aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/atheros/patches-3.10
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/atheros/patches-3.10')
-rw-r--r--target/linux/atheros/patches-3.10/100-board.patch38
-rw-r--r--target/linux/atheros/patches-3.10/120-spiflash.patch8
-rw-r--r--target/linux/atheros/patches-3.10/130-watchdog.patch17
3 files changed, 33 insertions, 30 deletions
diff --git a/target/linux/atheros/patches-3.10/100-board.patch b/target/linux/atheros/patches-3.10/100-board.patch
index 5c81e02a16..4816667474 100644
--- a/target/linux/atheros/patches-3.10/100-board.patch
+++ b/target/linux/atheros/patches-3.10/100-board.patch
@@ -84,7 +84,7 @@
+obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
--- /dev/null
+++ b/arch/mips/ar231x/board.c
-@@ -0,0 +1,259 @@
+@@ -0,0 +1,260 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@@ -209,7 +209,7 @@
+ }
+
+ if (!found) {
-+ printk("Could not find Radio Configuration data\n");
++ pr_warn("WARNING: Could not find Radio Configuration data\n");
+ radio_config = 0;
+ }
+
@@ -243,7 +243,7 @@
+ }
+
+ if (!bcfg) {
-+ printk(KERN_WARNING "WARNING: No board configuration data found!\n");
++ pr_warn("WARNING: No board configuration data found!\n");
+ return -ENODEV;
+ }
+
@@ -251,10 +251,10 @@
+ ar231x_board.config = (struct ar231x_boarddata *) board_data;
+ memcpy(board_data, bcfg, 0x100);
+ if (broken_boarddata) {
-+ printk(KERN_WARNING "WARNING: broken board data detected\n");
++ pr_warn("WARNING: broken board data detected\n");
+ config = ar231x_board.config;
+ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
-+ printk(KERN_INFO "Fixing up empty mac addresses\n");
++ pr_info("Fixing up empty mac addresses\n");
+ config->reset_config_gpio = 0xffff;
+ config->sys_led_gpio = 0xffff;
+ random_ether_addr(config->wlan0_mac);
@@ -279,13 +279,14 @@
+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
+ ar231x_board.radio = radio_data;
+ offset = radio_data - board_data;
-+ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
++ pr_info("Radio config found at offset 0x%x (0x%x)\n", rcfg - bcfg,
++ offset);
+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
+ memcpy(radio_data, rcfg, rcfg_size);
+
+ mac_addr = &radio_data[0x1d * 2];
+ if (is_broadcast_ether_addr(mac_addr)) {
-+ printk(KERN_INFO "Radio MAC is blank; using board-data\n");
++ pr_info("Radio MAC is blank; using board-data\n");
+ memcpy(mac_addr, ar231x_board.config->wlan0_mac, ETH_ALEN);
+ }
+
@@ -1640,8 +1641,9 @@
+ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
+ u32 dma_addr = ar231x_read_reg(AR531X_DMAADDR); /* clears error */
+
-+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
-+ proc_addr, proc1, dma_addr, dma1);
++ pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x "
++ "DMAADDR=0x%8.8x DMA1=0x%8.8x\n", proc_addr, proc1, dma_addr,
++ dma1);
+
+ machine_restart("AHB error"); /* Catastrophic failure */
+ return IRQ_HANDLED;
@@ -2057,12 +2059,11 @@
+ gpch = &ar5312_gpio_chip;
+ ret = gpiochip_add(&gpch->chip);
+ if (ret) {
-+ printk(KERN_ERR "%s: failed to add gpiochip\n",
-+ gpch->chip.label);
++ pr_err("%s: failed to add gpiochip\n", gpch->chip.label);
+ return ret;
+ }
-+ printk(KERN_INFO "%s: registered %d GPIOs\n",
-+ gpch->chip.label, gpch->chip.ngpio);
++ pr_info("%s: registered %d GPIOs\n", gpch->chip.label,
++ gpch->chip.ngpio);
+ return ret;
+}
+
@@ -2108,7 +2109,7 @@
+
--- /dev/null
+++ b/arch/mips/ar231x/ar2315.c
-@@ -0,0 +1,692 @@
+@@ -0,0 +1,691 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@@ -2322,7 +2323,7 @@
+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
+ ar231x_read_reg(AR2315_AHB_ERR1);
+
-+ printk(KERN_ERR "AHB fatal error\n");
++ pr_emerg("AHB fatal error\n");
+ machine_restart("AHB error"); /* Catastrophic failure */
+
+ return IRQ_HANDLED;
@@ -2742,12 +2743,11 @@
+ gpch = &ar2315_gpio_chip;
+ ret = gpiochip_add(&gpch->chip);
+ if (ret) {
-+ printk(KERN_ERR "%s: failed to add gpiochip\n",
-+ gpch->chip.label);
++ pr_err("%s: failed to add gpiochip\n", gpch->chip.label);
+ return ret;
+ }
-+ printk(KERN_INFO "%s: registered %d GPIOs\n",
-+ gpch->chip.label, gpch->chip.ngpio);
++ pr_info("%s: registered %d GPIOs\n", gpch->chip.label,
++ gpch->chip.ngpio);
+ return ret;
+}
+
diff --git a/target/linux/atheros/patches-3.10/120-spiflash.patch b/target/linux/atheros/patches-3.10/120-spiflash.patch
index ef9cb91622..7876de18fb 100644
--- a/target/linux/atheros/patches-3.10/120-spiflash.patch
+++ b/target/linux/atheros/patches-3.10/120-spiflash.patch
@@ -251,7 +251,7 @@
+ flash_size = FLASH_16MB;
+ break;
+ default:
-+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
++ pr_warn(SPIFLASH "Read of flash device signature failed!\n");
+ return 0;
+ }
+
@@ -454,19 +454,19 @@
+
+ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
+ if (!priv->mmraddr) {
-+ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
++ dev_warn(&pdev->dev, SPIFLASH "Failed to map flash device\n");
+ goto error;
+ }
+
+ index = spiflash_probe_chip(priv);
+ if (!index) {
-+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
++ dev_warn(&pdev->dev, SPIFLASH "Found no flash device\n");
+ goto error;
+ }
+
+ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
+ if (!priv->readaddr) {
-+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
++ dev_warn(&pdev->dev, SPIFLASH "Failed to map flash device\n");
+ goto error;
+ }
+
diff --git a/target/linux/atheros/patches-3.10/130-watchdog.patch b/target/linux/atheros/patches-3.10/130-watchdog.patch
index 97b79b9a1d..7cc8fee9cb 100644
--- a/target/linux/atheros/patches-3.10/130-watchdog.patch
+++ b/target/linux/atheros/patches-3.10/130-watchdog.patch
@@ -1,6 +1,6 @@
--- /dev/null
+++ b/drivers/watchdog/ar2315-wtd.c
-@@ -0,0 +1,197 @@
+@@ -0,0 +1,200 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
@@ -80,10 +80,12 @@
+}
+
+static irqreturn_t
-+ar2315_wdt_interrupt(int irq, void *dev_id)
++ar2315_wdt_interrupt(int irq, void *dev)
+{
++ struct platform_device *pdev = (struct platform_device *)dev;
++
+ if (started) {
-+ printk(KERN_CRIT "watchdog expired, rebooting system\n");
++ dev_crit(&pdev->dev, "watchdog expired, rebooting system\n");
+ emergency_restart();
+ } else {
+ ar231x_write_reg(AR2315_WDC, 0);
@@ -150,15 +152,16 @@
+ int ret = 0;
+
+ ar2315_wdt_enable();
-+ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
++ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt,
++ IRQF_DISABLED, "ar2315_wdt", dev);
+ if (ret) {
-+ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
++ dev_err(&dev->dev, "failed to register inetrrupt\n");
+ goto out;
+ }
+
+ ret = misc_register(&ar2315_wdt_miscdev);
+ if(ret)
-+ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
++ dev_err(&dev->dev, "failed to register miscdev\n");
+
+out:
+ return ret;
@@ -186,7 +189,7 @@
+{
+ int ret = platform_driver_register(&ar2315_wdt_driver);
+ if(ret)
-+ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
++ pr_err("ar2315_wdt: error registering platfom driver!\n");
+ return ret;
+}
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 12:53:17 +0000