diff options
Diffstat (limited to 'target/linux/ath79/base-files')
11 files changed, 0 insertions, 1399 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds deleted file mode 100755 index 499fe0031c..0000000000 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ /dev/null @@ -1,307 +0,0 @@ -#!/bin/sh - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) -boardname="${board##*,}" - -case "$board" in -8dev,carambola2) - ucidef_set_led_netdev "lan" "LAN" "$boardname:orange:eth0" "eth0" - ucidef_set_led_switch "wan" "WAN" "$boardname:orange:eth1" "switch0" "0x04" - ;; -alfa-network,ap121f) - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" - ;; -avm,fritz300e) - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:green:rssi2" "wlan0" "40" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi3" "wlan0" "60" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi4" "wlan0" "80" "100" - ;; -avm,fritz4020) - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x1E" - ;; -buffalo,whr-g301n) - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0" - ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10" - ;; -comfast,cf-e110n-v2) - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1" - ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100" - ;; -comfast,cf-e120a-v3) - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1" - ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x04" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100" - ;; -comfast,cf-e313ac) - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02" - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100" - ;; -comfast,cf-e314n-v2) - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0" - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100" - ;; -comfast,cf-e5) - ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02" - ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:blue:rssi0" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:blue:rssi2" "wlan0" "66" "100" - ;; -dlink,dir-842-c1|\ -dlink,dir-842-c2|\ -dlink,dir-842-c3|\ -dlink,dir-859-a1) - ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20" - ;; -engenius,ecb1750) - ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0" - ;; -engenius,ews511ap) - ucidef_set_led_netdev "lan1" "LAN1" "$boardname:blue:lan1" "eth1" - ucidef_set_led_netdev "lan2" "LAN2" "$boardname:blue:lan2" "eth0" - ;; -etactica,eg200) - ucidef_set_led_netdev "lan" "LAN" "$boardname:red:eth0" "eth0" - ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33" - ;; -glinet,gl-ar150) - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02" - ;; -glinet,gl-ar300m-nand|\ -glinet,gl-ar300m-nor) - ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0" - ;; -glinet,gl-ar300m-lite) - ucidef_set_led_netdev "lan" "LAN" "gl-ar300m-lite:green:lan" "eth0" - ;; -glinet,gl-x750) - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" - ;; -netgear,wnr1000-v2|\ -netgear,wnr2000-v3) - ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" - ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04" - ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04" - ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04" - ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04" - ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02" - ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02" - ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02" - ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02" - ;; -netgear,wnr612-v2|\ -on,n150r) - ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0" - ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f" - ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f" - ;; -pcs,cap324) - ucidef_set_led_netdev "lan" "LAN" "pcs:lan:green" "eth0" - ;; -pcs,cr3000) - ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "pcs:blue:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "pcs:blue:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02" - ;; -qihoo,c301) - ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt" - ;; -tplink,archer-a7-v5|\ -tplink,archer-c7-v4|\ -tplink,archer-c7-v5) - ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20" - ;; -tplink,archer-c2-v3|\ -tplink,tl-wr1043nd-v4|\ -tplink,tl-wr1043n-v5) - ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ;; -tplink,archer-c6-v2) - ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C" - ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02" - ;; -tplink,archer-c25-v1|\ -tplink,tl-wr841-v9|\ -tplink,tl-wr841-v10|\ -tplink,tl-wr841-v11|\ -tplink,tl-wr841-v12|\ -tplink,tl-wr842n-v3) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ;; -tplink,archer-c58-v1|\ -tplink,archer-c59-v1|\ -tplink,archer-c59-v2|\ -tplink,archer-c60-v1|\ -tplink,archer-c60-v2) - ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E" - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ;; -tplink,archer-d50-v1) - ucidef_set_led_switch "lan" "LAN" "tp-link:white:lan" "switch0" "0x1c" - ucidef_set_led_switch "wan_data" "WAN Data" "tp-link:white:internet" "switch0" "0x02" "" "tx rx" - ucidef_set_led_switch "wan_link" "WAN Link" "tp-link:white:wan" "switch0" "0x02" "" "link" - ;; -tplink,cpe210-v1|\ -tplink,cpe220-v2|\ -tplink,cpe510-v1) - ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "30" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100" - ;; -tplink,cpe210-v2|\ -tplink,cpe210-v3) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "30" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100" - ;; -tplink,cpe510-v2|\ -tplink,cpe510-v3) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13" - ;; -tplink,cpe610-v1) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ;; -tplink,re355-v1|\ -tplink,re450-v1|\ -tplink,re450-v2) - ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx" - ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link" - ;; -tplink,tl-mr3020-v1|\ -tplink,tl-mr3040-v2) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ;; -tplink,tl-mr3420-v2|\ -tplink,tl-wr740n-v4|\ -tplink,tl-wr741nd-v4|\ -tplink,tl-wr841-v8|\ -tplink,tl-wr842n-v2) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ;; -tplink,tl-wr740n-v1|\ -tplink,tl-wr740n-v3|\ -tplink,tl-wr741-v1|\ -tplink,tl-wr743nd-v1|\ -tplink,tl-wr841-v5|\ -tplink,tl-wr941-v4) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10" - ;; -tplink,tl-wr940n-v3|\ -tplink,tl-wr940n-v4|\ -tplink,tl-wr941nd-v6) - ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:blue:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:blue:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:blue:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:blue:lan4" "switch0" "0x02" - ;; -trendnet,tew-823dru) - ucidef_set_led_netdev "wan" "WAN" "trendnet:green:planet" "eth0" - ;; -ubnt,bullet-m|\ -ubnt,bullet-m-xw|\ -ubnt,nanostation-m|\ -ubnt,nanostation-m-xw|\ -ubnt,rocket-m) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100" - ;; -ubnt,nanobeam-ac|\ -ubnt,nanostation-ac) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:blue:rssi0" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:blue:rssi1" "wlan0" "26" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:blue:rssi2" "wlan0" "51" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:blue:rssi3" "wlan0" "76" "100" - ;; -wd,mynet-wifi-rangeextender) - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:rssi-low" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimedium" "RSSIMED" "$boardname:blue:rssi-med" "wlan0" "33" "100" - ucidef_set_led_rssi "rssihigh" "RSSIMAX" "$boardname:blue:rssi-max" "wlan0" "66" "100" - ;; -yuncore,a770) - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x10" - ;; -zbtlink,zbt-wd323) - ucidef_set_led_switch "lan1" "LAN1" "zbt-wd323:orange:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "zbt-wd323:orange:lan2" "switch0" "0x08" - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network deleted file mode 100755 index b5209f7014..0000000000 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ /dev/null @@ -1,467 +0,0 @@ -#!/bin/sh - -. /lib/functions/system.sh -. /lib/functions/uci-defaults.sh -. /lib/functions/k2t.sh - -ath79_setup_interfaces() -{ - local board="$1" - - case "$board" in - adtran,bsap1800-v2|\ - adtran,bsap1840|\ - alfa-network,ap121f|\ - aruba,ap-105|\ - avm,fritz300e|\ - devolo,dvl1200i|\ - devolo,dvl1750c|\ - devolo,dvl1750i|\ - devolo,dvl1750x|\ - engenius,ecb1750|\ - glinet,gl-ar300m-lite|\ - netgear,ex6400|\ - netgear,ex7300|\ - ocedo,koala|\ - ocedo,raccoon|\ - pcs,cap324|\ - pisen,ts-d084|\ - pisen,wmb001n|\ - pisen,wmm003n|\ - pqi,air-pen|\ - tplink,cpe210-v2|\ - tplink,cpe210-v3|\ - tplink,cpe510-v2|\ - tplink,cpe510-v3|\ - tplink,cpe610-v1|\ - tplink,re350k-v1|\ - tplink,re355-v1|\ - tplink,re450-v1|\ - tplink,re450-v2|\ - tplink,tl-mr10u|\ - tplink,tl-mr3020-v1|\ - tplink,tl-mr3040-v2|\ - tplink,tl-wa901nd-v2|\ - tplink,tl-wr703n|\ - ubnt,bullet-m|\ - ubnt,bullet-m-xw|\ - ubnt,lap-120|\ - ubnt,nanobeam-ac|\ - ubnt,nanostation-ac-loco|\ - ubnt,rocket-m|\ - ubnt,unifiac-lite|\ - ubnt,unifiac-lr|\ - ubnt,unifiac-mesh|\ - ubnt,unifi|\ - wd,mynet-wifi-rangeextender|\ - winchannel,wb2000) - ucidef_set_interface_lan "eth0" - ;; - avm,fritz4020|\ - pcs,cr3000|\ - tplink,archer-c58-v1|\ - tplink,archer-c59-v1|\ - tplink,archer-c59-v2) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" - ;; - buffalo,bhr-4grv|\ - buffalo,wzr-hp-g450h) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" - ;; - buffalo,bhr-4grv2|\ - trendnet,tew-823dru) - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0" - ;; - buffalo,whr-g301n) - ucidef_set_interface_wan "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - buffalo,wzr-hp-ag300h|\ - tplink,archer-c25-v1|\ - tplink,tl-mr3220-v1|\ - tplink,tl-mr3420-v1|\ - tplink,tl-wdr3500-v1|\ - tplink,tl-wr841-v7|\ - tplink,tl-wr841-v9|\ - tplink,tl-wr841-v10|\ - tplink,tl-wr841-v11|\ - tplink,tl-wr841-v12|\ - tplink,tl-wr842n-v1|\ - tplink,tl-wr842n-v3|\ - tplink,tl-wr940n-v3|\ - tplink,tl-wr940n-v4|\ - tplink,tl-wr941nd-v6|\ - ubnt,airrouter) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - buffalo,wzr-hp-g302h-a1a0) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan" - ;; - comfast,cf-e110n-v2|\ - comfast,cf-e120a-v3|\ - comfast,cf-e314n-v2|\ - tplink,cpe210-v1|\ - tplink,cpe220-v2|\ - tplink,cpe510-v1|\ - ubnt,nanostation-m|\ - ubnt,routerstation) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; - comfast,cf-wr650ac-v1|\ - comfast,cf-wr650ac-v2) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1" - ;; - devolo,dvl1200e|\ - devolo,dvl1750e|\ - ocedo,ursus) - ucidef_set_interface_lan "eth0 eth1" - ;; - dlink,dir-825-b1) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" - ;; - dlink,dir-825-c1|\ - dlink,dir-835-a1|\ - dlink,dir-842-c1|\ - dlink,dir-842-c2|\ - dlink,dir-842-c3|\ - dlink,dir-859-a1|\ - engenius,epg5000|\ - tplink,archer-c2-v3|\ - tplink,tl-wr1043nd-v4|\ - tplink,tl-wr1043n-v5) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" - ;; - elecom,wrc-1750ghbk2-i|\ - elecom,wrc-300ghbk2-i) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan" - ;; - embeddedwireless,dorin) - ucidef_add_switch "switch0" \ - "0@eth0" "1:wan" "2:lan:3" "3:lan:2" - ;; - engenius,ews511ap) - ucidef_set_interface_lan "eth0 eth1" "dhcp" - ;; - etactica,eg200) - ucidef_set_interface_lan "eth0" "dhcp" - ;; - glinet,gl-ar750) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" - ;; - glinet,gl-ar750s) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:2" "3:lan:1" "1:wan" - ;; - iodata,etg3-r|\ - iodata,wn-ac1167dgr|\ - iodata,wn-ac1600dgr|\ - iodata,wn-ac1600dgr2|\ - iodata,wn-ag300dgr|\ - pcs,cr5000|\ - sitecom,wlr-7100|\ - wd,mynet-n750) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" - ;; - librerouter,librerouter-v1) - ucidef_add_switch "switch0" \ - "0@eth0" "5:wan" "6@eth1" "4:lan" - ;; - nec,wg1200cr|\ - ubnt,nanostation-ac|\ - ubnt,unifiac-mesh-pro|\ - ubnt,unifiac-pro) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:wan" - ;; - nec,wg800hp) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" "4:lan" "1:wan" - ;; - netgear,wndr3700|\ - netgear,wndr3700v2|\ - netgear,wndr3800|\ - netgear,wndr3800ch) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0" - ucidef_add_switch_attr "switch0" "blinkrate" 2 - ucidef_add_switch_port_attr "switch0" 1 led 6 - ucidef_add_switch_port_attr "switch0" 2 led 9 - ucidef_add_switch_port_attr "switch0" 5 led 2 - ;; - netgear,wnr1000-v2|\ - netgear,wnr2000-v3|\ - netgear,wnr612-v2|\ - on,n150r|\ - tplink,tl-wr740n-v1|\ - tplink,tl-wr740n-v3|\ - tplink,tl-wr741-v1|\ - tplink,tl-wr743nd-v1|\ - tplink,tl-wr841-v5|\ - tplink,tl-wr941-v4) - ucidef_set_interface_wan "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" - ;; - phicomm,k2t) - ucidef_add_switch "switch0" \ - "0@eth0" "3:lan:1" "5:lan:2" "4:wan" - ;; - qihoo,c301) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" - ;; - rosinson,wr818) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:wan" - ;; - tplink,archer-a7-v5|\ - tplink,archer-c6-v2|\ - tplink,archer-c7-v4|\ - tplink,archer-c7-v5|\ - tplink,tl-wdr3600-v1|\ - tplink,tl-wdr4300-v1|\ - tplink,tl-wr941n-v7-cn) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" - ;; - tplink,archer-c5-v1|\ - tplink,archer-c7-v1|\ - tplink,archer-c7-v2|\ - tplink,tl-wdr4900-v2) - ucidef_add_switch "switch0" \ - "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan" - ;; - tplink,archer-c60-v1|\ - tplink,archer-c60-v2) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" - ;; - tplink,archer-d50-v1) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan" - ;; - tplink,tl-mr3420-v2|\ - tplink,tl-wr740n-v4|\ - tplink,tl-wr741nd-v4|\ - tplink,tl-wr841-v8|\ - tplink,tl-wr842n-v2) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" - ;; - tplink,tl-wr1043nd-v1) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" - ;; - tplink,tl-wr1043nd-v2|\ - tplink,tl-wr1043nd-v3) - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0" - ;; - tplink,tl-wr2543-v1) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0" - ;; - tplink,tl-wr941-v2) - ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" - ;; - ubnt,acb-isp) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:1" "3:lan:3" "4:lan:2" - ;; - ubnt,routerstation-pro) - ucidef_set_interface_wan "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - ubnt,nanostation-m-xw) - ucidef_add_switch "switch0" \ - "0@eth0" "5:lan" "1:wan" - ;; - zbtlink,zbt-wd323|\ - xiaomi,mi-router-4q) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "3:lan:1" "4:lan:2" - ;; - zyxel,nbg6716) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1" - ;; - *) - ucidef_set_interfaces_lan_wan "eth0" "eth1" - ;; - esac -} - -ath79_setup_macs() -{ - local board="$1" - - case "$board" in - adtran,bsap1800-v2|\ - adtran,bsap1840) - lan_mac=$(mtd_get_mac_binary "Board data" 2) - label_mac=$lan_mac - ;; - alfa-network,ap121f|\ - ubnt,airrouter|\ - ubnt,bullet-m|\ - ubnt,nanostation-m|\ - ubnt,rocket-m|\ - ubnt,unifi) - label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) - ;; - avm,fritz300e) - lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) - label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) - ;; - avm,fritz4020) - lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) - wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)")) - ;; - dlink,dir-825-b1) - lan_mac=$(mtd_get_mac_text "caldata" 0xffa0) - wan_mac=$(mtd_get_mac_text "caldata" 0xffb4) - ;; - dlink,dir-825-c1|\ - dlink,dir-835-a1) - lan_mac=$(mtd_get_mac_text "mac" 0x4) - wan_mac=$(mtd_get_mac_text "mac" 0x18) - ;; - dlink,dir-842-c1|\ - dlink,dir-842-c2|\ - dlink,dir-842-c3|\ - nec,wg1200cr) - lan_mac=$(mtd_get_mac_ascii devdata "lanmac") - wan_mac=$(mtd_get_mac_ascii devdata "wanmac") - label_mac=$lan_mac - ;; - dlink,dir-859-a1|\ - qihoo,c301|\ - wd,mynet-n750) - lan_mac=$(mtd_get_mac_ascii devdata "lanmac") - wan_mac=$(mtd_get_mac_ascii devdata "wanmac") - ;; - elecom,wrc-1750ghbk2-i|\ - elecom,wrc-300ghbk2-i) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" -2) - ;; - engenius,ecb1750) - lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) - label_mac=$(mtd_get_mac_ascii u-boot-env athaddr) - ;; - engenius,epg5000) - lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) - wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) - ;; - engenius,ews511ap) - lan_mac=$(mtd_get_mac_text "u-boot-env" 0xe9) - eth1_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac" - ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac" - ;; - iodata,etg3-r) - lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" -1) - label_mac=$wan_mac - ;; - iodata,wn-ac1167dgr|\ - iodata,wn-ac1600dgr|\ - iodata,wn-ac1600dgr2|\ - iodata,wn-ag300dgr) - lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) - wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) - label_mac=$wan_mac - ;; - jjplus,ja76pf2) - wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n alias/ethaddr) - lan_mac=$(macaddr_add "$wan_mac" 1) - ;; - nec,wg800hp) - lan_mac=$(mtd_get_mac_text board_data 0x280) - wan_mac=$(mtd_get_mac_text board_data 0x480) - label_mac=$wan_mac - ;; - netgear,wndr3700|\ - netgear,wndr3700v2|\ - netgear,wndr3800) - lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0x0)") - ;; - phicomm,k2t) - lan_mac=$(k2t_get_mac "lan_mac") - wan_mac=$(k2t_get_mac "wan_mac") - ;; - rosinson,wr818) - wan_mac=$(mtd_get_mac_binary factory 0x0) - lan_mac=$(macaddr_setbit_la "$wan_mac") - ;; - sitecom,wlr-7100) - lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) - wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) - label_mac=$lan_mac - ;; - tplink,archer-a7-v5|\ - tplink,archer-c7-v4|\ - tplink,archer-c7-v5|\ - tplink,tl-wr1043nd-v4|\ - tplink,tl-wr1043n-v5) - base_mac=$(mtd_get_mac_binary info 0x8) - wan_mac=$(macaddr_add "$base_mac" 1) - ;; - tplink,tl-wr941-v2|\ - tplink,tl-wr941n-v7-cn) - base_mac=$(mtd_get_mac_binary u-boot 0x1fc00) - wan_mac=$(macaddr_add "$base_mac" 1) - ;; - trendnet,tew-823dru) - lan_mac=$(mtd_get_mac_text mac 0x4) - wan_mac=$(mtd_get_mac_text mac 0x18) - label_mac=$wan_mac - ;; - ubnt,routerstation|\ - ubnt,routerstation-pro) - wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa) - lan_mac=$(macaddr_add "$wan_mac" 1) - ;; - wd,mynet-wifi-rangeextender) - lan_mac=$(nvram get et0macaddr) - ;; - zyxel,nbg6716) - lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2) - wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3) - ;; - esac - - [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac - [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac - [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac -} - -board_config_update -board=$(board_name) -ath79_setup_interfaces $board -ath79_setup_macs $board -board_config_flush - -exit 0 diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches deleted file mode 100755 index d84d6cfe85..0000000000 --- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches +++ /dev/null @@ -1,66 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2018 OpenWrt.org -# - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) - -case "$board" in -adtran,bsap1800-v2|\ -adtran,bsap1840) - ucidef_add_gpio_switch "wifi1_ext_a" "5GHz External Antenna A" "489" "1" - ucidef_add_gpio_switch "wifi1_int_a" "5GHz Internal Antenna A" "493" - ucidef_add_gpio_switch "wifi1_ext_b" "5GHz External Antenna B" "494" "1" - ucidef_add_gpio_switch "wifi1_int_b" "5GHz Internal Antenna B" "495" - ucidef_add_gpio_switch "wifi1_ext_c" "5GHz External Antenna C" "496" "1" - ucidef_add_gpio_switch "wifi1_int_c" "5GHz Internal Antenna C" "497" - ucidef_add_gpio_switch "wifi0_ext_a" "2.4GHz External Antenna A" "505" "1" - ucidef_add_gpio_switch "wifi0_int_a" "2.4GHz Internal Antenna A" "506" - ucidef_add_gpio_switch "wifi0_ext_b" "2.4GHz External Antenna B" "507" "1" - ucidef_add_gpio_switch "wifi0_int_b" "2.4GHz Internal Antenna B" "508" - ucidef_add_gpio_switch "wifi0_ext_c" "2.4GHz External Antenna C" "509" "1" - ucidef_add_gpio_switch "wifi0_int_c" "2.4GHz Internal Antenna C" "510" - ;; -comfast,cf-e5) - ucidef_add_gpio_switch "lte_power" "LTE Power" "14" "1" - ucidef_add_gpio_switch "lte_wakeup" "LTE Wakeup" "11" "1" - ucidef_add_gpio_switch "lte_poweroff" "LTE Poweroff" "1" "1" - ucidef_add_gpio_switch "lte_reset" "LTE Reset" "12" "1" - ;; -dlink,dir-825-c1|\ -dlink,dir-835-a1) - ucidef_add_gpio_switch "wan_led_auto" "WAN LED Auto" "20" "0" - ;; -librerouter,librerouter-v1) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0" - ;; -tplink,archer-c25-v1) - ucidef_add_gpio_switch "led_control" "LED control" "21" "0" - ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1" - ;; -tplink,cpe210-v1|\ -tplink,cpe220-v2|\ -tplink,cpe510-v1) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20" - ;; -ubnt,nanostation-ac) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3" - ;; -ubnt,acb-isp) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "11" - ;; -zbtlink,zbt-wd323) - ucidef_add_gpio_switch "io0" "IO#0" "0" - ucidef_add_gpio_switch "io1" "IO#1" "1" - ucidef_add_gpio_switch "io2" "IO#2" "2" - ucidef_add_gpio_switch "io14" "IO#14" "14" - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom deleted file mode 100644 index 14cfe64a41..0000000000 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ /dev/null @@ -1,161 +0,0 @@ -#!