aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0459-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0459-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0459-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch810
1 files changed, 810 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0459-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch b/target/linux/bcm27xx/patches-5.4/950-0459-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch
new file mode 100644
index 0000000000..ca97a1966e
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0459-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch
@@ -0,0 +1,810 @@
+From 4d9470c29736bf81bdb0d21da24cf350b1e99402 Mon Sep 17 00:00:00 2001
+From: Jim Quinlan <james.quinlan@broadcom.com>
+Date: Mon, 16 Dec 2019 12:01:09 +0100
+Subject: [PATCH] PCI: brcmstb: Add Broadcom STB PCIe host controller
+ driver
+
+commit c0452137034bda8f686dd9a2e167949bfffd6776 upstream.
+
+This adds a basic driver for Broadcom's STB PCIe controller, for now
+aimed at Raspberry Pi 4's SoC, bcm2711.
+
+Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
+Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+[lorenzo.pieralisi@arm.com: updated brcm_pcie_get_rc_bar2_size_and_offset()according to https://lore.kernel.org/linux-pci/be8ddb33a7360af1815cf686f77f3f0913d02be3.camel@suse.de]
+Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Reviewed-by: Andrew Murray <andrew.murray@arm.com>
+Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
+---
+ drivers/pci/controller/Kconfig | 8 +
+ drivers/pci/controller/Makefile | 1 +
+ drivers/pci/controller/pcie-brcmstb.c | 755 ++++++++++++++++++++++++++
+ 3 files changed, 764 insertions(+)
+ create mode 100644 drivers/pci/controller/pcie-brcmstb.c
+
+--- a/drivers/pci/controller/Kconfig
++++ b/drivers/pci/controller/Kconfig
+@@ -281,6 +281,14 @@ config VMD
+ To compile this driver as a module, choose M here: the
+ module will be called vmd.
+
++config PCIE_BRCMSTB
++ tristate "Broadcom Brcmstb PCIe host controller"
++ depends on ARCH_BCM2835 || COMPILE_TEST
++ depends on OF
++ help
++ Say Y here to enable PCIe host controller support for
++ Broadcom STB based SoCs, like the Raspberry Pi 4.
++
+ config PCI_HYPERV_INTERFACE
+ tristate "Hyper-V PCI Interface"
+ depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
+--- a/drivers/pci/controller/Makefile
++++ b/drivers/pci/controller/Makefile
+@@ -30,6 +30,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-medi
+ obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
+ obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
+ obj-$(CONFIG_VMD) += vmd.o
++obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
+ # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
+ obj-y += dwc/
+
+--- /dev/null
++++ b/drivers/pci/controller/pcie-brcmstb.c
+@@ -0,0 +1,755 @@
++// SPDX-License-Identifier: GPL-2.0+
++/* Copyright (C) 2009 - 2019 Broadcom */
++
++#include <linux/bitfield.h>
++#include <linux/clk.h>
++#include <linux/compiler.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/irqdomain.h>
++#include <linux/kernel.h>
++#include <linux/list.h>
++#include <linux/log2.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++#include <linux/of_platform.h>
++#include <linux/pci.h>
++#include <linux/printk.h>
++#include <linux/sizes.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include "../pci.h"
++
++/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
++#define BRCM_PCIE_CAP_REGS 0x00ac
++
++/* Broadcom STB PCIe Register Offsets */
++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188
++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc
++#define PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN 0x0
++
++#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c
++#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff
++
++#define PCIE_RC_DL_MDIO_ADDR 0x1100
++#define PCIE_RC_DL_MDIO_WR_DATA 0x1104
++#define PCIE_RC_DL_MDIO_RD_DATA 0x1108
++
++#define PCIE_MISC_MISC_CTRL 0x4008
++#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000
++#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000
++#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000
++#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128 0x0
++#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000
++
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c
++#define PCIE_MEM_WIN0_LO(win) \
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 4)
++
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010
++#define PCIE_MEM_WIN0_HI(win) \
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 4)
++
++#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c
++#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f
++
++#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034
++#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f
++#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038
++
++#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c
++#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f
++
++#define PCIE_MISC_PCIE_CTRL 0x4064
++#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1
++
++#define PCIE_MISC_PCIE_STATUS 0x4068
++#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80
++#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20
++#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10
++#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40
++
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0
++#define PCIE_MEM_WIN0_BASE_LIMIT(win) \
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4)
++
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff
++#define PCIE_MEM_WIN0_BASE_HI(win) \
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8)
++
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff
++#define PCIE_MEM_WIN0_LIMIT_HI(win) \
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
++
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
++
++#define PCIE_MSI_INTR2_STATUS 0x4500
++#define PCIE_MSI_INTR2_CLR 0x4508
++#define PCIE_MSI_INTR2_MASK_SET 0x4510
++#define PCIE_MSI_INTR2_MASK_CLR 0x4514
++
++#define PCIE_EXT_CFG_DATA 0x8000
++
++#define PCIE_EXT_CFG_INDEX 0x9000
++#define PCIE_EXT_BUSNUM_SHIFT 20
++#define PCIE_EXT_SLOT_SHIFT 15
++#define PCIE_EXT_FUNC_SHIFT 12
++
++#define PCIE_RGR1_SW_INIT_1 0x9210
++#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1
++#define PCIE_RGR1_SW_INIT_1_INIT_MASK 0x2
++
++/* PCIe parameters */
++#define BRCM_NUM_PCIE_OUT_WINS 0x4
++
++/* MDIO registers */
++#define MDIO_PORT0 0x0
++#define MDIO_DATA_MASK 0x7fffffff
++#define MDIO_PORT_MASK 0xf0000
++#define MDIO_REGAD_MASK 0xffff
++#define MDIO_CMD_MASK 0xfff00000
++#define MDIO_CMD_READ 0x1
++#define MDIO_CMD_WRITE 0x0
++#define MDIO_DATA_DONE_MASK 0x80000000
++#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0)
++#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1)
++#define SSC_REGS_ADDR 0x1100
++#define SET_ADDR_OFFSET 0x1f
++#define SSC_CNTL_OFFSET 0x2
++#define SSC_CNTL_OVRD_EN_MASK 0x8000
++#define SSC_CNTL_OVRD_VAL_MASK 0x4000
++#define SSC_STATUS_OFFSET 0x1
++#define SSC_STATUS_SSC_MASK 0x400
++#define SSC_STATUS_PLL_LOCK_MASK 0x800
++
++/* Internal PCIe Host Controller Information.*/
++struct brcm_pcie {
++ struct device *dev;
++ void __iomem *base;
++ struct clk *clk;
++ struct pci_bus *root_bus;
++ struct device_node *np;
++ bool ssc;
++ int gen;
++};
++
++/*
++ * This is to convert the size of the inbound "BAR" region to the
++ * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE
++ */
++static int brcm_pcie_encode_ibar_size(u64 size)
++{
++ int log2_in = ilog2(size);
++
++ if (log2_in >= 12 && log2_in <= 15)
++ /* Covers 4KB to 32KB (inclusive) */
++ return (log2_in - 12) + 0x1c;
++ else if (log2_in >= 16 && log2_in <= 35)
++ /* Covers 64KB to 32GB, (inclusive) */
++ return log2_in - 15;
++ /* Something is awry so disable */
++ return 0;
++}
++
++static u32 brcm_pcie_mdio_form_pkt(int port, int regad, int cmd)
++{
++ u32 pkt = 0;
++
++ pkt |= FIELD_PREP(MDIO_PORT_MASK, port);
++ pkt |= FIELD_PREP(MDIO_REGAD_MASK, regad);
++ pkt |= FIELD_PREP(MDIO_CMD_MASK, cmd);
++
++ return pkt;
++}
++
++/* negative return value indicates error */
++static int brcm_pcie_mdio_read(void __iomem *base, u8 port, u8 regad, u32 *val)
++{
++ int tries;
++ u32 data;
++
++ writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_READ),
++ base + PCIE_RC_DL_MDIO_ADDR);
++ readl(base + PCIE_RC_DL_MDIO_ADDR);
++
++ data = readl(base + PCIE_RC_DL_MDIO_RD_DATA);
++ for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) {
++ udelay(10);
++ data = readl(base + PCIE_RC_DL_MDIO_RD_DATA);
++ }
++
++ *val = FIELD_GET(MDIO_DATA_MASK, data);
++ return MDIO_RD_DONE(data) ? 0 : -EIO;
++}
++
++/* negative return value indicates error */
++static int brcm_pcie_mdio_write(void __iomem *base, u8 port,
++ u8 regad, u16 wrdata)
++{
++ int tries;
++ u32 data;
++
++ writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_WRITE),
++ base + PCIE_RC_DL_MDIO_ADDR);
++ readl(base + PCIE_RC_DL_MDIO_ADDR);
++ writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA);
++
++ data = readl(base + PCIE_RC_DL_MDIO_WR_DATA);
++ for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) {
++ udelay(10);
++ data = readl(base + PCIE_RC_DL_MDIO_WR_DATA);
++ }
++
++ return MDIO_WT_DONE(data) ? 0 : -EIO;
++}
++
++/*
++ * Configures device for Spread Spectrum Clocking (SSC) mode; a negative
++ * return value indicates error.
++ */
++static int brcm_pcie_set_ssc(struct brcm_pcie *pcie)
++{
++ int pll, ssc;
++ int ret;
++ u32 tmp;
++
++ ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, SET_ADDR_OFFSET,
++ SSC_REGS_ADDR);
++ if (ret < 0)
++ return ret;
++
++ ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0,
++ SSC_CNTL_OFFSET, &tmp);
++ if (ret < 0)
++ return ret;
++
++ u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_EN_MASK);
++ u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_VAL_MASK);
++ ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0,
++ SSC_CNTL_OFFSET, tmp);
++ if (ret < 0)
++ return ret;
++
++ usleep_range(1000, 2000);
++ ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0,
++ SSC_STATUS_OFFSET, &tmp);
++ if (ret < 0)
++ return ret;
++
++ ssc = FIELD_GET(SSC_STATUS_SSC_MASK, tmp);
++ pll = FIELD_GET(SSC_STATUS_PLL_LOCK_MASK, tmp);
++
++ return ssc && pll ? 0 : -EIO;
++}
++
++/* Limits operation to a specific generation (1, 2, or 3) */
++static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen)
++{
++ u16 lnkctl2 = readw(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
++ u32 lnkcap = readl(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
++
++ lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen;
++ writel(lnkcap, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
++
++ lnkctl2 = (lnkctl2 & ~0xf) | gen;
++ writew(lnkctl2, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
++}
++
++static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
++ unsigned int win, u64 cpu_addr,
++ u64 pcie_addr, u64 size)
++{
++ u32 cpu_addr_mb_high, limit_addr_mb_high;
++ phys_addr_t cpu_addr_mb, limit_addr_mb;
++ int high_addr_shift;
++ u32 tmp;
++
++ /* Set the base of the pcie_addr window */
++ writel(lower_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_LO(win));
++ writel(upper_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_HI(win));
++
++ /* Write the addr base & limit lower bits (in MBs) */
++ cpu_addr_mb = cpu_addr / SZ_1M;
++ limit_addr_mb = (cpu_addr + size - 1) / SZ_1M;
++
++ tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win));
++ u32p_replace_bits(&tmp, cpu_addr_mb,
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK);
++ u32p_replace_bits(&tmp, limit_addr_mb,
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK);
++ writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win));
++
++ /* Write the cpu & limit addr upper bits */
++ high_addr_shift =
++ HWEIGHT32(PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK);
++
++ cpu_addr_mb_high = cpu_addr_mb >> high_addr_shift;
++ tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_HI(win));
++ u32p_replace_bits(&tmp, cpu_addr_mb_high,
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK);
++ writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_HI(win));
++
++ limit_addr_mb_high = limit_addr_mb >> high_addr_shift;
++ tmp = readl(pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win));
++ u32p_replace_bits(&tmp, limit_addr_mb_high,
++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK);
