1 files changed, 0 insertions, 73 deletions
diff --git a/target/linux/bcm27xx/patches-5.10/950-0725-overlays-Add-Ablic-S35390A-to-i2c-rtc-and-gpio.patch b/target/linux/bcm27xx/patches-5.10/950-0725-overlays-Add-Ablic-S35390A-to-i2c-rtc-and-gpio.patch
deleted file mode 100644
index 5f7c6f16a3..0000000000
--- a/target/linux/bcm27xx/patches-5.10/950-0725-overlays-Add-Ablic-S35390A-to-i2c-rtc-and-gpio.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 886c341229589e7d46cbdb8194c23faee0e2a6f9 Mon Sep 17 00:00:00 2001
-From: WoodenNautilus <86767647+WoodenNautilus@users.noreply.github.com>
-Date: Tue, 3 Aug 2021 11:13:06 +0200
-Subject: [PATCH] overlays: Add Ablic S35390A to i2c-rtc and -gpio
-
-See: https://github.com/raspberrypi/linux/pull/4492
-
-Signed-off-by: Maxime Torrelli <maxime.torrelli@gmail.com>
----
- arch/arm/boot/dts/overlays/README              |  4 ++++
- arch/arm/boot/dts/overlays/i2c-rtc-common.dtsi | 17 ++++++++++++++++-
- 2 files changed, 20 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1424,6 +1424,8 @@ Params: abx80x                  Select o
- 
-         sd3078                  Select the ZXW Shenzhen whwave SD3078 device
- 
-+        s35390a                 Select the ABLIC S35390A device
-+
-         i2c0                    Choose the I2C0 bus on GPIOs 0&1
- 
-         i2c_csi_dsi             Choose the I2C0 bus on GPIOs 44&45
-@@ -1487,6 +1489,8 @@ Params: abx80x                  Select o
- 
-         sd3078                  Select the ZXW Shenzhen whwave SD3078 device
- 
-+        s35390a                 Select the ABLIC S35390A device
-+
-         addr                    Sets the address for the RTC. Note that the
-                                 device must be configured to use the specified
-                                 address.
---- a/arch/arm/boot/dts/overlays/i2c-rtc-common.dtsi
-+++ b/arch/arm/boot/dts/overlays/i2c-rtc-common.dtsi
-@@ -243,6 +243,19 @@
- 		};
- 	};
- 
-+	fragment@18 {
-+		target = <&i2cbus>;
-+		__dormant__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			s35390a: s35390a@30 {
-+				compatible = "ablic,s35390a";
-+				reg = <0x30>;
-+			};
-+		};
-+	};
-+
- 	__overrides__ {
- 		abx80x = <0>,"+0";
- 		ds1307 = <0>,"+1";
-@@ -262,6 +275,7 @@
- 		sd3078 = <0>,"+14";
- 		pcf85063 = <0>,"+15";
- 		pcf85063a = <0>,"+16";
-+		s35390a = <0>,"+18";
- 
- 		addr = <&abx80x>, "reg:0",
- 		       <&ds1307>, "reg:0",
-@@ -272,7 +286,8 @@
- 		       <&pcf8523>, "reg:0",
- 		       <&pcf8563>, "reg:0",
- 		       <&m41t62>, "reg:0",
--		       <&rv1805>, "reg:0";
-+		       <&rv1805>, "reg:0",
-+		       <&s35390a>, "reg:0";
- 		trickle-diode-type = <&abx80x>,"abracon,tc-diode",
- 				     <&rv1805>,"abracon,tc-diode";
- 		trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0",