aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/avr32
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/avr32')
-rw-r--r--target/linux/avr32/Makefile2
-rw-r--r--target/linux/avr32/config-default4
-rw-r--r--target/linux/avr32/patches/100-git_sync.patch16677
3 files changed, 4 insertions, 16679 deletions
diff --git a/target/linux/avr32/Makefile b/target/linux/avr32/Makefile
index e07cb9aaa6..67524d95f1 100644
--- a/target/linux/avr32/Makefile
+++ b/target/linux/avr32/Makefile
@@ -10,7 +10,7 @@ ARCH:=avr32
BOARD:=avr32
BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
-LINUX_VERSION:=2.6.25.20
+LINUX_VERSION:=2.6.27.7
include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/avr32/config-default b/target/linux/avr32/config-default
index 8a0692a60e..60a901a3e9 100644
--- a/target/linux/avr32/config-default
+++ b/target/linux/avr32/config-default
@@ -41,6 +41,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GPIO_DEV is not set
+# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
@@ -139,6 +140,7 @@ CONFIG_QUICKLIST=y
# CONFIG_REALTEK_PHY is not set
CONFIG_RTC_CLASS=m
CONFIG_RTC_DRV_AT32AP700X=m
+# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1553 is not set
@@ -148,6 +150,7 @@ CONFIG_RTC_DRV_AT32AP700X=m
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
@@ -185,7 +188,6 @@ CONFIG_SPI_MASTER=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_THERMAL is not set
CONFIG_TICK_ONESHOT=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_HCD is not set
diff --git a/target/linux/avr32/patches/100-git_sync.patch b/target/linux/avr32/patches/100-git_sync.patch
deleted file mode 100644
index 6c9fe1eb66..0000000000
--- a/target/linux/avr32/patches/100-git_sync.patch
+++ /dev/null
@@ -1,16677 +0,0 @@
---- a/Documentation/serial/driver
-+++ b/Documentation/serial/driver
-@@ -186,6 +186,17 @@ hardware.
- Locking: port_sem taken.
- Interrupts: caller dependent.
-
-+ flush_buffer(port)
-+ Flush any write buffers, reset any DMA state and stop any
-+ ongoing DMA transfers.
-+
-+ This will be called whenever the port->info->xmit circular
-+ buffer is cleared.
-+
-+ Locking: port->lock taken.
-+ Interrupts: locally disabled.
-+ This call must not sleep
-+
- set_termios(port,termios,oldtermios)
- Change the port parameters, including word length, parity, stop
- bits. Update read_status_mask and ignore_status_mask to indicate
---- a/arch/avr32/Kconfig
-+++ b/arch/avr32/Kconfig
-@@ -47,6 +47,9 @@ config RWSEM_GENERIC_SPINLOCK
- config GENERIC_TIME
- def_bool y
-
-+config GENERIC_CLOCKEVENTS
-+ def_bool y
-+
- config RWSEM_XCHGADD_ALGORITHM
- def_bool n
-
-@@ -70,6 +73,8 @@ source "init/Kconfig"
-
- menu "System Type and features"
-
-+source "kernel/time/Kconfig"
-+
- config SUBARCH_AVR32B
- bool
- config MMU
-@@ -83,6 +88,7 @@ config PLATFORM_AT32AP
- select MMU
- select PERFORMANCE_COUNTERS
- select HAVE_GPIO_LIB
-+ select GENERIC_ALLOCATOR
-
- #
- # CPU types
-@@ -117,6 +123,9 @@ endchoice
- if BOARD_ATSTK1000
- source "arch/avr32/boards/atstk1000/Kconfig"
- endif
-+if BOARD_ATNGW100
-+source "arch/avr32/boards/atngw100/Kconfig"
-+endif
-
- choice
- prompt "Boot loader type"
-@@ -142,6 +151,9 @@ config PHYS_OFFSET
-
- source "kernel/Kconfig.preempt"
-
-+config QUICKLIST
-+ def_bool y
-+
- config HAVE_ARCH_BOOTMEM_NODE
- def_bool n
-
-@@ -180,6 +192,10 @@ config NMI_DEBUGGING
- be dumped to the console when a Non-Maskable Interrupt
- happens.
-
-+config DW_DMAC
-+ tristate "Synopsys DesignWare DMA Controller support"
-+ default y if CPU_AT32AP7000
-+
- # FPU emulation goes here
-
- source "kernel/Kconfig.hz"
-@@ -196,6 +212,11 @@ endmenu
-
- menu "Power management options"
-
-+config ARCH_SUSPEND_POSSIBLE
-+ def_bool y
-+
-+source "kernel/power/Kconfig"
-+
- menu "CPU Frequency scaling"
-
- source "drivers/cpufreq/Kconfig"
---- a/arch/avr32/Makefile
-+++ b/arch/avr32/Makefile
-@@ -32,6 +32,7 @@ core-$(CONFIG_LOADER_U_BOOT) += arch/av
- core-y += arch/avr32/kernel/
- core-y += arch/avr32/mm/
- drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
-+drivers-y += arch/avr32/drivers/
- libs-y += arch/avr32/lib/
-
- archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/Kconfig
-@@ -0,0 +1,12 @@
-+# NGW100 customization
-+
-+config BOARD_ATNGW100_I2C_GPIO
-+ bool "Use GPIO for i2c instead of built-in TWI module"
-+ help
-+ The driver for the built-in TWI module has been plagued by
-+ various problems, while the i2c-gpio driver is based on the
-+ trusty old i2c-algo-bit bitbanging engine, making it work
-+ on pretty much any setup.
-+
-+ Choose 'Y' here if you're having i2c-related problems and
-+ want to rule out the i2c bus driver.
---- a/arch/avr32/boards/atngw100/setup.c
-+++ b/arch/avr32/boards/atngw100/setup.c
-@@ -25,6 +25,13 @@
- #include <asm/arch/init.h>
- #include <asm/arch/portmux.h>
-
-+/* Oscillator frequencies. These are board-specific */
-+unsigned long at32_board_osc_rates[3] = {
-+ [0] = 32768, /* 32.768 kHz on RTC osc */
-+ [1] = 20000000, /* 20 MHz on osc0 */
-+ [2] = 12000000, /* 12 MHz on osc1 */
-+};
-+
- /* Initialized by bootloader-specific startup code. */
- struct tag *bootloader_tags __initdata;
-
-@@ -37,11 +44,16 @@ static struct eth_platform_data __initda
- static struct spi_board_info spi0_board_info[] __initdata = {
- {
- .modalias = "mtd_dataflash",
-- .max_speed_hz = 10000000,
-+ .max_speed_hz = 8000000,
- .chip_select = 0,
- },
- };
-
-+static struct mci_platform_data __initdata mci0_data = {
-+ .detect_pin = GPIO_PIN_PC(25),
-+ .wp_pin = GPIO_PIN_PE(0),
-+};
-+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -124,6 +136,7 @@ static struct platform_device ngw_gpio_l
- }
- };
-
-+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
- static struct i2c_gpio_platform_data i2c_gpio_data = {
- .sda_pin = GPIO_PIN_PA(6),
- .scl_pin = GPIO_PIN_PA(7),
-@@ -139,6 +152,7 @@ static struct platform_device i2c_gpio_d
- .platform_data = &i2c_gpio_data,
- },
- };
-+#endif
-
- static int __init atngw100_init(void)
- {
-@@ -157,6 +171,7 @@ static int __init atngw100_init(void)
- set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
-
- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+ at32_add_device_mci(0, &mci0_data);
- at32_add_device_usba(0, NULL);
-
- for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
-@@ -165,11 +180,15 @@ static int __init atngw100_init(void)
- }
- platform_device_register(&ngw_gpio_leds);
-
-+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
- at32_select_gpio(i2c_gpio_data.sda_pin,
- AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
- at32_select_gpio(i2c_gpio_data.scl_pin,
- AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
- platform_device_register(&i2c_gpio_device);
-+#else
-+ at32_add_device_twi(0, NULL, 0);
-+#endif
-
- return 0;
- }
---- a/arch/avr32/boards/atstk1000/Kconfig
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
- bool "ATSTK1004"
- select CPU_AT32AP7002
-
-+config BOARD_ATSTK1006
-+ bool "ATSTK1006"
-+ select CPU_AT32AP7000
-+
- endchoice
-
-
-@@ -102,4 +106,60 @@ config BOARD_ATSTK1000_EXTDAC
- depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
- default y
-
-+config BOARD_ATSTK100X_ENABLE_AC97
-+ bool "Use AC97C instead of ABDAC"
-+ help
-+ Select this if you want to use the built-in AC97 controller
-+ instead of the built-in Audio Bitstream DAC. These share
-+ the same I/O pins on the AP7000, so both can't be enabled
-+ at the same time.
-+
-+ Note that the STK1000 kit doesn't ship with an AC97 codec on
-+ board, so say N unless you've got an expansion board with an
-+ AC97 codec on it that you want to use.
-+
-+config BOARD_ATSTK1000_CF_HACKS
-+ bool "ATSTK1000 CompactFlash hacks"
-+ depends on !BOARD_ATSTK100X_SW4_CUSTOM
-+ help
-+ Select this if you have re-routed the CompactFlash RESET and
-+ CD signals to GPIOs on your STK1000. This is necessary for
-+ reset and card detection to work properly, although some CF
-+ cards may be able to cope without reset.
-+
-+config BOARD_ATSTK1000_CF_RESET_PIN
-+ hex "CompactFlash RESET pin"
-+ default 0x30
-+ depends on BOARD_ATSTK1000_CF_HACKS
-+ help
-+ Select which GPIO pin to use for the CompactFlash RESET
-+ signal. This is specified as a hexadecimal number and should
-+ be defined as 0x20 * gpio_port + pin.
-+
-+ The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
-+
-+config BOARD_ATSTK1000_CF_DETECT_PIN
-+ hex "CompactFlash DETECT pin"
-+ default 0x3e
-+ depends on BOARD_ATSTK1000_CF_HACKS
-+ help
-+ Select which GPIO pin to use for the CompactFlash CD
-+ signal. This is specified as a hexadecimal number and should
-+ be defined as 0x20 * gpio_port + pin.
-+
-+ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
-+
-+config BOARD_ATSTK100X_ENABLE_PSIF
-+ bool "Enable PSIF peripheral (PS/2 support)"
-+ default n
-+ help
-+ Select this if you want to use the PSIF peripheral to hook up PS/2
-+ devices to your STK1000. This will require a hardware modification to
-+ work correctly, since PS/2 devices require 5 volt power and signals,
-+ while the STK1000 only provides 3.3 volt.
-+
-+ Say N if you have not modified the hardware to boost the voltage, say
-+ Y if you have level convertion hardware or a PS/2 device capable of
-+ operating on 3.3 volt.
-+
- endif # stk 1000
---- a/arch/avr32/boards/atstk1000/Makefile
-+++ b/arch/avr32/boards/atstk1000/Makefile
-@@ -2,3 +2,4 @@ obj-y += setup.o flash.o
- obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
- obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
- obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
-+obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -1,7 +1,7 @@
- /*
-- * ATSTK1002 daughterboard-specific init code
-+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
- *
-- * Copyright (C) 2005-2006 Atmel Corporation
-+ * Copyright (C) 2005-2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
-@@ -28,6 +28,80 @@
-
- #include "atstk1000.h"
-
-+/* Oscillator frequencies. These are board specific */
-+unsigned long at32_board_osc_rates[3] = {
-+ [0] = 32768, /* 32.768 kHz on RTC osc */
-+ [1] = 20000000, /* 20 MHz on osc0 */
-+ [2] = 12000000, /* 12 MHz on osc1 */
-+};
-+
-+/*
-+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
-+ * have the AT32AP7000 chip on board; the difference is that the
-+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
-+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
-+ * none.)
-+ *
-+ * The RAM difference is handled by the boot loader, so the only
-+ * difference we end up handling here is the NAND flash.
-+ */
-+#ifdef CONFIG_BOARD_ATSTK1006
-+#include <linux/mtd/partitions.h>
-+#include <asm/arch/smc.h>
-+
-+static struct smc_timing nand_timing __initdata = {
-+ .ncs_read_setup = 0,
-+ .nrd_setup = 10,
-+ .ncs_write_setup = 0,
-+ .nwe_setup = 10,
-+
-+ .ncs_read_pulse = 30,
-+ .nrd_pulse = 15,
-+ .ncs_write_pulse = 30,
-+ .nwe_pulse = 15,
-+
-+ .read_cycle = 30,
-+ .write_cycle = 30,
-+
-+ .ncs_read_recover = 0,
-+ .nrd_recover = 15,
-+ .ncs_write_recover = 0,
-+ /* WE# high -> RE# low min 60 ns */
-+ .nwe_recover = 50,
-+};
-+
-+static struct smc_config nand_config __initdata = {
-+ .bus_width = 1,
-+ .nrd_controlled = 1,
-+ .nwe_controlled = 1,
-+ .nwait_mode = 0,
-+ .byte_write = 0,
-+ .tdf_cycles = 2,
-+ .tdf_mode = 0,
-+};
-+
-+static struct mtd_partition nand_partitions[] = {
-+ {
-+ .name = "main",
-+ .offset = 0x00000000,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(nand_partitions);
-+ return nand_partitions;
-+}
-+
-+static struct atmel_nand_data atstk1006_nand_data __initdata = {
-+ .cle = 21,
-+ .ale = 22,
-+ .rdy_pin = GPIO_PIN_PB(30),
-+ .enable_pin = GPIO_PIN_PB(29),
-+ .partition_info = nand_part_info,
-+};
-+#endif
-
- struct eth_addr {
- u8 addr[6];
-@@ -83,6 +157,19 @@ static struct spi_board_info spi1_board_
- } };
- #endif
-
-+static struct cf_platform_data __initdata cf0_data = {
-+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
-+ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
-+ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
-+#else
-+ .detect_pin = GPIO_PIN_NONE,
-+ .reset_pin = GPIO_PIN_NONE,
-+#endif
-+ .vcc_pin = GPIO_PIN_NONE,
-+ .ready_pin = GPIO_PIN_PB(27),
-+ .cs = 4,
-+};
-+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -212,6 +299,12 @@ static int __init atstk1002_init(void)
-
- at32_add_system_devices();
-
-+#ifdef CONFIG_BOARD_ATSTK1006
-+ smc_set_timing(&nand_config, &nand_timing);
-+ smc_set_configuration(3, &nand_config);
-+ at32_add_device_nand(0, &atstk1006_nand_data);
-+#endif
-+
- #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_usart(1);
- #else
-@@ -228,16 +321,30 @@ static int __init atstk1002_init(void)
- #ifdef CONFIG_BOARD_ATSTK100X_SPI1
- at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
-+ at32_add_device_twi(0, NULL, 0);
-+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+ at32_add_device_mci(0, NULL);
-+#endif
- #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
- set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
- #else
- at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-- fbmem_start, fbmem_size);
-+ fbmem_start, fbmem_size, 0);
- #endif
- at32_add_device_usba(0, NULL);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+ at32_add_device_ac97c(0, NULL);
-+#else
-+ at32_add_device_abdac(0);
-+#endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
- at32_add_device_ssc(0, ATMEL_SSC_TX);
- #endif
-+ at32_add_device_cf(0, 2, &cf0_data);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
-+ at32_add_device_psif(0);
-+ at32_add_device_psif(1);
-+#endif
-
- atstk1000_setup_j2_leds();
- atstk1002_setup_extdac();
---- a/arch/avr32/boards/atstk1000/atstk1003.c
-+++ b/arch/avr32/boards/atstk1000/atstk1003.c
-@@ -27,6 +27,13 @@
-
- #include "atstk1000.h"
-
-+/* Oscillator frequencies. These are board specific */
-+unsigned long at32_board_osc_rates[3] = {
-+ [0] = 32768, /* 32.768 kHz on RTC osc */
-+ [1] = 20000000, /* 20 MHz on osc0 */
-+ [2] = 12000000, /* 12 MHz on osc1 */
-+};
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static struct at73c213_board_info at73c213_data = {
- .ssc_id = 0,
-@@ -59,6 +66,19 @@ static struct spi_board_info spi1_board_
- } };
- #endif
-
-+static struct cf_platform_data __initdata cf0_data = {
-+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
-+ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
-+ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
-+#else
-+ .detect_pin = GPIO_PIN_NONE,
-+ .reset_pin = GPIO_PIN_NONE,
-+#endif
-+ .vcc_pin = GPIO_PIN_NONE,
-+ .ready_pin = GPIO_PIN_PB(27),
-+ .cs = 4,
-+};
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static void __init atstk1003_setup_extdac(void)
- {
-@@ -147,12 +167,22 @@ static int __init atstk1003_init(void)
- at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-- at32_add_device_mci(0);
-+ at32_add_device_mci(0, NULL);
- #endif
- at32_add_device_usba(0, NULL);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+ at32_add_device_ac97c(0, NULL);
-+#else
-+ at32_add_device_abdac(0);
-+#endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
- at32_add_device_ssc(0, ATMEL_SSC_TX);
- #endif
-+ at32_add_device_cf(0, 2, &cf0_data);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
-+ at32_add_device_psif(0);
-+ at32_add_device_psif(1);
-+#endif
-
- atstk1000_setup_j2_leds();
- atstk1003_setup_extdac();
---- a/arch/avr32/boards/atstk1000/atstk1004.c
-+++ b/arch/avr32/boards/atstk1000/atstk1004.c
-@@ -29,6 +29,13 @@
-
- #include "atstk1000.h"
-
-+/* Oscillator frequencies. These are board specific */
-+unsigned long at32_board_osc_rates[3] = {
-+ [0] = 32768, /* 32.768 kHz on RTC osc */
-+ [1] = 20000000, /* 20 MHz on osc0 */
-+ [2] = 12000000, /* 12 MHz on osc1 */
-+};
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static struct at73c213_board_info at73c213_data = {
- .ssc_id = 0,
-@@ -130,14 +137,23 @@ static int __init atstk1004_init(void)
- at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-- at32_add_device_mci(0);
-+ at32_add_device_mci(0, NULL);
- #endif
- at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-- fbmem_start, fbmem_size);
-+ fbmem_start, fbmem_size, 0);
- at32_add_device_usba(0, NULL);
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+ at32_add_device_ac97c(0, NULL);
-+#else
-+ at32_add_device_abdac(0);
-+#endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
- at32_add_device_ssc(0, ATMEL_SSC_TX);
- #endif
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
-+ at32_add_device_psif(0);
-+ at32_add_device_psif(1);
-+#endif
-
- atstk1000_setup_j2_leds();
- atstk1004_setup_extdac();
---- a/arch/avr32/configs/atngw100_defconfig
-+++ b/arch/avr32/configs/atngw100_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.24-rc7
--# Wed Jan 9 23:20:41 2008
-+# Linux kernel version: 2.6.25.4
-+# Wed Jun 11 15:23:36 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
- # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
- # CONFIG_ARCH_HAS_ILOG2_U32 is not set
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
--CONFIG_ARCH_SUPPORTS_OPROFILE=y
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
- CONFIG_GENERIC_BUG=y
-@@ -37,17 +37,15 @@ CONFIG_POSIX_MQUEUE=y
- CONFIG_BSD_PROCESS_ACCT=y
- CONFIG_BSD_PROCESS_ACCT_V3=y
- # CONFIG_TASKSTATS is not set
--# CONFIG_USER_NS is not set
--# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
--CONFIG_FAIR_GROUP_SCHED=y
--CONFIG_FAIR_USER_SCHED=y
--# CONFIG_FAIR_CGROUP_SCHED is not set
-+# CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
- # CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
- CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-@@ -61,11 +59,13 @@ CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
- CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
- # CONFIG_BASE_FULL is not set
- CONFIG_FUTEX=y
- CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
- CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
-@@ -73,6 +73,14 @@ CONFIG_SLUB_DEBUG=y
- # CONFIG_SLAB is not set
- CONFIG_SLUB=y
- # CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
-@@ -101,10 +109,15 @@ CONFIG_IOSCHED_CFQ=y
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-
- #
- # System Type and features
- #
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-@@ -113,6 +126,7 @@ CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7000=y
- # CONFIG_BOARD_ATSTK1000 is not set
- CONFIG_BOARD_ATNGW100=y
-+CONFIG_BOARD_ATNGW100_I2C_GPIO=y
- CONFIG_LOADER_U_BOOT=y
-
- #
-@@ -121,6 +135,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP700X_32_BIT_SMC is not set
- CONFIG_AP700X_16_BIT_SMC=y
- # CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -146,16 +161,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- CONFIG_ZONE_DMA_FLAG=0
- CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
-+# CONFIG_SCHED_HRTICK is not set
- CONFIG_CMDLINE=""
-
- #
- # Power management options
- #
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_PM=y
-+# CONFIG_PM_LEGACY is not set
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-
- #
- # CPU Frequency scaling
-@@ -164,9 +189,9 @@ CONFIG_CPU_FREQ=y
- CONFIG_CPU_FREQ_TABLE=y
- # CONFIG_CPU_FREQ_DEBUG is not set
- # CONFIG_CPU_FREQ_STAT is not set
--CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
- # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
--# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
- # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
- CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
- # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-@@ -202,6 +227,7 @@ CONFIG_XFRM=y
- CONFIG_XFRM_USER=y
- # CONFIG_XFRM_SUB_POLICY is not set
- # CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
- CONFIG_NET_KEY=y
- # CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
-@@ -260,82 +286,33 @@ CONFIG_IPV6_SIT=y
- # CONFIG_NETWORK_SECMARK is not set
- CONFIG_NETFILTER=y
- # CONFIG_NETFILTER_DEBUG is not set
--CONFIG_BRIDGE_NETFILTER=y
-+# CONFIG_NETFILTER_ADVANCED is not set
-
- #
- # Core Netfilter Configuration
- #
--# CONFIG_NETFILTER_NETLINK is not set
--CONFIG_NF_CONNTRACK_ENABLED=m
-+CONFIG_NETFILTER_NETLINK=m
-+CONFIG_NETFILTER_NETLINK_LOG=m
- CONFIG_NF_CONNTRACK=m
--CONFIG_NF_CT_ACCT=y
--CONFIG_NF_CONNTRACK_MARK=y
--# CONFIG_NF_CONNTRACK_EVENTS is not set
--CONFIG_NF_CT_PROTO_GRE=m
--# CONFIG_NF_CT_PROTO_SCTP is not set
--# CONFIG_NF_CT_PROTO_UDPLITE is not set
--CONFIG_NF_CONNTRACK_AMANDA=m
- CONFIG_NF_CONNTRACK_FTP=m
--CONFIG_NF_CONNTRACK_H323=m
- CONFIG_NF_CONNTRACK_IRC=m
--CONFIG_NF_CONNTRACK_NETBIOS_NS=m
--CONFIG_NF_CONNTRACK_PPTP=m
--CONFIG_NF_CONNTRACK_SANE=m
- CONFIG_NF_CONNTRACK_SIP=m
--CONFIG_NF_CONNTRACK_TFTP=m
-+CONFIG_NF_CT_NETLINK=m
- CONFIG_NETFILTER_XTABLES=y
--CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
--# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
--# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
- CONFIG_NETFILTER_XT_TARGET_MARK=m
--CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
- CONFIG_NETFILTER_XT_TARGET_NFLOG=m
--# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
--# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
- CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
--CONFIG_NETFILTER_XT_MATCH_COMMENT=m
--CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
--# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
--CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
- CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
--# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
--# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
--CONFIG_NETFILTER_XT_MATCH_ESP=m
--CONFIG_NETFILTER_XT_MATCH_HELPER=m
--CONFIG_NETFILTER_XT_MATCH_LENGTH=m
--CONFIG_NETFILTER_XT_MATCH_LIMIT=m
--CONFIG_NETFILTER_XT_MATCH_MAC=m
- CONFIG_NETFILTER_XT_MATCH_MARK=m
- CONFIG_NETFILTER_XT_MATCH_POLICY=m
--CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
--# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
--CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
--CONFIG_NETFILTER_XT_MATCH_QUOTA=m
--CONFIG_NETFILTER_XT_MATCH_REALM=m
--# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
- CONFIG_NETFILTER_XT_MATCH_STATE=m
--CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
--CONFIG_NETFILTER_XT_MATCH_STRING=m
--CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
--# CONFIG_NETFILTER_XT_MATCH_TIME is not set
--# CONFIG_NETFILTER_XT_MATCH_U32 is not set
--CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
- #
- # IP: Netfilter Configuration
- #
- CONFIG_NF_CONNTRACK_IPV4=m
- CONFIG_NF_CONNTRACK_PROC_COMPAT=y
--# CONFIG_IP_NF_QUEUE is not set
- CONFIG_IP_NF_IPTABLES=m
--CONFIG_IP_NF_MATCH_IPRANGE=m
--CONFIG_IP_NF_MATCH_TOS=m
--CONFIG_IP_NF_MATCH_RECENT=m
--CONFIG_IP_NF_MATCH_ECN=m
--CONFIG_IP_NF_MATCH_AH=m
--CONFIG_IP_NF_MATCH_TTL=m
--CONFIG_IP_NF_MATCH_OWNER=m
--CONFIG_IP_NF_MATCH_ADDRTYPE=m
- CONFIG_IP_NF_FILTER=m
- CONFIG_IP_NF_TARGET_REJECT=m
- CONFIG_IP_NF_TARGET_LOG=m
-@@ -343,54 +320,25 @@ CONFIG_IP_NF_TARGET_LOG=m
- CONFIG_NF_NAT=m
- CONFIG_NF_NAT_NEEDED=y
- CONFIG_IP_NF_TARGET_MASQUERADE=m
--CONFIG_IP_NF_TARGET_REDIRECT=m
--CONFIG_IP_NF_TARGET_NETMAP=m
--CONFIG_IP_NF_TARGET_SAME=m
--CONFIG_NF_NAT_SNMP_BASIC=m
--CONFIG_NF_NAT_PROTO_GRE=m
- CONFIG_NF_NAT_FTP=m
- CONFIG_NF_NAT_IRC=m
--CONFIG_NF_NAT_TFTP=m
--CONFIG_NF_NAT_AMANDA=m
--CONFIG_NF_NAT_PPTP=m
--CONFIG_NF_NAT_H323=m
-+# CONFIG_NF_NAT_TFTP is not set
-+# CONFIG_NF_NAT_AMANDA is not set
-+# CONFIG_NF_NAT_PPTP is not set
-+# CONFIG_NF_NAT_H323 is not set
- CONFIG_NF_NAT_SIP=m
- CONFIG_IP_NF_MANGLE=m
--CONFIG_IP_NF_TARGET_TOS=m
--CONFIG_IP_NF_TARGET_ECN=m
--CONFIG_IP_NF_TARGET_TTL=m
--CONFIG_IP_NF_TARGET_CLUSTERIP=m
--CONFIG_IP_NF_RAW=m
--CONFIG_IP_NF_ARPTABLES=m
--CONFIG_IP_NF_ARPFILTER=m
--CONFIG_IP_NF_ARP_MANGLE=m
-
- #
--# IPv6: Netfilter Configuration (EXPERIMENTAL)
-+# IPv6: Netfilter Configuration
- #
- CONFIG_NF_CONNTRACK_IPV6=m
--CONFIG_IP6_NF_QUEUE=m
- CONFIG_IP6_NF_IPTABLES=m
--CONFIG_IP6_NF_MATCH_RT=m
--CONFIG_IP6_NF_MATCH_OPTS=m
--CONFIG_IP6_NF_MATCH_FRAG=m
--CONFIG_IP6_NF_MATCH_HL=m
--CONFIG_IP6_NF_MATCH_OWNER=m
- CONFIG_IP6_NF_MATCH_IPV6HEADER=m
--CONFIG_IP6_NF_MATCH_AH=m
--CONFIG_IP6_NF_MATCH_MH=m
--CONFIG_IP6_NF_MATCH_EUI64=m
- CONFIG_IP6_NF_FILTER=m
- CONFIG_IP6_NF_TARGET_LOG=m
- CONFIG_IP6_NF_TARGET_REJECT=m
- CONFIG_IP6_NF_MANGLE=m
--CONFIG_IP6_NF_TARGET_HL=m
--CONFIG_IP6_NF_RAW=m
--
--#
--# Bridge: Netfilter Configuration
--#
--# CONFIG_BRIDGE_NF_EBTABLES is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
-@@ -407,7 +355,6 @@ CONFIG_LLC=m
- # CONFIG_ECONET is not set
- # CONFIG_WAN_ROUTER is not set
- # CONFIG_NET_SCHED is not set
--CONFIG_NET_CLS_ROUTE=y
-
- #
- # Network testing
-@@ -415,6 +362,7 @@ CONFIG_NET_CLS_ROUTE=y
- # CONFIG_NET_PKTGEN is not set
- # CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
-@@ -531,11 +479,18 @@ CONFIG_BLK_DEV_NBD=m
- CONFIG_BLK_DEV_RAM=m
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=4096
--CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_BLK_DEV_XIP is not set
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
--# CONFIG_MISC_DEVICES is not set
--# CONFIG_IDE is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_ATMEL_PWM is not set
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_ATMEL_SSC is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-
- #
- # SCSI device support
-@@ -568,11 +523,13 @@ CONFIG_PHYLIB=y
- # CONFIG_SMSC_PHY is not set
- # CONFIG_BROADCOM_PHY is not set
- # CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
- # CONFIG_FIXED_PHY is not set
- # CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
- # CONFIG_MII is not set
- CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
- # CONFIG_IBM_NEW_EMAC_ZMII is not set
- # CONFIG_IBM_NEW_EMAC_RGMII is not set
- # CONFIG_IBM_NEW_EMAC_TAH is not set
-@@ -599,7 +556,6 @@ CONFIG_PPPOE=m
- # CONFIG_PPPOL2TP is not set
- # CONFIG_SLIP is not set
- CONFIG_SLHC=m
--# CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-@@ -633,6 +589,7 @@ CONFIG_SLHC=m
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
- # CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -640,8 +597,6 @@ CONFIG_UNIX98_PTYS=y
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
--# CONFIG_RTC is not set
--# CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-@@ -659,6 +614,7 @@ CONFIG_I2C_ALGOBIT=m
- #
- # I2C Hardware Bus support
- #
-+CONFIG_I2C_ATMELTWI=m
- CONFIG_I2C_GPIO=m
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
-@@ -669,13 +625,12 @@ CONFIG_I2C_GPIO=m
- #
- # Miscellaneous I2C Chip support
- #
--# CONFIG_SENSORS_DS1337 is not set
--# CONFIG_SENSORS_DS1374 is not set
- # CONFIG_DS1682 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_PCF8575 is not set
- # CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
- # CONFIG_SENSORS_MAX6875 is not set
- # CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
-@@ -702,9 +657,27 @@ CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_AT25 is not set
- CONFIG_SPI_SPIDEV=m
- # CONFIG_SPI_TLE62X0 is not set
-+CONFIG_HAVE_GPIO_LIB=y
-+
-+#
-+# GPIO Support
-+#
-+# CONFIG_DEBUG_GPIO is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MCP23S08 is not set
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
-
-@@ -757,10 +730,6 @@ CONFIG_USB_SUPPORT=y
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
--
--#
--# USB Gadget Support
--#
- CONFIG_USB_GADGET=y
- # CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
-@@ -787,21 +756,24 @@ CONFIG_USB_FILE_STORAGE=m
- # CONFIG_USB_FILE_STORAGE_TEST is not set
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
--CONFIG_MMC=m
-+# CONFIG_USB_G_PRINTER is not set
-+CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
- # CONFIG_MMC_UNSAFE_RESUME is not set
-
- #
- # MMC/SD Card Drivers
- #
--CONFIG_MMC_BLOCK=m
-+CONFIG_MMC_BLOCK=y
- CONFIG_MMC_BLOCK_BOUNCE=y
- # CONFIG_SDIO_UART is not set
-
- #
- # MMC/SD Host Controller Drivers
- #
-+CONFIG_MMC_ATMELMCI=y
- CONFIG_MMC_SPI=m
-+# CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
- CONFIG_LEDS_CLASS=y
-
-@@ -844,19 +816,22 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_PCF8563 is not set
- # CONFIG_RTC_DRV_PCF8583 is not set
- # CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-
- #
- # SPI RTC drivers
- #
--# CONFIG_RTC_DRV_RS5C348 is not set
- # CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-
- #
- # Platform RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1511 is not set
- # CONFIG_RTC_DRV_DS1553 is not set
--# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-@@ -874,25 +849,23 @@ CONFIG_RTC_DRV_AT32AP700X=y
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
- # CONFIG_OCFS2_FS is not set
--# CONFIG_MINIX_FS is not set
--# CONFIG_ROMFS_FS is not set
-+# CONFIG_DNOTIFY is not set
- CONFIG_INOTIFY=y
- CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
--# CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
- CONFIG_FUSE_FS=m
-@@ -923,7 +896,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-@@ -948,8 +921,10 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
- CONFIG_NETWORK_FILESYSTEMS=y
-@@ -1030,11 +1005,6 @@ CONFIG_NLS_ISO8859_1=m
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=m
- # CONFIG_DLM is not set
--CONFIG_INSTRUMENTATION=y
--CONFIG_PROFILING=y
--CONFIG_OPROFILE=m
--CONFIG_KPROBES=y
--# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
-@@ -1053,6 +1023,7 @@ CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
- # CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-@@ -1069,9 +1040,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_LIST is not set
- # CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
--# CONFIG_FORCED_INLINING is not set
- # CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
- # CONFIG_LKDTM is not set
- # CONFIG_FAULT_INJECTION is not set
- # CONFIG_SAMPLES is not set
-@@ -1084,7 +1056,9 @@ CONFIG_FRAME_POINTER=y
- # CONFIG_SECURITY_FILE_CAPABILITIES is not set
- CONFIG_CRYPTO=y
- CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=y
- CONFIG_CRYPTO_BLKCIPHER=y
-+# CONFIG_CRYPTO_SEQIV is not set
- CONFIG_CRYPTO_HASH=y
- CONFIG_CRYPTO_MANAGER=y
- CONFIG_CRYPTO_HMAC=y
-@@ -1103,6 +1077,9 @@ CONFIG_CRYPTO_CBC=y
- CONFIG_CRYPTO_PCBC=m
- # CONFIG_CRYPTO_LRW is not set
- # CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_CCM is not set
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_DES=y
- # CONFIG_CRYPTO_FCRYPT is not set
-@@ -1117,12 +1094,14 @@ CONFIG_CRYPTO_ARC4=m
- # CONFIG_CRYPTO_KHAZAD is not set
- # CONFIG_CRYPTO_ANUBIS is not set
- # CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
- CONFIG_CRYPTO_DEFLATE=y
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
- # CONFIG_CRYPTO_CRC32C is not set
- # CONFIG_CRYPTO_CAMELLIA is not set
- # CONFIG_CRYPTO_TEST is not set
--# CONFIG_CRYPTO_AUTHENC is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+# CONFIG_CRYPTO_LZO is not set
- CONFIG_CRYPTO_HW=y
-
- #
-@@ -1137,10 +1116,7 @@ CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
--CONFIG_TEXTSEARCH=y
--CONFIG_TEXTSEARCH_KMP=m
--CONFIG_TEXTSEARCH_BM=m
--CONFIG_TEXTSEARCH_FSM=m
-+CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
---- a/arch/avr32/configs/atstk1002_defconfig
-+++ b/arch/avr32/configs/atstk1002_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.24-rc7
--# Wed Jan 9 23:07:43 2008
-+# Linux kernel version: 2.6.25.4
-+# Wed Jun 11 15:29:18 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
- # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
- # CONFIG_ARCH_HAS_ILOG2_U32 is not set
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
--CONFIG_ARCH_SUPPORTS_OPROFILE=y
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
- CONFIG_GENERIC_BUG=y
-@@ -36,15 +36,15 @@ CONFIG_SYSVIPC_SYSCTL=y
- CONFIG_POSIX_MQUEUE=y
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
--# CONFIG_USER_NS is not set
--# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
--# CONFIG_FAIR_GROUP_SCHED is not set
-+# CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
- CONFIG_RELAY=y
-+# CONFIG_NAMESPACES is not set
- CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-@@ -58,11 +58,13 @@ CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
- CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
- # CONFIG_BASE_FULL is not set
- CONFIG_FUTEX=y
- CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
- CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
-@@ -70,6 +72,14 @@ CONFIG_SLUB_DEBUG=y
- # CONFIG_SLAB is not set
- CONFIG_SLUB=y
- # CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
-@@ -98,10 +108,15 @@ CONFIG_IOSCHED_CFQ=y
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-
- #
- # System Type and features
- #
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-@@ -113,12 +128,16 @@ CONFIG_BOARD_ATSTK1000=y
- CONFIG_BOARD_ATSTK1002=y
- # CONFIG_BOARD_ATSTK1003 is not set
- # CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
- # CONFIG_BOARD_ATSTK1000_J2_LED is not set
- # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
- # CONFIG_BOARD_ATSTK1000_J2_RGB is not set
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
-+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
-+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
- CONFIG_LOADER_U_BOOT=y
-
- #
-@@ -127,6 +146,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP700X_32_BIT_SMC is not set
- CONFIG_AP700X_16_BIT_SMC=y
- # CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -152,16 +172,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- CONFIG_ZONE_DMA_FLAG=0
- CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
-+# CONFIG_SCHED_HRTICK is not set
- CONFIG_CMDLINE=""
-
- #
- # Power management options
- #
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_PM=y
-+# CONFIG_PM_LEGACY is not set
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-
- #
- # CPU Frequency scaling
-@@ -170,9 +200,9 @@ CONFIG_CPU_FREQ=y
- CONFIG_CPU_FREQ_TABLE=y
- # CONFIG_CPU_FREQ_DEBUG is not set
- # CONFIG_CPU_FREQ_STAT is not set
--CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
- # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
--# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
- # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
- CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
- # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-@@ -208,6 +238,7 @@ CONFIG_XFRM=y
- CONFIG_XFRM_USER=m
- # CONFIG_XFRM_SUB_POLICY is not set
- # CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
- CONFIG_NET_KEY=m
- # CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
-@@ -279,6 +310,7 @@ CONFIG_LLC=m
- # CONFIG_NET_PKTGEN is not set
- # CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
-@@ -395,13 +427,18 @@ CONFIG_BLK_DEV_NBD=m
- CONFIG_BLK_DEV_RAM=m
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=4096
--CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_BLK_DEV_XIP is not set
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
- CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
- # CONFIG_EEPROM_93CX6 is not set
- CONFIG_ATMEL_SSC=m
--# CONFIG_IDE is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-
- #
- # SCSI device support
-@@ -444,6 +481,7 @@ CONFIG_SCSI_WAIT_SCAN=m
- # CONFIG_SCSI_LOWLEVEL is not set
- CONFIG_ATA=m
- # CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_MV is not set
- CONFIG_PATA_AT32=m
- # CONFIG_PATA_PLATFORM is not set
- # CONFIG_MD is not set
-@@ -469,11 +507,13 @@ CONFIG_PHYLIB=y
- # CONFIG_SMSC_PHY is not set
- # CONFIG_BROADCOM_PHY is not set
- # CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
- # CONFIG_FIXED_PHY is not set
- # CONFIG_MDIO_BITBANG is not set
- CONFIG_NET_ETHERNET=y
- # CONFIG_MII is not set
- CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
- # CONFIG_IBM_NEW_EMAC_ZMII is not set
- # CONFIG_IBM_NEW_EMAC_RGMII is not set
- # CONFIG_IBM_NEW_EMAC_TAH is not set
-@@ -500,7 +540,6 @@ CONFIG_PPP_BSDCOMP=m
- # CONFIG_PPPOL2TP is not set
- # CONFIG_SLIP is not set
- CONFIG_SLHC=m
--# CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-@@ -568,6 +607,7 @@ CONFIG_MOUSE_GPIO=m
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
- # CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -575,8 +615,6 @@ CONFIG_UNIX98_PTYS=y
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
--# CONFIG_RTC is not set
--# CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-@@ -594,6 +632,7 @@ CONFIG_I2C_ALGOBIT=m
- #
- # I2C Hardware Bus support
- #
-+CONFIG_I2C_ATMELTWI=m
- CONFIG_I2C_GPIO=m
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
-@@ -604,13 +643,12 @@ CONFIG_I2C_GPIO=m
- #
- # Miscellaneous I2C Chip support
- #
--# CONFIG_SENSORS_DS1337 is not set
--# CONFIG_SENSORS_DS1374 is not set
- # CONFIG_DS1682 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_PCF8575 is not set
- # CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
- # CONFIG_SENSORS_MAX6875 is not set
- # CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
-@@ -637,9 +675,27 @@ CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_AT25 is not set
- CONFIG_SPI_SPIDEV=m
- # CONFIG_SPI_TLE62X0 is not set
-+CONFIG_HAVE_GPIO_LIB=y
-+
-+#
-+# GPIO Support
-+#
-+# CONFIG_DEBUG_GPIO is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MCP23S08 is not set
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
-
-@@ -732,12 +788,18 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
- #
- # Generic devices
- #
-+CONFIG_SND_AC97_CODEC=m
- # CONFIG_SND_DUMMY is not set
- # CONFIG_SND_MTPAV is not set
- # CONFIG_SND_SERIAL_U16550 is not set
- # CONFIG_SND_MPU401 is not set
-
- #
-+# AVR32 devices
-+#
-+CONFIG_SND_ATMEL_AC97=m
-+
-+#
- # SPI devices
- #
- CONFIG_SND_AT73C213=m
-@@ -753,9 +815,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
- #
-
- #
-+# ALSA SoC audio for Freescale SOCs
-+#
-+
-+#
- # Open Sound System
- #
- # CONFIG_SOUND_PRIME is not set
-+CONFIG_AC97_BUS=m
- # CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
- # CONFIG_USB_ARCH_HAS_HCD is not set
-@@ -765,10 +832,6 @@ CONFIG_USB_SUPPORT=y
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
--
--#
--# USB Gadget Support
--#
- CONFIG_USB_GADGET=y
- # CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
-@@ -796,27 +859,31 @@ CONFIG_USB_FILE_STORAGE=m
- # CONFIG_USB_FILE_STORAGE_TEST is not set
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
--CONFIG_MMC=m
-+# CONFIG_USB_G_PRINTER is not set
-+CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
- # CONFIG_MMC_UNSAFE_RESUME is not set
-
- #
- # MMC/SD Card Drivers
- #
--CONFIG_MMC_BLOCK=m
-+CONFIG_MMC_BLOCK=y
- CONFIG_MMC_BLOCK_BOUNCE=y
- # CONFIG_SDIO_UART is not set
-
- #
- # MMC/SD Host Controller Drivers
- #
-+CONFIG_MMC_ATMELMCI=y
- CONFIG_MMC_SPI=m
-+# CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
- CONFIG_LEDS_CLASS=m
-
- #
- # LED drivers
- #
-+CONFIG_LEDS_ATMEL_PWM=m
- CONFIG_LEDS_GPIO=m
-
- #
-@@ -853,19 +920,22 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_PCF8563 is not set
- # CONFIG_RTC_DRV_PCF8583 is not set
- # CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-
- #
- # SPI RTC drivers
- #
--# CONFIG_RTC_DRV_RS5C348 is not set
- # CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-
- #
- # Platform RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1511 is not set
- # CONFIG_RTC_DRV_DS1553 is not set
--# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-@@ -883,13 +953,13 @@ CONFIG_RTC_DRV_AT32AP700X=y
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
-@@ -897,12 +967,10 @@ CONFIG_JBD=m
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
- # CONFIG_OCFS2_FS is not set
--CONFIG_MINIX_FS=m
--# CONFIG_ROMFS_FS is not set
-+# CONFIG_DNOTIFY is not set
- CONFIG_INOTIFY=y
- CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
--# CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
- CONFIG_FUSE_FS=m
-@@ -933,7 +1001,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--# CONFIG_CONFIGFS_FS is not set
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-@@ -957,8 +1025,10 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=m
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
- CONFIG_NETWORK_FILESYSTEMS=y
-@@ -1028,11 +1098,6 @@ CONFIG_NLS_ISO8859_1=m
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=m
- # CONFIG_DLM is not set
--CONFIG_INSTRUMENTATION=y
--CONFIG_PROFILING=y
--CONFIG_OPROFILE=m
--CONFIG_KPROBES=y
--# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
-@@ -1051,6 +1116,7 @@ CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
- # CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-@@ -1067,9 +1133,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_LIST is not set
- # CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
--CONFIG_FORCED_INLINING=y
- # CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
- # CONFIG_LKDTM is not set
- # CONFIG_FAULT_INJECTION is not set
- # CONFIG_SAMPLES is not set
-@@ -1082,7 +1149,9 @@ CONFIG_FORCED_INLINING=y
- # CONFIG_SECURITY_FILE_CAPABILITIES is not set
- CONFIG_CRYPTO=y
- CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_AEAD=m
- CONFIG_CRYPTO_BLKCIPHER=m
-+# CONFIG_CRYPTO_SEQIV is not set
- CONFIG_CRYPTO_HASH=m
- CONFIG_CRYPTO_MANAGER=m
- CONFIG_CRYPTO_HMAC=m
-@@ -1101,6 +1170,9 @@ CONFIG_CRYPTO_CBC=m
- # CONFIG_CRYPTO_PCBC is not set
- # CONFIG_CRYPTO_LRW is not set
- # CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_CCM is not set
- # CONFIG_CRYPTO_CRYPTD is not set
- CONFIG_CRYPTO_DES=m
- # CONFIG_CRYPTO_FCRYPT is not set
-@@ -1115,12 +1187,14 @@ CONFIG_CRYPTO_DES=m
- # CONFIG_CRYPTO_KHAZAD is not set
- # CONFIG_CRYPTO_ANUBIS is not set
- # CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
- CONFIG_CRYPTO_DEFLATE=m
- # CONFIG_CRYPTO_MICHAEL_MIC is not set
- # CONFIG_CRYPTO_CRC32C is not set
- # CONFIG_CRYPTO_CAMELLIA is not set
- # CONFIG_CRYPTO_TEST is not set
--# CONFIG_CRYPTO_AUTHENC is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_LZO is not set
- # CONFIG_CRYPTO_HW is not set
-
- #
-@@ -1135,6 +1209,7 @@ CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
---- a/arch/avr32/configs/atstk1003_defconfig
-+++ b/arch/avr32/configs/atstk1003_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.24-rc7
--# Wed Jan 9 22:54:34 2008
-+# Linux kernel version: 2.6.25.4
-+# Wed Jun 11 15:33:36 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
- # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
- # CONFIG_ARCH_HAS_ILOG2_U32 is not set
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
--CONFIG_ARCH_SUPPORTS_OPROFILE=y
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
- CONFIG_GENERIC_BUG=y
-@@ -39,17 +39,15 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
- CONFIG_TASKSTATS=y
- CONFIG_TASK_DELAY_ACCT=y
- # CONFIG_TASK_XACCT is not set
--# CONFIG_USER_NS is not set
--# CONFIG_PID_NS is not set
- CONFIG_AUDIT=y
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
--CONFIG_FAIR_GROUP_SCHED=y
--CONFIG_FAIR_USER_SCHED=y
--# CONFIG_FAIR_CGROUP_SCHED is not set
-+# CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
- CONFIG_RELAY=y
-+# CONFIG_NAMESPACES is not set
- CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-@@ -63,11 +61,13 @@ CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
- CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
- # CONFIG_BASE_FULL is not set
- CONFIG_FUTEX=y
- CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
- CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
-@@ -75,6 +75,14 @@ CONFIG_VM_EVENT_COUNTERS=y
- # CONFIG_SLAB is not set
- CONFIG_SLUB=y
- # CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
- CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
-@@ -103,10 +111,15 @@ CONFIG_IOSCHED_CFQ=y
- CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-
- #
- # System Type and features
- #
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-@@ -118,12 +131,16 @@ CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATSTK1002 is not set
- CONFIG_BOARD_ATSTK1003=y
- # CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
- # CONFIG_BOARD_ATSTK1000_J2_LED is not set
- # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
- # CONFIG_BOARD_ATSTK1000_J2_RGB is not set
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
-+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
-+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
- CONFIG_LOADER_U_BOOT=y
-
- #
-@@ -132,6 +149,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP700X_32_BIT_SMC is not set
- CONFIG_AP700X_16_BIT_SMC=y
- # CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -157,16 +175,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- CONFIG_ZONE_DMA_FLAG=0
- CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
-+# CONFIG_SCHED_HRTICK is not set
- CONFIG_CMDLINE=""
-
- #
- # Power management options
- #
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_PM=y
-+# CONFIG_PM_LEGACY is not set
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-
- #
- # CPU Frequency scaling
-@@ -175,9 +203,9 @@ CONFIG_CPU_FREQ=y
- CONFIG_CPU_FREQ_TABLE=y
- # CONFIG_CPU_FREQ_DEBUG is not set
- # CONFIG_CPU_FREQ_STAT is not set
--CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
- # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
--# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
- # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
- CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
- # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-@@ -260,6 +288,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_NET_PKTGEN is not set
- # CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
-@@ -376,13 +405,18 @@ CONFIG_BLK_DEV_NBD=m
- CONFIG_BLK_DEV_RAM=m
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=4096
--CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_BLK_DEV_XIP is not set
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
- CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
- # CONFIG_EEPROM_93CX6 is not set
- CONFIG_ATMEL_SSC=m
--# CONFIG_IDE is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-
- #
- # SCSI device support
-@@ -427,6 +461,7 @@ CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_SCSI_DEBUG is not set
- CONFIG_ATA=m
- # CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_MV is not set
- CONFIG_PATA_AT32=m
- # CONFIG_PATA_PLATFORM is not set
- # CONFIG_MD is not set
-@@ -460,7 +495,6 @@ CONFIG_PPP_BSDCOMP=m
- # CONFIG_PPPOL2TP is not set
- # CONFIG_SLIP is not set
- CONFIG_SLHC=m
--# CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-@@ -528,6 +562,7 @@ CONFIG_MOUSE_GPIO=m
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
- # CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -535,8 +570,6 @@ CONFIG_UNIX98_PTYS=y
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
--# CONFIG_RTC is not set
--# CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
-@@ -554,6 +587,7 @@ CONFIG_I2C_ALGOBIT=m
- #
- # I2C Hardware Bus support
- #
-+CONFIG_I2C_ATMELTWI=m
- CONFIG_I2C_GPIO=m
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
-@@ -564,13 +598,12 @@ CONFIG_I2C_GPIO=m
- #
- # Miscellaneous I2C Chip support
- #
--# CONFIG_SENSORS_DS1337 is not set
--# CONFIG_SENSORS_DS1374 is not set
- # CONFIG_DS1682 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
--# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_PCF8575 is not set
- # CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
- # CONFIG_SENSORS_MAX6875 is not set
- # CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
-@@ -597,9 +630,27 @@ CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_AT25 is not set
- CONFIG_SPI_SPIDEV=m
- # CONFIG_SPI_TLE62X0 is not set
-+CONFIG_HAVE_GPIO_LIB=y
-+
-+#
-+# GPIO Support
-+#
-+# CONFIG_DEBUG_GPIO is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MCP23S08 is not set
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
-
-@@ -665,12 +716,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
- #
- # Generic devices
- #
-+CONFIG_SND_AC97_CODEC=m
- # CONFIG_SND_DUMMY is not set
- # CONFIG_SND_MTPAV is not set
- # CONFIG_SND_SERIAL_U16550 is not set
- # CONFIG_SND_MPU401 is not set
-
- #
-+# AVR32 devices
-+#
-+CONFIG_SND_ATMEL_AC97=m
-+
-+#
- # SPI devices
- #
- CONFIG_SND_AT73C213=m
-@@ -686,9 +743,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
- #
-
- #
-+# ALSA SoC audio for Freescale SOCs
-+#
-+
-+#
- # Open Sound System
- #
- # CONFIG_SOUND_PRIME is not set
-+CONFIG_AC97_BUS=m
- # CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
- # CONFIG_USB_ARCH_HAS_HCD is not set
-@@ -698,10 +760,6 @@ CONFIG_USB_SUPPORT=y
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
--
--#
--# USB Gadget Support
--#
- CONFIG_USB_GADGET=y
- # CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
-@@ -729,27 +787,31 @@ CONFIG_USB_FILE_STORAGE=m
- # CONFIG_USB_FILE_STORAGE_TEST is not set
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
--CONFIG_MMC=m
-+# CONFIG_USB_G_PRINTER is not set
-+CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
- # CONFIG_MMC_UNSAFE_RESUME is not set
-
- #
- # MMC/SD Card Drivers
- #
--CONFIG_MMC_BLOCK=m
-+CONFIG_MMC_BLOCK=y
- # CONFIG_MMC_BLOCK_BOUNCE is not set
- # CONFIG_SDIO_UART is not set
-
- #
- # MMC/SD Host Controller Drivers
- #
-+CONFIG_MMC_ATMELMCI=y
- CONFIG_MMC_SPI=m
-+# CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
- CONFIG_LEDS_CLASS=y
-
- #
- # LED drivers
- #
-+CONFIG_LEDS_ATMEL_PWM=m
- CONFIG_LEDS_GPIO=y
-
- #
-@@ -786,19 +848,22 @@ CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_DRV_PCF8563 is not set
- # CONFIG_RTC_DRV_PCF8583 is not set
- # CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-
- #
- # SPI RTC drivers
- #
--# CONFIG_RTC_DRV_RS5C348 is not set
- # CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-
- #
- # Platform RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1511 is not set
- # CONFIG_RTC_DRV_DS1553 is not set
--# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-@@ -816,13 +881,13 @@ CONFIG_UIO=m
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
-@@ -830,12 +895,10 @@ CONFIG_JBD=m
- # CONFIG_XFS_FS is not set
- # CONFIG_GFS2_FS is not set
- # CONFIG_OCFS2_FS is not set
--# CONFIG_MINIX_FS is not set
--# CONFIG_ROMFS_FS is not set
-+# CONFIG_DNOTIFY is not set
- CONFIG_INOTIFY=y
- CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
--# CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
- CONFIG_FUSE_FS=m
-@@ -866,7 +929,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-@@ -891,8 +954,10 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
- # CONFIG_NETWORK_FILESYSTEMS is not set
-@@ -943,11 +1008,6 @@ CONFIG_NLS_ISO8859_1=m
- # CONFIG_NLS_KOI8_U is not set
- CONFIG_NLS_UTF8=m
- # CONFIG_DLM is not set
--CONFIG_INSTRUMENTATION=y
--CONFIG_PROFILING=y
--CONFIG_OPROFILE=m
--CONFIG_KPROBES=y
--# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
-@@ -965,6 +1025,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
- CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
-+# CONFIG_SLUB_STATS is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-@@ -981,9 +1042,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_LIST is not set
- # CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
--CONFIG_FORCED_INLINING=y
- # CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
- # CONFIG_LKDTM is not set
- # CONFIG_FAULT_INJECTION is not set
- # CONFIG_SAMPLES is not set
-@@ -1009,6 +1071,7 @@ CONFIG_CRC7=m
- CONFIG_AUDIT_GENERIC=y
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
---- a/arch/avr32/configs/atstk1004_defconfig
-+++ b/arch/avr32/configs/atstk1004_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.24-rc7
--# Wed Jan 9 23:04:20 2008
-+# Linux kernel version: 2.6.25.4
-+# Wed Jun 11 15:37:49 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
- # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
- # CONFIG_ARCH_HAS_ILOG2_U32 is not set
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
--CONFIG_ARCH_SUPPORTS_OPROFILE=y
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
- CONFIG_GENERIC_BUG=y
-@@ -34,15 +34,15 @@ CONFIG_LOCALVERSION=""
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
--# CONFIG_USER_NS is not set
--# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
--# CONFIG_FAIR_GROUP_SCHED is not set
-+# CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
- # CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
- # CONFIG_BLK_DEV_INITRD is not set
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -54,24 +54,37 @@ CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
- CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
- # CONFIG_BASE_FULL is not set
- # CONFIG_FUTEX is not set
- # CONFIG_EPOLL is not set
- # CONFIG_SIGNALFD is not set
-+# CONFIG_TIMERFD is not set
- # CONFIG_EVENTFD is not set
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
- # CONFIG_SLAB is not set
- # CONFIG_SLUB is not set
- CONFIG_SLOB=y
-+# CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+# CONFIG_PROC_PAGE_MONITOR is not set
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=1
- # CONFIG_MODULES is not set
- # CONFIG_BLOCK is not set
-+CONFIG_CLASSIC_RCU=y
-
- #
- # System Type and features
- #
-+# CONFIG_TICK_ONESHOT is not set
-+# CONFIG_NO_HZ is not set
-+# CONFIG_HIGH_RES_TIMERS is not set
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-@@ -83,10 +96,14 @@ CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATSTK1002 is not set
- # CONFIG_BOARD_ATSTK1003 is not set
- CONFIG_BOARD_ATSTK1004=y
-+# CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
- # CONFIG_BOARD_ATSTK1000_J2_LED is not set
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
-+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
-+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
- CONFIG_LOADER_U_BOOT=y
-
- #
-@@ -95,6 +112,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP700X_32_BIT_SMC is not set
- CONFIG_AP700X_16_BIT_SMC=y
- # CONFIG_AP700X_8_BIT_SMC is not set
-+# CONFIG_GPIO_DEV is not set
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -120,34 +138,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- CONFIG_ZONE_DMA_FLAG=0
- CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
-+# CONFIG_NMI_DEBUGGING is not set
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
-+# CONFIG_SCHED_HRTICK is not set
- CONFIG_CMDLINE=""
-
- #
- # Power management options
- #
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+# CONFIG_PM is not set
-
- #
- # CPU Frequency scaling
- #
--CONFIG_CPU_FREQ=y
--CONFIG_CPU_FREQ_TABLE=y
--# CONFIG_CPU_FREQ_DEBUG is not set
--# CONFIG_CPU_FREQ_STAT is not set
--CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
--# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
--# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
--# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
--CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
--# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
--CONFIG_CPU_FREQ_GOV_USERSPACE=y
--CONFIG_CPU_FREQ_GOV_ONDEMAND=y
--# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
--CONFIG_CPU_FREQ_AT32AP=y
-+# CONFIG_CPU_FREQ is not set
-
- #
- # Bus options
-@@ -222,6 +232,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- #
- # CONFIG_NET_PKTGEN is not set
- # CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
- # CONFIG_AF_RXRPC is not set
-@@ -321,6 +332,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- # CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
- # CONFIG_MISC_DEVICES is not set
-+# CONFIG_HAVE_IDE is not set
-
- #
- # SCSI device support
-@@ -358,6 +370,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_PDC is not set
- # CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -365,8 +378,6 @@ CONFIG_UNIX98_PTYS=y
- # CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
--# CONFIG_RTC is not set
--# CONFIG_GEN_RTC is not set
- # CONFIG_R3964 is not set
- # CONFIG_TCG_TPM is not set
- # CONFIG_I2C is not set
-@@ -389,9 +400,24 @@ CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_AT25 is not set
- # CONFIG_SPI_SPIDEV is not set
- # CONFIG_SPI_TLE62X0 is not set
-+CONFIG_HAVE_GPIO_LIB=y
-+
-+#
-+# GPIO Support
-+#
-+
-+#
-+# I2C GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MCP23S08 is not set
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- # CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
- CONFIG_WATCHDOG=y
- # CONFIG_WATCHDOG_NOWAYOUT is not set
-
-@@ -471,10 +497,6 @@ CONFIG_USB_SUPPORT=y
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
--
--#
--# USB Gadget Support
--#
- CONFIG_USB_GADGET=y
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
- CONFIG_USB_GADGET_SELECTED=y
-@@ -499,7 +521,9 @@ CONFIG_USB_ETH=y
- # CONFIG_USB_FILE_STORAGE is not set
- # CONFIG_USB_G_SERIAL is not set
- # CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
- # CONFIG_MMC is not set
-+# CONFIG_MEMSTICK is not set
- # CONFIG_NEW_LEDS is not set
- CONFIG_RTC_LIB=y
- CONFIG_RTC_CLASS=y
-@@ -519,15 +543,17 @@ CONFIG_RTC_INTF_DEV=y
- #
- # SPI RTC drivers
- #
--# CONFIG_RTC_DRV_RS5C348 is not set
- # CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-
- #
- # Platform RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1511 is not set
- # CONFIG_RTC_DRV_DS1553 is not set
--# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_M48T86 is not set
- # CONFIG_RTC_DRV_M48T59 is not set
- # CONFIG_RTC_DRV_V3020 is not set
-@@ -545,9 +571,9 @@ CONFIG_RTC_DRV_AT32AP700X=y
- #
- # File systems
- #
-+# CONFIG_DNOTIFY is not set
- # CONFIG_INOTIFY is not set
- # CONFIG_QUOTA is not set
--# CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
- # CONFIG_FUSE_FS is not set
-@@ -580,7 +606,6 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_NETWORK_FILESYSTEMS is not set
- # CONFIG_NLS is not set
- # CONFIG_DLM is not set
--# CONFIG_INSTRUMENTATION is not set
-
- #
- # Kernel hacking
-@@ -616,6 +641,7 @@ CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
- CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/avr32/configs/atstk1006_defconfig
-@@ -0,0 +1,1235 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.25.4
-+# Wed Jun 11 15:40:45 2008
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+CONFIG_RELAY=y
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type and features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP700X=y
-+CONFIG_CPU_AT32AP7000=y
-+CONFIG_BOARD_ATSTK1000=y
-+# CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_ATSTK1002 is not set
-+# CONFIG_BOARD_ATSTK1003 is not set
-+# CONFIG_BOARD_ATSTK1004 is not set
-+CONFIG_BOARD_ATSTK1006=y
-+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-+CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
-+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
-+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+# CONFIG_AP700X_32_BIT_SMC is not set
-+CONFIG_AP700X_16_BIT_SMC=y
-+# CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+CONFIG_DW_DMAC=y
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+# CONFIG_SCHED_HRTICK is not set
-+CONFIG_CMDLINE=""
-+
-+#
-+# Power management options
-+#
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_PM=y
-+# CONFIG_PM_LEGACY is not set
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=m
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=m
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+CONFIG_NET_IPIP=m
-+CONFIG_NET_IPGRE=m
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET_XFRM_MODE_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_BEET=m
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+CONFIG_IPV6=m
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_TUNNEL=m
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+CONFIG_BRIDGE=m
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+CONFIG_LLC=m
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x8000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=m
-+CONFIG_MTD_M25P80=m
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_ATMEL=y
-+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+CONFIG_MTD_UBI=m
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+CONFIG_MTD_UBI_GLUEBI=y
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=m
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=m
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=m
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+CONFIG_ATA=m
-+# CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_MV is not set
-+CONFIG_PATA_AT32=m
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+CONFIG_TUN=m
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MII is not set
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+# CONFIG_PPP_MPPE is not set
-+# CONFIG_PPPOE is not set
-+# CONFIG_PPPOL2TP is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=m
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_VT is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+
-+#
-+# I2C Algorithms
-+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
-+# CONFIG_SPI_TLE62X0 is not set
-+CONFIG_HAVE_GPIO_LIB=y
-+
-+#
-+# GPIO Support
-+#
-+# CONFIG_DEBUG_GPIO is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+# CONFIG_LOGO is not set
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=m
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+CONFIG_SND_AC97_CODEC=m
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+
-+#
-+# AVR32 devices
-+#
-+CONFIG_SND_ATMEL_AC97=m
-+
-+#
-+# SPI devices
-+#
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-+
-+#
-+# System on Chip audio support
-+#
-+# CONFIG_SND_SOC is not set
-+
-+#
-+# SoC Audio support for SuperH
-+#
-+
-+#
-+# ALSA SoC audio for Freescale SOCs
-+#
-+
-+#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_AC97_BUS=m
-+# CONFIG_HID_SUPPORT is not set
-+CONFIG_USB_SUPPORT=y
-+# CONFIG_USB_ARCH_HAS_HCD is not set
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_ATMELMCI=y
-+CONFIG_MMC_SPI=m
-+# CONFIG_MEMSTICK is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_ATMEL_PWM=m
-+CONFIG_LEDS_GPIO=m
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
-+
-+#
-+# Userspace I/O
-+#
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_DNOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_KCORE=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=m
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_AEAD=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+# CONFIG_CRYPTO_SEQIV is not set
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=m
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=m
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_ECB is not set
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_XTS is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_DES=m
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+CONFIG_CRYPTO_DEFLATE=m
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_LZO is not set
-+# CONFIG_CRYPTO_HW is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=m
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC_ITU_T=m
-+CONFIG_CRC32=y
-+CONFIG_CRC7=m
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/avr32/drivers/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.c
-@@ -0,0 +1,761 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+
-+#include "dw-dmac.h"
-+
-+#define DMAC_NR_CHANNELS 3
-+#define DMAC_MAX_BLOCKSIZE 4095
-+
-+enum {
-+ CH_STATE_FREE = 0,
-+ CH_STATE_ALLOCATED,
-+ CH_STATE_BUSY,
-+};
-+
-+struct dw_dma_lli {
-+ dma_addr_t sar;
-+ dma_addr_t dar;
-+ dma_addr_t llp;
-+ u32 ctllo;
-+ u32 ctlhi;
-+ u32 sstat;
-+ u32 dstat;
-+};
-+
-+struct dw_dma_block {
-+ struct dw_dma_lli *lli_vaddr;
-+ dma_addr_t lli_dma_addr;
-+};
-+
-+struct dw_dma_channel {
-+ unsigned int state;
-+ int is_cyclic;
-+ struct dma_request_sg *req_sg;
-+ struct dma_request_cyclic *req_cyclic;
-+ unsigned int nr_blocks;
-+ int direction;
-+ struct dw_dma_block *block;
-+};
-+
-+struct dw_dma_controller {
-+ spinlock_t lock;
-+ void * __iomem regs;
-+ struct dma_pool *lli_pool;
-+ struct clk *hclk;
-+ struct dma_controller dma;
-+ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
-+};
-+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
-+
-+#define dmac_writel_hi(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_readl_hi(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_writel_lo(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
-+#define dmac_readl_lo(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg)
-+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
-+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
-+ + DW_DMAC_CHAN_##reg + 4))
-+#define dmac_chan_readl_hi(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
-+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
-+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define dmac_chan_readl_lo(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define set_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
-+#define clear_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
-+
-+static int dmac_alloc_channel(struct dma_controller *_dmac)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+ for (i = 0; i < DMAC_NR_CHANNELS; i++)
-+ if (dmac->channel[i].state == CH_STATE_FREE)
-+ break;
-+
-+ if (i < DMAC_NR_CHANNELS) {
-+ chan = &dmac->channel[i];
-+ chan->state = CH_STATE_ALLOCATED;
-+ } else {
-+ i = -EBUSY;
-+ }
-+
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ return i;
-+}
-+
-+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
-+
-+ dmac->channel[channel].state = CH_STATE_FREE;
-+}
-+
-+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
-+ unsigned int nr_blocks)
-+{
-+ struct dw_dma_block *block;
-+ void *p;
-+ unsigned int i;
-+
-+ block = kmalloc(nr_blocks * sizeof(*block),
-+ GFP_KERNEL);
-+ if (unlikely(!block))
-+ return NULL;
-+
-+ for (i = 0; i < nr_blocks; i++) {
-+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
-+ &block[i].lli_dma_addr);
-+ block[i].lli_vaddr = p;
-+ if (unlikely(!p))
-+ goto fail;
-+ }
-+
-+ return block;
-+
-+fail:
-+ for (i = 0; i < nr_blocks; i++) {
-+ if (!block[i].lli_vaddr)
-+ break;
-+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
-+ block[i].lli_dma_addr);
-+ }
-+ kfree(block);
-+ return NULL;
-+}
-+
-+static void cleanup_channel(struct dw_dma_controller *dmac,
-+ struct dw_dma_channel *chan)
-+{
-+ unsigned int i;
-+
-+ if (chan->nr_blocks > 1) {
-+ for (i = 0; i < chan->nr_blocks; i++)
-+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
-+ chan->block[i].lli_dma_addr);
-+ kfree(chan->block);
-+ }
-+
-+ chan->state = CH_STATE_ALLOCATED;
-+}
-+
-+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
-+ struct dma_request_sg *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+ int ret, i, direction;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || req->block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->req_sg = req;
-+ chan->is_cyclic = 0;
-+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ /*
-+ * There may be limitations in the driver and/or the DMA
-+ * controller that prevents us from sending a whole
-+ * scatterlist item in one go. Taking this into account,
-+ * calculate the number of block transfers we need to set up.