/bin/sh - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/caldata.sh - -board=$(board_name) - -case "$FIRMWARE" in -"ath9k-eeprom-ahb-18100000.wmac.bin") - case $board in - avm,fritz4020) - caldata_extract_reverse "urlader" 0x1541 0x440 - ;; - dlink,dir-825-c1|\ - dlink,dir-835-a1) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_text "mac" 0x4) - ;; - dlink,dir-842-c1|\ - dlink,dir-842-c2|\ - dlink,dir-842-c3|\ - dlink,dir-859-a1|\ - nec,wg1200cr|\ - wd,mynet-n750) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac") - ;; - engenius,ecb1750) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) - ;; - engenius,epg5000|\ - iodata,wn-ac1167dgr|\ - iodata,wn-ac1600dgr|\ - iodata,wn-ac1600dgr2|\ - iodata,wn-ag300dgr|\ - sitecom,wlr-7100) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr) - ;; - nec,wg800hp) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_text board_data 0x680) - ;; - qihoo,c301) - caldata_extract "radiocfg" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac") - ;; - zyxel,nbg6716) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr) - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -"ath9k-eeprom-pci-0000:00:00.0.bin") - case $board in - avm,fritz300e) - caldata_extract_reverse "urloader" 0x1541 0x440 - ;; - buffalo,whr-g301n|\ - buffalo,wzr-hp-g302h-a1a0|\ - tplink,tl-wr841-v5|\ - tplink,tl-wr941-v4) - caldata_extract "art" 0x1000 0xeb8 - ;; - buffalo,wzr-hp-g450h) - caldata_extract "art" 0x1000 0x440 - ;; - dlink,dir-825-c1|\ - dlink,dir-835-a1) - caldata_extract "art" 0x5000 0x440 - ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) - ;; - ocedo,raccoon|\ - tplink,tl-wdr3500-v1|\ - tplink,tl-wdr3600-v1|\ - tplink,tl-wdr4300-v1|\ - tplink,tl-wdr4900-v2|\ - winchannel,wb2000) - caldata_extract "art" 0x5000 0x440 - ;; - netgear,wnr1000-v2|\ - netgear,wnr2000-v3|\ - netgear,wnr612-v2|\ - on,n150r|\ - pcs,cap324|\ - tplink,tl-mr3220-v1|\ - tplink,tl-mr3420-v1|\ - tplink,tl-wr2543-v1|\ - tplink,tl-wr740n-v1|\ - tplink,tl-wr740n-v3|\ - tplink,tl-wr741-v1|\ - tplink,tl-wr743nd-v1|\ - tplink,tl-wr841-v7|\ - tplink,tl-wr842n-v1|\ - ubnt,airrouter|\ - ubnt,bullet-m|\ - ubnt,nano-m|\ - ubnt,rocket-m) - caldata_extract "art" 0x1000 0x1000 - ;; - pqi,air-pen) - caldata_extract "art" 0x1000 0x7d2 - ;; - ubnt,unifi) - caldata_extract "art" 0x1000 0x800 - ;; - wd,mynet-n750) - caldata_extract "art" 0x5000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") - ;; - wd,mynet-wifi-rangeextender) - caldata_extract "art" 0x1000 0x1000 - ath9k_patch_mac $(nvram get wl0_hwaddr) - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -"ath9k-eeprom-pci-0000:00:11.0.bin") - case $board in - buffalo,wzr-hp-ag300h|\ - netgear,wndr3700|\ - netgear,wndr3700v2|\ - netgear,wndr3800|\ - netgear,wndr3800ch) - caldata_extract "art" 0x1000 0xeb8 - ;; - dlink,dir-825-b1) - caldata_extract "caldata" 0x1000 0xeb8 - ath9k_patch_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -"ath9k-eeprom-pci-0000:00:12.0.bin") - case $board in - buffalo,wzr-hp-ag300h|\ - netgear,wndr3700|\ - netgear,wndr3700v2|\ - netgear,wndr3800|\ - netgear,wndr3800ch) - caldata_extract "art" 0x5000 0xeb8 - ;; - dlink,dir-825-b1) - caldata_extract "caldata" 0x5000 0xeb8 - ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -esac diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata deleted file mode 100644 index 91e813f121..0000000000 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ /dev/null @@ -1,167 +0,0 @@ -#!/bin/sh - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/caldata.sh -. /lib/functions/k2t.sh - -board=$(board_name) - -case "$FIRMWARE" in -"ath10k/cal-pci-0000:00:00.0.bin") - case $board in - comfast,cf-wr650ac-v1|\ - comfast,cf-wr650ac-v2|\ - yuncore,a770) - caldata_extract "art" 0x5000 0x844 - ;; - devolo,dvl1200e|\ - devolo,dvl1200i|\ - devolo,dvl1750c|\ - devolo,dvl1750e|\ - devolo,dvl1750i|\ - devolo,dvl1750x) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1) - ;; - dlink,dir-859-a1) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") - ;; - elecom,wrc-1750ghbk2-i) - caldata_extract "art" 0x5000 0x844 - ;; - engenius,ecb1750) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr) - ;; - engenius,epg5000|\ - iodata,wn-ac1167dgr|\ - iodata,wn-ac1600dgr2|\ - sitecom,wlr-7100) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) - ;; - engenius,ews511ap) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) - ;; - glinet,gl-ar750|\ - glinet,gl-ar750s) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) - ;; - glinet,gl-x750) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) - ;; - nec,wg800hp) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(mtd_get_mac_text board_data 0x880) - ;; - ocedo,koala|\ - ocedo,ursus) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(mtd_get_mac_binary art 0xc) - ;; - openmesh,om5p-ac-v2) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) - ;; - qihoo,c301) - caldata_extract "radiocfg" 0x5000 0x844 - ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac) - ;; - tplink,archer-a7-v5|\ - tplink,archer-c2-v3|\ - tplink,archer-c7-v4|\ - tplink,archer-c7-v5|\ - tplink,archer-c25-v1) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) - ;; - tplink,archer-c5-v1|\ - tplink,archer-c7-v2) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1) - ;; - tplink,archer-d50-v1) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2) - ;; - tplink,re350k-v1) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2) - ;; - tplink,re355-v1|\ - tplink,re450-v1) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) - ;; - tplink,re450-v2) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) - ;; - ubnt,unifiac-lite|\ - ubnt,unifiac-lr|\ - ubnt,unifiac-mesh|\ - ubnt,unifiac-mesh-pro|\ - ubnt,lap-120|\ - ubnt,nanobeam-ac|\ - ubnt,nanostation-ac|\ - ubnt,nanostation-ac-loco|\ - ubnt,unifiac-pro) - caldata_extract "EEPROM" 0x5000 0x844 - ;; - zyxel,nbg6716) - caldata_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) - ;; - esac - ;; -"ath10k/pre-cal-pci-0000:00:00.0.bin") - case $board in - comfast,cf-e313ac) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(mtd_get_mac_binary art 0x6) - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin - ;; - dlink,dir-842-c1|\ - dlink,dir-842-c2|\ - dlink,dir-842-c3|\ - nec,wg1200cr) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac) - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ;; - netgear,ex6400|\ - netgear,ex7300) - caldata_extract "caldata" 0x5000 0x2f20 - ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc) - ;; - phicomm,k2t) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(k2t_get_mac "5g_mac") - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ;; - tplink,archer-c58-v1|\ - tplink,archer-c59-v1|\ - tplink,archer-c59-v2|\ - tplink,archer-c60-v1|\ - tplink,archer-c60-v2|\ - tplink,archer-c6-v2) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1) - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ;; - esac - ;; -*) - exit 1 - ;; -esac diff --git a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac deleted file mode 100644 index 8c8b7932bc..0000000000 --- a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ /dev/null @@ -1,45 +0,0 @@ -#!/bin/ash - -[ "$ACTION" = "add" ] || exit 0 - -PHYNBR=${DEVPATH##*/phy} - -[ -n $PHYNBR ] || exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh -. /lib/functions/k2t.sh - -board=$(board_name) - -case "$board" in - adtran,bsap1800-v2|\ - adtran,bsap1840) - macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress - ;; - iodata,wn-ac1600dgr) - # There is no eeprom data for 5 GHz wlan in "art" partition - # which would allow to patch the macaddress - [ "$PHYNBR" -eq 0 ] && \ - macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress - ;; - iodata,wn-ag300dgr) - # There is no eeprom data for 5 GHz wlan in "art" partition - # which would allow to patch the macaddress - [ "$PHYNBR" -eq 1 ] && \ - macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress - ;; - phicomm,k2t) - # The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address - [ "$PHYNBR" -eq 1 ] && \ - k2t_get_mac "lan_mac" > /sys${DEVPATH}/macaddress - ;; - trendnet,tew-823dru) - # set the 2.4G interface mac address to LAN MAC - [ "$PHYNBR" -eq 1 ] && \ - mtd_get_mac_text mac 4 > /sys${DEVPATH}/macaddress - # set the 5G interface mac address to WAN MAC + 1 - [ "$PHYNBR" -eq 0 ] && \ - macaddr_add "$(mtd_get_mac_text mac 0x18)" 1 > /sys${DEVPATH}/macaddress - ;; -esac diff --git a/target/linux/ath79/base-files/etc/init.d/bootcount b/target/linux/ath79/base-files/etc/init.d/bootcount deleted file mode 100755 index 7807559d81..0000000000 --- a/target/linux/ath79/base-files/etc/init.d/bootcount +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh /etc/rc.common - -START=99 - -boot() { - case $(board_name) in - adtran,bsap1800-v2|\ - adtran,bsap1840) - fconfig -s -w -d $(find_mtd_part "RedBoot config") -n boot_cntb -x 0 - ;; - qihoo,c301) - local n=$(fw_printenv activeregion | cut -d = -f 2) - fw_setenv "image${n}trynum" 0 - ;; - esac -} diff --git a/target/linux/ath79/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/base-files/etc/uci-defaults/04_led_migration deleted file mode 100644 index b23e5f7db6..0000000000 --- a/target/linux/ath79/base-files/etc/uci-defaults/04_led_migration +++ /dev/null @@ -1,39 +0,0 @@ -#!