++ writel(tmp, pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win));
++}
++
++/* The controller is capable of serving in both RC and EP roles */
++static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie)
++{
++ void __iomem *base = pcie->base;
++ u32 val = readl(base + PCIE_MISC_PCIE_STATUS);
++
++ return !!FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK, val);
++}
++
++static bool brcm_pcie_link_up(struct brcm_pcie *pcie)
++{
++ u32 val = readl(pcie->base + PCIE_MISC_PCIE_STATUS);
++ u32 dla = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK, val);
++ u32 plu = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK, val);
++
++ return dla && plu;
++}
++
++/* Configuration space read/write support */
++static inline int brcm_pcie_cfg_index(int busnr, int devfn, int reg)
++{
++ return ((PCI_SLOT(devfn) & 0x1f) << PCIE_EXT_SLOT_SHIFT)
++ | ((PCI_FUNC(devfn) & 0x07) << PCIE_EXT_FUNC_SHIFT)
++ | (busnr << PCIE_EXT_BUSNUM_SHIFT)
++ | (reg & ~3);
++}
++
++static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
++ int where)
++{
++ struct brcm_pcie *pcie = bus->sysdata;
++ void __iomem *base = pcie->base;
++ int idx;
++
++ /* Accesses to the RC go right to the RC registers if slot==0 */
++ if (pci_is_root_bus(bus))
++ return PCI_SLOT(devfn) ? NULL : base + where;
++
++ /* For devices, write to the config space index register */
++ idx = brcm_pcie_cfg_index(bus->number, devfn, 0);
++ writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
++ return base + PCIE_EXT_CFG_DATA + where;
++}
++
++static struct pci_ops brcm_pcie_ops = {
++ .map_bus = brcm_pcie_map_conf,
++ .read = pci_generic_config_read,
++ .write = pci_generic_config_write,
++};
++
++static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, u32 val)
++{
++ u32 tmp;
++
++ tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1);
++ u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_INIT_MASK);
++ writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1);
++}
++
++static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val)
++{
++ u32 tmp;
++
++ tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1);
++ u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
++ writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1);
++}
++
++static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
++ u64 *rc_bar2_size,
++ u64 *rc_bar2_offset)
++{
++ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
++ struct device *dev = pcie->dev;
++ struct resource_entry *entry;
++
++ entry = resource_list_first_type(&bridge->dma_ranges, IORESOURCE_MEM);
++ if (!entry)
++ return -ENODEV;
++
++
++ /*
++ * The controller expects the inbound window offset to be calculated as
++ * the difference between PCIe's address space and CPU's. The offset
++ * provided by the firmware is calculated the opposite way, so we
++ * negate it.
++ */
++ *rc_bar2_offset = -entry->offset;
++ *rc_bar2_size = 1ULL << fls64(entry->res->end - entry->res->start);
++
++ /*
++ * We validate the inbound memory view even though we should trust
++ * whatever the device-tree provides. This is because of an HW issue on
++ * early Raspberry Pi 4's revisions (bcm2711). It turns out its
++ * firmware has to dynamically edit dma-ranges due to a bug on the
++ * PCIe controller integration, which prohibits any access above the
++ * lower 3GB of memory. Given this, we decided to keep the dma-ranges
++ * in check, avoiding hard to debug device-tree related issues in the
++ * future:
++ *
++ * The PCIe host controller by design must set the inbound viewport to
++ * be a contiguous arrangement of all of the system's memory. In
++ * addition, its size mut be a power of two. To further complicate
++ * matters, the viewport must start on a pcie-address that is aligned
++ * on a multiple of its size. If a portion of the viewport does not
++ * represent system memory -- e.g. 3GB of memory requires a 4GB
++ * viewport -- we can map the outbound memory in or after 3GB and even
++ * though the viewport will overlap the outbound memory the controller
++ * will know to send outbound memory downstream and everything else
++ * upstream.
++ *
++ * For example:
++ *
++ * - The best-case scenario, memory up to 3GB, is to place the inbound
++ * region in the first 4GB of pcie-space, as some legacy devices can
++ * only address 32bits. We would also like to put the MSI under 4GB
++ * as well, since some devices require a 32bit MSI target address.
++ *
++ * - If the system memory is 4GB or larger we cannot start the inbound
++ * region at location 0 (since we have to allow some space for
++ * outbound memory @ 3GB). So instead it will start at the 1x
++ * multiple of its size
++ */
++ if (!*rc_bar2_size || *rc_bar2_offset % *rc_bar2_size ||
++ (*rc_bar2_offset < SZ_4G && *rc_bar2_offset > SZ_2G)) {
++ dev_err(dev, "Invalid rc_bar2_offset/size: size 0x%llx, off 0x%llx\n",
++ *rc_bar2_size, *rc_bar2_offset);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static int brcm_pcie_setup(struct brcm_pcie *pcie)
++{
++ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
++ u64 rc_bar2_offset, rc_bar2_size;
++ void __iomem *base = pcie->base;
++ struct device *dev = pcie->dev;
++ struct resource_entry *entry;
++ unsigned int scb_size_val;
++ bool ssc_good = false;
++ struct resource *res;
++ int num_out_wins = 0;
++ u16 nlw, cls, lnksta;
++ int i, ret;
++ u32 tmp;
++
++ /* Reset the bridge */
++ brcm_pcie_bridge_sw_init_set(pcie, 1);
++
++ usleep_range(100, 200);
++
++ /* Take the bridge out of reset */
++ brcm_pcie_bridge_sw_init_set(pcie, 0);
++
++ tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
++ tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
++ writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
++ /* Wait for SerDes to be stable */
++ usleep_range(100, 200);
++
++ /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
++ u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK);
++ u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK);
++ u32p_replace_bits(&tmp, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128,
++ PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK);
++ writel(tmp, base + PCIE_MISC_MISC_CTRL);
++
++ ret = brcm_pcie_get_rc_bar2_size_and_offset(pcie, &rc_bar2_size,
++ &rc_bar2_offset);
++ if (ret)
++ return ret;
++
++ tmp = lower_32_bits(rc_bar2_offset);
++ u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(rc_bar2_size),
++ PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK);
++ writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO);
++ writel(upper_32_bits(rc_bar2_offset),
++ base + PCIE_MISC_RC_BAR2_CONFIG_HI);
++
++ scb_size_val = rc_bar2_size ?
++ ilog2(rc_bar2_size) - 15 : 0xf; /* 0xf is 1GB */
++ tmp = readl(base + PCIE_MISC_MISC_CTRL);
++ u32p_replace_bits(&tmp, scb_size_val,
++ PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK);
++ writel(tmp, base + PCIE_MISC_MISC_CTRL);
++
++ /* disable the PCIe->GISB memory window (RC_BAR1) */
++ tmp = readl(base + PCIE_MISC_RC_BAR1_CONFIG_LO);
++ tmp &= ~PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK;
++ writel(tmp, base + PCIE_MISC_RC_BAR1_CONFIG_LO);
++
++ /* disable the PCIe->SCB memory window (RC_BAR3) */
++ tmp = readl(base + PCIE_MISC_RC_BAR3_CONFIG_LO);
++ tmp &= ~PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK;
++ writel(tmp, base + PCIE_MISC_RC_BAR3_CONFIG_LO);
++
++ /* Mask all interrupts since we are not handling any yet */
++ writel(0xffffffff, pcie->base + PCIE_MSI_INTR2_MASK_SET);
++
++ /* clear any interrupts we find on boot */
++ writel(0xffffffff, pcie->base + PCIE_MSI_INTR2_CLR);
++
++ if (pcie->gen)
++ brcm_pcie_set_gen(pcie, pcie->gen);
++
++ /* Unassert the fundamental reset */
++ brcm_pcie_perst_set(pcie, 0);
++
++ /*
++ * Give the RC/EP time to wake up, before trying to configure RC.
