aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ath79')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/03_gpio_switches6
-rw-r--r--target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts166
-rw-r--r--target/linux/ath79/image/generic.mk9
5 files changed, 186 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 22a395c59f..6b3d5077d3 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -210,6 +210,10 @@ yuncore,a770)
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x10"
;;
+zbtlink,zbt-wd323)
+ ucidef_set_led_switch "lan1" "LAN1" "zbt-wd323:orange:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "zbt-wd323:orange:lan2" "switch0" "0x08"
+ ;;
esac
board_config_flush
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 105d4dbf8a..b68cf5742b 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -244,6 +244,7 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "5:lan" "1:wan"
;;
+ zbtlink,zbt-wd323|\
xiaomi,mi-router-4q)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
index 6a51a79790..1c8a46df19 100755
--- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
@@ -29,6 +29,12 @@ ubnt,nanostation-ac)
ubnt,acb-isp)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "11"
;;
+zbtlink,zbt-wd323)
+ ucidef_add_gpio_switch "io0" "IO#0" "0"
+ ucidef_add_gpio_switch "io1" "IO#1" "1"
+ ucidef_add_gpio_switch "io2" "IO#2" "2"
+ ucidef_add_gpio_switch "io14" "IO#14" "14"
+ ;;
esac
board_config_flush
diff --git a/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts b/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
new file mode 100644
index 0000000000..d899cff9ef
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+ model = "ZBT WD323";
+ compatible = "zbtlink,zbt-wd323", "qca,ar9344";
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio15 &enable_gpio19>;
+
+ sda-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ scl-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+
+ /* can be removed on 4.19 */
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
+ <&gpio 15 GPIO_ACTIVE_LOW>;
+
+ pcf8563: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio20_gpio22>;
+
+ wifi {
+ label = "zbt-wd323:green:wifi";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan1 {
+ label = "zbt-wd323:orange:lan1";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "zbt-wd323:orange:lan2";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+};
+
+&wdt {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio21>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&eth0 {
+ status = "okay";
+ phy-handle = <&swphy4>;
+ mtd-mac-address = <&art 0x0>;
+};
+
+&eth1 {
+ status = "okay";
+ mtd-mac-address = <&art 0x6>;
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <22000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot@0 {
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ uboot-env@40000 {
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware@50000 {
+ compatible = "denx,uimage";
+ reg = <0x50000 0xfa0000>;
+ };
+
+ art: art@ff0000 {
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x1002>;
+};
+
+&pinmux {
+ enable_gpio15: pinmux_enable_gpio15 {
+ pinctrl-single,bits = <0xc 0x0 0xff000000>;
+ };
+
+ enable_gpio19: pinmux_enable_gpio19 {
+ pinctrl-single,bits = <0x10 0x0 0xff000000>;
+ };
+
+ enable_gpio20_gpio22: pinmux_enable_gpio20_gpio22 {
+ pinctrl-single,bits = <0x14 0x0 0xff00ff>;
+ };
+
+ enable_gpio21: pinmux_enable_gpio21 {
+ pinctrl-single,bits = <0x14 0x0 0xff00>;
+ };
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 1585379f83..3c9b171d35 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -701,3 +701,12 @@ define Device/yuncore_a770
IMAGE_SIZE := 16000k
endef
TARGET_DEVICES += yuncore_a770
+
+define Device/zbtlink_zbt-wd323
+ ATH_SOC := ar9344
+ DEVICE_TITLE := ZBT WD323
+ IMAGE_SIZE := 16000k
+ DEVICE_PACKAGES := kmod-usb2 kmod-i2c-core kmod-i2c-gpio kmod-rtc-pcf8563 \
+ kmod-usb-serial kmod-usb-serial-cp210x uqmi
+endef
+TARGET_DEVICES += zbtlink_zbt-wd323