diff options
-rw-r--r-- | target/linux/ath79/dts/qca9558_belkin_f9j1108-v2.dts | 223 | ||||
-rw-r--r-- | target/linux/ath79/dts/qca9558_belkin_f9x-v2.dtsi | 226 | ||||
-rw-r--r-- | target/linux/ath79/image/generic.mk | 14 |
3 files changed, 238 insertions, 225 deletions
diff --git a/target/linux/ath79/dts/qca9558_belkin_f9j1108-v2.dts b/target/linux/ath79/dts/qca9558_belkin_f9j1108-v2.dts index 0bd3af98db..80775d6cb3 100644 --- a/target/linux/ath79/dts/qca9558_belkin_f9j1108-v2.dts +++ b/target/linux/ath79/dts/qca9558_belkin_f9j1108-v2.dts @@ -1,229 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "qca955x.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "qca9558_belkin_f9x-v2.dtsi" / { model = "Belkin F9J1108 v2 (AC1750 DB Wi-Fi)"; compatible = "belkin,f9j1108-v2", "qca,qca9558"; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - label-mac-device = ð1; - }; - - leds { - compatible = "gpio-leds"; - - usb { - label = "green:usb2"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - trigger-sources = <&hub_port0>; - linux,default-trigger = "usbport"; - }; - - status { - label = "amber:status"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - - wps-amber { - label = "amber:wps"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - - wps-blue { - label = "blue:wps"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - }; - - led_system: system { - label = "blue:system"; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb2_power { - gpio-export,name = "usb2:power"; - gpio-export,output = <1>; - gpios = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "WPS button"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - reset { - label = "Reset button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - virtual_flash { - compatible = "mtd-concat"; - - devices = <&fwpart1 &fwpart2>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - compatible = "openwrt,okli"; - label = "firmware"; - reg = <0x0 0x0>; - }; - }; - }; -}; - -&pcie1 { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - hub_port0: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&spi { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <80000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - uboot: partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - fwpart1: partition@50000 { - label = "fwpart1"; - reg = <0x050000 0xe20000>; - }; - - partition@e70000 { - label = "loader"; - reg = <0xe70000 0x10000>; - read-only; - }; - - fwpart2: partition@e80000 { - label = "fwpart2"; - reg = <0xe80000 0x170000>; - }; - - art: partition@ff0000 { - label = "art"; - reg = <0xff0000 0x010000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - - qca,ar8327-initvals = < - 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ - 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ - 0x50 0xc737c737 /* LED_CTRL0 */ - 0x54 0x00000000 /* LED_CTRL1 */ - 0x58 0x00000000 /* LED_CTRL2 */ - 0x5c 0x0030c300 /* LED_CTRL3 */ - 0x7c 0x0000007e /* PORT0_STATUS */ - 0x94 0x0000007e /* PORT6 STATUS */ - >; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - phy-handle = <&phy0>; - pll-data = <0xa6000000 0x00000101 0x00001616>; - - gmac-config { - device = <&gmac>; - rgmii-enabled = <1>; - }; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - mtd-mac-address-increment = <(-1)>; - pll-data = <0x03000101 0x00000101 0x00001616>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&pcie0 { - status = "okay"; - - wifi@0,0 { - compatible = "qcom,ath10k"; - reg = <0 0 0 0 0>; - }; -}; - -&wmac { - status = "okay"; - - mtd-cal-data = <&art 0x1000>; }; diff --git a/target/linux/ath79/dts/qca9558_belkin_f9x-v2.dtsi b/target/linux/ath79/dts/qca9558_belkin_f9x-v2.dtsi new file mode 100644 index 0000000000..c88e2b0ba6 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_belkin_f9x-v2.dtsi @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca955x.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + label-mac-device = ð1; + }; + + leds { + compatible = "gpio-leds"; + + usb { + label = "green:usb2"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port0>; + linux,default-trigger = "usbport"; + }; + + status { + label = "amber:status"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + wps-amber { + label = "amber:wps"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + wps-blue { + label = "blue:wps"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + + led_system: system { + label = "blue:system"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb2_power { + gpio-export,name = "usb2:power"; + gpio-export,output = <1>; + gpios = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "WPS button"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + reset { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + virtual_flash { + compatible = "mtd-concat"; + + devices = <&fwpart1 &fwpart2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "openwrt,okli"; + label = "firmware"; + reg = <0x0 0x0>; + }; + }; + }; +}; + +&pcie1 { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port0: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + fwpart1: partition@50000 { + label = "fwpart1"; + reg = <0x050000 0xe20000>; + }; + + partition@e70000 { + label = "loader"; + reg = <0xe70000 0x10000>; + read-only; + }; + + fwpart2: partition@e80000 { + label = "fwpart2"; + reg = <0xe80000 0x170000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ + 0x50 0xc737c737 /* LED_CTRL0 */ + 0x54 0x00000000 /* LED_CTRL1 */ + 0x58 0x00000000 /* LED_CTRL2 */ + 0x5c 0x0030c300 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x0000007e /* PORT6 STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + phy-handle = <&phy0>; + pll-data = <0xa6000000 0x00000101 0x00001616>; + + gmac-config { + device = <&gmac>; + rgmii-enabled = <1>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <(-1)>; + pll-data = <0x03000101 0x00000101 0x00001616>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pcie0 { + status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + }; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index d5fbd89c26..02fdf8ecad 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -7,6 +7,7 @@ DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DEVICE_VARS += DAP_SIGNATURE ENGENIUS_IMGNAME +DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL define Build/add-elecom-factory-initramfs $(eval edimax_model=$(word 1,$(1))) @@ -381,10 +382,9 @@ define Device/avm_fritzdvbc endef TARGET_DEVICES += avm_fritzdvbc -define Device/belkin_f9j1108-v2 +define Device/belkin_f9x-v2 SOC := qca9558 DEVICE_VENDOR := Belkin - DEVICE_MODEL := F9J1108 v2 (AC1750 DB Wi-Fi) IMAGE_SIZE := 14464k DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2 \ kmod-usb3 kmod-usb-ledtrig-usbport @@ -398,7 +398,15 @@ define Device/belkin_f9j1108-v2 IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | \ - edimax-headers F9J1108v1 BR-6679BAC | pad-to $$$$(BLOCKSIZE) + edimax-headers $$$$(EDIMAX_HEADER_MAGIC) $$$$(EDIMAX_HEADER_MODEL) | \ + pad-to $$$$(BLOCKSIZE) +endef + +define Device/belkin_f9j1108-v2 + $(Device/belkin_f9x-v2) + DEVICE_MODEL := F9J1108 v2 (AC1750 DB Wi-Fi) + EDIMAX_HEADER_MAGIC := F9J1108v1 + EDIMAX_HEADER_MODEL := BR-6679BAC endef TARGET_DEVICES += belkin_f9j1108-v2 |