1 files changed, 113 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0734-overlays-Add-w5500-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0734-overlays-Add-w5500-overlay.patch
new file mode 100644
index 0000000000..2641a5b0b1
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0734-overlays-Add-w5500-overlay.patch
@@ -0,0 +1,113 @@
+From cb9a896a799393b3cb5947bef3c95eb5ffb44776 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Thu, 10 Oct 2019 09:08:47 +0100
+Subject: [PATCH] overlays: Add w5500 overlay
+
+Add an overlay to configure the Wiznet W5500 Ethernet controller on
+SPI0. The 'cs' parameter chooses the Chip Select (default 0).
+
+See: https://github.com/raspberrypi/linux/issues/3276
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/overlays/Makefile          |  1 +
+ arch/arm/boot/dts/overlays/README            | 10 ++++
+ arch/arm/boot/dts/overlays/w5500-overlay.dts | 63 ++++++++++++++++++++
+ 3 files changed, 74 insertions(+)
+ create mode 100644 arch/arm/boot/dts/overlays/w5500-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -183,6 +183,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ 	vga666.dtbo \
+ 	w1-gpio.dtbo \
+ 	w1-gpio-pullup.dtbo \
++	w5500.dtbo \
+ 	wittypi.dtbo
+ 
+ targets += dtbs dtbs_install
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -2538,6 +2538,16 @@ Params: gpiopin                 GPIO for
+         pullup                  Now enabled by default (ignored)
+ 
+ 
++Name:   w5500
++Info:   Overlay for the Wiznet W5500 Ethernet Controller on SPI0
++Load:   dtoverlay=w5500,<param>=<val>
++Params: int_pin                 GPIO used for INT (default 25)
++
++        speed                   SPI bus speed (default 30000000)
++
++        cs                      SPI bus Chip Select (default 0)
++
++
+ Name:   wittypi
+ Info:   Configures the wittypi RTC module.
+ Load:   dtoverlay=wittypi,<param>=<val>
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/w5500-overlay.dts
+@@ -0,0 +1,63 @@
++// Overlay for the Wiznet w5500 Ethernet Controller
++/dts-v1/;
++/plugin/;
++
++/ {
++	compatible = "brcm,bcm2835";
++
++	fragment@0 {
++		target = <&spidev0>;
++		__overlay__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@1 {
++		target = <&spidev1>;
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@2 {
++		target = <&spi0>;
++		__overlay__ {
++			/* needed to avoid dtc warning */
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			status = "okay";
++
++			eth1: w5500@0{
++				compatible = "wiznet,w5500";
++				reg = <0>; /* CE0 */
++				pinctrl-names = "default";
++				pinctrl-0 = <&eth1_pins>;
++				interrupt-parent = <&gpio>;
++				interrupts = <25 0x8>;
++				spi-max-frequency = <30000000>;
++//				local-mac-address = [aa bb cc dd ee ff];
++				status = "okay";
++			};
++		};
++	};
++
++	fragment@3 {
++		target = <&gpio>;
++		__overlay__ {
++			eth1_pins: eth1_pins {
++				brcm,pins = <25>;
++				brcm,function = <0>; /* in */
++				brcm,pull = <0>; /* none */
++			};
++		};
++	};
++
++	__overrides__ {
++		int_pin = <&eth1>, "interrupts:0",
++		          <&eth1_pins>, "brcm,pins:0";
++		speed   = <&eth1>, "spi-max-frequency:0";
++		cs      = <&eth1>, "reg:0",
++			  <0>, "!0=1";
++	};
++};