diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-5.10/034-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-5.10/034-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch | 104 |
1 files changed, 104 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch new file mode 100644 index 0000000000..562d5a22c7 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/034-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch @@ -0,0 +1,104 @@ +From b6c99228c8edc5e67d8229ba1c5f76cce210ddfc Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com> +Date: Wed, 27 Oct 2021 00:57:06 +0800 +Subject: [PATCH] ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Define the Realtek RTL8365MB switch without interrupt support on the device +tree of Asus RT-AC88U. + +Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> +Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk> +Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> +--- + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 ++++++++++++++++++++ + 1 file changed, 77 insertions(+) + +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -93,6 +93,83 @@ + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; ++ ++ switch { ++ compatible = "realtek,rtl8365mb"; ++ /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */ ++ mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; ++ mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; ++ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; ++ realtek,disable-leds; ++ dsa,member = <1 0>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "lan5"; ++ phy-handle = <ðphy0>; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan6"; ++ phy-handle = <ðphy1>; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan7"; ++ phy-handle = <ðphy2>; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan8"; ++ phy-handle = <ðphy3>; ++ }; ++ ++ port@6 { ++ reg = <6>; ++ label = "cpu"; ++ ethernet = <&sw0_p5>; ++ phy-mode = "rgmii"; ++ tx-internal-delay-ps = <2000>; ++ rx-internal-delay-ps = <2000>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ pause; ++ }; ++ }; ++ }; ++ ++ mdio { ++ compatible = "realtek,smi-mdio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ethphy0: ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ ethphy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ ++ ethphy2: ethernet-phy@2 { ++ reg = <2>; ++ }; ++ ++ ethphy3: ethernet-phy@3 { ++ reg = <3>; ++ }; ++ }; ++ }; + }; + + &srab { |