/bin/sh - -. /lib/functions.sh -. /lib/functions/migrations.sh - -board=$(board_name) -boardonly="${board##*,}" - -case "$board" in -engenius,epg5000) - migrate_leds ":wlan-2g=:wlan2g" ":wlan-5g=:wlan5g" - ;; -tplink,archer-c25-v1|\ -tplink,archer-c58-v1|\ -tplink,archer-c59-v1|\ -tplink,archer-c59-v2|\ -tplink,archer-c60-v1|\ -tplink,archer-c60-v2|\ -tplink,archer-c7-v4|\ -tplink,archer-c7-v5) - migrate_leds "^$boardonly:=tp-link:" - ;; -tplink,archer-c7-v2) - migrate_leds ":blue:=:green:" - ;; -tplink,re355-v1) - migrate_leds "re355:=tp-link:" - ;; -tplink,re450-v1) - migrate_leds "re450:=tp-link:" - ;; -wd,mynet-n750) - migrate_leds "wd:=mynet-n750:" - ;; -esac - -migrations_apply system - -exit 0 diff --git a/target/linux/ath79/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ath79/base-files/etc/uci-defaults/09_fix-checksum deleted file mode 100644 index 22c9483e74..0000000000 --- a/target/linux/ath79/base-files/etc/uci-defaults/09_fix-checksum +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/sh -. /lib/functions.sh - -fix_seama_header() { - local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd) - [ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware -} - -board=$(board_name) - -case "$board" in -qihoo,c301) - fix_seama_header - ;; -esac diff --git a/target/linux/ath79/base-files/lib/functions/k2t.sh b/target/linux/ath79/base-files/lib/functions/k2t.sh deleted file mode 100755 index 1158df818b..0000000000 --- a/target/linux/ath79/base-files/lib/functions/k2t.sh +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2018 Weijie Gao <hackpascal@gmail.com> -# -# Helper function to extract mac addresses from mtd part for Phicomm K2T -# - -. /lib/functions.sh -. /lib/functions/system.sh -. /usr/share/libubox/jshn.sh - -k2t_config_load() { - local mtd_blk=$(find_mtd_part config) - - if [ -z "$mtd_blk" ]; then - echo "k2t_config_load: no mtd part named config" >&2 - exit 1 - fi - - local json_size=$(dd if=$mtd_blk bs=1 count=8 2>/dev/null) - - json_size="0x$json_size" - json_size=$((json_size)) - - if [ "$?" -ne 0 ]; then - echo "k2t_config_load: invalid json data size" >&2 - exit 2 - fi - - if [ "$json_size" -eq 0 ]; then - echo "k2t_config_load: empty json data" >&2 - exit 3 - fi - - local json_data=$(dd if=$mtd_blk bs=1 skip=8 count=$json_size 2>/dev/null) - - json_load "$json_data" -} - -k2t_get_mac() { - local old_ns - - json_set_namespace "k2t" old_ns - - if k2t_config_load; then - json_select "this_dev_info" - json_get_var val "$1" - json_select .. - fi - - json_set_namespace old_ns - - echo $val -} - diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh deleted file mode 100644 index 83c4e78d25..0000000000 --- a/target/linux/ath79/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,61 +0,0 @@ -# -# Copyright (C) 2011 OpenWrt.org -# - -PART_NAME=firmware -REQUIRE_IMAGE_METADATA=1 - -redboot_fis_do_upgrade() { - local append - local sysup_file="$1" - local kern_part="$2" - local magic=$(get_magic_word "$sysup_file") - - if [ "$magic" = "4349" ]; then - local kern_length=0x$(dd if="$sysup_file" bs=2 skip=1 count=4 2>/dev/null) - - [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" - dd if="$sysup_file" bs=64k skip=1 2>/dev/null | \ - mtd -r $append -F$kern_part:$kern_length:0x80060000,rootfs write - $kern_part:rootfs - - elif [ "$magic" = "7379" ]; then - local board_dir=$(tar tf $sysup_file | grep -m 1 '^sysupgrade-.*/$') - local kern_length=$(tar xf $sysup_file ${board_dir}kernel -O | wc -c) - - [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" - tar xf $sysup_file ${board_dir}kernel ${board_dir}root -O | \ - mtd -r $append -F$kern_part:$kern_length:0x80060000,rootfs write - $kern_part:rootfs - - else - echo "Unknown image, aborting!" - return 1 - fi -} - -platform_check_image() { - return 0 -} - -platform_do_upgrade() { - local board=$(board_name) - - case "$board" in - adtran,bsap1800-v2|\ - adtran,bsap1840) - redboot_fis_do_upgrade "$1" vmlinux_2 - ;; - jjplus,ja76pf2) - echo "Sysupgrade disabled due bug FS#2428" - ;; - ubnt,routerstation|\ - ubnt,routerstation-pro) - echo "Sysupgrade disabled due bug FS#2428" - ;; - zyxel,nbg6716) - nand_do_upgrade "$1" - ;; - *) - default_do_upgrade "$1" - ;; - esac -} |