-+ *
-+ * FIXME: Let the peripheral driver know about the maximum
-+ * block size we support. We really don't want to use a
-+ * different block size than what was suggested by the
-+ * peripheral.
-+ *
-+ * Each block will get its own Linked List Item (LLI) below.
-+ */
-+ block_size = req->block_size;
-+ nr_blocks = req->nr_blocks;
-+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
-+ block_size, nr_blocks, req->nr_sg);
-+
-+ BUG_ON(nr_blocks == 0);
-+ chan->nr_blocks = nr_blocks;
-+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
-+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
-+
-+ chan->direction = direction;
-+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+ ctlhi = block_size >> req->width;
-+ ctllo = ((req->direction << 20)
-+ // | (1 << 14) | (1 << 11) // source/dest burst trans len
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
-+
-+ if (nr_blocks == 1) {
-+ /* Only one block: No need to use block chaining */
-+ if (direction == DMA_TO_DEVICE) {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->sg->dma_address);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->data_reg);
-+ ctllo |= 2 << 7; // no dst increment
-+ } else {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->data_reg);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->sg->dma_address);
-+ ctllo |= 2 << 9; // no src increment
-+ }
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
-+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
-+ } else {
-+ struct dw_dma_lli *lli, *lli_prev = NULL;
-+ int j = 0, offset = 0;
-+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, nr_blocks);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
-+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+ /*
-+ * Map scatterlist items to blocks. One scatterlist
-+ * item may need more than one block for the reasons
-+ * mentioned above.
-+ */
-+ for (i = 0; i < nr_blocks; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->sg[j].dma_address + offset;
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->sg[j].dma_address + offset;
-+ }
-+ lli_prev = lli;
-+
-+ offset += block_size;
-+ if (offset > req->sg[j].length) {
-+ j++;
-+ offset = 0;
-+ }
-+ }
-+
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
-+
-+ set_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+ return 0;
-+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
-+
-+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ int ret, i, direction;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+
-+ block_size = (req->buffer_size/req->periods) >> req->width;
-+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || (req->periods == 0)
-+ || block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->is_cyclic = 1;
-+ chan->req_cyclic = req;
-+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ /*
-+ Setup
-+ */
-+ BUG_ON(req->buffer_size % req->periods);
-+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
-+
-+ chan->nr_blocks = req->periods;
-+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
-+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
-+
-+ chan->direction = direction;
-+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+ ctlhi = block_size;
-+ ctllo = ((req->direction << 20)
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
-+
-+ {
-+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
-+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, req->periods);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
-+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+ /*
-+ * Set up a linked list items where each period gets
-+ * an item. The linked list item for the last period
-+ * points back to the star of the buffer making a
-+ * cyclic buffer.
-+ */
-+ for (i = 0; i < req->periods; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);*/
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->buffer_start + i*(block_size << req->width);
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->buffer_start + i*(block_size << req->width);
-+ }
-+ lli_prev = lli;
-+ }
-+ lli->llp = chan->block[0].lli_dma_addr;
-+
-+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi); */
-+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
-+
-+ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+ return 0;
-+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
-+
-+static int dmac_start_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ set_channel_bit(dmac, CH_EN, channel);
-+
-+ return 0;
-+}
-+
-+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ dma_addr_t current_pos;
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ chan = &dmac->channel[channel];
-+
-+ switch (chan->direction) {
-+ case DMA_TO_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
-+ break;
-+ case DMA_FROM_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
-+ break;
-+ default:
-+ return 0;
-+ }
-+
-+
-+ if (!current_pos) {
-+ if (chan->is_cyclic) {
-+ current_pos = chan->req_cyclic->buffer_start;
-+ } else {
-+ current_pos = chan->req_sg->sg->dma_address;
-+ }
-+ }
-+
-+ return current_pos;
-+}
-+
-+
-+static int dmac_stop_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ chan = &dmac->channel[channel];
-+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
-+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
-+ dmac_chan_readl_lo(dmac, channel, DAR),
-+ dmac_chan_readl_lo(dmac, channel, LLP),
-+ dmac_chan_readl_hi(dmac, channel, CTL),
-+ dmac_chan_readl_lo(dmac, channel, CTL));
-+
-+ if (chan->state == CH_STATE_BUSY) {
-+ clear_channel_bit(dmac, CH_EN, channel);
-+ cleanup_channel(dmac, &dmac->channel[channel]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static void dmac_block_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+
-+ while (status) {
-+ struct dma_request *req;
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic
-+ || !chan->req_cyclic->req.block_complete);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
-+ req = &chan->req_sg->req;
-+ }
-+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
-+ req->block_complete(req);
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+ }
-+}
-+
-+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ struct dma_request *req;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+
-+ while (status) {
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
-+
-+ req = &chan->req_sg->req;
-+ BUG_ON(!req);
-+ cleanup_channel(dmac, chan);
-+ if (req->xfer_complete)
-+ req->xfer_complete(req);
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
-+
-+static void dmac_error(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_ERROR);
-+
-+ while (status) {
-+ struct dma_request *req;
-+
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
-+ clear_channel_bit(dmac, CH_EN, chanid);
-+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg);
-+ req = &chan->req_sg->req;
-+ }
-+
-+ cleanup_channel(dmac, chan);
-+ if (req->error)
-+ req->error(req);
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
-+
-+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
-+{
-+ struct dw_dma_controller *dmac = dev_id;
-+ unsigned long status;
-+ int ret = IRQ_NONE;
-+
-+ spin_lock(&dmac->lock);
-+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
-+
-+ while (status) {
-+ ret = IRQ_HANDLED;
-+ if (status & 0x10)
-+ dmac_error(dmac);
-+ if (status & 0x02)
-+ dmac_block_complete(dmac);
-+ if (status & 0x01)
-+ dmac_xfer_complete(dmac);
-+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
-+ }
-+
-+ spin_unlock(&dmac->lock);
-+ return ret;
-+}
-+
-+static int __devinit dmac_probe(struct platform_device *pdev)
-+{
-+ struct dw_dma_controller *dmac;
-+ struct resource *regs;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
-+ if (!dmac)
-+ return -ENOMEM;
-+ memset(dmac, 0, sizeof(*dmac));
-+
-+ dmac->hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(dmac->hclk)) {
-+ ret = PTR_ERR(dmac->hclk);
-+ goto out_free_dmac;
-+ }
-+ clk_enable(dmac->hclk);
-+
-+ ret = -ENOMEM;
-+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
-+ sizeof(struct dw_dma_lli), 4, 0);
-+ if (!dmac->lli_pool)
-+ goto out_disable_clk;
-+
-+ spin_lock_init(&dmac->lock);
-+ dmac->dma.dev = &pdev->dev;
-+ dmac->dma.alloc_channel = dmac_alloc_channel;
-+ dmac->dma.release_channel = dmac_release_channel;
-+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
-+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
-+ dmac->dma.start_request = dmac_start_request;
-+ dmac->dma.stop_request = dmac_stop_request;
-+ dmac->dma.get_current_pos = dmac_get_current_pos;
-+
-+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dmac->regs)
-+ goto out_free_pool;
-+
-+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
-+ if (ret)
-+ goto out_unmap_regs;
-+
-+ /* Enable the DMA controller */
-+ dmac_writel_lo(dmac, CFG, 1);
-+
-+ register_dma_controller(&dmac->dma);
-+
-+ printk(KERN_INFO
-+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
-+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
-+
-+ return 0;
-+
-+out_unmap_regs:
-+ iounmap(dmac->regs);
-+out_free_pool:
-+ dma_pool_destroy(dmac->lli_pool);
-+out_disable_clk:
-+ clk_disable(dmac->hclk);
-+ clk_put(dmac->hclk);
-+out_free_dmac:
-+ kfree(dmac);
-+ return ret;
-+}
-+
-+static struct platform_driver dmac_driver = {
-+ .probe = dmac_probe,
-+ .driver = {
-+ .name = "dmaca",
-+ },
-+};
-+
-+static int __init dmac_init(void)
-+{
-+ return platform_driver_register(&dmac_driver);
-+}
-+subsys_initcall(dmac_init);
-+
-+static void __exit dmac_exit(void)
-+{
-+ platform_driver_unregister(&dmac_driver);
-+}
-+module_exit(dmac_exit);
-+
-+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
-+
-+#define DW_DMAC_CFG 0x398
-+#define DW_DMAC_CH_EN 0x3a0
-+
-+#define DW_DMAC_STATUS_XFER 0x2e8
-+#define DW_DMAC_STATUS_BLOCK 0x2f0
-+#define DW_DMAC_STATUS_ERROR 0x308
-+
-+#define DW_DMAC_MASK_XFER 0x310
-+#define DW_DMAC_MASK_BLOCK 0x318
-+#define DW_DMAC_MASK_ERROR 0x330
-+
-+#define DW_DMAC_CLEAR_XFER 0x338
-+#define DW_DMAC_CLEAR_BLOCK 0x340
-+#define DW_DMAC_CLEAR_ERROR 0x358
-+
-+#define DW_DMAC_STATUS_INT 0x360
-+
-+#define DW_DMAC_CHAN_SAR 0x000
-+#define DW_DMAC_CHAN_DAR 0x008
-+#define DW_DMAC_CHAN_LLP 0x010
-+#define DW_DMAC_CHAN_CTL 0x018
-+#define DW_DMAC_CHAN_SSTAT 0x020
-+#define DW_DMAC_CHAN_DSTAT 0x028
-+#define DW_DMAC_CHAN_SSTATAR 0x030
-+#define DW_DMAC_CHAN_DSTATAR 0x038
-+#define DW_DMAC_CHAN_CFG 0x040
-+#define DW_DMAC_CHAN_SGR 0x048
-+#define DW_DMAC_CHAN_DSR 0x050
-+
-+#endif /* __AVR32_DW_DMAC_H__ */
---- a/arch/avr32/kernel/Makefile
-+++ b/arch/avr32/kernel/Makefile
-@@ -9,6 +9,7 @@ obj-y += syscall_table.o syscall-stub
- obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
- obj-y += signal.o sys_avr32.o process.o time.o
- obj-y += init_task.o switch_to.o cpu.o
-+obj-y += dma-controller.o
- obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES) += kprobes.o
- obj-$(CONFIG_STACKTRACE) += stacktrace.o
---- a/arch/avr32/kernel/avr32_ksyms.c
-+++ b/arch/avr32/kernel/avr32_ksyms.c
-@@ -29,7 +29,9 @@ EXPORT_SYMBOL(__avr32_asr64);
- */
- EXPORT_SYMBOL(memset);
- EXPORT_SYMBOL(memcpy);
-+
- EXPORT_SYMBOL(clear_page);
-+EXPORT_SYMBOL(copy_page);
-
- /*
- * Userspace access stuff.
-@@ -41,6 +43,8 @@ EXPORT_SYMBOL(strncpy_from_user);
- EXPORT_SYMBOL(__strncpy_from_user);
- EXPORT_SYMBOL(clear_user);
- EXPORT_SYMBOL(__clear_user);
-+EXPORT_SYMBOL(strnlen_user);
-+
- EXPORT_SYMBOL(csum_partial);
- EXPORT_SYMBOL(csum_partial_copy_generic);
-
---- /dev/null
-+++ b/arch/avr32/kernel/dma-controller.c
-@@ -0,0 +1,34 @@
-+/*
-+ * Preliminary DMA controller framework for AVR32
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/dma-controller.h>
-+
-+static LIST_HEAD(controllers);
-+
-+int register_dma_controller(struct dma_controller *dmac)
-+{
-+ static int next_id;
-+
-+ dmac->id = next_id++;
-+ list_add_tail(&dmac->list, &controllers);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(register_dma_controller);
-+
-+struct dma_controller *find_dma_controller(int id)
-+{
-+ struct dma_controller *dmac;
-+
-+ list_for_each_entry(dmac, &controllers, list)
-+ if (dmac->id == id)
-+ return dmac;
-+ return NULL;
-+}
-+EXPORT_SYMBOL(find_dma_controller);
---- a/arch/avr32/kernel/entry-avr32b.S
-+++ b/arch/avr32/kernel/entry-avr32b.S
-@@ -74,50 +74,41 @@ exception_vectors:
- .align 2
- bral do_dtlb_modified
-
-- /*
-- * r0 : PGD/PT/PTE
-- * r1 : Offending address
-- * r2 : Scratch register
-- * r3 : Cause (5, 12 or 13)
-- */
- #define tlbmiss_save pushm r0-r3
- #define tlbmiss_restore popm r0-r3
-
-- .section .tlbx.ex.text,"ax",@progbits
-+ .org 0x50
- .global itlb_miss
- itlb_miss:
- tlbmiss_save
- rjmp tlb_miss_common
-
-- .section .tlbr.ex.text,"ax",@progbits
-+ .org 0x60
- dtlb_miss_read:
- tlbmiss_save
- rjmp tlb_miss_common
-
-- .section .tlbw.ex.text,"ax",@progbits
-+ .org 0x70
- dtlb_miss_write:
- tlbmiss_save
-
- .global tlb_miss_common
-+ .align 2
- tlb_miss_common:
- mfsr r0, SYSREG_TLBEAR
- mfsr r1, SYSREG_PTBR
-
-- /* Is it the vmalloc space? */
-- bld r0, 31
-- brcs handle_vmalloc_miss
--
-- /* First level lookup */
-+ /*
-+ * First level lookup: The PGD contains virtual pointers to
-+ * the second-level page tables, but they may be NULL if not
-+ * present.
-+ */
- pgtbl_lookup:
- lsr r2, r0, PGDIR_SHIFT
- ld.w r3, r1[r2 << 2]
- bfextu r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
-- bld r3, _PAGE_BIT_PRESENT
-- brcc page_table_not_present
--
-- /* Translate to virtual address in P1. */
-- andl r3, 0xf000
-- sbr r3, 31
-+ cp.w r3, 0
-+ breq page_table_not_present
-
- /* Second level lookup */
- ld.w r2, r3[r1 << 2]
-@@ -148,16 +139,55 @@ pgtbl_lookup:
- tlbmiss_restore
- rete
-
--handle_vmalloc_miss:
-- /* Simply do the lookup in init's page table */
-+ /* The slow path of the TLB miss handler */
-+ .align 2
-+page_table_not_present:
-+ /* Do we need to synchronize with swapper_pg_dir? */
-+ bld r0, 31
-+ brcs sync_with_swapper_pg_dir
-+
-+page_not_present:
-+ tlbmiss_restore
-+ sub sp, 4
-+ stmts --sp, r0-lr
-+ rcall save_full_context_ex
-+ mfsr r12, SYSREG_ECR
-+ mov r11, sp
-+ rcall do_page_fault
-+ rjmp ret_from_exception
-+
-+ .align 2
-+sync_with_swapper_pg_dir:
-+ /*
-+ * If swapper_pg_dir contains a non-NULL second-level page
-+ * table pointer, copy it into the current PGD. If not, we
-+ * must handle it as a full-blown page fault.
-+ *
-+ * Jumping back to pgtbl_lookup causes an unnecessary lookup,
-+ * but it is guaranteed to be a cache hit, it won't happen
-+ * very often, and we absolutely do not want to sacrifice any
-+ * performance in the fast path in order to improve this.
-+ */
- mov r1, lo(swapper_pg_dir)
- orh r1, hi(swapper_pg_dir)
-+ ld.w r3, r1[r2 << 2]
-+ cp.w r3, 0
-+ breq page_not_present
-+ mfsr r1, SYSREG_PTBR
-+ st.w r1[r2 << 2], r3
- rjmp pgtbl_lookup
-
-+ /*
-+ * We currently have two bytes left at this point until we
-+ * crash into the system call handler...
-+ *
-+ * Don't worry, the assembler will let us know.
-+ */
-+
-
- /* --- System Call --- */
-
-- .section .scall.text,"ax",@progbits
-+ .org 0x100
- system_call:
- #ifdef CONFIG_PREEMPT
- mask_interrupts
-@@ -266,18 +296,6 @@ syscall_exit_work:
- brcc syscall_exit_cont
- rjmp enter_monitor_mode
-
-- /* The slow path of the TLB miss handler */
--page_table_not_present:
--page_not_present:
-- tlbmiss_restore
-- sub sp, 4
-- stmts --sp, r0-lr
-- rcall save_full_context_ex
-- mfsr r12, SYSREG_ECR
-- mov r11, sp
-- rcall do_page_fault
-- rjmp ret_from_exception
--
- /* This function expects to find offending PC in SYSREG_RAR_EX */
- .type save_full_context_ex, @function
- .align 2
-@@ -741,26 +759,6 @@ irq_level\level:
-
- .section .irq.text,"ax",@progbits
-
--.global cpu_idle_sleep
--cpu_idle_sleep:
-- mask_interrupts
-- get_thread_info r8
-- ld.w r9, r8[TI_flags]
-- bld r9, TIF_NEED_RESCHED
-- brcs cpu_idle_enable_int_and_exit
-- sbr r9, TIF_CPU_GOING_TO_SLEEP
-- st.w r8[TI_flags], r9
-- unmask_interrupts
-- sleep 0
--cpu_idle_skip_sleep:
-- mask_interrupts
-- ld.w r9, r8[TI_flags]
-- cbr r9, TIF_CPU_GOING_TO_SLEEP
-- st.w r8[TI_flags], r9
--cpu_idle_enable_int_and_exit:
-- unmask_interrupts
-- retal r12
--
- .global irq_level0
- .global irq_level1
- .global irq_level2
---- a/arch/avr32/kernel/process.c
-+++ b/arch/avr32/kernel/process.c
-@@ -18,11 +18,11 @@
- #include <asm/sysreg.h>
- #include <asm/ocd.h>
-
-+#include <asm/arch/pm.h>
-+
- void (*pm_power_off)(void) = NULL;
- EXPORT_SYMBOL(pm_power_off);
-
--extern void cpu_idle_sleep(void);
--
- /*
- * This file handles the architecture-dependent parts of process handling..
- */
-@@ -54,6 +54,8 @@ void machine_halt(void)
-
- void machine_power_off(void)
- {
-+ if (pm_power_off)
-+ pm_power_off();
- }
-
- void machine_restart(char *cmd)
---- a/arch/avr32/kernel/setup.c
-+++ b/arch/avr32/kernel/setup.c
-@@ -274,6 +274,8 @@ static int __init early_parse_fbmem(char
- printk(KERN_WARNING
- "Failed to allocate framebuffer memory\n");
- fbmem_size = 0;
-+ } else {
-+ memset(__va(fbmem_start), 0, fbmem_size);
- }
- }
-
---- a/arch/avr32/kernel/signal.c
-+++ b/arch/avr32/kernel/signal.c
-@@ -93,6 +93,9 @@ asmlinkage int sys_rt_sigreturn(struct p
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
- goto badframe;
-
-+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
-+ goto badframe;
-+
- pr_debug("Context restored: pc = %08lx, lr = %08lx, sp = %08lx\n",
- regs->pc, regs->lr, regs->sp);
-
---- a/arch/avr32/kernel/time.c
-+++ b/arch/avr32/kernel/time.c
-@@ -1,233 +1,147 @@
- /*
- * Copyright (C) 2004-2007 Atmel Corporation
- *
-- * Based on MIPS implementation arch/mips/kernel/time.c
-- * Copyright 2001 MontaVista Software Inc.
-- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
--
- #include <linux/clk.h>
--#include <linux/clocksource.h>
--#include <linux/time.h>
--#include <linux/module.h>
-+#include <linux/clockchips.h>
-+#include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
--#include <linux/kernel_stat.h>
--#include <linux/errno.h>
--#include <linux/init.h>
--#include <linux/profile.h>
--#include <linux/sysdev.h>
--#include <linux/err.h>
-+#include <linux/kernel.h>
-+#include <linux/time.h>
-
--#include <asm/div64.h>
- #include <asm/sysreg.h>
--#include <asm/io.h>
--#include <asm/sections.h>
-
--/* how many counter cycles in a jiffy? */
--static u32 cycles_per_jiffy;
-+#include <asm/arch/pm.h>
-
--/* the count value for the next timer interrupt */
--static u32 expirelo;
-
--cycle_t __weak read_cycle_count(void)
-+static cycle_t read_cycle_count(void)
- {
- return (cycle_t)sysreg_read(COUNT);
- }
-
--struct clocksource __weak clocksource_avr32 = {
-- .name = "avr32",
-- .rating = 350,
-+/*
-+ * The architectural cycle count registers are a fine clocksource unless
-+ * the system idle loop use sleep states like "idle": the CPU cycles
-+ * measured by COUNT (and COMPARE) don't happen during sleep states.
-+ * Their duration also changes if cpufreq changes the CPU clock rate.
-+ * So we rate the clocksource using COUNT as very low quality.
-+ */
-+static struct clocksource counter = {
-+ .name = "avr32_counter",
-+ .rating = 50,
- .read = read_cycle_count,
- .mask = CLOCKSOURCE_MASK(32),
- .shift = 16,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
- };
-
--irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
--
--struct irqaction timer_irqaction = {
-- .handler = timer_interrupt,
-- .flags = IRQF_DISABLED,
-- .name = "timer",
--};
--
--/*
-- * By default we provide the null RTC ops
-- */
--static unsigned long null_rtc_get_time(void)
--{
-- return mktime(2007, 1, 1, 0, 0, 0);
--}
--
--static int null_rtc_set_time(unsigned long sec)
-+static irqreturn_t timer_interrupt(int irq, void *dev_id)
- {
-- return 0;
--}
--
--static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
--static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
-+ struct clock_event_device *evdev = dev_id;
-
--static void avr32_timer_ack(void)
--{
-- u32 count;
--
-- /* Ack this timer interrupt and set the next one */
-- expirelo += cycles_per_jiffy;
-- /* setting COMPARE to 0 stops the COUNT-COMPARE */
-- if (expirelo == 0) {
-- sysreg_write(COMPARE, expirelo + 1);
-- } else {
-- sysreg_write(COMPARE, expirelo);
-- }
-+ /*
-+ * Disable the interrupt until the clockevent subsystem
-+ * reprograms it.
-+ */
-+ sysreg_write(COMPARE, 0);
-
-- /* Check to see if we have missed any timer interrupts */
-- count = sysreg_read(COUNT);
-- if ((count - expirelo) < 0x7fffffff) {
-- expirelo = count + cycles_per_jiffy;
-- sysreg_write(COMPARE, expirelo);
-- }
-+ evdev->event_handler(evdev);
-+ return IRQ_HANDLED;
- }
-
--int __weak avr32_hpt_init(void)
--{
-- int ret;
-- unsigned long mult, shift, count_hz;
--
-- count_hz = clk_get_rate(boot_cpu_data.clk);
-- shift = clocksource_avr32.shift;
-- mult = clocksource_hz2mult(count_hz, shift);
-- clocksource_avr32.mult = mult;
--
-- {
-- u64 tmp;
--
-- tmp = TICK_NSEC;
-- tmp <<= shift;
-- tmp += mult / 2;
-- do_div(tmp, mult);
--
-- cycles_per_jiffy = tmp;
-- }
-+static struct irqaction timer_irqaction = {
-+ .handler = timer_interrupt,
-+ .flags = IRQF_TIMER | IRQF_DISABLED,
-+ .name = "avr32_comparator",
-+};
-
-- ret = setup_irq(0, &timer_irqaction);
-- if (ret) {
-- pr_debug("timer: could not request IRQ 0: %d\n", ret);
-- return -ENODEV;
-- }
-+static int comparator_next_event(unsigned long delta,
-+ struct clock_event_device *evdev)
-+{
-+ unsigned long flags;
-
-- printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
-- "%lu.%03lu MHz\n",
-- ((count_hz + 500) / 1000) / 1000,
-- ((count_hz + 500) / 1000) % 1000);
-+ raw_local_irq_save(flags);
-
-- return 0;
--}
-+ /* The time to read COUNT then update COMPARE must be less
-+ * than the min_delta_ns value for this clockevent source.
-+ */
-+ sysreg_write(COMPARE, (sysreg_read(COUNT) + delta) ? : 1);
-
--/*
-- * Taken from MIPS c0_hpt_timer_init().
-- *
-- * The reason COUNT is written twice is probably to make sure we don't get any
-- * timer interrupts while we are messing with the counter.
-- */
--int __weak avr32_hpt_start(void)
--{
-- u32 count = sysreg_read(COUNT);
-- expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
-- sysreg_write(COUNT, expirelo - cycles_per_jiffy);
-- sysreg_write(COMPARE, expirelo);
-- sysreg_write(COUNT, count);
-+ raw_local_irq_restore(flags);
-
- return 0;
- }
-
--/*
-- * local_timer_interrupt() does profiling and process accounting on a
-- * per-CPU basis.
-- *
-- * In UP mode, it is invoked from the (global) timer_interrupt.
-- */
--void local_timer_interrupt(int irq, void *dev_id)
-+static void comparator_mode(enum clock_event_mode mode,
-+ struct clock_event_device *evdev)
- {
-- if (current->pid)
-- profile_tick(CPU_PROFILING);
-- update_process_times(user_mode(get_irq_regs()));
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ pr_debug("%s: start\n", evdev->name);
-+ /* FALLTHROUGH */
-+ case CLOCK_EVT_MODE_RESUME:
-+ cpu_disable_idle_sleep();
-+ break;
-+ case CLOCK_EVT_MODE_UNUSED:
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ sysreg_write(COMPARE, 0);
-+ pr_debug("%s: stop\n", evdev->name);
-+ cpu_enable_idle_sleep();
-+ break;
-+ default:
-+ BUG();
-+ }
- }
-
--irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
--{
-- /* ack timer interrupt and try to set next interrupt */
-- avr32_timer_ack();
--
-- /*
-- * Call the generic timer interrupt handler
-- */
-- write_seqlock(&xtime_lock);
-- do_timer(1);
-- write_sequnlock(&xtime_lock);
--
-- /*
-- * In UP mode, we call local_timer_interrupt() to do profiling
-- * and process accounting.
-- *
-- * SMP is not supported yet.
-- */
-- local_timer_interrupt(irq, dev_id);
--
-- return IRQ_HANDLED;
--}
-+static struct clock_event_device comparator = {
-+ .name = "avr32_comparator",
-+ .features = CLOCK_EVT_FEAT_ONESHOT,
-+ .shift = 16,
-+ .rating = 50,
-+ .cpumask = CPU_MASK_CPU0,
-+ .set_next_event = comparator_next_event,
-+ .set_mode = comparator_mode,
-+};
-
- void __init time_init(void)
- {
-+ unsigned long counter_hz;
- int ret;
-
-- /*
-- * Make sure we don't get any COMPARE interrupts before we can
-- * handle them.
-- */
-- sysreg_write(COMPARE, 0);
--
-- xtime.tv_sec = rtc_get_time();
-+ xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
- xtime.tv_nsec = 0;
-
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
-
-- ret = avr32_hpt_init();
-- if (ret) {
-- pr_debug("timer: failed setup: %d\n", ret);
-- return;
-- }
-+ /* figure rate for counter */
-+ counter_hz = clk_get_rate(boot_cpu_data.clk);
-+ counter.mult = clocksource_hz2mult(counter_hz, counter.shift);
-
-- ret = clocksource_register(&clocksource_avr32);
-+ ret = clocksource_register(&counter);
- if (ret)
- pr_debug("timer: could not register clocksource: %d\n", ret);
-
-- ret = avr32_hpt_start();
-- if (ret) {
-- pr_debug("timer: failed starting: %d\n", ret);
-- return;
-- }
--}
-+ /* setup COMPARE clockevent */
-+ comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
-+ comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
-+ comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
-
--static struct sysdev_class timer_class = {
-- .name = "timer",
--};
-+ sysreg_write(COMPARE, 0);
-+ timer_irqaction.dev_id = &comparator;
-
--static struct sys_device timer_device = {
-- .id = 0,
-- .cls = &timer_class,
--};
-+ ret = setup_irq(0, &timer_irqaction);
-+ if (ret)
-+ pr_debug("timer: could not request IRQ 0: %d\n", ret);
-+ else {
-+ clockevents_register_device(&comparator);
-
--static int __init init_timer_sysfs(void)
--{
-- int err = sysdev_class_register(&timer_class);
-- if (!err)
-- err = sysdev_register(&timer_device);
-- return err;
-+ pr_info("%s: irq 0, %lu.%03lu MHz\n", comparator.name,
-+ ((counter_hz + 500) / 1000) / 1000,
-+ ((counter_hz + 500) / 1000) % 1000);
-+ }
- }
--
--device_initcall(init_timer_sysfs);
---- a/arch/avr32/kernel/vmlinux.lds.S
-+++ b/arch/avr32/kernel/vmlinux.lds.S
-@@ -68,14 +68,6 @@ SECTIONS
- _evba = .;
- _text = .;
- *(.ex.text)
-- . = 0x50;
-- *(.tlbx.ex.text)
-- . = 0x60;
-- *(.tlbr.ex.text)
-- . = 0x70;
-- *(.tlbw.ex.text)
-- . = 0x100;
-- *(.scall.text)
- *(.irq.text)
- KPROBES_TEXT
- TEXT_TEXT
-@@ -107,6 +99,10 @@ SECTIONS
- */
- *(.data.init_task)
-
-+ /* Then, the page-aligned data */
-+ . = ALIGN(PAGE_SIZE);
-+ *(.data.page_aligned)
-+
- /* Then, the cacheline aligned data */
- . = ALIGN(L1_CACHE_BYTES);
- *(.data.cacheline_aligned)
---- a/arch/avr32/lib/io-readsb.S
-+++ b/arch/avr32/lib/io-readsb.S
-@@ -41,7 +41,7 @@ __raw_readsb:
- 2: sub r10, -4
- reteq r12
-
--3: ld.uh r8, r12[0]
-+3: ld.ub r8, r12[0]
- sub r10, 1
- st.b r11++, r8
- brne 3b
---- a/arch/avr32/mach-at32ap/Kconfig
-+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -26,6 +26,13 @@ config AP700X_8_BIT_SMC
-
- endchoice
-
-+config GPIO_DEV
-+ bool "GPIO /dev interface"
-+ select CONFIGFS_FS
-+ default n
-+ help
-+ Say `Y' to enable a /dev interface to the GPIO pins.
-+
- endmenu
-
- endif # PLATFORM_AT32AP
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -1,4 +1,9 @@
--obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
--obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o
--obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o
-+obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o
-+obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
- obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
-+obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
-+obj-$(CONFIG_PM) += pm.o
-+
-+ifeq ($(CONFIG_PM_DEBUG),y)
-+CFLAGS_pm.o += -DDEBUG
-+endif
---- a/arch/avr32/mach-at32ap/at32ap.c
-+++ /dev/null
-@@ -1,56 +0,0 @@
--/*
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/clk.h>
--#include <linux/err.h>
--#include <linux/init.h>
--#include <linux/platform_device.h>
--
--#include <asm/arch/init.h>
--
--void __init setup_platform(void)
--{
-- at32_clock_init();
-- at32_portmux_init();
--}
--
--static int __init pdc_probe(struct platform_device *pdev)
--{
-- struct clk *pclk, *hclk;
--
-- pclk = clk_get(&pdev->dev, "pclk");
-- if (IS_ERR(pclk)) {
-- dev_err(&pdev->dev, "no pclk defined\n");
-- return PTR_ERR(pclk);
-- }
-- hclk = clk_get(&pdev->dev, "hclk");
-- if (IS_ERR(hclk)) {
-- dev_err(&pdev->dev, "no hclk defined\n");
-- clk_put(pclk);
-- return PTR_ERR(hclk);
-- }
--
-- clk_enable(pclk);
-- clk_enable(hclk);
--
-- dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
-- return 0;
--}
--
--static struct platform_driver pdc_driver = {
-- .probe = pdc_probe,
-- .driver = {
-- .name = "pdc",
-- },
--};
--
--static int __init pdc_init(void)
--{
-- return platform_driver_register(&pdc_driver);
--}
--arch_initcall(pdc_init);
---- a/arch/avr32/mach-at32ap/at32ap700x.c
-+++ b/arch/avr32/mach-at32ap/at32ap700x.c
-@@ -6,11 +6,13 @@
- * published by the Free Software Foundation.
- */
- #include <linux/clk.h>
-+#include <linux/delay.h>
- #include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/dma-mapping.h>
- #include <linux/spi/spi.h>
-+#include <linux/usb/atmel_usba_udc.h>
-
- #include <asm/io.h>
- #include <asm/irq.h>
-@@ -18,6 +20,7 @@
- #include <asm/arch/at32ap700x.h>
- #include <asm/arch/board.h>
- #include <asm/arch/portmux.h>
-+#include <asm/arch/sram.h>
-
- #include <video/atmel_lcdc.h>
-
-@@ -91,25 +94,18 @@ static struct clk devname##_##_name = {
-
- static DEFINE_SPINLOCK(pm_lock);
-
--unsigned long at32ap7000_osc_rates[3] = {
-- [0] = 32768,
-- /* FIXME: these are ATSTK1002-specific */
-- [1] = 20000000,
-- [2] = 12000000,
--};
-+static struct clk osc0;
-+static struct clk osc1;
-
- static unsigned long osc_get_rate(struct clk *clk)
- {
-- return at32ap7000_osc_rates[clk->index];
-+ return at32_board_osc_rates[clk->index];
- }
-
- static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
- {
- unsigned long div, mul, rate;
-
-- if (!(control & PM_BIT(PLLEN)))
-- return 0;
--
- div = PM_BFEXT(PLLDIV, control) + 1;
- mul = PM_BFEXT(PLLMUL, control) + 1;
-
-@@ -120,6 +116,71 @@ static unsigned long pll_get_rate(struct
- return rate;
- }
-
-+static long pll_set_rate(struct clk *clk, unsigned long rate,
-+ u32 *pll_ctrl)
-+{
-+ unsigned long mul;
-+ unsigned long mul_best_fit = 0;
-+ unsigned long div;
-+ unsigned long div_min;
-+ unsigned long div_max;
-+ unsigned long div_best_fit = 0;
-+ unsigned long base;
-+ unsigned long pll_in;
-+ unsigned long actual = 0;
-+ unsigned long rate_error;
-+ unsigned long rate_error_prev = ~0UL;
-+ u32 ctrl;
-+
-+ /* Rate must be between 80 MHz and 200 Mhz. */
-+ if (rate < 80000000UL || rate > 200000000UL)
-+ return -EINVAL;
-+
-+ ctrl = PM_BF(PLLOPT, 4);
-+ base = clk->parent->get_rate(clk->parent);
-+
-+ /* PLL input frequency must be between 6 MHz and 32 MHz. */
-+ div_min = DIV_ROUND_UP(base, 32000000UL);
-+ div_max = base / 6000000UL;
-+
-+ if (div_max < div_min)
-+ return -EINVAL;
-+
-+ for (div = div_min; div <= div_max; div++) {
-+ pll_in = (base + div / 2) / div;
-+ mul = (rate + pll_in / 2) / pll_in;
-+
-+ if (mul == 0)
-+ continue;
-+
-+ actual = pll_in * mul;
-+ rate_error = abs(actual - rate);
-+
-+ if (rate_error < rate_error_prev) {
-+ mul_best_fit = mul;
-+ div_best_fit = div;
-+ rate_error_prev = rate_error;
-+ }
-+
-+ if (rate_error == 0)
-+ break;
-+ }
-+
-+ if (div_best_fit == 0)
-+ return -EINVAL;
-+
-+ ctrl |= PM_BF(PLLMUL, mul_best_fit - 1);
-+ ctrl |= PM_BF(PLLDIV, div_best_fit - 1);
-+ ctrl |= PM_BF(PLLCOUNT, 16);
-+
-+ if (clk->parent == &osc1)
-+ ctrl |= PM_BIT(PLLOSC);
-+
-+ *pll_ctrl = ctrl;
-+
-+ return actual;
-+}
-+
- static unsigned long pll0_get_rate(struct clk *clk)
- {
- u32 control;
-@@ -129,6 +190,41 @@ static unsigned long pll0_get_rate(struc
- return pll_get_rate(clk, control);
- }
-
-+static void pll1_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long timeout;
-+ u32 status;
-+ u32 ctrl;
-+
-+ ctrl = pm_readl(PLL1);
-+
-+ if (enabled) {
-+ if (!PM_BFEXT(PLLMUL, ctrl) && !PM_BFEXT(PLLDIV, ctrl)) {
-+ pr_debug("clk %s: failed to enable, rate not set\n",
-+ clk->name);
-+ return;
-+ }
-+
-+ ctrl |= PM_BIT(PLLEN);
-+ pm_writel(PLL1, ctrl);
-+
-+ /* Wait for PLL lock. */
-+ for (timeout = 10000; timeout; timeout--) {
-+ status = pm_readl(ISR);
-+ if (status & PM_BIT(LOCK1))
-+ break;
-+ udelay(10);
-+ }
-+
-+ if (!(status & PM_BIT(LOCK1)))
-+ printk(KERN_ERR "clk %s: timeout waiting for lock\n",
-+ clk->name);
-+ } else {
-+ ctrl &= ~PM_BIT(PLLEN);
-+ pm_writel(PLL1, ctrl);
-+ }
-+}
-+
- static unsigned long pll1_get_rate(struct clk *clk)
- {
- u32 control;
-@@ -138,6 +234,49 @@ static unsigned long pll1_get_rate(struc
- return pll_get_rate(clk, control);
- }
-
-+static long pll1_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+ u32 ctrl = 0;
-+ unsigned long actual_rate;
-+
-+ actual_rate = pll_set_rate(clk, rate, &ctrl);
-+
-+ if (apply) {
-+ if (actual_rate != rate)
-+ return -EINVAL;
-+ if (clk->users > 0)
-+ return -EBUSY;
-+ pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual_rate);
-+ pm_writel(PLL1, ctrl);
-+ }
-+
-+ return actual_rate;
-+}
-+
-+static int pll1_set_parent(struct clk *clk, struct clk *parent)
-+{
-+ u32 ctrl;
-+
-+ if (clk->users > 0)
-+ return -EBUSY;
-+
-+ ctrl = pm_readl(PLL1);
-+ WARN_ON(ctrl & PM_BIT(PLLEN));
-+
-+ if (parent == &osc0)
-+ ctrl &= ~PM_BIT(PLLOSC);
-+ else if (parent == &osc1)
-+ ctrl |= PM_BIT(PLLOSC);
-+ else
-+ return -EINVAL;
-+
-+ pm_writel(PLL1, ctrl);
-+ clk->parent = parent;
-+
-+ return 0;
-+}
-+
- /*
- * The AT32AP7000 has five primary clock sources: One 32kHz
- * oscillator, two crystal oscillators and two PLLs.
