diff options
Diffstat (limited to 'target/linux/ath79/dts')
4 files changed, 71 insertions, 81 deletions
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts new file mode 100644 index 0000000000..fba08e4295 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts @@ -0,0 +1,22 @@ +/dts-v1/; + +#include "qca9531_glinet_gl-ar300m-nor.dts" + +/ { + compatible = "glinet,gl-ar300m-lite", "qca,qca9531"; + model = "GL.iNet GL-AR300M-Lite"; +}; + +// GL-AR300M-Lite has different LED colors than the non-Lite version + +&led_status { + label = "gl-ar300m-lite:red:status"; +}; + +&led_lan { + label = "gl-ar300m-lite:green:lan"; +}; + +&led_wlan { + label = "gl-ar300m-lite:green:wlan"; +};
\ No newline at end of file diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts index 9e78f83a76..26c30f2b72 100644 --- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts @@ -8,42 +8,8 @@ }; &spi { - status = "okay"; num-cs = <1>; - flash@0 { - compatible = "winbond,w25q128", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "reserved"; - reg = <0x050000 0xfa0000>; - }; - - art: partition@3 { - label = "art"; - reg = <0xff0000 0x010000>; - }; - }; - }; - flash@1 { compatible = "spinand,mt29f"; reg = <1>; diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts index 6b77af0401..02196cf9c4 100644 --- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts @@ -9,42 +9,3 @@ compatible = "glinet,gl-ar300m-nor", "qca,qca9531"; model = "GL.iNet GL-AR300M (NOR)"; }; - -&spi { - status = "okay"; - num-cs = <0>; - - flash@0 { - compatible = "winbond,w25q128", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x050000 0xfa0000>; - }; - - art: partition@3 { - label = "art"; - reg = <0xff0000 0x010000>; - }; - }; - }; -}; diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi index 55002b44e3..ceb2bfa0ff 100644 --- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi @@ -41,20 +41,22 @@ leds { compatible = "gpio-leds"; - wlan { - label = "gl-ar300m:green:wlan"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; + // Colors from non-Lite versions + + led_status: status { + label = "gl-ar300m:green:status"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; - lan { + led_lan: lan { label = "gl-ar300m:green:lan"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; - led_status: status { - label = "gl-ar300m:red:status"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + led_wlan: wlan { + label = "gl-ar300m:red:wlan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; }; }; @@ -63,6 +65,45 @@ status = "okay"; }; +&spi { + status = "okay"; + num-cs = <0>; + + flash@0 { + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@1 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@2 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + art: partition@3 { + label = "art"; + reg = <0xff0000 0x010000>; + }; + }; + }; +}; + &uart { status = "okay"; }; |