diff options
Diffstat (limited to 'target/linux/avr32-2.6/patches/100-git_sync.patch')
| -rw-r--r-- | target/linux/avr32-2.6/patches/100-git_sync.patch | 1505 |
1 files changed, 1418 insertions, 87 deletions
diff --git a/target/linux/avr32-2.6/patches/100-git_sync.patch b/target/linux/avr32-2.6/patches/100-git_sync.patch index 7653c5ff0c..e9e96144ec 100644 --- a/target/linux/avr32-2.6/patches/100-git_sync.patch +++ b/target/linux/avr32-2.6/patches/100-git_sync.patch @@ -1,7 +1,28 @@ +diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig linux-avr32.git/arch/avr32/boards/atngw100/Kconfig +--- linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-avr32.git/arch/avr32/boards/atngw100/Kconfig 2007-07-13 11:24:16.000000000 +0200 +@@ -0,0 +1,12 @@ ++# NGW100 customization ++ ++config BOARD_ATNGW100_I2C_GPIO ++ bool "Use GPIO for i2c instead of built-in TWI module" ++ help ++ The driver for the built-in TWI module has been plagued by ++ various problems, while the i2c-gpio driver is based on the ++ trusty old i2c-algo-bit bitbanging engine, making it work ++ on pretty much any setup. ++ ++ Choose 'Y' here if you're having i2c-related problems and ++ want to rule out the i2c bus driver. diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32.git/arch/avr32/boards/atngw100/setup.c --- linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/arch/avr32/boards/atngw100/setup.c 2007-07-12 13:59:49.000000000 +0200 -@@ -13,6 +13,7 @@ ++++ linux-avr32.git/arch/avr32/boards/atngw100/setup.c 2007-07-13 11:24:16.000000000 +0200 +@@ -9,10 +9,12 @@ + */ + #include <linux/clk.h> + #include <linux/etherdevice.h> ++#include <linux/i2c-gpio.h> + #include <linux/init.h> #include <linux/linkage.h> #include <linux/platform_device.h> #include <linux/types.h> @@ -9,7 +30,7 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32. #include <linux/spi/spi.h> #include <asm/io.h> -@@ -21,6 +22,7 @@ +@@ -21,6 +23,7 @@ #include <asm/arch/at32ap7000.h> #include <asm/arch/board.h> #include <asm/arch/init.h> @@ -17,7 +38,7 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32. /* Initialized by bootloader-specific startup code. */ struct tag *bootloader_tags __initdata; -@@ -39,6 +41,11 @@ +@@ -39,6 +42,11 @@ }, }; @@ -29,7 +50,7 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32. /* * The next two functions should go away as the boot loader is * supposed to initialize the macb address registers with a valid -@@ -100,8 +107,31 @@ +@@ -100,8 +108,46 @@ at32_setup_serial_console(0); } @@ -54,6 +75,21 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32. + } +}; + ++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO ++static struct i2c_gpio_platform_data i2c_gpio_data = { ++ .sda_pin = GPIO_PIN_PA(6), ++ .scl_pin = GPIO_PIN_PA(7), ++}; ++ ++static struct platform_device i2c_gpio_device = { ++ .name = "i2c-gpio", ++ .id = 0, ++ .dev = { ++ .platform_data = &i2c_gpio_data, ++ }, ++}; ++#endif ++ static int __init atngw100_init(void) { + unsigned i; @@ -61,7 +97,7 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32. /* * ATNGW100 uses 16-bit SDRAM interface, so we don't need to * reserve any pins for it. -@@ -115,6 +145,14 @@ +@@ -115,6 +161,22 @@ set_hw_addr(at32_add_device_eth(1, ð_data[1])); at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); @@ -73,6 +109,14 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32. + AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + } + platform_device_register(&ngw_gpio_leds); ++ ++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO ++ at32_select_gpio(i2c_gpio_data.sda_pin, 0); ++ at32_select_gpio(i2c_gpio_data.scl_pin, 0); ++ platform_device_register(&i2c_gpio_device); ++#else ++ at32_add_device_twi(0); ++#endif return 0; } @@ -328,33 +372,859 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig linux-avr32 +endif # stk 1002 diff -x .git -Nur linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig linux-avr32.git/arch/avr32/configs/atngw100_defconfig --- linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/arch/avr32/configs/atngw100_defconfig 2007-07-12 13:59:49.000000000 +0200 -@@ -712,7 +712,21 @@ ++++ linux-avr32.git/arch/avr32/configs/atngw100_defconfig 2007-07-13 11:24:16.000000000 +0200 +@@ -1,7 +1,7 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.22-rc5 +-# Sat Jun 23 15:40:05 2007 ++# Linux kernel version: 2.6.22.atmel.1 ++# Thu Jul 12 17:49:20 2007 + # + CONFIG_AVR32=y + CONFIG_GENERIC_GPIO=y +@@ -114,6 +114,7 @@ + CONFIG_CPU_AT32AP7000=y + # CONFIG_BOARD_ATSTK1000 is not set + CONFIG_BOARD_ATNGW100=y ++# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set + CONFIG_LOADER_U_BOOT=y + + # +@@ -122,6 +123,7 @@ + # CONFIG_AP7000_32_BIT_SMC is not set + CONFIG_AP7000_16_BIT_SMC=y + # CONFIG_AP7000_8_BIT_SMC is not set ++CONFIG_GPIO_DEV=y + CONFIG_LOAD_ADDRESS=0x10000000 + CONFIG_ENTRY_ADDRESS=0x90000000 + CONFIG_PHYS_OFFSET=0x10000000 +@@ -145,6 +147,7 @@ + # CONFIG_RESOURCES_64BIT is not set + CONFIG_ZONE_DMA_FLAG=0 + # CONFIG_OWNERSHIP_TRACE is not set ++CONFIG_DW_DMAC=y + # CONFIG_HZ_100 is not set + CONFIG_HZ_250=y + # CONFIG_HZ_300 is not set +@@ -153,6 +156,27 @@ + CONFIG_CMDLINE="" + + # ++# Power managment options ++# ++ ++# ++# CPU Frequency scaling ++# ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_TABLE=y ++# CONFIG_CPU_FREQ_DEBUG is not set ++CONFIG_CPU_FREQ_STAT=m ++# CONFIG_CPU_FREQ_STAT_DETAILS is not set ++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y ++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++CONFIG_CPU_FREQ_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set ++CONFIG_CPU_FREQ_AT32AP=y ++ ++# + # Bus options + # + # CONFIG_ARCH_SUPPORTS_MSI is not set +@@ -187,13 +211,8 @@ + # CONFIG_NET_KEY_MIGRATE is not set + CONFIG_INET=y + CONFIG_IP_MULTICAST=y +-CONFIG_IP_ADVANCED_ROUTER=y +-CONFIG_ASK_IP_FIB_HASH=y +-# CONFIG_IP_FIB_TRIE is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set + CONFIG_IP_FIB_HASH=y +-# CONFIG_IP_MULTIPLE_TABLES is not set +-# CONFIG_IP_ROUTE_MULTIPATH is not set +-# CONFIG_IP_ROUTE_VERBOSE is not set + CONFIG_IP_PNP=y + CONFIG_IP_PNP_DHCP=y + # CONFIG_IP_PNP_BOOTP is not set +@@ -240,6 +259,7 @@ + # CONFIG_NETWORK_SECMARK is not set + CONFIG_NETFILTER=y + # CONFIG_NETFILTER_DEBUG is not set ++CONFIG_BRIDGE_NETFILTER=y + + # + # Core Netfilter Configuration +@@ -284,6 +304,7 @@ + CONFIG_NETFILTER_XT_MATCH_MARK=m + CONFIG_NETFILTER_XT_MATCH_POLICY=m + CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set + CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m + CONFIG_NETFILTER_XT_MATCH_QUOTA=m + CONFIG_NETFILTER_XT_MATCH_REALM=m +@@ -359,13 +380,19 @@ + CONFIG_IP6_NF_MANGLE=m + CONFIG_IP6_NF_TARGET_HL=m + CONFIG_IP6_NF_RAW=m ++ ++# ++# Bridge: Netfilter Configuration ++# ++# CONFIG_BRIDGE_NF_EBTABLES is not set + # CONFIG_IP_DCCP is not set + # CONFIG_IP_SCTP is not set + # CONFIG_TIPC is not set + # CONFIG_ATM is not set +-# CONFIG_BRIDGE is not set ++CONFIG_BRIDGE=m + CONFIG_VLAN_8021Q=m + # CONFIG_DECNET is not set ++CONFIG_LLC=m + # CONFIG_LLC2 is not set + # CONFIG_IPX is not set + # CONFIG_ATALK is not set +@@ -521,7 +548,6 @@ + # + # Misc devices + # +-# CONFIG_BLINK is not set + # CONFIG_IDE is not set + + # +@@ -545,13 +571,26 @@ + # CONFIG_BONDING is not set + # CONFIG_EQUALIZER is not set + CONFIG_TUN=m +-# CONFIG_PHYLIB is not set ++CONFIG_PHYLIB=y ++ ++# ++# MII PHY device drivers ++# ++# CONFIG_MARVELL_PHY is not set ++# CONFIG_DAVICOM_PHY is not set ++# CONFIG_QSEMI_PHY is not set ++# CONFIG_LXT_PHY is not set ++# CONFIG_CICADA_PHY is not set ++# CONFIG_VITESSE_PHY is not set ++# CONFIG_SMSC_PHY is not set ++# CONFIG_BROADCOM_PHY is not set ++# CONFIG_FIXED_PHY is not set + + # + # Ethernet (10 or 100Mbit) + # + CONFIG_NET_ETHERNET=y +-CONFIG_MII=y ++# CONFIG_MII is not set + CONFIG_MACB=y + # CONFIG_NETDEV_1000 is not set + # CONFIG_NETDEV_10000 is not set +@@ -625,7 +664,15 @@ + # IPMI + # + # CONFIG_IPMI_HANDLER is not set +-# CONFIG_WATCHDOG is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_AT32AP700X_WDT=y ++CONFIG_AT32AP700X_WDT_TIMEOUT=2 + # CONFIG_HW_RANDOM is not set + # CONFIG_RTC is not set + # CONFIG_GEN_RTC is not set +@@ -636,7 +683,42 @@ + # TPM devices + # + # CONFIG_TCG_TPM is not set +-# CONFIG_I2C is not set ++CONFIG_I2C=m ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=m ++ ++# ++# I2C Algorithms ++# ++CONFIG_I2C_ALGOBIT=m ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++CONFIG_I2C_ATMELTWI=m ++CONFIG_I2C_ATMELTWI_BAUDRATE=100000 ++CONFIG_I2C_GPIO=m ++# CONFIG_I2C_OCORES is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_SIMTEC is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_SENSORS_DS1337 is not set ++# CONFIG_SENSORS_DS1374 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set + + # + # SPI support +@@ -655,7 +737,7 @@ + # SPI Protocol Masters + # + # CONFIG_SPI_AT25 is not set +-# CONFIG_SPI_SPIDEV is not set ++CONFIG_SPI_SPIDEV=m + + # + # Dallas's 1-wire bus +@@ -706,21 +788,59 @@ + # + # USB Gadget Support + # +-# CONFIG_USB_GADGET is not set +-# CONFIG_MMC is not set ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_PXA2XX is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++CONFIG_USB_GADGET_ATMEL_USBA=y ++CONFIG_USB_ATMEL_USBA=y ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++CONFIG_USB_ZERO=m ++CONFIG_USB_ETH=m ++CONFIG_USB_ETH_RNDIS=y ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_FILE_STORAGE=m ++# CONFIG_USB_FILE_STORAGE_TEST is not set ++CONFIG_USB_G_SERIAL=m ++# CONFIG_USB_MIDI_GADGET is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++ ++# ++# MMC/SD Host Controller Drivers ++# ++CONFIG_MMC_ATMELMCI=y + # # LED devices # -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + + # + # LED drivers + # ++CONFIG_LEDS_GPIO=y + + # + # LED Triggers + # ++CONFIG_LEDS_TRIGGERS=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y + + # + # InfiniBand support +@@ -733,7 +853,51 @@ + # + # Real Time Clock + # +-# CONFIG_RTC_CLASS is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set + +# -+# LED drivers ++# RTC interfaces +# -+CONFIG_LEDS_GPIO=y ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set + +# -+# LED Triggers ++# I2C RTC drivers +# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set + ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_RS5C348 is not set ++# CONFIG_RTC_DRV_MAX6902 is not set ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++CONFIG_RTC_DRV_AT32AP700X=y + + # + # DMA Engine support +@@ -767,7 +931,8 @@ + # CONFIG_OCFS2_FS is not set + # CONFIG_MINIX_FS is not set + # CONFIG_ROMFS_FS is not set +-# CONFIG_INOTIFY is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y + # CONFIG_QUOTA is not set + # CONFIG_DNOTIFY is not set + # CONFIG_AUTOFS_FS is not set +@@ -922,7 +1087,7 @@ + CONFIG_ENABLE_MUST_CHECK=y + CONFIG_MAGIC_SYSRQ=y + # CONFIG_UNUSED_SYMBOLS is not set +-# CONFIG_DEBUG_FS is not set ++CONFIG_DEBUG_FS=y + # CONFIG_HEADERS_CHECK is not set + CONFIG_DEBUG_KERNEL=y + # CONFIG_DEBUG_SHIRQ is not set +diff -x .git -Nur linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig linux-avr32.git/arch/avr32/configs/atstk1002_defconfig +--- linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig 2007-07-10 20:56:30.000000000 +0200 ++++ linux-avr32.git/arch/avr32/configs/atstk1002_defconfig 2007-07-13 11:24:16.000000000 +0200 +@@ -1,7 +1,7 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.22-rc5 +-# Sat Jun 23 15:32:08 2007 ++# Linux kernel version: 2.6.22.atmel.1 ++# Thu Jul 12 19:34:17 2007 + # + CONFIG_AVR32=y + CONFIG_GENERIC_GPIO=y +@@ -80,10 +80,10 @@ + # + CONFIG_MODULES=y + CONFIG_MODULE_UNLOAD=y +-# CONFIG_MODULE_FORCE_UNLOAD is not set ++CONFIG_MODULE_FORCE_UNLOAD=y + # CONFIG_MODVERSIONS is not set + # CONFIG_MODULE_SRCVERSION_ALL is not set +-# CONFIG_KMOD is not set ++CONFIG_KMOD=y + + # + # Block layer +@@ -99,12 +99,12 @@ + CONFIG_IOSCHED_NOOP=y + # CONFIG_IOSCHED_AS is not set + # CONFIG_IOSCHED_DEADLINE is not set +-# CONFIG_IOSCHED_CFQ is not set ++CONFIG_IOSCHED_CFQ=y + # CONFIG_DEFAULT_AS is not set + # CONFIG_DEFAULT_DEADLINE is not set +-# CONFIG_DEFAULT_CFQ is not set +-CONFIG_DEFAULT_NOOP=y +-CONFIG_DEFAULT_IOSCHED="noop" ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" + + # + # System Type and features +@@ -117,6 +117,11 @@ + CONFIG_BOARD_ATSTK1002=y + CONFIG_BOARD_ATSTK1000=y + # CONFIG_BOARD_ATNGW100 is not set ++# CONFIG_BOARD_ATSTK1002_CUSTOM is not set ++# CONFIG_BOARD_ATSTK1002_SPI1 is not set ++# CONFIG_BOARD_ATSTK1002_J2_LED is not set ++# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set ++# CONFIG_BOARD_ATSTK1002_J2_RGB is not set + CONFIG_LOADER_U_BOOT=y + + # +@@ -125,6 +130,7 @@ + # CONFIG_AP7000_32_BIT_SMC is not set + CONFIG_AP7000_16_BIT_SMC=y + # CONFIG_AP7000_8_BIT_SMC is not set ++CONFIG_GPIO_DEV=y + CONFIG_LOAD_ADDRESS=0x10000000 + CONFIG_ENTRY_ADDRESS=0x90000000 + CONFIG_PHYS_OFFSET=0x10000000 +@@ -148,6 +154,7 @@ + # CONFIG_RESOURCES_64BIT is not set + CONFIG_ZONE_DMA_FLAG=0 + # CONFIG_OWNERSHIP_TRACE is not set ++CONFIG_DW_DMAC=y + # CONFIG_HZ_100 is not set + CONFIG_HZ_250=y + # CONFIG_HZ_300 is not set +@@ -156,6 +163,27 @@ + CONFIG_CMDLINE="" + + # ++# Power managment options ++# ++ ++# ++# CPU Frequency scaling ++# ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_TABLE=y ++# CONFIG_CPU_FREQ_DEBUG is not set ++CONFIG_CPU_FREQ_STAT=m ++# CONFIG_CPU_FREQ_STAT_DETAILS is not set ++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y ++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++CONFIG_CPU_FREQ_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set ++CONFIG_CPU_FREQ_AT32AP=y ++ ++# + # Bus options + # + # CONFIG_ARCH_SUPPORTS_MSI is not set +@@ -327,6 +355,8 @@ + # + # Self-contained MTD device drivers + # ++CONFIG_MTD_DATAFLASH=m ++# CONFIG_MTD_M25P80 is not set + # CONFIG_MTD_SLRAM is not set + # CONFIG_MTD_PHRAM is not set + # CONFIG_MTD_MTDRAM is not set +@@ -373,7 +403,6 @@ + # + # Misc devices + # +-# CONFIG_BLINK is not set + # CONFIG_IDE is not set + + # +@@ -397,13 +426,26 @@ + # CONFIG_BONDING is not set + # CONFIG_EQUALIZER is not set + CONFIG_TUN=m +-# CONFIG_PHYLIB is not set ++CONFIG_PHYLIB=y ++ ++# ++# MII PHY device drivers ++# ++# CONFIG_MARVELL_PHY is not set ++# CONFIG_DAVICOM_PHY is not set ++# CONFIG_QSEMI_PHY is not set ++CONFIG_LXT_PHY=y ++# CONFIG_CICADA_PHY is not set ++# CONFIG_VITESSE_PHY is not set ++# CONFIG_SMSC_PHY is not set ++# CONFIG_BROADCOM_PHY is not set ++# CONFIG_FIXED_PHY is not set + + # + # Ethernet (10 or 100Mbit) + # + CONFIG_NET_ETHERNET=y +-CONFIG_MII=y ++# CONFIG_MII is not set + CONFIG_MACB=y + # CONFIG_NETDEV_1000 is not set + # CONFIG_NETDEV_10000 is not set +@@ -443,7 +485,42 @@ + # + # Input device support + # +-# CONFIG_INPUT is not set ++CONFIG_INPUT=m ++# CONFIG_INPUT_FF_MEMLESS is not set ++CONFIG_INPUT_POLLDEV=m ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=m ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_TSDEV is not set ++# CONFIG_INPUT_EVDEV is not set ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++# CONFIG_KEYBOARD_ATKBD is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++CONFIG_KEYBOARD_GPIO=m ++CONFIG_INPUT_MOUSE=y ++# CONFIG_MOUSE_PS2 is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++CONFIG_MOUSE_GPIO=m ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set + + # + # Hardware I/O ports +@@ -477,7 +554,15 @@ + # IPMI + # + # CONFIG_IPMI_HANDLER is not set +-# CONFIG_WATCHDOG is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_AT32AP700X_WDT=y ++CONFIG_AT32AP700X_WDT_TIMEOUT=2 + # CONFIG_HW_RANDOM is not set + # CONFIG_RTC is not set + # CONFIG_GEN_RTC is not set +@@ -488,13 +573,61 @@ + # TPM devices + # + # CONFIG_TCG_TPM is not set +-# CONFIG_I2C is not set ++CONFIG_I2C=m ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=m ++ ++# ++# I2C Algorithms ++# ++CONFIG_I2C_ALGOBIT=m ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++CONFIG_I2C_ATMELTWI=m ++CONFIG_I2C_ATMELTWI_BAUDRATE=100000 ++CONFIG_I2C_GPIO=m ++# CONFIG_I2C_OCORES is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_SIMTEC is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_SENSORS_DS1337 is not set ++# CONFIG_SENSORS_DS1374 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set + + # + # SPI support + # +-# CONFIG_SPI is not set +-# CONFIG_SPI_MASTER is not set ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++CONFIG_SPI_ATMEL=y ++# CONFIG_SPI_BITBANG is not set ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++CONFIG_SPI_SPIDEV=m + + # + # Dallas's 1-wire bus +@@ -517,14 +650,40 @@ + # + # Graphics support + # +-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++CONFIG_BACKLIGHT_LCD_SUPPORT=y ++CONFIG_LCD_CLASS_DEVICE=y ++CONFIG_LCD_LTV350QV=y ++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set + + # + # Display device support + # + # CONFIG_DISPLAY_SUPPORT is not set + # CONFIG_VGASTATE is not set +-# CONFIG_FB is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_SYS_FOPS is not set ++CONFIG_FB_DEFERRED_IO=y ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_S1D13XXX is not set ++CONFIG_FB_ATMEL=y ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_LOGO is not set + + # + # Sound +@@ -532,6 +691,11 @@ + # CONFIG_SOUND is not set + + # ++# HID Devices ++# ++# CONFIG_HID is not set ++ ++# + # USB support + # + # CONFIG_USB_ARCH_HAS_HCD is not set +@@ -545,21 +709,59 @@ + # + # USB Gadget