diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch b/target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch new file mode 100644 index 0000000000..37bb4fd61e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0437-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch @@ -0,0 +1,367 @@ +From 9542646d9211ab4305beb75da97f61cc1968ae6c Mon Sep 17 00:00:00 2001 +From: Phil Elwell <phil@raspberrypi.org> +Date: Tue, 28 May 2019 16:36:04 +0100 +Subject: [PATCH] BCM270X_DT: Rename Pi Zero W DT files + +The downtream Pi Zero W dts file uses the digit 0, whereas upstream +chose to spell it out - "zero-w". The firmware has, for a long time, +looked for bcm2708-rpi-zero-w.dtb first before falling back to the +numerical version. Therefore it is better to follow upstream and +make the switch to "bcm2708-rpi-zero-w". + +At the same time, remove some overrides that duplicate values +inherited from the shared .dtsi files. + +Signed-off-by: Phil Elwell <phil@raspberrypi.org> +--- + arch/arm/boot/dts/Makefile | 2 +- + .../boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} | 5 ----- + 2 files changed, 1 insertion(+), 6 deletions(-) + rename arch/arm/boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} (97%) + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -4,7 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2708-rpi-b.dtb \ + bcm2708-rpi-b-plus.dtb \ + bcm2708-rpi-cm.dtb \ +- bcm2708-rpi-0-w.dtb \ ++ bcm2708-rpi-zero-w.dtb \ + bcm2709-rpi-2-b.dtb \ + bcm2710-rpi-3-b.dtb \ + bcm2710-rpi-3-b-plus.dtb \ +--- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts ++++ /dev/null +@@ -1,167 +0,0 @@ +-/dts-v1/; +- +-#include "bcm2708.dtsi" +-#include "bcm283x-rpi-csi1-2lane.dtsi" +- +-/ { +- compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; +- model = "Raspberry Pi Zero W"; +- +- chosen { +- bootargs = "coherent_pool=1M 8250.nr_uarts=1"; +- }; +- +- aliases { +- serial0 = &uart1; +- serial1 = &uart0; +- mmc1 = &mmcnr; +- }; +-}; +- +-&gpio { +- spi0_pins: spi0_pins { +- brcm,pins = <9 10 11>; +- brcm,function = <4>; /* alt0 */ +- }; +- +- spi0_cs_pins: spi0_cs_pins { +- brcm,pins = <8 7>; +- brcm,function = <1>; /* output */ +- }; +- +- i2c0_pins: i2c0 { +- brcm,pins = <0 1>; +- brcm,function = <4>; +- }; +- +- i2c1_pins: i2c1 { +- brcm,pins = <2 3>; +- brcm,function = <4>; +- }; +- +- i2s_pins: i2s { +- brcm,pins = <18 19 20 21>; +- brcm,function = <4>; /* alt0 */ +- }; +- +- sdio_pins: sdio_pins { +- brcm,pins = <34 35 36 37 38 39>; +- brcm,function = <7>; /* ALT3 = SD1 */ +- brcm,pull = <0 2 2 2 2 2>; +- }; +- +- bt_pins: bt_pins { +- brcm,pins = <43>; +- brcm,function = <4>; /* alt0:GPCLK2 */ +- brcm,pull = <0>; /* none */ +- }; +- +- uart0_pins: uart0_pins { +- brcm,pins = <30 31 32 33>; +- brcm,function = <7>; /* alt3=UART0 */ +- brcm,pull = <2 0 0 2>; /* up none none up */ +- }; +- +- uart1_pins: uart1_pins { +- brcm,pins; +- brcm,function; +- brcm,pull; +- }; +- +- audio_pins: audio_pins { +- brcm,pins = <>; +- brcm,function = <>; +- }; +-}; +- +-&mmcnr { +- pinctrl-names = "default"; +- pinctrl-0 = <&sdio_pins>; +- bus-width = <4>; +- status = "okay"; +-}; +- +-&uart0 { +- pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins &bt_pins>; +- status = "okay"; +-}; +- +-&uart1 { +- pinctrl-names = "default"; +- pinctrl-0 = <&uart1_pins>; +- status = "okay"; +-}; +- +-&spi0 { +- pinctrl-names = "default"; +- pinctrl-0 = <&spi0_pins &spi0_cs_pins>; +- cs-gpios = <&gpio 8 1>, <&gpio 7 1>; +- +- spidev0: spidev@0{ +- compatible = "spidev"; +- reg = <0>; /* CE0 */ +- #address-cells = <1>; +- #size-cells = <0>; +- spi-max-frequency = <125000000>; +- }; +- +- spidev1: spidev@1{ +- compatible = "spidev"; +- reg = <1>; /* CE1 */ +- #address-cells = <1>; +- #size-cells = <0>; +- spi-max-frequency = <125000000>; +- }; +-}; +- +-&i2c0 { +- pinctrl-names = "default"; +- pinctrl-0 = <&i2c0_pins>; +- clock-frequency = <100000>; +-}; +- +-&i2c1 { +- pinctrl-names = "default"; +- pinctrl-0 = <&i2c1_pins>; +- clock-frequency = <100000>; +-}; +- +-&i2c2 { +- clock-frequency = <100000>; +-}; +- +-&i2s { +- #sound-dai-cells = <0>; +- pinctrl-names = "default"; +- pinctrl-0 = <&i2s_pins>; +-}; +- +-&random { +- status = "okay"; +-}; +- +-&leds { +- act_led: act { +- label = "led0"; +- linux,default-trigger = "mmc0"; +- gpios = <&gpio 47 0>; +- }; +-}; +- +-&hdmi { +- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +-}; +- +-&audio { +- pinctrl-names = "default"; +- pinctrl-0 = <&audio_pins>; +-}; +- +-/ { +- __overrides__ { +- act_led_gpio = <&act_led>,"gpios:4"; +- act_led_activelow = <&act_led>,"gpios:8"; +- act_led_trigger = <&act_led>,"linux,default-trigger"; +- }; +-}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts +@@ -0,0 +1,162 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; ++ model = "Raspberry Pi Zero W"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc1 = &mmcnr; ++ }; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; /* none */ ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <30 31 32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <2 0 0 2>; /* up none none up */ ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ }; ++}; |