++ * Intermittently check status for link-up, up to a total of 100ms.
++ */
++ for (i = 0; i < 100 && !brcm_pcie_link_up(pcie); i += 5)
++ msleep(5);
++
++ if (!brcm_pcie_link_up(pcie)) {
++ dev_err(dev, "link down\n");
++ return -ENODEV;
++ }
++
++ if (!brcm_pcie_rc_mode(pcie)) {
++ dev_err(dev, "PCIe misconfigured; is in EP mode\n");
++ return -EINVAL;
++ }
++
++ resource_list_for_each_entry(entry, &bridge->windows) {
++ res = entry->res;
++
++ if (resource_type(res) != IORESOURCE_MEM)
++ continue;
++
++ if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) {
++ dev_err(pcie->dev, "too many outbound wins\n");
++ return -EINVAL;
++ }
++
++ brcm_pcie_set_outbound_win(pcie, num_out_wins, res->start,
++ res->start - entry->offset,
++ resource_size(res));
++ num_out_wins++;
++ }
++
++ /*
++ * For config space accesses on the RC, show the right class for
++ * a PCIe-PCIe bridge (the default setting is to be EP mode).
++ */
++ tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3);
++ u32p_replace_bits(&tmp, 0x060400,
++ PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK);
++ writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3);
++
++ if (pcie->ssc) {
++ ret = brcm_pcie_set_ssc(pcie);
++ if (ret == 0)
++ ssc_good = true;
++ else
++ dev_err(dev, "failed attempt to enter ssc mode\n");
++ }
++
++ lnksta = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA);
++ cls = FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta);
++ nlw = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta);
++ dev_info(dev, "link up, %s x%u %s\n",
++ PCIE_SPEED2STR(cls + PCI_SPEED_133MHz_PCIX_533),
++ nlw, ssc_good ? "(SSC)" : "(!SSC)");
++
++ /* PCIe->SCB endian mode for BAR */
++ tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1);
++ u32p_replace_bits(&tmp, PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN,
++ PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK);
++ writel(tmp, base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1);
++
++ /*
++ * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
++ * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
++ */
++ tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
++ tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
++ writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
++
++ return 0;
++}
++
++/* L23 is a low-power PCIe link state */
++static void brcm_pcie_enter_l23(struct brcm_pcie *pcie)
++{
++ void __iomem *base = pcie->base;
++ int l23, i;
++ u32 tmp;
++
++ /* Assert request for L23 */
++ tmp = readl(base + PCIE_MISC_PCIE_CTRL);
++ u32p_replace_bits(&tmp, 1, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK);
++ writel(tmp, base + PCIE_MISC_PCIE_CTRL);
++
++ /* Wait up to 36 msec for L23 */
++ tmp = readl(base + PCIE_MISC_PCIE_STATUS);
++ l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK, tmp);
++ for (i = 0; i < 15 && !l23; i++) {
++ usleep_range(2000, 2400);
++ tmp = readl(base + PCIE_MISC_PCIE_STATUS);
++ l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK,
++ tmp);
++ }
++
++ if (!l23)
++ dev_err(pcie->dev, "failed to enter low-power link state\n");
++}
++
++static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
++{
++ void __iomem *base = pcie->base;
++ int tmp;
++
++ if (brcm_pcie_link_up(pcie))
++ brcm_pcie_enter_l23(pcie);
++ /* Assert fundamental reset */
