diff options
Diffstat (limited to 'target/linux/generic/pending-3.18/027-bcma-from-4.1.patch')
| -rw-r--r-- | target/linux/generic/pending-3.18/027-bcma-from-4.1.patch | 680 |
1 files changed, 0 insertions, 680 deletions
diff --git a/target/linux/generic/pending-3.18/027-bcma-from-4.1.patch b/target/linux/generic/pending-3.18/027-bcma-from-4.1.patch deleted file mode 100644 index c88a816fef..0000000000 --- a/target/linux/generic/pending-3.18/027-bcma-from-4.1.patch +++ /dev/null @@ -1,680 +0,0 @@ ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -24,6 +24,7 @@ bool bcma_wait_value(struct bcma_device - int timeout); - void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core); - void bcma_init_bus(struct bcma_bus *bus); -+void bcma_unregister_cores(struct bcma_bus *bus); - int bcma_bus_register(struct bcma_bus *bus); - void bcma_bus_unregister(struct bcma_bus *bus); - int __init bcma_bus_early_register(struct bcma_bus *bus); -@@ -40,6 +41,9 @@ int bcma_bus_scan(struct bcma_bus *bus); - int bcma_sprom_get(struct bcma_bus *bus); - - /* driver_chipcommon.c */ -+void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); -+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); -+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); - #ifdef CONFIG_BCMA_DRIVER_MIPS - void bcma_chipco_serial_init(struct bcma_drv_cc *cc); - extern struct platform_device bcma_pflash_dev; -@@ -50,6 +54,8 @@ int bcma_core_chipcommon_b_init(struct b - void bcma_core_chipcommon_b_free(struct bcma_drv_cc_b *ccb); - - /* driver_chipcommon_pmu.c */ -+void bcma_pmu_early_init(struct bcma_drv_cc *cc); -+void bcma_pmu_init(struct bcma_drv_cc *cc); - u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc); - u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc); - -@@ -98,7 +104,35 @@ static inline void __exit bcma_host_soc_ - #endif /* CONFIG_BCMA_HOST_SOC && CONFIG_OF */ - - /* driver_pci.c */ -+#ifdef CONFIG_BCMA_DRIVER_PCI - u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); -+void bcma_core_pci_early_init(struct bcma_drv_pci *pc); -+void bcma_core_pci_init(struct bcma_drv_pci *pc); -+void bcma_core_pci_up(struct bcma_drv_pci *pc); -+void bcma_core_pci_down(struct bcma_drv_pci *pc); -+#else -+static inline void bcma_core_pci_early_init(struct bcma_drv_pci *pc) -+{ -+ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI); -+} -+static inline void bcma_core_pci_init(struct bcma_drv_pci *pc) -+{ -+ /* Initialization is required for PCI hosted bus */ -+ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI); -+} -+#endif -+ -+/* driver_pcie2.c */ -+#ifdef CONFIG_BCMA_DRIVER_PCI -+void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2); -+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2); -+#else -+static inline void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2) -+{ -+ /* Initialization is required for PCI hosted bus */ -+ WARN_ON(pcie2->core->bus->hosttype == BCMA_HOSTTYPE_PCI); -+} -+#endif - - extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc); - -@@ -115,6 +149,39 @@ static inline void bcma_core_pci_hostmod - } - #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ - -+/************************************************** -+ * driver_mips.c -+ **************************************************/ -+ -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+unsigned int bcma_core_mips_irq(struct bcma_device *dev); -+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); -+void bcma_core_mips_init(struct bcma_drv_mips *mcore); -+#else -+static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev) -+{ -+ return 0; -+} -+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) -+{ -+} -+static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) -+{ -+} -+#endif -+ -+/************************************************** -+ * driver_gmac_cmn.c -+ **************************************************/ -+ -+#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN -+void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc); -+#else -+static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) -+{ -+} -+#endif -+ - #ifdef CONFIG_BCMA_DRIVER_GPIO - /* driver_gpio.c */ - int bcma_gpio_init(struct bcma_drv_cc *cc); ---- a/drivers/bcma/driver_gpio.c -+++ b/drivers/bcma/driver_gpio.c -@@ -17,6 +17,8 @@ - - #include "bcma_private.h" - -+#define BCMA_GPIO_MAX_PINS 32 -+ - static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip) - { - return container_of(chip, struct bcma_drv_cc, gpio); -@@ -76,7 +78,7 @@ static void bcma_gpio_free(struct gpio_c - bcma_chipco_gpio_pullup(cc, 1 << gpio, 0); - } - --#if IS_BUILTIN(CONFIG_BCM47XX) -+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X) - static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) - { - struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); -@@ -204,6 +206,7 @@ static void bcma_gpio_irq_domain_exit(st - - int bcma_gpio_init(struct bcma_drv_cc *cc) - { -+ struct bcma_bus *bus = cc->core->bus; - struct gpio_chip *chip = &cc->gpio; - int err; - -@@ -215,14 +218,14 @@ int bcma_gpio_init(struct bcma_drv_cc *c - chip->set = bcma_gpio_set_value; - chip->direction_input = bcma_gpio_direction_input; - chip->direction_output = bcma_gpio_direction_output; --#if IS_BUILTIN(CONFIG_BCM47XX) -+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X) - chip->to_irq = bcma_gpio_to_irq; - #endif - #if IS_BUILTIN(CONFIG_OF) - if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) - chip->of_node = cc->core->dev.of_node; - #endif -- switch (cc->core->bus->chipinfo.id) { -+ switch (bus->chipinfo.id) { - case BCMA_CHIP_ID_BCM5357: - case BCMA_CHIP_ID_BCM53572: - chip->ngpio = 32; -@@ -231,13 +234,17 @@ int bcma_gpio_init(struct bcma_drv_cc *c - chip->ngpio = 16; - } - -- /* There is just one SoC in one device and its GPIO addresses should be -- * deterministic to address them more easily. The other buses could get -- * a random base number. */ -- if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) -- chip->base = 0; -- else -- chip->base = -1; -+ /* -+ * On MIPS we register GPIO devices (LEDs, buttons) using absolute GPIO -+ * pin numbers. We don't have Device Tree there and we can't really use -+ * relative (per chip) numbers. -+ * So let's use predictable base for BCM47XX and "random" for all other. -+ */ -+#if IS_BUILTIN(CONFIG_BCM47XX) -+ chip->base = bus->num * BCMA_GPIO_MAX_PINS; -+#else -+ chip->base = -1; -+#endif - - err = bcma_gpio_irq_domain_init(cc); - if (err) ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm - } - EXPORT_SYMBOL_GPL(bcma_core_pci_power_save); - --int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, -- bool enable) --{ -- struct pci_dev *pdev; -- u32 coremask, tmp; -- int err = 0; -- -- if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) { -- /* This bcma device is not on a PCI host-bus. So the IRQs are -- * not routed through the PCI core. -- * So we must not enable routing through the PCI core. */ -- goto out; -- } -- -- pdev = pc->core->bus->host_pci; -- -- err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); -- if (err) -- goto out; -- -- coremask = BIT(core->core_index) << 8; -- if (enable) -- tmp |= coremask; -- else -- tmp &= ~coremask; -- -- err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); -- --out: -- return err; --} --EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); -- - static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) - { - u32 w; -@@ -328,28 +295,12 @@ static void bcma_core_pci_extend_L1timer - bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); - } - --void bcma_core_pci_up(struct bcma_bus *bus) -+void bcma_core_pci_up(struct bcma_drv_pci *pc) - { -- struct bcma_drv_pci *pc; -- -- if (bus->hosttype != BCMA_HOSTTYPE_PCI) -- return; -- -- pc = &bus->drv_pci[0]; -- - bcma_core_pci_extend_L1timer(pc, true); - } --EXPORT_SYMBOL_GPL(bcma_core_pci_up); - --void bcma_core_pci_down(struct bcma_bus *bus) -+void bcma_core_pci_down(struct bcma_drv_pci *pc) - { -- struct bcma_drv_pci *pc; -- -- if (bus->hosttype != BCMA_HOSTTYPE_PCI) -- return; -- -- pc = &bus->drv_pci[0]; -- - bcma_core_pci_extend_L1timer(pc, false); - } --EXPORT_SYMBOL_GPL(bcma_core_pci_down); ---- a/drivers/bcma/driver_pci_host.c -+++ b/drivers/bcma/driver_pci_host.c -@@ -11,6 +11,7 @@ - - #include "bcma_private.h" - #include <linux/pci.h> -+#include <linux/slab.h> - #include <linux/export.h> - #include <linux/bcma/bcma.h> - #include <asm/paccess.h> ---- a/drivers/bcma/driver_pcie2.c -+++ b/drivers/bcma/driver_pcie2.c -@@ -10,6 +10,7 @@ - - #include "bcma_private.h" - #include <linux/bcma/bcma.h> -+#include <linux/pci.h> - - /************************************************** - * R/W ops. -@@ -156,14 +157,23 @@ static void pciedev_reg_pm_clk_period(st - - void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2) - { -- struct bcma_chipinfo *ci = &pcie2->core->bus->chipinfo; -+ struct bcma_bus *bus = pcie2->core->bus; -+ struct bcma_chipinfo *ci = &bus->chipinfo; - u32 tmp; - - tmp = pcie2_read32(pcie2, BCMA_CORE_PCIE2_SPROM(54)); - if ((tmp & 0xe) >> 1 == 2) - bcma_core_pcie2_cfg_write(pcie2, 0x4e0, 0x17); - -- /* TODO: Do we need pcie_reqsize? */ -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM4360: -+ case BCMA_CHIP_ID_BCM4352: -+ pcie2->reqsize = 1024; -+ break; -+ default: -+ pcie2->reqsize = 128; -+ break; -+ } - - if (ci->id == BCMA_CHIP_ID_BCM4360 && ci->rev > 3) - bcma_core_pcie2_war_delay_perst_enab(pcie2, true); -@@ -173,3 +183,18 @@ void bcma_core_pcie2_init(struct bcma_dr - pciedev_crwlpciegen2_180(pcie2); - pciedev_crwlpciegen2_182(pcie2); - } -+ -+/************************************************** -+ * Runtime ops. -+ **************************************************/ -+ -+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2) -+{ -+ struct bcma_bus *bus = pcie2->core->bus; -+ struct pci_dev *dev = bus->host_pci; -+ int err; -+ -+ err = pcie_set_readrq(dev, pcie2->reqsize); -+ if (err) -+ bcma_err(bus, "Error setting PCI_EXP_DEVCTL_READRQ: %d\n", err); -+} ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -213,16 +213,26 @@ static int bcma_host_pci_probe(struct pc - /* Initialize struct, detect chip */ - bcma_init_bus(bus); - -+ /* Scan bus to find out generation of PCIe core */ -+ err = bcma_bus_scan(bus); -+ if (err) -+ goto err_pci_unmap_mmio; -+ -+ if (bcma_find_core(bus, BCMA_CORE_PCIE2)) -+ bus->host_is_pcie2 = true; -+ - /* Register */ - err = bcma_bus_register(bus); - if (err) -- goto err_pci_unmap_mmio; -+ goto err_unregister_cores; - - pci_set_drvdata(dev, bus); - - out: - return err; - -+err_unregister_cores: -+ bcma_unregister_cores(bus); - err_pci_unmap_mmio: - pci_iounmap(dev, bus->mmio); - err_pci_release_regions: -@@ -283,9 +293,12 @@ static const struct pci_device_id bcma_p - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43b1) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */ - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */ -@@ -310,3 +323,65 @@ void __exit bcma_host_pci_exit(void) - { - pci_unregister_driver(&bcma_pci_bridge_driver); - } -+ -+/************************************************** -+ * Runtime ops for drivers. -+ **************************************************/ -+ -+/* See also pcicore_up */ -+void bcma_host_pci_up(struct bcma_bus *bus) -+{ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ if (bus->host_is_pcie2) -+ bcma_core_pcie2_up(&bus->drv_pcie2); -+ else -+ bcma_core_pci_up(&bus->drv_pci[0]); -+} -+EXPORT_SYMBOL_GPL(bcma_host_pci_up); -+ -+/* See also pcicore_down */ -+void bcma_host_pci_down(struct bcma_bus *bus) -+{ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ if (!bus->host_is_pcie2) -+ bcma_core_pci_down(&bus->drv_pci[0]); -+} -+EXPORT_SYMBOL_GPL(bcma_host_pci_down); -+ -+/* See also si_pci_setup */ -+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core, -+ bool enable) -+{ -+ struct pci_dev *pdev; -+ u32 coremask, tmp; -+ int err = 0; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) { -+ /* This bcma device is not on a PCI host-bus. So the IRQs are -+ * not routed through the PCI core. -+ * So we must not enable routing through the PCI core. */ -+ goto out; -+ } -+ -+ pdev = bus->host_pci; -+ -+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); -+ if (err) -+ goto out; -+ -+ coremask = BIT(core->core_index) << 8; -+ if (enable) -+ tmp |= coremask; -+ else -+ tmp &= ~coremask; -+ -+ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); -+ -+out: -+ return err; -+} -+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl); ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -363,7 +363,7 @@ static int bcma_register_devices(struct - return 0; - } - --static void bcma_unregister_cores(struct bcma_bus *bus) -+void bcma_unregister_cores(struct