Support + # +-# CONFIG_USB_GADGET is not set +-# CONFIG_MMC is not set ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_PXA2XX is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++CONFIG_USB_GADGET_ATMEL_USBA=y ++CONFIG_USB_ATMEL_USBA=y ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++CONFIG_USB_ZERO=m ++CONFIG_USB_ETH=m ++CONFIG_USB_ETH_RNDIS=y ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_FILE_STORAGE=m ++# CONFIG_USB_FILE_STORAGE_TEST is not set ++CONFIG_USB_G_SERIAL=m ++# CONFIG_USB_MIDI_GADGET is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++ ++# ++# MMC/SD Host Controller Drivers ++# ++CONFIG_MMC_ATMELMCI=y + + # + # LED devices + # +-# CONFIG_NEW_LEDS is not set ++CONFIG_NEW_LEDS=y ++CONFIG_LEDS_CLASS=m # # LED drivers + # ++CONFIG_LEDS_GPIO=m + + # + # LED Triggers + # ++CONFIG_LEDS_TRIGGERS=y ++CONFIG_LEDS_TRIGGER_TIMER=m ++CONFIG_LEDS_TRIGGER_HEARTBEAT=m + + # + # InfiniBand support +@@ -572,7 +774,50 @@ + # + # Real Time Clock + # +-# CONFIG_RTC_CLASS is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++# CONFIG_RTC_HCTOSYS is not set ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++ ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_RS5C348 is not set ++# CONFIG_RTC_DRV_MAX6902 is not set ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++CONFIG_RTC_DRV_AT32AP700X=y + + # + # DMA Engine support +@@ -590,11 +835,14 @@ + # + # File systems + # +-CONFIG_EXT2_FS=m ++CONFIG_EXT2_FS=y + # CONFIG_EXT2_FS_XATTR is not set + # CONFIG_EXT2_FS_XIP is not set +-# CONFIG_EXT3_FS is not set ++CONFIG_EXT3_FS=y ++# CONFIG_EXT3_FS_XATTR is not set + # CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set + # CONFIG_REISERFS_FS is not set + # CONFIG_JFS_FS is not set + # CONFIG_FS_POSIX_ACL is not set +@@ -609,7 +857,7 @@ + # CONFIG_DNOTIFY is not set + # CONFIG_AUTOFS_FS is not set + # CONFIG_AUTOFS4_FS is not set +-# CONFIG_FUSE_FS is not set ++CONFIG_FUSE_FS=m + + # + # CD-ROM/DVD Filesystems +@@ -638,7 +886,7 @@ + # CONFIG_TMPFS_POSIX_ACL is not set + # CONFIG_HUGETLB_PAGE is not set + CONFIG_RAMFS=y +-CONFIG_CONFIGFS_FS=m ++CONFIG_CONFIGFS_FS=y + + # + # Miscellaneous filesystems +@@ -683,8 +931,14 @@ + # CONFIG_SUNRPC_BIND34 is not set + # CONFIG_RPCSEC_GSS_KRB5 is not set + # CONFIG_RPCSEC_GSS_SPKM3 is not set +-# CONFIG_SMB_FS is not set +-# CONFIG_CIFS is not set ++CONFIG_SMB_FS=m ++# CONFIG_SMB_NLS_DEFAULT is not set ++CONFIG_CIFS=m ++# CONFIG_CIFS_STATS is not set ++# CONFIG_CIFS_WEAK_PW_HASH is not set ++# CONFIG_CIFS_XATTR is not set ++# CONFIG_CIFS_DEBUG2 is not set ++# CONFIG_CIFS_EXPERIMENTAL is not set + # CONFIG_NCP_FS is not set + # CONFIG_CODA_FS is not set + # CONFIG_AFS_FS is not set diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c linux-avr32.git/arch/avr32/drivers/dw-dmac.c --- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-avr32.git/arch/avr32/drivers/dw-dmac.c 2007-06-06 11:33:46.000000000 +0200 ++++ linux-avr32.git/arch/avr32/drivers/dw-dmac.c 2007-07-13 11:24:16.000000000 +0200 @@ -0,0 +1,761 @@ +/* + * Driver for the Synopsys DesignWare DMA Controller @@ -1170,19 +2040,22 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/Makefile linux-avr32.git/arc +obj-$(CONFIG_DW_DMAC) += dw-dmac.o diff -x .git -Nur linux-2.6.22.1/arch/avr32/Kconfig linux-avr32.git/arch/avr32/Kconfig --- linux-2.6.22.1/arch/avr32/Kconfig 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/arch/avr32/Kconfig 2007-07-12 13:59:49.000000000 +0200 -@@ -113,6 +113,10 @@ ++++ linux-avr32.git/arch/avr32/Kconfig 2007-07-13 11:24:16.000000000 +0200 +@@ -113,6 +113,13 @@ bool "ATNGW100 Network Gateway" endchoice +if BOARD_ATSTK1000 +source "arch/avr32/boards/atstk1000/Kconfig" +endif ++if BOARD_ATNGW100 ++source "arch/avr32/boards/atngw100/Kconfig" ++endif + choice prompt "Boot loader type" default LOADER_U_BOOT -@@ -171,6 +175,10 @@ +@@ -171,6 +178,10 @@ enabling Nexus-compliant debuggers to keep track of the PID of the currently executing task. @@ -1193,7 +2066,7 @@ diff -x .git -Nur linux-2.6.22.1/arch/avr32/Kconfig linux-avr32.git/arch/avr32/K # FPU emulation goes here source "kernel/Kconfig.hz" -@@ -185,6 +193,27 @@ +@@ -185,6 +196,27 @@ endmenu @@ -4149,20 +5022,24 @@ diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h linux-avr32.git/d +#endif /* __ASM_AVR32_TWI_H__ */ diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32.git/drivers/i2c/busses/i2c-atmeltwi.c --- linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-avr32.git/drivers/i2c/busses/i2c-atmeltwi.c 2007-07-12 13:59:59.000000000 +0200 -@@ -0,0 +1,348 @@ ++++ linux-avr32.git/drivers/i2c/busses/i2c-atmeltwi.c 2007-07-13 11:24:16.000000000 +0200 +@@ -0,0 +1,383 @@ +/* + * i2c Support for Atmel's Two-Wire Interface (TWI) + * + * Based on the work of Copyright (C) 2004 Rick Bronson + * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com> -+ * Ported to AVR32 and heavily modified by Espen Krangnes <ekrangnes at atmel.com> ++ * Ported to AVR32 and heavily modified by Espen Krangnes ++ * <ekrangnes at atmel.com> + * + * Copyright (C) 2006 Atmel Corporation + * + * Borrowed heavily from the original work by: + * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com> + * ++ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz> ++ * bugs removed, interrupt routine markedly rewritten ++ * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or @@ -4202,6 +5079,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32.g + u8 *buf; + u8 len; + u8 acks_left; ++ u8 nack; + unsigned int irq; + +}; @@ -4238,8 +5116,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32.g + * Waits for the i2c status register to set the specified bitmask + * Returns 0 if timed out (~100ms). + */ -+static short twi_wait_for_completion(struct atmel_twi *twi, -+ u32 mask) ++static short