++ brcm_pcie_perst_set(pcie, 1);
++
++ /* Deassert request for L23 in case it was asserted */
++ tmp = readl(base + PCIE_MISC_PCIE_CTRL);
++ u32p_replace_bits(&tmp, 0, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK);
++ writel(tmp, base + PCIE_MISC_PCIE_CTRL);
++
++ /* Turn off SerDes */
++ tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
++ u32p_replace_bits(&tmp, 1, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
++ writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
++
++ /* Shutdown PCIe bridge */
++ brcm_pcie_bridge_sw_init_set(pcie, 1);
++}
++
++static void __brcm_pcie_remove(struct brcm_pcie *pcie)
++{
++ brcm_pcie_turn_off(pcie);
++ clk_disable_unprepare(pcie->clk);
++ clk_put(pcie->clk);
++}
++
++static int brcm_pcie_remove(struct platform_device *pdev)
++{
++ struct brcm_pcie *pcie = platform_get_drvdata(pdev);
++
++ pci_stop_root_bus(pcie->root_bus);
++ pci_remove_root_bus(pcie->root_bus);
++ __brcm_pcie_remove(pcie);
++
++ return 0;
++}
++
++static int brcm_pcie_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct pci_host_bridge *bridge;
++ struct brcm_pcie *pcie;
++ struct pci_bus *child;
++ struct resource *res;
++ int ret;
++
++ bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
++ if (!bridge)
++ return -ENOMEM;
++
++ pcie = pci_host_bridge_priv(bridge);
++ pcie->dev = &pdev->dev;
++ pcie->np = np;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ pcie->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(pcie->base))
++ return PTR_ERR(pcie->base);
++
++ pcie->clk = devm_clk_get_optional(&pdev->dev, "sw_pcie");
++ if (IS_ERR(pcie->clk))
++ return PTR_ERR(pcie->clk);
++
++ ret = of_pci_get_max_link_speed(np);
++ pcie->gen = (ret < 0) ? 0 : ret;
++
++ pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc");
++
++ ret = pci_parse_request_of_pci_ranges(pcie->dev, &bridge->windows,
++ &bridge->dma_ranges, NULL);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(pcie->clk);
++ if (ret) {
++ dev_err(&pdev->dev, "could not enable clock\n");
++ return ret;
++ }
++
++ ret = brcm_pcie_setup(pcie);
++ if (ret)
++ goto fail;
++
++ bridge->dev.parent = &pdev->dev;
++ bridge->busnr = 0;
++ bridge->ops = &brcm_pcie_ops;
++ bridge->sysdata = pcie;
++ bridge->map_irq = of_irq_parse_and_map_pci;
++ bridge->swizzle_irq = pci_common_swizzle;
++
++ ret = pci_scan_root_bus_bridge(bridge);
++ if (ret < 0) {
++ dev_err(pcie->dev, "Scanning root bridge failed\n");
++ goto fail;
++ }
++
++ pci_assign_unassigned_bus_resources(bridge->bus);
++ list_for_each_entry(child, &bridge->bus->children, node)
++ pcie_bus_configure_settings(child);
++ pci_bus_add_devices(bridge->bus);
++ platform_set_drvdata(pdev, pcie);
++ pcie->root_bus = bridge->bus;
++
++ return 0;
++fail:
++ __brcm_pcie_remove(pcie);
++ return ret;
++}
++
++static const struct of_device_id brcm_pcie_match[] = {
++ { .compatible = "brcm,bcm2711-pcie" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, brcm_pcie_match);
++
++static struct platform_driver brcm_pcie_driver = {
++ .probe = brcm_pcie_probe,
++ .remove = brcm_pcie_remove,
++ .driver = {
++ .name = "brcm-pcie",
++ .of_match_table = brcm_pcie_match,
++ },
++};
++module_platform_driver(brcm_pcie_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Broadcom STB PCIe RC driver");
++MODULE_AUTHOR("Broadcom");