diff options
Diffstat (limited to 'package/boot/uboot-layerscape/patches')
2 files changed, 112 insertions, 0 deletions
diff --git a/package/boot/uboot-layerscape/patches/0004-armv8-ls1088ardb-add-LEDE-boot-support-in-environmen.patch b/package/boot/uboot-layerscape/patches/0004-armv8-ls1088ardb-add-LEDE-boot-support-in-environmen.patch new file mode 100644 index 0000000000..72c43ebcd0 --- /dev/null +++ b/package/boot/uboot-layerscape/patches/0004-armv8-ls1088ardb-add-LEDE-boot-support-in-environmen.patch @@ -0,0 +1,58 @@ +From 479bf0c0bec2e99442214facf0f414c2c737ac7b Mon Sep 17 00:00:00 2001 +From: Yangbo Lu <yangbo.lu@nxp.com> +Date: Mon, 16 Oct 2017 11:57:36 +0800 +Subject: [PATCH] armv8: ls1088ardb: add LEDE boot support in environment + +Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> +--- + include/configs/ls1088ardb.h | 27 ++++++++++++++++++++++++++- + 1 file changed, 26 insertions(+), 1 deletion(-) + +diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h +index 7bd152d..4cefa40 100644 +--- a/include/configs/ls1088ardb.h ++++ b/include/configs/ls1088ardb.h +@@ -404,7 +404,20 @@ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ +- "bootm $load_addr#$BOARD\0" ++ "bootm $load_addr#$BOARD\0" \ ++ "lede_setenv=setenv loadaddr 82000000 && " \ ++ "setenv fdtaddr 8f000000 && " \ ++ "setenv bootargs root=/dev/mtdblock10 " \ ++ "rootfstype=ext4 noinitrd " \ ++ "earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 " \ ++ "mtdparts=20c0000.quadspi:1M(rcw),2M(u-boot),1M(u-boot-env)," \ ++ "6M(reserved-1),3M(mc),1M(dpl),1M(dpc),1M(dtb)," \ ++ "16M(kernel),17M(ext4rfs),15M(user)\0" \ ++ "lede_run=sf probe 0:0 && " \ ++ "sf read $fdtaddr f00000 100000 && " \ ++ "sf read $loadaddr 1000000 1000000 && " \ ++ "bootm $loadaddr - $fdtaddr\0" \ ++ "lede_boot=run lede_setenv;run lede_run\0" + + #undef CONFIG_BOOTCOMMAND + #if defined(CONFIG_QSPI_BOOT) +@@ -429,6 +442,18 @@ + "run distro_bootcmd;run sd_bootcmd;" \ + "env exists secureboot && esbc_halt;" + #endif ++ ++#undef CONFIG_BOOTCOMMAND ++#define CONFIG_BOOTCOMMAND \ ++ "sf probe 0:0;sf read 0x80000000 0xA00000 0x300000;" \ ++ "sf read 0x80300000 0xE00000 0x100000;" \ ++ "fsl_mc start mc 0x80000000 0x80300000;" \ ++ "sf read 0x80400000 0xd00000 0x100000;" \ ++ "fsl_mc apply dpl 0x80400000;" \ ++ "run lede_boot;" ++#undef CONFIG_BOOTDELAY ++#define CONFIG_BOOTDELAY 3 ++ + /* MAC/PHY configuration */ + #ifdef CONFIG_FSL_MC_ENET + #define CONFIG_PHYLIB_10G +-- +2.7.4 + diff --git a/package/boot/uboot-layerscape/patches/0005-armv8-ls2088ardb-add-LEDE-boot-support-in-environmen.patch b/package/boot/uboot-layerscape/patches/0005-armv8-ls2088ardb-add-LEDE-boot-support-in-environmen.patch new file mode 100644 index 0000000000..6da256ab06 --- /dev/null +++ b/package/boot/uboot-layerscape/patches/0005-armv8-ls2088ardb-add-LEDE-boot-support-in-environmen.patch @@ -0,0 +1,54 @@ +From 20f270670d1d5e14f3fd128f359535300a955ac8 Mon Sep 17 00:00:00 2001 +From: Yangbo Lu <yangbo.lu@nxp.com> +Date: Mon, 16 Oct 2017 12:37:05 +0800 +Subject: [PATCH] armv8: ls2088ardb: add LEDE boot support in environment + +Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> +--- + include/configs/ls2080ardb.h | 23 ++++++++++++++++++++++- + 1 file changed, 22 insertions(+), 1 deletion(-) + +diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h +index 8a34990..8ae3944 100644 +--- a/include/configs/ls2080ardb.h ++++ b/include/configs/ls2080ardb.h +@@ -432,7 +432,19 @@ unsigned long get_board_sys_clk(void); + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ +- "bootm $load_addr#$board\0" ++ "bootm $load_addr#$board\0" \ ++ "lede_setenv=setenv loadaddr 82000000 && " \ ++ "setenv fdtaddr 8f000000 && " \ ++ "setenv bootargs root=/dev/mtdblock9 " \ ++ "rootfstype=squashfs,jffs2 noinitrd " \ ++ "earlycon=uart8250,mmio,0x21c0500 console=ttyS1,115200 " \ ++ "mtdparts=580000000.nor:1M(rcw),2M(u-boot),1M(u-boot-env)," \ ++ "6M(reserved-1),3M(mc),1M(dpl),1M(dpc),1M(dtb)," \ ++ "16M(kernel),32M(rootfs),64M(otherbank)\0" \ ++ "lede_run=cp.b 580f00000 $fdtaddr 100000 && " \ ++ "cp.b 581000000 $loadaddr 1000000 && " \ ++ "bootm $loadaddr - $fdtaddr\0" \ ++ "lede_boot=run lede_setenv;run lede_run\0" + + #undef CONFIG_BOOTCOMMAND + #ifdef CONFIG_QSPI_BOOT +@@ -463,6 +475,15 @@ unsigned long get_board_sys_clk(void); + "env exists secureboot && esbc_halt;" + #endif + ++#undef CONFIG_BOOTCOMMAND ++#define CONFIG_BOOTCOMMAND \ ++ "fsl_mc start mc 0x580a00000 0x580e00000;" \ ++ "fsl_mc apply dpl 0x580d00000;" \ ++ "run lede_boot;" ++ ++#undef CONFIG_BOOTDELAY ++#define CONFIG_BOOTDELAY 3 ++ + #undef CONFIG_BOOTARGS + #define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ + "earlycon=uart8250,mmio,0x21c0600 " \ +-- +2.7.4 + |