diff options
Diffstat (limited to 'package/network/utils/iw/patches')
| -rw-r--r-- | package/network/utils/iw/patches/001-nl80211_h_sync.patch | 303 |
1 files changed, 273 insertions, 30 deletions
diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index 5084c5d45f..d935a1dc3e 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -55,7 +55,69 @@ * enum nl80211_commands - supported nl80211 commands * * @NL80211_CMD_UNSPEC: unspecified command to catch errors -@@ -571,6 +610,14 @@ +@@ -257,13 +296,14 @@ + * to get a list of all present wiphys. + * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or + * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, +- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the +- * attributes determining the channel width; this is used for setting +- * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, +- * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, +- * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. +- * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL +- * instead, the support here is for backward compatibility only. ++ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, ++ * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the ++ * channel width; this is used for setting monitor mode channel), ++ * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, ++ * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or ++ * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, ++ * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward ++ * compatibility only. + * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request + * or rename notification. Has attributes %NL80211_ATTR_WIPHY and + * %NL80211_ATTR_WIPHY_NAME. +@@ -312,7 +352,8 @@ + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, + * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. + * The channel to use can be set on the interface or be given using the +- * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. ++ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the ++ * attributes determining channel width. + * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP + * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface + * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP +@@ -497,11 +538,12 @@ + * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and + * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify + * the SSID (mainly for association, but is included in authentication +- * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used +- * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE +- * is used to specify the authentication type. %NL80211_ATTR_IE is used to +- * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) +- * to be added to the frame. ++ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + ++ * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the ++ * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the ++ * authentication type. %NL80211_ATTR_IE is used to define IEs ++ * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added ++ * to the frame. + * When used as an event, this reports reception of an Authentication + * frame in station and IBSS modes when the local MLME processed the + * frame, i.e., it was for the local STA and was received in correct +@@ -556,8 +598,9 @@ + * requests to connect to a specified network but without separating + * auth and assoc steps. For this, you need to specify the SSID in a + * %NL80211_ATTR_SSID attribute, and can optionally specify the association +- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, +- * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, ++ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, ++ * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, ++ * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and +@@ -571,6 +614,14 @@ * set of BSSID,frequency parameters is used (i.e., either the enforcing * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). @@ -70,26 +132,71 @@ * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within * the ESS in case the device is already associated and an association with * a different BSS is desired. -@@ -1101,6 +1148,9 @@ +@@ -640,6 +691,10 @@ + * four bytes for vendor frames including the OUI. The registration + * cannot be dropped, but is removed automatically when the netlink + * socket is closed. Multiple registrations can be made. ++ * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if ++ * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which ++ * case the registration can also be modified to include/exclude the ++ * flag, rather than requiring unregistration to change it. + * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for + * backward compatibility + * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This +@@ -739,7 +794,7 @@ + * various triggers. These triggers can be configured through this + * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For + * more background information, see +- * http://wireless.kernel.org/en/users/Documentation/WoWLAN. ++ * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. + * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification + * from the driver reporting the wakeup reason. In this case, the + * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason +@@ -1101,6 +1156,20 @@ * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame * content. The frame is ethernet data. * + * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration + * is passed using %NL80211_ATTR_TID_CONFIG attribute. + * ++ * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon ++ * frame. This event is used to indicate that a received Beacon frame was ++ * dropped because it did not include a valid MME MIC while beacon ++ * protection was enabled (BIGTK configured in station mode). ++ * ++ * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control ++ * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. ++ * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME ++ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included ++ * if the recipient acknowledged the frame. ++ * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ -@@ -1325,6 +1375,8 @@ enum nl80211_commands { +@@ -1325,6 +1394,12 @@ enum nl80211_commands { NL80211_CMD_PROBE_MESH_LINK, + NL80211_CMD_SET_TID_CONFIG, + ++ NL80211_CMD_UNPROT_BEACON, ++ ++ NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, ++ /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -@@ -1580,7 +1632,8 @@ enum nl80211_commands { +@@ -1370,7 +1445,8 @@ enum nl80211_commands { + * of &enum nl80211_chan_width, describing the channel width. See the + * documentation of the enum for more information. + * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the +- * channel, used for anything but 20 MHz bandwidth ++ * channel, used for anything but 20 MHz bandwidth. In S1G this is the ++ * operating channel center frequency. + * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the + * channel, used only for 80+80 MHz bandwidth + * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ +@@ -1580,7 +1656,8 @@ enum nl80211_commands { * flag is included, then control port frames are sent over NL80211 instead * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER @@ -99,7 +206,7 @@ * * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. -@@ -2373,6 +2426,53 @@ enum nl80211_commands { +@@ -2373,6 +2450,64 @@ enum nl80211_commands { * the allowed channel bandwidth configurations. (u8 attribute) * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. * @@ -146,6 +253,17 @@ + * entry without having to force a disconnection after the PMK timeout. If + * no roaming occurs between the reauth threshold and PMK expiration, + * disassociation is still forced. ++ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the ++ * %NL80211_CMD_REGISTER_FRAME command, see the description there. ++ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated ++ * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with ++ * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. ++ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the ++ * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. ++ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies ++ * ++ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from ++ * association request when used with NL80211_CMD_NEW_STATION). + * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. @@ -153,7 +271,7 @@ * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -2835,6 +2935,21 @@ enum nl80211_attrs { +@@ -2835,6 +2970,28 @@ enum nl80211_attrs { NL80211_ATTR_WIPHY_EDMG_CHANNELS, NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, @@ -170,29 +288,55 @@ + NL80211_ATTR_PMK_LIFETIME, + NL80211_ATTR_PMK_REAUTH_THRESHOLD, + ++ NL80211_ATTR_RECEIVE_MULTICAST, ++ NL80211_ATTR_WIPHY_FREQ_OFFSET, ++ NL80211_ATTR_CENTER_FREQ1_OFFSET, ++ NL80211_ATTR_SCAN_FREQ_KHZ, ++ ++ NL80211_ATTR_HE_6GHZ_CAPABILITY, ++ + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -3554,6 +3669,8 @@ enum nl80211_wmm_rule { +@@ -3413,6 +3570,8 @@ enum nl80211_mpath_info { + * defined in HE capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently + * defined ++ * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), ++ * given for all 6 GHz band channels + * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use + */ + enum nl80211_band_iftype_attr { +@@ -3423,6 +3582,7 @@ enum nl80211_band_iftype_attr { + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, ++ NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, + + /* keep last */ + __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, +@@ -3554,6 +3714,9 @@ enum nl80211_wmm_rule { * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. * This is a nested attribute that contains the wmm limitation per AC. * (see &enum nl80211_wmm_rule) + * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel + * in current regulatory domain. ++ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use -@@ -3583,6 +3700,7 @@ enum nl80211_frequency_attr { +@@ -3583,6 +3746,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_20MHZ, NL80211_FREQUENCY_ATTR_NO_10MHZ, NL80211_FREQUENCY_ATTR_WMM, + NL80211_FREQUENCY_ATTR_NO_HE, ++ NL80211_FREQUENCY_ATTR_OFFSET, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, -@@ -3780,6 +3898,7 @@ enum nl80211_sched_scan_match_attr { +@@ -3780,6 +3945,7 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed @@ -200,7 +344,7 @@ */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, -@@ -3797,6 +3916,7 @@ enum nl80211_reg_rule_flags { +@@ -3797,6 +3963,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_HT40PLUS = 1<<14, NL80211_RRF_NO_80MHZ = 1<<15, NL80211_RRF_NO_160MHZ = 1<<16, @@ -208,7 +352,23 @@ }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR -@@ -4503,6 +4623,7 @@ enum nl80211_key_default_types { +@@ -4351,6 +4518,7 @@ enum nl80211_bss_scan_width { + * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. + * Contains a nested array of signal strength attributes (u8, dBm), + * using the nesting index as the antenna number. ++ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz + * @__NL80211_BSS_AFTER_LAST: internal + * @NL80211_BSS_MAX: highest BSS attribute + */ +@@ -4375,6 +4543,7 @@ enum nl80211_bss { + NL80211_BSS_PARENT_TSF, + NL80211_BSS_PARENT_BSSID, + NL80211_BSS_CHAIN_SIGNAL, ++ NL80211_BSS_FREQUENCY_OFFSET, + + /* keep last */ + __NL80211_BSS_AFTER_LAST, +@@ -4503,6 +4672,7 @@ enum nl80211_key_default_types { * See &enum nl80211_key_default_types. * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. * Defaults to @NL80211_KEY_RX_TX. @@ -216,7 +376,7 @@ * * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute -@@ -4518,6 +4639,7 @@ enum nl80211_key_attributes { +@@ -4518,6 +4688,7 @@ enum nl80211_key_attributes { NL80211_KEY_TYPE, NL80211_KEY_DEFAULT_TYPES, NL80211_KEY_MODE, @@ -224,7 +384,7 @@ /* keep last */ __NL80211_KEY_AFTER_LAST, -@@ -4674,6 +4796,69 @@ enum nl80211_tx_power_setting { +@@ -4674,6 +4845,92 @@ enum nl80211_tx_power_setting { }; /** @@ -237,6 +397,17 @@ + NL80211_TID_CONFIG_DISABLE, +}; + ++/* enum nl80211_tx_rate_setting - TX rate configuration type ++ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate ++ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter ++ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter ++ */ ++enum nl80211_tx_rate_setting { ++ NL80211_TX_RATE_AUTOMATIC, ++ NL80211_TX_RATE_LIMITED, ++ NL80211_TX_RATE_FIXED, ++}; ++ +/* enum nl80211_tid_config_attr - TID specific configuration. + * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values + * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported @@ -244,12 +415,10 @@ + * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). + * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but + * per peer instead. -+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if no peer -+ * is selected, if set indicates that the new configuration overrides -+ * all previous peer configurations, otherwise previous peer specific -+ * configurations should be left untouched. If peer is selected then -+ * it will reset particular TID configuration of that peer and it will -+ * not accept other TID config attributes along with peer. ++ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates ++ * that the new configuration overrides all previous peer ++ * configurations, otherwise previous peer specific configurations ++ * should be left untouched. + * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) + * Its type is u16. + * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. @@ -265,12 +434,23 @@ + * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and + * the max value is advertised by the driver in this attribute on + * output in wiphy capabilities. -+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs -+ * specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using -+ * the values from &nl80211_tid_config. ++ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation ++ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. ++ * Its type is u8, using the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs + * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using + * the values from &nl80211_tid_config. ++ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation ++ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. ++ * Its type is u8, using the values from &nl80211_tid_config. ++ * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful ++ * to notfiy the driver that what type of txrate should be used ++ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using ++ * the values form &nl80211_tx_rate_setting. ++ * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied ++ * with the parameters passed through %NL80211_ATTR_TX_RATES. ++ * configuration is applied to the data frame for the tid to that connected ++ * station. + */ +enum nl80211_tid_config_attr { + __NL80211_TID_CONFIG_ATTR_INVALID, @@ -284,6 +464,9 @@ + NL80211_TID_CONFIG_ATTR_RETRY_LONG, + NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, + NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, ++ NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, ++ NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, ++ NL80211_TID_CONFIG_ATTR_TX_RATE, + + /* keep last */ + __NL80211_TID_CONFIG_ATTR_AFTER_LAST, @@ -294,7 +477,32 @@ * enum nl80211_packet_pattern_attr - packet pattern attribute * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has -@@ -5484,6 +5669,26 @@ enum nl80211_feature_flags { +@@ -5144,6 +5401,8 @@ enum plink_actions { + + #define NL80211_KCK_LEN 16 + #define NL80211_KEK_LEN 16 ++#define NL80211_KCK_EXT_LEN 24 ++#define NL80211_KEK_EXT_LEN 32 + #define NL80211_REPLAY_CTR_LEN 8 + + /** +@@ -5152,6 +5411,7 @@ enum plink_actions { + * @NL80211_REKEY_DATA_KEK: key encryption key (binary) + * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) + * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) ++ * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) + * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) + * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) + */ +@@ -5160,6 +5420,7 @@ enum nl80211_rekey_data { + NL80211_REKEY_DATA_KEK, + NL80211_REKEY_DATA_KCK, + NL80211_REKEY_DATA_REPLAY_CTR, ++ NL80211_REKEY_DATA_AKM, + + /* keep last */ + NUM_NL80211_REKEY_DATA, +@@ -5484,6 +5745,39 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in * station mode (SAE password is passed as part of the connect command). * @@ -308,6 +516,8 @@ + * + * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection + * and can receive key configuration for BIGTK using key indexes 6 and 7. ++ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon ++ * protection as a client only and cannot transmit protected beacons. + * + * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the + * forwarding of preauth frames over the control port. They are then @@ -318,10 +528,21 @@ + * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations + * in IBSS mode, essentially by dropping their state. + * ++ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations ++ * are possible for multicast frames and those will be reported properly. ++ * ++ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and ++ * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to ++ * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be ++ * included in the scan request. ++ * ++ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver ++ * can report tx status for control port over nl80211 tx operations. ++ * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ -@@ -5529,6 +5734,12 @@ enum nl80211_ext_feature_index { +@@ -5529,6 +5823,16 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_EXT_KEY_ID, NL80211_EXT_FEATURE_STA_TX_PWR, NL80211_EXT_FEATURE_SAE_OFFLOAD, @@ -331,10 +552,32 @@ + NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, + NL80211_EXT_FEATURE_PROTECTED_TWT, + NL80211_EXT_FEATURE_DEL_IBSS_STA, ++ NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, ++ NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, ++ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, ++ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -@@ -6151,12 +6362,14 @@ enum nl80211_ftm_responder_stats { +@@ -5640,6 +5944,9 @@ enum nl80211_timeout_reason { + * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to + * only have supported rates and no additional capabilities (unless + * added by userspace explicitly.) ++ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with ++ * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means ++ * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. + */ + enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, +@@ -5655,6 +5962,7 @@ enum nl80211_scan_flags { + NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, + NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, + NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, ++ NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, + }; + + /** +@@ -6151,12 +6459,14 @@ enum nl80211_ftm_responder_stats { * @NL80211_PREAMBLE_HT: HT preamble * @NL80211_PREAMBLE_VHT: VHT preamble * @NL80211_PREAMBLE_DMG: DMG preamble @@ -349,7 +592,7 @@ }; /** -@@ -6349,6 +6562,10 @@ enum nl80211_peer_measurement_attrs { +@@ -6349,6 +6659,10 @@ enum nl80211_peer_measurement_attrs { * is valid) * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating * the maximum FTMs per burst (if not present anything is valid) @@ -360,7 +603,7 @@ * * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number -@@ -6364,6 +6581,8 @@ enum nl80211_peer_measurement_ftm_capa { +@@ -6364,6 +6678,8 @@ enum nl80211_peer_measurement_ftm_capa { NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, @@ -369,7 +612,7 @@ /* keep last */ NUM_NL80211_PMSR_FTM_CAPA_ATTR, -@@ -6393,6 +6612,20 @@ enum nl80211_peer_measurement_ftm_capa { +@@ -6393,6 +6709,20 @@ enum nl80211_peer_measurement_ftm_capa { * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data * (flag) @@ -390,7 +633,7 @@ * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number -@@ -6409,6 +6642,8 @@ enum nl80211_peer_measurement_ftm_req { +@@ -6409,6 +6739,8 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, @@ -399,7 +642,7 @@ /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, -@@ -6548,5 +6783,51 @@ enum nl80211_obss_pd_attributes { +@@ -6548,5 +6880,51 @@ enum nl80211_obss_pd_attributes { NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, }; |