twi_complete(struct atmel_twi *twi, u32 mask) +{ + int timeout = msecs_to_jiffies(100); + @@ -4248,9 +5125,15 @@ diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32.g + + twi_writel(twi, IER, mask); + -+ if(!wait_for_completion_timeout(&twi->comp, timeout)) -+ return -ETIMEDOUT; ++ if (!wait_for_completion_timeout(&twi->comp, timeout)) { ++ /* RESET TWI interface */ ++ twi_writel(twi, CR, TWI_BIT(SWRST)); + ++ /* Reinitialize TWI */ ++ twi_hwinit(twi); ++ ++ return -ETIMEDOUT; ++ } + return 0; +} + @@ -4268,8 +5151,8 @@ diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32.g + + dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num); + ++ twi->nack = 0; + for (i = 0; i < num; i++, pmsg++) { -+ + twi->len = pmsg->len; + twi->buf = pmsg->buf; + twi->acks_left = pmsg->len; @@ -4286,26 +5169,27 @@ diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32.g + twi_writel(twi, CR, TWI_BIT(MSEN)); + + if (pmsg->flags & I2C_M_RD) { -+ twi_writel(twi, CR, TWI_BIT(START)); -+ if ( twi_wait_for_completion(twi,TWI_BIT(RXRDY))==-ETIMEDOUT ) { ++ if (twi->len == 1) ++ twi_writel(twi, CR, ++ TWI_BIT(START) | TWI_BIT(STOP)); ++ else ++ twi_writel(twi, CR, TWI_BIT(START)); ++ ++ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) { + dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n", + twi->acks_left); + return -ETIMEDOUT; + } -+ -+ /* Send Stop, and Wait until transfer is finished */ -+ if ( twi_wait_for_completion(twi,TWI_BIT(TXCOMP))==-ETIMEDOUT ) { -+ dev_dbg(&adap->dev, "TXCOMP timeout\n"); -+ return -ETIMEDOUT; -+ } -+ + } else { + twi_writel(twi, THR, twi->buf[0]); -+ if ( twi_wait_for_completion(twi,TWI_BIT(TXRDY))==-ETIMEDOUT ) { ++ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) { + dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n", + twi->acks_left); + return -ETIMEDOUT; + } ++ ++ if (twi->nack) ++ return -ENODEV; + } + + /* Disable TWI interface */ @@ -4322,38 +5206,62 @@ diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32.g + struct atmel_twi *twi = dev_id; + int status = twi_readl(twi, SR); + -+ if (twi->intmask & status){ -+ if (twi->intmask & TWI_BIT(NACK)) { ++ /* Save state for later debug prints */ ++ int old_mask = twi->intmask; ++ int old_status = status; ++ ++ if (twi->intmask & status) { ++ if (status & TWI_BIT(NACK)) + goto nack; -+ } else if (twi->intmask & TWI_BIT(RXRDY)){ -+ twi->buf[twi->len - twi->acks_left] = twi_readl(twi,RHR); -+ if(--twi->acks_left==1) ++ ++ status &= twi->intmask; ++ ++ if (status & TWI_BIT(TXCOMP)) ++ goto complete; ++ ++ else if (status & TWI_BIT(RXRDY)) { ++ if ( twi->acks_left > 0 ) { ++ twi->buf[twi->len - twi->acks_left] = ++ twi_readl(twi, RHR); ++ twi->acks_left--; ++ } ++ if ( twi->acks_left == 1 ) + twi_writel(twi, CR, TWI_BIT(STOP)); -+ if (twi->acks_left==0) -+ goto complete; -+ } else if (twi->intmask & TWI_BIT(TXRDY)) { ++ ++ if (twi->acks_left == 0 ) { ++ twi->intmask = TWI_BIT(TXCOMP); ++ twi_writel(twi, IER, TWI_BIT(TXCOMP)); ++ } ++ } else if (status & TWI_BIT(TXRDY)) { + twi->acks_left--; -+ if (twi->acks_left==0) { ++ if ( twi->acks_left == 0 ) { + twi->intmask = TWI_BIT(TXCOMP); + twi_writel(twi, IER, TWI_BIT(TXCOMP)); -+ } else ++ } else if (twi->acks_left > 0) + twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]); -+ } else if (twi->intmask & TWI_BIT(TXCOMP)) { -+ goto complete; + } + } + ++ dev_dbg(&twi->adapter.dev, ++ "TWI ISR, SR 0x%08X, intmask 0x%08X, acks_left %i.\n", ++ old_status, old_mask, twi->acks_left); ++ + return IRQ_HANDLED; + +nack: -+ printk(KERN_INFO "NACK received!\n"); ++ dev_dbg(&twi->adapter.dev, "NACK received!\n"); ++ twi->nack = 1; + +complete: + twi_writel(twi, IDR, ~0UL); + complete(&twi->comp); + -+ return IRQ_HANDLED; ++ dev_dbg(&twi->adapter.dev, ++ "TWI ISR, SR 0x%08X, intmask 0x%08X, \ ++ acks_left %i - completed.\n", ++ old_status, old_mask, twi->acks_left); + ++ return IRQ_HANDLED; +} + + @@ -4540,6 +5448,241 @@ diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/Makefile linux-avr32.git/dri ifeq ($(CONFIG_I2C_DEBUG_BUS),y) EXTRA_CFLAGS += -DDEBUG +diff -x .git -Nur linux-2.6.22.1/drivers/input/mouse/gpio_mouse.c linux-avr32.git/drivers/input/mouse/gpio_mouse.c +--- linux-2.6.22.1/drivers/input/mouse/gpio_mouse.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-avr32.git/drivers/input/mouse/gpio_mouse.c 2007-07-13 11:24:16.000000000 +0200 +@@ -0,0 +1,196 @@ ++/* ++ * Driver for simulating a mouse on GPIO lines. ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/version.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/input-polldev.h> ++#include <linux/gpio_mouse.h> ++ ++#include <asm/gpio.h> ++ ++/* ++ * Timer function which is run every scan_ms ms when the device is opened. ++ * The dev input varaible is set to the the input_dev pointer. ++ */ ++static void gpio_mouse_scan(struct input_polled_dev *dev) ++{ ++ struct gpio_mouse_platform_data *gpio = dev->private; ++ struct input_dev *input = dev->input; ++ int x, y; ++ ++ if (gpio->bleft >= 0) ++ input_report_key(input, BTN_LEFT, ++ gpio_get_value(gpio->bleft) ^ gpio->polarity); ++ if (gpio->bmiddle >= 0) ++ input_report_key(input, BTN_MIDDLE, ++ gpio_get_value(gpio->bmiddle) ^ gpio->polarity); ++ if (gpio->bright >= 0) ++ input_report_key(input, BTN_RIGHT, ++ gpio_get_value(gpio->bright) ^ gpio->polarity); ++ ++ x = (gpio_get_value(gpio->right) ^ gpio->polarity) ++ - (gpio_get_value(gpio->left) ^ gpio->polarity); ++ y = (gpio_get_value(gpio->down) ^ gpio->polarity) ++ - (gpio_get_value(gpio->up) ^ gpio->polarity); ++ ++ input_report_rel(input, REL_X, x); ++ input_report_rel(input, REL_Y, y); ++ input_sync(input); ++} ++ ++static int __init gpio_mouse_probe(struct platform_device *pdev) ++{ ++ struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data; ++ struct input_polled_dev *input_poll; ++ struct input_dev *input; ++ int pin, i; ++ int error; ++ ++ if (!pdata) { ++ dev_err(&pdev->dev, "no platform data\n"); ++ error = -ENXIO; ++ goto out; ++ } ++ ++ if (pdata->scan_ms < 0) { ++ dev_err(&pdev->dev, "invalid scan time\n"); ++ error = -EINVAL; ++ goto out; ++ } ++ ++ for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) { ++ pin = pdata->pins[i]; ++ ++ if (pin < 0) { ++ ++ if (i <= GPIO_MOUSE_PIN_RIGHT) { ++ /* Mouse direction is required. */ ++ dev_err(&pdev->dev, ++ "missing GPIO for directions\n"); ++ error = -EINVAL; ++ goto out_free_gpios; ++ } ++ ++ if (i == GPIO_MOUSE_PIN_BLEFT) ++ dev_dbg(&pdev->dev, "no left button defined\n"); ++ ++ } else { ++ error = gpio_request(pin, "gpio_mouse"); ++ if (error) { ++ dev_err(&pdev->dev, "fail %d pin (%d idx)\n", ++ pin, i); ++ goto out_free_gpios; ++ } ++ ++ gpio_direction_input(pin); ++ } ++ } ++ ++ input_poll = input_allocate_polled_device(); ++ if (!input_poll) { ++ dev_err(&pdev->dev, "not enough memory for input device\n"); ++ error = -ENOMEM; ++ goto out_free_gpios; ++ } ++ ++ platform_set_drvdata(pdev, input_poll); ++ ++ /* set input-polldev handlers */ ++ input_poll->private = pdata; ++ input_poll->poll = gpio_mouse_scan; ++ input_poll->poll_interval = pdata->scan_ms; ++ ++ input = input_poll->input; ++ input->name = pdev->name; ++ input->id.bustype = BUS_HOST; ++ input->dev.parent = &pdev->dev; ++ ++ input_set_capability(input, EV_REL, REL_X); ++ input_set_capability(input, EV_REL, REL_Y); ++ if (pdata->bleft >= 0) ++ input_set_capability(input, EV_KEY, BTN_LEFT); ++ if (pdata->bmiddle >= 0) ++ input_set_capability(input, EV_KEY, BTN_MIDDLE); ++ if (pdata->bright >= 0) ++ input_set_capability(input, EV_KEY, BTN_RIGHT); ++ ++ error = input_register_polled_device(input_poll); ++ if (error) { ++ dev_err(&pdev->dev, "could not register input device\n"); ++ goto out_free_polldev; ++ } ++ ++ dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n", ++ pdata->scan_ms, ++ pdata->bleft < 0 ? "" : "left ", ++ pdata->bmiddle < 0 ? "" : "middle ", ++ pdata->bright < 0 ? "" : "right"); ++ ++ return 0; ++ ++ out_free_polldev: ++ input_free_polled_device(input_poll); ++ platform_set_drvdata(pdev, NULL); ++ ++ out_free_gpios: ++ while (--i >= 0) { ++ pin = pdata->pins[i]; ++ if (pin) ++ gpio_free(pin); ++ } ++ out: ++ return error; ++} ++ ++static int __devexit gpio_mouse_remove(struct platform_device *pdev) ++{ ++ struct input_polled_dev *input = platform_get_drvdata(pdev); ++ struct gpio_mouse_platform_data *pdata = input->private; ++ int pin, i; ++ ++ input_unregister_polled_device(input); ++ input_free_polled_device(input); ++ ++ for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) { ++ pin = pdata->pins[i]; ++ if (pin >= 0) ++ gpio_free(pin); ++ } ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++struct platform_driver gpio_mouse_device_driver = { ++ .remove = __devexit_p(gpio_mouse_remove), ++ .driver = { ++ .name = "gpio_mouse", ++ } ++}; ++ ++static int __init gpio_mouse_init(void) ++{ ++ return platform_driver_probe(&gpio_mouse_device_driver, ++ gpio_mouse_probe); ++} ++module_init(gpio_mouse_init); ++ ++static void __exit gpio_mouse_exit(void) ++{ ++ platform_driver_unregister(&gpio_mouse_device_driver); ++} ++module_exit(gpio_mouse_exit); ++ ++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); ++MODULE_DESCRIPTION("GPIO mouse driver"); ++MODULE_LICENSE("GPL"); +diff -x .git -Nur linux-2.6.22.1/drivers/input/mouse/Kconfig linux-avr32.git/drivers/input/mouse/Kconfig +--- linux-2.6.22.1/drivers/input/mouse/Kconfig 2007-07-10 20:56:30.000000000 +0200 ++++ linux-avr32.git/drivers/input/mouse/Kconfig 2007-07-13 11:24:16.000000000 +0200 +@@ -216,4 +216,20 @@ + help + Say Y here to support HIL pointers. + ++config MOUSE_GPIO ++ tristate "GPIO mouse" ++ depends on GENERIC_GPIO ++ select INPUT_POLLDEV ++ help ++ This driver simulates a mouse on GPIO lines of various CPUs (and some ++ other chips). ++ ++ Say Y here if your device has buttons or a simple joystick connected ++ directly to GPIO lines. Your board-specific setup logic must also ++ provide a platform device and platform data saying which GPIOs are ++ used. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called gpio_mouse. ++ + endif +diff -x .git -Nur linux-2.6.22.1/drivers/input/mouse/Makefile linux-avr32.git/drivers/input/mouse/Makefile +--- linux-2.6.22.1/drivers/input/mouse/Makefile 2007-07-10 20:56:30.000000000 +0200 ++++ linux-avr32.git/drivers/input/mouse/Makefile 2007-07-13 11:24:16.000000000 +0200 +@@ -15,6 +15,7 @@ + obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o + obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o + obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o ++obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o + + psmouse-objs := psmouse-base.o synaptics.o + diff -x .git -Nur linux-2.6.22.1/drivers/leds/Kconfig linux-avr32.git/drivers/leds/Kconfig --- linux-2.6.22.1/drivers/leds/Kconfig 2007-07-10 20:56:30.000000000 +0200 +++ linux-avr32.git/drivers/leds/Kconfig 2007-07-12 14:00:02.000000000 +0200 @@ -6330,7 +7473,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/Kconfig linux-avr32.git/drivers/net parts. Say Y to include support for the MACB chip. diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/macb.c --- linux-2.6.22.1/drivers/net/macb.c 2007-07-10 20:56:30.000000000 +0200 -+++ linux-avr32.git/drivers/net/macb.c 2007-07-12 14:00:04.000000000 +0200 ++++ linux-avr32.git/drivers/net/macb.c 2007-07-13 11:24:16.000000000 +0200 @@ -17,13 +17,14 @@ #include <linux/init.h> #include <linux/netdevice.h> @@ -6367,7 +7510,8 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ -} - -static void macb_disable_mdio(struct macb *bp) --{ ++static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum) + { - unsigned long flags; - u32 reg; - @@ -6380,8 +7524,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ -} - -static int macb_mdio_read(struct net_device *dev, int phy_id, int location) -+static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum) - { +-{ - struct macb *bp = netdev_priv(dev); + struct macb *bp = bus->priv; int value; @@ -6432,39 +7575,39 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ | MACB_BF(CODE, MACB_MAN_CODE) - | MACB_BF(DATA, val))); + | MACB_BF(DATA, value))); -+ + +- wait_for_completion(&bp->mdio_complete); + /* wait for end of transfer */ + while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR))) + cpu_relax(); -- wait_for_completion(&bp->mdio_complete); -+ return 0; -+} - - macb_disable_mdio(bp); - mutex_unlock(&bp->mdio_mutex); -+static int macb_mdio_reset(struct mii_bus *bus) -+{ + return 0; } -static int macb_phy_probe(struct macb *bp) -+static void macb_handle_link_change(struct net_device *dev) ++static int macb_mdio_reset(struct mii_bus *bus) { - int phy_address; - u16 phyid1, phyid2; -+ struct macb *bp = netdev_priv(dev); -+ struct phy_device *phydev = bp->phy_dev; -+ unsigned long flags; ++ return 0; ++} - for (phy_address = 0; phy_address < 32; phy_address++) { - phyid1 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID1); - phyid2 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID2); -+ int status_change = 0; ++static void macb_handle_link_change(struct net_device *dev) ++{ ++ struct macb *bp = netdev_priv(dev); ++ struct phy_device *phydev = bp->phy_dev; ++ unsigned long flags; - if (phyid1 != 0xffff && phyid1 != 0x0000 - && phyid2 != 0xffff && phyid2 != 0x0000) - break; ++ int status_change = 0; ++ + spin_lock_irqsave(&bp->lock, flags); + + if (phydev->link) { @@ -6717,15 +7860,82 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ /* Enable interrupts */ macb_writel(bp, IER, (MACB_BIT(RCOMP) -@@ -776,18 +795,7 @@ +@@ -776,18 +795,126 @@ | MACB_BIT(TCOMP) | MACB_BIT(ISR_ROVR) | MACB_BIT(HRESP))); --} -- ++ ++} ++ ++/* ++ * The hash address register is 64 bits long and takes up two ++ * locations in the memory map. The least significant bits are stored ++ * in EMAC_HSL and the most significant bits in EMAC_HSH. ++ * ++ * The unicast hash enable and the multicast hash enable bits in the ++ * network configuration register enable the reception of hash matched ++ * frames. The destination address is reduced to a 6 bit index into ++ * the 64 bit hash register using the following hash function. The ++ * hash function is an exclusive or of every sixth bit of the ++ * destination address. ++ * ++ * hi[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47] ++ * hi[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46] ++ * hi[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45] ++ * hi[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44] ++ * hi[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43] ++ * hi[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42] ++ * ++ * da[0] represents the least significant bit of the first byte ++ * received, that is, the multicast/unicast indicator, and da[47] ++ * represents the most significant bit of the last byte received. If ++ * the hash index, hi[n], points to a bit that is set in the hash ++ * register then the frame will be matched according to whether the ++ * frame is multicast or unicast. A multicast match will be signalled ++ * if the multicast hash enable bit is set, da[0] is 1 and the hash ++ * index points to a bit set in the hash register. A unicast match ++ * will be signalled if the unicast hash enable bit is set, da[0] is 0 ++ * and the hash index points to a bit set in the hash register. To ++ * receive all multicast frames, the hash register should be set with ++ * all ones and the multicast hash enable bit should be set in the ++ * network configuration register. ++ */ ++ ++static inline int hash_bit_value(int bitnr, __u8 *addr) ++{ ++ if (addr[bitnr / 8] & (1 << (bitnr % 8))) ++ return 1; ++ return 0; ++} ++ ++/* ++ * Return the hash index value for the specified address. ++ */ ++static int hash_get_index(__u8 *addr) ++{ ++ int i, j, bitval; ++ int hash_index = 0; ++ ++ for (j = 0; j < 6; j++) { ++ for (i = 0, bitval = 0; i < 8; i++) ++ bitval ^= hash_bit_value(i*6 + j, addr); ++ ++ hash_index |= (bitval << j); ++ } ++ ++ return hash_index; + } + -static void macb_init_phy(struct net_device *dev) --{ -- struct macb *bp = netdev_priv(dev); ++/* ++ * Add multicast addresses to the internal multicast-hash table. ++ */ ++static void macb_sethashtable(struct net_device *dev) + { ++ struct dev_mc_list *curr; ++ unsigned long mc_filter[2]; ++ unsigned int i, bitnr; + struct macb *bp = netdev_priv(dev); - /* Set some reasonable default settings */ - macb_mdio_write(dev, bp->mii.phy_id, MII_ADVERTISE, @@ -6733,10 +7943,58 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ - macb_mdio_write(dev, bp->mii.phy_id, MII_BMCR, - (BMCR_SPEED100 | BMCR_ANENABLE - | BMCR_ANRESTART | BMCR_FULLDPLX)); ++ mc_filter[0] = mc_filter[1] = 0; ++ ++ curr = dev->mc_list; ++ for (i = 0; i < dev->mc_count; i++, curr = curr->next) { ++ if (!curr) break; /* unexpected end of list */ ++ ++ bitnr = hash_get_index(curr->dmi_addr); ++ mc_filter[bitnr >> 5] |= 1 << (bitnr & 31); ++ } ++ ++ macb_writel(bp, HRB, mc_filter[0]); ++ macb_writel(bp, HRT, mc_filter[1]); ++} ++ ++/* ++ * Enable/Disable promiscuous and multicast modes. ++ */ ++static void macb_set_rx_mode(struct net_device *dev) ++{ ++ unsigned long cfg; ++ struct macb *bp = netdev_priv(dev); ++ ++ cfg = macb_readl(bp, NCFGR); ++ ++ if (dev->flags & IFF_PROMISC) ++ /* Enable promiscuous mode */ ++ cfg |= MACB_BIT(CAF); ++ else if (dev->flags & (~IFF_PROMISC)) ++ /* Disable promiscuous mode */ ++ cfg &= ~MACB_BIT(CAF); ++ ++ if (dev->flags & IFF_ALLMULTI) { ++ /* Enable all multicast mode */ ++ macb_writel(bp, HRB, -1); ++ macb_writel(bp, HRT, -1); ++ cfg |= MACB_BIT(NCFGR_MTI); ++ } else if (dev->mc_count > 0) { ++ /* Enable specific multicasts */ ++ macb_sethashtable(dev); ++ cfg |= MACB_BIT(NCFGR_MTI); ++ } else if (dev->flags & (~IFF_ALLMULTI)) { ++ /* Disable all multicast mode */ ++ macb_writel(bp, HRB, 0); ++ macb_writel(bp, HRT, 0); ++ cfg &= ~MACB_BIT(NCFGR_MTI); ++ } ++ ++ macb_writel(bp, NCFGR, cfg); } static int macb_open(struct net_device *dev) -@@ -797,6 +805,10 @@ +@@ -797,6 +924,10 @@ dev_dbg(&bp->pdev->dev, "open\n"); @@ -6747,7 +8005,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ if (!is_valid_ether_addr(dev->dev_addr)) return -EADDRNOTAVAIL; -@@ -810,12 +822,11 @@ +@@ -810,12 +941,11 @@ macb_init_rings(bp); macb_init_hw(bp); @@ -6763,7 +8021,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ return 0; } -@@ -825,10 +836,11 @@ +@@ -825,10 +955,11 @@ struct macb *bp = netdev_priv(dev); unsigned long flags; @@ -6777,7 +8035,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ spin_lock_irqsave(&bp->lock, flags); macb_reset_hw(bp); netif_carrier_off(dev); -@@ -845,6 +857,9 @@ +@@ -845,6 +976,9 @@ struct net_device_stats *nstat = &bp->stats; struct macb_stats *hwstat = &bp->hw_stats; @@ -6787,16 +8045,16 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ /* Convert HW stats into netdevice stats */ nstat->rx_errors = (hwstat->rx_fcs_errors + hwstat->rx_align_errors + -@@ -882,18 +897,27 @@ +@@ -882,18 +1016,27 @@ static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct macb *bp = netdev_priv(dev); + struct phy_device *phydev = bp->phy_dev; - -- return mii_ethtool_gset(&bp->mii, cmd); ++ + if (!phydev) + return -ENODEV; -+ + +- return mii_ethtool_gset(&bp->mii, cmd); + return phy_ethtool_gset(phydev, cmd); } @@ -6818,7 +8076,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ { struct macb *bp = netdev_priv(dev); -@@ -902,104 +926,34 @@ +@@ -902,104 +1045,34 @@ strcpy(info->bus_info, bp->pdev->dev.bus_id); } @@ -6928,7 +8186,15 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ unsigned long pclk_hz; u32 config; int err = -ENXIO; -@@ -1080,10 +1034,6 @@ +@@ -1073,6 +1146,7 @@ + dev->stop = macb_close; + dev->hard_start_xmit = macb_start_xmit; + dev->get_stats = macb_get_stats; ++ dev->set_multicast_list = macb_set_rx_mode; + dev->do_ioctl = macb_ioctl; + dev->poll = macb_poll; + dev->weight = 64; +@@ -1080,10 +1154,6 @@ dev->base_addr = regs->start; @@ -6939,7 +8205,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ /* Set MII management clock divider */ pclk_hz = clk_get_rate(bp->pclk); if (pclk_hz <= 20000000) -@@ -1096,20 +1046,9 @@ +@@ -1096,20 +1166,9 @@ config = MACB_BF(CLK, MACB_CLK_DIV64); macb_writel(bp, NCFGR, config); @@ -6961,7 +8227,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ if (pdata && pdata->is_rmii) #if defined(CONFIG_ARCH_AT91) macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) ); -@@ -1131,9 +1070,11 @@ +@@ -1131,9 +1190,11 @@ goto err_out_free_irq; } @@ -6975,7 +8241,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d " "(%02x:%02x:%02x:%02x:%02x:%02x)\n", -@@ -1141,8 +1082,15 @@ +@@ -1141,8 +1202,15 @@ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); @@ -6991,7 +8257,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ err_out_free_irq: free_irq(dev->irq, dev); err_out_iounmap: -@@ -1153,7 +1101,9 @@ +@@ -1153,7 +1221,9 @@ clk_put(bp->hclk); #endif clk_disable(bp->pclk); @@ -7001,7 +8267,7 @@ diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/ clk_put(bp->pclk); err_out_free_dev: free_netdev(dev); -@@ -1171,7 +1121,8 @@ +@@ -1171,7 +1241,8 @@ if (dev) { bp = netdev_priv(dev); @@ -11060,6 +12326,71 @@ diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/unaligned.h linux-avr32.git/i +#include <asm-generic/unaligned.h> #endif /* __ASM_AVR32_UNALIGNED_H */ +diff -x .git -Nur linux-2.6.22.1/include/linux/gpio_mouse.h linux-avr32.git/include/linux/gpio_mouse.h +--- linux-2.6.22.1/include/linux/gpio_mouse.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-avr32.git/include/linux/gpio_mouse.h 2007-07-13 11:24:16.000000000 +0200 +@@ -0,0 +1,61 @@ ++/* ++ * Driver for simulating a mouse on GPIO lines. ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _GPIO_MOUSE_H ++#define _GPIO_MOUSE_H ++ ++#define GPIO_MOUSE_POLARITY_ACT_HIGH 0x00 ++#define GPIO_MOUSE_POLARITY_ACT_LOW 0x01 ++ ++#define GPIO_MOUSE_PIN_UP 0 ++#define GPIO_MOUSE_PIN_DOWN 1 ++#define GPIO_MOUSE_PIN_LEFT 2 ++#define GPIO_MOUSE_PIN_RIGHT 3 ++#define GPIO_MOUSE_PIN_BLEFT 4 ++#define GPIO_MOUSE_PIN_BMIDDLE 5 ++#define GPIO_MOUSE_PIN_BRIGHT 6 ++#define GPIO_MOUSE_PIN_MAX 7 ++ ++/** ++ * struct gpio_mouse_platform_data ++ * @scan_ms: integer in ms specifying the scan periode. ++ * @polarity: Pin polarity, active high or low. ++ * @up: GPIO line for up value. ++ * @down: GPIO line for down value. ++ * @left: GPIO line for left value. ++ * @right: GPIO line for right value. ++ * @bleft: GPIO line for left button. ++ * @bmiddle: GPIO line for middle button. ++ * @bright: GPIO line for right button. ++ * ++ * This struct must be added to the platform_device in the board code. ++ * It is used by the gpio_mouse driver to setup GPIO lines and to ++ * calculate mouse movement. ++ */ ++struct gpio_mouse_platform_data { ++ int scan_ms; ++ int polarity; ++ ++ union { ++ struct { ++ int up; ++ int down; ++ int left; ++ int right; ++ ++ int bleft; ++ int bmiddle; ++ int bright; ++ }; ++ int pins[GPIO_MOUSE_PIN_MAX]; ++ }; ++}; ++ ++#endif /* _GPIO_MOUSE_H */ diff -x .git -Nur linux-2.6.22.1/include/linux/leds.h linux-avr32.git/include/linux/leds.h --- linux-2.6.22.1/include/linux/leds.h 2007-07-10 20:56:30.000000000 +0200 +++ linux-avr32.git/include/linux/leds.h 2007-07-12 14:00:30.000000000 +0200 |