diff options
Diffstat (limited to 'target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts')
| -rw-r--r-- | target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts | 158 |
1 files changed, 15 insertions, 143 deletions
diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts index 2249263522..90328078dd 100644 --- a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts +++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts @@ -1,10 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "qca955x.dtsi" +#include "qca955x_zyxel_nbg6x16.dtsi" / { compatible = "zyxel,nbg6716", "qca,qca9558"; @@ -61,59 +58,26 @@ gpios = <&gpio 21 GPIO_ACTIVE_LOW>; }; }; +}; - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - wifi { - label = "WiFi button"; - linux,code = <KEY_RFKILL>; - linux,input-type = <EV_SW>; - gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - debounce-interval = <60>; - }; - - usb1 { - label = "USB1 eject button"; - linux,code = <BTN_1>; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - usb2 { - label = "USB2 eject button"; - linux,code = <BTN_2>; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - wps { - label = "WPS button"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; +&keys { + usb1 { + label = "USB1 eject button"; + linux,code = <BTN_1>; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; }; -}; -&gpio { - usb_power { - gpio-hog; - gpios = <16 0>; - output-high; - line-name = "nbg6716:power:usb"; + usb2 { + label = "USB2 eject button"; + linux,code = <BTN_2>; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; }; }; -&uart { - status = "okay"; +&gpio_usb_power { + line-name = "nbg6716:power:usb"; }; &spi { @@ -196,71 +160,6 @@ }; }; -&mdio0 { - status = "okay"; - - phy17: ethernet-phy@11 { - reg = <0x11>; - phy-mode = "rgmii-id"; - }; - - switch0@1f { - compatible = "qca,ar8327"; - reg = <0x1f>; - qca,ar8327-initvals = < - 0x04 0x87600000 /* PORT0 PAD MODE CTRL */ - 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */ - 0x10 0x81000080 /* POWER_ON_STRAP */ - 0x50 0xffb7ffb7 /* LED_CTRL0 */ - 0x54 0xffb7ffb7 /* LED_CTRL1 */ - 0x58 0xffb7ffb7 /* LED_CTRL2 */ - 0x5c 0x03ffff00 /* LED_CTRL3 */ - 0x7c 0x0000007e /* PORT0_STATUS */ - 0x94 0x0000007e /* PORT6 STATUS */ - >; - }; -}; - -&mdio1 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "sgmii"; - }; -}; - - -ð0 { - status = "okay"; - - pll-data = <0xa6000000 0x00000101 0x00001616>; - phy-handle = <&phy17>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -ð1 { - status = "okay"; - - pll-data = <0x03000101 0x00000101 0x00001616>; - phy-handle = <&phy1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&wmac { - status = "okay"; - - mtd-cal-data = <&art 0x1000>; -}; - &pcie1 { status = "okay"; @@ -270,30 +169,3 @@ qcom,ath10k-calibration-variant = "ZyXEL-NBG6716"; }; }; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - - hub_port0: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - -}; - -&usb1 { - status = "okay"; - - hub_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; |