aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0440-x86-PCI-sta2x11-use-default-DMA-address-translation.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0440-x86-PCI-sta2x11-use-default-DMA-address-translation.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0440-x86-PCI-sta2x11-use-default-DMA-address-translation.patch259
1 files changed, 0 insertions, 259 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0440-x86-PCI-sta2x11-use-default-DMA-address-translation.patch b/target/linux/bcm27xx/patches-5.4/950-0440-x86-PCI-sta2x11-use-default-DMA-address-translation.patch
deleted file mode 100644
index 539f5e1c0b..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0440-x86-PCI-sta2x11-use-default-DMA-address-translation.patch
+++ /dev/null
@@ -1,259 +0,0 @@
-From 97a48106d1698038720495fdd49c491b283bf110 Mon Sep 17 00:00:00 2001
-From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Date: Thu, 7 Nov 2019 16:06:45 +0100
-Subject: [PATCH] x86/PCI: sta2x11: use default DMA address translation
-
-commit e380a0394c36a3a878c858418d5dd7f5f195b6fc upstream.
-
-The devices found behind this PCIe chip have unusual DMA mapping
-constraints as there is an AMBA interconnect placed in between them and
-the different PCI endpoints. The offset between physical memory
-addresses and AMBA's view is provided by reading a PCI config register,
-which is saved and used whenever DMA mapping is needed.
-
-It turns out that this DMA setup can be represented by properly setting
-'dma_pfn_offset', 'dma_bus_mask' and 'dma_mask' during the PCI device
-enable fixup. And ultimately allows us to get rid of this device's
-custom DMA functions.
-
-Aside from the code deletion and DMA setup, sta2x11_pdev_to_mapping() is
-moved to avoid warnings whenever CONFIG_PM is not enabled.
-
-Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Signed-off-by: Christoph Hellwig <hch@lst.de>
----
- arch/x86/Kconfig | 1 -
- arch/x86/include/asm/device.h | 3 -
- arch/x86/include/asm/dma-direct.h | 9 --
- arch/x86/pci/sta2x11-fixup.c | 135 ++++++------------------------
- 4 files changed, 26 insertions(+), 122 deletions(-)
- delete mode 100644 arch/x86/include/asm/dma-direct.h
-
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -709,7 +709,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
- config STA2X11
- bool "STA2X11 Companion Chip Support"
- depends on X86_32_NON_STANDARD && PCI
-- select ARCH_HAS_PHYS_TO_DMA
- select SWIOTLB
- select MFD_STA2X11
- select GPIOLIB
---- a/arch/x86/include/asm/device.h
-+++ b/arch/x86/include/asm/device.h
-@@ -6,9 +6,6 @@ struct dev_archdata {
- #if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU)
- void *iommu; /* hook for IOMMU specific extension */
- #endif
--#ifdef CONFIG_STA2X11
-- bool is_sta2x11;
--#endif
- };
-
- #if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
---- a/arch/x86/include/asm/dma-direct.h
-+++ /dev/null
-@@ -1,9 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--#ifndef ASM_X86_DMA_DIRECT_H
--#define ASM_X86_DMA_DIRECT_H 1
--
--bool dma_capable(struct device *dev, dma_addr_t addr, size_t size);
--dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
--phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
--
--#endif /* ASM_X86_DMA_DIRECT_H */
---- a/arch/x86/pci/sta2x11-fixup.c
-+++ b/arch/x86/pci/sta2x11-fixup.c
-@@ -30,7 +30,6 @@ struct sta2x11_ahb_regs { /* saved durin
- };
-
- struct sta2x11_mapping {
-- u32 amba_base;
- int is_suspended;
- struct sta2x11_ahb_regs regs[STA2X11_NR_FUNCS];
- };
-@@ -92,18 +91,6 @@ static int sta2x11_pdev_to_ep(struct pci
- return pdev->bus->number - instance->bus0;
- }
-
--static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev)
--{
-- struct sta2x11_instance *instance;
-- int ep;
--
-- instance = sta2x11_pdev_to_instance(pdev);
-- if (!instance)
-- return NULL;
-- ep = sta2x11_pdev_to_ep(pdev);
-- return instance->map + ep;
--}
--
- /* This is exported, as some devices need to access the MFD registers */
- struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev)
- {
-@@ -111,39 +98,6 @@ struct sta2x11_instance *sta2x11_get_ins
- }
- EXPORT_SYMBOL(sta2x11_get_instance);
-
--
--/**
-- * p2a - Translate physical address to STA2x11 AMBA address,
-- * used for DMA transfers to STA2x11
-- * @p: Physical address
-- * @pdev: PCI device (must be hosted within the connext)
-- */
--static dma_addr_t p2a(dma_addr_t p, struct pci_dev *pdev)
--{
-- struct sta2x11_mapping *map;
-- dma_addr_t a;
--
-- map = sta2x11_pdev_to_mapping(pdev);
-- a = p + map->amba_base;
-- return a;
--}
--
--/**
-- * a2p - Translate STA2x11 AMBA address to physical address
-- * used for DMA transfers from STA2x11
-- * @a: STA2x11 AMBA address
-- * @pdev: PCI device (must be hosted within the connext)
-- */
--static dma_addr_t a2p(dma_addr_t a, struct pci_dev *pdev)
--{
-- struct sta2x11_mapping *map;
-- dma_addr_t p;
--
-- map = sta2x11_pdev_to_mapping(pdev);
-- p = a - map->amba_base;
-- return p;
--}
--
- /* At setup time, we use our own ops if the device is a ConneXt one */
- static void sta2x11_setup_pdev(struct pci_dev *pdev)
- {
-@@ -151,9 +105,6 @@ static void sta2x11_setup_pdev(struct pc
-
- if (!instance) /* either a sta2x11 bridge or another ST device */
- return;
-- pci_set_consistent_dma_mask(pdev, STA2X11_AMBA_SIZE - 1);
-- pci_set_dma_mask(pdev, STA2X11_AMBA_SIZE - 1);
-- pdev->dev.archdata.is_sta2x11 = true;
-
- /* We must enable all devices as master, for audio DMA to work */
- pci_set_master(pdev);
-@@ -161,61 +112,6 @@ static void sta2x11_setup_pdev(struct pc
- DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_setup_pdev);
-
- /*
-- * The following three functions are exported (used in swiotlb: FIXME)
-- */
--/**
-- * dma_capable - Check if device can manage DMA transfers (FIXME: kill it)
-- * @dev: device for a PCI device
-- * @addr: DMA address
-- * @size: DMA size
-- */
--bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
--{
-- struct sta2x11_mapping *map;
--
-- if (!dev->archdata.is_sta2x11) {
-- if (!dev->dma_mask)
-- return false;
-- return addr + size - 1 <= *dev->dma_mask;
-- }
--
-- map = sta2x11_pdev_to_mapping(to_pci_dev(dev));
--
-- if (!map || (addr < map->amba_base))
-- return false;
-- if (addr + size >= map->amba_base + STA2X11_AMBA_SIZE) {
-- return false;
-- }
--
-- return true;
--}
--
--/**
-- * __phys_to_dma - Return the DMA AMBA address used for this STA2x11 device
-- * @dev: device for a PCI device
-- * @paddr: Physical address
-- */
--dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
--{
-- if (!dev->archdata.is_sta2x11)
-- return paddr;
-- return p2a(paddr, to_pci_dev(dev));
--}
--
--/**
-- * dma_to_phys - Return the physical address used for this STA2x11 DMA address
-- * @dev: device for a PCI device
-- * @daddr: STA2x11 AMBA DMA address
-- */
--phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
--{
-- if (!dev->archdata.is_sta2x11)
-- return daddr;
-- return a2p(daddr, to_pci_dev(dev));
--}
--
--
--/*
- * At boot we must set up the mappings for the pcie-to-amba bridge.
- * It involves device access, and the same happens at suspend/resume time
- */
-@@ -234,12 +130,22 @@ phys_addr_t __dma_to_phys(struct device
- /* At probe time, enable mapping for each endpoint, using the pdev */
- static void sta2x11_map_ep(struct pci_dev *pdev)
- {
-- struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
-+ struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev);
-+ struct device *dev = &pdev->dev;
-+ u32 amba_base, max_amba_addr;
- int i;
-
-- if (!map)
-+ if (!instance)
- return;
-- pci_read_config_dword(pdev, AHB_BASE(0), &map->amba_base);
-+
-+ pci_read_config_dword(pdev, AHB_BASE(0), &amba_base);
-+ max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1;
-+
-+ dev->dma_pfn_offset = PFN_DOWN(-amba_base);
-+
-+ dev->bus_dma_mask = max_amba_addr;
-+ pci_set_consistent_dma_mask(pdev, max_amba_addr);
-+ pci_set_dma_mask(pdev, max_amba_addr);
-
- /* Configure AHB mapping */
- pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0);
-@@ -253,13 +159,24 @@ static void sta2x11_map_ep(struct pci_de
-
- dev_info(&pdev->dev,
- "sta2x11: Map EP %i: AMBA address %#8x-%#8x\n",
-- sta2x11_pdev_to_ep(pdev), map->amba_base,
-- map->amba_base + STA2X11_AMBA_SIZE - 1);
-+ sta2x11_pdev_to_ep(pdev), amba_base, max_amba_addr);
- }
- DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_map_ep);
-
- #ifdef CONFIG_PM /* Some register values must be saved and restored */
-
-+static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev)
-+{
-+ struct sta2x11_instance *instance;
-+ int ep;
-+
-+ instance = sta2x11_pdev_to_instance(pdev);
-+ if (!instance)
-+ return NULL;
-+ ep = sta2x11_pdev_to_ep(pdev);
-+ return instance->map + ep;
-+}
-+
- static void suspend_mapping(struct pci_dev *pdev)
- {
- struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-16 06:18:54 +0000