diff options
Diffstat (limited to 'package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch')
| -rw-r--r-- | package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch b/package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch new file mode 100644 index 0000000000..65ae63c64d --- /dev/null +++ b/package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch @@ -0,0 +1,182 @@ +From 1f92596cc520f760589289059a5aa739366dd19c Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Tue, 26 Sep 2017 22:16:59 +0200 +Subject: sunxi: add device tree for Orange Pi R1 board + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + arch/arm/dts/Makefile | 1 + + arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 157 +++++++++++++++++++++++++++++ + 2 files changed, 158 insertions(+) + create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts + +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -310,6 +310,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \ + sun8i-a83t-cubietruck-plus.dtb \ + sun8i-a83t-sinovoip-bpi-m3.dtb + dtb-$(CONFIG_MACH_SUN8I_H3) += \ ++ sun8i-h2-plus-orangepi-r1.dtb \ + sun8i-h2-plus-orangepi-zero.dtb \ + sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-orangepi-2.dtb \ +--- /dev/null ++++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts +@@ -0,0 +1,157 @@ ++/* ++ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Based on sun8i-h2-plus-orangepi-zero.dts, which is: ++ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> ++ * ++ * Based on sun8i-h3-orangepi-one.dts, which is: ++ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include "sun8i-h3.dtsi" ++#include "sunxi-common-regulators.dtsi" ++ ++#include <dt-bindings/gpio/gpio.h> ++#include <dt-bindings/input/input.h> ++#include <dt-bindings/pinctrl/sun4i-a10.h> ++ ++/ { ++ model = "Xunlong Orange Pi R1"; ++ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus"; ++ ++ aliases { ++ serial0 = &uart0; ++ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ ++ ethernet1 = &xr819; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ pwr_led { ++ label = "orangepi:green:pwr"; ++ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; ++ }; ++ ++ status_led { ++ label = "orangepi:red:status"; ++ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ reg_vcc_wifi: reg_vcc_wifi { ++ compatible = "regulator-fixed"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-wifi"; ++ enable-active-high; ++ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&emac { ++ phy = <&phy1>; ++ phy-mode = "mii"; ++ allwinner,use-internal-phy; ++ allwinner,leds-active-low; ++ status = "okay"; ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ ++ cd-inverted; ++ status = "okay"; ++}; ++ ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins_a>; ++ vmmc-supply = <®_vcc_wifi>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ /* ++ * Explicitly define the sdio device, so that we can add an ethernet ++ * alias for it (which e.g. makes u-boot set a mac-address). ++ */ ++ xr819: sdio_wifi@1 { ++ reg = <1>; ++ }; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++}; ++ ++&usbphy { ++ /* USB VBUS is always on */ ++ status = "okay"; ++}; |