-@@ -166,7 +305,10 @@ static struct clk pll0 = {
- };
- static struct clk pll1 = {
- .name = "pll1",
-+ .mode = pll1_mode,
- .get_rate = pll1_get_rate,
-+ .set_rate = pll1_set_rate,
-+ .set_parent = pll1_set_parent,
- .parent = &osc0,
- };
-
-@@ -534,6 +676,14 @@ static struct clk hramc_clk = {
- .users = 1,
- .index = 3,
- };
-+static struct clk sdramc_clk = {
-+ .name = "sdramc_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .users = 1,
-+ .index = 14,
-+};
-
- static struct resource smc0_resource[] = {
- PBMEM(0xfff03400),
-@@ -605,19 +755,32 @@ static inline void set_ebi_sfr_bits(u32
- }
-
- /* --------------------------------------------------------------------
-- * System Timer/Counter (TC)
-+ * Timer/Counter (TC)
- * -------------------------------------------------------------------- */
--static struct resource at32_systc0_resource[] = {
-+
-+static struct resource at32_tcb0_resource[] = {
- PBMEM(0xfff00c00),
- IRQ(22),
- };
--struct platform_device at32_systc0_device = {
-- .name = "systc",
-+static struct platform_device at32_tcb0_device = {
-+ .name = "atmel_tcb",
- .id = 0,
-- .resource = at32_systc0_resource,
-- .num_resources = ARRAY_SIZE(at32_systc0_resource),
-+ .resource = at32_tcb0_resource,
-+ .num_resources = ARRAY_SIZE(at32_tcb0_resource),
-+};
-+DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
-+
-+static struct resource at32_tcb1_resource[] = {
-+ PBMEM(0xfff01000),
-+ IRQ(23),
-+};
-+static struct platform_device at32_tcb1_device = {
-+ .name = "atmel_tcb",
-+ .id = 1,
-+ .resource = at32_tcb1_resource,
-+ .num_resources = ARRAY_SIZE(at32_tcb1_resource),
- };
--DEV_CLK(pclk, at32_systc0, pbb, 3);
-+DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
-
- /* --------------------------------------------------------------------
- * PIO
-@@ -669,7 +832,8 @@ void __init at32_add_system_devices(void
- platform_device_register(&pdc_device);
- platform_device_register(&dmaca0_device);
-
-- platform_device_register(&at32_systc0_device);
-+ platform_device_register(&at32_tcb0_device);
-+ platform_device_register(&at32_tcb1_device);
-
- platform_device_register(&pio0_device);
- platform_device_register(&pio1_device);
-@@ -679,6 +843,81 @@ void __init at32_add_system_devices(void
- }
-
- /* --------------------------------------------------------------------
-+ * PSIF
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_psif0_resource[] __initdata = {
-+ {
-+ .start = 0xffe03c00,
-+ .end = 0xffe03cff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(18),
-+};
-+static struct clk atmel_psif0_pclk = {
-+ .name = "pclk",
-+ .parent = &pba_clk,
-+ .mode = pba_clk_mode,
-+ .get_rate = pba_clk_get_rate,
-+ .index = 15,
-+};
-+
-+static struct resource atmel_psif1_resource[] __initdata = {
-+ {
-+ .start = 0xffe03d00,
-+ .end = 0xffe03dff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(18),
-+};
-+static struct clk atmel_psif1_pclk = {
-+ .name = "pclk",
-+ .parent = &pba_clk,
-+ .mode = pba_clk_mode,
-+ .get_rate = pba_clk_get_rate,
-+ .index = 15,
-+};
-+
-+struct platform_device *__init at32_add_device_psif(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ if (!(id == 0 || id == 1))
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_psif", id);
-+ if (!pdev)
-+ return NULL;
-+
-+ switch (id) {
-+ case 0:
-+ if (platform_device_add_resources(pdev, atmel_psif0_resource,
-+ ARRAY_SIZE(atmel_psif0_resource)))
-+ goto err_add_resources;
-+ atmel_psif0_pclk.dev = &pdev->dev;
-+ select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
-+ select_peripheral(PA(9), PERIPH_A, 0); /* DATA */
-+ break;
-+ case 1:
-+ if (platform_device_add_resources(pdev, atmel_psif1_resource,
-+ ARRAY_SIZE(atmel_psif1_resource)))
-+ goto err_add_resources;
-+ atmel_psif1_pclk.dev = &pdev->dev;
-+ select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
-+ select_peripheral(PB(12), PERIPH_A, 0); /* DATA */
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+err_add_resources:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
- * USART
- * -------------------------------------------------------------------- */
-
-@@ -951,7 +1190,8 @@ at32_add_device_spi(unsigned int id, str
- switch (id) {
- case 0:
- pdev = &atmel_spi0_device;
-- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
-+ /* pullup MISO so a level is always defined */
-+ select_peripheral(PA(0), PERIPH_A, AT32_GPIOF_PULLUP);
- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
- at32_spi_setup_slaves(0, b, n, spi0_pins);
-@@ -959,7 +1199,8 @@ at32_add_device_spi(unsigned int id, str
-
- case 1:
- pdev = &atmel_spi1_device;
-- select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
-+ /* pullup MISO so a level is always defined */
-+ select_peripheral(PB(0), PERIPH_B, AT32_GPIOF_PULLUP);
- select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
- select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
- at32_spi_setup_slaves(1, b, n, spi1_pins);
-@@ -989,7 +1230,9 @@ static struct clk atmel_twi0_pclk = {
- .index = 2,
- };
-
--struct platform_device *__init at32_add_device_twi(unsigned int id)
-+struct platform_device *__init at32_add_device_twi(unsigned int id,
-+ struct i2c_board_info *b,
-+ unsigned int n)
- {
- struct platform_device *pdev;
-
-@@ -1009,6 +1252,9 @@ struct platform_device *__init at32_add_
-
- atmel_twi0_pclk.dev = &pdev->dev;
-
-+ if (b)
-+ i2c_register_board_info(id, b, n);
-+
- platform_device_add(pdev);
- return pdev;
-
-@@ -1032,7 +1278,8 @@ static struct clk atmel_mci0_pclk = {
- .index = 9,
- };
-
--struct platform_device *__init at32_add_device_mci(unsigned int id)
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
- {
- struct platform_device *pdev;
-
-@@ -1041,11 +1288,15 @@ struct platform_device *__init at32_add_
-
- pdev = platform_device_alloc("atmel_mci", id);
- if (!pdev)
-- return NULL;
-+ goto fail;
-
- if (platform_device_add_resources(pdev, atmel_mci0_resource,
- ARRAY_SIZE(atmel_mci0_resource)))
-- goto err_add_resources;
-+ goto fail;
-+
-+ if (data && platform_device_add_data(pdev, data,
-+ sizeof(struct mci_platform_data)))
-+ goto fail;
-
- select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
-@@ -1054,12 +1305,19 @@ struct platform_device *__init at32_add_
- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
-
-+ if (data) {
-+ if (data->detect_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->detect_pin, 0);
-+ if (data->wp_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->wp_pin, 0);
-+ }
-+
- atmel_mci0_pclk.dev = &pdev->dev;
-
- platform_device_add(pdev);
- return pdev;
-
--err_add_resources:
-+fail:
- platform_device_put(pdev);
- return NULL;
- }
-@@ -1097,7 +1355,8 @@ static struct clk atmel_lcdfb0_pixclk =
-
- struct platform_device *__init
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-- unsigned long fbmem_start, unsigned long fbmem_len)
-+ unsigned long fbmem_start, unsigned long fbmem_len,
-+ unsigned int pin_config)
- {
- struct platform_device *pdev;
- struct atmel_lcdfb_info *info;
-@@ -1124,37 +1383,77 @@ at32_add_device_lcdc(unsigned int id, st
- switch (id) {
- case 0:
- pdev = &atmel_lcdfb0_device;
-- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
-- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
-- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
-- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
-- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
-- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
-- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
-- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
-- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
-- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
-- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
-- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
-- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
-- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
-- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
-- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
-- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
-- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
-- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
-- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
-- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
-- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
-- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
-- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
-- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
-- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
-- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
-- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
-- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
-- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
-- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
-+
-+ switch (pin_config) {
-+ case 0:
-+ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
-+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
-+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
-+ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
-+ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
-+ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
-+ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
-+ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
-+ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
-+ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
-+ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
-+ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
-+ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
-+ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
-+ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
-+ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
-+ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
-+ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
-+ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
-+ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
-+ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
-+ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
-+ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
-+ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
-+ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
-+ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
-+ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
-+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
-+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
-+ break;
-+ case 1:
-+ select_peripheral(PE(0), PERIPH_B, 0); /* CC */
-+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
-+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
-+ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
-+ select_peripheral(PE(1), PERIPH_B, 0); /* DVAL */
-+ select_peripheral(PE(2), PERIPH_B, 0); /* MODE */
-+ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
-+ select_peripheral(PE(3), PERIPH_B, 0); /* DATA0 */
-+ select_peripheral(PE(4), PERIPH_B, 0); /* DATA1 */
-+ select_peripheral(PE(5), PERIPH_B, 0); /* DATA2 */
-+ select_peripheral(PE(6), PERIPH_B, 0); /* DATA3 */
-+ select_peripheral(PE(7), PERIPH_B, 0); /* DATA4 */
-+ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
-+ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
-+ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
-+ select_peripheral(PE(8), PERIPH_B, 0); /* DATA8 */
-+ select_peripheral(PE(9), PERIPH_B, 0); /* DATA9 */
-+ select_peripheral(PE(10), PERIPH_B, 0); /* DATA10 */
-+ select_peripheral(PE(11), PERIPH_B, 0); /* DATA11 */
-+ select_peripheral(PE(12), PERIPH_B, 0); /* DATA12 */
-+ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
-+ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
-+ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
-+ select_peripheral(PE(13), PERIPH_B, 0); /* DATA16 */
-+ select_peripheral(PE(14), PERIPH_B, 0); /* DATA17 */
-+ select_peripheral(PE(15), PERIPH_B, 0); /* DATA18 */
-+ select_peripheral(PE(16), PERIPH_B, 0); /* DATA19 */
-+ select_peripheral(PE(17), PERIPH_B, 0); /* DATA20 */
-+ select_peripheral(PE(18), PERIPH_B, 0); /* DATA21 */
-+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
-+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
-+ break;
-+ default:
-+ goto err_invalid_id;
-+ }
-
- clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
- clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-@@ -1351,9 +1650,39 @@ static struct clk usba0_hclk = {
- .index = 6,
- };
-
-+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
-+ [idx] = { \
-+ .name = nam, \
-+ .index = idx, \
-+ .fifo_size = maxpkt, \
-+ .nr_banks = maxbk, \
-+ .can_dma = dma, \
-+ .can_isoc = isoc, \
-+ }
-+
-+static struct usba_ep_data at32_usba_ep[] __initdata = {
-+ EP("ep0", 0, 64, 1, 0, 0),
-+ EP("ep1", 1, 512, 2, 1, 1),
-+ EP("ep2", 2, 512, 2, 1, 1),
-+ EP("ep3-int", 3, 64, 3, 1, 0),
-+ EP("ep4-int", 4, 64, 3, 1, 0),
-+ EP("ep5", 5, 1024, 3, 1, 1),
-+ EP("ep6", 6, 1024, 3, 1, 1),
-+};
-+
-+#undef EP
-+
- struct platform_device *__init
- at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
- {
-+ /*
-+ * pdata doesn't have room for any endpoints, so we need to
-+ * append room for the ones we need right after it.
-+ */
-+ struct {
-+ struct usba_platform_data pdata;
-+ struct usba_ep_data ep[7];
-+ } usba_data;
- struct platform_device *pdev;
-
- if (id != 0)
-@@ -1367,13 +1696,20 @@ at32_add_device_usba(unsigned int id, st
- ARRAY_SIZE(usba0_resource)))
- goto out_free_pdev;
-
-- if (data) {
-- if (platform_device_add_data(pdev, data, sizeof(*data)))
-- goto out_free_pdev;
-+ if (data)
-+ usba_data.pdata.vbus_pin = data->vbus_pin;
-+ else
-+ usba_data.pdata.vbus_pin = -EINVAL;
-
-- if (data->vbus_pin != GPIO_PIN_NONE)
-- at32_select_gpio(data->vbus_pin, 0);
-- }
-+ data = &usba_data.pdata;
-+ data->num_ep = ARRAY_SIZE(at32_usba_ep);
-+ memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
-+
-+ if (platform_device_add_data(pdev, data, sizeof(usba_data)))
-+ goto out_free_pdev;
-+
-+ if (data->vbus_pin >= 0)
-+ at32_select_gpio(data->vbus_pin, 0);
-
- usba0_pclk.dev = &pdev->dev;
- usba0_hclk.dev = &pdev->dev;
-@@ -1526,6 +1862,58 @@ fail:
- #endif
-
- /* --------------------------------------------------------------------
-+ * NAND Flash / SmartMedia
-+ * -------------------------------------------------------------------- */
-+static struct resource smc_cs3_resource[] __initdata = {
-+ {
-+ .start = 0x0c000000,
-+ .end = 0x0fffffff,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .start = 0xfff03c00,
-+ .end = 0xfff03fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+struct platform_device *__init
-+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0 || !data)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_nand", id);
-+ if (!pdev)
-+ goto fail;
-+
-+ if (platform_device_add_resources(pdev, smc_cs3_resource,
-+ ARRAY_SIZE(smc_cs3_resource)))
-+ goto fail;
-+
-+ if (platform_device_add_data(pdev, data,
-+ sizeof(struct atmel_nand_data)))
-+ goto fail;
-+
-+ set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
-+ if (data->enable_pin)
-+ at32_select_gpio(data->enable_pin,
-+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-+ if (data->rdy_pin)
-+ at32_select_gpio(data->rdy_pin, 0);
-+ if (data->det_pin)
-+ at32_select_gpio(data->det_pin, 0);
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+fail:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
- * AC97C
- * -------------------------------------------------------------------- */
- static struct resource atmel_ac97c0_resource[] __initdata = {
-@@ -1540,9 +1928,11 @@ static struct clk atmel_ac97c0_pclk = {
- .index = 10,
- };
-
--struct platform_device *__init at32_add_device_ac97c(unsigned int id)
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
- {
- struct platform_device *pdev;
-+ struct ac97c_platform_data _data;
-
- if (id != 0)
- return NULL;
-@@ -1553,19 +1943,37 @@ struct platform_device *__init at32_add_
-
- if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
- ARRAY_SIZE(atmel_ac97c0_resource)))
-- goto err_add_resources;
-+ goto fail;
-
-- select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
-- select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
-- select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
-- select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
-+ if (!data) {
-+ data = &_data;
-+ memset(data, 0, sizeof(struct ac97c_platform_data));
-+ data->reset_pin = GPIO_PIN_NONE;
-+ }
-+
-+ data->dma_rx_periph_id = 3;
-+ data->dma_tx_periph_id = 4;
-+ data->dma_controller_id = 0;
-+
-+ if (platform_device_add_data(pdev, data,
-+ sizeof(struct ac97c_platform_data)))
-+ goto fail;
-+
-+ select_peripheral(PB(20), PERIPH_B, 0); /* SDO */
-+ select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */
-+ select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */
-+ select_peripheral(PB(23), PERIPH_B, 0); /* SDI */
-+
-+ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
-+ if (data->reset_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->reset_pin, 0);
-
- atmel_ac97c0_pclk.dev = &pdev->dev;
-
- platform_device_add(pdev);
- return pdev;
-
--err_add_resources:
-+fail:
- platform_device_put(pdev);
- return NULL;
- }
-@@ -1683,6 +2091,7 @@ struct clk *at32_clock_list[] = {
- &hmatrix_clk,
- &ebi_clk,
- &hramc_clk,
-+ &sdramc_clk,
- &smc0_pclk,
- &smc0_mck,
- &pdc_hclk,
-@@ -1694,7 +2103,10 @@ struct clk *at32_clock_list[] = {
- &pio2_mck,
- &pio3_mck,
- &pio4_mck,
-- &at32_systc0_pclk,
-+ &at32_tcb0_t0_clk,
-+ &at32_tcb1_t0_clk,
-+ &atmel_psif0_pclk,
-+ &atmel_psif1_pclk,
- &atmel_usart0_usart,
- &atmel_usart1_usart,
- &atmel_usart2_usart,
-@@ -1730,16 +2142,7 @@ struct clk *at32_clock_list[] = {
- };
- unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
-
--void __init at32_portmux_init(void)
--{
-- at32_init_pio(&pio0_device);
-- at32_init_pio(&pio1_device);
-- at32_init_pio(&pio2_device);
-- at32_init_pio(&pio3_device);
-- at32_init_pio(&pio4_device);
--}
--
--void __init at32_clock_init(void)
-+void __init setup_platform(void)
- {
- u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
- int i;
-@@ -1794,4 +2197,36 @@ void __init at32_clock_init(void)
- pm_writel(HSB_MASK, hsb_mask);
- pm_writel(PBA_MASK, pba_mask);
- pm_writel(PBB_MASK, pbb_mask);
-+
-+ /* Initialize the port muxes */
-+ at32_init_pio(&pio0_device);
-+ at32_init_pio(&pio1_device);
-+ at32_init_pio(&pio2_device);
-+ at32_init_pio(&pio3_device);
-+ at32_init_pio(&pio4_device);
-+}
-+
-+struct gen_pool *sram_pool;
-+
-+static int __init sram_init(void)
-+{
-+ struct gen_pool *pool;
-+
-+ /* 1KiB granularity */
-+ pool = gen_pool_create(10, -1);
-+ if (!pool)
-+ goto fail;
-+
-+ if (gen_pool_add(pool, 0x24000000, 0x8000, -1))
-+ goto err_pool_add;
-+
-+ sram_pool = pool;
-+ return 0;
-+
-+err_pool_add:
-+ gen_pool_destroy(pool);
-+fail:
-+ pr_err("Failed to create SRAM pool\n");
-+ return -ENOMEM;
- }
-+core_initcall(sram_init);
---- a/arch/avr32/mach-at32ap/cpufreq.c
-+++ b/arch/avr32/mach-at32ap/cpufreq.c
-@@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void
- {
- return cpufreq_register_driver(&at32_driver);
- }
--
--arch_initcall(at32_cpufreq_init);
-+late_initcall(at32_cpufreq_init);
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/gpio-dev.c
-@@ -0,0 +1,573 @@
-+/*
-+ * GPIO /dev and configfs interface
-+ *
-+ * Copyright (C) 2006-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/configfs.h>
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/poll.h>
-+#include <linux/uaccess.h>
-+#include <linux/wait.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/arch/portmux.h>
-+
-+#define GPIO_DEV_MAX 8
-+
-+static struct class *gpio_dev_class;
-+static dev_t gpio_devt;
-+
-+struct gpio_item {
-+ spinlock_t lock;
-+
-+ int enabled;
-+ int initialized;
-+ int port;
-+ u32 pin_mask;
-+ u32 oe_mask;
-+
-+ /* Pin state last time we read it (for blocking reads) */
-+ u32 pin_state;
-+ int changed;
-+
-+ wait_queue_head_t change_wq;
-+ struct fasync_struct *async_queue;
-+
-+ int id;
-+ struct class_device *gpio_dev;
-+ struct cdev char_dev;
-+ struct config_item item;
-+};
-+
-+struct gpio_attribute {
-+ struct configfs_attribute attr;
-+ ssize_t (*show)(struct gpio_item *, char *);
-+ ssize_t (*store)(struct gpio_item *, const char *, size_t);
-+};
-+
-+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
-+{
-+ struct gpio_item *gpio = dev_id;
-+ u32 old_state, new_state;
-+
-+ old_state = gpio->pin_state;
-+ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+ gpio->pin_state = new_state;
-+
-+ if (new_state != old_state) {
-+ gpio->changed = 1;
-+ wake_up_interruptible(&gpio->change_wq);
-+
-+ if (gpio->async_queue)
-+ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int gpio_dev_open(struct inode *inode, struct file *file)
-+{
-+ struct gpio_item *gpio = container_of(inode->i_cdev,
-+ struct gpio_item,
-+ char_dev);
-+ unsigned int irq;
-+ unsigned int i;
-+ int ret;
-+
-+ nonseekable_open(inode, file);
-+ config_item_get(&gpio->item);
-+ file->private_data = gpio;
-+
-+ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
-+ gpio->pin_mask);
-+ gpio->changed = 1;
-+
-+ for (i = 0; i < 32; i++) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ ret = request_irq(irq, gpio_dev_interrupt, 0,
-+ "gpio-dev", gpio);
-+ if (ret)
-+ goto err_irq;
-+ }
-+ }
-+
-+ return 0;
-+
-+err_irq:
-+ while (i--) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ free_irq(irq, gpio);
-+ }
-+ }
-+
-+ config_item_put(&gpio->item);
-+
-+ return ret;
-+}
-+
-+static int gpio_dev_fasync(int fd, struct file *file, int mode)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+
-+ return fasync_helper(fd, file, mode, &gpio->async_queue);
-+}
-+
-+static int gpio_dev_release(struct inode *inode, struct file *file)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ unsigned int irq;
-+ unsigned int i;
-+
-+ gpio_dev_fasync(-1, file, 0);
-+
-+ for (i = 0; i < 32; i++) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ free_irq(irq, gpio);
-+ }
-+ }
-+
-+ config_item_put(&gpio->item);
-+
-+ return 0;
-+}
-+
-+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ unsigned int mask = 0;
-+
-+ poll_wait(file, &gpio->change_wq, wait);
-+ if (gpio->changed)
-+ mask |= POLLIN | POLLRDNORM;
-+
-+ return mask;
-+}
-+
-+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
-+ size_t count, loff_t *offset)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ u32 value;
-+
-+ spin_lock_irq(&gpio->lock);
-+ while (!gpio->changed) {
-+ spin_unlock_irq(&gpio->lock);
-+
-+ if (file->f_flags & O_NONBLOCK)
-+ return -EAGAIN;
-+
-+ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
-+ return -ERESTARTSYS;
-+
-+ spin_lock_irq(&gpio->lock);
-+ }
-+
-+ gpio->changed = 0;
-+ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+
-+ spin_unlock_irq(&gpio->lock);
-+
-+ count = min(count, (size_t)4);
-+ if (copy_to_user(buf, &value, count))
-+ return -EFAULT;
-+
-+ return count;
-+}
-+
-+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
-+ size_t count, loff_t *offset)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ u32 value = 0;
-+ u32 mask = ~0UL;
-+
-+ count = min(count, (size_t)4);
-+ if (copy_from_user(&value, buf, count))
-+ return -EFAULT;
-+
-+ /* Assuming big endian */
-+ mask <<= (4 - count) * 8;
-+ mask &= gpio->pin_mask;
-+
-+ at32_gpio_set_value_multiple(gpio->port, value, mask);
-+
-+ return count;
-+}
-+
-+static struct file_operations gpio_dev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .open = gpio_dev_open,
-+ .release = gpio_dev_release,
-+ .fasync = gpio_dev_fasync,
-+ .poll = gpio_dev_poll,
-+ .read = gpio_dev_read,
-+ .write = gpio_dev_write,
-+};
-+
-+static struct gpio_item *to_gpio_item(struct config_item *item)
-+{
-+ return item ? container_of(item, struct gpio_item, item) : NULL;
-+}
-+
-+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "%d\n", gpio->port);
-+}
-+
-+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ unsigned long id;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
-+
-+ id = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ /* Switching PIO is not allowed when live... */
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ ret = -ENXIO;
-+ if (at32_gpio_port_is_valid(id)) {
-+ gpio->port = id;
-+ ret = count;
-+ }
-+ }
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "0x%08x\n", gpio->pin_mask);
-+}
-+
-+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ u32 new_mask;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
-+
-+ new_mask = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ /* Can't update the pin mask while live. */
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ gpio->oe_mask &= new_mask;
-+ gpio->pin_mask = new_mask;
-+ ret = count;
-+ }
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "0x%08x\n", gpio->oe_mask);
-+}
-+
-+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ u32 mask;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
-+
-+ mask = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ gpio->oe_mask = mask & gpio->pin_mask;
-+ ret = count;
-+ }
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "%d\n", gpio->enabled);
-+}
-+
-+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ char *p = (char *)page;
-+ int enabled;
-+ int ret;
-+
-+ enabled = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ /* make it a boolean value */
-+ enabled = !!enabled;
-+
-+ if (gpio->enabled == enabled)
-+ /* No change; do nothing. */
-+ return count;
-+
-+ BUG_ON(gpio->id >= GPIO_DEV_MAX);
-+
-+ if (!enabled) {
-+ class_device_unregister(gpio->gpio_dev);
-+ cdev_del(&gpio->char_dev);
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+ } else {
-+ if (gpio->port < 0 || !gpio->pin_mask)
-+ return -ENODEV;
-+ }
-+
-+ /* Disallow any updates to gpio_id or pin_mask */
-+ spin_lock(&gpio->lock);
-+ gpio->enabled = enabled;
-+ spin_unlock(&gpio->lock);
-+
-+ if (!enabled)
-+ return count;
-+
-+ /* Now, try to allocate the pins */
-+ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
-+ if (ret)
-+ goto err_alloc_pins;
-+
-+ gpio->initialized = 1;
-+
-+ cdev_init(&gpio->char_dev, &gpio_dev_fops);
-+ gpio->char_dev.owner = THIS_MODULE;
-+ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
-+ if (ret < 0)
-+ goto err_cdev_add;
-+ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
-+ MKDEV(MAJOR(gpio_devt), gpio->id),
-+ NULL,
-+ "gpio%d", gpio->id);
-+ if (IS_ERR(gpio->gpio_dev)) {
-+ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
-+ ret = PTR_ERR(gpio->gpio_dev);
-+ goto err_class_dev;
-+ }
-+
-+ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
-+ gpio->id, gpio->port, gpio->pin_mask,
-+ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
-+
-+ return 0;
-+
-+err_class_dev:
-+ cdev_del(&gpio->char_dev);
-+err_cdev_add:
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+err_alloc_pins:
-+ spin_lock(&gpio->lock);
-+ gpio->enabled = 0;
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static struct gpio_attribute gpio_item_attr_gpio_id = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "gpio_id",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_gpio_id,
-+ .store = gpio_store_gpio_id,
-+};
-+static struct gpio_attribute gpio_item_attr_pin_mask = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "pin_mask",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_pin_mask,
-+ .store = gpio_store_pin_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_oe_mask = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "oe_mask",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_oe_mask,
-+ .store = gpio_store_oe_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_enabled = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "enabled",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_enabled,
-+ .store = gpio_store_enabled,
-+};
-+
-+static struct configfs_attribute *gpio_item_attrs[] = {
-+ &gpio_item_attr_gpio_id.attr,
-+ &gpio_item_attr_pin_mask.attr,
-+ &gpio_item_attr_oe_mask.attr,
-+ &gpio_item_attr_enabled.attr,
-+ NULL,
-+};
-+
-+static ssize_t gpio_show_attr(struct config_item *item,
-+ struct configfs_attribute *attr,
-+ char *page)
-+{
-+ struct gpio_item *gpio_item = to_gpio_item(item);
-+ struct gpio_attribute *gpio_attr
-+ = container_of(attr, struct gpio_attribute, attr);
-+ ssize_t ret = 0;
-+
-+ if (gpio_attr->show)
-+ ret = gpio_attr->show(gpio_item, page);
-+ return ret;
-+}
-+
-+static ssize_t gpio_store_attr(struct config_item *item,
-+ struct configfs_attribute *attr,
-+ const char *page, size_t count)
-+{
-+ struct gpio_item *gpio_item = to_gpio_item(item);
-+ struct gpio_attribute *gpio_attr
-+ = container_of(attr, struct gpio_attribute, attr);
-+ ssize_t ret = -EINVAL;
-+
-+ if (gpio_attr->store)
-+ ret = gpio_attr->store(gpio_item, page, count);
-+ return ret;
-+}
-+
-+static void gpio_release(struct config_item *item)
-+{
-+ kfree(to_gpio_item(item));
-+}
-+
-+static struct configfs_item_operations gpio_item_ops = {
-+ .release = gpio_release,
-+ .show_attribute = gpio_show_attr,
-+ .store_attribute = gpio_store_attr,
-+};
-+
-+static struct config_item_type gpio_item_type = {
-+ .ct_item_ops = &gpio_item_ops,
-+ .ct_attrs = gpio_item_attrs,
-+ .ct_owner = THIS_MODULE,
-+};
-+
-+static struct config_item *gpio_make_item(struct config_group *group,
-+ const char *name)
-+{
-+ static int next_id;
-+ struct gpio_item *gpio;
-+
-+ if (next_id >= GPIO_DEV_MAX)
-+ return NULL;
-+
-+ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
-+ if (!gpio)
-+ return NULL;
-+
-+ gpio->id = next_id++;
-+ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
-+ spin_lock_init(&gpio->lock);
-+ init_waitqueue_head(&gpio->change_wq);
-+
-+ return &gpio->item;
-+}
-+
-+static void gpio_drop_item(struct config_group *group,
-+ struct config_item *item)
-+{
-+ struct gpio_item *gpio = to_gpio_item(item);
-+
-+ spin_lock(&gpio->lock);
-+ if (gpio->enabled) {
-+ class_device_unregister(gpio->gpio_dev);
-+ cdev_del(&gpio->char_dev);
-+ }
-+
-+ if (gpio->initialized) {
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+ gpio->enabled = 0;
-+ }
-+ spin_unlock(&gpio->lock);
-+}
-+
-+static struct configfs_group_operations gpio_group_ops = {
-+ .make_item = gpio_make_item,
-+ .drop_item = gpio_drop_item,
-+};
-+
-+static struct config_item_type gpio_group_type = {
-+ .ct_group_ops = &gpio_group_ops,
-+ .ct_owner = THIS_MODULE,
-+};
-+
-+static struct configfs_subsystem gpio_subsys = {
-+ .su_group = {
-+ .cg_item = {
-+ .ci_namebuf = "gpio",
-+ .ci_type = &gpio_group_type,
-+ },
-+ },
-+};
-+
-+static int __init gpio_dev_init(void)
-+{
-+ int err;
-+
-+ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
-+ if (IS_ERR(gpio_dev_class)) {
-+ err = PTR_ERR(gpio_dev_class);
-+ goto err_class_create;
-+ }
-+
-+ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
-+ if (err < 0)
-+ goto err_alloc_chrdev;
-+
-+ /* Configfs initialization */
-+ config_group_init(&gpio_subsys.su_group);
-+ mutex_init(&gpio_subsys.su_mutex);
-+ err = configfs_register_subsystem(&gpio_subsys);
-+ if (err)
-+ goto err_register_subsys;
-+
-+ return 0;
-+
-+err_register_subsys:
-+ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
-+err_alloc_chrdev:
-+ class_destroy(gpio_dev_class);
-+err_class_create:
-+ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
-+ return err;
-+}
-+late_initcall(gpio_dev_init);
---- a/arch/avr32/mach-at32ap/hsmc.c
-+++ b/arch/avr32/mach-at32ap/hsmc.c
-@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
- {
- return platform_driver_register(&hsmc_driver);
- }
--arch_initcall(hsmc_init);
-+core_initcall(hsmc_init);
---- a/arch/avr32/mach-at32ap/intc.c
-+++ b/arch/avr32/mach-at32ap/intc.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) 2006 Atmel Corporation
-+ * Copyright (C) 2006, 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
-@@ -12,15 +12,20 @@
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <linux/platform_device.h>
-+#include <linux/sysdev.h>
-
--#include <asm/intc.h>
- #include <asm/io.h>
-
- #include "intc.h"
-
- struct intc {
-- void __iomem *regs;
-- struct irq_chip chip;
-+ void __iomem *regs;
-+ struct irq_chip chip;
-+ struct sys_device sysdev;
-+#ifdef CONFIG_PM
-+ unsigned long suspend_ipr;
-+ unsigned long saved_ipr[64];
-+#endif
- };
-
- extern struct platform_device at32_intc0_device;
-@@ -137,6 +142,74 @@ fail:
- panic("Interrupt controller initialization failed!\n");
- }
-
-+#ifdef CONFIG_PM
-+void intc_set_suspend_handler(unsigned long offset)
-+{
-+ intc0.suspend_ipr = offset;
-+}
-+
-+static int intc_suspend(struct sys_device *sdev, pm_message_t state)
-+{
-+ struct intc *intc = container_of(sdev, struct intc, sysdev);
-+ int i;
-+
-+ if (unlikely(!irqs_disabled())) {
-+ pr_err("intc_suspend: called with interrupts enabled\n");
-+ return -EINVAL;
-+ }
-+
-+ if (unlikely(!intc->suspend_ipr)) {
-+ pr_err("intc_suspend: suspend_ipr not initialized\n");
-+ return -EINVAL;
-+ }
-+
-+ for (i = 0; i < 64; i++) {
-+ intc->saved_ipr[i] = intc_readl(intc, INTPR0 + 4 * i);
-+ intc_writel(intc, INTPR0 + 4 * i, intc->suspend_ipr);
-+ }
-+
-+ return 0;
-+}
-+
-+static int intc_resume(struct sys_device *sdev)
-+{
-+ struct intc *intc = container_of(sdev, struct intc, sysdev);
-+ int i;
-+
-+ WARN_ON(!irqs_disabled());
-+
-+ for (i = 0; i < 64; i++)
-+ intc_writel(intc, INTPR0 + 4 * i, intc->saved_ipr[i]);
-+
-+ return 0;
-+}
-+#else
-+#define intc_suspend NULL
-+#define intc_resume NULL
-+#endif
-+
-+static struct sysdev_class intc_class = {
-+ .name = "intc",
-+ .suspend = intc_suspend,
-+ .resume = intc_resume,
-+};
-+
-+static int __init intc_init_sysdev(void)
-+{
-+ int ret;
-+
-+ ret = sysdev_class_register(&intc_class);
-+ if (ret)
-+ return ret;
-+
-+ intc0.sysdev.id = 0;
-+ intc0.sysdev.cls = &intc_class;
-+ ret = sysdev_register(&intc0.sysdev);
-+
-+ return ret;
-+}
-+device_initcall(intc_init_sysdev);
-+
- unsigned long intc_get_pending(unsigned int group)
- {
- return intc_readl(&intc0, INTREQ0 + 4 * group);
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pdc.c
-@@ -0,0 +1,48 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+static int __init pdc_probe(struct platform_device *pdev)
-+{
-+ struct clk *pclk, *hclk;
-+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pclk)) {
-+ dev_err(&pdev->dev, "no pclk defined\n");
-+ return PTR_ERR(pclk);
-+ }
-+ hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(hclk)) {
-+ dev_err(&pdev->dev, "no hclk defined\n");
-+ clk_put(pclk);
-+ return PTR_ERR(hclk);
-+ }
-+
-+ clk_enable(pclk);
-+ clk_enable(hclk);
-+
-+ dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
-+ return 0;
-+}
-+
-+static struct platform_driver pdc_driver = {
-+ .probe = pdc_probe,
-+ .driver = {
-+ .name = "pdc",
-+ },
-+};
-+
-+static int __init pdc_init(void)
-+{
-+ return platform_driver_register(&pdc_driver);
-+}
-+arch_initcall(pdc_init);
---- a/arch/avr32/mach-at32ap/pio.c
-+++ b/arch/avr32/mach-at32ap/pio.c
-@@ -157,6 +157,82 @@ fail:
- dump_stack();
- }
-
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port)
-+{
-+ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
-+}
-+
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
-+{
-+ struct pio_device *pio;
-+ u32 old, new;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
-+
-+ /* Try to allocate the pins */
-+ do {
-+ old = pio->pinmux_mask;
-+ if (old & pins)
-+ return -EBUSY;
-+
-+ new = old | pins;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+
-+ /* That went well, now configure the port */
-+ pio_writel(pio, OER, oe_mask);
-+ pio_writel(pio, PER, pins);
-+
-+ return 0;
-+}
-+
-+void at32_deselect_pins(unsigned int port, u32 pins)
-+{
-+ struct pio_device *pio;
-+ u32 old, new;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+ /* Return to a "safe" mux configuration */
-+ pio_writel(pio, PUER, pins);
-+ pio_writel(pio, ODR, pins);
-+
-+ /* Deallocate the pins */
-+ do {
-+ old = pio->pinmux_mask;
-+ new = old & ~pins;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+}
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
-+{
-+ struct pio_device *pio;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+ return pio_readl(pio, PDSR) & pins;
-+}
-+
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
-+{
-+ struct pio_device *pio;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+ /* No atomic updates for now... */
-+ pio_writel(pio, CODR, ~value & mask);
-+ pio_writel(pio, SODR, value & mask);
-+}
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
-+
- /*--------------------------------------------------------------------------*/
-
- /* GPIO API */
-@@ -318,6 +394,8 @@ static void pio_bank_show(struct seq_fil
- const char *label;
-
- label = gpiochip_is_requested(chip, i);
-+ if (!label && (imr & mask))
-+ label = "[irq]";
- if (!label)
- continue;
-
---- a/arch/avr32/mach-at32ap/pio.h
-+++ b/arch/avr32/mach-at32ap/pio.h
-@@ -57,7 +57,7 @@
-
- /* Bitfields in IFDR */
-
--/* Bitfields in ISFR */
-+/* Bitfields in IFSR */
-
- /* Bitfields in SODR */
-
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
-@@ -0,0 +1,174 @@
-+/*
-+ * Low-level Power Management code.
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/asm.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/thread_info.h>
-+#include <asm/arch/pm.h>
-+
-+#include "pm.h"
-+#include "sdramc.h"
-+
-+/* Same as 0xfff00000 but fits in a 21 bit signed immediate */
-+#define PM_BASE -0x100000
-+
-+ .section .bss, "wa", @nobits
-+ .global disable_idle_sleep
-+ .type disable_idle_sleep, @object
-+disable_idle_sleep:
-+ .int 4
-+ .size disable_idle_sleep, . - disable_idle_sleep
-+
-+ /* Keep this close to the irq handlers */
-+ .section .irq.text, "ax", @progbits
-+
-+ /*
-+ * void cpu_enter_idle(void)
-+ *
-+ * Put the CPU into "idle" mode, in which it will consume
-+ * significantly less power.
-+ *
-+ * If an interrupt comes along in the window between
-+ * unmask_interrupts and the sleep instruction below, the
-+ * interrupt code will adjust the return address so that we
-+ * never execute the sleep instruction. This is required
-+ * because the AP7000 doesn't unmask interrupts when entering
-+ * sleep modes; later CPUs may not need this workaround.
-+ */
-+ .global cpu_enter_idle
-+ .type cpu_enter_idle, @function
-+cpu_enter_idle:
-+ mask_interrupts
-+ get_thread_info r8
-+ ld.w r9, r8[TI_flags]
-+ bld r9, TIF_NEED_RESCHED
-+ brcs .Lret_from_sleep
-+ sbr r9, TIF_CPU_GOING_TO_SLEEP
-+ st.w r8[TI_flags], r9
-+ unmask_interrupts
-+ sleep CPU_SLEEP_IDLE
-+ .size cpu_idle_sleep, . - cpu_idle_sleep
-+
-+ /*
-+ * Common return path for PM functions that don't run from
-+ * SRAM.
-+ */
-+ .global cpu_idle_skip_sleep
-+ .type cpu_idle_skip_sleep, @function
-+cpu_idle_skip_sleep:
-+ mask_interrupts
-+ ld.w r9, r8[TI_flags]
-+ cbr r9, TIF_CPU_GOING_TO_SLEEP
-+ st.w r8[TI_flags], r9
-+.Lret_from_sleep:
-+ unmask_interrupts
-+ retal r12
-+ .size cpu_idle_skip_sleep, . - cpu_idle_skip_sleep
-+
-+#ifdef CONFIG_PM
-+ .section .init.text, "ax", @progbits
-+
-+ .global pm_exception
-+ .type pm_exception, @function
-+pm_exception:
-+ /*
-+ * Exceptions are masked when we switch to this handler, so
-+ * we'll only get "unrecoverable" exceptions (offset 0.)
-+ */
-+ sub r12, pc, . - .Lpanic_msg
-+ lddpc pc, .Lpanic_addr
-+
-+ .align 2
-+.Lpanic_addr:
-+ .long panic
-+.Lpanic_msg:
-+ .asciz "Unrecoverable exception during suspend\n"
-+ .size pm_exception, . - pm_exception
-+
-+ .global pm_irq0
-+ .type pm_irq0, @function
-+pm_irq0:
-+ /* Disable interrupts and return after the sleep instruction */
-+ mfsr r9, SYSREG_RSR_INT0
-+ mtsr SYSREG_RAR_INT0, r8
-+ sbr r9, SYSREG_GM_OFFSET
-+ mtsr SYSREG_RSR_INT0, r9
-+ rete
-+
-+ /*
-+ * void cpu_enter_standby(unsigned long sdramc_base)
-+ *
-+ * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers
-+ * are suspended and interrupts are disabled. Interrupts
-+ * marked as 'wakeup' event sources may still come along and
-+ * get us out of here.
-+ *
-+ * The SDRAM will be put into self-refresh mode (which does
-+ * not require a clock from the CPU), and the CPU will be put
-+ * into "frozen" mode (HSB bus stopped). The SDRAM controller
-+ * will automatically bring the SDRAM into normal mode on the
-+ * first access, and the power manager will automatically
-+ * start the HSB and CPU clocks upon a wakeup event.
-+ *
-+ * This code uses the same "skip sleep" technique as above.
-+ * It is very important that we jump directly to
-+ * cpu_after_sleep after the sleep instruction since that's
-+ * where we'll end up if the interrupt handler decides that we
-+ * need to skip the sleep instruction.
-+ */
-+ .global pm_standby
-+ .type pm_standby, @function
-+pm_standby:
-+ /*
-+ * interrupts are already masked at this point, and EVBA
-+ * points to pm_exception above.
-+ */
-+ ld.w r10, r12[SDRAMC_LPR]
-+ sub r8, pc, . - 1f /* return address for irq handler */
-+ mov r11, SDRAMC_LPR_LPCB_SELF_RFR
-+ bfins r10, r11, 0, 2 /* LPCB <- self Refresh */
-+ sync 0 /* flush write buffer */
-+ st.w r12[SDRAMC_LPR], r11 /* put SDRAM in self-refresh mode */
-+ ld.w r11, r12[SDRAMC_LPR]
-+ unmask_interrupts
-+ sleep CPU_SLEEP_FROZEN
-+1: mask_interrupts
-+ retal r12
-+ .size pm_standby, . - pm_standby
-+
-+ .global pm_suspend_to_ram
-+ .type pm_suspend_to_ram, @function
-+pm_suspend_to_ram:
-+ /*
-+ * interrupts are already masked at this point, and EVBA
-+ * points to pm_exception above.
-+ */
-+ mov r11, 0
-+ cache r11[2], 8 /* clean all dcache lines */
-+ sync 0 /* flush write buffer */
-+ ld.w r10, r12[SDRAMC_LPR]
-+ sub r8, pc, . - 1f /* return address for irq handler */
-+ mov r11, SDRAMC_LPR_LPCB_SELF_RFR
-+ bfins r10, r11, 0, 2 /* LPCB <- self refresh */
-+ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */
-+ ld.w r11, r12[SDRAMC_LPR]
-+
-+ unmask_interrupts
-+ sleep CPU_SLEEP_STOP
-+1: mask_interrupts
-+
-+ retal r12
-+ .size pm_suspend_to_ram, . - pm_suspend_to_ram
-+
-+ .global pm_sram_end
-+ .type pm_sram_end, @function
-+pm_sram_end:
-+ .size pm_sram_end, 0
-+
-+#endif /* CONFIG_PM */
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pm.c
-@@ -0,0 +1,245 @@
-+/*
-+ * AVR32 AP Power Management
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ */
-+#include <linux/io.h>
-+#include <linux/suspend.h>
-+#include <linux/vmalloc.h>
-+
-+#include <asm/cacheflush.h>
-+#include <asm/sysreg.h>
-+
-+#include <asm/arch/pm.h>
-+#include <asm/arch/sram.h>
-+
-+/* FIXME: This is only valid for AP7000 */
-+#define SDRAMC_BASE 0xfff03800
-+
-+#include "sdramc.h"
-+
-+#define SRAM_PAGE_FLAGS (SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1) \
-+ | SYSREG_BF(AP, 3) | SYSREG_BIT(G))
-+
-+
-+static unsigned long pm_sram_start;
-+static size_t pm_sram_size;
-+static struct vm_struct *pm_sram_area;
-+
-+static void (*avr32_pm_enter_standby)(unsigned long sdramc_base);
-+static void (*avr32_pm_enter_str)(unsigned long sdramc_base);
-+
-+/*
-+ * Must be called with interrupts disabled. Exceptions will be masked
-+ * on return (i.e. all exceptions will be "unrecoverable".)
-+ */
-+static void *avr32_pm_map_sram(void)
-+{
-+ unsigned long vaddr;
-+ unsigned long page_addr;
-+ u32 tlbehi;
-+ u32 mmucr;
-+
-+ vaddr = (unsigned long)pm_sram_area->addr;
-+ page_addr = pm_sram_start & PAGE_MASK;
-+
-+ /*
-+ * Mask exceptions and grab the first TLB entry. We won't be
-+ * needing it while sleeping.
-+ */
-+ asm volatile("ssrf %0" : : "i"(SYSREG_EM_OFFSET) : "memory");
-+
-+ mmucr = sysreg_read(MMUCR);
-+ tlbehi = sysreg_read(TLBEHI);
-+ sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
-+
-+ tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
-+ tlbehi |= vaddr & PAGE_MASK;
-+ tlbehi |= SYSREG_BIT(TLBEHI_V);
-+
-+ sysreg_write(TLBELO, page_addr | SRAM_PAGE_FLAGS);
-+ sysreg_write(TLBEHI, tlbehi);
-+ __builtin_tlbw();
-+
-+ return (void *)(vaddr + pm_sram_start - page_addr);
-+}
-+
-+/*
-+ * Must be called with interrupts disabled. Exceptions will be
-+ * unmasked on return.
-+ */
-+static void avr32_pm_unmap_sram(void)
-+{
-+ u32 mmucr;
-+ u32 tlbehi;
-+ u32 tlbarlo;
-+
-+ /* Going to update TLB entry at index 0 */
-+ mmucr = sysreg_read(MMUCR);
-+ tlbehi = sysreg_read(TLBEHI);
-+ sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
-+
-+ /* Clear the "valid" bit */
-+ tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
-+ sysreg_write(TLBEHI, tlbehi);
-+
-+ /* Mark it as "not accessed" */
-+ tlbarlo = sysreg_read(TLBARLO);
-+ sysreg_write(TLBARLO, tlbarlo | 0x80000000U);
-+
-+ /* Update the TLB */
-+ __builtin_tlbw();
-+
-+ /* Unmask exceptions */
-+ asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET) : "memory");
-+}
-+
-+static int avr32_pm_valid_state(suspend_state_t state)
-+{
-+ switch (state) {
-+ case PM_SUSPEND_ON:
-+ case PM_SUSPEND_STANDBY:
-+ case PM_SUSPEND_MEM:
-+ return 1;
-+
-+ default:
-+ return 0;
-+ }
-+}
-+
-+static int avr32_pm_enter(suspend_state_t state)
-+{
-+ u32 lpr_saved;
-+ u32 evba_saved;
-+ void *sram;
-+
-+ switch (state) {
-+ case PM_SUSPEND_STANDBY:
-+ sram = avr32_pm_map_sram();
-+
-+ /* Switch to in-sram exception handlers */
-+ evba_saved = sysreg_read(EVBA);
-+ sysreg_write(EVBA, (unsigned long)sram);
-+
-+ /*
-+ * Save the LPR register so that we can re-enable
-+ * SDRAM Low Power mode on resume.
-+ */
-+ lpr_saved = sdramc_readl(LPR);
-+ pr_debug("%s: Entering standby...\n", __func__);
-+ avr32_pm_enter_standby(SDRAMC_BASE);
-+ sdramc_writel(LPR, lpr_saved);
-+
-+ /* Switch back to regular exception handlers */
-+ sysreg_write(EVBA, evba_saved);
-+
-+ avr32_pm_unmap_sram();
-+ break;
-+
-+ case PM_SUSPEND_MEM:
-+ sram = avr32_pm_map_sram();
-+
-+ /* Switch to in-sram exception handlers */
-+ evba_saved = sysreg_read(EVBA);
-+ sysreg_write(EVBA, (unsigned long)sram);
-+
-+ /*
-+ * Save the LPR register so that we can re-enable
-+ * SDRAM Low Power mode on resume.
-+ */
-+ lpr_saved = sdramc_readl(LPR);
-+ pr_debug("%s: Entering suspend-to-ram...\n", __func__);
-+ avr32_pm_enter_str(SDRAMC_BASE);
-+ sdramc_writel(LPR, lpr_saved);
-+
-+ /* Switch back to regular exception handlers */
-+ sysreg_write(EVBA, evba_saved);
-+
-+ avr32_pm_unmap_sram();
-+ break;
-+
-+ case PM_SUSPEND_ON:
-+ pr_debug("%s: Entering idle...\n", __func__);
-+ cpu_enter_idle();
-+ break;
-+
-+ default:
-+ pr_debug("%s: Invalid suspend state %d\n", __func__, state);
-+ goto out;
-+ }
-+
-+ pr_debug("%s: wakeup\n", __func__);
-+
-+out:
-+ return 0;
-+}
-+
-+static struct platform_suspend_ops avr32_pm_ops = {
-+ .valid = avr32_pm_valid_state,
-+ .enter = avr32_pm_enter,
-+};
-+
-+static unsigned long avr32_pm_offset(void *symbol)
-+{
-+ extern u8 pm_exception[];
-+
-+ return (unsigned long)symbol - (unsigned long)pm_exception;
-+}
-+
-+static int __init avr32_pm_init(void)
-+{
-+ extern u8 pm_exception[];
-+ extern u8 pm_irq0[];
-+ extern u8 pm_standby[];
-+ extern u8 pm_suspend_to_ram[];
-+ extern u8 pm_sram_end[];
-+ void *dst;
-+
-+ /*
-+ * To keep things simple, we depend on not needing more than a
-+ * single page.
-+ */
-+ pm_sram_size = avr32_pm_offset(pm_sram_end);
-+ if (pm_sram_size > PAGE_SIZE)
-+ goto err;
-+
-+ pm_sram_start = sram_alloc(pm_sram_size);
-+ if (!pm_sram_start)
-+ goto err_alloc_sram;
-+
-+ /* Grab a virtual area we can use later on. */
-+ pm_sram_area = get_vm_area(pm_sram_size, VM_IOREMAP);
-+ if (!pm_sram_area)
-+ goto err_vm_area;
-+ pm_sram_area->phys_addr = pm_sram_start;
-+
-+ local_irq_disable();
-+ dst = avr32_pm_map_sram();
-+ memcpy(dst, pm_exception, pm_sram_size);
-+ flush_dcache_region(dst, pm_sram_size);
-+ invalidate_icache_region(dst, pm_sram_size);
-+ avr32_pm_unmap_sram();
-+ local_irq_enable();
-+
-+ avr32_pm_enter_standby = dst + avr32_pm_offset(pm_standby);
-+ avr32_pm_enter_str = dst + avr32_pm_offset(pm_suspend_to_ram);
-+ intc_set_suspend_handler(avr32_pm_offset(pm_irq0));
-+
-+ suspend_set_ops(&avr32_pm_ops);
-+
-+ printk("AVR32 AP Power Management enabled\n");
-+
-+ return 0;
-+
-+err_vm_area:
-+ sram_free(pm_sram_start, pm_sram_size);
-+err_alloc_sram:
-+err:
-+ pr_err("AVR32 Power Management initialization failed\n");
-+ return -ENOMEM;
-+}
-+arch_initcall(avr32_pm_init);
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/sdramc.h
-@@ -0,0 +1,76 @@
-+/*
-+ * Register definitions for the AT32AP SDRAM Controller
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ */
-+
-+/* Register offsets */
-+#define SDRAMC_MR 0x0000
-+#define SDRAMC_TR 0x0004
-+#define SDRAMC_CR 0x0008
-+#define SDRAMC_HSR 0x000c
-+#define SDRAMC_LPR 0x0010
-+#define SDRAMC_IER 0x0014
-+#define SDRAMC_IDR 0x0018
-+#define SDRAMC_IMR 0x001c
-+#define SDRAMC_ISR 0x0020
-+#define SDRAMC_MDR 0x0024
-+
-+/* MR - Mode Register */
-+#define SDRAMC_MR_MODE_NORMAL ( 0 << 0)
-+#define SDRAMC_MR_MODE_NOP ( 1 << 0)
-+#define SDRAMC_MR_MODE_BANKS_PRECHARGE ( 2 << 0)
-+#define SDRAMC_MR_MODE_LOAD_MODE ( 3 << 0)
-+#define SDRAMC_MR_MODE_AUTO_REFRESH ( 4 << 0)
-+#define SDRAMC_MR_MODE_EXT_LOAD_MODE ( 5 << 0)
-+#define SDRAMC_MR_MODE_POWER_DOWN ( 6 << 0)
-+
-+/* CR - Configuration Register */
-+#define SDRAMC_CR_NC_8_BITS ( 0 << 0)
-+#define SDRAMC_CR_NC_9_BITS ( 1 << 0)
-+#define SDRAMC_CR_NC_10_BITS ( 2 << 0)
-+#define SDRAMC_CR_NC_11_BITS ( 3 << 0)
-+#define SDRAMC_CR_NR_11_BITS ( 0 << 2)
-+#define SDRAMC_CR_NR_12_BITS ( 1 << 2)
-+#define SDRAMC_CR_NR_13_BITS ( 2 << 2)
-+#define SDRAMC_CR_NB_2_BANKS ( 0 << 4)
-+#define SDRAMC_CR_NB_4_BANKS ( 1 << 4)
-+#define SDRAMC_CR_CAS(x) ((x) << 5)
-+#define SDRAMC_CR_DBW_32_BITS ( 0 << 7)
-+#define SDRAMC_CR_DBW_16_BITS ( 1 << 7)
-+#define SDRAMC_CR_TWR(x) ((x) << 8)
-+#define SDRAMC_CR_TRC(x) ((x) << 12)
-+#define SDRAMC_CR_TRP(x) ((x) << 16)
-+#define SDRAMC_CR_TRCD(x) ((x) << 20)
-+#define SDRAMC_CR_TRAS(x) ((x) << 24)
-+#define SDRAMC_CR_TXSR(x) ((x) << 28)
-+
-+/* HSR - High Speed Register */
-+#define SDRAMC_HSR_DA ( 1 << 0)
-+
-+/* LPR - Low Power Register */
-+#define SDRAMC_LPR_LPCB_INHIBIT ( 0 << 0)
-+#define SDRAMC_LPR_LPCB_SELF_RFR ( 1 << 0)
-+#define SDRAMC_LPR_LPCB_PDOWN ( 2 << 0)
-+#define SDRAMC_LPR_LPCB_DEEP_PDOWN ( 3 << 0)
-+#define SDRAMC_LPR_PASR(x) ((x) << 4)
-+#define SDRAMC_LPR_TCSR(x) ((x) << 8)
-+#define SDRAMC_LPR_DS(x) ((x) << 10)
-+#define SDRAMC_LPR_TIMEOUT(x) ((x) << 12)
-+
-+/* IER/IDR/IMR/ISR - Interrupt Enable/Disable/Mask/Status Register */
-+#define SDRAMC_ISR_RES ( 1 << 0)
-+
-+/* MDR - Memory Device Register */
-+#define SDRAMC_MDR_MD_SDRAM ( 0 << 0)
-+#define SDRAMC_MDR_MD_LOW_PWR_SDRAM ( 1 << 0)
-+
-+/* Register access macros */
-+#define sdramc_readl(reg) \
-+ __raw_readl((void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
-+#define sdramc_writel(reg, value) \
-+ __raw_writel(value, (void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
---- a/arch/avr32/mach-at32ap/time-tc.c
-+++ /dev/null
-@@ -1,218 +0,0 @@
--/*
-- * Copyright (C) 2004-2007 Atmel Corporation
-- *
-- * Based on MIPS implementation arch/mips/kernel/time.c
-- * Copyright 2001 MontaVista Software Inc.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/clk.h>
--#include <linux/clocksource.h>
--#include <linux/time.h>
--#include <linux/module.h>
--#include <linux/interrupt.h>
--#include <linux/irq.h>
--#include <linux/kernel_stat.h>
--#include <linux/errno.h>
--#include <linux/init.h>
--#include <linux/profile.h>
--#include <linux/sysdev.h>
--#include <linux/err.h>
--
--#include <asm/div64.h>
--#include <asm/sysreg.h>
--#include <asm/io.h>
--#include <asm/sections.h>
--
--#include <asm/arch/time.h>
--
--/* how many counter cycles in a jiffy? */
--static u32 cycles_per_jiffy;
--
--/* the count value for the next timer interrupt */
--static u32 expirelo;
--
--/* the I/O registers of the TC module */
--static void __iomem *ioregs;
--
--cycle_t read_cycle_count(void)
--{
-- return (cycle_t)timer_read(ioregs, 0, CV);
--}
--
--struct clocksource clocksource_avr32 = {
-- .name = "avr32",
-- .rating = 342,
-- .read = read_cycle_count,
-- .mask = CLOCKSOURCE_MASK(16),
-- .shift = 16,
-- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
--};
--
--static void avr32_timer_ack(void)
--{
-- u16 count = expirelo;
--
-- /* Ack this timer interrupt and set the next one, use a u16
-- * variable so it will wrap around correctly */
-- count += cycles_per_jiffy;
-- expirelo = count;
-- timer_write(ioregs, 0, RC, expirelo);
--
-- /* Check to see if we have missed any timer interrupts */
-- count = timer_read(ioregs, 0, CV);
-- if ((count - expirelo) < 0x7fff) {
-- expirelo = count + cycles_per_jiffy;
-- timer_write(ioregs, 0, RC, expirelo);
-- }
--}
--
--u32 avr32_hpt_read(void)
--{
-- return timer_read(ioregs, 0, CV);
--}
--
--static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
--{
-- unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
-- unsigned int divs[] = { 4, 8, 16, 32 };
-- int divs_size = ARRAY_SIZE(divs);
-- int i = 0;
-- unsigned long count_hz;
-- unsigned long shift;
-- unsigned long mult;
-- int clock_div = -1;
-- u64 tmp;
--
-- shift = clocksource_avr32.shift;
--
-- do {
-- count_hz = clk_get_rate(pclk) / divs[i];
-- mult = clocksource_hz2mult(count_hz, shift);
-- clocksource_avr32.mult = mult;
--
-- tmp = TICK_NSEC;
-- tmp <<= shift;
-- tmp += mult / 2;
-- do_div(tmp, mult);
--
-- cycles_per_jiffy = tmp;
-- } while (cycles_per_jiffy > cycles_max && ++i < divs_size);
--
-- clock_div = i + 1;
--
-- if (clock_div > divs_size) {
-- pr_debug("timer: could not calculate clock divider\n");
-- return -EFAULT;
-- }
--
-- /* Set the clock divider */
-- timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
--
-- return 0;
--}
--
--int avr32_hpt_init(unsigned int count)
--{
-- struct resource *regs;
-- struct clk *pclk;
-- int irq = -1;
-- int ret = 0;
--
-- ret = -ENXIO;
--
-- irq = platform_get_irq(&at32_systc0_device, 0);
-- if (irq < 0) {
-- pr_debug("timer: could not get irq\n");
-- goto out_error;
-- }
--
-- pclk = clk_get(&at32_systc0_device.dev, "pclk");
-- if (IS_ERR(pclk)) {
-- pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
-- goto out_error;
-- }
-- clk_enable(pclk);
--
-- regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
-- if (!regs) {
-- pr_debug("timer: could not get resource\n");
-- goto out_error_clk;
-- }
--
-- ioregs = ioremap(regs->start, regs->end - regs->start + 1);
-- if (!ioregs) {
-- pr_debug("timer: could not get ioregs\n");
-- goto out_error_clk;
-- }
--
-- ret = avr32_timer_calc_div_and_set_jiffies(pclk);
-- if (ret)
-- goto out_error_io;
--
-- ret = setup_irq(irq, &timer_irqaction);
-- if (ret) {
-- pr_debug("timer: could not request irq %d: %d\n",
-- irq, ret);
-- goto out_error_io;
-- }
--
-- expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
-- * cycles_per_jiffy;
--
-- /* Enable clock and interrupts on RC compare */
-- timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
-- timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
-- /* Set cycles to first interrupt */
-- timer_write(ioregs, 0, RC, expirelo);
--
-- printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
-- ioregs, irq);
--
-- return 0;
--
--out_error_io:
-- iounmap(ioregs);
--out_error_clk:
-- clk_put(pclk);
--out_error:
-- return ret;
--}
--
--int avr32_hpt_start(void)
--{
-- timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
-- return 0;
--}
--
--irqreturn_t timer_interrupt(int irq, void *dev_id)
--{
-- unsigned int sr = timer_read(ioregs, 0, SR);
--
-- if (sr & TIMER_BIT(SR_CPCS)) {
-- /* ack timer interrupt and try to set next interrupt */
-- avr32_timer_ack();
--
-- /*
-- * Call the generic timer interrupt handler
-- */
-- write_seqlock(&xtime_lock);
-- do_timer(1);
-- write_sequnlock(&xtime_lock);
--
-- /*
-- * In UP mode, we call local_timer_interrupt() to do profiling
-- * and process accounting.
-- *
-- * SMP is not supported yet.
-- */
-- local_timer_interrupt(irq, dev_id);
--
-- return IRQ_HANDLED;
-- }
--
-- return IRQ_NONE;
--}
---- a/arch/avr32/mm/init.c
-+++ b/arch/avr32/mm/init.c
-@@ -11,6 +11,7 @@
- #include <linux/swap.h>
- #include <linux/init.h>
- #include <linux/mmzone.h>
-+#include <linux/module.h>
- #include <linux/bootmem.h>
- #include <linux/pagemap.h>
- #include <linux/nodemask.h>
-@@ -23,20 +24,20 @@
- #include <asm/setup.h>
- #include <asm/sections.h>
-
-+#define __page_aligned __attribute__((section(".data.page_aligned")))
-+
- DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
--pgd_t swapper_pg_dir[PTRS_PER_PGD];
-+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned;
-
- struct page *empty_zero_page;
-+EXPORT_SYMBOL(empty_zero_page);
-
- /*
- * Cache of MMU context last used.
- */
- unsigned long mmu_context_cache = NO_CONTEXT;
-
--#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
--#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
--
- void show_mem(void)
- {
- int total = 0, reserved = 0, cached = 0;
-@@ -109,19 +110,9 @@ void __init paging_init(void)
- zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0),
- PAGE_SIZE);
-
-- {
-- pgd_t *pg_dir;
-- int i;
--
-- pg_dir = swapper_pg_dir;
-- sysreg_write(PTBR, (unsigned long)pg_dir);
--
-- for (i = 0; i < PTRS_PER_PGD; i++)
-- pgd_val(pg_dir[i]) = 0;
--
-- enable_mmu();
-- printk ("CPU: Paging enabled\n");
-- }
-+ sysreg_write(PTBR, (unsigned long)swapper_pg_dir);
-+ enable_mmu();
-+ printk ("CPU: Paging enabled\n");
-
- for_each_online_node(nid) {
- pg_data_t *pgdat = NODE_DATA(nid);
---- a/arch/avr32/mm/tlb.c
-+++ b/arch/avr32/mm/tlb.c
-@@ -11,21 +11,21 @@
-
- #include <asm/mmu_context.h>
-
--#define _TLBEHI_I 0x100
-+/* TODO: Get the correct number from the CONFIG1 system register */
-+#define NR_TLB_ENTRIES 32
-
--void show_dtlb_entry(unsigned int index)
-+static void show_dtlb_entry(unsigned int index)
- {
-- unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
-+ u32 tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
- unsigned long flags;
-
- local_irq_save(flags);
- mmucr_save = sysreg_read(MMUCR);
- tlbehi_save = sysreg_read(TLBEHI);
-- mmucr = mmucr_save & 0x13;
-- mmucr |= index << 14;
-+ mmucr = SYSREG_BFINS(DRP, index, mmucr_save);
- sysreg_write(MMUCR, mmucr);
-
-- asm volatile("tlbr" : : : "memory");
-+ __builtin_tlbr();
- cpu_sync_pipeline();
-
- tlbehi = sysreg_read(TLBEHI);
-@@ -33,15 +33,17 @@ void show_dtlb_entry(unsigned int index)
-
- printk("%2u: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
- index,
-- (tlbehi & 0x200)?'1':'0',
-- (tlbelo & 0x100)?'1':'0',
-- (tlbehi & 0xff),
-- (tlbehi >> 12), (tlbelo >> 12),
-- (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
-- (tlbelo & 0x200)?'1':'0',
-- (tlbelo & 0x080)?'1':'0',
-- (tlbelo & 0x001)?'1':'0',
-- (tlbelo & 0x002)?'1':'0');
-+ SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
-+ SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
-+ SYSREG_BFEXT(ASID, tlbehi),
-+ SYSREG_BFEXT(VPN, tlbehi) >> 2,
-+ SYSREG_BFEXT(PFN, tlbelo) >> 2,
-+ SYSREG_BFEXT(AP, tlbelo),
-+ SYSREG_BFEXT(SZ, tlbelo),
-+ SYSREG_BFEXT(TLBELO_C, tlbelo) ? 'C' : ' ',
-+ SYSREG_BFEXT(B, tlbelo) ? 'B' : ' ',
-+ SYSREG_BFEXT(W, tlbelo) ? 'W' : ' ',
-+ SYSREG_BFEXT(TLBELO_D, tlbelo) ? 'D' : ' ');
-
- sysreg_write(MMUCR, mmucr_save);
- sysreg_write(TLBEHI, tlbehi_save);
-@@ -54,29 +56,33 @@ void dump_dtlb(void)
- unsigned int i;
-
- printk("ID V G ASID VPN PFN AP SZ C B W D\n");
-- for (i = 0; i < 32; i++)
-+ for (i = 0; i < NR_TLB_ENTRIES; i++)
- show_dtlb_entry(i);
- }
-
--static unsigned long last_mmucr;
--
--static inline void set_replacement_pointer(unsigned shift)
-+static void update_dtlb(unsigned long address, pte_t pte)
- {
-- unsigned long mmucr, mmucr_save;
-+ u32 tlbehi;
-+ u32 mmucr;
-
-- mmucr = mmucr_save = sysreg_read(MMUCR);
-+ /*
-+ * We're not changing the ASID here, so no need to flush the
-+ * pipeline.
-+ */
-+ tlbehi = sysreg_read(TLBEHI);
-+ tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
-+ tlbehi |= address & MMU_VPN_MASK;
-+ tlbehi |= SYSREG_BIT(TLBEHI_V);
-+ sysreg_write(TLBEHI, tlbehi);
-
- /* Does this mapping already exist? */
-- __asm__ __volatile__(
-- " tlbs\n"
-- " mfsr %0, %1"
-- : "=r"(mmucr)
-- : "i"(SYSREG_MMUCR));
-+ __builtin_tlbs();
-+ mmucr = sysreg_read(MMUCR);
-
- if (mmucr & SYSREG_BIT(MMUCR_N)) {
- /* Not found -- pick a not-recently-accessed entry */
-- unsigned long rp;
-- unsigned long tlbar = sysreg_read(TLBARLO);
-+ unsigned int rp;
-+ u32 tlbar = sysreg_read(TLBARLO);
-
- rp = 32 - fls(tlbar);
- if (rp == 32) {
-@@ -84,30 +90,14 @@ static inline void set_replacement_point
- sysreg_write(TLBARLO, -1L);
- }
-
-- mmucr &= 0x13;
-- mmucr |= (rp << shift);
--
-+ mmucr = SYSREG_BFINS(DRP, rp, mmucr);
- sysreg_write(MMUCR, mmucr);
- }
-
-- last_mmucr = mmucr;
--}
--
--static void update_dtlb(unsigned long address, pte_t pte, unsigned long asid)
--{
-- unsigned long vpn;
--
-- vpn = (address & MMU_VPN_MASK) | _TLBEHI_VALID | asid;
-- sysreg_write(TLBEHI, vpn);
-- cpu_sync_pipeline();
--
-- set_replacement_pointer(14);
--
- sysreg_write(TLBELO, pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK);
-
- /* Let's go */
-- asm volatile("nop\n\ttlbw" : : : "memory");
-- cpu_sync_pipeline();
-+ __builtin_tlbw();
- }
-
- void update_mmu_cache(struct vm_area_struct *vma,
-@@ -120,39 +110,40 @@ void update_mmu_cache(struct vm_area_str
- return;
-
- local_irq_save(flags);
-- update_dtlb(address, pte, get_asid());
-+ update_dtlb(address, pte);
- local_irq_restore(flags);
- }
-
--void __flush_tlb_page(unsigned long asid, unsigned long page)
-+static void __flush_tlb_page(unsigned long asid, unsigned long page)
- {
-- unsigned long mmucr, tlbehi;
-+ u32 mmucr, tlbehi;
-
-- page |= asid;
-- sysreg_write(TLBEHI, page);
-- cpu_sync_pipeline();
-- asm volatile("tlbs");
-+ /*
-+ * Caller is responsible for masking out non-PFN bits in page
-+ * and changing the current ASID if necessary. This means that
-+ * we don't need to flush the pipeline after writing TLBEHI.
-+ */
-+ tlbehi = page | asid;
-+ sysreg_write(TLBEHI, tlbehi);
-+
-+ __builtin_tlbs();
- mmucr = sysreg_read(MMUCR);
-
- if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
-- unsigned long tlbarlo;
-- unsigned long entry;
-+ unsigned int entry;
-+ u32 tlbarlo;
-
- /* Clear the "valid" bit */
-- tlbehi = sysreg_read(TLBEHI);
-- tlbehi &= ~_TLBEHI_VALID;
- sysreg_write(TLBEHI, tlbehi);
-- cpu_sync_pipeline();
-
- /* mark the entry as "not accessed" */
-- entry = (mmucr >> 14) & 0x3f;
-+ entry = SYSREG_BFEXT(DRP, mmucr);
- tlbarlo = sysreg_read(TLBARLO);
-- tlbarlo |= (0x80000000 >> entry);
-+ tlbarlo |= (0x80000000UL >> entry);
- sysreg_write(TLBARLO, tlbarlo);
-
- /* update the entry with valid bit clear */
-- asm volatile("tlbw");
-- cpu_sync_pipeline();
-+ __builtin_tlbw();
- }
- }
-
-@@ -190,17 +181,22 @@ void flush_tlb_range(struct vm_area_stru
-
- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-+
- if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
- mm->context = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm);
- } else {
-- unsigned long asid = mm->context & MMU_CONTEXT_ASID_MASK;
-- unsigned long saved_asid = MMU_NO_ASID;
-+ unsigned long asid;
-+ unsigned long saved_asid;
-+
-+ asid = mm->context & MMU_CONTEXT_ASID_MASK;
-+ saved_asid = MMU_NO_ASID;
-
- start &= PAGE_MASK;
- end += (PAGE_SIZE - 1);
- end &= PAGE_MASK;
-+
- if (mm != current->mm) {
- saved_asid = get_asid();
- set_asid(asid);
-@@ -218,33 +214,34 @@ void flush_tlb_range(struct vm_area_stru
- }
-
- /*
-- * TODO: If this is only called for addresses > TASK_SIZE, we can probably
-- * skip the ASID stuff and just use the Global bit...
-+ * This function depends on the pages to be flushed having the G
-+ * (global) bit set in their pte. This is true for all
-+ * PAGE_KERNEL(_RO) pages.
- */
- void flush_tlb_kernel_range(unsigned long start, unsigned long end)
- {
- unsigned long flags;
- int size;
-
-- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
- flush_tlb_all();
- } else {
-- unsigned long asid = init_mm.context & MMU_CONTEXT_ASID_MASK;
-- unsigned long saved_asid = get_asid();
-+ unsigned long asid;
-+
-+ local_irq_save(flags);
-+ asid = get_asid();
-
- start &= PAGE_MASK;
- end += (PAGE_SIZE - 1);
- end &= PAGE_MASK;
-- set_asid(asid);
-+
- while (start < end) {
- __flush_tlb_page(asid, start);
- start += PAGE_SIZE;
- }
-- set_asid(saved_asid);
-+ local_irq_restore(flags);
- }
-- local_irq_restore(flags);
- }
-
- void flush_tlb_mm(struct mm_struct *mm)
-@@ -280,7 +277,7 @@ static void *tlb_start(struct seq_file *
- {
- static unsigned long tlb_index;
-
-- if (*pos >= 32)
-+ if (*pos >= NR_TLB_ENTRIES)
- return NULL;
-
- tlb_index = 0;
-@@ -291,7 +288,7 @@ static void *tlb_next(struct seq_file *t
- {
- unsigned long *index = v;
-
-- if (*index >= 31)
-+ if (*index >= NR_TLB_ENTRIES - 1)
- return NULL;
-
- ++*pos;
-@@ -313,16 +310,16 @@ static int tlb_show(struct seq_file *tlb
- if (*index == 0)
- seq_puts(tlb, "ID V G ASID VPN PFN AP SZ C B W D\n");
-
-- BUG_ON(*index >= 32);
-+ BUG_ON(*index >= NR_TLB_ENTRIES);
-
- local_irq_save(flags);
- mmucr_save = sysreg_read(MMUCR);
- tlbehi_save = sysreg_read(TLBEHI);
-- mmucr = mmucr_save & 0x13;
-- mmucr |= *index << 14;
-+ mmucr = SYSREG_BFINS(DRP, *index, mmucr_save);
- sysreg_write(MMUCR, mmucr);
-
-- asm volatile("tlbr" : : : "memory");
-+ /* TLBR might change the ASID */
-+ __builtin_tlbr();
- cpu_sync_pipeline();
-
- tlbehi = sysreg_read(TLBEHI);
-@@ -334,16 +331,18 @@ static int tlb_show(struct seq_file *tlb
- local_irq_restore(flags);
-
- seq_printf(tlb, "%2lu: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
-- *index,
-- (tlbehi & 0x200)?'1':'0',
-- (tlbelo & 0x100)?'1':'0',
-- (tlbehi & 0xff),
-- (tlbehi >> 12), (tlbelo >> 12),
-- (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
-- (tlbelo & 0x200)?'1':'0',
-- (tlbelo & 0x080)?'1':'0',
-- (tlbelo & 0x001)?'1':'0',
-- (tlbelo & 0x002)?'1':'0');
-+ *index,
-+ SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
-+ SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
-+ SYSREG_BFEXT(ASID, tlbehi),
-+ SYSREG_BFEXT(VPN, tlbehi) >> 2,
-+ SYSREG_BFEXT(PFN, tlbelo) >> 2,
-+ SYSREG_BFEXT(AP, tlbelo),
-+ SYSREG_BFEXT(SZ, tlbelo),
-+ SYSREG_BFEXT(TLBELO_C, tlbelo) ? '1' : '0',
-+ SYSREG_BFEXT(B, tlbelo) ? '1' : '0',
-+ SYSREG_BFEXT(W, tlbelo) ? '1' : '0',
-+ SYSREG_BFEXT(TLBELO_D, tlbelo) ? '1' : '0');
-
- return 0;
- }
---- a/arch/avr32/oprofile/op_model_avr32.c
-+++ b/arch/avr32/oprofile/op_model_avr32.c
-@@ -16,7 +16,6 @@
- #include <linux/sched.h>
- #include <linux/types.h>
-
--#include <asm/intc.h>
- #include <asm/sysreg.h>
- #include <asm/system.h>
-
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -706,7 +706,7 @@ config NVRAM
-
- config RTC
- tristate "Enhanced Real Time Clock Support"
-- depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390
-+ depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390 && !AVR32
- ---help---
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
-@@ -776,7 +776,7 @@ config SGI_IP27_RTC
-
- config GEN_RTC
- tristate "Generic /dev/rtc emulation"
-- depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH
-+ depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32
- ---help---
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
---- a/drivers/char/keyboard.c
-+++ b/drivers/char/keyboard.c
-@@ -1033,7 +1033,8 @@ DECLARE_TASKLET_DISABLED(keyboard_taskle
- #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
- defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
- defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
-- (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
-+ (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) ||\
-+ defined(CONFIG_AVR32)
-
- #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
- ((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001))
---- a/drivers/clocksource/Makefile
-+++ b/drivers/clocksource/Makefile
-@@ -1,3 +1,4 @@
-+obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
- obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
- obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
- obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
---- /dev/null
-+++ b/drivers/clocksource/tcb_clksrc.c
-@@ -0,0 +1,302 @@
-+#include <linux/init.h>
-+#include <linux/clocksource.h>
-+#include <linux/clockchips.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/ioport.h>
-+#include <linux/io.h>
-+#include <linux/platform_device.h>
-+#include <linux/atmel_tc.h>
-+
-+
-+/*
-+ * We're configured to use a specific TC block, one that's not hooked
-+ * up to external hardware, to provide a time solution:
-+ *
-+ * - Two channels combine to create a free-running 32 bit counter
-+ * with a base rate of 5+ MHz, packaged as a clocksource (with
-+ * resolution better than 200 nsec).
-+ *
-+ * - The third channel may be used to provide a 16-bit clockevent
-+ * source, used in either periodic or oneshot mode. This runs
-+ * at 32 KiHZ, and can handle delays of up to two seconds.
-+ *
-+ * A boot clocksource and clockevent source are also currently needed,
-+ * unless the relevant platforms (ARM/AT91, AVR32/AT32) are changed so
-+ * this code can be used when init_timers() is called, well before most
-+ * devices are set up. (Some low end AT91 parts, which can run uClinux,
-+ * have only the timers in one TC block... they currently don't support
-+ * the tclib code, because of that initialization issue.)
-+ *
-+ * REVISIT behavior during system suspend states... we should disable
-+ * all clocks and save the power. Easily done for clockevent devices,
-+ * but clocksources won't necessarily get the needed notifications.
-+ * For deeper system sleep states, this will be mandatory...
-+ */
-+
-+static void __iomem *tcaddr;
-+
-+static cycle_t tc_get_cycles(void)
-+{
-+ unsigned long flags;
-+ u32 lower, upper;
-+
-+ raw_local_irq_save(flags);
-+ do {
-+ upper = __raw_readl(tcaddr + ATMEL_TC_REG(1, CV));
-+ lower = __raw_readl(tcaddr + ATMEL_TC_REG(0, CV));
-+ } while (upper != __raw_readl(tcaddr + ATMEL_TC_REG(1, CV)));
-+
-+ raw_local_irq_restore(flags);
-+ return (upper << 16) | lower;
-+}
-+
-+static struct clocksource clksrc = {
-+ .name = "tcb_clksrc",
-+ .rating = 200,
-+ .read = tc_get_cycles,
-+ .mask = CLOCKSOURCE_MASK(32),
-+ .shift = 18,
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+#ifdef CONFIG_GENERIC_CLOCKEVENTS
-+
-+struct tc_clkevt_device {
-+ struct clock_event_device clkevt;
-+ struct clk *clk;
-+ void __iomem *regs;
-+};
-+
-+static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt)
-+{
-+ return container_of(clkevt, struct tc_clkevt_device, clkevt);
-+}
-+
-+/* For now, we always use the 32K clock ... this optimizes for NO_HZ,
-+ * because using one of the divided clocks would usually mean the
-+ * tick rate can never be less than several dozen Hz (vs 0.5 Hz).
-+ *
-+ * A divided clock could be good for high resolution timers, since
-+ * 30.5 usec resolution can seem "low".
-+ */
-+static u32 timer_clock;
-+
-+static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
-+{
-+ struct tc_clkevt_device *tcd = to_tc_clkevt(d);
-+ void __iomem *regs = tcd->regs;
-+
-+ if (tcd->clkevt.mode == CLOCK_EVT_MODE_PERIODIC
-+ || tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) {
-+ __raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
-+ __raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
-+ clk_disable(tcd->clk);
-+ }
-+
-+ switch (m) {
-+
-+ /* By not making the gentime core emulate periodic mode on top
-+ * of oneshot, we get lower overhead and improved accuracy.
-+ */
-+ case CLOCK_EVT_MODE_PERIODIC:
-+ clk_enable(tcd->clk);
-+
-+ /* slow clock, count up to RC, then irq and restart */
-+ __raw_writel(timer_clock
-+ | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
-+ regs + ATMEL_TC_REG(2, CMR));
-+ __raw_writel((32768 + HZ/2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
-+
-+ /* Enable clock and interrupts on RC compare */
-+ __raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
-+
-+ /* go go gadget! */
-+ __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
-+ regs + ATMEL_TC_REG(2, CCR));
-+ break;
-+
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ clk_enable(tcd->clk);
-+
-+ /* slow clock, count up to RC, then irq and stop */
-+ __raw_writel(timer_clock | ATMEL_TC_CPCSTOP
-+ | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
-+ regs + ATMEL_TC_REG(2, CMR));
-+ __raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
-+
-+ /* set_next_event() configures and starts the timer */
-+ break;
-+
-+ default:
-+ break;
-+ }
-+}
-+
-+static int tc_next_event(unsigned long delta, struct clock_event_device *d)
-+{
-+ __raw_writel(delta, tcaddr + ATMEL_TC_REG(2, RC));
-+
-+ /* go go gadget! */
-+ __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
-+ tcaddr + ATMEL_TC_REG(2, CCR));
-+ return 0;
-+}
-+
-+static struct tc_clkevt_device clkevt = {
-+ .clkevt = {
-+ .name = "tc_clkevt",
-+ .features = CLOCK_EVT_FEAT_PERIODIC
-+ | CLOCK_EVT_FEAT_ONESHOT,
-+ .shift = 32,
-+ /* Should be lower than at91rm9200's system timer */
-+ .rating = 125,
-+ .cpumask = CPU_MASK_CPU0,
-+ .set_next_event = tc_next_event,
-+ .set_mode = tc_mode,
-+ },
-+};
-+
-+static irqreturn_t ch2_irq(int irq, void *handle)
-+{
-+ struct tc_clkevt_device *dev = handle;
-+ unsigned int sr;
-+
-+ sr = __raw_readl(dev->regs + ATMEL_TC_REG(2, SR));
-+ if (sr & ATMEL_TC_CPCS) {
-+ dev->clkevt.event_handler(&dev->clkevt);
-+ return IRQ_HANDLED;
-+ }
-+
-+ return IRQ_NONE;
-+}
-+
-+static struct irqaction tc_irqaction = {
-+ .name = "tc_clkevt",
-+ .flags = IRQF_TIMER | IRQF_DISABLED,
-+ .handler = ch2_irq,
-+};
-+
-+static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
-+{
-+ struct clk *t2_clk = tc->clk[2];
-+ int irq = tc->irq[2];
-+
-+ clkevt.regs = tc->regs;
-+ clkevt.clk = t2_clk;
-+ tc_irqaction.dev_id = &clkevt;
-+
-+ timer_clock = clk32k_divisor_idx;
-+
-+ clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
-+ clkevt.clkevt.max_delta_ns
-+ = clockevent_delta2ns(0xffff, &clkevt.clkevt);
-+ clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
-+
-+ setup_irq(irq, &tc_irqaction);
-+
-+ clockevents_register_device(&clkevt.clkevt);
-+}
-+
-+#else /* !CONFIG_GENERIC_CLOCKEVENTS */
-+
-+static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
-+{
-+ /* NOTHING */
-+}
-+
-+#endif
-+
-+static int __init tcb_clksrc_init(void)
-+{
-+ static char bootinfo[] __initdata
-+ = KERN_DEBUG "%s: tc%d at %d.%03d MHz\n";
-+
-+ struct platform_device *pdev;
-+ struct atmel_tc *tc;
-+ struct clk *t0_clk;
-+ u32 rate, divided_rate = 0;
-+ int best_divisor_idx = -1;
-+ int clk32k_divisor_idx = -1;
-+ int i;
-+
-+ tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK, clksrc.name);
-+ if (!tc) {
-+ pr_debug("can't alloc TC for clocksource\n");
-+ return -ENODEV;
-+ }
-+ tcaddr = tc->regs;
-+ pdev = tc->pdev;
-+
-+ t0_clk = tc->clk[0];
-+ clk_enable(t0_clk);
-+
-+ /* How fast will we be counting? Pick something over 5 MHz. */
-+ rate = (u32) clk_get_rate(t0_clk);
-+ for (i = 0; i < 5; i++) {
-+ unsigned divisor = atmel_tc_divisors[i];
-+ unsigned tmp;
-+
-+ /* remember 32 KiHz clock for later */
-+ if (!divisor) {
-+ clk32k_divisor_idx = i;
-+ continue;
-+ }
-+
-+ tmp = rate / divisor;
-+ pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp);
-+ if (best_divisor_idx > 0) {
-+ if (tmp < 5 * 1000 * 1000)
-+ continue;
-+ }
-+ divided_rate = tmp;
-+ best_divisor_idx = i;
-+ }
-+
-+ clksrc.mult = clocksource_hz2mult(divided_rate, clksrc.shift);
-+
-+ printk(bootinfo, clksrc.name, CONFIG_ATMEL_TCB_CLKSRC_BLOCK,
-+ divided_rate / 1000000,
-+ ((divided_rate + 500000) % 1000000) / 1000);
-+
-+ /* tclib will give us three clocks no matter what the
-+ * underlying platform supports.
-+ */
-+ clk_enable(tc->clk[1]);
-+
-+ /* channel 0: waveform mode, input mclk/8, clock TIOA0 on overflow */
-+ __raw_writel(best_divisor_idx /* likely divide-by-8 */
-+ | ATMEL_TC_WAVE
-+ | ATMEL_TC_WAVESEL_UP /* free-run */
-+ | ATMEL_TC_ACPA_SET /* TIOA0 rises at 0 */
-+ | ATMEL_TC_ACPC_CLEAR, /* (duty cycle 50%) */
-+ tcaddr + ATMEL_TC_REG(0, CMR));
-+ __raw_writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA));
-+ __raw_writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC));
-+ __raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR)); /* no irqs */
-+ __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
-+
-+ /* channel 1: waveform mode, input TIOA0 */
-+ __raw_writel(ATMEL_TC_XC1 /* input: TIOA0 */
-+ | ATMEL_TC_WAVE
-+ | ATMEL_TC_WAVESEL_UP, /* free-run */
-+ tcaddr + ATMEL_TC_REG(1, CMR));
-+ __raw_writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR)); /* no irqs */
-+ __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR));
-+
-+ /* chain channel 0 to channel 1, then reset all the timers */
-+ __raw_writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR);
-+ __raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
-+
-+ /* and away we go! */
-+ clocksource_register(&clksrc);
-+
-+ /* channel 2: periodic and oneshot timer support */
-+ setup_clkevents(tc, clk32k_divisor_idx);
-+
-+ return 0;
-+}
-+arch_initcall(tcb_clksrc_init);
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -88,6 +88,14 @@ config I2C_AT91
- to support combined I2C messages. Use the i2c-gpio driver
- unless your system can cope with those limitations.
-
-+config I2C_ATMELTWI
-+ tristate "Atmel Two-Wire Interface (TWI)"
-+ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
-+ help
-+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+ AT91-based device and want to use its built-in TWI
-+ functionality.
-+
- config I2C_AU1550
- tristate "Au1550/Au1200 SMBus interface"
- depends on SOC_AU1550 || SOC_AU1200
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
- obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
-
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.c
-@@ -0,0 +1,436 @@
-+/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
-+ *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes
-+ * <ekrangnes at atmel.com>
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
-+ *
-+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
-+ * bugs removed, interrupt routine markedly rewritten
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#undef VERBOSE_DEBUG
-+
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <linux/io.h>
-+
-+#include "i2c-atmeltwi.h"
-+
-+static unsigned int baudrate = 100 * 1000;
-+module_param(baudrate, uint, S_IRUGO);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
-+
-+
-+struct atmel_twi {
-+ void __iomem *regs;
-+ struct i2c_adapter adapter;
-+ struct clk *pclk;
-+ struct completion comp;
-+ u32 mask;
-+ u8 *buf;
-+ u16 len;
-+ u16 acks_left;
-+ int status;
-+ unsigned int irq;
-+
-+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
-+
-+/*
-+ * (Re)Initialize the TWI hardware registers.
-+ */
-+static int twi_hwinit(struct atmel_twi *twi)
-+{
-+ unsigned long cdiv, ckdiv = 0;
-+
-+ /* REVISIT: wait till SCL is high before resetting; otherwise,
-+ * some versions will wedge forever.
-+ */
-+
-+ twi_writel(twi, IDR, ~0UL);
-+ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
-+ twi_readl(twi, SR);
-+
-+ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
-+
-+ while (cdiv > 255) {
-+ ckdiv++;
-+ cdiv = cdiv >> 1;
-+ }
-+
-+ /* REVISIT: there are various errata to consider re CDIV and CHDIV
-+ * here, at least on at91 parts.
-+ */
-+
-+ if (ckdiv > 7)
-+ return -EINVAL;
-+ else
-+ twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
-+ | TWI_BF(CHDIV, cdiv)
-+ | TWI_BF(CLDIV, cdiv));
-+ return 0;
-+}
-+
-+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
-+ * limit, but I2C has no limit at all.
-+ */
-+static int twi_complete(struct atmel_twi *twi, u32 mask)
-+{
-+ int timeout = msecs_to_jiffies(100);
-+
-+ mask |= TWI_BIT(TXCOMP);
-+ twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
-+ init_completion(&twi->comp);
-+
-+ twi_writel(twi, IER, mask);
-+
-+ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
-+ /* RESET TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(SWRST));
-+
-+ /* Reinitialize TWI */
-+ twi_hwinit(twi);
-+
-+ return -ETIMEDOUT;
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * Generic i2c master transfer entrypoint.
-+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
-+{
-+ struct atmel_twi *twi = to_atmel_twi(adap);
-+ int i;
-+
-+ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
-+
-+ twi->status = 0;
-+ for (i = 0; i < num; i++, pmsg++) {
-+ twi->len = pmsg->len;
-+ twi->buf = pmsg->buf;
-+ twi->acks_left = pmsg->len;
-+ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
-+
-+ dev_dbg(&adap->dev,
-+ "#%d: %s %d byte%s %s dev 0x%02x\n",
-+ i,
-+ pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+ pmsg->len,
-+ pmsg->len > 1 ? "s" : "",
-+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
-+
-+ /* enable */
-+ twi_writel(twi, CR, TWI_BIT(MSEN));
-+
-+ if (pmsg->flags & I2C_M_RD) {
-+ /* cleanup after previous RX overruns */
-+ while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
-+ twi_readl(twi, RHR);
-+
-+ if (twi->len == 1)
-+ twi_writel(twi, CR,
-+ TWI_BIT(START) | TWI_BIT(STOP));
-+ else
-+ twi_writel(twi, CR, TWI_BIT(START));
-+
-+ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
-+ dev_dbg(&adap->dev, "RX[%d] timeout. "
-+ "Stopped with %d bytes left\n",
-+ i, twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+ } else {
-+ twi_writel(twi, THR, twi->buf[0]);
-+ twi->acks_left--;
-+ /* REVISIT: some chips don't start automagically:
-+ * twi_writel(twi, CR, TWI_BIT(START));
-+ */
-+ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
-+ dev_dbg(&adap->dev, "TX[%d] timeout. "
-+ "Stopped with %d bytes left\n",
-+ i, twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+ /* REVISIT: an erratum workaround may be needed here;
-+ * see sam9261 "STOP not generated" (START either).
-+ */
-+ }
-+
-+ /* Disable TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+
-+ if (twi->status)
-+ return twi->status;
-+
-+ /* WARNING: This driver lies about properly supporting
-+ * repeated start, or it would *ALWAYS* return here. It
-+ * has issued a STOP. Continuing is a false claim -- that
-+ * a second (or third, etc.) message is part of the same
-+ * "combined" (no STOPs between parts) message.
-+ */
-+
-+ } /* end cur msg */
-+
-+ return i;
-+}
-+
-+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id)
-+{
-+ struct atmel_twi *twi = dev_id;
-+ int status = twi_readl(twi, SR);
-+
-+ /* Save state for later debug prints */
-+ int old_status = status;
-+
-+ if (twi->mask & status) {
-+
-+ status &= twi->mask;
-+
-+ if (status & TWI_BIT(RXRDY)) {
-+ if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
-+ /* Note weakness in fault reporting model:
-+ * we can't say "the first N of these data
-+ * bytes are valid".
-+ */
-+ dev_err(&twi->adapter.dev,
-+ "OVERRUN RX! %04x, lost %d\n",
-+ old_status, twi->acks_left);
-+ twi->acks_left = 0;
-+ twi_writel(twi, CR, TWI_BIT(STOP));
-+ twi->status = -EOVERFLOW;
-+ } else if (twi->acks_left > 0) {
-+ twi->buf[twi->len - twi->acks_left] =
-+ twi_readl(twi, RHR);
-+ twi->acks_left--;
-+ }
-+ if (status & TWI_BIT(TXCOMP))
-+ goto done;
-+ if (twi->acks_left == 1)
-+ twi_writel(twi, CR, TWI_BIT(STOP));
-+
-+ } else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
-+ goto done;
-+
-+ } else if (status & TWI_BIT(TXRDY)) {
-+ if (twi->acks_left > 0) {
-+ twi_writel(twi, THR,
-+ twi->buf[twi->len - twi->acks_left]);
-+ twi->acks_left--;
-+ } else
-+ twi_writel(twi, CR, TWI_BIT(STOP));
-+ }
-+
-+ if (twi->acks_left == 0)
-+ twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
-+ }
-+
-+ /* enabling this message helps trigger overruns/underruns ... */
-+ dev_vdbg(&twi->adapter.dev,
-+ "ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
-+ old_status,
-+ twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
-+ twi->acks_left);
-+
-+ return IRQ_HANDLED;
-+
-+done:
-+ /* Note weak fault reporting model: we can't report how many
-+ * bytes we sent before the NAK, or let upper layers choose
-+ * whether to continue. The I2C stack doesn't allow that...
-+ */
-+ if (status & TWI_BIT(NACK)) {
-+ dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
-+ twi->acks_left);
-+ twi->status = -EPIPE;
-+
-+ /* TX underrun morphs automagically into a premature STOP;
-+ * we'll probably observe UVRE even when it's not documented.
-+ */
-+ } else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
-+ dev_err(&twi->adapter.dev, "UNDERRUN TX! %04x, %d to go\n",
-+ old_status, twi->acks_left);
-+ twi->status = -ENOSR;
-+ }
-+
-+ twi_writel(twi, IDR, ~0UL);
-+ complete(&twi->comp);
-+
-+ dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
-+ old_status, twi->acks_left, twi->status);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+/*
-+ * Return list of supported functionality.
-+ *
-+ * NOTE: see warning above about repeated starts; this driver is falsely
-+ * claiming to support "combined" transfers. The mid-message STOPs mean
-+ * some slaves will never work with this driver. (Use i2c-gpio...)
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
-+{
-+ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
-+ & ~I2C_FUNC_SMBUS_QUICK;
-+}
-+
-+static struct i2c_algorithm twi_algorithm = {
-+ .master_xfer = twi_xfer,
-+ .functionality = twi_func,
-+};
-+
-+/*
-+ * Main initialization routine.
-+ */
-+static int __init twi_probe(struct platform_device *pdev)
-+{
-+ struct atmel_twi *twi;
-+ struct resource *regs;
-+ struct clk *pclk;
-+ struct i2c_adapter *adapter;
-+ int rc, irq;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ pclk = clk_get(&pdev->dev, "twi_pclk");
-+ if (IS_ERR(pclk))
-+ return PTR_ERR(pclk);
-+ clk_enable(pclk);
-+
-+ rc = -ENOMEM;
-+ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+ if (!twi) {
-+ dev_dbg(&pdev->dev, "can't allocate interface!\n");
-+ goto err_alloc_twi;
-+ }
-+
-+ twi->pclk = pclk;
-+ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!twi->regs)
-+ goto err_ioremap;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+ if (rc) {
-+ dev_dbg(&pdev->dev, "can't bind irq!\n");
-+ goto err_irq;
-+ }
-+ twi->irq = irq;
-+
-+ rc = twi_hwinit(twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Unable to set baudrate\n");
-+ goto err_hw_init;
-+ }
-+
-+ adapter = &twi->adapter;
-+ sprintf(adapter->name, "TWI");
-+ adapter->algo = &twi_algorithm;
-+ adapter->class = I2C_CLASS_ALL;
-+ adapter->nr = pdev->id;
-+ adapter->dev.parent = &pdev->dev;
-+
-+ platform_set_drvdata(pdev, twi);
-+
-+ rc = i2c_add_numbered_adapter(adapter);
-+ if (rc) {
-+ dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
-+ adapter->name);
-+ goto err_register;
-+ }
-+
-+ dev_info(&pdev->dev,
-+ "Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
-+ baudrate/1000, (unsigned long)regs->start);
-+
-+ return 0;
-+
-+
-+err_register:
-+ platform_set_drvdata(pdev, NULL);
-+
-+err_hw_init:
-+ free_irq(irq, twi);
-+
-+err_irq:
-+ iounmap(twi->regs);
-+
-+err_ioremap:
-+ kfree(twi);
-+
-+err_alloc_twi:
-+ clk_disable(pclk);
-+ clk_put(pclk);
-+
-+ return rc;
-+}
-+
-+static int __exit twi_remove(struct platform_device *pdev)
-+{
-+ struct atmel_twi *twi = platform_get_drvdata(pdev);
-+ int res;
-+
-+ platform_set_drvdata(pdev, NULL);
-+ res = i2c_del_adapter(&twi->adapter);
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+ iounmap(twi->regs);
-+ clk_disable(twi->pclk);
-+ clk_put(twi->pclk);
-+ free_irq(twi->irq, twi);
-+ kfree(twi);
-+
-+ return res;
-+}
-+
-+static struct platform_driver twi_driver = {
-+ .remove = __exit_p(twi_remove),
-+ .driver = {
-+ .name = "atmel_twi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init atmel_twi_init(void)
-+{
-+ return platform_driver_probe(&twi_driver, twi_probe);
-+}
-+
-+static void __exit atmel_twi_exit(void)
-+{
-+ platform_driver_unregister(&twi_driver);
-+}
-+
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
-+
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.h
-@@ -0,0 +1,117 @@
-+/*
-+ * Register definitions for the Atmel Two-Wire Interface
-+ */
-+
-+#ifndef __ATMELTWI_H__
-+#define __ATMELTWI_H__
-+
-+/* TWI register offsets */
-+#define TWI_CR 0x0000
-+#define TWI_MMR 0x0004
-+#define TWI_SMR 0x0008
-+#define TWI_IADR 0x000c
-+#define TWI_CWGR 0x0010
-+#define TWI_SR 0x0020
-+#define TWI_IER 0x0024
-+#define TWI_IDR 0x0028
-+#define TWI_IMR 0x002c
-+#define TWI_RHR 0x0030
-+#define TWI_THR 0x0034
-+
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET 0
-+#define TWI_START_SIZE 1
-+#define TWI_STOP_OFFSET 1
-+#define TWI_STOP_SIZE 1
-+#define TWI_MSEN_OFFSET 2
-+#define TWI_MSEN_SIZE 1
-+#define TWI_MSDIS_OFFSET 3
-+#define TWI_MSDIS_SIZE 1
-+#define TWI_SVEN_OFFSET 4
-+#define TWI_SVEN_SIZE 1
-+#define TWI_SVDIS_OFFSET 5
-+#define TWI_SVDIS_SIZE 1
-+#define TWI_SWRST_OFFSET 7
-+#define TWI_SWRST_SIZE 1
-+
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET 8
-+#define TWI_IADRSZ_SIZE 2
-+#define TWI_MREAD_OFFSET 12
-+#define TWI_MREAD_SIZE 1
-+#define TWI_DADR_OFFSET 16
-+#define TWI_DADR_SIZE 7
-+
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET 16
-+#define TWI_SADR_SIZE 7
-+
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET 0
-+#define TWI_IADR_SIZE 24
-+
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET 0
-+#define TWI_CLDIV_SIZE 8
-+#define TWI_CHDIV_OFFSET 8
-+#define TWI_CHDIV_SIZE 8
-+#define TWI_CKDIV_OFFSET 16
-+#define TWI_CKDIV_SIZE 3
-+
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET 0
-+#define TWI_TXCOMP_SIZE 1
-+#define TWI_RXRDY_OFFSET 1
-+#define TWI_RXRDY_SIZE 1
-+#define TWI_TXRDY_OFFSET 2
-+#define TWI_TXRDY_SIZE 1
-+#define TWI_SVDIR_OFFSET 3
-+#define TWI_SVDIR_SIZE 1
-+#define TWI_SVACC_OFFSET 4
-+#define TWI_SVACC_SIZE 1
-+#define TWI_GCACC_OFFSET 5
-+#define TWI_GCACC_SIZE 1
-+#define TWI_OVRE_OFFSET 6
-+#define TWI_OVRE_SIZE 1
-+#define TWI_UNRE_OFFSET 7
-+#define TWI_UNRE_SIZE 1
-+#define TWI_NACK_OFFSET 8
-+#define TWI_NACK_SIZE 1
-+#define TWI_ARBLST_OFFSET 9
-+#define TWI_ARBLST_SIZE 1
-+
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET 0
-+#define TWI_RXDATA_SIZE 8
-+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET 0
-+#define TWI_TXDATA_SIZE 8
-+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR 0
-+#define TWI_IADRSZ_ONE_BYTE 1
-+#define TWI_IADRSZ_TWO_BYTES 2
-+#define TWI_IADRSZ_THREE_BYTES 3
-+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name) \
-+ (1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name, value) \
-+ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
-+ << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name, value) \
-+ (((value) >> TWI_##name##_OFFSET) \
-+ & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name, value, old) \
-+ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
-+ << TWI_##name##_OFFSET)) \
-+ | TWI_BF(name, (value)))
-+
-+/* Register access macros */
-+#define twi_readl(port, reg) \
-+ __raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port, reg, value) \
-+ __raw_writel((value), (port)->regs + TWI_##reg)
-+
-+#endif /* __ATMELTWI_H__ */
---- a/drivers/input/serio/Kconfig
-+++ b/drivers/input/serio/Kconfig
-@@ -88,6 +88,17 @@ config SERIO_RPCKBD
- To compile this driver as a module, choose M here: the
- module will be called rpckbd.
-
-+config SERIO_AT32PSIF
-+ tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
-+ depends on AVR32
-+ default n
-+ help
-+ Say Y here if you want to use the PSIF peripheral on AVR32 devices
-+ and connect a PS/2 keyboard and/or mouse to it.
-+
-+ To compile this driver as a module, choose M here: the module will
-+ be called at32psif.
-+
- config SERIO_AMBAKMI
- tristate "AMBA KMI keyboard controller"
- depends on ARM_AMBA
---- a/drivers/input/serio/Makefile
-+++ b/drivers/input/serio/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIO_CT82C710) += ct82c710
- obj-$(CONFIG_SERIO_RPCKBD) += rpckbd.o
- obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
- obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
-+obj-$(CONFIG_SERIO_AT32PSIF) += at32psif.o
- obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
- obj-$(CONFIG_SERIO_GSCPS2) += gscps2.o
- obj-$(CONFIG_HP_SDC) += hp_sdc.o
---- /dev/null
-+++ b/drivers/input/serio/at32psif.c
-@@ -0,0 +1,351 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Driver for the AT32AP700X PS/2 controller (PSIF).
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/serio.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+
-+#include "at32psif.h"
-+
-+#define PSIF_BUF_SIZE 16
-+
-+#define ring_is_empty(_psif) (_psif->head == _psif->tail)
-+#define ring_next_head(_psif) ((_psif->head + 1) & (PSIF_BUF_SIZE - 1))
-+#define ring_next_tail(_psif) ((_psif->tail + 1) & (PSIF_BUF_SIZE - 1))
-+
-+struct psif {
-+ struct platform_device *pdev;
-+ struct clk *pclk;
-+ struct serio *io;
-+ struct timer_list tx_timer;
-+ void __iomem *regs;
-+ unsigned int irq;
-+ unsigned int open;
-+ /* Prevent concurrent writes to circular buffer. */
-+ spinlock_t lock;
-+ unsigned int head;
-+ unsigned int tail;
-+ unsigned char buffer[PSIF_BUF_SIZE];
-+};
-+
-+static irqreturn_t psif_interrupt(int irq, void *_ptr)
-+{
-+ struct psif *psif = _ptr;
-+ int retval = IRQ_NONE;
-+ unsigned int io_flags = 0;
-+ unsigned long status;
-+
-+ status = psif_readl(psif, SR);
-+
-+ if (status & PSIF_BIT(RXRDY)) {
-+ unsigned char val = (unsigned char) psif_readl(psif, RHR);
-+
-+ if (status & PSIF_BIT(PARITY))
-+ io_flags |= SERIO_PARITY;
-+ if (status & PSIF_BIT(OVRUN))
-+ dev_err(&psif->pdev->dev, "overrun read error\n");
-+
-+ serio_interrupt(psif->io, val, io_flags);
-+
-+ retval = IRQ_HANDLED;
-+ }
-+
-+ spin_lock(&psif->lock);
-+
-+ if (status & PSIF_BIT(TXEMPTY)) {
-+ if (status & PSIF_BIT(NACK))
-+ dev_err(&psif->pdev->dev, "NACK error\n");
-+
-+ psif_writel(psif, IDR, PSIF_BIT(TXEMPTY));
-+
-+ if (!ring_is_empty(psif))
-+ mod_timer(&psif->tx_timer,
-+ jiffies + msecs_to_jiffies(1));
-+
-+ retval = IRQ_HANDLED;
-+ }
-+
-+ spin_unlock(&psif->lock);
-+
-+ return retval;
-+}
-+
-+static void psif_transmit_data(unsigned long data)
-+{
-+ struct psif *psif = (struct psif *)data;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&psif->lock, flags);
-+
-+ psif_writel(psif, THR, psif->buffer[psif->tail]);
-+ psif->tail = ring_next_tail(psif);
-+
-+ if (!ring_is_empty(psif))
-+ psif_writel(psif, IER, PSIF_BIT(TXEMPTY));
-+
-+ spin_unlock_irqrestore(&psif->lock, flags);
-+}
-+
-+static int psif_write(struct serio *io, unsigned char val)
-+{
-+ struct psif *psif = io->port_data;
-+ unsigned long flags;
-+ unsigned int head;
-+
-+ spin_lock_irqsave(&psif->lock, flags);
-+
-+ head = ring_next_head(psif);
-+
-+ if (head != psif->tail) {
-+ psif->buffer[psif->head] = val;
-+ psif->head = head;
-+ } else {
-+ dev_err(&psif->pdev->dev, "underrun write error\n");
-+ }
-+
-+ spin_unlock_irqrestore(&psif->lock, flags);
-+
-+ /* Make sure TXEMPTY interrupt is enabled. */
-+ psif_writel(psif, IER, PSIF_BIT(TXEMPTY));
-+
-+ return 0;
-+}
-+
-+static int psif_open(struct serio *io)
-+{
-+ struct psif *psif = io->port_data;
-+ int retval;
-+
-+ retval = clk_enable(psif->pclk);
-+ if (retval)
-+ goto out;
-+
-+ psif_writel(psif, CR, PSIF_BIT(CR_TXEN) | PSIF_BIT(CR_RXEN));
-+ psif_writel(psif, IER, PSIF_BIT(RXRDY));
-+
-+ psif->open = 1;
-+out:
-+ return retval;
-+}
-+
-+static void psif_close(struct serio *io)
-+{
-+ struct psif *psif = io->port_data;
-+
-+ psif->open = 0;
-+
-+ psif_writel(psif, IDR, ~0UL);
-+ psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
-+
-+ clk_disable(psif->pclk);
-+}
-+
-+static void psif_set_prescaler(struct psif *psif)
-+{
-+ unsigned long prscv;
-+ unsigned long rate = clk_get_rate(psif->pclk);
-+
-+ /* PRSCV = Pulse length (100 us) * PSIF module frequency. */
-+ prscv = 100 * (rate / 1000000UL);
-+
-+ if (prscv > ((1<<PSIF_PSR_PRSCV_SIZE) - 1)) {
-+ prscv = (1<<PSIF_PSR_PRSCV_SIZE) - 1;
-+ dev_dbg(&psif->pdev->dev, "pclk too fast, "
-+ "prescaler set to max\n");
-+ }
-+
-+ clk_enable(psif->pclk);
-+ psif_writel(psif, PSR, prscv);
-+ clk_disable(psif->pclk);
-+}
-+
-+static int __init psif_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ struct psif *psif;
-+ struct serio *io;
-+ struct clk *pclk;
-+ int irq;
-+ int ret;
-+
-+ psif = kzalloc(sizeof(struct psif), GFP_KERNEL);
-+ if (!psif) {
-+ dev_dbg(&pdev->dev, "out of memory\n");
-+ ret = -ENOMEM;
-+ goto out;
-+ }
-+ psif->pdev = pdev;
-+
-+ io = kzalloc(sizeof(struct serio), GFP_KERNEL);
-+ if (!io) {
-+ dev_dbg(&pdev->dev, "out of memory\n");
-+ ret = -ENOMEM;
-+ goto out_free_psif;
-+ }
-+ psif->io = io;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "no mmio resources defined\n");
-+ ret = -ENOMEM;
-+ goto out_free_io;
-+ }
-+
-+ psif->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!psif->regs) {
-+ ret = -ENOMEM;
-+ dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+ goto out_free_io;
-+ }
-+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pclk)) {
-+ dev_dbg(&pdev->dev, "could not get peripheral clock\n");
-+ ret = PTR_ERR(pclk);
-+ goto out_iounmap;
-+ }
-+ psif->pclk = pclk;
-+
-+ /* Reset the PSIF to enter at a known state. */
-+ ret = clk_enable(pclk);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "could not enable pclk\n");
-+ goto out_put_clk;
-+ }
-+ psif_writel(psif, CR, PSIF_BIT(CR_SWRST));
-+ clk_disable(pclk);
-+
-+ setup_timer(&psif->tx_timer, psif_transmit_data, (unsigned long)psif);
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_dbg(&pdev->dev, "could not get irq\n");
-+ ret = -ENXIO;
-+ goto out_put_clk;
-+ }
-+ ret = request_irq(irq, psif_interrupt, IRQF_SHARED, "at32psif", psif);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
-+ goto out_put_clk;
-+ }
-+ psif->irq = irq;
-+
-+ io->id.type = SERIO_8042;
-+ io->write = psif_write;
-+ io->open = psif_open;
-+ io->close = psif_close;
-+ strlcpy(io->name, pdev->dev.bus_id, sizeof(io->name));
-+ strlcpy(io->phys, pdev->dev.bus_id, sizeof(io->phys));
-+ io->port_data = psif;
-+ io->dev.parent = &pdev->dev;
-+
-+ psif_set_prescaler(psif);
-+
-+ spin_lock_init(&psif->lock);
-+ serio_register_port(psif->io);
-+ platform_set_drvdata(pdev, psif);
-+
-+ dev_info(&pdev->dev, "Atmel AVR32 PSIF PS/2 driver on 0x%08x irq %d\n",
-+ (int)psif->regs, psif->irq);
-+
-+ return 0;
-+
-+out_put_clk:
-+ clk_put(psif->pclk);
-+out_iounmap:
-+ iounmap(psif->regs);
-+out_free_io:
-+ kfree(io);
-+out_free_psif:
-+ kfree(psif);
-+out:
-+ return ret;
-+}
-+
-+static int __exit psif_remove(struct platform_device *pdev)
-+{
-+ struct psif *psif = platform_get_drvdata(pdev);
-+
-+ psif_writel(psif, IDR, ~0UL);
-+ psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
-+
-+ serio_unregister_port(psif->io);
-+ iounmap(psif->regs);
-+ free_irq(psif->irq, psif);
-+ clk_put(psif->pclk);
-+ kfree(psif);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int psif_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ struct psif *psif = platform_get_drvdata(pdev);
-+
-+ if (psif->open) {
-+ psif_writel(psif, CR, PSIF_BIT(CR_RXDIS) | PSIF_BIT(CR_TXDIS));
-+ clk_disable(psif->pclk);
-+ }
-+
-+ return 0;
-+}
-+
-+static int psif_resume(struct platform_device *pdev)
-+{
-+ struct psif *psif = platform_get_drvdata(pdev);
-+
-+ if (psif->open) {
-+ clk_enable(psif->pclk);
-+ psif_set_prescaler(psif);
-+ psif_writel(psif, CR, PSIF_BIT(CR_RXEN) | PSIF_BIT(CR_TXEN));
-+ }
-+
-+ return 0;
-+}
-+#else
-+#define psif_suspend NULL
-+#define psif_resume NULL
-+#endif
-+
-+static struct platform_driver psif_driver = {
-+ .remove = __exit_p(psif_remove),
-+ .driver = {
-+ .name = "atmel_psif",
-+ },
-+ .suspend = psif_suspend,
-+ .resume = psif_resume,
-+};
-+
-+static int __init psif_init(void)
-+{
-+ return platform_driver_probe(&psif_driver, psif_probe);
-+}
-+
-+static void __exit psif_exit(void)
-+{
-+ platform_driver_unregister(&psif_driver);
-+}
-+
-+module_init(psif_init);
-+module_exit(psif_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/input/serio/at32psif.h
-@@ -0,0 +1,82 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Driver for the AT32AP700X PS/2 controller (PSIF).
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef _AT32PSIF_H
-+#define _AT32PSIF_H
-+
-+/* PSIF register offsets */
-+#define PSIF_CR 0x00
-+#define PSIF_RHR 0x04
-+#define PSIF_THR 0x08
-+#define PSIF_SR 0x10
-+#define PSIF_IER 0x14
-+#define PSIF_IDR 0x18
-+#define PSIF_IMR 0x1c
-+#define PSIF_PSR 0x24
-+
-+/* Bitfields in control register. */
-+#define PSIF_CR_RXDIS_OFFSET 1
-+#define PSIF_CR_RXDIS_SIZE 1
-+#define PSIF_CR_RXEN_OFFSET 0
-+#define PSIF_CR_RXEN_SIZE 1
-+#define PSIF_CR_SWRST_OFFSET 15
-+#define PSIF_CR_SWRST_SIZE 1
-+#define PSIF_CR_TXDIS_OFFSET 9
-+#define PSIF_CR_TXDIS_SIZE 1
-+#define PSIF_CR_TXEN_OFFSET 8
-+#define PSIF_CR_TXEN_SIZE 1
-+
-+/* Bitfields in interrupt disable, enable, mask and status register. */
-+#define PSIF_NACK_OFFSET 8
-+#define PSIF_NACK_SIZE 1
-+#define PSIF_OVRUN_OFFSET 5
-+#define PSIF_OVRUN_SIZE 1
-+#define PSIF_PARITY_OFFSET 9
-+#define PSIF_PARITY_SIZE 1
-+#define PSIF_RXRDY_OFFSET 4
-+#define PSIF_RXRDY_SIZE 1
-+#define PSIF_TXEMPTY_OFFSET 1
-+#define PSIF_TXEMPTY_SIZE 1
-+#define PSIF_TXRDY_OFFSET 0
-+#define PSIF_TXRDY_SIZE 1
-+
-+/* Bitfields in prescale register. */
-+#define PSIF_PSR_PRSCV_OFFSET 0
-+#define PSIF_PSR_PRSCV_SIZE 12
-+
-+/* Bitfields in receive hold register. */
-+#define PSIF_RHR_RXDATA_OFFSET 0
-+#define PSIF_RHR_RXDATA_SIZE 8
-+
-+/* Bitfields in transmit hold register. */
-+#define PSIF_THR_TXDATA_OFFSET 0
-+#define PSIF_THR_TXDATA_SIZE 8
-+
-+/* Bit manipulation macros */
-+#define PSIF_BIT(name) \
-+ (1 << PSIF_##name##_OFFSET)
-+#define PSIF_BF(name, value) \
-+ (((value) & ((1 << PSIF_##name##_SIZE) - 1)) \
-+ << PSIF_##name##_OFFSET)
-+#define PSIF_BFEXT(name, value)\
-+ (((value) >> PSIF_##name##_OFFSET) \
-+ & ((1 << PSIF_##name##_SIZE) - 1))
-+#define PSIF_BFINS(name, value, old) \
-+ (((old) & ~(((1 << PSIF_##name##_SIZE) - 1) \
-+ << PSIF_##name##_OFFSET)) \
-+ | PSIF_BF(name, value))
-+
-+/* Register access macros */
-+#define psif_readl(port, reg) \
-+ __raw_readl((port)->regs + PSIF_##reg)
-+#define psif_writel(port, reg, value) \
-+ __raw_writel((value), (port)->regs + PSIF_##reg)
-+
-+#endif /* _AT32PSIF_H */
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -22,6 +22,39 @@ config ATMEL_PWM
- purposes including software controlled power-efficent backlights
- on LCD displays, motor control, and waveform generation.
-
-+config ATMEL_TCLIB
-+ bool "Atmel AT32/AT91 Timer/Counter Library"
-+ depends on (AVR32 || ARCH_AT91)
-+ help
-+ Select this if you want a library to allocate the Timer/Counter
-+ blocks found on many Atmel processors. This facilitates using
-+ these blocks by different drivers despite processor differences.
-+
-+config ATMEL_TCB_CLKSRC
-+ bool "TC Block Clocksource"
-+ depends on ATMEL_TCLIB && GENERIC_TIME
-+ default y
-+ help
-+ Select this to get a high precision clocksource based on a
-+ TC block with a 5+ MHz base clock rate. Two timer channels
-+ are combined to make a single 32-bit timer.
-+
-+ When GENERIC_CLOCKEVENTS is defined, the third timer channel
-+ may be used as a clock event device supporting oneshot mode
-+ (delays of up to two seconds) based on the 32 KiHz clock.
-+
-+config ATMEL_TCB_CLKSRC_BLOCK
-+ int
-+ depends on ATMEL_TCB_CLKSRC
-+ prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
-+ default 0
-+ range 0 1
-+ help
-+ Some chips provide more than one TC block, so you have the
-+ choice of which one to use for the clock framework. The other
-+ TC can be used for other purposes, such as PWM generation and
-+ interval timing.
-+
- config IBM_ASM
- tristate "Device driver for IBM RSA service processor"
- depends on X86 && PCI && INPUT && EXPERIMENTAL
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_ACER_WMI) += acer-wmi.o
- obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
- obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
- obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
-+obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
- obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
- obj-$(CONFIG_LKDTM) += lkdtm.o
- obj-$(CONFIG_TIFM_CORE) += tifm_core.o
---- /dev/null
-+++ b/drivers/misc/atmel_tclib.c
-@@ -0,0 +1,161 @@
-+#include <linux/atmel_tc.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+/* Number of bytes to reserve for the iomem resource */
-+#define ATMEL_TC_IOMEM_SIZE 256
-+
-+
-+/*
-+ * This is a thin library to solve the problem of how to portably allocate
-+ * one of the TC blocks. For simplicity, it doesn't currently expect to
-+ * share individual timers between different drivers.
-+ */
-+
-+#if defined(CONFIG_AVR32)
-+/* AVR32 has these divide PBB */
-+const u8 atmel_tc_divisors[5] = { 0, 4, 8, 16, 32, };
-+EXPORT_SYMBOL(atmel_tc_divisors);
-+
-+#elif defined(CONFIG_ARCH_AT91)
-+/* AT91 has these divide MCK */
-+const u8 atmel_tc_divisors[5] = { 2, 8, 32, 128, 0, };
-+EXPORT_SYMBOL(atmel_tc_divisors);
-+
-+#endif
-+
-+static DEFINE_SPINLOCK(tc_list_lock);
-+static LIST_HEAD(tc_list);
-+
-+/**
-+ * atmel_tc_alloc - allocate a specified TC block
-+ * @block: which block to allocate
-+ * @name: name to be associated with the iomem resource
-+ *
-+ * Caller allocates a block. If it is available, a pointer to a
-+ * pre-initialized struct atmel_tc is returned. The caller can access
-+ * the registers directly through the "regs" field.
-+ */
-+struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
-+{
-+ struct atmel_tc *tc;
-+ struct platform_device *pdev = NULL;
-+ struct resource *r;
-+
-+ spin_lock(&tc_list_lock);
-+ list_for_each_entry(tc, &tc_list, node) {
-+ if (tc->pdev->id == block) {
-+ pdev = tc->pdev;
-+ break;
-+ }
-+ }
-+
-+ if (!pdev || tc->iomem)
-+ goto fail;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ r = request_mem_region(r->start, ATMEL_TC_IOMEM_SIZE, name);
-+ if (!r)
-+ goto fail;
-+
-+ tc->regs = ioremap(r->start, ATMEL_TC_IOMEM_SIZE);
-+ if (!tc->regs)
-+ goto fail_ioremap;
-+
-+ tc->iomem = r;
-+
-+out:
-+ spin_unlock(&tc_list_lock);
-+ return tc;
-+
-+fail_ioremap:
-+ release_resource(r);
-+fail:
-+ tc = NULL;
-+ goto out;
-+}
-+EXPORT_SYMBOL_GPL(atmel_tc_alloc);
-+
-+/**
-+ * atmel_tc_free - release a specified TC block
-+ * @tc: Timer/counter block that was returned by atmel_tc_alloc()
-+ *
-+ * This reverses the effect of atmel_tc_alloc(), unmapping the I/O
-+ * registers, invalidating the resource returned by that routine and
-+ * making the TC available to other drivers.
-+ */
-+void atmel_tc_free(struct atmel_tc *tc)
-+{
-+ spin_lock(&tc_list_lock);
-+ if (tc->regs) {
-+ iounmap(tc->regs);
-+ release_resource(tc->iomem);
-+ tc->regs = NULL;
-+ tc->iomem = NULL;
-+ }
-+ spin_unlock(&tc_list_lock);
-+}
-+EXPORT_SYMBOL_GPL(atmel_tc_free);
-+
-+static int __init tc_probe(struct platform_device *pdev)
-+{
-+ struct atmel_tc *tc;
-+ struct clk *clk;
-+ int irq;
-+
-+ if (!platform_get_resource(pdev, IORESOURCE_MEM, 0))
-+ return -EINVAL;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return -EINVAL;
-+
-+ tc = kzalloc(sizeof(struct atmel_tc), GFP_KERNEL);
-+ if (!tc)
-+ return -ENOMEM;
-+
-+ tc->pdev = pdev;
-+
-+ clk = clk_get(&pdev->dev, "t0_clk");
-+ if (IS_ERR(clk)) {
-+ kfree(tc);
-+ return -EINVAL;
-+ }
-+
-+ tc->clk[0] = clk;
-+ tc->clk[1] = clk_get(&pdev->dev, "t1_clk");
-+ if (IS_ERR(tc->clk[1]))
-+ tc->clk[1] = clk;
-+ tc->clk[2] = clk_get(&pdev->dev, "t2_clk");
-+ if (IS_ERR(tc->clk[2]))
-+ tc->clk[2] = clk;
-+
-+ tc->irq[0] = irq;
-+ tc->irq[1] = platform_get_irq(pdev, 1);
-+ if (tc->irq[1] < 0)
-+ tc->irq[1] = irq;
-+ tc->irq[2] = platform_get_irq(pdev, 2);
-+ if (tc->irq[2] < 0)
-+ tc->irq[2] = irq;
-+
-+ spin_lock(&tc_list_lock);
-+ list_add_tail(&tc->node, &tc_list);
-+ spin_unlock(&tc_list_lock);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver tc_driver = {
-+ .driver.name = "atmel_tcb",
-+};
-+
-+static int __init tc_init(void)
-+{
-+ return platform_driver_probe(&tc_driver, tc_probe);
-+}
-+arch_initcall(tc_init);
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -91,6 +91,16 @@ config MMC_AT91
-
- If unsure, say N.
-
-+config MMC_ATMELMCI
-+ tristate "Atmel Multimedia Card Interface support"
-+ depends on AVR32 && MMC
-+ help
-+ This selects the Atmel Multimedia Card Interface. If you have
-+ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
-+ slot, say Y or M here.
-+
-+ If unsure, say N.
-+
- config MMC_IMX
- tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
- obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
- obj-$(CONFIG_MMC_OMAP) += omap.o
- obj-$(CONFIG_MMC_AT91) += at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
- obj-$(CONFIG_MMC_SPI) += mmc_spi.o
- obj-$(CONFIG_GPIOMMC) += gpiommc.o
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.c
-@@ -0,0 +1,1234 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/blkdev.h>
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/mmc/host.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "atmel-mci.h"
-+
-+#define DRIVER_NAME "atmel_mci"
-+
-+#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
-+ MCI_BIT(OVRE) | MCI_BIT(UNRE))
-+
-+enum {
-+ EVENT_CMD_COMPLETE = 0,
-+ EVENT_DATA_COMPLETE,
-+ EVENT_DATA_ERROR,
-+ EVENT_STOP_SENT,
-+ EVENT_STOP_COMPLETE,
-+ EVENT_DMA_COMPLETE,
-+ EVENT_DMA_ERROR,
-+};
-+
-+struct atmel_mci_dma {
-+ struct dma_request_sg req;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+};
-+
-+struct atmel_mci {
-+ struct mmc_host *mmc;
-+ void __iomem *regs;
-+ struct atmel_mci_dma dma;
-+
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+
-+ u32 cmd_status;
-+ u32 data_status;
-+ u32 stop_status;
-+ u32 stop_cmdr;
-+
-+ struct tasklet_struct tasklet;
-+ unsigned long pending_events;
-+ unsigned long completed_events;
-+
-+ int present;
-+ int detect_pin;
-+ int wp_pin;
-+
-+ /* For detect pin debouncing */
-+ struct timer_list detect_timer;
-+
-+ unsigned long bus_hz;
-+ unsigned long mapbase;
-+ struct clk *mck;
-+ struct platform_device *pdev;
-+
-+ int pending_stop;
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debugfs_root;
-+ struct dentry *debugfs_regs;
-+ struct dentry *debugfs_req;
-+ struct dentry *debugfs_pending_events;
-+ struct dentry *debugfs_completed_events;
-+#endif
-+};
-+
-+/* Those printks take an awful lot of time... */
-+#ifndef DEBUG
-+static unsigned int fmax = 15000000U;
-+#else
-+static unsigned int fmax = 1000000U;
-+#endif
-+module_param(fmax, uint, 0444);
-+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
-+
-+/* Test bit macros for completed events */
-+#define mci_cmd_is_complete(host) \
-+ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_data_is_complete(host) \
-+ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_data_error_is_complete(host) \
-+ test_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_stop_sent_is_complete(host) \
-+ test_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_stop_is_complete(host) \
-+ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_dma_is_complete(host) \
-+ test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
-+#define mci_dma_error_is_complete(host) \
-+ test_bit(EVENT_DMA_ERROR, &host->completed_events)
-+
-+/* Test and clear bit macros for pending events */
-+#define mci_clear_cmd_is_pending(host) \
-+ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_data_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_dma_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+
-+/* Test and set bit macros for completed events */
-+#define mci_set_cmd_is_completed(host) \
-+ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_data_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_dma_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+
-+/* Set bit macros for completed events */
-+#define mci_set_cmd_complete(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_data_complete(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_complete(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_complete(host) \
-+ set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_complete(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_dma_complete(host) \
-+ set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
-+#define mci_set_dma_error_complete(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+
-+/* Set bit macros for pending events */
-+#define mci_set_cmd_pending(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_set_data_pending(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_set_data_error_pending(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_set_stop_sent_pending(host) \
-+ set_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_set_stop_pending(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_set_dma_error_pending(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->pending_events)
-+
-+/* Clear bit macros for pending events */
-+#define mci_clear_cmd_pending(host) \
-+ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_data_pending(host) \
-+ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_pending(host) \
-+ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_pending(host) \
-+ clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_pending(host) \
-+ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_dma_error_pending(host) \
-+ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+
-+#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
-+
-+struct req_dbg_data {
-+ unsigned int nbytes;
-+ char str[DBG_REQ_BUF_SIZE];
-+};
-+
-+static int req_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct atmel_mci *host;
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd, *stop;
-+ struct mmc_data *data;
-+ struct req_dbg_data *priv;
-+ char *str;
-+ unsigned long n = 0;
-+
-+ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+ str = priv->str;
-+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
-+
-+ spin_lock_irq(&host->mmc->lock);
-+ mrq = host->mrq;
-+ if (mrq) {
-+ cmd = mrq->cmd;
-+ data = mrq->data;
-+ stop = mrq->stop;
-+ n = snprintf(str, DBG_REQ_BUF_SIZE,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ cmd->opcode, cmd->arg, cmd->flags,
-+ cmd->resp[0], cmd->resp[1], cmd->resp[2],
-+ cmd->resp[3], cmd->error);
-+ if (n < DBG_REQ_BUF_SIZE && data)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "DATA %u * %u (%u) %x (err %u)\n",
-+ data->blocks, data->blksz,
-+ data->bytes_xfered, data->flags,
-+ data->error);
-+ if (n < DBG_REQ_BUF_SIZE && stop)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ stop->opcode, stop->arg, stop->flags,
-+ stop->resp[0], stop->resp[1],
-+ stop->resp[2], stop->resp[3],
-+ stop->error);
-+ }
-+ spin_unlock_irq(&host->mmc->lock);
-+ mutex_unlock(&inode->i_mutex);
-+
-+ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
-+ file->private_data = priv;
-+
-+ return 0;
-+}
-+
-+static ssize_t req_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct req_dbg_data *priv = file->private_data;
-+
-+ return simple_read_from_buffer(buf, nbytes, ppos,
-+ priv->str, priv->nbytes);
-+}
-+
-+static int req_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+static const struct file_operations req_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = req_dbg_open,
-+ .llseek = no_llseek,
-+ .read = req_dbg_read,
-+ .release = req_dbg_release,
-+};
-+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct atmel_mci *host;
-+ unsigned int i;
-+ u32 *data;
-+ int ret = -ENOMEM;
-+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
-+ data = kmalloc(inode->i_size, GFP_KERNEL);
-+ if (!data)
-+ goto out;
-+
-+ spin_lock_irq(&host->mmc->lock);
-+ for (i = 0; i < inode->i_size / 4; i++)
-+ data[i] = __raw_readl(host->regs + i * 4);
-+ spin_unlock_irq(&host->mmc->lock);
-+
-+ file->private_data = data;
-+ ret = 0;
-+
-+out:
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int ret;
-+
-+ mutex_lock(&inode->i_mutex);
-+ ret = simple_read_from_buffer(buf, nbytes, ppos,
-+ file->private_data,
-+ file->f_dentry->d_inode->i_size);
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+static const struct file_operations regs_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = regs_dbg_open,
-+ .llseek = generic_file_llseek,
-+ .read = regs_dbg_read,
-+ .release = regs_dbg_release,
-+};
-+
-+static void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+ struct mmc_host *mmc;
-+ struct dentry *root, *regs;
-+ struct resource *res;
-+
-+ mmc = host->mmc;
-+ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
-+ if (IS_ERR(root) || !root)
-+ goto err_root;
-+ host->debugfs_root = root;
-+
-+ regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
-+ if (!regs)
-+ goto err_regs;
-+
-+ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-+ regs->d_inode->i_size = res->end - res->start + 1;
-+ host->debugfs_regs = regs;
-+
-+ host->debugfs_req = debugfs_create_file("req", 0400, root,
-+ host, &req_dbg_fops);
-+ if (!host->debugfs_req)
-+ goto err_req;
-+
-+ host->debugfs_pending_events
-+ = debugfs_create_u32("pending_events", 0400, root,
-+ (u32 *)&host->pending_events);
-+ if (!host->debugfs_pending_events)
-+ goto err_pending_events;
-+
-+ host->debugfs_completed_events
-+ = debugfs_create_u32("completed_events", 0400, root,
-+ (u32 *)&host->completed_events);
-+ if (!host->debugfs_completed_events)
-+ goto err_completed_events;
-+
-+ return;
-+
-+err_completed_events:
-+ debugfs_remove(host->debugfs_pending_events);
-+err_pending_events:
-+ debugfs_remove(host->debugfs_req);
-+err_req:
-+ debugfs_remove(host->debugfs_regs);
-+err_regs:
-+ debugfs_remove(host->debugfs_root);
-+err_root:
-+ host->debugfs_root = NULL;
-+ dev_err(&host->pdev->dev,
-+ "failed to initialize debugfs for %s\n",
-+ mmc_hostname(mmc));
-+}
-+
-+static void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+ if (host->debugfs_root) {
-+ debugfs_remove(host->debugfs_completed_events);
-+ debugfs_remove(host->debugfs_pending_events);
-+ debugfs_remove(host->debugfs_req);
-+ debugfs_remove(host->debugfs_regs);
-+ debugfs_remove(host->debugfs_root);
-+ host->debugfs_root = NULL;
-+ }
-+}
-+#else
-+static inline void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+
-+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+#endif /* CONFIG_DEBUG_FS */
-+
-+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
-+ unsigned int ns)
-+{
-+ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
-+}
-+
-+static void atmci_set_timeout(struct atmel_mci *host,
-+ struct mmc_data *data)
-+{
-+ static unsigned dtomul_to_shift[] = {
-+ 0, 4, 7, 8, 10, 12, 16, 20
-+ };
-+ unsigned timeout;
-+ unsigned dtocyc, dtomul;
-+
-+ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
-+
-+ for (dtomul = 0; dtomul < 8; dtomul++) {
-+ unsigned shift = dtomul_to_shift[dtomul];
-+ dtocyc = (timeout + (1 << shift) - 1) >> shift;
-+ if (dtocyc < 15)
-+ break;
-+ }
-+
-+ if (dtomul >= 8) {
-+ dtomul = 7;
-+ dtocyc = 15;
-+ }
-+
-+ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
-+ dtocyc << dtomul_to_shift[dtomul]);
-+ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
-+ | MCI_BF(DTOCYC, dtocyc)));
-+}
-+
-+/*
-+ * Return mask with command flags to be enabled for this command.
-+ */
-+static u32 atmci_prepare_command(struct mmc_host *mmc,
-+ struct mmc_command *cmd)
-+{
-+ u32 cmdr;
-+
-+ cmd->error = 0;
-+
-+ cmdr = MCI_BF(CMDNB, cmd->opcode);
-+
-+ if (cmd->flags & MMC_RSP_PRESENT) {
-+ if (cmd->flags & MMC_RSP_136)
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
-+ else
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
-+ }
-+
-+ /*
-+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
-+ * it's too difficult to determine whether this is an ACMD or
-+ * not. Better make it 64.
-+ */
-+ cmdr |= MCI_BIT(MAXLAT);
-+
-+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
-+ cmdr |= MCI_BIT(OPDCMD);
-+
-+ dev_dbg(&mmc->class_dev,
-+ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
-+ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
-+
-+ return cmdr;
-+}
-+
-+static void atmci_start_command(struct atmel_mci *host,
-+ struct mmc_command *cmd,
-+ u32 cmd_flags)
-+{
-+ WARN_ON(host->cmd);
-+ host->cmd = cmd;
-+
-+ mci_writel(host, ARGR, cmd->arg);
-+ mci_writel(host, CMDR, cmd_flags);
-+
-+ if (cmd->data)
-+ dma_start_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+}
-+
-+/*
-+ * Returns a mask of flags to be set in the command register when the
-+ * command to start the transfer is to be sent.
-+ */
-+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 cmd_flags;
-+
-+ WARN_ON(host->data);
-+ host->data = data;
-+
-+ atmci_set_timeout(host, data);
-+ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
-+ | MCI_BF(BLKLEN, data->blksz)));
-+ host->dma.req.block_size = data->blksz;
-+ host->dma.req.nr_blocks = data->blocks;
-+
-+ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
-+ if (data->flags & MMC_DATA_STREAM)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else if (data->blocks > 1)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ else
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
-+
-+ if (data->flags & MMC_DATA_READ) {
-+ cmd_flags |= MCI_BIT(TRDIR);
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_FROM_DEVICE);
-+ host->dma.req.periph_id = host->dma.rx_periph_id;
-+ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
-+ host->dma.req.data_reg = host->mapbase + MCI_RDR;
-+ } else {
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_TO_DEVICE);
-+ host->dma.req.periph_id = host->dma.tx_periph_id;
-+ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
-+ host->dma.req.data_reg = host->mapbase + MCI_TDR;
-+ }
-+ host->dma.req.sg = data->sg;
-+
-+ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
-+
-+ return cmd_flags;
-+}
-+
-+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_data *data = mrq->data;
-+ u32 iflags;
-+ u32 cmdflags = 0;
-+
-+ iflags = mci_readl(host, IMR);
-+ if (iflags)
-+ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
-+ mci_readl(host, IMR));
-+
-+ WARN_ON(host->mrq != NULL);
-+
-+ /*
-+ * We may "know" the card is gone even though there's still an
-+ * electrical connection. If so, we really need to communicate
-+ * this to the MMC core since there won't be any more
-+ * interrupts as the card is completely removed. Otherwise,
-+ * the MMC core might believe the card is still there even
-+ * though the card was just removed very slowly.
-+ */
-+ if (!host->present) {
-+ mrq->cmd->error = -ENOMEDIUM;
-+ mmc_request_done(mmc, mrq);
-+ return;
-+ }
-+
-+ host->mrq = mrq;
-+ host->pending_events = 0;
-+ host->completed_events = 0;
-+
-+ iflags = MCI_BIT(CMDRDY);
-+ cmdflags = atmci_prepare_command(mmc, mrq->cmd);
-+
-+ if (mrq->stop) {
-+ WARN_ON(!data);
-+
-+ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
-+ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
-+ if (!(data->flags & MMC_DATA_WRITE))
-+ host->stop_cmdr |= MCI_BIT(TRDIR);
-+ if (data->flags & MMC_DATA_STREAM)
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ }
-+ if (data) {
-+ cmdflags |= atmci_prepare_data(mmc, data);
-+ iflags |= MCI_DATA_ERROR_FLAGS;
-+ }
-+
-+ atmci_start_command(host, mrq->cmd, cmdflags);
-+ mci_writel(host, IER, iflags);
-+}
-+
-+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 mr;
-+
-+ if (ios->clock) {
-+ u32 clkdiv;
-+
-+ /* Set clock rate */
-+ clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
-+ if (clkdiv > 255) {
-+ dev_warn(&mmc->class_dev,
-+ "clock %u too slow; using %lu\n",
-+ ios->clock, host->bus_hz / (2 * 256));
-+ clkdiv = 255;
-+ }
-+
-+ mr = mci_readl(host, MR);
-+ mr = MCI_BFINS(CLKDIV, clkdiv, mr)
-+ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
-+ mci_writel(host, MR, mr);
-+
-+ /* Enable the MCI controller */
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ } else {
-+ /* Disable the MCI controller */
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ }
-+
-+ switch (ios->bus_width) {
-+ case MMC_BUS_WIDTH_1:
-+ mci_writel(host, SDCR, 0);
-+ break;
-+ case MMC_BUS_WIDTH_4:
-+ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
-+ break;
-+ }
-+
-+ switch (ios->power_mode) {
-+ case MMC_POWER_ON:
-+ /* Send init sequence (74 clock cycles) */
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
-+ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
-+ cpu_relax();
-+ break;
-+ default:
-+ /*
-+ * TODO: None of the currently available AVR32-based
-+ * boards allow MMC power to be turned off. Implement
-+ * power control when this can be tested properly.
-+ */
-+ break;
-+ }
-+}
-+
-+static int atmci_get_ro(struct mmc_host *mmc)
-+{
-+ int read_only = 0;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ if (host->wp_pin >= 0) {
-+ read_only = gpio_get_value(host->wp_pin);
-+ dev_dbg(&mmc->class_dev, "card is %s\n",
-+ read_only ? "read-only" : "read-write");
-+ } else {
-+ dev_dbg(&mmc->class_dev,
-+ "no pin for checking read-only switch."
-+ " Assuming write-enable.\n");
-+ }
-+
-+ return read_only;
-+}
-+
-+static struct mmc_host_ops atmci_ops = {
-+ .request = atmci_request,
-+ .set_ios = atmci_set_ios,
-+ .get_ro = atmci_get_ro,
-+};
-+
-+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ WARN_ON(host->cmd || host->data);
-+ host->mrq = NULL;
-+
-+ mmc_request_done(mmc, mrq);
-+}
-+
-+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
-+ u32 flags)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
-+ mci_writel(host, IER, MCI_BIT(CMDRDY));
-+}
-+
-+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
-+{
-+ host->data = NULL;
-+ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
-+ ((data->flags & MMC_DATA_WRITE)
-+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
-+
-+ /*
-+ * Data might complete before command for very short transfers
-+ * (like READ_SCR)
-+ */
-+ if (mci_cmd_is_complete(host)
-+ && (!data->stop || mci_stop_is_complete(host)))
-+ atmci_request_end(host->mmc, data->mrq);
-+}
-+
-+static void atmci_command_complete(struct atmel_mci *host,
-+ struct mmc_command *cmd, u32 status)
-+{
-+ if (status & MCI_BIT(RTOE))
-+ cmd->error = -ETIMEDOUT;
-+ else if ((cmd->flags & MMC_RSP_CRC)
-+ && (status & MCI_BIT(RCRCE)))
-+ cmd->error = -EILSEQ;
-+ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
-+ cmd->error = -EIO;
-+
-+ if (cmd->error) {
-+ dev_dbg(&host->mmc->class_dev,
-+ "command error: op=0x%x status=0x%08x\n",
-+ cmd->opcode, status);
-+
-+ if (cmd->data) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ mci_writel(host, IDR, MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS);
-+ host->data = NULL;
-+ }
-+ }
-+}
-+
-+static void atmci_detect_change(unsigned long data)
-+{
-+ struct atmel_mci *host = (struct atmel_mci *)data;
-+ struct mmc_request *mrq = host->mrq;
-+ int present;
-+
-+ /*
-+ * atmci_remove() sets detect_pin to -1 before freeing the
-+ * interrupt. We must not re-enable the interrupt if it has
-+ * been freed.
-+ */
-+ smp_rmb();
-+ if (host->detect_pin < 0)
-+ return;
-+
-+ enable_irq(gpio_to_irq(host->detect_pin));
-+ present = !gpio_get_value(host->detect_pin);
-+
-+ dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
-+ present, host->present);
-+
-+ if (present != host->present) {
-+ dev_dbg(&host->mmc->class_dev, "card %s\n",
-+ present ? "inserted" : "removed");
-+ host->present = present;
-+
-+ /* Reset controller if card is gone */
-+ if (!present) {
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ }
-+
-+ /* Clean up queue if present */
-+ if (mrq) {
-+ if (!mci_cmd_is_complete(host))
-+ mrq->cmd->error = -ENOMEDIUM;
-+ if (mrq->data && !mci_data_is_complete(host)
-+ && !mci_data_error_is_complete(host)) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ host->data->error = -ENOMEDIUM;
-+ atmci_data_complete(host, host->data);
-+ }
-+ if (mrq->stop && !mci_stop_is_complete(host))
-+ mrq->stop->error = -ENOMEDIUM;
-+
-+ host->cmd = NULL;
-+ atmci_request_end(host->mmc, mrq);
-+ }
-+
-+ mmc_detect_change(host->mmc, 0);
-+ }
-+}
-+
-+static void atmci_tasklet_func(unsigned long priv)
-+{
-+ struct mmc_host *mmc = (struct mmc_host *)priv;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_request *mrq = host->mrq;
-+ struct mmc_data *data = host->data;
-+
-+ dev_vdbg(&mmc->class_dev,
-+ "tasklet: pending/completed/mask %lx/%lx/%x\n",
-+ host->pending_events, host->completed_events,
-+ mci_readl(host, IMR));
-+
-+ if (mci_clear_cmd_is_pending(host)) {
-+ mci_set_cmd_complete(host);
-+ atmci_command_complete(host, mrq->cmd, host->cmd_status);
-+ if (!host->data || mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_stop_is_pending(host)) {
-+ mci_set_stop_complete(host);
-+ atmci_command_complete(host, mrq->stop, host->stop_status);
-+ if (mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_dma_error_is_pending(host)) {
-+ mci_set_dma_error_complete(host);
-+ mci_clear_data_pending(host);
-+
-+ /* DMA controller got bus error => invalid address */
-+ data->error = -EIO;
-+
-+ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
-+ host->data->bytes_xfered);
-+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_error_is_pending(host)) {
-+ u32 status = host->data_status;
-+
-+ mci_set_data_error_complete(host);
-+ mci_clear_data_pending(host);
-+
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+
-+ if (status & MCI_BIT(DCRCE)) {
-+ dev_dbg(&mmc->class_dev, "data CRC error\n");
-+ data->error = -EILSEQ;
-+ } else if (status & MCI_BIT(DTOE)) {
-+ dev_dbg(&mmc->class_dev, "data timeout error\n");
-+ data->error = -ETIMEDOUT;
-+ } else {
-+ dev_dbg(&mmc->class_dev, "data FIFO error\n");
-+ data->error = -EIO;
-+ }
-+ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
-+ data->bytes_xfered);
-+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_is_pending(host)) {
-+ mci_set_data_complete(host);
-+ data->bytes_xfered = data->blocks * data->blksz;
-+ atmci_data_complete(host, data);
-+ }
-+ /* See if there is a pending STOP which can be sent */
-+ if (host->pending_stop && mci_cmd_is_complete(host)) {
-+ host->pending_stop = 0;
-+ if (mrq->stop && !mci_set_stop_sent_is_completed(host))
-+ send_stop_cmd(host->mmc, mrq->data, 0);
-+ }
-+}
-+
-+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_command *cmd = host->cmd;
-+
-+ /*
-+ * Read the response now so that we're free to send a new
-+ * command immediately.
-+ */
-+ cmd->resp[0] = mci_readl(host, RSPR);
-+ cmd->resp[1] = mci_readl(host, RSPR);
-+ cmd->resp[2] = mci_readl(host, RSPR);
-+ cmd->resp[3] = mci_readl(host, RSPR);
-+
-+ mci_writel(host, IDR, MCI_BIT(CMDRDY));
-+ host->cmd = NULL;
-+
-+ if (mci_stop_sent_is_complete(host)) {
-+ host->stop_status = status;
-+ mci_set_stop_pending(host);
-+ } else {
-+ struct mmc_request *mrq = host->mrq;
-+
-+ if (mrq->stop && mci_dma_is_complete(host)
-+ && !mci_set_stop_sent_is_completed(host))
-+ send_stop_cmd(host->mmc, mrq->data, 0);
-+ host->cmd_status = status;
-+ mci_set_cmd_pending(host);
-+ }
-+
-+ tasklet_schedule(&host->tasklet);
-+}
-+
-+static void atmci_xfer_complete(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
-+ struct mmc_data *data;
-+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
-+ data = host->data;
-+
-+ /*
-+ * This callback may be called before we see the CMDRDY
-+ * interrupt under heavy irq load (possibly caused by other
-+ * drivers) or when interrupts are disabled for a long time.
-+ */
-+ mci_set_dma_complete(host);
-+
-+ if (data->stop) {
-+ if (!mci_cmd_is_complete(host)) {
-+ /* Just remember a STOP must be sent */
-+ host->pending_stop = 1;
-+ } else if (!mci_set_stop_sent_is_completed(host)) {
-+ send_stop_cmd(host->mmc, data, 0);
-+ host->pending_stop = 0;
-+ }
-+ }
-+
-+ /*
-+ * Regardless of what the documentation says, we have to wait
-+ * for NOTBUSY even after block read operations.
-+ *
-+ * When the DMA transfer is complete, the controller may still
-+ * be reading the CRC from the card, i.e. the data transfer is
-+ * still in progress and we haven't seen all the potential
-+ * error bits yet.
-+ */
-+ mci_writel(host, IER, MCI_BIT(NOTBUSY));
-+}
-+
-+static void atmci_dma_error(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
-+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
-+
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+
-+ mci_set_dma_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+}
-+
-+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 status, mask, pending;
-+
-+ spin_lock(&mmc->lock);
-+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
-+
-+ do {
-+ if (pending & MCI_DATA_ERROR_FLAGS) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ host->data_status = status;
-+ mci_set_data_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ break;
-+ }
-+ if (pending & MCI_BIT(CMDRDY))
-+ atmci_cmd_interrupt(mmc, status);
-+ if (pending & MCI_BIT(NOTBUSY)) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ mci_set_data_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ }
-+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
-+ } while (pending);
-+
-+ spin_unlock(&mmc->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ /*
-+ * Disable interrupts until the pin has stabilized and check
-+ * the state then. Use mod_timer() since we may be in the
-+ * middle of the timer routine when this interrupt triggers.
-+ */
-+ disable_irq_nosync(irq);
-+ mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __devinit atmci_probe(struct platform_device *pdev)
-+{
-+ struct mci_platform_data *board;
-+ struct atmel_mci *host;
-+ struct mmc_host *mmc;
-+ struct resource *regs;
-+ int irq;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ board = pdev->dev.platform_data;
-+
-+ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
-+ if (!mmc)
-+ return -ENOMEM;
-+
-+ host = mmc_priv(mmc);
-+ host->pdev = pdev;
-+ host->mmc = mmc;
-+ if (board) {
-+ host->detect_pin = board->detect_pin;
-+ host->wp_pin = board->wp_pin;
-+ } else {
-+ host->detect_pin = -1;
-+ host->wp_pin = -1;
-+ }
-+
-+ host->mck = clk_get(&pdev->dev, "mci_clk");
-+ if (IS_ERR(host->mck)) {
-+ ret = PTR_ERR(host->mck);
-+ goto out_free_host;
-+ }
-+ clk_enable(host->mck);
-+
-+ ret = -ENOMEM;
-+ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!host->regs)
-+ goto out_disable_clk;
-+
-+ host->bus_hz = clk_get_rate(host->mck);
-+ host->mapbase = regs->start;
-+
-+ mmc->ops = &atmci_ops;
-+ mmc->f_min = (host->bus_hz + 511) / 512;
-+ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
-+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-+ mmc->caps |= MMC_CAP_4_BIT_DATA;
-+
-+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
-+
-+ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
-+ if (ret)
-+ goto out_unmap;
-+
-+ /* Assume card is present if we don't have a detect pin */
-+ host->present = 1;
-+ if (host->detect_pin >= 0) {
-+ if (gpio_request(host->detect_pin, "mmc_detect")) {
-+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
-+ host->detect_pin = -1;
-+ } else {
-+ host->present = !gpio_get_value(host->detect_pin);
-+ }
-+ }
-+ if (host->wp_pin >= 0) {
-+ if (gpio_request(host->wp_pin, "mmc_wp")) {
-+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
-+ host->wp_pin = -1;
-+ }
-+ }
-+
-+ /* TODO: Get this information from platform data */
-+ ret = -ENOMEM;
-+ host->dma.req.req.dmac = find_dma_controller(0);
-+ if (!host->dma.req.req.dmac) {
-+ dev_dbg(&mmc->class_dev, "no DMA controller available\n");
-+ goto out_free_irq;
-+ }
-+ ret = dma_alloc_channel(host->dma.req.req.dmac);
-+ if (ret < 0) {
-+ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
-+ goto out_free_irq;
-+ }
-+ host->dma.req.req.channel = ret;
-+ host->dma.req.width = DMA_WIDTH_32BIT;
-+ host->dma.req.req.xfer_complete = atmci_xfer_complete;
-+ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
-+ host->dma.req.req.error = atmci_dma_error;
-+ host->dma.rx_periph_id = 0;
-+ host->dma.tx_periph_id = 1;
-+
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+
-+ platform_set_drvdata(pdev, host);
-+
-+ mmc_add_host(mmc);
-+
-+ if (host->detect_pin >= 0) {
-+ setup_timer(&host->detect_timer, atmci_detect_change,
-+ (unsigned long)host);
-+
-+ ret = request_irq(gpio_to_irq(host->detect_pin),
-+ atmci_detect_interrupt,
-+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+ DRIVER_NAME, mmc);
-+ if (ret) {
-+ dev_dbg(&mmc->class_dev,
-+ "could not request IRQ %d for detect pin\n",
-+ gpio_to_irq(host->detect_pin));
-+ gpio_free(host->detect_pin);
-+ host->detect_pin = -1;
-+ }
-+ }
-+
-+ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
-+ host->mapbase, irq);
-+
-+ atmci_init_debugfs(host);
-+
-+ return 0;
-+
-+out_free_irq:
-+ if (host->detect_pin >= 0)
-+ gpio_free(host->detect_pin);
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
-+ free_irq(irq, mmc);
-+out_unmap:
-+ iounmap(host->regs);
-+out_disable_clk:
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
-+out_free_host:
-+ mmc_free_host(mmc);
-+ return ret;
-+}
-+
-+static int __devexit atmci_remove(struct platform_device *pdev)
-+{
-+ struct atmel_mci *host = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ if (host) {
-+ atmci_cleanup_debugfs(host);
-+
-+ if (host->detect_pin >= 0) {
-+ int pin = host->detect_pin;
-+
-+ /* Make sure our timer doesn't enable the interrupt */
-+ host->detect_pin = -1;
-+ smp_wmb();
-+
-+ free_irq(gpio_to_irq(pin), host->mmc);
-+ del_timer_sync(&host->detect_timer);
-+ cancel_delayed_work(&host->mmc->detect);
-+ gpio_free(pin);
-+ }
-+
-+ mmc_remove_host(host->mmc);
-+
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ mci_readl(host, SR);
-+
-+ dma_release_channel(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
-+
-+ free_irq(platform_get_irq(pdev, 0), host->mmc);
-+ iounmap(host->regs);
-+
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
-+
-+ mmc_free_host(host->mmc);
-+ }
-+ return 0;
-+}
-+
-+static struct platform_driver atmci_driver = {
-+ .probe = atmci_probe,
-+ .remove = __devexit_p(atmci_remove),
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ },
-+};
-+
-+static int __init atmci_init(void)
-+{
-+ return platform_driver_register(&atmci_driver);
-+}
-+
-+static void __exit atmci_exit(void)
-+{
-+ platform_driver_unregister(&atmci_driver);
-+}
-+
-+module_init(atmci_init);
-+module_exit(atmci_exit);
-+
-+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.h
-@@ -0,0 +1,192 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
-+#define __DRIVERS_MMC_ATMEL_MCI_H__
-+
-+/* MCI register offsets */
-+#define MCI_CR 0x0000
-+#define MCI_MR 0x0004
-+#define MCI_DTOR 0x0008
-+#define MCI_SDCR 0x000c
-+#define MCI_ARGR 0x0010
-+#define MCI_CMDR 0x0014
-+#define MCI_BLKR 0x0018
-+#define MCI_RSPR 0x0020
-+#define MCI_RSPR1 0x0024
-+#define MCI_RSPR2 0x0028
-+#define MCI_RSPR3 0x002c
-+#define MCI_RDR 0x0030
-+#define MCI_TDR 0x0034
-+#define MCI_SR 0x0040
-+#define MCI_IER 0x0044
-+#define MCI_IDR 0x0048
-+#define MCI_IMR 0x004c
-+
-+/* Bitfields in CR */
-+#define MCI_MCIEN_OFFSET 0
-+#define MCI_MCIEN_SIZE 1
-+#define MCI_MCIDIS_OFFSET 1
-+#define MCI_MCIDIS_SIZE 1
-+#define MCI_PWSEN_OFFSET 2
-+#define MCI_PWSEN_SIZE 1
-+#define MCI_PWSDIS_OFFSET 3
-+#define MCI_PWSDIS_SIZE 1
-+#define MCI_SWRST_OFFSET 7
-+#define MCI_SWRST_SIZE 1
-+
-+/* Bitfields in MR */
-+#define MCI_CLKDIV_OFFSET 0
-+#define MCI_CLKDIV_SIZE 8
-+#define MCI_PWSDIV_OFFSET 8
-+#define MCI_PWSDIV_SIZE 3
-+#define MCI_RDPROOF_OFFSET 11
-+#define MCI_RDPROOF_SIZE 1
-+#define MCI_WRPROOF_OFFSET 12
-+#define MCI_WRPROOF_SIZE 1
-+#define MCI_DMAPADV_OFFSET 14
-+#define MCI_DMAPADV_SIZE 1
-+#define MCI_BLKLEN_OFFSET 16
-+#define MCI_BLKLEN_SIZE 16
-+
-+/* Bitfields in DTOR */
-+#define MCI_DTOCYC_OFFSET 0
-+#define MCI_DTOCYC_SIZE 4
-+#define MCI_DTOMUL_OFFSET 4
-+#define MCI_DTOMUL_SIZE 3
-+
-+/* Bitfields in SDCR */
-+#define MCI_SDCSEL_OFFSET 0
-+#define MCI_SDCSEL_SIZE 4
-+#define MCI_SDCBUS_OFFSET 7
-+#define MCI_SDCBUS_SIZE 1
-+
-+/* Bitfields in ARGR */
-+#define MCI_ARG_OFFSET 0
-+#define MCI_ARG_SIZE 32
-+
-+/* Bitfields in CMDR */
-+#define MCI_CMDNB_OFFSET 0
-+#define MCI_CMDNB_SIZE 6
-+#define MCI_RSPTYP_OFFSET 6
-+#define MCI_RSPTYP_SIZE 2
-+#define MCI_SPCMD_OFFSET 8
-+#define MCI_SPCMD_SIZE 3
-+#define MCI_OPDCMD_OFFSET 11
-+#define MCI_OPDCMD_SIZE 1
-+#define MCI_MAXLAT_OFFSET 12
-+#define MCI_MAXLAT_SIZE 1
-+#define MCI_TRCMD_OFFSET 16
-+#define MCI_TRCMD_SIZE 2
-+#define MCI_TRDIR_OFFSET 18
-+#define MCI_TRDIR_SIZE 1
-+#define MCI_TRTYP_OFFSET 19
-+#define MCI_TRTYP_SIZE 2
-+
-+/* Bitfields in BLKR */
-+#define MCI_BCNT_OFFSET 0
-+#define MCI_BCNT_SIZE 16
-+
-+/* Bitfields in RSPRn */
-+#define MCI_RSP_OFFSET 0
-+#define MCI_RSP_SIZE 32
-+
-+/* Bitfields in SR/IER/IDR/IMR */
-+#define MCI_CMDRDY_OFFSET 0
-+#define MCI_CMDRDY_SIZE 1
-+#define MCI_RXRDY_OFFSET 1
-+#define MCI_RXRDY_SIZE 1
-+#define MCI_TXRDY_OFFSET 2
-+#define MCI_TXRDY_SIZE 1
-+#define MCI_BLKE_OFFSET 3
-+#define MCI_BLKE_SIZE 1
-+#define MCI_DTIP_OFFSET 4
-+#define MCI_DTIP_SIZE 1
-+#define MCI_NOTBUSY_OFFSET 5
-+#define MCI_NOTBUSY_SIZE 1
-+#define MCI_ENDRX_OFFSET 6
-+#define MCI_ENDRX_SIZE 1
-+#define MCI_ENDTX_OFFSET 7
-+#define MCI_ENDTX_SIZE 1
-+#define MCI_RXBUFF_OFFSET 14
-+#define MCI_RXBUFF_SIZE 1
-+#define MCI_TXBUFE_OFFSET 15
-+#define MCI_TXBUFE_SIZE 1
-+#define MCI_RINDE_OFFSET 16
-+#define MCI_RINDE_SIZE 1
-+#define MCI_RDIRE_OFFSET 17
-+#define MCI_RDIRE_SIZE 1
-+#define MCI_RCRCE_OFFSET 18
-+#define MCI_RCRCE_SIZE 1
-+#define MCI_RENDE_OFFSET 19
-+#define MCI_RENDE_SIZE 1
-+#define MCI_RTOE_OFFSET 20
-+#define MCI_RTOE_SIZE 1
-+#define MCI_DCRCE_OFFSET 21
-+#define MCI_DCRCE_SIZE 1
-+#define MCI_DTOE_OFFSET 22
-+#define MCI_DTOE_SIZE 1
-+#define MCI_OVRE_OFFSET 30
-+#define MCI_OVRE_SIZE 1
-+#define MCI_UNRE_OFFSET 31
-+#define MCI_UNRE_SIZE 1
-+
-+/* Constants for DTOMUL */
-+#define MCI_DTOMUL_1_CYCLE 0
-+#define MCI_DTOMUL_16_CYCLES 1
-+#define MCI_DTOMUL_128_CYCLES 2
-+#define MCI_DTOMUL_256_CYCLES 3
-+#define MCI_DTOMUL_1024_CYCLES 4
-+#define MCI_DTOMUL_4096_CYCLES 5
-+#define MCI_DTOMUL_65536_CYCLES 6
-+#define MCI_DTOMUL_1048576_CYCLES 7
-+
-+/* Constants for RSPTYP */
-+#define MCI_RSPTYP_NO_RESP 0
-+#define MCI_RSPTYP_48_BIT 1
-+#define MCI_RSPTYP_136_BIT 2
-+
-+/* Constants for SPCMD */
-+#define MCI_SPCMD_NO_SPEC_CMD 0
-+#define MCI_SPCMD_INIT_CMD 1
-+#define MCI_SPCMD_SYNC_CMD 2
-+#define MCI_SPCMD_INT_CMD 4
-+#define MCI_SPCMD_INT_RESP 5
-+
-+/* Constants for TRCMD */
-+#define MCI_TRCMD_NO_TRANS 0
-+#define MCI_TRCMD_START_TRANS 1
-+#define MCI_TRCMD_STOP_TRANS 2
-+
-+/* Constants for TRTYP */
-+#define MCI_TRTYP_BLOCK 0
-+#define MCI_TRTYP_MULTI_BLOCK 1
-+#define MCI_TRTYP_STREAM 2
-+
-+/* Bit manipulation macros */
-+#define MCI_BIT(name) \
-+ (1 << MCI_##name##_OFFSET)
-+#define MCI_BF(name,value) \
-+ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
-+ << MCI_##name##_OFFSET)
-+#define MCI_BFEXT(name,value) \
-+ (((value) >> MCI_##name##_OFFSET) \
-+ & ((1 << MCI_##name##_SIZE) - 1))
-+#define MCI_BFINS(name,value,old) \
-+ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
-+ << MCI_##name##_OFFSET)) \
-+ | MCI_BF(name,value))
-+
-+/* Register access macros */
-+#define mci_readl(port,reg) \
-+ __raw_readl((port)->regs + MCI_##reg)
-+#define mci_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + MCI_##reg)
-+
-+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -272,12 +272,54 @@ config MTD_NAND_CS553X
-
- If you say "m", the module will be called "cs553x_nand.ko".
-
--config MTD_NAND_AT91
-- bool "Support for NAND Flash / SmartMedia on AT91"
-- depends on ARCH_AT91
-+config MTD_NAND_ATMEL
-+ bool "Support for NAND Flash / SmartMedia on AT91 and AVR32"
-+ depends on ARCH_AT91 || AVR32
- help
- Enables support for NAND Flash / Smart Media Card interface
-- on Atmel AT91 processors.
-+ on Atmel AT91 and AVR32 processors.
-+choice
-+ prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
-+ depends on MTD_NAND_ATMEL
-+
-+config MTD_NAND_ATMEL_ECC_HW
-+ bool "Hardware ECC"
-+ depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
-+ help
-+ Use hardware ECC instead of software ECC when the chip
-+ supports it.
-+
-+ The hardware ECC controller is capable of single bit error
-+ correction and 2-bit random detection per page.
-+
-+ NB : hardware and software ECC schemes are incompatible.
-+ If you switch from one to another, you'll have to erase your
-+ mtd partition.
-+
-+ If unsure, say Y
-+
-+config MTD_NAND_ATMEL_ECC_SOFT
-+ bool "Software ECC"
-+ help
-+ Use software ECC.
-+
-+ NB : hardware and software ECC schemes are incompatible.
-+ If you switch from one to another, you'll have to erase your
-+ mtd partition.
-+
-+config MTD_NAND_ATMEL_ECC_NONE
-+ bool "No ECC (testing only, DANGEROUS)"
-+ depends on DEBUG_KERNEL
-+ help
-+ No ECC will be used.
-+ It's not a good idea and it should be reserved for testing
-+ purpose only.
-+
-+ If unsure, say N
-+
-+ endchoice
-+
-+endchoice
-
- config MTD_NAND_CM_X270
- tristate "Support for NAND Flash on CM-X270 modules"
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -24,7 +24,7 @@ obj-$(CONFIG_MTD_NAND_TS7250) += ts7250
- obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
- obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
- obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
--obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
-+obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
- obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
- obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
---- a/drivers/mtd/nand/at91_nand.c
-+++ /dev/null
-@@ -1,236 +0,0 @@
--/*
-- * drivers/mtd/nand/at91_nand.c
-- *
-- * Copyright (C) 2003 Rick Bronson
-- *
-- * Derived from drivers/mtd/nand/autcpu12.c
-- * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
-- *
-- * Derived from drivers/mtd/spia.c
-- * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- */
--
--#include <linux/slab.h>
--#include <linux/module.h>
--#include <linux/platform_device.h>
--#include <linux/mtd/mtd.h>
--#include <linux/mtd/nand.h>
--#include <linux/mtd/partitions.h>
--
--#include <asm/io.h>
--#include <asm/sizes.h>
--
--#include <asm/hardware.h>
--#include <asm/arch/board.h>
--#include <asm/arch/gpio.h>
--
--struct at91_nand_host {
-- struct nand_chip nand_chip;
-- struct mtd_info mtd;
-- void __iomem *io_base;
-- struct at91_nand_data *board;
--};
--
--/*
-- * Hardware specific access to control-lines
-- */
--static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
--{
-- struct nand_chip *nand_chip = mtd->priv;
-- struct at91_nand_host *host = nand_chip->priv;
--
-- if (cmd == NAND_CMD_NONE)
-- return;
--
-- if (ctrl & NAND_CLE)
-- writeb(cmd, host->io_base + (1 << host->board->cle));
-- else
-- writeb(cmd, host->io_base + (1 << host->board->ale));
--}
--
--/*
-- * Read the Device Ready pin.
-- */
--static int at91_nand_device_ready(struct mtd_info *mtd)
--{
-- struct nand_chip *nand_chip = mtd->priv;
-- struct at91_nand_host *host = nand_chip->priv;
--
-- return at91_get_gpio_value(host->board->rdy_pin);
--}
--
--/*
-- * Enable NAND.
-- */
--static void at91_nand_enable(struct at91_nand_host *host)
--{
-- if (host->board->enable_pin)
-- at91_set_gpio_value(host->board->enable_pin, 0);
--}
--
--/*
-- * Disable NAND.
-- */
--static void at91_nand_disable(struct at91_nand_host *host)
--{
-- if (host->board->enable_pin)
-- at91_set_gpio_value(host->board->enable_pin, 1);
--}
--
--#ifdef CONFIG_MTD_PARTITIONS
--const char *part_probes[] = { "cmdlinepart", NULL };
--#endif
--
--/*
-- * Probe for the NAND device.
-- */
--static int __init at91_nand_probe(struct platform_device *pdev)
--{
-- struct at91_nand_host *host;
-- struct mtd_info *mtd;
-- struct nand_chip *nand_chip;
-- int res;
--
--#ifdef CONFIG_MTD_PARTITIONS
-- struct mtd_partition *partitions = NULL;
-- int num_partitions = 0;
--#endif
--
-- /* Allocate memory for the device structure (and zero it) */
-- host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
-- if (!host) {
-- printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
-- return -ENOMEM;
-- }
--
-- host->io_base = ioremap(pdev->resource[0].start,
-- pdev->resource[0].end - pdev->resource[0].start + 1);
-- if (host->io_base == NULL) {
-- printk(KERN_ERR "at91_nand: ioremap failed\n");
-- kfree(host);
-- return -EIO;
-- }
--
-- mtd = &host->mtd;
-- nand_chip = &host->nand_chip;
-- host->board = pdev->dev.platform_data;
--
-- nand_chip->priv = host; /* link the private data structures */
-- mtd->priv = nand_chip;
-- mtd->owner = THIS_MODULE;
--
-- /* Set address of NAND IO lines */
-- nand_chip->IO_ADDR_R = host->io_base;
-- nand_chip->IO_ADDR_W = host->io_base;
-- nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
--
-- if (host->board->rdy_pin)
-- nand_chip->dev_ready = at91_nand_device_ready;
--
-- nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
-- nand_chip->chip_delay = 20; /* 20us command delay time */
--
-- if (host->board->bus_width_16) /* 16-bit bus width */
-- nand_chip->options |= NAND_BUSWIDTH_16;
--
-- platform_set_drvdata(pdev, host);
-- at91_nand_enable(host);
--
-- if (host->board->det_pin) {
-- if (at91_get_gpio_value(host->board->det_pin)) {
-- printk ("No SmartMedia card inserted.\n");
-- res = ENXIO;
-- goto out;
-- }
-- }
--
-- /* Scan to find existance of the device */
-- if (nand_scan(mtd, 1)) {
-- res = -ENXIO;
-- goto out;
-- }
--
--#ifdef CONFIG_MTD_PARTITIONS
--#ifdef CONFIG_MTD_CMDLINE_PARTS
-- mtd->name = "at91_nand";
-- num_partitions = parse_mtd_partitions(mtd, part_probes,
-- &partitions, 0);
--#endif
-- if (num_partitions <= 0 && host->board->partition_info)
-- partitions = host->board->partition_info(mtd->size,
-- &num_partitions);
--
-- if ((!partitions) || (num_partitions == 0)) {
-- printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
-- res = ENXIO;
-- goto release;
-- }
--
-- res = add_mtd_partitions(mtd, partitions, num_partitions);
--#else
-- res = add_mtd_device(mtd);
--#endif
--
-- if (!res)
-- return res;
--
--release:
-- nand_release(mtd);
--out:
-- at91_nand_disable(host);
-- platform_set_drvdata(pdev, NULL);
-- iounmap(host->io_base);
-- kfree(host);
-- return res;
--}
--
--/*
-- * Remove a NAND device.
-- */
--static int __devexit at91_nand_remove(struct platform_device *pdev)
--{
-- struct at91_nand_host *host = platform_get_drvdata(pdev);
-- struct mtd_info *mtd = &host->mtd;
--
-- nand_release(mtd);
--
-- at91_nand_disable(host);
--
-- iounmap(host->io_base);
-- kfree(host);
--
-- return 0;
--}
--
--static struct platform_driver at91_nand_driver = {
-- .probe = at91_nand_probe,
-- .remove = at91_nand_remove,
-- .driver = {
-- .name = "at91_nand",
-- .owner = THIS_MODULE,
-- },
--};
--
--static int __init at91_nand_init(void)
--{
-- return platform_driver_register(&at91_nand_driver);
--}
--
--
--static void __exit at91_nand_exit(void)
--{
-- platform_driver_unregister(&at91_nand_driver);
--}
--
--
--module_init(at91_nand_init);
--module_exit(at91_nand_exit);
--
--MODULE_LICENSE("GPL");
--MODULE_AUTHOR("Rick Bronson");
--MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
---- /dev/null
-+++ b/drivers/mtd/nand/atmel_nand.c
-@@ -0,0 +1,650 @@
-+/*
-+ * Copyright (C) 2003 Rick Bronson
-+ *
-+ * Derived from drivers/mtd/nand/autcpu12.c
-+ * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
-+ *
-+ * Derived from drivers/mtd/spia.c
-+ * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
-+ *
-+ *
-+ * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
-+ * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
-+ *
-+ * Derived from Das U-Boot source code
-+ * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
-+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <linux/gpio.h>
-+#include <linux/io.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
-+
-+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
-+#define hard_ecc 1
-+#else
-+#define hard_ecc 0
-+#endif
-+
-+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
-+#define no_ecc 1
-+#else
-+#define no_ecc 0
-+#endif
-+
-+/* Register access macros */
-+#define ecc_readl(add, reg) \
-+ __raw_readl(add + ATMEL_ECC_##reg)
-+#define ecc_writel(add, reg, value) \
-+ __raw_writel((value), add + ATMEL_ECC_##reg)
-+
-+#include "atmel_nand_ecc.h" /* Hardware ECC registers */
-+
-+/* oob layout for large page size
-+ * bad block info is on bytes 0 and 1
-+ * the bytes have to be consecutives to avoid
-+ * several NAND_CMD_RNDOUT during read
-+ */
-+static struct nand_ecclayout atmel_oobinfo_large = {
-+ .eccbytes = 4,
-+ .eccpos = {60, 61, 62, 63},
-+ .oobfree = {
-+ {2, 58}
-+ },
-+};
-+
-+/* oob layout for small page size
-+ * bad block info is on bytes 4 and 5
-+ * the bytes have to be consecutives to avoid
-+ * several NAND_CMD_RNDOUT during read
-+ */
-+static struct nand_ecclayout atmel_oobinfo_small = {
-+ .eccbytes = 4,
-+ .eccpos = {0, 1, 2, 3},
-+ .oobfree = {
-+ {6, 10}
-+ },
-+};
-+
-+struct atmel_nand_host {
-+ struct nand_chip nand_chip;
-+ struct mtd_info mtd;
-+ void __iomem *io_base;
-+ struct atmel_nand_data *board;
-+ struct device *dev;
-+ void __iomem *ecc;
-+};
-+
-+/*
-+ * Enable NAND.
-+ */
-+static void atmel_nand_enable(struct atmel_nand_host *host)
-+{
-+ if (host->board->enable_pin)
-+ gpio_set_value(host->board->enable_pin, 0);
-+}
-+
-+/*
-+ * Disable NAND.
-+ */
-+static void atmel_nand_disable(struct atmel_nand_host *host)
-+{
-+ if (host->board->enable_pin)
-+ gpio_set_value(host->board->enable_pin, 1);
-+}
-+
-+/*
-+ * Hardware specific access to control-lines
-+ */
-+static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+ struct atmel_nand_host *host = nand_chip->priv;
-+
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ if (ctrl & NAND_NCE)
-+ atmel_nand_enable(host);
-+ else
-+ atmel_nand_disable(host);
-+ }
-+ if (cmd == NAND_CMD_NONE)
-+ return;
-+
-+ if (ctrl & NAND_CLE)
-+ writeb(cmd, host->io_base + (1 << host->board->cle));
-+ else
-+ writeb(cmd, host->io_base + (1 << host->board->ale));
-+}
-+
-+/*
-+ * Read the Device Ready pin.
-+ */
-+static int atmel_nand_device_ready(struct mtd_info *mtd)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+ struct atmel_nand_host *host = nand_chip->priv;
-+
-+ return gpio_get_value(host->board->rdy_pin);
-+}
-+
-+/*
-+ * Minimal-overhead PIO for data access.
-+ */
-+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-+}
-+
-+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-+}
-+
-+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-+}
-+
-+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+
-+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-+}
-+
-+/*
-+ * write oob for small pages
-+ */
-+static int atmel_nand_write_oob_512(struct mtd_info *mtd,
-+ struct nand_chip *chip, int page)
-+{
-+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-+ int eccsize = chip->ecc.size, length = mtd->oobsize;
-+ int len, pos, status = 0;
-+ const uint8_t *bufpoi = chip->oob_poi;
-+
-+ pos = eccsize + chunk;
-+
-+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-+ len = min_t(int, length, chunk);
-+ chip->write_buf(mtd, bufpoi, len);
-+ bufpoi += len;
-+ length -= len;
-+ if (length > 0)
-+ chip->write_buf(mtd, bufpoi, length);
-+
-+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-+ status = chip->waitfunc(mtd, chip);
-+
-+ return status & NAND_STATUS_FAIL ? -EIO : 0;
-+
-+}
-+
-+/*
-+ * read oob for small pages
-+ */
-+static int atmel_nand_read_oob_512(struct mtd_info *mtd,
-+ struct nand_chip *chip, int page, int sndcmd)
-+{
-+ if (sndcmd) {
-+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-+ sndcmd = 0;
-+ }
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ return sndcmd;
-+}
-+
-+/*
-+ * Calculate HW ECC
-+ *
-+ * function called after a write
-+ *
-+ * mtd: MTD block structure
-+ * dat: raw data (unused)
-+ * ecc_code: buffer for ECC
-+ */
-+static int atmel_nand_calculate(struct mtd_info *mtd,
-+ const u_char *dat, unsigned char *ecc_code)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+ struct atmel_nand_host *host = nand_chip->priv;
-+ uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
-+ unsigned int ecc_value;
-+
-+ /* get the first 2 ECC bytes */
-+ ecc_value = ecc_readl(host->ecc, PR);
-+
-+ ecc_code[eccpos[0]] = ecc_value & 0xFF;
-+ ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
-+
-+ /* get the last 2 ECC bytes */
-+ ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
-+
-+ ecc_code[eccpos[2]] = ecc_value & 0xFF;
-+ ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
-+
-+ return 0;
-+}
-+
-+/*
-+ * HW ECC read page function
-+ *
-+ * mtd: mtd info structure
-+ * chip: nand chip info structure
-+ * buf: buffer to store read data
-+ */
-+static int atmel_nand_read_page(struct mtd_info *mtd,
-+ struct nand_chip *chip, uint8_t *buf)
-+{
-+ int eccsize = chip->ecc.size;
-+ int eccbytes = chip->ecc.bytes;
-+ uint32_t *eccpos = chip->ecc.layout->eccpos;
-+ uint8_t *p = buf;
-+ uint8_t *oob = chip->oob_poi;
-+ uint8_t *ecc_pos;
-+ int stat;
-+
-+ /*
-+ * Errata: ALE is incorrectly wired up to the ECC controller
-+ * on the AP7000, so it will include the address cycles in the
-+ * ECC calculation.
-+ *
-+ * Workaround: Reset the parity registers before reading the
-+ * actual data.
-+ */
-+ if (cpu_is_at32ap7000()) {
-+ struct atmel_nand_host *host = chip->priv;
-+ ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
-+ }
-+
-+ /* read the page */
-+ chip->read_buf(mtd, p, eccsize);
-+
-+ /* move to ECC position if needed */
-+ if (eccpos[0] != 0) {
-+ /* This only works on large pages
-+ * because the ECC controller waits for
-+ * NAND_CMD_RNDOUTSTART after the
-+ * NAND_CMD_RNDOUT.
-+ * anyway, for small pages, the eccpos[0] == 0
-+ */
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-+ mtd->writesize + eccpos[0], -1);
-+ }
-+
-+ /* the ECC controller needs to read the ECC just after the data */
-+ ecc_pos = oob + eccpos[0];
-+ chip->read_buf(mtd, ecc_pos, eccbytes);
-+
-+ /* check if there's an error */
-+ stat = chip->ecc.correct(mtd, p, oob, NULL);
-+
-+ if (stat < 0)
-+ mtd->ecc_stats.failed++;
-+ else
-+ mtd->ecc_stats.corrected += stat;
-+
-+ /* get back to oob start (end of page) */
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
-+
-+ /* read the oob */
-+ chip->read_buf(mtd, oob, mtd->oobsize);
-+
-+ return 0;
-+}
-+
-+/*
-+ * HW ECC Correction
-+ *
-+ * function called after a read
-+ *
-+ * mtd: MTD block structure
-+ * dat: raw data read from the chip
-+ * read_ecc: ECC from the chip (unused)
-+ * isnull: unused
-+ *
-+ * Detect and correct a 1 bit error for a page
-+ */
-+static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
-+ u_char *read_ecc, u_char *isnull)
-+{
-+ struct nand_chip *nand_chip = mtd->priv;
-+ struct atmel_nand_host *host = nand_chip->priv;
-+ unsigned int ecc_status;
-+ unsigned int ecc_word, ecc_bit;
-+
-+ /* get the status from the Status Register */
-+ ecc_status = ecc_readl(host->ecc, SR);
-+
-+ /* if there's no error */
-+ if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
-+ return 0;
-+
-+ /* get error bit offset (4 bits) */
-+ ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
-+ /* get word address (12 bits) */
-+ ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
-+ ecc_word >>= 4;
-+
-+ /* if there are multiple errors */
-+ if (ecc_status & ATMEL_ECC_MULERR) {
-+ /* check if it is a freshly erased block
-+ * (filled with 0xff) */
-+ if ((ecc_bit == ATMEL_ECC_BITADDR)
-+ && (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
-+ /* the block has just been erased, return OK */
-+ return 0;
-+ }
-+ /* it doesn't seems to be a freshly
-+ * erased block.
-+ * We can't correct so many errors */
-+ dev_dbg(host->dev, "atmel_nand : multiple errors detected."
-+ " Unable to correct.\n");
-+ return -EIO;
-+ }
-+
-+ /* if there's a single bit error : we can correct it */
-+ if (ecc_status & ATMEL_ECC_ECCERR) {
-+ /* there's nothing much to do here.
-+ * the bit error is on the ECC itself.
-+ */
-+ dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
-+ " Nothing to correct\n");
-+ return 0;
-+ }
-+
-+ dev_dbg(host->dev, "atmel_nand : one bit error on data."
-+ " (word offset in the page :"
-+ " 0x%x bit offset : 0x%x)\n",
-+ ecc_word, ecc_bit);
-+ /* correct the error */
-+ if (nand_chip->options & NAND_BUSWIDTH_16) {
-+ /* 16 bits words */
-+ ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
-+ } else {
-+ /* 8 bits words */
-+ dat[ecc_word] ^= (1 << ecc_bit);
-+ }
-+ dev_dbg(host->dev, "atmel_nand : error corrected\n");
-+ return 1;
-+}
-+
-+/*
-+ * Enable HW ECC : unused on most chips
-+ */
-+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
-+{
-+ if (cpu_is_at32ap7000()) {
-+ struct nand_chip *nand_chip = mtd->priv;
-+ struct atmel_nand_host *host = nand_chip->priv;
-+ ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
-+ }
-+}
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static const char *part_probes[] = { "cmdlinepart", NULL };
-+#endif
-+
-+/*
-+ * Probe for the NAND device.
-+ */
-+static int __init atmel_nand_probe(struct platform_device *pdev)
-+{
-+ struct atmel_nand_host *host;
-+ struct mtd_info *mtd;
-+ struct nand_chip *nand_chip;
-+ struct resource *regs;
-+ struct resource *mem;
-+ int res;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+ struct mtd_partition *partitions = NULL;
-+ int num_partitions = 0;
-+#endif
-+
-+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!mem) {
-+ printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
-+ return -ENXIO;
-+ }
-+
-+ /* Allocate memory for the device structure (and zero it) */
-+ host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
-+ if (!host) {
-+ printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
-+ return -ENOMEM;
-+ }
-+
-+ host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
-+ if (host->io_base == NULL) {
-+ printk(KERN_ERR "atmel_nand: ioremap failed\n");
-+ res = -EIO;
-+ goto err_nand_ioremap;
-+ }
-+
-+ mtd = &host->mtd;
-+ nand_chip = &host->nand_chip;
-+ host->board = pdev->dev.platform_data;
-+ host->dev = &pdev->dev;
-+
-+ nand_chip->priv = host; /* link the private data structures */
-+ mtd->priv = nand_chip;
-+ mtd->owner = THIS_MODULE;
-+
-+ /* Set address of NAND IO lines */
-+ nand_chip->IO_ADDR_R = host->io_base;
-+ nand_chip->IO_ADDR_W = host->io_base;
-+ nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
-+
-+ if (host->board->rdy_pin)
-+ nand_chip->dev_ready = atmel_nand_device_ready;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (!regs && hard_ecc) {
-+ printk(KERN_ERR "atmel_nand: can't get I/O resource "
-+ "regs\nFalling back on software ECC\n");
-+ }
-+
-+ nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
-+ if (no_ecc)
-+ nand_chip->ecc.mode = NAND_ECC_NONE;
-+ if (hard_ecc && regs) {
-+ host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (host->ecc == NULL) {
-+ printk(KERN_ERR "atmel_nand: ioremap failed\n");
-+ res = -EIO;
-+ goto err_ecc_ioremap;
-+ }
-+ nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-+ nand_chip->ecc.calculate = atmel_nand_calculate;
-+ nand_chip->ecc.correct = atmel_nand_correct;
-+ nand_chip->ecc.hwctl = atmel_nand_hwctl;
-+ nand_chip->ecc.read_page = atmel_nand_read_page;
-+ nand_chip->ecc.bytes = 4;
-+ nand_chip->ecc.prepad = 0;
-+ nand_chip->ecc.postpad = 0;
-+ }
-+
-+ nand_chip->chip_delay = 20; /* 20us command delay time */
-+
-+ if (host->board->bus_width_16) { /* 16-bit bus width */
-+ nand_chip->options |= NAND_BUSWIDTH_16;
-+ nand_chip->read_buf = atmel_read_buf16;
-+ nand_chip->write_buf = atmel_write_buf16;
-+ } else {
-+ nand_chip->read_buf = atmel_read_buf;
-+ nand_chip->write_buf = atmel_write_buf;
-+ }
-+
-+ platform_set_drvdata(pdev, host);
-+ atmel_nand_enable(host);
-+
-+ if (host->board->det_pin) {
-+ if (gpio_get_value(host->board->det_pin)) {
-+ printk("No SmartMedia card inserted.\n");
-+ res = ENXIO;
-+ goto err_no_card;
-+ }
-+ }
-+
-+ /* first scan to find the device and get the page size */
-+ if (nand_scan_ident(mtd, 1)) {
-+ res = -ENXIO;
-+ goto err_scan_ident;
-+ }
-+
-+ if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
-+ /* ECC is calculated for the whole page (1 step) */
-+ nand_chip->ecc.size = mtd->writesize;
-+
-+ /* set ECC page size and oob layout */
-+ switch (mtd->writesize) {
-+ case 512:
-+ nand_chip->ecc.layout = &atmel_oobinfo_small;
-+ nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
-+ nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
-+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
-+ break;
-+ case 1024:
-+ nand_chip->ecc.layout = &atmel_oobinfo_large;
-+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
-+ break;
-+ case 2048:
-+ nand_chip->ecc.layout = &atmel_oobinfo_large;
-+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
-+ break;
-+ case 4096:
-+ nand_chip->ecc.layout = &atmel_oobinfo_large;
-+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
-+ break;
-+ default:
-+ /* page size not handled by HW ECC */
-+ /* switching back to soft ECC */
-+ nand_chip->ecc.mode = NAND_ECC_SOFT;
-+ nand_chip->ecc.calculate = NULL;
-+ nand_chip->ecc.correct = NULL;
-+ nand_chip->ecc.hwctl = NULL;
-+ nand_chip->ecc.read_page = NULL;
-+ nand_chip->ecc.postpad = 0;
-+ nand_chip->ecc.prepad = 0;
-+ nand_chip->ecc.bytes = 0;
-+ break;
-+ }
-+ }
-+
-+ /* second phase scan */
-+ if (nand_scan_tail(mtd)) {
-+ res = -ENXIO;
-+ goto err_scan_tail;
-+ }
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+ mtd->name = "atmel_nand";
-+ num_partitions = parse_mtd_partitions(mtd, part_probes,
-+ &partitions, 0);
-+#endif
-+ if (num_partitions <= 0 && host->board->partition_info)
-+ partitions = host->board->partition_info(mtd->size,
-+ &num_partitions);
-+
-+ if ((!partitions) || (num_partitions == 0)) {
-+ printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
-+ res = ENXIO;
-+ goto err_no_partitions;
-+ }
-+
-+ res = add_mtd_partitions(mtd, partitions, num_partitions);
-+#else
-+ res = add_mtd_device(mtd);
-+#endif
-+
-+ if (!res)
-+ return res;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+err_no_partitions:
-+#endif
-+ nand_release(mtd);
-+err_scan_tail:
-+err_scan_ident:
-+err_no_card:
-+ atmel_nand_disable(host);
-+ platform_set_drvdata(pdev, NULL);
-+ if (host->ecc)
-+ iounmap(host->ecc);
-+err_ecc_ioremap:
-+ iounmap(host->io_base);
-+err_nand_ioremap:
-+ kfree(host);
-+ return res;
-+}
-+
-+/*
-+ * Remove a NAND device.
-+ */
-+static int __exit atmel_nand_remove(struct platform_device *pdev)
-+{
-+ struct atmel_nand_host *host = platform_get_drvdata(pdev);
-+ struct mtd_info *mtd = &host->mtd;
-+
-+ nand_release(mtd);
-+
-+ atmel_nand_disable(host);
-+
-+ if (host->ecc)
-+ iounmap(host->ecc);
-+ iounmap(host->io_base);
-+ kfree(host);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_nand_driver = {
-+ .remove = __exit_p(atmel_nand_remove),
-+ .driver = {
-+ .name = "atmel_nand",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init atmel_nand_init(void)
-+{
-+ return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
-+}
-+
-+
-+static void __exit atmel_nand_exit(void)
-+{
-+ platform_driver_unregister(&atmel_nand_driver);
-+}
-+
-+
-+module_init(atmel_nand_init);
-+module_exit(atmel_nand_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Rick Bronson");
-+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
-+MODULE_ALIAS("platform:atmel_nand");
---- /dev/null
-+++ b/drivers/mtd/nand/atmel_nand_ecc.h
-@@ -0,0 +1,36 @@
-+/*
-+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
-+ * Based on AT91SAM9260 datasheet revision B.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef ATMEL_NAND_ECC_H
-+#define ATMEL_NAND_ECC_H
-+
-+#define ATMEL_ECC_CR 0x00 /* Control register */
-+#define ATMEL_ECC_RST (1 << 0) /* Reset parity */
-+
-+#define ATMEL_ECC_MR 0x04 /* Mode register */
-+#define ATMEL_ECC_PAGESIZE (3 << 0) /* Page Size */
-+#define ATMEL_ECC_PAGESIZE_528 (0)
-+#define ATMEL_ECC_PAGESIZE_1056 (1)
-+#define ATMEL_ECC_PAGESIZE_2112 (2)
-+#define ATMEL_ECC_PAGESIZE_4224 (3)
-+
-+#define ATMEL_ECC_SR 0x08 /* Status register */
-+#define ATMEL_ECC_RECERR (1 << 0) /* Recoverable Error */
-+#define ATMEL_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
-+#define ATMEL_ECC_MULERR (1 << 2) /* Multiple Errors */
-+
-+#define ATMEL_ECC_PR 0x0c /* Parity register */
-+#define ATMEL_ECC_BITADDR (0xf << 0) /* Bit Error Address */
-+#define ATMEL_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
-+
-+#define ATMEL_ECC_NPR 0x10 /* NParity register */
-+#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */
-+
-+#endif
---- a/drivers/mtd/nand/bf5xx_nand.c
-+++ b/drivers/mtd/nand/bf5xx_nand.c
-@@ -803,3 +803,4 @@ module_exit(bf5xx_nand_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR(DRV_AUTHOR);
- MODULE_DESCRIPTION(DRV_DESC);
-+MODULE_ALIAS("platform:" DRV_NAME);
---- a/drivers/mtd/nand/ndfc.c
-+++ b/drivers/mtd/nand/ndfc.c
-@@ -317,3 +317,5 @@ module_exit(ndfc_nand_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
- MODULE_DESCRIPTION("Platform driver for NDFC");
-+MODULE_ALIAS("platform:ndfc-chip");
-+MODULE_ALIAS("platform:ndfc-nand");
---- a/drivers/mtd/nand/orion_nand.c
-+++ b/drivers/mtd/nand/orion_nand.c
-@@ -169,3 +169,4 @@ module_exit(orion_nand_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Tzachi Perelstein");
- MODULE_DESCRIPTION("NAND glue for Orion platforms");
-+MODULE_ALIAS("platform:orion_nand");
---- a/drivers/mtd/nand/plat_nand.c
-+++ b/drivers/mtd/nand/plat_nand.c
-@@ -161,3 +161,4 @@ module_exit(plat_nand_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Vitaly Wool");
- MODULE_DESCRIPTION("Simple generic NAND driver");
-+MODULE_ALIAS("platform:gen_nand");
---- a/drivers/mtd/nand/s3c2410.c
-+++ b/drivers/mtd/nand/s3c2410.c
-@@ -927,3 +927,6 @@ module_exit(s3c2410_nand_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
- MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
-+MODULE_ALIAS("platform:s3c2410-nand");
-+MODULE_ALIAS("platform:s3c2412-nand");
-+MODULE_ALIAS("platform:s3c2440-nand");
---- a/drivers/net/macb.c
-+++ b/drivers/net/macb.c
-@@ -1277,8 +1277,45 @@ static int __exit macb_remove(struct pla
- return 0;
- }
-
-+#ifdef CONFIG_PM
-+static int macb_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ struct net_device *netdev = platform_get_drvdata(pdev);
-+ struct macb *bp = netdev_priv(netdev);
-+
-+ netif_device_detach(netdev);
-+
-+#ifndef CONFIG_ARCH_AT91
-+ clk_disable(bp->hclk);
-+#endif
-+ clk_disable(bp->pclk);
-+
-+ return 0;
-+}
-+
-+static int macb_resume(struct platform_device *pdev)
-+{
-+ struct net_device *netdev = platform_get_drvdata(pdev);
-+ struct macb *bp = netdev_priv(netdev);
-+
-+ clk_enable(bp->pclk);
-+#ifndef CONFIG_ARCH_AT91
-+ clk_enable(bp->hclk);
-+#endif
-+
-+ netif_device_attach(netdev);
-+
-+ return 0;
-+}
-+#else
-+#define macb_suspend NULL
-+#define macb_resume NULL
-+#endif
-+
- static struct platform_driver macb_driver = {
- .remove = __exit_p(macb_remove),
-+ .suspend = macb_suspend,
-+ .resume = macb_resume,
- .driver = {
- .name = "macb",
- },
---- a/drivers/parport/Kconfig
-+++ b/drivers/parport/Kconfig
-@@ -36,7 +36,7 @@ if PARPORT
- config PARPORT_PC
- tristate "PC-style hardware"
- depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
-- (!M68K || ISA) && !MN10300
-+ (!M68K || ISA) && !MN10300 && !AVR32
- ---help---
- You should say Y here if you have a PC-style parallel port. All
- IBM PC compatible computers and some Alphas have PC-style
---- a/drivers/pcmcia/Kconfig
-+++ b/drivers/pcmcia/Kconfig
-@@ -277,6 +277,13 @@ config ELECTRA_CF
- Say Y here to support the CompactFlash controller on the
- PA Semi Electra eval board.
-
-+config AT32_CF
-+ tristate "AT32AP CompactFlash Controller"
-+ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
-+ help
-+ Say Y here to support the CompactFlash controller on AT32 chips.
-+ Or choose M to compile the driver as a module named "at32_cf".
-+
- config PCCARD_NONSTATIC
- tristate
-
---- a/drivers/pcmcia/Makefile
-+++ b/drivers/pcmcia/Makefile
-@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173) += vrc417
- obj-$(CONFIG_OMAP_CF) += omap_cf.o
- obj-$(CONFIG_AT91_CF) += at91_cf.o
- obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
-+obj-$(CONFIG_AT32_CF) += at32_cf.o
-
- sa11xx_core-y += soc_common.o sa11xx_base.o
- pxa2xx_core-y += soc_common.o pxa2xx_base.o
---- /dev/null
-+++ b/drivers/pcmcia/at32_cf.c
-@@ -0,0 +1,533 @@
-+/*
-+ * Driver for AVR32 Static Memory Controller: CompactFlash support
-+ *
-+ * Copyright (C) 2006 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <pcmcia/ss.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+
-+#include <asm/arch/smc.h>
-+
-+struct at32_cf_socket {
-+ struct pcmcia_socket socket;
-+ int detect_pin;
-+ int reset_pin;
-+ int vcc_pin;
-+ int ready_pin;
-+ struct resource res_attr;
-+ struct resource res_mem;
-+ struct resource res_io;
-+ struct smc_config smc;
-+ unsigned int irq;
-+ unsigned int cf_cs;
-+ socket_state_t state;
-+ unsigned present:1;
-+};
-+#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
-+
-+/*
-+ * We have the following memory layout relative to the base address:
-+ *
-+ * Alt IDE Mode: 00e0 0000 -> 00ff ffff
-+ * True IDE Mode: 00c0 0000 -> 00df ffff
-+ * I/O memory: 0080 0000 -> 00bf ffff
-+ * Common memory: 0040 0000 -> 007f ffff
-+ * Attribute memory: 0000 0000 -> 003f ffff
-+ */
-+#define CF_ATTR_OFFSET 0x00000000
-+#define CF_MEM_OFFSET 0x00400000
-+#define CF_IO_OFFSET 0x00800000
-+#define CF_RES_SIZE 4096
-+
-+#ifdef DEBUG
-+
-+static int pc_debug;
-+module_param(pc_debug, int, 0644);
-+
-+static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
-+ int level, const char *fmt, ...)
-+{
-+ va_list args;
-+
-+ if (pc_debug > level) {
-+ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
-+ va_start(args, fmt);
-+ vprintk(fmt, args);
-+ va_end(args);
-+ }
-+}
-+
-+#define debug(cf, lvl, fmt, arg...) \
-+ at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
-+
-+#else
-+#define debug(cf, lvl, fmt, arg...) do { } while (0)
-+#endif
-+
-+static inline int at32_cf_present(struct at32_cf_socket *cf)
-+{
-+ int present = 1;
-+
-+ /* If we don't have a detect pin, assume the card is present */
-+ if (cf->detect_pin >= 0)
-+ present = !gpio_get_value(cf->detect_pin);
-+
-+ return present;
-+}
-+
-+static irqreturn_t at32_cf_irq(int irq, void *dev_id)
-+{
-+ struct at32_cf_socket *cf = dev_id;
-+ unsigned int present;
-+
-+ present = at32_cf_present(cf);
-+ if (present != cf->present) {
-+ cf->present = present;
-+ debug(cf, 3, "card %s\n", present ? "present" : "gone");
-+ pcmcia_parse_events(&cf->socket, SS_DETECT);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
-+{
-+ struct at32_cf_socket *cf;
-+ u_int status = 0;
-+
-+ cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+ if (at32_cf_present(cf)) {
-+ /* NOTE: gpio on AP7xxx is 3.3V */
-+ status = SS_DETECT | SS_3VCARD;
-+ if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
-+ status |= SS_READY;
-+ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
-+ status |= SS_POWERON;
-+ }
-+
-+ *value = status;
-+ return 0;
-+}
-+
-+static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
-+{
-+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
-+ (state->csc_mask==0)?"<NONE> ":"",
-+ (state->csc_mask&SS_DETECT)?"DETECT ":"",
-+ (state->csc_mask&SS_READY)?"READY ":"",
-+ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
-+ (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
-+ (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
-+ (state->flags==0)?"<NONE> ":"",
-+ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
-+ (state->flags&SS_IOCARD)?"IOCARD ":"",
-+ (state->flags&SS_RESET)?"RESET ":"",
-+ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
-+ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
-+ state->Vcc, state->Vpp, state->io_irq);
-+
-+ /*
-+ * TODO: Allow boards to override this in case they have level
-+ * converters.
-+ */
-+ switch (state->Vcc) {
-+ case 0:
-+ if (cf->vcc_pin >= 0)
-+ gpio_set_value(cf->vcc_pin, 0);
-+ break;
-+ case 33:
-+ if (cf->vcc_pin >= 0)
-+ gpio_set_value(cf->vcc_pin, 1);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (cf->reset_pin >= 0)
-+ gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
-+
-+ cf->state = *state;
-+
-+ return 0;
-+}
-+
-+static int at32_cf_socket_init(struct pcmcia_socket *sock)
-+{
-+ debug(to_at32_cf(sock), 2, "called\n");
-+
-+ return 0;
-+}
-+
-+static int at32_cf_suspend(struct pcmcia_socket *sock)
-+{
-+ debug(to_at32_cf(sock), 2, "called\n");
-+
-+ at32_cf_set_socket(sock, &dead_socket);
-+
-+ return 0;
-+}
-+
-+static int at32_cf_set_io_map(struct pcmcia_socket *sock,
-+ struct pccard_io_map *map)
-+{
-+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
-+ int retval;
-+
-+ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
-+ map->map, map->speed, map->start, map->stop);
-+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
-+ (map->flags == 0) ? "<NONE>":"",
-+ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
-+ (map->flags & MAP_16BIT) ? "16BIT " : "",
-+ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
-+ (map->flags & MAP_0WS) ? "0WS " : "",
-+ (map->flags & MAP_WRPROT) ? "WRPROT " : "",
-+ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
-+ (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
-+
-+ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
-+
-+ if (map->flags & MAP_16BIT)
-+ cf->smc.bus_width = 2;
-+ else
-+ cf->smc.bus_width = 1;
-+
-+ if (map->flags & MAP_USE_WAIT)
-+ cf->smc.nwait_mode = 3;
-+ else
-+ cf->smc.nwait_mode = 0;
-+
-+ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
-+ if (retval) {
-+ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
-+ return retval;
-+ }
-+
-+ map->start = cf->socket.io_offset;
-+ map->stop = map->start + CF_RES_SIZE - 1;
-+
-+ return 0;
-+}
-+
-+static int
-+at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
-+{
-+ struct at32_cf_socket *cf;
-+ struct resource *res;
-+ int retval;
-+
-+ cf = container_of(sock, struct at32_cf_socket, socket);
-+
-+ debug(cf, 2, "map %u speed %u card_start %08x\n",
-+ map->map, map->speed, map->card_start);
-+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
-+ (map->flags==0)?"<NONE>":"",
-+ (map->flags&MAP_ACTIVE)?"ACTIVE ":"",
-+ (map->flags&MAP_16BIT)?"16BIT ":"",
-+ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
-+ (map->flags&MAP_0WS)?"0WS ":"",
-+ (map->flags&MAP_WRPROT)?"WRPROT ":"",
-+ (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
-+ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
-+
-+ if (map->card_start)
-+ return -EINVAL;
-+
-+ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
-+
-+ if (map->flags & MAP_ATTRIB) {
-+ res = &cf->res_attr;
-+
-+ /* Linksys WCF12 seems to use WAIT when reading CIS */
-+ map->flags |= MAP_USE_WAIT;
-+ } else {
-+ res = &cf->res_mem;
-+ }
-+
-+ if (map->flags & MAP_USE_WAIT)
-+ cf->smc.nwait_mode = 3;
-+ else
-+ cf->smc.nwait_mode = 0;
-+
-+ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
-+ if (retval) {
-+ printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
-+ return retval;
-+ }
-+
-+ map->static_start = res->start;
-+
-+ return 0;
-+}
-+
-+static struct pccard_operations at32_cf_ops = {
-+ .init = at32_cf_socket_init,
-+ .suspend = at32_cf_suspend,
-+ .get_status = at32_cf_get_status,
-+ .set_socket = at32_cf_set_socket,
-+ .set_io_map = at32_cf_set_io_map,
-+ .set_mem_map = at32_cf_set_mem_map,
-+};
-+
-+static int __init request_pin(struct platform_device *pdev,
-+ unsigned int pin, const char *name)
-+{
-+ if (gpio_request(pin, name)) {
-+ dev_warn(&pdev->dev, "failed to request %s pin\n", name);
-+ return -1;
-+ }
-+
-+ return pin;
-+}
-+
-+static struct smc_timing at32_cf_timing __initdata = {
-+ .ncs_read_setup = 30,
-+ .nrd_setup = 100,
-+ .ncs_write_setup = 30,
-+ .nwe_setup = 100,
-+
-+ .ncs_read_pulse = 360,
-+ .nrd_pulse = 290,
-+ .ncs_write_pulse = 360,
-+ .nwe_pulse = 290,
-+
-+ .read_cycle = 420,
-+ .write_cycle = 420,
-+};
-+
-+static int __init at32_cf_probe(struct platform_device *pdev)
-+{
-+ struct at32_cf_socket *cf;
-+ struct cf_platform_data *board = pdev->dev.platform_data;
-+ struct resource *res_skt;
-+ int irq;
-+ int ret;
-+
-+ dev_dbg(&pdev->dev, "probe");
-+
-+ if (!board)
-+ return -ENXIO;
-+
-+ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res_skt)
-+ return -ENXIO;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
-+ if (!cf)
-+ return -ENOMEM;
-+
-+ cf->detect_pin = -1;
-+ cf->reset_pin = -1;
-+ cf->vcc_pin = -1;
-+ cf->ready_pin = -1;
-+ cf->cf_cs = board->cs;
-+
-+ if (board->detect_pin != GPIO_PIN_NONE)
-+ cf->detect_pin = request_pin(pdev, board->detect_pin,
-+ "cf_detect");
-+ if (board->reset_pin != GPIO_PIN_NONE)
-+ cf->reset_pin = request_pin(pdev, board->reset_pin,
-+ "cf_reset");
-+ if (board->vcc_pin != GPIO_PIN_NONE)
-+ cf->vcc_pin = request_pin(pdev, board->vcc_pin,
-+ "cf_vcc");
-+ if (board->ready_pin != GPIO_PIN_NONE)
-+ /* READY is also used for irq through EIM */
-+ cf->ready_pin = board->ready_pin;
-+
-+ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
-+ cf->detect_pin, cf->reset_pin, cf->vcc_pin);
-+
-+ cf->socket.pci_irq = irq;
-+ cf->socket.ops = &at32_cf_ops;
-+ cf->socket.resource_ops = &pccard_static_ops;
-+ cf->socket.dev.parent = &pdev->dev;
-+ cf->socket.owner = THIS_MODULE;
-+ cf->socket.features =
-+ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
-+ cf->socket.map_size = CF_RES_SIZE;
-+
-+ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
-+ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
-+ cf->res_attr.name = "attribute";
-+ cf->res_attr.flags = IORESOURCE_MEM;
-+ ret = request_resource(res_skt, &cf->res_attr);
-+ if (ret)
-+ goto err_request_res_attr;
-+
-+ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
-+ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
-+ cf->res_mem.name = "memory";
-+ cf->res_mem.flags = IORESOURCE_MEM;
-+ ret = request_resource(res_skt, &cf->res_mem);
-+ if (ret)
-+ goto err_request_res_mem;
-+
-+ cf->res_io.start = res_skt->start + CF_IO_OFFSET;
-+ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
-+ cf->res_io.name = "io";
-+ cf->res_io.flags = IORESOURCE_MEM;
-+ ret = request_resource(res_skt, &cf->res_io);
-+ if (ret)
-+ goto err_request_res_io;
-+
-+ cf->socket.io_offset = cf->res_io.start;
-+
-+ if (cf->detect_pin >= 0) {
-+ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
-+ IRQF_SHARED, "cf_detect", cf);
-+ if (ret) {
-+ debug(cf, 1,
-+ "failed to request cf_detect interrupt\n");
-+ goto err_detect_irq;
-+ }
-+ }
-+
-+ cf->present = at32_cf_present(cf);
-+
-+ /* Setup SMC timings */
-+ smc_set_timing(&cf->smc, &at32_cf_timing);
-+
-+ cf->smc.bus_width = 2;
-+ cf->smc.nrd_controlled = 1;
-+ cf->smc.nwe_controlled = 1;
-+ cf->smc.nwait_mode = 0;
-+ cf->smc.byte_write = 0;
-+ cf->smc.tdf_cycles = 8;
-+ cf->smc.tdf_mode = 0;
-+
-+ ret = smc_set_configuration(cf->cf_cs, &cf->smc);
-+ if (ret) {
-+ debug(cf, 1, "failed to configure SMC\n", ret);
-+ goto err_smc;
-+ }
-+
-+ ret = pcmcia_register_socket(&cf->socket);
-+ if (ret) {
-+ debug(cf, 1, "failed to register socket: %d\n", ret);
-+ goto err_register_socket;
-+ }
-+
-+ if (cf->reset_pin >= 0)
-+ gpio_direction_output(cf->reset_pin, 0);
-+
-+ platform_set_drvdata(pdev, cf);
-+
-+ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
-+ (unsigned long)res_skt->start);
-+
-+ return 0;
-+
-+err_register_socket:
-+err_smc:
-+ if (cf->detect_pin >= 0)
-+ free_irq(gpio_to_irq(cf->detect_pin), cf);
-+err_detect_irq:
-+ release_resource(&cf->res_io);
-+err_request_res_io:
-+ release_resource(&cf->res_mem);
-+err_request_res_mem:
-+ release_resource(&cf->res_attr);
-+err_request_res_attr:
-+ if (cf->vcc_pin >= 0)
-+ gpio_free(cf->vcc_pin);
-+ if (cf->reset_pin >= 0)
-+ gpio_free(cf->reset_pin);
-+ if (cf->detect_pin >= 0)
-+ gpio_free(cf->detect_pin);
-+ kfree(cf);
-+
-+ return ret;
-+}
-+
-+static int __exit at32_cf_remove(struct platform_device *pdev)
-+{
-+ struct at32_cf_socket *cf = platform_get_drvdata(pdev);
-+
-+ pcmcia_unregister_socket(&cf->socket);
-+ if (cf->detect_pin >= 0) {
-+ free_irq(gpio_to_irq(cf->detect_pin), cf);
-+ gpio_free(cf->detect_pin);
-+ }
-+ if (cf->vcc_pin >= 0)
-+ gpio_free(cf->vcc_pin);
-+ if (cf->reset_pin >= 0)
-+ gpio_free(cf->reset_pin);
-+
-+ release_resource(&cf->res_io);
-+ release_resource(&cf->res_mem);
-+ release_resource(&cf->res_attr);
-+ kfree(cf);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver at32_cf_driver = {
-+ .remove = __exit_p(at32_cf_remove),
-+ .driver = {
-+ .name = "at32_cf",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at32_cf_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
-+ if (ret)
-+ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
-+ return ret;
-+}
-+
-+static void __exit at32_cf_exit(void)
-+{
-+ platform_driver_unregister(&at32_cf_driver);
-+}
-+
-+module_init(at32_cf_init);
-+module_exit(at32_cf_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
---- a/drivers/rtc/rtc-at32ap700x.c
-+++ b/drivers/rtc/rtc-at32ap700x.c
-@@ -262,6 +262,7 @@ static int __init at32_rtc_probe(struct
- }
-
- platform_set_drvdata(pdev, rtc);
-+ device_init_wakeup(&pdev->dev, 1);
-
- dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
- (unsigned long)rtc->regs, rtc->irq);
-@@ -281,6 +282,8 @@ static int __exit at32_rtc_remove(struct
- {
- struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
-
-+ device_init_wakeup(&pdev->dev, 0);
-+
- free_irq(rtc->irq, rtc);
- iounmap(rtc->regs);
- rtc_device_unregister(rtc->rtc);
---- a/drivers/serial/atmel_serial.c
-+++ b/drivers/serial/atmel_serial.c
-@@ -957,6 +957,20 @@ static void atmel_shutdown(struct uart_p
- }
-
- /*
-+ * Flush any TX data submitted for DMA. Called when the TX circular
-+ * buffer is reset.
-+ */
-+static void atmel_flush_buffer(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-+
-+ if (atmel_use_dma_tx(port)) {
-+ UART_PUT_TCR(port, 0);
-+ atmel_port->pdc_tx.ofs = 0;
-+ }
-+}
-+
-+/*
- * Power / Clock management.
- */
- static void atmel_serial_pm(struct uart_port *port, unsigned int state,
-@@ -1190,6 +1204,7 @@ static struct uart_ops atmel_pops = {
- .break_ctl = atmel_break_ctl,
- .startup = atmel_startup,
- .shutdown = atmel_shutdown,
-+ .flush_buffer = atmel_flush_buffer,
- .set_termios = atmel_set_termios,
- .type = atmel_type,
- .release_port = atmel_release_port,
-@@ -1440,6 +1455,15 @@ static struct uart_driver atmel_uart = {
- };
-
- #ifdef CONFIG_PM
-+static bool atmel_serial_clk_will_stop(void)
-+{
-+#ifdef CONFIG_ARCH_AT91
-+ return at91_suspend_entering_slow_clock();
-+#else
-+ return false;
-+#endif
-+}
-+
- static int atmel_serial_suspend(struct platform_device *pdev,
- pm_message_t state)
- {
-@@ -1447,7 +1471,7 @@ static int atmel_serial_suspend(struct p
- struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-
- if (device_may_wakeup(&pdev->dev)
-- && !at91_suspend_entering_slow_clock())
-+ && !atmel_serial_clk_will_stop())
- enable_irq_wake(port->irq);
- else {
- uart_suspend_port(&atmel_uart, port);
---- a/drivers/serial/serial_core.c
-+++ b/drivers/serial/serial_core.c
-@@ -552,6 +552,8 @@ static void uart_flush_buffer(struct tty
-
- spin_lock_irqsave(&port->lock, flags);
- uart_circ_clear(&state->info->xmit);
-+ if (port->ops->flush_buffer)
-+ port->ops->flush_buffer(port);
- spin_unlock_irqrestore(&port->lock, flags);
- tty_wakeup(tty);
- }
---- a/drivers/spi/atmel_spi.c
-+++ b/drivers/spi/atmel_spi.c
-@@ -51,9 +51,7 @@ struct atmel_spi {
- u8 stopping;
- struct list_head queue;
- struct spi_transfer *current_transfer;
-- unsigned long current_remaining_bytes;
-- struct spi_transfer *next_transfer;
-- unsigned long next_remaining_bytes;
-+ unsigned long remaining_bytes;
-
- void *buffer;
- dma_addr_t buffer_dma;
-@@ -133,48 +131,6 @@ static void cs_deactivate(struct atmel_s
- gpio_set_value(gpio, !active);
- }
-
--static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
-- struct spi_transfer *xfer)
--{
-- return msg->transfers.prev == &xfer->transfer_list;
--}
--
--static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
--{
-- return xfer->delay_usecs == 0 && !xfer->cs_change;
--}
--
--static void atmel_spi_next_xfer_data(struct spi_master *master,
-- struct spi_transfer *xfer,
-- dma_addr_t *tx_dma,
-- dma_addr_t *rx_dma,
-- u32 *plen)
--{
-- struct atmel_spi *as = spi_master_get_devdata(master);
-- u32 len = *plen;
--
-- /* use scratch buffer only when rx or tx data is unspecified */
-- if (xfer->rx_buf)
-- *rx_dma = xfer->rx_dma + xfer->len - len;
-- else {
-- *rx_dma = as->buffer_dma;
-- if (len > BUFFER_SIZE)
-- len = BUFFER_SIZE;
-- }
-- if (xfer->tx_buf)
-- *tx_dma = xfer->tx_dma + xfer->len - len;
-- else {
-- *tx_dma = as->buffer_dma;
-- if (len > BUFFER_SIZE)
-- len = BUFFER_SIZE;
-- memset(as->buffer, 0, len);
-- dma_sync_single_for_device(&as->pdev->dev,
-- as->buffer_dma, len, DMA_TO_DEVICE);
-- }
--
-- *plen = len;
--}
--
- /*
- * Submit next transfer for DMA.
- * lock is held, spi irq is blocked
-@@ -184,78 +140,53 @@ static void atmel_spi_next_xfer(struct s
- {
- struct atmel_spi *as = spi_master_get_devdata(master);
- struct spi_transfer *xfer;
-- u32 len, remaining, total;
-+ u32 len;
- dma_addr_t tx_dma, rx_dma;
-
-- if (!as->current_transfer)
-- xfer = list_entry(msg->transfers.next,
-- struct spi_transfer, transfer_list);
-- else if (!as->next_transfer)
-- xfer = list_entry(as->current_transfer->transfer_list.next,
-- struct spi_transfer, transfer_list);
-- else
-- xfer = NULL;
--
-- if (xfer) {
-- len = xfer->len;
-- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
-- remaining = xfer->len - len;
--
-- spi_writel(as, RPR, rx_dma);
-- spi_writel(as, TPR, tx_dma);
--
-- if (msg->spi->bits_per_word > 8)
-- len >>= 1;
-- spi_writel(as, RCR, len);
-- spi_writel(as, TCR, len);
--
-- dev_dbg(&msg->spi->dev,
-- " start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-- xfer->rx_buf, xfer->rx_dma);
-- } else {
-- xfer = as->next_transfer;
-- remaining = as->next_remaining_bytes;
-+ xfer = as->current_transfer;
-+ if (!xfer || as->remaining_bytes == 0) {
-+ if (xfer)
-+ xfer = list_entry(xfer->transfer_list.next,
-+ struct spi_transfer, transfer_list);
-+ else
-+ xfer = list_entry(msg->transfers.next,
-+ struct spi_transfer, transfer_list);
-+ as->remaining_bytes = xfer->len;
-+ as->current_transfer = xfer;
- }
-
-- as->current_transfer = xfer;
-- as->current_remaining_bytes = remaining;
--
-- if (remaining > 0)
-- len = remaining;
-- else if (!atmel_spi_xfer_is_last(msg, xfer)
-- && atmel_spi_xfer_can_be_chained(xfer)) {
-- xfer = list_entry(xfer->transfer_list.next,
-- struct spi_transfer, transfer_list);
-- len = xfer->len;
-- } else
-- xfer = NULL;
-+ len = as->remaining_bytes;
-
-- as->next_transfer = xfer;
-+ tx_dma = xfer->tx_dma + xfer->len - len;
-+ rx_dma = xfer->rx_dma + xfer->len - len;
-
-- if (xfer) {
-- total = len;
-- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
-- as->next_remaining_bytes = total - len;
--
-- spi_writel(as, RNPR, rx_dma);
-- spi_writel(as, TNPR, tx_dma);
--
-- if (msg->spi->bits_per_word > 8)
-- len >>= 1;
-- spi_writel(as, RNCR, len);
-- spi_writel(as, TNCR, len);
--
-- dev_dbg(&msg->spi->dev,
-- " next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-- xfer->rx_buf, xfer->rx_dma);
-- } else {
-- spi_writel(as, RNCR, 0);
-- spi_writel(as, TNCR, 0);
-+ /* use scratch buffer only when rx or tx data is unspecified */
-+ if (!xfer->rx_buf) {
-+ rx_dma = as->buffer_dma;
-+ if (len > BUFFER_SIZE)
-+ len = BUFFER_SIZE;
- }
-+ if (!xfer->tx_buf) {
-+ tx_dma = as->buffer_dma;
-+ if (len > BUFFER_SIZE)
-+ len = BUFFER_SIZE;
-+ memset(as->buffer, 0, len);
-+ dma_sync_single_for_device(&as->pdev->dev,
-+ as->buffer_dma, len, DMA_TO_DEVICE);
-+ }
-+
-+ spi_writel(as, RPR, rx_dma);
-+ spi_writel(as, TPR, tx_dma);
-
-- /* REVISIT: We're waiting for ENDRX before we start the next
-+ as->remaining_bytes -= len;
-+ if (msg->spi->bits_per_word > 8)
-+ len >>= 1;
-+
-+ /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
-+ * mechanism might help avoid the IRQ latency between transfers
-+ * (and improve the nCS0 errata handling on at91rm9200 chips)
-+ *
-+ * We're also waiting for ENDRX before we start the next
- * transfer because we need to handle some difficult timing
- * issues otherwise. If we wait for ENDTX in one transfer and
- * then starts waiting for ENDRX in the next, it's difficult
-@@ -265,7 +196,17 @@ static void atmel_spi_next_xfer(struct s
- *
- * It should be doable, though. Just not now...
- */
-+ spi_writel(as, TNCR, 0);
-+ spi_writel(as, RNCR, 0);
- spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
-+
-+ dev_dbg(&msg->spi->dev,
-+ " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
-+ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-+ xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
-+
-+ spi_writel(as, RCR, len);
-+ spi_writel(as, TCR, len);
- spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
- }
-
-@@ -363,7 +304,6 @@ atmel_spi_msg_done(struct spi_master *ma
- spin_lock(&as->lock);
-
- as->current_transfer = NULL;
-- as->next_transfer = NULL;
-
- /* continue if needed */
- if (list_empty(&as->queue) || as->stopping)
-@@ -447,7 +387,7 @@ atmel_spi_interrupt(int irq, void *dev_i
-
- spi_writel(as, IDR, pending);
-
-- if (as->current_remaining_bytes == 0) {
-+ if (as->remaining_bytes == 0) {
- msg->actual_length += xfer->len;
-
- if (!msg->is_dma_mapped)
-@@ -457,7 +397,7 @@ atmel_spi_interrupt(int irq, void *dev_i
- if (xfer->delay_usecs)
- udelay(xfer->delay_usecs);
-
-- if (atmel_spi_xfer_is_last(msg, xfer)) {
-+ if (msg->transfers.prev == &xfer->transfer_list) {
- /* report completed message */
- atmel_spi_msg_done(master, as, msg, 0,
- xfer->cs_change);
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -118,10 +118,10 @@ config USB_AMD5536UDC
- config USB_GADGET_ATMEL_USBA
- boolean "Atmel USBA"
- select USB_GADGET_DUALSPEED
-- depends on AVR32
-+ depends on AVR32 || ARCH_AT91CAP9
- help
- USBA is the integrated high-speed USB Device controller on
-- the AT32AP700x processors from Atmel.
-+ the AT32AP700x and AT91CAP9 processors from Atmel.
-
- config USB_ATMEL_USBA
- tristate
---- a/drivers/usb/gadget/atmel_usba_udc.c
-+++ b/drivers/usb/gadget/atmel_usba_udc.c
-@@ -18,6 +18,7 @@
- #include <linux/platform_device.h>
- #include <linux/usb/ch9.h>
- #include <linux/usb/gadget.h>
-+#include <linux/usb/atmel_usba_udc.h>
- #include <linux/delay.h>
-
- #include <asm/gpio.h>
-@@ -27,6 +28,7 @@
-
-
- static struct usba_udc the_udc;
-+static struct usba_ep *usba_ep;
-
- #ifdef CONFIG_USB_GADGET_DEBUG_FS
- #include <linux/debugfs.h>
-@@ -324,53 +326,28 @@ static int vbus_is_present(struct usba_u
- return 1;
- }
-
--static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
--{
-- unsigned long tmp;
-+#if defined(CONFIG_AVR32)
-
-- DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
-- for (; len > 0; len -= 4, buf += 4, fifo += 4) {
-- tmp = *(unsigned long *)buf;
-- if (len >= 4) {
-- DBG(DBG_FIFO, " -> %08lx\n", tmp);
-- __raw_writel(tmp, fifo);
-- } else {
-- do {
-- DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
-- __raw_writeb(tmp >> 24, fifo);
-- fifo++;
-- tmp <<= 8;
-- } while (--len);
-- break;
-- }
-- }
-+static void toggle_bias(int is_on)
-+{
- }
-
--static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
-+#elif defined(CONFIG_ARCH_AT91)
-+
-+#include <asm/arch/at91_pmc.h>
-+
-+static void toggle_bias(int is_on)
- {
-- union {
-- unsigned long *w;
-- unsigned char *b;
-- } p;
-- unsigned long tmp;
--
-- DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
-- for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
-- if (len >= 4) {
-- tmp = __raw_readl(fifo);
-- *p.w = tmp;
-- DBG(DBG_FIFO, " -> %08lx\n", tmp);
-- } else {
-- do {
-- tmp = __raw_readb(fifo);
-- *p.b = tmp;
-- DBG(DBG_FIFO, " -> %02lx\n", tmp);
-- fifo++, p.b++;
-- } while (--len);
-- }
-- }
-+ unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
-+
-+ if (is_on)
-+ at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
-+ else
-+ at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
- }
-
-+#endif /* CONFIG_ARCH_AT91 */
-+
- static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
- {
- unsigned int transaction_len;
-@@ -387,7 +364,7 @@ static void next_fifo_transaction(struct
- ep->ep.name, req, transaction_len,
- req->last_transaction ? ", done" : "");
-
-- copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
-+ memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len);
- usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
- req->req.actual += transaction_len;
- }
-@@ -476,7 +453,7 @@ static void receive_data(struct usba_ep
- bytecount = req->req.length - req->req.actual;
- }
-
-- copy_from_fifo(req->req.buf + req->req.actual,
-+ memcpy_fromio(req->req.buf + req->req.actual,
- ep->fifo, bytecount);
- req->req.actual += bytecount;
-
-@@ -1029,33 +1006,6 @@ static const struct usb_gadget_ops usba_
- .set_selfpowered = usba_udc_set_selfpowered,
- };
-
--#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
--{ \
-- .ep = { \
-- .ops = &usba_ep_ops, \
-- .name = nam, \
-- .maxpacket = maxpkt, \
-- }, \
-- .udc = &the_udc, \
-- .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
-- .fifo_size = maxpkt, \
-- .nr_banks = maxbk, \
-- .index = idx, \
-- .can_dma = dma, \
-- .can_isoc = isoc, \
--}
--
--static struct usba_ep usba_ep[] = {
-- EP("ep0", 0, 64, 1, 0, 0),
-- EP("ep1in-bulk", 1, 512, 2, 1, 1),
-- EP("ep2out-bulk", 2, 512, 2, 1, 1),
-- EP("ep3in-int", 3, 64, 3, 1, 0),
-- EP("ep4out-int", 4, 64, 3, 1, 0),
-- EP("ep5in-iso", 5, 1024, 3, 1, 1),
-- EP("ep6out-iso", 6, 1024, 3, 1, 1),
--};
--#undef EP
--
- static struct usb_endpoint_descriptor usba_ep0_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-@@ -1074,7 +1024,6 @@ static void nop_release(struct device *d
- static struct usba_udc the_udc = {
- .gadget = {
- .ops = &usba_udc_ops,
-- .ep0 = &usba_ep[0].ep,
- .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
- .is_dualspeed = 1,
- .name = "atmel_usba_udc",
-@@ -1231,7 +1180,7 @@ static int do_test_mode(struct usba_udc
- } else {
- usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
- usba_writel(udc, TST, USBA_TST_PKT_MODE);
-- copy_to_fifo(ep->fifo, test_packet_buffer,
-+ memcpy_toio(ep->fifo, test_packet_buffer,
- sizeof(test_packet_buffer));
- usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
- dev_info(dev, "Entering Test_Packet mode...\n");
-@@ -1530,13 +1479,13 @@ restart:
- DBG(DBG_HW, "Packet length: %u\n", pkt_len);
- if (pkt_len != sizeof(crq)) {
- pr_warning("udc: Invalid packet length %u "
-- "(expected %lu)\n", pkt_len, sizeof(crq));
-+ "(expected %zu)\n", pkt_len, sizeof(crq));
- set_protocol_stall(udc, ep);
- return;
- }
-
- DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
-- copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
-+ memcpy_fromio(crq.data, ep->fifo, sizeof(crq));
-
- /* Free up one bank in the FIFO so that we can
- * generate or receive a reply right away. */
-@@ -1688,6 +1637,7 @@ static irqreturn_t usba_udc_irq(int irq,
- DBG(DBG_INT, "irq, status=%#08x\n", status);
-
- if (status & USBA_DET_SUSPEND) {
-+ toggle_bias(0);
- usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
- DBG(DBG_BUS, "Suspend detected\n");
- if (udc->gadget.speed != USB_SPEED_UNKNOWN
-@@ -1699,6 +1649,7 @@ static irqreturn_t usba_udc_irq(int irq,
- }
-
- if (status & USBA_WAKE_UP) {
-+ toggle_bias(1);
- usba_writel(udc, INT_CLR, USBA_WAKE_UP);
- DBG(DBG_BUS, "Wake Up CPU detected\n");
- }
-@@ -1792,12 +1743,14 @@ static irqreturn_t usba_vbus_irq(int irq
- vbus = gpio_get_value(udc->vbus_pin);
- if (vbus != udc->vbus_prev) {
- if (vbus) {
-- usba_writel(udc, CTRL, USBA_EN_USBA);
-+ toggle_bias(1);
-+ usba_writel(udc, CTRL, USBA_ENABLE_MASK);
- usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
- } else {
- udc->gadget.speed = USB_SPEED_UNKNOWN;
- reset_all_endpoints(udc);
-- usba_writel(udc, CTRL, 0);
-+ toggle_bias(0);
-+ usba_writel(udc, CTRL, USBA_DISABLE_MASK);
- spin_unlock(&udc->lock);
- udc->driver->disconnect(&udc->gadget);
- spin_lock(&udc->lock);
-@@ -1850,7 +1803,8 @@ int usb_gadget_register_driver(struct us
- /* If Vbus is present, enable the controller and wait for reset */
- spin_lock_irqsave(&udc->lock, flags);
- if (vbus_is_present(udc) && udc->vbus_prev == 0) {
-- usba_writel(udc, CTRL, USBA_EN_USBA);
-+ toggle_bias(1);
-+ usba_writel(udc, CTRL, USBA_ENABLE_MASK);
- usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
- }
- spin_unlock_irqrestore(&udc->lock, flags);
-@@ -1883,7 +1837,8 @@ int usb_gadget_unregister_driver(struct
- spin_unlock_irqrestore(&udc->lock, flags);
-
- /* This will also disable the DP pullup */
-- usba_writel(udc, CTRL, 0);
-+ toggle_bias(0);
-+ usba_writel(udc, CTRL, USBA_DISABLE_MASK);
-
- driver->unbind(&udc->gadget);
- udc->gadget.dev.driver = NULL;
-@@ -1908,7 +1863,7 @@ static int __init usba_udc_probe(struct
-
- regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
- fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
-- if (!regs || !fifo)
-+ if (!regs || !fifo || !pdata)
- return -ENXIO;
-
- irq = platform_get_irq(pdev, 0);
-@@ -1953,19 +1908,48 @@ static int __init usba_udc_probe(struct
-
- /* Make sure we start from a clean slate */
- clk_enable(pclk);
-- usba_writel(udc, CTRL, 0);
-+ toggle_bias(0);
-+ usba_writel(udc, CTRL, USBA_DISABLE_MASK);
- clk_disable(pclk);
-
-+ usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
-+ GFP_KERNEL);
-+ if (!usba_ep)
-+ goto err_alloc_ep;
-+
-+ the_udc.gadget.ep0 = &usba_ep[0].ep;
-+
- INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
- usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
- usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
- usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
-- for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
-+ usba_ep[0].ep.ops = &usba_ep_ops;
-+ usba_ep[0].ep.name = pdata->ep[0].name;
-+ usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
-+ usba_ep[0].udc = &the_udc;
-+ INIT_LIST_HEAD(&usba_ep[0].queue);
-+ usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
-+ usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
-+ usba_ep[0].index = pdata->ep[0].index;
-+ usba_ep[0].can_dma = pdata->ep[0].can_dma;
-+ usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
-+
-+ for (i = 1; i < pdata->num_ep; i++) {
- struct usba_ep *ep = &usba_ep[i];
-
- ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
- ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
- ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
-+ ep->ep.ops = &usba_ep_ops;
-+ ep->ep.name = pdata->ep[i].name;
-+ ep->ep.maxpacket = pdata->ep[i].fifo_size;
-+ ep->udc = &the_udc;
-+ INIT_LIST_HEAD(&ep->queue);
-+ ep->fifo_size = pdata->ep[i].fifo_size;
-+ ep->nr_banks = pdata->ep[i].nr_banks;
-+ ep->index = pdata->ep[i].index;
-+ ep->can_dma = pdata->ep[i].can_dma;
-+ ep->can_isoc = pdata->ep[i].can_isoc;
-
- list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
- }
-@@ -1984,7 +1968,7 @@ static int __init usba_udc_probe(struct
- goto err_device_add;
- }
-
-- if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
-+ if (pdata->vbus_pin >= 0) {
- if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
- udc->vbus_pin = pdata->vbus_pin;
-
-@@ -2004,7 +1988,7 @@ static int __init usba_udc_probe(struct
- }
-
- usba_init_debugfs(udc);
-- for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+ for (i = 1; i < pdata->num_ep; i++)
- usba_ep_init_debugfs(udc, &usba_ep[i]);
-
- return 0;
-@@ -2012,6 +1996,8 @@ static int __init usba_udc_probe(struct
- err_device_add:
- free_irq(irq, udc);
- err_request_irq:
-+ kfree(usba_ep);
-+err_alloc_ep:
- iounmap(udc->fifo);
- err_map_fifo:
- iounmap(udc->regs);
-@@ -2029,10 +2015,11 @@ static int __exit usba_udc_remove(struct
- {
- struct usba_udc *udc;
- int i;
-+ struct usba_platform_data *pdata = pdev->dev.platform_data;
-
- udc = platform_get_drvdata(pdev);
-
-- for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+ for (i = 1; i < pdata->num_ep; i++)
- usba_ep_cleanup_debugfs(&usba_ep[i]);
- usba_cleanup_debugfs(udc);
-
-@@ -2040,6 +2027,7 @@ static int __exit usba_udc_remove(struct
- gpio_free(udc->vbus_pin);
-
- free_irq(udc->irq, udc);
-+ kfree(usba_ep);
- iounmap(udc->fifo);
- iounmap(udc->regs);
- clk_put(udc->hclk);
---- a/drivers/usb/gadget/atmel_usba_udc.h
-+++ b/drivers/usb/gadget/atmel_usba_udc.h
-@@ -41,6 +41,15 @@
- #define USBA_EN_USBA (1 << 8)
- #define USBA_DETACH (1 << 9)
- #define USBA_REMOTE_WAKE_UP (1 << 10)
-+#define USBA_PULLD_DIS (1 << 11)
-+
-+#if defined(CONFIG_AVR32)
-+#define USBA_ENABLE_MASK USBA_EN_USBA
-+#define USBA_DISABLE_MASK 0
-+#elif defined(CONFIG_ARCH_AT91)
-+#define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS)
-+#define USBA_DISABLE_MASK USBA_DETACH
-+#endif /* CONFIG_ARCH_AT91 */
-
- /* Bitfields in FNUM */
- #define USBA_MICRO_FRAME_NUM_OFFSET 0
---- a/drivers/video/atmel_lcdfb.c
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -38,7 +38,9 @@
- #endif
-
- #if defined(CONFIG_ARCH_AT91)
--#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
-+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_YPAN)
-
- static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
- struct fb_var_screeninfo *var)
-@@ -176,7 +178,7 @@ static struct fb_fix_screeninfo atmel_lc
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
- .xpanstep = 0,
-- .ypanstep = 0,
-+ .ypanstep = 1,
- .ywrapstep = 0,
- .accel = FB_ACCEL_NONE,
- };
-@@ -250,6 +252,8 @@ static int atmel_lcdfb_alloc_video_memor
- return -ENOMEM;
- }
-
-+ memset(info->screen_base, 0, info->fix.smem_len);
-+
- return 0;
- }
-
-@@ -634,7 +638,6 @@ static int __init atmel_lcdfb_init_fbinf
- struct fb_info *info = sinfo->info;
- int ret = 0;
-
-- memset_io(info->screen_base, 0, info->fix.smem_len);
- info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
-
- dev_info(info->device,
-@@ -764,6 +767,11 @@ static int __init atmel_lcdfb_probe(stru
- info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
- if (!info->screen_base)
- goto release_intmem;
-+
-+ /*
-+ * Don't clear the framebuffer -- someone may have set
-+ * up a splash image.
-+ */
- } else {
- /* alocate memory buffer */
- ret = atmel_lcdfb_alloc_video_memory(sinfo);
---- a/fs/fs-writeback.c
-+++ b/fs/fs-writeback.c
-@@ -385,8 +385,6 @@ __writeback_single_inode(struct inode *i
- * WB_SYNC_HOLD is a hack for sys_sync(): reattach the inode to sb->s_dirty so
- * that it can be located for waiting on in __writeback_single_inode().
- *
-- * Called under inode_lock.
-- *
- * If `bdi' is non-zero then we're being asked to writeback a specific queue.
- * This function assumes that the blockdev superblock's inodes are backed by
- * a variety of queues, so all inodes are searched. For other superblocks,
-@@ -402,11 +400,12 @@ __writeback_single_inode(struct inode *i
- * on the writer throttling path, and we get decent balancing between many
- * throttled threads: we don't want them all piling up on inode_sync_wait.
- */
--static void
--sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc)
-+void generic_sync_sb_inodes(struct super_block *sb,
-+ struct writeback_control *wbc)
- {
- const unsigned long start = jiffies; /* livelock avoidance */
-
-+ spin_lock(&inode_lock);
- if (!wbc->for_kupdate || list_empty(&sb->s_io))
- queue_io(sb, wbc->older_than_this);
-
-@@ -485,8 +484,16 @@ sync_sb_inodes(struct super_block *sb, s
- if (!list_empty(&sb->s_more_io))
- wbc->more_io = 1;
- }
-+ spin_unlock(&inode_lock);
- return; /* Leave any unwritten inodes on s_io */
- }
-+EXPORT_SYMBOL_GPL(generic_sync_sb_inodes);
-+
-+static void sync_sb_inodes(struct super_block *sb,
-+ struct writeback_control *wbc)
-+{
-+ generic_sync_sb_inodes(sb, wbc);
-+}
-
- /*
- * Start writeback of dirty pagecache data against all unlocked inodes.
-@@ -526,11 +533,8 @@ restart:
- * be unmounted by the time it is released.
- */
- if (down_read_trylock(&sb->s_umount)) {
-- if (sb->s_root) {
-- spin_lock(&inode_lock);
-+ if (sb->s_root)
- sync_sb_inodes(sb, wbc);
-- spin_unlock(&inode_lock);
-- }
- up_read(&sb->s_umount);
- }
- spin_lock(&sb_lock);
-@@ -568,9 +572,7 @@ void sync_inodes_sb(struct super_block *
- (inodes_stat.nr_inodes - inodes_stat.nr_unused) +
- nr_dirty + nr_unstable;
- wbc.nr_to_write += wbc.nr_to_write / 2; /* Bit more for luck */
-- spin_lock(&inode_lock);
- sync_sb_inodes(sb, &wbc);
-- spin_unlock(&inode_lock);
- }
-
- /*
---- a/include/asm-avr32/arch-at32ap/board.h
-+++ b/include/asm-avr32/arch-at32ap/board.h
-@@ -8,6 +8,12 @@
-
- #define GPIO_PIN_NONE (-1)
-
-+/*
-+ * Clock rates for various on-board oscillators. The number of entries
-+ * in this array is chip-dependent.
-+ */
-+extern unsigned long at32_board_osc_rates[];
-+
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
-
-@@ -36,11 +42,10 @@ at32_add_device_spi(unsigned int id, str
- struct atmel_lcdfb_info;
- struct platform_device *
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-- unsigned long fbmem_start, unsigned long fbmem_len);
-+ unsigned long fbmem_start, unsigned long fbmem_len,
-+ unsigned int pin_config);
-
--struct usba_platform_data {
-- int vbus_pin;
--};
-+struct usba_platform_data;
- struct platform_device *
- at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
-
-@@ -68,9 +73,27 @@ struct platform_device *at32_add_device_
- struct platform_device *
- at32_add_device_ssc(unsigned int id, unsigned int flags);
-
--struct platform_device *at32_add_device_twi(unsigned int id);
--struct platform_device *at32_add_device_mci(unsigned int id);
--struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct i2c_board_info;
-+struct platform_device *at32_add_device_twi(unsigned int id,
-+ struct i2c_board_info *b,
-+ unsigned int n);
-+
-+struct mci_platform_data {
-+ int detect_pin;
-+ int wp_pin;
-+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-+
-+struct ac97c_platform_data {
-+ unsigned short dma_rx_periph_id;
-+ unsigned short dma_tx_periph_id;
-+ unsigned short dma_controller_id;
-+ int reset_pin;
-+};
-+struct platform_device *
-+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
-+
- struct platform_device *at32_add_device_abdac(unsigned int id);
-
- struct cf_platform_data {
-@@ -84,4 +107,20 @@ struct platform_device *
- at32_add_device_cf(unsigned int id, unsigned int extint,
- struct cf_platform_data *data);
-
-+struct platform_device *
-+at32_add_device_psif(unsigned int id);
-+
-+/* NAND / SmartMedia */
-+struct atmel_nand_data {
-+ int enable_pin; /* chip enable */
-+ int det_pin; /* card detect */
-+ int rdy_pin; /* ready/busy */
-+ u8 ale; /* address line number connected to ALE */
-+ u8 cle; /* address line number connected to CLE */
-+ u8 bus_width_16; /* buswidth is 16 bit */
-+ struct mtd_partition *(*partition_info)(int size, int *num_partitions);
-+};
-+struct platform_device *
-+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
-+
- #endif /* __ASM_ARCH_BOARD_H */
---- a/include/asm-avr32/arch-at32ap/init.h
-+++ b/include/asm-avr32/arch-at32ap/init.h
-@@ -13,10 +13,6 @@
- void setup_platform(void);
- void setup_board(void);
-
--/* Called by setup_platform */
--void at32_clock_init(void);
--void at32_portmux_init(void);
--
- void at32_setup_serial_console(unsigned int usart_id);
-
- #endif /* __ASM_AVR32_AT32AP_INIT_H__ */
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap/pm.h
-@@ -0,0 +1,51 @@
-+/*
-+ * AVR32 AP Power Management.
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_ARCH_PM_H
-+#define __ASM_AVR32_ARCH_PM_H
-+
-+/* Possible arguments to the "sleep" instruction */
-+#define CPU_SLEEP_IDLE 0
-+#define CPU_SLEEP_FROZEN 1
-+#define CPU_SLEEP_STANDBY 2
-+#define CPU_SLEEP_STOP 3
-+#define CPU_SLEEP_STATIC 5
-+
-+#ifndef __ASSEMBLY__
-+extern void cpu_enter_idle(void);
-+extern void cpu_enter_standby(unsigned long sdramc_base);
-+
-+extern bool disable_idle_sleep;
-+
-+static inline void cpu_disable_idle_sleep(void)
-+{
-+ disable_idle_sleep = true;
-+}
-+
-+static inline void cpu_enable_idle_sleep(void)
-+{
-+ disable_idle_sleep = false;
-+}
-+
-+static inline void cpu_idle_sleep(void)
-+{
-+ /*
-+ * If we're using the COUNT and COMPARE registers for
-+ * timekeeping, we can't use the IDLE state.
-+ */
-+ if (disable_idle_sleep)
-+ cpu_relax();
-+ else
-+ cpu_enter_idle();
-+}
-+
-+void intc_set_suspend_handler(unsigned long offset);
-+#endif
-+
-+#endif /* __ASM_AVR32_ARCH_PM_H */
---- a/include/asm-avr32/arch-at32ap/portmux.h
-+++ b/include/asm-avr32/arch-at32ap/portmux.h
-@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin
- void at32_select_gpio(unsigned int pin, unsigned long flags);
- void at32_reserve_pin(unsigned int pin);
-
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port);
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
-+void at32_deselect_pins(unsigned int port, u32 pins);
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
- #endif /* __ASM_ARCH_PORTMUX_H__ */
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap/sram.h
-@@ -0,0 +1,30 @@
-+/*
-+ * Simple SRAM allocator
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_ARCH_SRAM_H
-+#define __ASM_AVR32_ARCH_SRAM_H
-+
-+#include <linux/genalloc.h>
-+
-+extern struct gen_pool *sram_pool;
-+
-+static inline unsigned long sram_alloc(size_t len)
-+{
-+ if (!sram_pool)
-+ return 0UL;
-+
-+ return gen_pool_alloc(sram_pool, len);
-+}
-+
-+static inline void sram_free(unsigned long addr, size_t len)
-+{
-+ return gen_pool_free(sram_pool, addr, len);
-+}
-+
-+#endif /* __ASM_AVR32_ARCH_SRAM_H */
---- a/include/asm-avr32/arch-at32ap/time.h
-+++ /dev/null
-@@ -1,112 +0,0 @@
--/*
-- * Copyright (C) 2007 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
--#define _ASM_AVR32_ARCH_AT32AP_TIME_H
--
--#include <linux/platform_device.h>
--
--extern struct irqaction timer_irqaction;
--extern struct platform_device at32_systc0_device;
--extern void local_timer_interrupt(int irq, void *dev_id);
--
--#define TIMER_BCR 0x000000c0
--#define TIMER_BCR_SYNC 0
--#define TIMER_BMR 0x000000c4
--#define TIMER_BMR_TC0XC0S 0
--#define TIMER_BMR_TC1XC1S 2
--#define TIMER_BMR_TC2XC2S 4
--#define TIMER_CCR 0x00000000
--#define TIMER_CCR_CLKDIS 1
--#define TIMER_CCR_CLKEN 0
--#define TIMER_CCR_SWTRG 2
--#define TIMER_CMR 0x00000004
--#define TIMER_CMR_ABETRG 10
--#define TIMER_CMR_ACPA 16
--#define TIMER_CMR_ACPC 18
--#define TIMER_CMR_AEEVT 20
--#define TIMER_CMR_ASWTRG 22
--#define TIMER_CMR_BCPB 24
--#define TIMER_CMR_BCPC 26
--#define TIMER_CMR_BEEVT 28
--#define TIMER_CMR_BSWTRG 30
--#define TIMER_CMR_BURST 4
--#define TIMER_CMR_CLKI 3
--#define TIMER_CMR_CPCDIS 7
--#define TIMER_CMR_CPCSTOP 6
--#define TIMER_CMR_CPCTRG 14
--#define TIMER_CMR_EEVT 10
--#define TIMER_CMR_EEVTEDG 8
--#define TIMER_CMR_ENETRG 12
--#define TIMER_CMR_ETRGEDG 8
--#define TIMER_CMR_LDBDIS 7
--#define TIMER_CMR_LDBSTOP 6
--#define TIMER_CMR_LDRA 16
--#define TIMER_CMR_LDRB 18
--#define TIMER_CMR_TCCLKS 0
--#define TIMER_CMR_WAVE 15
--#define TIMER_CMR_WAVSEL 13
--#define TIMER_CV 0x00000010
--#define TIMER_CV_CV 0
--#define TIMER_IDR 0x00000028
--#define TIMER_IDR_COVFS 0
--#define TIMER_IDR_CPAS 2
--#define TIMER_IDR_CPBS 3
--#define TIMER_IDR_CPCS 4
--#define TIMER_IDR_ETRGS 7
--#define TIMER_IDR_LDRAS 5
--#define TIMER_IDR_LDRBS 6
--#define TIMER_IDR_LOVRS 1
--#define TIMER_IER 0x00000024
--#define TIMER_IER_COVFS 0
--#define TIMER_IER_CPAS 2
--#define TIMER_IER_CPBS 3
--#define TIMER_IER_CPCS 4
--#define TIMER_IER_ETRGS 7
--#define TIMER_IER_LDRAS 5
--#define TIMER_IER_LDRBS 6
--#define TIMER_IER_LOVRS 1
--#define TIMER_IMR 0x0000002c
--#define TIMER_IMR_COVFS 0
--#define TIMER_IMR_CPAS 2
--#define TIMER_IMR_CPBS 3
--#define TIMER_IMR_CPCS 4
--#define TIMER_IMR_ETRGS 7
--#define TIMER_IMR_LDRAS 5
--#define TIMER_IMR_LDRBS 6
--#define TIMER_IMR_LOVRS 1
--#define TIMER_RA 0x00000014
--#define TIMER_RA_RA 0
--#define TIMER_RB 0x00000018
--#define TIMER_RB_RB 0
--#define TIMER_RC 0x0000001c
--#define TIMER_RC_RC 0
--#define TIMER_SR 0x00000020
--#define TIMER_SR_CLKSTA 16
--#define TIMER_SR_COVFS 0
--#define TIMER_SR_CPAS 2
--#define TIMER_SR_CPBS 3
--#define TIMER_SR_CPCS 4
--#define TIMER_SR_ETRGS 7
--#define TIMER_SR_LDRAS 5
--#define TIMER_SR_LDRBS 6
--#define TIMER_SR_LOVRS 1
--#define TIMER_SR_MTIOA 17
--#define TIMER_SR_MTIOB 18
--
--/* Bit manipulation macros */
--#define TIMER_BIT(name) (1 << TIMER_##name)
--#define TIMER_BF(name,value) ((value) << TIMER_##name)
--
--/* Register access macros */
--#define timer_read(port,instance,reg) \
-- __raw_readl(port + (0x40 * instance) + TIMER_##reg)
--#define timer_write(port,instance,reg,value) \
-- __raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
--
--#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */
---- a/include/asm-avr32/asm.h
-+++ b/include/asm-avr32/asm.h
-@@ -12,10 +12,10 @@
- #include <asm/asm-offsets.h>
- #include <asm/thread_info.h>
-
--#define mask_interrupts ssrf SR_GM_BIT
--#define mask_exceptions ssrf SR_EM_BIT
--#define unmask_interrupts csrf SR_GM_BIT
--#define unmask_exceptions csrf SR_EM_BIT
-+#define mask_interrupts ssrf SYSREG_GM_OFFSET
-+#define mask_exceptions ssrf SYSREG_EM_OFFSET
-+#define unmask_interrupts csrf SYSREG_GM_OFFSET
-+#define unmask_exceptions csrf SYSREG_EM_OFFSET
-
- #ifdef CONFIG_FRAME_POINTER
- .macro save_fp
---- /dev/null
-+++ b/include/asm-avr32/dma-controller.h
-@@ -0,0 +1,166 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
-+
-+#include <linux/device.h>
-+
-+#define DMA_DIR_MEM_TO_MEM 0x0000
-+#define DMA_DIR_MEM_TO_PERIPH 0x0001
-+#define DMA_DIR_PERIPH_TO_MEM 0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
-+
-+#define DMA_WIDTH_8BIT 0
-+#define DMA_WIDTH_16BIT 1
-+#define DMA_WIDTH_32BIT 2
-+
-+struct dma_request {
-+ struct dma_controller *dmac;
-+ struct list_head list;
-+
-+ unsigned short channel;
-+
-+ void (*xfer_complete)(struct dma_request *req);
-+ void (*block_complete)(struct dma_request *req);
-+ void (*error)(struct dma_request *req);
-+};
-+
-+struct dma_request_sg {
-+ struct dma_request req;
-+
-+ int nr_sg;
-+ struct scatterlist *sg;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+
-+ dma_addr_t data_reg;
-+ unsigned short periph_id;
-+
-+ unsigned char direction;
-+ unsigned char width;
-+};
-+#define to_dma_request_sg(_req) \
-+ container_of(_req, struct dma_request_sg, req)
-+
-+struct dma_request_cyclic {
-+ struct dma_request req;
-+
-+ int periods;
-+ unsigned long buffer_size;
-+
-+ dma_addr_t buffer_start;
-+ dma_addr_t data_reg;
-+
-+ unsigned short periph_id;
-+ unsigned char direction;
-+ unsigned char width;
-+
-+ void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req) \
-+ container_of(_req, struct dma_request_cyclic, req)
-+
-+struct dma_request_memcpy {
-+ struct dma_request req;
-+
-+ dma_addr_t src_addr;
-+ unsigned int src_width;
-+ unsigned int src_stride;
-+
-+ dma_addr_t dst_addr;
-+ unsigned int dst_width;
-+ unsigned int dst_stride;
-+
-+ size_t length;
-+
-+ unsigned short src_reverse:1;
-+ unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req) \
-+ container_of(_req, struct dma_request_memcpy, req)
-+
-+struct dma_controller {
-+ struct list_head list;
-+ int id;
-+ struct device *dev;
-+
-+ int (*alloc_channel)(struct dma_controller *dmac);
-+ void (*release_channel)(struct dma_controller *dmac,
-+ int channel);
-+ int (*prepare_request_sg)(struct dma_controller *dmac,
-+ struct dma_request_sg *req);
-+ int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req);
-+ int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req);
-+ int (*start_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ int (*stop_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+ unsigned int channel);
-+};
-+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+ return dmac->alloc_channel(dmac);
-+}
-+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
-+{
-+ dmac->release_channel(dmac, chan);
-+}
-+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+ struct dma_request_sg *req)
-+{
-+ return dmac->prepare_request_sg(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ return dmac->prepare_request_cyclic(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req)
-+{
-+ return dmac->prepare_request_memcpy(dmac, req);
-+}
-+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->start_request(dmac, channel);
-+}
-+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->stop_request(dmac, channel);
-+}
-+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->get_current_pos(dmac, channel);
-+}
-+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
-+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
---- a/include/asm-avr32/intc.h
-+++ /dev/null
-@@ -1,128 +0,0 @@
--#ifndef __ASM_AVR32_INTC_H
--#define __ASM_AVR32_INTC_H
--
--#include <linux/sysdev.h>
--#include <linux/interrupt.h>
--
--struct irq_controller;
--struct irqaction;
--struct pt_regs;
--
--struct platform_device;
--
--/* Information about the internal interrupt controller */
--struct intc_device {
-- /* ioremapped address of configuration block */
-- void __iomem *regs;
--
-- /* the physical device */
-- struct platform_device *pdev;
--
-- /* Number of interrupt lines per group. */
-- unsigned int irqs_per_group;
--
-- /* The highest group ID + 1 */
-- unsigned int nr_groups;
--
-- /*
-- * Bitfield indicating which groups are actually in use. The
-- * size of the array is
-- * ceil(group_max / (8 * sizeof(unsigned int))).
-- */
-- unsigned int group_mask[];
--};
--
--struct irq_controller_class {
-- /*
-- * A short name identifying this kind of controller.
-- */
-- const char *typename;
-- /*
-- * Handle the IRQ. Must do any necessary acking and masking.
-- */
-- irqreturn_t (*handle)(int irq, void *dev_id, struct pt_regs *regs);
-- /*
-- * Register a new IRQ handler.
-- */
-- int (*setup)(struct irq_controller *ctrl, unsigned int irq,
-- struct irqaction *action);
-- /*
-- * Unregister a IRQ handler.
-- */
-- void (*free)(struct irq_controller *ctrl, unsigned int irq,
-- void *dev_id);
-- /*
-- * Mask the IRQ in the interrupt controller.
-- */
-- void (*mask)(struct irq_controller *ctrl, unsigned int irq);
-- /*
-- * Unmask the IRQ in the interrupt controller.
-- */
-- void (*unmask)(struct irq_controller *ctrl, unsigned int irq);
-- /*
-- * Set the type of the IRQ. See below for possible types.
-- * Return -EINVAL if a given type is not supported
-- */
-- int (*set_type)(struct irq_controller *ctrl, unsigned int irq,
-- unsigned int type);
-- /*
-- * Return the IRQ type currently set
-- */
-- unsigned int (*get_type)(struct irq_controller *ctrl, unsigned int irq);
--};
--
--struct irq_controller {
-- struct irq_controller_class *class;
-- unsigned int irq_group;
-- unsigned int first_irq;
-- unsigned int nr_irqs;
-- struct list_head list;
--};
--
--struct intc_group_desc {
-- struct irq_controller *ctrl;
-- irqreturn_t (*handle)(int, void *, struct pt_regs *);
-- unsigned long flags;
-- void *dev_id;
-- const char *devname;
--};
--
--/*
-- * The internal interrupt controller. Defined in board/part-specific
-- * devices.c.
-- * TODO: Should probably be defined per-cpu.
-- */
--extern struct intc_device intc;
--
--extern int request_internal_irq(unsigned int irq,
-- irqreturn_t (*handler)(int, void *, struct pt_regs *),
-- unsigned long irqflags,
-- const char *devname, void *dev_id);
--extern void free_internal_irq(unsigned int irq);
--
--/* Only used by time_init() */
--extern int setup_internal_irq(unsigned int irq, struct intc_group_desc *desc);
--
--/*
-- * Set interrupt priority for a given group. `group' can be found by
-- * using irq_to_group(irq). Priority can be from 0 (lowest) to 3
-- * (highest). Higher-priority interrupts will preempt lower-priority
-- * interrupts (unless interrupts are masked globally).
-- *
-- * This function does not check for conflicts within a group.
-- */
--extern int intc_set_priority(unsigned int group,
-- unsigned int priority);
--
--/*
-- * Returns a bitmask of pending interrupts in a group.
-- */
--extern unsigned long intc_get_pending(unsigned int group);
--
--/*
-- * Register a new external interrupt controller. Returns the first
-- * external IRQ number that is assigned to the new controller.
-- */
--extern int intc_register_controller(struct irq_controller *ctrl);
--
--#endif /* __ASM_AVR32_INTC_H */
---- a/include/asm-avr32/irq.h
-+++ b/include/asm-avr32/irq.h
-@@ -14,6 +14,11 @@
- #ifndef __ASSEMBLER__
- int nmi_enable(void);
- void nmi_disable(void);
-+
-+/*
-+ * Returns a bitmask of pending interrupts in a group.
-+ */
-+extern unsigned long intc_get_pending(unsigned int group);
- #endif
-
- #endif /* __ASM_AVR32_IOCTLS_H */
---- a/include/asm-avr32/mmu_context.h
-+++ b/include/asm-avr32/mmu_context.h
-@@ -13,7 +13,6 @@
- #define __ASM_AVR32_MMU_CONTEXT_H
-
- #include <asm/tlbflush.h>
--#include <asm/pgalloc.h>
- #include <asm/sysreg.h>
- #include <asm-generic/mm_hooks.h>
-
---- a/include/asm-avr32/page.h
-+++ b/include/asm-avr32/page.h
-@@ -8,13 +8,11 @@
- #ifndef __ASM_AVR32_PAGE_H
- #define __ASM_AVR32_PAGE_H
-
-+#include <linux/const.h>
-+
- /* PAGE_SHIFT determines the page size */
- #define PAGE_SHIFT 12
--#ifdef __ASSEMBLY__
--#define PAGE_SIZE (1 << PAGE_SHIFT)
--#else
--#define PAGE_SIZE (1UL << PAGE_SHIFT)
--#endif
-+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
- #define PAGE_MASK (~(PAGE_SIZE-1))
- #define PTE_MASK PAGE_MASK
-
---- a/include/asm-avr32/pci.h
-+++ b/include/asm-avr32/pci.h
-@@ -5,4 +5,6 @@
-
- #define PCI_DMA_BUS_IS_PHYS (1)
-
-+#include <asm-generic/pci-dma-compat.h>
-+
- #endif /* __ASM_AVR32_PCI_H__ */
---- a/include/asm-avr32/pgalloc.h
-+++ b/include/asm-avr32/pgalloc.h
-@@ -8,65 +8,79 @@
- #ifndef __ASM_AVR32_PGALLOC_H
- #define __ASM_AVR32_PGALLOC_H
-
--#include <asm/processor.h>
--#include <linux/threads.h>
--#include <linux/slab.h>
--#include <linux/mm.h>
-+#include <linux/quicklist.h>
-+#include <asm/page.h>
-+#include <asm/pgtable.h>
-
--#define pmd_populate_kernel(mm, pmd, pte) \
-- set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
-+#define QUICK_PGD 0 /* Preserve kernel mappings over free */
-+#define QUICK_PT 1 /* Zero on free */
-
--static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
-+static inline void pmd_populate_kernel(struct mm_struct *mm,
-+ pmd_t *pmd, pte_t *pte)
-+{
-+ set_pmd(pmd, __pmd((unsigned long)pte));
-+}
-+
-+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
- pgtable_t pte)
- {
-- set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
-+ set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
- }
- #define pmd_pgtable(pmd) pmd_page(pmd)
-
-+static inline void pgd_ctor(void *x)
-+{
-+ pgd_t *pgd = x;
-+
-+ memcpy(pgd + USER_PTRS_PER_PGD,
-+ swapper_pg_dir + USER_PTRS_PER_PGD,
-+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-+}
-+
- /*
- * Allocate and free page tables
- */
--static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm)
-+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
- {
-- return kcalloc(USER_PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL);
-+ return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
- }
-
- static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
- {
-- kfree(pgd);
-+ quicklist_free(QUICK_PGD, NULL, pgd);
- }
-
- static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
- unsigned long address)
- {
-- pte_t *pte;
--
-- pte = (pte_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
--
-- return pte;
-+ return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
- }
-
--static inline struct page *pte_alloc_one(struct mm_struct *mm,
-+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
- unsigned long address)
- {
-- struct page *pte;
-+ struct page *page;
-+ void *pg;
-
-- pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
-- if (!pte)
-+ pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
-+ if (!pg)
- return NULL;
-- pgtable_page_ctor(pte);
-- return pte;
-+
-+ page = virt_to_page(pg);
-+ pgtable_page_ctor(page);
-+
-+ return page;
- }
-
- static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
- {
-- free_page((unsigned long)pte);
-+ quicklist_free(QUICK_PT, NULL, pte);
- }
-
- static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
- {
- pgtable_page_dtor(pte);
-- __free_page(pte);
-+ quicklist_free_page(QUICK_PT, NULL, pte);
- }
-
- #define __pte_free_tlb(tlb,pte) \
-@@ -75,6 +89,10 @@ do { \
- tlb_remove_page((tlb), pte); \
- } while (0)
-
--#define check_pgt_cache() do { } while(0)
-+static inline void check_pgt_cache(void)
-+{
-+ quicklist_trim(QUICK_PGD, NULL, 25, 16);
-+ quicklist_trim(QUICK_PT, NULL, 25, 16);
-+}
-
- #endif /* __ASM_AVR32_PGALLOC_H */
---- a/include/asm-avr32/pgtable.h
-+++ b/include/asm-avr32/pgtable.h
-@@ -129,13 +129,6 @@ extern struct page *empty_zero_page;
-
- #define _PAGE_FLAGS_CACHE_MASK (_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT)
-
--/* TODO: Check for saneness */
--/* User-mode page table flags (to be set in a pgd or pmd entry) */
--#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
-- | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
--/* Kernel-mode page table flags */
--#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
-- | _PAGE_ACCESSED | _PAGE_DIRTY)
- /* Flags that may be modified by software */
- #define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \
- | _PAGE_FLAGS_CACHE_MASK)
-@@ -254,10 +247,14 @@ static inline pte_t pte_mkyoung(pte_t pt
- }
-
- #define pmd_none(x) (!pmd_val(x))
--#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
--#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
--#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) \
-- != _KERNPG_TABLE)
-+#define pmd_present(x) (pmd_val(x))
-+
-+static inline void pmd_clear(pmd_t *pmdp)
-+{
-+ set_pmd(pmdp, __pmd(0));
-+}
-+
-+#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
-
- /*
- * Permanent address of a page. We don't support highmem, so this is
-@@ -295,19 +292,16 @@ static inline pte_t pte_modify(pte_t pte
-
- #define page_pte(page) page_pte_prot(page, __pgprot(0))
-
--#define pmd_page_vaddr(pmd) \
-- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
--
--#define pmd_page(pmd) (phys_to_page(pmd_val(pmd)))
-+#define pmd_page_vaddr(pmd) pmd_val(pmd)
-+#define pmd_page(pmd) (virt_to_page(pmd_val(pmd)))
-
- /* to find an entry in a page-table-directory. */
--#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
--#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
--#define pgd_offset_current(address) \
-- ((pgd_t *)__mfsr(SYSREG_PTBR) + pgd_index(address))
-+#define pgd_index(address) (((address) >> PGDIR_SHIFT) \
-+ & (PTRS_PER_PGD - 1))
-+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-
- /* to find an entry in a kernel page-table-directory */
--#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
- /* Find an entry in the third-level page table.. */
- #define pte_index(address) \
---- /dev/null
-+++ b/include/asm-avr32/serial.h
-@@ -0,0 +1,13 @@
-+#ifndef _ASM_SERIAL_H
-+#define _ASM_SERIAL_H
-+
-+/*
-+ * This assumes you have a 1.8432 MHz clock for your UART.
-+ *
-+ * It'd be nice if someone built a serial card with a 24.576 MHz
-+ * clock, since the 16550A is capable of handling a top speed of 1.5
-+ * megabits/second; but this requires the faster clock.
-+ */
-+#define BASE_BAUD (1843200 / 16)
-+
-+#endif /* _ASM_SERIAL_H */
---- a/include/asm-avr32/thread_info.h
-+++ b/include/asm-avr32/thread_info.h
-@@ -88,6 +88,7 @@ static inline struct thread_info *curren
- #define TIF_MEMDIE 6
- #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
- #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
-+#define TIF_FREEZE 29
- #define TIF_DEBUG 30 /* debugging enabled */
- #define TIF_USERSPACE 31 /* true if FS sets userspace */
-
---- a/include/asm-avr32/tlbflush.h
-+++ b/include/asm-avr32/tlbflush.h
-@@ -26,7 +26,6 @@ extern void flush_tlb_mm(struct mm_struc
- extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end);
- extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
--extern void __flush_tlb_page(unsigned long asid, unsigned long page);
-
- extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-
---- /dev/null
-+++ b/include/asm-avr32/xor.h
-@@ -0,0 +1,6 @@
-+#ifndef _ASM_XOR_H
-+#define _ASM_XOR_H
-+
-+#include <asm-generic/xor.h>
-+
-+#endif
---- /dev/null
-+++ b/include/linux/atmel_tc.h
-@@ -0,0 +1,252 @@
-+/*
-+ * Timer/Counter Unit (TC) registers.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef ATMEL_TC_H
-+#define ATMEL_TC_H
-+
-+#include <linux/compiler.h>
-+#include <linux/list.h>
-+
-+/*
-+ * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
-+ * three general-purpose 16-bit timers. These timers share one register bank.
-+ * Depending on the SOC, each timer may have its own clock and IRQ, or those
-+ * may be shared by the whole TC block.
-+ *
-+ * These TC blocks may have up to nine external pins: TCLK0..2 signals for
-+ * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
-+ * or triggering. Those pins need to be set up for use with the TC block,
-+ * else they will be used as GPIOs or for a different controller.
-+ *
-+ * Although we expect each TC block to have a platform_device node, those
-+ * nodes are not what drivers bind to. Instead, they ask for a specific
-+ * TC block, by number ... which is a common approach on systems with many
-+ * timers. Then they use clk_get() and platform_get_irq() to get clock and
-+ * IRQ resources.
-+ */
-+
-+struct clk;
-+
-+/**
-+ * struct atmel_tc - information about a Timer/Counter Block
-+ * @pdev: physical device
-+ * @iomem: resource associated with the I/O register
-+ * @regs: mapping through which the I/O registers can be accessed
-+ * @irq: irq for each of the three channels
-+ * @clk: internal clock source for each of the three channels
-+ * @node: list node, for tclib internal use
-+ *
-+ * On some platforms, each TC channel has its own clocks and IRQs,
-+ * while on others, all TC channels share the same clock and IRQ.
-+ * Drivers should clk_enable() all the clocks they need even though
-+ * all the entries in @clk may point to the same physical clock.
-+ * Likewise, drivers should request irqs independently for each
-+ * channel, but they must use IRQF_SHARED in case some of the entries
-+ * in @irq are actually the same IRQ.
-+ */
-+struct atmel_tc {
-+ struct platform_device *pdev;
-+ struct resource *iomem;
-+ void __iomem *regs;
-+ int irq[3];
-+ struct clk *clk[3];
-+ struct list_head node;
-+};
-+
-+extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name);
-+extern void atmel_tc_free(struct atmel_tc *tc);
-+
-+/* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
-+extern const u8 atmel_tc_divisors[5];
-+
-+
-+/*
-+ * Two registers have block-wide controls. These are: configuring the three
-+ * "external" clocks (or event sources) used by the timer channels; and
-+ * synchronizing the timers by resetting them all at once.
-+ *
-+ * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
-+ * signals. Or, it can mean "external to timer", using the TIOA output from
-+ * one of the other two timers that's being run in waveform mode.
-+ */
-+
-+#define ATMEL_TC_BCR 0xc0 /* TC Block Control Register */
-+#define ATMEL_TC_SYNC (1 << 0) /* synchronize timers */
-+
-+#define ATMEL_TC_BMR 0xc4 /* TC Block Mode Register */
-+#define ATMEL_TC_TC0XC0S (3 << 0) /* external clock 0 source */
-+#define ATMEL_TC_TC0XC0S_TCLK0 (0 << 0)
-+#define ATMEL_TC_TC0XC0S_NONE (1 << 0)
-+#define ATMEL_TC_TC0XC0S_TIOA1 (2 << 0)
-+#define ATMEL_TC_TC0XC0S_TIOA2 (3 << 0)
-+#define ATMEL_TC_TC1XC1S (3 << 2) /* external clock 1 source */
-+#define ATMEL_TC_TC1XC1S_TCLK1 (0 << 2)
-+#define ATMEL_TC_TC1XC1S_NONE (1 << 2)
-+#define ATMEL_TC_TC1XC1S_TIOA0 (2 << 2)
-+#define ATMEL_TC_TC1XC1S_TIOA2 (3 << 2)
-+#define ATMEL_TC_TC2XC2S (3 << 4) /* external clock 2 source */
-+#define ATMEL_TC_TC2XC2S_TCLK2 (0 << 4)
-+#define ATMEL_TC_TC2XC2S_NONE (1 << 4)
-+#define ATMEL_TC_TC2XC2S_TIOA0 (2 << 4)
-+#define ATMEL_TC_TC2XC2S_TIOA1 (3 << 4)
-+
-+
-+/*
-+ * Each TC block has three "channels", each with one counter and controls.
-+ *
-+ * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
-+ * when it's not "external") is silicon-specific. AT91 platforms use one
-+ * set of definitions; AVR32 platforms use a different set. Don't hard-wire
-+ * such knowledge into your code, use the global "atmel_tc_divisors" ...
-+ * where index N is the divisor for clock N+1, else zero to indicate it uses
-+ * the 32 KiHz clock.
-+ *
-+ * The timers can be chained in various ways, and operated in "waveform"
-+ * generation mode (including PWM) or "capture" mode (to time events). In
-+ * both modes, behavior can be configured in many ways.
-+ *
-+ * Each timer has two I/O pins, TIOA and TIOB. Waveform mode uses TIOA as a
-+ * PWM output, and TIOB as either another PWM or as a trigger. Capture mode
-+ * uses them only as inputs.
-+ */
-+#define ATMEL_TC_CHAN(idx) ((idx)*0x40)
-+#define ATMEL_TC_REG(idx, reg) (ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
-+
-+#define ATMEL_TC_CCR 0x00 /* Channel Control Register */
-+#define ATMEL_TC_CLKEN (1 << 0) /* clock enable */
-+#define ATMEL_TC_CLKDIS (1 << 1) /* clock disable */
-+#define ATMEL_TC_SWTRG (1 << 2) /* software trigger */
-+
-+#define ATMEL_TC_CMR 0x04 /* Channel Mode Register */
-+
-+/* Both modes share some CMR bits */
-+#define ATMEL_TC_TCCLKS (7 << 0) /* clock source */
-+#define ATMEL_TC_TIMER_CLOCK1 (0 << 0)
-+#define ATMEL_TC_TIMER_CLOCK2 (1 << 0)
-+#define ATMEL_TC_TIMER_CLOCK3 (2 << 0)
-+#define ATMEL_TC_TIMER_CLOCK4 (3 << 0)
-+#define ATMEL_TC_TIMER_CLOCK5 (4 << 0)
-+#define ATMEL_TC_XC0 (5 << 0)
-+#define ATMEL_TC_XC1 (6 << 0)
-+#define ATMEL_TC_XC2 (7 << 0)
-+#define ATMEL_TC_CLKI (1 << 3) /* clock invert */
-+#define ATMEL_TC_BURST (3 << 4) /* clock gating */
-+#define ATMEL_TC_GATE_NONE (0 << 4)
-+#define ATMEL_TC_GATE_XC0 (1 << 4)
-+#define ATMEL_TC_GATE_XC1 (2 << 4)
-+#define ATMEL_TC_GATE_XC2 (3 << 4)
-+#define ATMEL_TC_WAVE (1 << 15) /* true = Waveform mode */
-+
-+/* CAPTURE mode CMR bits */
-+#define ATMEL_TC_LDBSTOP (1 << 6) /* counter stops on RB load */
-+#define ATMEL_TC_LDBDIS (1 << 7) /* counter disable on RB load */
-+#define ATMEL_TC_ETRGEDG (3 << 8) /* external trigger edge */
-+#define ATMEL_TC_ETRGEDG_NONE (0 << 8)
-+#define ATMEL_TC_ETRGEDG_RISING (1 << 8)
-+#define ATMEL_TC_ETRGEDG_FALLING (2 << 8)
-+#define ATMEL_TC_ETRGEDG_BOTH (3 << 8)
-+#define ATMEL_TC_ABETRG (1 << 10) /* external trigger is TIOA? */
-+#define ATMEL_TC_CPCTRG (1 << 14) /* RC compare trigger enable */
-+#define ATMEL_TC_LDRA (3 << 16) /* RA loading edge (of TIOA) */
-+#define ATMEL_TC_LDRA_NONE (0 << 16)
-+#define ATMEL_TC_LDRA_RISING (1 << 16)
-+#define ATMEL_TC_LDRA_FALLING (2 << 16)
-+#define ATMEL_TC_LDRA_BOTH (3 << 16)
-+#define ATMEL_TC_LDRB (3 << 18) /* RB loading edge (of TIOA) */
-+#define ATMEL_TC_LDRB_NONE (0 << 18)
-+#define ATMEL_TC_LDRB_RISING (1 << 18)
-+#define ATMEL_TC_LDRB_FALLING (2 << 18)
-+#define ATMEL_TC_LDRB_BOTH (3 << 18)
-+
-+/* WAVEFORM mode CMR bits */
-+#define ATMEL_TC_CPCSTOP (1 << 6) /* RC compare stops counter */
-+#define ATMEL_TC_CPCDIS (1 << 7) /* RC compare disables counter */
-+#define ATMEL_TC_EEVTEDG (3 << 8) /* external event edge */
-+#define ATMEL_TC_EEVTEDG_NONE (0 << 8)
-+#define ATMEL_TC_EEVTEDG_RISING (1 << 8)
-+#define ATMEL_TC_EEVTEDG_FALLING (2 << 8)
-+#define ATMEL_TC_EEVTEDG_BOTH (3 << 8)
-+#define ATMEL_TC_EEVT (3 << 10) /* external event source */
-+#define ATMEL_TC_EEVT_TIOB (0 << 10)
-+#define ATMEL_TC_EEVT_XC0 (1 << 10)
-+#define ATMEL_TC_EEVT_XC1 (2 << 10)
-+#define ATMEL_TC_EEVT_XC2 (3 << 10)
-+#define ATMEL_TC_ENETRG (1 << 12) /* external event is trigger */
-+#define ATMEL_TC_WAVESEL (3 << 13) /* waveform type */
-+#define ATMEL_TC_WAVESEL_UP (0 << 13)
-+#define ATMEL_TC_WAVESEL_UPDOWN (1 << 13)
-+#define ATMEL_TC_WAVESEL_UP_AUTO (2 << 13)
-+#define ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
-+#define ATMEL_TC_ACPA (3 << 16) /* RA compare changes TIOA */
-+#define ATMEL_TC_ACPA_NONE (0 << 16)
-+#define ATMEL_TC_ACPA_SET (1 << 16)
-+#define ATMEL_TC_ACPA_CLEAR (2 << 16)
-+#define ATMEL_TC_ACPA_TOGGLE (3 << 16)
-+#define ATMEL_TC_ACPC (3 << 18) /* RC compare changes TIOA */
-+#define ATMEL_TC_ACPC_NONE (0 << 18)
-+#define ATMEL_TC_ACPC_SET (1 << 18)
-+#define ATMEL_TC_ACPC_CLEAR (2 << 18)
-+#define ATMEL_TC_ACPC_TOGGLE (3 << 18)
-+#define ATMEL_TC_AEEVT (3 << 20) /* external event changes TIOA */
-+#define ATMEL_TC_AEEVT_NONE (0 << 20)
-+#define ATMEL_TC_AEEVT_SET (1 << 20)
-+#define ATMEL_TC_AEEVT_CLEAR (2 << 20)
-+#define ATMEL_TC_AEEVT_TOGGLE (3 << 20)
-+#define ATMEL_TC_ASWTRG (3 << 22) /* software trigger changes TIOA */
-+#define ATMEL_TC_ASWTRG_NONE (0 << 22)
-+#define ATMEL_TC_ASWTRG_SET (1 << 22)
-+#define ATMEL_TC_ASWTRG_CLEAR (2 << 22)
-+#define ATMEL_TC_ASWTRG_TOGGLE (3 << 22)
-+#define ATMEL_TC_BCPB (3 << 24) /* RB compare changes TIOB */
-+#define ATMEL_TC_BCPB_NONE (0 << 24)
-+#define ATMEL_TC_BCPB_SET (1 << 24)
-+#define ATMEL_TC_BCPB_CLEAR (2 << 24)
-+#define ATMEL_TC_BCPB_TOGGLE (3 << 24)
-+#define ATMEL_TC_BCPC (3 << 26) /* RC compare changes TIOB */
-+#define ATMEL_TC_BCPC_NONE (0 << 26)
-+#define ATMEL_TC_BCPC_SET (1 << 26)
-+#define ATMEL_TC_BCPC_CLEAR (2 << 26)
-+#define ATMEL_TC_BCPC_TOGGLE (3 << 26)
-+#define ATMEL_TC_BEEVT (3 << 28) /* external event changes TIOB */
-+#define ATMEL_TC_BEEVT_NONE (0 << 28)
-+#define ATMEL_TC_BEEVT_SET (1 << 28)
-+#define ATMEL_TC_BEEVT_CLEAR (2 << 28)
-+#define ATMEL_TC_BEEVT_TOGGLE (3 << 28)
-+#define ATMEL_TC_BSWTRG (3 << 30) /* software trigger changes TIOB */
-+#define ATMEL_TC_BSWTRG_NONE (0 << 30)
-+#define ATMEL_TC_BSWTRG_SET (1 << 30)
-+#define ATMEL_TC_BSWTRG_CLEAR (2 << 30)
-+#define ATMEL_TC_BSWTRG_TOGGLE (3 << 30)
-+
-+#define ATMEL_TC_CV 0x10 /* counter Value */
-+#define ATMEL_TC_RA 0x14 /* register A */
-+#define ATMEL_TC_RB 0x18 /* register B */
-+#define ATMEL_TC_RC 0x1c /* register C */
-+
-+#define ATMEL_TC_SR 0x20 /* status (read-only) */
-+/* Status-only flags */
-+#define ATMEL_TC_CLKSTA (1 << 16) /* clock enabled */
-+#define ATMEL_TC_MTIOA (1 << 17) /* TIOA mirror */
-+#define ATMEL_TC_MTIOB (1 << 18) /* TIOB mirror */
-+
-+#define ATMEL_TC_IER 0x24 /* interrupt enable (write-only) */
-+#define ATMEL_TC_IDR 0x28 /* interrupt disable (write-only) */
-+#define ATMEL_TC_IMR 0x2c /* interrupt mask (read-only) */
-+
-+/* Status and IRQ flags */
-+#define ATMEL_TC_COVFS (1 << 0) /* counter overflow */
-+#define ATMEL_TC_LOVRS (1 << 1) /* load overrun */
-+#define ATMEL_TC_CPAS (1 << 2) /* RA compare */
-+#define ATMEL_TC_CPBS (1 << 3) /* RB compare */
-+#define ATMEL_TC_CPCS (1 << 4) /* RC compare */
-+#define ATMEL_TC_LDRAS (1 << 5) /* RA loading */
-+#define ATMEL_TC_LDRBS (1 << 6) /* RB loading */
-+#define ATMEL_TC_ETRGS (1 << 7) /* external trigger */
-+
-+#endif
---- a/include/linux/fs.h
-+++ b/include/linux/fs.h
-@@ -1692,6 +1692,8 @@ static inline void invalidate_remote_ino
- extern int invalidate_inode_pages2(struct address_space *mapping);
- extern int invalidate_inode_pages2_range(struct address_space *mapping,
- pgoff_t start, pgoff_t end);
-+extern void generic_sync_sb_inodes(struct super_block *sb,
-+ struct writeback_control *wbc);
- extern int write_inode_now(struct inode *, int);
- extern int filemap_fdatawrite(struct address_space *);
- extern int filemap_flush(struct address_space *);
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -188,6 +188,7 @@ struct uart_ops {
- void (*break_ctl)(struct uart_port *, int ctl);
- int (*startup)(struct uart_port *);
- void (*shutdown)(struct uart_port *);
-+ void (*flush_buffer)(struct uart_port *);
- void (*set_termios)(struct uart_port *, struct ktermios *new,
- struct ktermios *old);
- void (*pm)(struct uart_port *, unsigned int state,
---- /dev/null
-+++ b/include/linux/usb/atmel_usba_udc.h
-@@ -0,0 +1,22 @@
-+/*
-+ * Platform data definitions for Atmel USBA gadget driver.
-+ */
-+#ifndef __LINUX_USB_USBA_H
-+#define __LINUX_USB_USBA_H
-+
-+struct usba_ep_data {
-+ char *name;
-+ int index;
-+ int fifo_size;
-+ int nr_banks;
-+ int can_dma;
-+ int can_isoc;
-+};
-+
-+struct usba_platform_data {
-+ int vbus_pin;
-+ int num_ep;
-+ struct usba_ep_data ep[0];
-+};
-+
-+#endif /* __LINUX_USB_USBA_H */
---- a/mm/Kconfig
-+++ b/mm/Kconfig
-@@ -187,7 +187,7 @@ config BOUNCE
- config NR_QUICK
- int
- depends on QUICKLIST
-- default "2" if SUPERH
-+ default "2" if SUPERH || AVR32
- default "1"
-
- config VIRT_TO_BUS
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig"
-
- source "sound/arm/Kconfig"
-
-+source "sound/avr32/Kconfig"
-+
- if SPI
- source "sound/spi/Kconfig"
- endif
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
- obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
-- sparc/ spi/ parisc/ pcmcia/ mips/ soc/
-+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
- obj-$(CONFIG_SND_AOA) += aoa/
-
- # This one must be compilable even if sound is configured out
---- /dev/null
-+++ b/sound/avr32/Kconfig
-@@ -0,0 +1,11 @@
-+menu "AVR32 devices"
-+ depends on SND != n && AVR32
-+
-+config SND_ATMEL_AC97
-+ tristate "Atmel AC97 Controller Driver"
-+ select SND_PCM
-+ select SND_AC97_CODEC
-+ help
-+ ALSA sound driver for the Atmel AC97 controller.
-+
-+endmenu
---- /dev/null
-+++ b/sound/avr32/Makefile
-@@ -0,0 +1,3 @@
-+snd-atmel-ac97-objs := ac97c.o
-+
-+obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
---- /dev/null
-+++ b/sound/avr32/ac97c.c
-@@ -0,0 +1,951 @@
-+/*
-+ * Driver for the Atmel AC97 controller
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/gpio.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+#include <linux/io.h>
-+
-+#include <sound/core.h>
-+#include <sound/initval.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/memalloc.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/dma-controller.h>
-+
-+#include "ac97c.h"
-+
-+/* Serialize access to opened */
-+static DEFINE_MUTEX(opened_mutex);
-+
-+struct atmel_ac97_dma_info {
-+ struct dma_request_cyclic req_tx;
-+ struct dma_request_cyclic req_rx;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+ unsigned short controller;
-+};
-+
-+struct atmel_ac97 {
-+ /* Serialize access to opened */
-+ spinlock_t lock;
-+ void __iomem *regs;
-+ struct snd_pcm_substream *playback_substream;
-+ struct snd_pcm_substream *capture_substream;
-+ struct snd_card *card;
-+ struct snd_pcm *pcm;
-+ struct snd_ac97 *ac97;
-+ struct snd_ac97_bus *ac97_bus;
-+ int opened;
-+ int period;
-+ int reset_pin;
-+ u64 cur_format;
-+ unsigned int cur_rate;
-+ struct clk *mck;
-+ struct platform_device *pdev;
-+ struct atmel_ac97_dma_info dma;
-+};
-+
-+#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
-+
-+#define ac97c_writel(chip, reg, val) \
-+ __raw_writel((val), (chip)->regs + AC97C_##reg)
-+#define ac97c_readl(chip, reg) \
-+ __raw_readl((chip)->regs + AC97C_##reg)
-+
-+/*
-+ * PCM part
-+ */
-+static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED
-+ | SNDRV_PCM_INFO_MMAP
-+ | SNDRV_PCM_INFO_MMAP_VALID
-+ | SNDRV_PCM_INFO_BLOCK_TRANSFER
-+ | SNDRV_PCM_INFO_JOINT_DUPLEX),
-+ .formats = (SNDRV_PCM_FMTBIT_S16_BE
-+ | SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
-+ .rate_min = 4000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 6,
-+ .buffer_bytes_max = 64*1024,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 4095,
-+ .periods_min = 8,
-+ .periods_max = 1024,
-+};
-+
-+static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED
-+ | SNDRV_PCM_INFO_MMAP
-+ | SNDRV_PCM_INFO_MMAP_VALID
-+ | SNDRV_PCM_INFO_BLOCK_TRANSFER
-+ | SNDRV_PCM_INFO_JOINT_DUPLEX),
-+ .formats = (SNDRV_PCM_FMTBIT_S16_BE
-+ | SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
-+ .rate_min = 4000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64*1024,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 4095,
-+ .periods_min = 8,
-+ .periods_max = 1024,
-+};
-+
-+/*
-+ * PCM functions
-+ */
-+static int
-+snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ mutex_lock(&opened_mutex);
-+ chip->opened++;
-+ runtime->hw = snd_atmel_ac97_playback_hw;
-+ if (chip->cur_rate) {
-+ runtime->hw.rate_min = chip->cur_rate;
-+ runtime->hw.rate_max = chip->cur_rate;
-+ }
-+ if (chip->cur_format)
-+ runtime->hw.formats = (1ULL << chip->cur_format);
-+ mutex_unlock(&opened_mutex);
-+ chip->playback_substream = substream;
-+ chip->period = 0;
-+ return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ mutex_lock(&opened_mutex);
-+ chip->opened++;
-+ runtime->hw = snd_atmel_ac97_capture_hw;
-+ if (chip->cur_rate) {
-+ runtime->hw.rate_min = chip->cur_rate;
-+ runtime->hw.rate_max = chip->cur_rate;
-+ }
-+ if (chip->cur_format)
-+ runtime->hw.formats = (1ULL << chip->cur_format);
-+ mutex_unlock(&opened_mutex);
-+ chip->capture_substream = substream;
-+ chip->period = 0;
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ mutex_lock(&opened_mutex);
-+ chip->opened--;
-+ if (!chip->opened) {
-+ chip->cur_rate = 0;
-+ chip->cur_format = 0;
-+ }
-+ mutex_unlock(&opened_mutex);
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ mutex_lock(&opened_mutex);
-+ chip->opened--;
-+ if (!chip->opened) {
-+ chip->cur_rate = 0;
-+ chip->cur_format = 0;
-+ }
-+ mutex_unlock(&opened_mutex);
-+ return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ int err;
-+
-+ err = snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+ if (err < 0)
-+ return err;
-+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
-+
-+ return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ int err;
-+
-+ err = snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+ if (err < 0)
-+ return err;
-+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
-+{
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
-+{
-+
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size = frames_to_bytes(runtime, runtime->period_size);
-+ unsigned long word = 0;
-+ unsigned long buffer_size = 0;
-+
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size * 2, DMA_TO_DEVICE);
-+
-+ /* Assign slots to channels */
-+ switch (substream->runtime->channels) {
-+ case 1:
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+ break;
-+ case 2:
-+ /* Assign Left and Right slot to Channel A */
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+ break;
-+ default:
-+ /* TODO: support more than two channels */
-+ return -EINVAL;
-+ break;
-+ }
-+ ac97c_writel(chip, OCA, word);
-+
-+ /* Configure sample format and size */
-+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+ switch (runtime->format) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ word |= AC97C_CMR_CEM_LITTLE;
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
-+ default:
-+ word &= ~AC97C_CMR_CEM_LITTLE;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, word);
-+
-+ /* Set variable rate if needed */
-+ if (runtime->rate != 48000) {
-+ word = ac97c_readl(chip, MR);
-+ word |= AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ } else {
-+ /* Clear Variable Rate Bit */
-+ word = ac97c_readl(chip, MR);
-+ word &= ~AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ }
-+
-+ /* Set rate */
-+ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
-+
-+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+ runtime->periods;
-+
-+ chip->dma.req_tx.buffer_size = buffer_size;
-+ chip->dma.req_tx.periods = runtime->periods;
-+
-+ BUG_ON(chip->dma.req_tx.buffer_size !=
-+ (chip->dma.req_tx.periods *
-+ frames_to_bytes(runtime, runtime->period_size)));
-+
-+ chip->dma.req_tx.buffer_start = runtime->dma_addr;
-+ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
-+ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
-+ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
-+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_tx.dev_id = chip;
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size = frames_to_bytes(runtime, runtime->period_size);
-+ unsigned long word = 0;
-+ unsigned long buffer_size = 0;
-+
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size * 2, DMA_FROM_DEVICE);
-+
-+ /* Assign slots to channels */
-+ switch (substream->runtime->channels) {
-+ case 1:
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+ break;
-+ case 2:
-+ /* Assign Left and Right slot to Channel A */
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+ break;
-+ default:
-+ /* TODO: support more than two channels */
-+ return -EINVAL;
-+ break;
-+ }
-+ ac97c_writel(chip, ICA, word);
-+
-+ /* Configure sample format and size */
-+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+ switch (runtime->format) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ word |= AC97C_CMR_CEM_LITTLE;
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE:
-+ default:
-+ word &= ~(AC97C_CMR_CEM_LITTLE);
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, word);
-+
-+ /* Set variable rate if needed */
-+ if (runtime->rate != 48000) {
-+ word = ac97c_readl(chip, MR);
-+ word |= AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ } else {
-+ /* Clear Variable Rate Bit */
-+ word = ac97c_readl(chip, MR);
-+ word &= ~(AC97C_MR_VRA);
-+ ac97c_writel(chip, MR, word);
-+ }
-+
-+ /* Set rate */
-+ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
-+
-+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+ runtime->periods;
-+
-+ chip->dma.req_rx.buffer_size = buffer_size;
-+ chip->dma.req_rx.periods = runtime->periods;
-+
-+ BUG_ON(chip->dma.req_rx.buffer_size !=
-+ (chip->dma.req_rx.periods *
-+ frames_to_bytes(runtime, runtime->period_size)));
-+
-+ chip->dma.req_rx.buffer_start = runtime->dma_addr;
-+ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
-+ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
-+ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
-+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_rx.dev_id = chip;
-+
-+ return 0;
-+}
-+
-+ static int
-+snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ unsigned long camr;
-+ int flags, err = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+ camr = ac97c_readl(chip, CAMR);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
-+ &chip->dma.req_tx);
-+ dma_start_request(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ camr |= AC97C_CMR_CENA;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ err = dma_stop_request(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ if (chip->opened <= 1)
-+ camr &= ~AC97C_CMR_CENA;
-+ break;
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, camr);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+ return err;
-+}
-+
-+ static int
-+snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ unsigned long camr;
-+ int flags, err = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+ camr = ac97c_readl(chip, CAMR);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
-+ &chip->dma.req_rx);
-+ dma_start_request(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ camr |= AC97C_CMR_CENA;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ err = dma_stop_request(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ mutex_lock(&opened_mutex);
-+ if (chip->opened <= 1)
-+ camr &= ~AC97C_CMR_CENA;
-+ mutex_unlock(&opened_mutex);
-+ break;
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, camr);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+ return err;
-+}
-+
-+ static snd_pcm_uframes_t
-+snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+ bytes = (dma_get_current_pos
-+ (chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel) - runtime->dma_addr);
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+ return pos;
-+}
-+
-+ static snd_pcm_uframes_t
-+snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+ bytes = (dma_get_current_pos
-+ (chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel)
-+ - runtime->dma_addr);
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+
-+ return pos;
-+}
-+
-+static struct snd_pcm_ops atmel_ac97_playback_ops = {
-+ .open = snd_atmel_ac97_playback_open,
-+ .close = snd_atmel_ac97_playback_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_atmel_ac97_playback_hw_params,
-+ .hw_free = snd_atmel_ac97_playback_hw_free,
-+ .prepare = snd_atmel_ac97_playback_prepare,
-+ .trigger = snd_atmel_ac97_playback_trigger,
-+ .pointer = snd_atmel_ac97_playback_pointer,
-+};
-+
-+static struct snd_pcm_ops atmel_ac97_capture_ops = {
-+ .open = snd_atmel_ac97_capture_open,
-+ .close = snd_atmel_ac97_capture_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_atmel_ac97_capture_hw_params,
-+ .hw_free = snd_atmel_ac97_capture_hw_free,
-+ .prepare = snd_atmel_ac97_capture_prepare,
-+ .trigger = snd_atmel_ac97_capture_trigger,
-+ .pointer = snd_atmel_ac97_capture_pointer,
-+};
-+
-+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
-+ /* Playback */
-+ {
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
-+ | (1 << AC97_SLOT_PCM_RIGHT)
-+ | (1 << AC97_SLOT_PCM_CENTER)
-+ | (1 << AC97_SLOT_PCM_SLEFT)
-+ | (1 << AC97_SLOT_PCM_SRIGHT)
-+ | (1 << AC97_SLOT_LFE)),
-+ } }
-+ },
-+ /* PCM in */
-+ {
-+ .stream = 1,
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
-+ | (1 << AC97_SLOT_PCM_RIGHT)),
-+ } }
-+ },
-+ /* Mic in */
-+ {
-+ .stream = 1,
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = (1<<AC97_SLOT_MIC),
-+ } }
-+ },
-+};
-+
-+static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
-+{
-+ struct snd_pcm *pcm;
-+ int err;
-+
-+ err = snd_ac97_pcm_assign(chip->ac97_bus,
-+ ARRAY_SIZE(atmel_ac97_pcm_defs),
-+ atmel_ac97_pcm_defs);
-+ if (err)
-+ return err;
-+
-+ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
-+ if (err)
-+ return err;
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
-+ &atmel_ac97_playback_ops);
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
-+ &atmel_ac97_capture_ops);
-+
-+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
-+ &chip->pdev->dev,
-+ 128 * 1024, 128 * 1024);
-+
-+ pcm->private_data = chip;
-+ pcm->info_flags = 0;
-+ strcpy(pcm->name, "Atmel-AC97");
-+ chip->pcm = pcm;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Mixer part.
-+ */
-+static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
-+{
-+ int err;
-+ struct snd_ac97_template template;
-+
-+ memset(&template, 0, sizeof(template));
-+ template.private_data = chip;
-+ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
-+
-+ return err;
-+}
-+
-+static void atmel_ac97_error(struct dma_request *_req)
-+{
-+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+ struct atmel_ac97 *chip = req->dev_id;
-+
-+ dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
-+ req->req.channel);
-+}
-+
-+static void atmel_ac97_block_complete(struct dma_request *_req)
-+{
-+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+ struct atmel_ac97 *chip = req->dev_id;
-+ if (req->periph_id == chip->dma.tx_periph_id)
-+ snd_pcm_period_elapsed(chip->playback_substream);
-+ else
-+ snd_pcm_period_elapsed(chip->capture_substream);
-+}
-+
-+/*
-+ * Codec part.
-+ */
-+static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
-+ unsigned short val)
-+{
-+ struct atmel_ac97 *chip = get_chip(ac97);
-+ unsigned long word;
-+ int timeout = 40;
-+
-+ word = (reg & 0x7f) << 16 | val;
-+
-+ do {
-+ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
-+ ac97c_writel(chip, COTHR, word);
-+ return;
-+ }
-+ udelay(1);
-+ } while (--timeout);
-+
-+ dev_dbg(&chip->pdev->dev, "codec write timeout\n");
-+}
-+
-+static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
-+ unsigned short reg)
-+{
-+ struct atmel_ac97 *chip = get_chip(ac97);
-+ unsigned long word;
-+ int timeout = 40;
-+ int write = 10;
-+
-+ word = (0x80 | (reg & 0x7f)) << 16;
-+
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
-+ ac97c_readl(chip, CORHR);
-+
-+retry_write:
-+ timeout = 40;
-+
-+ do {
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
-+ ac97c_writel(chip, COTHR, word);
-+ goto read_reg;
-+ }
-+ udelay(10);
-+ } while (--timeout);
-+
-+ if (!--write)
-+ goto timed_out;
-+ goto retry_write;
-+
-+read_reg:
-+ do {
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
-+ unsigned short val = ac97c_readl(chip, CORHR);
-+ return val;
-+ }
-+ udelay(10);
-+ } while (--timeout);
-+
-+ if (!--write)
-+ goto timed_out;
-+ goto retry_write;
-+
-+timed_out:
-+ dev_dbg(&chip->pdev->dev, "codec read timeout\n");
-+ return 0xffff;
-+}
-+
-+static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
-+{
-+ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
-+ if (chip->reset_pin >= 0) {
-+ gpio_set_value(chip->reset_pin, 0);
-+ /* AC97 v2.2 specifications says minimum 1 us. */
-+ udelay(5);
-+ gpio_set_value(chip->reset_pin, 1);
-+ }
-+
-+ ac97c_writel(chip, MR, AC97C_MR_WRST);
-+ mdelay(1);
-+ ac97c_writel(chip, MR, AC97C_MR_ENA);
-+}
-+
-+static void snd_atmel_ac97_destroy(struct snd_card *card)
-+{
-+ struct atmel_ac97 *chip = get_chip(card);
-+
-+ if (chip->regs)
-+ iounmap(chip->regs);
-+
-+ if (chip->mck) {
-+ clk_disable(chip->mck);
-+ clk_put(chip->mck);
-+ }
-+
-+ if (chip->dma.req_tx.req.dmac) {
-+ dma_release_channel(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ }
-+ if (chip->dma.req_rx.req.dmac) {
-+ dma_release_channel(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ }
-+}
-+
-+static int __devinit snd_atmel_ac97_create(struct snd_card *card,
-+ struct platform_device *pdev)
-+{
-+ static struct snd_ac97_bus_ops ops = {
-+ .write = snd_atmel_ac97_write,
-+ .read = snd_atmel_ac97_read,
-+ };
-+ struct atmel_ac97 *chip = get_chip(card);
-+ struct ac97c_platform_data *pdata;
-+ struct resource *regs;
-+ struct clk *mck;
-+ int err;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ pdata = pdev->dev.platform_data;
-+ if (!pdata)
-+ return -ENXIO;
-+
-+ chip->reset_pin = pdata->reset_pin;
-+
-+ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
-+ if (chip->reset_pin >= 0) {
-+ if (gpio_request(chip->reset_pin, chip->card->shortname)) {
-+ dev_dbg(&pdev->dev, "ac97: reset pin not available\n");
-+ chip->reset_pin = -1;
-+ } else {
-+ gpio_direction_output(chip->reset_pin, 1);
-+ }
-+ }
-+
-+ chip->dma.rx_periph_id = pdata->dma_rx_periph_id;
-+ chip->dma.tx_periph_id = pdata->dma_tx_periph_id;
-+ chip->dma.controller = pdata->dma_controller_id;
-+
-+ mck = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(mck))
-+ return PTR_ERR(mck);
-+ clk_enable(mck);
-+ chip->mck = mck;
-+
-+ card->private_free = snd_atmel_ac97_destroy;
-+
-+ spin_lock_init(&chip->lock);
-+ chip->card = card;
-+ chip->pdev = pdev;
-+
-+ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!chip->regs)
-+ return -ENOMEM;
-+
-+ snd_card_set_dev(card, &pdev->dev);
-+
-+ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
-+
-+ return err;
-+}
-+
-+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
-+{
-+ static int dev;
-+ struct snd_card *card;
-+ struct atmel_ac97 *chip;
-+ int err;
-+ int ch;
-+
-+ mutex_init(&opened_mutex);
-+
-+ err = -ENOMEM;
-+ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
-+ THIS_MODULE, sizeof(struct atmel_ac97));
-+ if (!card)
-+ goto out;
-+
-+ chip = get_chip(card);
-+ chip->reset_pin = -1;
-+
-+ err = snd_atmel_ac97_create(card, pdev);
-+ if (err)
-+ goto out_free_card;
-+
-+ snd_atmel_ac97_reset(chip);
-+
-+ err = snd_atmel_ac97_mixer_new(chip);
-+ if (err)
-+ goto out_free_card;
-+
-+ err = snd_atmel_ac97_pcm_new(chip);
-+ if (err)
-+ goto out_free_card;
-+
-+ chip->dma.req_tx.req.dmac = find_dma_controller(chip->dma.controller);
-+ if (!chip->dma.req_tx.req.dmac) {
-+ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
-+ err = -ENODEV;
-+ goto out_free_card;
-+ }
-+ chip->dma.req_rx.req.dmac = find_dma_controller(chip->dma.controller);
-+ if (!chip->dma.req_rx.req.dmac) {
-+ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
-+ err = -ENODEV;
-+ goto out_free_card;
-+ }
-+
-+ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
-+ if (ch < 0) {
-+ dev_dbg(&chip->pdev->dev,
-+ "could not allocate TX DMA channel\n");
-+ err = ch;
-+ goto out_free_card;
-+ }
-+ chip->dma.req_tx.req.channel = ch;
-+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
-+ chip->dma.req_tx.req.error = atmel_ac97_error;
-+
-+ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
-+ if (ch < 0) {
-+ dev_dbg(&chip->pdev->dev,
-+ "could not allocate RX DMA channel\n");
-+ err = ch;
-+ goto out_free_card;
-+ }
-+ chip->dma.req_rx.req.channel = ch;
-+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
-+ chip->dma.req_rx.req.error = atmel_ac97_error;
-+
-+ strcpy(card->driver, "atmel_ac97c");
-+ strcpy(card->shortname, "atmel_ac97c");
-+ sprintf(card->longname, "Atmel AVR32 AC97 controller");
-+
-+ err = snd_card_register(card);
-+ if (err)
-+ goto out_free_card;
-+
-+ platform_set_drvdata(pdev, card);
-+ dev++;
-+
-+ dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
-+ chip->regs);
-+
-+ return 0;
-+
-+out_free_card:
-+ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
-+ if (chip->reset_pin >= 0)
-+ gpio_free(chip->reset_pin);
-+ snd_card_free(card);
-+out:
-+ return err;
-+}
-+
-+#ifdef CONFIG_PM
-+ static int
-+snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
-+{
-+ struct snd_card *card = platform_get_drvdata(pdev);
-+ struct atmel_ac97 *chip = card->private_data;
-+
-+ clk_disable(chip->mck);
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_resume(struct platform_device *pdev)
-+{
-+ struct snd_card *card = platform_get_drvdata(pdev);
-+ struct atmel_ac97 *chip = card->private_data;
-+
-+ clk_enable(chip->mck);
-+
-+ return 0;
-+}
-+#else
-+#define snd_atmel_ac97_suspend NULL
-+#define snd_atmel_ac97_resume NULL
-+#endif
-+
-+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
-+{
-+ struct snd_card *card = platform_get_drvdata(pdev);
-+ struct atmel_ac97 *chip = get_chip(card);
-+
-+ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
-+ if (chip->reset_pin >= 0)
-+ gpio_free(chip->reset_pin);
-+ snd_card_free(card);
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_ac97_driver = {
-+ .remove = __devexit_p(snd_atmel_ac97_remove),
-+ .driver = {
-+ .name = "atmel_ac97c",
-+ },
-+ .suspend = snd_atmel_ac97_suspend,
-+ .resume = snd_atmel_ac97_resume,
-+};
-+
-+static int __init atmel_ac97_init(void)
-+{
-+ return platform_driver_probe(&atmel_ac97_driver,
-+ snd_atmel_ac97_probe);
-+}
-+module_init(atmel_ac97_init);
-+
-+static void __exit atmel_ac97_exit(void)
-+{
-+ platform_driver_unregister(&atmel_ac97_driver);
-+}
-+module_exit(atmel_ac97_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
---- /dev/null
-+++ b/sound/avr32/ac97c.h
-@@ -0,0 +1,71 @@
-+/*
-+ * Register definitions for the Atmel AC97 Controller.
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __SOUND_AVR32_AC97C_H
-+#define __SOUND_AVR32_AC97C_H
-+
-+#define AC97C_MR 0x08
-+#define AC97C_ICA 0x10
-+#define AC97C_OCA 0x14
-+#define AC97C_CARHR 0x20
-+#define AC97C_CATHR 0x24
-+#define AC97C_CASR 0x28
-+#define AC97C_CAMR 0x2c
-+#define AC97C_CBRHR 0x30
-+#define AC97C_CBTHR 0x34
-+#define AC97C_CBSR 0x38
-+#define AC97C_CBMR 0x3c
-+#define AC97C_CORHR 0x40
-+#define AC97C_COTHR 0x44
-+#define AC97C_COSR 0x48
-+#define AC97C_COMR 0x4c
-+#define AC97C_SR 0x50
-+#define AC97C_IER 0x54
-+#define AC97C_IDR 0x58
-+#define AC97C_IMR 0x5c
-+#define AC97C_VERSION 0xfc
-+
-+#define AC97C_CATPR PDC_TPR
-+#define AC97C_CATCR PDC_TCR
-+#define AC97C_CATNPR PDC_TNPR
-+#define AC97C_CATNCR PDC_TNCR
-+#define AC97C_CARPR PDC_RPR
-+#define AC97C_CARCR PDC_RCR
-+#define AC97C_CARNPR PDC_RNPR
-+#define AC97C_CARNCR PDC_RNCR
-+#define AC97C_PTCR PDC_PTCR
-+
-+#define AC97C_MR_ENA (1 << 0)
-+#define AC97C_MR_WRST (1 << 1)
-+#define AC97C_MR_VRA (1 << 2)
-+
-+#define AC97C_CSR_TXRDY (1 << 0)
-+#define AC97C_CSR_UNRUN (1 << 2)
-+#define AC97C_CSR_RXRDY (1 << 4)
-+#define AC97C_CSR_ENDTX (1 << 10)
-+#define AC97C_CSR_ENDRX (1 << 14)
-+
-+#define AC97C_CMR_SIZE_20 (0 << 16)
-+#define AC97C_CMR_SIZE_18 (1 << 16)
-+#define AC97C_CMR_SIZE_16 (2 << 16)
-+#define AC97C_CMR_SIZE_10 (3 << 16)
-+#define AC97C_CMR_CEM_LITTLE (1 << 18)
-+#define AC97C_CMR_CEM_BIG (0 << 18)
-+#define AC97C_CMR_CENA (1 << 21)
-+#define AC97C_CMR_PDCEN (1 << 22)
-+
-+#define AC97C_SR_CAEVT (1 << 3)
-+
-+#define AC97C_CH_ASSIGN(slot, channel) \
-+ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
-+#define AC97C_CHANNEL_NONE 0x0
-+#define AC97C_CHANNEL_A 0x1
-+#define AC97C_CHANNEL_B 0x2
-+
-+#endif /* __SOUND_AVR32_AC97C_H */
---- a/sound/oss/Kconfig
-+++ b/sound/oss/Kconfig
-@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
- int "DAC channel"
- default "1"
- depends on SOUND_SH_DAC_AUDIO
-+
-+config SOUND_AT32_ABDAC
-+ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
-+ depends on SOUND_PRIME && AVR32
---- a/sound/oss/Makefile
-+++ b/sound/oss/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_SOUND_OSS) += sound.o
-
- # Please leave it as is, cause the link order is significant !
-
-+obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
- obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
- obj-$(CONFIG_SOUND_HAL2) += hal2.o
- obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
---- /dev/null
-+++ b/sound/oss/at32_abdac.c
-@@ -0,0 +1,722 @@
-+/*
-+ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/sound.h>
-+#include <linux/soundcard.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
-+#include <linux/byteorder/swabb.h>
-+
-+#include "at32_abdac.h"
-+
-+#define DMA_BUFFER_SIZE 32768
-+#define DMA_PERIOD_SHIFT 10
-+#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
-+#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
-+
-+struct sound_settings {
-+ unsigned int format;
-+ unsigned int channels;
-+ unsigned int sample_rate;
-+ /* log2(bytes per sample) */
-+ unsigned int input_order;
-+};
-+
-+struct at32_dac {
-+ spinlock_t lock;
-+ void __iomem *regs;
-+
-+ /* head and tail refer to number of words */
-+ struct {
-+ u32 *buf;
-+ int head;
-+ int tail;
-+ } dma;
-+
-+ struct semaphore sem;
-+ wait_queue_head_t write_wait;
-+
-+ /*
-+ * Read at most ucount bytes from ubuf, translate to 2-channel
-+ * signed 16-bit big endian format and write to the DMA buffer
-+ * as long as there is room left. Return the number of bytes
-+ * successfully copied from ubuf, or -EFAULT if the first
-+ * sample from ubuf couldn't be read. This function is not
-+ * called unless there is room for at least one sample (4
-+ * bytes) in the DMA buffer.
-+ */
-+ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount);
-+
-+ struct sound_settings dsp_settings;
-+ struct dma_request_cyclic req;
-+
-+ struct clk *mck;
-+ struct clk *sample_clk;
-+ struct platform_device *pdev;
-+ int busy;
-+ int playing;
-+ int dev_dsp;
-+};
-+static struct at32_dac *the_dac;
-+
-+static inline unsigned int abdac_get_head(struct at32_dac *dac)
-+{
-+ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
-+}
-+
-+static inline unsigned int abdac_get_tail(struct at32_dac *dac)
-+{
-+ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
-+}
-+
-+static inline unsigned int abdac_dma_space(struct at32_dac *dac)
-+{
-+ unsigned int space;
-+
-+ space = ((dac->dma.tail - dac->dma.head - 1)
-+ & ((DMA_BUFFER_SIZE / 4) - 1));
-+ return space;
-+}
-+
-+static void abdac_update_dma_tail(struct at32_dac *dac)
-+{
-+ dma_addr_t dma_addr;
-+ unsigned int new_tail;
-+
-+ if (dac->playing) {
-+ dma_addr = dma_get_current_pos(dac->req.req.dmac,
-+ dac->req.req.channel);
-+ new_tail = (dma_addr - dac->req.buffer_start) / 4;
-+ if (new_tail >= dac->dma.head
-+ && (dac->dma.tail < dac->dma.head
-+ || dac->dma.tail > new_tail))
-+ dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
-+ dac->dma.tail = new_tail;
-+ dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
-+ dma_addr, dac->req.buffer_start, dac->dma.tail);
-+ }
-+}
-+
-+static int abdac_start(struct at32_dac *dac)
-+{
-+ int ret;
-+
-+ if (dac->playing)
-+ return 0;
-+
-+ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
-+
-+ clk_enable(dac->sample_clk);
-+
-+ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
-+ if (ret)
-+ goto out_stop_clock;
-+
-+ dev_dbg(&dac->pdev->dev, "starting DMA...\n");
-+ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
-+ if (ret)
-+ goto out_stop_request;
-+
-+ dac_writel(dac, CTRL, DAC_BIT(EN));
-+ dac->playing = 1;
-+
-+ return 0;
-+
-+out_stop_request:
-+ dma_stop_request(dac->req.req.dmac,
-+ dac->req.req.channel);
-+out_stop_clock:
-+ clk_disable(dac->sample_clk);
-+ return ret;
-+}
-+
-+static int abdac_stop(struct at32_dac *dac)
-+{
-+ if (dac->playing) {
-+ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
-+ dac_writel(dac, DATA, 0);
-+ dac_writel(dac, CTRL, 0);
-+ dac->playing = 0;
-+ clk_disable(dac->sample_clk);
-+ }
-+
-+ return 0;
-+}
-+
-+static int abdac_dma_prepare(struct at32_dac *dac)
-+{
-+ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
-+ &dac->req.buffer_start, GFP_KERNEL);
-+ if (!dac->dma.buf)
-+ return -ENOMEM;
-+
-+ dac->dma.head = dac->dma.tail = 0;
-+ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
-+ dac->req.buffer_size = DMA_BUFFER_SIZE;
-+
-+ return 0;
-+}
-+
-+static void abdac_dma_cleanup(struct at32_dac *dac)
-+{
-+ if (dac->dma.buf)
-+ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
-+ dac->dma.buf, dac->req.buffer_start);
-+ dac->dma.buf = NULL;
-+}
-+
-+static void abdac_dma_block_complete(struct dma_request *req)
-+{
-+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
-+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
-+
-+ wake_up(&dac->write_wait);
-+}
-+
-+static void abdac_dma_error(struct dma_request *req)
-+{
-+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
-+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
-+
-+ dev_err(&dac->pdev->dev, "DMA error\n");
-+}
-+
-+static irqreturn_t abdac_interrupt(int irq, void *dev_id)
-+{
-+ struct at32_dac *dac = dev_id;
-+ u32 status;
-+
-+ status = dac_readl(dac, INT_STATUS);
-+ if (status & DAC_BIT(UNDERRUN)) {
-+ dev_err(&dac->pdev->dev, "Underrun detected!\n");
-+ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
-+ } else {
-+ dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
-+ status);
-+ dac_writel(dac, INT_CLR, status);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount)
-+{
-+ ssize_t ret;
-+
-+ if (dac->dsp_settings.channels == 2) {
-+ const u32 __user *up = (const u32 __user *)ubuf;
-+ u32 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
-+ if (!abdac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ dac->dma.buf[abdac_get_head(dac)] = sample;
-+ dac->dma.head++;
-+ }
-+ } else {
-+ const u16 __user *up = (const u16 __user *)ubuf;
-+ u16 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
-+ if (!abdac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ dac->dma.buf[abdac_get_head(dac)]
-+ = (sample << 16) | sample;
-+ dac->dma.head++;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount)
-+{
-+ ssize_t ret;
-+
-+ if (dac->dsp_settings.channels == 2) {
-+ const u32 __user *up = (const u32 __user *)ubuf;
-+ u32 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
-+ if (!abdac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ /* Swap bytes in each halfword */
-+ dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
-+ dac->dma.head++;
-+ }
-+ } else {
-+ const u16 __user *up = (const u16 __user *)ubuf;
-+ u16 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
-+ if (!abdac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ sample = swab16(sample);
-+ dac->dma.buf[abdac_get_head(dac)]
-+ = (sample << 16) | sample;
-+ dac->dma.head++;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
-+ const char __user *buffer,
-+ size_t count)
-+{
-+ /* At least one buffer must be available at this point */
-+ dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
-+
-+ return dac->trans(dac, buffer, count);
-+}
-+
-+static int abdac_set_format(struct at32_dac *dac, int format)
-+{
-+ unsigned int order;
-+
-+ switch (format) {
-+ case AFMT_S16_BE:
-+ order = 1;
-+ dac->trans = trans_s16be;
-+ break;
-+ case AFMT_S16_LE:
-+ order = 1;
-+ dac->trans = trans_s16le;
-+ break;
-+ default:
-+ dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
-+ return -EINVAL;
-+ }
-+
-+ if (dac->dsp_settings.channels == 2)
-+ order++;
-+
-+ dac->dsp_settings.input_order = order;
-+ dac->dsp_settings.format = format;
-+ return 0;
-+}
-+
-+static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
-+{
-+ unsigned long new_rate;
-+ int ret;
-+
-+ ret = clk_set_rate(dac->sample_clk, 256 * rate);
-+ if (ret < 0)
-+ return ret;
-+
-+ /* TODO: mplayer seems to have a problem with this */
-+#if 0
-+ new_rate = clk_get_rate(dac->sample_clk);
-+ dac->dsp_settings.sample_rate = new_rate / 256;
-+#else
-+ dac->dsp_settings.sample_rate = rate;
-+#endif
-+
-+ return 0;
-+}
-+
-+static ssize_t abdac_dsp_write(struct file *file,
-+ const char __user *buffer,
-+ size_t count, loff_t *ppos)
-+{
-+ struct at32_dac *dac = file->private_data;
-+ DECLARE_WAITQUEUE(wait, current);
-+ unsigned int avail;
-+ ssize_t copied;
-+ ssize_t ret;
-+
-+ /* Avoid address space checking in the translation functions */
-+ if (!access_ok(buffer, count, VERIFY_READ))
-+ return -EFAULT;
-+
-+ down(&dac->sem);
-+
-+ if (!dac->dma.buf) {
-+ ret = abdac_dma_prepare(dac);
-+ if (ret)
-+ goto out;
-+ }
-+
-+ add_wait_queue(&dac->write_wait, &wait);
-+ ret = 0;
-+ while (count > 0) {
-+ do {
-+ abdac_update_dma_tail(dac);
-+ avail = abdac_dma_space(dac);
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ if (avail >= DMA_WRITE_THRESHOLD)
-+ break;
-+
-+ if (file->f_flags & O_NONBLOCK) {
-+ if (!ret)
-+ ret = -EAGAIN;
-+ goto out;
-+ }
-+
-+ pr_debug("Going to wait (avail = %u, count = %zu)\n",
-+ avail, count);
-+
-+ up(&dac->sem);
-+ schedule();
-+ if (signal_pending(current)) {
-+ if (!ret)
-+ ret = -ERESTARTSYS;
-+ goto out_nosem;
-+ }
-+ down(&dac->sem);
-+ } while (1);
-+
-+ copied = abdac_dma_translate_from_user(dac, buffer, count);
-+ if (copied < 0) {
-+ if (!ret)
-+ ret = -EFAULT;
-+ goto out;
-+ }
-+
-+ abdac_start(dac);
-+
-+ count -= copied;
-+ ret += copied;
-+ }
-+
-+out:
-+ up(&dac->sem);
-+out_nosem:
-+ remove_wait_queue(&dac->write_wait, &wait);
-+ set_current_state(TASK_RUNNING);
-+ return ret;
-+}
-+
-+static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ struct at32_dac *dac = file->private_data;
-+ int __user *up = (int __user *)arg;
-+ struct audio_buf_info abinfo;
-+ int val, ret;
-+
-+ switch (cmd) {
-+ case OSS_GETVERSION:
-+ return put_user(SOUND_VERSION, up);
-+
-+ case SNDCTL_DSP_SPEED:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+ if (val >= 0) {
-+ abdac_stop(dac);
-+ ret = abdac_set_sample_rate(dac, val);
-+ if (ret)
-+ return ret;
-+ }
-+ return put_user(dac->dsp_settings.sample_rate, up);
-+
-+ case SNDCTL_DSP_STEREO:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+ abdac_stop(dac);
-+ if (val && dac->dsp_settings.channels == 1)
-+ dac->dsp_settings.input_order++;
-+ else if (!val && dac->dsp_settings.channels != 1)
-+ dac->dsp_settings.input_order--;
-+ dac->dsp_settings.channels = val ? 2 : 1;
-+ return 0;
-+
-+ case SNDCTL_DSP_CHANNELS:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+
-+ if (val) {
-+ if (val < 0 || val > 2)
-+ return -EINVAL;
-+
-+ abdac_stop(dac);
-+ dac->dsp_settings.input_order
-+ += val - dac->dsp_settings.channels;
-+ dac->dsp_settings.channels = val;
-+ }
-+ return put_user(val, (int *)arg);
-+
-+ case SNDCTL_DSP_GETFMTS:
-+ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
-+
-+ case SNDCTL_DSP_SETFMT:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+
-+ if (val == AFMT_QUERY) {
-+ val = dac->dsp_settings.format;
-+ } else {
-+ ret = abdac_set_format(dac, val);
-+ if (ret)
-+ return ret;
-+ }
-+ return put_user(val, up);
-+
-+ case SNDCTL_DSP_GETOSPACE:
-+ abdac_update_dma_tail(dac);
-+ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
-+ * (DMA_PERIOD_SIZE / 4));
-+ abinfo.bytes = (abdac_dma_space(dac)
-+ << dac->dsp_settings.input_order);
-+ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
-+ >> (DMA_PERIOD_SHIFT
-+ + dac->dsp_settings.input_order));
-+ abinfo.fragments = ((abinfo.bytes
-+ >> dac->dsp_settings.input_order)
-+ / (DMA_PERIOD_SIZE / 4));
-+ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
-+ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
-+ abinfo.bytes);
-+ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
-+
-+ default:
-+ dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
-+ return -EINVAL;
-+ }
-+}
-+
-+static int abdac_dsp_open(struct inode *inode, struct file *file)
-+{
-+ struct at32_dac *dac = the_dac;
-+ int ret;
-+
-+ if (file->f_mode & FMODE_READ)
-+ return -ENXIO;
-+
-+ down(&dac->sem);
-+ ret = -EBUSY;
-+ if (dac->busy)
-+ goto out;
-+
-+ dac->dma.head = dac->dma.tail = 0;
-+
-+ /* FIXME: What are the correct defaults? */
-+ dac->dsp_settings.channels = 2;
-+ abdac_set_format(dac, AFMT_S16_BE);
-+ ret = abdac_set_sample_rate(dac, 8000);
-+ if (ret)
-+ goto out;
-+
-+ file->private_data = dac;
-+ dac->busy = 1;
-+
-+ ret = 0;
-+
-+out:
-+ up(&dac->sem);
-+ return ret;
-+}
-+
-+static int abdac_dsp_release(struct inode *inode, struct file *file)
-+{
-+ struct at32_dac *dac = file->private_data;
-+
-+ down(&dac->sem);
-+
-+ abdac_stop(dac);
-+ abdac_dma_cleanup(dac);
-+ dac->busy = 0;
-+
-+ up(&dac->sem);
-+
-+ return 0;
-+}
-+
-+static struct file_operations abdac_dsp_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = abdac_dsp_write,
-+ .ioctl = abdac_dsp_ioctl,
-+ .open = abdac_dsp_open,
-+ .release = abdac_dsp_release,
-+};
-+
-+static int __init abdac_probe(struct platform_device *pdev)
-+{
-+ struct at32_dac *dac;
-+ struct resource *regs;
-+ struct clk *mck;
-+ struct clk *sample_clk;
-+ int irq;
-+ int ret;
-+
-+ if (the_dac)
-+ return -EBUSY;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ mck = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(mck))
-+ return PTR_ERR(mck);
-+ sample_clk = clk_get(&pdev->dev, "sample_clk");
-+ if (IS_ERR(sample_clk)) {
-+ ret = PTR_ERR(sample_clk);
-+ goto out_put_mck;
-+ }
-+ clk_enable(mck);
-+
-+ ret = -ENOMEM;
-+ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
-+ if (!dac)
-+ goto out_disable_clk;
-+
-+ spin_lock_init(&dac->lock);
-+ init_MUTEX(&dac->sem);
-+ init_waitqueue_head(&dac->write_wait);
-+ dac->pdev = pdev;
-+ dac->mck = mck;
-+ dac->sample_clk = sample_clk;
-+
-+ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dac->regs)
-+ goto out_free_dac;
-+
-+ ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
-+ if (ret)
-+ goto out_unmap_regs;
-+
-+ /* FIXME */
-+ dac->req.req.dmac = find_dma_controller(0);
-+ if (!dac->req.req.dmac)
-+ goto out_free_irq;
-+
-+ ret = dma_alloc_channel(dac->req.req.dmac);
-+ if (ret < 0)
-+ goto out_free_irq;
-+
-+ dac->req.req.channel = ret;
-+ dac->req.req.block_complete = abdac_dma_block_complete;
-+ dac->req.req.error = abdac_dma_error;
-+ dac->req.data_reg = regs->start + DAC_DATA;
-+ dac->req.periph_id = 2; /* FIXME */
-+ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
-+ dac->req.width = DMA_WIDTH_32BIT;
-+
-+ /* Make sure the DAC is silent and disabled */
-+ dac_writel(dac, DATA, 0);
-+ dac_writel(dac, CTRL, 0);
-+
-+ ret = register_sound_dsp(&abdac_dsp_fops, -1);
-+ if (ret < 0)
-+ goto out_free_dma;
-+ dac->dev_dsp = ret;
-+
-+ /* TODO: Register mixer */
-+
-+ the_dac = dac;
-+ platform_set_drvdata(pdev, dac);
-+
-+ return 0;
-+
-+out_free_dma:
-+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
-+out_free_irq:
-+ free_irq(irq, dac);
-+out_unmap_regs:
-+ iounmap(dac->regs);
-+out_free_dac:
-+ kfree(dac);
-+out_disable_clk:
-+ clk_disable(mck);
-+ clk_put(sample_clk);
-+out_put_mck:
-+ clk_put(mck);
-+ return ret;
-+}
-+
-+static int __exit abdac_remove(struct platform_device *pdev)
-+{
-+ struct at32_dac *dac;
-+
-+ dac = platform_get_drvdata(pdev);
-+ if (dac) {
-+ unregister_sound_dsp(dac->dev_dsp);
-+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
-+ free_irq(platform_get_irq(pdev, 0), dac);
-+ iounmap(dac->regs);
-+ clk_disable(dac->mck);
-+ clk_put(dac->sample_clk);
-+ clk_put(dac->mck);
-+ kfree(dac);
-+ platform_set_drvdata(pdev, NULL);
-+ the_dac = NULL;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver abdac_driver = {
-+ .remove = __exit_p(abdac_remove),
-+ .driver = {
-+ .name = "abdac",
-+ },
-+};
-+
-+static int __init abdac_init(void)
-+{
-+ return platform_driver_probe(&abdac_driver, abdac_probe);
-+}
-+module_init(abdac_init);
-+
-+static void __exit abdac_exit(void)
-+{
-+ platform_driver_unregister(&abdac_driver);
-+}
-+module_exit(abdac_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/oss/at32_abdac.h
-@@ -0,0 +1,59 @@
-+/*
-+ * Register definitions for the Atmel AT32 on-chip DAC.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __SOUND_OSS_AT32_ABDAC_H__
-+#define __SOUND_OSS_AT32_ABDAC_H__
-+
-+/* DAC register offsets */
-+#define DAC_DATA 0x0000
-+#define DAC_CTRL 0x0008
-+#define DAC_INT_MASK 0x000c
-+#define DAC_INT_EN 0x0010
-+#define DAC_INT_DIS 0x0014
-+#define DAC_INT_CLR 0x0018
-+#define DAC_INT_STATUS 0x001c
-+#define DAC_PDC_DATA 0x0020
-+
-+/* Bitfields in CTRL */
-+#define DAC_SWAP_OFFSET 30
-+#define DAC_SWAP_SIZE 1
-+#define DAC_EN_OFFSET 31
-+#define DAC_EN_SIZE 1
-+
-+/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
-+#define DAC_UNDERRUN_OFFSET 28
-+#define DAC_UNDERRUN_SIZE 1
-+#define DAC_TX_READY_OFFSET 29
-+#define DAC_TX_READY_SIZE 1
-+#define DAC_TX_BUFFER_EMPTY_OFFSET 30
-+#define DAC_TX_BUFFER_EMPTY_SIZE 1
-+#define DAC_CHANNEL_TX_END_OFFSET 31
-+#define DAC_CHANNEL_TX_END_SIZE 1
-+
-+/* Bit manipulation macros */
-+#define DAC_BIT(name) \
-+ (1 << DAC_##name##_OFFSET)
-+#define DAC_BF(name, value) \
-+ (((value) & ((1 << DAC_##name##_SIZE) - 1)) \
-+ << DAC_##name##_OFFSET)
-+#define DAC_BFEXT(name, value) \
-+ (((value) >> DAC_##name##_OFFSET) \
-+ & ((1 << DAC_##name##_SIZE) - 1))
-+#define DAC_BFINS(name, value, old) \
-+ (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
-+ << DAC_##name##_OFFSET)) \
-+ | DAC_BF(name,value))
-+
-+/* Register access macros */
-+#define dac_readl(port, reg) \
-+ __raw_readl((port)->regs + DAC_##reg)
-+#define dac_writel(port, reg, value) \
-+ __raw_writel((value), (port)->regs + DAC_##reg)
-+
-+#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
---- a/sound/spi/at73c213.c
-+++ b/sound/spi/at73c213.c
-@@ -737,7 +737,7 @@ cleanup:
- /*
- * Device functions
- */
--static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
-+static int __devinit snd_at73c213_ssc_init(struct snd_at73c213 *chip)
- {
- /*
- * Continuous clock output.
-@@ -767,7 +767,7 @@ static int snd_at73c213_ssc_init(struct
- return 0;
- }
-
--static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
-+static int __devinit snd_at73c213_chip_init(struct snd_at73c213 *chip)
- {
- int retval;
- unsigned char dac_ctrl = 0;
-@@ -933,7 +933,7 @@ out:
- return retval;
- }
-
--static int snd_at73c213_probe(struct spi_device *spi)
-+static int __devinit snd_at73c213_probe(struct spi_device *spi)
- {
- struct snd_card *card;
- struct snd_at73c213 *chip;