diff options
Diffstat (limited to 'target/linux/ath79/base-files/etc/hotplug.d/firmware')
-rw-r--r-- | target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 74 | ||||
-rw-r--r-- | target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 56 |
2 files changed, 65 insertions, 65 deletions
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index b4c1e1d26d..f183bc5720 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,8 +12,8 @@ ath9k_eeprom_die() { ath9k_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -27,7 +27,7 @@ ath9k_eeprom_extract() { ath9k_eeprom_extract_reverse() { local part=$1 local offset=$2 - local count=$3 + local count=$(($3)) local mtd local reversed local caldata @@ -59,8 +59,8 @@ xor() { ath9k_patch_fw_mac() { local mac=$1 - local mac_offset=$2 - local chksum_offset=$3 + local mac_offset=$(($2)) + local chksum_offset=$(($3)) local xor_mac local xor_fw_mac local xor_fw_chksum @@ -98,12 +98,12 @@ case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in avm,fritz4020) - ath9k_eeprom_extract_reverse "urlader" 5441 1088 + ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 0x2 ;; dlink,dir-842-c1|\ dlink,dir-842-c2|\ @@ -111,28 +111,28 @@ case "$FIRMWARE" in dlink,dir-859-a1|\ nec,wg1200cr|\ wd,mynet-n750) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2 ;; engenius,ecb1750) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 0x2 ;; engenius,epg5000|\ iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr|\ iodata,wn-ac1600dgr2|\ iodata,wn-ag300dgr) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2 ;; nec,wg800hp) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 0x2 ;; qihoo,c301) - ath9k_eeprom_extract "radiocfg" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2 + ath9k_eeprom_extract "radiocfg" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2 ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -142,28 +142,28 @@ case "$FIRMWARE" in "ath9k-eeprom-pci-0000:00:00.0.bin") case $board in avm,fritz300e) - ath9k_eeprom_extract_reverse "urloader" 5441 1088 + ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440 ;; buffalo,whr-g301n|\ buffalo,wzr-hp-g302h-a1a0|\ tplink,tl-wr841-v5|\ tplink,tl-wr941-v4) - ath9k_eeprom_extract "art" 4096 3768 + ath9k_eeprom_extract "art" 0x1000 0xeb8 ;; buffalo,wzr-hp-g450h) - ath9k_eeprom_extract "art" 4096 1088 + ath9k_eeprom_extract "art" 0x1000 0x440 ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ath9k_eeprom_extract "art" 20480 1088 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 2 + ath9k_eeprom_extract "art" 0x5000 0x440 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2 ;; ocedo,raccoon|\ tplink,tl-wdr3600-v1|\ tplink,tl-wdr4300-v1|\ tplink,tl-wdr4900-v2|\ winchannel,wb2000) - ath9k_eeprom_extract "art" 20480 1088 + ath9k_eeprom_extract "art" 0x5000 0x440 ;; netgear,wnr612-v2|\ on,n150r|\ @@ -181,21 +181,21 @@ case "$FIRMWARE" in ubnt,bullet-m|\ ubnt,nano-m|\ ubnt,rocket-m) - ath9k_eeprom_extract "art" 4096 4096 + ath9k_eeprom_extract "art" 0x1000 0x1000 ;; pqi,air-pen) - ath9k_eeprom_extract "art" 4096 2002 + ath9k_eeprom_extract "art" 0x1000 0x7d2 ;; ubnt,unifi) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ;; wd,mynet-n750) - ath9k_eeprom_extract "art" 20480 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 2 + ath9k_eeprom_extract "art" 0x5000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 0x2 ;; wd,mynet-wifi-rangeextender) - ath9k_eeprom_extract "art" 4096 4096 - ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 2 + ath9k_eeprom_extract "art" 0x1000 0x1000 + ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 0x2 ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -208,11 +208,11 @@ case "$FIRMWARE" in netgear,wndr3700|\ netgear,wndr3700v2|\ netgear,wndr3800) - ath9k_eeprom_extract "art" 4096 3768 + ath9k_eeprom_extract "art" 0x1000 0xeb8 ;; dlink,dir-825-b1) - ath9k_eeprom_extract "caldata" 4096 3768 - ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 524 + ath9k_eeprom_extract "caldata" 0x1000 0xeb8 + ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -225,11 +225,11 @@ case "$FIRMWARE" in netgear,wndr3700|\ netgear,wndr3700v2|\ netgear,wndr3800) - ath9k_eeprom_extract "art" 20480 3768 + ath9k_eeprom_extract "art" 0x5000 0xeb8 ;; dlink,dir-825-b1) - ath9k_eeprom_extract "caldata" 20480 3768 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 524 + ath9k_eeprom_extract "caldata" 0x5000 0xeb8 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c ;; *) ath9k_eeprom_die "board $board is not supported yet" diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index be2b6f1891..421fb7d66c 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -25,8 +25,8 @@ ath10kcal_die() { ath10kcal_from_file() { local source=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $source" @@ -34,8 +34,8 @@ ath10kcal_from_file() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -90,7 +90,7 @@ case "$FIRMWARE" in comfast,cf-wr650ac-v1|\ comfast,cf-wr650ac-v2|\ yuncore,a770) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ;; devolo,dvl1200e|\ devolo,dvl1200i|\ @@ -98,53 +98,53 @@ case "$FIRMWARE" in devolo,dvl1750e|\ devolo,dvl1750i|\ devolo,dvl1750x) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1) ;; dlink,dir-859-a1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") ;; elecom,wrc-1750ghbk2-i) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ;; engenius,ecb1750) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr) ;; engenius,epg5000|\ iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) ;; engenius,ews511ap) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; glinet,gl-ar750s) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) ;; glinet,gl-x750) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) ;; nec,wg800hp) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880) ;; ocedo,koala|\ ocedo,ursus) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc) ;; openmesh,om5p-ac-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; qihoo,c301) - ath10kcal_extract "radiocfg" 20480 2116 + ath10kcal_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ;; tplink,archer-a7-v5|\ @@ -152,29 +152,29 @@ case "$FIRMWARE" in tplink,archer-c7-v4|\ tplink,archer-c7-v5|\ tplink,archer-c25-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) ;; tplink,archer-c5-v1|\ tplink,archer-c7-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1) ;; tplink,archer-d50-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2) ;; tplink,re350k-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2) ;; tplink,re355-v1|\ tplink,re450-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; tplink,re450-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) ;; ubnt,unifiac-lite|\ @@ -185,7 +185,7 @@ case "$FIRMWARE" in ubnt,nanostation-ac|\ ubnt,nanostation-ac-loco|\ ubnt,unifiac-pro) - ath10kcal_extract "EEPROM" 20480 2116 + ath10kcal_extract "EEPROM" 0x5000 0x844 ;; esac ;; @@ -195,18 +195,18 @@ case "$FIRMWARE" in dlink,dir-842-c2|\ dlink,dir-842-c3|\ nec,wg1200cr) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; netgear,ex6400|\ netgear,ex7300) - ath10kcal_extract "caldata" 20480 12064 + ath10kcal_extract "caldata" 0x5000 0x2f20 ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc) ;; phicomm,k2t) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac") ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin @@ -216,7 +216,7 @@ case "$FIRMWARE" in tplink,archer-c60-v1|\ tplink,archer-c60-v2|\ tplink,archer-c6-v2) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin |