_fixed[8];
+ 	int			duplex[8];
+ 	int			speed[8];
++	int			tx_fc[8];
++	int			rx_fc[8];
+ 	spinlock_t		lock;
+ 
+ 	int (*connect)(struct fe_priv *priv);
+Index: linux-3.9.6/drivers/net/ethernet/ralink/soc_rt3883.c
+===================================================================
+--- linux-3.9.6.orig/drivers/net/ethernet/ralink/soc_rt3883.c	2013-06-22 22:46:13.600610937 +0200
++++ linux-3.9.6/drivers/net/ethernet/ralink/soc_rt3883.c	2013-06-22 22:46:13.744610945 +0200
+@@ -47,7 +47,8 @@
+ 	.checksum_bit = RX_DMA_L4VALID,
+ 	.mdio_read = rt2880_mdio_read,
+ 	.mdio_write = rt2880_mdio_write,
+-	.mdio_link_adjust = rt2880_mdio_link_adjust,
++	.mdio_adjust_link = rt2880_mdio_link_adjust,
++	.port_init = rt2880_port_init,
+ };
+ 
+ const struct of_device_id of_fe_match[] = {
diff --git a/target/linux/ramips/rt288x/config-3.9 b/target/linux/ramips/rt288x/config-3.9
new file mode 100644
index 0000000000..28e573349b
--- /dev/null
+++ b/target/linux/ramips/rt288x/config-3.9
@@ -0,0 +1,149 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_RT2880_EVAL is not set
+# CONFIG_DTB_RT305X_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MII is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RAMIPS=y
+# CONFIG_NET_RAMIPS_DEBUG is not set
+# CONFIG_NET_RAMIPS_DEBUG_FS is not set
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PCI is not set
+CONFIG_PERCPU_RWSEM=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_WDT=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SOC_MT7620 is not set
+CONFIG_SOC_RT288X=y
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RALINK=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt305x/config-3.8 b/target/linux/ramips/rt305x/config-3.8
index e87d7607cf..bb81bc9bcb 100644
--- a/target/linux/ramips/rt305x/config-3.8
+++ b/target/linux/ramips/rt305x/config-3.8
@@ -1,6 +1,7 @@
 CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_ARCH_DISCARD_MEMBLOCK=y
 CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
@@ -9,6 +10,9 @@ CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_CEVT_R4K=y
 CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
 CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
 CONFIG_CMDLINE_BOOL=y
 # CONFIG_CMDLINE_OVERRIDE is not set
@@ -27,8 +31,9 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CSRC_R4K=y
 CONFIG_DECOMPRESS_LZMA=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTB_RT305X_EVAL=y
-# CONFIG_DTB_RT_NONE is not set
+# CONFIG_DTB_RT305X_EVAL is not set
+# CONFIG_DTB_RT5350_EVAL is not set
+CONFIG_DTB_RT_NONE=y
 CONFIG_DTC=y
 # CONFIG_DWC_OTG is not set
 CONFIG_EARLY_PRINTK=y
@@ -95,9 +100,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UIMAGE_SPLIT=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RAMIPS=y
-# CONFIG_NET_RAMIPS_DEBUG is not set
-# CONFIG_NET_RAMIPS_DEBUG_FS is not set
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_ESW_RT3052=y
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
 CONFIG_OF_DEVICE=y
@@ -114,7 +118,9 @@ CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_RALINK=y
+CONFIG_RALINK_USBPHY=y
 CONFIG_RALINK_WDT=y
+CONFIG_RESET_CONTROLLER=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RT288X=y
@@ -138,6 +144,8 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_UIDGID_CONVERTED=y
 # CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_OTG_UTILS=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
 CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt305x/config-3.9 b/target/linux/ramips/rt305x/config-3.9
new file mode 100644
index 0000000000..72c6082437
--- /dev/null
+++ b/target/linux/ramips/rt305x/config-3.9
@@ -0,0 +1,157 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_RT305X_EVAL is not set
+# CONFIG_DTB_RT5350_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+# CONFIG_DWC_OTG is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MII is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_ESW_RT3052=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+# CONFIG_OF_DISPLAY_TIMING is not set
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+# CONFIG_OF_VIDEOMODE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_USBPHY=y
+CONFIG_RALINK_WDT=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SOC_MT7620 is not set
+# CONFIG_SOC_RT288X is not set
+CONFIG_SOC_RT305X=y
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RALINK=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt3883/config-3.9 b/target/linux/ramips/rt3883/config-3.9
new file mode 100644
index 0000000000..e8dab5859c
--- /dev/null
+++ b/target/linux/ramips/rt3883/config-3.9
@@ -0,0 +1,164 @@
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_RT3883_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MII is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RALINK_MDIO_RT2880=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+# CONFIG_OF_DISPLAY_TIMING is not set
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+# CONFIG_OF_VIDEOMODE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+# CONFIG_RALINK_USBPHY is not set
+CONFIG_RALINK_WDT=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367B_PHY=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SOC_MT7620 is not set
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+CONFIG_SOC_RT3883=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RALINK=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_ZONE_DMA_FLAG=0