diff options
Diffstat (limited to 'package/boot/uboot-lantiq/patches')
| -rw-r--r-- | package/boot/uboot-lantiq/patches/0115-MIPS-add-board-support-for-Arcadyan-ARV7506PW11.patch | 275 |
1 files changed, 275 insertions, 0 deletions
diff --git a/package/boot/uboot-lantiq/patches/0115-MIPS-add-board-support-for-Arcadyan-ARV7506PW11.patch b/package/boot/uboot-lantiq/patches/0115-MIPS-add-board-support-for-Arcadyan-ARV7506PW11.patch new file mode 100644 index 0000000000..b7a8a6ac2a --- /dev/null +++ b/package/boot/uboot-lantiq/patches/0115-MIPS-add-board-support-for-Arcadyan-ARV7506PW11.patch @@ -0,0 +1,275 @@ +--- /dev/null ++++ b/board/arcadyan/arv7506pw11/Makefile +@@ -0,0 +1,27 @@ ++# ++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).o ++ ++COBJS = $(BOARD).o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +--- /dev/null ++++ b/board/arcadyan/arv7506pw11/arv7506pw11.c +@@ -0,0 +1,97 @@ ++/* ++ * Copyright (C) 2016 Mathias Kresin <dev@kresin.me> ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include <common.h> ++#include <switch.h> ++#include <asm/gpio.h> ++#include <asm/lantiq/eth.h> ++#include <asm/lantiq/reset.h> ++#include <asm/lantiq/chipid.h> ++ ++#if defined(CONFIG_SYS_BOOT_RAM) ++#define do_gpio_init 1 ++#elif defined(CONFIG_SYS_BOOT_NOR) ++#define do_gpio_init 1 ++#else ++#define do_gpio_init 0 ++#endif ++ ++#define GPIO_POWER_GREEN 3 ++#define GPIO_POWER_RED 6 ++#define GPIO_GPHY_RESET 19 ++ ++static void gpio_init(void) ++{ ++ /* Reset switch to have him in a clean state on reboot */ ++ gpio_direction_output(GPIO_GPHY_RESET, 0); ++ udelay(20); ++ gpio_direction_output(GPIO_GPHY_RESET, 1); ++ ++ /* Turn on the green power LED */ ++ gpio_direction_output(GPIO_POWER_GREEN, 0); ++ ++ /* Turn off the red power LED */ ++ gpio_direction_output(GPIO_POWER_RED, 1); ++} ++ ++int board_early_init_f(void) ++{ ++ if (do_gpio_init) ++ gpio_init(); ++ ++ return 0; ++} ++ ++int checkboard(void) ++{ ++ puts("Board: " CONFIG_BOARD_NAME "\n"); ++ ltq_chip_print_info(); ++ ++ return 0; ++} ++ ++void show_boot_progress(int arg) ++{ ++ if (!do_gpio_init) ++ return 0; ++ ++ if (arg >= 0) { ++ /* Success - turn off the red power LED and turn on the green power LED */ ++ gpio_set_value(GPIO_POWER_RED, 1); ++ gpio_set_value(GPIO_POWER_GREEN, 0); ++ } else { ++ /* Failure - turn off green power LED and turn on red power LED */ ++ gpio_set_value(GPIO_POWER_GREEN, 1); ++ gpio_set_value(GPIO_POWER_RED, 0); ++ } ++ ++ return 0; ++} ++ ++static const struct ltq_eth_port_config eth_port_config[] = { ++ /* MAC0: Realtek rtl8306 switch */ ++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII }, ++}; ++ ++static const struct ltq_eth_board_config eth_board_config = { ++ .ports = eth_port_config, ++ .num_ports = ARRAY_SIZE(eth_port_config), ++}; ++ ++int board_eth_init(bd_t *bis) ++{ ++ return ltq_eth_initialize(ð_board_config); ++} ++static struct switch_device rtl8306_dev = { ++ .name = "rtl8306", ++ .cpu_port = 5, ++ .port_mask = 0xF, ++}; ++ ++int board_switch_init(void) ++{ ++ return switch_device_register(&rtl8306_dev); ++} +--- /dev/null ++++ b/board/arcadyan/arv7506pw11/config.mk +@@ -0,0 +1,7 @@ ++# ++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR) +--- /dev/null ++++ b/board/arcadyan/arv7506pw11/ddr_settings.h +@@ -0,0 +1,55 @@ ++/* ++ * Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org> ++ * ++ * This file has been generated with lantiq_ram_extract_magic.awk script. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#define MC_DC00_VALUE 0x1B1B ++#define MC_DC01_VALUE 0x0 ++#define MC_DC02_VALUE 0x0 ++#define MC_DC03_VALUE 0x0 ++#define MC_DC04_VALUE 0x0 ++#define MC_DC05_VALUE 0x200 ++#define MC_DC06_VALUE 0x605 ++#define MC_DC07_VALUE 0x303 ++#define MC_DC08_VALUE 0x102 ++#define MC_DC09_VALUE 0x70A ++#define MC_DC10_VALUE 0x203 ++#define MC_DC11_VALUE 0xC02 ++#define MC_DC12_VALUE 0x1C8 ++#define MC_DC13_VALUE 0x1 ++#define MC_DC14_VALUE 0x0 ++#define MC_DC15_VALUE 0x142 ++#define MC_DC16_VALUE 0xC800 ++#define MC_DC17_VALUE 0xD ++#define MC_DC18_VALUE 0x301 ++#define MC_DC19_VALUE 0x200 ++#define MC_DC20_VALUE 0xA03 ++#define MC_DC21_VALUE 0x1300 ++#define MC_DC22_VALUE 0x1313 ++#define MC_DC23_VALUE 0x0 ++#define MC_DC24_VALUE 0x68 ++#define MC_DC25_VALUE 0x0 ++#define MC_DC26_VALUE 0x0 ++#define MC_DC27_VALUE 0x0 ++#define MC_DC28_VALUE 0x510 ++#define MC_DC29_VALUE 0x4E20 ++#define MC_DC30_VALUE 0x8235 ++#define MC_DC31_VALUE 0x0 ++#define MC_DC32_VALUE 0x0 ++#define MC_DC33_VALUE 0x0 ++#define MC_DC34_VALUE 0x0 ++#define MC_DC35_VALUE 0x0 ++#define MC_DC36_VALUE 0x0 ++#define MC_DC37_VALUE 0x0 ++#define MC_DC38_VALUE 0x0 ++#define MC_DC39_VALUE 0x0 ++#define MC_DC40_VALUE 0x0 ++#define MC_DC41_VALUE 0x0 ++#define MC_DC42_VALUE 0x0 ++#define MC_DC43_VALUE 0x0 ++#define MC_DC44_VALUE 0x0 ++#define MC_DC45_VALUE 0x500 ++#define MC_DC46_VALUE 0x0 +--- a/boards.cfg ++++ b/boards.cfg +@@ -505,6 +505,9 @@ Active mips mips32 au1x0 + Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org> + Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org> + Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org> ++Active mips mips32 danube arcadyan arv7506pw11 arv7506pw11_brn arv7506pw11:SYS_BOOT_BRN Mathias Kresin <dev@kresin.me> ++Active mips mips32 danube arcadyan arv7506pw11 arv7506pw11_nor arv7506pw11:SYS_BOOT_NOR Mathias Kresin <dev@kresin.me> ++Active mips mips32 danube arcadyan arv7506pw11 arv7506pw11_ram arv7506pw11:SYS_BOOT_RAM Mathias Kresin <dev@kresin.me> + Active mips mips32 danube arcadyan arv7510pw arv7510pw_brn arv7510pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org> + Active mips mips32 danube arcadyan arv7510pw arv7510pw_nor arv7510pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org> + Active mips mips32 danube arcadyan arv7510pw arv7510pw_ram arv7510pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org> +--- /dev/null ++++ b/include/configs/arv7506pw11.h +@@ -0,0 +1,62 @@ ++/* ++ * Copyright (C) 2016 Mathias Kresin <dev@kresin.me> ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#define CONFIG_MACH_TYPE "ARV7506PW11" ++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE ++#define CONFIG_BOARD_NAME "Arcadyan ARV7506PW11" ++ ++/* Configure SoC */ ++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */ ++ ++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */ ++ ++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */ ++ ++/* Switch devices */ ++#define CONFIG_SWITCH_MULTI ++#define CONFIG_SWITCH_RTL8306 ++ ++/* Environment */ ++#if defined(CONFIG_SYS_BOOT_BRN) ++#define CONFIG_SYS_TEXT_BASE 0x80002000 ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SYS_DISABLE_CACHE ++#define CONFIG_ENV_IS_NOWHERE ++#define CONFIG_ENV_OVERWRITE 1 ++#elif defined(CONFIG_SYS_BOOT_NOR) ++#define CONFIG_ENV_IS_IN_FLASH ++#define CONFIG_ENV_OVERWRITE ++#define CONFIG_ENV_OFFSET (256 * 1024) ++#define CONFIG_ENV_SECT_SIZE (64 * 1024) ++#else ++#define CONFIG_ENV_IS_NOWHERE ++#endif ++ ++#define CONFIG_ENV_SIZE (64 * 1024) ++ ++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR ++ ++/* Console */ ++#define CONFIG_LTQ_ADVANCED_CONSOLE ++#define CONFIG_BAUDRATE 115200 ++#define CONFIG_CONSOLE_ASC 1 ++#define CONFIG_CONSOLE_DEV "ttyLTQ1" ++ ++/* Pull in default board configs for Lantiq XWAY Danube */ ++#include <asm/lantiq/config.h> ++#include <asm/arch/config.h> ++ ++/* Pull in default OpenWrt configs for Lantiq SoC */ ++#include "openwrt-lantiq-common.h" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ CONFIG_ENV_LANTIQ_DEFAULTS \ ++ "kernel_addr=0xB0050000\0" ++ ++#endif /* __CONFIG_H */ |