bcma_bus *bus) - { - struct bcma_device *core, *tmp; - ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c -@@ -4770,7 +4770,7 @@ static void b43_wireless_core_exit(struc - switch (dev->dev->bus_type) { - #ifdef CONFIG_B43_BCMA - case B43_BUS_BCMA: -- bcma_core_pci_down(dev->dev->bdev->bus); -+ bcma_host_pci_down(dev->dev->bdev->bus); - break; - #endif - #ifdef CONFIG_B43_SSB -@@ -4817,9 +4817,9 @@ static int b43_wireless_core_init(struct - switch (dev->dev->bus_type) { - #ifdef CONFIG_B43_BCMA - case B43_BUS_BCMA: -- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0], -+ bcma_host_pci_irq_ctl(dev->dev->bdev->bus, - dev->dev->bdev, true); -- bcma_core_pci_up(dev->dev->bdev->bus); -+ bcma_host_pci_up(dev->dev->bdev->bus); - break; - #endif - #ifdef CONFIG_B43_SSB ---- a/drivers/net/wireless/brcm80211/brcmsmac/main.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c -@@ -4669,7 +4669,7 @@ static int brcms_b_attach(struct brcms_c - brcms_c_coredisable(wlc_hw); - - /* Match driver "down" state */ -- bcma_core_pci_down(wlc_hw->d11core->bus); -+ bcma_host_pci_down(wlc_hw->d11core->bus); - - /* turn off pll and xtal to match driver "down" state */ - brcms_b_xtal(wlc_hw, OFF); -@@ -4960,7 +4960,7 @@ static int brcms_b_up_prep(struct brcms_ - * Configure pci/pcmcia here instead of in brcms_c_attach() - * to allow mfg hotswap: down, hotswap (chip power cycle), up. - */ -- bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci[0], wlc_hw->d11core, -+ bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core, - true); - - /* -@@ -4970,12 +4970,12 @@ static int brcms_b_up_prep(struct brcms_ - */ - if (brcms_b_radio_read_hwdisabled(wlc_hw)) { - /* put SB PCI in down state again */ -- bcma_core_pci_down(wlc_hw->d11core->bus); -+ bcma_host_pci_down(wlc_hw->d11core->bus); - brcms_b_xtal(wlc_hw, OFF); - return -ENOMEDIUM; - } - -- bcma_core_pci_up(wlc_hw->d11core->bus); -+ bcma_host_pci_up(wlc_hw->d11core->bus); - - /* reset the d11 core */ - brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); -@@ -5172,7 +5172,7 @@ static int brcms_b_down_finish(struct br - - /* turn off primary xtal and pll */ - if (!wlc_hw->noreset) { -- bcma_core_pci_down(wlc_hw->d11core->bus); -+ bcma_host_pci_down(wlc_hw->d11core->bus); - brcms_b_xtal(wlc_hw, OFF); - } - } ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -435,6 +435,27 @@ static inline struct bcma_device *bcma_f - return bcma_find_core_unit(bus, coreid, 0); - } - -+#ifdef CONFIG_BCMA_HOST_PCI -+extern void bcma_host_pci_up(struct bcma_bus *bus); -+extern void bcma_host_pci_down(struct bcma_bus *bus); -+extern int bcma_host_pci_irq_ctl(struct bcma_bus *bus, -+ struct bcma_device *core, bool enable); -+#else -+static inline void bcma_host_pci_up(struct bcma_bus *bus) -+{ -+} -+static inline void bcma_host_pci_down(struct bcma_bus *bus) -+{ -+} -+static inline int bcma_host_pci_irq_ctl(struct bcma_bus *bus, -+ struct bcma_device *core, bool enable) -+{ -+ if (bus->hosttype == BCMA_HOSTTYPE_PCI) -+ return -ENOTSUPP; -+ return 0; -+} -+#endif -+ - extern bool bcma_core_is_enabled(struct bcma_device *core); - extern void bcma_core_disable(struct bcma_device *core, u32 flags); - extern int bcma_core_enable(struct bcma_device *core, u32 flags); ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -238,13 +238,13 @@ struct bcma_drv_pci { - #define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val) - #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) - --extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc); --extern void bcma_core_pci_init(struct bcma_drv_pci *pc); --extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, -- struct bcma_device *core, bool enable); --extern void bcma_core_pci_up(struct bcma_bus *bus); --extern void bcma_core_pci_down(struct bcma_bus *bus); -+#ifdef CONFIG_BCMA_DRIVER_PCI - extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up); -+#else -+static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up) -+{ -+} -+#endif - - extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); - extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ---- a/include/linux/bcma/bcma_driver_pcie2.h -+++ b/include/linux/bcma/bcma_driver_pcie2.h -@@ -143,6 +143,8 @@ - - struct bcma_drv_pcie2 { - struct bcma_device *core; -+ -+ u16 reqsize; - }; - - #define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset) -@@ -153,6 +155,4 @@ struct bcma_drv_pcie2 { - #define pcie2_set32(pcie2, offset, set) bcma_set32((pcie2)->core, offset, set) - #define pcie2_mask32(pcie2, offset, mask) bcma_mask32((pcie2)->core, offset, mask) - --void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2); -- - #endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */ ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE - config BCMA_HOST_PCI - bool "Support for BCMA on PCI-host bus" - depends on BCMA_HOST_PCI_POSSIBLE -+ select BCMA_DRIVER_PCI - default y - - config BCMA_DRIVER_PCI_HOSTMODE -@@ -44,6 +45,22 @@ config BCMA_HOST_SOC - - If unsure, say N - -+config BCMA_DRIVER_PCI -+ bool "BCMA Broadcom PCI core driver" -+ depends on BCMA && PCI -+ default y -+ help -+ BCMA bus may have many versions of PCIe core. This driver -+ supports: -+ 1) PCIe core working in clientmode -+ 2) PCIe Gen 2 clientmode core -+ -+ In general PCIe (Gen 2) clientmode core is required on PCIe -+ hosted buses. It's responsible for initialization and basic -+ hardware management. -+ This driver is also prerequisite for a hostmode PCIe core -+ support. -+ - config BCMA_DRIVER_MIPS - bool "BCMA Broadcom MIPS core driver" - depends on BCMA && MIPS ---- a/drivers/bcma/Makefile -+++ b/drivers/bcma/Makefile -@@ -3,8 +3,8 @@ bcma-y += driver_chipcommon.o driver - bcma-y += driver_chipcommon_b.o - bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o - bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o --bcma-y += driver_pci.o --bcma-y += driver_pcie2.o -+bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pci.o -+bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pcie2.o - bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o - bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o - bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -663,14 +663,6 @@ struct bcma_drv_cc_b { - #define bcma_cc_maskset32(cc, offset, mask, set) \ - bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) - --extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); --extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); -- --extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); --extern void bcma_chipco_resume(struct bcma_drv_cc *cc); -- --void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); -- - extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); - - extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc); -@@ -690,9 +682,6 @@ u32 bcma_chipco_gpio_pullup(struct bcma_ - u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value); - - /* PMU support */ --extern void bcma_pmu_init(struct bcma_drv_cc *cc); --extern void bcma_pmu_early_init(struct bcma_drv_cc *cc); -- - extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, - u32 value); - extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, ---- a/include/linux/bcma/bcma_driver_gmac_cmn.h -+++ b/include/linux/bcma/bcma_driver_gmac_cmn.h -@@ -91,10 +91,4 @@ struct bcma_drv_gmac_cmn { - #define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val) - #define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val) - --#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN --extern void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc); --#else --static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { } --#endif -- - #endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */ ---- a/include/linux/bcma/bcma_driver_mips.h -+++ b/include/linux/bcma/bcma_driver_mips.h -@@ -39,21 +39,6 @@ struct bcma_drv_mips { - u8 early_setup_done:1; - }; - --#ifdef CONFIG_BCMA_DRIVER_MIPS --extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); --extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); -- --extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); --#else --static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } --static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } -- --static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev) --{ -- return 0; --} --#endif -- - extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); - - #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ |