diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0145-add-backlight-control-to-media-center-overlay.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.14/950-0145-add-backlight-control-to-media-center-overlay.patch | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0145-add-backlight-control-to-media-center-overlay.patch b/target/linux/brcm2708/patches-4.14/950-0145-add-backlight-control-to-media-center-overlay.patch new file mode 100644 index 0000000000..46ab9f7a9d --- /dev/null +++ b/target/linux/brcm2708/patches-4.14/950-0145-add-backlight-control-to-media-center-overlay.patch @@ -0,0 +1,45 @@ +From 857e7afb6b7b60adb1f9ed9e05c3ced0c5ef7370 Mon Sep 17 00:00:00 2001 +From: Aaron Shaw <shawaj@gmail.com> +Date: Thu, 28 Dec 2017 17:34:54 +0000 +Subject: [PATCH 145/454] add backlight control to media-center overlay + +--- + arch/arm/boot/dts/overlays/README | 1 + + .../boot/dts/overlays/media-center-overlay.dts | 16 +++++++++------- + 2 files changed, 10 insertions(+), 7 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1002,6 +1002,7 @@ Params: speed Display + fps Delay between frame updates + xohms Touchpanel sensitivity (X-plate resistance) + swapxy Swap x and y axis ++ backlight Change backlight GPIO pin {e.g. 12, 18} + gpio_out_pin GPIO for output (default "17") + gpio_in_pin GPIO for input (default "18") + gpio_in_pull Pull up/down/off on the input pin +--- a/arch/arm/boot/dts/overlays/media-center-overlay.dts ++++ b/arch/arm/boot/dts/overlays/media-center-overlay.dts +@@ -113,13 +113,15 @@ + }; + + __overrides__ { +- speed = <&rpidisplay>,"spi-max-frequency:0"; +- rotate = <&rpidisplay>,"rotate:0"; +- fps = <&rpidisplay>,"fps:0"; +- debug = <&rpidisplay>,"debug:0", +- <&lirc_rpi>,"rpi,debug:0"; +- xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0"; +- swapxy = <&rpidisplay_ts>,"ti,swap-xy?"; ++ speed = <&rpidisplay>,"spi-max-frequency:0"; ++ rotate = <&rpidisplay>,"rotate:0"; ++ fps = <&rpidisplay>,"fps:0"; ++ debug = <&rpidisplay>,"debug:0", ++ <&lirc_rpi>,"rpi,debug:0"; ++ xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0"; ++ swapxy = <&rpidisplay_ts>,"ti,swap-xy?"; ++ backlight = <&rpidisplay>,"led-gpios:4", ++ <&rpi_display_pins>,"brcm,pins:0"; + + gpio_out_pin = <&lirc_pins>,"brcm,pins:0"; + gpio_in_pin = <&lirc_pins>,"brcm,pins:4"; |